Belgian HOWTO

Dag Wiers

dag@wieers.com
Revision History                                                             
Revision 1.1.0            2001-05-01           Revised by: dag               
Converted to DocBook v4.1                                                    


This document describes how to tweak Linux for Belgian users and lists Linux
user groups, businesses and other resources in Belgium.

-----------------------------------------------------------------------------
Table of Contents
1. Introduction
    1.1. Why this document?
    1.2. New versions of this document
    1.3. Translated versions
    1.4. Contributions
    1.5. Feedback
    1.6. Legal stuff
    1.7. Todo
   
   
2. Configuration
    2.1. Keyboard setup
        2.1.1. Console
        2.1.2. XFree86
       
       
    2.2. Display and applications
        2.2.1. Using the ISO-8859-1 font in console
        2.2.2. Support for the Euro symbol
       
       
    2.3. Time zone
    2.4. Locale support
        2.4.1. Dutch
        2.4.2. French
        2.4.3. German
        2.4.4. Walloon
       
       
    2.5. Native language support and codepages
   
   
3. Setting up Internet (Belgian ISP information)
    3.1. Dialing in with your modem (PPP)
        3.1.1. Configuring the modem
        3.1.2. Installing pppd
        3.1.3. pap-secrets / chap-secrets
        3.1.4. Network
        3.1.5. File permissions
        3.1.6. Dial + Hangup
        3.1.7. ISP-dependant information
            3.1.7.1. Cable&Wireless (Online, TijdNet)
            3.1.7.2. KPN Belgium (Eunet)
            3.1.7.3. Planet Internet (Ping)
            3.1.7.4. Skynet (Belgacom)
            3.1.7.5. Tiscalinet (Freegates, FreeBel)
            3.1.7.6. UUNet (VT4)
            3.1.7.7. Wanadoo (Euronet)
            3.1.7.8. World Online
            3.1.7.9. XS4ALL
            3.1.7.10. Yucom (DMA)
           
           
       
       
    3.2. Dialing in with your ISDN-modem
        3.2.1. Updating the kernel
        3.2.2. ISDN4Linux toolkit
        3.2.3. Configuring the interface
        3.2.4. pap-secrets / chap-secrets
        3.2.5. Network
        3.2.6. File permissions
        3.2.7. Dial + Hangup
       
       
    3.3. Cablemodem (DHCP)
        3.3.1. UPC Belgium (Chello, TVD)
        3.3.2. Pandora (Telenet)
       
       
    3.4. ADSL
        3.4.1. Easynet
        3.4.2. KPN Belgium (Eunet)
        3.4.3. Turboline (Belgacom)
       
       
   
   
4. Belgian Linux user groups
    4.1. ALLIN Linux User Group
    4.2. Antwerp Linux User Group (ALUG)
    4.3. Brussels Linux User Group (BeLUGa)
    4.4. Computer Forum KaHo (CFK)
    4.5. HCC Limburgse Linux Gebruikers Groep (HLLGG)
    4.6. HCC Linux Gebruikers Groep Leuven
    4.7. Independent Group of Unix-Alikes and Network Activists (IGUANA)
    4.8. Infogroep (IGWE)
    4.9. Leuvense Linux Users (L2U)
    4.10. Limburgse Linux User Group (LILUG)
    4.11. Linux User Group De Bruxelles (BxLUG)
    4.12. Linux User Group De Charleroi
    4.13. Linux User Group De Lige
    4.14. Linux User Group De Namur
    4.15. Linux User Group Heist op den Berg
    4.16. Linux User Group Mons
    4.17. Linux User Movement Underground Mad Belgian Aliens (LUMUMBA)
    4.18. LinuxBe.Org A.S.B.L
    4.19. Louvain-Li-nux (LLN)
    4.20. Open Technology Assembly Linux Special Interest Group
    4.21. PC Aktief Computerclub
    4.22. Python Blanc Blue Belge (P3B)
    4.23. Student Information Networking (SIN)
    4.24. TINA
    4.25. Unix Lovers Yield Student Services & Internet Support (ULYSSIS)
    4.26. West-Vlaamse Linux User Group (Lug-WV)
    4.27. Zeus WPI - Werkgroep Informatica RUG
   
   
5. Belgian Linux businesses
    5.1. aDOC Services
    5.2. Arafox
    5.3. Aragne
    5.4. Better Access N.V.
    5.5. BIOS Consulting sa/nv
    5.6. CSS N.V.
    5.7. D. Connect
    5.8. Double Barrel Consultancy and Productions
    5.9. Grmbl productions
    5.10. IBM Belgium SA/NV
    5.11. IP Net generation
    5.12. Kangaroot Linux Consultancy
    5.13. Mind Linux Solutions
    5.14. Phidani Software SPRL
    5.15. Spier BVBA
    5.16. Stone-IT Belgium
    5.17. VA Linux Belgium
    5.18. VirgoPlus sprl
   
   
6. Belgian Linux resources
    6.1. Websites
        6.1.1. Linux in Belgium
        6.1.2. Dutch Linux-sites
        6.1.3. French Linux-sites
        6.1.4. Mirrors in Belgium
       
       
    6.2. HOWTO
    6.3. HOWTO translations
        6.3.1. Dutch
        6.3.2. French
        6.3.3. German
       
       
    6.4. FTP
        6.4.1. Kernel-source mirrors
        6.4.2. Distribution mirrors
        6.4.3. Mirrors in Belgium
       
       
    6.5. Usenet/Newsgroups
    6.6. IRC
   
   

-----------------------------------------------------------------------------
1. Introduction

1.1. Why this document?

Since there was no information anywhere on the net for Belgian Linux users,
we started to collect stuff that we thought could be important. This HOWTO
aims to be the definitive list of all Belgian-related Linux information. If
you think not, you have no excuse to complain and certainly not to not
contribute. ;)
-----------------------------------------------------------------------------

1.2. New versions of this document

If you need to know more about the Linux Documentation Project or about Linux
HOWTO's, feel free to contact the supervisor Tim Bynum <
linux-howto@sunsite.unc.edu>.

Tim Bynum will post the listing to several national and international
newsgroups on a monthly basis. In addition, the Belgian HOWTO can be found on
the World Wide Web at [http://dag.wieers.com/howto/] http://dag.wieers.com/
howto/. New versions of the Belgian HOWTO are always placed at this site
first, so please be sure to check if the copy you are reading is still up to
date!
-----------------------------------------------------------------------------

1.3. Translated versions

This document is currently translated in 3 languages (English, Dutch and
French), we're trying to keep all three of them in sync, but the English
version is the source-document!

The English and Dutch version are maintained by Dag Wiers <dag@wieers.com>
and is found at: [http://dag.wieers.com/howto/] http://dag.wieers.com/howto/.

The French version is maintained by Dany Vanderroost <danyv@euronet.be> and
is found at: [http://club.euronet.be/dany.vanderroost/howto.html] http://
club.euronet.be/dany.vanderroost/howto.html.
-----------------------------------------------------------------------------

1.4. Contributions

A few people mailed us their suggestions and improvements, thanks go to:

*Wim Vandeputte <wvdputte@reptile.rug.ac.be>
   
*Pablo Saratxaga <srtxg@ping.be>
   
*Christophe Lambin <clambin@skynet.be>
   
*Geert Uytterhoeven <geert@linux-m68k.org>
   

Many thanks go to Ivo Clarysse <soggie@iguana.be> who started something
similar earlier ([http://linbel.iguana.be/] http://linbel.iguana.be/) and his
project helped us a lot to get this document online.
-----------------------------------------------------------------------------

1.5. Feedback

If some information seems to be wrong, deceptive or missing, we'd appreciate
if you mailed us the improvements. Since we're just human this document isn't
bug-free, but your contribution can and will make a difference.

To add yourself to the Linux user groups or businesses, collect all necessary
information and mail it to us.
-----------------------------------------------------------------------------

1.6. Legal stuff

Trademarks are owned by their owners.

Although the information given in this document is believed to be correct,
the author will accept no liability for the content of this document. Use the
tips and examples given herein at your own risk.

Copyright  1998, 1999, 2000 by Dag Wiers. This document may be distributed
only subject to the terms and conditions set forth in [http://
www.linuxdoc.org/LDP-COPYRIGHT.html] the LDP license.
-----------------------------------------------------------------------------

1.7. Todo

There are some things I'm planning to add to this document, if you're
interested be sure you're reading the most current version of this document.
(This todo-list is only a reminder to myself, it is not in the translated
documents!)

*Integrate [http://linbel.iguana.be/] LinBel some more (should have done
    this a long time ago)
   
*Add details about how to get Ispell-software for your own language
   
*Add more information about ADSL/DANA
   

-----------------------------------------------------------------------------
2. Configuration

2.1. Keyboard setup

Linux provides 2 ways to set up your keyboard. At the console you can use 
loadkeys and under XFree86 you can use xmodmap.
-----------------------------------------------------------------------------

2.1.1. Console

To use the keytable for a Belgian keyboard you can use loadkeys be2-latin1 or
loadkeys be-latin1. The only difference between the two is that be2-latin1
adds support for twosuperior and threesuperior (keycode 41) and grave
(keycode 43).

Usually loadkeys is started at boottime from the scripts located somewhere in
/etc/rc.d. Different distributions handle it differentely. But most
distributions have a simple program (like kbdconfig in Red Hat, 
install-keymap in Debian or yast in SuSE) to change the scripts.
-----------------------------------------------------------------------------

2.1.2. XFree86

To set your keyboard properly under XFree86 you've got more choices. By
running Xconfigurator (or a similar program) a config-file for XFree86 is
created (with some standard content). This file is called XF86Config and is
usually located in /etc or /etc/X11

Make sure (and change otherwise) that something similar to this is given
under the Keyboard Section.
        Section "Keyboard"                                                   
                Protocol        "Standard"                                   
                XkbRules        "xfree86"                                    
                XkbModel        "pc101"                                      
                XkbLayout       "be"                                         
        EndSection                                                           
                                                                             

If you own a 'microsoft' keyboard (or the less-known penguin keyboards ;p)
you can enable those extra 3 keys by changing the "pc101" into "pc104". (I
use the extra keys as meta-keys in my windowmanager so some shortcuts doesn't
conflict with the internal ones of my wm).

To get the AltGr key to work under XFree86 simply add in the Keyboard
Section:
                RightAlt        ModeShift                                    
                                                                             

To get some key-combinations working under X11, you might want to change in
file /usr/X11R6/lib/X11/xkb/symbols/be:
        key <AD11> {      [ dead_circumflex,       diaeresis      ],         
                        [     bracketleft                       ]       };   
        key <AC11> {      [          ugrave,         percent      ],         
                        [      quoteright                       ]       };   
        key <BKSL> {      [              mu,        sterling      ],         
                        [       quoteleft                       ]       };   
        key <AB10> {      [           equal,            plus      ],         
                        [      asciitilde                       ]       };   
                                                                             
by
        key <AD11> {      [ dead_circumflex,  dead_diaeresis      ],         
                        [     bracketleft                       ]       };   
        key <AC11> {      [          ugrave,         percent      ],         
                        [      dead_acute                       ]       };   
        key <BKSL> {      [              mu,        sterling      ],         
                        [      dead_grave                       ]       };   
        key <AB10> {      [           equal,            plus      ],         
                        [      dead_tilde                       ]       };   
                                                                             

Some people prefer to use a 'Compose'-key to enter their special characters,
like:
        Compose-' e    =>                                                   
        Compose-/ o    =>                                                   
        Compose-c ,    =>                                                   
        Compose-c o    =>                                                   
        Compose-s s    =>                                                   
                                                                             
The solution is to enter xmodmap -e "keycode xx = Multi_key" or xmodmap -e
"keysym yy = Multi_key" where 'xx' is the keycode or 'yy' the keysym of the
key you choose to be the 'Compose'-key. (use xev to get these values)

Alternatively you can add keycode xx = Multi_key to your ~/.xmodmaprc. This
way it happens automagically.
-----------------------------------------------------------------------------

2.2. Display and applications

Some applications have to be compiled as 8-bit clean to work well with the
European characterset. Others like to be told in advance.
-----------------------------------------------------------------------------

2.2.1. Using the ISO-8859-1 font in console

You can load the ISO-8859-1 font by typing the following in console:
        setfont lat1u-16.psf                                                 
        mapscrn trivial                                                      
        echo -ne '\033(K'                                                    
                                                                             

To be able to use , ,  or  in console, you might want to add these to
your ~/.inputrc:
        set meta-flag on                                                     
        set convert-meta off                                                 
        set output-meta on                                                   
                                                                             
(This must be done for every user, if you want this to be default for all
users you can either add this file to /etc/skel/ or you could add these lines
to /etc/inputrc and add the following to /etc/bashrc, export INPUTRC=/etc/
inputrc)

   
    Note!: This is only useful to programs that use readline (like bash)
   
Also set the following environment variables:
        LC_CTYPE=iso-8859-1                                                  
        SYSFONT=lat1u-16.psf                                                 
        SYSTERM=linux                                                        
                                                                             
-----------------------------------------------------------------------------

2.2.2. Support for the Euro symbol

Since Europe had to invent a new character, the Euro, there's a new standard.
It's called ISO-8859-15 (aka Latin-9 or Latin-0). To add support you need
both a new font and new keymaps. This is part of every major distribution
nowadays, if you have an older distributions you probably need a newer 
console-tools package.

The changes in the keymap-file consist of the following lines:
        keycode  18 = +e        +E      currency                             
        keycode  46 = +c        +C      cent                                 
                                                                             
And the following environment-variable should be set:
        SYSFONT=lat0-16.psf                                                  
                                                                             
to make sure you're using the right font.
-----------------------------------------------------------------------------

2.3. Time zone

Since Belgium is located in the Central European Time zone (aka MET) which
(in the winter) is equivalent to the Greenwhich Mean Time plus 1 (GMT+1), you
can simply link /usr/lib/zoneinfo/localtime/MET to /etc/localtime symbolicly
like:
        ln -sf /usr/lib/zoneinfo/MET /etc/localtime                          
                                                                             
or
        ln -sf /usr/lib/zoneinfo/Europe/Brussels /etc/localtime              
                                                                             
This automagically sets Daylight Savings (which is GMT+2 in the summer).

   
    Note!: Different distributions have different paths, zoneinfo can be
    located in /usr/share or such...
   
    Another note!: Red Hat uses a tool called timeconfig, SuSE uses yast
   
To change the CMOS clock and then synchronize the system time with the CMOS
clock, do something like this:
        hwclock --set --date="Feb 25 03:38"                                  
        clock -u -s                                                          
                                                                             
If your clock is set to local time (which is discouraged but if you also run
broken OS's, you must), you can do:
        hwclock --set --date="Feb 25 04:38"                                  
        clock -s                                                             
                                                                             
[Noticed the 1 hour difference ? ;p]

If your computer has Internet-access you can use NTP (Network Time Protocol)
to keep your system clock in sync. One way of doing this is by starting
ntpdate from cron by adding
        05 0 * * * root /usr/sbin/ntpdate -s ntp.belnet.be > /dev/null 2>&1  
                                                                             
to your /etc/crontab. Check the ISP-information below to see if your ISP has
a NTP-server available.
-----------------------------------------------------------------------------

2.4. Locale support

Not much programs support locale yet, if you want to know more about locale
or how to write your own programs to support it, check: [put the damn url
here ;p]

Be aware that locale makes it harder to resolve problems as less people can
help you !! You might understand a problem when it's in technical English,
but what if it's translated in some obscure Dutch ?
-----------------------------------------------------------------------------

2.4.1. Dutch

To enable support for the Dutch locale in Belgium on a system with locale
support you just have to set the following environment variables:
        LANG=nl                                                              
        LANGUAGE=nl_BE                                                       
                                                                             
Try nl_BE.ISO_8859-1 if nl_BE does not work.
-----------------------------------------------------------------------------

2.4.2. French

If you want French locale support in Belgium, set the following environment
variabels:
        LANG=fr                                                              
        LANGUAGE=fr_BE                                                       
                                                                             
Try fr_BE.ISO_8859-1 if fr_BE does not work.
-----------------------------------------------------------------------------

2.4.3. German

If you want instead German locale support in Belgium, set the following
environment variabels:
        LANG=de                                                              
        LANGUAGE=de_BE                                                       
                                                                             
Try de_BE.ISO_8859-1 if de_BE does not work.
-----------------------------------------------------------------------------

2.4.4. Walloon

For Walloon locale support you can find files and information at: [http://
www.linuxi18n.org/locales/walon/] http://www.linuxi18n.org/locales/walon/. To
use it set:
        LANG=wa                                                              
        LANGUAGE=wa_BE:fr_BE                                                 
                                                                             
Try wa_BE.ISO_8859-1 if wa_BE does not work.
-----------------------------------------------------------------------------

2.5. Native language support and codepages

These options add support for the Belgian characterset and codepages. If
you'd like to have these, compile a kernel with these options put on. They
only apply to some filesystems (FAT-based, ISO9660, ...).
        < > Codepage 850 (Europe)                                            
        < > NLS ISO 8859-1  (Latin 1; Western European Languages)            
        < > NLS ISO 8859-15 (Latin 9; Western European Languages with Euro)  
                                                                             
Located in Filesystems > Native Language Support

If your kernel is a modular kernel that came with your distribution (=you
never compiled a kernel before), then you might want to type:
        insmod nls_cp850                                                     
        insmod nls_iso8859_1                                                 
        insmod nls_iso8859_15                                                
                                                                             
-----------------------------------------------------------------------------

3. Setting up Internet (Belgian ISP information)

3.1. Dialing in with your modem (PPP)

To configure PPP correctly, you should check the [http://www.linuxports.com/
howto/ppp/] PPP-HOWTO. I try to explain it briefly, but if you have any
questions or problems, read the HOWTO very carefully.
-----------------------------------------------------------------------------

3.1.1. Configuring the modem

To configure your modem, you can alter the initstring of your modem. To learn
more about your modem, check [http://www.spy.net/~dustin/modem/] Ask Mr.
Modem.

+---------------------------------------------------------------------------+
|                                  Warning                                  |
+---------------------------------------------------------------------------+
|If you have a winmodem you will probably not get it to work. More          |
|information about winmodems is at: [http://linmodems.org/] http://         |
|linmodems.org/. Work is underway, but winmodems are not as good as real    |
|modems.                                                                    |
+---------------------------------------------------------------------------+
-----------------------------------------------------------------------------

3.1.2. Installing pppd

Now, you need to have the ppp-package installed (check this by typing pppd
--version), make sure you have a recent one. Then you have to make sure
you've got these files:

/usr/local/bin/ppp
        #!/bin/sh                                                                                   
        case $1 in                                                                                  
                on|start)                                                                           
                TELEPHONE='555-1212'        # The telephone number for the connection               
                ACCOUNT='your_login'        # The account name for logon (as in 'George Burns')     
                PASSWORD='your_pass'        # The password for this account (and 'Gracie Allen')    
                INITSTRING='AT&F&C1&D2Z'# Modem initstring                                          
                IPLOCAL=0.0.0.0             # Local IP address if known. Dynamic = 0.0.0.0          
                IPREMOTE=0.0.0.0            # Remote IP address if desired. Normally 0.0.0.0        
                DEVICE=/dev/ttyS1           # Serial Device com1=ttyS0, com2=ttyS1,...              
                SPEED=57600                 # 19200, 38400 or 57600 (don't try something different) 
                export TELEPHONE ACCOUNT PASSWORD INITSTRING                                        
                exec /usr/sbin/pppd $DEVICE $SPEED $IPLOCAL:$IPREMOTE \                             
                        user $ACCOUNT connect /etc/ppp/ppp-on-dialer                                
                ;;                                                                                  
                off|stop)                                                                           
                if [ -r /var/run/ppp0.pid ]; then                                                   
                        kill -INT `cat /var/run/ppp0.pid`                                           
                        if [ ! "$?" = "0" ]; then                                                   
                                rm -f /var/run/ppp0.pid                                             
                                echo "ERROR: Removed stale pid file"                                
                                exit 1                                                              
                        fi                                                                          
                        exit 0                                                                      
                fi                                                                                  
                echo "ERROR: PPP link is not active on ppp0"                                        
                exit 1                                                                              
                ;;                                                                                  
                info|status)                                                                        
                /usr/sbin/pppstats                                                                  
                ;;                                                                                  
                *)                                                                                  
                echo "Usage: ppp on|off|info|start|stop|status";                                    
                ;;                                                                                  
        esac                                                                                        
                                                                                                    

/etc/ppp/ppp-on-dialer
        #!/bin/sh                                                            
        exec /usr/sbin/chat -v                                        \      
                REPORT CONNECTION                                     \      
                REPORT CARRIER                                        \      
                TIMEOUT              10                               \      
                ABORT                '\nBUSY\r'                       \      
                ABORT                '\nNO ANSWER\r'                  \      
                ABORT                '\nNO CARRIER\r'                 \      
                ABORT                '\nNO DIALTONE\r'                \      
                ABORT                '\nRINGING\r\n\r\nRINGING\r'     \      
                ABORT                'Invalid Login'                  \      
                ABORT                'Login incorrect'                \      
                ''                   "\r$INITSTRING\r"                \      
                'OK-+++\c-OK'        'ATH0'                           \      
                TIMEOUT              45                               \      
                OK                   "ATDT$TELEPHONE"                 \      
                CONNECT              '\d\c'                           \      
                ogin:--ogin:         "$ACCOUNT"                       \      
                ord:                 "$PASSWORD"                             
                                                                             
You can remove the -v once everything looks normal.

The pppd command uses /etc/ppp/options to list its options, change these
options to whatever fits. These defaults normally work in most cases.
        asyncmap 20a0000                                                     
        crtscts                                                              
        debug                                                                
        default-mru                                                          
        defaultroute                                                         
        detach                                                               
        escape 11,13,ff                                                      
        hide-password                                                        
        ipcp-accept-local                                                    
        ipcp-accept-remote                                                   
        lcp-echo-failure 4                                                   
        lcp-echo-interval 400                                                
        lock                                                                 
        modem                                                                
        mtu 1500                                                             
        netmask 255.255.255.0                                                
        noipdefault                                                          
        passive                                                              
                                                                             
        #idle 300                                                            
        #kdebug 0                                                            
        #-vj                                                                 
                                                                             
Once dialing in works like a charm, you can leave debug out.

+---------------------------------------------------------------------------+
|                                  Warning                                  |
+---------------------------------------------------------------------------+
|It is important to emphasize that every special character, thus every      |
|character that is not [a-ZA-Z0-9] and '_', should be escaped by preceding  |
|it with a '\'-character. Thus "e!b$l+" would become "e\!b\$l\+". Try it if |
|you are having troubles !                                                  |
+---------------------------------------------------------------------------+
-----------------------------------------------------------------------------

3.1.3. pap-secrets / chap-secrets

If your ISP requires CHAP or PAP, you need one of these files with their
proper username and password:

/etc/ppp/pap-secrets or /etc/ppp/chap-secrets
        #client         server  secret          IP                           
        your_login      *       your_pass       *                            
                                                                             
-----------------------------------------------------------------------------

3.1.4. Network

To configure your nameservers, change /etc/resolv.conf. If dialing in is
succesful, but you can't get it to connect to URL's: this is probably the
cause.
        domain domain_of_your_isp                                            
        nameserver your_primary_nameserver                                   
        nameserver your_secondary_nameserver                                 
                                                                             
-----------------------------------------------------------------------------

3.1.5. File permissions

Before you can run a (shell)script, it must be set executable. Be sure that
you set the permissions so that other users cannot see the passwords stored
in the files. If you want other users to be able to dial in, you might want
to consider using sudo. You might want to do the following:
     chmod u+rw og-rwx -R /etc/ppp                                           
     chmod u+x /etc/ppp/ppp-on-dialer /usr/local/bin/ppp                     
                                                                             
-----------------------------------------------------------------------------

3.1.6. Dial + Hangup

Then if /usr/local/bin is in your PATH, you can easily dial in with:
        ppp on                                                               
                                                                             
and hangup with:
        ppp off                                                              
                                                                             
and to get some statistics, you do:
        ppp status                                                           
                                                                             
-----------------------------------------------------------------------------

3.1.7. ISP-dependant information

3.1.7.1. Cable&Wireless (Online, TijdNet)

Authentication
    text-based / PAP
   
Extra options
    noccp
   
Nameservers
    62.112.0.7, 194.88.127.7
   
NTP-server
    ntp.antw.online.be, ntp.brus.online.be, ntp.gent.online.be
   
Web
    [http://www.online.be/] http://www.online.be/
   
Support
    no official Linux support yet
   

-----------------------------------------------------------------------------
3.1.7.2. KPN Belgium (Eunet)

Authentication
    text-based
   
Extra options
    proxyarp
   
Nameservers
    193.74.208.135, 193.74.208.65, 193.121.171.135
   
Web
    [http://www.eunet.be/] http://www.eunet.be/
   
Support
    [http://support.eunet.be/] http://support.eunet.be/
   

-----------------------------------------------------------------------------
3.1.7.3. Planet Internet (Ping)

Authentication
    CHAP
   
Nameservers
    194.119.232.3, 194.119.232.2
   
NTP-server
    ntp.pi.be
   
Web
    [http://www.planetinternet.be/] http://www.planetinternet.be/
   
Support
    [http://www.ping.be/Support/redhat.shtml] http://www.ping.be/Support/
    redhat.shtml (Ping)
   

-----------------------------------------------------------------------------
3.1.7.4. Skynet (Belgacom)

Authentication
    PAP
   
Extra options
    defaultroute
   
Nameservers
    195.238.2.21, 195.238.2.22
   
NTP-server
    ntp.skynet.be
   
Web
    [http://www.skynet.be/] http://www.skynet.be/
   
Support
    [http://help.skynet.be/linux/indexen.html] http://help.skynet.be/linux/
    indexen.html
   

-----------------------------------------------------------------------------
3.1.7.5. Tiscalinet (Freegates, FreeBel)

Authentication
    text-based ?
   
Nameservers
    212.35.2.1, 212.35.2.2
   
NTP-server
    ntp.tiscalinet.be
   
Web
    [http://www.tiscalinet.be/] http://www.tiscalinet.be/
   
Support
    no official Linux support yet
   

-----------------------------------------------------------------------------
3.1.7.6. UUNet (VT4)

Authentication
    PAP
   
Nameservers
    194.7.1.4, 194.7.15.70
   
Web
    [http://www.uunet.be/] http://www.uunet.be/, [http://www.vt4.net/] http:/
    /www.vt4.net/
   
Support
    no official support yet
   

-----------------------------------------------------------------------------
3.1.7.7. Wanadoo (Euronet)

Authentication
    text-based / PAP
   
Nameservers
    195.74.193.12, 194.134.0.12
   
Web
    [http://www.wanadoo.be/] http://www.wanadoo.be/
   
Support
    no official Linux support yet
   

-----------------------------------------------------------------------------
3.1.7.8. World Online

Authentication
    CHAP
   
Nameservers
    212.233.1.34, 212.233.2.34
   
Web
    [http://www.worldonline.be/] http://www.worldonline.be/
   
Support
    [http://help.worldonline.be/en/linux/index.htm] http://
    help.worldonline.be/en/linux/index.htm
   

-----------------------------------------------------------------------------
3.1.7.9. XS4ALL

Authentication
    PAP
   
Nameservers
    194.109.6.66, 194.109.9.99
   
NTP-server
    ntp.xs4all.be
   
Web
    [http://www.xs4all.be/] http://www.xs4all.be/
   
Support
    [http://helpdesk.xs4all.be/ned/linux/index.html] http://
    helpdesk.xs4all.be/ned/linux/index.html
   

-----------------------------------------------------------------------------
3.1.7.10. Yucom (DMA)

Authentication
    CHAP
   
Nameservers
    212.8.180.122, 212.8.180.126
   
NTP-server
    ntp.yucom.be
   
Web
    [http://www.yucom.be/] http://www.yucom.be/
   
Support
    no official Linux support yet
   

-----------------------------------------------------------------------------
3.2. Dialing in with your ISDN-modem

Contributed by Christophe Lambin <clambin@skynet.be>

This section does not aim to be a definitive guide on ISDN for Linux. For a
more detailed discussion on the topic, see [http://www.wurtel.demon.nl/] Paul
Slootman's ISDN4Linux HOWTO and [http://www.isdn4linux.de/faq/]
ISDN4Linux-FAQ.
-----------------------------------------------------------------------------

3.2.1. Updating the kernel

If you're using a 2.2 kernel, it's recommended to get an updated version of
the ISDN code. You can retrieve it from CVS at [ftp://ftp.suse.com/pub/
isdn4linux/] ftp://ftp.suse.com/pub/isdn4linux/. For more information, check:
[http://www.brisse.dk/site/linux/docs/isdn.htm] http://www.brisse.dk/site/
linux/docs/isdn.htm

+---------------------------------------------------------------------------+
|                                  Warning                                  |
+---------------------------------------------------------------------------+
|If you've recently purchased an Eicon Diva 2.0 PCI (eg, via Belgacom),     |
|there's a good chance you've actually got a Diva 2.01.In this case, you    |
|must get a version dated 1 July 1999 or later !                            |
+---------------------------------------------------------------------------+

Once the ISDN is in place, you can start up the driver. Eg: modprobe hisax
type=11 protocol=2 Refer to the Readme's for the right parameters and values
for your card.
-----------------------------------------------------------------------------

3.2.2. ISDN4Linux toolkit

Next, you'll need the ISDN4Linux toolkit. You can retrieve the latest version
of the toolkit at: [ftp://ftp.suse.com/pub/isdn4linux/] ftp://ftp.suse.com/
pub/isdn4linux/
-----------------------------------------------------------------------------

3.2.3. Configuring the interface

With the tools installed and configured, write a script to configure the
interface, to be used for the ISDN connection. As always in Linux, there's no
one correct way of doing this. I've put these in a script

/etc/rc.d/rc.isdn:
        #!/bin/sh                                                            
        MSNREMOTE='555-1212'    # Phone number of ISP                        
        MSNLOCAL='555-1313'     # my number, without 0, with areacode        
        ACCOUNT='george'        # The account for logon (as 'George Burns')  
        IPLOCAL=10.0.0.2        # my fixed IP (use 10.0.0.2 if no fixed)     
        IPREMOTE=0.0.0.0        # IP number of ISP                           
        INTERFACE=ippp0                                                      
        /sbin/modprobe hisax type=11 protocol=2                              
        /sbin/isdnctrl verbose 3 system on                                   
        /sbin/isdnctrl addif $IF                                             
        /sbin/isdnctrl secure $IF on                                         
        /sbin/isdnctrl addphone $IF out $MSNREMOTE                           
        /sbin/isdnctrl eaz $IF $MSNLOCAL                                     
        /sbin/isdnctrl huptimeout $IF 300                                    
        /sbin/isdnctrl l2_prot $IF hdlc                                      
        /sbin/isdnctrl l3_prot $IF trans                                     
        /sbin/isdnctrl encap $IF syncppp                                     
#        /sbin/isdnctrl dialmode $IF auto                                    
        /sbin/ifconfig $IF $IPLOCAL pointopoint $IPREMOTE -arp -broadcast    
        /sbin/ipppd /dev/ippp0 user $ACCOUNT $IPLOCAL:$IPREMOTE              
                                                                             

To start this at boot time, make it executable and append the following to /
etc/rc.d/rc.local:
        if [ -x /etc/rc.d/rc.isdn ]; then                                    
                . /etc/rc.d/rc.isdn                                          
        fi                                                                   
                                                                             

The ipppd command gets its parameters passed through a file, /etc/ppp/
ioptions:
        -ac                                                                  
        -bsdcomp                                                             
        debug                                                                
        defaultroute                                                         
        ipcp-accept-local                                                    
        ipcp-accept-remote                                                   
        mru 1524                                                             
        mtu 1500                                                             
        noipdefault                                                          
        -pc                                                                  
        useifip                                                              
        -vj                                                                  
        -vjccomp                                                             
                                                                             
        #idle 360                                                            
        #persistent                                                          
                                                                             

+---------------------------------------------------------------------------+
|                                  Warning                                  |
+---------------------------------------------------------------------------+
|Do NOT specify +pap or +chap in this file. This specifies the              |
|authentication that ipppd should use for an INCOMING client. If you were to|
|use this to connect to your ISP, ipppd would wait for the ISP to           |
|authenticate itself using the specified protocol.                          |
+---------------------------------------------------------------------------+

+---------------------------------------------------------------------------+
|                                  Warning                                  |
+---------------------------------------------------------------------------+
|It is important to emphasize that every special character, thus every      |
|character that is not [a-ZA-Z0-9] and '_' should be escaped by preceding it|
|with a '\'-character. Thus 'e!b$l+' would become 'e\!b\$l\+'. Try it if you|
|are having troubles !                                                      |
+---------------------------------------------------------------------------+

Finally, create /etc/ppp/ip-down.local to handle the shutdown of the
interface:
        #!/bin/sh                                                            
        /sbin/ifconfig $1 down                                               
        sleep 1                                                              
        /sbin/ifconfig $1 10.0.0.2 pointopoint                               
                                                                             

   
    Note!: This is to handle some problems with routes on shutdowns. Anyone
    know of a clean(er) solution ?
   
-----------------------------------------------------------------------------
3.2.4. pap-secrets / chap-secrets

If your ISP uses PAP or CHAP, create a file /etc/ppp/pap-secrets or /etc/ppp/
chap-secrets. Its format is:
        #client         server  secret          IP                           
        your_login      *       your_pass       *                            
                                                                             
-----------------------------------------------------------------------------

3.2.5. Network

Not really related to ISDN, but a lot of people forget this step (too eager
to try out all the stuff they typed in above ? :-)).

Anyway, you need to configure the DNS, by creating a file /etc/resolv.conf:
        domain your_domain_of_your_isp                                       
        nameserver your_primary_nameserver                                   
        nameserver your_secondary_nameserver                                 
                                                                             
-----------------------------------------------------------------------------

3.2.6. File permissions

Before you can run a (shell)script, it must be set executable. Be sure that
you set the permissions so that other users cannot see the passwords stored
in the files. If you want other users to be able to dial in, you might want
to consider using sudo. You might want to do the following:
     chmod u+rw og-rwx -r /etc/ppp                                           
     chmod u+x /etc/rc.d/rc.isdn /etc/ppp/ip.down-local /usr/local/bin/isdn  
                                                                             
-----------------------------------------------------------------------------

3.2.7. Dial + Hangup

Finally, you can write a little wrapper to start and stop the ISDN
connection. I've put this as /usr/local/bin/isdn:
        #!/bin/bash                                                          
        case $1 in                                                           
                on|start)                                                    
                /sbin/isdnctrl dial ippp0                                    
                ;;                                                           
                off|stop)                                                    
                /sbin/isdnctrl hangup ippp0                                  
                ;;                                                           
                info|status)                                                 
                /sbin/isdnctrl list ippp0                                    
                ;;                                                           
                *)                                                           
                echo "Usage: isdn on|off|info|start|stop|status"             
                ;;                                                           
        esac                                                                 
                                                                             

Then if /usr/local/bin is in your PATH, you can easily dial in with isdn on
and hangup with isdn off.
-----------------------------------------------------------------------------

3.3. Cablemodem (DHCP)

DHCP was designed to make life easier, and most of the times it does ;) More
information to set up your DHCP client can be found at: [http://www.oswg.org/
oswg-nightly/DHCP.html] http://www.oswg.org/oswg-nightly/DHCP.html and a
[http://www.dhcp-handbook.com/dhcp_faq.html] list of Frequently Asked
Questions from the infamous document of John Wobus at [http://www.dhcp.org/]
http://www.dhcp.org/ which describes everything you need to know. Along with
the information in the Cable-Modem HOWTO ([http://www.oswg.org/oswg-nightly/
Cable-Modem.html] http://www.oswg.org/oswg-nightly/Cable-Modem.html).

Lots of people want to connect a whole network to their cablemodem, that's
not a problem. You'll need [http://www.linuxdoc.org/HOWTO/
IP-Masquerade-HOWTO.html] IP-Masquerading and make sure the interface (that
speaks to the cablemodem) has the right MAC-address !! Another solution (in
case of problems) is to reset your cablemodem.
-----------------------------------------------------------------------------

3.3.1. UPC Belgium (Chello, TVD)

NTP-server
    time.chello.be
   
Web
    [http://www.upcbelgium.be/] http://www.upcbelgium.be/
   
Support
    no official support yet
   
More information
    [http://foobar.starlab.net/~soggie/tvd_linux/] http://foobar.starlab.net/
    ~soggie/tvd_linux/
   

-----------------------------------------------------------------------------
3.3.2. Pandora (Telenet)

Automatic proxy
    http://pac.pandora.be:8080
   
HTTP proxy
    export http_proxy="http://proxy.pandora.be:8080/"
   
NTP-server
    ntp.pandora.be
   
Web
    [http://www.pandora.be/] http://www.pandora.be/
   
Support
    no official support yet
   
More information
    [http://users.pandora.be/de.boeve/pandora.html] http://users.pandora.be/
    de.boeve/pandora.html
   

-----------------------------------------------------------------------------
3.4. ADSL

3.4.1. Easynet

Web
    [http://www.easynet.be/] http://www.easynet.be/
   
Support
    [http://support.easynet.be/] http://support.easynet.be/
   

-----------------------------------------------------------------------------
3.4.2. KPN Belgium (Eunet)

Web
    [http://www.eudsl.be/] http://www.eudsl.be/
   
Support
    [http://support.eunet.be/] http://support.eunet.be/
   

-----------------------------------------------------------------------------
3.4.3. Turboline (Belgacom)

Web
    [http://www.turboline.be/] http://www.turboline.be/
   
Support
    no official support yet
   
More information
    [http://foobar.starlab.net/~soggie/turboline/] http://foobar.starlab.net/
    ~soggie/turboline/, [http://minf.vub.ac.be/~fquestie/turbo/] http://
    minf.vub.ac.be/~fquestie/turbo/ and [http://minf.vub.ac.be/~fquestie/
    turbo/] http://minf.vub.ac.be/~fquestie/turbo/
   

-----------------------------------------------------------------------------
4. Belgian Linux user groups

More information can be found in the [http://www.linuxdoc.org/HOWTO/
User-Group-HOWTO.html] User Group HOWTO A complete list of Linux User Groups
is at: [http://www.ssc.com/linux/glue/] http://www.ssc.com/linux/glue/ and
at: [http://limestone.uoregon.edu/woven/lugww/] http://limestone.uoregon.edu/
woven/lugww/
-----------------------------------------------------------------------------

4.1. ALLIN Linux User Group

Address
    Mechelbaan 260
    B-3130Begijnendijk
    
   
Email
    <allin@linuxfreak.com>
   
Web
    [http://come.to/allin/] http://come.to/allin/
   
Contact
    Paul Terweduwe <paul@faes.be>
   

-----------------------------------------------------------------------------
4.2. Antwerp Linux User Group (ALUG)

Address
    Van Luppenstraat 70
    B-2018Antwerp
    
   
Phone
    +32 (0)3 218 63 54
   
Email
    <alug@pandora.be>
   
Web
    [http://sunsite.belnet.be/alug/] http://sunsite.belnet.be/alug/
   
Meetings
    In [http://sunsite.belnet.be/alug/road-description.html] ACCB (HVR),
    Herentalsebaan 212 te Deurne
   
Contact
    Armand Verachtert <alug@pandora.be>
   

-----------------------------------------------------------------------------
4.3. Brussels Linux User Group (BeLUGa)

Address
    BuildingF,room218
    VrijeUniversiteitBrussel
    Pleinlaan 2
    B-1050Brussel
    
   
Email
    <info@linux.rave.org>
   
Web
    [http://linux.rave.org/] http://linux.rave.org/
   
Mailinglist
    [http://linux.rave.org/mlist.html] http://linux.rave.org/mlist.html
   

-----------------------------------------------------------------------------
4.4. Computer Forum KaHo (CFK)

Email
    <cfk@kahosl.be>
   
Web
    [http://eduserv.kahosl.be/cfk/] http://eduserv.kahosl.be/cfk/
   

-----------------------------------------------------------------------------
4.5. HCC Limburgse Linux Gebruikers Groep (HLLGG)

Email
    <Linuxgg@hotmail.com>
   
Web
    [http://www.uunet.be/hcc/Limburg/] http://www.uunet.be/hcc/Limburg/
   
Contact
    Andy Peeters & Bruno Tony
   

-----------------------------------------------------------------------------
4.6. HCC Linux Gebruikers Groep Leuven

Address
    Diegemstraat 61
    B-1930Zaventem
    
   
Email
    <Yvo.Dries@village.uunet.be>
   
Web
    [http://www.uunet.be/hcc/Leuven/linux.html] http://www.uunet.be/hcc/
    Leuven/linux.html
   
Contact
    Yvo Dries <Yvo.Dries@village.uunet.be>
   

-----------------------------------------------------------------------------
4.7. Independent Group of Unix-Alikes and Network Activists (IGUANA)

Address
    Milcampslaan 101
    B-1040Schaarbeek
    
   
Phone
    +32 (0)2 582 66 50
   
Fax
    +32 (0)2 582 66 50
   
Email
    <info@iguana.be>
   
Web
    [http://www.iguana.be/] http://www.iguana.be/
   

-----------------------------------------------------------------------------
4.8. Infogroep (IGWE)

Address
    5F218(buildingF)
    Pleinlaan 2
    B-1050Brussels
    
   
Phone
    +32 (0)2 629 33 56
   
Fax
    +32 (0)2 629 33 89
   
Email
    <ig@igwe.vub.ac.be>
   
Web
    [http://igwe.vub.ac.be/] http://igwe.vub.ac.be/
   

-----------------------------------------------------------------------------
4.9. Leuvense Linux Users (L2U)

Email
    <info@l2u.iguana.be>
   
Web
    [http://l2u.iguana.be/] http://l2u.iguana.be/
   
Meetings
    First wednesday every month in [http://l2u.iguana.be/where.php]
    Freinetschool De Zevensprong, Vital Decosterstraat 67, B-3000 Leuven
   
Mailinglist
    [http://l2u.iguana.be/mailman/listinfo/members] http://l2u.iguana.be/
    mailman/listinfo/members
   

-----------------------------------------------------------------------------
4.10. Limburgse Linux User Group (LILUG)

Email
    <frank.eersels@wanadoo.be>
   
Web
    [http://lilug.linuxatwork.at/] http://lilug.linuxatwork.at/
   
Mailinglist
    [http://www.onelist.com/isregistered.cgi?listname=lilug] http://
    www.onelist.com/isregistered.cgi?listname=lilug
   
Contact
    Frank Eersels <frank.eersels@wanadoo.be>
   

-----------------------------------------------------------------------------
4.11. Linux User Group De Bruxelles (BxLUG)

Email
    <information@bxlug.org>
   
Web
    [http://www.bxlug.org/] http://www.bxlug.org/
   
Contact
    Raphael Bauduin <information@bxlug.org>
   

-----------------------------------------------------------------------------
4.12. Linux User Group De Charleroi

Email
    <lug_charleroi@caramail.com>
   
Web
    [http://charleroi.linuxbe.org/] http://charleroi.linuxbe.org/
   

-----------------------------------------------------------------------------
4.13. Linux User Group De Lige

Email
    <liege@linuxbe.org>
   
Web
    [http://liege.linuxbe.org/] http://liege.linuxbe.org/
   

-----------------------------------------------------------------------------
4.14. Linux User Group De Namur

Email
    <info@namurlug.org>
   
Web
    [http://namurlug.org/] http://namurlug.org/
   

-----------------------------------------------------------------------------
4.15. Linux User Group Heist op den Berg

Address
    Bergstraat 89
    B-2220Heist op den Berg
    
   
Phone
    +32 (0)495 925 931
   
Email
    <info_heistselinuxclub@yahoo.co.uk>
   
Web
    [http://uk.geocities.com/info_heistselinuxclub/] http://uk.geocities.com/
    info_heistselinuxclub/
   

-----------------------------------------------------------------------------
4.16. Linux User Group Mons

Web
    [http://mons.linuxbe.org/] http://mons.linuxbe.org/
   

-----------------------------------------------------------------------------
4.17. Linux User Movement Underground Mad Belgian Aliens (LUMUMBA)

Address
    FiliiLamberti
    Universiteitslaan 1
    B-3590Diepenbeek
    
   
Email
    <helpdesk@lumumba.luc.ac.be>
   
Web
    [http://lumumba.luc.ac.be/] http://lumumba.luc.ac.be/
   
Mailinglist
    <minordomo@lumumba.luc.ac.be>
   

-----------------------------------------------------------------------------
4.18. LinuxBe.Org A.S.B.L

Address
    Boulevard de la Meuse, 23
    B-5100Jambes
    
   
Email
    <team@linuxbe.org>
   
Web
    [http://linuxbe.org/] http://linuxbe.org/
   
Contact
    Cedric Gavage <niddle@linuxbe.org>
   

-----------------------------------------------------------------------------
4.19. Louvain-Li-nux (LLN)

Address
    Louvain-la-neuveLinuxUserGroup
    Place des paniers 5/014
    B-1348Louvain-La-neuve
    
   
Phone
    +32 (0)10 454 761
   
Email
    <lln@udev.org>
   
Web
    [http://lln.udev.org/] http://lln.udev.org/
   
Contact
    Benjamin Henrion <benjamin.henrion@linuxbe.org>
   

-----------------------------------------------------------------------------
4.20. Open Technology Assembly Linux Special Interest Group

Address
    Kruipstraat 14
    B-1850Grimbergen
    
   
Phone
    +32 (0)11 275 898
   
Fax
    +32 (0)11 270 389
   
Email
    <info@ota.be>
   
Web
    [http://www.ota.be/] http://www.ota.be/
   
Contact
    Jan Vanhercke <jan.vanhercke@c-cure.be>
   

-----------------------------------------------------------------------------
4.21. PC Aktief Computerclub

Address
    PCAktiefComputerclub
    
   
Web
    [http://www.pcaktief.be/] http://www.pcaktief.be/
   
Meetings
    Fourth tuesday every month in 't Hoveken van Belsele, Nieuwe Baan 130,
    B-9111 Belsele (Sint-Niklaas)
   
Contact
    Johan De Baere <debaerej@hotmail.com>
   

-----------------------------------------------------------------------------
4.22. Python Blanc Blue Belge (P3B)

Address
    PythonBlancBlueBelge(P3B)
    
   
Web
    [http://www.p3b.org/] http://www.p3b.org/
   

-----------------------------------------------------------------------------
4.23. Student Information Networking (SIN)

Address
    Kleinhoefstraat 4
    B-2440Geel
    
   
Email
    <sin@sin.khk.be>
   
Web
    [http://www.sin.khk.be/] http://www.sin.khk.be/
   

-----------------------------------------------------------------------------
4.24. TINA

Contact
    Tina gebruikers <vraagtina@digibel.org>
   
Web
    [http://tina.kangaroot.net/] http://tina.kangaroot.net/
   
Meetings
    [http://tina.kangaroot.net/meetings/meetings.html] Hof van Rieth,
    Molenlei 68, B-2640 Mortsel
   
Mailinglist
    <mailinglist@tina.kangaroot.net>
   

-----------------------------------------------------------------------------
4.25. Unix Lovers Yield Student Services & Internet Support (ULYSSIS)

Address
    Holleberg
    Schapenstraat 37, lokaal 91 97
    B-3000Leuven
    
   
Email
    <ulyssis@ulyssis.org>
   
Web
    [http://www.ulyssis.org/] http://www.ulyssis.org/
   

-----------------------------------------------------------------------------
4.26. West-Vlaamse Linux User Group (Lug-WV)

Contact
    Thibaut Fernagut <blokkie@tiscalinet.be>
   
Web
    [http://www.lugwv.be/] http://www.lugwv.be/
   

-----------------------------------------------------------------------------
4.27. Zeus WPI - Werkgroep Informatica RUG

Address
    Krijgslaan 281 S9
    B-9000Gent
    
   
Phone
    +32 (0)9 264 47 51
   
Email
    <info@zeus.rug.ac.be>
   
Web
    [http://www.zeus.rug.ac.be/] http://www.zeus.rug.ac.be/
   
Comment
    Restricted to RUG students
   

-----------------------------------------------------------------------------
5. Belgian Linux businesses

The Linux Documentation Project contains worldwide lists of Linux businesses,
Linux Consultants HOWTO and V.A.R. HOWTO, and can be found at: [http://
www.linuxports.com/] http://www.linuxports.com/.
-----------------------------------------------------------------------------

5.1. aDOC Services

Address
    Avenue du Pesage, 31-33
    B-1050Brussels
    
   
Phone
    +32 (0)2 646 00 76
   
Email
    <sales@adoc-services.com>
   
Web
    [http://www.adoc-services.com/] http://www.adoc-services.com/
   

-----------------------------------------------------------------------------
5.2. Arafox

Address
    Avenue Joseph Wybranlaan 40
    B-1070Brussels
    
   
Phone
    +32 (0)2 529 59 91
   
Fax
    +32 (0)2 529 59 92
   
Email
    <info@arafox.com>
   
Web
    [http://www.arafox.com/] http://www.arafox.com/
   

-----------------------------------------------------------------------------
5.3. Aragne

Email
    <contact@aragne.com>
   
Web
    [http://www.aragne.com/] http://www.aragne.com/
   

-----------------------------------------------------------------------------
5.4. Better Access N.V.

Address
    Geldenaakse Vest 6
    B-3000Leuven
    
   
Phone
    +32 (0)16 298 045
   
Fax
    +32 (0)16 298 046
   
Email
    <info@ba.be>
   
Web
    [http://www.ba.be/] http://www.ba.be/
   
Type of support
    After an onsite installation, we mainly support our customers with SSH
    remote administration. Most problems are reported by E-mail or by the
    inhouse-developped webbased supportsystem. This doesn't mean that once in
    a while a supportcall comes in.
   
Special expertise
    Security, systemadministration and setups, security (firewalling,
    tigerteaming, VPN, etc.) Networkdesign, wireless networking,
    Troubleshooting, product development, etc. Please visit http://www.ba.be
    for more info.
   

-----------------------------------------------------------------------------
5.5. BIOS Consulting sa/nv

Address
    Che de Neerstalle 240
    B-1190Bruxelles
    
   
Phone
    +32 (0)2 376 61 97
   
Fax
    +32 (0)2 376 23 99
   
Email
    <info@biosconsulting.com>
   
Web
    [http://www.biosconsulting.com/] http://www.biosconsulting.com/
   

-----------------------------------------------------------------------------
5.6. CSS N.V.

Address
    Henneaulaan 366
    B-1930Zaventem
    
   
Phone
    +32 (0)2 718 53 33
   
Fax
    +32 (0)706 53 306
   
Type of support
    support on networking, installation, hardware maintenance, Red Hat
    certified reseller
   
Special expertise
    Red Hat RHCE
   

-----------------------------------------------------------------------------
5.7. D. Connect

Address
    Av. Van Goidtsnoven 33
    B-1180Uccle
    
   
Email
    <webmaster@dconnect.be>
   
Web
    [http://www.dconnect.be/] http://www.dconnect.be/
   

-----------------------------------------------------------------------------
5.8. Double Barrel Consultancy and Productions

Address
    Sportstraat 28
    B-9000Gent
    
   
Phone
    +32 (0)9 222 77 64
   
Fax
    +32 (0)9 222 49 76
   
Email
    <mvergall@double-barrel.be>
   
Web
    [http://www.double-barrel.be/] http://www.double-barrel.be/
   
Contact
    Michael C. Vergallen <mvergall@double-barrel.be>
   
Type of support
    phone, email remote network admin, inhouse, onsite.
   
Special expertise
    installation, system admin. internet and intranet connectivity, sendmail,
    firewalls, proxys, nameservers, troubleshooting software & hardware.
   

-----------------------------------------------------------------------------
5.9. Grmbl productions

Address
    Korte Vuldersstraat 30
    B-8000Brugge
    
   
Phone
    +32 (0)50 674 512
   
Fax
    +32 (0)50 342 623
   
Email
    <info@grmbl.com>
   
Web
    [http://www.grmbl.com/] http://www.grmbl.com/
   

-----------------------------------------------------------------------------
5.10. IBM Belgium SA/NV

Address
    Square Victoria Regina 1
    B-1210Brussels
    
   
Phone
    +32 (0)2 225 33 33
   
Fax
    +32 (0)2 225 24 73
   
Email
    <blueline@be.ibm.com>
   
Web
    [http://www.ibm.com/be/] http://www.ibm.com/be/
   
Contact
    Sam Versluys <sam_versluys@be.ibm.com>
   

-----------------------------------------------------------------------------
5.11. IP Net generation

Address
    Cyriel Verschaevelaan 12
    B-2980Zoersel
    
   
Phone
    +32 (0)477 513 987
   
Email
    <info@ipng.be>
   
Web
    [http://www.ipng.be/] http://www.ipng.be/
   
Special expertise
    IPnG focuses on Open Source software development.
   

-----------------------------------------------------------------------------
5.12. Kangaroot Linux Consultancy

Address
    Leeuwerikstraat 14
    B-2018Antwerp
    
   
Phone
    +32 (0)3 290 81 13
   
Fax
    +32 (0)3 290 81 13
   
Email
    <info@kangaroot.net>
   
Web
    [http://www.kangaroot.net/] http://www.kangaroot.net/
   
Contact
    Peter Dens <peter@kangaroot.net>
   

-----------------------------------------------------------------------------
5.13. Mind Linux Solutions

Address
    Vaartkom 11
    B-3000Leuven
    
   
Phone
    +32 (0)478 274 069
   
Fax
    +32 (0)16 309 644
   
Email
    <info@mind.be>
   
Web
    [http://mind.be/] http://mind.be/
   
Contact
    Peter Vandenabeele <peter@mind.be>
   
Type of support
    Installation & configuration, auditing & consultancy, support &
    maintenance, training & education, research & development.
   
Special expertise
    We are specialised in installing Linux servers for various purposes
    (Web-, File-, Print- or Mailservers, Routers, Firewalls, VPN, ...) in
    heterogenous networks. We provide support and training for Linux and Open
    Source products and we develop custom Linux solutions for our customers.
   

-----------------------------------------------------------------------------
5.14. Phidani Software SPRL

Address
    Rue de l'autonomie 1
    B-1070Brussels
    
   
Email
    <info@phidani.be>
   
Phone
    +32 (0)2 552 06 63
   
Fax
    +32 (0)2 522 09 30
   
Web
    [http://www.phidani.be/] http://www.phidani.be/
   

-----------------------------------------------------------------------------
5.15. Spier BVBA

Address
    Knaptandstraat 96-98
    B-9100Sint-Niklaas
    
   
Email
    <info@spier.be>
   
Phone
    +32 (0)3 765 90 61
   
Fax
    +32 (0)3 765 90 62
   
Web
    [http://www.spier.be/] http://www.spier.be/
   

-----------------------------------------------------------------------------
5.16. Stone-IT Belgium

Address
    MinervaOfficeBrussels
    Minervastraat 14b
    B-1930Zaventem
    
   
Email
    <info@be.stone-it.com>
   
Phone
    +32 (0)2 720 88 35
   
Fax
    +32 (0)2 720 51 71
   
Web
    [http://www.be.stone-it.com/] http://www.be.stone-it.com/
   
Contact
    Martijn Smit <smit@stone-it.com>
   
Type of support
    Stone-IT is a 'one-stop' Linux provider for integrating business
    environments in which we offer: Linux Consulting, Linux Solutions, Linux
    Support and Linux Education.
   
Special expertise
    Stone-IT offers high quality Linux expertise and can develop, test and
    implement Linux in several different business environments such as all
    kinds of servers (File-/Web-/Name-/Mail-/Print servers), as well as
    Clustering, VPN, Storage, Firewalls & Routers. Our support consists of
    Pro Active Monitoring, 24 hours a day, 7 days a week. Besides having
    trainers being a Red Hat Certified Engineer we offer Distribution
    Independent Education.
   

-----------------------------------------------------------------------------
5.17. VA Linux Belgium

Address
    GreenhillCampus
    Interleuvenlaan 15A
    B-3001Haasrode
    
   
Phone
    +32 (0)16 208 961
   
Fax
    +32 (0)16 207 973
   
Email
    <egoven@valinux.com>
   
Web
    [http://www.valinux.com/] http://www.valinux.com/
   
Contact
    Erik Goven <egoven@valinux.com>
   

-----------------------------------------------------------------------------
5.18. VirgoPlus sprl

Address
    Rue E. Solvay 29 A
    B-4000Lige
    
   
Phone
    +32 (0)4 253 00 59
   
Fax
    +32 (0)4 253 00 49
   
Email
    <staff@virgoplus.com>
   
Web
    [http://www.virgoplus.com/] http://www.virgoplus.com/
   
Contact
    Bruno Mairlot <bruno@virgoplus.com>
   
Type of support
    By phone, email, or remote networked administration, inhouse, onsite
   
Special expertise
    Installation, configuration, administration of Linux, internet
    connection, intranet developpment, firewalls, samba, netatalk, firewalls,
    proxys, DNS, web server (Apache), mod_perl, MySQL, Gui interface
    developpment (GTK+). We have acquired a special expertise with the Red
    Hat distributions.
   

-----------------------------------------------------------------------------
6. Belgian Linux resources

6.1. Websites

6.1.1. Linux in Belgium

*[http://linbel.iguana.be/] Linux in Belgium
   
*[http://dag.wieers.com/howto/Belgian-HOWTO.html] Belgian HOWTO
   
*[http://users.pandora.be/wouter.verhelst/FAQ] be.comp.os.linux FAQ
   
*[http://www.linuxbelgium.net/] LinuxBelgium.net
   

-----------------------------------------------------------------------------
6.1.2. Dutch Linux-sites

*[http://nl.linux.org/] Nederlandse Linux homepage
   
*[http://nl.linux.org/doc/] Nederlandstalige Linux Documentatie Project
   
*[http://www.linux-nl.cx/] Linux Support Website
   
*[http://www.mech.kuleuven.ac.be/%7Ebruyninc/etos/] EToS: Educatieve
    Toepassingen van Open Software
   
*[http://user.online.be/~koendb/linux_beginners.html] Beginnen met Linux
   
*[http://user.online.be/~koendb/redhat.html] Installatie Handleiding
    RedHat 5.2
   
*[http://users.pandora.be/wouter.verhelst/configure.html] Configure.help
    in het Nederlands
   
*[http://inf-beheer.sourceforge.net/] Cursus Linux voor Informaticabeheer
   

-----------------------------------------------------------------------------
6.1.3. French Linux-sites

*[http://linuxbe.org/] LinuxBe.Org
   
*[http://club.euronet.be/dany.vanderroost/howto.html] Belgian HOWTO in
    french
   
*[http://www.linux-france.org/] linux-france.org
   

-----------------------------------------------------------------------------
6.1.4. Mirrors in Belgium

*[http://be.eu.mirrors.freshmeat.net/] Freshmeat at UPC Belgium
    (Chello,TVD)
   
*[http://winbe.linuxberg.com/] Linuxberg at Wallonie Internet
   
*[http://online.linuxberg.com/] Linuxberg at Online
   
*[http://pandora.linuxberg.com/] Linuxberg at Pandora (Telenet)
   
*[http://sunsite.belnet.be/alug/ftp_mirrors/linux_gazette/] Linux Gazette
    at Belnet
   
*[http://linuxgazette.linuxbe.org] Linux Gazette at Linuxbe
   
*[http://linuxfocus.linuxbe.org] LinuxFocus
   
*[http://linux-france.linuxbe.org] Linux France
   

-----------------------------------------------------------------------------
6.2. HOWTO

The most important collection of Linux information on the net. Please if you
encounter erroneous information in one of them, do contact the author. Only
that way it will be corrected and we all stand together ;)

*[http://www.linkline.be/LDP/] HOWTO's at LinkLine
   
*[http://www.double-barrel.be/linux_web/LDP/] HOWTO's at Double-Barrel
   
*[http://www.sin.khk.be/mirror/LDP/] HOWTO's at SIN
   
*[http://ldp.linuxbe.org/] HOWTO's at Linuxbe.org
   

-----------------------------------------------------------------------------
6.3. HOWTO translations

As Dutch is less wide-spread, it is the least supported. But work is being
done to resolve this ;) (and maybe *you* can help ?!?) French and German
translations obviously are already taken care of.
-----------------------------------------------------------------------------

6.3.1. Dutch

A succesfull initiative is making progress, but there's still a lot to do. If
you want to help, start translating and send it there. Check [http://
nl.linux.org/doc/HOWTO/] http://nl.linux.org/doc/HOWTO/.
-----------------------------------------------------------------------------

6.3.2. French

French translations of HOWTO's can be found at: [http://www.ibiblio.org/pub/
Linux/docs/HOWTO/translations/fr/] http://www.ibiblio.org/pub/Linux/docs/
HOWTO/translations/fr/
-----------------------------------------------------------------------------

6.3.3. German

German translations of HOWTO's can be found at: [http://www.ibiblio.org/pub/
Linux/docs/HOWTO/translations/de/] http://www.ibiblio.org/pub/Linux/docs/
HOWTO/translations/de/
-----------------------------------------------------------------------------

6.4. FTP

6.4.1. Kernel-source mirrors

*[ftp://ftp1.be.kernel.org/pub/linux/kernel/] Official Mirror
    kernel-sources at Belnet
   
*[ftp://ftp2.be.kernel.org/pub/linux/kernel/] Official Mirror
    kernel-sources at UPC Belgium (Chello,TVD)
   
*[ftp://ftp.tiscalinet.be/pub/linux/kernel/] Kernel-sources at Tiscalinet
   

-----------------------------------------------------------------------------
6.4.2. Distribution mirrors

*[http://www.redhat.com/download/mirror.html] Red Hat Mirrors
   
    +[ftp://ftp.belnet.be/mirror/ftp.redhat.com/] Official Mirror at
        Belnet
       
    +[ftp://ftp.easynet.be/redhat/] Official Mirror at Easynet
       
    +[ftp://mirrors.pandora.be/mirrors/ftp.redhat.com/] Mirror at Pandora
        (Telenet)
       
    +[ftp://ftp.chello.be/mirror/ftp.redhat.com/] Mirror at UPC Belgium
        (Chello,TVD)
       
   
*[http://www.debian.org/misc/README.mirrors] Debian
   
    +[ftp://ftp.belnet.be/mirror/ftp.debian.org/] Official Mirror at
        Belnet
       
    +[ftp://ftp.kulnet.kuleuven.ac.be/pub/mirror/ftp.debian.org/] Official
        Mirror at KULeuven
       
    +[ftp://mirrors.pandora.be/mirrors/ftp.debian.org/] Official Mirror at
        Pandora (Telenet)
       
    +[ftp://ftp.easynet.be/debian/] Official Mirror at Easynet
       
    +[ftp://ftp.tiscalinet.be/debian/] Official Mirror at Tiscalinet
       
    +[ftp://ftp.skynet.be/mirror2/debian-ftp/] Mirror at Skynet
       
    +[ftp://debian.spnet.net/] Mirror at spnet
       
   
*Mandrake
   
    +[ftp://ftp.belnet.be/packages/mandrake/] Mirror at Belnet
       
    +[ftp://ftp.tvd.be/pub/mirror/ftp0.sunet.se/pub/Linux/distributions/
        mandrake/] Mirror at UPC Belgium (Chello,TVD)
       
   
*SuSE
   
    +[ftp://ftp.belnet.be/mirror/ftp.suse.com/] Mirror at Belnet
       
    +[ftp://mirrors.pandora.be/mirrors/ftp.suse.com/] Mirror at Pandora
        (Telenet)
       
   

-----------------------------------------------------------------------------
6.4.3. Mirrors in Belgium

*[ftp://ftp.belnet.be/mirror/] Mirrors at Belnet
   
*[ftp://ftp.chello.be/mirror/] Mirrors at UPC Belgium (Chello,TVD)
   
*[ftp://mirrors.pandora.be/mirrors/] Mirrors at Pandora (Telenet)
   

-----------------------------------------------------------------------------
6.5. Usenet/Newsgroups

*[news:be.comp.os.linux] be.comp.os.linux at [http://groups.google.com/
    groups?hl=en&lr=&safe=off&group=be.comp.os.linux] Google
   

-----------------------------------------------------------------------------
6.6. IRC

The fastest medium to get support is IRC, but beware. Because IRC is rather
anonymous it's also easy to deceive people.

On IRCnet there's a channel called #linux.be that is closely related to bcol
and the Belgian Linux-scene. The channel is still small, but it surely will
grow in time. To get help in English, there's only one place #linux.

Also Dalnet has a #linux.be channel.
