
ALCATEL-IND1-E-SERVICE-MIB DEFINITIONS ::= BEGIN

        IMPORTS
                MODULE-IDENTITY, 
                OBJECT-IDENTITY,
		OBJECT-TYPE, 
                Integer32, Counter64	        FROM SNMPv2-SMI
                Counter32	                    FROM SNMPv2-SMI
		OBJECT-GROUP, 
                MODULE-COMPLIANCE	        FROM SNMPv2-CONF
		softentIND1eService    	        FROM ALCATEL-IND1-BASE
		RowStatus, 
                TEXTUAL-CONVENTION,
                DisplayString,
                MacAddress			FROM SNMPv2-TC
		InterfaceIndex 			FROM IF-MIB
                SnmpAdminString                 FROM SNMP-FRAMEWORK-MIB
		;

        alcatelIND1EServiceMIB MODULE-IDENTITY
		LAST-UPDATED "201910070000Z"
		ORGANIZATION "ALE USA Inc"
		CONTACT-INFO
                "Please consult with Customer Service to ensure the most appropriate
                version of this document is used with the products in question:
 	
				                   Alcatel-Lucent Enterprise, 			                    	
				                         26801 West Agoura Road
			 	                       Agoura Hills, CA  91301-5122
			      		                United States Of America
	
                Telephone:               +1 800 995 2696 
 				     	
                Electronic Mail:	 ebg_global_supportcenter@al-enterprise.com 
                World Wide Web:		 https://www.al-enterprise.com"
               
                DESCRIPTION
                "The parameters for configuration of the E-Service feature.

                The right to make changes in specification and other information
                contained in this document without prior notice is reserved.

                No liability shall be assumed for any incidental, indirect, special, or
                consequential damages whatsoever arising from or related to this 
                document or the information contained herein.

                Vendors, end-users, and other interested parties are granted
                non-exclusive license to use this specification in connection with 
                management of the products for which it is intended to be used.

 					Copyright (C) ALE USA Inc. 2014-2019                               
					Copyright (C) 1995-2013 Alcatel-Lucent
	                                ALL RIGHTS RESERVED WORLDWIDE"

		REVISION     "201001190000Z"
		DESCRIPTION
			 "The below listed objects are made as read-create in 6.6.1.680.R01
				  Post GA.
				alaEServiceUNIProfile8021xTreatment, alaEServiceUNIProfile8021ABTreatment,
				alaEServiceUNIProfile8023adTreatment & alaEServiceUNIProfileAmapTreatment."
           
               REVISION      "201910070000Z"
	       DESCRIPTION
                         "Updated the latest contact and Copyright information for ALE USA Inc."

		::= { softentIND1eService 1}
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

-- Textual Conventions

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

AlaEServiceUNIProfileProtocolTreatment ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The behavior of the bridge in regards to the given protocols packets received on 
        the UNI. Tunnel (1) enables the packets to be tunneled across the provider 
        network.  Discard (2) causes the packets to be discarded and not enter
        the provider network. Peer (3) means that on this port the bridge is to 
        participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling."
        SYNTAX   INTEGER
        {
                tunnel (1),
                drop (2),
                peer (3),
                macTunnel (4)
        }

AlaEServiceL2CustomProtocolType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION
        "The type of the custom L2 protocol entry is defined by this mib object.
         mask-type (1) - specifies a MAC+Mask entry
         mac-type (2) - specifies a MAC alone entry
         ssapdsap-type (3) - specifies a MAC+SSAP/DSAP+PID entry
         ether-type (4) - specifies a MAC+ETHERTYPE entry."
        SYNTAX   INTEGER
        {
                maskType (1),
                macType (2),
                ssapdsapType (3),
                etherType (4),
                ethersubType (5)
        }
        
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alcatelIND1eServiceMIBObjects OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For E-Service Managed Objects."
     	::= { alcatelIND1EServiceMIB 1 }

alcatelIND1EServiceMIBConformance OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For E-Service Conformance Information."
    	::= { alcatelIND1EServiceMIB 2 }

alcatelIND1EServiceMIBGroups OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For E-Service Units Of Conformance."
     	::= { alcatelIND1EServiceMIBConformance 1 }

alcatelIND1EServiceMIBCompliances OBJECT-IDENTITY
        STATUS current
        DESCRIPTION
            "Branch For E-Service Compliance Statements."
    	 ::= { alcatelIND1EServiceMIBConformance 2 }


-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--  The E-Service Group 

     alaEService OBJECT IDENTIFIER ::= { alcatelIND1eServiceMIBObjects 1 }

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaEServiceInfo OBJECT IDENTIFIER ::= { alaEService 1 }


alaEServiceMode  OBJECT-TYPE
        SYNTAX  INTEGER
        {
                legacyMode (1),
                eServiceMode (2)
        }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
        "The current mode configured for Vlan Stacking and Layer 2 tunnel configuration. 
        legacyMode (1) indicates that the commands from AlcatelIND1VLANStacking.mib are
        to be used. eServiceMode (2) indicates the commands from this MIB are to be used."
        DEFVAL { legacyMode }
        ::= { alaEServiceInfo 1 }

alaEServiceStatReset   OBJECT-TYPE
        SYNTAX  INTEGER
	{
		default(0),
		reset(1)
	}
	MAX-ACCESS      read-write
        STATUS  current
        DESCRIPTION
	"Defines the global clear statistics control for ethernet-service 
	counters.
	default(0) - default value for this object,
	reset(1)   - indicates that all ethernet-service counters should be 
		     cleared."
	DEFVAL  { default }
  	::= { alaEServiceInfo 2 }	

alaEServiceL2MacTunnel OBJECT-TYPE
        SYNTAX  INTEGER
	{
		enable(1),
		disable(2)
	}
	MAX-ACCESS      read-write
        STATUS  current
        DESCRIPTION
	"Controls the layer 2 Mac tunnel globaly.
	enable(1)  - MAC tunneling is enabled globally.
	disable(2) - MAC tunneling is disabled globally."
	DEFVAL  { enable }
  	::= { alaEServiceInfo 3 }

alaEServiceUntaggedMode OBJECT-TYPE
                SYNTAX  INTEGER
     	{
      		enable(1),
 		disable(2)
      	}
      	MAX-ACCESS      read-write
         STATUS  current
           DESCRIPTION
   	    "Controls the status of cvlan on untagged frames feature globally. 
       	    enable(1)  - Untagged Mode is enabled globally.
       	    disable(2) - Untagged Mode is disabled globally."
        	DEFVAL  { disable }
          	::= { alaEServiceInfo 4 }
	
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--   The E-Service SAP Profile Table

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alaEServiceSapProfileTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF  AlaEServiceSapProfileEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A table that contains service profiles containing performance and control attributes. 
        An entry in this table is created when a new service profile is defined."
        ::= { alaEService 2 }

alaEServiceSapProfileEntry  OBJECT-TYPE
        SYNTAX  AlaEServiceSapProfileEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A E-Service Service Profile entry."
        INDEX   { IMPLIED alaEServiceSapProfileID }
        ::= { alaEServiceSapProfileTable 1 }

AlaEServiceSapProfileEntry ::= SEQUENCE 
        {
                alaEServiceSapProfileID		                DisplayString, 
		alaEServiceSapProfileCVLANTreatment		INTEGER,
		alaEServiceSapProfileReplacementCVLAN		INTEGER,
		alaEServiceSapProfilePriorityMapMode	        INTEGER, 
		alaEServiceSapProfileFixedPriority	        INTEGER,
		alaEServiceSapProfileIngressBW    		Integer32,
                alaEServiceSapProfileBandwidthShare             INTEGER,
		alaEServiceSapProfileRowStatus                  RowStatus,
		alaEServiceSapProfileEgressBW                   Integer32,
		alaEServiceSapProfileCIR			Integer32,
		alaEServiceSapProfileCBS			Integer32,
		alaEServiceSapProfilePIR		 	Integer32,
		alaEServiceSapProfilePBS			Integer32,
		alaEServiceSapProfileDepth		        Integer32
	}

alaEServiceSapProfileID OBJECT-TYPE
        SYNTAX  DisplayString (SIZE (1..31))
        MAX-ACCESS not-accessible 
        STATUS  current
        DESCRIPTION
        "A label given to uniquely identify this profile. Must be at least one character long."
        ::= { alaEServiceSapProfileEntry 1 }

alaEServiceSapProfileCVLANTreatment  OBJECT-TYPE
        SYNTAX  INTEGER
        {
                stackSVLAN (1),
                translate (2),
                changeCVLAN (3)
        }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "The type of VLAN stacking operation to be performed on a customer frame entering 
        this service.  Stack Svlan (1) indicates that the SVLAN is to be pre-pended on the 
        frame before any existing 802.1Q tag.  Translate (2) means to replace the existing 
        802.1Q tag with the SVLAN.  Change CVLAN (3) indicates that the customer tag is to 
        remain on the frame but its value is to be changed to the supplied value."
        DEFVAL { stackSVLAN }
        ::= { alaEServiceSapProfileEntry 2 }

alaEServiceSapProfileReplacementCVLAN  OBJECT-TYPE
        SYNTAX  INTEGER (1..4094)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "The CVLAN ID to use when using the Change CVLAN treatment mode."
        ::= { alaEServiceSapProfileEntry 3 }

alaEServiceSapProfilePriorityMapMode  OBJECT-TYPE
        SYNTAX  INTEGER
        {
                notAssigned(0),
                mapInnerPtoOuterP (1),
                mapInnerDscpToOuterP(2),
                fixedP (3)
        }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the source of the value for the priority field of the SVLAN 
        802.1Q tag when pre-pended to the customer data frame. If set to notAssigned(0), SAP
        priority limit parameter will not be effective, QoS priority settings needs to be
        configured. MapInnerPtoOuterP (1) uses the priority field of the incoming frame when
        tagged to fill in the priority field of the SVLAN tag. mapInnerDscpToOuterP (2) uses
        the frames priority bits in its IP DSCP field to fill in the priority field of the
        SVLAN tag. FixedP (3) uses the supplied FixedPriorityValue to fill in the SVLAN tag
        priority bits."
        DEFVAL { fixedP }
        ::= { alaEServiceSapProfileEntry 4 }

alaEServiceSapProfileFixedPriority  OBJECT-TYPE
        SYNTAX  INTEGER (0..7)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the value of the priority field of the 802.1Q SVLAN tag 
        pre-pended to customer data frames when the fixed priority mapping mode is selected." 
        DEFVAL { 0 }
        ::= { alaEServiceSapProfileEntry 5 }

alaEServiceSapProfileIngressBW  OBJECT-TYPE
        SYNTAX  Integer32
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes this limit of ingress bandwidth for the traffic to which 
        this profile is applied. If 0, no bandwidth limit is applied.  This number represents 
        traffic in units of 1,000,000 bits per second. Note that all CVLAN that belong to this
        SAP will share this aggregated limit."
        ::= { alaEServiceSapProfileEntry 6 }

alaEServiceSapProfileBandwidthShare  OBJECT-TYPE
        SYNTAX  INTEGER
        {
	        notApplicable(0),	
                shared (1),
                notShared(2),
                notAssigned(3)
	}
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the use of the bandwidth limit in how it is applied across 
        multiple ports of the SAP. If set to notApplicable(0), the SAP is not used. If set 
	to Shared (1), all the ports that are part of the SAP will use aggregated
        bandwidth, sharing some part of the bandwidth limit. If set to notShared (2),
        each port will use its own bandwidth meter for this SAP. This value is not used
        if ingressBandwidth is 0.If set to notAssigned(3), SAP bandwidth limit parameter
        will not be effective, QoS bandwith settings needs to be configured."
        DEFVAL { shared }
        ::= { alaEServiceSapProfileEntry 7 }

alaEServiceSapProfileRowStatus OBJECT-TYPE
        SYNTAX  RowStatus
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "The status of this table entry."
        ::= { alaEServiceSapProfileEntry 8 }	

alaEServiceSapProfileEgressBW  OBJECT-TYPE
        SYNTAX  Integer32
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes this limit of egress bandwidth for each UNI
        of the SAP to which this profile is applied. If 0, no bandwidth limit
        is applied.  This number represents traffic in units of Megabits per
        second. Note that all CVLAN that belong to this SAP will share this
        aggregated limit."
        DEFVAL { 0 }
        ::= { alaEServiceSapProfileEntry 9 }

alaEServiceSapProfileCIR OBJECT-TYPE
	SYNTAX      Integer32 
	MAX-ACCESS  read-create
	STATUS      current
	DESCRIPTION "Committed Information Rate - bandwidth values in bits per second."
	DEFVAL      { 0 }
	::= { alaEServiceSapProfileEntry 10 }

alaEServiceSapProfileCBS  OBJECT-TYPE
        SYNTAX      Integer32 
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Committed Burst Size - bucket size in byte."
	DEFVAL      { 0 }
	::= { alaEServiceSapProfileEntry 11 }

alaEServiceSapProfilePIR  OBJECT-TYPE
        SYNTAX      Integer32 
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Peak Information Rate - bandwidth values in bits per second."
	DEFVAL      { 0 }
        ::= { alaEServiceSapProfileEntry 12 }

alaEServiceSapProfilePBS  OBJECT-TYPE
        SYNTAX      Integer32 
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION "Peak Burst Size - bucket size in byte."
	DEFVAL      { 0 }
	::= { alaEServiceSapProfileEntry 13 } 

alaEServiceSapProfileDepth  OBJECT-TYPE
        SYNTAX  Integer32
        MAX-ACCESS read-create
        STATUS  current
        DESCRIPTION
        "This object describes the depth limit."
        DEFVAL      { 0 }
        ::= { alaEServiceSapProfileEntry 14 }	
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--   The E-Service UNI Profile Table

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alaEServiceUNIProfileTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF  AlaEServiceUNIProfileEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A table that contains service profiles containing performance and control attributes. 
        An entry in this table is created when a new service profile is defined."
        ::= { alaEService 3 }

alaEServiceUNIProfileEntry  OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A E-Service Service Profile entry."
        INDEX   { IMPLIED alaEServiceUNIProfileID }
        ::= { alaEServiceUNIProfileTable 1 }

AlaEServiceUNIProfileEntry ::= SEQUENCE 
        {
                alaEServiceUNIProfileID		                DisplayString, 
		alaEServiceUNIProfileStpBpduTreatment		AlaEServiceUNIProfileProtocolTreatment,
		alaEServiceUNIProfile8021xTreatment		AlaEServiceUNIProfileProtocolTreatment,
		alaEServiceUNIProfile8021ABTreatment		AlaEServiceUNIProfileProtocolTreatment,
		alaEServiceUNIProfile8023adTreatment		AlaEServiceUNIProfileProtocolTreatment,
		alaEServiceUNIProfileGvrpTreatment		AlaEServiceUNIProfileProtocolTreatment,
		alaEServiceUNIProfileAmapTreatment		AlaEServiceUNIProfileProtocolTreatment,
		alaEServiceUNIProfileRowStatus                  RowStatus,
		alaEServiceUNIProfileMvrpTreatment              AlaEServiceUNIProfileProtocolTreatment,
		alaEServiceUNIProfileTunnelMac                  MacAddress,
                alaEServiceUNIProfileLacpMarkerTreatment        AlaEServiceUNIProfileProtocolTreatment,
                alaEServiceUNIProfileOamTreatment               AlaEServiceUNIProfileProtocolTreatment,
                alaEServiceUNIProfileCiscoPagpTreatment         AlaEServiceUNIProfileProtocolTreatment,
                alaEServiceUNIProfileCiscoUdldTreatment         AlaEServiceUNIProfileProtocolTreatment,
                alaEServiceUNIProfileCiscoCdpTreatment          AlaEServiceUNIProfileProtocolTreatment,
                alaEServiceUNIProfileCiscoVtpTreatment          AlaEServiceUNIProfileProtocolTreatment,
                alaEServiceUNIProfileCiscoDtpTreatment          AlaEServiceUNIProfileProtocolTreatment,
                alaEServiceUNIProfileCiscoPvstTreatment         AlaEServiceUNIProfileProtocolTreatment,
                alaEServiceUNIProfileCiscoVlanTreatment         AlaEServiceUNIProfileProtocolTreatment,
                alaEServiceUNIProfileCiscoUplinkTreatment       AlaEServiceUNIProfileProtocolTreatment,
                alaEServiceUNIProfileIeeeMacTreatment           INTEGER
        }

alaEServiceUNIProfileID OBJECT-TYPE
        SYNTAX  DisplayString (SIZE (1..31))
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A label given to uniquely identify this profile. Must be at least one character long."
        ::= { alaEServiceUNIProfileEntry 1 }

alaEServiceUNIProfileStpBpduTreatment  OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the spanning tree 
        protocol BPDU received on the UNI. Tunnel (1) enables the PDU to be tunneled across 
        the provider network.  Discard (2) causes the PDU of the protocol to be discarded 
        and not enter the provider network. Peer (3) means that on this port the bridge 
        is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling."
        DEFVAL { tunnel }
        ::= { alaEServiceUNIProfileEntry 2 }

alaEServiceUNIProfile8021xTreatment  OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the IEEE 802.1x PDU 
        frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across 
        the provider network.  Discard (2) causes the PDU of the protocol to be discarded 
        and not enter the provider network. Peer (3) means that on this port the bridge 
        is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.
        From 6.6.1.680.R01 Post GA, this object became read-create."
        DEFVAL { drop }
        ::= { alaEServiceUNIProfileEntry 3 }

alaEServiceUNIProfile8021ABTreatment  OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the IEEE 802.1AB PDU 
        frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across 
        the provider network.  Discard (2) causes the PDU of the protocol to be discarded 
        and not enter the provider network. Peer (3) means that on this port the bridge 
        is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling. 
        From 6.6.1.680.R01 Post GA, this object became read-create."
        DEFVAL { drop }
        ::= { alaEServiceUNIProfileEntry 4 }

alaEServiceUNIProfile8023adTreatment  OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the IEEE 802.1ad PDU 
        frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across 
        the provider network.  Discard (2) causes the PDU of the protocol to be discarded 
        and not enter the provider network. Peer (3) means that on this port the bridge 
        is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.
        From 6.6.1.680.R01 Post GA, this object became read-create."
        DEFVAL { peer }
        ::= { alaEServiceUNIProfileEntry 5 }

alaEServiceUNIProfileGvrpTreatment  OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the GVRP PDU 
        frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across 
        the provider network.  Discard (2) causes the PDU of the protocol to be discarded 
        and not enter the provider network. Peer (3) means that on this port the bridge 
        is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling."
        DEFVAL { tunnel }
        ::= { alaEServiceUNIProfileEntry 6 }

alaEServiceUNIProfileAmapTreatment  OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the Alcatel
        propietary AMAP PDU frames received on the UNI. Tunnel (1) enables the PDU to 
        be tunneled across the provider network.  Discard (2) causes the PDU of the 
        protocol to be discarded and not enter the provider network. Peer (3) means 
        that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling. Currenly mac-tunnel is not supported.
        From 6.6.1.680.R01 Post GA, this object became read-create."
        DEFVAL { drop }
        ::= { alaEServiceUNIProfileEntry 7 }

alaEServiceUNIProfileRowStatus OBJECT-TYPE
        SYNTAX  RowStatus
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "The status of this table entry."
        ::= { alaEServiceUNIProfileEntry 8 }	

alaEServiceUNIProfileMvrpTreatment  OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the MVRP PDU
        frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
        the provider network.  Discard (2) causes the PDU of the protocol to be discarded
        and not enter the provider network. Peer (3) means that on this port the bridge
        is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling."
        DEFVAL { tunnel }
        ::= { alaEServiceUNIProfileEntry 9 }

alaEServiceUNIProfileTunnelMac OBJECT-TYPE
        SYNTAX MacAddress
        MAX-ACCESS read-create
        STATUS  current
        DESCRIPTION
        "This object specifies the tunnel mac used to tunnel L2 protocol to NNI ports"
        ::= { alaEServiceUNIProfileEntry 10 }

alaEServiceUNIProfileLacpMarkerTreatment  OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the LACP MARKER PDU
        frames received on the UNI. Tunnel (1) enables the PDU to
        be tunneled across the provider network.  Discard (2) causes the PDU of the
        protocol to be discarded and not enter the provider network. Peer (3) means
        that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling." 
        DEFVAL { peer }
        ::= { alaEServiceUNIProfileEntry 11 }

alaEServiceUNIProfileOamTreatment  OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the OAM PDU
        frames received on the UNI. Tunnel (1) enables the PDU to
        be tunneled across the provider network.  Discard (2) causes the PDU of the
        protocol to be discarded and not enter the provider network. Peer (3) means
        that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling." 
        DEFVAL { peer }
        ::= { alaEServiceUNIProfileEntry 12 }

alaEServiceUNIProfileCiscoPagpTreatment OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the PAGP PDU
        frames received on the UNI. Tunnel (1) enables the PDU to
        be tunneled across the provider network.  Discard (2) causes the PDU of the
        protocol to be discarded and not enter the provider network. Peer (3) means
        that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.
        Currently peer is not supported"
        DEFVAL { drop }
        ::= { alaEServiceUNIProfileEntry 13 }

alaEServiceUNIProfileCiscoUdldTreatment OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the UDLD PDU
        frames received on the UNI. Tunnel (1) enables the PDU to
        be tunneled across the provider network.  Discard (2) causes the PDU of the
        protocol to be discarded and not enter the provider network. Peer (3) means
        that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling." 
        DEFVAL { drop }
        ::= { alaEServiceUNIProfileEntry 14 }

alaEServiceUNIProfileCiscoCdpTreatment OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the CDC PDU
        frames received on the UNI. Tunnel (1) enables the PDU to
        be tunneled across the provider network.  Discard (2) causes the PDU of the
        protocol to be discarded and not enter the provider network. Peer (3) means
        that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.
        Currently peer is not supported"
        DEFVAL { drop }
        ::= { alaEServiceUNIProfileEntry 15 }

alaEServiceUNIProfileCiscoVtpTreatment OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the VTP PDU
        frames received on the UNI. Tunnel (1) enables the PDU to
        be tunneled across the provider network.  Discard (2) causes the PDU of the
        protocol to be discarded and not enter the provider network. Peer (3) means
        that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling. 
        Currently peer is not supported"
        DEFVAL { drop }
        ::= { alaEServiceUNIProfileEntry 16 }

alaEServiceUNIProfileCiscoDtpTreatment OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the DTP PDU
        frames received on the UNI. Tunnel (1) enables the PDU to
        be tunneled across the provider network.  Discard (2) causes the PDU of the
        protocol to be discarded and not enter the provider network. Peer (3) means
        that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling. 
        Currently peer not supported"
        DEFVAL { drop }
        ::= { alaEServiceUNIProfileEntry 17 }


alaEServiceUNIProfileCiscoPvstTreatment OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the PVST PDU
        frames received on the UNI. Tunnel (1) enables the PDU to
        be tunneled across the provider network.  Discard (2) causes the PDU of the
        protocol to be discarded and not enter the provider network. Peer (3) means
        that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.
	Currently peer not supported"
        DEFVAL { drop }
        ::= { alaEServiceUNIProfileEntry 18 }

alaEServiceUNIProfileCiscoVlanTreatment OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the VLAN PDU
        frames received on the UNI. Tunnel (1) enables the PDU to
        be tunneled across the provider network.  Discard (2) causes the PDU of the
        protocol to be discarded and not enter the provider network. Peer (3) means
        that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.
	Currently peer not supported"
        DEFVAL { drop }
        ::= { alaEServiceUNIProfileEntry 19 }

alaEServiceUNIProfileCiscoUplinkTreatment OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the UPLINK PDU
        frames received on the UNI. Tunnel (1) enables the PDU to
        be tunneled across the provider network.  Discard (2) causes the PDU of the
        protocol to be discarded and not enter the provider network. Peer (3) means
        that on this port the bridge is to participate in the protocol. Mac-Tunnel(4) enables mac-tunnelling.
	Currently peer not supported." 
        DEFVAL { drop }
        ::= { alaEServiceUNIProfileEntry 20 }

alaEServiceUNIProfileIeeeMacTreatment OBJECT-TYPE
        SYNTAX  INTEGER {
                  unknown(0),
                  ieeeFwdAll(1),
                  ieeeDropAll(2)
                }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the IEEEE Mac treatment
        unknown (0) the type is not defined.
        ieee-fwd-all(1) - Forwards all IEEE MAC's
        ieee-drop-all(2) - Discards all IEEE MAC's."
        DEFVAL { ieeeFwdAll }
        ::= { alaEServiceUNIProfileEntry 21 }

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--  The E-Service Service Table 

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alaEServiceTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF  AlaEServiceEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A table that contains the services and their assigned SVLAN for the
        E-Service feature."
        ::= { alaEService 4 }
        
alaEServiceEntry  OBJECT-TYPE
        SYNTAX  AlaEServiceEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "The svlan/ipmvlan-port association."
        INDEX   { IMPLIED alaEServiceID }
        ::= { alaEServiceTable 1 }
        
AlaEServiceEntry ::=   SEQUENCE 
        {
                alaEServiceID       		DisplayString,
		alaEServiceSVLAN    		INTEGER,
                alaEServiceVlanType             INTEGER,
		alaEServiceRowStatus		RowStatus,
		alaEServiceStatGreenCount       Counter64,
		alaEServiceStatYellowCount      Counter64,
		alaEServiceStatRedCount	 	Counter64,
		alaEServiceStatTotalCount       Counter64
        }

alaEServiceID  OBJECT-TYPE
        SYNTAX  DisplayString (SIZE(1..32))
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A label given to uniquely identify this Service. Must be at least one character long."
        ::= { alaEServiceEntry 1 }

alaEServiceSVLAN OBJECT-TYPE
        SYNTAX  INTEGER (1..4094)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "The SVLAN number of the SVLAN chosen to the be transport for this service."
        ::= { alaEServiceEntry 2 }
        
alaEServiceVlanType OBJECT-TYPE
        SYNTAX  INTEGER {
                  unknown(0),
                  svlan(1),
                  ipmvlan(2)
                }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "The type of the vlan this service is going to attach to. When creating the service,
        the type should match the vlanId specified in the request."
        ::= { alaEServiceEntry 3 }

alaEServiceRowStatus OBJECT-TYPE
        SYNTAX  RowStatus
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "The status of this table entry.  The supported value for set are 
        createAndGo (4) and destroy(6), to add or remove a service. When
        creating or deleting the service, the user needs to provide both
        the svlan and the vlantype objects."
        ::= { alaEServiceEntry 4 }	

alaEServiceStatGreenCount  OBJECT-TYPE
        SYNTAX  Counter64
	MAX-ACCESS  read-only
	STATUS  current
        DESCRIPTION
	"Counter for the number of packets/bytes being Green compliant (i.e. in case of srTCM
	and trTCM, packet is CIR/CBS compliant)."
	::= { alaEServiceEntry 5 }

alaEServiceStatYellowCount  OBJECT-TYPE
        SYNTAX  Counter64
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
	"Counter for the number of packets/bytes being Yellow compliant (i.e. in case of srTCM
	and trTCM, packet is PIR/PBS compliant)."
	::= { alaEServiceEntry 6 }

alaEServiceStatRedCount  OBJECT-TYPE
        SYNTAX  Counter64
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
	"Counter for the number of packets/bytes being Red compliant (i.e. in case of srTCM
        and trTCM, packet is neither CIR/CBS nor PIR/PBS compliant)." 
	::= { alaEServiceEntry 7 } 

alaEServiceStatTotalCount  OBJECT-TYPE
        SYNTAX  Counter64 
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
	"Counter for the total number of packets/bytes (sum of Green, Yellow and Red counters)."
	::= { alaEServiceEntry 8 } 

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--  The E-Service SAP Table 

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaEServiceSapTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF  AlaEServiceSapEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A table that contains the Service Access Points (Sap) listed by ID. 
        This table is used to create, delete, and modify the SAP's profile"
        ::= { alaEService 5 }
        
alaEServiceSapEntry  OBJECT-TYPE
        SYNTAX  AlaEServiceSapEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "The list of SAP."
        INDEX   { alaEServiceSapID}
        ::= { alaEServiceSapTable 1 }
        
AlaEServiceSapEntry ::=   SEQUENCE 
        {
                alaEServiceSapID		Integer32,
                alaEServiceSapServiceID         DisplayString,
                alaEServiceSapProfile           DisplayString,
		alaEServiceSapRowStatus		RowStatus
        }

alaEServiceSapID  OBJECT-TYPE
        SYNTAX Integer32 (1..2147483647)
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A Number given to uniquely identify the SAP."
        ::= { alaEServiceSapEntry 1 }

alaEServiceSapServiceID  OBJECT-TYPE
        SYNTAX  DisplayString (SIZE(1..32))
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "A label given to uniquely identify the Service this SAP is for. Must 
        be at least one character long."
        ::= { alaEServiceSapEntry 2 }

alaEServiceSapProfile  OBJECT-TYPE
        SYNTAX  DisplayString (SIZE(1..32))
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "The string identifying the SAP Profile this sap is to use. If specified, must match an existing 
        SAP Profile."
        ::= { alaEServiceSapEntry 3 }

alaEServiceSapRowStatus OBJECT-TYPE
        SYNTAX  RowStatus
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "The status of this table entry. The supported value for set are 
        createAndGo (4) and destroy(6), to add or remove a sap. When 
        creating the sap, the user needs to provide the service name in
        the same set request."
        ::= { alaEServiceSapEntry 4 }

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--  The E-Service SAP CVLAN Table 

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alaEServiceSapCvlanTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF  AlaEServiceSapCvlanEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A table that contains the Service Access Points (Sap) where the CVLANs are bound 
        to their service."
        ::= { alaEService 6 }
        
alaEServiceSapCvlanEntry  OBJECT-TYPE
        SYNTAX  AlaEServiceSapCvlanEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "The CVLAN to Sap binding."
        INDEX   { alaEServiceSapCvlanSapID, alaEServiceSapCvlanCvlan }
        ::= { alaEServiceSapCvlanTable 1 }
        
AlaEServiceSapCvlanEntry ::=   SEQUENCE 
        {
                alaEServiceSapCvlanSapID   	Integer32,
		alaEServiceSapCvlanCvlan	INTEGER,
		alaEServiceSapCvlanMapType      INTEGER,
		alaEServiceSapCvlanRowStatus		RowStatus
        }

alaEServiceSapCvlanSapID  OBJECT-TYPE
        SYNTAX Integer32 (1..2147483647)
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A Number given to uniquely identify this SAP."
        ::= { alaEServiceSapCvlanEntry 1 }

alaEServiceSapCvlanCvlan  OBJECT-TYPE
        SYNTAX INTEGER (0..4094)
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "This object is the CVLAN ID that this binding is targeted at.  The CVLAN ID 
        may be 0, which indicates an all or untagged only mapping type."
        ::= { alaEServiceSapCvlanEntry 2 }

alaEServiceSapCvlanMapType  OBJECT-TYPE
        SYNTAX  INTEGER
        {
                single (1),
                all(2),
                untaggedOnly (3)
        }
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object is the mapping type that defines what CVLANs are mapped into this service.
        Multiple mappings can be defined for CVLAN to service, however only one all (2) or 
        untaggedOnly (3) mapping entry can be created per UNI.  A mapping type of Single (1) 
        denotes a specific CVLAN value to bind to the service. A mapping type of All (2) 
        denotes that all customer frames that do not map to any other SAP, 
        will be mapped into this service.  A mapping type of Untagged (3) denotes that only 
        the untagged frames will be mapped into this service."
        DEFVAL { single }
        ::= { alaEServiceSapCvlanEntry 3 }

alaEServiceSapCvlanRowStatus OBJECT-TYPE
        SYNTAX  RowStatus
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "The status of this table entry.  The supported value for set are 
        createAndGo (4) and destroy(6), to add or remove a SAP."
        ::= { alaEServiceSapCvlanEntry 4 }


-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--  The E-Service Port Table 

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alaEServicePortTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF  AlaEServicePortEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A table that contains the ports used by the EService feature.  Both UNI and NNI
        are listed here."
        ::= { alaEService 7 }
        
alaEServicePortEntry  OBJECT-TYPE
        SYNTAX  AlaEServicePortEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "The list of ports being used by EService."
        INDEX   { alaEServicePortID}
        ::= { alaEServicePortTable 1 }
        
AlaEServicePortEntry ::=   SEQUENCE 
        {
                alaEServicePortID		InterfaceIndex,
                alaEServicePortType		INTEGER,
		alaEServicePortVendorTpid	Integer32,
		alaEServicePortLegacyStpBpdu	INTEGER,
		alaEServicePortLegacyGvrpPdu	INTEGER,
		alaEServicePortUniProfile	DisplayString,
		alaEServicePortTransBridging    INTEGER,
		alaEServicePortLegacyMvrpPdu        INTEGER
        }

alaEServicePortID  OBJECT-TYPE
        SYNTAX InterfaceIndex 
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "The IfIndex of this UNI or NNI Port."
        ::= { alaEServicePortEntry 1 }

alaEServicePortType  OBJECT-TYPE
        SYNTAX  INTEGER
        {
                uni (1),
                nni (3)
        }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
        "The type of port for Vlan Stacking operation. uni (1) represents a customer facing
        port on which traffic may enter the E-Service.  nni (2) respresents a provider network 
        port over which the E-Service may be connected."
        DEFVAL { uni }
        ::= { alaEServicePortEntry 2 }

alaEServicePortVendorTpid  OBJECT-TYPE
        SYNTAX Integer32 
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
        "he TPID for this port if type is NNI. It is used for the incoming data
        traffic parsing and it is substituted to the 802.1Q standard Tpid for 
        the outgoing data traffic. This is used for compatibility with other vendor 
        equipment. The default value is the standard value 0x8100."
        DEFVAL { 33024 }
        ::= { alaEServicePortEntry 3 }

alaEServicePortLegacyStpBpdu  OBJECT-TYPE
        SYNTAX  INTEGER
        {
		notApplicable (0),
                enable (1),
                disable (2)
        }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
        "The legacy STP BPDU treatment for this port if NNI. It defines the type of processing 
         applied to STP legacy BPDUs on network ports. Legacy BPDU refer to conventional/customer
         BPDUs with MAC address 01:80:c2:00:00:00 and its processing on network ports can be 
         enabled/disabled by this object.By default the value is disabled i.e 
         provider MAC BPDU with MAC address 01:80:c2:00:00:08 would be processed at network ports."
        DEFVAL { disable }
        ::= { alaEServicePortEntry 4 }

alaEServicePortLegacyGvrpPdu  OBJECT-TYPE
        SYNTAX  INTEGER
        {
		notApplicable (0),
                enable (1),
                disable (2)
        }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
        "The legacy GVRP PDU treatment for this port if NNI. It defines the type of processing 
         applied to GVRP PDUs on network ports. "
        DEFVAL { disable }
        ::= { alaEServicePortEntry 5 }
 
alaEServicePortUniProfile OBJECT-TYPE
        SYNTAX  DisplayString (SIZE (1..31))
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
        "The label of an existing UNI profile that which contains various properties to be 
        applied to this port if UNI."
        ::= { alaEServicePortEntry 6 }

alaEServicePortTransBridging  OBJECT-TYPE
        SYNTAX  INTEGER
	{
		enable (1),
		disable (2)
	}
	MAX-ACCESS  read-write
	STATUS  current
	DESCRIPTION
	"The Transparent Bridging status for the nni Port."
	DEFVAL { disable }
	::= { alaEServicePortEntry 7 }

alaEServicePortLegacyMvrpPdu  OBJECT-TYPE	
       SYNTAX  INTEGER	
       {	
               notApplicable (0),	
               enable (1),	
               disable (2)	
       }	
       MAX-ACCESS  read-write	
       STATUS  current	
       DESCRIPTION	
       "The legacy MVRP PDU treatment for this port if NNI. It defines the type of processing 	
        applied to MVRP PDUs on network ports. "	
       DEFVAL { disable }	
       ::= { alaEServicePortEntry 8 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--  The E-Service SAP-UNI Binding Table 

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaEServiceSapUniTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF  AlaEServiceSapUniEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A table that contains the UNI that are bound to each SAP for classifying 
        traffic into each EService. Not that writing to this table may create
        a new UNI."
        ::= { alaEService 8 }
        
alaEServiceSapUniEntry  OBJECT-TYPE
        SYNTAX  AlaEServiceSapUniEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "The list of SAP-UNI bindings being used by EService."
          INDEX   { alaEServiceSapUniSap, alaEServiceSapUniUni, alaEServiceSapUniCvlan }
        ::= { alaEServiceSapUniTable 1 }
        
AlaEServiceSapUniEntry ::=   SEQUENCE 
        {
                alaEServiceSapUniSap		Integer32,
                alaEServiceSapUniUni	        InterfaceIndex,
      		  alaEServiceSapUniRowStatus	RowStatus,
		  alaEServiceSapUniCvlan      InterfaceIndex
        }


alaEServiceSapUniSap  OBJECT-TYPE
        SYNTAX Integer32 (1..2147483647)
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "The SAP ID that is configured onto this port."
        ::= { alaEServiceSapUniEntry 1 }

alaEServiceSapUniUni  OBJECT-TYPE
        SYNTAX InterfaceIndex 
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "The IfIndex of this UNI Port."
        ::= { alaEServiceSapUniEntry 2 }

alaEServiceSapUniRowStatus OBJECT-TYPE
        SYNTAX  RowStatus
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "The status of this table entry. The supported value for set are 
        createAndGo (4) and destroy(6), to add or remove a binding"
        ::= { alaEServiceSapUniEntry 3 }

alaEServiceSapUniCvlan  OBJECT-TYPE
            SYNTAX InterfaceIndex
            MAX-ACCESS  not-accessible
             STATUS  current
             DESCRIPTION
                "Cvlan to be inserted for untagged frames incoming in this UNI Port if Cvlan insertion feature enabled else 0"
                ::= { alaEServiceSapUniEntry 4 }

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--  The E-Service NNI-SVLAN Binding Table 

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaEServiceNniSvlanTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF  AlaEServiceNniSvlanEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A table that contains the SVLANs bound to each NNI for use by the 
        EService feature."
        ::= { alaEService 9 }
        
alaEServiceNniSvlanEntry  OBJECT-TYPE
        SYNTAX  AlaEServiceNniSvlanEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "The list of NNI-SVLAN bindings being used by EService."
        INDEX   { alaEServiceNniSvlanNni, alaEServiceNniSvlanSvlan}
        ::= { alaEServiceNniSvlanTable 1 }
        
AlaEServiceNniSvlanEntry ::=   SEQUENCE 
        {
                alaEServiceNniSvlanNni		InterfaceIndex,
                alaEServiceNniSvlanSvlan	INTEGER,
		alaEServiceNniSvlanRowStatus	RowStatus,
                alaEServiceNniSvlanVpaType	INTEGER
        }

alaEServiceNniSvlanNni  OBJECT-TYPE
        SYNTAX InterfaceIndex 
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "The IfIndex of this NNI Port."
        ::= { alaEServiceNniSvlanEntry 1 }

alaEServiceNniSvlanSvlan  OBJECT-TYPE
        SYNTAX INTEGER (2..4094) 
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "The SVLAN bound to this port. SVLAN cannot be 1."
        ::= { alaEServiceNniSvlanEntry 2 }

alaEServiceNniSvlanRowStatus OBJECT-TYPE
        SYNTAX  RowStatus
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "The status of this table entry. The supported value for set are 
        createAndGo (4) and destroy(6), to add or remove a binding"
        ::= { alaEServiceNniSvlanEntry 3 }

-- alaEServiceNniSvlanVpaType is added in 6.3.4.R01
 
alaEServiceNniSvlanVpaType  OBJECT-TYPE
        SYNTAX INTEGER {
                         stp (1),
                         erp (2)  
                       } 
        MAX-ACCESS  read-create 
        STATUS  current
        DESCRIPTION
        "The object is used to specify whether the VPA state is to 
        be controlled by an ERP or a STP. By default VPA state is 
        controlled by STP."
        DEFVAL  { stp }
        ::= { alaEServiceNniSvlanEntry 4 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--  The E-Service srTCM and trTCM Counter Statistics Table 

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alaEServiceSapCvlanPortStatTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF  AlaEServiceSapCvlanPortStatEntry
	MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
	"A statistics table that contains the counters per SAP." 
	::= { alaEService 10 }

alaEServiceSapCvlanPortStatEntry OBJECT-TYPE
        SYNTAX  AlaEServiceSapCvlanPortStatEntry
	MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
	"A E-Service Statistics Entry."
	INDEX { alaEServiceSapCvlanPortStatSapID, 
		alaEServiceSapCvlanPortStatCvlanID,
		alaEServiceSapCvlanPortStatPortID }
	::= { alaEServiceSapCvlanPortStatTable 1 }

AlaEServiceSapCvlanPortStatEntry ::=   SEQUENCE
        {
		alaEServiceSapCvlanPortStatSapID        Integer32,
		alaEServiceSapCvlanPortStatCvlanID      INTEGER,
		alaEServiceSapCvlanPortStatPortID       InterfaceIndex,
		alaEServiceSapCvlanPortStatGreenCount   Counter64,
		alaEServiceSapCvlanPortStatYellowCount  Counter64,
		alaEServiceSapCvlanPortStatRedCount     Counter64,
		alaEServiceSapCvlanPortStatTotalCount   Counter64
	}

alaEServiceSapCvlanPortStatSapID OBJECT-TYPE
        SYNTAX Integer32 (1..2147483647)
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A Number given to uniquely identify the SAP."
	::= { alaEServiceSapCvlanPortStatEntry 1 }

alaEServiceSapCvlanPortStatCvlanID OBJECT-TYPE
        SYNTAX INTEGER (0..4094)
	MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
	"This object is the CVLAN ID that this binding is targeted at.  The CVLAN ID
        may be 0, which indicates an all or untagged only mapping type."
	::= { alaEServiceSapCvlanPortStatEntry 2 }

alaEServiceSapCvlanPortStatPortID OBJECT-TYPE
	SYNTAX InterfaceIndex
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "The IfIndex of this UNI Port."
	::= { alaEServiceSapCvlanPortStatEntry 3 }

alaEServiceSapCvlanPortStatGreenCount OBJECT-TYPE
	SYNTAX  Counter64
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
        "Counter for the number of packets/bytes being Green compliant (i.e. in case of srTCM
        and trTCM, packet is CIR/CBS compliant) per UNI port, per CVLAN. This object is applicable 
	only when ingress bandwidth is not shared across SAP ports and CVLANs."
	::= { alaEServiceSapCvlanPortStatEntry 4 }

alaEServiceSapCvlanPortStatYellowCount  OBJECT-TYPE
        SYNTAX  Counter64
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
        "Counter for the number of packets/bytes being Yellow compliant (i.e. in case of srTCM
        and trTCM, packet is PIR/PBS compliant) per UNI port, per CVLAN. This object is applicable 
	only when ingress bandwidth is not shared across SAP ports and CVLANs."
	::= { alaEServiceSapCvlanPortStatEntry 5 }

alaEServiceSapCvlanPortStatRedCount  OBJECT-TYPE
        SYNTAX  Counter64
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
        "Counter for the number of packets/bytes being Red compliant (i.e. in case of srTCM
        and trTCM, packet is neither CIR/CBS nor PIR/PBS compliant) per UNI port, per CVLAN. 
	This object is applicable only when ingress bandwidth is not shared across SAP 
	ports and CVLANs."
	::= { alaEServiceSapCvlanPortStatEntry 6 }

alaEServiceSapCvlanPortStatTotalCount  OBJECT-TYPE
        SYNTAX  Counter64
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
        "Counter for the total number of packets/bytes (sum of Green, Yellow and Red counters) per
        UNI port, per CVLAN. This object is applicable only when ingress bandwidth is not shared across 
	SAP ports and CVLANs."
 	::= { alaEServiceSapCvlanPortStatEntry 7 }
	
-- Added in 6.6.3.R01 *** Begin

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

-- The E-Service UNI Profile L2 Custom protocol association entries Table

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alaEServiceUNIProfileL2CustomProtocolTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF AlaEServiceUNIProfileL2CustomProtocolEntry
        MAX-ACCESS  not-accessible
        STATUS current
        DESCRIPTION
        "A table that contains l2 custom protocol entries with name and action associated
         to a uni profile. An entry in this table is created when an l2 custom protocol
         entry is associated to uni profile."
        ::= {alaEService 11}

alaEServiceUNIProfileL2CustomProtocolEntry  OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileL2CustomProtocolEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
        "An E-Service Service Profile entry associated with l2 custom protocol entry."
        INDEX {alaEServiceL2CustomProtocolUNIProfileID, alaEServiceUNIProfileL2CustomProtocolID}
        ::= {alaEServiceUNIProfileL2CustomProtocolTable 1}

AlaEServiceUNIProfileL2CustomProtocolEntry ::= SEQUENCE 
        {
	   alaEServiceL2CustomProtocolUNIProfileID	  SnmpAdminString, 
	   alaEServiceUNIProfileL2CustomProtocolID	  SnmpAdminString,
	   alaEServiceUNIProfileL2CustomProtocolTreatment AlaEServiceUNIProfileProtocolTreatment,
	   alaEServiceUNIProfileL2CustomProtocolRowStatus RowStatus
        }

alaEServiceL2CustomProtocolUNIProfileID OBJECT-TYPE
        SYNTAX  SnmpAdminString (SIZE (1..31))
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
        "A label given to uniquely identify this profile. Must be at least one character long."
        ::= {alaEServiceUNIProfileL2CustomProtocolEntry  1}

alaEServiceUNIProfileL2CustomProtocolID OBJECT-TYPE
        SYNTAX  SnmpAdminString (SIZE (1..32))
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "Name of the L2 Custom protocol entry associated to UNI profile. Must be at least
        one character long."
        ::= { alaEServiceUNIProfileL2CustomProtocolEntry  2 }

alaEServiceUNIProfileL2CustomProtocolTreatment  OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileProtocolTreatment
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the destination Mac address
        matching with the L2 Custom protocol entry mac address on the UNI. Tunnel (1) enables the
        PDU to be tunneled across the provider network.  Discard (2) causes the PDU of the protocol
        to be discarded and not enter the provider network. Peer (3) means that on this port the
        bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunneling."
        DEFVAL {tunnel}
        ::= { alaEServiceUNIProfileL2CustomProtocolEntry  3 }

alaEServiceUNIProfileL2CustomProtocolRowStatus OBJECT-TYPE
        SYNTAX  RowStatus
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "The status of this table entry."
        ::= { alaEServiceUNIProfileL2CustomProtocolEntry  4 }

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

-- The E-Service L2 Custom protocol entries Table

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alaEServiceL2CustomProtocolTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF  AlaEServiceL2CustomProtocolEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "A table that contains l2 custom protocol entries with name, Mac address, mask,
        ether type and ether sub type."
        ::= { alaEService 12 }

alaEServiceL2CustomProtocolEntry  OBJECT-TYPE
        SYNTAX  AlaEServiceL2CustomProtocolEntry
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "An E-Service Service with l2 custom protocol entry."
        INDEX {alaEServiceL2CustomProtocolID }
        ::= { alaEServiceL2CustomProtocolTable 1 }

AlaEServiceL2CustomProtocolEntry ::= SEQUENCE 
        {
	    alaEServiceL2CustomProtocolID		SnmpAdminString,
	    alaEServiceL2CustomProtocolEntryType	AlaEServiceL2CustomProtocolType,
	    alaEServiceL2CustomProtocolMac		MacAddress,
	    alaEServiceL2CustomProtocolMask		MacAddress,
	    alaEServiceL2CustomProtocolEtherType	INTEGER,
	    alaEServiceL2CustomProtocolEtherSubType	INTEGER,
	    alaEServiceL2CustomProtocolSsap		INTEGER,
	    alaEServiceL2CustomProtocolDsap		INTEGER,
	    alaEServiceL2CustomProtocolPid		INTEGER,
	    alaEServiceL2CustomProtocolRowStatus	RowStatus
        }

alaEServiceL2CustomProtocolID OBJECT-TYPE
        SYNTAX  SnmpAdminString (SIZE (1..32))
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        "Name of the L2 Custom protocol entry which is an identifier to this table.
        Must be at least one character long."
        ::= { alaEServiceL2CustomProtocolEntry  1 }

alaEServiceL2CustomProtocolEntryType  OBJECT-TYPE
        SYNTAX AlaEServiceL2CustomProtocolType
        MAX-ACCESS read-create
        STATUS  current
        DESCRIPTION
        "This object specifies the custom L2 protocol entry type"
        DEFVAL {macType}
        ::= { alaEServiceL2CustomProtocolEntry  2 }

alaEServiceL2CustomProtocolMac        OBJECT-TYPE
        SYNTAX MacAddress
        MAX-ACCESS read-create
        STATUS  current
        DESCRIPTION
        "This object specifies the destination mac address that needs L2 protocol handling"
        ::= { alaEServiceL2CustomProtocolEntry  3 }

alaEServiceL2CustomProtocolMask       OBJECT-TYPE
        SYNTAX MacAddress
        MAX-ACCESS read-create
        STATUS  current
        DESCRIPTION
        "This object specifies the range of destination mac address that that needs
        L2 protocol handling"
        ::= { alaEServiceL2CustomProtocolEntry  4 }

 alaEServiceL2CustomProtocolEtherType       OBJECT-TYPE
        SYNTAX  INTEGER (0..65535)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "Ether type value for generic ethertype."
        ::= { alaEServiceL2CustomProtocolEntry  5 }

 alaEServiceL2CustomProtocolEtherSubType       OBJECT-TYPE
        SYNTAX  INTEGER (0..255)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "if Ether type >1536 then the sub type is allowed to be configured"
        ::= { alaEServiceL2CustomProtocolEntry  6 }

alaEServiceL2CustomProtocolSsap       OBJECT-TYPE
        SYNTAX  INTEGER (0..255)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "SSAP value for generic SSAP and SNAP rules, when Ether type < 1536"
        ::= { alaEServiceL2CustomProtocolEntry  7 }

alaEServiceL2CustomProtocolDsap       OBJECT-TYPE
        SYNTAX  INTEGER (0..255)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "DSAP value for generic DSAP and SNAP rules, when Ether type < 1536"
        ::= { alaEServiceL2CustomProtocolEntry  8 }

alaEServiceL2CustomProtocolPid	       OBJECT-TYPE
        SYNTAX  INTEGER (0..65535)
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "protocol identifier in case of LLC SNAP packet"
        ::= { alaEServiceL2CustomProtocolEntry  9 }

alaEServiceL2CustomProtocolRowStatus OBJECT-TYPE
        SYNTAX  RowStatus
        MAX-ACCESS  read-create
        STATUS  current
        DESCRIPTION
        "The status of this table entry."
        ::= { alaEServiceL2CustomProtocolEntry  10}

-- Added in 6.6.3.R01 *** End

-- Added in 6.6.3.R01 *** Statistics Begin
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--   The E-Service UNI Port L2 Statistics entries Table

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alaEServiceUNIPortL2ProtocolStatisticsTable OBJECT-TYPE
        SYNTAX SEQUENCE OF AlaEServiceUNIPortL2ProtocolStatisticsEntry
        MAX-ACCESS  not-accessible
        STATUS current
        DESCRIPTION
        "A table, that contains UNI port L2 protocol frame statistics."
        ::= {alaEService 13}

alaEServiceUNIPortL2ProtocolStatisticsEntry  OBJECT-TYPE
        SYNTAX  AlaEServiceUNIPortL2ProtocolStatisticsEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
        "An E-Service Service UNI port L2 protocol statistics entry associated with an L2 protocol and a port entry."
        INDEX   {alaEServiceUNIPortID, IMPLIED alaEServiceUNIPortL2ProtocolID}
        ::= {alaEServiceUNIPortL2ProtocolStatisticsTable 1}

AlaEServiceUNIPortL2ProtocolStatisticsEntry ::= SEQUENCE
        {
                alaEServiceUNIPortID                             InterfaceIndex,
                alaEServiceUNIPortL2ProtocolID                   SnmpAdminString,
                alaEServiceUNIPortL2RxFrames                     Counter32,
                alaEServiceUNIPortL2TunneledFrames               Counter32,
                alaEServiceUNIPortL2DroppedFrames                Counter32,
                alaEServiceUNIPortL2PeeredFrames                 Counter32,
                alaEServiceUNIPortL2MACTunneledFrames            Counter32,
                alaEServiceUNIPortL2MACDeTunneledFrames          Counter32,
                alaEServiceUNIPortL2LastSourceMAC                MacAddress
        }

alaEServiceUNIPortID OBJECT-TYPE
        SYNTAX  InterfaceIndex
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
        "The interface index of the UNI."
        ::= {alaEServiceUNIPortL2ProtocolStatisticsEntry  1}

alaEServiceUNIPortL2ProtocolID OBJECT-TYPE
        SYNTAX  SnmpAdminString (SIZE (1..31))
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
"Name of the L2 protocol entry. Must be at least one character long."
        ::= { alaEServiceUNIPortL2ProtocolStatisticsEntry  2 }

alaEServiceUNIPortL2RxFrames  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
"This object describes the total number of frames of this protocol received on this port and trapped to CPU."
        ::= { alaEServiceUNIPortL2ProtocolStatisticsEntry  3 }

alaEServiceUNIPortL2TunneledFrames  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
"This object describes the total number of frames of this protocol received on this port trapped to CPU and tunneled."
        ::= { alaEServiceUNIPortL2ProtocolStatisticsEntry  4 }

alaEServiceUNIPortL2DroppedFrames  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
"This object describes the total number of frames of this protocol received on this port trapped to CPU and dropped."
        ::= { alaEServiceUNIPortL2ProtocolStatisticsEntry  5 }

alaEServiceUNIPortL2PeeredFrames  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
"This object describes the total number of frames of this protocol received on this port trapped to CPU and peered."
        ::= { alaEServiceUNIPortL2ProtocolStatisticsEntry  6 }

alaEServiceUNIPortL2MACTunneledFrames  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
"This object describes the total number of frames of this protocol received on this port trapped to CPU and MAC tunneled."
        ::= { alaEServiceUNIPortL2ProtocolStatisticsEntry  7 }

alaEServiceUNIPortL2MACDeTunneledFrames  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
"This object describes the total number of frames of this protocol received on this port trapped to CPU and MAC de-tunneled."
        ::= { alaEServiceUNIPortL2ProtocolStatisticsEntry  8 }

alaEServiceUNIPortL2LastSourceMAC        OBJECT-TYPE
        SYNTAX MacAddress
        MAX-ACCESS read-only
        STATUS  current
        DESCRIPTION
        "This object specifies the source MAC address of last frame of this protocol on this port trapped to CPU"
        ::= { alaEServiceUNIPortL2ProtocolStatisticsEntry  9 }



-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--   The E-Service NNI Port L2 Statistics entries Table

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alaEServiceNNIPortL2ProtocolStatisticsTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF AlaEServiceNNIPortL2ProtocolStatisticsEntry
        MAX-ACCESS  not-accessible
        STATUS current
        DESCRIPTION
        "A table, that contains NNI port L2 protocol frame statistics."
        ::= {alaEService 14}

alaEServiceNNIPortL2ProtocolStatisticsEntry  OBJECT-TYPE
        SYNTAX  AlaEServiceNNIPortL2ProtocolStatisticsEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
        "An E-Service NNI port L2 protocol statistics entry associated with port."
        INDEX   {alaEServiceNNIPortID}
        ::= {alaEServiceNNIPortL2ProtocolStatisticsTable 1}

AlaEServiceNNIPortL2ProtocolStatisticsEntry ::= SEQUENCE
        {
                alaEServiceNNIPortID                           InterfaceIndex,
                alaEServiceNNIPortL2RxMACTunneledFrames        Counter32,
                alaEServiceNNIPortL2MACTunneledDiscardFrames   Counter32,
                alaEServiceNNIPortL2ClearStats                 INTEGER
        }

alaEServiceNNIPortID OBJECT-TYPE
        SYNTAX  InterfaceIndex
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
        "The interface index of the NNI."
        ::= {alaEServiceNNIPortL2ProtocolStatisticsEntry  1}

alaEServiceNNIPortL2RxMACTunneledFrames  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
"This object describes the total number of frames trapped to CPU with tunnel MAC."
        ::= { alaEServiceNNIPortL2ProtocolStatisticsEntry  2 }

alaEServiceNNIPortL2MACTunneledDiscardFrames  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
"This object describes the total number of discarded frames that are trapped to CPU with tunnel MAC."
        ::= { alaEServiceNNIPortL2ProtocolStatisticsEntry  3 }

alaEServiceNNIPortL2ClearStats      OBJECT-TYPE
        SYNTAX  INTEGER {
                                default(0),
                                reset(1)
                                }
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
"This object is used to clear the NNI port statistics of the interface."
        DEFVAL  { default }
        ::= { alaEServiceNNIPortL2ProtocolStatisticsEntry  4 }

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

-- The E-Service UNI Profile L2 Total RX Statistics entries Table

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alaEServiceUNIProfileL2ProtocolTotalStatisticsTable OBJECT-TYPE
        SYNTAX SEQUENCE OF AlaEServiceUNIProfileL2ProtocolTotalStatisticsEntry
        MAX-ACCESS  not-accessible
        STATUS current
        DESCRIPTION
        "A table, that contains UNI profile L2 protocol frame total RX statistics of all ports of the profile"
        ::= {alaEService 15}

alaEServiceUNIProfileL2ProtocolTotalStatisticsEntry  OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileL2ProtocolTotalStatisticsEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
        "An E-Service UNI profile L2 protocol total RX statistics entry associated with all ports of the UNI profile."
        INDEX   {IMPLIED alaEServiceUNIProfile}
        ::= {alaEServiceUNIProfileL2ProtocolTotalStatisticsTable 1}

AlaEServiceUNIProfileL2ProtocolTotalStatisticsEntry ::= SEQUENCE
        {
                alaEServiceUNIProfile                               SnmpAdminString,
                alaEServiceUNIProfileL2ProtocolTotalRxFrames        Counter32,
                alaEServiceUNIProfileL2ProtocolClearStats           INTEGER
        }

alaEServiceUNIProfile OBJECT-TYPE
      SYNTAX  SnmpAdminString (SIZE (1..31))
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
      "A label given to uniquely identify this profile. Must be at least one character long."
      ::= { alaEServiceUNIProfileL2ProtocolTotalStatisticsEntry 1}

alaEServiceUNIProfileL2ProtocolTotalRxFrames  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
"This object describes the total number of frames L2 protocol frames received by all the ports of bind to this profile."
        ::= { alaEServiceUNIProfileL2ProtocolTotalStatisticsEntry 2 }

alaEServiceUNIProfileL2ProtocolClearStats      OBJECT-TYPE
        SYNTAX  INTEGER {
                                default(0),
                                reset(1)
                                }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
"This object is used to clear the UNI profile statistics of the interface."
        DEFVAL  { default }
        ::= { alaEServiceUNIProfileL2ProtocolTotalStatisticsEntry 3 }

--   The E-Service UNI Profile L2 Well Known protocl RX Statistics entries Table

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaEServiceUNIProfileIEEEL2ProtocolStatisticsTable OBJECT-TYPE
        SYNTAX SEQUENCE OF AlaEServiceUNIProfileIEEEL2ProtocolStatisticsEntry
        MAX-ACCESS  not-accessible
        STATUS current
        DESCRIPTION
        "A table, that contains UNI profile L2 well known protocol frame RX statistics of all ports of the profile"
        ::= {alaEService 16}

alaEServiceUNIProfileIEEEL2ProtocolStatisticsEntry  OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileIEEEL2ProtocolStatisticsEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
        "An E-Service UNI profile L2 well known protocol RX statistics entry associated with all ports of the UNI profile."
        INDEX   {alaEServiceUNIProfileIEEEL2ProfileID, alaEServiceUNIProfileIEEEL2ProtocolIndex}
        ::= {alaEServiceUNIProfileIEEEL2ProtocolStatisticsTable 1}

AlaEServiceUNIProfileIEEEL2ProtocolStatisticsEntry ::= SEQUENCE
        {
                alaEServiceUNIProfileIEEEL2ProfileID               SnmpAdminString,
                alaEServiceUNIProfileIEEEL2ProtocolIndex           INTEGER, 
                alaEServiceUNIProfileIEEEL2ProtocolRxFrames        Counter32,
	        alaEServiceUNIProfileIEEEL2ProtocolTreatment       INTEGER 
        }

alaEServiceUNIProfileIEEEL2ProfileID OBJECT-TYPE
      SYNTAX  SnmpAdminString (SIZE (1..31))
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
      "A label given to uniquely identify this profile. Must be at least one character long."
      ::= { alaEServiceUNIProfileIEEEL2ProtocolStatisticsEntry 1}

alaEServiceUNIProfileIEEEL2ProtocolIndex OBJECT-TYPE
        SYNTAX   INTEGER
        {
                lacpLacpmarkerOam (1),
                ieee802dot1x (2),
                lldp (3),
                amap (4),
                cisco (5),
                stp (6),
                gvrpMvrp (7)
        }
        MAX-ACCESS not-accessible
        STATUS  current
        DESCRIPTION
        "This object specifies the well known protocol group this row corresponds to."
        ::= {alaEServiceUNIProfileIEEEL2ProtocolStatisticsEntry 2 }

alaEServiceUNIProfileIEEEL2ProtocolRxFrames  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
        "This object describes the number of frames this L2 well known protocol frames
        received by all the ports of bind to this profile."
        ::= { alaEServiceUNIProfileIEEEL2ProtocolStatisticsEntry 3 }

alaEServiceUNIProfileIEEEL2ProtocolTreatment  OBJECT-TYPE
        SYNTAX  INTEGER 
        {
             invalid (0),
             fwd (1),
             drop (2),
             cpu (3)
        }
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the destination Mac address
        matching with the L2 Custom protocol entry mac address on the UNI. Tunnel (1) enables the
        PDU to be tunneled across the provider network.  Discard (2) causes the PDU of the protocol
        to be discarded and not enter the provider network. Peer (3) means that on this port the
        bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunneling."
        ::= { alaEServiceUNIProfileIEEEL2ProtocolStatisticsEntry  4 }

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--   The E-Service UNI Profile L2 RX Statistics entries Table

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alaEServiceUNIProfileCustomL2ProtocolStatisticsTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF AlaEServiceUNIProfileCustomL2ProtocolStatisticsEntry
        MAX-ACCESS  not-accessible
        STATUS current
        DESCRIPTION
        "A table, that contains UNI profile L2 protocol frame RX statistics of all ports of the profile.  Each entry
         represents statistics collected for one protocol of the UNI profile."
        ::= {alaEService 17}


alaEServiceUNIProfileCustomL2ProtocolStatisticsEntry  OBJECT-TYPE
        SYNTAX  AlaEServiceUNIProfileCustomL2ProtocolStatisticsEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
        "An E-Service UNI profile L2 protocol RX statistics entry associated with all ports of the UNI profile."
        INDEX   {alaEServiceUNIProfileCustomL2StatsProfileID, alaEServiceUNIProfileCustomL2ProtocolIndex}
        ::= {alaEServiceUNIProfileCustomL2ProtocolStatisticsTable 1}

AlaEServiceUNIProfileCustomL2ProtocolStatisticsEntry ::= SEQUENCE
        {
                alaEServiceUNIProfileCustomL2StatsProfileID            SnmpAdminString,
                alaEServiceUNIProfileCustomL2ProtocolIndex             SnmpAdminString,
                alaEServiceUNIProfileCustomL2ProtocolRxFrames          Counter32,
	        alaEServiceUNIProfileCustomL2ProtocolTreatment         INTEGER 
        }

alaEServiceUNIProfileCustomL2StatsProfileID OBJECT-TYPE
      SYNTAX  SnmpAdminString (SIZE (1..31))
      MAX-ACCESS not-accessible
      STATUS current
      DESCRIPTION
      "A label given to uniquely identify this profile. Must be at least one character long."
      ::= { alaEServiceUNIProfileCustomL2ProtocolStatisticsEntry 1}

alaEServiceUNIProfileCustomL2ProtocolIndex OBJECT-TYPE
      SYNTAX  SnmpAdminString (SIZE (1..31))
      MAX-ACCESS not-accessible 
      STATUS  current
      DESCRIPTION
"Name of the L2 protocol entry. Must be at least one character long."
      ::= { alaEServiceUNIProfileCustomL2ProtocolStatisticsEntry  2 }

alaEServiceUNIProfileCustomL2ProtocolRxFrames  OBJECT-TYPE
        SYNTAX  Counter32
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
"This object describes the total number of frames of this protocol received on this port and trapped to CPU."
        ::= { alaEServiceUNIProfileCustomL2ProtocolStatisticsEntry  3 }

alaEServiceUNIProfileCustomL2ProtocolTreatment  OBJECT-TYPE
        SYNTAX INTEGER 
        {
             invalid (0),
             fwd (1),
             drop (2),
             cpu (3)
        }
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
        "This object describes the behavior of the bridge in regards to the destination Mac address
        matching with the L2 Custom protocol entry mac address on the UNI. Tunnel (1) enables the
        PDU to be tunneled across the provider network.  Discard (2) causes the PDU of the protocol
        to be discarded and not enter the provider network. Peer (3) means that on this port the
        bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunneling."
        ::= { alaEServiceUNIProfileCustomL2ProtocolStatisticsEntry  4 }

alaEServiceL2PTProtocolStatisticsClear OBJECT IDENTIFIER ::= { alaEService 18 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--   The E-Service UNI Port L2  Statistics Global Clear

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alaEServiceUNIPortL2GlobalClearStatistics         OBJECT-TYPE
                SYNTAX          INTEGER {
                                default(0),
                                reset(1)
                                }
                MAX-ACCESS      read-write
                STATUS          current
                DESCRIPTION
                        "Defines the global clear control for L2 protocol statistics of all UNI ports
                        The value reset (1) indicates  clear UNI port statistics
                        of all ports in the system. By default, this object contains a zero value."
                DEFVAL  { default }
                ::= { alaEServiceL2PTProtocolStatisticsClear 1 }


-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--   The E-Service NNI Port L2 Statistics Global Clear

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alaEServiceNNIPortL2GlobalClearStatistics         OBJECT-TYPE
                SYNTAX          INTEGER {
                                default(0),
                                reset(1)
                                }
                MAX-ACCESS      read-write
                STATUS          current
                DESCRIPTION
                        "Defines the global clear control for L2 protocol statistics of all NNI ports
                        The value reset (1) indicates  clear NNI port statistics
                        of all ports in the system. By default, this object contains a zero value."
                DEFVAL  { default }
                ::= { alaEServiceL2PTProtocolStatisticsClear 2 }


-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--   The E-Service UNI Profile L2 Statistics Global Clear

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alaEServiceUNIProfileL2GlobalClearStatistics         OBJECT-TYPE
                SYNTAX          INTEGER {
                                default(0),
                                reset(1)
                                }
                MAX-ACCESS      read-write
                STATUS          current
                DESCRIPTION
                        "Defines the global clear control for L2 protocol statistics of all UNI profiles
                        The value reset (1) indicates  clear UNI profile statistics
                        of all ports in the system. By default, this object contains a zero value."
                DEFVAL  { default }
                ::= { alaEServiceL2PTProtocolStatisticsClear 3 }

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

--   The E-Service UNI Port L2 Statistics Clear Table

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alaEServiceUNIPortL2ProtocolStatisticsClearTable OBJECT-TYPE
        SYNTAX SEQUENCE OF AlaEServiceUNIPortL2ProtocolStatisticsClearEntry
        MAX-ACCESS  not-accessible
        STATUS current
        DESCRIPTION
        "A table, to clear UNI port L2 protocol frame statistics."
        ::= {alaEService 19}

alaEServiceUNIPortL2ProtocolStatisticsClearEntry  OBJECT-TYPE
        SYNTAX  AlaEServiceUNIPortL2ProtocolStatisticsClearEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
        "An E-Service Service UNI port L2 protocol statistics clear entry associated with port."
        INDEX   {alaEServiceUNIPortClearID}
        ::= {alaEServiceUNIPortL2ProtocolStatisticsClearTable 1}

AlaEServiceUNIPortL2ProtocolStatisticsClearEntry ::= SEQUENCE
        {
                alaEServiceUNIPortClearID                             InterfaceIndex,
                alaEServiceUNIPortL2ClearStats                   INTEGER
        }

alaEServiceUNIPortClearID OBJECT-TYPE
        SYNTAX  InterfaceIndex
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
        "The interface index of the UNI."
        ::= {alaEServiceUNIPortL2ProtocolStatisticsClearEntry  1}

alaEServiceUNIPortL2ClearStats      OBJECT-TYPE
        SYNTAX  INTEGER {
                                default(0),
                                reset(1)
                                }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
"This object is used to clear the UNI port statistics of the interface."
        DEFVAL  { default }
        ::= { alaEServiceUNIPortL2ProtocolStatisticsClearEntry  2 }

 alaEServiceNNIPortL2ProtocolStatisticsClearTable OBJECT-TYPE   
 SYNTAX SEQUENCE OF AlaEServiceNNIPortL2ProtocolStatisticsClearEntry    
 MAX-ACCESS  not-accessible   
 STATUS current   
 DESCRIPTION   
 "A table, to clear NNI port L2 protocol frame statistics."   
 ::= {alaEService 20}   
    
 alaEServiceNNIPortL2ProtocolStatisticsClearEntry OBJECT-TYPE   
 SYNTAX AlaEServiceNNIPortL2ProtocolStatisticsClearEntry   
 MAX-ACCESS  not-accessible   
 STATUS current   
 DESCRIPTION   
 "An E-serive to clear NNI port L2 protocol frame statistics."   
 INDEX   {alaEServiceNNIPortClearID}   
 ::= { alaEServiceNNIPortL2ProtocolStatisticsClearTable 1 }   

    
 AlaEServiceNNIPortL2ProtocolStatisticsClearEntry ::= SEQUENCE   
 {   
                 alaEServiceNNIPortClearID                             InterfaceIndex,   
                 alaEServiceNNIPortL2ClearStatistics                 INTEGER   
 }   
    
 alaEServiceNNIPortClearID OBJECT-TYPE   
 SYNTAX  InterfaceIndex   
 MAX-ACCESS not-accessible   
 STATUS current   
 DESCRIPTION   
 "The interface index of the NNI."   
 ::= {alaEServiceNNIPortL2ProtocolStatisticsClearEntry  1}   
    
 alaEServiceNNIPortL2ClearStatistics      OBJECT-TYPE    
  SYNTAX  INTEGER {    
  default(0),    
  reset(1)    
  }    
 MAX-ACCESS  read-write    
 STATUS  current    
 DESCRIPTION  "This object is used to clear the NNI port statistics of the interface."    
 DEFVAL  { default }    
          ::= { alaEServiceNNIPortL2ProtocolStatisticsClearEntry 2 }   


-- Added in 6.6.3.R01 *** Statistics End

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- COMPLIANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alcatelIND1EServiceMIBCompliance MODULE-COMPLIANCE
        STATUS  current
        DESCRIPTION
        "Compliance statement for E-Service."
        MODULE  MANDATORY-GROUPS
        {
                alaEServiceSapProfileGroup,
                alaEServiceUNIProfileGroup,
                alaEServiceGroup,
                alaEServiceSapGroup,
                alaEServiceSapUniGroup,
                alaEServiceSapCvlanGroup,
                alaEServicePortGroup, 
                alaEServiceNniSvlanGroup,
		alaEServiceSapCvlanPortStatGroup,
                alaEServiceInfoGroup
                }
        ::= { alcatelIND1EServiceMIBCompliances 1 }

-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- UNITS OF CONFORMANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

alaEServiceSapProfileGroup OBJECT-GROUP
        OBJECTS
        {
		alaEServiceSapProfileCVLANTreatment,    
		alaEServiceSapProfileReplacementCVLAN,  
		alaEServiceSapProfilePriorityMapMode,   
		alaEServiceSapProfileFixedPriority,     
		alaEServiceSapProfileIngressBW,         
                alaEServiceSapProfileBandwidthShare,
		alaEServiceSapProfileRowStatus,
		alaEServiceSapProfileEgressBW,
		alaEServiceSapProfileCIR,
		alaEServiceSapProfileCBS,
		alaEServiceSapProfilePIR,
		alaEServiceSapProfilePBS,
		alaEServiceSapProfileDepth     
        }
        STATUS  current
        DESCRIPTION
        "Collection of objects for management of E-Service Sap Profiles."
        ::= { alcatelIND1EServiceMIBGroups 1 }

alaEServiceUNIProfileGroup OBJECT-GROUP
        OBJECTS
        {
		alaEServiceUNIProfileStpBpduTreatment,	   
		alaEServiceUNIProfile8021xTreatment,	   
		alaEServiceUNIProfile8021ABTreatment,	   
		alaEServiceUNIProfile8023adTreatment,	   
		alaEServiceUNIProfileGvrpTreatment,	   
		alaEServiceUNIProfileAmapTreatment,	   
		alaEServiceUNIProfileRowStatus,
		alaEServiceUNIProfileMvrpTreatment,
		alaEServiceUNIProfileTunnelMac,
                alaEServiceUNIProfileLacpMarkerTreatment,       
                alaEServiceUNIProfileOamTreatment,      
                alaEServiceUNIProfileCiscoPagpTreatment,      
                alaEServiceUNIProfileCiscoUdldTreatment,       
                alaEServiceUNIProfileCiscoCdpTreatment,
                alaEServiceUNIProfileCiscoVtpTreatment,         
                alaEServiceUNIProfileCiscoDtpTreatment,        
                alaEServiceUNIProfileCiscoPvstTreatment,          
                alaEServiceUNIProfileCiscoVlanTreatment,            
                alaEServiceUNIProfileCiscoUplinkTreatment,
                alaEServiceUNIProfileIeeeMacTreatment          
        }
        STATUS current
        DESCRIPTION
        "Collection of objects for management of EService UNI Profiles."
        ::= { alcatelIND1EServiceMIBGroups 2 }

alaEServiceGroup OBJECT-GROUP
        OBJECTS
        {
		alaEServiceSVLAN,    	
                alaEServiceVlanType,
		alaEServiceRowStatus,
		alaEServiceStatGreenCount,
		alaEServiceStatYellowCount,
		alaEServiceStatRedCount,
		alaEServiceStatTotalCount	
        }
        STATUS  current
        DESCRIPTION
        "Collection of objects for management of E-Services."
        ::= { alcatelIND1EServiceMIBGroups 3 }
		
alaEServiceSapGroup OBJECT-GROUP
        OBJECTS
        {

                alaEServiceSapServiceID,
                alaEServiceSapProfile,
		alaEServiceSapRowStatus
        }
        STATUS  current
        DESCRIPTION
        "Collection of objects for management of E-Service SAPs."
        ::= { alcatelIND1EServiceMIBGroups 4 }

alaEServiceSapCvlanGroup OBJECT-GROUP
        OBJECTS
        {
		alaEServiceSapCvlanMapType,      
		alaEServiceSapCvlanRowStatus		

        }
        STATUS  current
        DESCRIPTION
        "Collection of objects for management of E-Service SAP CVLAN bindings."
        ::= { alcatelIND1EServiceMIBGroups 5 }


alaEServicePortGroup OBJECT-GROUP
        OBJECTS
        {
                alaEServicePortType,
		alaEServicePortVendorTpid,
		alaEServicePortLegacyStpBpdu,
		alaEServicePortLegacyGvrpPdu,
		alaEServicePortUniProfile,
		alaEServicePortTransBridging,
		alaEServicePortLegacyMvrpPdu
        }
        STATUS  current
        DESCRIPTION
        "Collection of objects for management of E-Service Ports."
        ::= { alcatelIND1EServiceMIBGroups 6 }

alaEServiceSapUniGroup OBJECT-GROUP
        OBJECTS
        {
		alaEServiceSapUniRowStatus

        }
        STATUS  current
        DESCRIPTION
        "Collection of objects for management of E-Service SAP to UNI 
        Binding."
        ::= { alcatelIND1EServiceMIBGroups 7 }

alaEServiceNniSvlanGroup OBJECT-GROUP
        OBJECTS
        {
		alaEServiceNniSvlanRowStatus,
		alaEServiceNniSvlanVpaType

        }
        STATUS  current
        DESCRIPTION
        "Collection of objects for management of E-Service SVLAN to NNI
        Binding."
        ::= { alcatelIND1EServiceMIBGroups 8 }
alaEServiceSapCvlanPortStatGroup OBJECT-GROUP
        OBJECTS
        {
		alaEServiceSapCvlanPortStatGreenCount,
		alaEServiceSapCvlanPortStatYellowCount,
		alaEServiceSapCvlanPortStatRedCount,
		alaEServiceSapCvlanPortStatTotalCount
	}
	STATUS  current
        DESCRIPTION
        "Collection of objects for srTCM and trTCM Counters."
	::= { alcatelIND1EServiceMIBGroups 9 }

alaEServiceInfoGroup	OBJECT-GROUP
        OBJECTS
        {
		alaEServiceMode,
		alaEServiceStatReset,
      		alaEServiceL2MacTunnel,
      		alaEServiceUntaggedMode
	}
	STATUS  current
	DESCRIPTION
	"Collection of E-Service Global Objects."
	::= { alcatelIND1EServiceMIBGroups 10 } 

-- Added in 6.6.3.R01 *** Begin

alaEServiceUNIProfileL2CustomProtocolGroup OBJECT-GROUP
      OBJECTS
      {
            alaEServiceUNIProfileL2CustomProtocolTreatment,
            alaEServiceUNIProfileL2CustomProtocolRowStatus
      }
      STATUS  current
      DESCRIPTION
      "Collection of objects for management of E-Service UNI Profile
      to L2 Custom Protocol bindings."
      ::= { alcatelIND1EServiceMIBGroups 11 }

alaEServiceL2CustomProtocolGroup OBJECT-GROUP
        OBJECTS
        {
            alaEServiceL2CustomProtocolEntryType,
            alaEServiceL2CustomProtocolMac,
            alaEServiceL2CustomProtocolMask,
            alaEServiceL2CustomProtocolEtherType,
            alaEServiceL2CustomProtocolEtherSubType,
            alaEServiceL2CustomProtocolSsap,
            alaEServiceL2CustomProtocolDsap,
            alaEServiceL2CustomProtocolPid,
            alaEServiceL2CustomProtocolRowStatus
        }
        STATUS  current
        DESCRIPTION
        "Collection of objects for management of E-Service L2 Custom Protocol Group."
        ::= { alcatelIND1EServiceMIBGroups 12}
-- Added in 6.6.3.R01 *** End

-- Added in 6.6.3.R01 *** Begin Statistics
alaEServiceUNIPortL2StatisticsGroup  OBJECT-GROUP 
        OBJECTS
        {
                alaEServiceUNIPortL2RxFrames,
                alaEServiceUNIPortL2TunneledFrames,
                alaEServiceUNIPortL2DroppedFrames,
                alaEServiceUNIPortL2PeeredFrames,
                alaEServiceUNIPortL2MACTunneledFrames,
                alaEServiceUNIPortL2MACDeTunneledFrames,
                alaEServiceUNIPortL2LastSourceMAC
        }
        STATUS  current
        DESCRIPTION
            "Collection of objects for UNI port statistics management of E-Service L2 Tunneling Protocol Group."
        ::= { alcatelIND1EServiceMIBGroups 13}

alaEServiceNNIPortL2StatisticsGroup OBJECT-GROUP 
        OBJECTS
        {
                alaEServiceNNIPortL2RxMACTunneledFrames,
		  alaEServiceNNIPortL2MACTunneledDiscardFrames
        }
        STATUS  current
        DESCRIPTION
            "Collection of objects for NNI port statistics management of E-Service L2 Tunneling Protocol Group."
        ::= { alcatelIND1EServiceMIBGroups 14}

alaEServiceUNIProfileL2ProtocolTotalStatisticsGroup OBJECT-GROUP 
        OBJECTS
        {
                alaEServiceUNIProfileL2ProtocolTotalRxFrames,
                alaEServiceUNIProfileL2ProtocolClearStats
        }
        STATUS  current
        DESCRIPTION
            "Collection of objects for UNI profile statistics management of E-Service L2 Tunneling Protocol Group."
        ::= { alcatelIND1EServiceMIBGroups 15}

alaEServiceUNIProfileIEEEL2ProtocolStatisticsGroup OBJECT-GROUP
        OBJECTS
        {
                alaEServiceUNIProfileIEEEL2ProtocolRxFrames,
	            alaEServiceUNIProfileIEEEL2ProtocolTreatment
        }
        STATUS  current
        DESCRIPTION
            "Collection of objects for UNI profile statistics for well known protocols of E-Service L2 Tunneling Protocol Group."
        ::= { alcatelIND1EServiceMIBGroups 16}

alaEServiceUNIProfileL2ProtocolStatisticsGroup OBJECT-GROUP
        OBJECTS
        {
                alaEServiceUNIProfileCustomL2ProtocolRxFrames,
	            alaEServiceUNIProfileCustomL2ProtocolTreatment
        }
        STATUS  current
        DESCRIPTION
            "Collection of objects for UNI profile statistics management of E-Service L2 Tunneling Protocol Group."
        ::= { alcatelIND1EServiceMIBGroups 17}

alaEServiceL2PTProtocolStatisticsClearGroup OBJECT-GROUP 
        OBJECTS
        {
                alaEServiceUNIPortL2GlobalClearStatistics,
                alaEServiceNNIPortL2GlobalClearStatistics,
				alaEServiceUNIProfileL2GlobalClearStatistics
        }
        STATUS  current
        DESCRIPTION
            "Collection of objects for UNI profile statistics management of E-Service L2 Tunneling Protocol Group."
        ::= { alcatelIND1EServiceMIBGroups 18}

alaEServiceUNIPortL2StatisticsClearGroup  OBJECT-GROUP 
        OBJECTS
        {
                alaEServiceUNIPortL2ClearStats
        }
        STATUS  current
        DESCRIPTION
            "Collection of objects for UNI port statistics management of E-Service L2 Tunneling Protocol Group."
        ::= { alcatelIND1EServiceMIBGroups 19}
 alaEServiceNNIPortL2StatisticsClearGroup  OBJECT-GROUP    
	OBJECTS   
	{
		alaEServiceNNIPortL2ClearStatistics   
	}
	STATUS  current
	DESCRIPTION 
		"Collection of objects for NNI port statistics management of E-Service L2 Tunneling Protocol Group."
	::= { alcatelIND1EServiceMIBGroups 20} 

-- Added in 6.6.3.R01 *** End Statistics

END

