_________ SWAT MAGAZINE ISSUE THIRTY THREE SEPTEMBER __________ / \___________________________________________/ \ / PBX GUIDE PART ONE B.T Revelation \ / F3 \ ----------------------------------------------------------------------- _________ /____/_ / F-3.org.uk /___/__< < F3@F-3.org.uk /_/ |____/ 20.09.00 *.* *.* Right no long boring intro, a collection of guides to PBX's currently popular in the U.K -- And probably abroad. Learn from the information or more realistically play with the information. want info on a certain system? Drop me an e-mail. --F3-- ------------B.T Revelation------------------- GENERAL DESCRIPTION Small wall-mounted Hybrid/PBX system which comes in four sizes, 1+6, 2+6, 3+9, 4+12. The 1+6, 2+6, 3+9 may be extended in stages to the maximum capacity. The basic system is connected to analogue MF or LD exchange lines. There is an optional ISDN2 Access Unit which allows for alternative voice connections to either one or two ISDN2 Basic Rate Access connections. Numbering range: 20 - 31 Power Fail : Each line has one socket attatched Exchange calling : LOOP Approved Signalling : MF4/LD Cleardown time : 100 mS SOCKET WIRING: IDC Wire Colour LJU A Blue/white 2 B White/blue 5 C Green/white 1 D White/green 6 X Orange/white 3 X White/orange 4 100 ohms or 700 metres for Systemphone extensions. 200 ohms or 1400 metres for approved telephone extensions. 336 ohms or 2 kilometres for the 2 wire external extension. ADMINISTRATION PROGRAMMING From the programming extension systemphone. Do not lift the handset. Enter the access code Enter the access PIN The display shows the prompt Dial admin code. Enter the required admin code. Enter any required data. To enter another admin code, step back to the Dial admin code prompt by pressing #. Some features require you to press # more than once. To finish programming, press HANDS FREE ADMINISTRATION PROGRAMMING CODES FEATURE : ADMIN CODE : DEFAULT SETTING Advisory message change pre-programmed text : *4 : 1 Phone 2 Return at 3 Return by 4 Call Back At 5 At a Meeting 6 At Lunch 7 At home 8 Call 9 Holiday Access (PIN) : 0 : 111 Call logging info enable/disable : 99 : Disabled Call waiting tone : 95 : No extensions receive call waiting tone CDS: Associating names and extensions with CDS numbers : *8 : None CLIR (ISDN) : 30 : No extensions programmed COLR (ISDN) : 31 : No extensions programmed 3.1 Khz ISDN calls : 32 : No extensions programmed Divert to/from - set/verify/cancel : 90 : No diversion Divert on busy - set/verify/cancel : 91 : No diversion Divert on no answer -set/verify/cancel : 92 : No diversion Extension access to outgoing line : 8 : All Extension class of service - day service : 6 : 1 Extension class of service - night service : 7 : 1 Extension names : *3 : Extension numbers Incoming ringing telephones day service : 1 : Extensions 20 - 25 and Central Bell Incoming ringing telephones night service : 2 : Extensions 20 - 25 and Central Bell Manager/Secretary Programming (Version D or later software only) : 97 : None Night service - automatic day service time : *2 : No time programmed Night service - automatic night service time: *1 : No time programmed On Hold Options - (Version D or later software only) Music/Tone/Silence on Hold : 98 : 1+6 Tone on Hold 2+6, 3+9, 4+12 Music on Hold Speed dial numbers (system) - add/delete : 5 : ----- Speed dial numbers (system) - class of service override : 96 : No Extensions Systemphones which may not be paged : *9 : All systemphones may be paged System- wide class 5 restriction enable/disable : *0 : Disabled Recording a personalised greeting (Version L or later software) : *5 : No message recorded Replaying a personalised greeting : *6 : No message recorded Time and date : 4 : 00:00 01-01-95 Voice Module: Lines on which voice module activated by keying 35* rsion D or later software only) : 94 : All lines except fax detect lines Voice Module: Ring Time before voice module activation (Version D or later software only) : 93 : 05 seconds TELEPHONE FEATURE CODES Feature : Code Advisory messages : 45 0-9 Alarm call : 75 Baby monitor : 39 Call back Recall : 44 Call back message - lighting the MESSAGE light on a Systemphone Recall : 45 Call waiting tone protection - during a call Recall : 58 Call waiting tone protection - not during a call : 58 Conference Recall : 3 Divert from : 49 XX Divert on busy : 47 XX Divert on no answer : 46 XX Divert to (all) : 48 XX Do not disturb - set/cancel : 42 Door open : 36 Extensions : 20 - 31 Extension lock programme : 40 XXX Extension lock/unlock : 41 XXX Forward recall Recall : 50 Incoming call pick up (all incoming calls) (Version J and L software only) : 8 Incoming call pick up (all incoming calls) (Version D and later software only) : 66 Line access : 9 Line access 1 - 4 : 51 - 54 Line access groups 1 - 3 : 71 - 73 Night service - on/off (extension 20 only) : 78 Operator/extension : 20 0 Page - Systemphones : 34 PA - answer : 74 Park - park a call Recall : 57 Park - retrieve a parked call : 57 Phone pick-up (extension) : 43 XX Phone reset : 79 Redial : 60 Speed dial - accessing personal numbers : 61 0 - 9 Speed dial - programming personal numbers : 62 0 - 9 Speed dial - accessing system numbers (Version J and L software only) : 050 - 699 Speed dial - accessing system numbers (Version D or later software) 800 - 899 Voice call : 33 CONFIGURATION PROGRAMMING From the programming extension systemphone . Do not lift the handset. Enter the access code (76517) The display shows Dial config code Enter the required config code. Enter any required data. To finish programming, press HANDS FREE CONFIGURATION PROGRAMMING CODES Feature : Admin code : Default setting Equipped exchange lines : 0 : All lines equipped Exchange lines equipped in groups accessed by 71, 72 and 73 : 1 : All lines in group 1 accessed by 71 Hold indication - steady or flashing : 2 : Steady (0) PABX access digit : 3 : None programmed MF/LD signalling on exchange lines : 4 : MF Incoming calls only on an exchange line : 50 : All lines connected for incoming and outgoing calls Disconnection of an extension : 51 : All extensions connected Recall timing for unanswered external transferred calls and calls placed on hold. : 52 : 30 seconds Divert on no answer timing : 53 : 11 seconds Tone on hold - enable/disable (Version J and L software only) : 54 : Disabled (0) Facsimile tone detection -enable/disable : 55 : Disabled CDS enable/disable : 56 : Disabled (0) ISDN2 access programming : 57 : Disabled ( But if IAU fitted then programmed for lines 1 & 2) Exchange line dial tone presented to extensions - enable/disable : 58 : Disabled (0) Dial tone detect for PBX access code : 59 : On PA equipped - enable/disable : 7 : Disabled Specify position for system programming after initial set-up : 8 : 20 Specify if incoming ringing cycle is required : 90 : Not programmed Forward recall signal - earth recall or timed break : 91 : Timed Break 80 ms (2) Programming DISA : 93 : Disabled Entering codes for class of service restriction and exception : 94 : No codes entered Displaying and removing codes for class of service restriction and exception : 95 : No codes entered Programming a Doorphone : 97 : Not programmed (0) Programming the type of Doorphone : 98 : Doorphone with call button (0) ************************* System reset : 99 : N/A ************************* Voice Module - enable/disable : *0 : Disabled (0) Incoming exchange line call : handling (Systemphones only) : *3 : Answer by going off-hook (1) Allocating MSN/DDI numbers to extensions : *4 : No numbers are allocated ISDN2 Pabx lines : *6 : Not programmed Point to Point or Point to Multipoint : *7 : Both lines are PMP --F3--