diff --git a/.clang-format b/.clang-format index f371a13b4d192d..c7060124a47aa2 100644 --- a/.clang-format +++ b/.clang-format @@ -140,8 +140,8 @@ ForEachMacros: - 'damon_for_each_scheme_safe' - 'damon_for_each_target' - 'damon_for_each_target_safe' - - 'damos_for_each_filter' - - 'damos_for_each_filter_safe' + - 'damos_for_each_core_filter' + - 'damos_for_each_core_filter_safe' - 'damos_for_each_ops_filter' - 'damos_for_each_ops_filter_safe' - 'damos_for_each_quota_goal' @@ -167,7 +167,7 @@ ForEachMacros: - 'drm_connector_for_each_possible_encoder' - 'drm_exec_for_each_locked_object' - 'drm_exec_for_each_locked_object_reverse' - - 'drm_for_each_bridge_in_chain' + - 'drm_for_each_bridge_in_chain_scoped' - 'drm_for_each_connector_iter' - 'drm_for_each_crtc' - 'drm_for_each_crtc_reverse' @@ -415,6 +415,7 @@ ForEachMacros: - 'for_each_prop_dlc_cpus' - 'for_each_prop_dlc_platforms' - 'for_each_property_of_node' + - 'for_each_pt_level_entry' - 'for_each_rdt_resource' - 'for_each_reg' - 'for_each_reg_filtered' @@ -747,6 +748,7 @@ ForEachMacros: - 'ynl_attr_for_each_nested' - 'ynl_attr_for_each_payload' - 'zorro_for_each_dev' + - 'zpci_bus_for_each' IncludeBlocks: Preserve IncludeCategories: diff --git a/.gitignore b/.gitignore index 86a1ba0d903539..3a7241c941f5e6 100644 --- a/.gitignore +++ b/.gitignore @@ -41,6 +41,7 @@ *.o.* *.patch *.pyc +*.rlib *.rmeta *.rpm *.rsi diff --git a/.mailmap b/.mailmap index fffbfd413474b9..fa018b5bd53398 100644 --- a/.mailmap +++ b/.mailmap @@ -127,7 +127,8 @@ Barry Song Barry Song Bart Van Assche Bart Van Assche -Bartosz Golaszewski +Bartosz Golaszewski +Bartosz Golaszewski Ben Dooks Ben Dooks Ben Gardner @@ -174,6 +175,7 @@ Carlos Bilbao Changbin Du Chao Yu Chao Yu +Chen-Yu Tsai Chester Lin Chris Chiu Chris Chiu @@ -185,6 +187,9 @@ Christian Brauner Christian Brauner Christian Brauner Christian Marangi +Christophe Leroy +Christophe Leroy +Christophe Leroy Christophe Ricard Christopher Obbard Christoph Hellwig @@ -299,6 +304,7 @@ Hans de Goede Hans Verkuil Hans Verkuil Hans Verkuil +Hao Ge Harry Yoo <42.hyeyoo@gmail.com> Heiko Carstens Heiko Carstens @@ -344,7 +350,8 @@ Jayachandran C Jayachandran C Jayachandran C Jayachandran C - +Jean-Philippe Brucker +Jean-Philippe Brucker Jean-Michel Hautbois Jean Tourrilhes Jeevan Shriram @@ -409,6 +416,7 @@ Juha Yrjola Juha Yrjola Juha Yrjola Julien Thierry +Justin Iurman Iskren Chernev Kalle Valo Kalle Valo @@ -465,6 +473,10 @@ Linas Vepstas Linus Lüssing Linus Lüssing Linus Lüssing +Linus Walleij +Linus Walleij +Linus Walleij +Linus Walleij Li Yang Li Yang @@ -498,9 +510,7 @@ Mark Brown Mark Starovoytov Markus Schneider-Pargmann Mark Yao -Martin Kepplinger -Martin Kepplinger -Martin Kepplinger +Martin Kepplinger-Novakovic Martyna Szapar-Mudlaw Mathieu Othacehe Mat Martineau @@ -589,8 +599,8 @@ Nicolas Pitre Nicolas Pitre Nicolas Saenz Julienne Nicolas Saenz Julienne -Nicolas Schier -Nicolas Schier +Nicolas Schier +Nicolas Schier Niklas Söderlund Nikolay Aleksandrov Nikolay Aleksandrov @@ -637,6 +647,7 @@ Peter Oruba Peter Oruba Pierre-Louis Bossart Pratyush Anand +Pratyush Yadav Praveen BP Pradeep Kumar Chitrapu Prasad Sodagudi @@ -694,10 +705,13 @@ Sakari Ailus Sam Protsenko Sam Protsenko Sam Ravnborg +Samuel Kayode Sankeerth Billakanti Santosh Shilimkar Santosh Shilimkar Sarangdhar Joshi +Saravana Kannan +Saravana Kannan Sascha Hauer Sahitya Tummala Sathishkumar Muruganandam @@ -787,6 +801,7 @@ Tanzir Hasan Tejun Heo Tomeu Vizoso Thomas Graf +Thomas Gleixner Thomas Körper Thomas Pedersen Thorsten Blum @@ -849,6 +864,8 @@ Vivien Didelot Vlad Dogaru Vladimir Davydov Vladimir Davydov +WangYuli +WangYuli Weiwen Hu WeiXiong Liao Wen Gong @@ -860,6 +877,7 @@ Yakir Yang Yanteng Si Ying Huang Yosry Ahmed +Yu-Chun Lin Yusuke Goda Zack Rusin Zhu Yanjun diff --git a/.pylintrc b/.pylintrc index 89eaf2100eddc7..8c6fc2b628b3e9 100644 --- a/.pylintrc +++ b/.pylintrc @@ -1,2 +1,2 @@ [MASTER] -init-hook='import sys; sys.path += ["scripts/lib/kdoc", "scripts/lib/abi", "tools/docs/lib"]' +init-hook='import sys; sys.path += ["tools/lib/python"]' diff --git a/CREDITS b/CREDITS index fa5397f4ebcdd0..383809bc4b7ac8 100644 --- a/CREDITS +++ b/CREDITS @@ -16,6 +16,10 @@ D: One of assisting postmasters for vger.kernel.org's lists S: (ask for current address) S: Finland +N: Kishon Vijay Abraham I +E: kishon@kernel.org +D: Generic Phy Framework + N: Thomas Abraham E: thomas.ab@samsung.com D: Samsung pin controller driver @@ -1394,7 +1398,7 @@ D: SRM environment driver (for Alpha systems) P: 1024D/8399E1BB 250D 3BCF 7127 0D8C A444 A961 1DBD 5E75 8399 E1BB N: Thomas Gleixner -E: tglx@linutronix.de +E: tglx@kernel.org D: NAND flash hardware support, JFFS2 on NAND flash N: Jérôme Glisse @@ -1983,6 +1987,7 @@ D: netfilter: TCP window tracking code D: netfilter: raw table D: netfilter: iprange match D: netfilter: new logging interfaces +D: netfilter: ipset D: netfilter: various other hacks S: Tata S: Hungary @@ -2056,16 +2061,15 @@ S: Korte Heul 95 S: 1403 ND BUSSUM S: The Netherlands -N: Martin Kepplinger +N: Martin Kepplinger-Novakovic E: martink@posteo.de -E: martin.kepplinger@puri.sm -W: http://www.martinkepplinger.com P: 4096R/5AB387D3 F208 2B88 0F9E 4239 3468 6E3F 5003 98DF 5AB3 87D3 D: mma8452 accelerators iio driver D: pegasus_notetaker input driver +D: imx8m media and hi846 sensor driver D: Kernel fixes and cleanups -S: Garnisonstraße 26 -S: 4020 Linz +S: Keplerstr. 6 +S: 4050 Traun S: Austria N: Karl Keyte diff --git a/Documentation/ABI/obsolete/sysfs-kernel-kexec-kdump b/Documentation/ABI/obsolete/sysfs-kernel-kexec-kdump new file mode 100644 index 00000000000000..ba26a6a1d2bebd --- /dev/null +++ b/Documentation/ABI/obsolete/sysfs-kernel-kexec-kdump @@ -0,0 +1,71 @@ +NOTE: all the ABIs listed in this file are deprecated and will be removed after 2028. + +Here are the alternative ABIs: ++------------------------------------+-----------------------------------------+ +| Deprecated | Alternative | ++------------------------------------+-----------------------------------------+ +| /sys/kernel/kexec_loaded | /sys/kernel/kexec/loaded | ++------------------------------------+-----------------------------------------+ +| /sys/kernel/kexec_crash_loaded | /sys/kernel/kexec/crash_loaded | ++------------------------------------+-----------------------------------------+ +| /sys/kernel/kexec_crash_size | /sys/kernel/kexec/crash_size | ++------------------------------------+-----------------------------------------+ +| /sys/kernel/crash_elfcorehdr_size | /sys/kernel/kexec/crash_elfcorehdr_size | ++------------------------------------+-----------------------------------------+ +| /sys/kernel/kexec_crash_cma_ranges | /sys/kernel/kexec/crash_cma_ranges | ++------------------------------------+-----------------------------------------+ + + +What: /sys/kernel/kexec_loaded +Date: Jun 2006 +Contact: kexec@lists.infradead.org +Description: read only + Indicates whether a new kernel image has been loaded + into memory using the kexec system call. It shows 1 if + a kexec image is present and ready to boot, or 0 if none + is loaded. +User: kexec tools, kdump service + +What: /sys/kernel/kexec_crash_loaded +Date: Jun 2006 +Contact: kexec@lists.infradead.org +Description: read only + Indicates whether a crash (kdump) kernel is currently + loaded into memory. It shows 1 if a crash kernel has been + successfully loaded for panic handling, or 0 if no crash + kernel is present. +User: Kexec tools, Kdump service + +What: /sys/kernel/kexec_crash_size +Date: Dec 2009 +Contact: kexec@lists.infradead.org +Description: read/write + Shows the amount of memory reserved for loading the crash + (kdump) kernel. It reports the size, in bytes, of the + crash kernel area defined by the crashkernel= parameter. + This interface also allows reducing the crashkernel + reservation by writing a smaller value, and the reclaimed + space is added back to the system RAM. +User: Kdump service + +What: /sys/kernel/crash_elfcorehdr_size +Date: Aug 2023 +Contact: kexec@lists.infradead.org +Description: read only + Indicates the preferred size of the memory buffer for the + ELF core header used by the crash (kdump) kernel. It defines + how much space is needed to hold metadata about the crashed + system, including CPU and memory information. This information + is used by the user space utility kexec to support updating the + in-kernel kdump image during hotplug operations. +User: Kexec tools + +What: /sys/kernel/kexec_crash_cma_ranges +Date: Nov 2025 +Contact: kexec@lists.infradead.org +Description: read only + Provides information about the memory ranges reserved from + the Contiguous Memory Allocator (CMA) area that are allocated + to the crash (kdump) kernel. It lists the start and end physical + addresses of CMA regions assigned for crashkernel use. +User: kdump service diff --git a/Documentation/ABI/stable/sysfs-driver-qaic b/Documentation/ABI/stable/sysfs-driver-qaic new file mode 100644 index 00000000000000..c767a93342b3c9 --- /dev/null +++ b/Documentation/ABI/stable/sysfs-driver-qaic @@ -0,0 +1,19 @@ +What: /sys/bus/pci/drivers/qaic/XXXX:XX:XX.X/accel/accel/dbc_state +Date: October 2025 +KernelVersion: 6.19 +Contact: Jeff Hugo +Description: Represents the current state of DMA Bridge channel (DBC). Below are the possible + states: + + =================== ========================================================== + IDLE (0) DBC is free and can be activated + ASSIGNED (1) DBC is activated and a workload is running on device + BEFORE_SHUTDOWN (2) Sub-system associated with this workload has crashed and + it will shutdown soon + AFTER_SHUTDOWN (3) Sub-system associated with this workload has crashed and + it has shutdown + BEFORE_POWER_UP (4) Sub-system associated with this workload is shutdown and + it will be powered up soon + AFTER_POWER_UP (5) Sub-system associated with this workload is now powered up + =================== ========================================================== +Users: Any userspace application or clients interested in DBC state. diff --git a/Documentation/ABI/stable/sysfs-kernel-time-aux-clocks b/Documentation/ABI/stable/sysfs-kernel-time-aux-clocks index 825508f42af603..e1a894c8dd1bd3 100644 --- a/Documentation/ABI/stable/sysfs-kernel-time-aux-clocks +++ b/Documentation/ABI/stable/sysfs-kernel-time-aux-clocks @@ -1,5 +1,5 @@ What: /sys/kernel/time/aux_clocks//enable Date: May 2025 -Contact: Thomas Gleixner +Contact: Thomas Gleixner Description: Controls the enablement of auxiliary clock timekeepers. diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy index c2385183826cbb..d4b3696a9efb3e 100644 --- a/Documentation/ABI/testing/ima_policy +++ b/Documentation/ABI/testing/ima_policy @@ -20,9 +20,10 @@ Description: rule format: action [condition ...] action: measure | dont_measure | appraise | dont_appraise | - audit | hash | dont_hash + audit | dont_audit | hash | dont_hash condition:= base | lsm [option] base: [[func=] [mask=] [fsmagic=] [fsuuid=] [fsname=] + [fs_subtype=] [uid=] [euid=] [gid=] [egid=] [fowner=] [fgroup=]] lsm: [[subj_user=] [subj_role=] [subj_type=] diff --git a/Documentation/ABI/testing/rtc-cdev b/Documentation/ABI/testing/rtc-cdev index 25910c3c3d7eb1..cec099a27c6d5c 100644 --- a/Documentation/ABI/testing/rtc-cdev +++ b/Documentation/ABI/testing/rtc-cdev @@ -14,7 +14,7 @@ Description: for RTCs that support alarms * RTC_ALM_READ, RTC_ALM_SET: Read or set the alarm time for - RTCs that support alarms. Can be set upto 24 hours in the + RTCs that support alarms. Can be set up to 24 hours in the future. Requires a separate RTC_AIE_ON call to enable the alarm interrupt. (Prefer to use RTC_WKALM_*) diff --git a/Documentation/ABI/testing/sysfs-auxdisplay-linedisp b/Documentation/ABI/testing/sysfs-auxdisplay-linedisp new file mode 100644 index 00000000000000..55f1b559e84ebe --- /dev/null +++ b/Documentation/ABI/testing/sysfs-auxdisplay-linedisp @@ -0,0 +1,90 @@ +What: /sys/.../message +Date: October 2021 +KernelVersion: 5.16 +Description: + Controls the text message displayed on character line displays. + + Reading returns the current message with a trailing newline. + Writing updates the displayed message. Messages longer than the + display width will automatically scroll. Trailing newlines in + input are automatically trimmed. + + Writing an empty string clears the display. + + Example: + echo "Hello World" > message + cat message # Returns "Hello World\n" + +What: /sys/.../num_chars +Date: November 2025 +KernelVersion: 6.18 +Contact: Jean-François Lessard +Description: + Read-only attribute showing the character width capacity of + the line display device. Messages longer than this will scroll. + + Example: + cat num_chars # Returns "16\n" for 16-char display + +What: /sys/.../scroll_step_ms +Date: October 2021 +KernelVersion: 5.16 +Description: + Controls the scrolling speed for messages longer than the display + width, specified in milliseconds per scroll step. + + Setting to 0 disables scrolling. Default is 500ms. + + Example: + echo "250" > scroll_step_ms # 4Hz scrolling + cat scroll_step_ms # Returns "250\n" + +What: /sys/.../map_seg7 +Date: January 2024 +KernelVersion: 6.9 +Description: + Read/write binary blob representing the ASCII-to-7-segment + display conversion table used by the linedisp driver, as defined + by struct seg7_conversion_map in . + + Only visible on displays with 7-segment capability. + + This attribute is not human-readable. Writes must match the + struct size exactly, else -EINVAL is returned; reads return the + entire mapping as a binary blob. + + This interface and its implementation match existing conventions + used in segment-mapped display drivers since 2005. + + ABI note: This style of binary sysfs attribute *is an exception* + to current "one value per file, text only" sysfs rules, for + historical compatibility and driver uniformity. New drivers are + discouraged from introducing additional binary sysfs ABIs. + + Reference interface guidance: + - include/uapi/linux/map_to_7segment.h + +What: /sys/.../map_seg14 +Date: January 2024 +KernelVersion: 6.9 +Description: + Read/write binary blob representing the ASCII-to-14-segment + display conversion table used by the linedisp driver, as defined + by struct seg14_conversion_map in . + + Only visible on displays with 14-segment capability. + + This attribute is not human-readable. Writes must match the + struct size exactly, else -EINVAL is returned; reads return the + entire mapping as a binary blob. + + This interface and its implementation match existing conventions + used by segment-mapped display drivers since 2005. + + ABI note: This style of binary sysfs attribute *is an exception* + to current "one value per file, text only" sysfs rules, for + historical compatibility and driver uniformity. New drivers are + discouraged from introducing additional binary sysfs ABIs. + + Reference interface guidance: + - include/uapi/linux/map_to_14segment.h diff --git a/Documentation/ABI/testing/sysfs-block-bcache b/Documentation/ABI/testing/sysfs-block-bcache index 9e4bbc5d51fd50..9344a657ca70f2 100644 --- a/Documentation/ABI/testing/sysfs-block-bcache +++ b/Documentation/ABI/testing/sysfs-block-bcache @@ -106,13 +106,6 @@ Description: will be discarded from the cache. Should not be turned off with writeback caching enabled. -What: /sys/block//bcache/discard -Date: November 2010 -Contact: Kent Overstreet -Description: - For a cache, a boolean allowing discard/TRIM to be turned off - or back on if the device supports it. - What: /sys/block//bcache/bucket_size Date: November 2010 Contact: Kent Overstreet diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl index 6b4e8c7a963da5..c80a1b5a03dbae 100644 --- a/Documentation/ABI/testing/sysfs-bus-cxl +++ b/Documentation/ABI/testing/sysfs-bus-cxl @@ -496,8 +496,17 @@ Description: changed, only freed by writing 0. The kernel makes no guarantees that data is maintained over an address space freeing event, and there is no guarantee that a free followed by an allocate - results in the same address being allocated. + results in the same address being allocated. If extended linear + cache is present, the size indicates extended linear cache size + plus the CXL region size. +What: /sys/bus/cxl/devices/regionZ/extended_linear_cache_size +Date: October, 2025 +KernelVersion: v6.19 +Contact: linux-cxl@vger.kernel.org +Description: + (RO) The size of extended linear cache, if there is an extended + linear cache. Otherwise the attribute will not be visible. What: /sys/bus/cxl/devices/regionZ/mode Date: January, 2023 diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 89b4740dcfa146..5f87dcee78f768 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -898,6 +898,7 @@ What: /sys/.../iio:deviceX/events/in_tempY_thresh_rising_en What: /sys/.../iio:deviceX/events/in_tempY_thresh_falling_en What: /sys/.../iio:deviceX/events/in_capacitanceY_thresh_rising_en What: /sys/.../iio:deviceX/events/in_capacitanceY_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_pressure_thresh_rising_en KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: @@ -926,6 +927,7 @@ What: /sys/.../iio:deviceX/events/in_accel_y_roc_rising_en What: /sys/.../iio:deviceX/events/in_accel_y_roc_falling_en What: /sys/.../iio:deviceX/events/in_accel_z_roc_rising_en What: /sys/.../iio:deviceX/events/in_accel_z_roc_falling_en +What: /sys/.../iio:deviceX/events/in_accel_x&y&z_roc_rising_en What: /sys/.../iio:deviceX/events/in_anglvel_x_roc_rising_en What: /sys/.../iio:deviceX/events/in_anglvel_x_roc_falling_en What: /sys/.../iio:deviceX/events/in_anglvel_y_roc_rising_en @@ -1001,6 +1003,7 @@ Description: to the raw signal, allowing slow tracking to resume and the adaptive threshold event detection to function as expected. +What: /sys/.../events/in_accel_mag_adaptive_rising_value What: /sys/.../events/in_accel_thresh_rising_value What: /sys/.../events/in_accel_thresh_falling_value What: /sys/.../events/in_accel_x_raw_thresh_rising_value @@ -1045,6 +1048,7 @@ What: /sys/.../events/in_capacitanceY_thresh_rising_value What: /sys/.../events/in_capacitanceY_thresh_falling_value What: /sys/.../events/in_capacitanceY_thresh_adaptive_rising_value What: /sys/.../events/in_capacitanceY_thresh_falling_rising_value +What: /sys/.../events/in_pressure_thresh_rising_value KernelVersion: 2.6.37 Contact: linux-iio@vger.kernel.org Description: @@ -1147,6 +1151,7 @@ Description: will get activated once in_voltage0_raw goes above 1200 and will become deactivated again once the value falls below 1150. +What: /sys/.../events/in_accel_roc_rising_value What: /sys/.../events/in_accel_x_raw_roc_rising_value What: /sys/.../events/in_accel_x_raw_roc_falling_value What: /sys/.../events/in_accel_y_raw_roc_rising_value @@ -1193,6 +1198,8 @@ Description: value is in raw device units or in processed units (as _raw and _input do on sysfs direct channel read attributes). +What: /sys/.../events/in_accel_mag_adaptive_rising_period +What: /sys/.../events/in_accel_roc_rising_period What: /sys/.../events/in_accel_x_thresh_rising_period What: /sys/.../events/in_accel_x_thresh_falling_period What: /sys/.../events/in_accel_x_roc_rising_period @@ -1362,6 +1369,15 @@ Description: number or direction is not specified, applies to all channels of this type. +What: /sys/.../iio:deviceX/events/in_accel_x_mag_adaptive_rising_en +What: /sys/.../iio:deviceX/events/in_accel_y_mag_adaptive_rising_en +What: /sys/.../iio:deviceX/events/in_accel_z_mag_adaptive_rising_en +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Similar to in_accel_x_thresh[_rising|_falling]_en, but here the + magnitude of the channel is compared to the adaptive threshold. + What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_en What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_rising_en What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_falling_en @@ -2422,3 +2438,23 @@ Description: Value representing the user's attention to the system expressed in units as percentage. This usually means if the user is looking at the screen or not. + +What: /sys/.../events/in_accel_value_available +KernelVersion: 6.18 +Contact: linux-iio@vger.kernel.org +Description: + List of available threshold values for acceleration event + generation. Applies to all event types on in_accel channels. + Units after application of scale and offset are m/s^2. + Expressed as: + + - a range specified as "[min step max]" + +What: /sys/.../events/in_accel_period_available +KernelVersion: 6.18 +Contact: linux-iio@vger.kernel.org +Description: + List of available periods for accelerometer event detection in + seconds, expressed as: + + - a range specified as "[min step max]" diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci index 92debe879ffbf5..b767db2c52cb70 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci +++ b/Documentation/ABI/testing/sysfs-bus-pci @@ -621,3 +621,84 @@ Description: number extended capability. The file is read only and due to the possible sensitivity of accessible serial numbers, admin only. + +What: /sys/bus/pci/devices/.../tsm/ +Contact: linux-coco@lists.linux.dev +Description: + This directory only appears if a physical device function + supports authentication (PCIe CMA-SPDM), interface security + (PCIe TDISP), and is accepted for secure operation by the + platform TSM driver. This attribute directory appears + dynamically after the platform TSM driver loads. So, only after + the /sys/class/tsm/tsm0 device arrives can tools assume that + devices without a tsm/ attribute directory will never have one; + before that, the security capabilities of the device relative to + the platform TSM are unknown. See + Documentation/ABI/testing/sysfs-class-tsm. + +What: /sys/bus/pci/devices/.../tsm/connect +Contact: linux-coco@lists.linux.dev +Description: + (RW) Write the name of a TSM (TEE Security Manager) device from + /sys/class/tsm to this file to establish a connection with the + device. This typically includes an SPDM (DMTF Security + Protocols and Data Models) session over PCIe DOE (Data Object + Exchange) and may also include PCIe IDE (Integrity and Data + Encryption) establishment. Reads from this attribute return the + name of the connected TSM or the empty string if not + connected. A TSM device signals its readiness to accept PCI + connection via a KOBJ_CHANGE event. + +What: /sys/bus/pci/devices/.../tsm/disconnect +Contact: linux-coco@lists.linux.dev +Description: + (WO) Write the name of the TSM device that was specified + to 'connect' to teardown the connection. + +What: /sys/bus/pci/devices/.../tsm/dsm +Contact: linux-coco@lists.linux.dev +Description: (RO) Return PCI device name of this device's DSM (Device + Security Manager). When a device is in the connected state it + indicates that the platform TSM (TEE Security Manager) has made + a secure-session connection with a device's DSM. A DSM is always + physical function 0 and when the device supports TDISP (TEE + Device Interface Security Protocol) its managed functions also + populate this tsm/dsm attribute. The managed functions of a DSM + are SR-IOV (Single Root I/O Virtualization) virtual functions, + non-zero functions of a multi-function device, or downstream + endpoints depending on whether the DSM is an SR-IOV physical + function, function0 of a multi-function device, or an upstream + PCIe switch port. This is a "link" TSM attribute, see + Documentation/ABI/testing/sysfs-class-tsm. + +What: /sys/bus/pci/devices/.../tsm/bound +Contact: linux-coco@lists.linux.dev +Description: (RO) Return the device name of the TSM when the device is in a + TDISP (TEE Device Interface Security Protocol) operational state + (LOCKED, RUN, or ERROR, not UNLOCKED). Bound devices consume + platform TSM resources and depend on the device's configuration + (e.g. BME (Bus Master Enable) and MSE (Memory Space Enable) + among other settings) to remain stable for the duration of the + bound state. This attribute is only visible for devices that + support TDISP operation, and it is only populated after + successful connect and TSM bind. The TSM bind operation is + initiated by VFIO/IOMMUFD. This is a "link" TSM attribute, see + Documentation/ABI/testing/sysfs-class-tsm. + +What: /sys/bus/pci/devices/.../authenticated +Contact: linux-pci@vger.kernel.org +Description: + When the device's tsm/ directory is present device + authentication (PCIe CMA-SPDM) and link encryption (PCIe IDE) + are handled by the platform TSM (TEE Security Manager). When the + tsm/ directory is not present this attribute reflects only the + native CMA-SPDM authentication state with the kernel's + certificate store. + + If the attribute is not present, it indicates that + authentication is unsupported by the device, or the TSM has no + available authentication methods for the device. + + When present and the tsm/ attribute directory is present, the + authenticated attribute is an alias for the device 'connect' + state. See the 'tsm/connect' attribute for more details. diff --git a/Documentation/ABI/testing/sysfs-class-platform-profile b/Documentation/ABI/testing/sysfs-class-platform-profile index dc72adfb830a4f..fcab26894ec334 100644 --- a/Documentation/ABI/testing/sysfs-class-platform-profile +++ b/Documentation/ABI/testing/sysfs-class-platform-profile @@ -23,6 +23,8 @@ Description: This file contains a space-separated list of profiles supported power consumption with a slight bias towards performance performance High performance operation + max-power Higher performance operation that may exceed + internal battery draw limits when on AC power custom Driver defined custom profile ==================== ======================================== diff --git a/Documentation/ABI/testing/sysfs-class-power-rt9756 b/Documentation/ABI/testing/sysfs-class-power-rt9756 new file mode 100644 index 00000000000000..c4d6c2b4715d3e --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-power-rt9756 @@ -0,0 +1,30 @@ +What: /sys/class/power_supply/rt9756-*/watchdog_timer +Date: Dec 2025 +KernelVersion: 6.19 +Contact: ChiYuan Huang +Description: + This entry shows and sets the watchdog timer when rt9756 charger + operates in charging mode. When the timer expires, the device + will disable the charging. To prevent the timer expires, any + host communication can make the timer restarted. + + Access: Read, Write + + Valid values: + - 500, 1000, 5000, 30000, 40000, 80000, 128000 or 255000 (milliseconds), + - 0: disabled + +What: /sys/class/power_supply/rt9756-*/operation_mode +Date: Dec 2025 +KernelVersion: 6.19 +Contact: ChiYuan Huang +Description: + This entry shows and set the operation mode when rt9756 charger + operates in charging phase. If 'bypass' mode is used, internal + path will connect vbus directly to vbat. Else, default 'div2' + mode for the switch-cap charging. + + Access: Read, Write + + Valid values: + - 'bypass' or 'div2' diff --git a/Documentation/ABI/testing/sysfs-class-tsm b/Documentation/ABI/testing/sysfs-class-tsm new file mode 100644 index 00000000000000..6fc1a5ac6da1af --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-tsm @@ -0,0 +1,19 @@ +What: /sys/class/tsm/tsmN +Contact: linux-coco@lists.linux.dev +Description: + "tsmN" is a device that represents the generic attributes of a + platform TEE Security Manager. It is typically a child of a + platform enumerated TSM device. /sys/class/tsm/tsmN/uevent + signals when the PCI layer is able to support establishment of + link encryption and other device-security features coordinated + through a platform tsm. + +What: /sys/class/tsm/tsmN/streamH.R.E +Contact: linux-pci@vger.kernel.org +Description: + (RO) When a host bridge has established a secure connection via + the platform TSM, symlink appears. The primary function of this + is have a system global review of TSM resource consumption + across host bridges. The link points to the endpoint PCI device + and matches the same link published by the host bridge. See + Documentation/ABI/testing/sysfs-devices-pci-host-bridge. diff --git a/Documentation/ABI/testing/sysfs-class-usb_power_delivery b/Documentation/ABI/testing/sysfs-class-usb_power_delivery index 61d233c320ea7f..c754458a527e7f 100644 --- a/Documentation/ABI/testing/sysfs-class-usb_power_delivery +++ b/Documentation/ABI/testing/sysfs-class-usb_power_delivery @@ -254,3 +254,31 @@ Contact: Heikki Krogerus Description: The PPS Power Limited bit indicates whether or not the source supply will exceed the rated output power if requested. + +Standard Power Range (SPR) Adjustable Voltage Supplies + +What: /sys/class/usb_power_delivery/...//:spr_adjustable_voltage_supply +Date: Oct 2025 +Contact: Badhri Jagan Sridharan +Description: + Adjustable Voltage Supply (AVS) Augmented PDO (APDO). + +What: /sys/class/usb_power_delivery/...//:spr_adjustable_voltage_supply/maximum_current_9V_to_15V +Date: Oct 2025 +Contact: Badhri Jagan Sridharan +Description: + Maximum Current for 9V to 15V range in milliamperes. + +What: /sys/class/usb_power_delivery/...//:spr_adjustable_voltage_supply/maximum_current_15V_to_20V +Date: Oct 2025 +Contact: Badhri Jagan Sridharan +Description: + Maximum Current for greater than 15V till 20V range in + milliamperes. + +What: /sys/class/usb_power_delivery/...//:spr_adjustable_voltage_supply/peak_current +Date: Oct 2025 +Contact: Badhri Jagan Sridharan +Description: + This file shows the value of the Adjustable Voltage Supply Peak Current + Capability field. diff --git a/Documentation/ABI/testing/sysfs-devices-pci-host-bridge b/Documentation/ABI/testing/sysfs-devices-pci-host-bridge new file mode 100644 index 00000000000000..b91ec345081156 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-pci-host-bridge @@ -0,0 +1,45 @@ +What: /sys/devices/pciDDDD:BB + /sys/devices/.../pciDDDD:BB +Contact: linux-pci@vger.kernel.org +Description: + A PCI host bridge device parents a PCI bus device topology. PCI + controllers may also parent host bridges. The DDDD:BB format + conveys the PCI domain (ACPI segment) number and root bus number + (in hexadecimal) of the host bridge. Note that the domain number + may be larger than the 16-bits that the "DDDD" format implies + for emulated host-bridges. + +What: pciDDDD:BB/firmware_node +Contact: linux-pci@vger.kernel.org +Description: + (RO) Symlink to the platform firmware device object "companion" + of the host bridge. For example, an ACPI device with an _HID of + PNP0A08 (/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00). See + /sys/devices/pciDDDD:BB entry for details about the DDDD:BB + format. + +What: pciDDDD:BB/streamH.R.E +Contact: linux-pci@vger.kernel.org +Description: + (RO) When a platform has established a secure connection, PCIe + IDE, between two Partner Ports, this symlink appears. A stream + consumes a Stream ID slot in each of the Host bridge (H), Root + Port (R) and Endpoint (E). The link points to the Endpoint PCI + device in the Selective IDE Stream pairing. Specifically, "R" + and "E" represent the assigned Selective IDE Stream Register + Block in the Root Port and Endpoint, and "H" represents a + platform specific pool of stream resources shared by the Root + Ports in a host bridge. See /sys/devices/pciDDDD:BB entry for + details about the DDDD:BB format. + +What: pciDDDD:BB/available_secure_streams +Contact: linux-pci@vger.kernel.org +Description: + (RO) When a host bridge has Root Ports that support PCIe IDE + (link encryption and integrity protection) there may be a + limited number of Selective IDE Streams that can be used for + establishing new end-to-end secure links. This attribute + decrements upon secure link setup, and increments upon secure + link teardown. The in-use stream count is determined by counting + stream symlinks. See /sys/devices/pciDDDD:BB entry for details + about the DDDD:BB format. diff --git a/Documentation/ABI/testing/sysfs-devices-soc b/Documentation/ABI/testing/sysfs-devices-soc index 5269808ec35f8e..cb6776a4afe02a 100644 --- a/Documentation/ABI/testing/sysfs-devices-soc +++ b/Documentation/ABI/testing/sysfs-devices-soc @@ -17,14 +17,14 @@ Date: January 2012 contact: Lee Jones Description: Read-only attribute common to all SoCs. Contains the SoC machine - name (e.g. Ux500). + name (e.g. DB8500). What: /sys/devices/socX/family Date: January 2012 contact: Lee Jones Description: Read-only attribute common to all SoCs. Contains SoC family name - (e.g. DB8500). + (e.g. ux500). On many of ARM based silicon with SMCCC v1.2+ compliant firmware this will contain the JEDEC JEP106 manufacturer’s identification diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 8aed6d94c4cd0d..3a05604c21bf8d 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -764,6 +764,17 @@ Description: participate in load balancing. These CPUs are set by boot parameter "isolcpus=". +What: /sys/devices/system/cpu/housekeeping +Date: Oct 2025 +Contact: Linux kernel mailing list +Description: + (RO) the list of logical CPUs that are designated by the kernel as + "housekeeping". Each CPU are responsible for handling essential + system-wide background tasks, including RCU callbacks, delayed + timer callbacks, and unbound workqueues, minimizing scheduling + jitter on low-latency, isolated CPUs. These CPUs are set when boot + parameter "isolcpus=nohz" or "nohz_full=" is specified. + What: /sys/devices/system/cpu/crash_hotplug Date: Aug 2023 Contact: Linux kernel mailing list diff --git a/Documentation/ABI/testing/sysfs-driver-intel-xe-sriov b/Documentation/ABI/testing/sysfs-driver-intel-xe-sriov new file mode 100644 index 00000000000000..2fd7e9b7bacc08 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-intel-xe-sriov @@ -0,0 +1,159 @@ +What: /sys/bus/pci/drivers/xe/.../sriov_admin/ +Date: October 2025 +KernelVersion: 6.19 +Contact: intel-xe@lists.freedesktop.org +Description: + This directory appears for the particular Intel Xe device when: + + - device supports SR-IOV, and + - device is a Physical Function (PF), and + - driver support for the SR-IOV PF is enabled on given device. + + This directory is used as a root for all attributes required to + manage both Physical Function (PF) and Virtual Functions (VFs). + + +What: /sys/bus/pci/drivers/xe/.../sriov_admin/pf/ +Date: October 2025 +KernelVersion: 6.19 +Contact: intel-xe@lists.freedesktop.org +Description: + This directory holds attributes related to the SR-IOV Physical + Function (PF). + + +What: /sys/bus/pci/drivers/xe/.../sriov_admin/vf1/ +What: /sys/bus/pci/drivers/xe/.../sriov_admin/vf2/ +What: /sys/bus/pci/drivers/xe/.../sriov_admin/vf/ +Date: October 2025 +KernelVersion: 6.19 +Contact: intel-xe@lists.freedesktop.org +Description: + These directories hold attributes related to the SR-IOV Virtual + Functions (VFs). + + Note that the VF number is 1-based as described in PCI SR-IOV + specification as the Xe driver follows that naming schema. + + There could be "vf1", "vf2" and so on, up to "vf", where + matches the value of the "sriov_totalvfs" attribute. + + +What: /sys/bus/pci/drivers/xe/.../sriov_admin/pf/profile/exec_quantum_ms +What: /sys/bus/pci/drivers/xe/.../sriov_admin/pf/profile/preempt_timeout_us +What: /sys/bus/pci/drivers/xe/.../sriov_admin/pf/profile/sched_priority +What: /sys/bus/pci/drivers/xe/.../sriov_admin/vf/profile/exec_quantum_ms +What: /sys/bus/pci/drivers/xe/.../sriov_admin/vf/profile/preempt_timeout_us +What: /sys/bus/pci/drivers/xe/.../sriov_admin/vf/profile/sched_priority +Date: October 2025 +KernelVersion: 6.19 +Contact: intel-xe@lists.freedesktop.org +Description: + These files expose scheduling parameters for the PF and its VFs, and + are visible only on Intel Xe platforms that use time-sliced GPU sharing. + They can be changed even if VFs are enabled and running and reflect the + settings of all tiles/GTs assigned to the given function. + + exec_quantum_ms: (RW) unsigned integer + The GT execution quantum (EQ) in [ms] for the given function. + Actual quantum value might be aligned per HW/FW requirements. + + Default is 0 (unlimited). + + preempt_timeout_us: (RW) unsigned integer + The GT preemption timeout in [us] of the given function. + Actual timeout value might be aligned per HW/FW requirements. + + Default is 0 (unlimited). + + sched_priority: (RW/RO) string + The GT scheduling priority of the given function. + + "low" - function will be scheduled on the GPU for its EQ/PT + only if function has any work already submitted. + + "normal" - functions will be scheduled on the GPU for its EQ/PT + irrespective of whether it has submitted a work or not. + + "high" - function will be scheduled on the GPU for its EQ/PT + in the next time-slice after the current one completes + and function has a work submitted. + + Default is "low". + + When read, this file will display the current and available + scheduling priorities. The currently active priority level will + be enclosed in square brackets, like: + + [low] normal high + + This file can be read-only if changing the priority is not + supported. + + Writes to these attributes may fail with errors like: + -EINVAL if provided input is malformed or not recognized, + -EPERM if change is not applicable on given HW/FW, + -EIO if FW refuses to change the provisioning. + + Reads from these attributes may fail with: + -EUCLEAN if value is not consistent across all tiles/GTs. + + +What: /sys/bus/pci/drivers/xe/.../sriov_admin/.bulk_profile/exec_quantum_ms +What: /sys/bus/pci/drivers/xe/.../sriov_admin/.bulk_profile/preempt_timeout_us +What: /sys/bus/pci/drivers/xe/.../sriov_admin/.bulk_profile/sched_priority +Date: October 2025 +KernelVersion: 6.19 +Contact: intel-xe@lists.freedesktop.org +Description: + These files allows bulk reconfiguration of the scheduling parameters + of the PF or VFs and are available only for Intel Xe platforms with + GPU sharing based on the time-slice basis. These scheduling parameters + can be changed even if VFs are enabled and running. + + exec_quantum_ms: (WO) unsigned integer + The GT execution quantum (EQ) in [ms] to be applied to all functions. + See sriov_admin/{pf,vf}/profile/exec_quantum_ms for more details. + + preempt_timeout_us: (WO) unsigned integer + The GT preemption timeout (PT) in [us] to be applied to all functions. + See sriov_admin/{pf,vf}/profile/preempt_timeout_us for more details. + + sched_priority: (RW/RO) string + The GT scheduling priority to be applied for all functions. + See sriov_admin/{pf,vf}/profile/sched_priority for more details. + + Writes to these attributes may fail with errors like: + -EINVAL if provided input is malformed or not recognized, + -EPERM if change is not applicable on given HW/FW, + -EIO if FW refuses to change the provisioning. + + +What: /sys/bus/pci/drivers/xe/.../sriov_admin/vf/stop +Date: October 2025 +KernelVersion: 6.19 +Contact: intel-xe@lists.freedesktop.org +Description: + This file allows to control scheduling of the VF on the Intel Xe GPU + platforms. It allows to implement custom policy mechanism in case VFs + are misbehaving or triggering adverse events above defined thresholds. + + stop: (WO) bool + All GT executions of given function shall be immediately stopped. + To allow scheduling this VF again, the VF FLR must be triggered. + + Writes to this attribute may fail with errors like: + -EINVAL if provided input is malformed or not recognized, + -EPERM if change is not applicable on given HW/FW, + -EIO if FW refuses to change the scheduling. + + +What: /sys/bus/pci/drivers/xe/.../sriov_admin/pf/device +What: /sys/bus/pci/drivers/xe/.../sriov_admin/vf/device +Date: October 2025 +KernelVersion: 6.19 +Contact: intel-xe@lists.freedesktop.org +Description: + These are symlinks to the underlying PCI device entry representing + given Xe SR-IOV function. For the PF, this link is always present. + For VFs, this link is present only for currently enabled VFs. diff --git a/Documentation/ABI/testing/sysfs-driver-uio_pci_sva-pasid b/Documentation/ABI/testing/sysfs-driver-uio_pci_sva-pasid new file mode 100644 index 00000000000000..6892fe46cea823 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-uio_pci_sva-pasid @@ -0,0 +1,29 @@ +What: /sys/bus/pci/drivers/uio_pci_sva//pasid +Date: September 2025 +Contact: Yaxing Guo +Description: + Process Address Space ID (PASID) assigned by IOMMU driver to + the device for use with Shared Virtual Addressing (SVA). + + This read-only attribute exposes the PASID (A 20-bit identifier + used in PCIe Address Translation Services and iommu table walks) + allocated by the IOMMU driver during sva device binding. + + User-space UIO applications must read this attribute to obtain + the PASID and program it into the device's configuration registers. + This enables the device to perform DMA using user-space virtual + address, with address translation handled by IOMMU. + + UIO User-space applications must: + - Opening device and Mapping the device's register space via /dev/uioX + (This triggers the IOMMU driver to allocate the PASID) + - Reading the PASID from sysfs + - Writing the PASID to a device-specific register (with example offset) + The code may be like: + + map = mmap(..., "/dev/uio0", ...); + + f = fopen("/sys/.../pasid", "r"); + fscanf(f, "%d", &pasid); + + map[REG_PASID_OFFSET] = pasid; diff --git a/Documentation/ABI/testing/sysfs-driver-uniwill-laptop b/Documentation/ABI/testing/sysfs-driver-uniwill-laptop new file mode 100644 index 00000000000000..eaeb659793d231 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-uniwill-laptop @@ -0,0 +1,53 @@ +What: /sys/bus/platform/devices/INOU0000:XX/fn_lock_toggle_enable +Date: November 2025 +KernelVersion: 6.19 +Contact: Armin Wolf +Description: + Allows userspace applications to enable/disable the FN lock feature + of the integrated keyboard by writing "1"/"0" into this file. + + Reading this file returns the current enable status of the FN lock functionality. + +What: /sys/bus/platform/devices/INOU0000:XX/super_key_toggle_enable +Date: November 2025 +KernelVersion: 6.19 +Contact: Armin Wolf +Description: + Allows userspace applications to enable/disable the super key functionality + of the integrated keyboard by writing "1"/"0" into this file. + + Reading this file returns the current enable status of the super key functionality. + +What: /sys/bus/platform/devices/INOU0000:XX/touchpad_toggle_enable +Date: November 2025 +KernelVersion: 6.19 +Contact: Armin Wolf +Description: + Allows userspace applications to enable/disable the touchpad toggle functionality + of the integrated touchpad by writing "1"/"0" into this file. + + Reading this file returns the current enable status of the touchpad toggle + functionality. + +What: /sys/bus/platform/devices/INOU0000:XX/rainbow_animation +Date: November 2025 +KernelVersion: 6.19 +Contact: Armin Wolf +Description: + Forces the integrated lightbar to display a rainbow animation when the machine + is not suspended. Writing "1"/"0" into this file enables/disables this + functionality. + + Reading this file returns the current status of the rainbow animation functionality. + +What: /sys/bus/platform/devices/INOU0000:XX/breathing_in_suspend +Date: November 2025 +KernelVersion: 6.19 +Contact: Armin Wolf +Description: + Causes the integrated lightbar to display a breathing animation when the machine + has been suspended and is running on AC power. Writing "1"/"0" into this file + enables/disables this functionality. + + Reading this file returns the current status of the breathing animation + functionality. diff --git a/Documentation/ABI/testing/sysfs-fs-f2fs b/Documentation/ABI/testing/sysfs-fs-f2fs index b590809869ca64..770470e0598b80 100644 --- a/Documentation/ABI/testing/sysfs-fs-f2fs +++ b/Documentation/ABI/testing/sysfs-fs-f2fs @@ -643,6 +643,12 @@ Contact: "Jaegeuk Kim" Description: Shows the number of unusable blocks in a section which was defined by the zone capacity reported by underlying zoned device. +What: /sys/fs/f2fs//max_open_zones +Date: November 2025 +Contact: "Yongpeng Yang" +Description: Shows the max number of zones that F2FS can write concurrently when a zoned + device is mounted. + What: /sys/fs/f2fs//current_atomic_write Date: July 2022 Contact: "Daeho Jeong" diff --git a/Documentation/ABI/testing/sysfs-kernel-kexec-kdump b/Documentation/ABI/testing/sysfs-kernel-kexec-kdump new file mode 100644 index 00000000000000..f59051b5d96d73 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-kernel-kexec-kdump @@ -0,0 +1,61 @@ +What: /sys/kernel/kexec/* +Date: Nov 2025 +Contact: kexec@lists.infradead.org +Description: + The /sys/kernel/kexec/* directory contains sysfs files + that provide information about the configuration status + of kexec and kdump. + +What: /sys/kernel/kexec/loaded +Date: Nov 2025 +Contact: kexec@lists.infradead.org +Description: read only + Indicates whether a new kernel image has been loaded + into memory using the kexec system call. It shows 1 if + a kexec image is present and ready to boot, or 0 if none + is loaded. +User: kexec tools, kdump service + +What: /sys/kernel/kexec/crash_loaded +Date: Nov 2025 +Contact: kexec@lists.infradead.org +Description: read only + Indicates whether a crash (kdump) kernel is currently + loaded into memory. It shows 1 if a crash kernel has been + successfully loaded for panic handling, or 0 if no crash + kernel is present. +User: Kexec tools, Kdump service + +What: /sys/kernel/kexec/crash_size +Date: Nov 2025 +Contact: kexec@lists.infradead.org +Description: read/write + Shows the amount of memory reserved for loading the crash + (kdump) kernel. It reports the size, in bytes, of the + crash kernel area defined by the crashkernel= parameter. + This interface also allows reducing the crashkernel + reservation by writing a smaller value, and the reclaimed + space is added back to the system RAM. +User: Kdump service + +What: /sys/kernel/kexec/crash_elfcorehdr_size +Date: Nov 2025 +Contact: kexec@lists.infradead.org +Description: read only + Indicates the preferred size of the memory buffer for the + ELF core header used by the crash (kdump) kernel. It defines + how much space is needed to hold metadata about the crashed + system, including CPU and memory information. This information + is used by the user space utility kexec to support updating the + in-kernel kdump image during hotplug operations. +User: Kexec tools + +What: /sys/kernel/kexec/crash_cma_ranges +Date: Nov 2025 +Contact: kexec@lists.infradead.org +Description: read only + Provides information about the memory ranges reserved from + the Contiguous Memory Allocator (CMA) area that are allocated + to the crash (kdump) kernel. It lists the start and end physical + addresses of CMA regions assigned for crashkernel use. +User: kdump service diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-damon b/Documentation/ABI/testing/sysfs-kernel-mm-damon index b6b71db36ca72e..4fb8b7a6d625ae 100644 --- a/Documentation/ABI/testing/sysfs-kernel-mm-damon +++ b/Documentation/ABI/testing/sysfs-kernel-mm-damon @@ -164,6 +164,13 @@ Description: Writing to and reading from this file sets and gets the pid of the target process if the context is for virtual address spaces monitoring, respectively. +What: /sys/kernel/mm/damon/admin/kdamonds//contexts//targets//obsolete_target +Date: Oct 2025 +Contact: SeongJae Park +Description: Writing to and reading from this file sets and gets the + obsoleteness of the matching parameters commit destination + target. + What: /sys/kernel/mm/damon/admin/kdamonds//contexts//targets//regions/nr_regions Date: Mar 2022 Contact: SeongJae Park @@ -303,6 +310,12 @@ Contact: SeongJae Park Description: Writing to and reading from this file sets and gets the nid parameter of the goal. +What: /sys/kernel/mm/damon/admin/kdamonds//contexts//schemes//quotas/goals//path +Date: Oct 2025 +Contact: SeongJae Park +Description: Writing to and reading from this file sets and gets the path + parameter of the goal. + What: /sys/kernel/mm/damon/admin/kdamonds//contexts//schemes//quotas/weights/sz_permil Date: Mar 2022 Contact: SeongJae Park diff --git a/Documentation/ABI/testing/sysfs-module b/Documentation/ABI/testing/sysfs-module index 62addab47d0c59..6bc9af6229f001 100644 --- a/Documentation/ABI/testing/sysfs-module +++ b/Documentation/ABI/testing/sysfs-module @@ -59,6 +59,8 @@ Description: Module taint flags: F force-loaded module C staging driver module E unsigned module + K livepatch module + N in-kernel test module == ===================== What: /sys/module/grant_table/parameters/free_per_iteration diff --git a/Documentation/ABI/testing/sysfs-platform-asus-wmi b/Documentation/ABI/testing/sysfs-platform-asus-wmi index 28144371a0f1a3..89acb6638df8a5 100644 --- a/Documentation/ABI/testing/sysfs-platform-asus-wmi +++ b/Documentation/ABI/testing/sysfs-platform-asus-wmi @@ -63,6 +63,7 @@ Date: Aug 2022 KernelVersion: 6.1 Contact: "Luke Jones" Description: + DEPRECATED, WILL BE REMOVED SOON: please use asus-armoury Switch the GPU hardware MUX mode. Laptops with this feature can can be toggled to boot with only the dGPU (discrete mode) or in standard Optimus/Hybrid mode. On switch a reboot is required: @@ -75,6 +76,7 @@ Date: Aug 2022 KernelVersion: 5.17 Contact: "Luke Jones" Description: + DEPRECATED, WILL BE REMOVED SOON: please use asus-armoury Disable discrete GPU: * 0 - Enable dGPU, * 1 - Disable dGPU @@ -84,6 +86,7 @@ Date: Aug 2022 KernelVersion: 5.17 Contact: "Luke Jones" Description: + DEPRECATED, WILL BE REMOVED SOON: please use asus-armoury Enable the external GPU paired with ROG X-Flow laptops. Toggling this setting will also trigger ACPI to disable the dGPU: @@ -95,6 +98,7 @@ Date: Aug 2022 KernelVersion: 5.17 Contact: "Luke Jones" Description: + DEPRECATED, WILL BE REMOVED SOON: please use asus-armoury Enable an LCD response-time boost to reduce or remove ghosting: * 0 - Disable, * 1 - Enable @@ -104,6 +108,7 @@ Date: Jun 2023 KernelVersion: 6.5 Contact: "Luke Jones" Description: + DEPRECATED, WILL BE REMOVED SOON: please use asus-armoury Get the current charging mode being used: * 1 - Barrel connected charger, * 2 - USB-C charging @@ -114,6 +119,7 @@ Date: Jun 2023 KernelVersion: 6.5 Contact: "Luke Jones" Description: + DEPRECATED, WILL BE REMOVED SOON: please use asus-armoury Show if the egpu (XG Mobile) is correctly connected: * 0 - False, * 1 - True @@ -123,6 +129,7 @@ Date: Jun 2023 KernelVersion: 6.5 Contact: "Luke Jones" Description: + DEPRECATED, WILL BE REMOVED SOON: please use asus-armoury Change the mini-LED mode: * 0 - Single-zone, * 1 - Multi-zone @@ -133,6 +140,7 @@ Date: Apr 2024 KernelVersion: 6.10 Contact: "Luke Jones" Description: + DEPRECATED, WILL BE REMOVED SOON: please use asus-armoury List the available mini-led modes. What: /sys/devices/platform//ppt_pl1_spl @@ -140,6 +148,7 @@ Date: Jun 2023 KernelVersion: 6.5 Contact: "Luke Jones" Description: + DEPRECATED, WILL BE REMOVED SOON: please use asus-armoury Set the Package Power Target total of CPU: PL1 on Intel, SPL on AMD. Shown on Intel+Nvidia or AMD+Nvidia based systems: @@ -150,6 +159,7 @@ Date: Jun 2023 KernelVersion: 6.5 Contact: "Luke Jones" Description: + DEPRECATED, WILL BE REMOVED SOON: please use asus-armoury Set the Slow Package Power Tracking Limit of CPU: PL2 on Intel, SPPT, on AMD. Shown on Intel+Nvidia or AMD+Nvidia based systems: @@ -160,6 +170,7 @@ Date: Jun 2023 KernelVersion: 6.5 Contact: "Luke Jones" Description: + DEPRECATED, WILL BE REMOVED SOON: please use asus-armoury Set the Fast Package Power Tracking Limit of CPU. AMD+Nvidia only: * min=5, max=250 @@ -168,6 +179,7 @@ Date: Jun 2023 KernelVersion: 6.5 Contact: "Luke Jones" Description: + DEPRECATED, WILL BE REMOVED SOON: please use asus-armoury Set the APU SPPT limit. Shown on full AMD systems only: * min=5, max=130 @@ -176,6 +188,7 @@ Date: Jun 2023 KernelVersion: 6.5 Contact: "Luke Jones" Description: + DEPRECATED, WILL BE REMOVED SOON: please use asus-armoury Set the platform SPPT limit. Shown on full AMD systems only: * min=5, max=130 @@ -184,6 +197,7 @@ Date: Jun 2023 KernelVersion: 6.5 Contact: "Luke Jones" Description: + DEPRECATED, WILL BE REMOVED SOON: please use asus-armoury Set the dynamic boost limit of the Nvidia dGPU: * min=5, max=25 @@ -192,6 +206,7 @@ Date: Jun 2023 KernelVersion: 6.5 Contact: "Luke Jones" Description: + DEPRECATED, WILL BE REMOVED SOON: please use asus-armoury Set the target temperature limit of the Nvidia dGPU: * min=75, max=87 @@ -200,6 +215,7 @@ Date: Apr 2024 KernelVersion: 6.10 Contact: "Luke Jones" Description: + DEPRECATED, WILL BE REMOVED SOON: please use asus-armoury Set if the BIOS POST sound is played on boot. * 0 - False, * 1 - True @@ -209,6 +225,7 @@ Date: Apr 2024 KernelVersion: 6.10 Contact: "Luke Jones" Description: + DEPRECATED, WILL BE REMOVED SOON: please use asus-armoury Set if the MCU can go in to low-power mode on system sleep * 0 - False, * 1 - True diff --git a/Documentation/ABI/testing/sysfs-platform-ayaneo-ec b/Documentation/ABI/testing/sysfs-platform-ayaneo-ec new file mode 100644 index 00000000000000..4cffbf5fc7cafc --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-ayaneo-ec @@ -0,0 +1,19 @@ +What: /sys/devices/platform/ayaneo-ec/controller_power +Date: Nov 2025 +KernelVersion: 6.19 +Contact: "Antheas Kapenekakis" +Description: + Current controller power state. Allows turning on and off + the controller power (e.g. for power savings). Write 1 to + turn on, 0 to turn off. File is readable and writable. + +What: /sys/devices/platform/ayaneo-ec/controller_modules +Date: Nov 2025 +KernelVersion: 6.19 +Contact: "Antheas Kapenekakis" +Description: + Shows which controller modules are currently connected to + the device. Possible values are "left", "right" and "both". + File is read-only. The Windows software for this device + will only set controller power to 1 if both module sides + are connected (i.e. this file returns "both"). diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power index 4d8e1ad020f05b..d38da077905a9d 100644 --- a/Documentation/ABI/testing/sysfs-power +++ b/Documentation/ABI/testing/sysfs-power @@ -454,3 +454,19 @@ Description: disables it. Reads from the file return the current value. The default is "1" if the build-time "SUSPEND_SKIP_SYNC" config flag is unset, or "0" otherwise. + +What: /sys/power/hibernate_compression_threads +Date: October 2025 +Contact: +Description: + Controls the number of threads used for compression + and decompression of hibernation images. + + The value can be adjusted at runtime to balance + performance and CPU utilization. + + The change takes effect on the next hibernation or + resume operation. + + Minimum value: 1 + Default value: 3 diff --git a/Documentation/Kconfig b/Documentation/Kconfig index 3a0e7ac0c4e324..8b6c4b84b2182f 100644 --- a/Documentation/Kconfig +++ b/Documentation/Kconfig @@ -19,7 +19,7 @@ config WARN_ABI_ERRORS described at Documentation/ABI/README. Yet, as they're manually written, it would be possible that some of those files would have errors that would break them for being parsed by - scripts/get_abi.pl. Add a check to verify them. + tools/docs/get_abi.py. Add a check to verify them. If unsure, select 'N'. diff --git a/Documentation/Makefile b/Documentation/Makefile index 3609cb86137b6e..e96ac6dcac4f1f 100644 --- a/Documentation/Makefile +++ b/Documentation/Makefile @@ -8,12 +8,12 @@ subdir- := devicetree/bindings ifneq ($(MAKECMDGOALS),cleandocs) # Check for broken documentation file references ifeq ($(CONFIG_WARN_MISSING_DOCUMENTS),y) -$(shell $(srctree)/scripts/documentation-file-ref-check --warn) +$(shell $(srctree)/tools/docs/documentation-file-ref-check --warn) endif # Check for broken ABI files ifeq ($(CONFIG_WARN_ABI_ERRORS),y) -$(shell $(srctree)/scripts/get_abi.py --dir $(srctree)/Documentation/ABI validate) +$(shell $(srctree)/tools/docs/get_abi.py --dir $(srctree)/Documentation/ABI validate) endif endif @@ -23,21 +23,22 @@ SPHINXOPTS = SPHINXDIRS = . DOCS_THEME = DOCS_CSS = -_SPHINXDIRS = $(sort $(patsubst $(srctree)/Documentation/%/index.rst,%,$(wildcard $(srctree)/Documentation/*/index.rst))) -SPHINX_CONF = conf.py +RUSTDOC = PAPER = BUILDDIR = $(obj)/output PDFLATEX = xelatex LATEXOPTS = -interaction=batchmode -no-shell-escape +PYTHONPYCACHEPREFIX ?= $(abspath $(BUILDDIR)/__pycache__) + +# Wrapper for sphinx-build + +BUILD_WRAPPER = $(srctree)/tools/docs/sphinx-build-wrapper + # For denylisting "variable font" files # Can be overridden by setting as an env variable FONTS_CONF_DENY_VF ?= $(HOME)/deny-vf -ifeq ($(findstring 1, $(KBUILD_VERBOSE)),) -SPHINXOPTS += "-q" -endif - # User-friendly check for sphinx-build HAVE_SPHINX := $(shell if which $(SPHINXBUILD) >/dev/null 2>&1; then echo 1; else echo 0; fi) @@ -46,141 +47,46 @@ ifeq ($(HAVE_SPHINX),0) .DEFAULT: $(warning The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed and in PATH, or set the SPHINXBUILD make variable to point to the full path of the '$(SPHINXBUILD)' executable.) @echo - @$(srctree)/scripts/sphinx-pre-install + @$(srctree)/tools/docs/sphinx-pre-install @echo " SKIP Sphinx $@ target." else # HAVE_SPHINX -# User-friendly check for pdflatex and latexmk -HAVE_PDFLATEX := $(shell if which $(PDFLATEX) >/dev/null 2>&1; then echo 1; else echo 0; fi) -HAVE_LATEXMK := $(shell if which latexmk >/dev/null 2>&1; then echo 1; else echo 0; fi) - -ifeq ($(HAVE_LATEXMK),1) - PDFLATEX := latexmk -$(PDFLATEX) -endif #HAVE_LATEXMK - -# Internal variables. -PAPEROPT_a4 = -D latex_elements.papersize=a4paper -PAPEROPT_letter = -D latex_elements.papersize=letterpaper -ALLSPHINXOPTS = -D kerneldoc_srctree=$(srctree) -D kerneldoc_bin=$(KERNELDOC) -ALLSPHINXOPTS += $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) -ifneq ($(wildcard $(srctree)/.config),) -ifeq ($(CONFIG_RUST),y) - # Let Sphinx know we will include rustdoc - ALLSPHINXOPTS += -t rustdoc -endif -endif -# the i18n builder cannot share the environment and doctrees with the others -I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) . +# Common documentation targets +htmldocs mandocs infodocs texinfodocs latexdocs epubdocs xmldocs pdfdocs linkcheckdocs: + $(Q)PYTHONPYCACHEPREFIX="$(PYTHONPYCACHEPREFIX)" \ + $(srctree)/tools/docs/sphinx-pre-install --version-check + +$(Q)PYTHONPYCACHEPREFIX="$(PYTHONPYCACHEPREFIX)" \ + $(PYTHON3) $(BUILD_WRAPPER) $@ \ + --sphinxdirs="$(SPHINXDIRS)" $(RUSTDOC) \ + --builddir="$(BUILDDIR)" --deny-vf=$(FONTS_CONF_DENY_VF) \ + --theme=$(DOCS_THEME) --css=$(DOCS_CSS) --paper=$(PAPER) -# commands; the 'cmd' from scripts/Kbuild.include is not *loopable* -loop_cmd = $(echo-cmd) $(cmd_$(1)) || exit; -# $2 sphinx builder e.g. "html" -# $3 name of the build subfolder / e.g. "userspace-api/media", used as: -# * dest folder relative to $(BUILDDIR) and -# * cache folder relative to $(BUILDDIR)/.doctrees -# $4 dest subfolder e.g. "man" for man pages at userspace-api/media/man -# $5 reST source folder relative to $(src), -# e.g. "userspace-api/media" for the linux-tv book-set at ./Documentation/userspace-api/media - -PYTHONPYCACHEPREFIX ?= $(abspath $(BUILDDIR)/__pycache__) - -quiet_cmd_sphinx = SPHINX $@ --> file://$(abspath $(BUILDDIR)/$3/$4) - cmd_sphinx = \ - PYTHONPYCACHEPREFIX="$(PYTHONPYCACHEPREFIX)" \ - BUILDDIR=$(abspath $(BUILDDIR)) SPHINX_CONF=$(abspath $(src)/$5/$(SPHINX_CONF)) \ - $(PYTHON3) $(srctree)/scripts/jobserver-exec \ - $(CONFIG_SHELL) $(srctree)/Documentation/sphinx/parallel-wrapper.sh \ - $(SPHINXBUILD) \ - -b $2 \ - -c $(abspath $(src)) \ - -d $(abspath $(BUILDDIR)/.doctrees/$3) \ - -D version=$(KERNELVERSION) -D release=$(KERNELRELEASE) \ - $(ALLSPHINXOPTS) \ - $(abspath $(src)/$5) \ - $(abspath $(BUILDDIR)/$3/$4) && \ - if [ "x$(DOCS_CSS)" != "x" ]; then \ - cp $(if $(patsubst /%,,$(DOCS_CSS)),$(abspath $(srctree)/$(DOCS_CSS)),$(DOCS_CSS)) $(BUILDDIR)/$3/_static/; \ - fi - -htmldocs: - @$(srctree)/scripts/sphinx-pre-install --version-check - @+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,html,$(var),,$(var))) - -htmldocs-redirects: $(srctree)/Documentation/.renames.txt - @tools/docs/gen-redirects.py --output $(BUILDDIR) < $< - -# If Rust support is available and .config exists, add rustdoc generated contents. -# If there are any, the errors from this make rustdoc will be displayed but -# won't stop the execution of htmldocs - -ifneq ($(wildcard $(srctree)/.config),) -ifeq ($(CONFIG_RUST),y) - $(Q)$(MAKE) rustdoc || true -endif endif -texinfodocs: - @$(srctree)/scripts/sphinx-pre-install --version-check - @+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,texinfo,$(var),texinfo,$(var))) - -# Note: the 'info' Make target is generated by sphinx itself when -# running the texinfodocs target define above. -infodocs: texinfodocs - $(MAKE) -C $(BUILDDIR)/texinfo info - -linkcheckdocs: - @$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,linkcheck,$(var),,$(var))) - -latexdocs: - @$(srctree)/scripts/sphinx-pre-install --version-check - @+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,latex,$(var),latex,$(var))) - -ifeq ($(HAVE_PDFLATEX),0) - -pdfdocs: - $(warning The '$(PDFLATEX)' command was not found. Make sure you have it installed and in PATH to produce PDF output.) - @echo " SKIP Sphinx $@ target." - -else # HAVE_PDFLATEX - -pdfdocs: DENY_VF = XDG_CONFIG_HOME=$(FONTS_CONF_DENY_VF) -pdfdocs: latexdocs - @$(srctree)/scripts/sphinx-pre-install --version-check - $(foreach var,$(SPHINXDIRS), \ - $(MAKE) PDFLATEX="$(PDFLATEX)" LATEXOPTS="$(LATEXOPTS)" $(DENY_VF) -C $(BUILDDIR)/$(var)/latex || sh $(srctree)/scripts/check-variable-fonts.sh || exit; \ - mkdir -p $(BUILDDIR)/$(var)/pdf; \ - mv $(subst .tex,.pdf,$(wildcard $(BUILDDIR)/$(var)/latex/*.tex)) $(BUILDDIR)/$(var)/pdf/; \ - ) - -endif # HAVE_PDFLATEX - -epubdocs: - @$(srctree)/scripts/sphinx-pre-install --version-check - @+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,epub,$(var),epub,$(var))) - -xmldocs: - @$(srctree)/scripts/sphinx-pre-install --version-check - @+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,xml,$(var),xml,$(var))) - -endif # HAVE_SPHINX - # The following targets are independent of HAVE_SPHINX, and the rules should # work or silently pass without Sphinx. +htmldocs-redirects: $(srctree)/Documentation/.renames.txt + @tools/docs/gen-redirects.py --output $(BUILDDIR) < $< + refcheckdocs: - $(Q)cd $(srctree);scripts/documentation-file-ref-check + $(Q)cd $(srctree); tools/docs/documentation-file-ref-check cleandocs: $(Q)rm -rf $(BUILDDIR) +# Used only on help +_SPHINXDIRS = $(shell printf "%s\n" $(patsubst $(srctree)/Documentation/%/index.rst,%,$(wildcard $(srctree)/Documentation/*/index.rst)) | sort -f) + dochelp: @echo ' Linux kernel internal documentation in different formats from ReST:' @echo ' htmldocs - HTML' @echo ' htmldocs-redirects - generate HTML redirects for moved pages' @echo ' texinfodocs - Texinfo' @echo ' infodocs - Info' + @echo ' mandocs - Man pages' @echo ' latexdocs - LaTeX' @echo ' pdfdocs - PDF' @echo ' epubdocs - EPUB' @@ -192,13 +98,17 @@ dochelp: @echo ' cleandocs - clean all generated files' @echo @echo ' make SPHINXDIRS="s1 s2" [target] Generate only docs of folder s1, s2' - @echo ' valid values for SPHINXDIRS are: $(_SPHINXDIRS)' - @echo - @echo ' make SPHINX_CONF={conf-file} [target] use *additional* sphinx-build' - @echo ' configuration. This is e.g. useful to build with nit-picking config.' + @echo ' top level values for SPHINXDIRS are: $(_SPHINXDIRS)' + @echo ' you may also use a subdirectory like SPHINXDIRS=userspace-api/media,' + @echo ' provided that there is an index.rst file at the subdirectory.' @echo @echo ' make DOCS_THEME={sphinx-theme} selects a different Sphinx theme.' @echo @echo ' make DOCS_CSS={a .css file} adds a DOCS_CSS override file for html/epub output.' @echo + @echo ' make PAPER={a4|letter} Specifies the paper size used for LaTeX/PDF output.' + @echo + @echo ' make FONTS_CONF_DENY_VF={path} sets a deny list to block variable Noto CJK fonts' + @echo ' for PDF build. See tools/lib/python/kdoc/latex_fonts.py for more details' + @echo @echo ' Default location for the generated documents is Documentation/output' diff --git a/Documentation/PCI/pci-error-recovery.rst b/Documentation/PCI/pci-error-recovery.rst index 5df481ac6193d8..43bc4e3665b477 100644 --- a/Documentation/PCI/pci-error-recovery.rst +++ b/Documentation/PCI/pci-error-recovery.rst @@ -326,6 +326,21 @@ be recovered, there is nothing more that can be done; the platform will typically report a "permanent failure" in such a case. The device will be considered "dead" in this case. +Drivers typically need to call pci_restore_state() after reset to +re-initialize the device's config space registers and thereby +bring it from D0\ :sub:`uninitialized` into D0\ :sub:`active` state +(PCIe r7.0 sec 5.3.1.1). The PCI core invokes pci_save_state() +on enumeration after initializing config space to ensure that a +saved state is available for subsequent error recovery. +Drivers which modify config space on probe may need to invoke +pci_save_state() afterwards to record those changes for later +error recovery. When going into system suspend, pci_save_state() +is called for every PCI device and that state will be restored +not only on resume, but also on any subsequent error recovery. +In the unlikely event that the saved state recorded on suspend +is unsuitable for error recovery, drivers should call +pci_save_state() on resume. + Drivers for multi-function cards will need to coordinate among themselves as to which driver instance will perform any "one-shot" or global device initialization. For example, the Symbios sym53cxx2 diff --git a/Documentation/RCU/Design/Requirements/Requirements.rst b/Documentation/RCU/Design/Requirements/Requirements.rst index f24b3c0b9b0dc6..ba417a08b93dfb 100644 --- a/Documentation/RCU/Design/Requirements/Requirements.rst +++ b/Documentation/RCU/Design/Requirements/Requirements.rst @@ -2637,15 +2637,16 @@ synchronize_srcu() for some other domain ``ss1``, and if an that was held across as ``ss``-domain synchronize_srcu(), deadlock would again be possible. Such a deadlock cycle could extend across an arbitrarily large number of different SRCU domains. Again, with great -power comes great responsibility. +power comes great responsibility, though lockdep is now able to detect +this sort of deadlock. -Unlike the other RCU flavors, SRCU read-side critical sections can run -on idle and even offline CPUs. This ability requires that -srcu_read_lock() and srcu_read_unlock() contain memory barriers, -which means that SRCU readers will run a bit slower than would RCU -readers. It also motivates the smp_mb__after_srcu_read_unlock() API, -which, in combination with srcu_read_unlock(), guarantees a full -memory barrier. +Unlike the other RCU flavors, SRCU read-side critical sections can run on +idle and even offline CPUs, with the exception of srcu_read_lock_fast() +and friends. This ability requires that srcu_read_lock() and +srcu_read_unlock() contain memory barriers, which means that SRCU +readers will run a bit slower than would RCU readers. It also motivates +the smp_mb__after_srcu_read_unlock() API, which, in combination with +srcu_read_unlock(), guarantees a full memory barrier. Also unlike other RCU flavors, synchronize_srcu() may **not** be invoked from CPU-hotplug notifiers, due to the fact that SRCU grace @@ -2681,15 +2682,15 @@ run some tests first. SRCU just might need a few adjustment to deal with that sort of load. Of course, your mileage may vary based on the speed of your CPUs and the size of your memory. -The `SRCU -API `__ +The `SRCU API +`__ includes srcu_read_lock(), srcu_read_unlock(), -srcu_dereference(), srcu_dereference_check(), -synchronize_srcu(), synchronize_srcu_expedited(), -call_srcu(), srcu_barrier(), and srcu_read_lock_held(). It -also includes DEFINE_SRCU(), DEFINE_STATIC_SRCU(), and -init_srcu_struct() APIs for defining and initializing -``srcu_struct`` structures. +srcu_dereference(), srcu_dereference_check(), synchronize_srcu(), +synchronize_srcu_expedited(), call_srcu(), srcu_barrier(), +and srcu_read_lock_held(). It also includes DEFINE_SRCU(), +DEFINE_STATIC_SRCU(), DEFINE_SRCU_FAST(), DEFINE_STATIC_SRCU_FAST(), +init_srcu_struct(), and init_srcu_struct_fast() APIs for defining and +initializing ``srcu_struct`` structures. More recently, the SRCU API has added polling interfaces: diff --git a/Documentation/RCU/checklist.rst b/Documentation/RCU/checklist.rst index c9bfb2b218e525..4b30f701225fdb 100644 --- a/Documentation/RCU/checklist.rst +++ b/Documentation/RCU/checklist.rst @@ -417,11 +417,13 @@ over a rather long period of time, but improvements are always welcome! you should be using RCU rather than SRCU, because RCU is almost always faster and easier to use than is SRCU. - Also unlike other forms of RCU, explicit initialization and - cleanup is required either at build time via DEFINE_SRCU() - or DEFINE_STATIC_SRCU() or at runtime via init_srcu_struct() - and cleanup_srcu_struct(). These last two are passed a - "struct srcu_struct" that defines the scope of a given + Also unlike other forms of RCU, explicit initialization + and cleanup is required either at build time via + DEFINE_SRCU(), DEFINE_STATIC_SRCU(), DEFINE_SRCU_FAST(), + or DEFINE_STATIC_SRCU_FAST() or at runtime via either + init_srcu_struct() or init_srcu_struct_fast() and + cleanup_srcu_struct(). These last three are passed a + `struct srcu_struct` that defines the scope of a given SRCU domain. Once initialized, the srcu_struct is passed to srcu_read_lock(), srcu_read_unlock() synchronize_srcu(), synchronize_srcu_expedited(), and call_srcu(). A given diff --git a/Documentation/RCU/whatisRCU.rst b/Documentation/RCU/whatisRCU.rst index cf0b0ac9f4636a..a1582bd653d115 100644 --- a/Documentation/RCU/whatisRCU.rst +++ b/Documentation/RCU/whatisRCU.rst @@ -1227,7 +1227,10 @@ SRCU: Initialization/cleanup/ordering:: DEFINE_SRCU DEFINE_STATIC_SRCU + DEFINE_SRCU_FAST // for srcu_read_lock_fast() and friends + DEFINE_STATIC_SRCU_FAST // for srcu_read_lock_fast() and friends init_srcu_struct + init_srcu_struct_fast cleanup_srcu_struct smp_mb__after_srcu_read_unlock diff --git a/Documentation/accel/qaic/aic100.rst b/Documentation/accel/qaic/aic100.rst index 273da6192fb346..41331cf580b118 100644 --- a/Documentation/accel/qaic/aic100.rst +++ b/Documentation/accel/qaic/aic100.rst @@ -487,8 +487,8 @@ one user crashes, the fallout of that should be limited to that workload and not impact other workloads. SSR accomplishes this. If a particular workload crashes, QSM notifies the host via the QAIC_SSR MHI -channel. This notification identifies the workload by it's assigned DBC. A -multi-stage recovery process is then used to cleanup both sides, and get the +channel. This notification identifies the workload by its assigned DBC. A +multi-stage recovery process is then used to cleanup both sides, and gets the DBC/NSPs into a working state. When SSR occurs, any state in the workload is lost. Any inputs that were in @@ -496,6 +496,27 @@ process, or queued by not yet serviced, are lost. The loaded artifacts will remain in on-card DDR, but the host will need to re-activate the workload if it desires to recover the workload. +When SSR occurs for a specific NSP, the assigned DBC goes through the +following state transactions in order: + +DBC_STATE_BEFORE_SHUTDOWN + Indicates that the affected NSP was found in an unrecoverable error + condition. +DBC_STATE_AFTER_SHUTDOWN + Indicates that the NSP is under reset. +DBC_STATE_BEFORE_POWER_UP + Indicates that the NSP's debug information has been collected, and is + ready to be collected by the host (if desired). At that stage the NSP + is restarted by QSM. +DBC_STATE_AFTER_POWER_UP + Indicates that the NSP has been restarted, fully operational and is + in idle state. + +SSR also has an optional crashdump collection feature. If enabled, the host can +collect the memory dump for the crashed NSP and dump it to the user space via +the dev_coredump subsystem. The host can also decline the crashdump collection +request from the device. + Reliability, Accessibility, Serviceability (RAS) ================================================ diff --git a/Documentation/accel/qaic/qaic.rst b/Documentation/accel/qaic/qaic.rst index 018d6cc173d7e9..ef27e262cb9141 100644 --- a/Documentation/accel/qaic/qaic.rst +++ b/Documentation/accel/qaic/qaic.rst @@ -36,7 +36,7 @@ polling mode and reenables the IRQ line. This mitigation in QAIC is very effective. The same lprnet usecase that generates 100k IRQs per second (per /proc/interrupts) is reduced to roughly 64 IRQs over 5 minutes while keeping the host system stable, and having the same -workload throughput performance (within run to run noise variation). +workload throughput performance (within run-to-run noise variation). Single MSI Mode --------------- @@ -49,7 +49,7 @@ useful to be able to fall back to a single MSI when needed. To support this fallback, we allow the case where only one MSI is able to be allocated, and share that one MSI between MHI and the DBCs. The device detects when only one MSI has been configured and directs the interrupts for the DBCs -to the interrupt normally used for MHI. Unfortunately this means that the +to the interrupt normally used for MHI. Unfortunately, this means that the interrupt handlers for every DBC and MHI wake up for every interrupt that arrives; however, the DBC threaded irq handlers only are started when work to be done is detected (MHI will always start its threaded handler). @@ -62,9 +62,9 @@ never disabled, allowing each new entry to the FIFO to trigger a new interrupt. Neural Network Control (NNC) Protocol ===================================== -The implementation of NNC is split between the KMD (QAIC) and UMD. In general +The implementation of NNC is split between the KMD (QAIC) and UMD. In general, QAIC understands how to encode/decode NNC wire protocol, and elements of the -protocol which require kernel space knowledge to process (for example, mapping +protocol which requires kernel space knowledge to process (for example, mapping host memory to device IOVAs). QAIC understands the structure of a message, and all of the transactions. QAIC does not understand commands (the payload of a passthrough transaction). diff --git a/Documentation/accounting/taskstats.rst b/Documentation/accounting/taskstats.rst index 2a28b7f55c103e..173c1e7bf5efa4 100644 --- a/Documentation/accounting/taskstats.rst +++ b/Documentation/accounting/taskstats.rst @@ -76,41 +76,43 @@ The messages are in the format:: The taskstats payload is one of the following three kinds: 1. Commands: Sent from user to kernel. Commands to get data on -a pid/tgid consist of one attribute, of type TASKSTATS_CMD_ATTR_PID/TGID, -containing a u32 pid or tgid in the attribute payload. The pid/tgid denotes -the task/process for which userspace wants statistics. - -Commands to register/deregister interest in exit data from a set of cpus -consist of one attribute, of type -TASKSTATS_CMD_ATTR_REGISTER/DEREGISTER_CPUMASK and contain a cpumask in the -attribute payload. The cpumask is specified as an ascii string of -comma-separated cpu ranges e.g. to listen to exit data from cpus 1,2,3,5,7,8 -the cpumask would be "1-3,5,7-8". If userspace forgets to deregister interest -in cpus before closing the listening socket, the kernel cleans up its interest -set over time. However, for the sake of efficiency, an explicit deregistration -is advisable. + a pid/tgid consist of one attribute, of type TASKSTATS_CMD_ATTR_PID/TGID, + containing a u32 pid or tgid in the attribute payload. The pid/tgid denotes + the task/process for which userspace wants statistics. + + Commands to register/deregister interest in exit data from a set of cpus + consist of one attribute, of type + TASKSTATS_CMD_ATTR_REGISTER/DEREGISTER_CPUMASK and contain a cpumask in the + attribute payload. The cpumask is specified as an ascii string of + comma-separated cpu ranges e.g. to listen to exit data from cpus 1,2,3,5,7,8 + the cpumask would be "1-3,5,7-8". If userspace forgets to deregister + interest in cpus before closing the listening socket, the kernel cleans up + its interest set over time. However, for the sake of efficiency, an explicit + deregistration is advisable. 2. Response for a command: sent from the kernel in response to a userspace -command. The payload is a series of three attributes of type: + command. The payload is a series of three attributes of type: -a) TASKSTATS_TYPE_AGGR_PID/TGID : attribute containing no payload but indicates -a pid/tgid will be followed by some stats. + a) TASKSTATS_TYPE_AGGR_PID/TGID: attribute containing no payload but + indicates a pid/tgid will be followed by some stats. -b) TASKSTATS_TYPE_PID/TGID: attribute whose payload is the pid/tgid whose stats -are being returned. + b) TASKSTATS_TYPE_PID/TGID: attribute whose payload is the pid/tgid whose + stats are being returned. -c) TASKSTATS_TYPE_STATS: attribute with a struct taskstats as payload. The -same structure is used for both per-pid and per-tgid stats. + c) TASKSTATS_TYPE_STATS: attribute with a struct taskstats as payload. The + same structure is used for both per-pid and per-tgid stats. 3. New message sent by kernel whenever a task exits. The payload consists of a series of attributes of the following type: -a) TASKSTATS_TYPE_AGGR_PID: indicates next two attributes will be pid+stats -b) TASKSTATS_TYPE_PID: contains exiting task's pid -c) TASKSTATS_TYPE_STATS: contains the exiting task's per-pid stats -d) TASKSTATS_TYPE_AGGR_TGID: indicates next two attributes will be tgid+stats -e) TASKSTATS_TYPE_TGID: contains tgid of process to which task belongs -f) TASKSTATS_TYPE_STATS: contains the per-tgid stats for exiting task's process + a) TASKSTATS_TYPE_AGGR_PID: indicates next two attributes will be pid+stats + b) TASKSTATS_TYPE_PID: contains exiting task's pid + c) TASKSTATS_TYPE_STATS: contains the exiting task's per-pid stats + d) TASKSTATS_TYPE_AGGR_TGID: indicates next two attributes will be + tgid+stats + e) TASKSTATS_TYPE_TGID: contains tgid of process to which task belongs + f) TASKSTATS_TYPE_STATS: contains the per-tgid stats for exiting task's + process per-tgid stats diff --git a/Documentation/admin-guide/LSM/Smack.rst b/Documentation/admin-guide/LSM/Smack.rst index 6d44f4fdbf59ff..c5ed775f2d107b 100644 --- a/Documentation/admin-guide/LSM/Smack.rst +++ b/Documentation/admin-guide/LSM/Smack.rst @@ -601,10 +601,15 @@ specification. Task Attribute ~~~~~~~~~~~~~~ -The Smack label of a process can be read from /proc//attr/current. A -process can read its own Smack label from /proc/self/attr/current. A +The Smack label of a process can be read from ``/proc//attr/current``. A +process can read its own Smack label from ``/proc/self/attr/current``. A privileged process can change its own Smack label by writing to -/proc/self/attr/current but not the label of another process. +``/proc/self/attr/current`` but not the label of another process. + +Format of writing is : only the label or the label followed by one of the +3 trailers: ``\n`` (by common agreement for ``/proc/...`` interfaces), +``\0`` (because some applications incorrectly include it), +``\n\0`` (because we think some applications may incorrectly include it). File Attribute ~~~~~~~~~~~~~~ @@ -696,6 +701,11 @@ sockets. A privileged program may set this to match the label of another task with which it hopes to communicate. +UNIX domain socket (UDS) with a BSD address functions both as a file in a +filesystem and as a socket. As a file, it carries the SMACK64 attribute. This +attribute is not involved in Smack security enforcement and is immutably +assigned the label "*". + Smack Netlabel Exceptions ~~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/admin-guide/LSM/ipe.rst b/Documentation/admin-guide/LSM/ipe.rst index dc7088451f9d9d..a756d81585317c 100644 --- a/Documentation/admin-guide/LSM/ipe.rst +++ b/Documentation/admin-guide/LSM/ipe.rst @@ -95,7 +95,20 @@ languages when these scripts are invoked by passing these program files to the interpreter. This is because the way interpreters execute these files; the scripts themselves are not evaluated as executable code through one of IPE's hooks, but they are merely text files that are read -(as opposed to compiled executables) [#interpreters]_. +(as opposed to compiled executables). However, with the introduction of the +``AT_EXECVE_CHECK`` flag (:doc:`AT_EXECVE_CHECK `), +interpreters can use it to signal the kernel that a script file will be executed, +and request the kernel to perform LSM security checks on it. + +IPE's EXECUTE operation enforcement differs between compiled executables and +interpreted scripts: For compiled executables, enforcement is triggered +automatically by the kernel during ``execve()``, ``execveat()``, ``mmap()`` +and ``mprotect()`` syscalls when loading executable content. For interpreted +scripts, enforcement requires explicit interpreter integration using +``execveat()`` with ``AT_EXECVE_CHECK`` flag. Unlike exec syscalls that IPE +intercepts during the execution process, this mechanism needs the interpreter +to take the initiative, and existing interpreters won't be automatically +supported unless the signal call is added. Threat Model ------------ @@ -806,8 +819,6 @@ A: .. [#digest_cache_lsm] https://lore.kernel.org/lkml/20240415142436.2545003-1-roberto.sassu@huaweicloud.com/ -.. [#interpreters] There is `some interest in solving this issue `_. - .. [#devdoc] Please see :doc:`the design docs ` for more on this topic. diff --git a/Documentation/admin-guide/RAS/main.rst b/Documentation/admin-guide/RAS/main.rst index 447bfde509fb6b..5a45db32c49b09 100644 --- a/Documentation/admin-guide/RAS/main.rst +++ b/Documentation/admin-guide/RAS/main.rst @@ -406,24 +406,8 @@ index of the MC:: |->mc2 .... -Under each ``mcX`` directory each ``csrowX`` is again represented by a -``csrowX``, where ``X`` is the csrow index:: - - .../mc/mc0/ - | - |->csrow0 - |->csrow2 - |->csrow3 - .... - -Notice that there is no csrow1, which indicates that csrow0 is composed -of a single ranked DIMMs. This should also apply in both Channels, in -order to have dual-channel mode be operational. Since both csrow2 and -csrow3 are populated, this indicates a dual ranked set of DIMMs for -channels 0 and 1. - -Within each of the ``mcX`` and ``csrowX`` directories are several EDAC -control and attribute files. +Within each of the ``mcX`` directory are several EDAC control and +attribute files. ``mcX`` directories ------------------- @@ -569,7 +553,7 @@ this ``X`` memory module: - Unbuffered-DDR .. [#f5] On some systems, the memory controller doesn't have any logic - to identify the memory module. On such systems, the directory is called ``rankX`` and works on a similar way as the ``csrowX`` directories. + to identify the memory module. On such systems, the directory is called ``rankX``. On modern Intel memory controllers, the memory controller identifies the memory modules directly. On such systems, the directory is called ``dimmX``. @@ -577,126 +561,6 @@ this ``X`` memory module: symlinks inside the sysfs mapping that are automatically created by the sysfs subsystem. Currently, they serve no purpose. -``csrowX`` directories ----------------------- - -When CONFIG_EDAC_LEGACY_SYSFS is enabled, sysfs will contain the ``csrowX`` -directories. As this API doesn't work properly for Rambus, FB-DIMMs and -modern Intel Memory Controllers, this is being deprecated in favor of -``dimmX`` directories. - -In the ``csrowX`` directories are EDAC control and attribute files for -this ``X`` instance of csrow: - - -- ``ue_count`` - Total Uncorrectable Errors count attribute file - - This attribute file displays the total count of uncorrectable - errors that have occurred on this csrow. If panic_on_ue is set - this counter will not have a chance to increment, since EDAC - will panic the system. - - -- ``ce_count`` - Total Correctable Errors count attribute file - - This attribute file displays the total count of correctable - errors that have occurred on this csrow. This count is very - important to examine. CEs provide early indications that a - DIMM is beginning to fail. This count field should be - monitored for non-zero values and report such information - to the system administrator. - - -- ``size_mb`` - Total memory managed by this csrow attribute file - - This attribute file displays, in count of megabytes, the memory - that this csrow contains. - - -- ``mem_type`` - Memory Type attribute file - - This attribute file will display what type of memory is currently - on this csrow. Normally, either buffered or unbuffered memory. - Examples: - - - Registered-DDR - - Unbuffered-DDR - - -- ``edac_mode`` - EDAC Mode of operation attribute file - - This attribute file will display what type of Error detection - and correction is being utilized. - - -- ``dev_type`` - Device type attribute file - - This attribute file will display what type of DRAM device is - being utilized on this DIMM. - Examples: - - - x1 - - x2 - - x4 - - x8 - - -- ``ch0_ce_count`` - Channel 0 CE Count attribute file - - This attribute file will display the count of CEs on this - DIMM located in channel 0. - - -- ``ch0_ue_count`` - Channel 0 UE Count attribute file - - This attribute file will display the count of UEs on this - DIMM located in channel 0. - - -- ``ch0_dimm_label`` - Channel 0 DIMM Label control file - - - This control file allows this DIMM to have a label assigned - to it. With this label in the module, when errors occur - the output can provide the DIMM label in the system log. - This becomes vital for panic events to isolate the - cause of the UE event. - - DIMM Labels must be assigned after booting, with information - that correctly identifies the physical slot with its - silk screen label. This information is currently very - motherboard specific and determination of this information - must occur in userland at this time. - - -- ``ch1_ce_count`` - Channel 1 CE Count attribute file - - - This attribute file will display the count of CEs on this - DIMM located in channel 1. - - -- ``ch1_ue_count`` - Channel 1 UE Count attribute file - - - This attribute file will display the count of UEs on this - DIMM located in channel 0. - - -- ``ch1_dimm_label`` - Channel 1 DIMM Label control file - - This control file allows this DIMM to have a label assigned - to it. With this label in the module, when errors occur - the output can provide the DIMM label in the system log. - This becomes vital for panic events to isolate the - cause of the UE event. - - DIMM Labels must be assigned after booting, with information - that correctly identifies the physical slot with its - silk screen label. This information is currently very - motherboard specific and determination of this information - must occur in userland at this time. - System Logging -------------- diff --git a/Documentation/admin-guide/bcache.rst b/Documentation/admin-guide/bcache.rst index 6fdb495ac46652..f71f349553e426 100644 --- a/Documentation/admin-guide/bcache.rst +++ b/Documentation/admin-guide/bcache.rst @@ -17,8 +17,7 @@ The latest bcache kernel code can be found from mainline Linux kernel: It's designed around the performance characteristics of SSDs - it only allocates in erase block sized buckets, and it uses a hybrid btree/log to track cached extents (which can be anywhere from a single sector to the bucket size). It's -designed to avoid random writes at all costs; it fills up an erase block -sequentially, then issues a discard before reusing it. +designed to avoid random writes at all costs. Both writethrough and writeback caching are supported. Writeback defaults to off, but can be switched on and off arbitrarily at runtime. Bcache goes to @@ -618,19 +617,11 @@ bucket_size cache_replacement_policy One of either lru, fifo or random. -discard - Boolean; if on a discard/TRIM will be issued to each bucket before it is - reused. Defaults to off, since SATA TRIM is an unqueued command (and thus - slow). - freelist_percent Size of the freelist as a percentage of nbuckets. Can be written to to increase the number of buckets kept on the freelist, which lets you artificially reduce the size of the cache at runtime. Mostly for testing - purposes (i.e. testing how different size caches affect your hit rate), but - since buckets are discarded when they move on to the freelist will also make - the SSD's garbage collection easier by effectively giving it more reserved - space. + purposes (i.e. testing how different size caches affect your hit rate). io_errors Number of errors that have occurred, decayed by io_error_halflife. diff --git a/Documentation/admin-guide/blockdev/zoned_loop.rst b/Documentation/admin-guide/blockdev/zoned_loop.rst index 64dcfde7450af5..6aa865424ac383 100644 --- a/Documentation/admin-guide/blockdev/zoned_loop.rst +++ b/Documentation/admin-guide/blockdev/zoned_loop.rst @@ -68,30 +68,43 @@ The options available for the add command can be listed by reading the In more details, the options that can be used with the "add" command are as follows. -================ =========================================================== -id Device number (the X in /dev/zloopX). - Default: automatically assigned. -capacity_mb Device total capacity in MiB. This is always rounded up to - the nearest higher multiple of the zone size. - Default: 16384 MiB (16 GiB). -zone_size_mb Device zone size in MiB. Default: 256 MiB. -zone_capacity_mb Device zone capacity (must always be equal to or lower than - the zone size. Default: zone size. -conv_zones Total number of conventioanl zones starting from sector 0. - Default: 8. -base_dir Path to the base directory where to create the directory - containing the zone files of the device. - Default=/var/local/zloop. - The device directory containing the zone files is always - named with the device ID. E.g. the default zone file - directory for /dev/zloop0 is /var/local/zloop/0. -nr_queues Number of I/O queues of the zoned block device. This value is - always capped by the number of online CPUs - Default: 1 -queue_depth Maximum I/O queue depth per I/O queue. - Default: 64 -buffered_io Do buffered IOs instead of direct IOs (default: false) -================ =========================================================== +=================== ========================================================= +id Device number (the X in /dev/zloopX). + Default: automatically assigned. +capacity_mb Device total capacity in MiB. This is always rounded up + to the nearest higher multiple of the zone size. + Default: 16384 MiB (16 GiB). +zone_size_mb Device zone size in MiB. Default: 256 MiB. +zone_capacity_mb Device zone capacity (must always be equal to or lower + than the zone size. Default: zone size. +conv_zones Total number of conventioanl zones starting from + sector 0 + Default: 8 +base_dir Path to the base directory where to create the directory + containing the zone files of the device. + Default=/var/local/zloop. + The device directory containing the zone files is always + named with the device ID. E.g. the default zone file + directory for /dev/zloop0 is /var/local/zloop/0. +nr_queues Number of I/O queues of the zoned block device. This + value is always capped by the number of online CPUs + Default: 1 +queue_depth Maximum I/O queue depth per I/O queue. + Default: 64 +buffered_io Do buffered IOs instead of direct IOs (default: false) +zone_append Enable or disable a zloop device native zone append + support. + Default: 1 (enabled). + If native zone append support is disabled, the block layer + will emulate this operation using regular write + operations. +ordered_zone_append Enable zloop mitigation of zone append reordering. + Default: disabled. + This is useful for testing file systems file data mapping + (extents), as when enabled, this can significantly reduce + the number of data extents needed to for a file data + mapping. +=================== ========================================================= 3) Deleting a Zoned Device -------------------------- @@ -121,7 +134,7 @@ MB and a zone capacity of 63 MB:: $ modprobe zloop $ mkdir -p /var/local/zloop/0 - $ echo "add capacity_mb=2048,zone_size_mb=64,zone_capacity=63MB" > /dev/zloop-control + $ echo "add capacity_mb=2048,zone_size_mb=64,zone_capacity_mb=63" > /dev/zloop-control For the device created (/dev/zloop0), the zone backing files are all created under the default base directory (/var/local/zloop):: diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst index 0e6c67ac585a08..7f5b59d95fce5c 100644 --- a/Documentation/admin-guide/cgroup-v2.rst +++ b/Documentation/admin-guide/cgroup-v2.rst @@ -53,7 +53,8 @@ v1 is available under :ref:`Documentation/admin-guide/cgroup-v1/index.rst raid1 with N >= 2 mirrors +raid0 -> raid4 (add dedicated parity device) +raid0 -> raid5 (add dedicated parity device) +raid0 -> raid10 with near layout and N >= 2 mirror groups (raid0 stripes have to become first member within mirror groups) +raid1 -> linear +raid1 -> raid5 with 2 mirrors +raid4 -> raid5 w/ rotating parity +raid5 with dedicated parity device -> raid4 +raid5 -> raid6 (with dedicated Q-syndrome) +raid6 (with dedicated Q-syndrome) -> raid5 +raid10 with near layout and even number of disks -> raid0 (select any in-sync device from each mirror group) + +Reshape: +linear: not possible +raid0: not possible +raid1: change number of mirrors +raid4: add and remove stripes (minimum 3), change stripesize +raid5: add and remove stripes (minimum 3, special case 2 for raid1 takeover), change rotating parity algorithms, change stripesize +raid6: add and remove stripes (minimum 4), change rotating syndrome algorithms, change stripesize +raid10 near: add stripes (minimum 4), change stripesize, no stripe removal possible, change to offset layout +raid10 offset: add stripes, change stripesize, no stripe removal possible, change to near layout +raid10 far: not possible + +Table line examples: + +### raid1 -> raid5 +# +# 2 devices limitation in raid1. +# raid5 personality is able to just map 2 like raid1. +# Reshape after takeover to change to full raid5 layout + + 0 1960886272 raid raid1 3 0 region_size 2048 2 /dev/dm-0 /dev/dm-1 /dev/dm-2 /dev/dm-3 + +# dm-0 and dm-2 are e.g. 4MiB large metadata devices, dm-1 and dm-3 have to be at least 1960886272 big. +# +# Table line to takeover to raid5 + + 0 1960886272 raid raid5 3 0 region_size 2048 2 /dev/dm-0 /dev/dm-1 /dev/dm-2 /dev/dm-3 + +# Add required out-of-place reshape space to the beginniong of the given 2 data devices, +# allocate another metadata/data device tuple with the same sizes for the parity space +# and zero the first 4K of the metadata device. +# +# Example table of the out-of-place reshape space addition for one data device, e.g. dm-1 + + 0 8192 linear 8:0 0 1960903888 # <- must be free space segment + 8192 1960886272 linear 8:0 0 2048 # previous data segment + +# Mapping table for e.g. raid5_rs reshape causing the size of the raid device to double-fold once the reshape finishes. +# Check the status output (e.g. "dmsetup status $RaidDev") for progess. + + 0 $((2 * 1960886272)) raid raid5 7 0 region_size 2048 data_offset 8192 delta_disk 1 2 /dev/dm-0 /dev/dm-1 /dev/dm-2 /dev/dm-3 + + Version History --------------- diff --git a/Documentation/admin-guide/device-mapper/verity.rst b/Documentation/admin-guide/device-mapper/verity.rst index 8c3f1f967a3cdf..3ecab1cff9c64c 100644 --- a/Documentation/admin-guide/device-mapper/verity.rst +++ b/Documentation/admin-guide/device-mapper/verity.rst @@ -236,8 +236,10 @@ is available at the cryptsetup project's wiki page Status ====== -V (for Valid) is returned if every check performed so far was valid. -If any check failed, C (for Corruption) is returned. +1. V (for Valid) is returned if every check performed so far was valid. + If any check failed, C (for Corruption) is returned. +2. Number of corrected blocks by Forward Error Correction. + '-' if Forward Error Correction is not enabled. Example ======= diff --git a/Documentation/admin-guide/dynamic-debug-howto.rst b/Documentation/admin-guide/dynamic-debug-howto.rst index 7c036590cd07c1..095a63892257e4 100644 --- a/Documentation/admin-guide/dynamic-debug-howto.rst +++ b/Documentation/admin-guide/dynamic-debug-howto.rst @@ -223,12 +223,13 @@ The flags are:: f Include the function name s Include the source file name l Include line number + d Include call trace For ``print_hex_dump_debug()`` and ``print_hex_dump_bytes()``, only the ``p`` flag has meaning, other flags are ignored. -Note the regexp ``^[-+=][fslmpt_]+$`` matches a flags specification. -To clear all flags at once, use ``=_`` or ``-fslmpt``. +Note the regexp ``^[-+=][fslmptd_]+$`` matches a flags specification. +To clear all flags at once, use ``=_`` or ``-fslmptd``. Debug messages during Boot Process diff --git a/Documentation/admin-guide/efi-stub.rst b/Documentation/admin-guide/efi-stub.rst index 090f3a185e1897..f8e7407698bd2a 100644 --- a/Documentation/admin-guide/efi-stub.rst +++ b/Documentation/admin-guide/efi-stub.rst @@ -79,6 +79,9 @@ because the image we're executing is interpreted by the EFI shell, which understands relative paths, whereas the rest of the command line is passed to bzImage.efi. +.. hint:: + It is also possible to provide an initrd using a Linux-specific UEFI + protocol at boot time. See :ref:`pe-coff-entry-point` for details. The "dtb=" option ----------------- diff --git a/Documentation/admin-guide/hw-vuln/l1d_flush.rst b/Documentation/admin-guide/hw-vuln/l1d_flush.rst index 210020bc3f5684..35dc25159b28a2 100644 --- a/Documentation/admin-guide/hw-vuln/l1d_flush.rst +++ b/Documentation/admin-guide/hw-vuln/l1d_flush.rst @@ -31,7 +31,7 @@ specifically opt into the feature to enable it. Mitigation ---------- -When PR_SET_L1D_FLUSH is enabled for a task a flush of the L1D cache is +When PR_SPEC_L1D_FLUSH is enabled for a task a flush of the L1D cache is performed when the task is scheduled out and the incoming task belongs to a different process and therefore to a different address space. diff --git a/Documentation/admin-guide/hw-vuln/spectre.rst b/Documentation/admin-guide/hw-vuln/spectre.rst index 991f12adef8d90..4bb8549bee8242 100644 --- a/Documentation/admin-guide/hw-vuln/spectre.rst +++ b/Documentation/admin-guide/hw-vuln/spectre.rst @@ -406,7 +406,7 @@ The possible values in this file are: - Single threaded indirect branch prediction (STIBP) status for protection between different hyper threads. This feature can be controlled through - prctl per process, or through kernel command line options. This is x86 + prctl per process, or through kernel command line options. This is an x86 only feature. For more details see below. ==================== ======================================================== diff --git a/Documentation/admin-guide/kernel-parameters.rst b/Documentation/admin-guide/kernel-parameters.rst index 7bf8cc7df6b54d..02a725536cc50c 100644 --- a/Documentation/admin-guide/kernel-parameters.rst +++ b/Documentation/admin-guide/kernel-parameters.rst @@ -110,102 +110,7 @@ The parameters listed below are only valid if certain kernel build options were enabled and if respective hardware is present. This list should be kept in alphabetical order. The text in square brackets at the beginning of each description states the restrictions within which a parameter -is applicable:: - - ACPI ACPI support is enabled. - AGP AGP (Accelerated Graphics Port) is enabled. - ALSA ALSA sound support is enabled. - APIC APIC support is enabled. - APM Advanced Power Management support is enabled. - APPARMOR AppArmor support is enabled. - ARM ARM architecture is enabled. - ARM64 ARM64 architecture is enabled. - AX25 Appropriate AX.25 support is enabled. - CLK Common clock infrastructure is enabled. - CMA Contiguous Memory Area support is enabled. - DRM Direct Rendering Management support is enabled. - DYNAMIC_DEBUG Build in debug messages and enable them at runtime - EARLY Parameter processed too early to be embedded in initrd. - EDD BIOS Enhanced Disk Drive Services (EDD) is enabled - EFI EFI Partitioning (GPT) is enabled - EVM Extended Verification Module - FB The frame buffer device is enabled. - FTRACE Function tracing enabled. - GCOV GCOV profiling is enabled. - HIBERNATION HIBERNATION is enabled. - HW Appropriate hardware is enabled. - HYPER_V HYPERV support is enabled. - IMA Integrity measurement architecture is enabled. - IP_PNP IP DHCP, BOOTP, or RARP is enabled. - IPV6 IPv6 support is enabled. - ISAPNP ISA PnP code is enabled. - ISDN Appropriate ISDN support is enabled. - ISOL CPU Isolation is enabled. - JOY Appropriate joystick support is enabled. - KGDB Kernel debugger support is enabled. - KVM Kernel Virtual Machine support is enabled. - LIBATA Libata driver is enabled - LOONGARCH LoongArch architecture is enabled. - LOOP Loopback device support is enabled. - LP Printer support is enabled. - M68k M68k architecture is enabled. - These options have more detailed description inside of - Documentation/arch/m68k/kernel-options.rst. - MDA MDA console support is enabled. - MIPS MIPS architecture is enabled. - MOUSE Appropriate mouse support is enabled. - MSI Message Signaled Interrupts (PCI). - MTD MTD (Memory Technology Device) support is enabled. - NET Appropriate network support is enabled. - NFS Appropriate NFS support is enabled. - NUMA NUMA support is enabled. - OF Devicetree is enabled. - PARISC The PA-RISC architecture is enabled. - PCI PCI bus support is enabled. - PCIE PCI Express support is enabled. - PCMCIA The PCMCIA subsystem is enabled. - PNP Plug & Play support is enabled. - PPC PowerPC architecture is enabled. - PPT Parallel port support is enabled. - PS2 Appropriate PS/2 support is enabled. - PV_OPS A paravirtualized kernel is enabled. - RAM RAM disk support is enabled. - RDT Intel Resource Director Technology. - RISCV RISCV architecture is enabled. - S390 S390 architecture is enabled. - SCSI Appropriate SCSI support is enabled. - A lot of drivers have their options described inside - the Documentation/scsi/ sub-directory. - SDW SoundWire support is enabled. - SECURITY Different security models are enabled. - SELINUX SELinux support is enabled. - SERIAL Serial support is enabled. - SH SuperH architecture is enabled. - SMP The kernel is an SMP kernel. - SPARC Sparc architecture is enabled. - SUSPEND System suspend states are enabled. - SWSUSP Software suspend (hibernation) is enabled. - TPM TPM drivers are enabled. - UMS USB Mass Storage support is enabled. - USB USB support is enabled. - USBHID USB Human Interface Device support is enabled. - V4L Video For Linux support is enabled. - VGA The VGA console has been enabled. - VMMIO Driver for memory mapped virtio devices is enabled. - VT Virtual terminal support is enabled. - WDT Watchdog support is enabled. - X86-32 X86-32, aka i386 architecture is enabled. - X86-64 X86-64 architecture is enabled. - X86 Either 32-bit or 64-bit x86 (same as X86-32+X86-64) - X86_UV SGI UV support is enabled. - XEN Xen support is enabled - XTENSA xtensa architecture is enabled. - -In addition, the following text indicates that the option:: - - BOOT Is a boot loader parameter. - BUGS= Relates to possible processor bugs on the said processor. - KNL Is a kernel start-up parameter. +is applicable. Parameters denoted with BOOT are actually interpreted by the boot loader, and have no meaning to the kernel directly. diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 6c42061ca20e58..a8d0afde7f85a5 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -1,3 +1,101 @@ + ACPI ACPI support is enabled. + AGP AGP (Accelerated Graphics Port) is enabled. + ALSA ALSA sound support is enabled. + APIC APIC support is enabled. + APM Advanced Power Management support is enabled. + APPARMOR AppArmor support is enabled. + ARM ARM architecture is enabled. + ARM64 ARM64 architecture is enabled. + AX25 Appropriate AX.25 support is enabled. + CLK Common clock infrastructure is enabled. + CMA Contiguous Memory Area support is enabled. + DRM Direct Rendering Management support is enabled. + DYNAMIC_DEBUG Build in debug messages and enable them at runtime + EARLY Parameter processed too early to be embedded in initrd. + EDD BIOS Enhanced Disk Drive Services (EDD) is enabled + EFI EFI Partitioning (GPT) is enabled + EVM Extended Verification Module + FB The frame buffer device is enabled. + FTRACE Function tracing enabled. + GCOV GCOV profiling is enabled. + HIBERNATION HIBERNATION is enabled. + HW Appropriate hardware is enabled. + HYPER_V HYPERV support is enabled. + IMA Integrity measurement architecture is enabled. + IP_PNP IP DHCP, BOOTP, or RARP is enabled. + IPV6 IPv6 support is enabled. + ISAPNP ISA PnP code is enabled. + ISDN Appropriate ISDN support is enabled. + ISOL CPU Isolation is enabled. + JOY Appropriate joystick support is enabled. + KGDB Kernel debugger support is enabled. + KVM Kernel Virtual Machine support is enabled. + LIBATA Libata driver is enabled + LOONGARCH LoongArch architecture is enabled. + LOOP Loopback device support is enabled. + LP Printer support is enabled. + M68k M68k architecture is enabled. + These options have more detailed description inside of + Documentation/arch/m68k/kernel-options.rst. + MDA MDA console support is enabled. + MIPS MIPS architecture is enabled. + MOUSE Appropriate mouse support is enabled. + MSI Message Signaled Interrupts (PCI). + MTD MTD (Memory Technology Device) support is enabled. + NET Appropriate network support is enabled. + NFS Appropriate NFS support is enabled. + NUMA NUMA support is enabled. + OF Devicetree is enabled. + PARISC The PA-RISC architecture is enabled. + PCI PCI bus support is enabled. + PCIE PCI Express support is enabled. + PCMCIA The PCMCIA subsystem is enabled. + PNP Plug & Play support is enabled. + PPC PowerPC architecture is enabled. + PPT Parallel port support is enabled. + PS2 Appropriate PS/2 support is enabled. + PV_OPS A paravirtualized kernel is enabled. + RAM RAM disk support is enabled. + RDT Intel Resource Director Technology. + RISCV RISCV architecture is enabled. + S390 S390 architecture is enabled. + SCSI Appropriate SCSI support is enabled. + A lot of drivers have their options described inside + the Documentation/scsi/ sub-directory. + SDW SoundWire support is enabled. + SECURITY Different security models are enabled. + SELINUX SELinux support is enabled. + SERIAL Serial support is enabled. + SH SuperH architecture is enabled. + SMP The kernel is an SMP kernel. + SPARC Sparc architecture is enabled. + SUSPEND System suspend states are enabled. + SWSUSP Software suspend (hibernation) is enabled. + TPM TPM drivers are enabled. + UMS USB Mass Storage support is enabled. + USB USB support is enabled. + USBHID USB Human Interface Device support is enabled. + V4L Video For Linux support is enabled. + VGA The VGA console has been enabled. + VMMIO Driver for memory mapped virtio devices is enabled. + VT Virtual terminal support is enabled. + WDT Watchdog support is enabled. + X86-32 X86-32, aka i386 architecture is enabled. + X86-64 X86-64 architecture is enabled. + X86 Either 32-bit or 64-bit x86 (same as X86-32+X86-64) + X86_UV SGI UV support is enabled. + XEN Xen support is enabled + XTENSA xtensa architecture is enabled. + +In addition, the following text indicates that the option + + BOOT Is a boot loader parameter. + BUGS= Relates to possible processor bugs on the said processor. + KNL Is a kernel start-up parameter. + + +Kernel parameters + accept_memory= [MM] Format: { eager | lazy } default: lazy @@ -669,6 +767,14 @@ nokmem -- Disable kernel memory accounting. nobpf -- Disable BPF memory accounting. + check_pages= [MM,EARLY] Enable sanity checking of pages after + allocations / before freeing. This adds checks to catch + double-frees, use-after-frees, and other sources of + page corruption by inspecting page internals (flags, + mapcount/refcount, memcg_data, etc.). + Format: { "0" | "1" } + Default: 0 (1 if CONFIG_DEBUG_VM is set) + checkreqprot= [SELINUX] Set initial checkreqprot flag value. Format: { "0" | "1" } See security/selinux/Kconfig help text. @@ -1013,7 +1119,7 @@ It will be ignored when crashkernel=X,high is not used or memory reserved is below 4G. crashkernel=size[KMG],cma - [KNL, X86] Reserve additional crash kernel memory from + [KNL, X86, ppc] Reserve additional crash kernel memory from CMA. This reservation is usable by the first system's userspace memory and kernel movable allocations (memory balloon, zswap). Pages allocated from this memory range @@ -1113,12 +1219,8 @@ debugfs= [KNL,EARLY] This parameter enables what is exposed to userspace and debugfs internal clients. - Format: { on, no-mount, off } + Format: { on, off } on: All functions are enabled. - no-mount: - Filesystem is not registered but kernel clients can - access APIs and a crashkernel can be used to read - its content. There is nothing to mount. off: Filesystem is not registered and clients get a -EPERM as result when trying to register files or directories within debugfs. @@ -1907,6 +2009,16 @@ /sys/power/pm_test). Only available when CONFIG_PM_DEBUG is set. Default value is 5. + hibernate_compression_threads= + [HIBERNATION] + Set the number of threads used for compressing or decompressing + hibernation images. + + Format: + Default: 3 + Minimum: 1 + Example: hibernate_compression_threads=4 + highmem=nn[KMG] [KNL,BOOT,EARLY] forces the highmem zone to have an exact size of . This works even on boxes that have no highmem otherwise. This also works to reduce highmem @@ -2010,14 +2122,20 @@ the added memory block itself do not be affected. hung_task_panic= - [KNL] Should the hung task detector generate panics. - Format: 0 | 1 + [KNL] Number of hung tasks to trigger kernel panic. + Format: + + When set to a non-zero value, a kernel panic will be triggered if + the number of detected hung tasks reaches this value. + + 0: don't panic + 1: panic immediately on first hung task + N: panic after N hung tasks are detected in a single scan - A value of 1 instructs the kernel to panic when a - hung task is detected. The default value is controlled - by the CONFIG_BOOTPARAM_HUNG_TASK_PANIC build-time - option. The value selected by this boot parameter can - be changed later by the kernel.hung_task_panic sysctl. + The default value is controlled by the + CONFIG_BOOTPARAM_HUNG_TASK_PANIC build-time option. The value + selected by this boot parameter can be changed later by the + kernel.hung_task_panic sysctl. hvc_iucv= [S390] Number of z/VM IUCV hypervisor console (HVC) terminal devices. Valid values: 0..8 @@ -6207,7 +6325,7 @@ rdt= [HW,X86,RDT] Turn on/off individual RDT features. List is: cmt, mbmtotal, mbmlocal, l3cat, l3cdp, l2cat, l2cdp, - mba, smba, bmec, abmc. + mba, smba, bmec, abmc, sdciae. E.g. to turn on cmt and turn off mba use: rdt=cmt,!mba @@ -6404,7 +6522,7 @@ that don't. off - no mitigation - auto - automatically select a migitation + auto - automatically select a mitigation auto,nosmt - automatically select a mitigation, disabling SMT if necessary for the full mitigation (only on Zen1 @@ -6500,6 +6618,10 @@ Memory area to be used by remote processor image, managed by CMA. + rseq_debug= [KNL] Enable or disable restartable sequence + debug mode. Defaults to CONFIG_RSEQ_DEBUG_DEFAULT_ENABLE. + Format: + rt_group_sched= [KNL] Enable or disable SCHED_RR/FIFO group scheduling when CONFIG_RT_GROUP_SCHED=y. Defaults to !CONFIG_RT_GROUP_SCHED_DEFAULT_DISABLED. @@ -7150,7 +7272,7 @@ limit. Default value is 8191 pools. stacktrace [FTRACE] - Enabled the stack tracer on boot up. + Enable the stack tracer on boot up. stacktrace_filter=[function-list] [FTRACE] Limit the functions that the stack tracer @@ -7192,6 +7314,9 @@ them frequently to increase the rate of SLB faults on kernel addresses. + no_slb_preload [PPC,EARLY] + Disables slb preloading for userspace. + sunrpc.min_resvport= sunrpc.max_resvport= [NFS,SUNRPC] diff --git a/Documentation/admin-guide/laptops/index.rst b/Documentation/admin-guide/laptops/index.rst index db842b629303c1..6432c251dc9513 100644 --- a/Documentation/admin-guide/laptops/index.rst +++ b/Documentation/admin-guide/laptops/index.rst @@ -17,3 +17,4 @@ Laptop Drivers sonypi thinkpad-acpi toshiba_haps + uniwill-laptop diff --git a/Documentation/admin-guide/laptops/uniwill-laptop.rst b/Documentation/admin-guide/laptops/uniwill-laptop.rst new file mode 100644 index 00000000000000..a16baf15516b16 --- /dev/null +++ b/Documentation/admin-guide/laptops/uniwill-laptop.rst @@ -0,0 +1,60 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Uniwill laptop extra features +============================= + +On laptops manufactured by Uniwill (either directly or as ODM), the ``uniwill-laptop`` driver +handles various platform-specific features. + +Module Loading +-------------- + +The ``uniwill-laptop`` driver relies on a DMI table to automatically load on supported devices. +When using the ``force`` module parameter, this DMI check will be omitted, allowing the driver +to be loaded on unsupported devices for testing purposes. + +Hotkeys +------- + +Usually the FN keys work without a special driver. However as soon as the ``uniwill-laptop`` driver +is loaded, the FN keys need to be handled manually. This is done automatically by the driver itself. + +Keyboard settings +----------------- + +The ``uniwill-laptop`` driver allows the user to enable/disable: + + - the FN and super key lock functionality of the integrated keyboard + - the touchpad toggle functionality of the integrated touchpad + +See Documentation/ABI/testing/sysfs-driver-uniwill-laptop for details. + +Hwmon interface +--------------- + +The ``uniwill-laptop`` driver supports reading of the CPU and GPU temperature and supports up to +two fans. Userspace applications can access sensor readings over the hwmon sysfs interface. + +Platform profile +---------------- + +Support for changing the platform performance mode is currently not implemented. + +Battery Charging Control +------------------------ + +The ``uniwill-laptop`` driver supports controlling the battery charge limit. This happens over +the standard ``charge_control_end_threshold`` power supply sysfs attribute. All values +between 1 and 100 percent are supported. + +Additionally the driver signals the presence of battery charging issues through the standard +``health`` power supply sysfs attribute. + +Lightbar +-------- + +The ``uniwill-laptop`` driver exposes the lightbar found on some models as a standard multicolor +LED class device. The default name of this LED class device is ``uniwill:multicolor:status``. + +See Documentation/ABI/testing/sysfs-driver-uniwill-laptop for details on how to control the various +animation modes of the lightbar. diff --git a/Documentation/admin-guide/md.rst b/Documentation/admin-guide/md.rst index deed823eab016c..dc7eab191caaa6 100644 --- a/Documentation/admin-guide/md.rst +++ b/Documentation/admin-guide/md.rst @@ -238,6 +238,16 @@ All md devices contain: the number of devices in a raid4/5/6, or to support external metadata formats which mandate such clipping. + logical_block_size + Configure the array's logical block size in bytes. This attribute + is only supported for 1.x meta. Write the value before starting + array. The final array LBS uses the maximum between this + configuration and LBS of all combined devices. Note that + LBS cannot exceed PAGE_SIZE before RAID supports folio. + WARNING: Arrays created on new kernel cannot be assembled at old + kernel due to padding check, Set module parameter 'check_new_feature' + to false to bypass, but data loss may occur. + reshape_position This is either ``none`` or a sector number within the devices of the array where ``reshape`` is up to. If this is set, the three diff --git a/Documentation/admin-guide/media/mali-c55-graph.dot b/Documentation/admin-guide/media/mali-c55-graph.dot new file mode 100644 index 00000000000000..0775ba42bf4cfa --- /dev/null +++ b/Documentation/admin-guide/media/mali-c55-graph.dot @@ -0,0 +1,19 @@ +digraph board { + rankdir=TB + n00000001 [label="{{} | mali-c55 tpg\n/dev/v4l-subdev0 | { 0}}", shape=Mrecord, style=filled, fillcolor=green] + n00000001:port0 -> n00000003:port0 [style=dashed] + n00000003 [label="{{ 0} | mali-c55 isp\n/dev/v4l-subdev1 | { 1 | 2}}", shape=Mrecord, style=filled, fillcolor=green] + n00000003:port1 -> n00000007:port0 [style=bold] + n00000003:port2 -> n00000007:port2 [style=bold] + n00000003:port1 -> n0000000b:port0 [style=bold] + n00000007 [label="{{ 0 | 2} | mali-c55 resizer fr\n/dev/v4l-subdev2 | { 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000007:port1 -> n0000000e [style=bold] + n0000000b [label="{{ 0} | mali-c55 resizer ds\n/dev/v4l-subdev3 | { 1}}", shape=Mrecord, style=filled, fillcolor=green] + n0000000b:port1 -> n00000012 [style=bold] + n0000000e [label="mali-c55 fr\n/dev/video0", shape=box, style=filled, fillcolor=yellow] + n00000012 [label="mali-c55 ds\n/dev/video1", shape=box, style=filled, fillcolor=yellow] + n00000022 [label="{{ 0} | csi2-rx\n/dev/v4l-subdev4 | { 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000022:port1 -> n00000003:port0 + n00000027 [label="{{} | imx415 1-001a\n/dev/v4l-subdev5 | { 0}}", shape=Mrecord, style=filled, fillcolor=green] + n00000027:port0 -> n00000022:port0 [style=bold] +} \ No newline at end of file diff --git a/Documentation/admin-guide/media/mali-c55.rst b/Documentation/admin-guide/media/mali-c55.rst new file mode 100644 index 00000000000000..315f982000c48e --- /dev/null +++ b/Documentation/admin-guide/media/mali-c55.rst @@ -0,0 +1,413 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================================== +ARM Mali-C55 Image Signal Processor driver +========================================== + +Introduction +============ + +This file documents the driver for ARM's Mali-C55 Image Signal Processor. The +driver is located under drivers/media/platform/arm/mali-c55. + +The Mali-C55 ISP receives data in either raw Bayer format or RGB/YUV format from +sensors through either a parallel interface or a memory bus before processing it +and outputting it through an internal DMA engine. Two output pipelines are +possible (though one may not be fitted, depending on the implementation). These +are referred to as "Full resolution" and "Downscale", but the naming is historic +and both pipes are capable of cropping/scaling operations. The full resolution +pipe is also capable of outputting RAW data, bypassing much of the ISP's +processing. The downscale pipe cannot output RAW data. An integrated test +pattern generator can be used to drive the ISP and produce image data in the +absence of a connected camera sensor. The driver module is named mali_c55, and +is enabled through the CONFIG_VIDEO_MALI_C55 config option. + +The driver implements V4L2, Media Controller and V4L2 Subdevice interfaces and +expects camera sensors connected to the ISP to have V4L2 subdevice interfaces. + +Mali-C55 ISP hardware +===================== + +A high level functional view of the Mali-C55 ISP is presented below. The ISP +takes input from either a live source or through a DMA engine for memory input, +depending on the SoC integration.:: + + +---------+ +----------+ +--------+ + | Sensor |--->| CSI-2 Rx | "Full Resolution" | DMA | + +---------+ +----------+ |\ Output +--->| Writer | + | | \ | +--------+ + | | \ +----------+ +------+---> Streaming I/O + +------------+ +------->| | | | | + | | | |-->| Mali-C55 |--+ + | DMA Reader |--------------->| | | ISP | | + | | | / | | | +---> Streaming I/O + +------------+ | / +----------+ | | + |/ +------+ + | +--------+ + +--->| DMA | + "Downscaled" | Writer | + Output +--------+ + +Media Controller Topology +========================= + +An example of the ISP's topology (as implemented in a system with an IMX415 +camera sensor and generic CSI-2 receiver) is below: + + +.. kernel-figure:: mali-c55-graph.dot + :alt: mali-c55-graph.dot + :align: center + +The driver has 4 V4L2 subdevices: + +- `mali_c55 isp`: Responsible for configuring input crop and color space + conversion +- `mali_c55 tpg`: The test pattern generator, emulating a camera sensor. +- `mali_c55 resizer fr`: The Full-Resolution pipe resizer +- `mali_c55 resizer ds`: The Downscale pipe resizer + +The driver has 3 V4L2 video devices: + +- `mali-c55 fr`: The full-resolution pipe's capture device +- `mali-c55 ds`: The downscale pipe's capture device +- `mali-c55 3a stats`: The 3A statistics capture device + +Frame sequences are synchronised across to two capture devices, meaning if one +pipe is started later than the other the sequence numbers returned in its +buffers will match those of the other pipe rather than starting from zero. + +Idiosyncrasies +-------------- + +**mali-c55 isp** +The `mali-c55 isp` subdevice has a single sink pad to which all sources of data +should be connected. The active source is selected by enabling the appropriate +media link and disabling all others. The ISP has two source pads, reflecting the +different paths through which it can internally route data. Tap points within +the ISP allow users to divert data to avoid processing by some or all of the +hardware's processing steps. The diagram below is intended only to highlight how +the bypassing works and is not a true reflection of those processing steps; for +a high-level functional block diagram see ARM's developer page for the +ISP [3]_:: + + +--------------------------------------------------------------+ + | Possible Internal ISP Data Routes | + | +------------+ +----------+ +------------+ | + +---+ | | | | | Colour | +---+ + | 0 |--+-->| Processing |->| Demosaic |->| Space |--->| 1 | + +---+ | | | | | | Conversion | +---+ + | | +------------+ +----------+ +------------+ | + | | +---+ + | +---------------------------------------------------| 2 | + | +---+ + | | + +--------------------------------------------------------------+ + + +.. flat-table:: + :header-rows: 1 + + * - Pad + - Direction + - Purpose + + * - 0 + - sink + - Data input, connected to the TPG and camera sensors + + * - 1 + - source + - RGB/YUV data, connected to the FR and DS V4L2 subdevices + + * - 2 + - source + - RAW bayer data, connected to the FR V4L2 subdevices + +The ISP is limited to both input and output resolutions between 640x480 and +8192x8192, and this is reflected in the ISP and resizer subdevice's .set_fmt() +operations. + +**mali-c55 resizer fr** +The `mali-c55 resizer fr` subdevice has two _sink_ pads to reflect the different +insertion points in the hardware (either RAW or demosaiced data): + +.. flat-table:: + :header-rows: 1 + + * - Pad + - Direction + - Purpose + + * - 0 + - sink + - Data input connected to the ISP's demosaiced stream. + + * - 1 + - source + - Data output connected to the capture video device + + * - 2 + - sink + - Data input connected to the ISP's raw data stream + +The data source in use is selected through the routing API; two routes each of a +single stream are available: + +.. flat-table:: + :header-rows: 1 + + * - Sink Pad + - Source Pad + - Purpose + + * - 0 + - 1 + - Demosaiced data route + + * - 2 + - 1 + - Raw data route + + +If the demosaiced route is active then the FR pipe is only capable of output +in RGB/YUV formats. If the raw route is active then the output reflects the +input (which may be either Bayer or RGB/YUV data). + +Using the driver to capture video +================================= + +Using the media controller APIs we can configure the input source and ISP to +capture images in a variety of formats. In the examples below, configuring the +media graph is done with the v4l-utils [1]_ package's media-ctl utility. +Capturing the images is done with yavta [2]_. + +Configuring the input source +---------------------------- + +The first step is to set the input source that we wish by enabling the correct +media link. Using the example topology above, we can select the TPG as follows: + +.. code-block:: none + + media-ctl -l "'lte-csi2-rx':1->'mali-c55 isp':0[0]" + media-ctl -l "'mali-c55 tpg':0->'mali-c55 isp':0[1]" + +Configuring which video devices will stream data +------------------------------------------------ + +The driver will wait for all video devices to have their VIDIOC_STREAMON ioctl +called before it tells the sensor to start streaming. To facilitate this we need +to enable links to the video devices that we want to use. In the example below +we enable the links to both of the image capture video devices + +.. code-block:: none + + media-ctl -l "'mali-c55 resizer fr':1->'mali-c55 fr':0[1]" + media-ctl -l "'mali-c55 resizer ds':1->'mali-c55 ds':0[1]" + +Capturing bayer data from the source and processing to RGB/YUV +-------------------------------------------------------------- + +To capture 1920x1080 bayer data from the source and push it through the ISP's +full processing pipeline, we configure the data formats appropriately on the +source, ISP and resizer subdevices and set the FR resizer's routing to select +processed data. The media bus format on the resizer's source pad will be either +RGB121212_1X36 or YUV10_1X30, depending on whether you want to capture RGB or +YUV. The ISP's debayering block outputs RGB data natively, setting the source +pad format to YUV10_1X30 enables the colour space conversion block. + +In this example we target RGB565 output, so select RGB121212_1X36 as the resizer +source pad's format: + +.. code-block:: none + + # Set formats on the TPG and ISP + media-ctl -V "'mali-c55 tpg':0[fmt:SRGGB20_1X20/1920x1080]" + media-ctl -V "'mali-c55 isp':0[fmt:SRGGB20_1X20/1920x1080]" + media-ctl -V "'mali-c55 isp':1[fmt:SRGGB20_1X20/1920x1080]" + + # Set routing on the FR resizer + media-ctl -R "'mali-c55 resizer fr'[0/0->1/0[1],2/0->1/0[0]]" + + # Set format on the resizer, must be done AFTER the routing. + media-ctl -V "'mali-c55 resizer fr':1[fmt:RGB121212_1X36/1920x1080]" + +The downscale output can also be used to stream data at the same time. In this +case since only processed data can be captured through the downscale output no +routing need be set: + +.. code-block:: none + + # Set format on the resizer + media-ctl -V "'mali-c55 resizer ds':1[fmt:RGB121212_1X36/1920x1080]" + +Following which images can be captured from both the FR and DS output's video +devices (simultaneously, if desired): + +.. code-block:: none + + yavta -f RGB565 -s 1920x1080 -c10 /dev/video0 + yavta -f RGB565 -s 1920x1080 -c10 /dev/video1 + +Cropping the image +~~~~~~~~~~~~~~~~~~ + +Both the full resolution and downscale pipes can crop to a minimum resolution of +640x480. To crop the image simply configure the resizer's sink pad's crop and +compose rectangles and set the format on the video device: + +.. code-block:: none + + media-ctl -V "'mali-c55 resizer fr':0[fmt:RGB121212_1X36/1920x1080 crop:(480,270)/640x480 compose:(0,0)/640x480]" + media-ctl -V "'mali-c55 resizer fr':1[fmt:RGB121212_1X36/640x480]" + yavta -f RGB565 -s 640x480 -c10 /dev/video0 + +Downscaling the image +~~~~~~~~~~~~~~~~~~~~~ + +Both the full resolution and downscale pipes can downscale the image by up to 8x +provided the minimum 640x480 output resolution is adhered to. For the best image +result the scaling ratio for each direction should be the same. To configure +scaling we use the compose rectangle on the resizer's sink pad: + +.. code-block:: none + + media-ctl -V "'mali-c55 resizer fr':0[fmt:RGB121212_1X36/1920x1080 crop:(0,0)/1920x1080 compose:(0,0)/640x480]" + media-ctl -V "'mali-c55 resizer fr':1[fmt:RGB121212_1X36/640x480]" + yavta -f RGB565 -s 640x480 -c10 /dev/video0 + +Capturing images in YUV formats +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +If we need to output YUV data rather than RGB the color space conversion block +needs to be active, which is achieved by setting MEDIA_BUS_FMT_YUV10_1X30 on the +resizer's source pad. We can then configure a capture format like NV12 (here in +its multi-planar variant) + +.. code-block:: none + + media-ctl -V "'mali-c55 resizer fr':1[fmt:YUV10_1X30/1920x1080]" + yavta -f NV12M -s 1920x1080 -c10 /dev/video0 + +Capturing RGB data from the source and processing it with the resizers +---------------------------------------------------------------------- + +The Mali-C55 ISP can work with sensors capable of outputting RGB data. In this +case although none of the image quality blocks would be used it can still +crop/scale the data in the usual way. For this reason RGB data input to the ISP +still goes through the ISP subdevice's pad 1 to the resizer. + +To achieve this, the ISP's sink pad's format is set to +MEDIA_BUS_FMT_RGB202020_1X60 - this reflects the format that data must be in to +work with the ISP. Converting the camera sensor's output to that format is the +responsibility of external hardware. + +In this example we ask the test pattern generator to give us RGB data instead of +bayer. + +.. code-block:: none + + media-ctl -V "'mali-c55 tpg':0[fmt:RGB202020_1X60/1920x1080]" + media-ctl -V "'mali-c55 isp':0[fmt:RGB202020_1X60/1920x1080]" + +Cropping or scaling the data can be done in exactly the same way as outlined +earlier. + +Capturing raw data from the source and outputting it unmodified +----------------------------------------------------------------- + +The ISP can additionally capture raw data from the source and output it on the +full resolution pipe only, completely unmodified. In this case the downscale +pipe can still process the data normally and be used at the same time. + +To configure raw bypass the FR resizer's subdevice's routing table needs to be +configured, followed by formats in the appropriate places: + +.. code-block:: none + + media-ctl -R "'mali-c55 resizer fr'[0/0->1/0[0],2/0->1/0[1]]" + media-ctl -V "'mali-c55 isp':0[fmt:RGB202020_1X60/1920x1080]" + media-ctl -V "'mali-c55 resizer fr':2[fmt:RGB202020_1X60/1920x1080]" + media-ctl -V "'mali-c55 resizer fr':1[fmt:RGB202020_1X60/1920x1080]" + + # Set format on the video device and stream + yavta -f RGB565 -s 1920x1080 -c10 /dev/video0 + +.. _mali-c55-3a-stats: + +Capturing ISP Statistics +======================== + +The ISP is capable of producing statistics for consumption by image processing +algorithms running in userspace. These statistics can be captured by queueing +buffers to the `mali-c55 3a stats` V4L2 Device whilst the ISP is streaming. Only +the :ref:`V4L2_META_FMT_MALI_C55_STATS ` +format is supported, so no format-setting need be done: + +.. code-block:: none + + # We assume the media graph has been configured to support RGB565 capture + # from the mali-c55 fr V4L2 Device, which is at /dev/video0. The statistics + # V4L2 device is at /dev/video3 + + yavta -f RGB565 -s 1920x1080 -c32 /dev/video0 && \ + yavta -c10 -F /dev/video3 + +The layout of the buffer is described by :c:type:`mali_c55_stats_buffer`, +but broadly statistics are generated to support three image processing +algorithms; AEXP (Auto-Exposure), AWB (Auto-White Balance) and AF (Auto-Focus). +These stats can be drawn from various places in the Mali C55 ISP pipeline, known +as "tap points". This high-level block diagram is intended to explain where in +the processing flow the statistics can be drawn from:: + + +--> AEXP-2 +----> AEXP-1 +--> AF-0 + | +----> AF-1 | + | | | + +---------+ | +--------------+ | +--------------+ | + | Input +-+-->+ Digital Gain +---+-->+ Black Level +---+---+ + +---------+ +--------------+ +--------------+ | + +-----------------------------------------------------------------+ + | + | +--------------+ +---------+ +----------------+ + +-->| Sinter Noise +-+ White +--+--->| Lens Shading +--+---------------+ + | Reduction | | Balance | | | | | | + +--------------+ +---------+ | +----------------+ | | + +---> AEXP-0 (A) +--> AEXP-0 (B) | + +--------------------------------------------------------------------------+ + | + | +----------------+ +--------------+ +----------------+ + +-->| Tone mapping +-+--->| Demosaicing +->+ Purple Fringe +-+-----------+ + | | | +--------------+ | Correction | | | + +----------------+ +-> AEXP-IRIDIX +----------------+ +---> AWB-0 | + +----------------------------------------------------------------------------+ + | +-------------+ +-------------+ + +------------------->| Colour +---+--->| Output | + | Correction | | | Pipelines | + +-------------+ | +-------------+ + +--> AWB-1 + +By default all statistics are drawn from the 0th tap point for each algorithm; +I.E. AEXP statistics from AEXP-0 (A), AWB statistics from AWB-0 and AF +statistics from AF-0. This is configurable for AEXP and AWB statsistics through +programming the ISP's parameters. + +.. _mali-c55-3a-params: + +Programming ISP Parameters +========================== + +The ISP can be programmed with various parameters from userspace to apply to the +hardware before and during video stream. This allows userspace to dynamically +change values such as black level, white balance and lens shading gains and so +on. + +The buffer format and how to populate it are described by the +:ref:`V4L2_META_FMT_MALI_C55_PARAMS ` format, +which should be set as the data format for the `mali-c55 3a params` video node. + +References +========== +.. [1] https://git.linuxtv.org/v4l-utils.git/ +.. [2] https://git.ideasonboard.org/yavta.git +.. [3] https://developer.arm.com/Processors/Mali-C55 diff --git a/Documentation/admin-guide/media/platform-cardlist.rst b/Documentation/admin-guide/media/platform-cardlist.rst index 1230ae4037ad55..63f4b19c3628f3 100644 --- a/Documentation/admin-guide/media/platform-cardlist.rst +++ b/Documentation/admin-guide/media/platform-cardlist.rst @@ -18,8 +18,6 @@ am437x-vpfe TI AM437x VPFE aspeed-video Aspeed AST2400 and AST2500 atmel-isc ATMEL Image Sensor Controller (ISC) atmel-isi ATMEL Image Sensor Interface (ISI) -c8sectpfe SDR platform devices -c8sectpfe SDR platform devices cafe_ccic Marvell 88ALP01 (Cafe) CMOS Camera Controller cdns-csi2rx Cadence MIPI-CSI2 RX Controller cdns-csi2tx Cadence MIPI-CSI2 TX Controller diff --git a/Documentation/admin-guide/media/radio-cardlist.rst b/Documentation/admin-guide/media/radio-cardlist.rst index a82a146bf91261..cec724256812ee 100644 --- a/Documentation/admin-guide/media/radio-cardlist.rst +++ b/Documentation/admin-guide/media/radio-cardlist.rst @@ -30,7 +30,6 @@ radio-terratec TerraTec ActiveRadio ISA Standalone radio-timb Enable the Timberdale radio driver radio-trust Trust FM radio card radio-typhoon Typhoon Radio (a.k.a. EcoRadio) -radio-wl1273 Texas Instruments WL1273 I2C FM Radio fm_drv ISA radio devices fm_drv ISA radio devices radio-zoltrix Zoltrix Radio diff --git a/Documentation/admin-guide/media/rkcif-rk3568-vicap.dot b/Documentation/admin-guide/media/rkcif-rk3568-vicap.dot new file mode 100644 index 00000000000000..3fac59335459f4 --- /dev/null +++ b/Documentation/admin-guide/media/rkcif-rk3568-vicap.dot @@ -0,0 +1,8 @@ +digraph board { + rankdir=TB + n00000001 [label="{{ 0} | rkcif-dvp0\n/dev/v4l-subdev0 | { 1}}", shape=Mrecord, style=filled, fillcolor=green] + n00000001:port1 -> n00000004 + n00000004 [label="rkcif-dvp0-id0\n/dev/video0", shape=box, style=filled, fillcolor=yellow] + n00000025 [label="{{} | it6801 2-0048\n/dev/v4l-subdev1 | { 0}}", shape=Mrecord, style=filled, fillcolor=green] + n00000025:port0 -> n00000001:port0 +} diff --git a/Documentation/admin-guide/media/rkcif.rst b/Documentation/admin-guide/media/rkcif.rst new file mode 100644 index 00000000000000..2558c121abc466 --- /dev/null +++ b/Documentation/admin-guide/media/rkcif.rst @@ -0,0 +1,79 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================================= +Rockchip Camera Interface (CIF) +========================================= + +Introduction +============ + +The Rockchip Camera Interface (CIF) is featured in many Rockchip SoCs in +different variants. +The different variants are combinations of common building blocks, such as + +* INTERFACE blocks of different types, namely + + * the Digital Video Port (DVP, a parallel data interface) + * the interface block for the MIPI CSI-2 receiver + +* CROP units + +* MIPI CSI-2 receiver (not available on all variants): This unit is referred + to as MIPI CSI HOST in the Rockchip documentation. + Technically, it is a separate hardware block, but it is strongly coupled to + the CIF and therefore included here. + +* MUX units (not available on all variants) that pass the video data to an + image signal processor (ISP) + +* SCALE units (not available on all variants) + +* DMA engines that transfer video data into system memory using a + double-buffering mechanism called ping-pong mode + +* Support for four streams per INTERFACE block (not available on all + variants), e.g., for MIPI CSI-2 Virtual Channels (VCs) + +This document describes the different variants of the CIF, their hardware +layout, as well as their representation in the media controller centric rkcif +device driver, which is located under drivers/media/platform/rockchip/rkcif. + +Variants +======== + +Rockchip PX30 Video Input Processor (VIP) +----------------------------------------- + +The PX30 Video Input Processor (VIP) features a digital video port that accepts +parallel video data or BT.656. +Since these protocols do not feature multiple streams, the VIP has one DMA +engine that transfers the input video data into system memory. + +The rkcif driver represents this hardware variant by exposing one V4L2 subdevice +(the DVP INTERFACE/CROP block) and one V4L2 device (the DVP DMA engine). + +Rockchip RK3568 Video Capture (VICAP) +------------------------------------- + +The RK3568 Video Capture (VICAP) unit features a digital video port and a MIPI +CSI-2 receiver that can receive video data independently. +The DVP accepts parallel video data, BT.656 and BT.1120. +Since the BT.1120 protocol may feature more than one stream, the RK3568 VICAP +DVP features four DMA engines that can capture different streams. +Similarly, the RK3568 VICAP MIPI CSI-2 receiver features four DMA engines to +handle different Virtual Channels (VCs). + +The rkcif driver represents this hardware variant by exposing up the following +V4L2 subdevices: + +* rkcif-dvp0: INTERFACE/CROP block for the DVP + +and the following video devices: + +* rkcif-dvp0-id0: The support for multiple streams on the DVP is not yet + implemented, as it is hard to find test hardware. Thus, this video device + represents the first DMA engine of the RK3568 DVP. + +.. kernel-figure:: rkcif-rk3568-vicap.dot + :alt: Topology of the RK3568 Video Capture (VICAP) unit + :align: center diff --git a/Documentation/admin-guide/media/v4l-drivers.rst b/Documentation/admin-guide/media/v4l-drivers.rst index 3bac5165b13416..393f83e8dc4dd8 100644 --- a/Documentation/admin-guide/media/v4l-drivers.rst +++ b/Documentation/admin-guide/media/v4l-drivers.rst @@ -19,12 +19,14 @@ Video4Linux (V4L) driver-specific documentation ipu3 ipu6-isys ivtv + mali-c55 mgb4 omap3isp philips qcom_camss raspberrypi-pisp-be rcar-fdp1 + rkcif rkisp1 raspberrypi-rp1-cfe saa7134 diff --git a/Documentation/admin-guide/mm/damon/lru_sort.rst b/Documentation/admin-guide/mm/damon/lru_sort.rst index 7b0775d281b489..72a94320267683 100644 --- a/Documentation/admin-guide/mm/damon/lru_sort.rst +++ b/Documentation/admin-guide/mm/damon/lru_sort.rst @@ -211,6 +211,28 @@ End of target memory region in physical address. The end physical address of memory region that DAMON_LRU_SORT will do work against. By default, biggest System RAM is used as the region. +addr_unit +--------- + +A scale factor for memory addresses and bytes. + +This parameter is for setting and getting the :ref:`address unit +` parameter of the DAMON instance for DAMON_RECLAIM. + +``monitor_region_start`` and ``monitor_region_end`` should be provided in this +unit. For example, let's suppose ``addr_unit``, ``monitor_region_start`` and +``monitor_region_end`` are set as ``1024``, ``0`` and ``10``, respectively. +Then DAMON_LRU_SORT will work for 10 KiB length of physical address range that +starts from address zero (``[0 * 1024, 10 * 1024)`` in bytes). + +Stat parameters having ``bytes_`` prefix are also in this unit. For example, +let's suppose values of ``addr_unit``, ``bytes_lru_sort_tried_hot_regions`` and +``bytes_lru_sorted_hot_regions`` are ``1024``, ``42``, and ``32``, +respectively. Then it means DAMON_LRU_SORT tried to LRU-sort 42 KiB of hot +memory and successfully LRU-sorted 32 KiB of the memory in total. + +If unsure, use only the default value (``1``) and forget about this. + kdamond_pid ----------- diff --git a/Documentation/admin-guide/mm/damon/reclaim.rst b/Documentation/admin-guide/mm/damon/reclaim.rst index af05ae6170184f..8eba3da8dcee0a 100644 --- a/Documentation/admin-guide/mm/damon/reclaim.rst +++ b/Documentation/admin-guide/mm/damon/reclaim.rst @@ -232,6 +232,28 @@ The end physical address of memory region that DAMON_RECLAIM will do work against. That is, DAMON_RECLAIM will find cold memory regions in this region and reclaims. By default, biggest System RAM is used as the region. +addr_unit +--------- + +A scale factor for memory addresses and bytes. + +This parameter is for setting and getting the :ref:`address unit +` parameter of the DAMON instance for DAMON_RECLAIM. + +``monitor_region_start`` and ``monitor_region_end`` should be provided in this +unit. For example, let's suppose ``addr_unit``, ``monitor_region_start`` and +``monitor_region_end`` are set as ``1024``, ``0`` and ``10``, respectively. +Then DAMON_RECLAIM will work for 10 KiB length of physical address range that +starts from address zero (``[0 * 1024, 10 * 1024)`` in bytes). + +``bytes_reclaim_tried_regions`` and ``bytes_reclaimed_regions`` are also in +this unit. For example, let's suppose values of ``addr_unit``, +``bytes_reclaim_tried_regions`` and ``bytes_reclaimed_regions`` are ``1024``, +``42``, and ``32``, respectively. Then it means DAMON_RECLAIM tried to reclaim +42 KiB memory and successfully reclaimed 32 KiB memory in total. + +If unsure, use only the default value (``1``) and forget about this. + skip_anon --------- diff --git a/Documentation/admin-guide/mm/damon/stat.rst b/Documentation/admin-guide/mm/damon/stat.rst index 4c517c2c219aa4..e5a5a2c4f803a0 100644 --- a/Documentation/admin-guide/mm/damon/stat.rst +++ b/Documentation/admin-guide/mm/damon/stat.rst @@ -10,6 +10,8 @@ on the system's entire physical memory using DAMON, and provides simplified access monitoring results statistics, namely idle time percentiles and estimated memory bandwidth. +.. _damon_stat_monitoring_accuracy_overhead: + Monitoring Accuracy and Overhead ================================ @@ -17,9 +19,11 @@ DAMON_STAT uses monitoring intervals :ref:`auto-tuning ` to make its accuracy high and overhead minimum. It auto-tunes the intervals aiming 4 % of observable access events to be captured in each snapshot, while limiting the resulting sampling -events to be 5 milliseconds in minimum and 10 seconds in maximum. On a few +interval to be 5 milliseconds in minimum and 10 seconds in maximum. On a few production server systems, it resulted in consuming only 0.x % single CPU time, -while capturing reasonable quality of access patterns. +while capturing reasonable quality of access patterns. The tuning-resulting +intervals can be retrieved via ``aggr_interval_us`` :ref:`parameter +`. Interface: Module Parameters ============================ @@ -41,6 +45,18 @@ You can enable DAMON_STAT by setting the value of this parameter as ``Y``. Setting it as ``N`` disables DAMON_STAT. The default value is set by ``CONFIG_DAMON_STAT_ENABLED_DEFAULT`` build config option. +.. _damon_stat_aggr_interval_us: + +aggr_interval_us +---------------- + +Auto-tuned aggregation time interval in microseconds. + +Users can read the aggregation interval of DAMON that is being used by the +DAMON instance for DAMON_STAT. It is :ref:`auto-tuned +` and therefore the value is +dynamically changed. + estimated_memory_bandwidth -------------------------- @@ -58,12 +74,13 @@ memory_idle_ms_percentiles Per-byte idle time (milliseconds) percentiles of the system. DAMON_STAT calculates how long each byte of the memory was not accessed until -now (idle time), based on the current DAMON results snapshot. If DAMON found a -region of access frequency (nr_accesses) larger than zero, every byte of the -region gets zero idle time. If a region has zero access frequency -(nr_accesses), how long the region was keeping the zero access frequency (age) -becomes the idle time of every byte of the region. Then, DAMON_STAT exposes -the percentiles of the idle time values via this read-only parameter. Reading -the parameter returns 101 idle time values in milliseconds, separated by comma. +now (idle time), based on the current DAMON results snapshot. For regions +having access frequency (nr_accesses) larger than zero, how long the current +access frequency level was kept multiplied by ``-1`` becomes the idlee time of +every byte of the region. If a region has zero access frequency (nr_accesses), +how long the region was keeping the zero access frequency (age) becomes the +idle time of every byte of the region. Then, DAMON_STAT exposes the +percentiles of the idle time values via this read-only parameter. Reading the +parameter returns 101 idle time values in milliseconds, separated by comma. Each value represents 0-th, 1st, 2nd, 3rd, ..., 99th and 100th percentile idle times. diff --git a/Documentation/admin-guide/mm/damon/usage.rst b/Documentation/admin-guide/mm/damon/usage.rst index eae534bc1bee47..9991dad60fcff7 100644 --- a/Documentation/admin-guide/mm/damon/usage.rst +++ b/Documentation/admin-guide/mm/damon/usage.rst @@ -67,7 +67,7 @@ comma (","). │ │ │ │ │ │ │ intervals_goal/access_bp,aggrs,min_sample_us,max_sample_us │ │ │ │ │ │ nr_regions/min,max │ │ │ │ │ :ref:`targets `/nr_targets - │ │ │ │ │ │ :ref:`0 `/pid_target + │ │ │ │ │ │ :ref:`0 `/pid_target,obsolete_target │ │ │ │ │ │ │ :ref:`regions `/nr_regions │ │ │ │ │ │ │ │ :ref:`0 `/start,end │ │ │ │ │ │ │ │ ... @@ -81,7 +81,7 @@ comma (","). │ │ │ │ │ │ │ :ref:`quotas `/ms,bytes,reset_interval_ms,effective_bytes │ │ │ │ │ │ │ │ weights/sz_permil,nr_accesses_permil,age_permil │ │ │ │ │ │ │ │ :ref:`goals `/nr_goals - │ │ │ │ │ │ │ │ │ 0/target_metric,target_value,current_value,nid + │ │ │ │ │ │ │ │ │ 0/target_metric,target_value,current_value,nid,path │ │ │ │ │ │ │ :ref:`watermarks `/metric,interval_us,high,mid,low │ │ │ │ │ │ │ :ref:`{core_,ops_,}filters `/nr_filters │ │ │ │ │ │ │ │ 0/type,matching,allow,memcg_path,addr_start,addr_end,target_idx,min,max @@ -134,7 +134,8 @@ Users can write below commands for the kdamond to the ``state`` file. - ``on``: Start running. - ``off``: Stop running. - ``commit``: Read the user inputs in the sysfs files except ``state`` file - again. + again. Monitoring :ref:`target region ` inputs are also be + ignored if no target region is specified. - ``update_tuned_intervals``: Update the contents of ``sample_us`` and ``aggr_us`` files of the kdamond with the auto-tuning applied ``sampling interval`` and ``aggregation interval`` for the files. Please refer to @@ -264,13 +265,20 @@ to ``N-1``. Each directory represents each monitoring target. targets// ------------ -In each target directory, one file (``pid_target``) and one directory -(``regions``) exist. +In each target directory, two files (``pid_target`` and ``obsolete_target``) +and one directory (``regions``) exist. If you wrote ``vaddr`` to the ``contexts//operations``, each target should be a process. You can specify the process to DAMON by writing the pid of the process to the ``pid_target`` file. +Users can selectively remove targets in the middle of the targets array by +writing non-zero value to ``obsolete_target`` file and committing it (writing +``commit`` to ``state`` file). DAMON will remove the matching targets from its +internal targets array. Users are responsible to construct target directories +again, so that those correctly represent the changed internal targets array. + + .. _sysfs_regions: targets//regions @@ -289,6 +297,11 @@ In the beginning, this directory has only one file, ``nr_regions``. Writing a number (``N``) to the file creates the number of child directories named ``0`` to ``N-1``. Each directory represents each initial monitoring target region. +If ``nr_regions`` is zero when committing new DAMON parameters online (writing +``commit`` to ``state`` file of :ref:`kdamond `), the commit +logic ignores the target regions. In other words, the current monitoring +results for the target are preserved. + .. _sysfs_region: regions// @@ -402,9 +415,9 @@ number (``N``) to the file creates the number of child directories named ``0`` to ``N-1``. Each directory represents each goal and current achievement. Among the multiple feedback, the best one is used. -Each goal directory contains four files, namely ``target_metric``, -``target_value``, ``current_value`` and ``nid``. Users can set and get the -four parameters for the quota auto-tuning goals that specified on the +Each goal directory contains five files, namely ``target_metric``, +``target_value``, ``current_value`` ``nid`` and ``path``. Users can set and +get the five parameters for the quota auto-tuning goals that specified on the :ref:`design doc ` by writing to and reading from each of the files. Note that users should further write ``commit_schemes_quota_goals`` to the ``state`` file of the :ref:`kdamond diff --git a/Documentation/admin-guide/mm/index.rst b/Documentation/admin-guide/mm/index.rst index ebc83ca20fdcd5..bbb563cba5d29a 100644 --- a/Documentation/admin-guide/mm/index.rst +++ b/Documentation/admin-guide/mm/index.rst @@ -39,7 +39,6 @@ the Linux memory management. shrinker_debugfs slab soft-dirty - swap_numa transhuge userfaultfd zswap diff --git a/Documentation/admin-guide/mm/pagemap.rst b/Documentation/admin-guide/mm/pagemap.rst index e60e9211fd9b2b..c57e61b5d8aa81 100644 --- a/Documentation/admin-guide/mm/pagemap.rst +++ b/Documentation/admin-guide/mm/pagemap.rst @@ -115,7 +115,8 @@ Short descriptions to the page flags A free memory block managed by the buddy system allocator. The buddy system organizes free memory in blocks of various orders. An order N block has 2^N physically contiguous pages, with the BUDDY flag - set for and _only_ for the first page. + set for all pages. + Before 4.6 only the first page of the block had the flag set. 15 - COMPOUND_HEAD A compound page with order N consists of 2^N physically contiguous pages. A compound page with order 2 takes the form of "HTTT", where H donates its diff --git a/Documentation/admin-guide/mm/swap_numa.rst b/Documentation/admin-guide/mm/swap_numa.rst deleted file mode 100644 index 2e630627bceec0..00000000000000 --- a/Documentation/admin-guide/mm/swap_numa.rst +++ /dev/null @@ -1,78 +0,0 @@ -=========================================== -Automatically bind swap device to numa node -=========================================== - -If the system has more than one swap device and swap device has the node -information, we can make use of this information to decide which swap -device to use in get_swap_pages() to get better performance. - - -How to use this feature -======================= - -Swap device has priority and that decides the order of it to be used. To make -use of automatically binding, there is no need to manipulate priority settings -for swap devices. e.g. on a 2 node machine, assume 2 swap devices swapA and -swapB, with swapA attached to node 0 and swapB attached to node 1, are going -to be swapped on. Simply swapping them on by doing:: - - # swapon /dev/swapA - # swapon /dev/swapB - -Then node 0 will use the two swap devices in the order of swapA then swapB and -node 1 will use the two swap devices in the order of swapB then swapA. Note -that the order of them being swapped on doesn't matter. - -A more complex example on a 4 node machine. Assume 6 swap devices are going to -be swapped on: swapA and swapB are attached to node 0, swapC is attached to -node 1, swapD and swapE are attached to node 2 and swapF is attached to node3. -The way to swap them on is the same as above:: - - # swapon /dev/swapA - # swapon /dev/swapB - # swapon /dev/swapC - # swapon /dev/swapD - # swapon /dev/swapE - # swapon /dev/swapF - -Then node 0 will use them in the order of:: - - swapA/swapB -> swapC -> swapD -> swapE -> swapF - -swapA and swapB will be used in a round robin mode before any other swap device. - -node 1 will use them in the order of:: - - swapC -> swapA -> swapB -> swapD -> swapE -> swapF - -node 2 will use them in the order of:: - - swapD/swapE -> swapA -> swapB -> swapC -> swapF - -Similaly, swapD and swapE will be used in a round robin mode before any -other swap devices. - -node 3 will use them in the order of:: - - swapF -> swapA -> swapB -> swapC -> swapD -> swapE - - -Implementation details -====================== - -The current code uses a priority based list, swap_avail_list, to decide -which swap device to use and if multiple swap devices share the same -priority, they are used round robin. This change here replaces the single -global swap_avail_list with a per-numa-node list, i.e. for each numa node, -it sees its own priority based list of available swap devices. Swap -device's priority can be promoted on its matching node's swap_avail_list. - -The current swap device's priority is set as: user can set a >=0 value, -or the system will pick one starting from -1 then downwards. The priority -value in the swap_avail_list is the negated value of the swap device's -due to plist being sorted from low to high. The new policy doesn't change -the semantics for priority >=0 cases, the previous starting from -1 then -downwards now becomes starting from -2 then downwards and -1 is reserved -as the promoted value. So if multiple swap devices are attached to the same -node, they will all be promoted to priority -1 on that node's plist and will -be used round robin before any other swap devices. diff --git a/Documentation/admin-guide/mm/transhuge.rst b/Documentation/admin-guide/mm/transhuge.rst index 1654211cc6cf20..5fbc3d89bb0731 100644 --- a/Documentation/admin-guide/mm/transhuge.rst +++ b/Documentation/admin-guide/mm/transhuge.rst @@ -381,6 +381,11 @@ hugepage allocation policy for the tmpfs mount by using the kernel parameter four valid policies for tmpfs (``always``, ``within_size``, ``advise``, ``never``). The tmpfs mount default policy is ``never``. +Additionally, Kconfig options are available to set the default hugepage +policies for shmem (``CONFIG_TRANSPARENT_HUGEPAGE_SHMEM_HUGE_*``) and tmpfs +(``CONFIG_TRANSPARENT_HUGEPAGE_TMPFS_HUGE_*``) at build time. Refer to the +Kconfig help for more details. + In the same manner as ``thp_anon`` controls each supported anonymous THP size, ``thp_shmem`` controls each supported shmem THP size. ``thp_shmem`` has the same format as ``thp_anon``, but also supports the policy diff --git a/Documentation/admin-guide/mm/zswap.rst b/Documentation/admin-guide/mm/zswap.rst index 283d77217c6fd7..2464425c783de2 100644 --- a/Documentation/admin-guide/mm/zswap.rst +++ b/Documentation/admin-guide/mm/zswap.rst @@ -59,11 +59,11 @@ returned by the allocation routine and that handle must be mapped before being accessed. The compressed memory pool grows on demand and shrinks as compressed pages are freed. The pool is not preallocated. -When a swap page is passed from swapout to zswap, zswap maintains a mapping -of the swap entry, a combination of the swap type and swap offset, to the -zsmalloc handle that references that compressed swap page. This mapping is -achieved with a red-black tree per swap type. The swap offset is the search -key for the tree nodes. +When a swap page is passed from swapout to zswap, zswap maintains a mapping of +the swap entry, a combination of the swap type and swap offset, to the zsmalloc +handle that references that compressed swap page. This mapping is achieved +with an xarray per swap type. The swap offset is the search key for the xarray +nodes. During a page fault on a PTE that is a swap entry, the swapin code calls the zswap load function to decompress the page into the page allocated by the page diff --git a/Documentation/admin-guide/pm/cpuidle.rst b/Documentation/admin-guide/pm/cpuidle.rst index 0c090b076224c0..be4c1120e3f0b6 100644 --- a/Documentation/admin-guide/pm/cpuidle.rst +++ b/Documentation/admin-guide/pm/cpuidle.rst @@ -580,6 +580,15 @@ the given CPU as the upper limit for the exit latency of the idle states that they are allowed to select for that CPU. They should never select any idle states with exit latency beyond that limit. +While the above CPU QoS constraints apply to CPU idle time management, user +space may also request a CPU system wakeup latency QoS limit, via the +`cpu_wakeup_latency` file. This QoS constraint is respected when selecting a +suitable idle state for the CPUs, while entering the system-wide suspend-to-idle +sleep state, but also to the regular CPU idle time management. + +Note that, the management of the `cpu_wakeup_latency` file works according to +the 'cpu_dma_latency' file from user space point of view. Moreover, the unit +is also microseconds. Idle States Control Via Kernel Command Line =========================================== diff --git a/Documentation/admin-guide/pm/intel_pstate.rst b/Documentation/admin-guide/pm/intel_pstate.rst index 26e702c7016e57..fde967b0c2e0e5 100644 --- a/Documentation/admin-guide/pm/intel_pstate.rst +++ b/Documentation/admin-guide/pm/intel_pstate.rst @@ -48,8 +48,9 @@ only way to pass early-configuration-time parameters to it is via the kernel command line. However, its configuration can be adjusted via ``sysfs`` to a great extent. In some configurations it even is possible to unregister it via ``sysfs`` which allows another ``CPUFreq`` scaling driver to be loaded and -registered (see `below `_). +registered (see :ref:`below `). +.. _operation_modes: Operation Modes =============== @@ -62,6 +63,8 @@ a certain performance scaling algorithm. Which of them will be in effect depends on what kernel command line options are used and on the capabilities of the processor. +.. _active_mode: + Active Mode ----------- @@ -94,6 +97,8 @@ Which of the P-state selection algorithms is used by default depends on the Namely, if that option is set, the ``performance`` algorithm will be used by default, and the other one will be used by default if it is not set. +.. _active_mode_hwp: + Active Mode With HWP ~~~~~~~~~~~~~~~~~~~~ @@ -123,7 +128,7 @@ Energy-Performance Bias (EPB) knob (otherwise), which means that the processor's internal P-state selection logic is expected to focus entirely on performance. This will override the EPP/EPB setting coming from the ``sysfs`` interface -(see `Energy vs Performance Hints`_ below). Moreover, any attempts to change +(see :ref:`energy_performance_hints` below). Moreover, any attempts to change the EPP/EPB to a value different from 0 ("performance") via ``sysfs`` in this configuration will be rejected. @@ -192,6 +197,8 @@ This is the default P-state selection algorithm if the :c:macro:`CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE` kernel configuration option is not set. +.. _passive_mode: + Passive Mode ------------ @@ -289,12 +296,12 @@ Unlike ``_PSS`` objects in the ACPI tables, ``intel_pstate`` always exposes the entire range of available P-states, including the whole turbo range, to the ``CPUFreq`` core and (in the passive mode) to generic scaling governors. This generally causes turbo P-states to be set more often when ``intel_pstate`` is -used relative to ACPI-based CPU performance scaling (see `below `_ -for more information). +used relative to ACPI-based CPU performance scaling (see +:ref:`below ` for more information). Moreover, since ``intel_pstate`` always knows what the real turbo threshold is (even if the Configurable TDP feature is enabled in the processor), its -``no_turbo`` attribute in ``sysfs`` (described `below `_) should +``no_turbo`` attribute in ``sysfs`` (described :ref:`below `) should work as expected in all cases (that is, if set to disable turbo P-states, it always should prevent ``intel_pstate`` from using them). @@ -307,12 +314,12 @@ pieces of information on it to be known, including: * The minimum supported P-state. - * The maximum supported `non-turbo P-state `_. + * The maximum supported :ref:`non-turbo P-state `. * Whether or not turbo P-states are supported at all. - * The maximum supported `one-core turbo P-state `_ (if turbo P-states - are supported). + * The maximum supported :ref:`one-core turbo P-state ` (if turbo + P-states are supported). * The scaling formula to translate the driver's internal representation of P-states into frequencies and the other way around. @@ -400,10 +407,10 @@ Energy-Aware Scheduling Support If ``CONFIG_ENERGY_MODEL`` has been set during kernel configuration and ``intel_pstate`` runs on a hybrid processor without SMT, in addition to enabling -`CAS `_ it registers an Energy Model for the processor. This allows the +:ref:`CAS` it registers an Energy Model for the processor. This allows the Energy-Aware Scheduling (EAS) support to be enabled in the CPU scheduler if ``schedutil`` is used as the ``CPUFreq`` governor which requires ``intel_pstate`` -to operate in the `passive mode `_. +to operate in the :ref:`passive mode `. The Energy Model registered by ``intel_pstate`` is artificial (that is, it is based on abstract cost values and it does not include any real power numbers) @@ -432,6 +439,8 @@ the ``energy_model`` directory in ``debugfs`` (typlically mounted on User Space Interface in ``sysfs`` ================================= +.. _global_attributes: + Global Attributes ----------------- @@ -444,8 +453,8 @@ argument is passed to the kernel in the command line. ``max_perf_pct`` Maximum P-state the driver is allowed to set in percent of the - maximum supported performance level (the highest supported `turbo - P-state `_). + maximum supported performance level (the highest supported :ref:`turbo + P-state `). This attribute will not be exposed if the ``intel_pstate=per_cpu_perf_limits`` argument is present in the kernel @@ -453,8 +462,8 @@ argument is passed to the kernel in the command line. ``min_perf_pct`` Minimum P-state the driver is allowed to set in percent of the - maximum supported performance level (the highest supported `turbo - P-state `_). + maximum supported performance level (the highest supported :ref:`turbo + P-state `). This attribute will not be exposed if the ``intel_pstate=per_cpu_perf_limits`` argument is present in the kernel @@ -463,18 +472,18 @@ argument is passed to the kernel in the command line. ``num_pstates`` Number of P-states supported by the processor (between 0 and 255 inclusive) including both turbo and non-turbo P-states (see - `Turbo P-states Support`_). + :ref:`turbo`). This attribute is present only if the value exposed by it is the same for all of the CPUs in the system. The value of this attribute is not affected by the ``no_turbo`` - setting described `below `_. + setting described :ref:`below `. This attribute is read-only. ``turbo_pct`` - Ratio of the `turbo range `_ size to the size of the entire + Ratio of the :ref:`turbo range ` size to the size of the entire range of supported P-states, in percent. This attribute is present only if the value exposed by it is the same @@ -486,7 +495,7 @@ argument is passed to the kernel in the command line. ``no_turbo`` If set (equal to 1), the driver is not allowed to set any turbo P-states - (see `Turbo P-states Support`_). If unset (equal to 0, which is the + (see :ref:`turbo`). If unset (equal to 0, which is the default), turbo P-states can be set by the driver. [Note that ``intel_pstate`` does not support the general ``boost`` attribute (supported by some other scaling drivers) which is replaced @@ -495,11 +504,11 @@ argument is passed to the kernel in the command line. This attribute does not affect the maximum supported frequency value supplied to the ``CPUFreq`` core and exposed via the policy interface, but it affects the maximum possible value of per-policy P-state limits - (see `Interpretation of Policy Attributes`_ below for details). + (see :ref:`policy_attributes_interpretation` below for details). ``hwp_dynamic_boost`` This attribute is only present if ``intel_pstate`` works in the - `active mode with the HWP feature enabled `_ in + :ref:`active mode with the HWP feature enabled ` in the processor. If set (equal to 1), it causes the minimum P-state limit to be increased dynamically for a short time whenever a task previously waiting on I/O is selected to run on a given logical CPU (the purpose @@ -514,12 +523,12 @@ argument is passed to the kernel in the command line. Operation mode of the driver: "active", "passive" or "off". "active" - The driver is functional and in the `active mode - `_. + The driver is functional and in the :ref:`active mode + `. "passive" - The driver is functional and in the `passive mode - `_. + The driver is functional and in the :ref:`passive mode + `. "off" The driver is not functional (it is not registered as a scaling @@ -547,13 +556,15 @@ argument is passed to the kernel in the command line. attribute to "1" enables the energy-efficiency optimizations and setting to "0" disables them. +.. _policy_attributes_interpretation: + Interpretation of Policy Attributes ----------------------------------- The interpretation of some ``CPUFreq`` policy attributes described in Documentation/admin-guide/pm/cpufreq.rst is special with ``intel_pstate`` as the current scaling driver and it generally depends on the driver's -`operation mode `_. +:ref:`operation mode `. First of all, the values of the ``cpuinfo_max_freq``, ``cpuinfo_min_freq`` and ``scaling_cur_freq`` attributes are produced by applying a processor-specific @@ -562,9 +573,10 @@ Also, the values of the ``scaling_max_freq`` and ``scaling_min_freq`` attributes are capped by the frequency corresponding to the maximum P-state that the driver is allowed to set. -If the ``no_turbo`` `global attribute `_ is set, the driver is -not allowed to use turbo P-states, so the maximum value of ``scaling_max_freq`` -and ``scaling_min_freq`` is limited to the maximum non-turbo P-state frequency. +If the ``no_turbo`` :ref:`global attribute ` is set, the driver +is not allowed to use turbo P-states, so the maximum value of +``scaling_max_freq`` and ``scaling_min_freq`` is limited to the maximum +non-turbo P-state frequency. Accordingly, setting ``no_turbo`` causes ``scaling_max_freq`` and ``scaling_min_freq`` to go down to that value if they were above it before. However, the old values of ``scaling_max_freq`` and ``scaling_min_freq`` will be @@ -576,7 +588,7 @@ and ``scaling_min_freq`` corresponds to the maximum supported turbo P-state, which also is the value of ``cpuinfo_max_freq`` in either case. Next, the following policy attributes have special meaning if -``intel_pstate`` works in the `active mode `_: +``intel_pstate`` works in the :ref:`active mode `: ``scaling_available_governors`` List of P-state selection algorithms provided by ``intel_pstate``. @@ -597,20 +609,22 @@ processor: Shows the base frequency of the CPU. Any frequency above this will be in the turbo frequency range. -The meaning of these attributes in the `passive mode `_ is the +The meaning of these attributes in the :ref:`passive mode ` is the same as for other scaling drivers. Additionally, the value of the ``scaling_driver`` attribute for ``intel_pstate`` depends on the operation mode of the driver. Namely, it is either -"intel_pstate" (in the `active mode `_) or "intel_cpufreq" (in the -`passive mode `_). +"intel_pstate" (in the :ref:`active mode `) or "intel_cpufreq" +(in the :ref:`passive mode `). + +.. _pstate_limits_coordination: Coordination of P-State Limits ------------------------------ ``intel_pstate`` allows P-state limits to be set in two ways: with the help of -the ``max_perf_pct`` and ``min_perf_pct`` `global attributes -`_ or via the ``scaling_max_freq`` and ``scaling_min_freq`` +the ``max_perf_pct`` and ``min_perf_pct`` :ref:`global attributes +` or via the ``scaling_max_freq`` and ``scaling_min_freq`` ``CPUFreq`` policy attributes. The coordination between those limits is based on the following rules, regardless of the current operation mode of the driver: @@ -632,17 +646,18 @@ on the following rules, regardless of the current operation mode of the driver: 3. The global and per-policy limits can be set independently. -In the `active mode with the HWP feature enabled `_, the +In the :ref:`active mode with the HWP feature enabled `, the resulting effective values are written into hardware registers whenever the limits change in order to request its internal P-state selection logic to always set P-states within these limits. Otherwise, the limits are taken into account -by scaling governors (in the `passive mode `_) and by the driver -every time before setting a new P-state for a CPU. +by scaling governors (in the :ref:`passive mode `) and by the +driver every time before setting a new P-state for a CPU. Additionally, if the ``intel_pstate=per_cpu_perf_limits`` command line argument is passed to the kernel, ``max_perf_pct`` and ``min_perf_pct`` are not exposed at all and the only way to set the limits is by using the policy attributes. +.. _energy_performance_hints: Energy vs Performance Hints --------------------------- @@ -702,9 +717,9 @@ output. On those systems each ``_PSS`` object returns a list of P-states supported by the corresponding CPU which basically is a subset of the P-states range that can be used by ``intel_pstate`` on the same system, with one exception: the whole -`turbo range `_ is represented by one item in it (the topmost one). By -convention, the frequency returned by ``_PSS`` for that item is greater by 1 MHz -than the frequency of the highest non-turbo P-state listed by it, but the +:ref:`turbo range ` is represented by one item in it (the topmost one). +By convention, the frequency returned by ``_PSS`` for that item is greater by +1 MHz than the frequency of the highest non-turbo P-state listed by it, but the corresponding P-state representation (following the hardware specification) returned for it matches the maximum supported turbo P-state (or is the special value 255 meaning essentially "go as high as you can get"). @@ -730,18 +745,18 @@ benefit from running at turbo frequencies will be given non-turbo P-states instead. One more issue related to that may appear on systems supporting the -`Configurable TDP feature `_ allowing the platform firmware to set the -turbo threshold. Namely, if that is not coordinated with the lists of P-states -returned by ``_PSS`` properly, there may be more than one item corresponding to -a turbo P-state in those lists and there may be a problem with avoiding the -turbo range (if desirable or necessary). Usually, to avoid using turbo -P-states overall, ``acpi-cpufreq`` simply avoids using the topmost state listed -by ``_PSS``, but that is not sufficient when there are other turbo P-states in -the list returned by it. +:ref:`Configurable TDP feature ` allowing the platform firmware to set +the turbo threshold. Namely, if that is not coordinated with the lists of +P-states returned by ``_PSS`` properly, there may be more than one item +corresponding to a turbo P-state in those lists and there may be a problem with +avoiding the turbo range (if desirable or necessary). Usually, to avoid using +turbo P-states overall, ``acpi-cpufreq`` simply avoids using the topmost state +listed by ``_PSS``, but that is not sufficient when there are other turbo +P-states in the list returned by it. Apart from the above, ``acpi-cpufreq`` works like ``intel_pstate`` in the -`passive mode `_, except that the number of P-states it can set -is limited to the ones listed by the ACPI ``_PSS`` objects. +:ref:`passive mode `, except that the number of P-states it can +set is limited to the ones listed by the ACPI ``_PSS`` objects. Kernel Command Line Options for ``intel_pstate`` @@ -756,11 +771,11 @@ of them have to be prepended with the ``intel_pstate=`` prefix. processor is supported by it. ``active`` - Register ``intel_pstate`` in the `active mode `_ to start - with. + Register ``intel_pstate`` in the :ref:`active mode ` to + start with. ``passive`` - Register ``intel_pstate`` in the `passive mode `_ to + Register ``intel_pstate`` in the :ref:`passive mode ` to start with. ``force`` @@ -793,12 +808,12 @@ of them have to be prepended with the ``intel_pstate=`` prefix. and this option has no effect. ``per_cpu_perf_limits`` - Use per-logical-CPU P-State limits (see `Coordination of P-state - Limits`_ for details). + Use per-logical-CPU P-State limits (see + :ref:`pstate_limits_coordination` for details). ``no_cas`` - Do not enable `capacity-aware scheduling `_ which is enabled by - default on hybrid systems without SMT. + Do not enable :ref:`capacity-aware scheduling ` which is enabled + by default on hybrid systems without SMT. Diagnostics and Tuning ====================== @@ -810,7 +825,7 @@ There are two static trace events that can be used for ``intel_pstate`` diagnostics. One of them is the ``cpu_frequency`` trace event generally used by ``CPUFreq``, and the other one is the ``pstate_sample`` trace event specific to ``intel_pstate``. Both of them are triggered by ``intel_pstate`` only if -it works in the `active mode `_. +it works in the :ref:`active mode `. The following sequence of shell commands can be used to enable them and see their output (if the kernel is generally configured to support event tracing):: @@ -822,7 +837,7 @@ their output (if the kernel is generally configured to support event tracing):: gnome-terminal--4510 [001] ..s. 1177.680733: pstate_sample: core_busy=107 scaled=94 from=26 to=26 mperf=1143818 aperf=1230607 tsc=29838618 freq=2474476 cat-5235 [002] ..s. 1177.681723: cpu_frequency: state=2900000 cpu_id=2 -If ``intel_pstate`` works in the `passive mode `_, the +If ``intel_pstate`` works in the :ref:`passive mode `, the ``cpu_frequency`` trace event will be triggered either by the ``schedutil`` scaling governor (for the policies it is attached to), or by the ``CPUFreq`` core (for the policies with other scaling governors). diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst index f3ee807b5d8b3c..239da22c4e28f1 100644 --- a/Documentation/admin-guide/sysctl/kernel.rst +++ b/Documentation/admin-guide/sysctl/kernel.rst @@ -397,13 +397,14 @@ a hung task is detected. hung_task_panic =============== -Controls the kernel's behavior when a hung task is detected. +When set to a non-zero value, a kernel panic will be triggered if the +number of hung tasks found during a single scan reaches this value. This file shows up if ``CONFIG_DETECT_HUNG_TASK`` is enabled. -= ================================================= += ======================================================= 0 Continue operation. This is the default behavior. -1 Panic immediately. -= ================================================= +N Panic when N hung tasks are found during a single scan. += ======================================================= hung_task_check_count @@ -421,6 +422,11 @@ the system boot. This file shows up if ``CONFIG_DETECT_HUNG_TASK`` is enabled. +hung_task_sys_info +================== +A comma separated list of extra system information to be dumped when +hung task is detected, for example, "tasks,mem,timers,locks,...". +Refer 'panic_sys_info' section below for more details. hung_task_timeout_secs ====================== @@ -515,6 +521,15 @@ default), only processes with the CAP_SYS_ADMIN capability may create io_uring instances. +kernel_sys_info +=============== +A comma separated list of extra system information to be dumped when +soft/hard lockup is detected, for example, "tasks,mem,timers,locks,...". +Refer 'panic_sys_info' section below for more details. + +It serves as the default kernel control knob, which will take effect +when a kernel module calls sys_info() with parameter==0. + kexec_load_disabled =================== @@ -576,6 +591,11 @@ if leaking kernel pointer values to unprivileged users is a concern. When ``kptr_restrict`` is set to 2, kernel pointers printed using %pK will be replaced with 0s regardless of privileges. +softlockup_sys_info & hardlockup_sys_info +========================================= +A comma separated list of extra system information to be dumped when +soft/hard lockup is detected, for example, "tasks,mem,timers,locks,...". +Refer 'panic_sys_info' section below for more details. modprobe ======== @@ -910,8 +930,8 @@ to 'panic_print'. Possible values are: ============= =================================================== tasks print all tasks info mem print system memory info -timer print timers info -lock print locks info if CONFIG_LOCKDEP is on +timers print timers info +locks print locks info if CONFIG_LOCKDEP is on ftrace print ftrace buffer all_bt print all CPUs backtrace (if available in the arch) blocked_tasks print only tasks in uninterruptible (blocked) state diff --git a/Documentation/admin-guide/sysctl/net.rst b/Documentation/admin-guide/sysctl/net.rst index 2ef50828aff16b..369a738a68193e 100644 --- a/Documentation/admin-guide/sysctl/net.rst +++ b/Documentation/admin-guide/sysctl/net.rst @@ -212,6 +212,14 @@ mem_pcpu_rsv Per-cpu reserved forward alloc cache size in page units. Default 1MB per CPU. +bypass_prot_mem +--------------- + +Skip charging socket buffers to the global per-protocol memory +accounting controlled by net.ipv4.tcp_mem, net.ipv4.udp_mem, etc. + +Default: 0 (off) + rmem_default ------------ @@ -347,9 +355,9 @@ skb_defer_max ------------- Max size (in skbs) of the per-cpu list of skbs being freed -by the cpu which allocated them. Used by TCP stack so far. +by the cpu which allocated them. -Default: 64 +Default: 128 optmem_max ---------- @@ -406,6 +414,23 @@ to SOCK_TXREHASH_DEFAULT (i. e. not overridden by setsockopt). If set to 1 (default), hash rethink is performed on listening socket. If set to 0, hash rethink is not performed. +txq_reselection_ms +------------------ + +Controls how often (in ms) a busy connected flow can select another tx queue. + +A resection is desirable when/if user thread has migrated and XPS +would select a different queue. Same can occur without XPS +if the flow hash has changed. + +But switching txq can introduce reorders, especially if the +old queue is under high pressure. Modern TCP stacks deal +well with reorders if they happen not too often. + +To disable this feature, set the value to 0. + +Default : 1000 + gro_normal_batch ---------------- diff --git a/Documentation/admin-guide/tainted-kernels.rst b/Documentation/admin-guide/tainted-kernels.rst index a0cc017e44246f..ed1f8f1e86c58f 100644 --- a/Documentation/admin-guide/tainted-kernels.rst +++ b/Documentation/admin-guide/tainted-kernels.rst @@ -186,6 +186,6 @@ More detailed explanation for tainting 18) ``N`` if an in-kernel test, such as a KUnit test, has been run. - 19) ``J`` if userpace opened /dev/fwctl/* and performed a FWTCL_RPC_DEBUG_WRITE + 19) ``J`` if userspace opened /dev/fwctl/* and performed a FWTCL_RPC_DEBUG_WRITE to use the devices debugging features. Device debugging features could cause the device to malfunction in undefined ways. diff --git a/Documentation/admin-guide/thermal/index.rst b/Documentation/admin-guide/thermal/index.rst index 193b7b01a87d7e..e48bc0a1951b88 100644 --- a/Documentation/admin-guide/thermal/index.rst +++ b/Documentation/admin-guide/thermal/index.rst @@ -6,3 +6,4 @@ Thermal Subsystem :maxdepth: 1 intel_powerclamp + intel_thermal_throttle diff --git a/Documentation/admin-guide/thermal/intel_thermal_throttle.rst b/Documentation/admin-guide/thermal/intel_thermal_throttle.rst new file mode 100644 index 00000000000000..f4fbf9d5a4ec56 --- /dev/null +++ b/Documentation/admin-guide/thermal/intel_thermal_throttle.rst @@ -0,0 +1,91 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: + +======================================= +Intel thermal throttle events reporting +======================================= + +:Author: Srinivas Pandruvada + +Introduction +------------ + +Intel processors have built in automatic and adaptive thermal monitoring +mechanisms that force the processor to reduce its power consumption in order +to operate within predetermined temperature limits. + +Refer to section "THERMAL MONITORING AND PROTECTION" in the "Intel® 64 and +IA-32 Architectures Software Developer’s Manual Volume 3 (3A, 3B, 3C, & 3D): +System Programming Guide" for more details. + +In general, there are two mechanisms to control the core temperature of the +processor. They are called "Thermal Monitor 1 (TM1) and Thermal Monitor 2 (TM2)". + +The status of the temperature sensor that triggers the thermal monitor (TM1/TM2) +is indicated through the "thermal status flag" and "thermal status log flag" in +MSR_IA32_THERM_STATUS for core level and MSR_IA32_PACKAGE_THERM_STATUS for +package level. + +Thermal Status flag, bit 0 — When set, indicates that the processor core +temperature is currently at the trip temperature of the thermal monitor and that +the processor power consumption is being reduced via either TM1 or TM2, depending +on which is enabled. When clear, the flag indicates that the core temperature is +below the thermal monitor trip temperature. This flag is read only. + +Thermal Status Log flag, bit 1 — When set, indicates that the thermal sensor has +tripped since the last power-up or reset or since the last time that software +cleared this flag. This flag is a sticky bit; once set it remains set until +cleared by software or until a power-up or reset of the processor. The default +state is clear. + +It is possible that when user reads MSR_IA32_THERM_STATUS or +MSR_IA32_PACKAGE_THERM_STATUS, TM1/TM2 is not active. In this case, +"Thermal Status flag" will read "0" and the "Thermal Status Log flag" will be set +to show any previous "TM1/TM2" activation. But since it needs to be cleared by +the software, it can't show the number of occurrences of "TM1/TM2" activations. + +Hence, Linux provides counters of how many times the "Thermal Status flag" was +set. Also presents how long the "Thermal Status flag" was active in milliseconds. +Using these counters, users can check if the performance was limited because of +thermal events. It is recommended to read from sysfs instead of directly reading +MSRs as the "Thermal Status Log flag" is reset by the driver to implement rate +control. + +Sysfs Interface +--------------- + +Thermal throttling events are presented for each CPU under +"/sys/devices/system/cpu/cpuX/thermal_throttle/", where "X" is the CPU number. + +All these counters are read-only. They can't be reset to 0. So, they can potentially +overflow after reaching the maximum 64 bit unsigned integer. + +``core_throttle_count`` + Shows the number of times "Thermal Status flag" changed from 0 to 1 for this + CPU since OS boot and thermal vector is initialized. This is a 64 bit counter. + +``package_throttle_count`` + Shows the number of times "Thermal Status flag" changed from 0 to 1 for the + package containing this CPU since OS boot and thermal vector is initialized. + Package status is broadcast to all CPUs; all CPUs in the package increment + this count. This is a 64-bit counter. + +``core_throttle_max_time_ms`` + Shows the maximum amount of time for which "Thermal Status flag" has been + set to 1 for this CPU at the core level since OS boot and thermal vector + is initialized. + +``package_throttle_max_time_ms`` + Shows the maximum amount of time for which "Thermal Status flag" has been + set to 1 for the package containing this CPU since OS boot and thermal + vector is initialized. + +``core_throttle_total_time_ms`` + Shows the cumulative time for which "Thermal Status flag" has been + set to 1 for this CPU for core level since OS boot and thermal vector + is initialized. + +``package_throttle_total_time_ms`` + Shows the cumulative time for which "Thermal Status flag" has been set + to 1 for the package containing this CPU since OS boot and thermal vector + is initialized. diff --git a/Documentation/admin-guide/thunderbolt.rst b/Documentation/admin-guide/thunderbolt.rst index 102c693c8f8163..07303c1346fbd7 100644 --- a/Documentation/admin-guide/thunderbolt.rst +++ b/Documentation/admin-guide/thunderbolt.rst @@ -203,10 +203,10 @@ host controller or a device, it is important that the firmware can be upgraded to the latest where possible bugs in it have been fixed. Typically OEMs provide this firmware from their support site. -There is also a central site which has links where to download firmware -for some machines: - - `Thunderbolt Updates `_ +Currently, recommended method of updating firmware is through "fwupd" tool. +It uses LVFS (Linux Vendor Firmware Service) portal by default to get the +latest firmware from hardware vendors and updates connected devices if found +compatible. For details refer to: https://github.com/fwupd/fwupd. Before you upgrade firmware on a device, host or retimer, please make sure it is a suitable upgrade. Failing to do that may render the device @@ -215,18 +215,40 @@ tools! Host NVM upgrade on Apple Macs is not supported. -Once the NVM image has been downloaded, you need to plug in a -Thunderbolt device so that the host controller appears. It does not -matter which device is connected (unless you are upgrading NVM on a -device - then you need to connect that particular device). +Fwupd is installed by default. If you don't have it on your system, simply +use your distro package manager to get it. + +To see possible updates through fwupd, you need to plug in a Thunderbolt +device so that the host controller appears. It does not matter which +device is connected (unless you are upgrading NVM on a device - then you +need to connect that particular device). Note an OEM-specific method to power the controller up ("force power") may be available for your system in which case there is no need to plug in a Thunderbolt device. -After that we can write the firmware to the non-active parts of the NVM -of the host or device. As an example here is how Intel NUC6i7KYK (Skull -Canyon) Thunderbolt controller NVM is upgraded:: +Updating firmware using fwupd is straightforward - refer to official +readme on fwupd github. + +If firmware image is written successfully, the device shortly disappears. +Once it comes back, the driver notices it and initiates a full power +cycle. After a while device appears again and this time it should be +fully functional. + +Device of interest should display new version under "Current version" +and "Update State: Success" in fwupd's interface. + +Upgrading firmware manually +--------------------------------------------------------------- +If possible, use fwupd to updated the firmware. However, if your device OEM +has not uploaded the firmware to LVFS, but it is available for download +from their side, you can use method below to directly upgrade the +firmware. + +Manual firmware update can be done with 'dd' tool. To update firmware +using this method, you need to write it to the non-active parts of NVM +of the host or device. Example on how to update Intel NUC6i7KYK +(Skull Canyon) Thunderbolt controller NVM:: # dd if=KYK_TBT_FW_0018.bin of=/sys/bus/thunderbolt/devices/0-0/nvm_non_active0/nvmem @@ -235,10 +257,8 @@ upgrade process as follows:: # echo 1 > /sys/bus/thunderbolt/devices/0-0/nvm_authenticate -If no errors are returned, the host controller shortly disappears. Once -it comes back the driver notices it and initiates a full power cycle. -After a while the host controller appears again and this time it should -be fully functional. +If no errors are returned, device should behave as described in previous +section. We can verify that the new NVM firmware is active by running the following commands:: diff --git a/Documentation/admin-guide/workload-tracing.rst b/Documentation/admin-guide/workload-tracing.rst index d6313890ee41ea..35963491b9f196 100644 --- a/Documentation/admin-guide/workload-tracing.rst +++ b/Documentation/admin-guide/workload-tracing.rst @@ -196,11 +196,11 @@ Let’s checkout the latest Linux repository and build cscope database:: cscope -R -p10 # builds cscope.out database before starting browse session cscope -d -p10 # starts browse session on cscope.out database -Note: Run "cscope -R -p10" to build the database and c"scope -d -p10" to -enter into the browsing session. cscope by default cscope.out database. -To get out of this mode press ctrl+d. -p option is used to specify the -number of file path components to display. -p10 is optimal for browsing -kernel sources. +Note: Run "cscope -R -p10" to build the database and "cscope -d -p10" to +enter into the browsing session. cscope by default uses the cscope.out +database. To get out of this mode press ctrl+d. -p option is used to +specify the number of file path components to display. -p10 is optimal +for browsing kernel sources. What is perf and how do we use it? ================================== diff --git a/Documentation/arch/arm64/booting.rst b/Documentation/arch/arm64/booting.rst index e4f953839f7181..26efca09aef35f 100644 --- a/Documentation/arch/arm64/booting.rst +++ b/Documentation/arch/arm64/booting.rst @@ -391,13 +391,13 @@ Before jumping into the kernel, the following conditions must be met: - SMCR_EL2.LEN must be initialised to the same value for all CPUs the kernel will execute on. - - HWFGRTR_EL2.nTPIDR2_EL0 (bit 55) must be initialised to 0b01. + - HFGRTR_EL2.nTPIDR2_EL0 (bit 55) must be initialised to 0b01. - - HWFGWTR_EL2.nTPIDR2_EL0 (bit 55) must be initialised to 0b01. + - HFGWTR_EL2.nTPIDR2_EL0 (bit 55) must be initialised to 0b01. - - HWFGRTR_EL2.nSMPRI_EL1 (bit 54) must be initialised to 0b01. + - HFGRTR_EL2.nSMPRI_EL1 (bit 54) must be initialised to 0b01. - - HWFGWTR_EL2.nSMPRI_EL1 (bit 54) must be initialised to 0b01. + - HFGWTR_EL2.nSMPRI_EL1 (bit 54) must be initialised to 0b01. For CPUs with the Scalable Matrix Extension FA64 feature (FEAT_SME_FA64): diff --git a/Documentation/arch/arm64/sve.rst b/Documentation/arch/arm64/sve.rst index 28152492c29cbc..a61c9d0efe4d81 100644 --- a/Documentation/arch/arm64/sve.rst +++ b/Documentation/arch/arm64/sve.rst @@ -402,6 +402,11 @@ The regset data starts with struct user_sve_header, containing: streaming mode and any SETREGSET of NT_ARM_SSVE will enter streaming mode if the target was not in streaming mode. +* On systems that do not support SVE it is permitted to use SETREGSET to + write SVE_PT_REGS_FPSIMD formatted data via NT_ARM_SVE, in this case the + vector length should be specified as 0. This allows streaming mode to be + disabled on systems with SME but not SVE. + * If any register data is provided along with SVE_PT_VL_ONEXEC then the registers data will be interpreted with the current vector length, not the vector length configured for use on exec. diff --git a/Documentation/arch/riscv/hwprobe.rst b/Documentation/arch/riscv/hwprobe.rst index 2f449c9b15bdd6..641ec4abb90622 100644 --- a/Documentation/arch/riscv/hwprobe.rst +++ b/Documentation/arch/riscv/hwprobe.rst @@ -249,6 +249,9 @@ The following keys are defined: defined in the in the RISC-V ISA manual starting from commit e87412e621f1 ("integrate Zaamo and Zalrsc text (#1304)"). + * :c:macro:`RISCV_HWPROBE_EXT_ZALASR`: The Zalasr extension is supported as + frozen at commit 194f0094 ("Version 0.9 for freeze") of riscv-zalasr. + * :c:macro:`RISCV_HWPROBE_EXT_ZALRSC`: The Zalrsc extension is supported as defined in the in the RISC-V ISA manual starting from commit e87412e621f1 ("integrate Zaamo and Zalrsc text (#1304)"). @@ -275,6 +278,17 @@ The following keys are defined: ratified in commit 49f49c842ff9 ("Update to Rafified state") of riscv-zabha. + * :c:macro:`RISCV_HWPROBE_EXT_ZICBOP`: The Zicbop extension is supported, as + ratified in commit 3dd606f ("Create cmobase-v1.0.pdf") of riscv-CMOs. + + * :c:macro:`RISCV_HWPROBE_EXT_ZILSD`: The Zilsd extension is supported as + defined in the RISC-V ISA manual starting from commit f88abf1 ("Integrating + load/store pair for RV32 with the main manual") of the riscv-isa-manual. + + * :c:macro:`RISCV_HWPROBE_EXT_ZCLSD`: The Zclsd extension is supported as + defined in the RISC-V ISA manual starting from commit f88abf1 ("Integrating + load/store pair for RV32 with the main manual") of the riscv-isa-manual. + * :c:macro:`RISCV_HWPROBE_KEY_CPUPERF_0`: Deprecated. Returns similar values to :c:macro:`RISCV_HWPROBE_KEY_MISALIGNED_SCALAR_PERF`, but the key was mistakenly classified as a bitmask rather than a value. @@ -369,4 +383,7 @@ The following keys are defined: * :c:macro:`RISCV_HWPROBE_VENDOR_EXT_XSFVFWMACCQQQ`: The Xsfvfwmaccqqq vendor extension is supported in version 1.0 of Matrix Multiply Accumulate - Instruction Extensions Specification. \ No newline at end of file + Instruction Extensions Specification. + +* :c:macro:`RISCV_HWPROBE_KEY_ZICBOP_BLOCK_SIZE`: An unsigned int which + represents the size of the Zicbop block in bytes. diff --git a/Documentation/arch/s390/s390dbf.rst b/Documentation/arch/s390/s390dbf.rst index af8bdc3629e72a..aad6d88974fe58 100644 --- a/Documentation/arch/s390/s390dbf.rst +++ b/Documentation/arch/s390/s390dbf.rst @@ -243,9 +243,8 @@ Examples: Changing the size of debug areas ------------------------------------ -It is possible the change the size of debug areas through piping -the number of pages to the debugfs file "pages". The resize request will -also flush the debug areas. +To resize a debug area, write the desired page count to the "pages" file. +Existing data is preserved if it fits; otherwise, oldest entries are dropped. Example: diff --git a/Documentation/arch/x86/boot.rst b/Documentation/arch/x86/boot.rst index 77e6163288db08..dca3875a24351e 100644 --- a/Documentation/arch/x86/boot.rst +++ b/Documentation/arch/x86/boot.rst @@ -95,26 +95,26 @@ Memory Layout The traditional memory map for the kernel loader, used for Image or zImage kernels, typically looks like:: - | | + | | 0A0000 +------------------------+ - | Reserved for BIOS | Do not use. Reserved for BIOS EBDA. + | Reserved for BIOS | Do not use. Reserved for BIOS EBDA. 09A000 +------------------------+ - | Command line | - | Stack/heap | For use by the kernel real-mode code. + | Command line | + | Stack/heap | For use by the kernel real-mode code. 098000 +------------------------+ - | Kernel setup | The kernel real-mode code. + | Kernel setup | The kernel real-mode code. 090200 +------------------------+ - | Kernel boot sector | The kernel legacy boot sector. + | Kernel boot sector | The kernel legacy boot sector. 090000 +------------------------+ - | Protected-mode kernel | The bulk of the kernel image. + | Protected-mode kernel | The bulk of the kernel image. 010000 +------------------------+ - | Boot loader | <- Boot sector entry point 0000:7C00 + | Boot loader | <- Boot sector entry point 0000:7C00 001000 +------------------------+ - | Reserved for MBR/BIOS | + | Reserved for MBR/BIOS | 000800 +------------------------+ - | Typically used by MBR | + | Typically used by MBR | 000600 +------------------------+ - | BIOS use only | + | BIOS use only | 000000 +------------------------+ When using bzImage, the protected-mode kernel was relocated to @@ -142,27 +142,27 @@ above the 0x9A000 point; too many BIOSes will break above that point. For a modern bzImage kernel with boot protocol version >= 2.02, a memory layout like the following is suggested:: - ~ ~ - | Protected-mode kernel | + ~ ~ + | Protected-mode kernel | 100000 +------------------------+ - | I/O memory hole | + | I/O memory hole | 0A0000 +------------------------+ - | Reserved for BIOS | Leave as much as possible unused - ~ ~ - | Command line | (Can also be below the X+10000 mark) + | Reserved for BIOS | Leave as much as possible unused + ~ ~ + | Command line | (Can also be below the X+10000 mark) X+10000 +------------------------+ - | Stack/heap | For use by the kernel real-mode code. + | Stack/heap | For use by the kernel real-mode code. X+08000 +------------------------+ - | Kernel setup | The kernel real-mode code. - | Kernel boot sector | The kernel legacy boot sector. + | Kernel setup | The kernel real-mode code. + | Kernel boot sector | The kernel legacy boot sector. X +------------------------+ - | Boot loader | <- Boot sector entry point 0000:7C00 + | Boot loader | <- Boot sector entry point 0000:7C00 001000 +------------------------+ - | Reserved for MBR/BIOS | + | Reserved for MBR/BIOS | 000800 +------------------------+ - | Typically used by MBR | + | Typically used by MBR | 000600 +------------------------+ - | BIOS use only | + | BIOS use only | 000000 +------------------------+ ... where the address X is as low as the design of the boot loader permits. @@ -416,7 +416,7 @@ Offset/size: 0x210/1 Protocol: 2.00+ ============ ================== - If your boot loader has an assigned id (see table below), enter + If your boot loader has an assigned ID (see table below), enter 0xTV here, where T is an identifier for the boot loader and V is a version number. Otherwise, enter 0xFF here. @@ -431,32 +431,32 @@ Protocol: 2.00+ ext_loader_type <- 0x05 ext_loader_ver <- 0x23 - Assigned boot loader ids (hexadecimal): - - == ======================================= - 0 LILO - (0x00 reserved for pre-2.00 bootloader) - 1 Loadlin - 2 bootsect-loader - (0x20, all other values reserved) - 3 Syslinux - 4 Etherboot/gPXE/iPXE - 5 ELILO - 7 GRUB - 8 U-Boot - 9 Xen - A Gujin - B Qemu - C Arcturus Networks uCbootloader - D kexec-tools - E Extended (see ext_loader_type) - F Special (0xFF = undefined) - 10 Reserved - 11 Minimal Linux Bootloader - - 12 OVMF UEFI virtualization stack - 13 barebox - == ======================================= + Assigned boot loader IDs: + + ==== ======================================= + 0x0 LILO + (0x00 reserved for pre-2.00 bootloader) + 0x1 Loadlin + 0x2 bootsect-loader + (0x20, all other values reserved) + 0x3 Syslinux + 0x4 Etherboot/gPXE/iPXE + 0x5 ELILO + 0x7 GRUB + 0x8 U-Boot + 0x9 Xen + 0xA Gujin + 0xB Qemu + 0xC Arcturus Networks uCbootloader + 0xD kexec-tools + 0xE Extended (see ext_loader_type) + 0xF Special (0xFF = undefined) + 0x10 Reserved + 0x11 Minimal Linux Bootloader + + 0x12 OVMF UEFI virtualization stack + 0x13 barebox + ==== ======================================= Please contact if you need a bootloader ID value assigned. @@ -809,12 +809,12 @@ Protocol: 2.09+ as follow:: struct setup_data { - __u64 next; - __u32 type; - __u32 len; - __u8 data[]; + __u64 next; + __u32 type; + __u32 len; + __u8 data[]; } - + Where, the next is a 64-bit physical pointer to the next node of linked list, the next field of the last node is 0; the type is used to identify the contents of data; the len is the length of data @@ -835,10 +835,10 @@ Protocol: 2.09+ protocol 2.15:: struct setup_indirect { - __u32 type; - __u32 reserved; /* Reserved, must be set to zero. */ - __u64 len; - __u64 addr; + __u32 type; + __u32 reserved; /* Reserved, must be set to zero. */ + __u64 len; + __u64 addr; }; The type member is a SETUP_INDIRECT | SETUP_* type. However, it cannot be @@ -850,15 +850,15 @@ Protocol: 2.09+ In this case setup_data and setup_indirect will look like this:: struct setup_data { - .next = 0, /* or */ - .type = SETUP_INDIRECT, - .len = sizeof(setup_indirect), - .data[sizeof(setup_indirect)] = (struct setup_indirect) { - .type = SETUP_INDIRECT | SETUP_E820_EXT, - .reserved = 0, - .len = , - .addr = , - }, + .next = 0, /* or */ + .type = SETUP_INDIRECT, + .len = sizeof(setup_indirect), + .data[sizeof(setup_indirect)] = (struct setup_indirect) { + .type = SETUP_INDIRECT | SETUP_E820_EXT, + .reserved = 0, + .len = , + .addr = , + }, } .. note:: @@ -897,11 +897,11 @@ Offset/size: 0x260/4 The kernel runtime start address is determined by the following algorithm:: if (relocatable_kernel) { - if (load_address < pref_address) - load_address = pref_address; - runtime_start = align_up(load_address, kernel_alignment); + if (load_address < pref_address) + load_address = pref_address; + runtime_start = align_up(load_address, kernel_alignment); } else { - runtime_start = pref_address; + runtime_start = pref_address; } Hence the necessary memory window location and size can be estimated by @@ -975,22 +975,22 @@ after kernel_info_var_len_data label. Each chunk of variable size data has to be prefixed with header/magic and its size, e.g.:: kernel_info: - .ascii "LToP" /* Header, Linux top (structure). */ - .long kernel_info_var_len_data - kernel_info - .long kernel_info_end - kernel_info - .long 0x01234567 /* Some fixed size data for the bootloaders. */ + .ascii "LToP" /* Header, Linux top (structure). */ + .long kernel_info_var_len_data - kernel_info + .long kernel_info_end - kernel_info + .long 0x01234567 /* Some fixed size data for the bootloaders. */ kernel_info_var_len_data: example_struct: /* Some variable size data for the bootloaders. */ - .ascii "0123" /* Header/Magic. */ - .long example_struct_end - example_struct - .ascii "Struct" - .long 0x89012345 + .ascii "0123" /* Header/Magic. */ + .long example_struct_end - example_struct + .ascii "Struct" + .long 0x89012345 example_struct_end: example_strings: /* Some variable size data for the bootloaders. */ - .ascii "ABCD" /* Header/Magic. */ - .long example_strings_end - example_strings - .asciz "String_0" - .asciz "String_1" + .ascii "ABCD" /* Header/Magic. */ + .long example_strings_end - example_strings + .asciz "String_0" + .asciz "String_1" example_strings_end: kernel_info_end: @@ -1132,53 +1132,53 @@ Such a boot loader should enter the following fields in the header:: unsigned long base_ptr; /* base address for real-mode segment */ if (setup_sects == 0) - setup_sects = 4; + setup_sects = 4; if (protocol >= 0x0200) { - type_of_loader = ; - if (loading_initrd) { - ramdisk_image = ; - ramdisk_size = ; - } - - if (protocol >= 0x0202 && loadflags & 0x01) - heap_end = 0xe000; - else - heap_end = 0x9800; - - if (protocol >= 0x0201) { - heap_end_ptr = heap_end - 0x200; - loadflags |= 0x80; /* CAN_USE_HEAP */ - } - - if (protocol >= 0x0202) { - cmd_line_ptr = base_ptr + heap_end; - strcpy(cmd_line_ptr, cmdline); - } else { - cmd_line_magic = 0xA33F; - cmd_line_offset = heap_end; - setup_move_size = heap_end + strlen(cmdline) + 1; - strcpy(base_ptr + cmd_line_offset, cmdline); - } + type_of_loader = ; + if (loading_initrd) { + ramdisk_image = ; + ramdisk_size = ; + } + + if (protocol >= 0x0202 && loadflags & 0x01) + heap_end = 0xe000; + else + heap_end = 0x9800; + + if (protocol >= 0x0201) { + heap_end_ptr = heap_end - 0x200; + loadflags |= 0x80; /* CAN_USE_HEAP */ + } + + if (protocol >= 0x0202) { + cmd_line_ptr = base_ptr + heap_end; + strcpy(cmd_line_ptr, cmdline); + } else { + cmd_line_magic = 0xA33F; + cmd_line_offset = heap_end; + setup_move_size = heap_end + strlen(cmdline) + 1; + strcpy(base_ptr + cmd_line_offset, cmdline); + } } else { - /* Very old kernel */ + /* Very old kernel */ - heap_end = 0x9800; + heap_end = 0x9800; - cmd_line_magic = 0xA33F; - cmd_line_offset = heap_end; + cmd_line_magic = 0xA33F; + cmd_line_offset = heap_end; - /* A very old kernel MUST have its real-mode code loaded at 0x90000 */ - if (base_ptr != 0x90000) { - /* Copy the real-mode kernel */ - memcpy(0x90000, base_ptr, (setup_sects + 1) * 512); - base_ptr = 0x90000; /* Relocated */ - } + /* A very old kernel MUST have its real-mode code loaded at 0x90000 */ + if (base_ptr != 0x90000) { + /* Copy the real-mode kernel */ + memcpy(0x90000, base_ptr, (setup_sects + 1) * 512); + base_ptr = 0x90000; /* Relocated */ + } - strcpy(0x90000 + cmd_line_offset, cmdline); + strcpy(0x90000 + cmd_line_offset, cmdline); - /* It is recommended to clear memory up to the 32K mark */ - memset(0x90000 + (setup_sects + 1) * 512, 0, (64 - (setup_sects + 1)) * 512); + /* It is recommended to clear memory up to the 32K mark */ + memset(0x90000 + (setup_sects + 1) * 512, 0, (64 - (setup_sects + 1)) * 512); } @@ -1431,12 +1431,34 @@ The boot loader *must* fill out the following fields in bp:: All other fields should be zero. .. note:: - The EFI Handover Protocol is deprecated in favour of the ordinary PE/COFF - entry point, combined with the LINUX_EFI_INITRD_MEDIA_GUID based initrd - loading protocol (refer to [0] for an example of the bootloader side of - this), which removes the need for any knowledge on the part of the EFI - bootloader regarding the internal representation of boot_params or any - requirements/limitations regarding the placement of the command line - and ramdisk in memory, or the placement of the kernel image itself. - -[0] https://github.com/u-boot/u-boot/commit/ec80b4735a593961fe701cc3a5d717d4739b0fd0 + The EFI Handover Protocol is deprecated in favour of the ordinary PE/COFF + entry point described below. + +.. _pe-coff-entry-point: + +PE/COFF entry point +=================== + +When compiled with ``CONFIG_EFI_STUB=y``, the kernel can be executed as a +regular PE/COFF binary. See Documentation/admin-guide/efi-stub.rst for +implementation details. + +The stub loader can request the initrd via a UEFI protocol. For this to work, +the firmware or bootloader needs to register a handle which carries +implementations of the ``EFI_LOAD_FILE2`` protocol and the device path +protocol exposing the ``LINUX_EFI_INITRD_MEDIA_GUID`` vendor media device path. +In this case, a kernel booting via the EFI stub will invoke +``LoadFile2::LoadFile()`` method on the registered protocol to instruct the +firmware to load the initrd into a memory location chosen by the kernel/EFI +stub. + +This approach removes the need for any knowledge on the part of the EFI +bootloader regarding the internal representation of boot_params or any +requirements/limitations regarding the placement of the command line and +ramdisk in memory, or the placement of the kernel image itself. + +For sample implementations, refer to `the original u-boot implementation`_ or +`the OVMF implementation`_. + +.. _the original u-boot implementation: https://github.com/u-boot/u-boot/commit/ec80b4735a593961fe701cc3a5d717d4739b0fd0 +.. _the OVMF implementation: https://github.com/tianocore/edk2/blob/1780373897f12c25075f8883e073144506441168/OvmfPkg/LinuxInitrdDynamicShellCommand/LinuxInitrdDynamicShellCommand.c diff --git a/Documentation/arch/x86/topology.rst b/Documentation/arch/x86/topology.rst index 86bec8ac2c4de7..f779a68875c549 100644 --- a/Documentation/arch/x86/topology.rst +++ b/Documentation/arch/x86/topology.rst @@ -17,7 +17,7 @@ with the generic one and look at this one in parallel for the x86 specifics. Needless to say, code should use the generic functions - this file is *only* here to *document* the inner workings of x86 topology. -Started by Thomas Gleixner and Borislav Petkov . +Started by Thomas Gleixner and Borislav Petkov . The main aim of the topology facilities is to present adequate interfaces to code which needs to know/query/use the structure of the running system wrt diff --git a/Documentation/bpf/libbpf/program_types.rst b/Documentation/bpf/libbpf/program_types.rst index 218b020a2f81ff..3b837522834bf9 100644 --- a/Documentation/bpf/libbpf/program_types.rst +++ b/Documentation/bpf/libbpf/program_types.rst @@ -100,10 +100,26 @@ described in more detail in the footnotes. | | | ``uretprobe.s+`` [#uprobe]_ | Yes | + + +----------------------------------+-----------+ | | | ``usdt+`` [#usdt]_ | | ++ + +----------------------------------+-----------+ +| | | ``usdt.s+`` [#usdt]_ | Yes | + +----------------------------------------+----------------------------------+-----------+ | | ``BPF_TRACE_KPROBE_MULTI`` | ``kprobe.multi+`` [#kpmulti]_ | | + + +----------------------------------+-----------+ | | | ``kretprobe.multi+`` [#kpmulti]_ | | ++ +----------------------------------------+----------------------------------+-----------+ +| | ``BPF_TRACE_KPROBE_SESSION`` | ``kprobe.session+`` [#kpmulti]_ | | ++ +----------------------------------------+----------------------------------+-----------+ +| | ``BPF_TRACE_UPROBE_MULTI`` | ``uprobe.multi+`` [#upmul]_ | | ++ + +----------------------------------+-----------+ +| | | ``uprobe.multi.s+`` [#upmul]_ | Yes | ++ + +----------------------------------+-----------+ +| | | ``uretprobe.multi+`` [#upmul]_ | | ++ + +----------------------------------+-----------+ +| | | ``uretprobe.multi.s+`` [#upmul]_ | Yes | ++ +----------------------------------------+----------------------------------+-----------+ +| | ``BPF_TRACE_UPROBE_SESSION`` | ``uprobe.session+`` [#upmul]_ | | ++ + +----------------------------------+-----------+ +| | | ``uprobe.session.s+`` [#upmul]_ | Yes | +-------------------------------------------+----------------------------------------+----------------------------------+-----------+ | ``BPF_PROG_TYPE_LIRC_MODE2`` | ``BPF_LIRC_MODE2`` | ``lirc_mode2`` | | +-------------------------------------------+----------------------------------------+----------------------------------+-----------+ @@ -219,6 +235,8 @@ described in more detail in the footnotes. non-negative integer. .. [#ksyscall] The ``ksyscall`` attach format is ``ksyscall/``. .. [#uprobe] The ``uprobe`` attach format is ``uprobe[.s]/:[+]``. +.. [#upmul] The ``uprobe.multi`` attach format is ``uprobe.multi[.s]/:`` + where ``function-pattern`` supports ``*`` and ``?`` wildcards. .. [#usdt] The ``usdt`` attach format is ``usdt/::``. .. [#kpmulti] The ``kprobe.multi`` attach format is ``kprobe.multi/`` where ``pattern`` supports ``*`` and ``?`` wildcards. Valid characters for pattern are diff --git a/Documentation/bpf/map_array.rst b/Documentation/bpf/map_array.rst index f2f51a53e8aed5..fa56ff75190c8f 100644 --- a/Documentation/bpf/map_array.rst +++ b/Documentation/bpf/map_array.rst @@ -15,8 +15,9 @@ of constant size. The size of the array is defined in ``max_entries`` at creation time. All array elements are pre-allocated and zero initialized when created. ``BPF_MAP_TYPE_PERCPU_ARRAY`` uses a different memory region for each CPU whereas ``BPF_MAP_TYPE_ARRAY`` uses the same memory region. The value -stored can be of any size, however, all array elements are aligned to 8 -bytes. +stored can be of any size for ``BPF_MAP_TYPE_ARRAY`` and not more than +``PCPU_MIN_UNIT_SIZE`` (32 kB) for ``BPF_MAP_TYPE_PERCPU_ARRAY``. All +array elements are aligned to 8 bytes. Since kernel 5.5, memory mapping may be enabled for ``BPF_MAP_TYPE_ARRAY`` by setting the flag ``BPF_F_MMAPABLE``. The map definition is page-aligned and diff --git a/Documentation/conf.py b/Documentation/conf.py index 574896cca1983e..1ea2ae5c6276ce 100644 --- a/Documentation/conf.py +++ b/Documentation/conf.py @@ -18,8 +18,6 @@ import sphinx # documentation root, use os.path.abspath to make it absolute, like shown here. sys.path.insert(0, os.path.abspath("sphinx")) -from load_config import loadConfig # pylint: disable=C0413,E0401 - # Minimal supported version needs_sphinx = "3.4.3" @@ -93,8 +91,12 @@ def config_init(app, config): # LaTeX and PDF output require a list of documents with are dependent # of the app.srcdir. Add them here - # When SPHINXDIRS is used, we just need to get index.rst, if it exists + # Handle the case where SPHINXDIRS is used if not os.path.samefile(doctree, app.srcdir): + # Add a tag to mark that the build is actually a subproject + tags.add("subproject") + + # get index.rst, if it exists doc = os.path.basename(app.srcdir) fname = "index" if os.path.exists(os.path.join(app.srcdir, fname + ".rst")): @@ -583,13 +585,6 @@ pdf_documents = [ kerneldoc_bin = "../scripts/kernel-doc.py" kerneldoc_srctree = ".." -# ------------------------------------------------------------------------------ -# Since loadConfig overwrites settings from the global namespace, it has to be -# the last statement in the conf.py file -# ------------------------------------------------------------------------------ -loadConfig(globals()) - - def setup(app): """Patterns need to be updated at init time on older Sphinx versions""" diff --git a/Documentation/core-api/assoc_array.rst b/Documentation/core-api/assoc_array.rst index 792bbf9939e133..19d89f92bf8da8 100644 --- a/Documentation/core-api/assoc_array.rst +++ b/Documentation/core-api/assoc_array.rst @@ -92,18 +92,18 @@ There are two functions for dealing with the script: void assoc_array_apply_edit(struct assoc_array_edit *edit); -This will perform the edit functions, interpolating various write barriers -to permit accesses under the RCU read lock to continue. The edit script -will then be passed to ``call_rcu()`` to free it and any dead stuff it points -to. + This will perform the edit functions, interpolating various write barriers + to permit accesses under the RCU read lock to continue. The edit script + will then be passed to ``call_rcu()`` to free it and any dead stuff it + points to. 2. Cancel an edit script:: void assoc_array_cancel_edit(struct assoc_array_edit *edit); -This frees the edit script and all preallocated memory immediately. If -this was for insertion, the new object is _not_ released by this function, -but must rather be released by the caller. + This frees the edit script and all preallocated memory immediately. If + this was for insertion, the new object is *not* released by this function, + but must rather be released by the caller. These functions are guaranteed not to fail. @@ -123,43 +123,43 @@ This points to a number of methods, all of which need to be provided: unsigned long (*get_key_chunk)(const void *index_key, int level); -This should return a chunk of caller-supplied index key starting at the -*bit* position given by the level argument. The level argument will be a -multiple of ``ASSOC_ARRAY_KEY_CHUNK_SIZE`` and the function should return -``ASSOC_ARRAY_KEY_CHUNK_SIZE bits``. No error is possible. + This should return a chunk of caller-supplied index key starting at the + *bit* position given by the level argument. The level argument will be a + multiple of ``ASSOC_ARRAY_KEY_CHUNK_SIZE`` and the function should return + ``ASSOC_ARRAY_KEY_CHUNK_SIZE bits``. No error is possible. 2. Get a chunk of an object's index key:: unsigned long (*get_object_key_chunk)(const void *object, int level); -As the previous function, but gets its data from an object in the array -rather than from a caller-supplied index key. + As the previous function, but gets its data from an object in the array + rather than from a caller-supplied index key. 3. See if this is the object we're looking for:: bool (*compare_object)(const void *object, const void *index_key); -Compare the object against an index key and return ``true`` if it matches and -``false`` if it doesn't. + Compare the object against an index key and return ``true`` if it matches + and ``false`` if it doesn't. 4. Diff the index keys of two objects:: int (*diff_objects)(const void *object, const void *index_key); -Return the bit position at which the index key of the specified object -differs from the given index key or -1 if they are the same. + Return the bit position at which the index key of the specified object + differs from the given index key or -1 if they are the same. 5. Free an object:: void (*free_object)(void *object); -Free the specified object. Note that this may be called an RCU grace period -after ``assoc_array_apply_edit()`` was called, so ``synchronize_rcu()`` may be -necessary on module unloading. + Free the specified object. Note that this may be called an RCU grace period + after ``assoc_array_apply_edit()`` was called, so ``synchronize_rcu()`` may + be necessary on module unloading. Manipulation Functions @@ -171,7 +171,7 @@ There are a number of functions for manipulating an associative array: void assoc_array_init(struct assoc_array *array); -This initialises the base structure for an associative array. It can't fail. + This initialises the base structure for an associative array. It can't fail. 2. Insert/replace an object in an associative array:: @@ -182,21 +182,21 @@ This initialises the base structure for an associative array. It can't fail. const void *index_key, void *object); -This inserts the given object into the array. Note that the least -significant bit of the pointer must be zero as it's used to type-mark -pointers internally. + This inserts the given object into the array. Note that the least + significant bit of the pointer must be zero as it's used to type-mark + pointers internally. -If an object already exists for that key then it will be replaced with the -new object and the old one will be freed automatically. + If an object already exists for that key then it will be replaced with the + new object and the old one will be freed automatically. -The ``index_key`` argument should hold index key information and is -passed to the methods in the ops table when they are called. + The ``index_key`` argument should hold index key information and is + passed to the methods in the ops table when they are called. -This function makes no alteration to the array itself, but rather returns -an edit script that must be applied. ``-ENOMEM`` is returned in the case of -an out-of-memory error. + This function makes no alteration to the array itself, but rather returns + an edit script that must be applied. ``-ENOMEM`` is returned in the case of + an out-of-memory error. -The caller should lock exclusively against other modifiers of the array. + The caller should lock exclusively against other modifiers of the array. 3. Delete an object from an associative array:: @@ -206,15 +206,15 @@ The caller should lock exclusively against other modifiers of the array. const struct assoc_array_ops *ops, const void *index_key); -This deletes an object that matches the specified data from the array. + This deletes an object that matches the specified data from the array. -The ``index_key`` argument should hold index key information and is -passed to the methods in the ops table when they are called. + The ``index_key`` argument should hold index key information and is + passed to the methods in the ops table when they are called. -This function makes no alteration to the array itself, but rather returns -an edit script that must be applied. ``-ENOMEM`` is returned in the case of -an out-of-memory error. ``NULL`` will be returned if the specified object is -not found within the array. + This function makes no alteration to the array itself, but rather returns + an edit script that must be applied. ``-ENOMEM`` is returned in the case of + an out-of-memory error. ``NULL`` will be returned if the specified object + is not found within the array. The caller should lock exclusively against other modifiers of the array. @@ -225,14 +225,14 @@ The caller should lock exclusively against other modifiers of the array. assoc_array_clear(struct assoc_array *array, const struct assoc_array_ops *ops); -This deletes all the objects from an associative array and leaves it -completely empty. + This deletes all the objects from an associative array and leaves it + completely empty. -This function makes no alteration to the array itself, but rather returns -an edit script that must be applied. ``-ENOMEM`` is returned in the case of -an out-of-memory error. + This function makes no alteration to the array itself, but rather returns + an edit script that must be applied. ``-ENOMEM`` is returned in the case of + an out-of-memory error. -The caller should lock exclusively against other modifiers of the array. + The caller should lock exclusively against other modifiers of the array. 5. Destroy an associative array, deleting all objects:: @@ -240,14 +240,14 @@ The caller should lock exclusively against other modifiers of the array. void assoc_array_destroy(struct assoc_array *array, const struct assoc_array_ops *ops); -This destroys the contents of the associative array and leaves it -completely empty. It is not permitted for another thread to be traversing -the array under the RCU read lock at the same time as this function is -destroying it as no RCU deferral is performed on memory release - -something that would require memory to be allocated. + This destroys the contents of the associative array and leaves it + completely empty. It is not permitted for another thread to be traversing + the array under the RCU read lock at the same time as this function is + destroying it as no RCU deferral is performed on memory release - + something that would require memory to be allocated. -The caller should lock exclusively against other modifiers and accessors -of the array. + The caller should lock exclusively against other modifiers and accessors + of the array. 6. Garbage collect an associative array:: @@ -257,24 +257,24 @@ of the array. bool (*iterator)(void *object, void *iterator_data), void *iterator_data); -This iterates over the objects in an associative array and passes each one to -``iterator()``. If ``iterator()`` returns ``true``, the object is kept. If it -returns ``false``, the object will be freed. If the ``iterator()`` function -returns ``true``, it must perform any appropriate refcount incrementing on the -object before returning. + This iterates over the objects in an associative array and passes each one + to ``iterator()``. If ``iterator()`` returns ``true``, the object is kept. + If it returns ``false``, the object will be freed. If the ``iterator()`` + function returns ``true``, it must perform any appropriate refcount + incrementing on the object before returning. -The internal tree will be packed down if possible as part of the iteration -to reduce the number of nodes in it. + The internal tree will be packed down if possible as part of the iteration + to reduce the number of nodes in it. -The ``iterator_data`` is passed directly to ``iterator()`` and is otherwise -ignored by the function. + The ``iterator_data`` is passed directly to ``iterator()`` and is otherwise + ignored by the function. -The function will return ``0`` if successful and ``-ENOMEM`` if there wasn't -enough memory. + The function will return ``0`` if successful and ``-ENOMEM`` if there wasn't + enough memory. -It is possible for other threads to iterate over or search the array under -the RCU read lock while this function is in progress. The caller should -lock exclusively against other modifiers of the array. + It is possible for other threads to iterate over or search the array under + the RCU read lock while this function is in progress. The caller should + lock exclusively against other modifiers of the array. Access Functions @@ -289,19 +289,19 @@ There are two functions for accessing an associative array: void *iterator_data), void *iterator_data); -This passes each object in the array to the iterator callback function. -``iterator_data`` is private data for that function. + This passes each object in the array to the iterator callback function. + ``iterator_data`` is private data for that function. -This may be used on an array at the same time as the array is being -modified, provided the RCU read lock is held. Under such circumstances, -it is possible for the iteration function to see some objects twice. If -this is a problem, then modification should be locked against. The -iteration algorithm should not, however, miss any objects. + This may be used on an array at the same time as the array is being + modified, provided the RCU read lock is held. Under such circumstances, + it is possible for the iteration function to see some objects twice. If + this is a problem, then modification should be locked against. The + iteration algorithm should not, however, miss any objects. -The function will return ``0`` if no objects were in the array or else it will -return the result of the last iterator function called. Iteration stops -immediately if any call to the iteration function results in a non-zero -return. + The function will return ``0`` if no objects were in the array or else it + will return the result of the last iterator function called. Iteration + stops immediately if any call to the iteration function results in a + non-zero return. 2. Find an object in an associative array:: @@ -310,14 +310,14 @@ return. const struct assoc_array_ops *ops, const void *index_key); -This walks through the array's internal tree directly to the object -specified by the index key.. + This walks through the array's internal tree directly to the object + specified by the index key. -This may be used on an array at the same time as the array is being -modified, provided the RCU read lock is held. + This may be used on an array at the same time as the array is being + modified, provided the RCU read lock is held. -The function will return the object if found (and set ``*_type`` to the object -type) or will return ``NULL`` if the object was not found. + The function will return the object if found (and set ``*_type`` to the + object type) or will return ``NULL`` if the object was not found. Index Key Form @@ -399,10 +399,11 @@ fixed levels. For example:: In the above example, there are 7 nodes (A-G), each with 16 slots (0-f). Assuming no other meta data nodes in the tree, the key space is divided -thusly:: +thusly: + =========== ==== KEY PREFIX NODE - ========== ==== + =========== ==== 137* D 138* E 13[0-69-f]* C @@ -410,10 +411,12 @@ thusly:: e6* G e[0-57-f]* F [02-df]* A + =========== ==== So, for instance, keys with the following example index keys will be found in -the appropriate nodes:: +the appropriate nodes: + =============== ======= ==== INDEX KEY PREFIX NODE =============== ======= ==== 13694892892489 13 C @@ -422,12 +425,13 @@ the appropriate nodes:: 138bbb89003093 138 E 1394879524789 12 C 1458952489 1 B - 9431809de993ba - A - b4542910809cd - A + 9431809de993ba \- A + b4542910809cd \- A e5284310def98 e F e68428974237 e6 G e7fffcbd443 e F - f3842239082 - A + f3842239082 \- A + =============== ======= ==== To save memory, if a node can hold all the leaves in its portion of keyspace, then the node will have all those leaves in it and will not have any metadata @@ -441,8 +445,9 @@ metadata pointer. If the metadata pointer is there, any leaf whose key matches the metadata key prefix must be in the subtree that the metadata pointer points to. -In the above example list of index keys, node A will contain:: +In the above example list of index keys, node A will contain: + ==== =============== ================== SLOT CONTENT INDEX KEY (PREFIX) ==== =============== ================== 1 PTR TO NODE B 1* @@ -450,11 +455,16 @@ In the above example list of index keys, node A will contain:: any LEAF b4542910809cd e PTR TO NODE F e* any LEAF f3842239082 + ==== =============== ================== -and node B:: +and node B: - 3 PTR TO NODE C 13* - any LEAF 1458952489 + ==== =============== ================== + SLOT CONTENT INDEX KEY (PREFIX) + ==== =============== ================== + 3 PTR TO NODE C 13* + any LEAF 1458952489 + ==== =============== ================== Shortcuts diff --git a/Documentation/core-api/cpu_hotplug.rst b/Documentation/core-api/cpu_hotplug.rst index e1b0eeabbb5e58..9b4afca9fd09c0 100644 --- a/Documentation/core-api/cpu_hotplug.rst +++ b/Documentation/core-api/cpu_hotplug.rst @@ -8,7 +8,7 @@ CPU hotplug in the Kernel Srivatsa Vaddagiri , Ashok Raj , Joel Schopp , - Thomas Gleixner + Thomas Gleixner Introduction ============ diff --git a/Documentation/core-api/genericirq.rst b/Documentation/core-api/genericirq.rst index 582bde9bf5a92b..b16d751d4b98fd 100644 --- a/Documentation/core-api/genericirq.rst +++ b/Documentation/core-api/genericirq.rst @@ -439,6 +439,6 @@ Credits The following people have contributed to this document: -1. Thomas Gleixner tglx@linutronix.de +1. Thomas Gleixner tglx@kernel.org 2. Ingo Molnar mingo@elte.hu diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst index 6cbdcbfa79c30b..5eb0fbbbc323c3 100644 --- a/Documentation/core-api/index.rst +++ b/Documentation/core-api/index.rst @@ -138,6 +138,7 @@ Documents that don't fit elsewhere or which have yet to be categorized. :maxdepth: 1 librs + liveupdate netlink .. only:: subproject and html diff --git a/Documentation/core-api/kho/concepts.rst b/Documentation/core-api/kho/concepts.rst index 36d5c05cfb307e..d626d1dbd67847 100644 --- a/Documentation/core-api/kho/concepts.rst +++ b/Documentation/core-api/kho/concepts.rst @@ -70,5 +70,5 @@ in the FDT. That state is called the KHO finalization phase. Public API ========== -.. kernel-doc:: kernel/kexec_handover.c +.. kernel-doc:: kernel/liveupdate/kexec_handover.c :export: diff --git a/Documentation/core-api/librs.rst b/Documentation/core-api/librs.rst index 6010f5bc5bf91d..0d88893dbc03c0 100644 --- a/Documentation/core-api/librs.rst +++ b/Documentation/core-api/librs.rst @@ -209,4 +209,4 @@ testing. Thanks a lot. The following people have contributed to this document: -Thomas Gleixner\ tglx@linutronix.de +Thomas Gleixner\ tglx@kernel.org diff --git a/Documentation/core-api/liveupdate.rst b/Documentation/core-api/liveupdate.rst new file mode 100644 index 00000000000000..7960eb15a81f37 --- /dev/null +++ b/Documentation/core-api/liveupdate.rst @@ -0,0 +1,61 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================== +Live Update Orchestrator +======================== +:Author: Pasha Tatashin + +.. kernel-doc:: kernel/liveupdate/luo_core.c + :doc: Live Update Orchestrator (LUO) + +LUO Sessions +============ +.. kernel-doc:: kernel/liveupdate/luo_session.c + :doc: LUO Sessions + +LUO Preserving File Descriptors +=============================== +.. kernel-doc:: kernel/liveupdate/luo_file.c + :doc: LUO File Descriptors + +Live Update Orchestrator ABI +============================ +.. kernel-doc:: include/linux/kho/abi/luo.h + :doc: Live Update Orchestrator ABI + +The following types of file descriptors can be preserved + +.. toctree:: + :maxdepth: 1 + + ../mm/memfd_preservation + +Public API +========== +.. kernel-doc:: include/linux/liveupdate.h + +.. kernel-doc:: include/linux/kho/abi/luo.h + :functions: + +.. kernel-doc:: kernel/liveupdate/luo_core.c + :export: + +.. kernel-doc:: kernel/liveupdate/luo_file.c + :export: + +Internal API +============ +.. kernel-doc:: kernel/liveupdate/luo_core.c + :internal: + +.. kernel-doc:: kernel/liveupdate/luo_session.c + :internal: + +.. kernel-doc:: kernel/liveupdate/luo_file.c + :internal: + +See Also +======== + +- :doc:`Live Update uAPI ` +- :doc:`/core-api/kho/concepts` diff --git a/Documentation/core-api/printk-formats.rst b/Documentation/core-api/printk-formats.rst index 7f2f11b4828651..c0b1b6089307a3 100644 --- a/Documentation/core-api/printk-formats.rst +++ b/Documentation/core-api/printk-formats.rst @@ -547,11 +547,13 @@ Time and date %pt[RT]s YYYY-mm-dd HH:MM:SS %pt[RT]d YYYY-mm-dd %pt[RT]t HH:MM:SS - %pt[RT][dt][r][s] + %ptSp . + %pt[RST][dt][r][s] For printing date and time as represented by:: - R struct rtc_time structure + R content of struct rtc_time + S content of struct timespec64 T time64_t type in human readable format. @@ -563,6 +565,11 @@ The %pt[RT]s (space) will override ISO 8601 separator by using ' ' (space) instead of 'T' (Capital T) between date and time. It won't have any effect when date or time is omitted. +The %ptSp is equivalent to %lld.%09ld for the content of the struct timespec64. +When the other specifiers are given, it becomes the respective equivalent of +%ptT[dt][r][s].%09ld. In other words, the seconds are being printed in +the human readable format followed by a dot and nanoseconds. + Passed by reference. struct clk diff --git a/Documentation/crypto/index.rst b/Documentation/crypto/index.rst index 100b47d049c04e..4ee667c446f991 100644 --- a/Documentation/crypto/index.rst +++ b/Documentation/crypto/index.rst @@ -27,3 +27,4 @@ for cryptographic use cases, as well as programming examples. descore-readme device_drivers/index krb5 + sha3 diff --git a/Documentation/crypto/sha3.rst b/Documentation/crypto/sha3.rst new file mode 100644 index 00000000000000..37640f295118b2 --- /dev/null +++ b/Documentation/crypto/sha3.rst @@ -0,0 +1,130 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +========================== +SHA-3 Algorithm Collection +========================== + +.. contents:: + +Overview +======== + +The SHA-3 family of algorithms, as specified in NIST FIPS-202 [1]_, contains six +algorithms based on the Keccak sponge function. The differences between them +are: the "rate" (how much of the state buffer gets updated with new data between +invocations of the Keccak function and analogous to the "block size"), what +domain separation suffix gets appended to the input data, and how much output +data is extracted at the end. The Keccak sponge function is designed such that +arbitrary amounts of output can be obtained for certain algorithms. + +Four digest algorithms are provided: + + - SHA3-224 + - SHA3-256 + - SHA3-384 + - SHA3-512 + +Additionally, two Extendable-Output Functions (XOFs) are provided: + + - SHAKE128 + - SHAKE256 + +The SHA-3 library API supports all six of these algorithms. The four digest +algorithms are also supported by the crypto_shash and crypto_ahash APIs. + +This document describes the SHA-3 library API. + + +Digests +======= + +The following functions compute SHA-3 digests:: + + void sha3_224(const u8 *in, size_t in_len, u8 out[SHA3_224_DIGEST_SIZE]); + void sha3_256(const u8 *in, size_t in_len, u8 out[SHA3_256_DIGEST_SIZE]); + void sha3_384(const u8 *in, size_t in_len, u8 out[SHA3_384_DIGEST_SIZE]); + void sha3_512(const u8 *in, size_t in_len, u8 out[SHA3_512_DIGEST_SIZE]); + +For users that need to pass in data incrementally, an incremental API is also +provided. The incremental API uses the following struct:: + + struct sha3_ctx { ... }; + +Initialization is done with one of:: + + void sha3_224_init(struct sha3_ctx *ctx); + void sha3_256_init(struct sha3_ctx *ctx); + void sha3_384_init(struct sha3_ctx *ctx); + void sha3_512_init(struct sha3_ctx *ctx); + +Input data is then added with any number of calls to:: + + void sha3_update(struct sha3_ctx *ctx, const u8 *in, size_t in_len); + +Finally, the digest is generated using:: + + void sha3_final(struct sha3_ctx *ctx, u8 *out); + +which also zeroizes the context. The length of the digest is determined by the +initialization function that was called. + + +Extendable-Output Functions +=========================== + +The following functions compute the SHA-3 extendable-output functions (XOFs):: + + void shake128(const u8 *in, size_t in_len, u8 *out, size_t out_len); + void shake256(const u8 *in, size_t in_len, u8 *out, size_t out_len); + +For users that need to provide the input data incrementally and/or receive the +output data incrementally, an incremental API is also provided. The incremental +API uses the following struct:: + + struct shake_ctx { ... }; + +Initialization is done with one of:: + + void shake128_init(struct shake_ctx *ctx); + void shake256_init(struct shake_ctx *ctx); + +Input data is then added with any number of calls to:: + + void shake_update(struct shake_ctx *ctx, const u8 *in, size_t in_len); + +Finally, the output data is extracted with any number of calls to:: + + void shake_squeeze(struct shake_ctx *ctx, u8 *out, size_t out_len); + +and telling it how much data should be extracted. Note that performing multiple +squeezes, with the output laid consecutively in a buffer, gets exactly the same +output as doing a single squeeze for the combined amount over the same buffer. + +More input data cannot be added after squeezing has started. + +Once all the desired output has been extracted, zeroize the context:: + + void shake_zeroize_ctx(struct shake_ctx *ctx); + + +Testing +======= + +To test the SHA-3 code, use sha3_kunit (CONFIG_CRYPTO_LIB_SHA3_KUNIT_TEST). + +Since the SHA-3 algorithms are FIPS-approved, when the kernel is booted in FIPS +mode the SHA-3 library also performs a simple self-test. This is purely to meet +a FIPS requirement. Normal testing done by kernel developers and integrators +should use the much more comprehensive KUnit test suite instead. + + +References +========== + +.. [1] https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.202.pdf + + +API Function Reference +====================== + +.. kernel-doc:: include/crypto/sha3.h diff --git a/Documentation/crypto/userspace-if.rst b/Documentation/crypto/userspace-if.rst index f80f243e227e62..8158b363cd98f5 100644 --- a/Documentation/crypto/userspace-if.rst +++ b/Documentation/crypto/userspace-if.rst @@ -302,10 +302,9 @@ follows: Depending on the RNG type, the RNG must be seeded. The seed is provided -using the setsockopt interface to set the key. For example, the -ansi_cprng requires a seed. The DRBGs do not require a seed, but may be -seeded. The seed is also known as a *Personalization String* in NIST SP 800-90A -standard. +using the setsockopt interface to set the key. The SP800-90A DRBGs do +not require a seed, but may be seeded. The seed is also known as a +*Personalization String* in NIST SP 800-90A standard. Using the read()/recvmsg() system calls, random numbers can be obtained. The kernel generates at most 128 bytes in one call. If user space diff --git a/Documentation/dev-tools/checkpatch.rst b/Documentation/dev-tools/checkpatch.rst index d5c47e560324fb..deb3f67a633cfc 100644 --- a/Documentation/dev-tools/checkpatch.rst +++ b/Documentation/dev-tools/checkpatch.rst @@ -461,16 +461,9 @@ Comments line comments is:: /* - * This is the preferred style - * for multi line comments. - */ - - The networking comment style is a bit different, with the first line - not empty like the former:: - - /* This is the preferred comment style - * for files in net/ and drivers/net/ - */ + * This is the preferred style + * for multi line comments. + */ See: https://www.kernel.org/doc/html/latest/process/coding-style.html#commenting @@ -1009,6 +1002,29 @@ Functions and Variables return bar; + **UNINITIALIZED_PTR_WITH_FREE** + Pointers with __free attribute should be declared at the place of use + and initialized (see include/linux/cleanup.h). In this case + declarations at the top of the function rule can be relaxed. Not doing + so may lead to undefined behavior as the memory assigned (garbage, + in case not initialized) to the pointer is freed automatically when + the pointer goes out of scope. + + Also see: https://lore.kernel.org/lkml/58fd478f408a34b578ee8d949c5c4b4da4d4f41d.camel@HansenPartnership.com/ + + Example:: + + type var __free(free_func); + ... // var not used, but, in future someone might add a return here + var = malloc(var_size); + ... + + should be initialized as:: + + ... + type var __free(free_func) = malloc(var_size); + ... + Permissions ----------- @@ -1245,6 +1261,16 @@ Others The patch file does not appear to be in unified-diff format. Please regenerate the patch file before sending it to the maintainer. + **PLACEHOLDER_USE** + Detects unhandled placeholder text left in cover letters or commit headers/logs. + Common placeholders include lines like:: + + *** SUBJECT HERE *** + *** BLURB HERE *** + + These typically come from autogenerated templates. Replace them with a proper + subject and description before sending. + **PRINTF_0XDECIMAL** Prefixing 0x with decimal output is defective and should be corrected. diff --git a/Documentation/dev-tools/kunit/run_manual.rst b/Documentation/dev-tools/kunit/run_manual.rst index 699d9288507508..98e8d5b2880855 100644 --- a/Documentation/dev-tools/kunit/run_manual.rst +++ b/Documentation/dev-tools/kunit/run_manual.rst @@ -35,6 +35,12 @@ or be built into the kernel. a good way of quickly testing everything applicable to the current config. + KUnit can be enabled or disabled at boot time, and this behavior is + controlled by the kunit.enable kernel parameter. + By default, kunit.enable is set to 1 because KUNIT_DEFAULT_ENABLED is + enabled by default. To ensure that tests are executed as expected, + verify that kunit.enable=1 at boot time. + Once we have built our kernel (and/or modules), it is simple to run the tests. If the tests are built-in, they will run automatically on the kernel boot. The results will be written to the kernel log (``dmesg``) diff --git a/Documentation/devicetree/bindings/.yamllint b/Documentation/devicetree/bindings/.yamllint index 53279950180094..8f9dd18dfe0463 100644 --- a/Documentation/devicetree/bindings/.yamllint +++ b/Documentation/devicetree/bindings/.yamllint @@ -30,7 +30,7 @@ rules: document-start: present: true empty-lines: - max: 3 + max: 1 max-end: 1 empty-values: forbid-in-block-mappings: true diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile index 8390d6c00030ac..8d6f85f4455da2 100644 --- a/Documentation/devicetree/bindings/Makefile +++ b/Documentation/devicetree/bindings/Makefile @@ -32,7 +32,8 @@ find_cmd = $(find_all_cmd) | \ sed 's|^$(srctree)/||' | \ grep -F -e "$(subst :," -e ",$(DT_SCHEMA_FILES))" | \ sed 's|^|$(srctree)/|' -CHK_DT_EXAMPLES := $(patsubst $(srctree)/%.yaml,%.example.dtb, $(shell $(find_cmd))) +CHK_DT_EXAMPLES := $(patsubst $(srctree)/%.yaml,%.example.dtb, \ + $(shell $(find_cmd) | xargs grep -l '^examples:')) quiet_cmd_yamllint = LINT $(src) cmd_yamllint = ($(find_cmd) | \ diff --git a/Documentation/devicetree/bindings/arm/altera.yaml b/Documentation/devicetree/bindings/arm/altera.yaml index 30c44a0e640747..db61537b71157a 100644 --- a/Documentation/devicetree/bindings/arm/altera.yaml +++ b/Documentation/devicetree/bindings/arm/altera.yaml @@ -31,7 +31,9 @@ properties: - description: Mercury+ AA1 boards items: - enum: - - enclustra,mercury-pe1 + - enclustra,mercury-aa1-pe1 + - enclustra,mercury-aa1-pe3 + - enclustra,mercury-aa1-st1 - google,chameleon-v3 - const: enclustra,mercury-aa1 - const: altr,socfpga-arria10 @@ -52,6 +54,26 @@ properties: - const: altr,socfpga-cyclone5 - const: altr,socfpga + - description: Mercury SA1 boards + items: + - enum: + - enclustra,mercury-sa1-pe1 + - enclustra,mercury-sa1-pe3 + - enclustra,mercury-sa1-st1 + - const: enclustra,mercury-sa1 + - const: altr,socfpga-cyclone5 + - const: altr,socfpga + + - description: Mercury+ SA2 boards + items: + - enum: + - enclustra,mercury-sa2-pe1 + - enclustra,mercury-sa2-pe3 + - enclustra,mercury-sa2-st1 + - const: enclustra,mercury-sa2 + - const: altr,socfpga-cyclone5 + - const: altr,socfpga + - description: Stratix 10 boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml index a758f4bb2bb312..4683bd1293faf9 100644 --- a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml @@ -27,17 +27,17 @@ properties: additionalProperties: false properties: - "#address-cells": + '#address-cells': const: 1 - "#size-cells": + '#size-cells': const: 0 patternProperties: - "^osc[0-9]$": + '^osc[0-9]$': type: object - "^[a-z0-9,_]+(clk|pll|clk_gate|clk_divided)(@[a-f0-9]+)?$": + '^[a-z0-9,_]+(clk|pll|clk_gate|clk_divided)(@[a-f0-9]+)?$': type: object $ref: '#/$defs/clock-props' unevaluatedProperties: false @@ -58,14 +58,14 @@ properties: minItems: 1 maxItems: 5 - "#address-cells": + '#address-cells': const: 1 - "#size-cells": + '#size-cells': const: 0 patternProperties: - "^[a-z0-9,_]+(clk|pll)(@[a-f0-9]+)?$": + '^[a-z0-9,_]+(clk|pll)(@[a-f0-9]+)?$': type: object $ref: '#/$defs/clock-props' unevaluatedProperties: false @@ -86,11 +86,11 @@ properties: required: - compatible - clocks - - "#clock-cells" + - '#clock-cells' required: - compatible - - "#clock-cells" + - '#clock-cells' required: - compatible @@ -104,7 +104,7 @@ $defs: reg: maxItems: 1 - "#clock-cells": + '#clock-cells': const: 0 clk-gate: diff --git a/Documentation/devicetree/bindings/arm/amd,seattle.yaml b/Documentation/devicetree/bindings/arm/amd,seattle.yaml new file mode 100644 index 00000000000000..7a3fc05b19eb0d --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amd,seattle.yaml @@ -0,0 +1,24 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/amd,seattle.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AMD Seattle SoC Platforms + +maintainers: + - Suravee Suthikulpanit + - Tom Lendacky + +properties: + $nodename: + const: "/" + compatible: + oneOf: + - description: Boards with AMD Seattle SoC + items: + - const: amd,seattle-overdrive + - const: amd,seattle + +additionalProperties: true +... diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index 2a096e060ed3d3..08d9963fe92598 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -134,6 +134,7 @@ properties: - libretech,aml-s912-pc - minix,neo-u9h - nexbox,a1 + - oranth,tx9-pro - tronsmart,vega-s96 - ugoos,am3 - videostrong,gxm-kiii-pro diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml index b4f6695a601528..fa7c403c874a6f 100644 --- a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml @@ -34,6 +34,9 @@ properties: - amlogic,a4-ao-secure - amlogic,c3-ao-secure - amlogic,s4-ao-secure + - amlogic,s6-ao-secure + - amlogic,s7-ao-secure + - amlogic,s7d-ao-secure - amlogic,t7-ao-secure - const: amlogic,meson-gx-ao-secure - const: syscon diff --git a/Documentation/devicetree/bindings/arm/apm.yaml b/Documentation/devicetree/bindings/arm/apm.yaml new file mode 100644 index 00000000000000..ea0d362cea3acd --- /dev/null +++ b/Documentation/devicetree/bindings/arm/apm.yaml @@ -0,0 +1,28 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/apm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: APM X-Gene SoC Platforms + +maintainers: + - Khuong Dinh + +properties: + $nodename: + const: "/" + compatible: + oneOf: + - description: Boards with X-Gene1 Soc + items: + - const: apm,mustang + - const: apm,xgene-storm + + - description: Boards with X-Gene2 SoC + items: + - const: apm,merlin + - const: apm,xgene-shadowcat + +additionalProperties: true +... diff --git a/Documentation/devicetree/bindings/arm/arm,integrator.yaml b/Documentation/devicetree/bindings/arm/arm,integrator.yaml index 1bdbd1b7ee3815..8fe22185a33762 100644 --- a/Documentation/devicetree/bindings/arm/arm,integrator.yaml +++ b/Documentation/devicetree/bindings/arm/arm,integrator.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: ARM Integrator Boards maintainers: - - Linus Walleij + - Linus Walleij description: |+ These were the first ARM platforms officially supported by ARM Ltd. diff --git a/Documentation/devicetree/bindings/arm/arm,realview.yaml b/Documentation/devicetree/bindings/arm/arm,realview.yaml index 3c5f1688dbd787..0b3133ecddac10 100644 --- a/Documentation/devicetree/bindings/arm/arm,realview.yaml +++ b/Documentation/devicetree/bindings/arm/arm,realview.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: ARM RealView Boards maintainers: - - Linus Walleij + - Linus Walleij description: |+ The ARM RealView series of reference designs were built to explore the Arm11, diff --git a/Documentation/devicetree/bindings/arm/arm,scu.yaml b/Documentation/devicetree/bindings/arm/arm,scu.yaml index dae2aa27e641b7..f735b7fb8e1cc2 100644 --- a/Documentation/devicetree/bindings/arm/arm,scu.yaml +++ b/Documentation/devicetree/bindings/arm/arm,scu.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: ARM Snoop Control Unit (SCU) maintainers: - - Linus Walleij + - Linus Walleij description: | As part of the MPCore complex, Cortex-A5 and Cortex-A9 are provided diff --git a/Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml b/Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml index 3b060c36b90cdd..e72dc45c1afa79 100644 --- a/Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml +++ b/Documentation/devicetree/bindings/arm/arm,versatile-sysreg.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Arm Versatile system registers maintainers: - - Linus Walleij + - Linus Walleij description: This is a system control registers block, providing multiple low level diff --git a/Documentation/devicetree/bindings/arm/arm,versatile.yaml b/Documentation/devicetree/bindings/arm/arm,versatile.yaml index 7a3caf6af200a1..c777e455d0388d 100644 --- a/Documentation/devicetree/bindings/arm/arm,versatile.yaml +++ b/Documentation/devicetree/bindings/arm/arm,versatile.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: ARM Versatile Boards maintainers: - - Linus Walleij + - Linus Walleij description: |+ The ARM Versatile boards are two variants of ARM926EJ-S evaluation boards diff --git a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml index 4cdca532054440..6430218ba1ceac 100644 --- a/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml +++ b/Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml @@ -8,7 +8,7 @@ title: ARM Versatile Express and Juno Boards maintainers: - Sudeep Holla - - Linus Walleij + - Linus Walleij description: |+ ARM's Versatile Express platform were built as reference designs for exploring diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml index aedefca7cf4a80..9298c1a75dd13b 100644 --- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml +++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml @@ -93,7 +93,10 @@ properties: - facebook,minerva-cmc - facebook,santabarbara-bmc - facebook,yosemite4-bmc + - facebook,yosemite5-bmc + - ibm,balcones-bmc - ibm,blueridge-bmc + - ibm,bonnell-bmc - ibm,everest-bmc - ibm,fuji-bmc - ibm,rainier-bmc diff --git a/Documentation/devicetree/bindings/arm/bst.yaml b/Documentation/devicetree/bindings/arm/bst.yaml new file mode 100644 index 00000000000000..a3a7f424fd57f2 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bst.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/bst.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BST platforms + +description: + Black Sesame Technologies (BST) is a semiconductor company that produces + automotive-grade system-on-chips (SoCs) for intelligent driving, focusing + on computer vision and AI capabilities. The BST C1200 family includes SoCs + for ADAS (Advanced Driver Assistance Systems) and autonomous driving + applications. + +maintainers: + - Ge Gordon + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: BST C1200 CDCU1.0 ADAS 4C2G board + items: + - const: bst,c1200-cdcu1.0-adas-4c2g + - const: bst,c1200 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 00cdf490b0620b..336669e16d7ab7 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -1105,12 +1105,14 @@ properties: - gateworks,imx8mp-gw74xx # i.MX8MP Gateworks Board - gateworks,imx8mp-gw75xx-2x # i.MX8MP Gateworks Board - gateworks,imx8mp-gw82xx-2x # i.MX8MP Gateworks Board - - gocontroll,moduline-display # GOcontroll Moduline Display controller + - prt,prt8ml # Protonic PRT8ML - skov,imx8mp-skov-basic # SKOV i.MX8MP baseboard without frontplate - skov,imx8mp-skov-revb-hdmi # SKOV i.MX8MP climate control without panel - skov,imx8mp-skov-revb-lt6 # SKOV i.MX8MP climate control with 7” panel - skov,imx8mp-skov-revb-mi1010ait-1cp1 # SKOV i.MX8MP climate control with 10.1" panel + - skov,imx8mp-skov-revc-hdmi # SKOV i.MX8MP climate control without panel - skov,imx8mp-skov-revc-bd500 # SKOV i.MX8MP climate control with LED frontplate + - skov,imx8mp-skov-revc-jutouch-jt101tm023 # SKOV i.MX8MP climate control with 10" JuTouch panel - skov,imx8mp-skov-revc-tian-g07017 # SKOV i.MX8MP climate control with 7" panel - ultratronik,imx8mp-ultra-mach-sbc # Ultratronik SBC i.MX8MP based board - ysoft,imx8mp-iota2-lumpy # Y Soft i.MX8MP IOTA2 Lumpy Board @@ -1161,6 +1163,14 @@ properties: - const: engicam,icore-mx8mp # i.MX8MP Engicam i.Core MX8M Plus SoM - const: fsl,imx8mp + - description: Ka-Ro TX8P-ML81 SoM based boards + items: + - enum: + - gocontroll,moduline-display + - gocontroll,moduline-display-106 + - const: karo,tx8p-ml81 + - const: fsl,imx8mp + - description: Kontron i.MX8MP OSM-S SoM based Boards items: - const: kontron,imx8mp-bl-osm-s # Kontron BL i.MX8MP OSM-S Board @@ -1430,6 +1440,7 @@ properties: - enum: - fsl,imx95-15x15-evk # i.MX95 15x15 EVK Board - fsl,imx95-19x19-evk # i.MX95 19x19 EVK Board + - toradex,verdin-imx95-19x19-evk # i.MX95 Verdin Evaluation Kit (EVK) - const: fsl,imx95 - description: PHYTEC i.MX 95 FPSC based Boards @@ -1439,6 +1450,12 @@ properties: - const: phytec,imx95-phycore-fpsc # phyCORE-i.MX 95 FPSC - const: fsl,imx95 + - description: Toradex Boards with SMARC iMX95 Modules + items: + - const: toradex,smarc-imx95-dev # Toradex SMARC iMX95 on Toradex SMARC Development Board + - const: toradex,smarc-imx95 # Toradex SMARC iMX95 Module + - const: fsl,imx95 + - description: i.MXRT1050 based Boards items: - enum: @@ -1492,6 +1509,13 @@ properties: - const: tq,imx93-tqma9352 # TQ-Systems GmbH i.MX93 TQMa93xxCA/LA SOM - const: fsl,imx93 + - description: PHYTEC phyCORE-i.MX91 SoM based boards + items: + - enum: + - phytec,imx91-phyboard-segin # phyBOARD-Segin with i.MX91 + - const: phytec,imx91-phycore-som # phyCORE-i.MX91 SoM + - const: fsl,imx91 + - description: PHYTEC phyCORE-i.MX93 SoM based boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/gemini.yaml b/Documentation/devicetree/bindings/arm/gemini.yaml index f6a0b675830fbb..fc092962ab5653 100644 --- a/Documentation/devicetree/bindings/arm/gemini.yaml +++ b/Documentation/devicetree/bindings/arm/gemini.yaml @@ -20,7 +20,7 @@ description: | Many of the IP blocks used in the SoC comes from Faraday Technology. maintainers: - - Linus Walleij + - Linus Walleij properties: $nodename: diff --git a/Documentation/devicetree/bindings/arm/intel,socfpga.yaml b/Documentation/devicetree/bindings/arm/intel,socfpga.yaml index c75cd7d29f1aa0..c918837bd41c07 100644 --- a/Documentation/devicetree/bindings/arm/intel,socfpga.yaml +++ b/Documentation/devicetree/bindings/arm/intel,socfpga.yaml @@ -21,10 +21,17 @@ properties: - intel,socfpga-agilex-n6000 - intel,socfpga-agilex-socdk - const: intel,socfpga-agilex + - description: Agilex3 boards + items: + - enum: + - intel,socfpga-agilex3-socdk + - const: intel,socfpga-agilex3 + - const: intel,socfpga-agilex5 - description: Agilex5 boards items: - enum: - intel,socfpga-agilex5-socdk + - intel,socfpga-agilex5-socdk-013b - intel,socfpga-agilex5-socdk-nand - const: intel,socfpga-agilex5 diff --git a/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml b/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml index b7b430896596aa..0f1bf634a98a1a 100644 --- a/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml +++ b/Documentation/devicetree/bindings/arm/intel-ixp4xx.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Intel IXP4xx maintainers: - - Linus Walleij + - Linus Walleij properties: $nodename: diff --git a/Documentation/devicetree/bindings/arm/lge.yaml b/Documentation/devicetree/bindings/arm/lge.yaml new file mode 100644 index 00000000000000..d983ef7fcbd631 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/lge.yaml @@ -0,0 +1,28 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/lge.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LG Electronics SoC Platforms + +maintainers: + - Chanho Min + +properties: + $nodename: + const: "/" + compatible: + oneOf: + - description: Boards with LG1312 Soc + items: + - const: lge,lg1312-ref + - const: lge,lg1312 + + - description: Boards with LG1313 SoC + items: + - const: lge,lg1313-ref + - const: lge,lg1313 + +additionalProperties: true +... diff --git a/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt deleted file mode 100644 index 72de11bd2ef02e..00000000000000 --- a/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt +++ /dev/null @@ -1,146 +0,0 @@ -Marvell Armada AP80x System Controller -====================================== - -The AP806/AP807 is one of the two core HW blocks of the Marvell Armada -7K/8K/931x SoCs. It contains system controllers, which provide several -registers giving access to numerous features: clocks, pin-muxing and -many other SoC configuration items. This DT binding allows to describe -these system controllers. - -For the top level node: - - compatible: must be: "syscon", "simple-mfd"; - - reg: register area of the AP80x system controller - -SYSTEM CONTROLLER 0 -=================== - -Clocks: -------- - - -The Device Tree node representing the AP806/AP807 system controller -provides a number of clocks: - - - 0: reference clock of CPU cluster 0 - - 1: reference clock of CPU cluster 1 - - 2: fixed PLL at 1200 Mhz - - 3: MSS clock, derived from the fixed PLL - -Required properties: - - - compatible: must be one of: - * "marvell,ap806-clock" - * "marvell,ap807-clock" - - #clock-cells: must be set to 1 - -Pinctrl: --------- - -For common binding part and usage, refer to -Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt. - -Required properties: -- compatible must be "marvell,ap806-pinctrl", - -Available mpp pins/groups and functions: -Note: brackets (x) are not part of the mpp name for marvell,function and given -only for more detailed description in this document. - -name pins functions -================================================================================ -mpp0 0 gpio, sdio(clk), spi0(clk) -mpp1 1 gpio, sdio(cmd), spi0(miso) -mpp2 2 gpio, sdio(d0), spi0(mosi) -mpp3 3 gpio, sdio(d1), spi0(cs0n) -mpp4 4 gpio, sdio(d2), i2c0(sda) -mpp5 5 gpio, sdio(d3), i2c0(sdk) -mpp6 6 gpio, sdio(ds) -mpp7 7 gpio, sdio(d4), uart1(rxd) -mpp8 8 gpio, sdio(d5), uart1(txd) -mpp9 9 gpio, sdio(d6), spi0(cs1n) -mpp10 10 gpio, sdio(d7) -mpp11 11 gpio, uart0(txd) -mpp12 12 gpio, sdio(pw_off), sdio(hw_rst) -mpp13 13 gpio -mpp14 14 gpio -mpp15 15 gpio -mpp16 16 gpio -mpp17 17 gpio -mpp18 18 gpio -mpp19 19 gpio, uart0(rxd), sdio(pw_off) - -GPIO: ------ -For common binding part and usage, refer to -Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml. - -Required properties: - -- compatible: "marvell,armada-8k-gpio" - -- offset: offset address inside the syscon block - -Optional properties: - -- marvell,pwm-offset: offset address of PWM duration control registers inside - the syscon block - -Example: -ap_syscon: system-controller@6f4000 { - compatible = "syscon", "simple-mfd"; - reg = <0x6f4000 0x1000>; - - ap_clk: clock { - compatible = "marvell,ap806-clock"; - #clock-cells = <1>; - }; - - ap_pinctrl: pinctrl { - compatible = "marvell,ap806-pinctrl"; - }; - - ap_gpio: gpio { - compatible = "marvell,armada-8k-gpio"; - offset = <0x1040>; - ngpios = <19>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&ap_pinctrl 0 0 19>; - marvell,pwm-offset = <0x10c0>; - #pwm-cells = <2>; - clocks = <&ap_clk 3>; - }; -}; - -SYSTEM CONTROLLER 1 -=================== - -Cluster clocks: ---------------- - -Device Tree Clock bindings for cluster clock of Marvell -AP806/AP807. Each cluster contain up to 2 CPUs running at the same -frequency. - -Required properties: - - compatible: must be one of: - * "marvell,ap806-cpu-clock" - * "marvell,ap807-cpu-clock" -- #clock-cells : should be set to 1. - -- clocks : shall be the input parent clock(s) phandle for the clock - (one per cluster) - -- reg: register range associated with the cluster clocks - -ap_syscon1: system-controller@6f8000 { - compatible = "marvell,armada-ap806-syscon1", "syscon", "simple-mfd"; - reg = <0x6f8000 0x1000>; - - cpu_clk: clock-cpu@278 { - compatible = "marvell,ap806-cpu-clock"; - clocks = <&ap_clk 0>, <&ap_clk 1>; - #clock-cells = <1>; - reg = <0x278 0xa30>; - }; -}; diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt deleted file mode 100644 index 54ff9f21832863..00000000000000 --- a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt +++ /dev/null @@ -1,191 +0,0 @@ -Marvell Armada CP110 System Controller -====================================== - -The CP110 is one of the two core HW blocks of the Marvell Armada 7K/8K -SoCs. It contains system controllers, which provide several registers -giving access to numerous features: clocks, pin-muxing and many other -SoC configuration items. This DT binding allows to describe these -system controllers. - -For the top level node: - - compatible: must be: "syscon", "simple-mfd"; - - reg: register area of the CP110 system controller - -SYSTEM CONTROLLER 0 -=================== - -Clocks: -------- - -The Device Tree node representing this System Controller 0 provides a -number of clocks: - - - a set of core clocks - - a set of gateable clocks - -Those clocks can be referenced by other Device Tree nodes using two -cells: - - The first cell must be 0 or 1. 0 for the core clocks and 1 for the - gateable clocks. - - The second cell identifies the particular core clock or gateable - clocks. - -The following clocks are available: - - Core clocks - - 0 0 APLL - - 0 1 PPv2 core - - 0 2 EIP - - 0 3 Core - - 0 4 NAND core - - 0 5 SDIO core - - Gateable clocks - - 1 0 Audio - - 1 1 Comm Unit - - 1 2 NAND - - 1 3 PPv2 - - 1 4 SDIO - - 1 5 MG Domain - - 1 6 MG Core - - 1 7 XOR1 - - 1 8 XOR0 - - 1 9 GOP DP - - 1 11 PCIe x1 0 - - 1 12 PCIe x1 1 - - 1 13 PCIe x4 - - 1 14 PCIe / XOR - - 1 15 SATA - - 1 16 SATA USB - - 1 17 Main - - 1 18 SD/MMC/GOP - - 1 21 Slow IO (SPI, NOR, BootROM, I2C, UART) - - 1 22 USB3H0 - - 1 23 USB3H1 - - 1 24 USB3 Device - - 1 25 EIP150 - - 1 26 EIP197 - -Required properties: - - - compatible: must be: - "marvell,cp110-clock" - - #clock-cells: must be set to 2 - -Pinctrl: --------- - -For common binding part and usage, refer to the file -Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt. - -Required properties: - -- compatible: "marvell,armada-7k-pinctrl", "marvell,armada-8k-cpm-pinctrl", - "marvell,armada-8k-cps-pinctrl" or "marvell,cp115-standalone-pinctrl" - depending on the specific variant of the SoC being used. - -Available mpp pins/groups and functions: -Note: brackets (x) are not part of the mpp name for marvell,function and given -only for more detailed description in this document. - -name pins functions -================================================================================ -mpp0 0 gpio, dev(ale1), au(i2smclk), ge0(rxd3), tdm(pclk), ptp(pulse), mss_i2c(sda), uart0(rxd), sata0(present_act), ge(mdio) -mpp1 1 gpio, dev(ale0), au(i2sdo_spdifo), ge0(rxd2), tdm(drx), ptp(clk), mss_i2c(sck), uart0(txd), sata1(present_act), ge(mdc) -mpp2 2 gpio, dev(ad15), au(i2sextclk), ge0(rxd1), tdm(dtx), mss_uart(rxd), ptp(pclk_out), i2c1(sck), uart1(rxd), sata0(present_act), xg(mdc) -mpp3 3 gpio, dev(ad14), au(i2slrclk), ge0(rxd0), tdm(fsync), mss_uart(txd), pcie(rstoutn), i2c1(sda), uart1(txd), sata1(present_act), xg(mdio) -mpp4 4 gpio, dev(ad13), au(i2sbclk), ge0(rxctl), tdm(rstn), mss_uart(rxd), uart1(cts), pcie0(clkreq), uart3(rxd), ge(mdc) -mpp5 5 gpio, dev(ad12), au(i2sdi), ge0(rxclk), tdm(intn), mss_uart(txd), uart1(rts), pcie1(clkreq), uart3(txd), ge(mdio) -mpp6 6 gpio, dev(ad11), ge0(txd3), spi0(csn2), au(i2sextclk), sata1(present_act), pcie2(clkreq), uart0(rxd), ptp(pulse) -mpp7 7 gpio, dev(ad10), ge0(txd2), spi0(csn1), spi1(csn1), sata0(present_act), led(data), uart0(txd), ptp(clk) -mpp8 8 gpio, dev(ad9), ge0(txd1), spi0(csn0), spi1(csn0), uart0(cts), led(stb), uart2(rxd), ptp(pclk_out), synce1(clk) -mpp9 9 gpio, dev(ad8), ge0(txd0), spi0(mosi), spi1(mosi), pcie(rstoutn), synce2(clk) -mpp10 10 gpio, dev(readyn), ge0(txctl), spi0(miso), spi1(miso), uart0(cts), sata1(present_act) -mpp11 11 gpio, dev(wen1), ge0(txclkout), spi0(clk), spi1(clk), uart0(rts), led(clk), uart2(txd), sata0(present_act) -mpp12 12 gpio, dev(clk_out), nf(rbn1), spi1(csn1), ge0(rxclk) -mpp13 13 gpio, dev(burstn), nf(rbn0), spi1(miso), ge0(rxctl), mss_spi(miso) -mpp14 14 gpio, dev(bootcsn), dev(csn0), spi1(csn0), spi0(csn3), au(i2sextclk), spi0(miso), sata0(present_act), mss_spi(csn) -mpp15 15 gpio, dev(ad7), spi1(mosi), spi0(mosi), mss_spi(mosi), ptp(pulse_cp2cp) -mpp16 16 gpio, dev(ad6), spi1(clk), mss_spi(clk) -mpp17 17 gpio, dev(ad5), ge0(txd3) -mpp18 18 gpio, dev(ad4), ge0(txd2), ptp(clk_cp2cp) -mpp19 19 gpio, dev(ad3), ge0(txd1), wakeup(out_cp2cp) -mpp20 20 gpio, dev(ad2), ge0(txd0) -mpp21 21 gpio, dev(ad1), ge0(txctl), sei(in_cp2cp) -mpp22 22 gpio, dev(ad0), ge0(txclkout), wakeup(in_cp2cp) -mpp23 23 gpio, dev(a1), au(i2smclk), link(rd_in_cp2cp) -mpp24 24 gpio, dev(a0), au(i2slrclk) -mpp25 25 gpio, dev(oen), au(i2sdo_spdifo) -mpp26 26 gpio, dev(wen0), au(i2sbclk) -mpp27 27 gpio, dev(csn0), spi1(miso), mss_gpio4, ge0(rxd3), spi0(csn4), ge(mdio), sata0(present_act), uart0(rts), rei(in_cp2cp) -mpp28 28 gpio, dev(csn1), spi1(csn0), mss_gpio5, ge0(rxd2), spi0(csn5), pcie2(clkreq), ptp(pulse), ge(mdc), sata1(present_act), uart0(cts), led(data) -mpp29 29 gpio, dev(csn2), spi1(mosi), mss_gpio6, ge0(rxd1), spi0(csn6), pcie1(clkreq), ptp(clk), mss_i2c(sda), sata0(present_act), uart0(rxd), led(stb) -mpp30 30 gpio, dev(csn3), spi1(clk), mss_gpio7, ge0(rxd0), spi0(csn7), pcie0(clkreq), ptp(pclk_out), mss_i2c(sck), sata1(present_act), uart0(txd), led(clk) -mpp31 31 gpio, dev(a2), mss_gpio4, pcie(rstoutn), ge(mdc) -mpp32 32 gpio, mii(col), mii(txerr), mss_spi(miso), tdm(drx), au(i2sextclk), au(i2sdi), ge(mdio), sdio(v18_en), pcie1(clkreq), mss_gpio0 -mpp33 33 gpio, mii(txclk), sdio(pwr10), mss_spi(csn), tdm(fsync), au(i2smclk), sdio(bus_pwr), xg(mdio), pcie2(clkreq), mss_gpio1 -mpp34 34 gpio, mii(rxerr), sdio(pwr11), mss_spi(mosi), tdm(dtx), au(i2slrclk), sdio(wr_protect), ge(mdc), pcie0(clkreq), mss_gpio2 -mpp35 35 gpio, sata1(present_act), i2c1(sda), mss_spi(clk), tdm(pclk), au(i2sdo_spdifo), sdio(card_detect), xg(mdio), ge(mdio), pcie(rstoutn), mss_gpio3 -mpp36 36 gpio, synce2(clk), i2c1(sck), ptp(clk), synce1(clk), au(i2sbclk), sata0(present_act), xg(mdc), ge(mdc), pcie2(clkreq), mss_gpio5 -mpp37 37 gpio, uart2(rxd), i2c0(sck), ptp(pclk_out), tdm(intn), mss_i2c(sck), sata1(present_act), ge(mdc), xg(mdc), pcie1(clkreq), mss_gpio6, link(rd_out_cp2cp) -mpp38 38 gpio, uart2(txd), i2c0(sda), ptp(pulse), tdm(rstn), mss_i2c(sda), sata0(present_act), ge(mdio), xg(mdio), au(i2sextclk), mss_gpio7, ptp(pulse_cp2cp) -mpp39 39 gpio, sdio(wr_protect), au(i2sbclk), ptp(clk), spi0(csn1), sata1(present_act), mss_gpio0 -mpp40 40 gpio, sdio(pwr11), synce1(clk), mss_i2c(sda), au(i2sdo_spdifo), ptp(pclk_out), spi0(clk), uart1(txd), ge(mdio), sata0(present_act), mss_gpio1 -mpp41 41 gpio, sdio(pwr10), sdio(bus_pwr), mss_i2c(sck), au(i2slrclk), ptp(pulse), spi0(mosi), uart1(rxd), ge(mdc), sata1(present_act), mss_gpio2, rei(out_cp2cp) -mpp42 42 gpio, sdio(v18_en), sdio(wr_protect), synce2(clk), au(i2smclk), mss_uart(txd), spi0(miso), uart1(cts), xg(mdc), sata0(present_act), mss_gpio4 -mpp43 43 gpio, sdio(card_detect), synce1(clk), au(i2sextclk), mss_uart(rxd), spi0(csn0), uart1(rts), xg(mdio), sata1(present_act), mss_gpio5, wakeup(out_cp2cp) -mpp44 44 gpio, ge1(txd2), uart0(rts), ptp(clk_cp2cp) -mpp45 45 gpio, ge1(txd3), uart0(txd), pcie(rstoutn) -mpp46 46 gpio, ge1(txd1), uart1(rts) -mpp47 47 gpio, ge1(txd0), spi1(clk), uart1(txd), ge(mdc) -mpp48 48 gpio, ge1(txctl_txen), spi1(mosi), xg(mdc), wakeup(in_cp2cp) -mpp49 49 gpio, ge1(txclkout), mii(crs), spi1(miso), uart1(rxd), ge(mdio), pcie0(clkreq), sdio(v18_en), sei(out_cp2cp) -mpp50 50 gpio, ge1(rxclk), mss_i2c(sda), spi1(csn0), uart2(txd), uart0(rxd), xg(mdio), sdio(pwr11) -mpp51 51 gpio, ge1(rxd0), mss_i2c(sck), spi1(csn1), uart2(rxd), uart0(cts), sdio(pwr10) -mpp52 52 gpio, ge1(rxd1), synce1(clk), synce2(clk), spi1(csn2), uart1(cts), led(clk), pcie(rstoutn), pcie0(clkreq) -mpp53 53 gpio, ge1(rxd2), ptp(clk), spi1(csn3), uart1(rxd), led(stb), sdio(led) -mpp54 54 gpio, ge1(rxd3), synce2(clk), ptp(pclk_out), synce1(clk), led(data), sdio(hw_rst), sdio_wp(wr_protect) -mpp55 55 gpio, ge1(rxctl_rxdv), ptp(pulse), sdio(led), sdio_cd(card_detect) -mpp56 56 gpio, tdm(drx), au(i2sdo_spdifo), spi0(clk), uart1(rxd), sata1(present_act), sdio(clk) -mpp57 57 gpio, mss_i2c(sda), ptp(pclk_out), tdm(intn), au(i2sbclk), spi0(mosi), uart1(txd), sata0(present_act), sdio(cmd) -mpp58 58 gpio, mss_i2c(sck), ptp(clk), tdm(rstn), au(i2sdi), spi0(miso), uart1(cts), led(clk), sdio(d0) -mpp59 59 gpio, mss_gpio7, synce2(clk), tdm(fsync), au(i2slrclk), spi0(csn0), uart0(cts), led(stb), uart1(txd), sdio(d1) -mpp60 60 gpio, mss_gpio6, ptp(pulse), tdm(dtx), au(i2smclk), spi0(csn1), uart0(rts), led(data), uart1(rxd), sdio(d2) -mpp61 61 gpio, mss_gpio5, ptp(clk), tdm(pclk), au(i2sextclk), spi0(csn2), uart0(txd), uart2(txd), sata1(present_act), ge(mdio), sdio(d3) -mpp62 62 gpio, mss_gpio4, synce1(clk), ptp(pclk_out), sata1(present_act), spi0(csn3), uart0(rxd), uart2(rxd), sata0(present_act), ge(mdc) - -GPIO: ------ - -For common binding part and usage, refer to -Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml. - -Required properties: - -- compatible: "marvell,armada-8k-gpio" - -- offset: offset address inside the syscon block - -Example: - -CP110_LABEL(syscon0): system-controller@440000 { - compatible = "syscon", "simple-mfd"; - reg = <0x440000 0x1000>; - - CP110_LABEL(clk): clock { - compatible = "marvell,cp110-clock"; - #clock-cells = <2>; - }; - - CP110_LABEL(pinctrl): pinctrl { - compatible = "marvell,armada-8k-cpm-pinctrl"; - }; - - CP110_LABEL(gpio1): gpio@100 { - compatible = "marvell,armada-8k-gpio"; - offset = <0x100>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>; - }; - -}; diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index f0427787369488..718d732174b9e3 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -38,6 +38,7 @@ properties: - const: mediatek,mt6580 - items: - enum: + - alcatel,yarisxl - prestigio,pmt5008-3g - const: mediatek,mt6582 - items: @@ -113,6 +114,12 @@ properties: - const: bananapi,bpi-r4-2g5 - const: bananapi,bpi-r4 - const: mediatek,mt7988a + - items: + - enum: + - bananapi,bpi-r4-pro-4e + - bananapi,bpi-r4-pro-8x + - const: bananapi,bpi-r4-pro + - const: mediatek,mt7988a - items: - enum: - mediatek,mt8127-moose @@ -445,6 +452,7 @@ properties: - enum: - kontron,3-5-sbc-i1200 - mediatek,mt8395-evk + - mediatek,mt8395-evk-ufs - radxa,nio-12l - const: mediatek,mt8395 - const: mediatek,mt8195 diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml index 7360a2849b5bd1..6e2e0c55184111 100644 --- a/Documentation/devicetree/bindings/arm/psci.yaml +++ b/Documentation/devicetree/bindings/arm/psci.yaml @@ -163,7 +163,6 @@ examples: method = "smc"; }; - - |+ // Case 3: PSCI v0.2 and PSCI v0.1. diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml index 4edc47483851f5..c349306f0d520e 100644 --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml @@ -36,9 +36,12 @@ properties: $nodename: pattern: "^tpdm(@[0-9a-f]+)$" compatible: - items: - - const: qcom,coresight-tpdm - - const: arm,primecell + oneOf: + - items: + - const: qcom,coresight-static-tpdm + - items: + - const: qcom,coresight-tpdm + - const: arm,primecell reg: maxItems: 1 @@ -147,4 +150,18 @@ examples: }; }; }; + + turing-llm-tpdm { + compatible = "qcom,coresight-static-tpdm"; + + qcom,cmb-element-bits = <32>; + + out-ports { + port { + turing_llm_tpdm_out: endpoint { + remote-endpoint = <&turing0_funnel_in1>; + }; + }; + }; + }; ... diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 18b5ed044f9fcc..d84bd3bca20105 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -88,6 +88,7 @@ properties: - items: - enum: + - asus,z00t - huawei,kiwi - longcheer,l9100 - samsung,a7 @@ -191,6 +192,11 @@ properties: - xiaomi,riva - const: qcom,msm8917 + - items: + - enum: + - xiaomi,land + - const: qcom,msm8937 + - items: - enum: - flipkart,rimob @@ -340,6 +346,7 @@ properties: - particle,tachyon - qcom,qcm6490-idp - qcom,qcs6490-rb3gen2 + - radxa,dragon-q6a - shift,otter - const: qcom,qcm6490 @@ -893,6 +900,7 @@ properties: - items: - enum: + - huawei,planck - lenovo,yoga-c630 - lg,judyln - lg,judyp @@ -1083,7 +1091,13 @@ properties: - items: - enum: - - asus,zenbook-a14-ux3407qa + - asus,zenbook-a14-ux3407qa-lcd + - asus,zenbook-a14-ux3407qa-oled + - const: asus,zenbook-a14-ux3407qa + - const: qcom,x1p42100 + + - items: + - enum: - hp,omnibook-x14-fe1 - lenovo,thinkbook-16 - qcom,x1p42100-crd @@ -1167,6 +1181,7 @@ allOf: - qcom,apq8094 - qcom,apq8096 - qcom,msm8917 + - qcom,msm8937 - qcom,msm8939 - qcom,msm8953 - qcom,msm8956 diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 6aceaa8acbb251..d496421dbd87e5 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -15,6 +15,11 @@ properties: compatible: oneOf: + - description: 100ASK DshanPi A1 board + items: + - const: 100ask,dshanpi-a1 + - const: rockchip,rk3576 + - description: 96boards RK3399 Ficus (ROCK960 Enterprise Edition) items: - const: vamrs,ficus @@ -25,6 +30,12 @@ properties: - const: vamrs,rock960 - const: rockchip,rk3399 + - description: 9Tripod X3568 series board + items: + - enum: + - 9tripod,x3568-v4 + - const: rockchip,rk3568 + - description: Amarula Vyasa RK3288 items: - const: amarula,vyasa-rk3288 @@ -78,13 +89,17 @@ properties: - description: Asus Tinker board items: - - const: asus,rk3288-tinker + - enum: + - asus,rk3288-tinker + - asus,rk3288-tinker-s - const: rockchip,rk3288 - - description: Asus Tinker board S + - description: Asus Tinker Board 3/3S items: - - const: asus,rk3288-tinker-s - - const: rockchip,rk3288 + - enum: + - asus,rk3566-tinker-board-3 + - asus,rk3566-tinker-board-3s + - const: rockchip,rk3566 - description: Beelink A1 items: @@ -330,6 +345,11 @@ properties: - friendlyarm,nanopi-r6s - const: rockchip,rk3588s + - description: FriendlyElec NanoPi R76S + items: + - const: friendlyarm,nanopi-r76s + - const: rockchip,rk3576 + - description: FriendlyElec NanoPi Zero2 items: - const: friendlyarm,nanopi-zero2 @@ -748,6 +768,11 @@ properties: - const: lckfb,tspi-rk3566 - const: rockchip,rk3566 + - description: LinkEase EasePi R1 + items: + - const: linkease,easepi-r1 + - const: rockchip,rk3568 + - description: Luckfox Core3576 Module based boards items: - enum: @@ -868,9 +893,11 @@ properties: - const: prt,mecsbc - const: rockchip,rk3568 - - description: QNAP TS-433-4G 4-Bay NAS + - description: QNAP TS-x33 NAS devices items: - - const: qnap,ts433 + - enum: + - qnap,ts233 + - qnap,ts433 - const: rockchip,rk3568 - description: Radxa Compute Module 3 (CM3) diff --git a/Documentation/devicetree/bindings/arm/tegra.yaml b/Documentation/devicetree/bindings/arm/tegra.yaml index 6139407c2cbf7a..50a31dba7becde 100644 --- a/Documentation/devicetree/bindings/arm/tegra.yaml +++ b/Documentation/devicetree/bindings/arm/tegra.yaml @@ -189,6 +189,11 @@ properties: - nvidia,p2371-2180 - nvidia,p2571 - nvidia,p2894-0050-a08 + - nvidia,p3450-0000 + - const: nvidia,tegra210 + - items: + - const: nvidia,p3541-0000 + - const: nvidia,p3450-0000 - const: nvidia,tegra210 - description: Jetson TX2 Developer Kit items: diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml index 0105dcda6e04d5..85deda6d42920f 100644 --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml @@ -37,6 +37,12 @@ properties: - const: phytec,am62a-phycore-som - const: ti,am62a7 + - description: K3 AM62L3 SoC and Boards + items: + - enum: + - ti,am62l3-evm + - const: ti,am62l3 + - description: K3 AM62P5 SoC and Boards items: - enum: @@ -158,6 +164,14 @@ properties: - ti,am654-evm - const: ti,am654 + - description: K3 AM69 SoC Toradex Aquila Modules and Carrier Boards + items: + - enum: + - toradex,aquila-am69-clover # Aquila AM69 Module on Clover Board + - toradex,aquila-am69-dev # Aquila AM69 Module on Aquila Development Board + - const: toradex,aquila-am69 # Aquila AM69 Module + - const: ti,j784s4 + - description: K3 J7200 SoC oneOf: - const: ti,j7200 @@ -194,6 +208,7 @@ properties: items: - enum: - beagle,am67a-beagley-ai + - kontron,sa67 # Kontron SMARC-sAM67 board - ti,j722s-evm - const: ti,j722s diff --git a/Documentation/devicetree/bindings/arm/ti/omap.yaml b/Documentation/devicetree/bindings/arm/ti/omap.yaml index aa5df4692e3720..14f1b9d8f59d90 100644 --- a/Documentation/devicetree/bindings/arm/ti/omap.yaml +++ b/Documentation/devicetree/bindings/arm/ti/omap.yaml @@ -129,6 +129,13 @@ properties: - const: phytec,am335x-phycore-som - const: ti,am33xx + - description: TQ-Systems TQMa335x[L] SoM + items: + - enum: + - tq,tqma3359-mba335x # MBa335x carrier board + - const: tq,tqma3359 + - const: ti,am33xx + - description: TI OMAP4430 SoC based platforms items: - enum: diff --git a/Documentation/devicetree/bindings/arm/ux500.yaml b/Documentation/devicetree/bindings/arm/ux500.yaml index b42d20fa435968..3a8611e5786e5b 100644 --- a/Documentation/devicetree/bindings/arm/ux500.yaml +++ b/Documentation/devicetree/bindings/arm/ux500.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Ux500 platforms maintainers: - - Linus Walleij + - Linus Walleij properties: $nodename: diff --git a/Documentation/devicetree/bindings/ata/ata-generic.yaml b/Documentation/devicetree/bindings/ata/ata-generic.yaml index 0697927f3d7e6f..9da341ea091e23 100644 --- a/Documentation/devicetree/bindings/ata/ata-generic.yaml +++ b/Documentation/devicetree/bindings/ata/ata-generic.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Generic Parallel ATA Controller maintainers: - - Linus Walleij + - Linus Walleij description: Generic Parallel ATA controllers supporting PIO modes only. diff --git a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml index 5290936665084a..66de6d4769c120 100644 --- a/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml +++ b/Documentation/devicetree/bindings/ata/cortina,gemini-sata-bridge.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Cortina Systems Gemini SATA Bridge maintainers: - - Linus Walleij + - Linus Walleij description: | The Gemini SATA bridge in a SoC-internal PATA to SATA bridge that diff --git a/Documentation/devicetree/bindings/ata/eswin,eic7700-ahci.yaml b/Documentation/devicetree/bindings/ata/eswin,eic7700-ahci.yaml new file mode 100644 index 00000000000000..6554e30018b3c6 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/eswin,eic7700-ahci.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ata/eswin,eic7700-ahci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Eswin EIC7700 SoC SATA Controller + +maintainers: + - Yulin Lu + - Huan He + +description: + AHCI SATA controller embedded into the EIC7700 SoC is based on the DWC AHCI + SATA v5.00a IP core. + +select: + properties: + compatible: + const: eswin,eic7700-ahci + required: + - compatible + +allOf: + - $ref: snps,dwc-ahci-common.yaml# + +properties: + compatible: + items: + - const: eswin,eic7700-ahci + - const: snps,dwc-ahci + + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + items: + - const: pclk + - const: aclk + + resets: + maxItems: 1 + + reset-names: + const: arst + + ports-implemented: + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - reset-names + - phys + - phy-names + - ports-implemented + +unevaluatedProperties: false + +examples: + - | + sata@50420000 { + compatible = "eswin,eic7700-ahci", "snps,dwc-ahci"; + reg = <0x50420000 0x10000>; + interrupt-parent = <&plic>; + interrupts = <58>; + clocks = <&clock 171>, <&clock 186>; + clock-names = "pclk", "aclk"; + phys = <&sata_phy>; + phy-names = "sata-phy"; + ports-implemented = <0x1>; + resets = <&reset 96>; + reset-names = "arst"; + }; diff --git a/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml b/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml index fa16f3767c6a56..32e11d8a0a3b09 100644 --- a/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml +++ b/Documentation/devicetree/bindings/ata/faraday,ftide010.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Faraday Technology FTIDE010 PATA controller maintainers: - - Linus Walleij + - Linus Walleij description: | This controller is the first Faraday IDE interface block, used in the diff --git a/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml b/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml index 378692010c5614..894a8b9eb910be 100644 --- a/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml +++ b/Documentation/devicetree/bindings/ata/intel,ixp4xx-compact-flash.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Intel IXP4xx CompactFlash Card Controller maintainers: - - Linus Walleij + - Linus Walleij description: | The IXP4xx network processors have a CompactFlash interface that presents diff --git a/Documentation/devicetree/bindings/ata/pata-common.yaml b/Documentation/devicetree/bindings/ata/pata-common.yaml index 4e867dd4d402b2..cee4bb7eb0b9c5 100644 --- a/Documentation/devicetree/bindings/ata/pata-common.yaml +++ b/Documentation/devicetree/bindings/ata/pata-common.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Common Properties for Parallel AT attachment (PATA) controllers maintainers: - - Linus Walleij + - Linus Walleij description: | This document defines device tree properties common to most Parallel diff --git a/Documentation/devicetree/bindings/ata/sata-common.yaml b/Documentation/devicetree/bindings/ata/sata-common.yaml index 58c9342b992558..667f48c3319597 100644 --- a/Documentation/devicetree/bindings/ata/sata-common.yaml +++ b/Documentation/devicetree/bindings/ata/sata-common.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Common Properties for Serial AT attachment (SATA) controllers maintainers: - - Linus Walleij + - Linus Walleij description: | This document defines device tree properties common to most Serial diff --git a/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml index 4c848fcb5a5d2f..7707cbed22600b 100644 --- a/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml +++ b/Documentation/devicetree/bindings/ata/snps,dwc-ahci.yaml @@ -33,6 +33,10 @@ properties: - description: SPEAr1340 AHCI SATA device const: snps,spear-ahci + iommus: + minItems: 1 + maxItems: 3 + patternProperties: "^sata-port@[0-9a-e]$": $ref: /schemas/ata/snps,dwc-ahci-common.yaml#/$defs/dwc-ahci-port diff --git a/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml b/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml index 439f7b811a94a4..51d68a778b5cb6 100644 --- a/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml +++ b/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: ARM Versatile Character LCD maintainers: - - Linus Walleij + - Linus Walleij - Rob Herring description: diff --git a/Documentation/devicetree/bindings/board/fsl,fpga-qixis-i2c.yaml b/Documentation/devicetree/bindings/board/fsl,fpga-qixis-i2c.yaml index 28b37772fb656e..e889dac052e76d 100644 --- a/Documentation/devicetree/bindings/board/fsl,fpga-qixis-i2c.yaml +++ b/Documentation/devicetree/bindings/board/fsl,fpga-qixis-i2c.yaml @@ -22,6 +22,13 @@ properties: - fsl,lx2160aqds-fpga - const: fsl,fpga-qixis-i2c - const: simple-mfd + - const: fsl,lx2160ardb-fpga + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 interrupts: maxItems: 1 @@ -32,10 +39,37 @@ properties: mux-controller: $ref: /schemas/mux/reg-mux.yaml +patternProperties: + "^gpio@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + contains: + enum: + - fsl,lx2160ardb-fpga-gpio-sfp + required: - compatible - reg +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,lx2160ardb-fpga + then: + required: + - "#address-cells" + - "#size-cells" + else: + properties: + "#address-cells": false + "#size-cells": false + additionalProperties: false examples: @@ -68,3 +102,27 @@ examples: }; }; + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + board-control@66 { + compatible = "fsl,lx2160ardb-fpga"; + reg = <0x66>; + #address-cells = <1>; + #size-cells = <0>; + + gpio@19 { + compatible = "fsl,lx2160ardb-fpga-gpio-sfp"; + reg = <0x19>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "SFP2_TX_EN", "", + "", "", + "SFP2_RX_LOS", "SFP2_TX_FAULT", + "", "SFP2_MOD_ABS"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/board/fsl,fpga-qixis.yaml b/Documentation/devicetree/bindings/board/fsl,fpga-qixis.yaml index 5a3cd431ef6e60..2eacb581b9fdd6 100644 --- a/Documentation/devicetree/bindings/board/fsl,fpga-qixis.yaml +++ b/Documentation/devicetree/bindings/board/fsl,fpga-qixis.yaml @@ -57,6 +57,16 @@ patternProperties: '^mdio-mux@[a-f0-9,]+$': $ref: /schemas/net/mdio-mux-mmioreg.yaml + '^gpio@[0-9a-f]+$': + type: object + additionalProperties: true + + properties: + compatible: + contains: + enum: + - fsl,ls1046aqds-fpga-gpio-stat-pres2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml index 24c939f5909108..cd5c2a532a9223 100644 --- a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml +++ b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml @@ -43,7 +43,7 @@ properties: maximum: 20000000 patternProperties: - "^.*@[0-9a-fA-F]+$": + "@[0-9a-f]+$": type: object additionalProperties: true properties: diff --git a/Documentation/devicetree/bindings/bus/cznic,moxtet.yaml b/Documentation/devicetree/bindings/bus/cznic,moxtet.yaml new file mode 100644 index 00000000000000..d340899ca5f121 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/cznic,moxtet.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bus/cznic,moxtet.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Turris Moxtet SPI bus + +maintainers: + - Marek Behún + +description: > + Turris Mox module status and configuration bus (over SPI) + + The driver finds the devices connected to the bus by itself, but it may be + needed to reference some of them from other parts of the device tree. In that + case the devices can be defined as subnodes of the moxtet node. + +properties: + compatible: + const: cznic,moxtet + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + spi-cpol: true + + spi-cpha: true + + spi-max-frequency: true + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - spi-cpol + - spi-cpha + - interrupts + - interrupt-controller + - "#interrupt-cells" + +additionalProperties: + type: object + + required: + - reg + +examples: + - | + #include + + spi { + #address-cells = <1>; + #size-cells = <0>; + + moxtet@1 { + compatible = "cznic,moxtet"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + spi-max-frequency = <10000000>; + spi-cpol; + spi-cpha; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gpiosb>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + + gpio@0 { + compatible = "cznic,moxtet-gpio"; + gpio-controller; + #gpio-cells = <2>; + reg = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml b/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml index 4adbb7afa889d4..6645352c7f6b4e 100644 --- a/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml +++ b/Documentation/devicetree/bindings/bus/fsl,imx8qxp-pixel-link-msi-bus.yaml @@ -70,7 +70,7 @@ properties: - const: ahb patternProperties: - "^.*@[0-9a-f]+$": + "@[0-9a-f]+$": description: Devices attached to the bus type: object diff --git a/Documentation/devicetree/bindings/bus/moxtet.txt b/Documentation/devicetree/bindings/bus/moxtet.txt deleted file mode 100644 index fb50fc86533689..00000000000000 --- a/Documentation/devicetree/bindings/bus/moxtet.txt +++ /dev/null @@ -1,46 +0,0 @@ -Turris Mox module status and configuration bus (over SPI) - -Required properties: - - compatible : Should be "cznic,moxtet" - - #address-cells : Has to be 1 - - #size-cells : Has to be 0 - - spi-cpol : Required inverted clock polarity - - spi-cpha : Required shifted clock phase - - interrupts : Must contain reference to the shared interrupt line - - interrupt-controller : Required - - #interrupt-cells : Has to be 1 - -For other required and optional properties of SPI slave nodes please refer to -../spi/spi-bus.txt. - -Required properties of subnodes: - - reg : Should be position on the Moxtet bus (how many Moxtet - modules are between this module and CPU module, so - either 0 or a positive integer) - -The driver finds the devices connected to the bus by itself, but it may be -needed to reference some of them from other parts of the device tree. In that -case the devices can be defined as subnodes of the moxtet node. - -Example: - - moxtet@1 { - compatible = "cznic,moxtet"; - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - spi-max-frequency = <10000000>; - spi-cpol; - spi-cpha; - interrupt-controller; - #interrupt-cells = <1>; - interrupt-parent = <&gpiosb>; - interrupts = <5 IRQ_TYPE_EDGE_FALLING>; - - moxtet_sfp: gpio@0 { - compatible = "cznic,moxtet-gpio"; - gpio-controller; - #gpio-cells = <2>; - reg = <0>; - } - }; diff --git a/Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml b/Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml index d12b62a3a5a88c..bf0af3424c9af8 100644 --- a/Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml +++ b/Documentation/devicetree/bindings/bus/st,stm32-etzpc.yaml @@ -44,7 +44,7 @@ properties: Contains the firewall ID associated to the peripheral. patternProperties: - "^.*@[0-9a-f]+$": + "@[0-9a-f]+$": description: Peripherals type: object diff --git a/Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml b/Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml index 20acd1a6b17362..4d19917ad2c305 100644 --- a/Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml +++ b/Documentation/devicetree/bindings/bus/st,stm32mp25-rifsc.yaml @@ -33,14 +33,18 @@ select: properties: compatible: contains: - const: st,stm32mp25-rifsc + enum: + - st,stm32mp21-rifsc + - st,stm32mp25-rifsc required: - compatible properties: compatible: items: - - const: st,stm32mp25-rifsc + - enum: + - st,stm32mp21-rifsc + - st,stm32mp25-rifsc - const: simple-bus reg: @@ -60,7 +64,7 @@ properties: Contains the firewall ID associated to the peripheral. patternProperties: - "^.*@[0-9a-f]+$": + "@[0-9a-f]+$": description: Peripherals type: object diff --git a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml index 37e3ebd554874f..a620a2ff5c5689 100644 --- a/Documentation/devicetree/bindings/cache/qcom,llcc.yaml +++ b/Documentation/devicetree/bindings/cache/qcom,llcc.yaml @@ -21,6 +21,7 @@ properties: compatible: enum: - qcom,ipq5424-llcc + - qcom,kaanapali-llcc - qcom,qcs615-llcc - qcom,qcs8300-llcc - qcom,qdu1000-llcc @@ -272,6 +273,7 @@ allOf: compatible: contains: enum: + - qcom,kaanapali-llcc - qcom,sm8450-llcc - qcom,sm8550-llcc - qcom,sm8650-llcc diff --git a/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml b/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml index 579bacb66f3481..c0e5ebb1fa4c72 100644 --- a/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml +++ b/Documentation/devicetree/bindings/cache/sifive,ccache0.yaml @@ -48,6 +48,11 @@ properties: - const: microchip,mpfs-ccache - const: sifive,fu540-c000-ccache - const: cache + - items: + - const: microchip,pic64gx-ccache + - const: microchip,mpfs-ccache + - const: sifive,fu540-c000-ccache + - const: cache cache-block-size: const: 64 diff --git a/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml index fe2c5c1baf4332..a8471367175b14 100644 --- a/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml +++ b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml @@ -64,8 +64,6 @@ allOf: reg: minItems: 2 - '#reset-cells': false - - if: properties: compatible: @@ -85,6 +83,7 @@ examples: reg = <0x1fa20000 0x400>, <0x1fb00000 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; }; - | diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml index c4714d0fbe077a..e588a7e8f260ec 100644 --- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml +++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml @@ -132,7 +132,6 @@ examples: "ahb_mp", "ahb_mali400"; }; - - | clk@1c20068 { #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt deleted file mode 100644 index 4c0807f28cfaa1..00000000000000 --- a/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt +++ /dev/null @@ -1,29 +0,0 @@ -* Xtal Clock bindings for Marvell Armada 37xx SoCs - -Marvell Armada 37xx SoCs allow to determine the xtal clock frequencies by -reading the gpio latch register. - -This node must be a subnode of the node exposing the register address -of the GPIO block where the gpio latch is located. -See Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt - -Required properties: -- compatible : shall be one of the following: - "marvell,armada-3700-xtal-clock" -- #clock-cells : from common clock binding; shall be set to 0 - -Optional properties: -- clock-output-names : from common clock binding; allows overwrite default clock - output names ("xtal") - -Example: -pinctrl_nb: pinctrl-nb@13800 { - compatible = "armada3710-nb-pinctrl", "syscon", "simple-mfd"; - reg = <0x13800 0x100>, <0x13C00 0x20>; - - xtalclk: xtal-clk { - compatible = "marvell,armada-3700-xtal-clock"; - clock-output-names = "xtal"; - #clock-cells = <0>; - }; -}; diff --git a/Documentation/devicetree/bindings/clock/fsl,imx8ulp-sim-lpav.yaml b/Documentation/devicetree/bindings/clock/fsl,imx8ulp-sim-lpav.yaml new file mode 100644 index 00000000000000..662e07528d768d --- /dev/null +++ b/Documentation/devicetree/bindings/clock/fsl,imx8ulp-sim-lpav.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/fsl,imx8ulp-sim-lpav.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8ULP LPAV System Integration Module (SIM) + +maintainers: + - Laurentiu Mihalcea + +description: + The i.MX8ULP LPAV subsystem contains a block control module known as + SIM LPAV, which offers functionalities such as clock gating or reset + line assertion/de-assertion. + +properties: + compatible: + const: fsl,imx8ulp-sim-lpav + + reg: + maxItems: 1 + + clocks: + maxItems: 3 + + clock-names: + items: + - const: bus + - const: core + - const: plat + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + mux-controller: + $ref: /schemas/mux/reg-mux.yaml# + +required: + - compatible + - reg + - clocks + - clock-names + - '#clock-cells' + - '#reset-cells' + - mux-controller + +additionalProperties: false + +examples: + - | + #include + + clock-controller@2da50000 { + compatible = "fsl,imx8ulp-sim-lpav"; + reg = <0x2da50000 0x10000>; + clocks = <&cgc2 IMX8ULP_CLK_LPAV_BUS_DIV>, + <&cgc2 IMX8ULP_CLK_HIFI_DIVCORE>, + <&cgc2 IMX8ULP_CLK_HIFI_DIVPLAT>; + clock-names = "bus", "core", "plat"; + #clock-cells = <1>; + #reset-cells = <1>; + + mux-controller { + compatible = "reg-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x8 0x00000200>; + }; + }; diff --git a/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml index caf442ead24bda..31e106ef913dea 100644 --- a/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml +++ b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml @@ -46,6 +46,9 @@ properties: "#clock-cells": const: 1 + power-domains: + maxItems: 1 + reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/clock/marvell,ap80x-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,ap80x-clock.yaml new file mode 100644 index 00000000000000..43b0631ba167d6 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/marvell,ap80x-clock.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/marvell,ap80x-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Armada AP80x System Controller Clocks + +maintainers: + - Gregory Clement + - Miquel Raynal + +description: > + The AP806/AP807 is one of the two core HW blocks of the Marvell Armada + 7K/8K/931x SoCs. It contains system controllers, which provide several + registers giving access to numerous features: clocks, pin-muxing and many + other SoC configuration items. + +properties: + compatible: + enum: + - marvell,ap806-clock + - marvell,ap806-cpu-clock + - marvell,ap807-clock + - marvell,ap807-cpu-clock + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + clocks: + items: + - description: cluster 0 parent clock phandle + - description: cluster 1 parent clock phandle + +required: + - compatible + - "#clock-cells" + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - marvell,ap806-cpu-clock + - marvell,ap807-cpu-clock + then: + required: + - clocks diff --git a/Documentation/devicetree/bindings/clock/marvell,cp110-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,cp110-clock.yaml new file mode 100644 index 00000000000000..ad0bc79b24c6eb --- /dev/null +++ b/Documentation/devicetree/bindings/clock/marvell,cp110-clock.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/marvell,cp110-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Armada CP110 System Controller Clocks + +maintainers: + - Gregory Clement + - Miquel Raynal + +description: > + The CP110 is one of the two core HW blocks of the Marvell Armada 7K/8K/931x + SoCs. It contains system controllers, which provide several registers giving + access to numerous features: clocks, pin-muxing and many other SoC + configuration items. + +properties: + compatible: + const: marvell,cp110-clock + + "#clock-cells": + const: 2 + description: > + The first cell must be 0 or 1. 0 for the core clocks and 1 for the + gateable clocks. The second cell identifies the particular core clock or + gateable clocks. + + The following clocks are available: + + - Core clocks + - 0 0 APLL + - 0 1 PPv2 core + - 0 2 EIP + - 0 3 Core + - 0 4 NAND core + - 0 5 SDIO core + + - Gateable clocks + - 1 0 Audio + - 1 1 Comm Unit + - 1 2 NAND + - 1 3 PPv2 + - 1 4 SDIO + - 1 5 MG Domain + - 1 6 MG Core + - 1 7 XOR1 + - 1 8 XOR0 + - 1 9 GOP DP + - 1 11 PCIe x1 0 + - 1 12 PCIe x1 1 + - 1 13 PCIe x4 + - 1 14 PCIe / XOR + - 1 15 SATA + - 1 16 SATA USB + - 1 17 Main + - 1 18 SD/MMC/GOP + - 1 21 Slow IO (SPI, NOR, BootROM, I2C, UART) + - 1 22 USB3H0 + - 1 23 USB3H1 + - 1 24 USB3 Device + - 1 25 EIP150 + - 1 26 EIP197 + +required: + - compatible + - "#clock-cells" + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml b/Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml index e4e1c31267d2a1..ee4f31596d9788 100644 --- a/Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml +++ b/Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml @@ -22,16 +22,23 @@ properties: const: microchip,mpfs-clkcfg reg: - items: - - description: | - clock config registers: - These registers contain enable, reset & divider tables for the, cpu, - axi, ahb and rtc/mtimer reference clocks as well as enable and reset - for the peripheral clocks. - - description: | - mss pll dri registers: - Block of registers responsible for dynamic reconfiguration of the mss - pll + oneOf: + - items: + - description: | + clock config registers: + These registers contain enable, reset & divider tables for the, cpu, + axi, ahb and rtc/mtimer reference clocks as well as enable and reset + for the peripheral clocks. + - description: | + mss pll dri registers: + Block of registers responsible for dynamic reconfiguration of the mss + pll + deprecated: true + - items: + - description: | + mss pll dri registers: + Block of registers responsible for dynamic reconfiguration of the mss + pll clocks: maxItems: 1 @@ -69,11 +76,12 @@ examples: - | #include soc { - #address-cells = <2>; - #size-cells = <2>; - clkcfg: clock-controller@20002000 { + #address-cells = <1>; + #size-cells = <1>; + + clkcfg: clock-controller@3E001000 { compatible = "microchip,mpfs-clkcfg"; - reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>; + reg = <0x3E001000 0x1000>; clocks = <&ref>; #clock-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml index a9ba21144a5689..13bb616249a16b 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.yaml @@ -37,7 +37,7 @@ properties: '#clock-cells': const: 1 - "#reset-cells": + '#reset-cells': const: 1 nvidia,external-memory-controller: @@ -46,7 +46,7 @@ properties: phandle of the external memory controller node patternProperties: - "^emc-timings-[0-9]+$": + '^emc-timings-[0-9]+$': type: object properties: nvidia,ram-code: @@ -56,7 +56,7 @@ patternProperties: this timing set is used for patternProperties: - "^timing-[0-9]+$": + '^timing-[0-9]+$': type: object properties: clock-frequency: @@ -94,7 +94,7 @@ required: - compatible - reg - '#clock-cells' - - "#reset-cells" + - '#reset-cells' additionalProperties: false diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml index bee2dd4b29bfe3..73cccc0df424d6 100644 --- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml +++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.yaml @@ -39,11 +39,11 @@ properties: '#clock-cells': const: 1 - "#reset-cells": + '#reset-cells': const: 1 patternProperties: - "^(sclk)|(pll-[cem])$": + '^(sclk)|(pll-[cem])$': type: object properties: compatible: @@ -76,7 +76,7 @@ required: - compatible - reg - '#clock-cells' - - "#reset-cells" + - '#reset-cells' additionalProperties: false diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq9574-nsscc.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq9574-nsscc.yaml index 17252b6ea3bec7..7ff4ff3587cad4 100644 --- a/Documentation/devicetree/bindings/clock/qcom,ipq9574-nsscc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,ipq9574-nsscc.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/clock/qcom,ipq9574-nsscc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Networking Sub System Clock & Reset Controller on IPQ9574 +title: Qualcomm Networking Sub System Clock & Reset Controller on IPQ9574 and IPQ5424 maintainers: - Bjorn Andersson @@ -12,21 +12,29 @@ maintainers: description: | Qualcomm networking sub system clock control module provides the clocks, - resets on IPQ9574 + resets on IPQ9574 and IPQ5424 - See also:: + See also: + include/dt-bindings/clock/qcom,ipq5424-nsscc.h include/dt-bindings/clock/qcom,ipq9574-nsscc.h + include/dt-bindings/reset/qcom,ipq5424-nsscc.h include/dt-bindings/reset/qcom,ipq9574-nsscc.h properties: compatible: - const: qcom,ipq9574-nsscc + enum: + - qcom,ipq5424-nsscc + - qcom,ipq9574-nsscc clocks: items: - description: Board XO source - - description: CMN_PLL NSS 1200MHz (Bias PLL cc) clock source - - description: CMN_PLL PPE 353MHz (Bias PLL ubi nc) clock source + - description: CMN_PLL NSS (Bias PLL cc) clock source. This clock rate + can vary for different IPQ SoCs. For example, it is 1200 MHz on the + IPQ9574 and 300 MHz on the IPQ5424. + - description: CMN_PLL PPE (Bias PLL ubi nc) clock source. The clock + rate can vary for different IPQ SoCs. For example, it is 353 MHz + on the IPQ9574 and 375 MHz on the IPQ5424. - description: GCC GPLL0 OUT AUX clock source - description: Uniphy0 NSS Rx clock source - description: Uniphy0 NSS Tx clock source @@ -42,8 +50,12 @@ properties: clock-names: items: - const: xo - - const: nss_1200 - - const: ppe_353 + - enum: + - nss_1200 + - nss + - enum: + - ppe_353 + - ppe - const: gpll0_out - const: uniphy0_rx - const: uniphy0_tx @@ -60,6 +72,40 @@ required: allOf: - $ref: qcom,gcc.yaml# + - if: + properties: + compatible: + const: qcom,ipq9574-nsscc + then: + properties: + clock-names: + items: + - const: xo + - const: nss_1200 + - const: ppe_353 + - const: gpll0_out + - const: uniphy0_rx + - const: uniphy0_tx + - const: uniphy1_rx + - const: uniphy1_tx + - const: uniphy2_rx + - const: uniphy2_tx + - const: bus + else: + properties: + clock-names: + items: + - const: xo + - const: nss + - const: ppe + - const: gpll0_out + - const: uniphy0_rx + - const: uniphy0_tx + - const: uniphy1_rx + - const: uniphy1_tx + - const: uniphy2_rx + - const: uniphy2_tx + - const: bus unevaluatedProperties: false @@ -94,5 +140,6 @@ examples: "bus"; #clock-cells = <1>; #reset-cells = <1>; + #interconnect-cells = <1>; }; ... diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml index 90cd3feab5fa00..ab97d4b7dba8bc 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml @@ -8,7 +8,7 @@ title: Qualcomm RPM Clock Controller maintainers: - Bjorn Andersson - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: | The clock enumerators are defined in and diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml index 78fa0572668578..3f5f1336262ee6 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml @@ -18,6 +18,7 @@ properties: compatible: enum: - qcom,glymur-rpmh-clk + - qcom,kaanapali-rpmh-clk - qcom,milos-rpmh-clk - qcom,qcs615-rpmh-clk - qcom,qdu1000-rpmh-clk diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml index fcd2727dae4671..b31bd833552937 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Video Clock & Reset Controller on SM8450 maintainers: - - Taniya Das + - Taniya Das - Jagadeesh Kona description: | @@ -17,6 +17,7 @@ description: | See also: include/dt-bindings/clock/qcom,sm8450-videocc.h include/dt-bindings/clock/qcom,sm8650-videocc.h + include/dt-bindings/clock/qcom,sm8750-videocc.h properties: compatible: @@ -25,6 +26,7 @@ properties: - qcom,sm8475-videocc - qcom,sm8550-videocc - qcom,sm8650-videocc + - qcom,sm8750-videocc - qcom,x1e80100-videocc clocks: @@ -61,6 +63,7 @@ allOf: enum: - qcom,sm8450-videocc - qcom,sm8550-videocc + - qcom,sm8750-videocc then: required: - required-opps diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml index 2c992b3437f29b..784fef8306812c 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml @@ -25,6 +25,7 @@ properties: items: - enum: - qcom,glymur-tcsr + - qcom,kaanapali-tcsr - qcom,milos-tcsr - qcom,sar2130p-tcsr - qcom,sm8550-tcsr diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8750-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8750-gcc.yaml index aab7039fd28db2..0114d347b26ff0 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8750-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8750-gcc.yaml @@ -13,11 +13,15 @@ description: | Qualcomm global clock control module provides the clocks, resets and power domains on SM8750 - See also: include/dt-bindings/clock/qcom,sm8750-gcc.h + See also: + include/dt-bindings/clock/qcom,kaanapali-gcc.h + include/dt-bindings/clock/qcom,sm8750-gcc.h properties: compatible: - const: qcom,sm8750-gcc + enum: + - qcom,kaanapali-gcc + - qcom,sm8750-gcc clocks: items: diff --git a/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml index 68dde0720c7113..1b15b507095455 100644 --- a/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml @@ -32,9 +32,36 @@ properties: - description: PCIe 5 pipe clock - description: PCIe 6a pipe clock - description: PCIe 6b pipe clock - - description: USB QMP Phy 0 clock source - - description: USB QMP Phy 1 clock source - - description: USB QMP Phy 2 clock source + - description: USB4_0 QMPPHY clock source + - description: USB4_1 QMPPHY clock source + - description: USB4_2 QMPPHY clock source + - description: USB4_0 PHY DP0 GMUX clock source + - description: USB4_0 PHY DP1 GMUX clock source + - description: USB4_0 PHY PCIE PIPEGMUX clock source + - description: USB4_0 PHY PIPEGMUX clock source + - description: USB4_0 PHY SYS PCIE PIPEGMUX clock source + - description: USB4_1 PHY DP0 GMUX 2 clock source + - description: USB4_1 PHY DP1 GMUX 2 clock source + - description: USB4_1 PHY PCIE PIPEGMUX clock source + - description: USB4_1 PHY PIPEGMUX clock source + - description: USB4_1 PHY SYS PCIE PIPEGMUX clock source + - description: USB4_2 PHY DP0 GMUX 2 clock source + - description: USB4_2 PHY DP1 GMUX 2 clock source + - description: USB4_2 PHY PCIE PIPEGMUX clock source + - description: USB4_2 PHY PIPEGMUX clock source + - description: USB4_2 PHY SYS PCIE PIPEGMUX clock source + - description: USB4_0 PHY RX 0 clock source + - description: USB4_0 PHY RX 1 clock source + - description: USB4_1 PHY RX 0 clock source + - description: USB4_1 PHY RX 1 clock source + - description: USB4_2 PHY RX 0 clock source + - description: USB4_2 PHY RX 1 clock source + - description: USB4_0 PHY PCIE PIPE clock source + - description: USB4_0 PHY max PIPE clock source + - description: USB4_1 PHY PCIE PIPE clock source + - description: USB4_1 PHY max PIPE clock source + - description: USB4_2 PHY PCIE PIPE clock source + - description: USB4_2 PHY max PIPE clock source power-domains: description: @@ -67,7 +94,34 @@ examples: <&pcie6b_phy>, <&usb_1_ss0_qmpphy 0>, <&usb_1_ss1_qmpphy 1>, - <&usb_1_ss2_qmpphy 2>; + <&usb_1_ss2_qmpphy 2>, + <&usb4_0_phy_dp0_gmux_clk>, + <&usb4_0_phy_dp1_gmux_clk>, + <&usb4_0_phy_pcie_pipegmux_clk>, + <&usb4_0_phy_pipegmux_clk>, + <&usb4_0_phy_sys_pcie_pipegmux_clk>, + <&usb4_1_phy_dp0_gmux_2_clk>, + <&usb4_1_phy_dp1_gmux_2_clk>, + <&usb4_1_phy_pcie_pipegmux_clk>, + <&usb4_1_phy_pipegmux_clk>, + <&usb4_1_phy_sys_pcie_pipegmux_clk>, + <&usb4_2_phy_dp0_gmux_2_clk>, + <&usb4_2_phy_dp1_gmux_2_clk>, + <&usb4_2_phy_pcie_pipegmux_clk>, + <&usb4_2_phy_pipegmux_clk>, + <&usb4_2_phy_sys_pcie_pipegmux_clk>, + <&usb4_0_phy_rx_0_clk>, + <&usb4_0_phy_rx_1_clk>, + <&usb4_1_phy_rx_0_clk>, + <&usb4_1_phy_rx_1_clk>, + <&usb4_2_phy_rx_0_clk>, + <&usb4_2_phy_rx_1_clk>, + <&usb4_0_phy_pcie_pipe_clk>, + <&usb4_0_phy_max_pipe_clk>, + <&usb4_1_phy_pcie_pipe_clk>, + <&usb4_1_phy_max_pipe_clk>, + <&usb4_2_phy_pcie_pipe_clk>, + <&usb4_2_phy_max_pipe_clk>; power-domains = <&rpmhpd RPMHPD_CX>; #clock-cells = <1>; #reset-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml index bc2fd3761328c1..655154534c0f13 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml @@ -99,7 +99,6 @@ properties: the datasheet. const: 1 - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3506-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3506-cru.yaml new file mode 100644 index 00000000000000..ca940475336ce7 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3506-cru.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rk3506-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3506 Clock and Reset Unit (CRU) + +maintainers: + - Finley Xiao + - Heiko Stuebner + +description: + The RK3506 CRU generates the clock and also implements reset for SoC + peripherals. + +properties: + compatible: + const: rockchip,rk3506-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + clock-controller@ff9a0000 { + compatible = "rockchip,rk3506-cru"; + reg = <0xff9a0000 0x20000>; + #clock-cells = <1>; + #reset-cells = <1>; + clocks = <&xin24m>; + clock-names = "xin"; + }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rv1126b-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rv1126b-cru.yaml new file mode 100644 index 00000000000000..04b0a5c51e4e0f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rv1126b-cru.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/rockchip,rv1126b-cru.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RV1126B Clock and Reset Unit + +maintainers: + - Elaine Zhang + - Heiko Stuebner + +description: + The rv1126b clock controller generates the clock and also implements a + reset controller for SoC peripherals. + +properties: + compatible: + enum: + - rockchip,rv1126b-cru + + reg: + maxItems: 1 + + "#clock-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xin24m + +required: + - compatible + - reg + - "#clock-cells" + - "#reset-cells" + +additionalProperties: false + +examples: + - | + clock-controller@20000000 { + compatible = "rockchip,rv1126b-cru"; + reg = <0x20000000 0xc0000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml index 72f59db73f76c7..5bf905f88a1ac1 100644 --- a/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml +++ b/Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml @@ -38,6 +38,8 @@ properties: - samsung,exynosautov920-cmu-hsi0 - samsung,exynosautov920-cmu-hsi1 - samsung,exynosautov920-cmu-hsi2 + - samsung,exynosautov920-cmu-m2m + - samsung,exynosautov920-cmu-mfc - samsung,exynosautov920-cmu-misc - samsung,exynosautov920-cmu-peric0 - samsung,exynosautov920-cmu-peric1 @@ -226,6 +228,46 @@ allOf: - const: embd - const: ethernet + - if: + properties: + compatible: + contains: + const: samsung,exynosautov920-cmu-m2m + + then: + properties: + clocks: + items: + - description: External reference clock (38.4 MHz) + - description: CMU_M2M NOC clock (from CMU_TOP) + - description: CMU_M2M JPEG clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: noc + - const: jpeg + + - if: + properties: + compatible: + contains: + const: samsung,exynosautov920-cmu-mfc + + then: + properties: + clocks: + items: + - description: External reference clock (38.4 MHz) + - description: CMU_MFC MFC clock (from CMU_TOP) + - description: CMU_MFC WFD clock (from CMU_TOP) + + clock-names: + items: + - const: oscclk + - const: mfc + - const: wfd + required: - compatible - "#clock-cells" diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.yaml index 502cd723511fa4..b131390207d6de 100644 --- a/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.yaml +++ b/Documentation/devicetree/bindings/clock/sprd,sc9860-clk.yaml @@ -114,25 +114,6 @@ allOf: - reg properties: sprd,syscon: false - - if: - properties: - compatible: - contains: - enum: - - sprd,sc9860-agcp-gate - - sprd,sc9860-aon-gate - - sprd,sc9860-apahb-gate - - sprd,sc9860-apapb-gate - - sprd,sc9860-cam-gate - - sprd,sc9860-disp-gate - - sprd,sc9860-pll - - sprd,sc9860-pmu-gate - - sprd,sc9860-vsp-gate - then: - required: - - sprd,syscon - properties: - reg: false additionalProperties: false @@ -142,13 +123,6 @@ examples: #address-cells = <2>; #size-cells = <2>; - pmu-gate { - compatible = "sprd,sc9860-pmu-gate"; - clocks = <&ext_26m>; - #clock-cells = <1>; - sprd,syscon = <&pmu_regs>; - }; - clock-controller@20000000 { compatible = "sprd,sc9860-ap-clk"; reg = <0 0x20000000 0 0x400>; diff --git a/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml b/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml index 2150307219a0c1..4ebfa5a8d5242b 100644 --- a/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml +++ b/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml @@ -8,7 +8,7 @@ title: ST-Ericsson DB8500 (U8500) clocks maintainers: - Ulf Hansson - - Linus Walleij + - Linus Walleij description: While named "U8500 clocks" these clocks are inside the DB8500 digital baseband system-on-chip and its siblings such as diff --git a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml index b44a76a958f4ee..b497c28e8094fc 100644 --- a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml +++ b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml @@ -22,7 +22,6 @@ properties: - xlnx,clocking-wizard-v6.0 - xlnx,versal-clk-wizard - reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/crypto/amd,ccp-seattle-v1a.yaml b/Documentation/devicetree/bindings/crypto/amd,ccp-seattle-v1a.yaml index 32bf3a1c3b420f..5fb70847105915 100644 --- a/Documentation/devicetree/bindings/crypto/amd,ccp-seattle-v1a.yaml +++ b/Documentation/devicetree/bindings/crypto/amd,ccp-seattle-v1a.yaml @@ -21,6 +21,9 @@ properties: dma-coherent: true + iommus: + maxItems: 4 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml index a4006237aa89fd..fd20b8197207a0 100644 --- a/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml +++ b/Documentation/devicetree/bindings/crypto/intel,ixp4xx-crypto.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Intel IXP4xx cryptographic engine maintainers: - - Linus Walleij + - Linus Walleij description: | The Intel IXP4xx cryptographic engine makes use of the IXP4xx NPE diff --git a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml index 08fe6a707a3714..c3408dcf5d2057 100644 --- a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml +++ b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml @@ -13,6 +13,7 @@ properties: compatible: items: - enum: + - qcom,kaanapali-inline-crypto-engine - qcom,qcs8300-inline-crypto-engine - qcom,sa8775p-inline-crypto-engine - qcom,sc7180-inline-crypto-engine diff --git a/Documentation/devicetree/bindings/crypto/qcom,prng.yaml b/Documentation/devicetree/bindings/crypto/qcom,prng.yaml index ed7e16bd11d33c..597441d94cf1ee 100644 --- a/Documentation/devicetree/bindings/crypto/qcom,prng.yaml +++ b/Documentation/devicetree/bindings/crypto/qcom,prng.yaml @@ -20,6 +20,7 @@ properties: - qcom,ipq5332-trng - qcom,ipq5424-trng - qcom,ipq9574-trng + - qcom,kaanapali-trng - qcom,qcs615-trng - qcom,qcs8300-trng - qcom,sa8255p-trng diff --git a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml index e009cb712fb8a2..79d5be2548bc52 100644 --- a/Documentation/devicetree/bindings/crypto/qcom-qce.yaml +++ b/Documentation/devicetree/bindings/crypto/qcom-qce.yaml @@ -45,6 +45,7 @@ properties: - items: - enum: + - qcom,kaanapali-qce - qcom,qcs615-qce - qcom,qcs8300-qce - qcom,sa8775p-qce diff --git a/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml index e3379d1067283e..ea1dc86bc31f63 100644 --- a/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml +++ b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml @@ -19,11 +19,14 @@ description: | properties: compatible: - enum: - - nvidia,tegra30-actmon - - nvidia,tegra114-actmon - - nvidia,tegra124-actmon - - nvidia,tegra210-actmon + oneOf: + - enum: + - nvidia,tegra30-actmon + - nvidia,tegra114-actmon + - nvidia,tegra124-actmon + - items: + - const: nvidia,tegra210-actmon + - const: nvidia,tegra124-actmon reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml index 98e8240a05bd9a..995b3ef408b79b 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml @@ -121,5 +121,4 @@ examples: }; }; - ... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml index 895506d93f4cf1..85a6086cc10e61 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml @@ -121,5 +121,4 @@ examples: }; }; - ... diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml index 60fd927b5a0664..c43b02ec884fee 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml @@ -142,7 +142,6 @@ then: reset-names: minItems: 2 - additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml index cb0a90f0232190..3ae45db85ea793 100644 --- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml +++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml @@ -25,7 +25,6 @@ description: | M |-------|______|----|____________| |________________| | | ___|__________________________________________________________|_______________| - VIU: Video Input Unit --------------------- diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml index 6d11f5955b51a3..c1cefd547391be 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml @@ -56,22 +56,12 @@ properties: - const: cec interrupts: - items: - - description: CEC TX interrupt - - description: CEC RX interrupt - - description: CEC stuck at low interrupt - - description: Wake-up interrupt - - description: Hotplug connected interrupt - - description: Hotplug removed interrupt + minItems: 5 + maxItems: 6 interrupt-names: - items: - - const: cec-tx - - const: cec-rx - - const: cec-low - - const: wakeup - - const: hpd-connected - - const: hpd-removed + minItems: 5 + maxItems: 6 ddc: $ref: /schemas/types.yaml#/definitions/phandle @@ -112,6 +102,61 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - brcm,bcm2711-hdmi0 + - brcm,bcm2711-hdmi1 + then: + properties: + interrupts: + items: + - description: CEC TX interrupt + - description: CEC RX interrupt + - description: CEC stuck at low interrupt + - description: Wake-up interrupt + - description: Hotplug connected interrupt + - description: Hotplug removed interrupt + interrupt-names: + items: + - const: cec-tx + - const: cec-rx + - const: cec-low + - const: wakeup + - const: hpd-connected + - const: hpd-removed + + - if: + properties: + compatible: + contains: + enum: + - brcm,bcm2712-hdmi0 + - brcm,bcm2712-hdmi1 + then: + properties: + interrupts: + items: + - description: CEC TX interrupt + - description: CEC RX interrupt + - description: CEC stuck at low interrupt + - description: Hotplug connected interrupt + - description: Hotplug removed interrupt + interrupts-names: + items: + - const: cec-tx + - const: cec-rx + - const: cec-low + - const: hpd-connected + - const: hpd-removed + + required: + - interrupts + - interrupt-names + examples: - | hdmi0: hdmi@7ef00700 { @@ -136,6 +181,9 @@ examples: "hd"; clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>; clock-names = "hdmi", "bvb", "audio", "cec"; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>; + interrupt-names = "cec-tx", "cec-rx", "cec-low", "wakeup", + "hpd-connected", "hpd-removed"; resets = <&dvp 0>; ddc = <&ddc0>; }; diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml index f91c9dce2a44d3..9aca38a58a1629 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml @@ -20,11 +20,20 @@ properties: maxItems: 1 interrupts: - maxItems: 1 + minItems: 1 + maxItems: 3 + + interrupt-names: + minItems: 1 + maxItems: 3 clocks: - maxItems: 1 - description: Core Clock + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 required: - compatible @@ -33,17 +42,68 @@ required: additionalProperties: false -if: - properties: - compatible: - contains: - enum: - - brcm,bcm2711-hvs - - brcm,bcm2712-hvs - -then: - required: - - clocks +allOf: + - if: + properties: + compatible: + contains: + const: brcm,bcm2711-hvs + + then: + properties: + clocks: + items: + - description: Core Clock + interrupts: + maxItems: 1 + clock-names: false + interrupt-names: false + + required: + - clocks + + - if: + properties: + compatible: + contains: + const: brcm,bcm2712-hvs + + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + clock-names: + items: + - const: core + - const: disp + interrupts: + items: + - description: Channel 0 End of frame + - description: Channel 1 End of frame + - description: Channel 2 End of frame + interrupt-names: + items: + - const: ch0-eof + - const: ch1-eof + - const: ch2-eof + required: + - clocks + - clock-names + - interrupt-names + + - if: + properties: + compatible: + contains: + const: brcm,bcm2835-hvs + + then: + properties: + interrupts: + maxItems: 1 + clock-names: false + interrupt-names: false examples: - | diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml index 5bbe81862c8f98..d29a0d06187e81 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml @@ -156,7 +156,6 @@ else: adi,input-style: false adi,input-justification: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml index 05442d43775521..6211ab8bbb0e57 100644 --- a/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml @@ -49,6 +49,10 @@ properties: $ref: /schemas/graph.yaml#/properties/port description: HDMI output port + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel audio input port + required: - port@0 - port@1 @@ -98,5 +102,13 @@ examples: remote-endpoint = <&hdmi0_con>; }; }; + + port@2 { + reg = <2>; + + endpoint { + remote-endpoint = <&pai_to_hdmi_tx>; + }; + }; }; }; diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml index ba644c30dcf411..17d1f97ce8c289 100644 --- a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml @@ -19,6 +19,7 @@ properties: compatible: enum: - ite,it66121 + - ite,it66122 - ite,it6610 reg: diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml index 0487bbffd7f7c4..4f7d3e9cf0c229 100644 --- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml @@ -131,7 +131,6 @@ required: additionalProperties: false - examples: - | lvds-encoder { diff --git a/Documentation/devicetree/bindings/display/bridge/parade,ps8622.yaml b/Documentation/devicetree/bindings/display/bridge/parade,ps8622.yaml index e6397ac2048b11..235018a81e85d7 100644 --- a/Documentation/devicetree/bindings/display/bridge/parade,ps8622.yaml +++ b/Documentation/devicetree/bindings/display/bridge/parade,ps8622.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Parade PS8622/PS8625 DisplayPort to LVDS Converter maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski properties: compatible: diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml index c167795c63f640..b95f10edd3a29a 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml @@ -14,6 +14,9 @@ description: | R-Car Gen4 SoCs. The encoder can operate in either DSI or CSI-2 mode, with up to four data lanes. +allOf: + - $ref: /schemas/display/dsi-controller.yaml# + properties: compatible: enum: @@ -80,14 +83,14 @@ required: - resets - ports -additionalProperties: false +unevaluatedProperties: false examples: - | #include #include - dsi0: dsi-encoder@fed80000 { + dsi@fed80000 { compatible = "renesas,r8a779a0-dsi-csi2-tx"; reg = <0xfed80000 0x10000>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; @@ -117,4 +120,51 @@ examples: }; }; }; + + - | + #include + #include + + dsi@fed80000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,r8a779g0-dsi-csi2-tx"; + reg = <0xfed80000 0x10000>; + clocks = <&cpg CPG_MOD 415>, + <&cpg CPG_CORE R8A779G0_CLK_DSIEXT>, + <&cpg CPG_CORE R8A779G0_CLK_DSIREF>; + clock-names = "fck", "dsi", "pll"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 415>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + dsi0port1_out: endpoint { + remote-endpoint = <&panel_in>; + data-lanes = <1 2>; + }; + }; + }; + + panel@0 { + reg = <0>; + compatible = "raspberrypi,dsi-7inch", "ilitek,ili9881c"; + power-supply = <&vcc_lcd_reg>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0port1_out>; + }; + }; + }; + }; ... diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii8620.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii8620.yaml index 6d1a36b76fcb27..a5fe46de3535e1 100644 --- a/Documentation/devicetree/bindings/display/bridge/sil,sii8620.yaml +++ b/Documentation/devicetree/bindings/display/bridge/sil,sii8620.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Silicon Image SiI8620 HDMI/MHL bridge maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski properties: compatible: diff --git a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml index 9ef587d4650602..20c7e0a77802fb 100644 --- a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml +++ b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml @@ -27,7 +27,9 @@ properties: - const: adi,adv7123 - enum: - adi,adv7123 + - asl-tek,cs5263 - dumb-vga-dac + - parade,ps185hdm - radxa,ra620 - realtek,rtd2171 - ti,opa362 diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml index b78f64c9c5f44e..70f229dc4e0c4e 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml @@ -123,7 +123,6 @@ properties: - required: - port@1 - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/dsi-controller.yaml b/Documentation/devicetree/bindings/display/dsi-controller.yaml index bb4d6e9e7d0cae..850b86fe03ccb1 100644 --- a/Documentation/devicetree/bindings/display/dsi-controller.yaml +++ b/Documentation/devicetree/bindings/display/dsi-controller.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Common Properties for DSI Display Panels maintainers: - - Linus Walleij + - Linus Walleij description: | This document defines device tree properties common to DSI, Display diff --git a/Documentation/devicetree/bindings/display/faraday,tve200.yaml b/Documentation/devicetree/bindings/display/faraday,tve200.yaml index e2ee7776732112..b09628b69177c6 100644 --- a/Documentation/devicetree/bindings/display/faraday,tve200.yaml +++ b/Documentation/devicetree/bindings/display/faraday,tve200.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Faraday TV Encoder TVE200 maintainers: - - Linus Walleij + - Linus Walleij properties: compatible: diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml index 9cc1fd0751cdbf..7d78edc403dceb 100644 --- a/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml +++ b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml @@ -54,7 +54,6 @@ examples: #address-cells = <1>; #size-cells = <0>; - display@0{ compatible = "waveshare,rpi-lcd-35", "ilitek,ili9486"; reg = <0>; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pai.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pai.yaml new file mode 100644 index 00000000000000..4f99682a308dbe --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pai.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8mp-hdmi-pai.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8MP HDMI Parallel Audio Interface + +maintainers: + - Shengjiu Wang + +description: + The HDMI TX Parallel Audio Interface (HTX_PAI) is a bridge between the + Audio Subsystem to the HDMI TX Controller. + +properties: + compatible: + const: fsl,imx8mp-hdmi-pai + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: apb + + power-domains: + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/properties/port + description: Output to the HDMI TX controller. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + - port + +additionalProperties: false + +examples: + - | + #include + #include + + audio-bridge@32fc4800 { + compatible = "fsl,imx8mp-hdmi-pai"; + reg = <0x32fc4800 0x800>; + interrupt-parent = <&irqsteer_hdmi>; + interrupts = <14>; + clocks = <&clk IMX8MP_CLK_HDMI_APB>; + clock-names = "apb"; + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PAI>; + + port { + pai_to_hdmi_tx: endpoint { + remote-endpoint = <&hdmi_tx_from_pai>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml index aeb4e4f36044a0..ebda78db87a68b 100644 --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml @@ -18,6 +18,7 @@ properties: compatible: oneOf: - enum: + - qcom,glymur-dp - qcom,sa8775p-dp - qcom,sc7180-dp - qcom,sc7280-dp @@ -31,6 +32,11 @@ properties: - qcom,sm8650-dp - qcom,x1e80100-dp + - items: + - enum: + - qcom,qcs8300-dp + - const: qcom,sa8775p-dp + - items: - enum: - qcom,sm6350-dp @@ -53,6 +59,12 @@ properties: - qcom,sm8550-dp - const: qcom,sm8350-dp + - items: + - enum: + - qcom,sm6150-dp + - const: qcom,sm8150-dp + - const: qcom,sm8350-dp + - items: - enum: - qcom,sm8750-dp @@ -195,9 +207,11 @@ allOf: compatible: contains: enum: + - qcom,glymur-dp - qcom,sa8775p-dp - qcom,x1e80100-dp then: + $ref: /schemas/sound/dai-common.yaml# oneOf: - required: - aux-bus @@ -239,6 +253,7 @@ allOf: enum: # these platforms support 2 streams MST on some interfaces, # others are SST only + - qcom,glymur-dp - qcom,sc8280xp-dp - qcom,x1e80100-dp then: @@ -295,7 +310,7 @@ allOf: minItems: 6 maxItems: 8 -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml index afc1879357440c..e32056ae0f5d3e 100644 --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml @@ -21,7 +21,7 @@ properties: compatible: oneOf: - items: - - pattern: '^qcom,adreno-gmu-[67][0-9][0-9]\.[0-9]$' + - pattern: '^qcom,adreno-gmu-[6-8][0-9][0-9]\.[0-9]$' - const: qcom,adreno-gmu - items: - pattern: '^qcom,adreno-gmu-x[1-9][0-9][0-9]\.[0-9]$' @@ -299,6 +299,64 @@ allOf: required: - qcom,qmp + - if: + properties: + compatible: + contains: + const: qcom,adreno-gmu-840.1 + then: + properties: + reg: + items: + - description: Core GMU registers + reg-names: + items: + - const: gmu + clocks: + items: + - description: GPU AHB clock + - description: GMU clock + - description: GPU CX clock + - description: GPU MEMNOC clock + - description: GMU HUB clock + clock-names: + items: + - const: ahb + - const: gmu + - const: cxo + - const: memnoc + - const: hub + + - if: + properties: + compatible: + contains: + const: qcom,adreno-gmu-x285.1 + then: + properties: + reg: + items: + - description: Core GMU registers + reg-names: + items: + - const: gmu + clocks: + items: + - description: GPU AHB clock + - description: GMU clock + - description: GPU CX clock + - description: GPU MEMNOC clock + - description: GMU HUB clock + - description: GMU RSCC HUB clock + clock-names: + items: + - const: ahb + - const: gmu + - const: cxo + - const: memnoc + - const: hub + - const: rscc + - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml index 3696b083e35303..826aafdcc20be4 100644 --- a/Documentation/devicetree/bindings/display/msm/gpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml @@ -133,7 +133,6 @@ properties: For GMU attached devices a phandle to the GMU device that will control the power for the GPU. - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/msm/qcom,glymur-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,glymur-mdss.yaml new file mode 100644 index 00000000000000..2329ed96e6cb37 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,glymur-mdss.yaml @@ -0,0 +1,264 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,glymur-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Glymur Display MDSS + +maintainers: + - Abel Vesa + +description: + Glymur MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like + DPU display controller, DP interfaces, etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,glymur-mdss + + clocks: + items: + - description: Display AHB + - description: Display hf AXI + - description: Display core + + iommus: + maxItems: 1 + + interconnects: + items: + - description: Interconnect path from mdp0 port to the data bus + - description: Interconnect path from CPU to the reg bus + + interconnect-names: + items: + - const: mdp0-mem + - const: cpu-cfg + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + const: qcom,glymur-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + const: qcom,glymur-dp + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + const: qcom,glymur-dp-phy + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + #include + #include + #include + + display-subsystem@ae00000 { + compatible = "qcom,glymur-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + interrupts = ; + + clocks = <&dispcc_ahb_clk>, + <&gcc_disp_hf_axi_clk>, + <&dispcc_mdp_clk>; + clock-names = "bus", "nrt_bus", "core"; + + interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; + + resets = <&disp_cc_mdss_core_bcr>; + + power-domains = <&mdss_gdsc>; + + iommus = <&apps_smmu 0x1c00 0x2>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,glymur-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc_axi_clk>, + <&dispcc_ahb_clk>, + <&dispcc_mdp_lut_clk>, + <&dispcc_mdp_clk>, + <&dispcc_mdp_vsync_clk>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc_mdp_vsync_clk>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-514000000 { + opp-hz = /bits/ 64 <514000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + displayport-controller@ae90000 { + compatible = "qcom,glymur-dp"; + reg = <0xae90000 0x200>, + <0xae90200 0x200>, + <0xae90400 0x600>, + <0xae91000 0x400>, + <0xae91400 0x400>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + + clocks = <&dispcc_mdss_ahb_clk>, + <&dispcc_dptx0_aux_clk>, + <&dispcc_dptx0_link_clk>, + <&dispcc_dptx0_link_intf_clk>, + <&dispcc_dptx0_pixel0_clk>, + <&dispcc_dptx0_pixel1_clk>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel", + "stream_1_pixel"; + + assigned-clocks = <&dispcc_mdss_dptx0_link_clk_src>, + <&dispcc_mdss_dptx0_pixel0_clk_src>, + <&dispcc_mdss_dptx0_pixel1_clk_src>; + assigned-clock-parents = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + operating-points-v2 = <&mdss_dp0_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp0_in: endpoint { + remote-endpoint = <&mdss_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp0_out: endpoint { + }; + }; + }; + + mdss_dp0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcs8300-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcs8300-mdss.yaml new file mode 100644 index 00000000000000..e96baaae9ba9e2 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,qcs8300-mdss.yaml @@ -0,0 +1,286 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,qcs8300-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. QCS8300 Display MDSS + +maintainers: + - Yongxing Mou + +description: + QCS8300 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like + DPU display controller, DP interfaces and EDP etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,qcs8300-mdss + + clocks: + items: + - description: Display AHB + - description: Display hf AXI + - description: Display core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 3 + + interconnect-names: + maxItems: 3 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + contains: + const: qcom,qcs8300-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + contains: + const: qcom,qcs8300-dp + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + contains: + const: qcom,qcs8300-edp-phy + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + #include + #include + #include + #include + + mdss: display-subsystem@ae00000 { + compatible = "qcom,qcs8300-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&mmss_noc MASTER_MDP1 QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", + "mdp1-mem", + "cpu-cfg"; + + resets = <&dispcc_core_bcr>; + power-domains = <&dispcc_gdsc>; + + clocks = <&dispcc_ahb_clk>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc_mdp_clk>; + + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x1000 0x402>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,qcs8300-dpu", "qcom,sa8775p-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_MDP_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-575000000 { + opp-hz = /bits/ 64 <575000000>; + required-opps = <&rpmhpd_opp_turbo>; + }; + + opp-650000000 { + opp-hz = /bits/ 64 <650000000>; + required-opps = <&rpmhpd_opp_turbo_l1>; + }; + }; + }; + + mdss_dp0_phy: phy@aec2a00 { + compatible = "qcom,qcs8300-edp-phy", "qcom,sa8775p-edp-phy"; + + reg = <0x0aec2a00 0x200>, + <0x0aec2200 0xd0>, + <0x0aec2600 0xd0>, + <0x0aec2000 0x1c8>; + + clocks = <&dispcc MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc MDSS_DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", + "cfg_ahb"; + + #clock-cells = <1>; + #phy-cells = <0>; + + vdda-phy-supply = <&vreg_l1c>; + vdda-pll-supply = <&vreg_l4a>; + }; + + displayport-controller@af54000 { + compatible = "qcom,qcs8300-dp", "qcom,sa8775p-dp"; + + pinctrl-0 = <&dp_hot_plug_det>; + pinctrl-names = "default"; + + reg = <0xaf54000 0x104>, + <0xaf54200 0x0c0>, + <0xaf55000 0x770>, + <0xaf56000 0x09c>, + <0xaf57000 0x09c>, + <0xaf58000 0x09c>, + <0xaf59000 0x09c>, + <0xaf5a000 0x23c>, + <0xaf5b000 0x23c>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel", + "stream_1_pixel", + "stream_2_pixel", + "stream_3_pixel"; + assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK_SRC>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK_SRC>; + assigned-clock-parents = <&mdss_dp0_phy 0>, + <&mdss_dp0_phy 1>, + <&mdss_dp0_phy 1>, + <&mdss_dp0_phy 1>; + phys = <&mdss_dp0_phy>; + phy-names = "dp"; + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp0_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp_out: endpoint { }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6150-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6150-mdss.yaml index 9ac24f99d3ada1..46e9335f849fe8 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6150-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6150-mdss.yaml @@ -51,6 +51,14 @@ patternProperties: compatible: const: qcom,sm6150-dpu + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + contains: + const: qcom,sm6150-dp + "^dsi@[0-9a-f]+$": type: object additionalProperties: true @@ -130,35 +138,37 @@ examples: #size-cells = <0>; port@0 { - reg = <0>; - dpu_intf0_out: endpoint { - }; + reg = <0>; + + dpu_intf0_out: endpoint { + }; }; port@1 { - reg = <1>; - dpu_intf1_out: endpoint { - remote-endpoint = <&mdss_dsi0_in>; - }; + reg = <1>; + + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; }; }; mdp_opp_table: opp-table { compatible = "operating-points-v2"; - opp-19200000 { - opp-hz = /bits/ 64 <19200000>; - required-opps = <&rpmhpd_opp_low_svs>; + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmhpd_opp_low_svs>; }; - opp-25600000 { - opp-hz = /bits/ 64 <25600000>; - required-opps = <&rpmhpd_opp_svs>; + opp-256000000 { + opp-hz = /bits/ 64 <256000000>; + required-opps = <&rpmhpd_opp_svs>; }; opp-307200000 { - opp-hz = /bits/ 64 <307200000>; - required-opps = <&rpmhpd_opp_nom>; + opp-hz = /bits/ 64 <307200000>; + required-opps = <&rpmhpd_opp_nom>; }; }; }; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml index 0a46120dd86803..fe296e3186d0ec 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml @@ -13,11 +13,17 @@ $ref: /schemas/display/msm/dpu-common.yaml# properties: compatible: - enum: - - qcom,sa8775p-dpu - - qcom,sm8650-dpu - - qcom,sm8750-dpu - - qcom,x1e80100-dpu + oneOf: + - enum: + - qcom,glymur-dpu + - qcom,sa8775p-dpu + - qcom,sm8650-dpu + - qcom,sm8750-dpu + - qcom,x1e80100-dpu + - items: + - enum: + - qcom,qcs8300-dpu + - const: qcom,sa8775p-dpu reg: items: diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8750-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8750-mdss.yaml index 4151f475f3bc36..d55fda9a523e27 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8750-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8750-mdss.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm SM8750 Display MDSS maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: SM8650 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like diff --git a/Documentation/devicetree/bindings/display/panel/arm,rtsm-display.yaml b/Documentation/devicetree/bindings/display/panel/arm,rtsm-display.yaml index 4ad484f09ba3a0..fc04558fcc8ddf 100644 --- a/Documentation/devicetree/bindings/display/panel/arm,rtsm-display.yaml +++ b/Documentation/devicetree/bindings/display/panel/arm,rtsm-display.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Arm RTSM Virtual Platforms Display maintainers: - - Linus Walleij + - Linus Walleij allOf: - $ref: panel-common.yaml# diff --git a/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml index c9958f824d9ab3..b6c18e7283cd91 100644 --- a/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml +++ b/Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: ARM Versatile TFT Panels maintainers: - - Linus Walleij + - Linus Walleij description: | These panels are connected to the daughterboards found on the diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,il79900a.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,il79900a.yaml new file mode 100644 index 00000000000000..02f7fb1f16dc77 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/ilitek,il79900a.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/ilitek,il79900a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek IL79900a based MIPI-DSI panels + +maintainers: + - Langyan Ye + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - tianma,tl121bvms07-00 + - const: ilitek,il79900a + + reg: + maxItems: 1 + description: DSI virtual channel used by the panel + + enable-gpios: + maxItems: 1 + description: GPIO specifier for the enable pin + + avdd-supply: + description: Positive analog voltage supply (AVDD) + + avee-supply: + description: Negative analog voltage supply (AVEE) + + pp1800-supply: + description: 1.8V logic voltage supply + + backlight: true + +required: + - compatible + - reg + - enable-gpios + - avdd-supply + - avee-supply + - pp1800-supply + +additionalProperties: false + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "tianma,tl121bvms07-00", "ilitek,il79900a"; + reg = <0>; + enable-gpios = <&pio 25 0>; + avdd-supply = <®_avdd>; + avee-supply = <®_avee>; + pp1800-supply = <®_pp1800>; + backlight = <&backlight>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml index 44423465f6e35b..4bdc33d12306b2 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9322.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Ilitek ILI9322 TFT panel driver with SPI control bus maintainers: - - Linus Walleij + - Linus Walleij description: | This is a driver for 320x240 TFT panels, accepting a variety of input diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml index 434cc6af9c9549..d979701a00a8a5 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml @@ -20,9 +20,11 @@ properties: - bananapi,lhr050h41 - bestar,bsd1218-a101kl68 - feixin,k101-im2byl02 + - raspberrypi,dsi-5inch - raspberrypi,dsi-7inch - startek,kd050hdfia020 - tdo,tl050hdv35 + - wanchanglong,w552946aaa - wanchanglong,w552946aba - const: ilitek,ili9881c @@ -30,6 +32,7 @@ properties: maxItems: 1 backlight: true + port: true power-supply: true reset-gpios: true rotation: true diff --git a/Documentation/devicetree/bindings/display/panel/lg,ld070wx3-sl01.yaml b/Documentation/devicetree/bindings/display/panel/lg,ld070wx3-sl01.yaml new file mode 100644 index 00000000000000..0f0b9079f199bc --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/lg,ld070wx3-sl01.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/lg,ld070wx3-sl01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LG Corporation 7" WXGA TFT LCD panel + +maintainers: + - Svyatoslav Ryhel + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - const: lg,ld070wx3-sl01 + + reg: + maxItems: 1 + + vdd-supply: true + vcc-supply: true + + backlight: true + port: true + +required: + - compatible + - vdd-supply + - vcc-supply + +additionalProperties: false + +examples: + - | + #include + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "lg,ld070wx3-sl01"; + reg = <0>; + + vdd-supply = <&vdd_3v3_lcd>; + vcc-supply = <&vcc_1v8_lcd>; + + backlight = <&backlight>; + + port { + endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml index bb50fd5506c3d8..b39fd0c5a48ad1 100644 --- a/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Novatek NT35510-based display panels maintainers: - - Linus Walleij + - Linus Walleij allOf: - $ref: panel-common.yaml# diff --git a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml index 4388d5375851a2..dbc01e6408958e 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml @@ -59,6 +59,8 @@ properties: # Jenson Display BL-JT60050-01A 7" WSVGA (1024x600) color TFT LCD LVDS panel - jenson,bl-jt60050-01a - tbs,a711-panel + # Winstar WF70A8SYJHLNGA 7" WSVGA (1024x600) color TFT LCD LVDS panel + - winstar,wf70a8syjhlnga - const: panel-lvds diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml index 9b92a05791ccf9..8d668979b62dfe 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml @@ -19,6 +19,9 @@ description: | If the panel is more advanced a dedicated binding file is required. +allOf: + - $ref: panel-common.yaml# + properties: compatible: @@ -42,8 +45,6 @@ properties: - kingdisplay,kd097d04 # LG ACX467AKM-7 4.95" 1080×1920 LCD Panel - lg,acx467akm-7 - # LG Corporation 7" WXGA TFT LCD panel - - lg,ld070wx3-sl01 # LG Corporation 5" HD TFT LCD panel - lg,lh500wx1-sd03 # Lincoln LCD197 5" 1080x1920 LCD panel @@ -56,10 +57,6 @@ properties: - panasonic,vvx10f034n00 # Samsung s6e3fa7 1080x2220 based AMS559NK06 AMOLED panel - samsung,s6e3fa7-ams559nk06 - # Samsung s6e3fc2x01 1080x2340 AMOLED panel - - samsung,s6e3fc2x01 - # Samsung sofef00 1080x2280 AMOLED panel - - samsung,sofef00 # Shangai Top Display Optoelectronics 7" TL070WSH30 1024x600 TFT LCD panel - tdo,tl070wsh30 @@ -72,31 +69,12 @@ properties: reset-gpios: true port: true power-supply: true - vddio-supply: true - -allOf: - - $ref: panel-common.yaml# - - if: - properties: - compatible: - enum: - - samsung,s6e3fc2x01 - - samsung,sofef00 - then: - properties: - power-supply: false - required: - - vddio-supply - else: - properties: - vddio-supply: false - required: - - power-supply additionalProperties: false required: - compatible + - power-supply - reg examples: diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 2017428d8828e5..24e277b190941e 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -184,6 +184,8 @@ properties: - innolux,n156bge-l21 # Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel - innolux,zj070na-01p + # JuTouch Technology Co.. 10" JT101TM023 WXGA (1280 x 800) LVDS panel + - jutouch,jt101tm023 # Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel - koe,tx14d24vm1bpa # Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel @@ -268,6 +270,8 @@ properties: - qiaodian,qd43003c0-40 # Shenzhen QiShenglong Industrialist Co., Ltd. Gopher 2b 4.3" 480(RGB)x272 TFT LCD panel - qishenglong,gopher2b-lcd + # Raystar Optronics, Inc. RFF500F-AWH-DNN 5.0" TFT 840x480 + - raystar,rff500f-awh-dnn # Rocktech Displays Ltd. RK101II01D-CT 10.1" TFT 1280x800 - rocktech,rk101ii01d-ct # Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel @@ -276,6 +280,8 @@ properties: - rocktech,rk043fn48h # Samsung Electronics 10.1" WXGA (1280x800) TFT LCD panel - samsung,ltl101al01 + # Samsung Electronics 10.6" FWXGA (1366x768) TFT LCD panel + - samsung,ltl106al01 # Samsung Electronics 10.1" WSVGA TFT LCD panel - samsung,ltn101nt05 # Satoz SAT050AT40H12R2 5.0" WVGA TFT LCD panel diff --git a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml index aea69b84ca5d86..8c97744587773a 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml @@ -41,7 +41,6 @@ description: | | | | v | | +-------+----------+-------------------------------------+----------+ - The following is the panel timings shown with time on the x-axis. This matches the timing diagrams often found in data sheets. diff --git a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml index 04f86e0cbac91f..69403730158336 100644 --- a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml +++ b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml @@ -9,6 +9,9 @@ title: Ronbo RB070D30 DSI Display Panel maintainers: - Maxime Ripard +allOf: + - $ref: panel-common.yaml# + properties: compatible: const: ronbo,rb070d30 @@ -20,10 +23,6 @@ properties: description: GPIO used for the power pin maxItems: 1 - reset-gpios: - description: GPIO used for the reset pin - maxItems: 1 - shlr-gpios: description: GPIO used for the shlr pin (horizontal flip) maxItems: 1 @@ -35,10 +34,6 @@ properties: vcc-lcd-supply: description: Power regulator - backlight: - description: Backlight used by the panel - $ref: /schemas/types.yaml#/definitions/phandle - required: - compatible - power-gpios @@ -47,5 +42,6 @@ required: - shlr-gpios - updn-gpios - vcc-lcd-supply + - port -additionalProperties: false +unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml b/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml index ccb574caed2838..f1723e9102525d 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml @@ -33,6 +33,8 @@ properties: - samsung,atna45dc02 # Samsung 15.6" 3K (2880x1620 pixels) eDP AMOLED panel - samsung,atna56ac03 + # Samsung 16.0" 3K (2880x1800 pixels) eDP AMOLED panel + - samsung,atna60cl08 - const: samsung,atna33xc20 enable-gpios: true diff --git a/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml index 7ce8540551f9eb..74c2a617c2ff30 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml @@ -11,7 +11,7 @@ description: The LMS380KF01 is a 480x800 DPI display panel from Samsung Mobile used with internal or external backlight control. maintainers: - - Linus Walleij + - Linus Walleij allOf: - $ref: panel-common.yaml# diff --git a/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml b/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml index 9363032883de45..4cecf502a1506d 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml @@ -10,7 +10,7 @@ description: The datasheet claims this is based around a display controller named DB7430 with a separate backlight controller. maintainers: - - Linus Walleij + - Linus Walleij allOf: - $ref: panel-common.yaml# diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml index 2af5bc47323f50..0872476a8ac9ae 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6d16d0.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S6D16D0 4" 864x480 AMOLED panel maintainers: - - Linus Walleij + - Linus Walleij allOf: - $ref: panel-common.yaml# diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e3fc2x01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e3fc2x01.yaml new file mode 100644 index 00000000000000..d48354fb52ea0d --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e3fc2x01.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,s6e3fc2x01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S6E3FC2X01 AMOLED DDIC + +description: The S6E3FC2X01 is display driver IC with connected panel. + +maintainers: + - David Heidelberg + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + # Samsung 6.41 inch, 1080x2340 pixels, 19.5:9 ratio + - samsung,s6e3fc2x01-ams641rw + - const: samsung,s6e3fc2x01 + + reg: + maxItems: 1 + + reset-gpios: true + + port: true + + vddio-supply: + description: VDD regulator + + vci-supply: + description: VCI regulator + + poc-supply: + description: POC regulator + +required: + - compatible + - reset-gpios + - vddio-supply + - vci-supply + - poc-supply + +unevaluatedProperties: false + +examples: + - | + #include + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,s6e3fc2x01-ams641rw", "samsung,s6e3fc2x01"; + reg = <0>; + + vddio-supply = <&vreg_l14a_1p88>; + vci-supply = <&s2dos05_buck1>; + poc-supply = <&s2dos05_ldo1>; + + te-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>; + pinctrl-1 = <&sde_dsi_suspend &sde_te_active_sleep>; + pinctrl-names = "default", "sleep"; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/samsung,sofef00.yaml b/Documentation/devicetree/bindings/display/panel/samsung,sofef00.yaml new file mode 100644 index 00000000000000..eeee3cac72e31a --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,sofef00.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,sofef00.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung SOFEF00 AMOLED DDIC + +description: The SOFEF00 is display driver IC with connected panel. + +maintainers: + - David Heidelberg + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + # Samsung 6.01 inch, 1080x2160 pixels, 18:9 ratio + - samsung,sofef00-ams601nt22 + # Samsung 6.28 inch, 1080x2280 pixels, 19:9 ratio + - samsung,sofef00-ams628nw01 + - const: samsung,sofef00 + + reg: + maxItems: 1 + + poc-supply: + description: POC regulator + + vci-supply: + description: VCI regulator + + vddio-supply: + description: VDD regulator + +required: + - compatible + - reset-gpios + - poc-supply + - vci-supply + - vddio-supply + +unevaluatedProperties: false + +examples: + - | + #include + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,sofef00-ams628nw01", "samsung,sofef00"; + reg = <0>; + + vddio-supply = <&vreg_l14a_1p88>; + vci-supply = <&s2dos05_buck1>; + poc-supply = <&s2dos05_ldo1>; + + te-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&panel_active>; + pinctrl-1 = <&panel_suspend>; + pinctrl-names = "default", "sleep"; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq079l1sx01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,lq079l1sx01.yaml new file mode 100644 index 00000000000000..08a35ebbbb3cbe --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sharp,lq079l1sx01.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sharp,lq079l1sx01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sharp Microelectronics 7.9" WQXGA TFT LCD panel + +maintainers: + - Svyatoslav Ryhel + +description: > + This panel requires a dual-channel DSI host to operate and it supports + only left-right split mode, where each channel drives the left or right + half of the screen and only video mode. + + Each of the DSI channels controls a separate DSI peripheral. + The peripheral driven by the first link (DSI-LINK1), left one, is + considered the primary peripheral and controls the device. + +allOf: + - $ref: panel-common-dual.yaml# + +properties: + compatible: + const: sharp,lq079l1sx01 + + reg: + maxItems: 1 + + avdd-supply: + description: regulator that supplies the analog voltage + + vddio-supply: + description: regulator that supplies the I/O voltage + + vsp-supply: + description: positive boost supply regulator + + vsn-supply: + description: negative boost supply regulator + + reset-gpios: + maxItems: 1 + + backlight: true + ports: true + +required: + - compatible + - reg + - avdd-supply + - vddio-supply + - ports + +additionalProperties: false + +examples: + - | + #include + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "sharp,lq079l1sx01"; + reg = <0>; + + reset-gpios = <&gpio 59 GPIO_ACTIVE_LOW>; + + avdd-supply = <&avdd_lcd>; + vddio-supply = <&vdd_lcd_io>; + vsp-supply = <&vsp_5v5_lcd>; + vsn-supply = <&vsn_5v5_lcd>; + + backlight = <&backlight>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + panel_in0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + panel_in1: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml index fd778a20f76099..64fa086730b05a 100644 --- a/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml +++ b/Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml @@ -12,7 +12,7 @@ description: The Sony ACX424AKP and ACX424AKM are panels built around AKP. maintainers: - - Linus Walleij + - Linus Walleij allOf: - $ref: panel-common.yaml# diff --git a/Documentation/devicetree/bindings/display/panel/synaptics,td4300-panel.yaml b/Documentation/devicetree/bindings/display/panel/synaptics,td4300-panel.yaml new file mode 100644 index 00000000000000..152d94367130e9 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/synaptics,td4300-panel.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/synaptics,td4300-panel.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synaptics TDDI Display Panel Controller + +maintainers: + - Kaustabh Chakraborty + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + enum: + - syna,td4101-panel + - syna,td4300-panel + + reg: + maxItems: 1 + + vio-supply: + description: core I/O voltage supply + + vsn-supply: + description: negative voltage supply for analog circuits + + vsp-supply: + description: positive voltage supply for analog circuits + + backlight-gpios: + maxItems: 1 + description: backlight enable GPIO + + reset-gpios: true + width-mm: true + height-mm: true + panel-timing: true + +required: + - compatible + - reg + - width-mm + - height-mm + - panel-timing + +additionalProperties: false + +examples: + - | + #include + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "syna,td4300-panel"; + reg = <0>; + + vio-supply = <&panel_vio_reg>; + vsn-supply = <&panel_vsn_reg>; + vsp-supply = <&panel_vsp_reg>; + + backlight-gpios = <&gpd3 5 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpd3 4 GPIO_ACTIVE_LOW>; + + width-mm = <68>; + height-mm = <121>; + + panel-timing { + clock-frequency = <144389520>; + + hactive = <1080>; + hsync-len = <4>; + hfront-porch = <120>; + hback-porch = <32>; + + vactive = <1920>; + vsync-len = <2>; + vfront-porch = <21>; + vback-porch = <4>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/ti,nspire.yaml b/Documentation/devicetree/bindings/display/panel/ti,nspire.yaml index 5c5a3b519e314c..fc722f706ad71b 100644 --- a/Documentation/devicetree/bindings/display/panel/ti,nspire.yaml +++ b/Documentation/devicetree/bindings/display/panel/ti,nspire.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments NSPIRE Display Panels maintainers: - - Linus Walleij + - Linus Walleij allOf: - $ref: panel-common.yaml# diff --git a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml index 59a373728e628d..e5f3108cde5a6d 100644 --- a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml +++ b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: TPO TPG110 Panel maintainers: - - Linus Walleij + - Linus Walleij - Thierry Reding description: |+ @@ -38,7 +38,6 @@ description: |+ The serial protocol has line names that resemble I2C but the protocol is not I2C but 3WIRE SPI. - allOf: - $ref: panel-common.yaml# - $ref: /schemas/spi/spi-peripheral-props.yaml# diff --git a/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml index 1e32d14b6edb79..2cc66dcef870a1 100644 --- a/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml +++ b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml @@ -25,6 +25,9 @@ properties: - enum: - renesas,r9a07g054-du # RZ/V2L - const: renesas,r9a07g044-du # RZ/G2L fallback + - items: + - const: renesas,r9a09g056-du # RZ/V2N + - const: renesas,r9a09g057-du # RZ/V2H(P) fallback reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-dp.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-dp.yaml index a8a00871799724..6345f0132d43db 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-dp.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-dp.yaml @@ -125,7 +125,6 @@ examples: power-domains = <&power RK3588_PD_VO0>; #sound-dai-cells = <0>; - ports { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml index c59df3c1a3f78a..632b48bfabb94d 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml @@ -17,6 +17,7 @@ properties: - rockchip,px30-mipi-dsi - rockchip,rk3128-mipi-dsi - rockchip,rk3288-mipi-dsi + - rockchip,rk3368-mipi-dsi - rockchip,rk3399-mipi-dsi - rockchip,rk3568-mipi-dsi - rockchip,rv1126-mipi-dsi @@ -73,6 +74,7 @@ allOf: enum: - rockchip,px30-mipi-dsi - rockchip,rk3128-mipi-dsi + - rockchip,rk3368-mipi-dsi - rockchip,rk3568-mipi-dsi - rockchip,rv1126-mipi-dsi diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml index 96b4b088eebee7..d649808c59da8a 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml @@ -113,6 +113,14 @@ properties: description: Additional HDMI QP related data is accessed through VO GRF regs. + frl-enable-gpios: + description: + Optional GPIO line to be asserted when operating in HDMI 2.1 FRL mode and + deasserted for HDMI 1.4/2.0 TMDS. It can be used to control external + voltage bias for HDMI data lines. When not present the HDMI encoder will + operate in TMDS mode only. + maxItems: 1 + required: - compatible - reg @@ -132,8 +140,10 @@ unevaluatedProperties: false examples: - | #include + #include #include #include + #include #include #include @@ -164,6 +174,7 @@ examples: rockchip,grf = <&sys_grf>; rockchip,vo-grf = <&vo1_grf>; #sound-dai-cells = <0>; + frl-enable-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_LOW>; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml index 296500f9da05e2..45ffdebc9d86bf 100644 --- a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml +++ b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml @@ -181,7 +181,6 @@ allOf: required: - amlogic,pipeline - additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/display/ste,mcde.yaml b/Documentation/devicetree/bindings/display/ste,mcde.yaml index 564ea845c82e05..7a12d0b817e68a 100644 --- a/Documentation/devicetree/bindings/display/ste,mcde.yaml +++ b/Documentation/devicetree/bindings/display/ste,mcde.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: ST-Ericsson Multi Channel Display Engine MCDE maintainers: - - Linus Walleij + - Linus Walleij properties: compatible: diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-tsec.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-tsec.yaml new file mode 100644 index 00000000000000..2c4d519a1bb7a7 --- /dev/null +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-tsec.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra114-tsec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Security co-processor + +maintainers: + - Svyatoslav Ryhel + - Thierry Reding + +description: Tegra Security co-processor, an embedded security processor used + mainly to manage the HDCP encryption and keys on the HDMI link. + +properties: + compatible: + oneOf: + - enum: + - nvidia,tegra114-tsec + - nvidia,tegra124-tsec + - nvidia,tegra210-tsec + + - items: + - const: nvidia,tegra132-tsec + - const: nvidia,tegra124-tsec + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + iommus: + maxItems: 1 + + operating-points-v2: true + + power-domains: + maxItems: 1 + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - resets + +examples: + - | + #include + #include + + tsec@54500000 { + compatible = "nvidia,tegra114-tsec"; + reg = <0x54500000 0x00040000>; + interrupts = ; + clocks = <&tegra_car TEGRA114_CLK_TSEC>; + resets = <&tegra_car TEGRA114_CLK_TSEC>; + }; diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-csi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-csi.yaml new file mode 100644 index 00000000000000..a1aea9590769f4 --- /dev/null +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-csi.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/tegra/nvidia,tegra20-csi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra20 CSI controller + +maintainers: + - Svyatoslav Ryhel + +properties: + compatible: + enum: + - nvidia,tegra20-csi + - nvidia,tegra30-csi + + reg: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: module clock + - description: PAD A clock + - description: PAD B clock + + clock-names: + items: + - const: csi + - const: csia-pad + - const: csib-pad + + avdd-dsi-csi-supply: + description: DSI/CSI power supply. Must supply 1.2 V. + + power-domains: + maxItems: 1 + + "#nvidia,mipi-calibrate-cells": + description: + The number of cells in a MIPI calibration specifier. Should be 1. + The single cell specifies an id of the pad that need to be + calibrated for a given device. Valid pad ids for receiver would be + 0 for CSI-A; 1 for CSI-B; 2 for DSI-A and 3 for DSI-B. + $ref: /schemas/types.yaml#/definitions/uint32 + const: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^channel@[0-1]$": + type: object + description: channel 0 represents CSI-A and 1 represents CSI-B + additionalProperties: false + + properties: + reg: + maximum: 1 + + nvidia,mipi-calibrate: + description: Should contain a phandle and a specifier specifying + which pad is used by this CSI channel and needs to be calibrated. + $ref: /schemas/types.yaml#/definitions/phandle-array + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: port receiving the video stream from the sensor + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + required: + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: port sending the video stream to the VI + + required: + - reg + - "#address-cells" + - "#size-cells" + - port@0 + - port@1 + +allOf: + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra20-csi + then: + properties: + clocks: + maxItems: 1 + + clock-names: false + + - if: + properties: + compatible: + contains: + enum: + - nvidia,tegra30-csi + then: + properties: + clocks: + minItems: 3 + + clock-names: + minItems: 3 + +additionalProperties: false + +required: + - compatible + - reg + - clocks + - power-domains + - "#address-cells" + - "#size-cells" + +# see nvidia,tegra20-vi.yaml for an example diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-epp.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-epp.yaml index 3c095a5491fec8..334f5531b24330 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-epp.yaml +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-epp.yaml @@ -15,10 +15,16 @@ properties: pattern: "^epp@[0-9a-f]+$" compatible: - enum: - - nvidia,tegra20-epp - - nvidia,tegra30-epp - - nvidia,tegra114-epp + oneOf: + - enum: + - nvidia,tegra20-epp + - nvidia,tegra30-epp + - nvidia,tegra114-epp + - nvidia,tegra124-epp + + - items: + - const: nvidia,tegra132-epp + - const: nvidia,tegra124-epp reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-isp.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-isp.yaml index 3bc3b22e98e1de..ee25b5e6f1a245 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-isp.yaml +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-isp.yaml @@ -12,10 +12,17 @@ maintainers: properties: compatible: - enum: - - nvidia,tegra20-isp - - nvidia,tegra30-isp - - nvidia,tegra210-isp + oneOf: + - enum: + - nvidia,tegra20-isp + - nvidia,tegra30-isp + - nvidia,tegra114-isp + - nvidia,tegra124-isp + - nvidia,tegra210-isp + + - items: + - const: nvidia,tegra132-isp + - const: nvidia,tegra124-isp reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-mpe.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-mpe.yaml index 2cd3e60cd0a8b0..36b76fa8f525be 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-mpe.yaml +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-mpe.yaml @@ -12,13 +12,21 @@ maintainers: properties: $nodename: - pattern: "^mpe@[0-9a-f]+$" + oneOf: + - pattern: "^mpe@[0-9a-f]+$" + - pattern: "^msenc@[0-9a-f]+$" compatible: - enum: - - nvidia,tegra20-mpe - - nvidia,tegra30-mpe - - nvidia,tegra114-mpe + oneOf: + - enum: + - nvidia,tegra20-mpe + - nvidia,tegra30-mpe + - nvidia,tegra114-msenc + - nvidia,tegra124-msenc + + - items: + - const: nvidia,tegra132-msenc + - const: nvidia,tegra124-msenc reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml index 361e9cae6896c1..38fcee91211e8c 100644 --- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml +++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml @@ -84,8 +84,7 @@ properties: maxItems: 1 description: phandle to the associated power domain - dma-coherent: - type: boolean + dma-coherent: true ports: $ref: /schemas/graph.yaml#/properties/ports diff --git a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml index fad7cba58d39ac..65ae8a1c399862 100644 --- a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml +++ b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml @@ -103,8 +103,7 @@ properties: maxItems: 1 description: phandle to the associated power domain - dma-coherent: - type: boolean + dma-coherent: true ports: $ref: /schemas/graph.yaml#/properties/ports diff --git a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml index 0f2501f72ccace..c3e14eb6cfff93 100644 --- a/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml +++ b/Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml @@ -29,7 +29,10 @@ properties: - const: allwinner,sun8i-r40-dma - const: allwinner,sun50i-a64-dma - items: - - const: allwinner,sun50i-h616-dma + - enum: + - allwinner,sun50i-h616-dma + - allwinner,sun55i-a523-dma + - allwinner,sun55i-a523-mcu-dma - const: allwinner,sun50i-a100-dma reg: diff --git a/Documentation/devicetree/bindings/dma/apm,xgene-storm-dma.yaml b/Documentation/devicetree/bindings/dma/apm,xgene-storm-dma.yaml new file mode 100644 index 00000000000000..9ca5f78487856d --- /dev/null +++ b/Documentation/devicetree/bindings/dma/apm,xgene-storm-dma.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/dma/apm,xgene-storm-dma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: APM X-Gene Storm SoC DMA + +maintainers: + - Khuong Dinh + +properties: + compatible: + const: apm,xgene-storm-dma + + reg: + items: + - description: DMA control and status registers + - description: Descriptor ring control and status registers + - description: Descriptor ring command registers + - description: SoC efuse registers + + interrupts: + items: + - description: DMA error reporting interrupt + - description: DMA channel 0 completion interrupt + - description: DMA channel 1 completion interrupt + - description: DMA channel 2 completion interrupt + - description: DMA channel 3 completion interrupt + + clocks: + maxItems: 1 + + dma-coherent: true + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + dma@1f270000 { + compatible = "apm,xgene-storm-dma"; + reg = <0x1f270000 0x10000>, + <0x1f200000 0x10000>, + <0x1b000000 0x400000>, + <0x1054a000 0x100>; + interrupts = <0x0 0x82 0x4>, + <0x0 0xb8 0x4>, + <0x0 0xb9 0x4>, + <0x0 0xba 0x4>, + <0x0 0xbb 0x4>; + dma-coherent; + clocks = <&dmaclk 0>; + }; diff --git a/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt b/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt deleted file mode 100644 index c53e0b08032fe7..00000000000000 --- a/Documentation/devicetree/bindings/dma/apm-xgene-dma.txt +++ /dev/null @@ -1,47 +0,0 @@ -Applied Micro X-Gene SoC DMA nodes - -DMA nodes are defined to describe on-chip DMA interfaces in -APM X-Gene SoC. - -Required properties for DMA interfaces: -- compatible: Should be "apm,xgene-dma". -- device_type: set to "dma". -- reg: Address and length of the register set for the device. - It contains the information of registers in the following order: - 1st - DMA control and status register address space. - 2nd - Descriptor ring control and status register address space. - 3rd - Descriptor ring command register address space. - 4th - Soc efuse register address space. -- interrupts: DMA has 5 interrupts sources. 1st interrupt is - DMA error reporting interrupt. 2nd, 3rd, 4th and 5th interrupts - are completion interrupts for each DMA channels. -- clocks: Reference to the clock entry. - -Optional properties: -- dma-coherent : Present if dma operations are coherent - -Example: - dmaclk: dmaclk@1f27c000 { - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - reg = <0x0 0x1f27c000 0x0 0x1000>; - reg-names = "csr-reg"; - clock-output-names = "dmaclk"; - }; - - dma: dma@1f270000 { - compatible = "apm,xgene-storm-dma"; - device_type = "dma"; - reg = <0x0 0x1f270000 0x0 0x10000>, - <0x0 0x1f200000 0x0 0x10000>, - <0x0 0x1b000000 0x0 0x400000>, - <0x0 0x1054a000 0x0 0x100>; - interrupts = <0x0 0x82 0x4>, - <0x0 0xb8 0x4>, - <0x0 0xb9 0x4>, - <0x0 0xba 0x4>, - <0x0 0xbb 0x4>; - dma-coherent; - clocks = <&dmaclk 0>; - }; diff --git a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml index c21a4f073f6c8f..18c0a7c18bc856 100644 --- a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml +++ b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml @@ -22,7 +22,6 @@ properties: - renesas,r9a06g032-dma - const: renesas,rzn1-dma - "#dma-cells": minimum: 3 maximum: 4 diff --git a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml index 935735a59afd47..a393a33c8908f3 100644 --- a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml +++ b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml @@ -42,6 +42,9 @@ properties: minItems: 1 maxItems: 8 + iommus: + maxItems: 1 + clocks: items: - description: Bus Clock diff --git a/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml index 7b94d24d5ef42e..607da11e7baa93 100644 --- a/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml +++ b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: ST-Ericsson DMA40 DMA Engine maintainers: - - Linus Walleij + - Linus Walleij allOf: - $ref: dma-controller.yaml# @@ -120,7 +120,6 @@ properties: - description: LCPA memory base, deprecated, use eSRAM pool instead deprecated: true - reg-names: oneOf: - items: diff --git a/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma.yaml b/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma.yaml index 11a289f1d5059d..59890335419622 100644 --- a/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma.yaml +++ b/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma.yaml @@ -48,7 +48,6 @@ description: | by transfer completion. This must only be used on channels managing transfers for STM32 USART/UART. - maintainers: - Amelie Delaunay diff --git a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml index b5399c65a7315b..2da86037ad79ee 100644 --- a/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml +++ b/Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dma-1.0.yaml @@ -59,8 +59,7 @@ properties: power-domains: maxItems: 1 - dma-coherent: - description: present if dma operations are coherent + dma-coherent: true required: - "#dma-cells" diff --git a/Documentation/devicetree/bindings/dts-coding-style.rst b/Documentation/devicetree/bindings/dts-coding-style.rst index 202acac0507ab1..4a02ea60cbbe27 100644 --- a/Documentation/devicetree/bindings/dts-coding-style.rst +++ b/Documentation/devicetree/bindings/dts-coding-style.rst @@ -120,7 +120,8 @@ The following order of properties in device nodes is preferred: 4. Standard/common properties (defined by common bindings, e.g. without vendor-prefixes) 5. Vendor-specific properties -6. "status" (if applicable) +6. "status" (if applicable), preceded by a blank line if there is content + before the property 7. Child nodes, where each node is preceded with a blank line The "status" property is by default "okay", thus it can be omitted. @@ -150,6 +151,7 @@ Example:: #address-cells = <1>; #size-cells = <1>; vendor,custom-property = <2>; + status = "disabled"; child_node: child-class@100 { @@ -165,6 +167,7 @@ Example:: vdd-1v8-supply = <&board_vreg4>; vdd-3v3-supply = <&board_vreg2>; vdd-12v-supply = <&board_vreg3>; + status = "okay"; } diff --git a/Documentation/devicetree/bindings/edac/altr,socfpga-ecc-manager.yaml b/Documentation/devicetree/bindings/edac/altr,socfpga-ecc-manager.yaml index 3d787dea0f1476..136e8fccd429a5 100644 --- a/Documentation/devicetree/bindings/edac/altr,socfpga-ecc-manager.yaml +++ b/Documentation/devicetree/bindings/edac/altr,socfpga-ecc-manager.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Altera SoCFPGA ECC Manager maintainers: - - Matthew Gerlach + - Niravkumar L Rabara description: This binding describes the device tree nodes required for the Altera SoCFPGA diff --git a/Documentation/devicetree/bindings/edac/apm,xgene-edac.yaml b/Documentation/devicetree/bindings/edac/apm,xgene-edac.yaml index 9afc78254cc0c8..9637df7af3c87f 100644 --- a/Documentation/devicetree/bindings/edac/apm,xgene-edac.yaml +++ b/Documentation/devicetree/bindings/edac/apm,xgene-edac.yaml @@ -97,7 +97,6 @@ patternProperties: - reg - memory-controller - '^edacpmd@': description: PMD subnode type: object diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml index 50af7ccf6e21ab..c212826347803e 100644 --- a/Documentation/devicetree/bindings/eeprom/at24.yaml +++ b/Documentation/devicetree/bindings/eeprom/at24.yaml @@ -131,6 +131,7 @@ properties: - const: atmel,24c32 - items: - enum: + - belling,bl24s64 - onnn,n24s64b - puya,p24c64f - const: atmel,24c64 diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml index 00e0f07b44f843..e1599ce1091659 100644 --- a/Documentation/devicetree/bindings/eeprom/at25.yaml +++ b/Documentation/devicetree/bindings/eeprom/at25.yaml @@ -25,6 +25,7 @@ properties: oneOf: - items: - enum: + - anvo,anv32c81w - anvo,anv32e61w - atmel,at25256B - fujitsu,mb85rs1mt diff --git a/Documentation/devicetree/bindings/embedded-controller/traverse,ten64-controller.yaml b/Documentation/devicetree/bindings/embedded-controller/traverse,ten64-controller.yaml new file mode 100644 index 00000000000000..08d02c4df87327 --- /dev/null +++ b/Documentation/devicetree/bindings/embedded-controller/traverse,ten64-controller.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/embedded-controller/traverse,ten64-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Traverse Ten64 board microcontroller + +maintainers: + - Mathew McBride + +description: | + The board microcontroller on the Ten64 board family is responsible for + management of power sources on the board, as well as signalling the SoC + to power on and reset. + +properties: + compatible: + const: traverse,ten64-controller + + reg: + const: 0x7e + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + board-controller@7e { + compatible = "traverse,ten64-controller"; + reg = <0x7e>; + }; + }; diff --git a/Documentation/devicetree/bindings/extcon/fcs,fsa880.yaml b/Documentation/devicetree/bindings/extcon/fcs,fsa880.yaml index ef6a246a133781..bff3fd5f7f4ebf 100644 --- a/Documentation/devicetree/bindings/extcon/fcs,fsa880.yaml +++ b/Documentation/devicetree/bindings/extcon/fcs,fsa880.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Fairchild Semiconductor FSA880, FSA9480 and compatibles maintainers: - - Linus Walleij + - Linus Walleij description: The FSA880 and FSA9480 are USB port accessory detectors and switches. diff --git a/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml b/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml index 9785aac3b5f349..d3bca6088d1284 100644 --- a/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml +++ b/Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml @@ -24,6 +24,15 @@ properties: compatible: const: google,gs101-acpm-ipc + "#clock-cells": + const: 1 + description: + Clocks that are variable and index based. These clocks don't provide + an entire range of values between the limits but only discrete points + within the range. The firmware also manages the voltage scaling + appropriately with the clock scaling. The argument is the ID of the + clock contained by the firmware messages. + mboxes: maxItems: 1 @@ -45,6 +54,7 @@ properties: required: - compatible + - "#clock-cells" - mboxes - shmem @@ -56,6 +66,7 @@ examples: power-management { compatible = "google,gs101-acpm-ipc"; + #clock-cells = <1>; mboxes = <&ap2apm_mailbox>; shmem = <&apm_sram>; diff --git a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml index 50f1f08744a1da..4d66ef4835223a 100644 --- a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml +++ b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Intel IXP4xx Network Processing Engine maintainers: - - Linus Walleij + - Linus Walleij description: | On the IXP4xx SoCs, the Network Processing Engine (NPE) is a small diff --git a/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.yaml b/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.yaml index fac1e955852e4f..b42cfa78b28b55 100644 --- a/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.yaml +++ b/Documentation/devicetree/bindings/firmware/intel,stratix10-svc.yaml @@ -34,6 +34,7 @@ properties: enum: - intel,stratix10-svc - intel,agilex-svc + - intel,agilex5-svc method: description: | @@ -54,6 +55,9 @@ properties: reserved memory region for the service layer driver to communicate with the secure device manager. + iommus: + maxItems: 1 + fpga-mgr: $ref: /schemas/fpga/intel,stratix10-soc-fpga-mgr.yaml description: Optional child node for fpga manager to perform fabric configuration. @@ -63,6 +67,17 @@ required: - method - memory-region +allOf: + - if: + properties: + compatible: + contains: + enum: + - intel,agilex5-svc + then: + required: + - iommus + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml index ef97faac7e47c1..d66459f1d84e4d 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml @@ -23,6 +23,7 @@ properties: - enum: - qcom,scm-apq8064 - qcom,scm-apq8084 + - qcom,scm-glymur - qcom,scm-ipq4019 - qcom,scm-ipq5018 - qcom,scm-ipq5332 @@ -31,6 +32,7 @@ properties: - qcom,scm-ipq806x - qcom,scm-ipq8074 - qcom,scm-ipq9574 + - qcom,scm-kaanapali - qcom,scm-mdm9607 - qcom,scm-milos - qcom,scm-msm8226 @@ -202,6 +204,7 @@ allOf: compatible: contains: enum: + - qcom,scm-kaanapali - qcom,scm-milos - qcom,scm-sm8450 - qcom,scm-sm8550 diff --git a/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml b/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml index 3faae32366656c..c6fc1d6e25da75 100644 --- a/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml +++ b/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml @@ -23,7 +23,6 @@ description: | The authoritative guest-side hardware interface documentation to the fw_cfg device can be found in "docs/specs/fw_cfg.txt" in the QEMU source tree. - properties: compatible: const: qemu,fw-cfg-mmio diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.yaml b/Documentation/devicetree/bindings/fpga/fpga-region.yaml index 7d2d3b7aa4b7e1..55acf0ecfa3fdd 100644 --- a/Documentation/devicetree/bindings/fpga/fpga-region.yaml +++ b/Documentation/devicetree/bindings/fpga/fpga-region.yaml @@ -18,7 +18,6 @@ description: | - Supported Use Models - Constraints - Introduction ============ @@ -31,7 +30,6 @@ description: | document isn't a replacement for any manufacturers specifications for FPGA usage. - Terminology =========== @@ -108,7 +106,6 @@ description: | a soft logic bridge (Bridge0-2) in the FPGA. The contents of each PRR can be reprogrammed independently while the rest of the system continues to function. - Sequence ======== @@ -124,7 +121,6 @@ description: | When the overlay is removed, the child nodes will be removed and the FPGA Region will disable the bridges. - FPGA Region =========== @@ -170,7 +166,6 @@ description: | hardware bridges remain enabled. The PR regions' bridges will be FPGA bridges within the static image of the FPGA. - Supported Use Models ==================== @@ -215,9 +210,9 @@ description: | FPGA Bridges that exist on the FPGA fabric prior to the partial reconfiguration. -- - [1] www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/ug/ug_partrecon.pdf + [1] https://www.intel.com/programmable/technical-pdfs/683404.pdf [2] tspace.library.utoronto.ca/bitstream/1807/67932/1/Byma_Stuart_A_201411_MAS_thesis.pdf - [3] https://www.xilinx.com/support/documentation/sw_manuals/xilinx14_1/ug702.pdf + [3] https://docs.amd.com/v/u/en-US/ug702 properties: $nodename: diff --git a/Documentation/devicetree/bindings/fpga/lattice,ice40-fpga-mgr.yaml b/Documentation/devicetree/bindings/fpga/lattice,ice40-fpga-mgr.yaml new file mode 100644 index 00000000000000..5121c612078579 --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/lattice,ice40-fpga-mgr.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/fpga/lattice,ice40-fpga-mgr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lattice iCE40 FPGA Manager + +maintainers: + - Joel Holdsworth + +properties: + compatible: + const: lattice,ice40-fpga-mgr + + reg: + maxItems: 1 + + spi-max-frequency: + minimum: 1000000 + maximum: 25000000 + + cdone-gpios: + maxItems: 1 + description: GPIO input connected to CDONE pin + + reset-gpios: + maxItems: 1 + description: + Active-low GPIO output connected to CRESET_B pin. Note that unless the + GPIO is held low during startup, the FPGA will enter Master SPI mode and + drive SCK with a clock signal potentially jamming other devices on the bus + until the firmware is loaded. + +required: + - compatible + - reg + - spi-max-frequency + - cdone-gpios + - reset-gpios + +additionalProperties: false + +examples: + - | + #include + + spi { + #address-cells = <1>; + #size-cells = <0>; + + fpga@0 { + compatible = "lattice,ice40-fpga-mgr"; + reg = <0>; + spi-max-frequency = <1000000>; + cdone-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt b/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt deleted file mode 100644 index 4dc412437b086d..00000000000000 --- a/Documentation/devicetree/bindings/fpga/lattice-ice40-fpga-mgr.txt +++ /dev/null @@ -1,21 +0,0 @@ -Lattice iCE40 FPGA Manager - -Required properties: -- compatible: Should contain "lattice,ice40-fpga-mgr" -- reg: SPI chip select -- spi-max-frequency: Maximum SPI frequency (>=1000000, <=25000000) -- cdone-gpios: GPIO input connected to CDONE pin -- reset-gpios: Active-low GPIO output connected to CRESET_B pin. Note - that unless the GPIO is held low during startup, the - FPGA will enter Master SPI mode and drive SCK with a - clock signal potentially jamming other devices on the - bus until the firmware is loaded. - -Example: - fpga: fpga@0 { - compatible = "lattice,ice40-fpga-mgr"; - reg = <0>; - spi-max-frequency = <1000000>; - cdone-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio 22 GPIO_ACTIVE_LOW>; - }; diff --git a/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml b/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml index 089166089498d1..c34b86bb7f6ff9 100644 --- a/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml +++ b/Documentation/devicetree/bindings/gnss/brcm,bcm4751.yaml @@ -8,7 +8,7 @@ title: Broadcom BCM4751 family GNSS Receiver maintainers: - Johan Hovold - - Linus Walleij + - Linus Walleij description: Broadcom GPS chips can be used over the UART or I2C bus. The UART diff --git a/Documentation/devicetree/bindings/gnss/gnss-common.yaml b/Documentation/devicetree/bindings/gnss/gnss-common.yaml index d4430d2d6855c9..354c0524089cf9 100644 --- a/Documentation/devicetree/bindings/gnss/gnss-common.yaml +++ b/Documentation/devicetree/bindings/gnss/gnss-common.yaml @@ -31,8 +31,7 @@ properties: maxItems: 1 timepulse-gpios: - description: When a timepulse is provided to the GNSS device using a - GPIO line, this is used. + description: Timepulse signal maxItems: 1 additionalProperties: true diff --git a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml index c0c2bfaa606fb0..b349b7bc041238 100644 --- a/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml +++ b/Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/gnss/u-blox,neo-6m.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: U-blox GNSS Receiver +title: u-blox GNSS receiver allOf: - $ref: gnss-common.yaml# @@ -14,7 +14,7 @@ maintainers: - Johan Hovold description: > - The U-blox GNSS receivers can use UART, DDC (I2C), SPI and USB interfaces. + The u-blox GNSS receivers can use UART, DDC (I2C), SPI and USB interfaces. properties: compatible: @@ -36,6 +36,9 @@ properties: reset-gpios: maxItems: 1 + safeboot-gpios: + maxItems: 1 + vcc-supply: description: > Main voltage regulator @@ -64,6 +67,7 @@ examples: compatible = "u-blox,neo-8"; v-bckp-supply = <&gnss_v_bckp_reg>; vcc-supply = <&gnss_vcc_reg>; - reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio 1 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + safeboot-gpios = <&gpio 2 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; }; }; diff --git a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml index c213cb9ddb9f0d..5cfefbbea6ca71 100644 --- a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml @@ -66,5 +66,4 @@ examples: interrupts = ; }; - ... diff --git a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml index ab35bcf981016b..23410aeca30000 100644 --- a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml +++ b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml @@ -22,7 +22,6 @@ description: | ___ ________ chip select# |___________________| - maintainers: - Maxime Ripard diff --git a/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.yaml b/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.yaml index 640da5b9b0cc18..3a6a47f12982ce 100644 --- a/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.yaml +++ b/Documentation/devicetree/bindings/gpio/faraday,ftgpio010.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Faraday Technology FTGPIO010 GPIO Controller maintainers: - - Linus Walleij + - Linus Walleij properties: compatible: diff --git a/Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml b/Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml index 40d0be31e2000c..fa0148758b4b2b 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml @@ -8,7 +8,7 @@ title: Common GPIO lines maintainers: - Bartosz Golaszewski - - Linus Walleij + - Linus Walleij description: Pay attention to using proper GPIO flag (e.g. GPIO_ACTIVE_LOW) for the GPIOs diff --git a/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml b/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml index 3a1079d6ee200c..ebdb7ee5b790d3 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-ep9301.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: EP93xx GPIO controller maintainers: - - Linus Walleij + - Linus Walleij - Bartosz Golaszewski - Nikita Shubin diff --git a/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml b/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml index b4d55bf6a28548..ee5d5d25ae82fb 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-mmio.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Generic MMIO GPIO maintainers: - - Linus Walleij + - Linus Walleij - Bartosz Golaszewski description: diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml index aaf97124803f42..fed1b06495ad06 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-mxs.yaml @@ -28,6 +28,7 @@ properties: '#address-cells': const: 1 + '#size-cells': const: 0 @@ -35,7 +36,7 @@ properties: maxItems: 1 patternProperties: - "^(?!gpio@)[^@]+@[0-9]+$": + '^(?!gpio@)[^@]+@[0-9]+$': type: object properties: fsl,pinmux-ids: @@ -93,7 +94,7 @@ patternProperties: additionalProperties: false - "^gpio@[0-9]+$": + '^gpio@[0-9]+$': type: object properties: compatible: @@ -110,10 +111,10 @@ patternProperties: interrupt-controller: true - "#interrupt-cells": + '#interrupt-cells': const: 2 - "#gpio-cells": + '#gpio-cells': const: 2 gpio-controller: true @@ -123,8 +124,8 @@ patternProperties: - reg - interrupts - interrupt-controller - - "#interrupt-cells" - - "#gpio-cells" + - '#interrupt-cells' + - '#gpio-cells' - gpio-controller additionalProperties: false diff --git a/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.yaml b/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.yaml index bfcb1f364c3aa0..2a980c0ed86f64 100644 --- a/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/intel,ixp4xx-gpio.yaml @@ -22,7 +22,7 @@ description: | and this can be enabled by a special flag. maintainers: - - Linus Walleij + - Linus Walleij properties: compatible: diff --git a/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml b/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml index d78da7dd2a5668..184432d24ea181 100644 --- a/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml @@ -11,7 +11,10 @@ maintainers: properties: compatible: - items: + oneOf: + - items: + - const: microchip,pic64gx-gpio + - const: microchip,mpfs-gpio - enum: - microchip,mpfs-gpio - microchip,coregpio-rtl-v3 diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml index 65155bb701a9fb..7f420b9c048082 100644 --- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Marvell PXA GPIO controller maintainers: - - Linus Walleij + - Linus Walleij - Bartosz Golaszewski - Rob Herring diff --git a/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml b/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml index c51e10680c0a53..4d970e55104bb5 100644 --- a/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: ARM PL061 GPIO controller maintainers: - - Linus Walleij + - Linus Walleij - Rob Herring # We need a select here so we don't match all nodes with 'arm,primecell' diff --git a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml index ab2afc0e4153dc..bba6f5b6606fdf 100644 --- a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml @@ -111,8 +111,8 @@ additionalProperties: false required: - compatible - reg - - "#address-cells" - - "#size-cells" + - '#address-cells' + - '#size-cells' examples: - | diff --git a/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml b/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml index b3e8951959b52e..40b4a755144960 100644 --- a/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml @@ -12,7 +12,7 @@ description: with pinctrl-nomadik. maintainers: - - Linus Walleij + - Linus Walleij properties: $nodename: diff --git a/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml b/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml index 4555f1644a4dfe..66dd602e797ddc 100644 --- a/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/st,stmpe-gpio.yaml @@ -14,7 +14,7 @@ description: GPIO portions of these expanders. maintainers: - - Linus Walleij + - Linus Walleij properties: compatible: diff --git a/Documentation/devicetree/bindings/gpio/trivial-gpio.yaml b/Documentation/devicetree/bindings/gpio/trivial-gpio.yaml index c994177de940af..3f4bbd57fc52c0 100644 --- a/Documentation/devicetree/bindings/gpio/trivial-gpio.yaml +++ b/Documentation/devicetree/bindings/gpio/trivial-gpio.yaml @@ -22,6 +22,8 @@ properties: - cznic,moxtet-gpio - dlg,slg7xl45106 - fcs,fxl6408 + - fsl,ls1046aqds-fpga-gpio-stat-pres2 + - fsl,lx2160ardb-fpga-gpio-sfp - gateworks,pld-gpio - ibm,ppc4xx-gpio - loongson,ls1x-gpio diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml index be198182dbfe0d..db49b8ff8c7486 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml @@ -22,6 +22,7 @@ properties: - mediatek,mt8183-mali - mediatek,mt8183b-mali - mediatek,mt8186-mali + - mediatek,mt8365-mali - realtek,rtd1619-mali - renesas,r9a07g044-mali - renesas,r9a07g054-mali diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml index a5b4e00217587c..bee9faf1d3f827 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml @@ -18,6 +18,8 @@ properties: oneOf: - items: - enum: + - mediatek,mt8196-mali + - nxp,imx95-mali # G310 - rockchip,rk3588-mali - const: arm,mali-valhall-csf # Mali Valhall GPU model/revision is fully discoverable @@ -44,7 +46,9 @@ properties: minItems: 1 items: - const: core - - const: coregroup + - enum: + - coregroup + - stacks - const: stacks mali-supply: true @@ -91,7 +95,6 @@ required: - interrupts - interrupt-names - clocks - - mali-supply additionalProperties: false @@ -108,6 +111,29 @@ allOf: power-domains: maxItems: 1 power-domain-names: false + required: + - mali-supply + - if: + properties: + compatible: + contains: + const: mediatek,mt8196-mali + then: + properties: + mali-supply: false + sram-supply: false + operating-points-v2: false + power-domains: + maxItems: 1 + power-domain-names: false + clocks: + maxItems: 2 + clock-names: + items: + - const: core + - const: stacks + required: + - power-domains examples: - | @@ -143,5 +169,17 @@ examples: }; }; }; + - | + gpu@48000000 { + compatible = "mediatek,mt8196-mali", "arm,mali-valhall-csf"; + reg = <0x48000000 0x480000>; + clocks = <&gpufreq 0>, <&gpufreq 1>; + clock-names = "core", "stacks"; + interrupts = , + , + ; + interrupt-names = "job", "mmu", "gpu"; + power-domains = <&gpufreq>; + }; ... diff --git a/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml b/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml index c87d7bece0ecd6..86ef689853177d 100644 --- a/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml +++ b/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml @@ -13,6 +13,18 @@ maintainers: properties: compatible: oneOf: + - items: + - enum: + - renesas,r8a7796-gpu + - renesas,r8a77961-gpu + - const: img,img-gx6250 + - const: img,img-rogue + - items: + - enum: + - renesas,r8a77965-gpu + - renesas,r8a779a0-gpu + - const: img,img-ge7800 + - const: img,img-rogue - items: - enum: - ti,am62-gpu @@ -86,48 +98,56 @@ allOf: properties: compatible: contains: - const: img,img-axe-1-16m + enum: + - ti,am62-gpu + - ti,j721s2-gpu then: properties: - power-domains: - items: - - description: Power domain A - power-domain-names: + clocks: maxItems: 1 - required: - - power-domains - - power-domain-names - if: properties: compatible: contains: - const: thead,th1520-gpu + enum: + - img,img-ge7800 + - img,img-gx6250 + - thead,th1520-gpu then: properties: clocks: minItems: 3 clock-names: minItems: 3 + + - if: + properties: + compatible: + contains: + const: img,img-axe-1-16m + then: + properties: power-domains: - items: - - description: The single, unified power domain for the GPU on the - TH1520 SoC, integrating all internal IP power domains. - power-domain-names: false + maxItems: 1 + power-domain-names: + maxItems: 1 required: - power-domains + - power-domain-names - if: properties: compatible: contains: - const: img,img-bxs-4-64 + enum: + - img,img-bxs-4-64 + - img,img-ge7800 + - img,img-gx6250 then: properties: power-domains: - items: - - description: Power domain A - - description: Power domain B + minItems: 2 power-domain-names: minItems: 2 required: @@ -138,13 +158,16 @@ allOf: properties: compatible: contains: - enum: - - ti,am62-gpu - - ti,j721s2-gpu + const: thead,th1520-gpu then: properties: - clocks: - maxItems: 1 + power-domains: + items: + - description: The single, unified power domain for the GPU on the + TH1520 SoC, integrating all internal IP power domains. + power-domain-names: false + required: + - power-domains examples: - | diff --git a/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml b/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml index 383020450d780c..b9cdfe52b62ff3 100644 --- a/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml +++ b/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml @@ -20,12 +20,14 @@ properties: - samsung,exynos5433-chipid - samsung,exynos7-chipid - samsung,exynos7870-chipid + - samsung,exynos8890-chipid - const: samsung,exynos4210-chipid - items: - enum: - samsung,exynos2200-chipid - samsung,exynos7885-chipid - samsung,exynos8895-chipid + - samsung,exynos9610-chipid - samsung,exynos9810-chipid - samsung,exynos990-chipid - samsung,exynosautov9-chipid diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml index 152935334c76ac..3e3f49cf2f52e8 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml @@ -81,7 +81,6 @@ required: - compatible - reg - additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml index f60e06ab7d0a08..c2f7c6ee1a3729 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml @@ -93,7 +93,6 @@ allOf: adi,fault-q: default: 4 - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/hwmon/apm,xgene-slimpro-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/apm,xgene-slimpro-hwmon.yaml new file mode 100644 index 00000000000000..58c51626a9cee4 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/apm,xgene-slimpro-hwmon.yaml @@ -0,0 +1,30 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/apm,xgene-slimpro-hwmon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: APM X-Gene SLIMpro hwmon + +maintainers: + - Khuong Dinh + +properties: + compatible: + const: apm,xgene-slimpro-hwmon + + mboxes: + maxItems: 1 + +required: + - compatible + - mboxes + +additionalProperties: false + +examples: + - | + hwmon { + compatible = "apm,xgene-slimpro-hwmon"; + mboxes = <&mailbox 7>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt b/Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt deleted file mode 100644 index 59b38557f1bb6d..00000000000000 --- a/Documentation/devicetree/bindings/hwmon/apm-xgene-hwmon.txt +++ /dev/null @@ -1,14 +0,0 @@ -APM X-Gene hwmon driver - -APM X-Gene SOC sensors are accessed over the "SLIMpro" mailbox. - -Required properties : - - compatible : should be "apm,xgene-slimpro-hwmon" - - mboxes : use the label reference for the mailbox as the first parameter. - The second parameter is the channel number. - -Example : - hwmonslimpro { - compatible = "apm,xgene-slimpro-hwmon"; - mboxes = <&mailbox 7>; - }; diff --git a/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml b/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml index 9e5ed901ae54c6..851fb16ec7fa10 100644 --- a/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml +++ b/Documentation/devicetree/bindings/hwmon/aspeed,g6-pwm-tach.yaml @@ -18,8 +18,11 @@ description: | properties: compatible: - enum: - - aspeed,ast2600-pwm-tach + oneOf: + - items: + - const: aspeed,ast2700-pwm-tach + - const: aspeed,ast2600-pwm-tach + - const: aspeed,ast2600-pwm-tach reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/hwmon/max31785.txt b/Documentation/devicetree/bindings/hwmon/max31785.txt deleted file mode 100644 index 106e08c56aaa9c..00000000000000 --- a/Documentation/devicetree/bindings/hwmon/max31785.txt +++ /dev/null @@ -1,22 +0,0 @@ -Bindings for the Maxim MAX31785 Intelligent Fan Controller -========================================================== - -Reference: - -https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf - -The Maxim MAX31785 is a PMBus device providing closed-loop, multi-channel fan -management with temperature and remote voltage sensing. Various fan control -features are provided, including PWM frequency control, temperature hysteresis, -dual tachometer measurements, and fan health monitoring. - -Required properties: -- compatible : One of "maxim,max31785" or "maxim,max31785a" -- reg : I2C address, one of 0x52, 0x53, 0x54, 0x55. - -Example: - - fans@52 { - compatible = "maxim,max31785"; - reg = <0x52>; - }; diff --git a/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml b/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml index b1ff496f87f958..558cbd251b0fd8 100644 --- a/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml +++ b/Documentation/devicetree/bindings/hwmon/maxim,max31790.yaml @@ -20,7 +20,11 @@ description: > properties: compatible: - const: maxim,max31790 + enum: + - maxim,max31785 + - maxim,max31785a + - maxim,max31785b + - maxim,max31790 reg: maxItems: 1 @@ -31,11 +35,17 @@ properties: resets: maxItems: 1 + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + "#pwm-cells": const: 1 patternProperties: - "^fan-[0-9]+$": + "^fan@[0-9]+$": $ref: fan-common.yaml# unevaluatedProperties: false @@ -56,13 +66,17 @@ examples: reg = <0x20>; clocks = <&sys_clk>; resets = <&reset 0>; + #address-cells = <1>; #pwm-cells = <1>; + #size-cells = <0>; - fan-0 { + fan@0 { + reg = <0x0>; pwms = <&pwm_provider 1>; }; - fan-1 { + fan@1 { + reg = <0x1>; pwms = <&pwm_provider 2>; }; }; diff --git a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml index 1b871f166e7914..164068ba069d73 100644 --- a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml +++ b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml @@ -45,7 +45,6 @@ properties: - ti,tmp461 - winbond,w83l771 - interrupts: items: - description: | diff --git a/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml b/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml index b8e500e6cd9f86..efd10bcfb0820e 100644 --- a/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml +++ b/Documentation/devicetree/bindings/hwmon/ntc-thermistor.yaml @@ -6,7 +6,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: NTC thermistor temperature sensors maintainers: - - Linus Walleij + - Linus Walleij description: | Thermistors with negative temperature coefficient (NTC) are resistors that @@ -75,6 +75,7 @@ properties: - const: murata,ncp15wl333 - const: murata,ncp03wf104 - const: murata,ncp15xh103 + - const: murata,ncp18wm474 - const: samsung,1404-001221 # Deprecated "ntc," compatible strings - const: ntc,ncp15wb473 diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/adi,max17616.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/adi,max17616.yaml new file mode 100644 index 00000000000000..fa48af81e083cb --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/pmbus/adi,max17616.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/pmbus/adi,max17616.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices MAX17616/MAX17616A Current-Limiter with PMBus Interface + +maintainers: + - Kim Seer Paller + +description: | + The MAX17616/MAX17616A is a 3V to 80V, 7A current-limiter with overvoltage, + surge, undervoltage, reverse polarity, and loss of ground protection. It allows + monitoring of input/output voltage, output current and temperature through the + PMBus serial interface. + Datasheet: + https://www.analog.com/en/products/max17616.html + +properties: + compatible: + const: adi,max17616 + + reg: + maxItems: 1 + + vcc-supply: true + + interrupts: + description: Fault condition signal provided on SMBALERT pin. + maxItems: 1 + +required: + - compatible + - reg + - vcc-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hwmon@16 { + compatible = "adi,max17616"; + reg = <0x16>; + vcc-supply = <&vcc>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/hwmon/st,tsc1641.yaml b/Documentation/devicetree/bindings/hwmon/st,tsc1641.yaml new file mode 100644 index 00000000000000..aaf244790663d5 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/st,tsc1641.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/st,tsc1641.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ST Microelectronics TSC1641 I2C power monitor + +maintainers: + - Igor Reznichenko + +description: | + TSC1641 is a 60 V, 16-bit high-precision power monitor with I2C and + MIPI I3C interface + + Datasheets: + https://www.st.com/resource/en/datasheet/tsc1641.pdf + +properties: + compatible: + const: st,tsc1641 + + reg: + maxItems: 1 + + interrupts: + description: Optional alert interrupt. + maxItems: 1 + + shunt-resistor-micro-ohms: + description: Shunt resistor value in micro-ohms. Since device has internal + 16-bit RSHUNT register with 10 uOhm LSB, the maximum value is capped at + 655.35 mOhm. + minimum: 100 + default: 1000 + maximum: 655350 + + st,alert-polarity-active-high: + $ref: /schemas/types.yaml#/definitions/flag + description: Default value is 0 which configures the normal polarity of the + ALERT pin, being active low open-drain. Setting this to 1 configures the + polarity of the ALERT pin to be inverted and active high open-drain. + Specify this property to set the alert polarity to active-high. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + power-sensor@40 { + compatible = "st,tsc1641"; + reg = <0x40>; + shunt-resistor-micro-ohms = <1000>; + st,alert-polarity-active-high; + }; + }; diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml index cba5b4a1b81f46..0fe6ea190f60f7 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml @@ -20,7 +20,6 @@ description: | https://www.ti.com/lit/gpn/tmp513 https://www.ti.com/lit/gpn/tmp512 - properties: compatible: enum: diff --git a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml index ee7de53e19184d..d57e4bf8f65ff1 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml @@ -15,7 +15,6 @@ description: | Datasheets: https://www.ti.com/lit/gpn/tps23861 - properties: compatible: enum: diff --git a/Documentation/devicetree/bindings/hwmon/winbond,w83781d.yaml b/Documentation/devicetree/bindings/hwmon/winbond,w83781d.yaml index 6971ecb314ebc9..d97b0e69847761 100644 --- a/Documentation/devicetree/bindings/hwmon/winbond,w83781d.yaml +++ b/Documentation/devicetree/bindings/hwmon/winbond,w83781d.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Winbond W83781 and compatible hardware monitor IC maintainers: - - Linus Walleij + - Linus Walleij properties: compatible: diff --git a/Documentation/devicetree/bindings/i2c/arm,i2c-versatile.yaml b/Documentation/devicetree/bindings/i2c/arm,i2c-versatile.yaml index e58465d1b0c881..26026dfd788a45 100644 --- a/Documentation/devicetree/bindings/i2c/arm,i2c-versatile.yaml +++ b/Documentation/devicetree/bindings/i2c/arm,i2c-versatile.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: I2C Controller on ARM Ltd development platforms maintainers: - - Linus Walleij + - Linus Walleij allOf: - $ref: /schemas/i2c/i2c-controller.yaml# diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml index b6af924dee2e33..d8610daa10cd8c 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml @@ -27,7 +27,6 @@ description: |+ | '------' | | dev | | dev | | dev | '------------' '-----' '-----' '-----' - allOf: - $ref: /schemas/i2c/i2c-mux.yaml# diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml index 4ac5a40a3886f4..91805fe8f3936e 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.yaml @@ -37,6 +37,7 @@ properties: - rockchip,px30-i2c - rockchip,rk3308-i2c - rockchip,rk3328-i2c + - rockchip,rk3506-i2c - rockchip,rk3528-i2c - rockchip,rk3562-i2c - rockchip,rk3568-i2c diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml index 9bc99d736343f1..a3fe1eea6aece9 100644 --- a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml @@ -15,6 +15,7 @@ properties: oneOf: - enum: - qcom,msm8226-cci + - qcom,msm8953-cci - qcom,msm8974-cci - qcom,msm8996-cci @@ -25,6 +26,7 @@ properties: - items: - enum: + - qcom,kaanapali-cci - qcom,qcm2290-cci - qcom,sa8775p-cci - qcom,sc7280-cci @@ -36,6 +38,7 @@ properties: - qcom,sm8450-cci - qcom,sm8550-cci - qcom,sm8650-cci + - qcom,sm8750-cci - qcom,x1e80100-cci - const: qcom,msm8996-cci # CCI v2 @@ -128,7 +131,9 @@ allOf: compatible: contains: enum: + - qcom,kaanapali-cci - qcom,qcm2290-cci + - qcom,sm8750-cci then: properties: clocks: @@ -146,6 +151,7 @@ allOf: - contains: enum: - qcom,msm8916-cci + - qcom,msm8953-cci - const: qcom,msm8996-cci then: diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml index 758d8f6321e10b..06a04db3eda2ad 100644 --- a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.yaml @@ -9,7 +9,7 @@ title: Qualcomm Universal Peripheral (QUP) I2C controller maintainers: - Andy Gross - Bjorn Andersson - - Krzysztof Kozlowski + - Krzysztof Kozlowski allOf: - $ref: /schemas/i2c/i2c-controller.yaml# diff --git a/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml b/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml index 17ce39c19ab152..f9a449fee2b08f 100644 --- a/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml @@ -64,7 +64,6 @@ patternProperties: required: - reg - allOf: - if: properties: diff --git a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml index d904191bb0c6ea..91420018880958 100644 --- a/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml @@ -34,8 +34,15 @@ properties: - const: snps,designware-i2c - description: Baikal-T1 SoC System I2C controller const: baikal,bt1-sys-i2c + - description: Mobileye EyeQ DesignWare I2C controller + items: + - enum: + - mobileye,eyeq7h-i2c + - const: mobileye,eyeq6lplus-i2c + - const: snps,designware-i2c - items: - enum: + - mobileye,eyeq6lplus-i2c - mscc,ocelot-i2c - sophgo,sg2044-i2c - thead,th1520-i2c diff --git a/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml index 012402debfeb24..63a459c63f6a7e 100644 --- a/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml @@ -12,7 +12,7 @@ description: The Nomadik I2C host controller began its life in the ST DB8500 after the merge of these two companies wireless divisions. maintainers: - - Linus Walleij + - Linus Walleij # Need a custom select here or 'arm,primecell' will match on lots of nodes select: diff --git a/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml b/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml index 28139b67666105..19cfffb39296be 100644 --- a/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml +++ b/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml @@ -16,7 +16,6 @@ description: | can be selected by writing the appropriate device number to an I2C config register. - +--------------------------------------------------+ | Mule | 0x18| +---------------+ | @@ -34,7 +33,6 @@ description: | | |__/ +--------+ | +--------------------------------------------------+ - allOf: - $ref: /schemas/i2c/i2c-mux.yaml# diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml index 5f646737581108..e803457d3f554f 100644 --- a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml +++ b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml @@ -14,7 +14,11 @@ allOf: properties: compatible: - const: snps,dw-i3c-master-1.00a + oneOf: + - const: snps,dw-i3c-master-1.00a + - items: + - const: altr,agilex5-dw-i3c-master + - const: snps,dw-i3c-master-1.00a reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml index a23a626bfab6f6..61d7ba89adc28d 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml @@ -35,15 +35,17 @@ properties: spi-3wire: true interrupts: - maxItems: 1 + minItems: 1 + maxItems: 2 interrupt-names: + minItems: 1 items: - enum: [INT1, INT2] + - const: INT2 dependencies: interrupts: [ interrupt-names ] - interrupt-names: [ interrupts ] required: - compatible @@ -84,7 +86,8 @@ examples: spi-cpol; spi-cpha; interrupt-parent = <&gpio0>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "INT2"; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, + <1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "INT1", "INT2"; }; }; diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl380.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl380.yaml index f1ff5ff4f478dc..ab517720a6a794 100644 --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl380.yaml +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl380.yaml @@ -11,16 +11,19 @@ maintainers: - Antoniu Miclaus description: | - The ADXL380/ADXL382 is a low noise density, low power, 3-axis - accelerometer with selectable measurement ranges. The ADXL380 - supports the ±4 g, ±8 g, and ±16 g ranges, and the ADXL382 supports - ±15 g, ±30 g, and ±60 g ranges. + The ADXL380/ADXL382 and ADXL318/ADXL319 are low noise density, + low power, 3-axis accelerometers with selectable measurement ranges. + The ADXL380 and ADXL318 support the ±4 g, ±8 g, and ±16 g ranges, + while the ADXL382 and ADXL319 support ±15 g, ±30 g, and ±60 g ranges. + https://www.analog.com/en/products/adxl318.html https://www.analog.com/en/products/adxl380.html properties: compatible: enum: + - adi,adxl318 + - adi,adxl319 - adi,adxl380 - adi,adxl382 diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml index ec643de031a341..8c820c27f781e8 100644 --- a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/iio/accel/bosch,bma220.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Bosch BMA220 Trixial Acceleration Sensor +title: Bosch BMA220 Triaxial Acceleration Sensor maintainers: - Jonathan Cameron @@ -20,6 +20,9 @@ properties: interrupts: maxItems: 1 + spi-cpha: true + spi-cpol: true + vdda-supply: true vddd-supply: true vddio-supply: true @@ -44,8 +47,10 @@ examples: compatible = "bosch,bma220"; reg = <0>; spi-max-frequency = <2500000>; + spi-cpol; + spi-cpha; interrupt-parent = <&gpio0>; - interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; }; }; ... diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml index 85c9537f1f0299..c1387e02eb8260 100644 --- a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Bosch BMA255 and Similar Accelerometers maintainers: - - Linus Walleij + - Linus Walleij - Stephan Gerhold description: diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml index ed849ba1b77bc6..ccd6a0ac1539e9 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4080.yaml @@ -26,6 +26,11 @@ properties: compatible: enum: - adi,ad4080 + - adi,ad4081 + - adi,ad4083 + - adi,ad4084 + - adi,ad4086 + - adi,ad4087 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml index 8dae89ecb64d72..b91bfb16ed6bc6 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml @@ -30,7 +30,6 @@ description: | * https://www.analog.com/en/products/adaq4380-4.html * https://www.analog.com/en/products/adaq4381-4.html - $ref: /schemas/spi/spi-peripheral-props.yaml# properties: diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml index 1180d2ffbf846e..73c8e9c532f393 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml @@ -166,7 +166,6 @@ properties: An example of backend can be found at http://analogdevicesinc.github.io/hdl/library/axi_ad7606x/index.html - patternProperties: "^channel@[1-8]$": type: object diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml index 9ee4d977c5edfa..238a8c9c41437a 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml @@ -48,7 +48,6 @@ properties: enum: [2500000, 4096000] default: 4096000 - '#io-channel-cells': const: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml index bd429552d568a0..f22eba0250ee5c 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml @@ -57,7 +57,6 @@ properties: description: External clock source when not using crystal maxItems: 1 - "#clock-cells": description: ADE9000 can provide clock output via CLKOUT pin with external buffer. diff --git a/Documentation/devicetree/bindings/iio/adc/adi,max14001.yaml b/Documentation/devicetree/bindings/iio/adc/adi,max14001.yaml new file mode 100644 index 00000000000000..a2dc59c9dcd869 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,max14001.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2023-2025 Analog Devices Inc. +# Copyright 2023 Kim Seer Paller +# Copyright 2025 Marilene Andrade Garcia +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,max14001.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices MAX14001-MAX14002 ADC + +maintainers: + - Kim Seer Paller + - Marilene Andrade Garcia + +description: | + Single channel 10 bit ADC with SPI interface. + Datasheet can be found here + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX14001-MAX14002.pdf + +$ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + oneOf: + - const: adi,max14002 + - items: + - const: adi,max14001 + - const: adi,max14002 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 5000000 + + vdd-supply: + description: + Isolated DC-DC power supply input voltage. + + vddl-supply: + description: + Logic power supply. + + refin-supply: + description: + ADC voltage reference supply. + + interrupts: + minItems: 1 + items: + - description: | + cout: comparator output signal that asserts high on the COUT pin + when ADC readings exceed the upper threshold and low when readings + fall below the lower threshold. + - description: | + fault: when fault reporting is enabled, the FAULT pin is asserted + low whenever one of the monitored fault conditions occurs. + + interrupt-names: + minItems: 1 + items: + - const: cout + - const: fault + +required: + - compatible + - reg + - vdd-supply + - vddl-supply + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,max14001", "adi,max14002"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-lsb-first; + vdd-supply = <&vdd>; + vddl-supply = <&vddl>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml index 5c08d8b6e9951d..509bfb1007c460 100644 --- a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml @@ -29,6 +29,8 @@ properties: enum: - aspeed,ast2600-adc0 - aspeed,ast2600-adc1 + - aspeed,ast2700-adc0 + - aspeed,ast2700-adc1 description: Their trimming data, which is used to calibrate internal reference volage, locates in different address of OTP. diff --git a/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml index 4e695b97d0156b..9ea44ce63f2586 100644 --- a/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml @@ -36,7 +36,6 @@ properties: "#io-channel-cells": const: 1 - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml index 14363389f30aef..d9e825e5054fe5 100644 --- a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml @@ -42,6 +42,7 @@ properties: - mediatek,mt8183-auxadc - mediatek,mt8186-auxadc - mediatek,mt8188-auxadc + - mediatek,mt8189-auxadc - mediatek,mt8195-auxadc - mediatek,mt8516-auxadc - const: mediatek,mt8173-auxadc diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml index 58ea1ca4a5ee80..c978c3a3e31af2 100644 --- a/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm's PM8xxx voltage XOADC maintainers: - - Linus Walleij + - Linus Walleij description: | The Qualcomm PM8xxx PMICs contain a HK/XO ADC (Housekeeping/Crystal diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,r9a09g077-adc.yaml b/Documentation/devicetree/bindings/iio/adc/renesas,r9a09g077-adc.yaml new file mode 100644 index 00000000000000..dc0206b282315d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/renesas,r9a09g077-adc.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/renesas,r9a09g077-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/T2H / RZ/N2H ADC12 + +maintainers: + - Cosmin Tanislav + +description: | + A/D Converter block is a successive approximation analog-to-digital converter + with a 12-bit accuracy. Up to 16 analog input channels can be selected. + Conversions can be performed in single or continuous mode. Result of the ADC + is stored in a 16-bit data register corresponding to each channel. + +properties: + compatible: + oneOf: + - items: + - const: renesas,r9a09g087-adc # RZ/N2H + - const: renesas,r9a09g077-adc # RZ/T2H + - items: + - const: renesas,r9a09g077-adc # RZ/T2H + + reg: + maxItems: 1 + + interrupts: + items: + - description: A/D scan end interrupt + - description: A/D scan end interrupt for Group B + - description: A/D scan end interrupt for Group C + - description: Window A compare match + - description: Window B compare match + - description: Compare match + - description: Compare mismatch + + interrupt-names: + items: + - const: adi + - const: gbadi + - const: gcadi + - const: cmpai + - const: cmpbi + - const: wcmpm + - const: wcmpum + + clocks: + items: + - description: Converter clock + - description: Peripheral clock + + clock-names: + items: + - const: adclk + - const: pclk + + power-domains: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + "#io-channel-cells": + const: 1 + +patternProperties: + "^channel@[0-9a-f]$": + $ref: adc.yaml + type: object + description: The external channels which are connected to the ADC. + + properties: + reg: + description: The channel number. + maximum: 15 + + required: + - reg + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + +additionalProperties: false + +examples: + - | + #include + #include + + adc@80008000 { + compatible = "renesas,r9a09g077-adc"; + reg = <0x80008000 0x400>; + interrupts = , + , + , + , + , + , + ; + interrupt-names = "adi", "gbadi", "gcadi", + "cmpai", "cmpbi", "wcmpm", "wcmpum"; + clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>, + <&cpg CPG_MOD 225>; + clock-names = "adclk", "pclk"; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + channel@0 { + reg = <0x0>; + }; + channel@1 { + reg = <0x1>; + }; + channel@2 { + reg = <0x2>; + }; + channel@3 { + reg = <0x3>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/adc/renesas,rzn1-adc.yaml b/Documentation/devicetree/bindings/iio/adc/renesas,rzn1-adc.yaml new file mode 100644 index 00000000000000..1a40352165fb05 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/renesas,rzn1-adc.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/renesas,rzn1-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/N1 Analog to Digital Converter (ADC) + +maintainers: + - Herve Codina + +description: + The Renesas RZ/N1 ADC controller available in the Renesas RZ/N1 SoCs family + can use up to two internal ADC cores (ADC1 and ADC2) those internal cores are + handled through ADC controller virtual channels. + +properties: + compatible: + items: + - const: renesas,r9a06g032-adc # RZ/N1D + - const: renesas,rzn1-adc + + reg: + maxItems: 1 + + clocks: + items: + - description: APB internal bus clock + - description: ADC clock + + clock-names: + items: + - const: pclk + - const: adc + + power-domains: + maxItems: 1 + + adc1-avdd-supply: + description: + ADC1 analog power supply. + + adc1-vref-supply: + description: + ADC1 reference voltage supply. + + adc2-avdd-supply: + description: + ADC2 analog power supply. + + adc2-vref-supply: + description: + ADC2 reference voltage supply. + + '#io-channel-cells': + const: 1 + description: | + Channels numbers available: + if ADC1 is used (i.e. adc1-{avdd,vref}-supply present): + - 0: ADC1 IN0 + - 1: ADC1 IN1 + - 2: ADC1 IN2 + - 3: ADC1 IN3 + - 4: ADC1 IN4 + - 5: ADC1 IN6 + - 6: ADC1 IN7 + - 7: ADC1 IN8 + if ADC2 is used (i.e. adc2-{avdd,vref}-supply present): + - 8: ADC2 IN0 + - 9: ADC2 IN1 + - 10: ADC2 IN2 + - 11: ADC2 IN3 + - 12: ADC2 IN4 + - 13: ADC2 IN6 + - 14: ADC2 IN7 + - 15: ADC2 IN8 + +required: + - compatible + - reg + - clocks + - clock-names + - power-domains + - '#io-channel-cells' + +# At least one of avvd/vref supplies +anyOf: + - required: + - adc1-vref-supply + - adc1-avdd-supply + - required: + - adc2-vref-supply + - adc2-avdd-supply + +additionalProperties: false + +examples: + - | + #include + + adc: adc@40065000 { + compatible = "renesas,r9a06g032-adc", "renesas,rzn1-adc"; + reg = <0x40065000 0x200>; + clocks = <&sysctrl R9A06G032_HCLK_ADC>, <&sysctrl R9A06G032_CLK_ADC>; + clock-names = "pclk", "adc"; + power-domains = <&sysctrl>; + adc1-avdd-supply = <&adc1_avdd>; + adc1-vref-supply = <&adc1_vref>; + #io-channel-cells = <1>; + }; +... diff --git a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml index f776041fd08f8f..6769d679c90733 100644 --- a/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml @@ -16,6 +16,9 @@ properties: - const: rockchip,rk3066-tsadc - const: rockchip,rk3399-saradc - const: rockchip,rk3528-saradc + - items: + - const: rockchip,rk3506-saradc + - const: rockchip,rk3528-saradc - const: rockchip,rk3562-saradc - const: rockchip,rk3588-saradc - items: diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml index 17bb60e18a1c23..c4c4575d3fa965 100644 --- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml @@ -456,7 +456,6 @@ patternProperties: items: minimum: 40 - - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml index 1caa896fce821a..de91cb03fdc6a5 100644 --- a/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml @@ -57,7 +57,6 @@ description: | 4 | batt_dischrg_i 5 | ts_v - properties: compatible: oneOf: diff --git a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml index 4151f99b42aa79..9752d145006410 100644 --- a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml +++ b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml @@ -29,7 +29,6 @@ description: | | GND - properties: compatible: const: voltage-divider diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad5446.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad5446.yaml new file mode 100644 index 00000000000000..2669d2c4948bbe --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5446.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/adi,ad5446.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD5446 and similar DACs + +maintainers: + - Michael Hennerich + - Nuno Sá + +description: + Digital to Analog Converter devices supporting both SPI and I2C interfaces. + These devices feature a range of resolutions from 8-bit to 16-bit. + +properties: + compatible: + oneOf: + - description: SPI DACs + enum: + - adi,ad5300 + - adi,ad5310 + - adi,ad5320 + - adi,ad5444 + - adi,ad5446 + - adi,ad5450 + - adi,ad5451 + - adi,ad5452 + - adi,ad5453 + - adi,ad5512a + - adi,ad5541a + - adi,ad5542 + - adi,ad5542a + - adi,ad5543 + - adi,ad5553 + - adi,ad5600 + - adi,ad5601 + - adi,ad5611 + - adi,ad5621 + - adi,ad5641 + - adi,ad5620-2500 + - adi,ad5620-1250 + - adi,ad5640-2500 + - adi,ad5640-1250 + - adi,ad5660-2500 + - adi,ad5660-1250 + - adi,ad5662 + - ti,dac081s101 + - ti,dac101s101 + - ti,dac121s101 + - description: I2C DACs + enum: + - adi,ad5301 + - adi,ad5311 + - adi,ad5321 + - adi,ad5602 + - adi,ad5612 + - adi,ad5622 + + reg: + maxItems: 1 + + vcc-supply: + description: + Reference voltage supply. If not supplied, devices with internal + voltage reference will use that. + +required: + - compatible + - reg + +allOf: + - if: + properties: + compatible: + contains: + enum: + - adi,ad5300 + - adi,ad5310 + - adi,ad5320 + - adi,ad5444 + - adi,ad5446 + - adi,ad5450 + - adi,ad5451 + - adi,ad5452 + - adi,ad5453 + - adi,ad5512a + - adi,ad5541a + - adi,ad5542 + - adi,ad5542a + - adi,ad5543 + - adi,ad5553 + - adi,ad5600 + - adi,ad5601 + - adi,ad5611 + - adi,ad5621 + - adi,ad5641 + - adi,ad5620-2500 + - adi,ad5620-1250 + - adi,ad5640-2500 + - adi,ad5640-1250 + - adi,ad5660-2500 + - adi,ad5660-1250 + - adi,ad5662 + - ti,dac081s101 + - ti,dac101s101 + - ti,dac121s101 + then: + allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + dac@0 { + compatible = "adi,ad5446"; + reg = <0>; + vcc-supply = <&dac_vref>; + }; + }; + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + dac@42 { + compatible = "adi,ad5622"; + reg = <0x42>; + vcc-supply = <&dac_vref>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml index 64f2352aac3d51..ca40359a3944a4 100644 --- a/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml +++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml @@ -37,7 +37,6 @@ required: - compatible - reg - allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# diff --git a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml index f3242dc0e7e64f..3a307ac50aa7f4 100644 --- a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml +++ b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Invensense MPU-3050 Gyroscope maintainers: - - Linus Walleij + - Linus Walleij properties: compatible: diff --git a/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml b/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml index 967778fb0ce89f..d4753c85ecc3fd 100644 --- a/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml +++ b/Documentation/devicetree/bindings/iio/health/maxim,max30100.yaml @@ -27,6 +27,14 @@ properties: LED current whilst the engine is running. First indexed value is the configuration for the RED LED, and second value is for the IR LED. + maxim,pulse-width-us: + description: | + LED pulse width in microseconds. Appropriate pulse width depends on + factors such as optical window absorption, LED-to-sensor distance, + and expected reflectivity of the skin or contact surface. + enum: [200, 400, 800, 1600] + default: 1600 + additionalProperties: false required: diff --git a/Documentation/devicetree/bindings/iio/imu/bosch,smi330.yaml b/Documentation/devicetree/bindings/iio/imu/bosch,smi330.yaml new file mode 100644 index 00000000000000..0270ca456d2bcf --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/bosch,smi330.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/imu/bosch,smi330.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch SMI330 6-Axis IMU + +maintainers: + - Stefan Gutmann + +description: + SMI330 is a 6-axis inertial measurement unit that supports acceleration and + gyroscopic measurements with hardware fifo buffering. Sensor also provides + events information such as motion, no-motion and tilt detection. + +properties: + compatible: + const: bosch,smi330 + + reg: + maxItems: 1 + + vdd-supply: + description: provide VDD power to the sensor. + + vddio-supply: + description: provide VDD IO power to the sensor. + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + maxItems: 2 + items: + enum: + - INT1 + - INT2 + + drive-open-drain: + type: boolean + description: + set if the interrupt pin(s) should be configured as + open drain. If not set, defaults to push-pull. + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + // Example for I2C + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + imu@68 { + compatible = "bosch,smi330"; + reg = <0x68>; + vddio-supply = <&vddio>; + vdd-supply = <&vdd>; + interrupt-parent = <&gpio>; + interrupts = <26 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT1"; + }; + }; + + // Example for SPI + #include + spi { + #address-cells = <1>; + #size-cells = <0>; + + imu@0 { + compatible = "bosch,smi330"; + reg = <0>; + spi-max-frequency = <10000000>; + interrupt-parent = <&gpio>; + interrupts = <26 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT1"; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm45600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm45600.yaml new file mode 100644 index 00000000000000..e0b78d14420feb --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm45600.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/imu/invensense,icm45600.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: InvenSense ICM-45600 Inertial Measurement Unit + +maintainers: + - Remi Buisson + +description: | + 6-axis MotionTracking device that combines a 3-axis gyroscope and a 3-axis + accelerometer. + + It has a configurable host interface that supports I3C, I2C and SPI serial + communication, features up to 8kB FIFO and 2 programmable interrupts with + ultra-low-power wake-on-motion support to minimize system power consumption. + + Other industry-leading features include InvenSense on-chip APEX Motion + Processing engine for gesture recognition, activity classification, and + pedometer, along with programmable digital filters, and an embedded + temperature sensor. + + https://invensense.tdk.com/wp-content/uploads/documentation/DS-000576_ICM-45605.pdf + +properties: + compatible: + enum: + - invensense,icm45605 + - invensense,icm45606 + - invensense,icm45608 + - invensense,icm45634 + - invensense,icm45686 + - invensense,icm45687 + - invensense,icm45688p + - invensense,icm45689 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + items: + - enum: [int1, int2] + - const: int2 + description: Choose chip interrupt pin to be used as interrupt input. + + drive-open-drain: + type: boolean + + vdd-supply: true + + vddio-supply: true + + mount-matrix: true + +required: + - compatible + - reg + - vdd-supply + - vddio-supply + +unevaluatedProperties: false + +examples: + - | + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + imu@68 { + compatible = "invensense,icm45605"; + reg = <0x68>; + interrupt-parent = <&gpio2>; + interrupt-names = "int1"; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + vdd-supply = <&vdd>; + vddio-supply = <&vddio>; + mount-matrix = "0", "-1", "0", + "1", "0", "0", + "0", "0", "1"; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml index 0bce71529e34c3..1af0855c33e671 100644 --- a/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml +++ b/Documentation/devicetree/bindings/iio/imu/invensense,mpu6050.yaml @@ -86,7 +86,6 @@ unevaluatedProperties: false required: - compatible - reg - - interrupts examples: - | diff --git a/Documentation/devicetree/bindings/iio/light/capella,cm3605.yaml b/Documentation/devicetree/bindings/iio/light/capella,cm3605.yaml index c63b79c3351bfb..01376c386a0342 100644 --- a/Documentation/devicetree/bindings/iio/light/capella,cm3605.yaml +++ b/Documentation/devicetree/bindings/iio/light/capella,cm3605.yaml @@ -8,7 +8,7 @@ title: Capella Microsystems CM3605 Ambient Light and Short Distance Proximity Sensor maintainers: - - Linus Walleij + - Linus Walleij - Kevin Tsai description: | diff --git a/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml b/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml index f8a932be0d1037..99bddf31cbed2b 100644 --- a/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml +++ b/Documentation/devicetree/bindings/iio/light/sharp,gp2ap002.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Sharp GP2AP002A00F and GP2AP002S00F proximity and ambient light sensors maintainers: - - Linus Walleij + - Linus Walleij description: | Proximity and ambient light sensor with IR LED for the proximity diff --git a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8974.yaml b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8974.yaml index cefb70def1886b..f6b4d987419049 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8974.yaml +++ b/Documentation/devicetree/bindings/iio/magnetometer/asahi-kasei,ak8974.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Asahi Kasei AK8974 magnetometer sensor maintainers: - - Linus Walleij + - Linus Walleij properties: compatible: diff --git a/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml index 877226e9219bac..5cbf60f3b08b5b 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml +++ b/Documentation/devicetree/bindings/iio/magnetometer/yamaha,yas530.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Yamaha YAS530 family of magnetometer sensors maintainers: - - Linus Walleij + - Linus Walleij description: The Yamaha YAS530 magnetometers is a line of 3-axis magnetometers diff --git a/Documentation/devicetree/bindings/iio/pressure/aosong,adp810.yaml b/Documentation/devicetree/bindings/iio/pressure/aosong,adp810.yaml new file mode 100644 index 00000000000000..ad5f26ce504320 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/aosong,adp810.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/aosong,adp810.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: aosong adp810 differential pressure sensor + +maintainers: + - Akhilesh Patil + +description: + ADP810 is differential pressure and temperature sensor. It has I2C bus + interface with fixed address of 0x25. This sensor supports 8 bit CRC for + reliable data transfer. It can measure differential pressure in the + range -500 to 500Pa and temperate in the range -40 to +85 degree celsius. + +properties: + compatible: + enum: + - aosong,adp810 + + reg: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + pressure-sensor@25 { + compatible = "aosong,adp810"; + reg = <0x25>; + vdd-supply = <&vdd_regulator>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/pressure/fsl,mpl3115.yaml b/Documentation/devicetree/bindings/iio/pressure/fsl,mpl3115.yaml new file mode 100644 index 00000000000000..2933c2e10695e4 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/fsl,mpl3115.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/fsl,mpl3115.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MPL3115 precision pressure sensor with altimetry + +maintainers: + - Antoni Pokusinski + +description: | + MPL3115 is a pressure/altitude and temperature sensor with I2C interface. + It features two programmable interrupt lines which indicate events such as + data ready or pressure/temperature threshold reached. + https://www.nxp.com/docs/en/data-sheet/MPL3115A2.pdf + +properties: + compatible: + const: fsl,mpl3115 + + reg: + maxItems: 1 + + vdd-supply: true + + vddio-supply: true + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + maxItems: 2 + items: + enum: + - INT1 + - INT2 + + drive-open-drain: + type: boolean + description: + set if the specified interrupt pins should be configured as + open drain. If not set, defaults to push-pull. + +required: + - compatible + - reg + - vdd-supply + - vddio-supply + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pressure@60 { + compatible = "fsl,mpl3115"; + reg = <0x60>; + vdd-supply = <&vdd>; + vddio-supply = <&vddio>; + interrupt-parent = <&gpio1>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "INT2"; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml b/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml new file mode 100644 index 00000000000000..e5d1e6c4893936 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/infineon,dps310.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Infineon DPS310 barometric pressure and temperature sensor + +maintainers: + - Eddie James + +description: + The DPS310 is a barometric pressure and temperature sensor with an I2C + interface. + +properties: + compatible: + enum: + - infineon,dps310 + + reg: + maxItems: 1 + + "#io-channel-cells": + const: 0 + + vdd-supply: + description: + Voltage supply for the chip's analog blocks. + + vddio-supply: + description: + Digital voltage supply for the chip's digital blocks and I/O interface. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + dps: pressure-sensor@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + vdd-supply = <&vref1>; + vddio-supply = <&vref2>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml b/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml index c33640ddde5865..886f4129c301a3 100644 --- a/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml +++ b/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml @@ -12,7 +12,6 @@ maintainers: description: | Pressure sensor from Murata with SPI and I2C bus interfaces. - properties: compatible: const: murata,zpa2326 diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml index 48f22146316651..8fed45ee557bff 100644 --- a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml +++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml @@ -78,7 +78,6 @@ properties: minItems: 3 maxItems: 3 - semtech,ph01-resolution: $ref: /schemas/types.yaml#/definitions/uint32 enum: [8, 16, 32, 64, 128, 256, 512, 1024] diff --git a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml index e955eb8e879795..a1a958215cdb7e 100644 --- a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml +++ b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml @@ -14,7 +14,7 @@ description: The STMicroelectronics sensor devices are pretty straight-forward maintainers: - Denis Ciocca - - Linus Walleij + - Linus Walleij properties: compatible: diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml index 312febeeb3bba8..a22725f7619b79 100644 --- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml +++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml @@ -39,7 +39,6 @@ $defs: - reg - adi,sensor-type - properties: compatible: oneOf: @@ -88,7 +87,7 @@ properties: const: 0 patternProperties: - "^thermocouple@": + '^thermocouple@': $ref: '#/$defs/sensor-node' unevaluatedProperties: false @@ -146,7 +145,7 @@ patternProperties: required: - adi,custom-thermocouple - "^diode@": + '^diode@': $ref: '#/$defs/sensor-node' unevaluatedProperties: false @@ -191,7 +190,7 @@ patternProperties: $ref: /schemas/types.yaml#/definitions/uint32 default: 0 - "^rtd@": + '^rtd@': $ref: '#/$defs/sensor-node' unevaluatedProperties: false description: RTD sensor. @@ -280,7 +279,7 @@ patternProperties: type: boolean dependencies: - adi,current-rotate: [ "adi,rsense-share" ] + adi,current-rotate: [ 'adi,rsense-share' ] - if: properties: @@ -290,7 +289,7 @@ patternProperties: required: - adi,custom-rtd - "^thermistor@": + '^thermistor@': $ref: '#/$defs/sensor-node' unevaluatedProperties: false description: Thermistor sensor. @@ -364,7 +363,7 @@ patternProperties: - adi,rsense-handle dependencies: - adi,current-rotate: [ "adi,rsense-share" ] + adi,current-rotate: [ 'adi,rsense-share' ] allOf: - if: @@ -392,7 +391,7 @@ patternProperties: required: - adi,custom-thermistor - "^adc@": + '^adc@': $ref: '#/$defs/sensor-node' unevaluatedProperties: false description: Direct ADC sensor. @@ -407,7 +406,7 @@ patternProperties: description: Whether the sensor is single-ended. type: boolean - "^temp@": + '^temp@': $ref: '#/$defs/sensor-node' unevaluatedProperties: false description: Active analog temperature sensor. @@ -437,7 +436,7 @@ patternProperties: required: - adi,custom-temp - "^rsense@": + '^rsense@': $ref: '#/$defs/sensor-node' unevaluatedProperties: false description: Sense resistor sensor. @@ -476,7 +475,7 @@ allOf: - adi,ltc2984 then: patternProperties: - "^temp@": false + '^temp@': false examples: - | diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml index d79b254f1cde40..9bf07acea59994 100644 --- a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml +++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml @@ -8,7 +8,7 @@ title: Atmel maXTouch touchscreen/touchpad maintainers: - Nick Dyer - - Linus Walleij + - Linus Walleij description: | Atmel maXTouch touchscreen or touchpads such as the mXT244 diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.yaml b/Documentation/devicetree/bindings/input/cypress,cyapa.yaml index 29515151abe98e..da629d511da19e 100644 --- a/Documentation/devicetree/bindings/input/cypress,cyapa.yaml +++ b/Documentation/devicetree/bindings/input/cypress,cyapa.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Cypress All Points Addressable (APA) I2C Touchpad / Trackpad maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski properties: compatible: diff --git a/Documentation/devicetree/bindings/input/ti,drv266x.yaml b/Documentation/devicetree/bindings/input/ti,drv266x.yaml index da181882437385..1bce389d0e5c97 100644 --- a/Documentation/devicetree/bindings/input/ti,drv266x.yaml +++ b/Documentation/devicetree/bindings/input/ti,drv266x.yaml @@ -37,7 +37,6 @@ examples: - | #include - i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/input/ti,twl4030-keypad.yaml b/Documentation/devicetree/bindings/input/ti,twl4030-keypad.yaml new file mode 100644 index 00000000000000..c69aa7f5cca78f --- /dev/null +++ b/Documentation/devicetree/bindings/input/ti,twl4030-keypad.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/ti,twl4030-keypad.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TWL4030-family Keypad Controller + +maintainers: + - Peter Ujfalusi + +description: + TWL4030's Keypad controller is used to interface a SoC with a matrix-type + keypad device. The keypad controller supports multiple row and column lines. + A key can be placed at each intersection of a unique row and a unique column. + The keypad controller can sense a key-press and key-release and report the + event using a interrupt to the cpu. + +allOf: + - $ref: matrix-keymap.yaml# + +properties: + compatible: + const: ti,twl4030-keypad + + interrupts: + maxItems: 1 + +required: + - compatible + - interrupts + - keypad,num-rows + - keypad,num-columns + - linux,keymap + +unevaluatedProperties: false + +examples: + - | + #include + + keypad { + compatible = "ti,twl4030-keypad"; + interrupts = <1>; + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = < + /* row 0 */ + MATRIX_KEY(0, 0, KEY_1) + MATRIX_KEY(0, 1, KEY_2) + MATRIX_KEY(0, 2, KEY_3) + + /* ...and so on for a full 8x8 matrix... */ + + /* row 7 */ + MATRIX_KEY(7, 6, KEY_Y) + MATRIX_KEY(7, 7, KEY_Z) + >; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/ar1021.txt b/Documentation/devicetree/bindings/input/touchscreen/ar1021.txt deleted file mode 100644 index 82019bd6094ee3..00000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/ar1021.txt +++ /dev/null @@ -1,15 +0,0 @@ -* Microchip AR1020 and AR1021 touchscreen interface (I2C) - -Required properties: -- compatible : "microchip,ar1021-i2c" -- reg : I2C slave address -- interrupts : touch controller interrupt - -Example: - - touchscreen@4d { - compatible = "microchip,ar1021-i2c"; - reg = <0x4d>; - interrupt-parent = <&gpio3>; - interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs5xx.yaml b/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs5xx.yaml deleted file mode 100644 index b5f377215c0984..00000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs5xx.yaml +++ /dev/null @@ -1,75 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/input/touchscreen/azoteq,iqs5xx.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Azoteq IQS550/572/525 Trackpad/Touchscreen Controller - -maintainers: - - Jeff LaBundy - -description: | - The Azoteq IQS550, IQS572 and IQS525 trackpad and touchscreen controllers - employ projected-capacitance sensing and can track up to five independent - contacts. - - Link to datasheet: https://www.azoteq.com/ - -allOf: - - $ref: touchscreen.yaml# - -properties: - compatible: - enum: - - azoteq,iqs550 - - azoteq,iqs572 - - azoteq,iqs525 - - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - - reset-gpios: - maxItems: 1 - - wakeup-source: true - - touchscreen-size-x: true - touchscreen-size-y: true - touchscreen-inverted-x: true - touchscreen-inverted-y: true - touchscreen-swapped-x-y: true - -required: - - compatible - - reg - - interrupts - -additionalProperties: false - -examples: - - | - #include - #include - - i2c { - #address-cells = <1>; - #size-cells = <0>; - - touchscreen@74 { - compatible = "azoteq,iqs550"; - reg = <0x74>; - interrupt-parent = <&gpio>; - interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; - reset-gpios = <&gpio 22 (GPIO_ACTIVE_LOW | - GPIO_PUSH_PULL)>; - - touchscreen-size-x = <800>; - touchscreen-size-y = <480>; - }; - }; - -... diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml index 86a6d18f952a0c..afeab49a9544f1 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma140.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Cypress CY8CTMA140 series touchscreen controller maintainers: - - Linus Walleij + - Linus Walleij allOf: - $ref: touchscreen.yaml# diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml index 4dfbb93678b564..a0b8c12977a193 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,cy8ctma340.yaml @@ -12,7 +12,7 @@ description: The Cypress CY8CTMA340 series (also known as "CYTTSP" after maintainers: - Javier Martinez Canillas - - Linus Walleij + - Linus Walleij allOf: - $ref: touchscreen.yaml# diff --git a/Documentation/devicetree/bindings/input/touchscreen/himax,hx83112b.yaml b/Documentation/devicetree/bindings/input/touchscreen/himax,hx83112b.yaml deleted file mode 100644 index f5cfacb5e966d2..00000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/himax,hx83112b.yaml +++ /dev/null @@ -1,64 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/input/touchscreen/himax,hx83112b.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Himax hx83112b touchscreen controller - -maintainers: - - Job Noorman - -allOf: - - $ref: touchscreen.yaml# - -properties: - compatible: - enum: - - himax,hx83100a - - himax,hx83112b - - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - - reset-gpios: - maxItems: 1 - - touchscreen-inverted-x: true - touchscreen-inverted-y: true - touchscreen-size-x: true - touchscreen-size-y: true - touchscreen-swapped-x-y: true - -additionalProperties: false - -required: - - compatible - - reg - - interrupts - - reset-gpios - - touchscreen-size-x - - touchscreen-size-y - -examples: - - | - #include - #include - i2c { - #address-cells = <1>; - #size-cells = <0>; - touchscreen@48 { - compatible = "himax,hx83112b"; - reg = <0x48>; - interrupt-parent = <&tlmm>; - interrupts = <65 IRQ_TYPE_LEVEL_LOW>; - touchscreen-size-x = <1080>; - touchscreen-size-y = <2160>; - reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; - }; - }; - -... diff --git a/Documentation/devicetree/bindings/input/touchscreen/hynitron,cstxxx.yaml b/Documentation/devicetree/bindings/input/touchscreen/hynitron,cstxxx.yaml deleted file mode 100644 index 9cb5d4af00f755..00000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/hynitron,cstxxx.yaml +++ /dev/null @@ -1,65 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/input/touchscreen/hynitron,cstxxx.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Hynitron cstxxx series touchscreen controller - -description: | - Bindings for Hynitron cstxxx series multi-touch touchscreen - controllers. - -maintainers: - - Chris Morgan - -allOf: - - $ref: touchscreen.yaml# - -properties: - compatible: - enum: - - hynitron,cst340 - - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - - reset-gpios: - maxItems: 1 - - touchscreen-size-x: true - touchscreen-size-y: true - touchscreen-inverted-x: true - touchscreen-inverted-y: true - touchscreen-swapped-x-y: true - -additionalProperties: false - -required: - - compatible - - reg - - interrupts - - reset-gpios - -examples: - - | - #include - #include - i2c { - #address-cells = <1>; - #size-cells = <0>; - touchscreen@1a { - compatible = "hynitron,cst340"; - reg = <0x1a>; - interrupt-parent = <&gpio4>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; - touchscreen-size-x = <640>; - touchscreen-size-y = <480>; - }; - }; - -... diff --git a/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml deleted file mode 100644 index 9f732899975683..00000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml +++ /dev/null @@ -1,76 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/input/touchscreen/ilitek_ts_i2c.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Ilitek I2C Touchscreen Controller - -maintainers: - - Dmitry Torokhov - -allOf: - - $ref: touchscreen.yaml# - -properties: - compatible: - enum: - - ilitek,ili210x - - ilitek,ili2117 - - ilitek,ili2120 - - ilitek,ili2130 - - ilitek,ili2131 - - ilitek,ili2132 - - ilitek,ili2316 - - ilitek,ili2322 - - ilitek,ili2323 - - ilitek,ili2326 - - ilitek,ili251x - - ilitek,ili2520 - - ilitek,ili2521 - - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - - reset-gpios: - maxItems: 1 - - wakeup-source: - type: boolean - description: touchscreen can be used as a wakeup source. - - touchscreen-size-x: true - touchscreen-size-y: true - touchscreen-inverted-x: true - touchscreen-inverted-y: true - touchscreen-swapped-x-y: true - -additionalProperties: false - -required: - - compatible - - reg - - interrupts - -examples: - - | - #include - #include - i2c { - #address-cells = <1>; - #size-cells = <0>; - - touchscreen@41 { - compatible = "ilitek,ili2520"; - reg = <0x41>; - - interrupt-parent = <&gpio1>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; - touchscreen-inverted-y; - wakeup-source; - }; - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/maxim,max11801.yaml b/Documentation/devicetree/bindings/input/touchscreen/maxim,max11801.yaml deleted file mode 100644 index 4f528d22019924..00000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/maxim,max11801.yaml +++ /dev/null @@ -1,46 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/input/touchscreen/maxim,max11801.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: MAXI MAX11801 Resistive touch screen controller with i2c interface - -maintainers: - - Frank Li - -properties: - compatible: - const: maxim,max11801 - - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - -allOf: - - $ref: touchscreen.yaml - -required: - - compatible - - reg - - interrupts - -unevaluatedProperties: false - -examples: - - | - #include - - i2c { - #address-cells = <1>; - #size-cells = <0>; - - touchscreen@48 { - compatible = "maxim,max11801"; - reg = <0x48>; - interrupt-parent = <&gpio3>; - interrupts = <31 IRQ_TYPE_EDGE_FALLING>; - }; - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/melfas,mip4_ts.yaml b/Documentation/devicetree/bindings/input/touchscreen/melfas,mip4_ts.yaml new file mode 100644 index 00000000000000..314be65c56caad --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/melfas,mip4_ts.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/melfas,mip4_ts.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MELFAS MIP4 Touchscreen + +maintainers: + - Ariel D'Alessandro + +properties: + compatible: + const: melfas,mip4_ts + + reg: + description: I2C address of the chip (0x48 or 0x34) + maxItems: 1 + + interrupts: + maxItems: 1 + + ce-gpios: + description: + GPIO connected to the CE (chip enable) pin of the chip (active high) + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@34 { + compatible = "melfas,mip4_ts"; + reg = <0x34>; + + interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>; + ce-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&touchscreen_default>; + pinctrl-names = "default"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml b/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml index 90ebd4f8354c27..a8a93f755458b3 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Melfas MMS114 family touchscreen controller maintainers: - - Linus Walleij + - Linus Walleij allOf: - $ref: touchscreen.yaml# diff --git a/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt b/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt deleted file mode 100644 index b2ab5498e51900..00000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt +++ /dev/null @@ -1,20 +0,0 @@ -* MELFAS MIP4 Touchscreen - -Required properties: -- compatible: must be "melfas,mip4_ts" -- reg: I2C slave address of the chip (0x48 or 0x34) -- interrupts: interrupt to which the chip is connected - -Optional properties: -- ce-gpios: GPIO connected to the CE (chip enable) pin of the chip - -Example: - i2c@00000000 { - touchscreen: melfas_mip4@48 { - compatible = "melfas,mip4_ts"; - reg = <0x48>; - interrupt-parent = <&gpio>; - interrupts = <0 IRQ_TYPE_EDGE_FALLING>; - ce-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; - }; - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/semtech,sx8654.yaml b/Documentation/devicetree/bindings/input/touchscreen/semtech,sx8654.yaml deleted file mode 100644 index b2554064b6888b..00000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/semtech,sx8654.yaml +++ /dev/null @@ -1,52 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/input/touchscreen/semtech,sx8654.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Semtech SX8654 I2C Touchscreen Controller - -maintainers: - - Frank Li - -properties: - compatible: - enum: - - semtech,sx8650 - - semtech,sx8654 - - semtech,sx8655 - - semtech,sx8656 - - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - - reset-gpios: - maxItems: 1 - -required: - - compatible - - reg - - interrupts - -additionalProperties: false - -examples: - - | - #include - #include - - i2c { - #address-cells = <1>; - #size-cells = <0>; - - touchscreen@48 { - compatible = "semtech,sx8654"; - reg = <0x48>; - interrupt-parent = <&gpio6>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; - }; - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml index c593ae63d0eccc..12256ae7df90db 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: ST-Microelectronics FingerTip touchscreen controller maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: The ST-Microelectronics FingerTip device provides a basic touchscreen diff --git a/Documentation/devicetree/bindings/input/touchscreen/trivial-touch.yaml b/Documentation/devicetree/bindings/input/touchscreen/trivial-touch.yaml new file mode 100644 index 00000000000000..fa27c6754ca4e9 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/trivial-touch.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/trivial-touch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Trivial touch screen controller with i2c interface + +maintainers: + - Frank Li + +properties: + compatible: + enum: + # The Azoteq IQS550, IQS572 and IQS525 trackpad and touchscreen controllers + - azoteq,iqs550 + - azoteq,iqs572 + - azoteq,iqs525 + # Himax hx83100a touchscreen controller + - himax,hx83100a + # Himax hx83112b touchscreen controller + - himax,hx83112b + # Hynitron cstxxx series touchscreen controller + - hynitron,cst340 + # Ilitek I2C Touchscreen Controller + - ilitek,ili210x + - ilitek,ili2117 + - ilitek,ili2120 + - ilitek,ili2130 + - ilitek,ili2131 + - ilitek,ili2132 + - ilitek,ili2316 + - ilitek,ili2322 + - ilitek,ili2323 + - ilitek,ili2326 + - ilitek,ili251x + - ilitek,ili2520 + - ilitek,ili2521 + # MAXI MAX11801 Resistive touch screen controller with i2c interface + - maxim,max11801 + # Microchip AR1020 and AR1021 touchscreen interface (I2C) + - microchip,ar1021-i2c + # Trivial touch screen controller with i2c interface + - semtech,sx8650 + - semtech,sx8654 + - semtech,sx8655 + - semtech,sx8656 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + wakeup-source: true + +allOf: + - $ref: touchscreen.yaml + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@48 { + compatible = "maxim,max11801"; + reg = <0x48>; + interrupt-parent = <&gpio3>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml index 3f663ce3e44ece..f1ce837b16dfa8 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/zinitix,bt400.yaml @@ -12,7 +12,7 @@ description: The Zinitix BT4xx and BT5xx series of touchscreen controllers maintainers: - Michael Srba - - Linus Walleij + - Linus Walleij allOf: - $ref: touchscreen.yaml# diff --git a/Documentation/devicetree/bindings/input/twl4030-keypad.txt b/Documentation/devicetree/bindings/input/twl4030-keypad.txt deleted file mode 100644 index e4be2f76a717bc..00000000000000 --- a/Documentation/devicetree/bindings/input/twl4030-keypad.txt +++ /dev/null @@ -1,27 +0,0 @@ -* TWL4030's Keypad Controller device tree bindings - -TWL4030's Keypad controller is used to interface a SoC with a matrix-type -keypad device. The keypad controller supports multiple row and column lines. -A key can be placed at each intersection of a unique row and a unique column. -The keypad controller can sense a key-press and key-release and report the -event using a interrupt to the cpu. - -This binding is based on the matrix-keymap binding with the following -changes: - - * keypad,num-rows and keypad,num-columns are required. - -Required SoC Specific Properties: -- compatible: should be one of the following - - "ti,twl4030-keypad": For controllers compatible with twl4030 keypad - controller. -- interrupt: should be one of the following - - <1>: For controllers compatible with twl4030 keypad controller. - -Example: - twl_keypad: keypad { - compatible = "ti,twl4030-keypad"; - interrupts = <1>; - keypad,num-rows = <8>; - keypad,num-columns = <8>; - }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,kaanapali-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,kaanapali-rpmh.yaml new file mode 100644 index 00000000000000..2c3b2fd81a7456 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,kaanapali-rpmh.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,kaanapali-rpmh.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPMh Network-On-Chip Interconnect on Kaanapali + +maintainers: + - Raviteja Laggyshetty + +description: | + RPMh interconnect providers support system bandwidth requirements through + RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is + able to communicate with the BCM through the Resource State Coordinator (RSC) + associated with each execution environment. Provider nodes must point to at + least one RPMh device child node pertaining to their RSC and each provider + can map to multiple RPMh resources. + + See also: include/dt-bindings/interconnect/qcom,kaanapali-rpmh.h + +properties: + compatible: + enum: + - qcom,kaanapali-aggre-noc + - qcom,kaanapali-clk-virt + - qcom,kaanapali-cnoc-main + - qcom,kaanapali-cnoc-cfg + - qcom,kaanapali-gem-noc + - qcom,kaanapali-lpass-ag-noc + - qcom,kaanapali-lpass-lpiaon-noc + - qcom,kaanapali-lpass-lpicx-noc + - qcom,kaanapali-mc-virt + - qcom,kaanapali-mmss-noc + - qcom,kaanapali-nsp-noc + - qcom,kaanapali-pcie-anoc + - qcom,kaanapali-system-noc + + reg: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 3 + +required: + - compatible + +allOf: + - $ref: qcom,rpmh-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,kaanapali-clk-virt + - qcom,kaanapali-mc-virt + then: + properties: + reg: false + else: + required: + - reg + + - if: + properties: + compatible: + contains: + enum: + - qcom,kaanapali-pcie-anoc + then: + properties: + clocks: + items: + - description: aggre-NOC PCIe AXI clock + - description: cfg-NOC PCIe a-NOC AHB clock + + - if: + properties: + compatible: + contains: + enum: + - qcom,kaanapali-aggre-noc + then: + properties: + clocks: + items: + - description: aggre UFS PHY AXI clock + - description: aggre USB3 PRIM AXI clock + - description: RPMH CC IPA clock + + - if: + properties: + compatible: + contains: + enum: + - qcom,kaanapali-aggre-noc + - qcom,kaanapali-pcie-anoc + then: + required: + - clocks + else: + properties: + clocks: false + +unevaluatedProperties: false + +examples: + - | + clk_virt: interconnect-0 { + compatible = "qcom,kaanapali-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre_noc: interconnect@16e0000 { + compatible = "qcom,kaanapali-aggre-noc"; + reg = <0x016e0000 0x42400>; + #interconnect-cells = <2>; + clocks = <&gcc_aggre_ufs_phy_axi_clk>, + <&gcc_aggre_usb3_prim_axi_clk>, + <&rpmhcc_ipa_clk>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml index 256de140c03dc5..17b09292000e46 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Interconnect Bandwidth Monitor maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: | Bandwidth Monitor measures current throughput on buses between various NoC @@ -25,6 +25,7 @@ properties: - const: qcom,msm8998-bwmon # BWMON v4 - items: - enum: + - qcom,kaanapali-cpu-bwmon - qcom,qcm2290-cpu-bwmon - qcom,qcs615-cpu-bwmon - qcom,qcs8300-cpu-bwmon diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml index dad3ad2fd93b8c..da16d8e9bdc504 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml @@ -122,7 +122,6 @@ allOf: required: - reg - unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sa8775p-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sa8775p-rpmh.yaml index db19fd5c570865..71428d2cce1812 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,sa8775p-rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,sa8775p-rpmh.yaml @@ -33,18 +33,66 @@ properties: - qcom,sa8775p-pcie-anoc - qcom,sa8775p-system-noc + reg: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 5 + required: - compatible allOf: - $ref: qcom,rpmh-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,sa8775p-aggre1-noc + then: + properties: + clocks: + items: + - description: aggre UFS PHY AXI clock + - description: aggre QUP PRIM AXI clock + - description: aggre USB2 PRIM AXI clock + - description: aggre USB3 PRIM AXI clock + - description: aggre USB3 SEC AXI clock + + - if: + properties: + compatible: + contains: + enum: + - qcom,sa8775p-aggre2-noc + then: + properties: + clocks: + items: + - description: aggre UFS CARD AXI clock + - description: RPMH CC IPA clock unevaluatedProperties: false examples: - | - aggre1_noc: interconnect-aggre1-noc { + #include + clk_virt: interconnect-clk-virt { + compatible = "qcom,sa8775p-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16c0000 { compatible = "qcom,sa8775p-aggre1-noc"; + reg = <0x016c0000 0x18080>; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_QUPV3_AXI_CLK>, + <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>; }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml index 49eb156b08e0d1..2dc16e4293a9aa 100644 --- a/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml +++ b/Documentation/devicetree/bindings/interconnect/qcom,sm6350-rpmh.yaml @@ -12,9 +12,6 @@ maintainers: description: Qualcomm RPMh-based interconnect provider on SM6350. -allOf: - - $ref: qcom,rpmh-common.yaml# - properties: compatible: enum: @@ -30,7 +27,9 @@ properties: reg: maxItems: 1 - '#interconnect-cells': true + clocks: + minItems: 1 + maxItems: 2 patternProperties: '^interconnect-[a-z0-9\-]+$': @@ -46,8 +45,6 @@ patternProperties: - qcom,sm6350-clk-virt - qcom,sm6350-compute-noc - '#interconnect-cells': true - required: - compatible @@ -57,10 +54,54 @@ required: - compatible - reg +allOf: + - $ref: qcom,rpmh-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,sm6350-aggre1-noc + then: + properties: + clocks: + items: + - description: aggre UFS PHY AXI clock + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm6350-aggre2-noc + then: + properties: + clocks: + items: + - description: aggre USB3 PRIM AXI clock + - description: RPMH CC IPA clock + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm6350-aggre1-noc + - qcom,sm6350-aggre2-noc + then: + required: + - clocks + else: + properties: + clocks: false + unevaluatedProperties: false examples: - | + #include + #include + config_noc: interconnect@1500000 { compatible = "qcom,sm6350-config-noc"; reg = <0x01500000 0x28000>; @@ -68,14 +109,16 @@ examples: qcom,bcm-voters = <&apps_bcm_voter>; }; - system_noc: interconnect@1620000 { - compatible = "qcom,sm6350-system-noc"; - reg = <0x01620000 0x17080>; + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sm6350-aggre2-noc"; + reg = <0x01700000 0x1f880>; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&rpmhcc RPMH_IPA_CLK>; - clk_virt: interconnect-clk-virt { - compatible = "qcom,sm6350-clk-virt"; + compute_noc: interconnect-compute-noc { + compatible = "qcom,sm6350-compute-noc"; #interconnect-cells = <2>; qcom,bcm-voters = <&apps_bcm_voter>; }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml index 3d60d9e9e20813..d0fad930de9d9b 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.yaml @@ -39,6 +39,9 @@ properties: - amlogic,a4-gpio-ao-intc - amlogic,a5-gpio-intc - amlogic,c3-gpio-intc + - amlogic,s6-gpio-intc + - amlogic,s7-gpio-intc + - amlogic,s7d-gpio-intc - amlogic,t7-gpio-intc - const: amlogic,meson-gpio-intc diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml index f3247a47f9eedc..bfd30aae682bf3 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml @@ -305,7 +305,6 @@ examples: }; }; - device@0 { reg = <0 4>; interrupts = <1 1 4 &part0>; diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.yaml index 8d581b3aac3a1b..42ab873665e1e5 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: ARM Versatile FPGA IRQ Controller maintainers: - - Linus Walleij + - Linus Walleij description: One or more FPGA IRQ controllers can be synthesized in an ARM reference board diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml index 55636d06a67483..258d21fe6e359f 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml @@ -25,13 +25,14 @@ properties: interrupt-controller: true '#interrupt-cells': - const: 2 + const: 1 description: The first cell is the IRQ number, the second cell is the trigger type as defined in interrupt.txt in this directory. interrupts: - maxItems: 6 + minItems: 1 + maxItems: 10 description: | Depend to which INTC0 or INTC1 used. INTC0 and INTC1 are two kinds of interrupt controller with enable and raw @@ -53,7 +54,6 @@ properties: | |---... +---------+---module31 - required: - compatible - reg @@ -74,13 +74,17 @@ examples: interrupt-controller@12101b00 { compatible = "aspeed,ast2700-intc-ic"; reg = <0 0x12101b00 0 0x10>; - #interrupt-cells = <2>; + #interrupt-cells = <1>; interrupt-controller; interrupts = , , , , , - ; + , + , + , + , + ; }; }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.yaml index 5fda626c80ce39..2ff390c1705b86 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2836-l1-intc.yaml @@ -34,8 +34,6 @@ properties: required: - compatible - reg - - interrupt-controller - - '#interrupt-cells' additionalProperties: false diff --git a/Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.yaml b/Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.yaml index 980e5c45f25b1d..e6495acea038fa 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/faraday,ftintc010.yaml @@ -6,7 +6,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Faraday Technology FTINTC010 interrupt controller maintainers: - - Linus Walleij + - Linus Walleij description: This interrupt controller is a stock IP block from Faraday Technology found diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml index c49688be105819..5c768c1e159c1e 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.yaml @@ -20,6 +20,7 @@ properties: - fsl,imx8qm-irqsteer - fsl,imx8qxp-irqsteer - fsl,imx94-irqsteer + - fsl,imx95-irqsteer - const: fsl,imx-irqsteer reg: @@ -87,6 +88,7 @@ allOf: - fsl,imx8mp-irqsteer - fsl,imx8qm-irqsteer - fsl,imx8qxp-irqsteer + - fsl,imx95-irqsteer then: required: - power-domains diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,vf610-mscm-ir.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,vf610-mscm-ir.yaml index fdc254f8d013cc..55b1ae863b911f 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,vf610-mscm-ir.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,vf610-mscm-ir.yaml @@ -14,7 +14,6 @@ description: Vybrid SoC's but is only really useful in dual core configurations (VF6xx which comes with a Cortex-A5/Cortex-M4 combination). - maintainers: - Frank Li diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml index a02a6b5af20562..c375e08ba4104b 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Intel IXP4xx XScale Networking Processors Interrupt Controller maintainers: - - Linus Walleij + - Linus Walleij description: | This interrupt controller is found in the Intel IXP4xx processors. diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml index 60441f0c5d7211..f63b23f48d8e93 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml @@ -78,7 +78,6 @@ required: - '#interrupt-cells' - loongson,parent_int_map - unevaluatedProperties: false if: diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml index fdcb4d8db8185f..20dfffb34f0c60 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml @@ -18,7 +18,6 @@ description: flush command is executed. With CIRQ, MCUSYS can be completely turned off to improve the system power consumption without losing interrupts. - properties: compatible: items: diff --git a/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml b/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml index 4ff609faba3256..d943ea820cdd1f 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml @@ -26,7 +26,6 @@ properties: - mscc,ocelot-icpu-intr - mscc,serval-icpu-intr - '#interrupt-cells': const: 1 diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml index f683d696909b9d..388fc2c620c0b8 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml @@ -58,12 +58,15 @@ properties: - const: andestech,nceplic100 - items: - enum: + - anlogic,dr1v90-plic - canaan,k210-plic - eswin,eic7700-plic + - microchip,pic64gx-plic - sifive,fu540-c000-plic - spacemit,k1-plic - starfive,jh7100-plic - starfive,jh7110-plic + - tenstorrent,blackhole-plic - const: sifive,plic-1.0.0 - items: - enum: @@ -75,6 +78,9 @@ properties: - sophgo,sg2044-plic - thead,th1520-plic - const: thead,c900-plic + - items: + - const: ultrarisc,dp1000-plic + - const: ultrarisc,cp100-plic - items: - const: sifive,plic-1.0.0 - const: riscv,plic0 diff --git a/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-mswi.yaml b/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-mswi.yaml index d6fb08a54167f2..62fd220e126e65 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-mswi.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-mswi.yaml @@ -4,18 +4,23 @@ $id: http://devicetree.org/schemas/interrupt-controller/thead,c900-aclint-mswi.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Sophgo sg2042 CLINT Machine-level Software Interrupt Device +title: ACLINT Machine-level Software Interrupt Device maintainers: - Inochi Amaoto properties: compatible: - items: - - enum: - - sophgo,sg2042-aclint-mswi - - sophgo,sg2044-aclint-mswi - - const: thead,c900-aclint-mswi + oneOf: + - items: + - enum: + - sophgo,sg2042-aclint-mswi + - sophgo,sg2044-aclint-mswi + - const: thead,c900-aclint-mswi + - items: + - enum: + - anlogic,dr1v90-aclint-mswi + - const: nuclei,ux900-aclint-mswi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-sswi.yaml b/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-sswi.yaml index c1ab865fcd64f1..d02c6886283af7 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-sswi.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/thead,c900-aclint-sswi.yaml @@ -30,6 +30,10 @@ properties: - const: thead,c900-aclint-sswi - items: - const: mips,p8700-aclint-sswi + - items: + - enum: + - anlogic,dr1v90-aclint-sswi + - const: nuclei,ux900-aclint-sswi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu.yaml index 6e3d6e6d9e073d..61b30a7732ec07 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,omap4-wugen-mpu.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: TI OMAP4 Wake-up Generator maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: > All TI OMAP4/5 (and their derivatives) are interrupt controllers that route diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml index 89495f094d52bc..cdbd23b5c08c16 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml @@ -35,6 +35,8 @@ properties: - description: Qcom SoCs implementing "qcom,smmu-500" and "arm,mmu-500" items: - enum: + - qcom,glymur-smmu-500 + - qcom,kaanapali-smmu-500 - qcom,milos-smmu-500 - qcom,qcm2290-smmu-500 - qcom,qcs615-smmu-500 @@ -89,6 +91,8 @@ properties: - description: Qcom Adreno GPUs implementing "qcom,smmu-500" and "arm,mmu-500" items: - enum: + - qcom,glymur-smmu-500 + - qcom,kaanapali-smmu-500 - qcom,milos-smmu-500 - qcom,qcm2290-smmu-500 - qcom,qcs615-smmu-500 @@ -638,7 +642,6 @@ examples: <&smmu1 7>; }; - /* SMMU with stream matching */ smmu2: iommu@ba5f0000 { compatible = "arm,smmu-v1"; @@ -664,7 +667,6 @@ examples: iommus = <&smmu2 1 0x30>; }; - /* ARM MMU-500 with 10-bit stream ID input configuration */ smmu3: iommu@ba600000 { compatible = "arm,mmu-500", "arm,smmu-v2"; @@ -685,8 +687,6 @@ examples: /* bus whose child devices emit one unique 10-bit stream ID each, but may master through multiple SMMU TBUs */ iommu-map = <0 &smmu3 0 0x400>; - - }; - |+ diff --git a/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml index f49ed8ac4776eb..79c573c47b08ea 100644 --- a/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml +++ b/Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml @@ -82,6 +82,9 @@ properties: - mediatek,mt8188-iommu-vdo # generation two - mediatek,mt8188-iommu-vpp # generation two - mediatek,mt8188-iommu-infra # generation two + - mediatek,mt8189-iommu-apu # generation two + - mediatek,mt8189-iommu-infra # generation two + - mediatek,mt8189-iommu-mm # generation two - mediatek,mt8192-m4u # generation two - mediatek,mt8195-iommu-vdo # generation two - mediatek,mt8195-iommu-vpp # generation two @@ -128,6 +131,7 @@ properties: This is the mtk_m4u_id according to the HW. Specifies the mtk_m4u_id as defined in dt-binding/memory/mediatek,mt8188-memory-port.h for mt8188, + dt-binding/memory/mediatek,mt8189-memory-port.h for mt8189, dt-binding/memory/mt2701-larb-port.h for mt2701 and mt7623, dt-binding/memory/mt2712-larb-port.h for mt2712, dt-binding/memory/mt6779-larb-port.h for mt6779, @@ -164,6 +168,7 @@ allOf: - mediatek,mt8186-iommu-mm - mediatek,mt8188-iommu-vdo - mediatek,mt8188-iommu-vpp + - mediatek,mt8189-iommu-mm - mediatek,mt8192-m4u - mediatek,mt8195-iommu-vdo - mediatek,mt8195-iommu-vpp @@ -180,6 +185,7 @@ allOf: - mediatek,mt8186-iommu-mm - mediatek,mt8188-iommu-vdo - mediatek,mt8188-iommu-vpp + - mediatek,mt8189-iommu-mm - mediatek,mt8192-m4u - mediatek,mt8195-iommu-vdo - mediatek,mt8195-iommu-vpp @@ -208,6 +214,8 @@ allOf: contains: enum: - mediatek,mt8188-iommu-infra + - mediatek,mt8189-iommu-apu + - mediatek,mt8189-iommu-infra - mediatek,mt8195-iommu-infra then: diff --git a/Documentation/devicetree/bindings/iommu/qcom,iommu.yaml b/Documentation/devicetree/bindings/iommu/qcom,iommu.yaml index 3e5623edd207ab..93a48902531706 100644 --- a/Documentation/devicetree/bindings/iommu/qcom,iommu.yaml +++ b/Documentation/devicetree/bindings/iommu/qcom,iommu.yaml @@ -32,14 +32,18 @@ properties: - const: qcom,msm-iommu-v2 clocks: + minItems: 2 items: - description: Clock required for IOMMU register group access - description: Clock required for underlying bus access + - description: Clock required for Translation Buffer Unit access clock-names: + minItems: 2 items: - const: iface - const: bus + - const: tbu power-domains: maxItems: 1 diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt deleted file mode 100644 index 25f86da804b72e..00000000000000 --- a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt +++ /dev/null @@ -1,28 +0,0 @@ -* Aspeed BT (Block Transfer) IPMI interface - -The Aspeed SOCs (AST2400 and AST2500) are commonly used as BMCs -(BaseBoard Management Controllers) and the BT interface can be used to -perform in-band IPMI communication with their host. - -Required properties: - -- compatible : should be one of - "aspeed,ast2400-ibt-bmc" - "aspeed,ast2500-ibt-bmc" - "aspeed,ast2600-ibt-bmc" -- reg: physical address and size of the registers -- clocks: clock for the device - -Optional properties: - -- interrupts: interrupt generated by the BT interface. without an - interrupt, the driver will operate in poll mode. - -Example: - - ibt@1e789140 { - compatible = "aspeed,ast2400-ibt-bmc"; - reg = <0x1e789140 0x18>; - interrupts = <8>; - clocks = <&syscon ASPEED_CLK_GATE_LCLK>; - }; diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.yaml b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.yaml new file mode 100644 index 00000000000000..c4f7cdbbe16be6 --- /dev/null +++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-ibt-bmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aspeed Block Transfer (BT) IPMI interface + +maintainers: + - Joel Stanley + +properties: + compatible: + enum: + - aspeed,ast2400-ibt-bmc + - aspeed,ast2500-ibt-bmc + - aspeed,ast2600-ibt-bmc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + #include + + bt@1e789140 { + compatible = "aspeed,ast2400-ibt-bmc"; + reg = <0x1e789140 0x18>; + interrupts = <8>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; + }; diff --git a/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt b/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt deleted file mode 100644 index 4fda76e63396a0..00000000000000 --- a/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt +++ /dev/null @@ -1,40 +0,0 @@ -* Nuvoton NPCM KCS (Keyboard Controller Style) IPMI interface - -The Nuvoton SOCs (NPCM) are commonly used as BMCs -(Baseboard Management Controllers) and the KCS interface can be -used to perform in-band IPMI communication with their host. - -Required properties: -- compatible : should be one of - "nuvoton,npcm750-kcs-bmc" - "nuvoton,npcm845-kcs-bmc", "nuvoton,npcm750-kcs-bmc" -- interrupts : interrupt generated by the controller -- kcs_chan : The KCS channel number in the controller - -Example: - - lpc_kcs: lpc_kcs@f0007000 { - compatible = "nuvoton,npcm750-lpc-kcs", "simple-mfd", "syscon"; - reg = <0xf0007000 0x40>; - reg-io-width = <1>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0xf0007000 0x40>; - - kcs1: kcs1@0 { - compatible = "nuvoton,npcm750-kcs-bmc"; - reg = <0x0 0x40>; - interrupts = <0 9 4>; - kcs_chan = <1>; - status = "disabled"; - }; - - kcs2: kcs2@0 { - compatible = "nuvoton,npcm750-kcs-bmc"; - reg = <0x0 0x40>; - interrupts = <0 9 4>; - kcs_chan = <2>; - status = "disabled"; - }; - }; diff --git a/Documentation/devicetree/bindings/ipmi/nuvoton,npcm750-kcs-bmc.yaml b/Documentation/devicetree/bindings/ipmi/nuvoton,npcm750-kcs-bmc.yaml new file mode 100644 index 00000000000000..fc5df1c5e3bc17 --- /dev/null +++ b/Documentation/devicetree/bindings/ipmi/nuvoton,npcm750-kcs-bmc.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ipmi/nuvoton,npcm750-kcs-bmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NPCM KCS BMC + +maintainers: + - Avi Fishman + - Tomer Maimon + - Tali Perry + +description: + The Nuvoton SOCs (NPCM) are commonly used as BMCs (Baseboard Management + Controllers) and the KCS interface can be used to perform in-band IPMI + communication with their host. + +properties: + compatible: + oneOf: + - const: nuvoton,npcm750-kcs-bmc + - items: + - enum: + - nuvoton,npcm845-kcs-bmc + - const: nuvoton,npcm750-kcs-bmc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + kcs_chan: + description: The KCS channel number in the controller + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 3 + +required: + - compatible + - reg + - interrupts + - kcs_chan + +additionalProperties: false + +examples: + - | + kcs@0 { + compatible = "nuvoton,npcm750-kcs-bmc"; + reg = <0x0 0x40>; + interrupts = <9 4>; + kcs_chan = <1>; + }; diff --git a/Documentation/devicetree/bindings/leds/backlight/arc,arc2c0608.yaml b/Documentation/devicetree/bindings/leds/backlight/arc,arc2c0608.yaml new file mode 100644 index 00000000000000..786beced5590bb --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/arc,arc2c0608.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/arc,arc2c0608.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ArcticSand arc2c0608 LED driver + +description: | + The ArcticSand arc2c0608 LED driver provides ultra + efficient notebook backlighting. Optional properties not + specified will default to values in IC EPROM. + + Datasheet: + https://www.murata.com/-/media/webrenewal/products/power/power-semiconductor/overview/lineup/led-boost/arc2/arc2c0608.ashx. + +maintainers: + - Brian Dodge + +allOf: + - $ref: /schemas/leds/common.yaml + +properties: + compatible: + const: arc,arc2c0608 + + reg: + maxItems: 1 + + default-brightness: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 4095 + + led-sources: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: List of enabled channels + items: + enum: [0, 1, 2, 3, 4, 5] + minItems: 1 + uniqueItems: true + + arc,led-config-0: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Fading speed (period between intensity + steps) + + arc,led-config-1: + $ref: /schemas/types.yaml#/definitions/uint32 + description: If set, sets ILED_CONFIG register. Used for + fine tuning the maximum LED current. + + arc,dim-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + description: PWM mode frequency setting (bits [3:0] used) + + arc,comp-config: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Setting for register CONFIG_COMP which + controls internal resitances, feed forward freqs, + and initial VOUT at startup. Consult the datasheet. + + arc,filter-config: + $ref: /schemas/types.yaml#/definitions/uint32 + description: RC and PWM Filter settings. + Bit Assignment + 7654 3 2 1 0 + xxxx RCF1 RCF0 PWM1 PWM0 + RCF statuses PWM Filter Statues + 00 = OFF (default) 00 = OFF (default) + 01 = LOW 01 = 2 STEPS + 10 - MEDIUM 10 = 4 STEPS + 11 = HIGH 11 = 8 STEPS + + arc,trim-config: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Sets percentage increase of Maximum LED + Current. + 0x00 = 0% increase. + 0x20 = 20.2%. + 0x3F = 41.5% + + label: true + + linux,default-trigger: true + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@30 { + compatible = "arc,arc2c0608"; + reg = <0x30>; + default-brightness = <500>; + label = "lcd-backlight"; + linux,default-trigger = "backlight"; + led-sources = <0 1 2 5>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt deleted file mode 100644 index 230abdefd6e7be..00000000000000 --- a/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt +++ /dev/null @@ -1,33 +0,0 @@ -Binding for ArcticSand arc2c0608 LED driver - -Required properties: -- compatible: should be "arc,arc2c0608" -- reg: slave address - -Optional properties: -- default-brightness: brightness value on boot, value from: 0-4095 -- label: The name of the backlight device - See Documentation/devicetree/bindings/leds/common.txt -- led-sources: List of enabled channels from 0 to 5. - See Documentation/devicetree/bindings/leds/common.txt - -- arc,led-config-0: setting for register ILED_CONFIG_0 -- arc,led-config-1: setting for register ILED_CONFIG_1 -- arc,dim-freq: PWM mode frequence setting (bits [3:0] used) -- arc,comp-config: setting for register CONFIG_COMP -- arc,filter-config: setting for register FILTER_CONFIG -- arc,trim-config: setting for register IMAXTUNE - -Note: Optional properties not specified will default to values in IC EPROM - -Example: - -arc2c0608@30 { - compatible = "arc,arc2c0608"; - reg = <0x30>; - default-brightness = <500>; - label = "lcd-backlight"; - linux,default-trigger = "backlight"; - led-sources = <0 1 2 5>; -}; - diff --git a/Documentation/devicetree/bindings/leds/backlight/awinic,aw99706.yaml b/Documentation/devicetree/bindings/leds/backlight/awinic,aw99706.yaml new file mode 100644 index 00000000000000..f48ce7a3434da1 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/awinic,aw99706.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/backlight/awinic,aw99706.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Awinic AW99706 6-channel WLED Backlight Driver + +maintainers: + - Junjie Cao + +allOf: + - $ref: common.yaml# + +properties: + compatible: + const: awinic,aw99706 + + reg: + maxItems: 1 + + enable-gpios: + description: GPIO to use to enable/disable the backlight (HWEN pin). + maxItems: 1 + + awinic,dim-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + Select dimming mode of the device. + 0 = Bypass mode. + 1 = DC mode. + 2 = MIX mode(PWM at low brightness and DC at high brightness). + 3 = MIX-26k mode(MIX mode with different PWM frequency). + enum: [ 0, 1, 2, 3 ] + default: 1 + + awinic,sw-freq-hz: + description: Boost switching frequency in Hz. + enum: [ 300000, 400000, 500000, 600000, 660000, 750000, 850000, 1000000, + 1200000, 1330000, 1500000, 1700000 ] + default: 750000 + + awinic,sw-ilmt-microamp: + description: Switching current limitation in uA. + enum: [ 1500000, 2000000, 2500000, 3000000 ] + default: 3000000 + + awinic,iled-max-microamp: + description: Maximum LED current setting in uA. + minimum: 5000 + maximum: 50000 + multipleOf: 500 + default: 20000 + + awinic,uvlo-thres-microvolt: + description: UVLO(Under Voltage Lock Out) in uV. + enum: [ 2200000, 5000000 ] + default: 2200000 + + awinic,ramp-ctl: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + Select ramp control and filter of the device. + 0 = Fade in/fade out. + 1 = Light filter. + 2 = Medium filter. + 3 = Heavy filter. + enum: [ 0, 1, 2, 3 ] + default: 2 + +required: + - compatible + - reg + - enable-gpios + +unevaluatedProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + backlight@76 { + compatible = "awinic,aw99706"; + reg = <0x76>; + enable-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; + default-brightness = <2047>; + max-brightness = <4095>; + awinic,dim-mode = <1>; + awinic,sw-freq-hz = <750000>; + awinic,sw-ilmt-microamp = <3000000>; + awinic,uvlo-thres-microvolt = <2200000>; + awinic,iled-max-microamp = <20000>; + awinic,ramp-ctl = <2>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml index 73fa59e6218164..e7207eb2658425 100644 --- a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Kinetic Technologies KTD253 and KTD259 one-wire backlight maintainers: - - Linus Walleij + - Linus Walleij description: | The Kinetic Technologies KTD253 and KTD259 are white LED backlights diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml index 274f83288a92e7..f4e44b33f56d18 100644 --- a/Documentation/devicetree/bindings/leds/common.yaml +++ b/Documentation/devicetree/bindings/leds/common.yaml @@ -173,6 +173,12 @@ properties: led-max-microamp. $ref: /schemas/types.yaml#/definitions/uint32 + default-brightness: + description: + Brightness to be set if LED's default state is on. Used only during + initialization. If the option is not set then max brightness is used. + $ref: /schemas/types.yaml#/definitions/uint32 + panic-indicator: description: This property specifies that the LED should be used, if at all possible, diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.yaml b/Documentation/devicetree/bindings/leds/leds-pwm.yaml index 61b97e8bc36d08..6c4fcefbe25f9c 100644 --- a/Documentation/devicetree/bindings/leds/leds-pwm.yaml +++ b/Documentation/devicetree/bindings/leds/leds-pwm.yaml @@ -40,6 +40,13 @@ patternProperties: initialization. If the option is not set then max brightness is used. $ref: /schemas/types.yaml#/definitions/uint32 + enable-gpios: + description: + GPIO for LED hardware enable control. Set active when brightness is + non-zero and inactive when brightness is zero. + The GPIO default state follows the "default-state" property. + maxItems: 1 + required: - pwms - max-brightness diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml index 841a0229c472a4..c4b7e57b251845 100644 --- a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml +++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml @@ -13,6 +13,11 @@ description: > The Qualcomm Light Pulse Generator consists of three different hardware blocks; a ramp generator with lookup table (LUT), the light pulse generator and a three channel current sink. These blocks are found in a wide range of Qualcomm PMICs. + The light pulse generator (LPG) can also be used independently to output PWM + signal for standard PWM applications. In this scenario, the LPG output should + be routed to a specific PMIC GPIO by setting the GPIO pin mux to the special + functions indicated in the datasheet, the TRILED driver for the channel will + not be enabled in this configuration. properties: compatible: diff --git a/Documentation/devicetree/bindings/leds/qcom,pm8058-led.yaml b/Documentation/devicetree/bindings/leds/qcom,pm8058-led.yaml index fa03e73622d487..b409b2a8b5c5b6 100644 --- a/Documentation/devicetree/bindings/leds/qcom,pm8058-led.yaml +++ b/Documentation/devicetree/bindings/leds/qcom,pm8058-led.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm PM8058 PMIC LED maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: | The Qualcomm PM8058 contains an LED block for up to six LEDs:: three normal diff --git a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml index bcf0ad4ea57ea6..05250aefd38575 100644 --- a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml +++ b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml @@ -24,6 +24,7 @@ properties: - enum: - qcom,pm6150l-flash-led - qcom,pm660l-flash-led + - qcom,pm7550-flash-led - qcom,pm8150c-flash-led - qcom,pm8150l-flash-led - qcom,pm8350c-flash-led diff --git a/Documentation/devicetree/bindings/leds/register-bit-led.yaml b/Documentation/devicetree/bindings/leds/register-bit-led.yaml index 20930d327ae999..a6bafc96bd0c36 100644 --- a/Documentation/devicetree/bindings/leds/register-bit-led.yaml +++ b/Documentation/devicetree/bindings/leds/register-bit-led.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Register Bit LEDs maintainers: - - Linus Walleij + - Linus Walleij description: |+ Register bit leds are used with syscon multifunctional devices where single diff --git a/Documentation/devicetree/bindings/leds/regulator-led.yaml b/Documentation/devicetree/bindings/leds/regulator-led.yaml index 4ef7b96e9a086b..75ee87d4a78699 100644 --- a/Documentation/devicetree/bindings/leds/regulator-led.yaml +++ b/Documentation/devicetree/bindings/leds/regulator-led.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Regulator LEDs maintainers: - - Linus Walleij + - Linus Walleij description: | Regulator LEDs are powered by a single regulator such that they can diff --git a/Documentation/devicetree/bindings/leds/richtek,rt8515.yaml b/Documentation/devicetree/bindings/leds/richtek,rt8515.yaml index 68c328eec03bec..0356371a6b014a 100644 --- a/Documentation/devicetree/bindings/leds/richtek,rt8515.yaml +++ b/Documentation/devicetree/bindings/leds/richtek,rt8515.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Richtek RT8515 1.5A dual channel LED driver maintainers: - - Linus Walleij + - Linus Walleij description: | The Richtek RT8515 is a dual channel (two mode) LED driver that diff --git a/Documentation/devicetree/bindings/mailbox/apm,xgene-slimpro-mbox.yaml b/Documentation/devicetree/bindings/mailbox/apm,xgene-slimpro-mbox.yaml new file mode 100644 index 00000000000000..815f08d61de85f --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/apm,xgene-slimpro-mbox.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/apm,xgene-slimpro-mbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: APM X-Gene SLIMpro mailbox + +maintainers: + - Khuong Dinh + +description: + The APM X-Gene SLIMpro mailbox is used to communicate messages between + the ARM64 processors and the Cortex M3 (dubbed SLIMpro). It uses a simple + interrupt based door bell mechanism and can exchange simple messages using the + internal registers. + +properties: + compatible: + const: apm,xgene-slimpro-mbox + + reg: + maxItems: 1 + + interrupts: + items: + - description: mailbox channel 0 doorbell + - description: mailbox channel 1 doorbell + - description: mailbox channel 2 doorbell + - description: mailbox channel 3 doorbell + - description: mailbox channel 4 doorbell + - description: mailbox channel 5 doorbell + - description: mailbox channel 6 doorbell + - description: mailbox channel 7 doorbell + + '#mbox-cells': + description: Number of mailbox channel. + const: 1 + +required: + - compatible + - reg + - interrupts + - '#mbox-cells' + +additionalProperties: false + +examples: + - | + mailbox@10540000 { + compatible = "apm,xgene-slimpro-mbox"; + reg = <0x10540000 0xa000>; + #mbox-cells = <1>; + interrupts = <0x0 0x0 0x4>, + <0x0 0x1 0x4>, + <0x0 0x2 0x4>, + <0x0 0x3 0x4>, + <0x0 0x4 0x4>, + <0x0 0x5 0x4>, + <0x0 0x6 0x4>, + <0x0 0x7 0x4>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml index d9a4f4a02d7cb0..e45b661e8b411c 100644 --- a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml +++ b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml @@ -52,7 +52,6 @@ properties: - const: arm,mhu-doorbell - const: arm,primecell - reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml index 02f06314d85fe0..3828d77f6316f3 100644 --- a/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml +++ b/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml @@ -127,7 +127,6 @@ properties: - minimum: 0 maximum: 124 - '#mbox-cells': description: | It is always set to 2. The first argument in the consumers 'mboxes' diff --git a/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml b/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml index 8a1369df4ecb22..4ca0d5e49c791b 100644 --- a/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml +++ b/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml @@ -26,7 +26,6 @@ properties: - mediatek,mt8188-adsp-mbox - const: mediatek,mt8186-adsp-mbox - "#mbox-cells": const: 0 diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml index 615ed103b7e6f4..f40dc904832729 100644 --- a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml +++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml @@ -187,10 +187,10 @@ allOf: enum: - qcom,msm8916-apcs-kpss-global then: - $ref: "#/$defs/msm8916-apcs-clock-controller" + $ref: '#/$defs/msm8916-apcs-clock-controller' properties: clock-controller: - $ref: "#/$defs/msm8916-apcs-clock-controller" + $ref: '#/$defs/msm8916-apcs-clock-controller' - if: properties: @@ -199,10 +199,10 @@ allOf: enum: - qcom,msm8939-apcs-kpss-global then: - $ref: "#/$defs/msm8939-apcs-clock-controller" + $ref: '#/$defs/msm8939-apcs-clock-controller' properties: clock-controller: - $ref: "#/$defs/msm8939-apcs-clock-controller" + $ref: '#/$defs/msm8939-apcs-clock-controller' - if: properties: @@ -211,10 +211,10 @@ allOf: enum: - qcom,sdx55-apcs-gcc then: - $ref: "#/$defs/sdx55-apcs-clock-controller" + $ref: '#/$defs/sdx55-apcs-clock-controller' properties: clock-controller: - $ref: "#/$defs/sdx55-apcs-clock-controller" + $ref: '#/$defs/sdx55-apcs-clock-controller' - if: properties: @@ -223,10 +223,10 @@ allOf: enum: - qcom,ipq6018-apcs-apps-global then: - $ref: "#/$defs/ipq6018-apcs-clock-controller" + $ref: '#/$defs/ipq6018-apcs-clock-controller' properties: clock-controller: - $ref: "#/$defs/ipq6018-apcs-clock-controller" + $ref: '#/$defs/ipq6018-apcs-clock-controller' - if: properties: diff --git a/Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt b/Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt deleted file mode 100644 index e46451bb242f3d..00000000000000 --- a/Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt +++ /dev/null @@ -1,35 +0,0 @@ -The APM X-Gene SLIMpro mailbox is used to communicate messages between -the ARM64 processors and the Cortex M3 (dubbed SLIMpro). It uses a simple -interrupt based door bell mechanism and can exchange simple messages using the -internal registers. - -There are total of 8 interrupts in this mailbox. Each used for an individual -door bell (or mailbox channel). - -Required properties: -- compatible: Should be as "apm,xgene-slimpro-mbox". - -- reg: Contains the mailbox register address range. - -- interrupts: 8 interrupts must be from 0 to 7, interrupt 0 define the - the interrupt for mailbox channel 0 and interrupt 1 for - mailbox channel 1 and so likewise for the reminder. - -- #mbox-cells: only one to specify the mailbox channel number. - -Example: - -Mailbox Node: - mailbox: mailbox@10540000 { - compatible = "apm,xgene-slimpro-mbox"; - reg = <0x0 0x10540000 0x0 0xa000>; - #mbox-cells = <1>; - interrupts = <0x0 0x0 0x4>, - <0x0 0x1 0x4>, - <0x0 0x2 0x4>, - <0x0 0x3 0x4>, - <0x0 0x4 0x4>, - <0x0 0x5 0x4>, - <0x0 0x6 0x4>, - <0x0 0x7 0x4>, - }; diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml index fe83b5cb1278d5..04d6473d666f34 100644 --- a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml +++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.yaml @@ -142,7 +142,7 @@ patternProperties: - compatible - reg - reg-names - - "#mbox-cells" + - '#mbox-cells' - xlnx,ipi-id required: diff --git a/Documentation/devicetree/bindings/media/amphion,vpu.yaml b/Documentation/devicetree/bindings/media/amphion,vpu.yaml index 5a920d9e78c73e..fa18013d705d96 100644 --- a/Documentation/devicetree/bindings/media/amphion,vpu.yaml +++ b/Documentation/devicetree/bindings/media/amphion,vpu.yaml @@ -45,7 +45,6 @@ patternProperties: between driver and firmware. Implement via mailbox on driver. $ref: /schemas/mailbox/fsl,mu.yaml# - "^vpu-core@[0-9a-f]+$": description: Each core correspond a decoder or encoder, need to configure them diff --git a/Documentation/devicetree/bindings/media/arm,mali-c55.yaml b/Documentation/devicetree/bindings/media/arm,mali-c55.yaml new file mode 100644 index 00000000000000..fc4fcd19922aad --- /dev/null +++ b/Documentation/devicetree/bindings/media/arm,mali-c55.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/arm,mali-c55.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Mali-C55 Image Signal Processor + +maintainers: + - Daniel Scally + - Jacopo Mondi + +properties: + compatible: + const: arm,mali-c55 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: ISP Video Clock + - description: ISP AXI clock + - description: ISP AHB-lite clock + + clock-names: + items: + - const: vclk + - const: aclk + - const: hclk + + resets: + items: + - description: vclk domain reset + - description: aclk domain reset + - description: hclk domain reset + + reset-names: + items: + - const: vresetn + - const: aresetn + - const: hresetn + + port: + $ref: /schemas/graph.yaml#/properties/port + description: Input parallel video bus + + properties: + endpoint: + $ref: /schemas/graph.yaml#/properties/endpoint + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - reset-names + - port + +additionalProperties: false + +examples: + - | + #include + + isp@400000 { + compatible = "arm,mali-c55"; + reg = <0x400000 0x200000>; + clocks = <&clk 0>, <&clk 1>, <&clk 2>; + clock-names = "vclk", "aclk", "hclk"; + resets = <&resets 0>, <&resets 1>, <&resets 2>; + reset-names = "vresetn", "aresetn", "hresetn"; + interrupts = ; + + port { + isp_in: endpoint { + remote-endpoint = <&csi2_rx_out>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml b/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml index 511ac0d67a7f23..988a5b3a62bdeb 100644 --- a/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml +++ b/Documentation/devicetree/bindings/media/fsl,imx6q-vdoa.yaml @@ -16,7 +16,7 @@ maintainers: properties: compatible: - const: "fsl,imx6q-vdoa" + const: fsl,imx6q-vdoa reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml b/Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml index 2dc2829d42a033..f8d9889dbc21c2 100644 --- a/Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml +++ b/Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml @@ -154,7 +154,5 @@ examples: }; }; }; - - }; }; diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9719.yaml b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9719.yaml new file mode 100644 index 00000000000000..8e8d62436e0d0c --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9719.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/dongwoon,dw9719.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dongwoon Anatech DW9719 Voice Coil Motor (VCM) Controller + +maintainers: + - André Apitzsch + +description: + The Dongwoon DW9718S/9719/9761 is a single 10-bit digital-to-analog converter + with 100 mA output current sink capability, designed for linear control of + voice coil motors (VCM) in camera lenses. This chip provides a Smart Actuator + Control (SAC) mode intended for driving voice coil lenses in camera modules. + +properties: + compatible: + enum: + - dongwoon,dw9718s + - dongwoon,dw9719 + - dongwoon,dw9761 + - dongwoon,dw9800k + + reg: + maxItems: 1 + + vdd-supply: + description: VDD power supply + + dongwoon,sac-mode: + description: | + Slew Rate Control mode to use: direct, LSC (Linear Slope Control) or + SAC1-SAC6 (Smart Actuator Control). + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # Direct mode + - 1 # LSC mode + - 2 # SAC1 mode (operation time# 0.32 x Tvib) + - 3 # SAC2 mode (operation time# 0.48 x Tvib) + - 4 # SAC3 mode (operation time# 0.72 x Tvib) + - 5 # SAC4 mode (operation time# 1.20 x Tvib) + - 6 # SAC5 mode (operation time# 1.64 x Tvib) + - 7 # SAC6 mode (operation time# 1.88 x Tvib) + default: 4 + + dongwoon,vcm-prescale: + description: + Indication of VCM switching frequency dividing rate select. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - vdd-supply + +allOf: + - if: + properties: + compatible: + contains: + const: dongwoon,dw9718s + then: + properties: + dongwoon,vcm-prescale: + description: + The final frequency is 10 MHz divided by (value + 2). + maximum: 15 + default: 0 + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + actuator@c { + compatible = "dongwoon,dw9718s"; + reg = <0x0c>; + + vdd-supply = <&pm8937_l17>; + + dongwoon,sac-mode = <4>; + dongwoon,vcm-prescale = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/nxp,tda19971.yaml b/Documentation/devicetree/bindings/media/i2c/nxp,tda19971.yaml new file mode 100644 index 00000000000000..477e59316dfa42 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/nxp,tda19971.yaml @@ -0,0 +1,162 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/nxp,tda19971.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP TDA1997x HDMI receiver + +maintainers: + - Frank Li + +description: | + The TDA19971/73 are HDMI video receivers. + + The TDA19971 Video port output pins can be used as follows: + - RGB 8bit per color (24 bits total): R[11:4] B[11:4] G[11:4] + - YUV444 8bit per color (24 bits total): Y[11:4] Cr[11:4] Cb[11:4] + - YUV422 semi-planar 8bit per component (16 bits total): Y[11:4] CbCr[11:4] + - YUV422 semi-planar 10bit per component (20 bits total): Y[11:2] CbCr[11:2] + - YUV422 semi-planar 12bit per component (24 bits total): - Y[11:0] CbCr[11:0] + - YUV422 BT656 8bit per component (8 bits total): YCbCr[11:4] (2-cycles) + - YUV422 BT656 10bit per component (10 bits total): YCbCr[11:2] (2-cycles) + - YUV422 BT656 12bit per component (12 bits total): YCbCr[11:0] (2-cycles) + + The TDA19973 Video port output pins can be used as follows: + - RGB 12bit per color (36 bits total): R[11:0] B[11:0] G[11:0] + - YUV444 12bit per color (36 bits total): Y[11:0] Cb[11:0] Cr[11:0] + - YUV422 semi-planar 12bit per component (24 bits total): Y[11:0] CbCr[11:0] + - YUV422 BT656 12bit per component (12 bits total): YCbCr[11:0] (2-cycles) + + The Video port output pins are mapped via 4-bit 'pin groups' allowing + for a variety of connection possibilities including swapping pin order within + pin groups. The video_portcfg device-tree property consists of register mapping + pairs which map a chip-specific VP output register to a 4-bit pin group. If + the pin group needs to be bit-swapped you can use the *_S pin-group defines. + +properties: + compatible: + enum: + - nxp,tda19971 + - nxp,tda19973 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + DOVDD-supply: true + + DVDD-supply: true + + AVDD-supply: true + + '#sound-dai-cells': + const: 0 + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + nxp,vidout-portcfg: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 1 + maxItems: 4 + items: + items: + - description: Video Port control registers index. + maximum: 8 + minimum: 0 + - description: pin(pinswapped) groups + + description: + array of pairs mapping VP output pins to pin groups. + + nxp,audout-format: + enum: + - i2s + - spdif + + nxp,audout-width: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [8, 16, 24, 32] + description: + width of audio output data bus. + + nxp,audout-layout: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: + data layout (0=AP0 used, 1=AP0/AP1/AP2/AP3 used). + + nxp,audout-mclk-fs: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Multiplication factor between stream rate and codec mclk. + +required: + - compatible + - reg + - interrupts + - DOVDD-supply + - AVDD-supply + - DVDD-supply + +additionalProperties: false + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hdmi-receiver@48 { + compatible = "nxp,tda19971"; + reg = <0x48>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tda1997x>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + DOVDD-supply = <®_3p3v>; + AVDD-supply = <®_1p8v>; + DVDD-supply = <®_1p8v>; + /* audio */ + #sound-dai-cells = <0>; + nxp,audout-format = "i2s"; + nxp,audout-layout = <0>; + nxp,audout-width = <16>; + nxp,audout-mclk-fs = <128>; + /* + * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4] + * and Y[11:4] across 16bits in the same pixclk cycle. + */ + nxp,vidout-portcfg = + /* Y[11:8]<->VP[15:12]<->CSI_DATA[19:16] */ + < TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >, + /* Y[7:4]<->VP[11:08]<->CSI_DATA[15:12] */ + < TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >, + /* CbCc[11:8]<->VP[07:04]<->CSI_DATA[11:8] */ + < TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >, + /* CbCr[7:4]<->VP[03:00]<->CSI_DATA[7:4] */ + < TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >; + + port { + endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-width = <16>; + hsync-active = <1>; + vsync-active = <1>; + data-active = <1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/nxp,tda1997x.txt b/Documentation/devicetree/bindings/media/i2c/nxp,tda1997x.txt deleted file mode 100644 index e76167999d76c9..00000000000000 --- a/Documentation/devicetree/bindings/media/i2c/nxp,tda1997x.txt +++ /dev/null @@ -1,178 +0,0 @@ -Device-Tree bindings for the NXP TDA1997x HDMI receiver - -The TDA19971/73 are HDMI video receivers. - -The TDA19971 Video port output pins can be used as follows: - - RGB 8bit per color (24 bits total): R[11:4] B[11:4] G[11:4] - - YUV444 8bit per color (24 bits total): Y[11:4] Cr[11:4] Cb[11:4] - - YUV422 semi-planar 8bit per component (16 bits total): Y[11:4] CbCr[11:4] - - YUV422 semi-planar 10bit per component (20 bits total): Y[11:2] CbCr[11:2] - - YUV422 semi-planar 12bit per component (24 bits total): - Y[11:0] CbCr[11:0] - - YUV422 BT656 8bit per component (8 bits total): YCbCr[11:4] (2-cycles) - - YUV422 BT656 10bit per component (10 bits total): YCbCr[11:2] (2-cycles) - - YUV422 BT656 12bit per component (12 bits total): YCbCr[11:0] (2-cycles) - -The TDA19973 Video port output pins can be used as follows: - - RGB 12bit per color (36 bits total): R[11:0] B[11:0] G[11:0] - - YUV444 12bit per color (36 bits total): Y[11:0] Cb[11:0] Cr[11:0] - - YUV422 semi-planar 12bit per component (24 bits total): Y[11:0] CbCr[11:0] - - YUV422 BT656 12bit per component (12 bits total): YCbCr[11:0] (2-cycles) - -The Video port output pins are mapped via 4-bit 'pin groups' allowing -for a variety of connection possibilities including swapping pin order within -pin groups. The video_portcfg device-tree property consists of register mapping -pairs which map a chip-specific VP output register to a 4-bit pin group. If -the pin group needs to be bit-swapped you can use the *_S pin-group defines. - -Required Properties: - - compatible : - - "nxp,tda19971" for the TDA19971 - - "nxp,tda19973" for the TDA19973 - - reg : I2C slave address - - interrupts : The interrupt number - - DOVDD-supply : Digital I/O supply - - DVDD-supply : Digital Core supply - - AVDD-supply : Analog supply - - nxp,vidout-portcfg : array of pairs mapping VP output pins to pin groups. - -Optional Properties: - - nxp,audout-format : DAI bus format: "i2s" or "spdif". - - nxp,audout-width : width of audio output data bus (1-4). - - nxp,audout-layout : data layout (0=AP0 used, 1=AP0/AP1/AP2/AP3 used). - - nxp,audout-mclk-fs : Multiplication factor between stream rate and codec - mclk. - -The port node shall contain one endpoint child node for its digital -output video port, in accordance with the video interface bindings defined in -Documentation/devicetree/bindings/media/video-interfaces.txt. - -Optional Endpoint Properties: - The following three properties are defined in video-interfaces.txt and - are valid for the output parallel bus endpoint: - - hsync-active: Horizontal synchronization polarity. Defaults to active high. - - vsync-active: Vertical synchronization polarity. Defaults to active high. - - data-active: Data polarity. Defaults to active high. - -Examples: - - VP[15:0] connected to IMX6 CSI_DATA[19:4] for 16bit YUV422 - 16bit I2S layout0 with a 128*fs clock (A_WS, AP0, A_CLK pins) - hdmi-receiver@48 { - compatible = "nxp,tda19971"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_tda1997x>; - reg = <0x48>; - interrupt-parent = <&gpio1>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; - DOVDD-supply = <®_3p3v>; - AVDD-supply = <®_1p8v>; - DVDD-supply = <®_1p8v>; - /* audio */ - #sound-dai-cells = <0>; - nxp,audout-format = "i2s"; - nxp,audout-layout = <0>; - nxp,audout-width = <16>; - nxp,audout-mclk-fs = <128>; - /* - * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4] - * and Y[11:4] across 16bits in the same pixclk cycle. - */ - nxp,vidout-portcfg = - /* Y[11:8]<->VP[15:12]<->CSI_DATA[19:16] */ - < TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >, - /* Y[7:4]<->VP[11:08]<->CSI_DATA[15:12] */ - < TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >, - /* CbCc[11:8]<->VP[07:04]<->CSI_DATA[11:8] */ - < TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >, - /* CbCr[7:4]<->VP[03:00]<->CSI_DATA[7:4] */ - < TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >; - - port { - tda1997x_to_ipu1_csi0_mux: endpoint { - remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; - bus-width = <16>; - hsync-active = <1>; - vsync-active = <1>; - data-active = <1>; - }; - }; - }; - - VP[15:8] connected to IMX6 CSI_DATA[19:12] for 8bit BT656 - 16bit I2S layout0 with a 128*fs clock (A_WS, AP0, A_CLK pins) - hdmi-receiver@48 { - compatible = "nxp,tda19971"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_tda1997x>; - reg = <0x48>; - interrupt-parent = <&gpio1>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; - DOVDD-supply = <®_3p3v>; - AVDD-supply = <®_1p8v>; - DVDD-supply = <®_1p8v>; - /* audio */ - #sound-dai-cells = <0>; - nxp,audout-format = "i2s"; - nxp,audout-layout = <0>; - nxp,audout-width = <16>; - nxp,audout-mclk-fs = <128>; - /* - * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4] - * and Y[11:4] across 16bits in the same pixclk cycle. - */ - nxp,vidout-portcfg = - /* Y[11:8]<->VP[15:12]<->CSI_DATA[19:16] */ - < TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >, - /* Y[7:4]<->VP[11:08]<->CSI_DATA[15:12] */ - < TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >, - /* CbCc[11:8]<->VP[07:04]<->CSI_DATA[11:8] */ - < TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >, - /* CbCr[7:4]<->VP[03:00]<->CSI_DATA[7:4] */ - < TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >; - - port { - tda1997x_to_ipu1_csi0_mux: endpoint { - remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; - bus-width = <16>; - hsync-active = <1>; - vsync-active = <1>; - data-active = <1>; - }; - }; - }; - - VP[15:8] connected to IMX6 CSI_DATA[19:12] for 8bit BT656 - 16bit I2S layout0 with a 128*fs clock (A_WS, AP0, A_CLK pins) - hdmi-receiver@48 { - compatible = "nxp,tda19971"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_tda1997x>; - reg = <0x48>; - interrupt-parent = <&gpio1>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; - DOVDD-supply = <®_3p3v>; - AVDD-supply = <®_1p8v>; - DVDD-supply = <®_1p8v>; - /* audio */ - #sound-dai-cells = <0>; - nxp,audout-format = "i2s"; - nxp,audout-layout = <0>; - nxp,audout-width = <16>; - nxp,audout-mclk-fs = <128>; - /* - * The 8bpp BT656 mode outputs YCbCr[11:4] across 8bits over - * 2 pixclk cycles. - */ - nxp,vidout-portcfg = - /* YCbCr[11:8]<->VP[15:12]<->CSI_DATA[19:16] */ - < TDA1997X_VP24_V15_12 TDA1997X_R_CR_CBCR_11_8 >, - /* YCbCr[7:4]<->VP[11:08]<->CSI_DATA[15:12] */ - < TDA1997X_VP24_V11_08 TDA1997X_R_CR_CBCR_7_4 >, - - port { - tda1997x_to_ipu1_csi0_mux: endpoint { - remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; - bus-width = <16>; - hsync-active = <1>; - vsync-active = <1>; - data-active = <1>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml b/Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml index ebd95a8d9b2f18..4cb0f5aa13019a 100644 --- a/Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml +++ b/Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor with embedded SoC ISP maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski properties: compatible: diff --git a/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml b/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml index e563e35920c4aa..9df1e0f872f2d7 100644 --- a/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml +++ b/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S5K6A3(YX) raw image sensor maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: S5K6A3(YX) is a raw image sensor with MIPI CSI-2 and CCP2 image data diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx111.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx111.yaml new file mode 100644 index 00000000000000..20f48d5e9b2d8c --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx111.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/sony,imx111.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony IMX111 8MP CMOS Digital Image Sensor + +maintainers: + - Svyatoslav Ryhel + +description: + IMX111 sensor is a Sony CMOS active pixel digital image sensor with an active + array size of 2464H x 3280V. It is programmable through I2C interface. Image + data is sent through MIPI CSI-2, through 1 or 2 lanes. + +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + - $ref: /schemas/nvmem/nvmem-consumer.yaml# + +properties: + compatible: + const: sony,imx111 + + reg: + maxItems: 1 + + clocks: + description: EXTCLK with possible frequency from 6 to 54 MHz + maxItems: 1 + + reset-gpios: + maxItems: 1 + + iovdd-supply: + description: Digital IO power supply (1.8V) + + dvdd-supply: + description: Digital power supply (1.2V) + + avdd-supply: + description: Analog power supply (2.7V) + + port: + additionalProperties: false + $ref: /schemas/graph.yaml#/$defs/port-base + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + required: + - data-lanes + - link-frequencies + + required: + - endpoint + +required: + - compatible + - reg + - clocks + - port + +unevaluatedProperties: false + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@10 { + compatible = "sony,imx111"; + reg = <0x10>; + + clocks = <&imx111_clk>; + + iovdd-supply = <&camera_vddio_1v8>; + dvdd-supply = <&camera_vddd_1v2>; + avdd-supply = <&camera_vdda_2v7>; + + orientation = <1>; + rotation = <90>; + + nvmem = <&eeprom>; + flash-leds = <&led>; + lens-focus = <&vcm>; + + reset-gpios = <&gpio 84 GPIO_ACTIVE_LOW>; + + port { + imx111_output: endpoint { + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <542400000>; + remote-endpoint = <&csi_input>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/i2c/st,vd55g1.yaml b/Documentation/devicetree/bindings/media/i2c/st,vd55g1.yaml index 3c071e6fbea613..060ac6829b661d 100644 --- a/Documentation/devicetree/bindings/media/i2c/st,vd55g1.yaml +++ b/Documentation/devicetree/bindings/media/i2c/st,vd55g1.yaml @@ -25,7 +25,11 @@ allOf: properties: compatible: - const: st,vd55g1 + enum: + - st,vd55g1 + - st,vd65g4 + description: + VD55G1 is the monochrome variant, while VD65G4 is the color one. reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml b/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml index c9673391afdbde..0592d0b9af926b 100644 --- a/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml +++ b/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml @@ -70,7 +70,6 @@ properties: $ref: /schemas/graph.yaml#/properties/port description: Video port for the decoder output. - required: - port@0 - port@1 diff --git a/Documentation/devicetree/bindings/media/i2c/ti,tvp5150.txt b/Documentation/devicetree/bindings/media/i2c/ti,tvp5150.txt deleted file mode 100644 index 94b908ace53c80..00000000000000 --- a/Documentation/devicetree/bindings/media/i2c/ti,tvp5150.txt +++ /dev/null @@ -1,157 +0,0 @@ -* Texas Instruments TVP5150 and TVP5151 video decoders - -The TVP5150 and TVP5151 are video decoders that convert baseband NTSC and PAL -(and also SECAM in the TVP5151 case) video signals to either 8-bit 4:2:2 YUV -with discrete syncs or 8-bit ITU-R BT.656 with embedded syncs output formats. - -Required Properties: -==================== -- compatible: Value must be "ti,tvp5150". -- reg: I2C slave address. - -Optional Properties: -==================== -- pdn-gpios: Phandle for the GPIO connected to the PDN pin, if any. -- reset-gpios: Phandle for the GPIO connected to the RESETB pin, if any. - -The device node must contain one 'port' child node per device physical input -and output port, in accordance with the video interface bindings defined in -Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes -are numbered as follows - - Name Type Port - -------------------------------------- - AIP1A sink 0 - AIP1B sink 1 - Y-OUT src 2 - -The device node must contain at least one sink port and the src port. Each input -port must be linked to an endpoint defined in [1]. The port/connector layout is -as follows - -tvp-5150 port@0 (AIP1A) - endpoint@0 -----------> Comp0-Con port - endpoint@1 ------+----> Svideo-Con port -tvp-5150 port@1 (AIP1B) | - endpoint@1 ------+ - endpoint@0 -----------> Comp1-Con port -tvp-5150 port@2 - endpoint (video bitstream output at YOUT[0-7] parallel bus) - -Required Endpoint Properties for parallel synchronization on output port: -========================================================================= - -- hsync-active: Active state of the HSYNC signal. Must be <1> (HIGH). -- vsync-active: Active state of the VSYNC signal. Must be <1> (HIGH). -- field-even-active: Field signal level during the even field data - transmission. Must be <0>. - -Note: Do not specify any of these properties if you want to use the embedded - BT.656 synchronization. - -Optional Connector Properties: -============================== - -- sdtv-standards: Set the possible signals to which the hardware tries to lock - instead of using the autodetection mechanism. Please look at - [1] for more information. - -[1] Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml. - -Example - three input sources: -#include - -comp_connector_0 { - compatible = "composite-video-connector"; - label = "Composite0"; - sdtv-standards = ; /* limit to pal-m signals */ - - port { - composite0_to_tvp5150: endpoint { - remote-endpoint = <&tvp5150_to_composite0>; - }; - }; -}; - -comp_connector_1 { - compatible = "composite-video-connector"; - label = "Composite1"; - sdtv-standards = ; /* limit to ntsc-m signals */ - - port { - composite1_to_tvp5150: endpoint { - remote-endpoint = <&tvp5150_to_composite1>; - }; - }; -}; - -svideo_connector { - compatible = "svideo-connector"; - label = "S-Video"; - - port { - #address-cells = <1>; - #size-cells = <0>; - - svideo_luma_to_tvp5150: endpoint@0 { - reg = <0>; - remote-endpoint = <&tvp5150_to_svideo_luma>; - }; - - svideo_chroma_to_tvp5150: endpoint@1 { - reg = <1>; - remote-endpoint = <&tvp5150_to_svideo_chroma>; - }; - }; -}; - -&i2c2 { - tvp5150@5c { - compatible = "ti,tvp5150"; - reg = <0x5c>; - pdn-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>; - reset-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>; - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - tvp5150_to_composite0: endpoint@0 { - reg = <0>; - remote-endpoint = <&composite0_to_tvp5150>; - }; - - tvp5150_to_svideo_luma: endpoint@1 { - reg = <1>; - remote-endpoint = <&svideo_luma_to_tvp5150>; - }; - }; - - port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - tvp5150_to_composite1: endpoint@0 { - reg = <0>; - remote-endpoint = <&composite1_to_tvp5150>; - }; - - tvp5150_to_svideo_chroma: endpoint@1 { - reg = <1>; - remote-endpoint = <&svideo_chroma_to_tvp5150>; - }; - }; - - port@2 { - reg = <2>; - - tvp5150_1: endpoint { - remote-endpoint = <&ccdc_ep>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/media/i2c/ti,tvp5150.yaml b/Documentation/devicetree/bindings/media/i2c/ti,tvp5150.yaml new file mode 100644 index 00000000000000..382a29652a05dc --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ti,tvp5150.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ti,tvp5150.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TVP5150 and TVP5151 video decoders + +maintainers: + - Frank Li + +description: + The TVP5150 and TVP5151 are video decoders that convert baseband NTSC and PAL + (and also SECAM in the TVP5151 case) video signals to either 8-bit 4:2:2 YUV + with discrete syncs or 8-bit ITU-R BT.656 with embedded syncs output formats. + +properties: + compatible: + const: ti,tvp5150 + + reg: + maxItems: 1 + + pdn-gpios: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + sink port node, AIP1A + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + sink port node, AIP1B + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + port@2: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: + source port node, Y-OUT + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - port@2 + +additionalProperties: false + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + bridge@5c { + compatible = "ti,tvp5150"; + reg = <0x5c>; + pdn-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + endpoint@0 { + reg = <0>; + remote-endpoint = <&composite0_to_tvp5150>; + }; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&svideo_luma_to_tvp5150>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + endpoint@0 { + reg = <0>; + remote-endpoint = <&composite1_to_tvp5150>; + }; + + endpoint@1 { + reg = <1>; + remote-endpoint = <&svideo_chroma_to_tvp5150>; + }; + }; + + port@2 { + reg = <2>; + + endpoint { + remote-endpoint = <&ccdc_ep>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8173-mdp.yaml b/Documentation/devicetree/bindings/media/mediatek,mt8173-mdp.yaml new file mode 100644 index 00000000000000..8ca33a733c478a --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mt8173-mdp.yaml @@ -0,0 +1,169 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mt8173-mdp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT8173 Media Data Path + +maintainers: + - Ariel D'Alessandro + +description: + Media Data Path is used for scaling and color space conversion. + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt8173-mdp-rdma + - mediatek,mt8173-mdp-rsz + - mediatek,mt8173-mdp-wdma + - mediatek,mt8173-mdp-wrot + - items: + - const: mediatek,mt8173-mdp-rdma + - const: mediatek,mt8173-mdp + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + power-domains: + maxItems: 1 + + iommus: + maxItems: 1 + + mediatek,vpu: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to Mediatek Video Processor Unit for HW Codec encode/decode and + image processing. + +required: + - compatible + - reg + - clocks + - power-domains + +allOf: + - if: + properties: + compatible: + contains: + const: mediatek,mt8173-mdp-rdma + then: + properties: + clocks: + items: + - description: Main clock + - description: Mutex clock + else: + properties: + clocks: + items: + - description: Main clock + + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt8173-mdp-rdma + - mediatek,mt8173-mdp-wdma + - mediatek,mt8173-mdp-wrot + then: + required: + - iommus + + - if: + properties: + compatible: + contains: + const: mediatek,mt8173-mdp + then: + required: + - mediatek,vpu + +additionalProperties: false + +examples: + - | + #include + #include + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + mdp_rdma0: rdma@14001000 { + compatible = "mediatek,mt8173-mdp-rdma", + "mediatek,mt8173-mdp"; + reg = <0 0x14001000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RDMA0>, + <&mmsys CLK_MM_MUTEX_32K>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_RDMA0>; + mediatek,vpu = <&vpu>; + }; + + mdp_rdma1: rdma@14002000 { + compatible = "mediatek,mt8173-mdp-rdma"; + reg = <0 0x14002000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RDMA1>, + <&mmsys CLK_MM_MUTEX_32K>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_RDMA1>; + }; + + mdp_rsz0: rsz@14003000 { + compatible = "mediatek,mt8173-mdp-rsz"; + reg = <0 0x14003000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RSZ0>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; + }; + + mdp_rsz1: rsz@14004000 { + compatible = "mediatek,mt8173-mdp-rsz"; + reg = <0 0x14004000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RSZ1>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; + }; + + mdp_rsz2: rsz@14005000 { + compatible = "mediatek,mt8173-mdp-rsz"; + reg = <0 0x14005000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RSZ2>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; + }; + + mdp_wdma0: wdma@14006000 { + compatible = "mediatek,mt8173-mdp-wdma"; + reg = <0 0x14006000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_WDMA>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_WDMA>; + }; + + mdp_wrot0: wrot@14007000 { + compatible = "mediatek,mt8173-mdp-wrot"; + reg = <0 0x14007000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_WROT0>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_WROT0>; + }; + + mdp_wrot1: wrot@14008000 { + compatible = "mediatek,mt8173-mdp-wrot"; + reg = <0 0x14008000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_WROT1>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_WROT1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/mediatek-mdp.txt b/Documentation/devicetree/bindings/media/mediatek-mdp.txt deleted file mode 100644 index 253a93eabb5e55..00000000000000 --- a/Documentation/devicetree/bindings/media/mediatek-mdp.txt +++ /dev/null @@ -1,96 +0,0 @@ -* Mediatek Media Data Path - -Media Data Path is used for scaling and color space conversion. - -Required properties (controller node): -- compatible: "mediatek,mt8173-mdp" -- mediatek,vpu: the node of video processor unit, see - Documentation/devicetree/bindings/media/mediatek,mt8173-vpu.yaml for - details. - -Required properties (all function blocks, child node): -- compatible: Should be one of - "mediatek,mt8173-mdp-rdma" - read DMA - "mediatek,mt8173-mdp-rsz" - resizer - "mediatek,mt8173-mdp-wdma" - write DMA - "mediatek,mt8173-mdp-wrot" - write DMA with rotation -- reg: Physical base address and length of the function block register space -- clocks: device clocks, see - Documentation/devicetree/bindings/clock/clock-bindings.txt for details. -- power-domains: a phandle to the power domain, see - Documentation/devicetree/bindings/power/power_domain.txt for details. - -Required properties (DMA function blocks, child node): -- compatible: Should be one of - "mediatek,mt8173-mdp-rdma" - "mediatek,mt8173-mdp-wdma" - "mediatek,mt8173-mdp-wrot" -- iommus: should point to the respective IOMMU block with master port as - argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml - for details. - -Example: - mdp_rdma0: rdma@14001000 { - compatible = "mediatek,mt8173-mdp-rdma"; - "mediatek,mt8173-mdp"; - reg = <0 0x14001000 0 0x1000>; - clocks = <&mmsys CLK_MM_MDP_RDMA0>, - <&mmsys CLK_MM_MUTEX_32K>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - iommus = <&iommu M4U_PORT_MDP_RDMA0>; - mediatek,vpu = <&vpu>; - }; - - mdp_rdma1: rdma@14002000 { - compatible = "mediatek,mt8173-mdp-rdma"; - reg = <0 0x14002000 0 0x1000>; - clocks = <&mmsys CLK_MM_MDP_RDMA1>, - <&mmsys CLK_MM_MUTEX_32K>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - iommus = <&iommu M4U_PORT_MDP_RDMA1>; - }; - - mdp_rsz0: rsz@14003000 { - compatible = "mediatek,mt8173-mdp-rsz"; - reg = <0 0x14003000 0 0x1000>; - clocks = <&mmsys CLK_MM_MDP_RSZ0>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - }; - - mdp_rsz1: rsz@14004000 { - compatible = "mediatek,mt8173-mdp-rsz"; - reg = <0 0x14004000 0 0x1000>; - clocks = <&mmsys CLK_MM_MDP_RSZ1>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - }; - - mdp_rsz2: rsz@14005000 { - compatible = "mediatek,mt8173-mdp-rsz"; - reg = <0 0x14005000 0 0x1000>; - clocks = <&mmsys CLK_MM_MDP_RSZ2>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - }; - - mdp_wdma0: wdma@14006000 { - compatible = "mediatek,mt8173-mdp-wdma"; - reg = <0 0x14006000 0 0x1000>; - clocks = <&mmsys CLK_MM_MDP_WDMA>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - iommus = <&iommu M4U_PORT_MDP_WDMA>; - }; - - mdp_wrot0: wrot@14007000 { - compatible = "mediatek,mt8173-mdp-wrot"; - reg = <0 0x14007000 0 0x1000>; - clocks = <&mmsys CLK_MM_MDP_WROT0>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - iommus = <&iommu M4U_PORT_MDP_WROT0>; - }; - - mdp_wrot1: wrot@14008000 { - compatible = "mediatek,mt8173-mdp-wrot"; - reg = <0 0x14008000 0 0x1000>; - clocks = <&mmsys CLK_MM_MDP_WROT1>; - power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; - iommus = <&iommu M4U_PORT_MDP_WROT1>; - }; diff --git a/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml b/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml index f43b91984f0152..001a0d9b71e096 100644 --- a/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml +++ b/Documentation/devicetree/bindings/media/nxp,imx8-isi.yaml @@ -22,6 +22,7 @@ properties: - fsl,imx8mn-isi - fsl,imx8mp-isi - fsl,imx8ulp-isi + - fsl,imx91-isi - fsl,imx93-isi reg: @@ -66,7 +67,6 @@ required: - interrupts - clocks - clock-names - - fsl,blk-ctrl - ports allOf: @@ -77,6 +77,7 @@ allOf: enum: - fsl,imx8mn-isi - fsl,imx8ulp-isi + - fsl,imx91-isi - fsl,imx93-isi then: properties: @@ -109,6 +110,16 @@ allOf: - port@0 - port@1 + - if: + properties: + compatible: + not: + contains: + const: fsl,imx91-isi + then: + required: + - fsl,blk-ctrl + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml index 4cba42ba7cf72d..b5aca3d2cc5c2a 100644 --- a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml +++ b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml @@ -79,7 +79,6 @@ allOf: power-domains: minItems: 2 # Wrapper and 1 slot - additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/media/qcom,msm8939-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8939-camss.yaml new file mode 100644 index 00000000000000..77b389d76a437d --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,msm8939-camss.yaml @@ -0,0 +1,254 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/qcom,msm8939-camss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8939 Camera Subsystem (CAMSS) + +maintainers: + - Vincent Knecht + +description: + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms + +properties: + compatible: + const: qcom,msm8939-camss + + reg: + maxItems: 11 + + reg-names: + items: + - const: csiphy0 + - const: csiphy0_clk_mux + - const: csiphy1 + - const: csiphy1_clk_mux + - const: csid0 + - const: csid1 + - const: ispif + - const: csi_clk_mux + - const: vfe0 + - const: csid2 + - const: vfe0_vbif + + clocks: + maxItems: 24 + + clock-names: + items: + - const: top_ahb + - const: ispif_ahb + - const: csiphy0_timer + - const: csiphy1_timer + - const: csi0_ahb + - const: csi0 + - const: csi0_phy + - const: csi0_pix + - const: csi0_rdi + - const: csi1_ahb + - const: csi1 + - const: csi1_phy + - const: csi1_pix + - const: csi1_rdi + - const: ahb + - const: vfe0 + - const: csi_vfe0 + - const: vfe_ahb + - const: vfe_axi + - const: csi2_ahb + - const: csi2 + - const: csi2_phy + - const: csi2_pix + - const: csi2_rdi + + interrupts: + maxItems: 7 + + interrupt-names: + items: + - const: csiphy0 + - const: csiphy1 + - const: csid0 + - const: csid1 + - const: ispif + - const: vfe0 + - const: csid2 + + iommus: + maxItems: 1 + + power-domains: + items: + - description: VFE GDSC - Video Front End, Global Distributed Switch + Controller. + + vdda-supply: + description: + Definition of the regulator used as 1.2V analog power supply. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + description: + CSI input ports. + + patternProperties: + "^port@[0-1]$": + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + + description: + Input port for receiving CSI data. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + bus-type: + enum: + - 4 # MEDIA_BUS_TYPE_CSI2_DPHY + + required: + - data-lanes + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interrupts + - interrupt-names + - iommus + - power-domains + - vdda-supply + - ports + +additionalProperties: false + +examples: + - | + #include + #include + + isp@1b0ac00 { + compatible = "qcom,msm8939-camss"; + + reg = <0x01b0ac00 0x200>, + <0x01b00030 0x4>, + <0x01b0b000 0x200>, + <0x01b00038 0x4>, + <0x01b08000 0x100>, + <0x01b08400 0x100>, + <0x01b0a000 0x500>, + <0x01b00020 0x10>, + <0x01b10000 0x1000>, + <0x01b08800 0x100>, + <0x01b40000 0x200>; + + reg-names = "csiphy0", + "csiphy0_clk_mux", + "csiphy1", + "csiphy1_clk_mux", + "csid0", + "csid1", + "ispif", + "csi_clk_mux", + "vfe0", + "csid2", + "vfe0_vbif"; + + clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, + <&gcc GCC_CAMSS_ISPIF_AHB_CLK>, + <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>, + <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>, + <&gcc GCC_CAMSS_CSI0_AHB_CLK>, + <&gcc GCC_CAMSS_CSI0_CLK>, + <&gcc GCC_CAMSS_CSI0PHY_CLK>, + <&gcc GCC_CAMSS_CSI0PIX_CLK>, + <&gcc GCC_CAMSS_CSI0RDI_CLK>, + <&gcc GCC_CAMSS_CSI1_AHB_CLK>, + <&gcc GCC_CAMSS_CSI1_CLK>, + <&gcc GCC_CAMSS_CSI1PHY_CLK>, + <&gcc GCC_CAMSS_CSI1PIX_CLK>, + <&gcc GCC_CAMSS_CSI1RDI_CLK>, + <&gcc GCC_CAMSS_AHB_CLK>, + <&gcc GCC_CAMSS_VFE0_CLK>, + <&gcc GCC_CAMSS_CSI_VFE0_CLK>, + <&gcc GCC_CAMSS_VFE_AHB_CLK>, + <&gcc GCC_CAMSS_VFE_AXI_CLK>, + <&gcc GCC_CAMSS_CSI2_AHB_CLK>, + <&gcc GCC_CAMSS_CSI2_CLK>, + <&gcc GCC_CAMSS_CSI2PHY_CLK>, + <&gcc GCC_CAMSS_CSI2PIX_CLK>, + <&gcc GCC_CAMSS_CSI2RDI_CLK>; + + clock-names = "top_ahb", + "ispif_ahb", + "csiphy0_timer", + "csiphy1_timer", + "csi0_ahb", + "csi0", + "csi0_phy", + "csi0_pix", + "csi0_rdi", + "csi1_ahb", + "csi1", + "csi1_phy", + "csi1_pix", + "csi1_rdi", + "ahb", + "vfe0", + "csi_vfe0", + "vfe_ahb", + "vfe_axi", + "csi2_ahb", + "csi2", + "csi2_phy", + "csi2_pix", + "csi2_rdi"; + + interrupts = , + , + , + , + , + , + ; + + interrupt-names = "csiphy0", + "csiphy1", + "csid0", + "csid1", + "ispif", + "vfe0", + "csid2"; + + iommus = <&apps_iommu 3>; + + power-domains = <&gcc VFE_GDSC>; + + vdda-supply = <®_1v2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + csiphy1_ep: endpoint { + data-lanes = <0 2>; + remote-endpoint = <&sensor_ep>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml index d195f1bfb23d58..c99fe4106eee9d 100644 --- a/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml @@ -484,7 +484,6 @@ examples: "gcc_axi_hf", "gcc_axi_sf"; - iommus = <&apps_smmu 0x2000 0x4e0>, <&apps_smmu 0x2020 0x4e0>, <&apps_smmu 0x2040 0x4e0>, diff --git a/Documentation/devicetree/bindings/media/qcom,sm8650-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sm8650-camss.yaml new file mode 100644 index 00000000000000..9c8de722601ec5 --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,sm8650-camss.yaml @@ -0,0 +1,375 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/qcom,sm8650-camss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM8650 Camera Subsystem (CAMSS) + +maintainers: + - Vladimir Zapolskiy + +description: + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms. + +properties: + compatible: + const: qcom,sm8650-camss + + reg: + maxItems: 17 + + reg-names: + items: + - const: csid_wrapper + - const: csid0 + - const: csid1 + - const: csid2 + - const: csid_lite0 + - const: csid_lite1 + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: csiphy3 + - const: csiphy4 + - const: csiphy5 + - const: vfe0 + - const: vfe1 + - const: vfe2 + - const: vfe_lite0 + - const: vfe_lite1 + + clocks: + maxItems: 33 + + clock-names: + items: + - const: camnoc_axi + - const: cpas_ahb + - const: cpas_fast_ahb + - const: cpas_vfe0 + - const: cpas_vfe1 + - const: cpas_vfe2 + - const: cpas_vfe_lite + - const: csid + - const: csiphy0 + - const: csiphy0_timer + - const: csiphy1 + - const: csiphy1_timer + - const: csiphy2 + - const: csiphy2_timer + - const: csiphy3 + - const: csiphy3_timer + - const: csiphy4 + - const: csiphy4_timer + - const: csiphy5 + - const: csiphy5_timer + - const: csiphy_rx + - const: gcc_axi_hf + - const: qdss_debug_xo + - const: vfe0 + - const: vfe0_fast_ahb + - const: vfe1 + - const: vfe1_fast_ahb + - const: vfe2 + - const: vfe2_fast_ahb + - const: vfe_lite + - const: vfe_lite_ahb + - const: vfe_lite_cphy_rx + - const: vfe_lite_csid + + interrupts: + maxItems: 16 + + interrupt-names: + items: + - const: csid0 + - const: csid1 + - const: csid2 + - const: csid_lite0 + - const: csid_lite1 + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: csiphy3 + - const: csiphy4 + - const: csiphy5 + - const: vfe0 + - const: vfe1 + - const: vfe2 + - const: vfe_lite0 + - const: vfe_lite1 + + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: ahb + - const: hf_mnoc + + iommus: + maxItems: 3 + + power-domains: + items: + - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller. + - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller. + - description: IFE2 GDSC - Image Front End, Global Distributed Switch Controller. + - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller. + + power-domain-names: + items: + - const: ife0 + - const: ife1 + - const: ife2 + - const: top + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + description: + CSI input ports. + + patternProperties: + "^port@[0-5]$": + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + + description: + Input port for receiving CSI data from a CSIPHY. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + bus-type: + enum: + - 1 # MEDIA_BUS_TYPE_CSI2_CPHY + - 4 # MEDIA_BUS_TYPE_CSI2_DPHY + + required: + - data-lanes + + vdd-csiphy01-0p9-supply: + description: + Phandle to a 0.9V regulator supply to CSIPHY0 and CSIPHY1 IP blocks. + + vdd-csiphy01-1p2-supply: + description: + Phandle to a 1.2V regulator supply to CSIPHY0 and CSIPHY1 IP blocks. + + vdd-csiphy24-0p9-supply: + description: + Phandle to a 0.9V regulator supply to CSIPHY2 and CSIPHY4 IP blocks. + + vdd-csiphy24-1p2-supply: + description: + Phandle to a 1.2V regulator supply to CSIPHY2 and CSIPHY4 IP blocks. + + vdd-csiphy35-0p9-supply: + description: + Phandle to a 0.9V regulator supply to CSIPHY3 and CSIPHY5 IP blocks. + + vdd-csiphy35-1p2-supply: + description: + Phandle to a 1.2V regulator supply to CSIPHY3 and CSIPHY5 IP blocks. + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - interconnects + - interconnect-names + - interrupts + - interrupt-names + - iommus + - power-domains + - power-domain-names + +additionalProperties: false + +examples: + - | + #include + #include + #include + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + isp@acb6000 { + compatible = "qcom,sm8650-camss"; + reg = <0 0x0acb6000 0 0x1000>, + <0 0x0acb8000 0 0x1000>, + <0 0x0acba000 0 0x1000>, + <0 0x0acbc000 0 0x1000>, + <0 0x0accb000 0 0x1000>, + <0 0x0acd0000 0 0x1000>, + <0 0x0ace4000 0 0x2000>, + <0 0x0ace6000 0 0x2000>, + <0 0x0ace8000 0 0x2000>, + <0 0x0acea000 0 0x2000>, + <0 0x0acec000 0 0x2000>, + <0 0x0acee000 0 0x2000>, + <0 0x0ac62000 0 0xf000>, + <0 0x0ac71000 0 0xf000>, + <0 0x0ac80000 0 0xf000>, + <0 0x0accc000 0 0x2000>, + <0 0x0acd1000 0 0x2000>; + reg-names = "csid_wrapper", + "csid0", + "csid1", + "csid2", + "csid_lite0", + "csid_lite1", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "csiphy4", + "csiphy5", + "vfe0", + "vfe1", + "vfe2", + "vfe_lite0", + "vfe_lite1"; + clocks = <&camcc CAM_CC_CAMNOC_AXI_RT_CLK>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CPAS_FAST_AHB_CLK>, + <&camcc CAM_CC_CPAS_IFE_0_CLK>, + <&camcc CAM_CC_CPAS_IFE_1_CLK>, + <&camcc CAM_CC_CPAS_IFE_2_CLK>, + <&camcc CAM_CC_CPAS_IFE_LITE_CLK>, + <&camcc CAM_CC_CSID_CLK>, + <&camcc CAM_CC_CSIPHY0_CLK>, + <&camcc CAM_CC_CSI0PHYTIMER_CLK>, + <&camcc CAM_CC_CSI1PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY1_CLK>, + <&camcc CAM_CC_CSI2PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY2_CLK>, + <&camcc CAM_CC_CSI3PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY3_CLK>, + <&camcc CAM_CC_CSI4PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY4_CLK>, + <&camcc CAM_CC_CSI5PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY5_CLK>, + <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>, + <&gcc GCC_CAMERA_HF_AXI_CLK>, + <&camcc CAM_CC_QDSS_DEBUG_XO_CLK>, + <&camcc CAM_CC_IFE_0_CLK>, + <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>, + <&camcc CAM_CC_IFE_1_CLK>, + <&camcc CAM_CC_IFE_1_FAST_AHB_CLK>, + <&camcc CAM_CC_IFE_2_CLK>, + <&camcc CAM_CC_IFE_2_FAST_AHB_CLK>, + <&camcc CAM_CC_IFE_LITE_CLK>, + <&camcc CAM_CC_IFE_LITE_AHB_CLK>, + <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_LITE_CSID_CLK>; + clock-names = "camnoc_axi", + "cpas_ahb", + "cpas_fast_ahb", + "cpas_vfe0", + "cpas_vfe1", + "cpas_vfe2", + "cpas_vfe_lite", + "csid", + "csiphy0", + "csiphy0_timer", + "csiphy1", + "csiphy1_timer", + "csiphy2", + "csiphy2_timer", + "csiphy3", + "csiphy3_timer", + "csiphy4", + "csiphy4_timer", + "csiphy5", + "csiphy5_timer", + "csiphy_rx", + "gcc_axi_hf", + "qdss_debug_xo", + "vfe0", + "vfe0_fast_ahb", + "vfe1", + "vfe1_fast_ahb", + "vfe2", + "vfe2_fast_ahb", + "vfe_lite", + "vfe_lite_ahb", + "vfe_lite_cphy_rx", + "vfe_lite_csid"; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "csid0", + "csid1", + "csid2", + "csid_lite0", + "csid_lite1", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "csiphy4", + "csiphy5", + "vfe0", + "vfe1", + "vfe2", + "vfe_lite0", + "vfe_lite1"; + interconnects = <&gem_noc MASTER_APPSS_PROC 0 + &config_noc SLAVE_CAMERA_CFG 0>, + <&mmss_noc MASTER_CAMNOC_HF 0 + &mc_virt SLAVE_EBI1 0>; + interconnect-names = "ahb", "hf_mnoc"; + iommus = <&apps_smmu 0x800 0x20>, + <&apps_smmu 0x18a0 0x40>, + <&apps_smmu 0x1860 0x00>; + power-domains = <&camcc CAM_CC_IFE_0_GDSC>, + <&camcc CAM_CC_IFE_1_GDSC>, + <&camcc CAM_CC_IFE_2_GDSC>, + <&camcc CAM_CC_TITAN_TOP_GDSC>; + power-domain-names = "ife0", "ife1", "ife2", "top"; + vdd-csiphy01-0p9-supply = <&vreg_0p9>; + vdd-csiphy01-1p2-supply = <&vreg_1p2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + csiphy1_ep: endpoint { + data-lanes = <0 1>; + remote-endpoint = <&camera_sensor>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/qcom,sm8750-iris.yaml b/Documentation/devicetree/bindings/media/qcom,sm8750-iris.yaml index c9a0fcafe53fbd..c42d3470bdac79 100644 --- a/Documentation/devicetree/bindings/media/qcom,sm8750-iris.yaml +++ b/Documentation/devicetree/bindings/media/qcom,sm8750-iris.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm SM8750 SoC Iris video encoder and decoder maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: The Iris video processing unit on Qualcomm SM8750 SoC is a video encode and diff --git a/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml b/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml index b075341caafc16..b87a13479a4bf3 100644 --- a/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml +++ b/Documentation/devicetree/bindings/media/qcom,x1e80100-camss.yaml @@ -124,7 +124,7 @@ properties: vdd-csiphy-1p2-supply: description: - Phandle to 1.8V regulator supply to a PHY. + Phandle to 1.2V regulator supply to a PHY. ports: $ref: /schemas/graph.yaml#/properties/ports diff --git a/Documentation/devicetree/bindings/media/renesas,r9a09g057-ivc.yaml b/Documentation/devicetree/bindings/media/renesas,r9a09g057-ivc.yaml new file mode 100644 index 00000000000000..c09cbd8c9e3597 --- /dev/null +++ b/Documentation/devicetree/bindings/media/renesas,r9a09g057-ivc.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/renesas,r9a09g057-ivc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/V2H(P) Input Video Control Block + +maintainers: + - Daniel Scally + +description: + The IVC block is a module that takes video frames from memory and feeds them + to the Image Signal Processor for processing. + +properties: + compatible: + const: renesas,r9a09g057-ivc # RZ/V2H(P) + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Input Video Control block register access clock + - description: Video input data AXI bus clock + - description: ISP system clock + + clock-names: + items: + - const: reg + - const: axi + - const: isp + + power-domains: + maxItems: 1 + + resets: + items: + - description: Input Video Control block register access reset + - description: Video input data AXI bus reset + - description: ISP core reset + + reset-names: + items: + - const: reg + - const: axi + - const: isp + + port: + $ref: /schemas/graph.yaml#/properties/port + description: Output parallel video bus + + properties: + endpoint: + $ref: /schemas/graph.yaml#/properties/endpoint + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + - resets + - reset-names + - port + +additionalProperties: false + +examples: + - | + #include + #include + + isp-input@16040000 { + compatible = "renesas,r9a09g057-ivc"; + reg = <0x16040000 0x230>; + + clocks = <&cpg CPG_MOD 0xe3>, + <&cpg CPG_MOD 0xe4>, + <&cpg CPG_MOD 0xe5>; + clock-names = "reg", "axi", "isp"; + + power-domains = <&cpg>; + + resets = <&cpg 0xd4>, + <&cpg 0xd1>, + <&cpg 0xd3>; + reset-names = "reg", "axi", "isp"; + + interrupts = ; + + port { + ivc_out: endpoint { + remote-endpoint = <&isp_in>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/media/rockchip,px30-vip.yaml b/Documentation/devicetree/bindings/media/rockchip,px30-vip.yaml new file mode 100644 index 00000000000000..cc08ce94bef706 --- /dev/null +++ b/Documentation/devicetree/bindings/media/rockchip,px30-vip.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/rockchip,px30-vip.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip PX30 Video Input Processor (VIP) + +maintainers: + - Mehdi Djait + - Michael Riesch + +description: + The Rockchip PX30 Video Input Processor (VIP) receives the data from a camera + sensor or CCIR656 encoder and transfers it into system main memory by AXI bus. + +properties: + compatible: + const: rockchip,px30-vip + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: ACLK + - description: HCLK + - description: PCLK + + clock-names: + items: + - const: aclk + - const: hclk + - const: pclk + + resets: + items: + - description: AXI + - description: AHB + - description: PCLK IN + + reset-names: + items: + - const: axi + - const: ahb + - const: pclkin + + power-domains: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: input port on the parallel interface + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + bus-type: + enum: + - 5 # MEDIA_BUS_TYPE_PARALLEL + - 6 # MEDIA_BUS_TYPE_BT656 + + required: + - bus-type + + required: + - port@0 + +required: + - compatible + - reg + - interrupts + - clocks + - ports + +additionalProperties: false + +examples: + - | + #include + #include + #include + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + video-capture@ff490000 { + compatible = "rockchip,px30-vip"; + reg = <0x0 0xff490000 0x0 0x200>; + interrupts = ; + clocks = <&cru ACLK_CIF>, <&cru HCLK_CIF>, <&cru PCLK_CIF>; + clock-names = "aclk", "hclk", "pclk"; + power-domains = <&power PX30_PD_VI>; + resets = <&cru SRST_CIF_A>, <&cru SRST_CIF_H>, <&cru SRST_CIF_PCLKIN>; + reset-names = "axi", "ahb", "pclkin"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + cif_in: endpoint { + remote-endpoint = <&tw9900_out>; + bus-type = ; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/rockchip,rk3568-vicap.yaml b/Documentation/devicetree/bindings/media/rockchip,rk3568-vicap.yaml new file mode 100644 index 00000000000000..18cd0a5a531817 --- /dev/null +++ b/Documentation/devicetree/bindings/media/rockchip,rk3568-vicap.yaml @@ -0,0 +1,172 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/rockchip,rk3568-vicap.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip RK3568 Video Capture (VICAP) + +maintainers: + - Michael Riesch + +description: + The Rockchip RK3568 Video Capture (VICAP) block features a digital video + port (DVP, a parallel video interface) and a MIPI CSI-2 port. It receives + the data from camera sensors, video decoders, or other companion ICs and + transfers it into system main memory by AXI bus. + +properties: + compatible: + const: rockchip,rk3568-vicap + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: ACLK + - description: HCLK + - description: DCLK + - description: ICLK + + clock-names: + items: + - const: aclk + - const: hclk + - const: dclk + - const: iclk + + iommus: + maxItems: 1 + + resets: + items: + - description: ARST + - description: HRST + - description: DRST + - description: PRST + - description: IRST + + reset-names: + items: + - const: arst + - const: hrst + - const: drst + - const: prst + - const: irst + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: Phandle to general register file used for video input block control. + + power-domains: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: The digital video port (DVP, a parallel video interface). + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + bus-type: + enum: + - 5 # MEDIA_BUS_TYPE_PARALLEL + - 6 # MEDIA_BUS_TYPE_BT656 + + rockchip,dvp-clk-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + minimum: 0 + maximum: 127 + description: + Delay the DVP path clock input to align the sampling phase, + only valid in dual edge sampling mode. Delay is zero by + default and can be adjusted optionally. + + required: + - bus-type + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Port connected to the MIPI CSI-2 receiver output. + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - ports + +additionalProperties: false + +examples: + - | + #include + #include + #include + #include + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + vicap: video-capture@fdfe0000 { + compatible = "rockchip,rk3568-vicap"; + reg = <0x0 0xfdfe0000 0x0 0x200>; + interrupts = ; + assigned-clocks = <&cru DCLK_VICAP>; + assigned-clock-rates = <300000000>; + clocks = <&cru ACLK_VICAP>, <&cru HCLK_VICAP>, + <&cru DCLK_VICAP>, <&cru ICLK_VICAP_G>; + clock-names = "aclk", "hclk", "dclk", "iclk"; + iommus = <&vicap_mmu>; + power-domains = <&power RK3568_PD_VI>; + resets = <&cru SRST_A_VICAP>, <&cru SRST_H_VICAP>, + <&cru SRST_D_VICAP>, <&cru SRST_P_VICAP>, + <&cru SRST_I_VICAP>; + reset-names = "arst", "hrst", "drst", "prst", "irst"; + rockchip,grf = <&grf>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + vicap_dvp: port@0 { + reg = <0>; + + vicap_dvp_input: endpoint { + bus-type = ; + bus-width = <16>; + pclk-sample = ; + remote-endpoint = <&it6801_output>; + }; + }; + + vicap_mipi: port@1 { + reg = <1>; + + vicap_mipi_input: endpoint { + remote-endpoint = <&csi_output>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/rockchip,vdec.yaml b/Documentation/devicetree/bindings/media/rockchip,vdec.yaml index 96b6c89387683b..809fda45b3bd62 100644 --- a/Documentation/devicetree/bindings/media/rockchip,vdec.yaml +++ b/Documentation/devicetree/bindings/media/rockchip,vdec.yaml @@ -16,6 +16,7 @@ description: |- properties: compatible: oneOf: + - const: rockchip,rk3288-vdec - const: rockchip,rk3399-vdec - const: rockchip,rk3576-vdec - const: rockchip,rk3588-vdec diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml index dd6cc7ac1f7ca9..2ddca4167b0b59 100644 --- a/Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml +++ b/Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S5P/Exynos SoC series MIPI CSI-2 receiver (MIPI CSIS) maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski - Sylwester Nawrocki properties: diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml index 2ba27b230559b4..17ece4eb300c96 100644 --- a/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml +++ b/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S5P/Exynos SoC Fully Integrated Mobile Camera maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski - Sylwester Nawrocki description: diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml index 71d63bb9abb5f7..c8894358c46cda 100644 --- a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml +++ b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung Exynos4212/4412 SoC Imaging Subsystem (FIMC-IS) maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski - Sylwester Nawrocki description: @@ -111,7 +111,6 @@ patternProperties: reg: maxItems: 1 - clocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml index f80eca0a4f41a0..bda724897293d8 100644 --- a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml +++ b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung Exynos SoC series camera host interface (FIMC-LITE) maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski - Sylwester Nawrocki description: diff --git a/Documentation/devicetree/bindings/media/samsung,fimc.yaml b/Documentation/devicetree/bindings/media/samsung,fimc.yaml index 2a54379d95095e..1bfba84f8854ff 100644 --- a/Documentation/devicetree/bindings/media/samsung,fimc.yaml +++ b/Documentation/devicetree/bindings/media/samsung,fimc.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S5P/Exynos SoC Camera Subsystem (FIMC) maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski - Sylwester Nawrocki description: | diff --git a/Documentation/devicetree/bindings/media/samsung,s5c73m3.yaml b/Documentation/devicetree/bindings/media/samsung,s5c73m3.yaml index 1b75390fdaac70..1af5d7ac382c20 100644 --- a/Documentation/devicetree/bindings/media/samsung,s5c73m3.yaml +++ b/Documentation/devicetree/bindings/media/samsung,s5c73m3.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung S5C73M3 8Mp camera ISP maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski - Sylwester Nawrocki description: diff --git a/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml b/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml index e28d6ec56c0b5f..5c969e764d4f95 100644 --- a/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml +++ b/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml @@ -42,7 +42,6 @@ properties: reg: maxItems: 1 - required: - compatible - clocks diff --git a/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml b/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml index 510e94e9ca3a11..b7f6c87d0e06ae 100644 --- a/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml +++ b/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Synopsys DesignWare HDMI RX Controller maintainers: - - Shreeya Patel + - Dmitry Osipenko description: Synopsys DesignWare HDMI Input Controller preset on RK3588 SoCs diff --git a/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml b/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml index 4afa4a24b86855..b9f7d84f38c2e9 100644 --- a/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml +++ b/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml @@ -21,7 +21,6 @@ description: format and copy the result into a part or the whole of a destination image with a different color format. (TODO) - maintainers: - Dillon Min diff --git a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt deleted file mode 100644 index 880d4d70c9fd74..00000000000000 --- a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt +++ /dev/null @@ -1,88 +0,0 @@ -STMicroelectronics STi c8sectpfe binding -============================================ - -This document describes the c8sectpfe device bindings that is used to get transport -stream data into the SoC on the TS pins, and into DDR for further processing. - -It is typically used in conjunction with one or more demodulator and tuner devices -which converts from the RF to digital domain. Demodulators and tuners are usually -located on an external DVB frontend card connected to SoC TS input pins. - -Currently 7 TS input (tsin) channels are supported on the stih407 family SoC. - -Required properties (controller (parent) node): -- compatible : Should be "stih407-c8sectpfe" - -- reg : Address and length of register sets for each device in - "reg-names" - -- reg-names : The names of the register addresses corresponding to the - registers filled in "reg": - - c8sectpfe: c8sectpfe registers - - c8sectpfe-ram: c8sectpfe internal sram - -- clocks : phandle list of c8sectpfe clocks -- clock-names : should be "c8sectpfe" -See: Documentation/devicetree/bindings/clock/clock-bindings.txt - -- pinctrl-names : a pinctrl state named tsin%d-serial or tsin%d-parallel (where %d is tsin-num) - must be defined for each tsin child node. -- pinctrl-0 : phandle referencing pin configuration for this tsin configuration -See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - - -Required properties (tsin (child) node): - -- tsin-num : tsin id of the InputBlock (must be between 0 to 6) -- i2c-bus : phandle to the I2C bus DT node which the demodulators & tuners on this tsin channel are connected. -- reset-gpios : reset gpio for this tsin channel. - -Optional properties (tsin (child) node): - -- invert-ts-clk : Bool property to control sense of ts input clock (data stored on falling edge of clk). -- serial-not-parallel : Bool property to configure input bus width (serial on ts_data<7>). -- async-not-sync : Bool property to control if data is received in asynchronous mode - (all bits/bytes with ts_valid or ts_packet asserted are valid). - -- dvb-card : Describes the NIM card connected to this tsin channel. - -Example: - -/* stih410 SoC b2120 + b2004a + stv0367-pll(NIMB) + stv0367-tda18212 (NIMA) DT example) */ - - c8sectpfe@8a20000 { - compatible = "st,stih407-c8sectpfe"; - reg = <0x08a20000 0x10000>, <0x08a00000 0x4000>; - reg-names = "stfe", "stfe-ram"; - interrupts = , ; - interrupt-names = "stfe-error-irq", "stfe-idle-irq"; - pinctrl-0 = <&pinctrl_tsin0_serial>; - pinctrl-1 = <&pinctrl_tsin0_parallel>; - pinctrl-2 = <&pinctrl_tsin3_serial>; - pinctrl-3 = <&pinctrl_tsin4_serial_alt3>; - pinctrl-4 = <&pinctrl_tsin5_serial_alt1>; - pinctrl-names = "tsin0-serial", - "tsin0-parallel", - "tsin3-serial", - "tsin4-serial", - "tsin5-serial"; - clocks = <&clk_s_c0_flexgen CLK_PROC_STFE>; - clock-names = "c8sectpfe"; - - /* tsin0 is TSA on NIMA */ - tsin0: port@0 { - tsin-num = <0>; - serial-not-parallel; - i2c-bus = <&ssc2>; - reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>; - dvb-card = ; - }; - - tsin3: port@3 { - tsin-num = <3>; - serial-not-parallel; - i2c-bus = <&ssc3>; - reset-gpios = <&pio15 7 GPIO_ACTIVE_HIGH>; - dvb-card = ; - }; - }; diff --git a/Documentation/devicetree/bindings/media/video-interface-devices.yaml b/Documentation/devicetree/bindings/media/video-interface-devices.yaml index 3ad1590b04966f..a81d2a155fe668 100644 --- a/Documentation/devicetree/bindings/media/video-interface-devices.yaml +++ b/Documentation/devicetree/bindings/media/video-interface-devices.yaml @@ -128,7 +128,6 @@ properties: 0 degrees camera rotation: - Y-Rp ^ Y-Rc ! @@ -145,7 +144,6 @@ properties: 0 +-------------------------------------> 0 X-Rc - X-Rc 0 <------------------------------------+ 0 X-Rp 0 ! @@ -228,7 +226,6 @@ properties: V X-Rc - Example one - Webcam A camera module installed on the user facing part of a laptop screen @@ -273,7 +270,6 @@ properties: optical inversion, the two reference systems will not be aligned, with 'Rp' being rotated 180 degrees relatively to 'Rc': - X-Rc 0 <------------------------------------+ 0 ! diff --git a/Documentation/devicetree/bindings/media/video-interfaces.yaml b/Documentation/devicetree/bindings/media/video-interfaces.yaml index 038e85b45befaf..6ed4695cacf7eb 100644 --- a/Documentation/devicetree/bindings/media/video-interfaces.yaml +++ b/Documentation/devicetree/bindings/media/video-interfaces.yaml @@ -95,7 +95,7 @@ properties: - 6 # BT.656 - 7 # DPI description: - Data bus type. + Data bus type. See include/dt-bindings/media/video-interfaces.h. bus-width: $ref: /schemas/types.yaml#/definitions/uint32 @@ -229,7 +229,7 @@ properties: Imaging. The length of the array must be the same length as the data-lanes property. If the line-orders property is omitted, the value shall be interpreted as 0 (ABC). This property is valid for CSI-2 C-PHY - busses only. + busses only. See include/dt-bindings/media/video-interfaces.h. strobe: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-bus-controller.yaml b/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-bus-controller.yaml index 3049d6bb0b1fe6..2a4bf905a36984 100644 --- a/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-bus-controller.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-bus-controller.yaml @@ -12,7 +12,7 @@ description: | including IXP42x, IXP43x, IXP45x and IXP46x. maintainers: - - Linus Walleij + - Linus Walleij properties: $nodename: diff --git a/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml b/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml index d1479a7b9c8df4..020fa49c345441 100644 --- a/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml @@ -12,7 +12,7 @@ description: including IXP42x, IXP43x, IXP45x and IXP46x. maintainers: - - Linus Walleij + - Linus Walleij properties: intel,ixp4xx-eb-t1: diff --git a/Documentation/devicetree/bindings/memory-controllers/qcom,ebi2-peripheral-props.yaml b/Documentation/devicetree/bindings/memory-controllers/qcom,ebi2-peripheral-props.yaml index 29f8c30e8a88a3..aec88cd2df76de 100644 --- a/Documentation/devicetree/bindings/memory-controllers/qcom,ebi2-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/memory-controllers/qcom,ebi2-peripheral-props.yaml @@ -62,7 +62,6 @@ properties: minimum: 0 maximum: 15 - # FAST chip selects qcom,xmem-address-hold-enable: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/mfd/apple,smc.yaml b/Documentation/devicetree/bindings/mfd/apple,smc.yaml index 5429538f7e2e91..0410e712c900a7 100644 --- a/Documentation/devicetree/bindings/mfd/apple,smc.yaml +++ b/Documentation/devicetree/bindings/mfd/apple,smc.yaml @@ -46,6 +46,9 @@ properties: reboot: $ref: /schemas/power/reset/apple,smc-reboot.yaml + rtc: + $ref: /schemas/rtc/apple,smc-rtc.yaml + additionalProperties: false required: @@ -80,5 +83,11 @@ examples: nvmem-cell-names = "shutdown_flag", "boot_stage", "boot_error_count", "panic_count"; }; + + rtc { + compatible = "apple,smc-rtc"; + nvmem-cells = <&rtc_offset>; + nvmem-cell-names = "rtc_offset"; + }; }; }; diff --git a/Documentation/devicetree/bindings/mfd/arm,dev-platforms-syscon.yaml b/Documentation/devicetree/bindings/mfd/arm,dev-platforms-syscon.yaml index 46b164ae083157..7f3b1b77293c5b 100644 --- a/Documentation/devicetree/bindings/mfd/arm,dev-platforms-syscon.yaml +++ b/Documentation/devicetree/bindings/mfd/arm,dev-platforms-syscon.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Arm Ltd Developer Platforms System Controllers maintainers: - - Linus Walleij + - Linus Walleij description: The Arm Ltd Integrator, Realview, and Versatile families of developer diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml index f329223cec071d..cbc3a2485a2fe8 100644 --- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml @@ -48,16 +48,16 @@ properties: reg: maxItems: 1 - "#address-cells": + '#address-cells': const: 1 - "#size-cells": + '#size-cells': const: 1 ranges: true patternProperties: - "^lpc-ctrl@[0-9a-f]+$": + '^lpc-ctrl@[0-9a-f]+$': type: object additionalProperties: false @@ -92,7 +92,7 @@ patternProperties: - compatible - clocks - "^reset-controller@[0-9a-f]+$": + '^reset-controller@[0-9a-f]+$': type: object additionalProperties: false @@ -118,7 +118,7 @@ patternProperties: - compatible - '#reset-cells' - "^lpc-snoop@[0-9a-f]+$": + '^lpc-snoop@[0-9a-f]+$': type: object additionalProperties: false @@ -152,15 +152,15 @@ patternProperties: - interrupts - snoop-ports - "^uart-routing@[0-9a-f]+$": + '^uart-routing@[0-9a-f]+$': $ref: /schemas/soc/aspeed/uart-routing.yaml# description: The UART routing control under LPC register space required: - compatible - reg - - "#address-cells" - - "#size-cells" + - '#address-cells' + - '#size-cells' - ranges additionalProperties: diff --git a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt b/Documentation/devicetree/bindings/mfd/da9052-i2c.txt deleted file mode 100644 index 07c69c0c6624ce..00000000000000 --- a/Documentation/devicetree/bindings/mfd/da9052-i2c.txt +++ /dev/null @@ -1,67 +0,0 @@ -* Dialog DA9052/53 Power Management Integrated Circuit (PMIC) - -Required properties: -- compatible : Should be "dlg,da9052", "dlg,da9053-aa", - "dlg,da9053-ab", or "dlg,da9053-bb" - -Optional properties: -- dlg,tsi-as-adc : Boolean, if set the X+, X-, Y+, Y- touchscreen - input lines are used as general purpose analogue - input. -- tsiref-supply: Phandle to the regulator, which provides the reference - voltage for the TSIREF pin. Must be provided when the - touchscreen pins are used for ADC purposes. - -Sub-nodes: -- regulators : Contain the regulator nodes. The DA9052/53 regulators are - bound using their names as listed below: - - buck1 : regulator BUCK CORE - buck2 : regulator BUCK PRO - buck3 : regulator BUCK MEM - buck4 : regulator BUCK PERI - ldo1 : regulator LDO1 - ldo2 : regulator LDO2 - ldo3 : regulator LDO3 - ldo4 : regulator LDO4 - ldo5 : regulator LDO5 - ldo6 : regulator LDO6 - ldo7 : regulator LDO7 - ldo8 : regulator LDO8 - ldo9 : regulator LDO9 - ldo10 : regulator LDO10 - - The bindings details of individual regulator device can be found in: - Documentation/devicetree/bindings/regulator/regulator.txt - -Examples: - -i2c@63fc8000 { /* I2C1 */ - - pmic: dialog@48 { - compatible = "dlg,da9053-aa"; - reg = <0x48>; - - regulators { - buck1 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <2075000>; - }; - - buck2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <2075000>; - }; - - buck3 { - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <2500000>; - }; - - buck4 { - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <2500000>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/mfd/dlg,da9052.yaml b/Documentation/devicetree/bindings/mfd/dlg,da9052.yaml new file mode 100644 index 00000000000000..1103a8cc5cea49 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/dlg,da9052.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/dlg,da9052.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dialog DA9052/53 Power Management Integrated Circuit (PMIC) + +maintainers: + - Frank Li + +properties: + compatible: + oneOf: + - enum: + - dlg,da9053-aa + - dlg,da9053-ab + - dlg,da9053-bb + - dlg,da9053-bc + - dlg,da9052 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + dlg,tsi-as-adc: + type: boolean + description: + if set the X+, X-, Y+, Y- touchscreen input lines are used as general + purpose analogue input. + + tsiref-supply: + description: The reference voltage for the TSIREF pin. + + regulators: + type: object + additionalProperties: false + + patternProperties: + "^(ldo([1-9]|10)|buck[1-4])$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - regulators + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@48 { + compatible = "dlg,da9053-aa"; + reg = <0x48>; + + regulators { + buck1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2075000>; + }; + + buck2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2075000>; + }; + + buck3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <2500000>; + }; + + buck4 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <2500000>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml index 51612dc22748fc..4f08e9ac7e5643 100644 --- a/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml +++ b/Documentation/devicetree/bindings/mfd/dlg,da9063.yaml @@ -81,6 +81,8 @@ properties: watchdog: $ref: /schemas/watchdog/dlg,da9062-watchdog.yaml + wakeup-source: true + patternProperties: "^(.+-hog(-[0-9]+)?)$": type: object diff --git a/Documentation/devicetree/bindings/mfd/fsl,mc13xxx.yaml b/Documentation/devicetree/bindings/mfd/fsl,mc13xxx.yaml index d2886f2686a8d3..cfa69f1f380adb 100644 --- a/Documentation/devicetree/bindings/mfd/fsl,mc13xxx.yaml +++ b/Documentation/devicetree/bindings/mfd/fsl,mc13xxx.yaml @@ -93,38 +93,14 @@ properties: leds: type: object - $ref: /schemas/leds/common.yaml# + additionalProperties: false properties: - reg: - description: | - One of - MC13783 LED IDs - 0: Main display - 1: AUX display - 2: Keypad - 3: Red 1 - 4: Green 1 - 5: Blue 1 - 6: Red 2 - 7: Green 2 - 8: Blue 2 - 9: Red 3 - 10: Green 3 - 11: Blue 3 - - MC13892 LED IDs - 0: Main display - 1: AUX display - 2: Keypad - 3: Red - 4: Green - 5: Blue - - MC34708 LED IDs - 0: Charger Red - 1: Charger Green - maxItems: 1 + '#address-cells': + const: 1 + + '#size-cells': + const: 0 led-control: $ref: /schemas/types.yaml#/definitions/uint32-array @@ -132,6 +108,42 @@ properties: Setting for LED-Control register array length depends on model, mc13783: 6, mc13892: 4, mc34708: 1 + patternProperties: + '^led@[0-9a-b]$': + $ref: /schemas/leds/common.yaml# + unevaluatedProperties: false + + properties: + reg: + description: | + One of + MC13783 LED IDs + 0: Main display + 1: AUX display + 2: Keypad + 3: Red 1 + 4: Green 1 + 5: Blue 1 + 6: Red 2 + 7: Green 2 + 8: Blue 2 + 9: Red 3 + 10: Green 3 + 11: Blue 3 + + MC13892 LED IDs + 0: Main display + 1: AUX display + 2: Keypad + 3: Red + 4: Green + 5: Blue + + MC34708 LED IDs + 0: Charger Red + 1: Charger Green + maxItems: 1 + regulators: type: object @@ -262,7 +274,7 @@ examples: #size-cells = <0>; led-control = <0x000 0x000 0x0e0 0x000>; - sysled@3 { + led@3 { reg = <3>; label = "system:red:live"; linux,default-trigger = "heartbeat"; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77705.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77705.yaml index 0ec89f0adc64d2..8b62aadb4213d4 100644 --- a/Documentation/devicetree/bindings/mfd/maxim,max77705.yaml +++ b/Documentation/devicetree/bindings/mfd/maxim,max77705.yaml @@ -26,6 +26,18 @@ properties: interrupts: maxItems: 1 + interrupt-controller: + description: + The driver implements an interrupt controller for the sub devices. + The interrupt number mapping is as follows + 0 - charger + 1 - topsys + 2 - fuelgauge + 3 - usb type-c management block. + + '#interrupt-cells': + const: 1 + haptic: type: object additionalProperties: false @@ -118,8 +130,10 @@ examples: pmic@66 { compatible = "maxim,max77705"; reg = <0x66>; + #interrupt-cells = <1>; interrupt-parent = <&pm8998_gpios>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; pinctrl-0 = <&chg_int_default>; pinctrl-names = "default"; diff --git a/Documentation/devicetree/bindings/mfd/nxp,pf1550.yaml b/Documentation/devicetree/bindings/mfd/nxp,pf1550.yaml new file mode 100644 index 00000000000000..e50dc44252c600 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/nxp,pf1550.yaml @@ -0,0 +1,161 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/nxp,pf1550.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP PF1550 Power Management IC + +maintainers: + - Samuel Kayode + +description: + PF1550 PMIC provides battery charging and power supply for low power IoT and + wearable applications. This device consists of an i2c controlled MFD that + includes regulators, battery charging and an onkey/power button. + +$ref: /schemas/power/supply/power-supply.yaml + +properties: + compatible: + const: nxp,pf1550 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + wakeup-source: true + + regulators: + type: object + additionalProperties: false + + patternProperties: + "^(ldo[1-3]|sw[1-3]|vrefddr)$": + type: object + $ref: /schemas/regulator/regulator.yaml + description: + regulator configuration for ldo1-3, buck converters(sw1-3) + and DDR termination reference voltage (vrefddr) + unevaluatedProperties: false + + monitored-battery: + description: | + A phandle to a monitored battery node that contains a valid value + for: + constant-charge-voltage-max-microvolt. + + nxp,thermal-regulation-celsius: + description: + Temperature threshold for thermal regulation of charger in celsius. + enum: [ 80, 95, 110, 125 ] + + nxp,min-system-microvolt: + description: + System specific lower limit voltage. + enum: [ 3500000, 3700000, 4300000 ] + + nxp,disable-key-power: + type: boolean + description: + Disable power-down using a long key-press. The onkey driver will remove + support for the KEY_POWER key press when triggered using a long press of + the onkey. + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include + #include + + battery: battery-cell { + compatible = "simple-battery"; + constant-charge-voltage-max-microvolt = <4400000>; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@8 { + compatible = "nxp,pf1550"; + reg = <0x8>; + + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + monitored-battery = <&battery>; + nxp,min-system-microvolt = <4300000>; + nxp,thermal-regulation-celsius = <80>; + + regulators { + sw1_reg: sw1 { + regulator-name = "sw1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1387500>; + regulator-always-on; + regulator-ramp-delay = <6250>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-min-microvolt = <1270000>; + }; + }; + + sw2_reg: sw2 { + regulator-name = "sw2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1387500>; + regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + sw3_reg: sw3 { + regulator-name = "sw3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vldo1_reg: ldo1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vldo2_reg: ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vldo3_reg: ldo3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml index 078a6886f8b1e9..65c80e3b45008f 100644 --- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml @@ -43,6 +43,7 @@ properties: - qcom,pm7250b - qcom,pm7550ba - qcom,pm7325 + - qcom,pm7550 - qcom,pm8004 - qcom,pm8005 - qcom,pm8009 @@ -84,6 +85,7 @@ properties: - qcom,pmi8994 - qcom,pmi8998 - qcom,pmih0108 + - qcom,pmiv0104 - qcom,pmk8002 - qcom,pmk8350 - qcom,pmk8550 diff --git a/Documentation/devicetree/bindings/mfd/renesas,r2a11302ft.yaml b/Documentation/devicetree/bindings/mfd/renesas,r2a11302ft.yaml new file mode 100644 index 00000000000000..7b96619ebd8cf4 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/renesas,r2a11302ft.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/renesas,r2a11302ft.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R2A11302FT Power Supply ICs for R-Car + +maintainers: + - Wolfram Sang + +description: | + The Renesas R2A11302FT PMIC is used with Renesas R-Car Gen1/Gen2 + based SoCs. + + FIXME: The binding is incomplete and resembles the information gathered + so far. + +properties: + compatible: + const: renesas,r2a11302ft + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 6000000 + + spi-cpol: true + + spi-cpha: true + +required: + - compatible + - reg + - spi-cpol + - spi-cpha + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + pmic@0 { + compatible = "renesas,r2a11302ft"; + reg = <0>; + spi-max-frequency = <6000000>; + spi-cpol; + spi-cpha; + }; + }; +... diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml index 0e06570483ae97..adb491bcc8dcc7 100644 --- a/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml +++ b/Documentation/devicetree/bindings/mfd/rohm,bd96801-pmic.yaml @@ -57,8 +57,7 @@ properties: - prstb - intb-only - timeout-sec: - maxItems: 2 + timeout-sec: true regulators: $ref: /schemas/regulator/rohm,bd96801-regulator.yaml @@ -72,7 +71,10 @@ required: - interrupt-names - regulators -additionalProperties: false +allOf: + - $ref: /schemas/watchdog/watchdog.yaml + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml index ee0be32ac0204d..4f829fe75d41d6 100644 --- a/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml +++ b/Documentation/devicetree/bindings/mfd/silergy,sy7636a.yaml @@ -32,6 +32,17 @@ properties: Specifying the power good GPIOs. maxItems: 1 + enable-gpios: + maxItems: 1 + + vcom-en-gpios: + maxItems: 1 + + vin-supply: + description: + Supply for the whole chip. Some vendor kernels and devicetrees + declare this as a non-existing GPIO named "pwrall". + regulators: type: object diff --git a/Documentation/devicetree/bindings/mfd/st,stmpe.yaml b/Documentation/devicetree/bindings/mfd/st,stmpe.yaml index b77cc3f3075d79..df43878fbe18f3 100644 --- a/Documentation/devicetree/bindings/mfd/st,stmpe.yaml +++ b/Documentation/devicetree/bindings/mfd/st,stmpe.yaml @@ -12,7 +12,7 @@ description: STMicroelectronics Port Expander (STMPE) is a series of slow peripherals connected to SPI or I2C. maintainers: - - Linus Walleij + - Linus Walleij allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# diff --git a/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml index b2cfa4120b8af8..0fdfbfdfe88a36 100644 --- a/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml +++ b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: ST-Ericsson Analog Baseband AB8500 and AB8505 maintainers: - - Linus Walleij + - Linus Walleij description: the AB8500 "Analog Baseband" is the mixed-signals integrated circuit @@ -444,7 +444,6 @@ properties: additionalProperties: false - regulator-external: description: Node describing the AB8500 external regulators. This concerns the autonomous regulators VSMPS1, VSMPS2 and VSMPS3 diff --git a/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml b/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml index d6c13779d44e93..4edd4a3bab880d 100644 --- a/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml +++ b/Documentation/devicetree/bindings/mfd/stericsson,db8500-prcmu.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: ST-Ericsson DB8500 PRCMU - Power Reset and Control Management Unit maintainers: - - Linus Walleij + - Linus Walleij description: The DB8500 Power Reset and Control Management Unit is an XP70 8-bit diff --git a/Documentation/devicetree/bindings/mfd/syscon-common.yaml b/Documentation/devicetree/bindings/mfd/syscon-common.yaml index 451cbad467a3c5..14a08e7bc8bdd7 100644 --- a/Documentation/devicetree/bindings/mfd/syscon-common.yaml +++ b/Documentation/devicetree/bindings/mfd/syscon-common.yaml @@ -35,9 +35,6 @@ properties: minItems: 2 maxItems: 5 # Should be enough - reg: - maxItems: 1 - reg-io-width: description: The size (in bytes) of the IO accesses that should be performed diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml index 657c38175fba21..55efb83b1495ac 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.yaml +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml @@ -85,6 +85,7 @@ select: - mediatek,mt2701-pctl-a-syscfg - mediatek,mt2712-pctl-a-syscfg - mediatek,mt6397-pctl-pmic-syscfg + - mediatek,mt7981-topmisc - mediatek,mt7988-topmisc - mediatek,mt8135-pctl-a-syscfg - mediatek,mt8135-pctl-b-syscfg @@ -133,111 +134,126 @@ select: properties: compatible: - items: - - enum: - - airoha,en7581-pbus-csr - - al,alpine-sysfabric-service - - allwinner,sun8i-a83t-system-controller - - allwinner,sun8i-h3-system-controller - - allwinner,sun8i-v3s-system-controller - - allwinner,sun50i-a64-system-controller - - altr,l3regs - - altr,sdr-ctl - - amd,pensando-elba-syscon - - amlogic,meson-mx-assist - - amlogic,meson-mx-bootrom - - amlogic,meson8-analog-top - - amlogic,meson8b-analog-top - - amlogic,meson8-pmu - - amlogic,meson8b-pmu - - apm,merlin-poweroff-mailbox - - apm,mustang-poweroff-mailbox - - apm,xgene-csw - - apm,xgene-efuse - - apm,xgene-mcb - - apm,xgene-rb - - apm,xgene-scu - - atmel,sama5d2-sfrbu - - atmel,sama5d3-nfc-io - - atmel,sama5d3-sfrbu - - atmel,sama5d4-sfrbu - - axis,artpec6-syscon - - brcm,cru-clkset - - brcm,sr-cdru - - brcm,sr-mhb - - cirrus,ep7209-syscon1 - - cirrus,ep7209-syscon2 - - cirrus,ep7209-syscon3 - - cnxt,cx92755-uc - - freecom,fsg-cs2-system-controller - - fsl,imx93-aonmix-ns-syscfg - - fsl,imx93-wakeupmix-syscfg - - fsl,ls1088a-reset - - fsl,vf610-anatop - - fsl,vf610-mscm-cpucfg - - hisilicon,dsa-subctrl - - hisilicon,hi6220-sramctrl - - hisilicon,hip04-ppe - - hisilicon,pcie-sas-subctrl - - hisilicon,peri-subctrl - - hpe,gxp-sysreg - - loongson,ls1b-syscon - - loongson,ls1c-syscon - - lsi,axxia-syscon - - marvell,armada-3700-cpu-misc - - marvell,armada-3700-nb-pm - - marvell,armada-3700-avs - - marvell,armada-3700-usb2-host-device-misc - - marvell,armada-3700-usb2-host-misc - - marvell,dove-global-config - - mediatek,mt2701-pctl-a-syscfg - - mediatek,mt2712-pctl-a-syscfg - - mediatek,mt6397-pctl-pmic-syscfg - - mediatek,mt7988-topmisc - - mediatek,mt8135-pctl-a-syscfg - - mediatek,mt8135-pctl-b-syscfg - - mediatek,mt8173-pctl-a-syscfg - - mediatek,mt8365-infracfg-nao - - mediatek,mt8365-syscfg - - microchip,lan966x-cpu-syscon - - microchip,mpfs-control-scb - - microchip,mpfs-sysreg-scb - - microchip,sam9x60-sfr - - microchip,sama7d65-ddr3phy - - microchip,sama7d65-sfrbu - - microchip,sama7g5-ddr3phy - - mscc,ocelot-cpu-syscon - - mstar,msc313-pmsleep - - nuvoton,ma35d1-sys - - nuvoton,wpcm450-shm - - qcom,apq8064-mmss-sfpb - - qcom,apq8064-sps-sic - - rockchip,px30-qos - - rockchip,rk3036-qos - - rockchip,rk3066-qos - - rockchip,rk3128-qos - - rockchip,rk3228-qos - - rockchip,rk3288-qos - - rockchip,rk3368-qos - - rockchip,rk3399-qos - - rockchip,rk3528-qos - - rockchip,rk3562-qos - - rockchip,rk3568-qos - - rockchip,rk3576-qos - - rockchip,rk3588-qos - - rockchip,rv1126-qos - - st,spear1340-misc - - stericsson,nomadik-pmu - - starfive,jh7100-sysmain - - ti,am62-opp-efuse-table - - ti,am62-usb-phy-ctrl - - ti,am625-dss-oldi-io-ctrl - - ti,am62p-cpsw-mac-efuse - - ti,am654-dss-oldi-io-ctrl - - ti,j784s4-acspcie-proxy-ctrl - - ti,j784s4-pcie-ctrl - - ti,keystone-pllctrl - - const: syscon + oneOf: + - items: + - enum: + - airoha,en7581-pbus-csr + - al,alpine-sysfabric-service + - allwinner,sun8i-a83t-system-controller + - allwinner,sun8i-h3-system-controller + - allwinner,sun8i-v3s-system-controller + - allwinner,sun50i-a64-system-controller + - altr,l3regs + - altr,sdr-ctl + - amd,pensando-elba-syscon + - amlogic,meson-mx-assist + - amlogic,meson-mx-bootrom + - amlogic,meson8-analog-top + - amlogic,meson8b-analog-top + - amlogic,meson8-pmu + - amlogic,meson8b-pmu + - apm,merlin-poweroff-mailbox + - apm,mustang-poweroff-mailbox + - apm,xgene-csw + - apm,xgene-efuse + - apm,xgene-mcb + - apm,xgene-rb + - apm,xgene-scu + - atmel,sama5d2-sfrbu + - atmel,sama5d3-nfc-io + - atmel,sama5d3-sfrbu + - atmel,sama5d4-sfrbu + - axis,artpec6-syscon + - brcm,cru-clkset + - brcm,sr-cdru + - brcm,sr-mhb + - cirrus,ep7209-syscon1 + - cirrus,ep7209-syscon2 + - cirrus,ep7209-syscon3 + - cnxt,cx92755-uc + - freecom,fsg-cs2-system-controller + - fsl,imx93-aonmix-ns-syscfg + - fsl,imx93-wakeupmix-syscfg + - fsl,ls1088a-reset + - fsl,vf610-anatop + - fsl,vf610-mscm-cpucfg + - hisilicon,dsa-subctrl + - hisilicon,hi6220-sramctrl + - hisilicon,hip04-ppe + - hisilicon,pcie-sas-subctrl + - hisilicon,peri-subctrl + - hpe,gxp-sysreg + - loongson,ls1b-syscon + - loongson,ls1c-syscon + - lsi,axxia-syscon + - marvell,armada-3700-cpu-misc + - marvell,armada-3700-nb-pm + - marvell,armada-3700-avs + - marvell,armada-3700-usb2-host-device-misc + - marvell,armada-3700-usb2-host-misc + - marvell,dove-global-config + - mediatek,mt2701-pctl-a-syscfg + - mediatek,mt2712-pctl-a-syscfg + - mediatek,mt6397-pctl-pmic-syscfg + - mediatek,mt7988-topmisc + - mediatek,mt8135-pctl-a-syscfg + - mediatek,mt8135-pctl-b-syscfg + - mediatek,mt8173-pctl-a-syscfg + - mediatek,mt8365-infracfg-nao + - mediatek,mt8365-syscfg + - microchip,lan966x-cpu-syscon + - microchip,mpfs-control-scb + - microchip,mpfs-sysreg-scb + - microchip,sam9x60-sfr + - microchip,sama7d65-ddr3phy + - microchip,sama7d65-sfrbu + - microchip,sama7g5-ddr3phy + - mscc,ocelot-cpu-syscon + - mstar,msc313-pmsleep + - nuvoton,ma35d1-sys + - nuvoton,wpcm450-shm + - qcom,apq8064-mmss-sfpb + - qcom,apq8064-sps-sic + - rockchip,px30-qos + - rockchip,rk3036-qos + - rockchip,rk3066-qos + - rockchip,rk3128-qos + - rockchip,rk3228-qos + - rockchip,rk3288-qos + - rockchip,rk3368-qos + - rockchip,rk3399-qos + - rockchip,rk3528-qos + - rockchip,rk3562-qos + - rockchip,rk3568-qos + - rockchip,rk3576-qos + - rockchip,rk3588-qos + - rockchip,rv1126-qos + - st,spear1340-misc + - stericsson,nomadik-pmu + - starfive,jh7100-sysmain + - ti,am62-opp-efuse-table + - ti,am62-usb-phy-ctrl + - ti,am625-dss-oldi-io-ctrl + - ti,am62p-cpsw-mac-efuse + - ti,am654-dss-oldi-io-ctrl + - ti,j784s4-acspcie-proxy-ctrl + - ti,j784s4-pcie-ctrl + - ti,keystone-pllctrl + - const: syscon + - items: + - enum: + - microchip,sama7g5-sfrbu + - microchip,sama7d65-sfrbu + - const: atmel,sama5d2-sfrbu + - const: syscon + - items: + - const: microchip,pic64gx-control-scb + - const: microchip,mpfs-control-scb + - const: syscon + - items: + - const: microchip,pic64gx-sysreg-scb + - const: microchip,mpfs-sysreg-scb + - const: syscon reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/mfd/ti,tps65910.yaml b/Documentation/devicetree/bindings/mfd/ti,tps65910.yaml index a2668fc30a7bf1..f1a76f88fc0cdd 100644 --- a/Documentation/devicetree/bindings/mfd/ti,tps65910.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,tps65910.yaml @@ -166,9 +166,6 @@ patternProperties: required: - compatible - reg - - interrupts - - interrupt-controller - - '#interrupt-cells' - gpio-controller - '#gpio-cells' - regulators diff --git a/Documentation/devicetree/bindings/mfd/ti,twl.yaml b/Documentation/devicetree/bindings/mfd/ti,twl.yaml index 776b04e182cb2a..9cc3e4721612e9 100644 --- a/Documentation/devicetree/bindings/mfd/ti,twl.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,twl.yaml @@ -55,6 +55,15 @@ allOf: gpadc: false + pwrbutton: + properties: + compatible: + const: ti,twl4030-pwrbutton + interrupts: + items: + - items: + const: 8 + usb-comparator: false - if: @@ -95,7 +104,14 @@ allOf: compatible: const: ti,twl6030-gpadc - pwrbutton: false + pwrbutton: + properties: + compatible: + const: ti,twl6030-pwrbutton + interrupts: + items: + - items: + const: 0 madc: false @@ -146,7 +162,14 @@ allOf: compatible: const: ti,twl6032-gpadc - pwrbutton: false + pwrbutton: + properties: + compatible: + const: ti,twl6030-pwrbutton + interrupts: + items: + - items: + const: 0 madc: false @@ -226,11 +249,11 @@ properties: properties: compatible: - const: ti,twl4030-pwrbutton + enum: + - ti,twl4030-pwrbutton + - ti,twl6030-pwrbutton interrupts: - items: - - items: - const: 8 + maxItems: 1 watchdog: type: object @@ -400,7 +423,7 @@ properties: - '#pwm-cells' patternProperties: - "^regulator-": + '^regulator-': type: object unevaluatedProperties: false $ref: /schemas/regulator/regulator.yaml @@ -429,7 +452,7 @@ required: - reg - interrupts - interrupt-controller - - "#interrupt-cells" + - '#interrupt-cells' examples: - | @@ -459,6 +482,11 @@ examples: #io-channel-cells = <1>; }; + pwrbutton { + compatible = "ti,twl6030-pwrbutton"; + interrupts = <0>; + }; + rtc { compatible = "ti,twl4030-rtc"; interrupts = <8>; diff --git a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml index aab89946b04fbd..1198d87d0ab67a 100644 --- a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml +++ b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Intel IXP4xx AHB Queue Manager maintainers: - - Linus Walleij + - Linus Walleij description: | The IXP4xx AHB Queue Manager maintains queues as circular buffers in diff --git a/Documentation/devicetree/bindings/misc/pci1de4,1.yaml b/Documentation/devicetree/bindings/misc/pci1de4,1.yaml index 2f9a7a554ed8a9..17a8c19af8cc22 100644 --- a/Documentation/devicetree/bindings/misc/pci1de4,1.yaml +++ b/Documentation/devicetree/bindings/misc/pci1de4,1.yaml @@ -25,6 +25,10 @@ properties: items: - const: pci1de4,1 + reg: + maxItems: 1 + description: The PCI Bus-Device-Function address. + '#interrupt-cells': const: 2 description: | @@ -101,6 +105,7 @@ unevaluatedProperties: false required: - compatible + - reg - '#interrupt-cells' - interrupt-controller - pci-ep-bus@1 @@ -111,8 +116,9 @@ examples: #address-cells = <3>; #size-cells = <2>; - rp1@0,0 { + dev@0,0 { compatible = "pci1de4,1"; + reg = <0x10000 0x0 0x0 0x0 0x0>; ranges = <0x01 0x00 0x00000000 0x82010000 0x00 0x00 0x00 0x400000>; #address-cells = <3>; #size-cells = <2>; diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml index 8f62e2c7fa6414..f90fd73904a246 100644 --- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml +++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: ARM PrimeCell MultiMedia Card Interface (MMCI) PL180 and PL181 maintainers: - - Linus Walleij + - Linus Walleij - Ulf Hansson description: diff --git a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml index 9fce8cd7b0b62b..d24950ccea9522 100644 --- a/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/aspeed,sdhci.yaml @@ -41,7 +41,7 @@ properties: patternProperties: "^sdhci@[0-9a-f]+$": type: object - $ref: mmc-controller.yaml + $ref: sdhci-common.yaml unevaluatedProperties: false properties: diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml index 493655a38b376d..0936bfef8c75b3 100644 --- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml +++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.yaml @@ -21,9 +21,11 @@ properties: - items: - enum: - brcm,bcm2712-sdhci + - brcm,bcm72116-sdhci - brcm,bcm74165b0-sdhci - brcm,bcm7445-sdhci - brcm,bcm7425-sdhci + - brcm,bcm74371-sdhci - const: brcm,sdhci-brcmstb reg: diff --git a/Documentation/devicetree/bindings/mmc/davinci_mmc.txt b/Documentation/devicetree/bindings/mmc/davinci_mmc.txt deleted file mode 100644 index 516fb0143d4c21..00000000000000 --- a/Documentation/devicetree/bindings/mmc/davinci_mmc.txt +++ /dev/null @@ -1,32 +0,0 @@ -* TI Highspeed MMC host controller for DaVinci - -The Highspeed MMC Host Controller on TI DaVinci family -provides an interface for MMC, SD and SDIO types of memory cards. - -This file documents the properties used by the davinci_mmc driver. - -Required properties: -- compatible: - Should be "ti,da830-mmc": for da830, da850, dm365 - Should be "ti,dm355-mmc": for dm355, dm644x - -Optional properties: -- bus-width: Number of data lines, can be <1>, <4>, or <8>, default <1> -- max-frequency: Maximum operating clock frequency, default 25MHz. -- dmas: List of DMA specifiers with the controller specific format - as described in the generic DMA client binding. A tx and rx - specifier is required. -- dma-names: RX and TX DMA request names. These strings correspond - 1:1 with the DMA specifiers listed in dmas. - -Example: -mmc0: mmc@1c40000 { - compatible = "ti,da830-mmc", - reg = <0x40000 0x1000>; - interrupts = <16>; - bus-width = <4>; - max-frequency = <50000000>; - dmas = <&edma 16 - &edma 17>; - dma-names = "rx", "tx"; -}; diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml index bf273115235be1..acb9fb9a92cd7f 100644 --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml @@ -38,6 +38,7 @@ properties: - rockchip,rk3328-dw-mshc - rockchip,rk3368-dw-mshc - rockchip,rk3399-dw-mshc + - rockchip,rk3506-dw-mshc - rockchip,rk3528-dw-mshc - rockchip,rk3562-dw-mshc - rockchip,rk3568-dw-mshc diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml index 676a7469538937..242a3c6b925c5b 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.yaml @@ -50,8 +50,7 @@ properties: - const: clk_ahb - const: clk_xin - dma-coherent: - type: boolean + dma-coherent: true # PHY output tap delays: # Used to delay the data valid window and align it to the sampling clock. diff --git a/Documentation/devicetree/bindings/mmc/sdhci-milbeaut.txt b/Documentation/devicetree/bindings/mmc/sdhci-milbeaut.txt deleted file mode 100644 index 627ee89c125b06..00000000000000 --- a/Documentation/devicetree/bindings/mmc/sdhci-milbeaut.txt +++ /dev/null @@ -1,30 +0,0 @@ -* SOCIONEXT Milbeaut SDHCI controller - -This file documents differences between the core properties in mmc.txt -and the properties used by the sdhci_milbeaut driver. - -Required properties: -- compatible: "socionext,milbeaut-m10v-sdhci-3.0" -- clocks: Must contain an entry for each entry in clock-names. It is a - list of phandles and clock-specifier pairs. - See ../clocks/clock-bindings.txt for details. -- clock-names: Should contain the following two entries: - "iface" - clock used for sdhci interface - "core" - core clock for sdhci controller - -Optional properties: -- fujitsu,cmd-dat-delay-select: boolean property indicating that this host - requires the CMD_DAT_DELAY control to be enabled. - -Example: - sdhci3: mmc@1b010000 { - compatible = "socionext,milbeaut-m10v-sdhci-3.0"; - reg = <0x1b010000 0x10000>; - interrupts = <0 265 0x4>; - voltage-ranges = <3300 3300>; - bus-width = <4>; - clocks = <&clk 7>, <&ahb_clk>; - clock-names = "core", "iface"; - cap-sdio-irq; - fujitsu,cmd-dat-delay-select; - }; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml index 594bd174ff211e..938be8228d668c 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml @@ -42,6 +42,7 @@ properties: - qcom,ipq5424-sdhci - qcom,ipq6018-sdhci - qcom,ipq9574-sdhci + - qcom,kaanapali-sdhci - qcom,milos-sdhci - qcom,qcm2290-sdhci - qcom,qcs404-sdhci @@ -70,6 +71,7 @@ properties: - qcom,sm8450-sdhci - qcom,sm8550-sdhci - qcom,sm8650-sdhci + - qcom,sm8750-sdhci - qcom,x1e80100-sdhci - const: qcom,sdhci-msm-v5 # for sdcc version 5.0 diff --git a/Documentation/devicetree/bindings/mmc/sdhci-omap.txt b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt deleted file mode 100644 index f91e341e6b36c4..00000000000000 --- a/Documentation/devicetree/bindings/mmc/sdhci-omap.txt +++ /dev/null @@ -1,43 +0,0 @@ -* TI OMAP SDHCI Controller - -Refer to mmc.txt for standard MMC bindings. - -For UHS devices which require tuning, the device tree should have a "cpu_thermal" node which maps to the appropriate thermal zone. This is used to get the temperature of the zone during tuning. - -Required properties: -- compatible: Should be "ti,omap2430-sdhci" for omap2430 controllers - Should be "ti,omap3-sdhci" for omap3 controllers - Should be "ti,omap4-sdhci" for omap4 and ti81 controllers - Should be "ti,omap5-sdhci" for omap5 controllers - Should be "ti,dra7-sdhci" for DRA7 and DRA72 controllers - Should be "ti,k2g-sdhci" for K2G - Should be "ti,am335-sdhci" for am335x controllers - Should be "ti,am437-sdhci" for am437x controllers -- ti,hwmods: Must be "mmc", is controller instance starting 1 - (Not required for K2G). -- pinctrl-names: Should be subset of "default", "hs", "sdr12", "sdr25", "sdr50", - "ddr50-rev11", "sdr104-rev11", "ddr50", "sdr104", - "ddr_1_8v-rev11", "ddr_1_8v" or "ddr_3_3v", "hs200_1_8v-rev11", - "hs200_1_8v", -- pinctrl- : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt - -Optional properties: -- dmas: List of DMA specifiers with the controller specific format as described - in the generic DMA client binding. A tx and rx specifier is required. -- dma-names: List of DMA request names. These strings correspond 1:1 with the - DMA specifiers listed in dmas. The string naming is to be "tx" - and "rx" for TX and RX DMA requests, respectively. - -Deprecated properties: -- ti,non-removable: Compatible with the generic non-removable property - -Example: - mmc1: mmc@4809c000 { - compatible = "ti,dra7-sdhci"; - reg = <0x4809c000 0x400>; - ti,hwmods = "mmc1"; - bus-width = <4>; - vmmc-supply = <&vmmc>; /* phandle to regulator node */ - dmas = <&sdma 61 &sdma 62>; - dma-names = "tx", "rx"; - }; diff --git a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml index f882219a0a26a7..7e7c55dc244034 100644 --- a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml +++ b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml @@ -30,6 +30,7 @@ properties: - sophgo,sg2002-dwcmshc - sophgo,sg2042-dwcmshc - thead,th1520-dwcmshc + - eswin,eic7700-dwcmshc reg: maxItems: 1 @@ -52,17 +53,30 @@ properties: maxItems: 5 reset-names: - items: - - const: core - - const: bus - - const: axi - - const: block - - const: timer + maxItems: 5 rockchip,txclk-tapnum: description: Specify the number of delay for tx sampling. $ref: /schemas/types.yaml#/definitions/uint8 + eswin,hsp-sp-csr: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: Phandle to HSP(High-Speed Peripheral) device + - description: Offset of the stability status register for internal + clock. + - description: Offset of the stability register for host regulator + voltage. + description: + HSP CSR is to control and get status of different high-speed peripherals + (such as Ethernet, USB, SATA, etc.) via register, which can tune + board-level's parameters of PHY, etc. + + eswin,drive-impedance-ohms: + description: Specifies the drive impedance in Ohm. + enum: [33, 40, 50, 66, 100] + required: - compatible - reg @@ -110,6 +124,37 @@ allOf: - const: block - const: timer + - if: + properties: + compatible: + contains: + const: eswin,eic7700-dwcmshc + then: + properties: + resets: + minItems: 4 + maxItems: 4 + reset-names: + items: + - const: axi + - const: phy + - const: prstn + - const: txrx + required: + - eswin,hsp-sp-csr + - eswin,drive-impedance-ohms + else: + properties: + resets: + maxItems: 5 + reset-names: + items: + - const: core + - const: bus + - const: axi + - const: block + - const: timer + - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/mmc/socionext,milbeaut-m10v-sdhci-3.0.yaml b/Documentation/devicetree/bindings/mmc/socionext,milbeaut-m10v-sdhci-3.0.yaml new file mode 100644 index 00000000000000..2ba53626a95981 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/socionext,milbeaut-m10v-sdhci-3.0.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/socionext,milbeaut-m10v-sdhci-3.0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SOCIONEXT Milbeaut SDHCI controller + +maintainers: + - Taichi Sugaya + - Takao Orito + +description: + The SOCIONEXT Milbeaut SDHCI controller is a specialized SD Host + Controller found in some of Socionext's Milbeaut image processing SoCs. + It features a dedicated "bridge controller." This bridge controller + implements special functions like reset control, clock management for + various SDR modes (SDR12, SDR25, SDR50) and physical pin property settings. + +allOf: + - $ref: sdhci-common.yaml# + +properties: + compatible: + const: socionext,milbeaut-m10v-sdhci-3.0 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: core + - const: iface + + fujitsu,cmd-dat-delay-select: + description: + Its presence indicates that the controller requires a specific command + and data line delay selection mechanism for proper operation, particularly + when dealing with high-speed SD/eMMC modes. + type: boolean + + voltage-ranges: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: minimum slot voltage (mV). + - description: maximum slot voltage (mV). + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include + mmc@1b010000 { + compatible = "socionext,milbeaut-m10v-sdhci-3.0"; + reg = <0x1b010000 0x10000>; + interrupts = ; + voltage-ranges = <3300 3300>; + bus-width = <4>; + clocks = <&clk 7>, <&ahb_clk>; + clock-names = "core", "iface"; + cap-sdio-irq; + fujitsu,cmd-dat-delay-select; + }; +... diff --git a/Documentation/devicetree/bindings/mmc/ti,da830-mmc.yaml b/Documentation/devicetree/bindings/mmc/ti,da830-mmc.yaml new file mode 100644 index 00000000000000..36b33dde086b9f --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/ti,da830-mmc.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/ti,da830-mmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI Highspeed MMC host controller for DaVinci + +description: + The Highspeed MMC Host Controller on TI DaVinci family + provides an interface for MMC, SD and SDIO types of memory cards. + +allOf: + - $ref: mmc-controller.yaml + +maintainers: + - Kishon Vijay Abraham I + +properties: + compatible: + enum: + - ti,da830-mmc + - ti,dm355-mmc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 2 + + dmas: + maxItems: 2 + + dma-names: + items: + - const: rx + - const: tx + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include + mmc@1c40000 { + compatible = "ti,da830-mmc"; + reg = <0x40000 0x1000>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH>, + <17 IRQ_TYPE_LEVEL_HIGH>; + bus-width = <4>; + max-frequency = <50000000>; + dmas = <&edma 16>, <&edma 17>; + dma-names = "rx", "tx"; + }; +... diff --git a/Documentation/devicetree/bindings/mmc/ti,omap2430-sdhci.yaml b/Documentation/devicetree/bindings/mmc/ti,omap2430-sdhci.yaml new file mode 100644 index 00000000000000..34e288f3ef1357 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/ti,omap2430-sdhci.yaml @@ -0,0 +1,169 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/ti,omap2430-sdhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI OMAP SDHCI Controller + +maintainers: + - Kishon Vijay Abraham I + +description: + For UHS devices which require tuning, the device tree should have a + cpu_thermal node which maps to the appropriate thermal zone. This + is used to get the temperature of the zone during tuning. + +properties: + compatible: + enum: + - ti,omap2430-sdhci + - ti,omap3-sdhci + - ti,omap4-sdhci + - ti,omap5-sdhci + - ti,dra7-sdhci + - ti,k2g-sdhci + - ti,am335-sdhci + - ti,am437-sdhci + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: fck + - const: mmchsdb_fck + + dmas: + maxItems: 2 + + dma-names: + items: + - const: tx + - const: rx + + pinctrl-names: + minItems: 1 + maxItems: 14 + items: + enum: + - default + - default-rev11 + - hs + - sdr12 + - sdr12-rev11 + - sdr25 + - sdr25-rev11 + - sdr50 + - ddr50-rev11 + - sdr104-rev11 + - ddr50 + - sdr104 + - ddr_1_8v-rev11 + - ddr_1_8v + - ddr_3_3v + - hs-rev11 + - hs200_1_8v-rev11 + - hs200_1_8v + - sleep + + pinctrl-0: + maxItems: 1 + + pinctrl-1: + maxItems: 1 + + pinctrl-2: + maxItems: 1 + + pinctrl-3: + maxItems: 1 + + pinctrl-4: + maxItems: 1 + + pinctrl-5: + maxItems: 1 + + pinctrl-6: + maxItems: 1 + + pinctrl-7: + maxItems: 1 + + pinctrl-8: + maxItems: 1 + + power-domains: + maxItems: 1 + + pbias-supply: + description: + It is used to specify the voltage regulator that provides the bias + voltage for certain analog or I/O pads. + + ti,non-removable: + description: + It indicates that a component is not meant to be easily removed or + replaced by the user, such as an embedded battery or a non-removable + storage slot like eMMC. + type: boolean + deprecated: true + + clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + It represents the speed at which a clock signal associated with a device + or bus operates, measured in Hertz (Hz). This value is crucial for configuring + hardware components that require a specific clock speed. + +required: + - compatible + - reg + - interrupts + +allOf: + - $ref: sdhci-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - ti,dra7-sdhci + - ti,k2g-sdhci + then: + required: + - max-frequency + - if: + properties: + compatible: + contains: + const: ti,k2g-sdhci + then: + required: + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include + mmc@4809c000 { + compatible = "ti,dra7-sdhci"; + reg = <0x4809c000 0x400>; + interrupts = ; + max-frequency = <192000000>; + sdhci-caps-mask = <0x0 0x400000>; + bus-width = <4>; + vmmc-supply = <&vmmc>; /* phandle to regulator node */ + dmas = <&sdma 61>, <&sdma 62>; + dma-names = "tx", "rx"; + }; +... diff --git a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml index 054b6b8bf9b911..9d061e2216cbc7 100644 --- a/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml @@ -6,9 +6,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Allwinner A10 NAND Controller -allOf: - - $ref: nand-controller.yaml - maintainers: - Chen-Yu Tsai - Maxime Ripard @@ -18,6 +15,8 @@ properties: enum: - allwinner,sun4i-a10-nand - allwinner,sun8i-a23-nand-controller + - allwinner,sun50i-h616-nand-controller + reg: maxItems: 1 @@ -25,14 +24,20 @@ properties: maxItems: 1 clocks: + minItems: 2 items: - description: Bus Clock - description: Module Clock + - description: ECC Clock + - description: MBus Clock clock-names: + minItems: 2 items: - const: ahb - const: mod + - const: ecc + - const: mbus resets: maxItems: 1 @@ -85,6 +90,36 @@ required: unevaluatedProperties: false +allOf: + - $ref: nand-controller.yaml + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun4i-a10-nand + - allwinner,sun8i-a23-nand-controller + then: + properties: + clocks: + maxItems: 2 + clock-names: + maxItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun50i-h616-nand-controller + then: + properties: + clocks: + minItems: 4 + clock-names: + minItems: 4 + examples: - | #include diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml index 284f0f882c32df..fa2aa29be794dd 100644 --- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml +++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml @@ -88,7 +88,6 @@ patternProperties: amlogic,boot-pages: [nand-is-boot-medium, "amlogic,boot-page-step"] amlogic,boot-page-step: [nand-is-boot-medium, "amlogic,boot-pages"] - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/mtd/cdns,hp-nfc.yaml b/Documentation/devicetree/bindings/mtd/cdns,hp-nfc.yaml index e1f4d7c35a8857..73dc69cee4d8fa 100644 --- a/Documentation/devicetree/bindings/mtd/cdns,hp-nfc.yaml +++ b/Documentation/devicetree/bindings/mtd/cdns,hp-nfc.yaml @@ -40,6 +40,9 @@ properties: dmas: maxItems: 1 + iommus: + maxItems: 1 + cdns,board-delay-ps: description: | Estimated Board delay. The value includes the total round trip diff --git a/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml index 1ecea848e8b903..bc89cbf8193a31 100644 --- a/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml @@ -145,7 +145,6 @@ allOf: clock-names: minItems: 1 - unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml index 1b375dee83b0c5..a9ec3ca002c7df 100644 --- a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml +++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml @@ -69,6 +69,16 @@ properties: minItems: 1 maxItems: 8 + clocks: + description: | + Chips may need clocks to be enabled for themselves or for transparent + bridges. + + power-domains: + description: | + Chips may need power domains to be enabled for themselves or for + transparent bridges. + bank-width: description: Width (in bytes) of the bank. Equal to the device width times the number of interleaved chips. diff --git a/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.yaml b/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.yaml index 97618847ee3548..e9b1a6869910cd 100644 --- a/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.yaml +++ b/Documentation/devicetree/bindings/mtd/partitions/arm,arm-firmware-suite.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: ARM Firmware Suite (AFS) Partitions maintainers: - - Linus Walleij + - Linus Walleij select: false diff --git a/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.yaml b/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.yaml index ba7445cd69e8f4..e3978d2bc056f4 100644 --- a/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.yaml +++ b/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.yaml @@ -14,7 +14,7 @@ description: The FLASH Image System (FIS) directory is a flash description 32 KB in size. maintainers: - - Linus Walleij + - Linus Walleij select: false diff --git a/Documentation/devicetree/bindings/mtd/partitions/seama.yaml b/Documentation/devicetree/bindings/mtd/partitions/seama.yaml index 4c1cbf43e81a64..4af185204b4b93 100644 --- a/Documentation/devicetree/bindings/mtd/partitions/seama.yaml +++ b/Documentation/devicetree/bindings/mtd/partitions/seama.yaml @@ -18,7 +18,7 @@ allOf: - $ref: partition.yaml# maintainers: - - Linus Walleij + - Linus Walleij properties: compatible: diff --git a/Documentation/devicetree/bindings/mux/mux-controller.yaml b/Documentation/devicetree/bindings/mux/mux-controller.yaml index 571ad9e13ecfb6..78340bbe4df628 100644 --- a/Documentation/devicetree/bindings/mux/mux-controller.yaml +++ b/Documentation/devicetree/bindings/mux/mux-controller.yaml @@ -20,7 +20,6 @@ description: | space is a simple zero-based enumeration. I.e. 0-1 for a 2-way multiplexer, 0-7 for an 8-way multiplexer, etc. - Mux controller nodes -------------------- diff --git a/Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml b/Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml index 6d22131ac2f9e2..fbe2ddcdd909cb 100644 --- a/Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml +++ b/Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml @@ -17,6 +17,7 @@ properties: compatible: enum: - airoha,en7581-eth + - airoha,an7583-eth reg: items: @@ -44,6 +45,7 @@ properties: - description: PDMA irq resets: + minItems: 7 maxItems: 8 reset-names: @@ -54,8 +56,9 @@ properties: - const: xsi-mac - const: hsi0-mac - const: hsi1-mac - - const: hsi-mac + - enum: [ hsi-mac, xfp-mac ] - const: xfp-mac + minItems: 7 memory-region: items: @@ -81,6 +84,36 @@ properties: interface to implement hardware flow offloading programming Packet Processor Engine (PPE) flow table. +allOf: + - $ref: ethernet-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - airoha,en7581-eth + then: + properties: + resets: + minItems: 8 + + reset-names: + minItems: 8 + + - if: + properties: + compatible: + contains: + enum: + - airoha,an7583-eth + then: + properties: + resets: + maxItems: 7 + + reset-names: + maxItems: 7 + patternProperties: "^ethernet@[1-4]$": type: object diff --git a/Documentation/devicetree/bindings/net/airoha,en7581-npu.yaml b/Documentation/devicetree/bindings/net/airoha,en7581-npu.yaml index c7644e6586d329..59c57f58116b56 100644 --- a/Documentation/devicetree/bindings/net/airoha,en7581-npu.yaml +++ b/Documentation/devicetree/bindings/net/airoha,en7581-npu.yaml @@ -18,6 +18,7 @@ properties: compatible: enum: - airoha,en7581-npu + - airoha,an7583-npu reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml index fc62fb2a68ac0a..323a669fa98236 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml @@ -201,7 +201,6 @@ allOf: - clocks - resets - mdio@2: $ref: mdio.yaml# unevaluatedProperties: false @@ -251,7 +250,6 @@ allOf: maxItems: 1 power-domains: false - unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/net/amd,xgbe-seattle-v1a.yaml b/Documentation/devicetree/bindings/net/amd,xgbe-seattle-v1a.yaml new file mode 100644 index 00000000000000..006add8b6410a3 --- /dev/null +++ b/Documentation/devicetree/bindings/net/amd,xgbe-seattle-v1a.yaml @@ -0,0 +1,147 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/amd,xgbe-seattle-v1a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AMD XGBE Seattle v1a + +maintainers: + - Shyam Sundar S K + +allOf: + - $ref: /schemas/net/ethernet-controller.yaml# + +properties: + compatible: + const: amd,xgbe-seattle-v1a + + reg: + items: + - description: MAC registers + - description: PCS registers + - description: SerDes Rx/Tx registers + - description: SerDes integration registers (1/2) + - description: SerDes integration registers (2/2) + + interrupts: + description: Device interrupts. The first entry is the general device + interrupt. If amd,per-channel-interrupt is specified, each DMA channel + interrupt must be specified. The last entry is the PCS auto-negotiation + interrupt. + minItems: 2 + maxItems: 6 + + clocks: + items: + - description: DMA clock for the device + - description: PTP clock for the device + + clock-names: + items: + - const: dma_clk + - const: ptp_clk + + iommus: + maxItems: 1 + + phy-mode: true + + dma-coherent: true + + amd,per-channel-interrupt: + description: Indicates that Rx and Tx complete will generate a unique + interrupt for each DMA channel. + type: boolean + + amd,speed-set: + description: > + Speed capabilities of the device. + 0 = 1GbE and 10GbE + 1 = 2.5GbE and 10GbE + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + + amd,serdes-blwc: + description: Baseline wandering correction enablement for each speed. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 3 + maxItems: 3 + items: + enum: [0, 1] + + amd,serdes-cdr-rate: + description: CDR rate speed selection for each speed. + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: CDR rate for 1GbE + - description: CDR rate for 2.5GbE + - description: CDR rate for 10GbE + + amd,serdes-pq-skew: + description: PQ data sampling skew for each speed. + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: PQ skew for 1GbE + - description: PQ skew for 2.5GbE + - description: PQ skew for 10GbE + + amd,serdes-tx-amp: + description: TX amplitude boost for each speed. + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: TX amplitude for 1GbE + - description: TX amplitude for 2.5GbE + - description: TX amplitude for 10GbE + + amd,serdes-dfe-tap-config: + description: DFE taps available to run for each speed. + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: DFE taps available for 1GbE + - description: DFE taps available for 2.5GbE + - description: DFE taps available for 10GbE + + amd,serdes-dfe-tap-enable: + description: DFE taps to enable for each speed. + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: DFE taps to enable for 1GbE + - description: DFE taps to enable for 2.5GbE + - description: DFE taps to enable for 10GbE + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - phy-mode + +unevaluatedProperties: false + +examples: + - | + ethernet@e0700000 { + compatible = "amd,xgbe-seattle-v1a"; + reg = <0xe0700000 0x80000>, + <0xe0780000 0x80000>, + <0xe1240800 0x00400>, + <0xe1250000 0x00060>, + <0xe1250080 0x00004>; + interrupts = <0 325 4>, + <0 326 1>, <0 327 1>, <0 328 1>, <0 329 1>, + <0 323 4>; + amd,per-channel-interrupt; + clocks = <&xgbe_dma_clk>, <&xgbe_ptp_clk>; + clock-names = "dma_clk", "ptp_clk"; + phy-mode = "xgmii"; + mac-address = [ 02 a1 a2 a3 a4 a5 ]; + amd,speed-set = <0>; + amd,serdes-blwc = <1>, <1>, <0>; + amd,serdes-cdr-rate = <2>, <2>, <7>; + amd,serdes-pq-skew = <10>, <10>, <30>; + amd,serdes-tx-amp = <15>, <15>, <10>; + amd,serdes-dfe-tap-config = <3>, <3>, <1>; + amd,serdes-dfe-tap-enable = <0>, <0>, <127>; + }; diff --git a/Documentation/devicetree/bindings/net/amd-xgbe.txt b/Documentation/devicetree/bindings/net/amd-xgbe.txt deleted file mode 100644 index 9c27dfcd11334b..00000000000000 --- a/Documentation/devicetree/bindings/net/amd-xgbe.txt +++ /dev/null @@ -1,76 +0,0 @@ -* AMD 10GbE driver (amd-xgbe) - -Required properties: -- compatible: Should be "amd,xgbe-seattle-v1a" -- reg: Address and length of the register sets for the device - - MAC registers - - PCS registers - - SerDes Rx/Tx registers - - SerDes integration registers (1/2) - - SerDes integration registers (2/2) -- interrupts: Should contain the amd-xgbe interrupt(s). The first interrupt - listed is required and is the general device interrupt. If the optional - amd,per-channel-interrupt property is specified, then one additional - interrupt for each DMA channel supported by the device should be specified. - The last interrupt listed should be the PCS auto-negotiation interrupt. -- clocks: - - DMA clock for the amd-xgbe device (used for calculating the - correct Rx interrupt watchdog timer value on a DMA channel - for coalescing) - - PTP clock for the amd-xgbe device -- clock-names: Should be the names of the clocks - - "dma_clk" for the DMA clock - - "ptp_clk" for the PTP clock -- phy-mode: See ethernet.txt file in the same directory - -Optional properties: -- dma-coherent: Present if dma operations are coherent -- amd,per-channel-interrupt: Indicates that Rx and Tx complete will generate - a unique interrupt for each DMA channel - this requires an additional - interrupt be configured for each DMA channel -- amd,speed-set: Speed capabilities of the device - 0 - 1GbE and 10GbE (default) - 1 - 2.5GbE and 10GbE - -The MAC address will be determined using the optional properties defined in -ethernet.txt. - -The following optional properties are represented by an array with each -value corresponding to a particular speed. The first array value represents -the setting for the 1GbE speed, the second value for the 2.5GbE speed and -the third value for the 10GbE speed. All three values are required if the -property is used. -- amd,serdes-blwc: Baseline wandering correction enablement - 0 - Off - 1 - On -- amd,serdes-cdr-rate: CDR rate speed selection -- amd,serdes-pq-skew: PQ (data sampling) skew -- amd,serdes-tx-amp: TX amplitude boost -- amd,serdes-dfe-tap-config: DFE taps available to run -- amd,serdes-dfe-tap-enable: DFE taps to enable - -Example: - xgbe@e0700000 { - compatible = "amd,xgbe-seattle-v1a"; - reg = <0 0xe0700000 0 0x80000>, - <0 0xe0780000 0 0x80000>, - <0 0xe1240800 0 0x00400>, - <0 0xe1250000 0 0x00060>, - <0 0xe1250080 0 0x00004>; - interrupt-parent = <&gic>; - interrupts = <0 325 4>, - <0 326 1>, <0 327 1>, <0 328 1>, <0 329 1>, - <0 323 4>; - amd,per-channel-interrupt; - clocks = <&xgbe_dma_clk>, <&xgbe_ptp_clk>; - clock-names = "dma_clk", "ptp_clk"; - phy-mode = "xgmii"; - mac-address = [ 02 a1 a2 a3 a4 a5 ]; - amd,speed-set = <0>; - amd,serdes-blwc = <1>, <1>, <0>; - amd,serdes-cdr-rate = <2>, <2>, <7>; - amd,serdes-pq-skew = <10>, <10>, <30>; - amd,serdes-tx-amp = <15>, <15>, <10>; - amd,serdes-dfe-tap-config = <3>, <3>, <1>; - amd,serdes-dfe-tap-enable = <0>, <0>, <127>; - }; diff --git a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml index d6ef468495c5ee..a105dc07ed125d 100644 --- a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml +++ b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml @@ -19,7 +19,12 @@ allOf: properties: compatible: - const: aspeed,ast2600-mdio + oneOf: + - const: aspeed,ast2600-mdio + - items: + - enum: + - aspeed,ast2700-mdio + - const: aspeed,ast2600-mdio reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/bluetooth/brcm,bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/brcm,bluetooth.yaml index 3c410cadff2304..95501e858e6f82 100644 --- a/Documentation/devicetree/bindings/net/bluetooth/brcm,bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/brcm,bluetooth.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Broadcom Bluetooth Chips maintainers: - - Linus Walleij + - Linus Walleij description: This binding describes Broadcom UART-attached bluetooth chips. diff --git a/Documentation/devicetree/bindings/net/bluetooth/marvell,sd8897-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/marvell,sd8897-bt.yaml new file mode 100644 index 00000000000000..a307c64cfa4d64 --- /dev/null +++ b/Documentation/devicetree/bindings/net/bluetooth/marvell,sd8897-bt.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/bluetooth/marvell,sd8897-bt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell 8897/8997 (sd8897/sd8997) bluetooth devices (SDIO) + +maintainers: + - Ariel D'Alessandro + +allOf: + - $ref: /schemas/net/bluetooth/bluetooth-controller.yaml# + +properties: + compatible: + enum: + - marvell,sd8897-bt + - marvell,sd8997-bt + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + marvell,cal-data: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: + Calibration data downloaded to the device during initialization. + maxItems: 28 + + marvell,wakeup-pin: + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Wakeup pin number of the bluetooth chip. Used by firmware to wakeup host + system. + + marvell,wakeup-gap-ms: + $ref: /schemas/types.yaml#/definitions/uint16 + description: + Wakeup latency of the host platform. Required by the chip sleep feature. + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include + + mmc { + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + + bluetooth@2 { + compatible = "marvell,sd8897-bt"; + reg = <2>; + interrupt-parent = <&pio>; + interrupts = <119 IRQ_TYPE_LEVEL_LOW>; + + marvell,cal-data = /bits/ 8 < + 0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02 + 0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00 + 0x00 0x00 0xf0 0x00>; + marvell,wakeup-pin = /bits/ 16 <0x0d>; + marvell,wakeup-gap-ms = /bits/ 16 <0x64>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml index 0e3fb4e42e3fb9..a1119c47e29b05 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml +++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml @@ -31,7 +31,6 @@ properties: - description: RX and TX rings interrupt line - description: Wake-on-LAN interrupt line - clocks: minItems: 1 items: diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml index 3f27746d9a5639..d544f785e6b97c 100644 --- a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml +++ b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml @@ -29,7 +29,6 @@ properties: maxItems: 1 description: core clock driving the MDIO block - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/net/btusb.txt b/Documentation/devicetree/bindings/net/btusb.txt index f546b1f7dd6d24..a68022a57c51e7 100644 --- a/Documentation/devicetree/bindings/net/btusb.txt +++ b/Documentation/devicetree/bindings/net/btusb.txt @@ -14,7 +14,7 @@ Required properties: Also, vendors that use btusb may have device additional properties, e.g: -Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt +Documentation/devicetree/bindings/net/bluetooth/marvell,sd8897-bt.yaml Optional properties: diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml index 61ef60d8f1c78c..2c9d37975bedd6 100644 --- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml @@ -109,6 +109,26 @@ properties: maximum: 32 minItems: 1 + pinctrl-0: + description: Default pinctrl state + + pinctrl-1: + description: Can be "sleep" or "wakeup" pinctrl state + + pinctrl-2: + description: Can be "sleep" or "wakeup" pinctrl state + + pinctrl-names: + description: + When present should contain at least "default" describing the default pin + states. Other states are "sleep" which describes the pinstate when + sleeping and "wakeup" describing the pins if wakeup is enabled. + minItems: 1 + items: + - const: default + - enum: [ sleep, wakeup ] + - const: wakeup + power-domains: description: Power domain provider node and an args specifier containing @@ -125,6 +145,11 @@ properties: minItems: 1 maxItems: 2 + wakeup-source: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + List of phandles to system idle states in which mcan can wakeup the system. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml index c155c9c6db3922..2d13638ebc6a61 100644 --- a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml +++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml @@ -49,6 +49,11 @@ properties: Must be half or less of "clocks" frequency. maximum: 20000000 + gpio-controller: true + + "#gpio-cells": + const: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml b/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml index 1219c5cb601fe6..519a11fbe972bb 100644 --- a/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml +++ b/Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml @@ -32,11 +32,15 @@ properties: - description: AHB peripheral clock - description: CAN bus clock + resets: + maxItems: 1 + required: - compatible - reg - interrupts - clocks + - resets additionalProperties: false @@ -46,6 +50,7 @@ examples: compatible = "microchip,mpfs-can"; reg = <0x2010c000 0x1000>; clocks = <&clkcfg 17>, <&clkcfg 37>; + resets = <&clkcfg 17>; interrupt-parent = <&plic>; interrupts = <56>; }; diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml index 1029786a855c56..cb14c35ba99693 100644 --- a/Documentation/devicetree/bindings/net/cdns,macb.yaml +++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml @@ -38,7 +38,10 @@ properties: - cdns,sam9x60-macb # Microchip sam9x60 SoC - microchip,mpfs-macb # Microchip PolarFire SoC - const: cdns,macb # Generic - + - items: + - const: microchip,pic64gx-macb # Microchip PIC64GX SoC + - const: microchip,mpfs-macb # Microchip PolarFire SoC + - const: cdns,macb # Generic - items: - enum: - atmel,sama5d3-macb # 10/100Mbit IP on Atmel sama5d3 SoCs @@ -47,18 +50,19 @@ properties: - const: cdns,macb # Generic - enum: - - atmel,sama5d29-gem # GEM XL IP (10/100) on Atmel sama5d29 SoCs - atmel,sama5d2-gem # GEM IP (10/100) on Atmel sama5d2 SoCs + - atmel,sama5d29-gem # GEM XL IP (10/100) on Atmel sama5d29 SoCs - atmel,sama5d3-gem # Gigabit IP on Atmel sama5d3 SoCs - atmel,sama5d4-gem # GEM IP (10/100) on Atmel sama5d4 SoCs + - cdns,emac # Generic + - cdns,gem # Generic + - cdns,macb # Generic - cdns,np4-macb # NP4 SoC devices - microchip,sama7g5-emac # Microchip SAMA7G5 ethernet interface - microchip,sama7g5-gem # Microchip SAMA7G5 gigabit ethernet interface + - mobileye,eyeq5-gem # Mobileye EyeQ5 SoCs - raspberrypi,rp1-gem # Raspberry Pi RP1 gigabit ethernet interface - sifive,fu540-c000-gem # SiFive FU540-C000 SoC - - cdns,emac # Generic - - cdns,gem # Generic - - cdns,macb # Generic - items: - enum: @@ -183,6 +187,15 @@ allOf: reg: maxItems: 1 + - if: + properties: + compatible: + contains: + const: mobileye,eyeq5-gem + then: + required: + - phys + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml index 44fd23a5fa2b31..f0b5bea2458d59 100644 --- a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml +++ b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Cortina Systems Gemini Ethernet Controller maintainers: - - Linus Walleij + - Linus Walleij description: | This ethernet controller is found in the Gemini SoC family: @@ -100,7 +100,6 @@ examples: }; }; - ethernet@60000000 { compatible = "cortina,gemini-ethernet"; reg = <0x60000000 0x4000>, /* Global registers, queue */ diff --git a/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml b/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml index f3154b19af78ad..205b683849a53b 100644 --- a/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml +++ b/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml @@ -4,10 +4,14 @@ $id: http://devicetree.org/schemas/net/dsa/lantiq,gswip.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Lantiq GSWIP Ethernet switches +title: Lantiq GSWIP and MaxLinear GSW1xx Ethernet switches -allOf: - - $ref: dsa.yaml#/$defs/ethernet-ports +description: + Lantiq GSWIP and MaxLinear GSW1xx switches share the same hardware IP. + Lantiq switches are embedded in SoCs and accessed via memory-mapped I/O, + while MaxLinear switches are standalone ICs connected via MDIO. + +$ref: dsa.yaml# maintainers: - Hauke Mehrtens @@ -18,9 +22,14 @@ properties: - lantiq,xrx200-gswip - lantiq,xrx300-gswip - lantiq,xrx330-gswip + - maxlinear,gsw120 + - maxlinear,gsw125 + - maxlinear,gsw140 + - maxlinear,gsw141 + - maxlinear,gsw145 reg: - minItems: 3 + minItems: 1 maxItems: 3 reg-names: @@ -37,9 +46,6 @@ properties: compatible: const: lantiq,xrx200-mdio - required: - - compatible - gphy-fw: type: object properties: @@ -91,10 +97,63 @@ properties: additionalProperties: false +patternProperties: + "^(ethernet-)?ports$": + type: object + patternProperties: + "^(ethernet-)?port@[0-6]$": + $ref: dsa-port.yaml# + unevaluatedProperties: false + + properties: + maxlinear,rmii-refclk-out: + type: boolean + description: + Configure the RMII reference clock to be a clock output + rather than an input. Only applicable for RMII mode. + tx-internal-delay-ps: + enum: [0, 500, 1000, 1500, 2000, 2500, 3000, 3500] + description: + RGMII TX Clock Delay defined in pico seconds. + The delay lines adjust the MII clock vs. data timing. + If this property is not present the delay is determined by + the interface mode. + rx-internal-delay-ps: + enum: [0, 500, 1000, 1500, 2000, 2500, 3000, 3500] + description: + RGMII RX Clock Delay defined in pico seconds. + The delay lines adjust the MII clock vs. data timing. + If this property is not present the delay is determined by + the interface mode. + required: - compatible - reg +allOf: + - if: + properties: + compatible: + contains: + enum: + - lantiq,xrx200-gswip + - lantiq,xrx300-gswip + - lantiq,xrx330-gswip + then: + properties: + reg: + minItems: 3 + maxItems: 3 + mdio: + required: + - compatible + else: + properties: + reg: + maxItems: 1 + reg-names: false + gphy-fw: false + unevaluatedProperties: false examples: @@ -113,8 +172,10 @@ examples: port@0 { reg = <0>; label = "lan3"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <&phy0>; + tx-internal-delay-ps = <2000>; + rx-internal-delay-ps = <2000>; }; port@1 { @@ -200,3 +261,90 @@ examples: }; }; }; + + - | + #include + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch@1f { + compatible = "maxlinear,gsw125"; + reg = <0x1f>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan0"; + phy-handle = <&switchphy0>; + phy-mode = "internal"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + phy-handle = <&switchphy1>; + phy-mode = "internal"; + }; + + port@4 { + reg = <4>; + label = "wan"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + }; + + port@5 { + reg = <5>; + phy-mode = "rgmii-id"; + tx-internal-delay-ps = <2000>; + rx-internal-delay-ps = <2000>; + ethernet = <ð0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switchphy0: switchphy@0 { + reg = <0>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_LAN; + }; + }; + }; + + switchphy1: switchphy@1 { + reg = <1>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_LAN; + }; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/micrel,ks8995.yaml b/Documentation/devicetree/bindings/net/dsa/micrel,ks8995.yaml index 854808ff5ad5d1..e9ce3606703317 100644 --- a/Documentation/devicetree/bindings/net/dsa/micrel,ks8995.yaml +++ b/Documentation/devicetree/bindings/net/dsa/micrel,ks8995.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Micrel KS8995 Family DSA Switches maintainers: - - Linus Walleij + - Linus Walleij description: The Micrel KS8995 DSA Switches are 100 Mbit switches that were produced in diff --git a/Documentation/devicetree/bindings/net/dsa/motorcomm,yt921x.yaml b/Documentation/devicetree/bindings/net/dsa/motorcomm,yt921x.yaml new file mode 100644 index 00000000000000..33a6552e46fc0d --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/motorcomm,yt921x.yaml @@ -0,0 +1,167 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/motorcomm,yt921x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Motorcomm YT921x Ethernet switch family + +maintainers: + - David Yang + +description: | + The Motorcomm YT921x series is a family of Ethernet switches with up to 8 + internal GbE PHYs and up to 2 GMACs, including: + + - YT9215S / YT9215RB / YT9215SC: 5 GbE PHYs (Port 0-4) + 2 GMACs (Port 8-9) + - YT9213NB: 2 GbE PHYs (Port 1/3) + 1 GMAC (Port 9) + - YT9214NB: 2 GbE PHYs (Port 1/3) + 2 GMACs (Port 8-9) + - YT9218N: 8 GbE PHYs (Port 0-7) + - YT9218MB: 8 GbE PHYs (Port 0-7) + 2 GMACs (Port 8-9) + + Any port can be used as the CPU port. + +properties: + compatible: + const: motorcomm,yt9215 + + reg: + enum: [0x0, 0x1d] + + reset-gpios: + maxItems: 1 + + mdio: + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false + description: + Internal MDIO bus for the internal GbE PHYs. PHY 0-7 are used for Port + 0-7 respectively. + + mdio-external: + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false + description: + External MDIO bus to access external components. External PHYs for GMACs + (Port 8-9) are expected to be connected to the external MDIO bus in + vendor's reference design, but that is not a hard limitation from the + chip. + +required: + - compatible + - reg + +allOf: + - $ref: dsa.yaml#/$defs/ethernet-ports + +unevaluatedProperties: false + +examples: + - | + #include + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch@1d { + compatible = "motorcomm,yt9215"; + /* default 0x1d, alternate 0x0 */ + reg = <0x1d>; + reset-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + sw_phy0: phy@0 { + reg = <0x0>; + }; + + sw_phy1: phy@1 { + reg = <0x1>; + }; + + sw_phy2: phy@2 { + reg = <0x2>; + }; + + sw_phy3: phy@3 { + reg = <0x3>; + }; + + sw_phy4: phy@4 { + reg = <0x4>; + }; + }; + + mdio-external { + #address-cells = <1>; + #size-cells = <0>; + + phy1: phy@b { + reg = <0xb>; + }; + }; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-port@0 { + reg = <0>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&sw_phy0>; + }; + + ethernet-port@1 { + reg = <1>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&sw_phy1>; + }; + + ethernet-port@2 { + reg = <2>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&sw_phy2>; + }; + + ethernet-port@3 { + reg = <3>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&sw_phy3>; + }; + + ethernet-port@4 { + reg = <4>; + label = "lan5"; + phy-mode = "internal"; + phy-handle = <&sw_phy4>; + }; + + /* CPU port */ + ethernet-port@8 { + reg = <8>; + phy-mode = "2500base-x"; + ethernet = <ð0>; + + fixed-link { + speed = <2500>; + full-duplex; + }; + }; + + /* if external phy is connected to a MAC */ + ethernet-port@9 { + reg = <9>; + label = "wan"; + phy-mode = "rgmii-id"; + phy-handle = <&phy1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml index e9dd914b0734c4..607b7fe8d28ee0 100644 --- a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml +++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml @@ -41,6 +41,9 @@ properties: therefore discouraged. maxItems: 1 + clocks: + maxItems: 1 + spi-cpha: true spi-cpol: true diff --git a/Documentation/devicetree/bindings/net/dsa/realtek.yaml b/Documentation/devicetree/bindings/net/dsa/realtek.yaml index f348e66fb51583..473facd87a622f 100644 --- a/Documentation/devicetree/bindings/net/dsa/realtek.yaml +++ b/Documentation/devicetree/bindings/net/dsa/realtek.yaml @@ -10,7 +10,7 @@ allOf: - $ref: dsa.yaml#/$defs/ethernet-ports maintainers: - - Linus Walleij + - Linus Walleij description: Realtek advertises these chips as fast/gigabit switches or unmanaged diff --git a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.yaml b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.yaml index 51cf574249becd..c41f479bdee94f 100644 --- a/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.yaml +++ b/Documentation/devicetree/bindings/net/dsa/vitesse,vsc73xx.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Vitesse VSC73xx DSA Switches maintainers: - - Linus Walleij + - Linus Walleij description: The Vitesse DSA Switches were produced in the early-to-mid 2000s. diff --git a/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml b/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml new file mode 100644 index 00000000000000..91e8cd1db67b8e --- /dev/null +++ b/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml @@ -0,0 +1,129 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/eswin,eic7700-eth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Eswin EIC7700 SOC Eth Controller + +maintainers: + - Shuang Liang + - Zhi Li + - Shangjuan Wei + +description: + Platform glue layer implementation for STMMAC Ethernet driver. + +select: + properties: + compatible: + contains: + enum: + - eswin,eic7700-qos-eth + required: + - compatible + +allOf: + - $ref: snps,dwmac.yaml# + +properties: + compatible: + items: + - const: eswin,eic7700-qos-eth + - const: snps,dwmac-5.20 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-names: + const: macirq + + clocks: + items: + - description: AXI clock + - description: Configuration clock + - description: GMAC main clock + - description: Tx clock + + clock-names: + items: + - const: axi + - const: cfg + - const: stmmaceth + - const: tx + + resets: + maxItems: 1 + + reset-names: + items: + - const: stmmaceth + + rx-internal-delay-ps: + enum: [0, 200, 600, 1200, 1600, 1800, 2000, 2200, 2400] + + tx-internal-delay-ps: + enum: [0, 200, 600, 1200, 1600, 1800, 2000, 2200, 2400] + + eswin,hsp-sp-csr: + description: + HSP CSR is to control and get status of different high-speed peripherals + (such as Ethernet, USB, SATA, etc.) via register, which can tune + board-level's parameters of PHY, etc. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: Phandle to HSP(High-Speed Peripheral) device + - description: Offset of phy control register for internal + or external clock selection + - description: Offset of AXI clock controller Low-Power request + register + - description: Offset of register controlling TX/RX clock delay + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - interrupt-names + - phy-mode + - resets + - reset-names + - rx-internal-delay-ps + - tx-internal-delay-ps + - eswin,hsp-sp-csr + +unevaluatedProperties: false + +examples: + - | + ethernet@50400000 { + compatible = "eswin,eic7700-qos-eth", "snps,dwmac-5.20"; + reg = <0x50400000 0x10000>; + clocks = <&d0_clock 186>, <&d0_clock 171>, <&d0_clock 40>, + <&d0_clock 193>; + clock-names = "axi", "cfg", "stmmaceth", "tx"; + interrupt-parent = <&plic>; + interrupts = <61>; + interrupt-names = "macirq"; + phy-mode = "rgmii-id"; + phy-handle = <&phy0>; + resets = <&reset 95>; + reset-names = "stmmaceth"; + rx-internal-delay-ps = <200>; + tx-internal-delay-ps = <200>; + eswin,hsp-sp-csr = <&hsp_sp_csr 0x100 0x108 0x118>; + snps,axi-config = <&stmmac_axi_setup>; + snps,aal; + snps,fixed-burst; + snps,tso; + stmmac_axi_setup: stmmac-axi-config { + snps,blen = <0 0 0 0 16 8 4>; + snps,rd_osr_lmt = <2>; + snps,wr_osr_lmt = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index 2ec2d9fda7e30f..bb4c49fc5fd889 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -35,9 +35,13 @@ properties: description: PHYs that implement IEEE802.3 clause 45 - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$" description: - If the PHY reports an incorrect ID (or none at all) then the - compatible list may contain an entry with the correct PHY ID - in the above form. + PHYs contain identification registers. These will be read to + identify the PHY. If the PHY reports an incorrect ID, or the + PHY requires a specific initialization sequence (like a + particular order of clocks, resets, power supplies), in + order to be able to read the ID registers, then the + compatible list must contain an entry with the correct PHY + ID in the above form. The first group of digits is the 16 bit Phy Identifier 1 register, this is the chip vendor OUI bits 3:18. The second group of digits is the Phy Identifier 2 register, diff --git a/Documentation/devicetree/bindings/net/ethernet-switch.yaml b/Documentation/devicetree/bindings/net/ethernet-switch.yaml index b3b7e1a1b12787..6bb68f7dbc7f72 100644 --- a/Documentation/devicetree/bindings/net/ethernet-switch.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-switch.yaml @@ -35,14 +35,14 @@ allOf: then: properties: $nodename: - pattern: "switch[0-3]@[0-3]+$" + pattern: 'switch[0-3]@[0-3]+$' else: properties: $nodename: - pattern: "^(ethernet-)?switch(@.*)?$" + pattern: '^(ethernet-)?switch(@.*)?$' patternProperties: - "^(ethernet-)?ports$": + '^(ethernet-)?ports$': type: object unevaluatedProperties: false @@ -53,13 +53,13 @@ patternProperties: const: 0 patternProperties: - "^(ethernet-)?port@[0-9a-f]+$": + '^(ethernet-)?port@[0-9a-f]+$': type: object description: Ethernet switch ports required: - - "#address-cells" - - "#size-cells" + - '#address-cells' + - '#size-cells' oneOf: - required: @@ -75,9 +75,9 @@ $defs: $ref: '#' patternProperties: - "^(ethernet-)?ports$": + '^(ethernet-)?ports$': patternProperties: - "^(ethernet-)?port@[0-9a-f]+$": + '^(ethernet-)?port@[0-9a-f]+$': description: Ethernet switch ports $ref: ethernet-switch-port.yaml# unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/net/fsl,enetc.yaml b/Documentation/devicetree/bindings/net/fsl,enetc.yaml index ca70f005017113..aac20ab72ace7a 100644 --- a/Documentation/devicetree/bindings/net/fsl,enetc.yaml +++ b/Documentation/devicetree/bindings/net/fsl,enetc.yaml @@ -27,6 +27,7 @@ properties: - const: fsl,enetc - enum: - pci1131,e101 + - pci1131,e110 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/fsl,gianfar.yaml b/Documentation/devicetree/bindings/net/fsl,gianfar.yaml index f92f284aa05b0e..0d8909770ccbf9 100644 --- a/Documentation/devicetree/bindings/net/fsl,gianfar.yaml +++ b/Documentation/devicetree/bindings/net/fsl,gianfar.yaml @@ -167,8 +167,6 @@ allOf: - description: Receive interrupt - description: Error interrupt - - unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/net/intel,ixp46x-ptp-timer.yaml b/Documentation/devicetree/bindings/net/intel,ixp46x-ptp-timer.yaml index f92730b1d2fad2..80336b7e64eccd 100644 --- a/Documentation/devicetree/bindings/net/intel,ixp46x-ptp-timer.yaml +++ b/Documentation/devicetree/bindings/net/intel,ixp46x-ptp-timer.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Intel IXP46x PTP Timer (TSYNC) maintainers: - - Linus Walleij + - Linus Walleij description: | The Intel IXP46x PTP timer is known in the manual as IEEE1588 Hardware diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml index 8689de1aaea15f..3b8f83b7099d3f 100644 --- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml @@ -11,7 +11,7 @@ allOf: - $ref: ethernet-controller.yaml# maintainers: - - Linus Walleij + - Linus Walleij description: | The Intel IXP4xx ethernet makes use of the IXP4xx NPE (Network diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml index 7a405e9b37b2c8..1d952735c81b6a 100644 --- a/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Intel IXP4xx V.35 WAN High Speed Serial Link (HSS) maintainers: - - Linus Walleij + - Linus Walleij description: | The Intel IXP4xx HSS makes use of the IXP4xx NPE (Network diff --git a/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt b/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt deleted file mode 100644 index 957e5e5c2927c5..00000000000000 --- a/Documentation/devicetree/bindings/net/marvell-bt-8xxx.txt +++ /dev/null @@ -1,83 +0,0 @@ -Marvell 8897/8997 (sd8897/sd8997) bluetooth devices (SDIO or USB based) ------- -The 8997 devices supports multiple interfaces. When used on SDIO interfaces, -the btmrvl driver is used and when used on USB interface, the btusb driver is -used. - -Required properties: - - - compatible : should be one of the following: - * "marvell,sd8897-bt" (for SDIO) - * "marvell,sd8997-bt" (for SDIO) - * "usb1286,204e" (for USB) - -Optional properties: - - - marvell,cal-data: Calibration data downloaded to the device during - initialization. This is an array of 28 values(u8). - This is only applicable to SDIO devices. - - - marvell,wakeup-pin: It represents wakeup pin number of the bluetooth chip. - firmware will use the pin to wakeup host system (u16). - - marvell,wakeup-gap-ms: wakeup gap represents wakeup latency of the host - platform. The value will be configured to firmware. This - is needed to work chip's sleep feature as expected (u16). - - interrupt-names: Used only for USB based devices (See below) - - interrupts : specifies the interrupt pin number to the cpu. For SDIO, the - driver will use the first interrupt specified in the interrupt - array. For USB based devices, the driver will use the interrupt - named "wakeup" from the interrupt-names and interrupt arrays. - The driver will request an irq based on this interrupt number. - During system suspend, the irq will be enabled so that the - bluetooth chip can wakeup host platform under certain - conditions. During system resume, the irq will be disabled - to make sure unnecessary interrupt is not received. - -Example: - -IRQ pin 119 is used as system wakeup source interrupt. -wakeup pin 13 and gap 100ms are configured so that firmware can wakeup host -using this device side pin and wakeup latency. - -Example for SDIO device follows (calibration data is also available in -below example). - -&mmc3 { - vmmc-supply = <&wlan_en_reg>; - bus-width = <4>; - cap-power-off-card; - keep-power-in-suspend; - - #address-cells = <1>; - #size-cells = <0>; - btmrvl: bluetooth@2 { - compatible = "marvell,sd8897-bt"; - reg = <2>; - interrupt-parent = <&pio>; - interrupts = <119 IRQ_TYPE_LEVEL_LOW>; - - marvell,cal-data = /bits/ 8 < - 0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02 - 0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00 - 0x00 0x00 0xf0 0x00>; - marvell,wakeup-pin = /bits/ 16 <0x0d>; - marvell,wakeup-gap-ms = /bits/ 16 <0x64>; - }; -}; - -Example for USB device: - -&usb_host1_ohci { - #address-cells = <1>; - #size-cells = <0>; - - mvl_bt1: bt@1 { - compatible = "usb1286,204e"; - reg = <1>; - interrupt-parent = <&gpio0>; - interrupt-names = "wakeup"; - interrupts = <119 IRQ_TYPE_LEVEL_LOW>; - marvell,wakeup-pin = /bits/ 16 <0x0d>; - marvell,wakeup-gap-ms = /bits/ 16 <0x64>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.yaml b/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.yaml index 282987074ee4f3..23947ba6aeaf1b 100644 --- a/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.yaml +++ b/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.yaml @@ -14,7 +14,6 @@ description: |+ of a mux producer device. The mux producer can be of any type like mmio mux producer, gpio mux producer or generic register based mux producer. - allOf: - $ref: /schemas/net/mdio-mux.yaml# diff --git a/Documentation/devicetree/bindings/net/mediatek,net.yaml b/Documentation/devicetree/bindings/net/mediatek,net.yaml index b45f67f92e80dc..cc346946291af5 100644 --- a/Documentation/devicetree/bindings/net/mediatek,net.yaml +++ b/Documentation/devicetree/bindings/net/mediatek,net.yaml @@ -112,7 +112,7 @@ properties: mediatek,wed: $ref: /schemas/types.yaml#/definitions/phandle-array - minItems: 2 + minItems: 1 maxItems: 2 items: maxItems: 1 @@ -249,6 +249,9 @@ allOf: minItems: 1 maxItems: 1 + mediatek,wed: + minItems: 2 + mediatek,wed-pcie: false else: properties: @@ -338,12 +341,13 @@ allOf: - const: netsys0 - const: netsys1 - mediatek,infracfg: false - mediatek,sgmiisys: minItems: 2 maxItems: 2 + mediatek,wed: + maxItems: 1 + - if: properties: compatible: @@ -385,6 +389,9 @@ allOf: minItems: 2 maxItems: 2 + mediatek,wed: + minItems: 2 + - if: properties: compatible: @@ -429,6 +436,19 @@ allOf: - const: xgp2 - const: xgp3 + mediatek,wed: + minItems: 2 + + - if: + properties: + compatible: + contains: + const: ralink,rt5350-eth + then: + properties: + mediatek,wed: + minItems: 2 + patternProperties: "^mac@[0-2]$": type: object diff --git a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt deleted file mode 100644 index 0a3647fe331b6f..00000000000000 --- a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.txt +++ /dev/null @@ -1,73 +0,0 @@ -* Microsemi - vsc8531 Giga bit ethernet phy - -Optional properties: -- vsc8531,vddmac : The vddmac in mV. Allowed values is listed - in the first row of Table 1 (below). - This property is only used in combination - with the 'edge-slowdown' property. - Default value is 3300. -- vsc8531,edge-slowdown : % the edge should be slowed down relative to - the fastest possible edge time. - Edge rate sets the drive strength of the MAC - interface output signals. Changing the - drive strength will affect the edge rate of - the output signal. The goal of this setting - is to help reduce electrical emission (EMI) - by being able to reprogram drive strength - and in effect slow down the edge rate if - desired. - To adjust the edge-slowdown, the 'vddmac' - must be specified. Table 1 lists the - supported edge-slowdown values for a given - 'vddmac'. - Default value is 0%. - Ref: Table:1 - Edge rate change (below). -- vsc8531,led-[N]-mode : LED mode. Specify how the LED[N] should behave. - N depends on the number of LEDs supported by a - PHY. - Allowed values are defined in - "include/dt-bindings/net/mscc-phy-vsc8531.h". - Default values are VSC8531_LINK_1000_ACTIVITY (1), - VSC8531_LINK_100_ACTIVITY (2), - VSC8531_LINK_ACTIVITY (0) and - VSC8531_DUPLEX_COLLISION (8). -- load-save-gpios : GPIO used for the load/save operation of the PTP - hardware clock (PHC). - - -Table: 1 - Edge rate change -----------------------------------------------------------------| -| Edge Rate Change (VDDMAC) | -| | -| 3300 mV 2500 mV 1800 mV 1500 mV | -|---------------------------------------------------------------| -| 0% 0% 0% 0% | -| (Fastest) (recommended) (recommended) | -|---------------------------------------------------------------| -| 2% 3% 5% 6% | -|---------------------------------------------------------------| -| 4% 6% 9% 14% | -|---------------------------------------------------------------| -| 7% 10% 16% 21% | -|(recommended) (recommended) | -|---------------------------------------------------------------| -| 10% 14% 23% 29% | -|---------------------------------------------------------------| -| 17% 23% 35% 42% | -|---------------------------------------------------------------| -| 29% 37% 52% 58% | -|---------------------------------------------------------------| -| 53% 63% 76% 77% | -| (slowest) | -|---------------------------------------------------------------| - -Example: - - vsc8531_0: ethernet-phy@0 { - compatible = "ethernet-phy-id0007.0570"; - vsc8531,vddmac = <3300>; - vsc8531,edge-slowdown = <7>; - vsc8531,led-0-mode = ; - vsc8531,led-1-mode = ; - load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>; - }; diff --git a/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.yaml b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.yaml new file mode 100644 index 00000000000000..0afbd0ff126f5e --- /dev/null +++ b/Documentation/devicetree/bindings/net/mscc-phy-vsc8531.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mscc-phy-vsc8531.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microsemi VSC8531 Gigabit Ethernet PHY + +maintainers: + - Lad Prabhakar + +description: + The VSC8531 is a Gigabit Ethernet PHY with configurable MAC interface + drive strength and LED modes. + +allOf: + - $ref: ethernet-phy.yaml# + +select: + properties: + compatible: + contains: + enum: + - ethernet-phy-id0007.0570 # VSC8531 + - ethernet-phy-id0007.0772 # VSC8541 + required: + - compatible + +properties: + compatible: + items: + - enum: + - ethernet-phy-id0007.0570 # VSC8531 + - ethernet-phy-id0007.0772 # VSC8541 + - const: ethernet-phy-ieee802.3-c22 + + vsc8531,vddmac: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The VDDMAC voltage in millivolts. This property is used in combination + with the edge-slowdown property to control the drive strength of the + MAC interface output signals. + enum: [3300, 2500, 1800, 1500] + default: 3300 + + vsc8531,edge-slowdown: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + Percentage by which the edge rate should be slowed down relative to + the fastest possible edge time. This setting helps reduce electromagnetic + interference (EMI) by adjusting the drive strength of the MAC interface + output signals. Valid values depend on the vddmac voltage setting + according to the edge rate change table in the datasheet. + + - When vsc8531,vddmac = 3300 mV: allowed values are 0, 2, 4, 7, 10, 17, 29, and 53. + (Recommended: 7) + - When vsc8531,vddmac = 2500 mV: allowed values are 0, 3, 6, 10, 14, 23, 37, and 63. + (Recommended: 10) + - When vsc8531,vddmac = 1800 mV: allowed values are 0, 5, 9, 16, 23, 35, 52, and 76. + (Recommended: 0) + - When vsc8531,vddmac = 1500 mV: allowed values are 0, 6, 14, 21, 29, 42, 58, and 77. + (Recommended: 0) + enum: [0, 2, 3, 4, 5, 6, 7, 9, 10, 14, 16, 17, 21, 23, 29, 35, 37, 42, 52, 53, 58, 63, 76, 77] + default: 0 + + vsc8531,led-0-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: LED[0] behavior mode. See include/dt-bindings/net/mscc-phy-vsc8531.h + for available modes. + minimum: 0 + maximum: 15 + default: 1 + + vsc8531,led-1-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: LED[1] behavior mode. See include/dt-bindings/net/mscc-phy-vsc8531.h + for available modes. + minimum: 0 + maximum: 15 + default: 2 + + vsc8531,led-2-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: LED[2] behavior mode. See include/dt-bindings/net/mscc-phy-vsc8531.h + for available modes. + minimum: 0 + maximum: 15 + default: 0 + + vsc8531,led-3-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: LED[3] behavior mode. See include/dt-bindings/net/mscc-phy-vsc8531.h + for available modes. + minimum: 0 + maximum: 15 + default: 8 + + load-save-gpios: + description: GPIO phandle used for the load/save operation of the PTP hardware + clock (PHC). + maxItems: 1 + +dependencies: + vsc8531,edge-slowdown: + - vsc8531,vddmac + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include + #include + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@0 { + compatible = "ethernet-phy-id0007.0772", "ethernet-phy-ieee802.3-c22"; + reg = <0>; + vsc8531,vddmac = <3300>; + vsc8531,edge-slowdown = <7>; + vsc8531,led-0-mode = ; + vsc8531,led-1-mode = ; + load-save-gpios = <&gpio 10 GPIO_ACTIVE_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/nxp,netc-blk-ctrl.yaml b/Documentation/devicetree/bindings/net/nxp,netc-blk-ctrl.yaml index 97389fd5dbbfa2..deea4fd73d767b 100644 --- a/Documentation/devicetree/bindings/net/nxp,netc-blk-ctrl.yaml +++ b/Documentation/devicetree/bindings/net/nxp,netc-blk-ctrl.yaml @@ -21,6 +21,7 @@ maintainers: properties: compatible: enum: + - nxp,imx94-netc-blk-ctrl - nxp,imx95-netc-blk-ctrl reg: diff --git a/Documentation/devicetree/bindings/net/pse-pd/ti,tps23881.yaml b/Documentation/devicetree/bindings/net/pse-pd/ti,tps23881.yaml index bb1ee339865550..0b3803f647b7b5 100644 --- a/Documentation/devicetree/bindings/net/pse-pd/ti,tps23881.yaml +++ b/Documentation/devicetree/bindings/net/pse-pd/ti,tps23881.yaml @@ -16,6 +16,7 @@ properties: compatible: enum: - ti,tps23881 + - ti,tps23881b reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml index e7ee0d9efed833..423959cb928d94 100644 --- a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml @@ -73,6 +73,14 @@ properties: dma-coherent: true + interconnects: + maxItems: 2 + + interconnect-names: + items: + - const: cpu-mac + - const: mac-mem + phys: true phy-names: diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index b4a79912d4739b..c7f5f2ef745210 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -24,7 +24,6 @@ description: iommu/iommu.txt and iommu/arm,smmu.yaml for more information about SMMU bindings. - - | -------- --------- | | | | diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml index 0ac7c4b47d6bff..d17112527dab0a 100644 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml @@ -24,6 +24,7 @@ select: - rockchip,rk3366-gmac - rockchip,rk3368-gmac - rockchip,rk3399-gmac + - rockchip,rk3506-gmac - rockchip,rk3528-gmac - rockchip,rk3568-gmac - rockchip,rk3576-gmac @@ -50,6 +51,7 @@ properties: - rockchip,rv1108-gmac - items: - enum: + - rockchip,rk3506-gmac - rockchip,rk3528-gmac - rockchip,rk3568-gmac - rockchip,rk3576-gmac @@ -148,6 +150,7 @@ allOf: compatible: contains: enum: + - rockchip,rk3506-gmac - rockchip,rk3528-gmac then: properties: diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 658c004e6a5c83..dd3c72e8363e70 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -86,10 +86,14 @@ properties: - rockchip,rk3328-gmac - rockchip,rk3366-gmac - rockchip,rk3368-gmac + - rockchip,rk3399-gmac + - rockchip,rk3506-gmac + - rockchip,rk3528-gmac + - rockchip,rk3568-gmac - rockchip,rk3576-gmac - rockchip,rk3588-gmac - - rockchip,rk3399-gmac - rockchip,rv1108-gmac + - rockchip,rv1126-gmac - snps,dwmac - snps,dwmac-3.40a - snps,dwmac-3.50a diff --git a/Documentation/devicetree/bindings/net/sophgo,sg2044-dwmac.yaml b/Documentation/devicetree/bindings/net/sophgo,sg2044-dwmac.yaml index ce21979a2d9a43..e8d3814db0e94f 100644 --- a/Documentation/devicetree/bindings/net/sophgo,sg2044-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/sophgo,sg2044-dwmac.yaml @@ -70,6 +70,25 @@ required: allOf: - $ref: snps,dwmac.yaml# + - if: + properties: + compatible: + contains: + const: sophgo,sg2042-dwmac + then: + properties: + phy-mode: + enum: + - rgmii-rxid + - rgmii-id + else: + properties: + phy-mode: + enum: + - rgmii + - rgmii-rxid + - rgmii-txid + - rgmii-id unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml index d14ca81f70e08b..8b5da602a2e8d0 100644 --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml @@ -156,7 +156,6 @@ patternProperties: CPSW MDIO bus. $ref: ti,davinci-mdio.yaml# - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml index eabceb849537c4..ae6b97cdc44ba4 100644 --- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml +++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml @@ -151,6 +151,12 @@ properties: - ETSI - JP + country: + $ref: /schemas/types.yaml#/definitions/string + pattern: '^[A-Z]{2}$' + description: + ISO 3166-1 alpha-2 country code for power limits + patternProperties: "^txpower-[256]g$": type: object @@ -210,6 +216,66 @@ properties: minItems: 13 maxItems: 13 + paths-cck: + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 4 + maxItems: 4 + description: + 4 half-dBm backoff values (1 - 4 antennas, single spacial + stream) + + paths-ofdm: + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 4 + maxItems: 4 + description: + 4 half-dBm backoff values (1 - 4 antennas, single spacial + stream) + + paths-ofdm-bf: + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 4 + maxItems: 4 + description: + 4 half-dBm backoff values for beamforming + (1 - 4 antennas, single spacial stream) + + paths-ru: + $ref: /schemas/types.yaml#/definitions/uint8-matrix + description: + Sets of half-dBm backoff values for 802.11ax rates for + 1T1ss (aka 1 transmitting antenna with 1 spacial stream), + 2T1ss, 3T1ss, 4T1ss, 2T2ss, 3T2ss, 4T2ss, 3T3ss, 4T3ss + and 4T4ss. + Each set starts with the number of channel bandwidth or + resource unit settings for which the rate set applies, + followed by 10 power limit values. The order of the + channel resource unit settings is RU26, RU52, RU106, + RU242/SU20, RU484/SU40, RU996/SU80 and RU2x996/SU160. + minItems: 1 + maxItems: 7 + items: + minItems: 11 + maxItems: 11 + + paths-ru-bf: + $ref: /schemas/types.yaml#/definitions/uint8-matrix + description: + Sets of half-dBm backoff (beamforming) values for 802.11ax + rates for 1T1ss (aka 1 transmitting antenna with 1 spacial + stream), 2T1ss, 3T1ss, 4T1ss, 2T2ss, 3T2ss, 4T2ss, 3T3ss, + 4T3ss and 4T4ss. + Each set starts with the number of channel bandwidth or + resource unit settings for which the rate set applies, + followed by 10 power limit values. The order of the + channel resource unit settings is RU26, RU52, RU106, + RU242/SU20, RU484/SU40, RU996/SU80 and RU2x996/SU160. + minItems: 1 + maxItems: 7 + items: + minItems: 11 + maxItems: 11 + txs-delta: $ref: /schemas/types.yaml#/definitions/uint32-array description: diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml index 75c9489f319b27..9de5fdefcbcc34 100644 --- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml +++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml @@ -50,7 +50,6 @@ properties: Points to the node of the regulator that powers/enable the wl12xx/wl18xx chip. This is required when connected via SPI. - ref-clock-frequency: $ref: /schemas/types.yaml#/definitions/uint32 description: Reference clock frequency. diff --git a/Documentation/devicetree/bindings/npu/arm,ethos.yaml b/Documentation/devicetree/bindings/npu/arm,ethos.yaml new file mode 100644 index 00000000000000..716c4997f97652 --- /dev/null +++ b/Documentation/devicetree/bindings/npu/arm,ethos.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/npu/arm,ethos.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm Ethos U65/U85 + +maintainers: + - Rob Herring + +description: > + The Arm Ethos-U NPUs are designed for IoT inference applications. The NPUs + can accelerate 8-bit and 16-bit integer quantized networks: + + Transformer networks (U85 only) + Convolutional Neural Networks (CNN) + Recurrent Neural Networks (RNN) + + Further documentation is available here: + + U65 TRM: https://developer.arm.com/documentation/102023/ + U85 TRM: https://developer.arm.com/documentation/102685/ + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,imx93-npu + - const: arm,ethos-u65 + - items: + - {} + - const: arm,ethos-u85 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: core + - const: apb + + power-domains: + maxItems: 1 + + sram: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include + #include + #include + + npu@4a900000 { + compatible = "fsl,imx93-npu", "arm,ethos-u65"; + reg = <0x4a900000 0x1000>; + interrupts = ; + power-domains = <&mlmix>; + clocks = <&clk IMX93_CLK_ML>, <&clk IMX93_CLK_ML_APB>; + clock-names = "core", "apb"; + sram = <&sram>; + }; +... diff --git a/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt b/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt deleted file mode 100644 index 0415265c215a64..00000000000000 --- a/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt +++ /dev/null @@ -1,17 +0,0 @@ -Broadcom OTP memory controller - -Required Properties: -- compatible: "brcm,ocotp" for the first generation Broadcom OTPC which is used - in Cygnus and supports 32 bit read/write. Use "brcm,ocotp-v2" for the second - generation Broadcom OTPC which is used in SoC's such as Stingray and supports - 64-bit read/write. -- reg: Base address of the OTP controller. -- brcm,ocotp-size: Amount of memory available, in 32 bit words - -Example: - -otp: otp@301c800 { - compatible = "brcm,ocotp"; - reg = <0x0301c800 0x2c>; - brcm,ocotp-size = <2048>; -}; diff --git a/Documentation/devicetree/bindings/nvmem/brcm,ocotp.yaml b/Documentation/devicetree/bindings/nvmem/brcm,ocotp.yaml new file mode 100644 index 00000000000000..ffad2841748854 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/brcm,ocotp.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/nvmem/brcm,ocotp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom OTP memory controller + +maintainers: + - Ray Jui + - Scott Branden + +properties: + compatible: + enum: + - brcm,ocotp + - brcm,ocotp-v2 + + reg: + maxItems: 1 + + brcm,ocotp-size: + description: Amount of memory available, in 32-bit words + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - brcm,ocotp-size + +additionalProperties: false + +examples: + - | + otp@301c800 { + compatible = "brcm,ocotp"; + reg = <0x0301c800 0x2c>; + brcm,ocotp-size = <2048>; + }; diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml index b2cb76cf9053a8..a8076d0e2737c4 100644 --- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml +++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.yaml @@ -14,7 +14,8 @@ maintainers: description: | This binding represents the on-chip eFuse OTP controller found on i.MX6Q/D, i.MX6DL/S, i.MX6SL, i.MX6SX, i.MX6UL, i.MX6ULL/ULZ, i.MX6SLL, - i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN i.MX8MP and i.MX93/5 SoCs. + i.MX7D/S, i.MX7ULP, i.MX8MQ, i.MX8MM, i.MX8MN i.MX8MP, i.MX93, i.MX94, + and i.MX95. allOf: - $ref: nvmem.yaml# @@ -36,6 +37,7 @@ properties: - fsl,imx8mq-ocotp - fsl,imx8mm-ocotp - fsl,imx93-ocotp + - fsl,imx94-ocotp - fsl,imx95-ocotp - const: syscon - items: diff --git a/Documentation/devicetree/bindings/nvmem/layouts/u-boot,env.yaml b/Documentation/devicetree/bindings/nvmem/layouts/u-boot,env.yaml index 56a8f55d4a096c..e9e75c38bd119e 100644 --- a/Documentation/devicetree/bindings/nvmem/layouts/u-boot,env.yaml +++ b/Documentation/devicetree/bindings/nvmem/layouts/u-boot,env.yaml @@ -46,6 +46,12 @@ properties: type: object description: Command to use for automatic booting + env-size: + description: + Size in bytes of the environment data used by U-Boot for CRC + calculation. If omitted, the full NVMEM region size is used. + $ref: /schemas/types.yaml#/definitions/uint32 + ethaddr: type: object description: Ethernet interfaces base MAC address. @@ -104,6 +110,7 @@ examples: partition-u-boot-env { compatible = "brcm,env"; + env-size = <0x20000>; ethaddr { }; diff --git a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml index 4dc0d42df3e6c3..c9bf34ee0efb66 100644 --- a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml +++ b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml @@ -25,7 +25,9 @@ properties: compatible: oneOf: - items: - - const: mediatek,mt8188-efuse + - enum: + - mediatek,mt8188-efuse + - mediatek,mt8189-efuse - const: mediatek,mt8186-efuse - const: mediatek,mt8186-efuse @@ -48,6 +50,7 @@ properties: - mediatek,mt7988-efuse - mediatek,mt8173-efuse - mediatek,mt8183-efuse + - mediatek,mt8189-efuse - mediatek,mt8192-efuse - mediatek,mt8195-efuse - mediatek,mt8516-efuse diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml index 3f6dc6a3a9f1ad..7d1612acca48d2 100644 --- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml +++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml @@ -39,6 +39,7 @@ properties: - qcom,qcs404-qfprom - qcom,qcs615-qfprom - qcom,qcs8300-qfprom + - qcom,sa8775p-qfprom - qcom,sar2130p-qfprom - qcom,sc7180-qfprom - qcom,sc7280-qfprom diff --git a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml index 3b2aa605a5515c..ab4cdc4e361485 100644 --- a/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml +++ b/Documentation/devicetree/bindings/nvmem/st,stm32-romem.yaml @@ -31,7 +31,7 @@ properties: maxItems: 1 patternProperties: - "^.*@[0-9a-f]+$": + "@[0-9a-f]+$": type: object $ref: layouts/fixed-cell.yaml unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/pci/altr,pcie-root-port.yaml b/Documentation/devicetree/bindings/pci/altr,pcie-root-port.yaml index 5d3f48a001b71c..f516db47ab20f1 100644 --- a/Documentation/devicetree/bindings/pci/altr,pcie-root-port.yaml +++ b/Documentation/devicetree/bindings/pci/altr,pcie-root-port.yaml @@ -93,7 +93,6 @@ allOf: reg-names: minItems: 3 - unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml b/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml index 79a21ba0f9fd62..d67cb7a850a37f 100644 --- a/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml @@ -20,9 +20,10 @@ allOf: select: properties: compatible: - enum: - - amlogic,axg-pcie - - amlogic,g12a-pcie + contains: + enum: + - amlogic,axg-pcie + - amlogic,g12a-pcie required: - compatible @@ -36,13 +37,13 @@ properties: reg: items: - - description: External local bus interface registers + - description: Data Bus Interface registers - description: Meson designed configuration registers - description: PCIe configuration space reg-names: items: - - const: elbi + - const: dbi - const: cfg - const: config @@ -51,15 +52,15 @@ properties: clocks: items: + - description: PCIe PHY clock - description: PCIe GEN 100M PLL clock - description: PCIe RC clock gate - - description: PCIe PHY clock clock-names: items: + - const: general - const: pclk - const: port - - const: general phys: maxItems: 1 @@ -88,7 +89,7 @@ required: - reg - reg-names - interrupts - - clock + - clocks - clock-names - "#address-cells" - "#size-cells" @@ -113,10 +114,10 @@ examples: pcie: pcie@f9800000 { compatible = "amlogic,axg-pcie", "snps,dw-pcie"; reg = <0xf9800000 0x400000>, <0xff646000 0x2000>, <0xf9f00000 0x100000>; - reg-names = "elbi", "cfg", "config"; + reg-names = "dbi", "cfg", "config"; interrupts = ; - clocks = <&pclk>, <&clk_port>, <&clk_phy>; - clock-names = "pclk", "port", "general"; + clocks = <&clk_phy>, <&pclk>, <&clk_port>; + clock-names = "general", "pclk", "port"; resets = <&reset_pcie_port>, <&reset_pcie_apb>; reset-names = "port", "apb"; phys = <&pcie_phy>; diff --git a/Documentation/devicetree/bindings/pci/cix,sky1-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cix,sky1-pcie-host.yaml new file mode 100644 index 00000000000000..b910a42e0843da --- /dev/null +++ b/Documentation/devicetree/bindings/pci/cix,sky1-pcie-host.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/cix,sky1-pcie-host.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: CIX Sky1 PCIe Root Complex + +maintainers: + - Hans Zhang + +description: + PCIe root complex controller based on the Cadence PCIe core. + +allOf: + - $ref: /schemas/pci/pci-host-bridge.yaml# + +properties: + compatible: + const: cix,sky1-pcie-host + + reg: + items: + - description: PCIe controller registers. + - description: ECAM registers. + - description: Remote CIX System Unit strap registers. + - description: Remote CIX System Unit status registers. + - description: Region for sending messages registers. + + reg-names: + items: + - const: reg + - const: cfg + - const: rcsu_strap + - const: rcsu_status + - const: msg + + ranges: + maxItems: 3 + +required: + - compatible + - ranges + - bus-range + - device_type + - interrupt-map + - interrupt-map-mask + - msi-map + +unevaluatedProperties: false + +examples: + - | + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@a010000 { + compatible = "cix,sky1-pcie-host"; + reg = <0x00 0x0a010000 0x00 0x10000>, + <0x00 0x2c000000 0x00 0x4000000>, + <0x00 0x0a000300 0x00 0x100>, + <0x00 0x0a000400 0x00 0x100>, + <0x00 0x60000000 0x00 0x00100000>; + reg-names = "reg", "cfg", "rcsu_strap", "rcsu_status", "msg"; + ranges = <0x01000000 0x00 0x60100000 0x00 0x60100000 0x00 0x00100000>, + <0x02000000 0x00 0x60200000 0x00 0x60200000 0x00 0x1fe00000>, + <0x43000000 0x18 0x00000000 0x18 0x00000000 0x04 0x00000000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0xc0 0xff>; + device_type = "pci"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 2 &gic 0 0 GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 3 &gic 0 0 GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 4 &gic 0 0 GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH 0>; + msi-map = <0xc000 &gic_its 0xc000 0x4000>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml b/Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml index 378dd1c8e2ee2e..fed393a8956337 100644 --- a/Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml +++ b/Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Faraday Technology FTPCI100 PCI Host Bridge maintainers: - - Linus Walleij + - Linus Walleij description: | This PCI bridge is found inside that Cortina Systems Gemini SoC platform and diff --git a/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml b/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml index 3cae2e0f7f5e26..c1806aef7bac4d 100644 --- a/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml +++ b/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Intel IXP4xx PCI controller maintainers: - - Linus Walleij + - Linus Walleij description: PCI host controller found in the Intel IXP4xx SoC series. diff --git a/Documentation/devicetree/bindings/pci/loongson.yaml b/Documentation/devicetree/bindings/pci/loongson.yaml index 1988465e73a121..e5bba63aa9479c 100644 --- a/Documentation/devicetree/bindings/pci/loongson.yaml +++ b/Documentation/devicetree/bindings/pci/loongson.yaml @@ -32,7 +32,6 @@ properties: minItems: 1 maxItems: 3 - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-mt7623.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-mt7623.yaml new file mode 100644 index 00000000000000..e33bcc216e30cf --- /dev/null +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-mt7623.yaml @@ -0,0 +1,164 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/mediatek-pcie-mt7623.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PCIe controller on MediaTek SoCs + +maintainers: + - Christian Marangi + +properties: + compatible: + enum: + - mediatek,mt2701-pcie + - mediatek,mt7623-pcie + + reg: + minItems: 4 + maxItems: 4 + + reg-names: + items: + - const: subsys + - const: port0 + - const: port1 + - const: port2 + + clocks: + minItems: 4 + maxItems: 4 + + clock-names: + items: + - const: free_ck + - const: sys_ck0 + - const: sys_ck1 + - const: sys_ck2 + + resets: + minItems: 3 + maxItems: 3 + + reset-names: + items: + - const: pcie-rst0 + - const: pcie-rst1 + - const: pcie-rst2 + + phys: + minItems: 3 + maxItems: 3 + + phy-names: + items: + - const: pcie-phy0 + - const: pcie-phy1 + - const: pcie-phy2 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - ranges + - clocks + - clock-names + - '#interrupt-cells' + - resets + - reset-names + - phys + - phy-names + - power-domains + - pcie@0,0 + - pcie@1,0 + - pcie@2,0 + +allOf: + - $ref: /schemas/pci/pci-host-bridge.yaml# + +unevaluatedProperties: false + +examples: + # MT7623 + - | + #include + #include + #include + #include + #include + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1a140000 { + compatible = "mediatek,mt7623-pcie"; + device_type = "pci"; + reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */ + <0 0x1a142000 0 0x1000>, /* Port0 registers */ + <0 0x1a143000 0 0x1000>, /* Port1 registers */ + <0 0x1a144000 0 0x1000>; /* Port2 registers */ + reg-names = "subsys", "port0", "port1", "port2"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 0>; + interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>, + <0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>, + <0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_ETHIF_SEL>, + <&hifsys CLK_HIFSYS_PCIE0>, + <&hifsys CLK_HIFSYS_PCIE1>, + <&hifsys CLK_HIFSYS_PCIE2>; + clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2"; + resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>, + <&hifsys MT2701_HIFSYS_PCIE1_RST>, + <&hifsys MT2701_HIFSYS_PCIE2_RST>; + reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2"; + phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>, + <&pcie2_phy PHY_TYPE_PCIE>; + phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>; + bus-range = <0x00 0xff>; + ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000>, /* I/O space */ + <0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>; /* memory space */ + + pcie@0,0 { + device_type = "pci"; + reg = <0x0000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>; + ranges; + }; + + pcie@1,0 { + device_type = "pci"; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>; + ranges; + }; + + pcie@2,0 { + device_type = "pci"; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; + ranges; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt deleted file mode 100644 index 684227522267f9..00000000000000 --- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt +++ /dev/null @@ -1,289 +0,0 @@ -MediaTek Gen2 PCIe controller - -Required properties: -- compatible: Should contain one of the following strings: - "mediatek,mt2701-pcie" - "mediatek,mt2712-pcie" - "mediatek,mt7622-pcie" - "mediatek,mt7623-pcie" - "mediatek,mt7629-pcie" - "airoha,en7523-pcie" -- device_type: Must be "pci" -- reg: Base addresses and lengths of the root ports. -- reg-names: Names of the above areas to use during resource lookup. -- #address-cells: Address representation for root ports (must be 3) -- #size-cells: Size representation for root ports (must be 2) -- clocks: Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names: - Mandatory entries: - - sys_ckN :transaction layer and data link layer clock - Required entries for MT2701/MT7623: - - free_ck :for reference clock of PCIe subsys - Required entries for MT2712/MT7622: - - ahb_ckN :AHB slave interface operating clock for CSR access and RC - initiated MMIO access - Required entries for MT7622: - - axi_ckN :application layer MMIO channel operating clock - - aux_ckN :pe2_mac_bridge and pe2_mac_core operating clock when - pcie_mac_ck/pcie_pipe_ck is turned off - - obff_ckN :OBFF functional block operating clock - - pipe_ckN :LTSSM and PHY/MAC layer operating clock - where N starting from 0 to one less than the number of root ports. -- phys: List of PHY specifiers (used by generic PHY framework). -- phy-names : Must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the - number of PHYs as specified in *phys* property. -- power-domains: A phandle and power domain specifier pair to the power domain - which is responsible for collapsing and restoring power to the peripheral. -- bus-range: Range of bus numbers associated with this controller. -- ranges: Ranges for the PCI memory and I/O regions. - -Required properties for MT7623/MT2701: -- #interrupt-cells: Size representation for interrupts (must be 1) -- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties - Please refer to the standard PCI bus binding document for a more detailed - explanation. -- resets: Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names: Must be "pcie-rst0", "pcie-rst1", "pcie-rstN".. based on the - number of root ports. - -Required properties for MT2712/MT7622/MT7629: --interrupts: A list of interrupt outputs of the controller, must have one - entry for each PCIe port -- interrupt-names: Must include the following entries: - - "pcie_irq": The interrupt that is asserted when an MSI/INTX is received -- linux,pci-domain: PCI domain ID. Should be unique for each host controller - -In addition, the device tree node must have sub-nodes describing each -PCIe port interface, having the following mandatory properties: - -Required properties: -- device_type: Must be "pci" -- reg: Only the first four bytes are used to refer to the correct bus number - and device number. -- #address-cells: Must be 3 -- #size-cells: Must be 2 -- #interrupt-cells: Must be 1 -- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties - Please refer to the standard PCI bus binding document for a more detailed - explanation. -- ranges: Sub-ranges distributed from the PCIe controller node. An empty - property is sufficient. - -Examples for MT7623: - - hifsys: syscon@1a000000 { - compatible = "mediatek,mt7623-hifsys", - "mediatek,mt2701-hifsys", - "syscon"; - reg = <0 0x1a000000 0 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - pcie: pcie@1a140000 { - compatible = "mediatek,mt7623-pcie"; - device_type = "pci"; - reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */ - <0 0x1a142000 0 0x1000>, /* Port0 registers */ - <0 0x1a143000 0 0x1000>, /* Port1 registers */ - <0 0x1a144000 0 0x1000>; /* Port2 registers */ - reg-names = "subsys", "port0", "port1", "port2"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - interrupt-map-mask = <0xf800 0 0 0>; - interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>, - <0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>, - <0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; - clocks = <&topckgen CLK_TOP_ETHIF_SEL>, - <&hifsys CLK_HIFSYS_PCIE0>, - <&hifsys CLK_HIFSYS_PCIE1>, - <&hifsys CLK_HIFSYS_PCIE2>; - clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2"; - resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>, - <&hifsys MT2701_HIFSYS_PCIE1_RST>, - <&hifsys MT2701_HIFSYS_PCIE2_RST>; - reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2"; - phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>, - <&pcie2_phy PHY_TYPE_PCIE>; - phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>; - bus-range = <0x00 0xff>; - ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000 /* I/O space */ - 0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>; /* memory space */ - - pcie@0,0 { - reg = <0x0000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>; - ranges; - }; - - pcie@1,0 { - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>; - ranges; - }; - - pcie@2,0 { - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; - ranges; - }; - }; - -Examples for MT2712: - - pcie1: pcie@112ff000 { - compatible = "mediatek,mt2712-pcie"; - device_type = "pci"; - reg = <0 0x112ff000 0 0x1000>; - reg-names = "port1"; - linux,pci-domain = <1>; - #address-cells = <3>; - #size-cells = <2>; - interrupts = ; - interrupt-names = "pcie_irq"; - clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, - <&pericfg CLK_PERI_PCIE1>; - clock-names = "sys_ck1", "ahb_ck1"; - phys = <&u3port1 PHY_TYPE_PCIE>; - phy-names = "pcie-phy1"; - bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x11400000 0x0 0x11400000 0 0x300000>; - status = "disabled"; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc1 0>, - <0 0 0 2 &pcie_intc1 1>, - <0 0 0 3 &pcie_intc1 2>, - <0 0 0 4 &pcie_intc1 3>; - pcie_intc1: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; - }; - - pcie0: pcie@11700000 { - compatible = "mediatek,mt2712-pcie"; - device_type = "pci"; - reg = <0 0x11700000 0 0x1000>; - reg-names = "port0"; - linux,pci-domain = <0>; - #address-cells = <3>; - #size-cells = <2>; - interrupts = ; - interrupt-names = "pcie_irq"; - clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, - <&pericfg CLK_PERI_PCIE0>; - clock-names = "sys_ck0", "ahb_ck0"; - phys = <&u3port0 PHY_TYPE_PCIE>; - phy-names = "pcie-phy0"; - bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; - status = "disabled"; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc0 0>, - <0 0 0 2 &pcie_intc0 1>, - <0 0 0 3 &pcie_intc0 2>, - <0 0 0 4 &pcie_intc0 3>; - pcie_intc0: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; - }; - -Examples for MT7622: - - pcie0: pcie@1a143000 { - compatible = "mediatek,mt7622-pcie"; - device_type = "pci"; - reg = <0 0x1a143000 0 0x1000>; - reg-names = "port0"; - linux,pci-domain = <0>; - #address-cells = <3>; - #size-cells = <2>; - interrupts = ; - interrupt-names = "pcie_irq"; - clocks = <&pciesys CLK_PCIE_P0_MAC_EN>, - <&pciesys CLK_PCIE_P0_AHB_EN>, - <&pciesys CLK_PCIE_P0_AUX_EN>, - <&pciesys CLK_PCIE_P0_AXI_EN>, - <&pciesys CLK_PCIE_P0_OBFF_EN>, - <&pciesys CLK_PCIE_P0_PIPE_EN>; - clock-names = "sys_ck0", "ahb_ck0", "aux_ck0", - "axi_ck0", "obff_ck0", "pipe_ck0"; - - power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; - bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>; - status = "disabled"; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc0 0>, - <0 0 0 2 &pcie_intc0 1>, - <0 0 0 3 &pcie_intc0 2>, - <0 0 0 4 &pcie_intc0 3>; - pcie_intc0: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; - }; - - pcie1: pcie@1a145000 { - compatible = "mediatek,mt7622-pcie"; - device_type = "pci"; - reg = <0 0x1a145000 0 0x1000>; - reg-names = "port1"; - linux,pci-domain = <1>; - #address-cells = <3>; - #size-cells = <2>; - interrupts = ; - interrupt-names = "pcie_irq"; - clocks = <&pciesys CLK_PCIE_P1_MAC_EN>, - /* designer has connect RC1 with p0_ahb clock */ - <&pciesys CLK_PCIE_P0_AHB_EN>, - <&pciesys CLK_PCIE_P1_AUX_EN>, - <&pciesys CLK_PCIE_P1_AXI_EN>, - <&pciesys CLK_PCIE_P1_OBFF_EN>, - <&pciesys CLK_PCIE_P1_PIPE_EN>; - clock-names = "sys_ck1", "ahb_ck1", "aux_ck1", - "axi_ck1", "obff_ck1", "pipe_ck1"; - - power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; - bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>; - status = "disabled"; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc1 0>, - <0 0 0 2 &pcie_intc1 1>, - <0 0 0 3 &pcie_intc1 2>, - <0 0 0 4 &pcie_intc1 3>; - pcie_intc1: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; - }; diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie.yaml new file mode 100644 index 00000000000000..0b8c78ec4f91b2 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.yaml @@ -0,0 +1,438 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/mediatek-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PCIe controller on MediaTek SoCs + +maintainers: + - Christian Marangi + +properties: + compatible: + oneOf: + - enum: + - airoha,an7583-pcie + - mediatek,mt2712-pcie + - mediatek,mt7622-pcie + - mediatek,mt7629-pcie + - items: + - const: airoha,en7523-pcie + - const: mediatek,mt7622-pcie + + reg: + maxItems: 1 + + reg-names: + enum: [ port0, port1 ] + + clocks: + minItems: 1 + maxItems: 6 + + clock-names: + minItems: 1 + items: + - enum: [ sys_ck0, sys_ck1 ] + - enum: [ ahb_ck0, ahb_ck1 ] + - enum: [ aux_ck0, aux_ck1 ] + - enum: [ axi_ck0, axi_ck1 ] + - enum: [ obff_ck0, obff_ck1 ] + - enum: [ pipe_ck0, pipe_ck1 ] + + resets: + maxItems: 1 + + reset-names: + const: pcie-rst1 + + interrupts: + maxItems: 1 + + interrupt-names: + const: pcie_irq + + phys: + maxItems: 1 + + phy-names: + enum: [ pcie-phy0, pcie-phy1 ] + + power-domains: + maxItems: 1 + + mediatek,pbus-csr: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to pbus-csr syscon + - description: offset of pbus-csr base address register + - description: offset of pbus-csr base address mask register + description: + Phandle with two arguments to the syscon node used to detect if + a given address is accessible on PCIe controller. + + '#interrupt-cells': + const: 1 + + interrupt-controller: + description: Interrupt controller node for handling legacy PCI interrupts. + type: object + properties: + '#address-cells': + const: 0 + '#interrupt-cells': + const: 1 + interrupt-controller: true + + required: + - '#address-cells' + - '#interrupt-cells' + - interrupt-controller + + additionalProperties: false + +required: + - compatible + - reg + - reg-names + - ranges + - clocks + - clock-names + - '#interrupt-cells' + - interrupts + - interrupt-names + - interrupt-controller + +allOf: + - $ref: /schemas/pci/pci-host-bridge.yaml# + + - if: + properties: + compatible: + const: airoha,an7583-pcie + then: + properties: + reg-names: + const: port1 + + clocks: + maxItems: 1 + + clock-names: + const: sys_ck1 + + phy-names: + const: pcie-phy1 + + power-domain: false + + required: + - resets + - reset-names + - phys + - phy-names + - mediatek,pbus-csr + + - if: + properties: + compatible: + const: mediatek,mt2712-pcie + then: + properties: + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + minItems: 2 + maxItems: 2 + + reset: false + + reset-names: false + + power-domains: false + + mediatek,pbus-csr: false + + required: + - phys + - phy-names + + - if: + properties: + compatible: + const: mediatek,mt7622-pcie + then: + properties: + clocks: + minItems: 6 + + reset: false + + reset-names: false + + phys: false + + phy-names: false + + mediatek,pbus-csr: false + + required: + - power-domains + + - if: + properties: + compatible: + const: mediatek,mt7629-pcie + then: + properties: + clocks: + minItems: 6 + + reset: false + + reset-names: false + + mediatek,pbus-csr: false + + required: + - power-domains + + - if: + properties: + compatible: + contains: + const: airoha,en7523-pcie + then: + properties: + clocks: + maxItems: 1 + + clock-names: + maxItems: 1 + + reset: false + + reset-names: false + + phys: false + + phy-names: false + + power-domain: false + + mediatek,pbus-csr: false + +unevaluatedProperties: false + +examples: + # MT2712 + - | + #include + #include + #include + + soc_1 { + #address-cells = <2>; + #size-cells = <2>; + + pcie@112ff000 { + compatible = "mediatek,mt2712-pcie"; + device_type = "pci"; + reg = <0 0x112ff000 0 0x1000>; + reg-names = "port1"; + linux,pci-domain = <1>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = ; + interrupt-names = "pcie_irq"; + clocks = <&topckgen>, /* CLK_TOP_PE2_MAC_P1_SEL */ + <&pericfg>; /* CLK_PERI_PCIE1 */ + clock-names = "sys_ck1", "ahb_ck1"; + phys = <&u3port1 PHY_TYPE_PCIE>; + phy-names = "pcie-phy1"; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x11400000 0x0 0x11400000 0 0x300000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + + pcie@11700000 { + compatible = "mediatek,mt2712-pcie"; + device_type = "pci"; + reg = <0 0x11700000 0 0x1000>; + reg-names = "port0"; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = ; + interrupt-names = "pcie_irq"; + clocks = <&topckgen>, /* CLK_TOP_PE2_MAC_P0_SEL */ + <&pericfg>; /* CLK_PERI_PCIE0 */ + clock-names = "sys_ck0", "ahb_ck0"; + phys = <&u3port0 PHY_TYPE_PCIE>; + phy-names = "pcie-phy0"; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + }; + + # MT7622 + - | + #include + #include + #include + + soc_2 { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1a143000 { + compatible = "mediatek,mt7622-pcie"; + device_type = "pci"; + reg = <0 0x1a143000 0 0x1000>; + reg-names = "port0"; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = ; + interrupt-names = "pcie_irq"; + clocks = <&pciesys>, /* CLK_PCIE_P0_MAC_EN */ + <&pciesys>, /* CLK_PCIE_P0_AHB_EN */ + <&pciesys>, /* CLK_PCIE_P0_AUX_EN */ + <&pciesys>, /* CLK_PCIE_P0_AXI_EN */ + <&pciesys>, /* CLK_PCIE_P0_OBFF_EN */ + <&pciesys>; /* CLK_PCIE_P0_PIPE_EN */ + clock-names = "sys_ck0", "ahb_ck0", "aux_ck0", + "axi_ck0", "obff_ck0", "pipe_ck0"; + + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc0_1 0>, + <0 0 0 2 &pcie_intc0_1 1>, + <0 0 0 3 &pcie_intc0_1 2>, + <0 0 0 4 &pcie_intc0_1 3>; + pcie_intc0_1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + + pcie@1a145000 { + compatible = "mediatek,mt7622-pcie"; + device_type = "pci"; + reg = <0 0x1a145000 0 0x1000>; + reg-names = "port1"; + linux,pci-domain = <1>; + #address-cells = <3>; + #size-cells = <2>; + interrupts = ; + interrupt-names = "pcie_irq"; + clocks = <&pciesys>, /* CLK_PCIE_P1_MAC_EN */ + /* designer has connect RC1 with p0_ahb clock */ + <&pciesys>, /* CLK_PCIE_P0_AHB_EN */ + <&pciesys>, /* CLK_PCIE_P1_AUX_EN */ + <&pciesys>, /* CLK_PCIE_P1_AXI_EN */ + <&pciesys>, /* CLK_PCIE_P1_OBFF_EN */ + <&pciesys>; /* CLK_PCIE_P1_PIPE_EN */ + clock-names = "sys_ck1", "ahb_ck1", "aux_ck1", + "axi_ck1", "obff_ck1", "pipe_ck1"; + + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1_1 0>, + <0 0 0 2 &pcie_intc1_1 1>, + <0 0 0 3 &pcie_intc1_1 2>, + <0 0 0 4 &pcie_intc1_1 3>; + pcie_intc1_1: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + }; + + # AN7583 + - | + #include + #include + #include + + soc_3 { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1fa92000 { + compatible = "airoha,an7583-pcie"; + device_type = "pci"; + linux,pci-domain = <1>; + #address-cells = <3>; + #size-cells = <2>; + + reg = <0x0 0x1fa92000 0x0 0x1670>; + reg-names = "port1"; + + clocks = <&scuclk EN7523_CLK_PCIE>; + clock-names = "sys_ck1"; + + phys = <&pciephy>; + phy-names = "pcie-phy1"; + + ranges = <0x02000000 0 0x24000000 0x0 0x24000000 0 0x4000000>; + + resets = <&scuclk>; /* AN7583_PCIE1_RST */ + reset-names = "pcie-rst1"; + + mediatek,pbus-csr = <&pbus_csr 0x8 0xc>; + + interrupts = ; + interrupt-names = "pcie_irq"; + bus-range = <0x00 0xff>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + + pcie_intc1_4: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/nxp,s32g-pcie.yaml b/Documentation/devicetree/bindings/pci/nxp,s32g-pcie.yaml new file mode 100644 index 00000000000000..66a050028278a3 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/nxp,s32g-pcie.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/nxp,s32g-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP S32G2xxx/S32G3xxx PCIe Root Complex controller + +maintainers: + - Bogdan Hamciuc + - Ionut Vicovan + +description: + This PCIe controller is based on the Synopsys DesignWare PCIe IP. + The S32G SoC family has two PCIe controllers, which can be configured as + either Root Complex or Endpoint. + +properties: + compatible: + oneOf: + - enum: + - nxp,s32g2-pcie + - items: + - const: nxp,s32g3-pcie + - const: nxp,s32g2-pcie + + reg: + maxItems: 6 + + reg-names: + items: + - const: dbi + - const: dbi2 + - const: atu + - const: dma + - const: ctrl + - const: config + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + items: + - const: msi + - const: dma + minItems: 1 + + pcie@0: + description: + Describe the S32G Root Port. + type: object + $ref: /schemas/pci/pci-pci-bridge.yaml# + + properties: + reg: + maxItems: 1 + + phys: + maxItems: 1 + + required: + - reg + - phys + + unevaluatedProperties: false + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - ranges + - pcie@0 + +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# + +unevaluatedProperties: false + +examples: + - | + #include + #include + + bus { + #address-cells = <2>; + #size-cells = <2>; + + pcie@40400000 { + compatible = "nxp,s32g3-pcie", "nxp,s32g2-pcie"; + reg = <0x00 0x40400000 0x0 0x00001000>, /* dbi registers */ + <0x00 0x40420000 0x0 0x00001000>, /* dbi2 registers */ + <0x00 0x40460000 0x0 0x00001000>, /* atu registers */ + <0x00 0x40470000 0x0 0x00001000>, /* dma registers */ + <0x00 0x40481000 0x0 0x000000f8>, /* ctrl registers */ + <0x5f 0xffffe000 0x0 0x00002000>; /* config space */ + reg-names = "dbi", "dbi2", "atu", "dma", "ctrl", "config"; + dma-coherent; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = + <0x01000000 0x0 0x00000000 0x5f 0xfffe0000 0x0 0x00010000>, + <0x02000000 0x0 0x00000000 0x58 0x00000000 0x0 0x80000000>, + <0x02000000 0x1 0x00000000 0x59 0x00000000 0x6 0xfffe0000>; + + bus-range = <0x0 0xff>; + interrupts = , + ; + interrupt-names = "msi", "dma"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic 0 0 GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic 0 0 GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic 0 0 GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + device_type = "pci"; + phys = <&serdes0 PHY_TYPE_PCIE 0 0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/pci-ep.yaml b/Documentation/devicetree/bindings/pci/pci-ep.yaml index 1868a10d5b10db..baeb583e0bcd70 100644 --- a/Documentation/devicetree/bindings/pci/pci-ep.yaml +++ b/Documentation/devicetree/bindings/pci/pci-ep.yaml @@ -11,7 +11,7 @@ description: | maintainers: - Kishon Vijay Abraham I - - Manivannan Sadhasivam + - Manivannan Sadhasivam properties: $nodename: diff --git a/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml index 039eecdbd6aad2..fe2e8beb5babdc 100644 --- a/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml +++ b/Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml @@ -72,7 +72,7 @@ required: - reg-names - interrupts - msi-controller - - "#interrupt-cells" + - '#interrupt-cells' - interrupt-map-mask - interrupt-map diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml index ab2509ec1c4b40..77f8faf54737e0 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml @@ -8,7 +8,7 @@ title: Qualcomm PCI Express Root Complex Common Properties maintainers: - Bjorn Andersson - - Manivannan Sadhasivam + - Manivannan Sadhasivam properties: reg: diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml index ac3414203d383b..bed9a40b186bcf 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm PCIe Endpoint Controller maintainers: - - Manivannan Sadhasivam + - Manivannan Sadhasivam properties: compatible: diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sa8255p.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8255p.yaml index bdddd4f499d186..1f2d098b863840 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sa8255p.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8255p.yaml @@ -8,7 +8,7 @@ title: Qualcomm SA8255p based firmware managed and ECAM compliant PCIe Root Comp maintainers: - Bjorn Andersson - - Manivannan Sadhasivam + - Manivannan Sadhasivam description: Qualcomm SA8255p SoC PCIe root complex controller is based on the Synopsys diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml index 19afe2a03409b8..63630a814f287f 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml @@ -8,7 +8,7 @@ title: Qualcomm SA8775p PCI Express Root Complex maintainers: - Bjorn Andersson - - Manivannan Sadhasivam + - Manivannan Sadhasivam description: Qualcomm SA8775p SoC PCIe root complex controller is based on the Synopsys @@ -78,6 +78,9 @@ properties: required: - interconnects - interconnect-names + - power-domains + - resets + - reset-names allOf: - $ref: qcom,pcie-common.yaml# diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml index 4d0a915566030f..1f942b3075f1c7 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml @@ -8,7 +8,7 @@ title: Qualcomm SC7280 PCI Express Root Complex maintainers: - Bjorn Andersson - - Manivannan Sadhasivam + - Manivannan Sadhasivam description: Qualcomm SC7280 SoC PCIe root complex controller is based on the Synopsys @@ -76,6 +76,11 @@ properties: items: - const: pci +required: + - power-domains + - resets + - reset-names + allOf: - $ref: qcom,pcie-common.yaml# diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml index 34a4d7b2c8459a..6a7c410c9fc30f 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml @@ -8,7 +8,7 @@ title: Qualcomm SC8180x PCI Express Root Complex maintainers: - Bjorn Andersson - - Manivannan Sadhasivam + - Manivannan Sadhasivam description: Qualcomm SC8180x SoC PCIe root complex controller is based on the Synopsys diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml index 15ba2385eb73c4..bc0e71dc06a3a3 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sc8280xp.yaml @@ -8,7 +8,7 @@ title: Qualcomm SC8280XP PCI Express Root Complex maintainers: - Bjorn Andersson - - Manivannan Sadhasivam + - Manivannan Sadhasivam description: Qualcomm SC8280XP SoC PCIe root complex controller is based on the Synopsys @@ -61,6 +61,9 @@ properties: required: - interconnects - interconnect-names + - power-domains + - resets + - reset-names allOf: - $ref: qcom,pcie-common.yaml# diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml index 26b247a41785fa..6a5421e4f19d41 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml @@ -8,7 +8,7 @@ title: Qualcomm SM8150 PCI Express Root Complex maintainers: - Bjorn Andersson - - Manivannan Sadhasivam + - Manivannan Sadhasivam description: Qualcomm SM8150 SoC PCIe root complex controller is based on the Synopsys @@ -74,6 +74,11 @@ properties: items: - const: pci +required: + - power-domains + - resets + - reset-names + allOf: - $ref: qcom,pcie-common.yaml# diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml index af4dae68d50873..adbeaa8f2c1333 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml @@ -8,7 +8,7 @@ title: Qualcomm SM8250 PCI Express Root Complex maintainers: - Bjorn Andersson - - Manivannan Sadhasivam + - Manivannan Sadhasivam description: Qualcomm SM8250 SoC PCIe root complex controller is based on the Synopsys @@ -83,6 +83,11 @@ properties: items: - const: pci +required: + - power-domains + - resets + - reset-names + allOf: - $ref: qcom,pcie-common.yaml# diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml index dde3079adbb331..5744d5e969fb94 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml @@ -8,7 +8,7 @@ title: Qualcomm SM8350 PCI Express Root Complex maintainers: - Bjorn Andersson - - Manivannan Sadhasivam + - Manivannan Sadhasivam description: Qualcomm SM8350 SoC PCIe root complex controller is based on the Synopsys @@ -73,6 +73,11 @@ properties: items: - const: pci +required: + - power-domains + - resets + - reset-names + allOf: - $ref: qcom,pcie-common.yaml# diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml index 6e0a6d8f0ed070..28b8ffb74124b1 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml @@ -8,7 +8,7 @@ title: Qualcomm SM8450 PCI Express Root Complex maintainers: - Bjorn Andersson - - Manivannan Sadhasivam + - Manivannan Sadhasivam description: Qualcomm SM8450 SoC PCIe root complex controller is based on the Synopsys @@ -77,6 +77,11 @@ properties: items: - const: pci +required: + - power-domains + - resets + - reset-names + allOf: - $ref: qcom,pcie-common.yaml# diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml index 38b561e23c1fda..3a94a9c1bb1559 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8550.yaml @@ -8,7 +8,7 @@ title: Qualcomm SM8550 PCI Express Root Complex maintainers: - Bjorn Andersson - - Manivannan Sadhasivam + - Manivannan Sadhasivam description: Qualcomm SM8550 SoC (and compatible) PCIe root complex controller is based on @@ -20,6 +20,7 @@ properties: - const: qcom,pcie-sm8550 - items: - enum: + - qcom,kaanapali-pcie - qcom,sar2130p-pcie - qcom,pcie-sm8650 - qcom,pcie-sm8750 @@ -83,6 +84,11 @@ properties: - const: pci # PCIe core reset - const: link_down # PCIe link down reset +required: + - power-domains + - resets + - reset-names + allOf: - $ref: qcom,pcie-common.yaml# diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml index 61581ffbfb2481..62c674ca0cf745 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml @@ -8,7 +8,7 @@ title: Qualcomm X1E80100 PCI Express Root Complex maintainers: - Bjorn Andersson - - Manivannan Sadhasivam + - Manivannan Sadhasivam description: Qualcomm X1E80100 SoC (and compatible) PCIe root complex controller is based on @@ -73,6 +73,11 @@ properties: - const: pci # PCIe core reset - const: link_down # PCIe link down reset +required: + - power-domains + - resets + - reset-names + allOf: - $ref: qcom,pcie-common.yaml# diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml index 0e1808105a8196..c61930441be09d 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml @@ -8,7 +8,7 @@ title: Qualcomm PCI express root complex maintainers: - Bjorn Andersson - - Manivannan Sadhasivam + - Manivannan Sadhasivam description: | Qualcomm PCIe root complex controller is based on the Synopsys DesignWare diff --git a/Documentation/devicetree/bindings/pci/renesas,r9a08g045-pcie.yaml b/Documentation/devicetree/bindings/pci/renesas,r9a08g045-pcie.yaml new file mode 100644 index 00000000000000..d668782546a235 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/renesas,r9a08g045-pcie.yaml @@ -0,0 +1,249 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/renesas,r9a08g045-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G3S PCIe host controller + +maintainers: + - Claudiu Beznea + +description: + Renesas RZ/G3S PCIe host controller complies with PCIe Base Specification + 4.0 and supports up to 5 GT/s (Gen2). + +properties: + compatible: + const: renesas,r9a08g045-pcie # RZ/G3S + + reg: + maxItems: 1 + + interrupts: + items: + - description: System error interrupt + - description: System error on correctable error interrupt + - description: System error on non-fatal error interrupt + - description: System error on fatal error interrupt + - description: AXI error interrupt + - description: INTA interrupt + - description: INTB interrupt + - description: INTC interrupt + - description: INTD interrupt + - description: MSI interrupt + - description: Link bandwidth interrupt + - description: PME interrupt + - description: DMA interrupt + - description: PCIe event interrupt + - description: Message interrupt + - description: All interrupts + + interrupt-names: + items: + - description: serr + - description: ser_cor + - description: serr_nonfatal + - description: serr_fatal + - description: axi_err + - description: inta + - description: intb + - description: intc + - description: intd + - description: msi + - description: link_bandwidth + - description: pm_pme + - description: dma + - description: pcie_evt + - description: msg + - description: all + + interrupt-controller: true + + clocks: + items: + - description: System clock + - description: PM control clock + + clock-names: + items: + - description: aclk + - description: pm + + resets: + items: + - description: AXI2PCIe Bridge reset + - description: Data link layer/transaction layer reset + - description: Transaction layer (ACLK domain) reset + - description: Transaction layer (PCLK domain) reset + - description: Physical layer reset + - description: Configuration register reset + - description: Configuration register reset + + reset-names: + items: + - description: aresetn + - description: rst_b + - description: rst_gp_b + - description: rst_ps_b + - description: rst_rsm_b + - description: rst_cfg_b + - description: rst_load_b + + power-domains: + maxItems: 1 + + dma-ranges: + description: + A single range for the inbound memory region. + maxItems: 1 + + renesas,sysc: + description: | + System controller registers control and monitor various PCIe + functionalities. + + Control: + - transition to L1 state + - receiver termination settings + - RST_RSM_B signal + + Monitor: + - clkl1pm clock request state + - power off information in L2 state + - errors (fatal, non-fatal, correctable) + $ref: /schemas/types.yaml#/definitions/phandle + +patternProperties: + "^pcie@0,[0-0]$": + type: object + allOf: + - $ref: /schemas/pci/pci-pci-bridge.yaml# + + properties: + reg: + maxItems: 1 + + vendor-id: + const: 0x1912 + + device-id: + const: 0x0033 + + clocks: + items: + - description: Reference clock + + clock-names: + items: + - const: ref + + required: + - device_type + - vendor-id + - device-id + - clocks + - clock-names + + unevaluatedProperties: false + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - interrupts + - interrupt-names + - interrupt-map + - interrupt-map-mask + - interrupt-controller + - power-domains + - "#address-cells" + - "#size-cells" + - "#interrupt-cells" + - renesas,sysc + +allOf: + - $ref: /schemas/pci/pci-host-bridge.yaml# + +unevaluatedProperties: false + +examples: + - | + #include + #include + + bus { + #address-cells = <2>; + #size-cells = <2>; + + pcie@11e40000 { + compatible = "renesas,r9a08g045-pcie"; + reg = <0 0x11e40000 0 0x10000>; + ranges = <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>; + /* Map all possible DRAM ranges (4 GB). */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 1 0x00000000>; + bus-range = <0x0 0xff>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "serr", "serr_cor", "serr_nonfatal", + "serr_fatal", "axi_err", "inta", + "intb", "intc", "intd", "msi", + "link_bandwidth", "pm_pme", "dma", + "pcie_evt", "msg", "all"; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie 0 0 0 0>, /* INTA */ + <0 0 0 2 &pcie 0 0 0 1>, /* INTB */ + <0 0 0 3 &pcie 0 0 0 2>, /* INTC */ + <0 0 0 4 &pcie 0 0 0 3>; /* INTD */ + clocks = <&cpg CPG_MOD R9A08G045_PCI_ACLK>, + <&cpg CPG_MOD R9A08G045_PCI_CLKL1PM>; + clock-names = "aclk", "pm"; + resets = <&cpg R9A08G045_PCI_ARESETN>, + <&cpg R9A08G045_PCI_RST_B>, + <&cpg R9A08G045_PCI_RST_GP_B>, + <&cpg R9A08G045_PCI_RST_PS_B>, + <&cpg R9A08G045_PCI_RST_RSM_B>, + <&cpg R9A08G045_PCI_RST_CFG_B>, + <&cpg R9A08G045_PCI_RST_LOAD_B>; + reset-names = "aresetn", "rst_b", "rst_gp_b", "rst_ps_b", + "rst_rsm_b", "rst_cfg_b", "rst_load_b"; + power-domains = <&cpg>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + renesas,sysc = <&sysc>; + + pcie@0,0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + ranges; + clocks = <&versa3 5>; + clock-names = "ref"; + device_type = "pci"; + vendor-id = <0x1912>; + device-id = <0x0033>; + #address-cells = <3>; + #size-cells = <2>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml index 6c6d828ce96413..355c4a46bd3160 100644 --- a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml @@ -22,6 +22,7 @@ properties: - const: rockchip,rk3568-pcie - items: - enum: + - rockchip,rk3528-pcie - rockchip,rk3562-pcie - rockchip,rk3576-pcie - rockchip,rk3588-pcie @@ -78,6 +79,7 @@ allOf: compatible: contains: enum: + - rockchip,rk3528-pcie - rockchip,rk3562-pcie - rockchip,rk3576-pcie then: @@ -89,6 +91,7 @@ allOf: compatible: contains: enum: + - rockchip,rk3528-pcie - rockchip,rk3562-pcie - rockchip,rk3576-pcie then: @@ -121,7 +124,6 @@ allOf: - const: dma2 - const: dma3 - unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml index 34594972d8dbeb..6339a76499b21a 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml @@ -115,11 +115,11 @@ properties: above for new bindings. oneOf: - description: See native 'dbi' clock for details - enum: [ pcie, pcie_apb_sys, aclk_dbi, reg ] + enum: [ pcie, pcie_apb_sys, aclk_dbi, reg, port ] - description: See native 'mstr/slv' clock for details enum: [ pcie_bus, pcie_inbound_axi, pcie_aclk, aclk_mst, aclk_slv ] - description: See native 'pipe' clock for details - enum: [ pcie_phy, pcie_phy_ref, link ] + enum: [ pcie_phy, pcie_phy_ref, link, general ] - description: See native 'aux' clock for details enum: [ pcie_aux ] - description: See native 'ref' clock for details. @@ -176,7 +176,7 @@ properties: - description: See native 'phy' reset for details enum: [ pciephy, link ] - description: See native 'pwr' reset for details - enum: [ turnoff ] + enum: [ turnoff, port ] phys: description: diff --git a/Documentation/devicetree/bindings/pci/spacemit,k1-pcie-host.yaml b/Documentation/devicetree/bindings/pci/spacemit,k1-pcie-host.yaml new file mode 100644 index 00000000000000..c4c00b5fcdc0c4 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/spacemit,k1-pcie-host.yaml @@ -0,0 +1,157 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/spacemit,k1-pcie-host.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SpacemiT K1 PCI Express Host Controller + +maintainers: + - Alex Elder + +description: > + The SpacemiT K1 SoC PCIe host controller is based on the Synopsys DesignWare + PCIe IP. The controller uses the DesignWare built-in MSI interrupt + controller, and supports 256 MSIs. + +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# + +properties: + compatible: + const: spacemit,k1-pcie + + reg: + items: + - description: DesignWare PCIe registers + - description: ATU address space + - description: PCIe configuration space + - description: Link control registers + + reg-names: + items: + - const: dbi + - const: atu + - const: config + - const: link + + clocks: + items: + - description: DWC PCIe Data Bus Interface (DBI) clock + - description: DWC PCIe application AXI-bus master interface clock + - description: DWC PCIe application AXI-bus slave interface clock + + clock-names: + items: + - const: dbi + - const: mstr + - const: slv + + resets: + items: + - description: DWC PCIe Data Bus Interface (DBI) reset + - description: DWC PCIe application AXI-bus master interface reset + - description: DWC PCIe application AXI-bus slave interface reset + + reset-names: + items: + - const: dbi + - const: mstr + - const: slv + + interrupts: + items: + - description: Interrupt used for MSIs + + interrupt-names: + const: msi + + spacemit,apmu: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + A phandle that refers to the APMU system controller, whose regmap is + used in managing resets and link state, along with and offset of its + reset control register. + items: + - items: + - description: phandle to APMU system controller + - description: register offset + +patternProperties: + '^pcie@': + type: object + $ref: /schemas/pci/pci-pci-bridge.yaml# + + properties: + phys: + maxItems: 1 + + vpcie3v3-supply: + description: + A phandle for 3.3v regulator to use for PCIe + + required: + - phys + - vpcie3v3-supply + + unevaluatedProperties: false + +required: + - clocks + - clock-names + - resets + - reset-names + - interrupts + - interrupt-names + - spacemit,apmu + +unevaluatedProperties: false + +examples: + - | + #include + pcie@ca400000 { + device_type = "pci"; + compatible = "spacemit,k1-pcie"; + reg = <0xca400000 0x00001000>, + <0xca700000 0x0001ff24>, + <0x9f000000 0x00002000>, + <0xc0c20000 0x00001000>; + reg-names = "dbi", + "atu", + "config", + "link"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x9f002000 0x0 0x00100000>, + <0x02000000 0x0 0x90000000 0x90000000 0x0 0x0f000000>; + interrupts = <142>; + interrupt-names = "msi"; + clocks = <&syscon_apmu CLK_PCIE1_DBI>, + <&syscon_apmu CLK_PCIE1_MASTER>, + <&syscon_apmu CLK_PCIE1_SLAVE>; + clock-names = "dbi", + "mstr", + "slv"; + resets = <&syscon_apmu RESET_PCIE1_DBI>, + <&syscon_apmu RESET_PCIE1_MASTER>, + <&syscon_apmu RESET_PCIE1_SLAVE>; + reset-names = "dbi", + "mstr", + "slv"; + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_3_cfg>; + spacemit,apmu = <&syscon_apmu 0x3d4>; + + pcie@0 { + device_type = "pci"; + compatible = "pciclass,0604"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + phys = <&pcie1_phy>; + vpcie3v3-supply = <&pcie_vcc_3v3>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml index 5f432452c815bc..33c80626e8ec97 100644 --- a/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml @@ -16,7 +16,6 @@ properties: compatible: const: starfive,jh7110-pcie - reg: maxItems: 2 diff --git a/Documentation/devicetree/bindings/pci/toshiba,tc9563.yaml b/Documentation/devicetree/bindings/pci/toshiba,tc9563.yaml new file mode 100644 index 00000000000000..fae46606478095 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/toshiba,tc9563.yaml @@ -0,0 +1,179 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/toshiba,tc9563.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba TC9563 PCIe switch + +maintainers: + - Krishna Chaitanya Chundru + +description: | + Toshiba TC9563 PCIe switch has one upstream and three downstream ports. + The 3rd downstream port has integrated endpoint device of Ethernet MAC. + Other two downstream ports are supposed to connect to external device. + + The TC9563 PCIe switch can be configured through I2C interface before + PCIe link is established to change FTS, ASPM related entry delays, + tx amplitude etc for better power efficiency and functionality. + +properties: + compatible: + enum: + - pci1179,0623 + + reg: + maxItems: 1 + + resx-gpios: + maxItems: 1 + description: + GPIO controlling the RESX# pin. + + vdd18-supply: true + + vdd09-supply: true + + vddc-supply: true + + vddio1-supply: true + + vddio2-supply: true + + vddio18-supply: true + + i2c-parent: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + A phandle to the parent I2C node and the slave address of the device + used to configure tc9563 to change FTS, tx amplitude etc. + items: + - description: Phandle to the I2C controller node + - description: I2C slave address + +patternProperties: + "^pcie@[1-3],0$": + description: + child nodes describing the internal downstream ports of + the tc9563 switch. + type: object + allOf: + - $ref: "#/$defs/tc9563-node" + - $ref: /schemas/pci/pci-pci-bridge.yaml# + unevaluatedProperties: false + +$defs: + tc9563-node: + type: object + + properties: + toshiba,tx-amplitude-microvolt: + description: + Change Tx Margin setting for low power consumption. + + toshiba,no-dfe-support: + type: boolean + description: + Disable DFE (Decision Feedback Equalizer), which mitigates + intersymbol interference and some reflections caused by + impedance mismatches. + +required: + - resx-gpios + - vdd18-supply + - vdd09-supply + - vddc-supply + - vddio1-supply + - vddio2-supply + - vddio18-supply + - i2c-parent + +allOf: + - $ref: "#/$defs/tc9563-node" + - $ref: /schemas/pci/pci-bus-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include + + pcie { + #address-cells = <3>; + #size-cells = <2>; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + bus-range = <0x01 0xff>; + + pcie@0,0 { + compatible = "pci1179,0623"; + + reg = <0x10000 0x0 0x0 0x0 0x0>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges; + bus-range = <0x02 0xff>; + + i2c-parent = <&qup_i2c 0x77>; + + vdd18-supply = <&vdd>; + vdd09-supply = <&vdd>; + vddc-supply = <&vdd>; + vddio1-supply = <&vdd>; + vddio2-supply = <&vdd>; + vddio18-supply = <&vdd>; + + resx-gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + + pcie@1,0 { + compatible = "pciclass,0604"; + reg = <0x20800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + bus-range = <0x03 0xff>; + + toshiba,no-dfe-support; + }; + + pcie@2,0 { + compatible = "pciclass,0604"; + reg = <0x21000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + bus-range = <0x04 0xff>; + }; + + pcie@3,0 { + compatible = "pciclass,0604"; + reg = <0x21800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges; + bus-range = <0x05 0xff>; + + toshiba,tx-amplitude-microvolt = <10>; + + ethernet@0,0 { + reg = <0x50000 0x0 0x0 0x0 0x0>; + }; + + ethernet@0,1 { + reg = <0x50100 0x0 0x0 0x0 0x0>; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/v3,v360epc-pci.yaml b/Documentation/devicetree/bindings/pci/v3,v360epc-pci.yaml index 38cac88f17bfd4..0e2ac2f8faed3a 100644 --- a/Documentation/devicetree/bindings/pci/v3,v360epc-pci.yaml +++ b/Documentation/devicetree/bindings/pci/v3,v360epc-pci.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: V3 Semiconductor V360 EPC PCI bridge maintainers: - - Linus Walleij + - Linus Walleij description: This bridge is found in the ARM Integrator/AP (Application Platform) diff --git a/Documentation/devicetree/bindings/pci/versatile.yaml b/Documentation/devicetree/bindings/pci/versatile.yaml index 294c7cd84b37f1..d30b8849db91cb 100644 --- a/Documentation/devicetree/bindings/pci/versatile.yaml +++ b/Documentation/devicetree/bindings/pci/versatile.yaml @@ -90,5 +90,4 @@ examples: <0x0000 0 0 4 &sic 28>; }; - ... diff --git a/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml index d2e578d6b83b88..103e4aec243942 100644 --- a/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml +++ b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml @@ -14,6 +14,7 @@ properties: oneOf: - enum: - fsl,imx8-ddr-pmu + - fsl,imx8dxl-db-pmu - fsl,imx8m-ddr-pmu - fsl,imx8mq-ddr-pmu - fsl,imx8mm-ddr-pmu @@ -28,7 +29,10 @@ properties: - fsl,imx8mp-ddr-pmu - const: fsl,imx8m-ddr-pmu - items: - - const: fsl,imx8dxl-ddr-pmu + - enum: + - fsl,imx8dxl-ddr-pmu + - fsl,imx8qm-ddr-pmu + - fsl,imx8qxp-ddr-pmu - const: fsl,imx8-ddr-pmu - items: - enum: @@ -43,6 +47,14 @@ properties: interrupts: maxItems: 1 + clocks: + maxItems: 2 + + clock-names: + items: + - const: ipg + - const: cnt + required: - compatible - reg @@ -50,6 +62,21 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx8dxl-db-pmu + then: + required: + - clocks + - clock-names + else: + properties: + clocks: false + clock-names: false + examples: - | #include diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml index f9cffbb2df07d6..8a00a6c58edd47 100644 --- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml @@ -27,11 +27,16 @@ properties: const: 0 clocks: - maxItems: 1 + minItems: 1 + items: + - description: PHY configuration clock + - description: Alternate PHY reference clock clock-names: + minItems: 1 items: - const: phy + - const: alt power-domains: maxItems: 1 diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml index b2218c15193917..ff5c77ef11765c 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml @@ -80,6 +80,7 @@ properties: - mediatek,mt2712-tphy - mediatek,mt6893-tphy - mediatek,mt7629-tphy + - mediatek,mt7981-tphy - mediatek,mt7986-tphy - mediatek,mt8183-tphy - mediatek,mt8186-tphy diff --git a/Documentation/devicetree/bindings/phy/mediatek,ufs-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,ufs-phy.yaml index 3e62b5d4da616e..6e2edd43fc2ac8 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,ufs-phy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,ufs-phy.yaml @@ -8,8 +8,9 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: MediaTek Universal Flash Storage (UFS) M-PHY maintainers: - - Stanley Chu - Chunfeng Yun + - Peter Wang + - Chaotian Jing description: | UFS M-PHY nodes are defined to describe on-chip UFS M-PHY hardware macro. diff --git a/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml b/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml index 0febd04a61f452..dd345cbd0a0b49 100644 --- a/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/motorola,cpcap-usb-phy.yaml @@ -67,8 +67,8 @@ properties: mode-gpios: description: Optional GPIOs for configuring alternate modes items: - - description: "mode selection GPIO #0" - - description: "mode selection GPIO #1" + - description: mode selection GPIO#0 + - description: mode selection GPIO#1 required: - compatible diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml index 119b4ff36dbd66..48bd11410e8c2d 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml @@ -16,6 +16,7 @@ description: properties: compatible: enum: + - qcom,glymur-qmp-gen5x4-pcie-phy - qcom,qcs615-qmp-gen3x1-pcie-phy - qcom,qcs8300-qmp-gen4x2-pcie-phy - qcom,sa8775p-qmp-gen4x2-pcie-phy @@ -178,6 +179,7 @@ allOf: compatible: contains: enum: + - qcom,glymur-qmp-gen5x4-pcie-phy - qcom,sa8775p-qmp-gen4x2-pcie-phy - qcom,sa8775p-qmp-gen4x4-pcie-phy - qcom,sc8280xp-qmp-gen3x1-pcie-phy @@ -213,17 +215,26 @@ allOf: compatible: contains: enum: + - qcom,glymur-qmp-gen5x4-pcie-phy - qcom,sm8550-qmp-gen4x2-pcie-phy - qcom,sm8650-qmp-gen4x2-pcie-phy + - qcom,x1e80100-qmp-gen3x2-pcie-phy - qcom,x1e80100-qmp-gen4x2-pcie-phy - qcom,x1e80100-qmp-gen4x4-pcie-phy - qcom,x1e80100-qmp-gen4x8-pcie-phy + - qcom,x1p42100-qmp-gen4x4-pcie-phy then: properties: resets: minItems: 2 reset-names: minItems: 2 + else: + properties: + resets: + maxItems: 1 + reset-names: + maxItems: 1 - if: properties: diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml index a1b55168e05069..863a1a446739e5 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml @@ -35,7 +35,6 @@ properties: - qcom,sm8350-qmp-usb3-uni-phy - qcom,x1e80100-qmp-usb3-uni-phy - reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml index c8bc512df08b56..e0ec45b96bf5d7 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml @@ -78,10 +78,77 @@ properties: ports: $ref: /schemas/graph.yaml#/properties/ports + properties: port@0: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base description: Output endpoint of the PHY + unevaluatedProperties: false + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + + endpoint@0: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + description: Display Port Output lanes of the PHY when used with static mapping, + The entry index is the DP lanes index, and the number is the PHY + signal in the order RX0, TX0, TX1, RX1. + unevaluatedProperties: false + + properties: + # Static lane mappings are mutually exclusive with typec-mux/orientation-mux + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + maxItems: 4 + oneOf: + - items: # DisplayPort 1 lane, normal orientation + - const: 3 + - items: # DisplayPort 1 lane, flipped orientation + - const: 0 + - items: # DisplayPort 2 lanes, normal orientation + - const: 3 + - const: 2 + - items: # DisplayPort 2 lanes, flipped orientation + - const: 0 + - const: 1 + - items: # DisplayPort 4 lanes, normal orientation + - const: 3 + - const: 2 + - const: 1 + - const: 0 + - items: # DisplayPort 4 lanes, flipped orientation + - const: 0 + - const: 1 + - const: 2 + - const: 3 + required: + - data-lanes + + endpoint@1: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + description: USB Output lanes of the PHY when used with static mapping. + The entry index is the USB3 lane in the order TX then RX, and the + number is the PHY signal in the order RX0, TX0, TX1, RX1. + unevaluatedProperties: false + + properties: + # Static lane mappings are mutually exclusive with typec-mux/orientation-mux + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 2 + oneOf: + - items: # USB3, normal orientation + - const: 1 + - const: 0 + - items: # USB3, flipped orientation + - const: 2 + - const: 3 + + required: + - data-lanes port@1: $ref: /schemas/graph.yaml#/properties/port diff --git a/Documentation/devicetree/bindings/phy/renesas,rzg3e-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,rzg3e-usb3-phy.yaml new file mode 100644 index 00000000000000..b86dc7a291a499 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/renesas,rzg3e-usb3-phy.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/renesas,rzg3e-usb3-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G3E USB 3.0 PHY + +maintainers: + - Biju Das + +properties: + compatible: + const: renesas,r9a09g047-usb3-phy + + reg: + maxItems: 1 + + clocks: + items: + - description: APB bus clock + - description: USB 2.0 PHY reference clock + - description: USB 3.0 PHY reference clock + + clock-names: + items: + - const: pclk + - const: core + - const: ref_alt_clk_p + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + '#phy-cells': + const: 0 + +required: + - compatible + - reg + - clocks + - clock-names + - power-domains + - resets + - '#phy-cells' + +additionalProperties: false + +examples: + - | + #include + + usb-phy@15870000 { + compatible = "renesas,r9a09g047-usb3-phy"; + reg = <0x15870000 0x10000>; + clocks = <&cpg CPG_MOD 0xb0>, <&cpg CPG_CORE 13>, <&cpg CPG_CORE 12>; + clock-names = "pclk", "core", "ref_alt_clk_p"; + power-domains = <&cpg>; + resets = <&cpg 0xaa>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml index 179cb4bfc424c4..2bbec8702a1e08 100644 --- a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml @@ -118,6 +118,7 @@ allOf: contains: enum: - renesas,usb2-phy-r9a09g057 + - renesas,usb2-phy-r9a08g045 - renesas,rzg2l-usb2-phy then: properties: diff --git a/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml b/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml index 46e64fa293d501..83e7c825860cb6 100644 --- a/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml +++ b/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml @@ -18,6 +18,7 @@ properties: - rockchip,px30-dsi-dphy - rockchip,rk3128-dsi-dphy - rockchip,rk3368-dsi-dphy + - rockchip,rk3506-dsi-dphy - rockchip,rk3568-dsi-dphy - rockchip,rv1126-dsi-dphy diff --git a/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml index 138923ffedfeeb..c686d06f5f5619 100644 --- a/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml +++ b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml @@ -23,16 +23,26 @@ properties: - enum: - ti,tcan1042 - ti,tcan1043 + - nxp,tja1048 + - nxp,tja1051 + - nxp,tja1057 - nxp,tjr1443 '#phy-cells': - const: 0 + enum: [0, 1] - standby-gpios: + silent-gpios: description: - gpio node to toggle standby signal on transceiver + gpio node to toggle silent signal on transceiver maxItems: 1 + standby-gpios: + description: + gpio node to toggle standby signal on transceiver. For two Items, item 1 + is for stbn1, item 2 is for stbn2. + minItems: 1 + maxItems: 2 + enable-gpios: description: gpio node to toggle enable signal on transceiver @@ -54,6 +64,59 @@ required: - compatible - '#phy-cells' +allOf: + - if: + properties: + compatible: + enum: + - nxp,tjr1443 + - ti,tcan1042 + - ti,tcan1043 + then: + properties: + '#phy-cells': + const: 0 + silent-gpios: false + standby-gpios: + maxItems: 1 + + - if: + properties: + compatible: + contains: + const: nxp,tja1048 + then: + properties: + '#phy-cells': + const: 1 + enable-gpios: false + silent-gpios: false + standby-gpios: + minItems: 2 + + - if: + properties: + compatible: + contains: + const: nxp,tja1051 + then: + properties: + '#phy-cells': + const: 0 + standby-gpios: false + + - if: + properties: + compatible: + contains: + const: nxp,tja1057 + then: + properties: + '#phy-cells': + const: 0 + enable-gpios: false + standby-gpios: false + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt deleted file mode 100644 index d13ff82f8518f9..00000000000000 --- a/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt +++ /dev/null @@ -1,170 +0,0 @@ -Actions Semi S700 Pin Controller - -This binding describes the pin controller found in the S700 SoC. - -Required Properties: - -- compatible: Should be "actions,s700-pinctrl" -- reg: Should contain the register base address and size of - the pin controller. -- clocks: phandle of the clock feeding the pin controller -- gpio-controller: Marks the device node as a GPIO controller. -- gpio-ranges: Specifies the mapping between gpio controller and - pin-controller pins. -- #gpio-cells: Should be two. The first cell is the gpio pin number - and the second cell is used for optional parameters. -- interrupt-controller: Marks the device node as an interrupt controller. -- #interrupt-cells: Specifies the number of cells needed to encode an - interrupt. Shall be set to 2. The first cell - defines the interrupt number, the second encodes - the trigger flags described in - bindings/interrupt-controller/interrupts.txt -- interrupts: The interrupt outputs from the controller. There is one GPIO - interrupt per GPIO bank. The number of interrupts listed depends - on the number of GPIO banks on the SoC. The interrupts must be - ordered by bank, starting with bank 0. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - -Pinmux functions are available only for the pin groups while pinconf -parameters are available for both pin groups and individual pins. - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -Required Properties: - -- pins: An array of strings, each string containing the name of a pin. - These pins are used for selecting the pull control and schmitt - trigger parameters. The following are the list of pins - available: - - eth_txd0, eth_txd1, eth_txd2, eth_txd3, eth_txen, eth_rxer, - eth_crs_dv, eth_rxd1, eth_rxd0, eth_rxd2, eth_rxd3, eth_ref_clk, - eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0, - i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1, i2s_mclk1, - pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, ks_in0, ks_in1, ks_in2, - ks_in3, ks_out0, ks_out1, ks_out2, lvds_oep, lvds_oen, lvds_odp, - lvds_odn, lvds_ocp, lvds_ocn, lvds_obp, lvds_obn, lvds_oap, - lvds_oan, lvds_eep, lvds_een, lvds_edp, lvds_edn, lvds_ecp, - lvds_ecn, lvds_ebp, lvds_ebn, lvds_eap, lvds_ean, lcd0_d18, - lcd0_d2, dsi_dp3, dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn, - dsi_dp0, dsi_dn0, dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2, - sd0_d3, sd1_d0, sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, - sd1_cmd, sd1_clk, spi0_ss, spi0_miso, uart0_rx, uart0_tx, - uart2_rx, uart2_tx, uart2_rtsb, uart2_ctsb, uart3_rx, uart3_tx, - uart3_rtsb, uart3_ctsb, i2c0_sclk, i2c0_sdata, i2c1_sclk, - i2c1_sdata, i2c2_sdata, csi_dn0, csi_dp0, csi_dn1, csi_dp1, - csi_cn, csi_cp, csi_dn2, csi_dp2, csi_dn3, csi_dp3, - sensor0_pclk, sensor0_ckout, dnand_d0, dnand_d1, dnand_d2, - dnand_d3, dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_wrb, - dnand_rdb, dnand_rdbn, dnand_dqs, dnand_dqsn, dnand_rb0, - dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1, dnand_ceb2, - dnand_ceb3, porb, clko_25m, bsel, pkg0, pkg1, pkg2, pkg3 - -- groups: An array of strings, each string containing the name of a pin - group. These pin groups are used for selecting the pinmux - functions. - rgmii_txd23_mfp, rgmii_rxd2_mfp, rgmii_rxd3_mfp, lcd0_d18_mfp, - rgmii_txd01_mfp, rgmii_txd0_mfp, rgmii_txd1_mfp, rgmii_txen_mfp, - rgmii_rxen_mfp, rgmii_rxd1_mfp, rgmii_rxd0_mfp, rgmii_ref_clk_mfp, - i2s_d0_mfp, i2s_pcm1_mfp, i2s0_pcm0_mfp, i2s1_pcm0_mfp, - i2s_d1_mfp, ks_in2_mfp, ks_in1_mfp, ks_in0_mfp, ks_in3_mfp, - ks_out0_mfp, ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp, - dsi_dp2_mfp, lcd0_d2_mfp, dsi_dp3_mfp, dsi_dn3_mfp, dsi_dp0_mfp, - lvds_ee_pn_mfp, uart2_rx_tx_mfp, spi0_i2c_pcm_mfp, dsi_dnp1_cp_d2_mfp, - dsi_dnp1_cp_d17_mfp, lvds_e_pn_mfp, dsi_dn2_mfp, uart2_rtsb_mfp, - uart2_ctsb_mfp, uart3_rtsb_mfp, uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, - sd0_d2_d3_mfp, sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp, - uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp, uart0_tx_mfp, - i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp, pcm1_in_mfp, pcm1_clk_mfp, - pcm1_sync_mfp, pcm1_out_mfp, dnand_data_wr_mfp, dnand_acle_ce0_mfp, - nand_ceb2_mfp, nand_ceb3_mfp - - These pin groups are used for selecting the drive strength - parameters. - - sirq_drv, rgmii_txd23_drv, rgmii_rxd23_drv, rgmii_txd01_txen_drv, - rgmii_rxer_drv, rgmii_crs_drv, rgmii_rxd10_drv, rgmii_ref_clk_drv, - smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv, i2s13_drv, - pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv, lcd_d18_d2_drv, - dsi_all_drv, sd0_d0_d3_drv, sd0_cmd_drv, sd0_clk_drv, spi0_all_drv, - uart0_rx_drv, uart0_tx_drv, uart2_all_drv, i2c0_all_drv, i2c12_all_drv, - sens0_pclk_drv, sens0_ckout_drv, uart3_all_drv - -- function: An array of strings, each string containing the name of the - pinmux functions. These functions can only be selected by - the corresponding pin groups. The following are the list of - pinmux functions available: - - nor, eth_rgmii, eth_sgmii, spi0, spi1, spi2, spi3, seNs0, sens1, - uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0, i2s1, - pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, p0, - sd0, sd1, sd2, i2c0, i2c1, i2c2, i2c3, dsi, lvds, usb30, - clko_25m, mipi_csi, nand, spdif, sirq0, sirq1, sirq2, bt, lcd0 - -Optional Properties: - -- bias-pull-down: No arguments. The specified pins should be configured as - pull down. -- bias-pull-up: No arguments. The specified pins should be configured as - pull up. -- input-schmitt-enable: No arguments: Enable schmitt trigger for the specified - pins -- input-schmitt-disable: No arguments: Disable schmitt trigger for the specified - pins -- drive-strength: Integer. Selects the drive strength for the specified - pins in mA. - Valid values are: - <2> - <4> - <8> - <12> - -Example: - - pinctrl: pinctrl@e01b0000 { - compatible = "actions,s700-pinctrl"; - reg = <0x0 0xe01b0000 0x0 0x1000>; - clocks = <&cmu CLK_GPIO>; - gpio-controller; - gpio-ranges = <&pinctrl 0 0 136>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = , - , - , - , - ; - - uart3-default: uart3-default { - pinmux { - groups = "uart3_rtsb_mfp", "uart3_ctsb_mfp"; - function = "uart3"; - }; - pinconf { - groups = "uart3_all_drv"; - drive-strength = <2>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.yaml new file mode 100644 index 00000000000000..9597b983c332e3 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.yaml @@ -0,0 +1,204 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/actions,s700-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Actions Semi S700 Pin Controller + +maintainers: + - Manivannan Sadhasivam + +properties: + compatible: + const: actions,s700-pinctrl + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + gpio-controller: true + + gpio-line-names: + maxItems: 136 + + gpio-ranges: true + + '#gpio-cells': + const: 2 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + interrupts: + maxItems: 5 + description: + The interrupt outputs from the controller. There is one GPIO interrupt per + GPIO bank. The interrupts must be ordered by bank, starting with + bank 0. + +additionalProperties: + type: object + description: Pin configuration subnode + additionalProperties: false + + properties: + pinmux: + description: Configure pin multiplexing. + type: object + $ref: /schemas/pinctrl/pinmux-node.yaml# + additionalProperties: false + + properties: + groups: + items: + enum: [ + rgmii_txd23_mfp, rgmii_rxd2_mfp, rgmii_rxd3_mfp, lcd0_d18_mfp, + rgmii_txd01_mfp, rgmii_txd0_mfp, rgmii_txd1_mfp, rgmii_txen_mfp, + rgmii_rxen_mfp, rgmii_rxd1_mfp, rgmii_rxd0_mfp, rgmii_ref_clk_mfp, + i2c1_dummy, i2c2_dummy, i2s_d0_mfp, i2s_pcm1_mfp, i2s0_pcm0_mfp, i2s1_pcm0_mfp, + i2s_d1_mfp, ks_in2_mfp, ks_in1_mfp, ks_in0_mfp, ks_in3_mfp, + ks_out0_mfp, ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp, + dsi_dp2_mfp, lcd0_d2_mfp, dsi_dp3_mfp, dsi_dn3_mfp, dsi_dp0_mfp, + lvds_ee_pn_mfp, uart2_rx_tx_mfp, spi0_i2c_pcm_mfp, + dsi_dnp1_cp_d2_mfp, dsi_dnp1_cp_d17_mfp, lvds_e_pn_mfp, + dsi_dn2_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp, + uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp, + sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp, + uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp, + uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp, pcm1_in_mfp, + pcm1_clk_mfp, pcm1_sync_mfp, pcm1_out_mfp, dnand_data_wr_mfp, + dnand_acle_ce0_mfp, nand_ceb2_mfp, nand_ceb3_mfp + ] + + function: + items: + enum: [ + nor, eth_rgmii, eth_sgmii, spi0, spi1, spi2, spi3, seNs0, sens1, + uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0, i2s1, pcm1, + pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, p0, sd0, sd1, + sd2, i2c0, i2c1, i2c2, i2c3, dsi, lvds, usb30, clko_25m, mipi_csi, + nand, spdif, sirq0, sirq1, sirq2, bt, lcd0 + ] + + required: + - groups + - function + + pinconf: + description: Configure pin-specific parameters. + type: object + allOf: + - $ref: /schemas/pinctrl/pincfg-node.yaml# + - $ref: /schemas/pinctrl/pinmux-node.yaml# + additionalProperties: false + + properties: + groups: + items: + enum: [ + sirq_drv, rgmii_txd23_drv, rgmii_rxd23_drv, rgmii_txd01_txen_drv, + rgmii_rxer_drv, rgmii_crs_drv, rgmii_rxd10_drv, rgmii_ref_clk_drv, + smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv, i2s13_drv, + pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv, lcd_d18_d2_drv, + dsi_all_drv, sd0_d0_d3_drv, sd0_cmd_drv, sd0_clk_drv, + spi0_all_drv, uart0_rx_drv, uart0_tx_drv, uart2_all_drv, + i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv, sens0_ckout_drv, + uart3_all_drv + ] + + pins: + items: + enum: [ + eth_txd0, eth_txd1, eth_txd2, eth_txd3, eth_txen, eth_rxer, + eth_crs_dv, eth_rxd1, eth_rxd0, eth_rxd2, eth_rxd3, eth_ref_clk, + eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0, + i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1, i2s_mclk1, + pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, ks_in0, ks_in1, ks_in2, + ks_in3, ks_out0, ks_out1, ks_out2, lvds_oep, lvds_oen, lvds_odp, + lvds_odn, lvds_ocp, lvds_ocn, lvds_obp, lvds_obn, lvds_oap, + lvds_oan, lvds_eep, lvds_een, lvds_edp, lvds_edn, lvds_ecp, + lvds_ecn, lvds_ebp, lvds_ebn, lvds_eap, lvds_ean, lcd0_d18, + lcd0_d2, dsi_dp3, dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn, + dsi_dp0, dsi_dn0, dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2, + sd0_d3, sd1_d0, sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, + sd1_clk, spi0_ss, spi0_miso, uart0_rx, uart0_tx, uart2_rx, + uart2_tx, uart2_rtsb, uart2_ctsb, uart3_rx, uart3_tx, uart3_rtsb, + uart3_ctsb, i2c0_sclk, i2c0_sdata, i2c1_sclk, i2c1_sdata, + i2c2_sclk, i2c2_sdata, csi_dn0, csi_dp0, csi_dn1, csi_dp1, csi_cn, csi_cp, + csi_dn2, csi_dp2, csi_dn3, csi_dp3, sensor0_pclk, sensor0_ckout, + dnand_d0, dnand_d1, dnand_d2, dnand_d3, dnand_d4, dnand_d5, + dnand_d6, dnand_d7, dnand_wrb, dnand_rdb, dnand_rdbn, dnand_dqs, + dnand_dqsn, dnand_rb0, dnand_ale, dnand_cle, dnand_ceb0, + dnand_ceb1, dnand_ceb2, dnand_ceb3, porb, clko_25m, bsel, pkg0, + pkg1, pkg2, pkg3 + ] + + bias-pull-down: + type: boolean + + bias-pull-up: + type: boolean + + drive-strength: + description: Selects the drive strength for the specified pins in mA. + enum: [2, 4, 8, 12] + + input-schmitt-enable: true + input-schmitt-disable: true + + oneOf: + - required: + - groups + - required: + - pins + + anyOf: + - required: [ pinmux ] + - required: [ pinconf ] + +required: + - compatible + - reg + - clocks + - gpio-controller + - gpio-ranges + - '#gpio-cells' + - interrupt-controller + - '#interrupt-cells' + - interrupts + +examples: + - | + #include + + pinctrl: pinctrl@e01b0000 { + compatible = "actions,s700-pinctrl"; + reg = <0xe01b0000 0x1000>; + clocks = <&cmu 1>; + gpio-controller; + gpio-ranges = <&pinctrl 0 0 136>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = , + , + , + , + ; + + uart3-default { + pinmux { + groups = "uart3_rtsb_mfp", "uart3_ctsb_mfp"; + function = "uart3"; + }; + pinconf { + groups = "uart3_all_drv"; + drive-strength = <2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt deleted file mode 100644 index 81b58dddd3edcb..00000000000000 --- a/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt +++ /dev/null @@ -1,204 +0,0 @@ -Actions Semi S900 Pin Controller - -This binding describes the pin controller found in the S900 SoC. - -Required Properties: - -- compatible: Should be "actions,s900-pinctrl" -- reg: Should contain the register base address and size of - the pin controller. -- clocks: phandle of the clock feeding the pin controller -- gpio-controller: Marks the device node as a GPIO controller. -- gpio-ranges: Specifies the mapping between gpio controller and - pin-controller pins. -- #gpio-cells: Should be two. The first cell is the gpio pin number - and the second cell is used for optional parameters. -- interrupt-controller: Marks the device node as an interrupt controller. -- #interrupt-cells: Specifies the number of cells needed to encode an - interrupt. Shall be set to 2. The first cell - defines the interrupt number, the second encodes - the trigger flags described in - bindings/interrupt-controller/interrupts.txt -- interrupts: The interrupt outputs from the controller. There is one GPIO - interrupt per GPIO bank. The number of interrupts listed depends - on the number of GPIO banks on the SoC. The interrupts must be - ordered by bank, starting with bank 0. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those group(s), and various pin configuration -parameters, such as pull-up, drive strength, etc. - -PIN CONFIGURATION NODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - -Pinmux functions are available only for the pin groups while pinconf -parameters are available for both pin groups and individual pins. - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -Required Properties: - -- pins: An array of strings, each string containing the name of a pin. - These pins are used for selecting the pull control and schmitt - trigger parameters. The following are the list of pins - available: - - eth_txd0, eth_txd1, eth_txen, eth_rxer, eth_crs_dv, - eth_rxd1, eth_rxd0, eth_ref_clk, eth_mdc, eth_mdio, - sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0, i2s_lrclk0, - i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1, i2s_mclk1, - pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, eram_a5, - eram_a6, eram_a7, eram_a8, eram_a9, eram_a10, eram_a11, - lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp, - lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan, - lvds_eep, lvds_een, lvds_edp, lvds_edn, lvds_ecp, - lvds_ecn, lvds_ebp, lvds_ebn, lvds_eap, lvds_ean, - sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0, sd1_d1, - sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk, - spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx, - uart0_tx, uart2_rx, uart2_tx, uart2_rtsb, uart2_ctsb, - uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb, uart4_rx, - uart4_tx, i2c0_sclk, i2c0_sdata, i2c1_sclk, i2c1_sdata, - i2c2_sclk, i2c2_sdata, csi0_dn0, csi0_dp0, csi0_dn1, - csi0_dp1, csi0_cn, csi0_cp, csi0_dn2, csi0_dp2, csi0_dn3, - csi0_dp3, dsi_dp3, dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, - dsi_cn, dsi_dp0, dsi_dn0, dsi_dp2, dsi_dn2, sensor0_pclk, - csi1_dn0,csi1_dp0,csi1_dn1, csi1_dp1, csi1_cn, csi1_cp, - sensor0_ckout, nand0_d0, nand0_d1, nand0_d2, nand0_d3, - nand0_d4, nand0_d5, nand0_d6, nand0_d7, nand0_dqs, - nand0_dqsn, nand0_ale, nand0_cle, nand0_ceb0, nand0_ceb1, - nand0_ceb2, nand0_ceb3, nand1_d0, nand1_d1, nand1_d2, - nand1_d3, nand1_d4, nand1_d5, nand1_d6, nand1_d7, nand1_dqs, - nand1_dqsn, nand1_ale, nand1_cle, nand1_ceb0, nand1_ceb1, - nand1_ceb2, nand1_ceb3, sgpio0, sgpio1, sgpio2, sgpio3 - -- groups: An array of strings, each string containing the name of a pin - group. These pin groups are used for selecting the pinmux - functions. - - lvds_oxx_uart4_mfp, rmii_mdc_mfp, rmii_mdio_mfp, sirq0_mfp, - sirq1_mfp, rmii_txd0_mfp, rmii_txd1_mfp, rmii_txen_mfp, - rmii_rxer_mfp, rmii_crs_dv_mfp, rmii_rxd1_mfp, rmii_rxd0_mfp, - rmii_ref_clk_mfp, i2s_d0_mfp, i2s_d1_mfp, i2s_lr_m_clk0_mfp, - i2s_bclk0_mfp, i2s_bclk1_mclk1_mfp, pcm1_in_out_mfp, - pcm1_clk_mfp, pcm1_sync_mfp, eram_a5_mfp, eram_a6_mfp, - eram_a7_mfp, eram_a8_mfp, eram_a9_mfp, eram_a10_mfp, - eram_a11_mfp, lvds_oep_odn_mfp, lvds_ocp_obn_mfp, - lvds_oap_oan_mfp, lvds_e_mfp, spi0_sclk_mosi_mfp, spi0_ss_mfp, - spi0_miso_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp, - uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp, - sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_clk_mfp, - uart0_rx_mfp, nand0_d0_ceb3_mfp, uart0_tx_mfp, i2c0_mfp, - csi0_cn_cp_mfp, csi0_dn0_dp3_mfp, csi1_dn0_cp_mfp, - dsi_dp3_dn1_mfp, dsi_cp_dn0_mfp, dsi_dp2_dn2_mfp, - nand1_d0_ceb1_mfp, nand1_ceb3_mfp, nand1_ceb0_mfp, - csi1_dn0_dp0_mfp, uart4_rx_tx_mfp - - - These pin groups are used for selecting the drive strength - parameters. - - sgpio3_drv, sgpio2_drv, sgpio1_drv, sgpio0_drv, - rmii_tx_d0_d1_drv, rmii_txen_rxer_drv, rmii_crs_dv_drv, - rmii_rx_d1_d0_drv, rmii_ref_clk_drv, rmii_mdc_mdio_drv, - sirq_0_1_drv, sirq2_drv, i2s_d0_d1_drv, i2s_lr_m_clk0_drv, - i2s_blk1_mclk1_drv, pcm1_in_out_drv, lvds_oap_oan_drv, - lvds_oep_odn_drv, lvds_ocp_obn_drv, lvds_e_drv, sd0_d3_d0_drv, - sd1_d3_d0_drv, sd0_sd1_cmd_clk_drv, spi0_sclk_mosi_drv, - spi0_ss_miso_drv, uart0_rx_tx_drv, uart4_rx_tx_drv, uart2_drv, - uart3_drv, i2c0_drv, i2c1_drv, i2c2_drv, sensor0_drv - - These pin groups are used for selecting the slew rate - parameters. - - sgpio3_sr, sgpio2_sr, sgpio1_sr, sgpio0_sr, rmii_tx_d0_d1_sr, - rmii_txen_rxer_sr, rmii_crs_dv_sr, rmii_rx_d1_d0_sr, - rmii_ref_clk_sr, rmii_mdc_mdio_sr, sirq_0_1_sr, sirq2_sr, - i2s_do_d1_sr, i2s_lr_m_clk0_sr, i2s_bclk0_mclk1_sr, - pcm1_in_out_sr, sd1_d3_d0_sr, sd0_sd1_clk_cmd_sr, - spi0_sclk_mosi_sr, spi0_ss_miso_sr, uart0_rx_tx_sr, - uart4_rx_tx_sr, uart2_sr, uart3_sr, i2c0_sr, i2c1_sr, i2c2_sr, - sensor0_sr - -- function: An array of strings, each string containing the name of the - pinmux functions. These functions can only be selected by - the corresponding pin groups. The following are the list of - pinmux functions available: - - eram, eth_rmii, eth_smii, spi0, spi1, spi2, spi3, sens0, - uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0, i2s1, - pcm0, pcm1, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, sd0, - sd1, sd2, sd3, i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, lvds, - usb30, usb20, gpu, mipi_csi0, mipi_csi1, mipi_dsi, nand0, - nand1, spdif, sirq0, sirq1, sirq2 - -Optional Properties: - -- bias-bus-hold: No arguments. The specified pins should retain the previous - state value. -- bias-high-impedance: No arguments. The specified pins should be configured - as high impedance. -- bias-pull-down: No arguments. The specified pins should be configured as - pull down. -- bias-pull-up: No arguments. The specified pins should be configured as - pull up. -- input-schmitt-enable: No arguments: Enable schmitt trigger for the specified - pins -- input-schmitt-disable: No arguments: Disable schmitt trigger for the specified - pins -- slew-rate: Integer. Sets slew rate for the specified pins. - Valid values are: - <0> - Slow - <1> - Fast -- drive-strength: Integer. Selects the drive strength for the specified - pins in mA. - Valid values are: - <2> - <4> - <8> - <12> - -Example: - - pinctrl: pinctrl@e01b0000 { - compatible = "actions,s900-pinctrl"; - reg = <0x0 0xe01b0000 0x0 0x1000>; - clocks = <&cmu CLK_GPIO>; - gpio-controller; - gpio-ranges = <&pinctrl 0 0 146>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = , - , - , - , - , - ; - - uart2-default: uart2-default { - pinmux { - groups = "lvds_oep_odn_mfp"; - function = "uart2"; - }; - pinconf { - groups = "lvds_oep_odn_drv"; - drive-strength = <12>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.yaml new file mode 100644 index 00000000000000..5c7b9f13226d00 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.yaml @@ -0,0 +1,219 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/actions,s900-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Actions Semi S900 Pin Controller + +maintainers: + - Manivannan Sadhasivam + +properties: + compatible: + const: actions,s900-pinctrl + + reg: + maxItems: 1 + + interrupts: + maxItems: 6 + description: The interrupt outputs from the controller. There is one GPIO + interrupt per GPIO bank. The number of interrupts listed depends on the + number of GPIO banks on the SoC. The interrupts must be ordered by bank, + starting with bank 0. + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + clocks: + maxItems: 1 + + gpio-controller: true + + gpio-line-names: + maxItems: 146 + + gpio-ranges: true + + "#gpio-cells": + const: 2 + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + - clocks + - gpio-controller + - gpio-ranges + - "#gpio-cells" + +additionalProperties: + type: object + description: Pin configuration subnode + additionalProperties: false + + properties: + pinmux: + type: object + description: Pin mux configuration + $ref: /schemas/pinctrl/pinmux-node.yaml# + additionalProperties: false + + properties: + groups: + items: + enum: [ + lvds_oxx_uart4_mfp, rmii_mdc_mfp, rmii_mdio_mfp, sirq0_mfp, + sirq1_mfp, rmii_txd0_mfp, rmii_txd1_mfp, rmii_txen_mfp, + rmii_rxer_mfp, rmii_crs_dv_mfp, rmii_rxd1_mfp, rmii_rxd0_mfp, + rmii_ref_clk_mfp, i2s_d0_mfp, i2s_d1_mfp, i2s_lr_m_clk0_mfp, + i2s_bclk0_mfp, i2s_bclk1_mclk1_mfp, pcm1_in_out_mfp, pcm1_clk_mfp, + pcm1_sync_mfp, eram_a5_mfp, eram_a6_mfp, eram_a7_mfp, eram_a8_mfp, + eram_a9_mfp, eram_a10_mfp, eram_a11_mfp, lvds_oep_odn_mfp, + lvds_ocp_obn_mfp, lvds_oap_oan_mfp, lvds_e_mfp, + spi0_sclk_mosi_mfp, spi0_ss_mfp, spi0_miso_mfp, uart2_rtsb_mfp, + uart2_ctsb_mfp, uart3_rtsb_mfp, uart3_ctsb_mfp, sd0_d0_mfp, + sd0_d1_mfp, sd0_d2_d3_mfp, sd1_d0_d3_mfp, sd0_cmd_mfp, + sd0_clk_mfp, sd1_cmd_clk_mfp, uart0_rx_mfp, nand0_d0_ceb3_mfp, + uart0_tx_mfp, i2c0_mfp, csi0_cn_cp_mfp, csi0_dn0_dp3_mfp, + csi1_dn0_cp_mfp, dsi_dp3_dn1_mfp, dsi_cp_dn0_mfp, dsi_dp2_dn2_mfp, + nand1_d0_ceb1_mfp, nand1_ceb3_mfp, nand1_ceb0_mfp, + csi1_dn0_dp0_mfp, uart4_rx_tx_mfp + ] + + function: + items: + enum: [ + eram, eth_rmii, eth_smii, spi0, spi1, spi2, spi3, sens0, + uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0, i2s1, + pcm0, pcm1, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, sd0, + sd1, sd2, sd3, i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, lvds, + usb30, usb20, gpu, mipi_csi0, mipi_csi1, mipi_dsi, nand0, + nand1, spdif, sirq0, sirq1, sirq2 + ] + + required: + - groups + - function + + pinconf: + type: object + description: Pin configuration parameters + allOf: + - $ref: /schemas/pinctrl/pincfg-node.yaml# + - $ref: /schemas/pinctrl/pinmux-node.yaml# + + additionalProperties: false + + properties: + groups: + items: + enum: [ + # pin groups for drive strength + sgpio3_drv, sgpio2_drv, sgpio1_drv, sgpio0_drv, rmii_tx_d0_d1_drv, + rmii_txen_rxer_drv, rmii_crs_dv_drv, rmii_rx_d1_d0_drv, + rmii_ref_clk_drv, rmii_mdc_mdio_drv, sirq_0_1_drv, sirq2_drv, + i2s_d0_d1_drv, i2s_lr_m_clk0_drv, i2s_blk1_mclk1_drv, + pcm1_in_out_drv, lvds_oap_oan_drv, lvds_oep_odn_drv, + lvds_ocp_obn_drv, lvds_e_drv, sd0_d3_d0_drv, sd1_d3_d0_drv, + sd0_sd1_cmd_clk_drv, spi0_sclk_mosi_drv, spi0_ss_miso_drv, + uart0_rx_tx_drv, uart4_rx_tx_drv, uart2_drv, uart3_drv, i2c0_drv, + i2c1_drv, i2c2_drv, sensor0_drv, + # pin groups for slew rate + sgpio3_sr, sgpio2_sr, sgpio1_sr, sgpio0_sr, rmii_tx_d0_d1_sr, + rmii_txen_rxer_sr, rmii_crs_dv_sr, rmii_rx_d1_d0_sr, + rmii_ref_clk_sr, rmii_mdc_mdio_sr, sirq_0_1_sr, sirq2_sr, + i2s_do_d1_sr, i2s_lr_m_clk0_sr, i2s_bclk0_mclk1_sr, + pcm1_in_out_sr, sd1_d3_d0_sr, sd0_sd1_clk_cmd_sr, + spi0_sclk_mosi_sr, spi0_ss_miso_sr, uart0_rx_tx_sr, + uart4_rx_tx_sr, uart2_sr, uart3_sr, i2c0_sr, i2c1_sr, i2c2_sr, + sensor0_sr + ] + + pins: + items: + enum: [ + eth_txd0, eth_txd1, eth_txen, eth_rxer, eth_crs_dv, eth_rxd1, + eth_rxd0, eth_ref_clk, eth_mdc, eth_mdio, sirq0, sirq1, sirq2, + i2s_d0, i2s_bclk0, i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, + i2s_lrclk1, i2s_mclk1, pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, + eram_a5, eram_a6, eram_a7, eram_a8, eram_a9, eram_a10, eram_a11, + lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp, lvds_ocn, + lvds_obp, lvds_obn, lvds_oap, lvds_oan, lvds_eep, lvds_een, + lvds_edp, lvds_edn, lvds_ecp, lvds_ecn, lvds_ebp, lvds_ebn, + lvds_eap, lvds_ean, sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0, + sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk, + spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx, uart0_tx, + uart2_rx, uart2_tx, uart2_rtsb, uart2_ctsb, uart3_rx, uart3_tx, + uart3_rtsb, uart3_ctsb, uart4_rx, uart4_tx, i2c0_sclk, i2c0_sdata, + i2c1_sclk, i2c1_sdata, i2c2_sclk, i2c2_sdata, csi0_dn0, csi0_dp0, + csi0_dn1, csi0_dp1, csi0_cn, csi0_cp, csi0_dn2, csi0_dp2, + csi0_dn3, csi0_dp3, dsi_dp3, dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, + dsi_cn, dsi_dp0, dsi_dn0, dsi_dp2, dsi_dn2, sensor0_pclk, + csi1_dn0, csi1_dp0, csi1_dn1, csi1_dp1, csi1_cn, csi1_cp, + sensor0_ckout, nand0_d0, nand0_d1, nand0_d2, nand0_d3, nand0_d4, + nand0_d5, nand0_d6, nand0_d7, nand0_dqs, nand0_dqsn, nand0_ale, + nand0_cle, nand0_ceb0, nand0_ceb1, nand0_ceb2, nand0_ceb3, + nand1_d0, nand1_d1, nand1_d2, nand1_d3, nand1_d4, nand1_d5, + nand1_d6, nand1_d7, nand1_dqs, nand1_dqsn, nand1_ale, nand1_cle, + nand1_ceb0, nand1_ceb1, nand1_ceb2, nand1_ceb3, sgpio0, sgpio1, + sgpio2, sgpio3 + ] + + bias-bus-hold: true + bias-high-impedance: true + + bias-pull-down: + type: boolean + + bias-pull-up: + type: boolean + + input-schmitt-enable: true + input-schmitt-disable: true + slew-rate: true + drive-strength: true + + oneOf: + - required: + - groups + - required: + - pins + +examples: + - | + #include + + pinctrl: pinctrl@e01b0000 { + compatible = "actions,s900-pinctrl"; + reg = <0xe01b0000 0x1000>; + clocks = <&cmu 1>; + gpio-controller; + gpio-ranges = <&pinctrl 0 0 146>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = , + , + , + , + , + ; + + uart2-default { + pinmux { + groups = "lvds_oep_odn_mfp"; + function = "uart2"; + }; + + pinconf { + groups = "lvds_oep_odn_drv"; + drive-strength = <12>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/airoha,an7583-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/airoha,an7583-pinctrl.yaml new file mode 100644 index 00000000000000..79910214d9b5c8 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/airoha,an7583-pinctrl.yaml @@ -0,0 +1,402 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/airoha,an7583-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Airoha AN7583 Pin Controller + +maintainers: + - Lorenzo Bianconi + +description: + The Airoha's AN7583 Pin controller is used to control SoC pins. + +properties: + compatible: + const: airoha,an7583-pinctrl + + interrupts: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + gpio-ranges: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - interrupts + - gpio-controller + - "#gpio-cells" + - interrupt-controller + - "#interrupt-cells" + +patternProperties: + '-pins$': + type: object + + patternProperties: + '^mux(-|$)': + type: object + + description: + pinmux configuration nodes. + + $ref: /schemas/pinctrl/pinmux-node.yaml + + properties: + function: + description: + A string containing the name of the function to mux to the group. + enum: [pon, tod_1pps, sipo, mdio, uart, i2c, jtag, pcm, spi, + pcm_spi, i2s, emmc, pnand, pcie_reset, pwm, phy1_led0, + phy2_led0, phy3_led0, phy4_led0, phy1_led1, phy2_led1, + phy3_led1, phy4_led1] + + groups: + description: + An array of strings. Each string contains the name of a group. + + required: + - function + - groups + + allOf: + - if: + properties: + function: + const: pon + then: + properties: + groups: + enum: [pon] + - if: + properties: + function: + const: tod_1pps + then: + properties: + groups: + enum: [pon_tod_1pps, gsw_tod_1pps] + - if: + properties: + function: + const: sipo + then: + properties: + groups: + enum: [sipo, sipo_rclk] + - if: + properties: + function: + const: mdio + then: + properties: + groups: + enum: [mdio] + - if: + properties: + function: + const: uart + then: + properties: + groups: + items: + enum: [uart2, uart2_cts_rts, hsuart, hsuart_cts_rts, + uart4, uart5] + maxItems: 2 + - if: + properties: + function: + const: i2c + then: + properties: + groups: + enum: [i2c1] + - if: + properties: + function: + const: jtag + then: + properties: + groups: + enum: [jtag_udi, jtag_dfd] + - if: + properties: + function: + const: pcm + then: + properties: + groups: + enum: [pcm1, pcm2] + - if: + properties: + function: + const: spi + then: + properties: + groups: + items: + enum: [spi_quad, spi_cs1] + maxItems: 2 + - if: + properties: + function: + const: pcm_spi + then: + properties: + groups: + items: + enum: [pcm_spi, pcm_spi_int, pcm_spi_rst, pcm_spi_cs1, + pcm_spi_cs2, pcm_spi_cs3, pcm_spi_cs4] + maxItems: 7 + - if: + properties: + function: + const: i2c + then: + properties: + groups: + enum: [i2s] + - if: + properties: + function: + const: emmc + then: + properties: + groups: + enum: [emmc] + - if: + properties: + function: + const: pnand + then: + properties: + groups: + enum: [pnand] + - if: + properties: + function: + const: pcie_reset + then: + properties: + groups: + enum: [pcie_reset0, pcie_reset1] + - if: + properties: + function: + const: pwm + then: + properties: + groups: + enum: [gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, + gpio7, gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, + gpio14, gpio15, gpio16, gpio17, gpio18, gpio19, + gpio20, gpio21, gpio22, gpio23, gpio24, gpio25, + gpio26, gpio27, gpio28, gpio29, gpio30, gpio31, + gpio36, gpio37, gpio38, gpio39, gpio40, gpio41, + gpio42, gpio43, gpio44, gpio45, gpio46, gpio47] + - if: + properties: + function: + const: phy1_led0 + then: + properties: + groups: + enum: [gpio1, gpio2, gpio3, gpio4] + - if: + properties: + function: + const: phy2_led0 + then: + properties: + groups: + enum: [gpio1, gpio2, gpio3, gpio4] + - if: + properties: + function: + const: phy3_led0 + then: + properties: + groups: + enum: [gpio1, gpio2, gpio3, gpio4] + - if: + properties: + function: + const: phy4_led0 + then: + properties: + groups: + enum: [gpio1, gpio2, gpio3, gpio4] + - if: + properties: + function: + const: phy1_led1 + then: + properties: + groups: + enum: [gpio8, gpio9, gpio10, gpio11] + - if: + properties: + function: + const: phy2_led1 + then: + properties: + groups: + enum: [gpio8, gpio9, gpio10, gpio11] + - if: + properties: + function: + const: phy3_led1 + then: + properties: + groups: + enum: [gpio8, gpio9, gpio10, gpio11] + - if: + properties: + function: + const: phy4_led1 + then: + properties: + groups: + enum: [gpio8, gpio9, gpio10, gpio11] + + additionalProperties: false + + '^conf(-|$)': + type: object + + description: + pinconf configuration nodes. + + $ref: /schemas/pinctrl/pincfg-node.yaml + + properties: + pins: + description: + An array of strings. Each string contains the name of a pin. + items: + enum: [uart1_txd, uart1_rxd, i2c_scl, i2c_sda, spi_cs0, spi_clk, + spi_mosi, spi_miso, gpio0, gpio1, gpio2, gpio3, gpio4, + gpio5, gpio6, gpio7, gpio8, gpio9, gpio10, gpio11, gpio12, + gpio13, gpio14, gpio15, gpio16, gpio17, gpio18, gpio19, + gpio20, gpio21, gpio22, gpio23, gpio24, gpio25, gpio26, + gpio27, gpio28, gpio29, gpio30, gpio31, gpio32, gpio33, + gpio34, gpio35, gpio36, gpio37, gpio38, gpio39, gpio40, + gpio41, gpio42, gpio43, gpio44, gpio45, gpio46, + pcie_reset0, pcie_reset1, pcie_reset2] + minItems: 1 + maxItems: 58 + + bias-disable: true + + bias-pull-up: true + + bias-pull-down: true + + input-enable: true + + output-enable: true + + output-low: true + + output-high: true + + drive-open-drain: true + + drive-strength: + description: + Selects the drive strength for MIO pins, in mA. + enum: [2, 4, 6, 8] + + required: + - pins + + additionalProperties: false + + additionalProperties: false + +additionalProperties: false + +examples: + - | + #include + + pinctrl { + compatible = "airoha,an7583-pinctrl"; + + interrupt-parent = <&gic>; + interrupts = ; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + pcie1-rst-pins { + conf { + pins = "pcie_reset1"; + drive-open-drain = <1>; + }; + }; + + pwm-pins { + mux { + function = "pwm"; + groups = "gpio18"; + }; + }; + + spi-pins { + mux { + function = "spi"; + groups = "spi_quad", "spi_cs1"; + }; + }; + + uart2-pins { + mux { + function = "uart"; + groups = "uart2", "uart2_cts_rts"; + }; + }; + + uar5-pins { + mux { + function = "uart"; + groups = "uart5"; + }; + }; + + mmc-pins { + mux { + function = "emmc"; + groups = "emmc"; + }; + }; + + mdio-pins { + mux { + function = "mdio"; + groups = "mdio"; + }; + + conf { + pins = "gpio2"; + output-enable; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml index 80974c46f3ef9e..af8979af9b45ba 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml @@ -141,6 +141,7 @@ additionalProperties: - NRTS3 - NRTS4 - OSCCLK + - PCIERC1 - PEWAKE - PWM0 - PWM1 @@ -369,6 +370,7 @@ additionalProperties: - NRTS3 - NRTS4 - OSCCLK + - PCIERC1 - PEWAKE - PWM0 - PWM1 diff --git a/Documentation/devicetree/bindings/pinctrl/berlin,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/berlin,pinctrl.txt deleted file mode 100644 index 0a2d5516e1f398..00000000000000 --- a/Documentation/devicetree/bindings/pinctrl/berlin,pinctrl.txt +++ /dev/null @@ -1,47 +0,0 @@ -* Pin-controller driver for the Marvell Berlin SoCs - -Pin control registers are part of both chip controller and system -controller register sets. Pin controller nodes should be a sub-node of -either the chip controller or system controller node. The pins -controlled are organized in groups, so no actual pin information is -needed. - -A pin-controller node should contain subnodes representing the pin group -configurations, one per function. Each subnode has the group name and -the muxing function used. - -Be aware the Marvell Berlin datasheets use the keyword 'mode' for what -is called a 'function' in the pin-controller subsystem. - -Required properties: -- compatible: should be one of: - "marvell,berlin2-soc-pinctrl", - "marvell,berlin2-system-pinctrl", - "marvell,berlin2cd-soc-pinctrl", - "marvell,berlin2cd-system-pinctrl", - "marvell,berlin2q-soc-pinctrl", - "marvell,berlin2q-system-pinctrl", - "marvell,berlin4ct-avio-pinctrl", - "marvell,berlin4ct-soc-pinctrl", - "marvell,berlin4ct-system-pinctrl", - "syna,as370-soc-pinctrl" - -Required subnode-properties: -- groups: a list of strings describing the group names. -- function: a string describing the function used to mux the groups. - -Example: - -sys_pinctrl: pin-controller { - compatible = "marvell,berlin2q-system-pinctrl"; - - uart0_pmux: uart0-pmux { - groups = "GSM12"; - function = "uart0"; - }; -}; - -&uart0 { - pinctrl-0 = <&uart0_pmux>; - pinctrl-names = "default"; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt deleted file mode 100644 index 4980776122ccc0..00000000000000 --- a/Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt +++ /dev/null @@ -1,126 +0,0 @@ -Bitmain BM1880 Pin Controller - -This binding describes the pin controller found in the BM1880 SoC. - -Required Properties: - -- compatible: Should be "bitmain,bm1880-pinctrl" -- reg: Offset and length of pinctrl space in SCTRL. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration for BM1880 SoC -includes pinmux and various pin configuration parameters, such as pull-up, -slew rate etc... - -Each configuration node can consist of multiple nodes describing the pinmux -options. The name of each subnode is not important; all subnodes should be -enumerated and processed purely based on their content. - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pinmux subnode: - -Required Properties: - -- pins: An array of strings, each string containing the name of a pin. - Valid values for pins are: - - MIO0 - MIO111 - -- groups: An array of strings, each string containing the name of a pin - group. Valid values for groups are: - - nand_grp, spi_grp, emmc_grp, sdio_grp, eth0_grp, pwm0_grp, - pwm1_grp, pwm2_grp, pwm3_grp, pwm4_grp, pwm5_grp, pwm6_grp, - pwm7_grp, pwm8_grp, pwm9_grp, pwm10_grp, pwm11_grp, pwm12_grp, - pwm13_grp, pwm14_grp, pwm15_grp, pwm16_grp, pwm17_grp, - pwm18_grp, pwm19_grp, pwm20_grp, pwm21_grp, pwm22_grp, - pwm23_grp, pwm24_grp, pwm25_grp, pwm26_grp, pwm27_grp, - pwm28_grp, pwm29_grp, pwm30_grp, pwm31_grp, pwm32_grp, - pwm33_grp, pwm34_grp, pwm35_grp, pwm36_grp, i2c0_grp, - i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp, uart0_grp, uart1_grp, - uart2_grp, uart3_grp, uart4_grp, uart5_grp, uart6_grp, - uart7_grp, uart8_grp, uart9_grp, uart10_grp, uart11_grp, - uart12_grp, uart13_grp, uart14_grp, uart15_grp, gpio0_grp, - gpio1_grp, gpio2_grp, gpio3_grp, gpio4_grp, gpio5_grp, - gpio6_grp, gpio7_grp, gpio8_grp, gpio9_grp, gpio10_grp, - gpio11_grp, gpio12_grp, gpio13_grp, gpio14_grp, gpio15_grp, - gpio16_grp, gpio17_grp, gpio18_grp, gpio19_grp, gpio20_grp, - gpio21_grp, gpio22_grp, gpio23_grp, gpio24_grp, gpio25_grp, - gpio26_grp, gpio27_grp, gpio28_grp, gpio29_grp, gpio30_grp, - gpio31_grp, gpio32_grp, gpio33_grp, gpio34_grp, gpio35_grp, - gpio36_grp, gpio37_grp, gpio38_grp, gpio39_grp, gpio40_grp, - gpio41_grp, gpio42_grp, gpio43_grp, gpio44_grp, gpio45_grp, - gpio46_grp, gpio47_grp, gpio48_grp, gpio49_grp, gpio50_grp, - gpio51_grp, gpio52_grp, gpio53_grp, gpio54_grp, gpio55_grp, - gpio56_grp, gpio57_grp, gpio58_grp, gpio59_grp, gpio60_grp, - gpio61_grp, gpio62_grp, gpio63_grp, gpio64_grp, gpio65_grp, - gpio66_grp, gpio67_grp, eth1_grp, i2s0_grp, i2s0_mclkin_grp, - i2s1_grp, i2s1_mclkin_grp, spi0_grp - -- function: An array of strings, each string containing the name of the - pinmux functions. The following are the list of pinmux - functions available: - - nand, spi, emmc, sdio, eth0, pwm0, pwm1, pwm2, pwm3, pwm4, - pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11, pwm12, pwm13, - pwm14, pwm15, pwm16, pwm17, pwm18, pwm19, pwm20, pwm21, pwm22, - pwm23, pwm24, pwm25, pwm26, pwm27, pwm28, pwm29, pwm30, pwm31, - pwm32, pwm33, pwm34, pwm35, pwm36, i2c0, i2c1, i2c2, i2c3, - i2c4, uart0, uart1, uart2, uart3, uart4, uart5, uart6, uart7, - uart8, uart9, uart10, uart11, uart12, uart13, uart14, uart15, - gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, gpio8, - gpio9, gpio10, gpio11, gpio12, gpio13, gpio14, gpio15, gpio16, - gpio17, gpio18, gpio19, gpio20, gpio21, gpio22, gpio23, - gpio24, gpio25, gpio26, gpio27, gpio28, gpio29, gpio30, - gpio31, gpio32, gpio33, gpio34, gpio35, gpio36, gpio37, - gpio38, gpio39, gpio40, gpio41, gpio42, gpio43, gpio44, - gpio45, gpio46, gpio47, gpio48, gpio49, gpio50, gpio51, - gpio52, gpio53, gpio54, gpio55, gpio56, gpio57, gpio58, - gpio59, gpio60, gpio61, gpio62, gpio63, gpio64, gpio65, - gpio66, gpio67, eth1, i2s0, i2s0_mclkin, i2s1, i2s1_mclkin, - spi0 - -Optional Properties: - -- bias-disable: No arguments. Disable pin bias. -- bias-pull-down: No arguments. The specified pins should be configured as - pull down. -- bias-pull-up: No arguments. The specified pins should be configured as - pull up. -- input-schmitt-enable: No arguments: Enable schmitt trigger for the specified - pins -- input-schmitt-disable: No arguments: Disable schmitt trigger for the specified - pins -- slew-rate: Integer. Sets slew rate for the specified pins. - Valid values are: - <0> - Slow - <1> - Fast -- drive-strength: Integer. Selects the drive strength for the specified - pins in mA. - Valid values are: - <4> - <8> - <12> - <16> - <20> - <24> - <28> - <32> - -Example: - pinctrl: pinctrl@400 { - compatible = "bitmain,bm1880-pinctrl"; - reg = <0x400 0x120>; - - pinctrl_uart0_default: uart0-default { - pinmux { - groups = "uart0_grp"; - function = "uart0"; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.yaml new file mode 100644 index 00000000000000..542be98708382a --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/bitmain,bm1880-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bitmain BM1880 Pin Controller + +maintainers: + - Manivannan Sadhasivam + +properties: + compatible: + const: bitmain,bm1880-pinctrl + + reg: + maxItems: 1 + +additionalProperties: + description: A pin configuration node. + type: object + additionalProperties: false + + properties: + pinmux: + type: object + description: Pin multiplexing parameters. + allOf: + - $ref: /schemas/pinctrl/pincfg-node.yaml# + - $ref: /schemas/pinctrl/pinmux-node.yaml# + additionalProperties: false + + properties: + pins: + items: + pattern: '^MIO[0-9]+$' + + groups: + items: + enum: [ + nand_grp, spi_grp, emmc_grp, sdio_grp, eth0_grp, pwm0_grp, + pwm1_grp, pwm2_grp, pwm3_grp, pwm4_grp, pwm5_grp, pwm6_grp, + pwm7_grp, pwm8_grp, pwm9_grp, pwm10_grp, pwm11_grp, pwm12_grp, + pwm13_grp, pwm14_grp, pwm15_grp, pwm16_grp, pwm17_grp, + pwm18_grp, pwm19_grp, pwm20_grp, pwm21_grp, pwm22_grp, + pwm23_grp, pwm24_grp, pwm25_grp, pwm26_grp, pwm27_grp, + pwm28_grp, pwm29_grp, pwm30_grp, pwm31_grp, pwm32_grp, + pwm33_grp, pwm34_grp, pwm35_grp, pwm36_grp, i2c0_grp, + i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp, uart0_grp, uart1_grp, + uart2_grp, uart3_grp, uart4_grp, uart5_grp, uart6_grp, + uart7_grp, uart8_grp, uart9_grp, uart10_grp, uart11_grp, + uart12_grp, uart13_grp, uart14_grp, uart15_grp, gpio0_grp, + gpio1_grp, gpio2_grp, gpio3_grp, gpio4_grp, gpio5_grp, + gpio6_grp, gpio7_grp, gpio8_grp, gpio9_grp, gpio10_grp, + gpio11_grp, gpio12_grp, gpio13_grp, gpio14_grp, gpio15_grp, + gpio16_grp, gpio17_grp, gpio18_grp, gpio19_grp, gpio20_grp, + gpio21_grp, gpio22_grp, gpio23_grp, gpio24_grp, gpio25_grp, + gpio26_grp, gpio27_grp, gpio28_grp, gpio29_grp, gpio30_grp, + gpio31_grp, gpio32_grp, gpio33_grp, gpio34_grp, gpio35_grp, + gpio36_grp, gpio37_grp, gpio38_grp, gpio39_grp, gpio40_grp, + gpio41_grp, gpio42_grp, gpio43_grp, gpio44_grp, gpio45_grp, + gpio46_grp, gpio47_grp, gpio48_grp, gpio49_grp, gpio50_grp, + gpio51_grp, gpio52_grp, gpio53_grp, gpio54_grp, gpio55_grp, + gpio56_grp, gpio57_grp, gpio58_grp, gpio59_grp, gpio60_grp, + gpio61_grp, gpio62_grp, gpio63_grp, gpio64_grp, gpio65_grp, + gpio66_grp, gpio67_grp, eth1_grp, i2s0_grp, i2s0_mclkin_grp, + i2s1_grp, i2s1_mclkin_grp, spi0_grp + ] + + function: + items: + enum: [ + nand, spi, emmc, sdio, eth0, pwm0, pwm1, pwm2, pwm3, pwm4, + pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11, pwm12, pwm13, + pwm14, pwm15, pwm16, pwm17, pwm18, pwm19, pwm20, pwm21, pwm22, + pwm23, pwm24, pwm25, pwm26, pwm27, pwm28, pwm29, pwm30, pwm31, + pwm32, pwm33, pwm34, pwm35, pwm36, i2c0, i2c1, i2c2, i2c3, + i2c4, uart0, uart1, uart2, uart3, uart4, uart5, uart6, uart7, + uart8, uart9, uart10, uart11, uart12, uart13, uart14, uart15, + gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, gpio8, + gpio9, gpio10, gpio11, gpio12, gpio13, gpio14, gpio15, gpio16, + gpio17, gpio18, gpio19, gpio20, gpio21, gpio22, gpio23, + gpio24, gpio25, gpio26, gpio27, gpio28, gpio29, gpio30, + gpio31, gpio32, gpio33, gpio34, gpio35, gpio36, gpio37, + gpio38, gpio39, gpio40, gpio41, gpio42, gpio43, gpio44, + gpio45, gpio46, gpio47, gpio48, gpio49, gpio50, gpio51, + gpio52, gpio53, gpio54, gpio55, gpio56, gpio57, gpio58, + gpio59, gpio60, gpio61, gpio62, gpio63, gpio64, gpio65, + gpio66, gpio67, eth1, i2s0, i2s0_mclkin, i2s1, i2s1_mclkin, + spi0 + ] + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + input-schmitt-enable: true + input-schmitt-disable: true + + slew-rate: + description: > + Sets slew rate. Valid values: 0 = Slow, 1 = Fast. + enum: [0, 1] + + drive-strength: + enum: [4, 8, 12, 16, 20, 24, 28, 32] + + oneOf: + - required: + - pins + - required: + - groups + + required: + - function + +required: + - compatible + - reg + +examples: + - | + pinctrl@400 { + compatible = "bitmain,bm1880-pinctrl"; + reg = <0x400 0x120>; + + uart0-default { + pinmux { + groups = "uart0_grp"; + function = "uart0"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm21664-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm21664-pinctrl.yaml index 1283a588416d40..a2e609b066eeac 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm21664-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm21664-pinctrl.yaml @@ -116,7 +116,6 @@ patternProperties: input-schmitt-enable: false input-schmitt-disable: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt deleted file mode 100644 index 40e0a9a19525b4..00000000000000 --- a/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt +++ /dev/null @@ -1,102 +0,0 @@ -Broadcom Northstar2 IOMUX Controller - -The Northstar2 IOMUX controller supports group based mux configuration. There -are some individual pins that support modifying the pinconf parameters. - -Required properties: - -- compatible: - Must be "brcm,ns2-pinmux" - -- reg: - Define the base and range of the I/O address space that contains the - Northstar2 IOMUX and pin configuration registers. - -Properties in sub nodes: - -- function: - The mux function to select - -- groups: - The list of groups to select with a given function - -- pins: - List of pin names to change configuration - -The generic properties bias-disable, bias-pull-down, bias-pull-up, -drive-strength, slew-rate, input-enable, input-disable are supported -for some individual pins listed at the end. - -For more details, refer to -Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - -For example: - - pinctrl: pinctrl@6501d130 { - compatible = "brcm,ns2-pinmux"; - reg = <0x6501d130 0x08>, - <0x660a0028 0x04>, - <0x660009b0 0x40>; - - pinctrl-names = "default"; - pinctrl-0 = <&nand_sel>, <&uart3_rx>, <&sdio0_d4>; - - /* Select nand function */ - nand_sel: nand_sel { - function = "nand"; - groups = "nand_grp"; - }; - - /* Pull up the uart3 rx pin */ - uart3_rx: uart3_rx { - pins = "uart3_sin"; - bias-pull-up; - }; - - /* Set the drive strength of sdio d4 pin */ - sdio0_d4: sdio0_d4 { - pins = "sdio0_data4"; - drive-strength = <8>; - }; - }; - -List of supported functions and groups in Northstar2: - -"nand": "nand_grp" - -"nor": "nor_data_grp", "nor_adv_grp", "nor_addr_0_3_grp", "nor_addr_4_5_grp", - "nor_addr_6_7_grp", "nor_addr_8_9_grp", "nor_addr_10_11_grp", - "nor_addr_12_15_grp" - -"gpio": "gpio_0_1_grp", "gpio_2_5_grp", "gpio_6_7_grp", "gpio_8_9_grp", - "gpio_10_11_grp", "gpio_12_13_grp", "gpio_14_17_grp", "gpio_18_19_grp", - "gpio_20_21_grp", "gpio_22_23_grp", "gpio_24_25_grp", "gpio_26_27_grp", - "gpio_28_29_grp", "gpio_30_31_grp" - -"pcie": "pcie_ab1_clk_wak_grp", "pcie_a3_clk_wak_grp", "pcie_b3_clk_wak_grp", - "pcie_b2_clk_wak_grp", "pcie_a2_clk_wak_grp" - -"uart0": "uart0_modem_grp", "uart0_rts_cts_grp", "uart0_in_out_grp" - -"uart1": "uart1_ext_clk_grp", "uart1_dcd_dsr_grp", "uart1_ri_dtr_grp", - "uart1_rts_cts_grp", "uart1_in_out_grp" - -"uart2": "uart2_rts_cts_grp" - -"pwm": "pwm_0_grp", "pwm_1_grp", "pwm_2_grp", "pwm_3_grp" - - -List of pins that support pinconf parameters: - -"qspi_wp", "qspi_hold", "qspi_cs", "qspi_sck", "uart3_sin", "uart3_sout", -"qspi_mosi", "qspi_miso", "spi0_fss", "spi0_rxd", "spi0_txd", "spi0_sck", -"spi1_fss", "spi1_rxd", "spi1_txd", "spi1_sck", "sdio0_data7", -"sdio0_emmc_rst", "sdio0_led_on", "sdio0_wp", "sdio0_data3", "sdio0_data4", -"sdio0_data5", "sdio0_data6", "sdio0_cmd", "sdio0_data0", "sdio0_data1", -"sdio0_data2", "sdio1_led_on", "sdio1_wp", "sdio0_cd_l", "sdio0_clk", -"sdio1_data5", "sdio1_data6", "sdio1_data7", "sdio1_emmc_rst", "sdio1_data1", -"sdio1_data2", "sdio1_data3", "sdio1_data4", "sdio1_cd_l", "sdio1_clk", -"sdio1_cmd", "sdio1_data0", "ext_mdio_0", "ext_mdc_0", "usb3_p1_vbus_ppc", -"usb3_p1_overcurrent", "usb3_p0_vbus_ppc", "usb3_p0_overcurrent", -"usb2_presence_indication", "usb2_vbus_present", "usb2_vbus_ppc", -"usb2_overcurrent", "sata_led1", "sata_led0" diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.yaml new file mode 100644 index 00000000000000..1de23c06fa49b1 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/brcm,ns2-pinmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Northstar2 IOMUX Controller + +maintainers: + - Ray Jui + - Scott Branden + +properties: + compatible: + const: brcm,ns2-pinmux + + reg: + maxItems: 3 + +additionalProperties: + description: Pin group node properties + type: object + allOf: + - $ref: /schemas/pinctrl/pincfg-node.yaml# + - $ref: /schemas/pinctrl/pinmux-node.yaml# + additionalProperties: false + + properties: + function: + description: The mux function to select + $ref: /schemas/types.yaml#/definitions/string + + groups: + items: + enum: [ + nand_grp, nor_data_grp, nor_adv_grp, nor_addr_0_3_grp, + nor_addr_4_5_grp, nor_addr_6_7_grp, nor_addr_8_9_grp, + nor_addr_10_11_grp, nor_addr_12_15_grp, gpio_0_1_grp, gpio_2_5_grp, + gpio_6_7_grp, gpio_8_9_grp, gpio_10_11_grp, gpio_12_13_grp, + gpio_14_17_grp, gpio_18_19_grp, gpio_20_21_grp, gpio_22_23_grp, + gpio_24_25_grp, gpio_26_27_grp, gpio_28_29_grp, gpio_30_31_grp, + pcie_ab1_clk_wak_grp, pcie_a3_clk_wak_grp, pcie_b3_clk_wak_grp, + pcie_b2_clk_wak_grp, pcie_a2_clk_wak_grp, uart0_modem_grp, + uart0_rts_cts_grp, uart0_in_out_grp, uart1_ext_clk_grp, + uart1_dcd_dsr_grp, uart1_ri_dtr_grp, uart1_rts_cts_grp, + uart1_in_out_grp, uart2_rts_cts_grp, pwm_0_grp, pwm_1_grp, pwm_2_grp, + pwm_3_grp + ] + + pins: + items: + enum: [ + qspi_wp, qspi_hold, qspi_cs, qspi_sck, uart3_sin, uart3_sout, + qspi_mosi, qspi_miso, spi0_fss, spi0_rxd, spi0_txd, spi0_sck, + spi1_fss, spi1_rxd, spi1_txd, spi1_sck, sdio0_data7, sdio0_emmc_rst, + sdio0_led_on, sdio0_wp, sdio0_data3, sdio0_data4, sdio0_data5, + sdio0_data6, sdio0_cmd, sdio0_data0, sdio0_data1, sdio0_data2, + sdio1_led_on, sdio1_wp, sdio0_cd_l, sdio0_clk, sdio1_data5, + sdio1_data6, sdio1_data7, sdio1_emmc_rst, sdio1_data1, sdio1_data2, + sdio1_data3, sdio1_data4, sdio1_cd_l, sdio1_clk, sdio1_cmd, + sdio1_data0, ext_mdio_0, ext_mdc_0, usb3_p1_vbus_ppc, + usb3_p1_overcurrent, usb3_p0_vbus_ppc, usb3_p0_overcurrent, + usb2_presence_indication, usb2_vbus_present, usb2_vbus_ppc, + usb2_overcurrent, sata_led1, sata_led0 + ] + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + slew-rate: true + input-enable: true + input-disable: true + + oneOf: + - required: + - groups + - function + - required: + - pins + +required: + - compatible + - reg + +examples: + - | + pinctrl@6501d130 { + compatible = "brcm,ns2-pinmux"; + reg = <0x6501d130 0x08>, + <0x660a0028 0x04>, + <0x660009b0 0x40>; + + /* Select nand function */ + nand-sel { + function = "nand"; + groups = "nand_grp"; + }; + + /* Pull up the uart3 rx pin */ + uart3-rx { + pins = "uart3_sin"; + bias-pull-up; + }; + + /* Set the drive strength of sdio d4 pin */ + sdio0-d4 { + pins = "sdio0_data4"; + drive-strength = <8>; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/cix,sky1-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/cix,sky1-pinctrl.yaml new file mode 100644 index 00000000000000..8ed53496c386f7 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/cix,sky1-pinctrl.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/cix,sky1-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cix Sky1 Soc Pin Controller + +maintainers: + - Gary Yang + +description: + The pin-controller is used to control Soc pins. There are two pin-controllers + on Cix Sky1 platform. one is used under S0 state, the other one is used under + S0 and S5 state. + +properties: + compatible: + enum: + - cix,sky1-pinctrl + - cix,sky1-pinctrl-s5 + + reg: + items: + - description: gpio base + +patternProperties: + '-cfg$': + type: object + additionalProperties: false + + description: + A pinctrl node should contain at least one subnode representing the + pinctrl groups available on the machine. + + patternProperties: + 'pins$': + type: object + additionalProperties: false + + description: + Each subnode will list the pins it needs, and how they should + be configured, with regard to muxer configuration, bias pull, + and drive strength. + + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + properties: + pinmux: + description: + Values are constructed from pin number and mux setting, pin + number is left shifted by 8 bits, then ORed with mux setting + + bias-disable: true + + bias-pull-up: true + + bias-pull-down: true + + drive-strength: + description: + typical current when output high level. + enum: [ 2, 3, 5, 6, 8, 9, 11, 12, 13, 14, 17, 18, 20, 21, 23, + 24 ] + + required: + - pinmux + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #define CIX_PAD_GPIO012_FUNC_GPIO012 (11 << 8 | 0x0) + pinctrl@4170000 { + compatible = "cix,sky1-pinctrl"; + reg = <0x4170000 0x1000>; + + wifi_vbat_gpio: wifi-vbat-gpio-cfg { + pins { + pinmux = ; + bias-pull-up; + drive-strength = <8>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx9-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx9-pinctrl.yaml index a438db8884f2dd..96e7b699527373 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx9-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx9-pinctrl.yaml @@ -58,7 +58,6 @@ patternProperties: - description: | "pad_setting" indicates the pad configuration value to be applied. - required: - fsl,pins diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,ap806-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/marvell,ap806-pinctrl.yaml new file mode 100644 index 00000000000000..00a7e358a8c97b --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,ap806-pinctrl.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/marvell,ap806-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell AP806 pin controller + +maintainers: + - Gregory Clement + - Miquel Raynal + +properties: + compatible: + const: marvell,ap806-pinctrl + + reg: + maxItems: 1 + +patternProperties: + '-pins$': + type: object + additionalProperties: false + + properties: + marvell,function: + $ref: /schemas/types.yaml#/definitions/string + description: + Indicates the function to select. + enum: [ gpio, i2c0, sdio, spi0, uart0, uart1 ] + + marvell,pins: + $ref: /schemas/types.yaml#/definitions/string-array + description: + Array of MPP pins to be used for the given function. + minItems: 1 + maxItems: 20 + items: + enum: [ + mpp0, mpp1, mpp2, mpp3, mpp4, mpp5, mpp6, mpp7, mpp8, mpp9, mpp10, + mpp11, mpp12, mpp13, mpp14, mpp15, mpp16, mpp17, mpp18, mpp19 + ] + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + +additionalProperties: false + +examples: + - | + pinctrl { + compatible = "marvell,ap806-pinctrl"; + + uart0_pins: uart0-pins { + marvell,pins = "mpp11", "mpp19"; + marvell,function = "uart0"; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt deleted file mode 100644 index ecec514b315506..00000000000000 --- a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt +++ /dev/null @@ -1,195 +0,0 @@ -* Marvell Armada 37xx SoC pin and gpio controller - -Each Armada 37xx SoC come with two pin and gpio controller one for the -south bridge and the other for the north bridge. - -Inside this set of register the gpio latch allows exposing some -configuration of the SoC and especially the clock frequency of the -xtal. Hence, this node is a represent as syscon allowing sharing the -register between multiple hardware block. - -GPIO and pin controller: ------------------------- - -Main node: - -Refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning -of the phrase "pin configuration node". - -Required properties for pinctrl driver: - -- compatible: "marvell,armada3710-sb-pinctrl", "syscon, "simple-mfd" - for the south bridge - "marvell,armada3710-nb-pinctrl", "syscon, "simple-mfd" - for the north bridge -- reg: The first set of register are for pinctrl/gpio and the second - set for the interrupt controller -- interrupts: list of the interrupt use by the gpio - -Available groups and functions for the North bridge: - -group: jtag - - pins 20-24 - - functions jtag, gpio - -group sdio0 - - pins 8-10 - - functions sdio, gpio - -group emmc_nb - - pins 27-35 - - functions emmc, gpio - -group pwm0 - - pin 11 (GPIO1-11) - - functions pwm, led, gpio - -group pwm1 - - pin 12 - - functions pwm, led, gpio - -group pwm2 - - pin 13 - - functions pwm, led, gpio - -group pwm3 - - pin 14 - - functions pwm, led, gpio - -group pmic1 - - pin 7 - - functions pmic, gpio - -group pmic0 - - pin 6 - - functions pmic, gpio - -group i2c2 - - pins 2-3 - - functions i2c, gpio - -group i2c1 - - pins 0-1 - - functions i2c, gpio - -group spi_cs1 - - pin 17 - - functions spi, gpio - -group spi_cs2 - - pin 18 - - functions spi, gpio - -group spi_cs3 - - pin 19 - - functions spi, gpio - -group onewire - - pin 4 - - functions onewire, gpio - -group uart1 - - pins 25-26 - - functions uart, gpio - -group spi_quad - - pins 15-16 - - functions spi, gpio - -group uart2 - - pins 9-10 and 18-19 - - functions uart, gpio - -Available groups and functions for the South bridge: - -group usb32_drvvbus0 - - pin 36 - - functions drvbus, gpio - -group usb2_drvvbus1 - - pin 37 - - functions drvbus, gpio - -group sdio_sb - - pins 60-65 - - functions sdio, gpio - -group rgmii - - pins 42-53 - - functions mii, gpio - -group pcie1 - - pins 39 - - functions pcie, gpio - -group pcie1_clkreq - - pins 40 - - functions pcie, gpio - -group pcie1_wakeup - - pins 41 - - functions pcie, gpio - -group smi - - pins 54-55 - - functions smi, gpio - -group ptp - - pins 56 - - functions ptp, gpio - -group ptp_clk - - pin 57 - - functions ptp, mii - -group ptp_trig - - pin 58 - - functions ptp, mii - -group mii_col - - pin 59 - - functions mii, mii_err - -GPIO subnode: - -Please refer to gpio.txt in this directory for details of gpio-ranges property -and the common GPIO bindings used by client devices. - -Required properties for gpio driver under the gpio subnode: -- interrupts: List of interrupt specifier for the controllers interrupt. -- gpio-controller: Marks the device node as a gpio controller. -- #gpio-cells: Should be 2. The first cell is the GPIO number and the - second cell specifies GPIO flags, as defined in - . Only the GPIO_ACTIVE_HIGH and - GPIO_ACTIVE_LOW flags are supported. -- gpio-ranges: Range of pins managed by the GPIO controller. - -Xtal Clock bindings for Marvell Armada 37xx SoCs ------------------------------------------------- - -see Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt - - -Example: -pinctrl_sb: pinctrl-sb@18800 { - compatible = "marvell,armada3710-sb-pinctrl", "syscon", "simple-mfd"; - reg = <0x18800 0x100>, <0x18C00 0x20>; - gpio { - #gpio-cells = <2>; - gpio-ranges = <&pinctrl_sb 0 0 29>; - gpio-controller; - interrupts = - , - , - , - , - ; - }; - - rgmii_pins: mii-pins { - groups = "rgmii"; - function = "mii"; - }; - -}; diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-7k-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/marvell,armada-7k-pinctrl.yaml new file mode 100644 index 00000000000000..88910ad170e558 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-7k-pinctrl.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/marvell,armada-7k-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Armada 7K/8K pin controller + +maintainers: + - Gregory Clement + - Miquel Raynal + +properties: + compatible: + enum: + - marvell,armada-7k-pinctrl + - marvell,armada-8k-cpm-pinctrl + - marvell,armada-8k-cps-pinctrl + - marvell,cp115-standalone-pinctrl + + reg: + maxItems: 1 + +patternProperties: + '-pins(-.+)?$': + type: object + additionalProperties: false + + properties: + marvell,function: + $ref: /schemas/types.yaml#/definitions/string + description: + Indicates the function to select. + enum: [ + au, dev, ge, ge0, ge1, gpio, i2c0, i2c1, led, link, mii, mss_gpio0, + mss_gpio1, mss_gpio2, mss_gpio3, mss_gpio4, mss_gpio5, mss_gpio6, + mss_gpio7, mss_i2c, mss_spi, mss_uart, nf, pcie, pcie0, pcie1, pcie2, + ptp, rei, sata0, sata1, sdio, sdio_cd, sdio_wp, sei, spi0, spi1, + synce1, synce2, tdm, uart0, uart1, uart2, uart3, wakeup, xg + ] + + marvell,pins: + $ref: /schemas/types.yaml#/definitions/string-array + description: + Array of MPP pins to be used for the given function. + minItems: 1 + maxItems: 63 + items: + pattern: '^mpp([1-5]?[0-9]|6[0-2])$' + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + +additionalProperties: false + +examples: + - | + pinctrl { + compatible = "marvell,armada-7k-pinctrl"; + + nand_pins: nand-pins { + marvell,pins = + "mpp15", "mpp16", "mpp17", "mpp18", + "mpp19", "mpp20", "mpp21", "mpp22", + "mpp23", "mpp24", "mpp25", "mpp26", + "mpp27"; + marvell,function = "dev"; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada3710-xb-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/marvell,armada3710-xb-pinctrl.yaml new file mode 100644 index 00000000000000..51bad2e8d6f1f7 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada3710-xb-pinctrl.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/marvell,armada3710-xb-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Armada 37xx SoC pin and gpio controller + +maintainers: + - Gregory CLEMENT + - Marek Behún + - Miquel Raynal + +description: > + Each Armada 37xx SoC come with two pin and gpio controller one for the south + bridge and the other for the north bridge. + + Inside this set of register the gpio latch allows exposing some configuration + of the SoC and especially the clock frequency of the xtal. Hence, this node is + a represent as syscon allowing sharing the register between multiple hardware + block. + +properties: + compatible: + items: + - enum: + - marvell,armada3710-sb-pinctrl + - marvell,armada3710-nb-pinctrl + - const: syscon + - const: simple-mfd + + reg: + items: + - description: pinctrl and GPIO controller registers + - description: interrupt controller registers + + gpio: + description: GPIO controller subnode + type: object + additionalProperties: false + + properties: + '#gpio-cells': + const: 2 + + gpio-controller: true + + gpio-ranges: + description: Range of pins managed by the GPIO controller + + '#interrupt-cells': + const: 2 + + interrupt-controller: true + + interrupts: + description: List of interrupt specifiers for the GPIO controller + + required: + - '#gpio-cells' + - gpio-ranges + - gpio-controller + - '#interrupt-cells' + - interrupt-controller + - interrupts + + xtal-clk: + type: object + additionalProperties: false + + properties: + compatible: + const: marvell,armada-3700-xtal-clock + + '#clock-cells': + const: 0 + + clock-output-names: true + +patternProperties: + '-pins$': + $ref: pinmux-node.yaml# + additionalProperties: false + + properties: + groups: + enum: [ emmc_nb, i2c1, i2c2, jtag, mii_col, onewire, pcie1, + pcie1_clkreq, pcie1_wakeup, pmic0, pmic1, ptp, ptp_clk, + ptp_trig, pwm0, pwm1, pwm2, pwm3, rgmii, sdio0, sdio_sb, smi, + spi_cs1, spi_cs2, spi_cs3, spi_quad, uart1, uart2, + usb2_drvvbus1, usb32_drvvbus ] + + function: + enum: [ drvbus, emmc, gpio, i2c, jtag, led, mii, mii_err, onewire, + pcie, pmic, ptp, pwm, sdio, smi, spi, uart ] + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include + + pinctrl_sb: pinctrl@18800 { + compatible = "marvell,armada3710-sb-pinctrl", "syscon", "simple-mfd"; + reg = <0x18800 0x100>, <0x18C00 0x20>; + + gpio { + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_sb 0 0 29>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + interrupts = + , + , + , + , + ; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,berlin2-soc-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/marvell,berlin2-soc-pinctrl.yaml new file mode 100644 index 00000000000000..6ace3bf5433bd0 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,berlin2-soc-pinctrl.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/marvell,berlin2-soc-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Berlin pin-controller driver + +maintainers: + - Antoine Tenart + - Jisheng Zhang + +description: > + Pin control registers are part of both chip controller and system controller + register sets. Pin controller nodes should be a sub-node of either the chip + controller or system controller node. The pins controlled are organized in + groups, so no actual pin information is needed. + + A pin-controller node should contain subnodes representing the pin group + configurations, one per function. Each subnode has the group name and the + muxing function used. + + Be aware the Marvell Berlin datasheets use the keyword 'mode' for what is + called a 'function' in the pin-controller subsystem. + +properties: + compatible: + items: + - enum: + - marvell,berlin2-soc-pinctrl + - marvell,berlin2-system-pinctrl + - marvell,berlin2cd-soc-pinctrl + - marvell,berlin2cd-system-pinctrl + - marvell,berlin2q-soc-pinctrl + - marvell,berlin2q-system-pinctrl + - marvell,berlin4ct-avio-pinctrl + - marvell,berlin4ct-soc-pinctrl + - marvell,berlin4ct-system-pinctrl + - syna,as370-soc-pinctrl + + reg: + maxItems: 1 + +additionalProperties: + description: Pin group configuration subnodes. + type: object + $ref: /schemas/pinctrl/pinmux-node.yaml# + additionalProperties: false + + properties: + groups: + description: List of pin group names. + $ref: /schemas/types.yaml#/definitions/string-array + + function: + description: Function used to mux the group. + $ref: /schemas/types.yaml#/definitions/string + + required: + - groups + - function + +allOf: + - if: + properties: + compatible: + contains: + enum: + - marvell,berlin4ct-avio-pinctrl + - marvell,berlin4ct-soc-pinctrl + - marvell,berlin4ct-system-pinctrl + - syna,as370-soc-pinctrl + then: + required: + - reg + +examples: + - | + pinctrl { + compatible = "marvell,berlin2q-system-pinctrl"; + + uart0-pmux { + groups = "GSM12"; + function = "uart0"; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6878-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6878-pinctrl.yaml new file mode 100644 index 00000000000000..8d44194a793896 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6878-pinctrl.yaml @@ -0,0 +1,211 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt6878-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT6878 Pin Controller + +maintainers: + - AngeloGioacchino Del Regno + - Igor Belwon + +description: + The MediaTek MT6878 Pin controller is used to control SoC pins. + +properties: + compatible: + const: mediatek,mt6878-pinctrl + + reg: + items: + - description: pin controller base + - description: bl group IO + - description: bm group IO + - description: br group IO + - description: bl1 group IO + - description: br1 group IO + - description: lm group IO + - description: lt group IO + - description: rm group IO + - description: rt group IO + - description: EINT controller E block + - description: EINT controller S block + - description: EINT controller W block + - description: EINT controller C block + + reg-names: + items: + - const: base + - const: bl + - const: bm + - const: br + - const: bl1 + - const: br1 + - const: lm + - const: lt + - const: rm + - const: rt + - const: eint-e + - const: eint-s + - const: eint-w + - const: eint-c + + gpio-controller: true + + '#gpio-cells': + description: + Number of cells in GPIO specifier. Since the generic GPIO binding is used, + the amount of cells must be specified as 2. See the below mentioned gpio + binding representation for description of particular cells. + const: 2 + + gpio-ranges: + maxItems: 1 + + gpio-line-names: + maxItems: 216 + + interrupts: + description: The interrupt outputs to sysirq + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + +# PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + additionalProperties: false + + patternProperties: + '^pins': + type: object + allOf: + - $ref: /schemas/pinctrl/pincfg-node.yaml + - $ref: /schemas/pinctrl/pinmux-node.yaml + description: + A pinctrl node should contain at least one subnodes representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive strength, input enable/disable and input + schmitt. + + properties: + pinmux: + description: + Integer array, represents gpio pin number and mux setting. + Supported pin number and mux are defined as macros in + arch/arm64/boot/dts/mediatek/mt8196-pinfunc.h for this SoC. + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + + drive-strength-microamp: + enum: [125, 250, 500, 1000] + + bias-pull-down: + oneOf: + - type: boolean + - enum: [75000, 5000] + description: Pull down RSEL type resistance values (in ohms) + description: + For normal pull down type there is no need to specify a resistance + value, hence this can be specified as a boolean property. + For RSEL pull down type a resistance value (in ohms) can be added. + + bias-pull-up: + oneOf: + - type: boolean + - enum: [10000, 5000, 4000, 3000] + description: Pull up RSEL type resistance values (in ohms) + description: + For normal pull up type there is no need to specify a resistance + value, hence this can be specified as a boolean property. + For RSEL pull up type a resistance value (in ohms) can be added. + + bias-disable: true + + output-high: true + + output-low: true + + input-enable: true + + input-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + required: + - pinmux + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include + #include + #define PINMUX_GPIO0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0) + #define PINMUX_GPIO99__FUNC_SCL0 (MTK_PIN_NO(99) | 1) + #define PINMUX_GPIO100__FUNC_SDA0 (MTK_PIN_NO(100) | 1) + + pio: pinctrl@10005000 { + compatible = "mediatek,mt6878-pinctrl"; + reg = <0x10005000 0x1000>, + <0x11d10000 0x1000>, + <0x11d30000 0x1000>, + <0x11d40000 0x1000>, + <0x11d50000 0x1000>, + <0x11d60000 0x1000>, + <0x11e20000 0x1000>, + <0x11e30000 0x1000>, + <0x11eb0000 0x1000>, + <0x11ec0000 0x1000>, + <0x11ce0000 0x1000>, + <0x11de0000 0x1000>, + <0x11e60000 0x1000>, + <0x1c01e000 0x1000>; + reg-names = "base", "bl", "bm", "br", "bl1", "br1", + "lm", "lt", "rm", "rt", "eint-e", "eint-s", + "eint-w", "eint-c"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 220>; + interrupt-controller; + interrupts = ; + #interrupt-cells = <2>; + + gpio-pins { + pins { + pinmux = ; + bias-pull-up = <4000>; + drive-strength = <6>; + }; + }; + + i2c0-pins { + pins-bus { + pinmux = , + ; + bias-pull-down = <75000>; + drive-strength-microamp = <1000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7988-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7988-pinctrl.yaml index 26dfe7e7735a97..1f31b520cb439b 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7988-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7988-pinctrl.yaml @@ -61,6 +61,11 @@ required: - "#gpio-cells" patternProperties: + "-hog(-[0-9]+)?$": + type: object + required: + - gpio-hog + '-pins$': type: object additionalProperties: false diff --git a/Documentation/devicetree/bindings/pinctrl/microchip,mpfs-pinctrl-iomux0.yaml b/Documentation/devicetree/bindings/pinctrl/microchip,mpfs-pinctrl-iomux0.yaml new file mode 100644 index 00000000000000..3c98eb35fb821f --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/microchip,mpfs-pinctrl-iomux0.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/microchip,mpfs-pinctrl-iomux0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PolarFire SoC iomux0 + +maintainers: + - Conor Dooley + +description: + iomux0 is responsible for routing some functions to either the FPGA fabric, + or to MSSIOs. It only performs muxing, and has no IO configuration role, as + fabric IOs are configured separately and just routing a function to MSSIOs is + not sufficient for it to actually get mapped to an MSSIO, just makes it + possible. + +properties: + compatible: + oneOf: + - const: microchip,mpfs-pinctrl-iomux0 + - items: + - const: microchip,pic64gx-pinctrl-iomux0 + - const: microchip,mpfs-pinctrl-iomux0 + + reg: + maxItems: 1 + + pinctrl-use-default: true + +patternProperties: + '^mux-': + type: object + $ref: pinmux-node.yaml + additionalProperties: false + + properties: + function: + description: + A string containing the name of the function to mux to the group. + enum: [ spi0, spi1, i2c0, i2c1, can0, can1, qspi, uart0, uart1, uart2, + uart3, uart4, mdio0, mdio1 ] + + groups: + description: + An array of strings. Each string contains the name of a group. + items: + enum: [ spi0_fabric, spi0_mssio, spi1_fabric, spi1_mssio, i2c0_fabric, + i2c0_mssio, i2c1_fabric, i2c1_mssio, can0_fabric, can0_mssio, + can1_fabric, can1_mssio, qspi_fabric, qspi_mssio, + uart0_fabric, uart0_mssio, uart1_fabric, uart1_mssio, + uart2_fabric, uart2_mssio, uart3_fabric, uart3_mssio, + uart4_fabric, uart4_mssio, mdio0_fabric, mdio0_mssio, + mdio1_fabric, mdio1_mssio ] + + required: + - function + - groups + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + soc { + #size-cells = <1>; + #address-cells = <1>; + + pinctrl@200 { + compatible = "microchip,mpfs-pinctrl-iomux0"; + reg = <0x200 0x4>; + + mux-spi0-fabric { + function = "spi0"; + groups = "spi0_fabric"; + }; + + mux-spi1-mssio { + function = "spi1"; + groups = "spi1_mssio"; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/pinctrl/microchip,pic64gx-pinctrl-gpio2.yaml b/Documentation/devicetree/bindings/pinctrl/microchip,pic64gx-pinctrl-gpio2.yaml new file mode 100644 index 00000000000000..e3792679de587d --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/microchip,pic64gx-pinctrl-gpio2.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/microchip,pic64gx-pinctrl-gpio2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PIC64GX GPIO2 Mux + +maintainers: + - Conor Dooley + +description: + The "GPIO2 Mux" determines whether GPIO2 or select other functions are + available on package pins on PIC64GX. Some of these functions must be + mapped to this mux via iomux0 for settings here to have any impact. + +properties: + compatible: + const: microchip,pic64gx-pinctrl-gpio2 + + reg: + maxItems: 1 + + pinctrl-use-default: true + +patternProperties: + '^mux-': + type: object + $ref: pinmux-node.yaml + additionalProperties: false + + properties: + function: + description: + A string containing the name of the function to mux to the group. + enum: [ mdio0, mdio1, spi0, can0, pcie, qspi, uart3, uart4, can1, uart2, gpio ] + + groups: + description: + An array of strings. Each string contains the name of a group. + items: + enum: [ mdio0, mdio1, spi0, can0, pcie, qspi, uart3, uart4, can1, uart2, + gpio_mdio0, gpio_mdio1, gpio_spi0, gpio_can0, gpio_pcie, + gpio_qspi, gpio_uart3, gpio_uart4, gpio_can1, gpio_uart2 ] + + required: + - function + - groups + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pinctrl@41000000 { + compatible = "microchip,pic64gx-pinctrl-gpio2"; + reg = <0x41000000 0x4>; + pinctrl-use-default; + pinctrl-names = "default"; + pinctrl-0 = <&mdio0_gpio2>, <&mdio1_gpio2>, <&spi0_gpio2>, <&qspi_gpio2>, + <&uart3_gpio2>, <&uart4_gpio2>, <&can1_gpio2>, <&can0_gpio2>, + <&uart2_gpio2>; + + mux-gpio2 { + function = "gpio"; + groups = "gpio_mdio1", "gpio_spi0", "gpio_can0", "gpio_pcie", + "gpio_qspi", "gpio_uart3", "gpio_uart4", "gpio_can1"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml index 0df4e114fdd69d..fa47732d7cef80 100644 --- a/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml +++ b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml @@ -18,7 +18,7 @@ description: | properties: $nodename: - pattern: "^gpio@[0-9a-f]+$" + pattern: '^gpio@[0-9a-f]+$' compatible: enum: @@ -26,10 +26,10 @@ properties: - mscc,ocelot-sgpio - mscc,luton-sgpio - "#address-cells": + '#address-cells': const: 1 - "#size-cells": + '#size-cells': const: 0 reg: @@ -76,7 +76,7 @@ properties: - const: switch patternProperties: - "^gpio@[0-1]$": + '^gpio@[0-1]$': type: object properties: compatible: @@ -132,8 +132,8 @@ required: - reg - clocks - microchip,sgpio-port-ranges - - "#address-cells" - - "#size-cells" + - '#address-cells' + - '#size-cells' examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml index cbfcf215e571d9..a916d0fc79a992 100644 --- a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Generic Pin Configuration Node maintainers: - - Linus Walleij + - Linus Walleij description: Many data items that are represented in a pin configuration node are common @@ -153,4 +153,21 @@ properties: pin. Typically indicates how many double-inverters are used to delay the signal. + skew-delay-input-ps: + description: + this affects the expected clock skew in ps on an input pin. + + skew-delay-output-ps: + description: + this affects the expected delay in ps before latching a value to + an output pin. + +if: + required: + - skew-delay +then: + properties: + skew-delay-input-ps: false + skew-delay-output-ps: false + additionalProperties: true diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml index f83dbf32ad1838..9135788cf62ec4 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml @@ -24,6 +24,7 @@ properties: - items: - enum: - ti,am437-padconf + - ti,am62l-padconf - ti,am654-padconf - ti,dra7-padconf - ti,omap2420-padconf diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl.yaml index d471563119a98e..290438826c507e 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Pin controller device maintainers: - - Linus Walleij + - Linus Walleij - Rafał Miłecki description: | diff --git a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml index ca9d246d46fe4f..7ba26271c4d65f 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Generic Pin Multiplexing Node maintainers: - - Linus Walleij + - Linus Walleij description: | The contents of the pin configuration child nodes are defined by the binding diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml index 23300606547c55..96635b2f6a279e 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml @@ -8,7 +8,7 @@ title: Qualcomm IPQ5018 TLMM pin controller maintainers: - Bjorn Andersson - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: Top Level Mode Multiplexer pin controller in Qualcomm IPQ5018 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml index e571cd64418f27..22685c4799838a 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml @@ -8,7 +8,7 @@ title: Qualcomm IPQ5332 TLMM pin controller maintainers: - Bjorn Andersson - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: | Top Level Mode Multiplexer pin controller in Qualcomm IPQ5332 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml index 6f90dbbdbdcce2..40def3ac3bf711 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml @@ -8,7 +8,7 @@ title: Qualcomm IPQ8074 TLMM pin controller maintainers: - Bjorn Andersson - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: Top Level Mode Multiplexer pin controller in Qualcomm IPQ8074 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml index bca903b5da6d01..7afec315b63ef7 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml @@ -8,7 +8,7 @@ title: Qualcomm Technologies, Inc. IPQ9574 TLMM block maintainers: - Bjorn Andersson - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: Top Level Mode Multiplexer pin controller in Qualcomm IPQ9574 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,kaanapali-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,kaanapali-tlmm.yaml new file mode 100644 index 00000000000000..53534a07a1f0e2 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,kaanapali-tlmm.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,kaanapali-tlmm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. Kaanapali TLMM block + +maintainers: + - Jingyi Wang + +description: + Top Level Mode Multiplexer pin controller in Qualcomm Kaanapali SoC. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,kaanapali-tlmm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: + minItems: 1 + maxItems: 109 + + gpio-line-names: + maxItems: 217 + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-kaanapali-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-kaanapali-tlmm-state" + additionalProperties: false + +$defs: + qcom-kaanapali-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9]|21[0-6])$" + - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + enum: [ gpio, aoss_cti, atest_char, atest_usb, audio_ext_mclk0, + audio_ext_mclk1, audio_ref_clk, cam_asc_mclk2, cam_asc_mclk4, + cam_mclk, cci_async_in, cci_i2c_scl, cci_i2c_sda, cci_timer, + cmu_rng, coex_uart1_rx, coex_uart1_tx, coex_uart2_rx, + coex_uart2_tx, dbg_out_clk, ddr_bist_complete, ddr_bist_fail, + ddr_bist_start, ddr_bist_stop, ddr_pxi0, ddr_pxi1, ddr_pxi2, + ddr_pxi3, dp_hot, egpio, gcc_gp1, gcc_gp2, gcc_gp3, gnss_adc0, + gnss_adc1, i2chub0_se0, i2chub0_se1, i2chub0_se2, i2chub0_se3, + i2chub0_se4, i2s0_data0, i2s0_data1, i2s0_sck, i2s0_ws, + i2s1_data0, i2s1_data1, i2s1_sck, i2s1_ws, ibi_i3c, jitter_bist, + mdp_esync0_out, mdp_esync1_out, mdp_vsync, mdp_vsync0_out, + mdp_vsync1_out, mdp_vsync2_out, mdp_vsync3_out, mdp_vsync5_out, + mdp_vsync_e, nav_gpio0, nav_gpio1, nav_gpio2, nav_gpio3, + pcie0_clk_req_n, phase_flag, pll_bist_sync, pll_clk_aux, + prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti, + qdss_gpio_traceclk, qdss_gpio_tracectl, qdss_gpio_tracedata, + qlink_big_enable, qlink_big_request, qlink_little_enable, + qlink_little_request, qlink_wmss, qspi0, qspi1, qspi2, qspi3, + qspi_clk, qspi_cs, qup1_se0, qup1_se1, qup1_se2, qup1_se3, + qup1_se4, qup1_se5, qup1_se6, qup1_se7, qup2_se0, qup2_se1, + qup2_se2, qup2_se3, qup2_se4, qup3_se0, qup3_se1, qup3_se2, + qup3_se3, qup3_se4, qup3_se5, qup4_se0, qup4_se1, qup4_se2, + qup4_se3, qup4_se4, sd_write_protect, sdc40, sdc41, sdc42, sdc43, + sdc4_clk, sdc4_cmd, sys_throttle, tb_trig_sdc2, tb_trig_sdc4, + tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3, tsense_pwm1, + tsense_pwm2, tsense_pwm3, tsense_pwm4, tsense_pwm5, tsense_pwm6, + tsense_pwm7, uim0_clk, uim0_data, uim0_present, uim0_reset, uim1_clk, + uim1_data, uim1_present, uim1_reset, usb0_hs, usb_phy, vfr_0, vfr_1, + vsense_trigger_mirnat, wcn_sw, wcn_sw_ctrl ] + + required: + - pins + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include + + tlmm: pinctrl@f100000 { + compatible = "qcom,kaanapali-tlmm"; + reg = <0x0f100000 0x300000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 218>; + interrupt-controller; + #interrupt-cells = <2>; + + qup-uart7-state { + pins = "gpio62", "gpio63"; + function = "qup1_se7"; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-common.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-common.yaml index 3b5045730471fd..619341dd637c3f 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-common.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-common.yaml @@ -9,7 +9,7 @@ title: Qualcomm SoC LPASS LPI TLMM Common Properties maintainers: - Bjorn Andersson - Srinivas Kandagatla - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: Common properties for the Top Level Mode Multiplexer pin controllers in the diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml index 61f5be21f30cc0..203ad69e99e853 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml @@ -8,7 +8,7 @@ title: Qualcomm MSM8660 TLMM pin controller maintainers: - Bjorn Andersson - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: Top Level Mode Multiplexer pin controller in Qualcomm MSM8660 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml index 904af87f9eaff6..9bf098cf18eedb 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml @@ -8,7 +8,7 @@ title: Qualcomm MSM8916 TLMM pin controller maintainers: - Bjorn Andersson - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: Top Level Mode Multiplexer pin controller in Qualcomm MSM8916 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml index 46618740bd312b..7301318094c786 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml @@ -8,7 +8,7 @@ title: Qualcomm MSM8960 TLMM pin controller maintainers: - Bjorn Andersson - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: Top Level Mode Multiplexer pin controller in Qualcomm MSM8960 SoC. @@ -107,12 +107,12 @@ examples: - | #include - msmgpio: pinctrl@800000 { + tlmm: pinctrl@800000 { compatible = "qcom,msm8960-pinctrl"; reg = <0x800000 0x4000>; #gpio-cells = <2>; gpio-controller; - gpio-ranges = <&msmgpio 0 0 152>; + gpio-ranges = <&tlmm 0 0 152>; interrupts = ; interrupt-controller; #interrupt-cells = <2>; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml index 840fdaabde1277..a9aff442824cf6 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml @@ -8,7 +8,7 @@ title: Qualcomm MSM8974 TLMM pin controller maintainers: - Bjorn Andersson - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: Top Level Mode Multiplexer pin controller in Qualcomm MSM8974 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml index d4391c194ff7c6..501329bff905d2 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml @@ -8,7 +8,7 @@ title: Qualcomm MSM8976 TLMM pin controller maintainers: - Bjorn Andersson - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: Top Level Mode Multiplexer pin controller in Qualcomm MSM8976 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml index fa90981db40b38..2ec10908d556e5 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml @@ -8,7 +8,7 @@ title: Qualcomm MSM8994 TLMM pin controller maintainers: - Bjorn Andersson - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: Top Level Mode Multiplexer pin controller in Qualcomm MSM8994 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml index c5010c175b2386..496f38009c7d1f 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml @@ -8,7 +8,7 @@ title: Qualcomm MSM8996 TLMM pin controller maintainers: - Bjorn Andersson - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: Top Level Mode Multiplexer pin controller in Qualcomm MSM8996 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml index bcaa231adaf784..3b098a226a67b8 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml @@ -8,7 +8,7 @@ title: Qualcomm MSM8998 TLMM pin controller maintainers: - Bjorn Andersson - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: Top Level Mode Multiplexer pin controller in Qualcomm MSM8998 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml index 5e6dfcc3fe9b3c..386c31e9c52b89 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml @@ -59,7 +59,11 @@ properties: - qcom,pmc8180-gpio - qcom,pmc8180c-gpio - qcom,pmc8380-gpio + - qcom,pmcx0102-gpio - qcom,pmd8028-gpio + - qcom,pmh0101-gpio + - qcom,pmh0104-gpio + - qcom,pmh0110-gpio - qcom,pmi632-gpio - qcom,pmi8950-gpio - qcom,pmi8994-gpio @@ -68,6 +72,7 @@ properties: - qcom,pmiv0104-gpio - qcom,pmk8350-gpio - qcom,pmk8550-gpio + - qcom,pmk8850-gpio - qcom,pmm8155au-gpio - qcom,pmm8654au-gpio - qcom,pmp8074-gpio @@ -191,6 +196,8 @@ allOf: - qcom,pm8950-gpio - qcom,pm8953-gpio - qcom,pmi632-gpio + - qcom,pmh0104-gpio + - qcom,pmk8850-gpio then: properties: gpio-line-names: @@ -303,6 +310,8 @@ allOf: compatible: contains: enum: + - qcom,pmcx0102-gpio + - qcom,pmh0110-gpio - qcom,pmi8998-gpio then: properties: @@ -318,6 +327,7 @@ allOf: compatible: contains: enum: + - qcom,pmh0101-gpio - qcom,pmih0108-gpio then: properties: @@ -424,13 +434,13 @@ allOf: patternProperties: '-state$': oneOf: - - $ref: "#/$defs/qcom-pmic-gpio-state" + - $ref: '#/$defs/qcom-pmic-gpio-state' - patternProperties: - "(pinconf|-pins)$": - $ref: "#/$defs/qcom-pmic-gpio-state" + '(pinconf|-pins)$': + $ref: '#/$defs/qcom-pmic-gpio-state' additionalProperties: false - "-hog(-[0-9]+)?$": + '-hog(-[0-9]+)?$': type: object required: - gpio-hog @@ -481,13 +491,18 @@ $defs: - gpio1-gpio22 for pm8994 - gpio1-gpio26 for pm8998 - gpio1-gpio22 for pma8084 + - gpio1-gpio14 for pmcx0102 - gpio1-gpio4 for pmd8028 + - gpio1-gpio18 for pmh0101 + - gpio1-gpio8 for pmh0104 + - gpio1-gpio14 for pmh0110 - gpio1-gpio8 for pmi632 - gpio1-gpio2 for pmi8950 - gpio1-gpio10 for pmi8994 - gpio1-gpio18 for pmih0108 - gpio1-gpio4 for pmk8350 - gpio1-gpio6 for pmk8550 + - gpio1-gpio8 for pmk8850 - gpio1-gpio10 for pmm8155au - gpio1-gpio12 for pmm8654au - gpio1-gpio12 for pmp8074 (holes on gpio1 and gpio12) @@ -503,7 +518,7 @@ $defs: - gpio1-gpio12 for pmxr2230 items: - pattern: "^gpio([0-9]+)$" + pattern: '^gpio([0-9]+)$' function: items: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml index 9364ae05f3e68f..daf4c1c03712ca 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml @@ -74,10 +74,10 @@ required: patternProperties: '-state$': oneOf: - - $ref: "#/$defs/qcom-pmic-mpp-state" + - $ref: '#/$defs/qcom-pmic-mpp-state' - patternProperties: '-pins$': - $ref: "#/$defs/qcom-pmic-mpp-state" + $ref: '#/$defs/qcom-pmic-mpp-state' additionalProperties: false $defs: @@ -100,7 +100,7 @@ $defs: - mpp1-mpp4 for pma8084 items: - pattern: "^mpp([0-9]+)$" + pattern: '^mpp([0-9]+)$' function: items: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml index 4009501b3414f4..91b8dcec3f0828 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml @@ -8,7 +8,7 @@ title: Qualcomm QCS404 TLMM pin controller maintainers: - Bjorn Andersson - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: Top Level Mode Multiplexer pin controller in Qualcomm QCS404 SoC. @@ -142,7 +142,6 @@ examples: interrupt-controller; #interrupt-cells = <2>; - blsp1-i2c1-default-state { pins = "gpio24", "gpio25"; function = "blsp_i2c1"; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml index 5606f2136ad101..ec0bf4fdfa4f1c 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml @@ -8,7 +8,7 @@ title: Qualcomm SC7180 TLMM pin controller maintainers: - Bjorn Andersson - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: Top Level Mode Multiplexer pin controller in Qualcomm SC7180 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml index a00cb43df144b5..80627a1ad663c6 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml @@ -8,7 +8,7 @@ title: Qualcomm SDM630 and SDM660 TLMM pin controller maintainers: - Bjorn Andersson - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: Top Level Mode Multiplexer pin controller in Qualcomm SDM630 and SDM660 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml index 0f331844608c69..4fcac2e55b5542 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml @@ -8,7 +8,7 @@ title: Qualcomm SDM845 TLMM pin controller maintainers: - Bjorn Andersson - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: Top Level Mode Multiplexer pin controller in Qualcomm SDM845 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml index f4cf2ce86fcd42..d2a036ead846fa 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml @@ -16,7 +16,13 @@ description: properties: compatible: - const: qcom,sm6115-lpass-lpi-pinctrl + oneOf: + - enum: + - qcom,sm6115-lpass-lpi-pinctrl + - items: + - enum: + - qcom,qcm2290-lpass-lpi-pinctrl + - const: qcom,sm6115-lpass-lpi-pinctrl reg: items: @@ -66,7 +72,6 @@ $defs: Specify the alternative function to be configured for the specified pins. - allOf: - $ref: qcom,lpass-lpi-common.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml index ddeaeaa9a450ab..5a57a59cc1e579 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml @@ -88,7 +88,6 @@ $defs: uim2_present, uim2_reset, unused1, unused2, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data ] - required: - pins diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml index bdb7ed4be02675..c4542e2d710835 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml @@ -8,7 +8,7 @@ title: Qualcomm SM8150 TLMM pin controller maintainers: - Bjorn Andersson - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: Top Level Mode Multiplexer pin controller in Qualcomm SM8150 SoC. diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml index 9d782f910b318c..46aec0713775e8 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm SM8350 SoC LPASS LPI TLMM maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski - Srinivas Kandagatla description: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml index bf4a72facae1d5..89821871c60624 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm SM8550 SoC LPASS LPI TLMM maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski - Srinivas Kandagatla description: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml index e90a5274647dfd..74df912e60ade8 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8650-lpass-lpi-pinctrl.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm SM8650 SoC LPASS LPI TLMM maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski - Srinivas Kandagatla description: diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml index cfe00457336612..075f3abdfbec46 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml @@ -129,7 +129,7 @@ additionalProperties: - type: object additionalProperties: - $ref: "#/additionalProperties/anyOf/0" + $ref: '#/additionalProperties/anyOf/0' examples: - | diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml index 2bd7d47d0fdb97..8203c3c46cc7b8 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml @@ -65,7 +65,6 @@ patternProperties: - '#gpio-cells' - gpio-ranges - additionalProperties: anyOf: - type: object @@ -118,7 +117,7 @@ additionalProperties: - type: object additionalProperties: - $ref: "#/additionalProperties/anyOf/0" + $ref: '#/additionalProperties/anyOf/0' examples: - | @@ -150,7 +149,6 @@ examples: pinmux = , ; }; - /* * I2c master: both SDA and SCL pins need bi-directional operations * Pin #4 on port #1 is configured as alternate function #1. @@ -162,7 +160,6 @@ examples: pinmux = , ; }; - /* * Multi-function timer input and output compare pins. */ diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml index 5156d54b240b1e..00c05243b9a473 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml @@ -135,7 +135,7 @@ additionalProperties: - type: object additionalProperties: - $ref: "#/additionalProperties/anyOf/0" + $ref: '#/additionalProperties/anyOf/0' allOf: - $ref: pinctrl.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml index 5fa5d31f8866ba..88b2fa5e684d8b 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml @@ -88,7 +88,7 @@ additionalProperties: - type: object additionalProperties: - $ref: "#/additionalProperties/anyOf/0" + $ref: '#/additionalProperties/anyOf/0' allOf: - $ref: pinctrl.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml index 125af766b99297..76e6072817160d 100644 --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml @@ -44,6 +44,7 @@ properties: - rockchip,rk3328-pinctrl - rockchip,rk3368-pinctrl - rockchip,rk3399-pinctrl + - rockchip,rk3506-pinctrl - rockchip,rk3528-pinctrl - rockchip,rk3562-pinctrl - rockchip,rk3568-pinctrl diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml index dd11c73a55da3f..f3c433015b125e 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml +++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml @@ -41,6 +41,7 @@ properties: - samsung,exynos7870-wakeup-eint - samsung,exynos7885-wakeup-eint - samsung,exynos850-wakeup-eint + - samsung,exynos8890-wakeup-eint - samsung,exynos8895-wakeup-eint - const: samsung,exynos7-wakeup-eint - items: diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml index f1094d65e84603..ddc5e2efff21fa 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml @@ -36,6 +36,7 @@ properties: compatible: enum: - axis,artpec8-pinctrl + - axis,artpec9-pinctrl - google,gs101-pinctrl - samsung,s3c64xx-pinctrl - samsung,s5pv210-pinctrl @@ -52,6 +53,7 @@ properties: - samsung,exynos7870-pinctrl - samsung,exynos7885-pinctrl - samsung,exynos850-pinctrl + - samsung,exynos8890-pinctrl - samsung,exynos8895-pinctrl - samsung,exynos9810-pinctrl - samsung,exynos990-pinctrl @@ -133,7 +135,9 @@ allOf: properties: compatible: contains: - const: google,gs101-pinctrl + enum: + - google,gs101-pinctrl + - samsung,exynos8890-pinctrl then: required: - clocks diff --git a/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt deleted file mode 100644 index 779b8ef0f6e665..00000000000000 --- a/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt +++ /dev/null @@ -1,83 +0,0 @@ -* Spreadtrum Pin Controller - -The Spreadtrum pin controller are organized in 3 blocks (types). - -The first block comprises some global control registers, and each -register contains several bit fields with one bit or several bits -to configure for some global common configuration, such as domain -pad driving level, system control select and so on ("domain pad -driving level": One pin can output 3.0v or 1.8v, depending on the -related domain pad driving selection, if the related domain pad -select 3.0v, then the pin can output 3.0v. "system control" is used -to choose one function (like: UART0) for which system, since we -have several systems (AP/CP/CM4) on one SoC.). - -There are too much various configuration that we can not list all -of them, so we can not make every Spreadtrum-special configuration -as one generic configuration, and maybe it will add more strange -global configuration in future. Then we add one "sprd,control" to -set these various global control configuration, and we need use -magic number for this property. - -Moreover we recognise every fields comprising one bit or several -bits in one global control register as one pin, thus we should -record every pin's bit offset, bit width and register offset to -configure this field (pin). - -The second block comprises some common registers which have unified -register definition, and each register described one pin is used -to configure the pin sleep mode, function select and sleep related -configuration. - -Now we have 4 systems for sleep mode on SC9860 SoC: AP system, -PUBCP system, TGLDSP system and AGDSP system. And the pin sleep -related configuration are: -- input-enable -- input-disable -- output-high -- output-low -- bias-pull-up -- bias-pull-down - -In some situation we need set the pin sleep mode and pin sleep related -configuration, to set the pin sleep related configuration automatically -by hardware when the system specified by sleep mode goes into deep -sleep mode. For example, if we set the pin sleep mode as PUBCP_SLEEP -and set the pin sleep related configuration as "input-enable", which -means when PUBCP system goes into deep sleep mode, this pin will be set -input enable automatically. - -Moreover we can not use the "sleep" state, since some systems (like: -PUBCP system) do not run linux kernel OS (only AP system run linux -kernel on SC9860 platform), then we can not select "sleep" state -when the PUBCP system goes into deep sleep mode. Thus we introduce -"sprd,sleep-mode" property to set pin sleep mode. - -The last block comprises some misc registers which also have unified -register definition, and each register described one pin is used to -configure drive strength, pull up/down and so on. Especially for pull -up, we have two kind pull up resistor: 20K and 4.7K. - -Required properties for Spreadtrum pin controller: -- compatible: "sprd,-pinctrl" - Please refer to each sprd,-pinctrl.txt binding doc for supported SoCs. -- reg: The register address of pin controller device. -- pins : An array of pin names. - -Optional properties: -- function: Specified the function name. -- drive-strength: Drive strength in mA. -- input-schmitt-disable: Enable schmitt-trigger mode. -- input-schmitt-enable: Disable schmitt-trigger mode. -- bias-disable: Disable pin bias. -- bias-pull-down: Pull down on pin. -- bias-pull-up: Pull up on pin. -- input-enable: Enable pin input. -- input-disable: Enable pin output. -- output-high: Set the pin as an output level high. -- output-low: Set the pin as an output level low. -- sleep-hardware-state: Indicate these configs in this state are sleep related. -- sprd,control: Control values referring to databook for global control pins. -- sprd,sleep-mode: Sleep mode selection. - -Please refer to each sprd,-pinctrl.txt binding doc for supported values. diff --git a/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt deleted file mode 100644 index 5a628333d52f24..00000000000000 --- a/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt +++ /dev/null @@ -1,70 +0,0 @@ -* Spreadtrum SC9860 Pin Controller - -Please refer to sprd,pinctrl.txt in this directory for common binding part -and usage. - -Required properties: -- compatible: Must be "sprd,sc9860-pinctrl". -- reg: The register address of pin controller device. -- pins : An array of strings, each string containing the name of a pin. - -Optional properties: -- function: A string containing the name of the function, values must be - one of: "func1", "func2", "func3" and "func4". -- drive-strength: Drive strength in mA. Supported values: 2, 4, 6, 8, 10, - 12, 14, 16, 20, 21, 24, 25, 27, 29, 31 and 33. -- input-schmitt-disable: Enable schmitt-trigger mode. -- input-schmitt-enable: Disable schmitt-trigger mode. -- bias-disable: Disable pin bias. -- bias-pull-down: Pull down on pin. -- bias-pull-up: Pull up on pin. Supported values: 20000 for pull-up resistor - is 20K and 4700 for pull-up resistor is 4.7K. -- input-enable: Enable pin input. -- input-disable: Enable pin output. -- output-high: Set the pin as an output level high. -- output-low: Set the pin as an output level low. -- sleep-hardware-state: Indicate these configs in this state are sleep related. -- sprd,control: Control values referring to databook for global control pins. -- sprd,sleep-mode: Choose the pin sleep mode, and supported values are: - AP_SLEEP, PUBCP_SLEEP, TGLDSP_SLEEP and AGDSP_SLEEP. - -Pin sleep mode definition: -enum pin_sleep_mode { - AP_SLEEP = BIT(0), - PUBCP_SLEEP = BIT(1), - TGLDSP_SLEEP = BIT(2), - AGDSP_SLEEP = BIT(3), -}; - -Example: -pin_controller: pinctrl@402a0000 { - compatible = "sprd,sc9860-pinctrl"; - reg = <0x402a0000 0x10000>; - - grp1: sd0 { - pins = "SC9860_VIO_SD2_IRTE", "SC9860_VIO_SD0_IRTE"; - sprd,control = <0x1>; - }; - - grp2: rfctl_33 { - pins = "SC9860_RFCTL33"; - function = "func2"; - sprd,sleep-mode = ; - grp2_sleep_mode: rfctl_33_sleep { - pins = "SC9860_RFCTL33"; - sleep-hardware-state; - output-low; - } - }; - - grp3: rfctl_misc_20 { - pins = "SC9860_RFCTL20_MISC"; - drive-strength = <10>; - bias-pull-up = <4700>; - grp3_sleep_mode: rfctl_misc_sleep { - pins = "SC9860_RFCTL20_MISC"; - sleep-hardware-state; - bias-pull-up; - } - }; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.yaml new file mode 100644 index 00000000000000..59d23eb8aa973d --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.yaml @@ -0,0 +1,199 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/sprd,sc9860-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Spreadtrum SC9860 Pin Controller + +maintainers: + - Baolin Wang + +description: > + The Spreadtrum pin controller are organized in 3 blocks (types). + + The first block comprises some global control registers, and each + register contains several bit fields with one bit or several bits + to configure for some global common configuration, such as domain + pad driving level, system control select and so on ("domain pad + driving level": One pin can output 3.0v or 1.8v, depending on the + related domain pad driving selection, if the related domain pad + select 3.0v, then the pin can output 3.0v. "system control" is used + to choose one function (like: UART0) for which system, since we + have several systems (AP/CP/CM4) on one SoC.). + + There are too much various configuration that we can not list all + of them, so we can not make every Spreadtrum-special configuration + as one generic configuration, and maybe it will add more strange + global configuration in future. Then we add one "sprd,control" to + set these various global control configuration, and we need use + magic number for this property. + + Moreover we recognize every fields comprising one bit or several + bits in one global control register as one pin, thus we should + record every pin's bit offset, bit width and register offset to + configure this field (pin). + + The second block comprises some common registers which have unified + register definition, and each register described one pin is used + to configure the pin sleep mode, function select and sleep related + configuration. + + Now we have 4 systems for sleep mode on SC9860 SoC: AP system, + PUBCP system, TGLDSP system and AGDSP system. And the pin sleep + related configuration are: + - input-enable + - input-disable + - output-high + - output-low + - bias-pull-up + - bias-pull-down + + In some situation we need set the pin sleep mode and pin sleep related + configuration, to set the pin sleep related configuration automatically + by hardware when the system specified by sleep mode goes into deep + sleep mode. For example, if we set the pin sleep mode as PUBCP_SLEEP + and set the pin sleep related configuration as "input-enable", which + means when PUBCP system goes into deep sleep mode, this pin will be set + input enable automatically. + + Moreover we can not use the "sleep" state, since some systems (like: + PUBCP system) do not run linux kernel OS (only AP system run linux + kernel on SC9860 platform), then we can not select "sleep" state + when the PUBCP system goes into deep sleep mode. Thus we introduce + "sprd,sleep-mode" property to set pin sleep mode. + + The last block comprises some misc registers which also have unified + register definition, and each register described one pin is used to + configure drive strength, pull up/down and so on. Especially for pull + up, we have two kind pull up resistor: 20K and 4.7K. + +properties: + compatible: + const: sprd,sc9860-pinctrl + + reg: + maxItems: 1 + +additionalProperties: + $ref: '#/$defs/pin-node' + unevaluatedProperties: false + + properties: + function: + description: Function to assign to the pins. + enum: + - func1 + - func2 + - func3 + - func4 + + drive-strength: + description: Drive strength in mA. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 4, 6, 8, 10, 12, 14, 16, 20, 21, 24, 25, 27, 29, 31, 33] + + input-schmitt-disable: true + + input-schmitt-enable: true + + bias-pull-up: + enum: [20000, 4700] + + sprd,sleep-mode: + description: Pin sleep mode selection. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 0x1f + + sprd,control: + description: Control values referring to databook for global control pins. + $ref: /schemas/types.yaml#/definitions/uint32 + + patternProperties: + 'sleep$': + $ref: '#/$defs/pin-node' + unevaluatedProperties: false + + properties: + bias-pull-up: + type: boolean + + sleep-hardware-state: + description: Indicate these configs in sleep related state. + type: boolean + +$defs: + pin-node: + type: object + allOf: + - $ref: /schemas/pinctrl/pincfg-node.yaml# + - $ref: /schemas/pinctrl/pinmux-node.yaml# + + properties: + pins: + description: Names of pins to configure. + $ref: /schemas/types.yaml#/definitions/string-array + + bias-disable: + description: Disable pin bias. + type: boolean + + bias-pull-down: + description: Pull down on pin. + type: boolean + + bias-pull-up: true + + input-enable: + description: Enable pin input. + type: boolean + + input-disable: + description: Enable pin output. + type: boolean + + output-high: + description: Set the pin as an output level high. + type: boolean + + output-low: + description: Set the pin as an output level low. + type: boolean + +required: + - compatible + - reg + +examples: + - | + pin_controller: pinctrl@402a0000 { + compatible = "sprd,sc9860-pinctrl"; + reg = <0x402a0000 0x10000>; + + grp1: sd0 { + pins = "SC9860_VIO_SD2_IRTE", "SC9860_VIO_SD0_IRTE"; + sprd,control = <0x1>; + }; + + grp2: rfctl_33 { + pins = "SC9860_RFCTL33"; + function = "func2"; + sprd,sleep-mode = <3>; + grp2_sleep_mode: rfctl_33_sleep { + pins = "SC9860_RFCTL33"; + sleep-hardware-state; + output-low; + }; + }; + + grp3: rfctl_misc_20 { + pins = "SC9860_RFCTL20_MISC"; + drive-strength = <10>; + bias-pull-up = <4700>; + grp3_sleep_mode: rfctl_misc_sleep { + pins = "SC9860_RFCTL20_MISC"; + sleep-hardware-state; + bias-pull-up; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml index 961161c2ab62b0..76d956b4a5372d 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml @@ -151,6 +151,8 @@ patternProperties: pinctrl group available on the machine. Each subnode will list the pins it needs, and how they should be configured, with regard to muxer configuration, pullups, drive, output high/low and output speed. + $ref: /schemas/pinctrl/pincfg-node.yaml + properties: pinmux: $ref: /schemas/types.yaml#/definitions/uint32-array @@ -195,26 +197,19 @@ patternProperties: pinmux = ; }; - bias-disable: - type: boolean + bias-disable: true - bias-pull-down: - type: boolean + bias-pull-down: true - bias-pull-up: - type: boolean + bias-pull-up: true - drive-push-pull: - type: boolean + drive-push-pull: true - drive-open-drain: - type: boolean + drive-open-drain: true - output-low: - type: boolean + output-low: true - output-high: - type: boolean + output-high: true slew-rate: description: | @@ -222,15 +217,68 @@ patternProperties: 1: Medium speed 2: Fast speed 3: High speed - $ref: /schemas/types.yaml#/definitions/uint32 - enum: [0, 1, 2, 3] + minimum: 0 + maximum: 3 + + skew-delay-input-ps: + description: | + IO synchronization skew rate applied to the input path + enum: [0, 300, 500, 750, 1000, 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000, 3250] + + skew-delay-output-ps: + description: | + IO synchronization latch delay applied to the output path + enum: [0, 300, 500, 750, 1000, 1250, 1500, 1750, 2000, 2250, 2500, 2750, 3000, 3250] + + st,io-sync: + $ref: /schemas/types.yaml#/definitions/string + enum: + - pass-through + - clock inverted + - data on rising edge + - data on falling edge + - data on both edges + description: | + IO synchronization through re-sampling or inversion + "pass-through" - data or clock GPIO pass-through + "clock inverted" - clock GPIO inverted + "data on rising edge" - data GPIO re-sampled on clock rising edge + "data on falling edge" - data GPIO re-sampled on clock falling edge + "data on both edges" - data GPIO re-sampled on both clock edges + default: pass-through required: - pinmux + # Not allowed both skew-delay-input-ps and skew-delay-output-ps + if: + required: + - skew-delay-input-ps + then: + properties: + skew-delay-output-ps: false + allOf: - $ref: pinctrl.yaml# + - if: + not: + properties: + compatible: + contains: + enum: + - st,stm32mp257-pinctrl + - st,stm32mp257-z-pinctrl + then: + patternProperties: + '-[0-9]*$': + patternProperties: + '^pins': + properties: + skew-delay-input-ps: false + skew-delay-output-ps: false + st,io-sync: false + required: - compatible - '#address-cells' @@ -311,4 +359,25 @@ examples: pinctrl-names = "default"; }; + - | + #include + //Example 4 skew-delay and st,io-sync + pinctrl: pinctrl@44240000 { + compatible = "st,stm32mp257-pinctrl"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x44240000 0xa0400>; + + eth3_rgmii_pins_a: eth3-rgmii-0 { + pins1 { + pinmux = ; + st,io-sync = "data on both edges"; + }; + pins2 { + pinmux = ; + skew-delay-output-ps = <500>; + }; + }; + }; + ... diff --git a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml index f3258f2fd3a483..3f14eab01c54b0 100644 --- a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml @@ -32,7 +32,6 @@ description: | | | | | | | ------- UART0 UART1 -- - The big MUX in the diagram only has 7 different ways of mapping peripherals on the left to pins on the right. StarFive calls the 7 configurations "signal groups". diff --git a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml index ce04d2eadec9d5..0eff0a0ee9e9d4 100644 --- a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml @@ -42,7 +42,6 @@ patternProperties: function: description: Function to mux. - $ref: /schemas/types.yaml#/definitions/string enum: [i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, i2c6, i2c7, i2c8, spi0, spi1, spi2, spi3, spi4, spi5, spi6, uart0, uart1, uart2, uart3, pwm, pcmif_out, pcmif_in] diff --git a/Documentation/devicetree/bindings/power/actions,owl-sps.txt b/Documentation/devicetree/bindings/power/actions,owl-sps.txt deleted file mode 100644 index a3571937b0195f..00000000000000 --- a/Documentation/devicetree/bindings/power/actions,owl-sps.txt +++ /dev/null @@ -1,21 +0,0 @@ -Actions Semi Owl Smart Power System (SPS) - -Required properties: -- compatible : "actions,s500-sps" for S500 - "actions,s700-sps" for S700 - "actions,s900-sps" for S900 -- reg : Offset and length of the register set for the device. -- #power-domain-cells : Must be 1. - See macros in: - include/dt-bindings/power/owl-s500-powergate.h for S500 - include/dt-bindings/power/owl-s700-powergate.h for S700 - include/dt-bindings/power/owl-s900-powergate.h for S900 - - -Example: - - sps: power-controller@b01b0100 { - compatible = "actions,s500-sps"; - reg = <0xb01b0100 0x100>; - #power-domain-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/power/actions,s500-sps.yaml b/Documentation/devicetree/bindings/power/actions,s500-sps.yaml new file mode 100644 index 00000000000000..bb942817b3dbff --- /dev/null +++ b/Documentation/devicetree/bindings/power/actions,s500-sps.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/actions,s500-sps.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Actions Semi Owl Smart Power System (SPS) + +maintainers: + - Andreas Färber + - Manivannan Sadhasivam + +properties: + compatible: + enum: + - actions,s500-sps + - actions,s700-sps + - actions,s900-sps + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + +required: + - compatible + - reg + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + power-controller@b01b0100 { + compatible = "actions,s500-sps"; + reg = <0xb01b0100 0x100>; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/power/mediatek,mt8196-gpufreq.yaml b/Documentation/devicetree/bindings/power/mediatek,mt8196-gpufreq.yaml new file mode 100644 index 00000000000000..b9e43abaf8a42c --- /dev/null +++ b/Documentation/devicetree/bindings/power/mediatek,mt8196-gpufreq.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/mediatek,mt8196-gpufreq.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MFlexGraphics Power and Frequency Controller + +maintainers: + - Nicolas Frattaroli + +description: + A special-purpose embedded MCU to control power and frequency of GPU devices + using MediaTek Flexible Graphics integration hardware. + +properties: + $nodename: + pattern: '^power-controller@[a-f0-9]+$' + + compatible: + enum: + - mediatek,mt8196-gpufreq + + reg: + items: + - description: GPR memory area + - description: RPC memory area + - description: SoC variant ID register + + reg-names: + items: + - const: gpr + - const: rpc + - const: hw-revision + + clocks: + items: + - description: main clock of the embedded controller (EB) + - description: core PLL + - description: stack 0 PLL + - description: stack 1 PLL + + clock-names: + items: + - const: eb + - const: core + - const: stack0 + - const: stack1 + + mboxes: + items: + - description: FastDVFS events + - description: frequency control + - description: sleep control + - description: timer control + - description: frequency hopping control + - description: hardware voter control + - description: FastDVFS control + + mbox-names: + items: + - const: fast-dvfs-event + - const: gpufreq + - const: sleep + - const: timer + - const: fhctl + - const: ccf + - const: fast-dvfs + + memory-region: + items: + - description: phandle to the GPUEB shared memory + + "#clock-cells": + const: 1 + + "#power-domain-cells": + const: 0 + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - mboxes + - mbox-names + - memory-region + - "#clock-cells" + - "#power-domain-cells" + +additionalProperties: false + +examples: + - | + #include + + power-controller@4b09fd00 { + compatible = "mediatek,mt8196-gpufreq"; + reg = <0x4b09fd00 0x80>, + <0x4b800000 0x1000>, + <0x4b860128 0x4>; + reg-names = "gpr", "rpc", "hw-revision"; + clocks = <&topckgen CLK_TOP_MFG_EB>, + <&mfgpll CLK_MFG_AO_MFGPLL>, + <&mfgpll_sc0 CLK_MFGSC0_AO_MFGPLL_SC0>, + <&mfgpll_sc1 CLK_MFGSC1_AO_MFGPLL_SC1>; + clock-names = "eb", "core", "stack0", "stack1"; + mboxes = <&gpueb_mbox 0>, <&gpueb_mbox 1>, <&gpueb_mbox 2>, + <&gpueb_mbox 3>, <&gpueb_mbox 4>, <&gpueb_mbox 5>, + <&gpueb_mbox 7>; + mbox-names = "fast-dvfs-event", "gpufreq", "sleep", "timer", "fhctl", + "ccf", "fast-dvfs"; + memory-region = <&gpueb_shared_memory>; + #clock-cells = <1>; + #power-domain-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml index 500d98921581a3..f8a13928f615b8 100644 --- a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml +++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml @@ -33,6 +33,9 @@ properties: - mediatek,mt8188-power-controller - mediatek,mt8192-power-controller - mediatek,mt8195-power-controller + - mediatek,mt8196-hwv-hfrp-power-controller + - mediatek,mt8196-hwv-scp-power-controller + - mediatek,mt8196-power-controller - mediatek,mt8365-power-controller '#power-domain-cells': @@ -157,6 +160,7 @@ allOf: contains: enum: - mediatek,mt8183-power-controller + - mediatek,mt8196-power-controller then: properties: access-controllers: diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml index af5fef872529b1..27af5b8aa13402 100644 --- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml +++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml @@ -18,6 +18,7 @@ properties: oneOf: - enum: - qcom,glymur-rpmhpd + - qcom,kaanapali-rpmhpd - qcom,mdm9607-rpmpd - qcom,milos-rpmhpd - qcom,msm8226-rpmpd diff --git a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml index fba6914ec40d88..948a9da111dfa5 100644 --- a/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml +++ b/Documentation/devicetree/bindings/power/renesas,sysc-rmobile.yaml @@ -45,7 +45,7 @@ properties: const: 0 additionalProperties: - $ref: "#/$defs/pd-node" + $ref: '#/$defs/pd-node' required: - compatible @@ -83,7 +83,7 @@ $defs: - '#power-domain-cells' additionalProperties: - $ref: "#/$defs/pd-node" + $ref: '#/$defs/pd-node' examples: - | diff --git a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml index a884e49c995fb6..b41db576f95de1 100644 --- a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml +++ b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml @@ -46,6 +46,7 @@ properties: - rockchip,rk3576-power-controller - rockchip,rk3588-power-controller - rockchip,rv1126-power-controller + - rockchip,rv1126b-power-controller "#power-domain-cells": const: 1 @@ -126,6 +127,7 @@ $defs: "include/dt-bindings/power/rk3568-power.h" "include/dt-bindings/power/rk3588-power.h" "include/dt-bindings/power/rockchip,rv1126-power.h" + "include/dt-bindings/power/rockchip,rv1126b-power-controller.h" clocks: minItems: 1 diff --git a/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml b/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml index 4c74cc78729e71..3e8689019251d7 100644 --- a/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml +++ b/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml @@ -21,7 +21,6 @@ properties: description: Maximum CHGIN regulation voltage in uV. enum: [ 5500000, 6500000, 11000000, 14500000 ] - usb-otg-vbus-regulator: type: object description: OTG boost regulator. diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9756.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9756.yaml new file mode 100644 index 00000000000000..a88bf6cd1927a2 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9756.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/richtek,rt9756.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT9756 Smart Cap Divider Charger + +maintainers: + - ChiYuan Huang + +description: | + The RT9756/RT9757 is a high efficiency and high charge current charger. + + The efficiency is up to 98.2% when VBAT = 4V, IBAT = 2A in DIV2 mode and 99.1% + when VBAT=4V, IBAT=1A in bypass mode. The maximum charger current is up to 8A + in DIV2 mode and 5A in bypass mode. The device integrates smart cap divider + topology, direct charging mode, external over-voltage protection control, an + input reverse blocking NFET and 2-way regulation, a dual phase charge pump + core, 8-Channel high speed ADCs and USB BC 1.2 detection. + + RT9770 is almost the same with RT9756/57, only BC 1.2 detection function is + removed to shrink the die size. + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + oneOf: + - enum: + - richtek,rt9756 + - richtek,rt9770 + - items: + - enum: + - richtek,rt9757 + - const: richtek,rt9756 + + reg: + maxItems: 1 + + wakeup-source: true + + interrupts: + maxItems: 1 + + shunt-resistor-micro-ohms: + description: Battery current sense resistor mounted. + default: 2000 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + charger@6f { + compatible = "richtek,rt9756"; + reg = <0x6f>; + wakeup-source; + interrupts-extended = <&gpio_intc 32 IRQ_TYPE_EDGE_FALLING>; + shunt-resistor-micro-ohms = <5000>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/samsung,battery.yaml b/Documentation/devicetree/bindings/power/supply/samsung,battery.yaml index 40292d581b1055..fa1ccff043bedb 100644 --- a/Documentation/devicetree/bindings/power/supply/samsung,battery.yaml +++ b/Documentation/devicetree/bindings/power/supply/samsung,battery.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Samsung SDI Batteries maintainers: - - Linus Walleij + - Linus Walleij description: | Samsung SDI (Samsung Digital Interface) batteries are all different versions diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml index 994fac12c8da06..4f19744844e9cb 100644 --- a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml +++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml @@ -65,7 +65,6 @@ properties: - const: vbus_v - const: usb_charger_c - required: - compatible - monitored-battery diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml index 1b192e197b114f..1197858e431f2e 100644 --- a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml @@ -55,7 +55,6 @@ properties: resets: maxItems: 1 - allOf: - $ref: pwm.yaml# diff --git a/Documentation/devicetree/bindings/pwm/thead,th1520-pwm.yaml b/Documentation/devicetree/bindings/pwm/thead,th1520-pwm.yaml new file mode 100644 index 00000000000000..855aec59ac53c4 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/thead,th1520-pwm.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/thead,th1520-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: T-HEAD TH1520 PWM controller + +maintainers: + - Michal Wilczynski + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + const: thead,th1520-pwm + + reg: + maxItems: 1 + + clocks: + items: + - description: SoC PWM clock + + "#pwm-cells": + const: 3 + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + #include + soc { + #address-cells = <2>; + #size-cells = <2>; + pwm@ffec01c000 { + compatible = "thead,th1520-pwm"; + reg = <0xff 0xec01c000 0x0 0x4000>; + clocks = <&clk CLK_PWM>; + #pwm-cells = <3>; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/da9211.txt b/Documentation/devicetree/bindings/regulator/da9211.txt deleted file mode 100644 index eb871447d50829..00000000000000 --- a/Documentation/devicetree/bindings/regulator/da9211.txt +++ /dev/null @@ -1,205 +0,0 @@ -* Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 - Voltage Regulator - -Required properties: -- compatible: "dlg,da9211" or "dlg,da9212" or "dlg,da9213" or "dlg,da9223" - or "dlg,da9214" or "dlg,da9224" or "dlg,da9215" or "dlg,da9225" -- reg: I2C slave address, usually 0x68. -- interrupts: the interrupt outputs of the controller -- regulators: A node that houses a sub-node for each regulator within the - device. Each sub-node is identified using the node's name, with valid - values listed below. The content of each sub-node is defined by the - standard binding for regulators; see regulator.txt. - BUCKA and BUCKB. - -Optional properties: -- enable-gpios: platform gpio for control of BUCKA/BUCKB. -- Any optional property defined in regulator.txt - - regulator-initial-mode and regulator-allowed-modes may be specified using - mode values from dt-bindings/regulator/dlg,da9211-regulator.h - -Example 1) DA9211 - pmic: da9211@68 { - compatible = "dlg,da9211"; - reg = <0x68>; - interrupts = <3 27>; - - regulators { - BUCKA { - regulator-name = "VBUCKA"; - regulator-min-microvolt = < 300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <2000000>; - regulator-max-microamp = <5000000>; - enable-gpios = <&gpio 27 0>; - regulator-allowed-modes = ; - }; - }; - }; - -Example 2) DA9212 - pmic: da9212@68 { - compatible = "dlg,da9212"; - reg = <0x68>; - interrupts = <3 27>; - - regulators { - BUCKA { - regulator-name = "VBUCKA"; - regulator-min-microvolt = < 300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <2000000>; - regulator-max-microamp = <5000000>; - enable-gpios = <&gpio 27 0>; - }; - BUCKB { - regulator-name = "VBUCKB"; - regulator-min-microvolt = < 300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <2000000>; - regulator-max-microamp = <5000000>; - enable-gpios = <&gpio 17 0>; - }; - }; - }; - -Example 3) DA9213 - pmic: da9213@68 { - compatible = "dlg,da9213"; - reg = <0x68>; - interrupts = <3 27>; - - regulators { - BUCKA { - regulator-name = "VBUCKA"; - regulator-min-microvolt = < 300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <3000000>; - regulator-max-microamp = <6000000>; - enable-gpios = <&gpio 27 0>; - }; - }; - }; - -Example 4) DA9223 - pmic: da9223@68 { - compatible = "dlg,da9223"; - reg = <0x68>; - interrupts = <3 27>; - - regulators { - BUCKA { - regulator-name = "VBUCKA"; - regulator-min-microvolt = < 300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <3000000>; - regulator-max-microamp = <6000000>; - enable-gpios = <&gpio 27 0>; - }; - }; - }; - -Example 5) DA9214 - pmic: da9214@68 { - compatible = "dlg,da9214"; - reg = <0x68>; - interrupts = <3 27>; - - regulators { - BUCKA { - regulator-name = "VBUCKA"; - regulator-min-microvolt = < 300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <3000000>; - regulator-max-microamp = <6000000>; - enable-gpios = <&gpio 27 0>; - }; - BUCKB { - regulator-name = "VBUCKB"; - regulator-min-microvolt = < 300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <3000000>; - regulator-max-microamp = <6000000>; - enable-gpios = <&gpio 17 0>; - }; - }; - }; - -Example 6) DA9224 - pmic: da9224@68 { - compatible = "dlg,da9224"; - reg = <0x68>; - interrupts = <3 27>; - - regulators { - BUCKA { - regulator-name = "VBUCKA"; - regulator-min-microvolt = < 300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <3000000>; - regulator-max-microamp = <6000000>; - enable-gpios = <&gpio 27 0>; - }; - BUCKB { - regulator-name = "VBUCKB"; - regulator-min-microvolt = < 300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <3000000>; - regulator-max-microamp = <6000000>; - enable-gpios = <&gpio 17 0>; - }; - }; - }; - -Example 7) DA9215 - pmic: da9215@68 { - compatible = "dlg,da9215"; - reg = <0x68>; - interrupts = <3 27>; - - regulators { - BUCKA { - regulator-name = "VBUCKA"; - regulator-min-microvolt = < 300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <4000000>; - regulator-max-microamp = <7000000>; - enable-gpios = <&gpio 27 0>; - }; - BUCKB { - regulator-name = "VBUCKB"; - regulator-min-microvolt = < 300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <4000000>; - regulator-max-microamp = <7000000>; - enable-gpios = <&gpio 17 0>; - }; - }; - }; - -Example 8) DA9225 - pmic: da9225@68 { - compatible = "dlg,da9225"; - reg = <0x68>; - interrupts = <3 27>; - - regulators { - BUCKA { - regulator-name = "VBUCKA"; - regulator-min-microvolt = < 300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <4000000>; - regulator-max-microamp = <7000000>; - enable-gpios = <&gpio 27 0>; - }; - BUCKB { - regulator-name = "VBUCKB"; - regulator-min-microvolt = < 300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <4000000>; - regulator-max-microamp = <7000000>; - enable-gpios = <&gpio 17 0>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/regulator/dlg,da9211.yaml b/Documentation/devicetree/bindings/regulator/dlg,da9211.yaml new file mode 100644 index 00000000000000..4d7e495a6f599e --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/dlg,da9211.yaml @@ -0,0 +1,103 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/dlg,da9211.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: + Dialog Semiconductor DA9211-9215, DA9223-9225 Voltage Regulators + +maintainers: + - Ariel D'Alessandro + +properties: + compatible: + enum: + - dlg,da9211 + - dlg,da9212 + - dlg,da9213 + - dlg,da9214 + - dlg,da9215 + - dlg,da9223 + - dlg,da9224 + - dlg,da9225 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + regulators: + type: object + additionalProperties: false + description: + List of regulators provided by the device + + patternProperties: + "^BUCK([AB])$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + Properties for a single BUCK regulator + + properties: + regulator-initial-mode: + items: + enum: [ 1, 2, 3 ] + description: + Defined in include/dt-bindings/regulator/dlg,da9211-regulator.h + + regulator-allowed-modes: + items: + enum: [ 1, 2, 3 ] + description: + Defined in include/dt-bindings/regulator/dlg,da9211-regulator.h + + enable-gpios: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - regulators + +additionalProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@68 { + compatible = "dlg,da9212"; + reg = <0x68>; + interrupts = <3 27>; + + regulators { + BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <2000000>; + regulator-max-microamp = <5000000>; + enable-gpios = <&gpio 27 0>; + }; + BUCKB { + regulator-name = "VBUCKB"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <2000000>; + regulator-max-microamp = <5000000>; + enable-gpios = <&gpio 17 0>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/regulator/fitipower,fp9931.yaml b/Documentation/devicetree/bindings/regulator/fitipower,fp9931.yaml new file mode 100644 index 00000000000000..c6585e3bacbec0 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/fitipower,fp9931.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/fitipower,fp9931.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: FitiPower FP9931/JD9930 Power Management Integrated Circuit + +maintainers: + - Andreas Kemnade + +description: + FP9931 is a Power Management IC to provide Power for EPDs with one 3.3V + switch, 2 symmetric LDOs behind 2 DC/DC converters, and one unsymmetric + regulator for a compensation voltage. + JD9930 has in addition some kind of night mode. + +properties: + compatible: + oneOf: + - const: fitipower,fp9931 + + - items: + - const: fitipower,jd9930 + - const: fitipower,fp9931 + + reg: + maxItems: 1 + + enable-gpios: + maxItems: 1 + + pg-gpios: + maxItems: 1 + + en-ts-gpios: + maxItems: 1 + + xon-gpios: + maxItems: 1 + + vin-supply: + description: + Supply for the whole chip. Some vendor kernels and devicetrees + declare this as a non-existing GPIO named "pwrall". + + fitipower,tdly-ms: + description: + Power up soft start delay settings tDLY1-4 bitfields in the + POWERON_DELAY register + items: + - enum: [0, 1, 2, 4] + - enum: [0, 1, 2, 4] + - enum: [0, 1, 2, 4] + - enum: [0, 1, 2, 4] + + regulators: + type: object + additionalProperties: false + patternProperties: + "^(vcom|vposneg|v3p3)$": + unevaluatedProperties: false + type: object + $ref: /schemas/regulator/regulator.yaml + +required: + - compatible + - reg + - pg-gpios + - enable-gpios + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@18 { + compatible = "fitipower,fp9931"; + reg = <0x18>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fp9931_gpio>; + vin-supply = <&epd_pmic_supply>; + pg-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>; + en-ts-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; + fitipower,tdly-ms = <2 2 4 4>; + + regulators { + vcom { + regulator-name = "vcom"; + regulator-min-microvolt = <2352840>; + regulator-max-microvolt = <2352840>; + }; + + vposneg { + regulator-name = "vposneg"; + regulator-min-microvolt = <15060000>; + regulator-max-microvolt = <15060000>; + }; + + v3p3 { + regulator-name = "v3p3"; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6316b-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6316b-regulator.yaml new file mode 100644 index 00000000000000..ea595935f4c4d3 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6316b-regulator.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mediatek,mt6316b-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT6316 BP/VP SPMI PMIC Regulators + +maintainers: + - AngeloGioacchino Del Regno + +description: + The MediaTek MT6316BP/VP PMICs are fully controlled by SPMI interface, both + feature four step-down DC/DC (buck) converters, and provides 2+2 Phases, + joining Buck 1+2 for the first phase, and Buck 3+4 for the second phase. + +properties: + compatible: + const: mediatek,mt6316b-regulator + + reg: + maxItems: 1 + +patternProperties: + "^vbuck(12|34)$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + properties: + regulator-allowed-modes: + description: | + Allowed Buck regulator operating modes allowed. Valid values below. + 0 - Normal mode with automatic power saving, reducing the switching + frequency when light load conditions are detected + 1 - Forced Continuous Conduction mode (FCCM) for improved voltage + regulation accuracy with constant switching frequency but lower + regulator efficiency + 2 - Forced Low Power mode for improved regulator efficiency, used + when no heavy load is expected, will shut down unnecessary IP + blocks and secondary phases to reduce quiescent current. + This mode does not limit the maximum output current but unless + only a light load is applied, there will be regulation accuracy + and efficiency losses. + minItems: 1 + maxItems: 3 + items: + enum: [ 0, 1, 2 ] + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include + + spmi { + #address-cells = <2>; + #size-cells = <0>; + + pmic@8 { + compatible = "mediatek,mt6316b-regulator"; + reg = <0x8 SPMI_USID>; + + vbuck12 { + regulator-name = "dvdd_core"; + regulator-min-microvolt = <450000>; + regulator-max-microvolt = <965000>; + regulator-allowed-modes = <0 1 2>; + regulator-enable-ramp-delay = <256>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6316c-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6316c-regulator.yaml new file mode 100644 index 00000000000000..186dcd3f11ed0d --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6316c-regulator.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mediatek,mt6316c-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT6316 CP/HP/KP SPMI PMIC Regulators + +maintainers: + - AngeloGioacchino Del Regno + +description: + The MediaTek MT6316CP/HP/KP PMICs are fully controlled by SPMI interface, + features four step-down DC/DC (buck) converters, and provides 3+1 Phases, + joining Buck 1+2+4 for the first phase, and uses Buck 3 for the second. + +properties: + compatible: + const: mediatek,mt6316c-regulator + + reg: + maxItems: 1 + +patternProperties: + "^vbuck(124|3)$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + properties: + regulator-allowed-modes: + description: | + Allowed Buck regulator operating modes allowed. Valid values below. + 0 - Normal mode with automatic power saving, reducing the switching + frequency when light load conditions are detected + 1 - Forced Continuous Conduction mode (FCCM) for improved voltage + regulation accuracy with constant switching frequency but lower + regulator efficiency + 2 - Forced Low Power mode for improved regulator efficiency, used + when no heavy load is expected, will shut down unnecessary IP + blocks and secondary phases to reduce quiescent current. + This mode does not limit the maximum output current but unless + only a light load is applied, there will be regulation accuracy + and efficiency losses. + minItems: 1 + maxItems: 3 + items: + enum: [ 0, 1, 2 ] + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include + + spmi { + #address-cells = <2>; + #size-cells = <0>; + + pmic@6 { + compatible = "mediatek,mt6316c-regulator"; + reg = <0x6 SPMI_USID>; + + vbuck124 { + regulator-name = "dvdd_proc_m"; + regulator-min-microvolt = <450000>; + regulator-max-microvolt = <1277500>; + regulator-allowed-modes = <0 1 2>; + regulator-enable-ramp-delay = <256>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6316d-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6316d-regulator.yaml new file mode 100644 index 00000000000000..aa9e9ef3b52d9f --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6316d-regulator.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mediatek,mt6316d-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT6316 DP/TP SPMI PMIC Regulators + +maintainers: + - AngeloGioacchino Del Regno + +description: + The MediaTek MT6316DP/TP PMICs are fully controlled by SPMI interface, both + feature four step-down DC/DC (buck) converters, and provides a single Phase, + joining Buck 1+2+3+4. + +properties: + compatible: + const: mediatek,mt6316d-regulator + + reg: + maxItems: 1 + + vbuck1234: + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + properties: + regulator-allowed-modes: + description: | + Allowed Buck regulator operating modes allowed. Valid values below. + 0 - Normal mode with automatic power saving, reducing the switching + frequency when light load conditions are detected + 1 - Forced Continuous Conduction mode (FCCM) for improved voltage + regulation accuracy with constant switching frequency but lower + regulator efficiency + 2 - Forced Low Power mode for improved regulator efficiency, used + when no heavy load is expected, will shut down unnecessary IP + blocks and secondary phases to reduce quiescent current. + This mode does not limit the maximum output current but unless + only a light load is applied, there will be regulation accuracy + and efficiency losses. + minItems: 1 + maxItems: 3 + items: + enum: [ 0, 1, 2 ] + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include + + spmi { + #address-cells = <2>; + #size-cells = <0>; + + pmic@7 { + compatible = "mediatek,mt6316d-regulator"; + reg = <0x7 SPMI_USID>; + + vbuck1234 { + regulator-name = "dvdd_gpustack"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1277500>; + regulator-allowed-modes = <0 1 2>; + regulator-enable-ramp-delay = <256>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6363-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6363-regulator.yaml new file mode 100644 index 00000000000000..4f79d4f81d499d --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6363-regulator.yaml @@ -0,0 +1,146 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mediatek,mt6363-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT6363 PMIC Regulators + +maintainers: + - AngeloGioacchino Del Regno + +description: + The MT6363 SPMI PMIC provides 10 BUCK and 25 LDO (Low DropOut) regulators + and can optionally provide overcurrent warnings with one ocp interrupt + for each voltage regulator. + +properties: + compatible: + const: mediatek,mt6363-regulator + + reg: + maxItems: 1 + + vsys-vbuck1-supply: + description: Input supply for vbuck1 + + vsys-vbuck2-supply: + description: Input supply for vbuck2 + + vsys-vbuck3-supply: + description: Input supply for vbuck3 + + vsys-vbuck4-supply: + description: Input supply for vbuck4 + + vsys-vbuck5-supply: + description: Input supply for vbuck5 + + vsys-vbuck6-supply: + description: Input supply for vbuck6 + + vsys-vbuck7-supply: + description: Input supply for vbuck7 + + vsys-vs1-supply: + description: Input supply for vs1 + + vsys-vs2-supply: + description: Input supply for vs2 + + vsys-vs3-supply: + description: Input supply for vs3 + + vs1-ldo1-supply: + description: Input supply for va15, vio0p75, vm18, vrf18, vrf-io18 + + vs1-ldo2-supply: + description: Input supply for vcn15, vio18, vufs18 + + vs2-ldo1-supply: + description: Input supply for vsram-cpub, vsram-cpum, vrf12, vrf13, vufs12 + + vs2-ldo2-supply: + description: Input supply for va12-1, va12-2, vcn13, vsram-cpul + + vs3-ldo1-supply: + description: Input supply for vsram-apu, vsram-digrf, vsram-mdfe + + vs3-ldo2-supply: + description: Input supply for vsram-modem, vrf0p9 + + vsys-ldo1-supply: + description: Input supply for vaux18, vemc, vtref18 + +patternProperties: + "^v(buck[1-7]|s[1-3])$": + description: Buck regulators + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + properties: + regulator-allowed-modes: + description: | + Allowed Buck regulator operating modes allowed. Valid values below. + 0 - Normal mode with automatic power saving, reducing the switching + frequency when light load conditions are detected + 1 - Forced Continuous Conduction mode (FCCM) for improved voltage + regulation accuracy with constant switching frequency but lower + regulator efficiency + 2 - Forced Low Power mode for improved regulator efficiency, used + when no heavy load is expected, does not limit the maximum out + current but unless only a light load is applied, there will be + regulation accuracy and efficiency losses. + 3 - Forced Ultra Low Power mode for ultra low load, this greatly + reduces the maximum output power, makes the regulator to be + efficient only for ultra light load, and greatly reduces the + quiescent current (Iq) of the buck. + maxItems: 3 + items: + enum: [ 0, 1, 2, 3 ] + + "^va(12-1|12-2|15)$": + $ref: "#/$defs/ldo-common" + + "^v(aux|m|rf-io|tref)18$": + $ref: "#/$defs/ldo-common" + + "^v(cn13|cn15|emc)$": + $ref: "#/$defs/ldo-common" + + "^vio(0p75|18)$": + $ref: "#/$defs/ldo-common" + + "^vrf(0p9|12|13|18)$": + $ref: "#/$defs/ldo-common" + + "^vsram-(apu|cpub|cpum|cpul|digrf|mdfe|modem)$": + $ref: "#/$defs/ldo-common" + + "^vufs(12|18)$": + $ref: "#/$defs/ldo-common" + +$defs: + ldo-common: + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + properties: + regulator-allowed-modes: + description: | + Allowed LDO regulator operating modes allowed. Valid values below. + 0 - Normal mode with automatic power saving, reducing the switching + frequency when light load conditions are detected + 2 - Forced Low Power mode for improved regulator efficiency, used + when no heavy load is expected, does not limit the maximum out + current but unless only a light load is applied, there will be + regulation accuracy and efficiency losses. + maxItems: 2 + items: + enum: [ 0, 2 ] + +required: + - compatible + - reg + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml index a5486c36830f0b..ec04adfb9d1cbb 100644 --- a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml @@ -41,6 +41,21 @@ properties: interrupts: maxItems: 1 + inl1-supply: + description: Regulator supply for the INL1 pin group, powering LDOx + + inb13-supply: + description: + Regulator supply for the INB13 pin group, powering BUCK1 and BUCK3. + + inb26-supply: + description: + Regulator supply for the INB26 pin group, powering BUCK2 and BUCK6. + + inb45-supply: + description: + Regulator supply for the INB45 pin group, powering BUCK4 and BUCK5. + regulators: type: object description: | @@ -124,6 +139,30 @@ properties: When WDOG_B signal is asserted a warm reset will be done instead of cold reset. + nxp,pmic-on-req-on-debounce-us: + enum: [ 120, 20000, 100000, 750000 ] + description: Debounce time for PMIC_ON_REQ high. + + nxp,pmic-on-req-off-debounce-us: + enum: [ 120, 2000 ] + description: Debounce time for PMIC_ON_REQ is asserted low + + nxp,power-on-step-ms: + enum: [ 1, 2, 4, 8] + description: Time step configuration during power on sequence + + nxp,power-down-step-ms: + enum: [ 2, 4, 8, 16 ] + description: Time step configuration during power down sequence + + nxp,restart-ms: + enum: [ 250, 500 ] + description: Time to stay off regulators during Cold reset + + npx,pmic-rst-b-debounce-ms: + enum: [ 10, 50, 100, 500, 1000, 2000, 4000, 8000 ] + description: PMIC_RST_B debounce time + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml index 4c5b0629aa3e62..58bb0ad5dda44e 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml @@ -8,7 +8,7 @@ title: Qualcomm Technologies, Inc. RPMh Regulators maintainers: - Bjorn Andersson - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: | rpmh-regulator devices support PMIC regulator management via the Voltage @@ -51,10 +51,15 @@ description: | For PM8450, smps1 - smps6, ldo1 - ldo4 For PM8550, smps1 - smps6, ldo1 - ldo17, bob1 - bob2 For PM8998, smps1 - smps13, ldo1 - ldo28, lvs1 - lvs2 + For PMH0101, ldo1 - ldo18, bob1 - bob2 + For PMH0104, smps1 - smps4 + For PMH0110, smps1 - smps10, ldo1 - ldo4 For PMI8998, bob For PMC8380, smps1 - smps8, ldo1 - lodo3 + For PMCX0102, smps1 - smps10, ldo1 - ldo4 For PMR735A, smps1 - smps3, ldo1 - ldo7 For PMR735B, ldo1 - ldo12 + For PMR735D, ldo1 - ldo7 For PMX55, smps1 - smps7, ldo1 - ldo16 For PMX65, smps1 - smps8, ldo1 - ldo21 For PMX75, smps1 - smps10, ldo1 - ldo21 @@ -85,12 +90,17 @@ properties: - qcom,pmc8180-rpmh-regulators - qcom,pmc8180c-rpmh-regulators - qcom,pmc8380-rpmh-regulators + - qcom,pmcx0102-rpmh-regulators - qcom,pmg1110-rpmh-regulators + - qcom,pmh0101-rpmh-regulators + - qcom,pmh0104-rpmh-regulators + - qcom,pmh0110-rpmh-regulators - qcom,pmi8998-rpmh-regulators - qcom,pmm8155au-rpmh-regulators - qcom,pmm8654au-rpmh-regulators - qcom,pmr735a-rpmh-regulators - qcom,pmr735b-rpmh-regulators + - qcom,pmr735d-rpmh-regulators - qcom,pmx55-rpmh-regulators - qcom,pmx65-rpmh-regulators - qcom,pmx75-rpmh-regulators @@ -100,7 +110,7 @@ properties: RPMh resource name suffix used for the regulators found on this PMIC. $ref: /schemas/types.yaml#/definitions/string - enum: [a, b, c, d, e, f, g, h, i, j, k, l, m, n] + pattern: "^[a-n]|[A-N]_E[0-3]+$" qcom,always-wait-for-ack: description: | @@ -246,6 +256,7 @@ allOf: compatible: enum: - qcom,pm8005-rpmh-regulators + - qcom,pmh0104-rpmh-regulators then: patternProperties: "^vdd-s[1-4]-supply$": true @@ -422,6 +433,34 @@ allOf: properties: vdd-s1-supply: true + - if: + properties: + compatible: + enum: + - qcom,pmh0101-rpmh-regulators + then: + properties: + vdd-l1-l4-l10-supply: true + vdd-l2-l13-l14-supply: true + vdd-l3-l11-supply: true + vdd-l5-l16-supply: true + vdd-l6-l7-supply: true + vdd-l8-l9-supply: true + patternProperties: + "^vdd-l(1[2578])-supply$": true + "^vdd-bob[1-2]-supply$": true + + - if: + properties: + compatible: + enum: + - qcom,pmcx0102-rpmh-regulators + - qcom,pmh0110-rpmh-regulators + then: + patternProperties: + "^vdd-l[1-4]-supply$": true + "^vdd-s([1-9]|10)-supply$": true + - if: properties: compatible: @@ -459,6 +498,18 @@ allOf: patternProperties: "^vdd-l([3-6]|9|1[0-2])-supply$": true + - if: + properties: + compatible: + enum: + - qcom,pmr735d-rpmh-regulators + then: + properties: + vdd-l1-l2-l5-supply: true + vdd-l3-l4-supply: true + patternProperties: + "^vdd-l[6-7]-supply$": true + - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml index b73762e151bbd6..84546fec3b1859 100644 --- a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml @@ -55,7 +55,6 @@ properties: delay time 0us, 10us, 20us, 40us. If this property is missing then keep in chip default. - richtek,switch-freq-select: $ref: /schemas/types.yaml#/definitions/uint8 enum: [0, 1, 2] diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml index 661c2b425da35c..137f9502831335 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml @@ -24,6 +24,7 @@ properties: - qcom,msm8998-adsp-pas - qcom,msm8998-slpi-pas - qcom,sdm660-adsp-pas + - qcom,sdm660-cdsp-pas - qcom,sdm845-adsp-pas - qcom,sdm845-cdsp-pas - qcom,sdm845-slpi-pas @@ -31,9 +32,6 @@ properties: reg: maxItems: 1 - cx-supply: - description: Phandle to the CX regulator - px-supply: description: Phandle to the PX regulator @@ -69,6 +67,8 @@ allOf: - qcom,msm8996-slpi-pil - qcom,msm8998-adsp-pas - qcom,msm8998-slpi-pas + - qcom,sdm660-adsp-pas + - qcom,sdm660-cdsp-pas - qcom,sdm845-adsp-pas - qcom,sdm845-cdsp-pas - qcom,sdm845-slpi-pas @@ -93,6 +93,8 @@ allOf: - qcom,msm8996-slpi-pil - qcom,msm8998-adsp-pas - qcom,msm8998-slpi-pas + - qcom,sdm660-adsp-pas + - qcom,sdm660-cdsp-pas - qcom,sdm845-adsp-pas - qcom,sdm845-cdsp-pas - qcom,sdm845-slpi-pas @@ -103,16 +105,6 @@ allOf: interrupt-names: maxItems: 5 - - if: - properties: - compatible: - contains: - enum: - - qcom,msm8974-adsp-pil - then: - required: - - cx-supply - - if: properties: compatible: @@ -120,8 +112,11 @@ allOf: enum: - qcom,msm8226-adsp-pil - qcom,msm8953-adsp-pil + - qcom,msm8974-adsp-pil - qcom,msm8996-adsp-pil - qcom,msm8998-adsp-pas + - qcom,sdm660-adsp-pas + - qcom,sdm660-cdsp-pas then: properties: power-domains: @@ -178,6 +173,7 @@ allOf: - qcom,msm8998-adsp-pas - qcom,msm8998-slpi-pas - qcom,sdm660-adsp-pas + - qcom,sdm660-cdsp-pas then: properties: qcom,qmp: false @@ -187,6 +183,7 @@ examples: #include #include #include + #include adsp { compatible = "qcom,msm8974-adsp-pil"; @@ -204,7 +201,8 @@ examples: clocks = <&rpmcc RPM_CXO_CLK>; clock-names = "xo"; - cx-supply = <&pm8841_s2>; + power-domains = <&rpmpd MSM8974_VDDCX>; + power-domain-names = "cx"; memory-region = <&adsp_region>; diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc8280xp-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc8280xp-pas.yaml index 96d53baf6e0070..5dbda3a550477f 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sc8280xp-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc8280xp-pas.yaml @@ -91,9 +91,13 @@ allOf: power-domains: items: - description: NSP power domain + - description: CX power domain + - description: MXC power domain power-domain-names: items: - const: nsp + - const: cx + - const: mxc unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml index a492f74a860819..a927551356e69d 100644 --- a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml @@ -79,7 +79,6 @@ properties: It should be set as 3 (Single-Core mode) which is also the default if omitted. - # R5F Processor Child Nodes: # ========================== @@ -167,7 +166,6 @@ patternProperties: - description: region reserved for firmware image sections additionalItems: true - # Optional properties: # -------------------- # The following properties are optional properties for each of the R5F cores: diff --git a/Documentation/devicetree/bindings/reset/eswin,eic7700-reset.yaml b/Documentation/devicetree/bindings/reset/eswin,eic7700-reset.yaml new file mode 100644 index 00000000000000..cf2fdb90757106 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/eswin,eic7700-reset.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/reset/eswin,eic7700-reset.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ESWIN EIC7700 SoC reset controller + +maintainers: + - Yifeng Huang + - Xuyang Dong + +description: + The system reset controller can be used to reset various peripheral + controllers in ESWIN eic7700 SoC. + +properties: + compatible: + const: eswin,eic7700-reset + + reg: + maxItems: 1 + + '#reset-cells': + const: 1 + +required: + - compatible + - reg + - '#reset-cells' + +additionalProperties: false + +examples: + - | + #include + + reset-controller@51828300 { + compatible = "eswin,eic7700-reset"; + reg = <0x51828300 0x200>; + #reset-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/reset/microchip,rst.yaml b/Documentation/devicetree/bindings/reset/microchip,rst.yaml index f2da0693b05a03..e190e526f3e9ab 100644 --- a/Documentation/devicetree/bindings/reset/microchip,rst.yaml +++ b/Documentation/devicetree/bindings/reset/microchip,rst.yaml @@ -20,9 +20,14 @@ properties: pattern: "^reset-controller@[0-9a-f]+$" compatible: - enum: - - microchip,sparx5-switch-reset - - microchip,lan966x-switch-reset + oneOf: + - enum: + - microchip,sparx5-switch-reset + - microchip,lan966x-switch-reset + - items: + - enum: + - microchip,lan9691-switch-reset + - const: microchip,lan966x-switch-reset reg: items: diff --git a/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml b/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml index b0b20af15313b1..c83469a1b379af 100644 --- a/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml +++ b/Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml @@ -15,12 +15,14 @@ description: properties: compatible: - items: - - enum: - - renesas,r9a07g043-usbphy-ctrl # RZ/G2UL and RZ/Five - - renesas,r9a07g044-usbphy-ctrl # RZ/G2{L,LC} - - renesas,r9a07g054-usbphy-ctrl # RZ/V2L - - const: renesas,rzg2l-usbphy-ctrl + oneOf: + - items: + - enum: + - renesas,r9a07g043-usbphy-ctrl # RZ/G2UL and RZ/Five + - renesas,r9a07g044-usbphy-ctrl # RZ/G2{L,LC} + - renesas,r9a07g054-usbphy-ctrl # RZ/V2L + - const: renesas,rzg2l-usbphy-ctrl + - const: renesas,r9a08g045-usbphy-ctrl # RZ/G3S reg: maxItems: 1 @@ -48,6 +50,20 @@ properties: $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false + renesas,sysc-pwrrdy: + description: + The system controller PWRRDY indicates to the USB PHY if the power supply + is ready. PWRRDY needs to be set during power-on before applying any + other settings. It also needs to be set before powering off the USB. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: + System controller phandle required by USB PHY CTRL driver to set + PWRRDY + - description: Register offset associated with PWRRDY + - description: Register bitmask associated with PWRRDY + required: - compatible - reg @@ -57,6 +73,19 @@ required: - '#reset-cells' - regulator-vbus +allOf: + - if: + properties: + compatible: + contains: + const: renesas,r9a08g045-usbphy-ctrl + then: + required: + - renesas,sysc-pwrrdy + else: + properties: + renesas,sysc-pwrrdy: false + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/reset/thead,th1520-reset.yaml b/Documentation/devicetree/bindings/reset/thead,th1520-reset.yaml index f2e91d0add7a60..7b5053c177fe1c 100644 --- a/Documentation/devicetree/bindings/reset/thead,th1520-reset.yaml +++ b/Documentation/devicetree/bindings/reset/thead,th1520-reset.yaml @@ -16,7 +16,13 @@ maintainers: properties: compatible: enum: - - thead,th1520-reset + - thead,th1520-reset # Reset controller for VO subsystem + - thead,th1520-reset-ao + - thead,th1520-reset-ap + - thead,th1520-reset-dsp + - thead,th1520-reset-misc + - thead,th1520-reset-vi + - thead,th1520-reset-vp reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml b/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml index 1db08ce9ae270d..68640abacd954d 100644 --- a/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml +++ b/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml @@ -40,7 +40,6 @@ properties: Please see https://software-dl.ti.com/tisci/esd/latest/index.html for protocol documentation for the values to be used for different devices. - additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/riscv/anlogic.yaml b/Documentation/devicetree/bindings/riscv/anlogic.yaml new file mode 100644 index 00000000000000..91b1526c99aa3c --- /dev/null +++ b/Documentation/devicetree/bindings/riscv/anlogic.yaml @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/riscv/anlogic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Anlogic SoC-based boards + +maintainers: + - Junhui Liu + +description: + Anlogic SoC-based boards + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - items: + - enum: + - milianke,mlkpai-fs01 + - const: anlogic,dr1v90 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index 153d0dac57fb39..d733c0bd534fb6 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -48,6 +48,7 @@ properties: - amd,mbv64 - andestech,ax45mp - canaan,k210 + - nuclei,ux900 - sifive,bullet0 - sifive,e5 - sifive,e7 @@ -70,6 +71,7 @@ properties: - enum: - sifive,e51 - sifive,u54-mc + - sifive,x280 - const: sifive,rocket0 - const: riscv - const: riscv # Simulator only diff --git a/Documentation/devicetree/bindings/riscv/extensions.yaml b/Documentation/devicetree/bindings/riscv/extensions.yaml index 543ac94718e8cd..5bab356addc848 100644 --- a/Documentation/devicetree/bindings/riscv/extensions.yaml +++ b/Documentation/devicetree/bindings/riscv/extensions.yaml @@ -217,6 +217,12 @@ properties: memory types as ratified in the 20191213 version of the privileged ISA specification. + - const: svrsw60t59b + description: + The Svrsw60t59b extension for providing two more bits[60:59] to + PTE/PMD entry as ratified at commit 28bde925e7a7 ("PTE Reserved + for SW bits 60:59") of riscv-non-isa/riscv-iommu. + - const: svvptc description: The standard Svvptc supervisor-level extension for @@ -242,6 +248,11 @@ properties: is supported as ratified at commit 5059e0ca641c ("update to ratified") of the riscv-zacas. + - const: zalasr + description: | + The standard Zalasr extension for load-acquire/store-release as frozen + at commit 194f0094 ("Version 0.9 for freeze") of riscv-zalasr. + - const: zalrsc description: | The standard Zalrsc extension for load-reserved/store-conditional as @@ -366,6 +377,20 @@ properties: guarantee on LR/SC sequences, as ratified in commit b1d806605f87 ("Updated to ratified state.") of the riscv profiles specification. + - const: zilsd + description: + The standard Zilsd extension which provides support for aligned + register-pair load and store operations in 32-bit instruction + encodings, as ratified in commit f88abf1 ("Integrating + load/store pair for RV32 with the main manual") of riscv-isa-manual. + + - const: zclsd + description: + The Zclsd extension implements the compressed (16-bit) version of the + Load/Store Pair for RV32. As with Zilsd, this extension was ratified + in commit f88abf1 ("Integrating load/store pair for RV32 with the + main manual") of riscv-isa-manual. + - const: zk description: The standard Zk Standard Scalar cryptography extension as ratified @@ -871,6 +896,16 @@ properties: anyOf: - const: v - const: zve32x + # Zclsd depends on Zilsd and Zca + - if: + contains: + anyOf: + - const: zclsd + then: + contains: + allOf: + - const: zilsd + - const: zca allOf: # Zcf extension does not exist on rv64 @@ -888,6 +923,18 @@ allOf: not: contains: const: zcf + # Zilsd extension does not exist on rv64 + - if: + properties: + riscv,isa-base: + contains: + const: rv64i + then: + properties: + riscv,isa-extensions: + not: + contains: + const: zilsd additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/riscv/spacemit.yaml b/Documentation/devicetree/bindings/riscv/spacemit.yaml index c56b62a6299ac2..9c49482002f768 100644 --- a/Documentation/devicetree/bindings/riscv/spacemit.yaml +++ b/Documentation/devicetree/bindings/riscv/spacemit.yaml @@ -22,6 +22,8 @@ properties: - enum: - bananapi,bpi-f3 - milkv,jupiter + - spacemit,musepi-pro + - xunlong,orangepi-r2s - xunlong,orangepi-rv2 - const: spacemit,k1 diff --git a/Documentation/devicetree/bindings/riscv/starfive.yaml b/Documentation/devicetree/bindings/riscv/starfive.yaml index 04510341a71e84..9253aab2151888 100644 --- a/Documentation/devicetree/bindings/riscv/starfive.yaml +++ b/Documentation/devicetree/bindings/riscv/starfive.yaml @@ -33,8 +33,15 @@ properties: - pine64,star64 - starfive,visionfive-2-v1.2a - starfive,visionfive-2-v1.3b + - xunlong,orangepi-rv - const: starfive,jh7110 + - items: + - enum: + - starfive,visionfive-2-lite + - starfive,visionfive-2-lite-emmc + - const: starfive,jh7110s + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/riscv/tenstorrent.yaml b/Documentation/devicetree/bindings/riscv/tenstorrent.yaml new file mode 100644 index 00000000000000..e15359b2aab63a --- /dev/null +++ b/Documentation/devicetree/bindings/riscv/tenstorrent.yaml @@ -0,0 +1,28 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/riscv/tenstorrent.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Tenstorrent SoC-based boards + +maintainers: + - Drew Fustini + - Joel Stanley + +description: + Tenstorrent SoC-based boards + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: Tenstorrent Blackhole PCIe card + items: + - const: tenstorrent,blackhole-card + - const: tenstorrent,blackhole + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/rng/inside-secure,safexcel-eip76.yaml b/Documentation/devicetree/bindings/rng/inside-secure,safexcel-eip76.yaml index 0877eb44f9edc6..f501fc7691c6e9 100644 --- a/Documentation/devicetree/bindings/rng/inside-secure,safexcel-eip76.yaml +++ b/Documentation/devicetree/bindings/rng/inside-secure,safexcel-eip76.yaml @@ -44,7 +44,6 @@ properties: - const: core - const: reg - allOf: - if: properties: @@ -58,7 +57,6 @@ allOf: required: - interrupts - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/rng/intel,ixp46x-rng.yaml b/Documentation/devicetree/bindings/rng/intel,ixp46x-rng.yaml index 9f7590ce6b3d6e..146593a669d667 100644 --- a/Documentation/devicetree/bindings/rng/intel,ixp46x-rng.yaml +++ b/Documentation/devicetree/bindings/rng/intel,ixp46x-rng.yaml @@ -12,7 +12,7 @@ description: | 32 bit random number. maintainers: - - Linus Walleij + - Linus Walleij properties: compatible: diff --git a/Documentation/devicetree/bindings/rng/microchip,pic32-rng.txt b/Documentation/devicetree/bindings/rng/microchip,pic32-rng.txt deleted file mode 100644 index c6d1003befb772..00000000000000 --- a/Documentation/devicetree/bindings/rng/microchip,pic32-rng.txt +++ /dev/null @@ -1,17 +0,0 @@ -* Microchip PIC32 Random Number Generator - -The PIC32 RNG provides a pseudo random number generator which can be seeded by -another true random number generator. - -Required properties: -- compatible : should be "microchip,pic32mzda-rng" -- reg : Specifies base physical address and size of the registers. -- clocks: clock phandle. - -Example: - - rng: rng@1f8e6000 { - compatible = "microchip,pic32mzda-rng"; - reg = <0x1f8e6000 0x1000>; - clocks = <&PBCLK5>; - }; diff --git a/Documentation/devicetree/bindings/rng/microchip,pic32-rng.yaml b/Documentation/devicetree/bindings/rng/microchip,pic32-rng.yaml new file mode 100644 index 00000000000000..1f6f6fb81ddc53 --- /dev/null +++ b/Documentation/devicetree/bindings/rng/microchip,pic32-rng.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rng/microchip,pic32-rng.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PIC32 Random Number Generator + +description: | + The PIC32 RNG provides a pseudo random number generator which can be seeded + by another true random number generator. + +maintainers: + - Joshua Henderson + +properties: + compatible: + enum: + - microchip,pic32mzda-rng + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + rng: rng@1f8e6000 { + compatible = "microchip,pic32mzda-rng"; + reg = <0x1f8e6000 0x1000>; + clocks = <&PBCLK5>; + }; diff --git a/Documentation/devicetree/bindings/rtc/andestech,atcrtc100.yaml b/Documentation/devicetree/bindings/rtc/andestech,atcrtc100.yaml new file mode 100644 index 00000000000000..ec0a736793c7ea --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/andestech,atcrtc100.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/andestech,atcrtc100.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Andes ATCRTC100 Real-Time Clock + +maintainers: + - CL Wang + +allOf: + - $ref: rtc.yaml# + +properties: + compatible: + enum: + - andestech,atcrtc100 + + reg: + maxItems: 1 + + interrupts: + items: + - description: Periodic timekeeping interrupt + - description: RTC alarm interrupt + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include + + rtc@f0300000 { + compatible = "andestech,atcrtc100"; + reg = <0xf0300000 0x100>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>, <2 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/rtc/apple,smc-rtc.yaml b/Documentation/devicetree/bindings/rtc/apple,smc-rtc.yaml new file mode 100644 index 00000000000000..607b610665a28b --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/apple,smc-rtc.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/apple,smc-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple SMC RTC + +description: + Apple Silicon Macs (M1, etc.) have an RTC that is part of the PMU IC, + but most of the PMU functionality is abstracted out by the SMC. + An additional RTC offset stored inside NVMEM is required to compute + the current date/time. + +maintainers: + - Sven Peter + +properties: + compatible: + const: apple,smc-rtc + + nvmem-cells: + items: + - description: 48bit RTC offset, specified in 32768 (2^15) Hz clock ticks + + nvmem-cell-names: + items: + - const: rtc_offset + +required: + - compatible + - nvmem-cells + - nvmem-cell-names + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.yaml b/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.yaml index b1c1a0e2131881..2b1215b4958075 100644 --- a/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.yaml +++ b/Documentation/devicetree/bindings/rtc/faraday,ftrtc010.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Faraday Technology FTRTC010 Real Time Clock maintainers: - - Linus Walleij + - Linus Walleij description: | This RTC appears in for example the Storlink Gemini family of SoCs. diff --git a/Documentation/devicetree/bindings/rtc/nvidia,vrs-10.yaml b/Documentation/devicetree/bindings/rtc/nvidia,vrs-10.yaml new file mode 100644 index 00000000000000..c7dbc8b83c0047 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/nvidia,vrs-10.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/nvidia,vrs-10.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Voltage Regulator Specification Real Time Clock + +maintainers: + - Shubhi Garg + +description: + NVIDIA VRS-10 (Voltage Regulator Specification) is a Power Management IC + (PMIC) that implements a power sequencing solution with I2C interface. + The device includes a real-time clock (RTC) with 32kHz clock output and + backup battery support, alarm functionality for system wake-up from + suspend and shutdown states, OTP memory for power sequencing configuration, + and an interrupt controller for managing VRS events. + +properties: + compatible: + const: nvidia,vrs-10 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@3c { + compatible = "nvidia,vrs-10"; + reg = <0x3c>; + interrupt-parent = <&pmc>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/rtc/renesas,rz-rtca3.yaml b/Documentation/devicetree/bindings/rtc/renesas,rz-rtca3.yaml index e70eeb66aa648b..ccb1638c35b9bf 100644 --- a/Documentation/devicetree/bindings/rtc/renesas,rz-rtca3.yaml +++ b/Documentation/devicetree/bindings/rtc/renesas,rz-rtca3.yaml @@ -9,14 +9,12 @@ title: Renesas RTCA-3 Real Time Clock maintainers: - Claudiu Beznea -allOf: - - $ref: rtc.yaml# - properties: compatible: items: - enum: - renesas,r9a08g045-rtca3 # RZ/G3S + - renesas,r9a09g057-rtca3 # RZ/V2H - const: renesas,rz-rtca3 reg: @@ -48,8 +46,12 @@ properties: maxItems: 1 resets: - items: - - description: VBATTB module reset + minItems: 1 + maxItems: 2 + + reset-names: + minItems: 1 + maxItems: 2 required: - compatible @@ -61,6 +63,39 @@ required: - power-domains - resets +allOf: + - $ref: rtc.yaml# + + - if: + properties: + compatible: + contains: + const: renesas,r9a08g045-rtca3 + then: + properties: + resets: + items: + - description: VBATTB module reset + reset-names: + const: vbattb + - if: + properties: + compatible: + contains: + const: renesas,r9a09g057-rtca3 + then: + properties: + resets: + items: + - description: RTC reset + - description: Reset for the RTEST registers + reset-names: + items: + - const: rtc + - const: rtest + required: + - reset-names + additionalProperties: false examples: @@ -81,4 +116,5 @@ examples: clock-names = "bus", "counter"; power-domains = <&cpg>; resets = <&cpg R9A08G045_VBAT_BRESETN>; + reset-names = "vbattb"; }; diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml index b243afa69a1aeb..167ddcbd880058 100644 --- a/Documentation/devicetree/bindings/serial/8250.yaml +++ b/Documentation/devicetree/bindings/serial/8250.yaml @@ -125,6 +125,8 @@ properties: - nxp,lpc1850-uart - opencores,uart16550-rtlsvn105 - ti,da830-uart + - loongson,ls2k0500-uart + - loongson,ls2k1500-uart - const: ns16550a - items: - enum: @@ -169,6 +171,18 @@ properties: - nvidia,tegra194-uart - nvidia,tegra234-uart - const: nvidia,tegra20-uart + - items: + - enum: + - loongson,ls2k1000-uart + - const: loongson,ls2k0500-uart + - const: ns16550a + - items: + - enum: + - loongson,ls3a5000-uart + - loongson,ls3a6000-uart + - loongson,ls2k2000-uart + - const: loongson,ls2k1500-uart + - const: ns16550a reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uart.yaml b/Documentation/devicetree/bindings/serial/qcom,msm-uart.yaml index ea6abfe2d95e5e..bc2e4875480521 100644 --- a/Documentation/devicetree/bindings/serial/qcom,msm-uart.yaml +++ b/Documentation/devicetree/bindings/serial/qcom,msm-uart.yaml @@ -8,7 +8,7 @@ title: Qualcomm MSM SoC Serial UART maintainers: - Bjorn Andersson - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: The MSM serial UART hardware is designed for low-speed use cases where a diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml index e0fa363ad7e2e5..788ef5c1c4469b 100644 --- a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml +++ b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml @@ -9,7 +9,7 @@ title: Qualcomm MSM Serial UARTDM maintainers: - Andy Gross - Bjorn Andersson - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: | The MSM serial UARTDM hardware is designed for high-speed use cases where the diff --git a/Documentation/devicetree/bindings/serial/renesas,rsci.yaml b/Documentation/devicetree/bindings/serial/renesas,rsci.yaml index f50d8e02f47643..6b1f827a335b37 100644 --- a/Documentation/devicetree/bindings/serial/renesas,rsci.yaml +++ b/Documentation/devicetree/bindings/serial/renesas,rsci.yaml @@ -54,8 +54,6 @@ properties: power-domains: maxItems: 1 - uart-has-rtscts: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index 1a1f991d536491..75ac2a08f2576c 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -48,7 +48,9 @@ properties: - const: samsung,exynos850-uart - items: - enum: + - axis,artpec9-uart - samsung,exynos7870-uart + - samsung,exynos8890-uart - const: samsung,exynos8895-uart reg: diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml index cb9da6c97afcfd..6efe43089a74d3 100644 --- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml +++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml @@ -51,6 +51,7 @@ properties: - const: renesas,rzn1-uart - items: - enum: + - anlogic,dr1v90-uart - brcm,bcm11351-dw-apb-uart - brcm,bcm21664-dw-apb-uart - rockchip,px30-uart @@ -64,6 +65,7 @@ properties: - rockchip,rk3328-uart - rockchip,rk3368-uart - rockchip,rk3399-uart + - rockchip,rk3506-uart - rockchip,rk3528-uart - rockchip,rk3562-uart - rockchip,rk3568-uart diff --git a/Documentation/devicetree/bindings/slimbus/qcom,slim-ngd.yaml b/Documentation/devicetree/bindings/slimbus/qcom,slim-ngd.yaml index abf61c15246eb6..27a92b79c7241a 100644 --- a/Documentation/devicetree/bindings/slimbus/qcom,slim-ngd.yaml +++ b/Documentation/devicetree/bindings/slimbus/qcom,slim-ngd.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm SoC SLIMBus Non Generic Device (NGD) Controller maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski - Srinivas Kandagatla description: diff --git a/Documentation/devicetree/bindings/slimbus/slimbus.yaml b/Documentation/devicetree/bindings/slimbus/slimbus.yaml index 89017d9cda1093..5a941610ce4edd 100644 --- a/Documentation/devicetree/bindings/slimbus/slimbus.yaml +++ b/Documentation/devicetree/bindings/slimbus/slimbus.yaml @@ -75,16 +75,22 @@ examples: #size-cells = <1>; ranges; - slim@28080000 { + controller@28080000 { compatible = "qcom,slim-ngd-v1.5.0"; reg = <0x091c0000 0x2c000>; interrupts = ; - #address-cells = <2>; + dmas = <&slimbam 3>, <&slimbam 4>; + dma-names = "rx", "tx"; + #address-cells = <1>; #size-cells = <0>; - - audio-codec@1,0 { + slim@1 { + reg = <1>; + #address-cells = <2>; + #size-cells = <0>; + codec@1,0 { compatible = "slim217,1a0"; reg = <1 0>; + }; }; + }; }; - }; diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml index e28ef198a801c4..039c8e4a4c51b3 100644 --- a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml +++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml @@ -13,23 +13,21 @@ description: | maintainers: - Nicolas Saenz Julienne -allOf: - - $ref: /schemas/watchdog/watchdog.yaml# - properties: compatible: items: - enum: - brcm,bcm2835-pm - brcm,bcm2711-pm + - brcm,bcm2712-pm - const: brcm,bcm2835-pm-wdt reg: - minItems: 2 + minItems: 1 maxItems: 3 reg-names: - minItems: 2 + minItems: 1 items: - const: pm - const: asb @@ -62,7 +60,35 @@ required: - reg - "#power-domain-cells" - "#reset-cells" - - clocks + +allOf: + - $ref: /schemas/watchdog/watchdog.yaml# + + - if: + properties: + compatible: + contains: + enum: + - brcm,bcm2835-pm + - brcm,bcm2711-pm + then: + required: + - clocks + + properties: + reg: + minItems: 2 + + reg-names: + minItems: 2 + + else: + properties: + reg: + maxItems: 1 + + reg-names: + maxItems: 1 additionalProperties: false diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml index cf0f38dbbe0da5..2c06d869fdb5f6 100644 --- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml @@ -30,7 +30,6 @@ properties: $ref: /schemas/types.yaml#/definitions/string enum: [host, slave] - patternProperties: '^data\-only@[a-f0-9]+$': type: object diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml index b77ce8c6a935e5..721a67e84c137a 100644 --- a/Documentation/devicetree/bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml @@ -51,6 +51,22 @@ properties: type: object $ref: /schemas/mux/reg-mux.yaml +patternProperties: + "^ipu[12]_csi[01]_mux$": + type: object + $ref: /schemas/media/video-mux.yaml + +allOf: + - if: + properties: + compatible: + not: + contains: + const: fsl,imx6q-iomuxc-gpr + then: + patternProperties: + '^ipu[12]_csi[01]_mux$': false + additionalProperties: false required: diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml index a10326a9683d62..5267cfe92572dd 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml @@ -91,7 +91,6 @@ allOf: required: - clocks - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml index 54c0cd64d30946..e7c4a3984c601f 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml @@ -52,6 +52,7 @@ properties: - items: - enum: - mediatek,mt8188-pwrap + - mediatek,mt8189-pwrap - const: mediatek,mt8195-pwrap - const: syscon diff --git a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml index 2c7275c4503b54..668b943db17321 100644 --- a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml +++ b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml @@ -57,7 +57,7 @@ properties: const: 0 patternProperties: - "^timer@[0-2]$": + '^timer@[0-2]$': description: The timer block channels that are used as timers or counters. type: object additionalProperties: false @@ -80,7 +80,7 @@ patternProperties: - compatible - reg - "^pwm@[0-2]$": + '^pwm@[0-2]$': description: The timer block channels that are used as PWMs. $ref: /schemas/pwm/pwm.yaml# type: object @@ -92,7 +92,7 @@ patternProperties: TCB channel to use for this PWM. enum: [ 0, 1, 2 ] - "#pwm-cells": + '#pwm-cells': description: The only third cell flag supported by this binding is PWM_POLARITY_INVERTED. @@ -101,11 +101,10 @@ patternProperties: required: - compatible - reg - - "#pwm-cells" + - '#pwm-cells' additionalProperties: false - allOf: - if: properties: diff --git a/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-mss-top-sysreg.yaml b/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-mss-top-sysreg.yaml new file mode 100644 index 00000000000000..39987f72241184 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-mss-top-sysreg.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/microchip/microchip,mpfs-mss-top-sysreg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PolarFire SoC Microprocessor Subsystem (MSS) sysreg register region + +maintainers: + - Conor Dooley + +description: + An wide assortment of registers that control elements of the MSS on PolarFire + SoC, including pinmuxing, resets and clocks among others. + +properties: + compatible: + items: + - const: microchip,mpfs-mss-top-sysreg + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + '#reset-cells': + description: + The AHB/AXI peripherals on the PolarFire SoC have reset support, so + from CLK_ENVM to CLK_CFM. The reset consumer should specify the + desired peripheral via the clock ID in its "resets" phandle cell. + See include/dt-bindings/clock/microchip,mpfs-clock.h for the full list + of PolarFire clock/reset IDs. + const: 1 + + pinctrl@200: + type: object + $ref: /schemas/pinctrl/microchip,mpfs-pinctrl-iomux0.yaml + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + syscon@20002000 { + compatible = "microchip,mpfs-mss-top-sysreg", "syscon", "simple-mfd"; + reg = <0x20002000 0x1000>; + #reset-cells = <1>; + }; + diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml index 851a1260f8dc8e..c5c1bac2db013a 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml @@ -25,6 +25,8 @@ properties: compatible: items: - enum: + - qcom,glymur-aoss-qmp + - qcom,kaanapali-aoss-qmp - qcom,milos-aoss-qmp - qcom,qcs615-aoss-qmp - qcom,qcs8300-aoss-qmp diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml index c33704333e495a..d9f6d34a61c64e 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml @@ -9,7 +9,7 @@ title: Qualcomm General Serial Bus Interface (GSBI) maintainers: - Andy Gross - Bjorn Andersson - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: The GSBI controller is modeled as a node with zero or more child nodes, each diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml index d9fabefc8147b2..b667f4afdb5527 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml @@ -9,7 +9,7 @@ title: Qualcomm Shared Memory Driver maintainers: - Andy Gross - Bjorn Andersson - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: The Qualcomm Shared Memory Driver is a FIFO based communication channel for diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml index 1ba1d419e83bbb..f912768228586b 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml @@ -9,7 +9,7 @@ title: Qualcomm Shared Memory Point 2 Point maintainers: - Andy Gross - Bjorn Andersson - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: The Shared Memory Point to Point (SMP2P) protocol facilitates communication diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml index 4900215f26af76..67d4a7cb9eeb3e 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml @@ -9,7 +9,7 @@ title: Qualcomm Shared Memory State Machine maintainers: - Andy Gross - Bjorn Andersson - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: The Shared Memory State Machine facilitates broadcasting of single bit state diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml index dca5e27b823305..0b8e3294c83e8a 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml @@ -317,7 +317,6 @@ allOf: properties: clocks: false - examples: - | #include diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml index f0fb24156da9b8..6de47489ee42f4 100644 --- a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml @@ -55,6 +55,7 @@ properties: - samsung,exynos2200-pmu - samsung,exynos7870-pmu - samsung,exynos7885-pmu + - samsung,exynos8890-pmu - samsung,exynos8895-pmu - samsung,exynos9810-pmu - samsung,exynos990-pmu @@ -172,6 +173,7 @@ allOf: - samsung,exynos5250-pmu - samsung,exynos5420-pmu - samsung,exynos5433-pmu + - samsung,exynos7870-pmu then: properties: mipi-phy: true diff --git a/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml b/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml index d8b302f975474a..5e1e155510b3b1 100644 --- a/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml @@ -15,7 +15,9 @@ properties: - items: - enum: - google,gs101-apm-sysreg + - google,gs101-hsi0-sysreg - google,gs101-hsi2-sysreg + - google,gs101-misc-sysreg - google,gs101-peric0-sysreg - google,gs101-peric1-sysreg - samsung,exynos2200-cmgp-sysreg @@ -26,10 +28,14 @@ properties: - samsung,exynos3-sysreg - samsung,exynos4-sysreg - samsung,exynos5-sysreg + - samsung,exynos7870-cam0-sysreg + - samsung,exynos7870-disp-sysreg - samsung,exynos8895-fsys0-sysreg - samsung,exynos8895-fsys1-sysreg - samsung,exynos8895-peric0-sysreg - samsung,exynos8895-peric1-sysreg + - samsung,exynos990-peric0-sysreg + - samsung,exynos990-peric1-sysreg - samsung,exynosautov920-hsi2-sysreg - samsung,exynosautov920-peric0-sysreg - samsung,exynosautov920-peric1-sysreg @@ -73,6 +79,9 @@ properties: clocks: maxItems: 1 + power-domains: + maxItems: 1 + required: - compatible - reg @@ -83,7 +92,9 @@ allOf: compatible: contains: enum: + - google,gs101-hsi0-sysreg - google,gs101-hsi2-sysreg + - google,gs101-misc-sysreg - google,gs101-peric0-sysreg - google,gs101-peric1-sysreg - samsung,exynos850-cmgp-sysreg @@ -93,6 +104,8 @@ allOf: - samsung,exynos8895-fsys1-sysreg - samsung,exynos8895-peric0-sysreg - samsung,exynos8895-peric1-sysreg + - samsung,exynos990-peric0-sysreg + - samsung,exynos990-peric1-sysreg then: required: - clocks @@ -100,6 +113,16 @@ allOf: properties: clocks: false + - if: + properties: + compatible: + not: + contains: + pattern: "^google,gs101-[^-]+-sysreg$" + then: + properties: + power-domains: false + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/soc/sophgo/sophgo,cv1800b-top-syscon.yaml b/Documentation/devicetree/bindings/soc/sophgo/sophgo,cv1800b-top-syscon.yaml new file mode 100644 index 00000000000000..b2e8e0cb4ea6f4 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/sophgo/sophgo,cv1800b-top-syscon.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/sophgo/sophgo,cv1800b-top-syscon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sophgo CV18XX/SG200X SoC top system controller + +maintainers: + - Inochi Amaoto + +description: + The Sophgo CV18XX/SG200X SoC top misc system controller provides + register access to configure related modules. + +properties: + compatible: + oneOf: + - items: + - const: sophgo,cv1800b-top-syscon + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + + dma-router@154: + $ref: /schemas/dma/sophgo,cv1800b-dmamux.yaml# + unevaluatedProperties: false + + phy@48: + $ref: /schemas/phy/sophgo,cv1800b-usb2-phy.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include + + syscon@3000000 { + compatible = "sophgo,cv1800b-top-syscon", "syscon", "simple-mfd"; + reg = <0x03000000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + phy@48 { + compatible = "sophgo,cv1800b-usb2-phy"; + reg = <0x48 0x4>; + #phy-cells = <0>; + clocks = <&clk CLK_USB_125M>, + <&clk CLK_USB_33K>, + <&clk CLK_USB_12M>; + clock-names = "app", "stb", "lpm"; + resets = <&rst 58>; + }; + + dma-router@154 { + compatible = "sophgo,cv1800b-dmamux"; + reg = <0x154 0x8>, <0x298 0x4>; + #dma-cells = <2>; + dma-masters = <&dmac>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml index 7140c312d8986b..f516960dbbefba 100644 --- a/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml +++ b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml @@ -133,12 +133,12 @@ properties: property. The supported-hw is a bitfield indicating SoC speedo or process ID mask. - "#power-domain-cells": + '#power-domain-cells': const: 0 required: - operating-points-v2 - - "#power-domain-cells" + - '#power-domain-cells' i2c-thermtrip: type: object @@ -220,7 +220,7 @@ properties: xusbc USB Partition C Tegra114/124/210 patternProperties: - "^[a-z0-9]+$": + '^[a-z0-9]+$': type: object additionalProperties: false properties: @@ -365,9 +365,9 @@ allOf: additionalProperties: false dependencies: - nvidia,suspend-mode: ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"] - nvidia,core-pwr-off-time: ["nvidia,core-pwr-good-time"] - nvidia,cpu-pwr-off-time: ["nvidia,cpu-pwr-good-time"] + nvidia,suspend-mode: ['nvidia,core-pwr-off-time', 'nvidia,cpu-pwr-off-time'] + nvidia,core-pwr-off-time: ['nvidia,core-pwr-good-time'] + nvidia,cpu-pwr-off-time: ['nvidia,cpu-pwr-good-time'] examples: - | diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml index b5336bcbfb01a1..d97e88433d2fb0 100644 --- a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml +++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml @@ -11,7 +11,6 @@ maintainers: - Suman Anna description: |+ - The Programmable Real-Time Unit and Industrial Communication Subsystem (PRU-ICSS a.k.a. PRUSS) is present on various TI SoCs such as AM335x, AM437x, Keystone 66AK2G, OMAP-L138/DA850 etc. A PRUSS consists of dual 32-bit RISC @@ -44,7 +43,6 @@ description: |+ integration within the IP and the SoC. These nodes are described in the following sections. - PRU-ICSS Node ============== Each PRU-ICSS instance is represented as its own node with the individual PRU @@ -54,7 +52,6 @@ description: |+ See ../../mfd/syscon.yaml for generic SysCon binding details. - properties: $nodename: pattern: "^(pruss|icssg)@[0-9a-f]+$" diff --git a/Documentation/devicetree/bindings/sound/adi,adau1372.yaml b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml index ea62e51aba90ba..9a7ff50a0a22d1 100644 --- a/Documentation/devicetree/bindings/sound/adi,adau1372.yaml +++ b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml @@ -4,7 +4,6 @@ $id: http://devicetree.org/schemas/sound/adi,adau1372.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# - title: Analog Devices ADAU1372 CODEC maintainers: diff --git a/Documentation/devicetree/bindings/sound/adi,adau7002.yaml b/Documentation/devicetree/bindings/sound/adi,adau7002.yaml index fcca0fde7d8663..7858f3f8ec2f6c 100644 --- a/Documentation/devicetree/bindings/sound/adi,adau7002.yaml +++ b/Documentation/devicetree/bindings/sound/adi,adau7002.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Analog Devices ADAU7002 Stereo PDM-to-I2S/TDM Converter maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski allOf: - $ref: dai-common.yaml# diff --git a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml index 12f60507aed7d4..11f59c29b5751f 100644 --- a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml +++ b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml @@ -4,7 +4,6 @@ $id: http://devicetree.org/schemas/sound/adi,adau7118.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# - title: Analog Devices ADAU7118 8 Channel PDM to I2S/TDM Converter maintainers: diff --git a/Documentation/devicetree/bindings/sound/adi,max98363.yaml b/Documentation/devicetree/bindings/sound/adi,max98363.yaml deleted file mode 100644 index c388cda560113b..00000000000000 --- a/Documentation/devicetree/bindings/sound/adi,max98363.yaml +++ /dev/null @@ -1,60 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/adi,max98363.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Analog Devices MAX98363 SoundWire Amplifier - -maintainers: - - Ryan Lee - -description: - The MAX98363 is a SoundWire input Class D mono amplifier that - supports MIPI SoundWire v1.2-compatible digital interface for - audio and control data. - SoundWire peripheral device ID of MAX98363 is 0x3*019f836300 - where * is the peripheral device unique ID decoded from pin. - It supports up to 10 peripheral devices(0x0 to 0x9). - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: sdw3019f836300 - - reg: - maxItems: 1 - - '#sound-dai-cells': - const: 0 - -required: - - compatible - - reg - - "#sound-dai-cells" - -unevaluatedProperties: false - -examples: - - | - soundwire@3250000 { - #address-cells = <2>; - #size-cells = <0>; - reg = <0x3250000 0x2000>; - - speaker@0,0 { - compatible = "sdw3019f836300"; - reg = <0 0>; - #sound-dai-cells = <0>; - sound-name-prefix = "Speaker Left"; - }; - - speaker@0,1 { - compatible = "sdw3019f836300"; - reg = <0 1>; - #sound-dai-cells = <0>; - sound-name-prefix = "Speaker Right"; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/adi,ssm2602.txt b/Documentation/devicetree/bindings/sound/adi,ssm2602.txt deleted file mode 100644 index 3b3302fe399b95..00000000000000 --- a/Documentation/devicetree/bindings/sound/adi,ssm2602.txt +++ /dev/null @@ -1,19 +0,0 @@ -Analog Devices SSM2602, SSM2603 and SSM2604 I2S audio CODEC devices - -SSM2602 support both I2C and SPI as the configuration interface, -the selection is made by the MODE strap-in pin. -SSM2603 and SSM2604 only support I2C as the configuration interface. - -Required properties: - - - compatible : One of "adi,ssm2602", "adi,ssm2603" or "adi,ssm2604" - - - reg : the I2C address of the device for I2C, the chip select - number for SPI. - - Example: - - ssm2602: ssm2602@1a { - compatible = "adi,ssm2602"; - reg = <0x1a>; - }; diff --git a/Documentation/devicetree/bindings/sound/adi,ssm3515.yaml b/Documentation/devicetree/bindings/sound/adi,ssm3515.yaml deleted file mode 100644 index 144450df586955..00000000000000 --- a/Documentation/devicetree/bindings/sound/adi,ssm3515.yaml +++ /dev/null @@ -1,49 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/adi,ssm3515.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Analog Devices SSM3515 Audio Amplifier - -maintainers: - - Martin Povišer - -description: | - SSM3515 is a mono Class-D audio amplifier with digital input. - - https://www.analog.com/media/en/technical-documentation/data-sheets/SSM3515.pdf - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - enum: - - adi,ssm3515 - - reg: - maxItems: 1 - - '#sound-dai-cells': - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - codec@14 { - compatible = "adi,ssm3515"; - reg = <0x14>; - #sound-dai-cells = <0>; - sound-name-prefix = "Left Tweeter"; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml index 739114fb654973..ae86cb5f0a7465 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml @@ -33,7 +33,9 @@ properties: - const: allwinner,sun50i-h6-i2s - const: allwinner,sun50i-r329-i2s - items: - - const: allwinner,sun20i-d1-i2s + - enum: + - allwinner,sun20i-d1-i2s + - allwinner,sun55i-a523-i2s - const: allwinner,sun50i-r329-i2s reg: diff --git a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml index aa32dc950e72cc..1d089ba70f45e4 100644 --- a/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml +++ b/Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml @@ -23,6 +23,7 @@ properties: - const: allwinner,sun8i-h3-spdif - const: allwinner,sun50i-h6-spdif - const: allwinner,sun50i-h616-spdif + - const: allwinner,sun55i-a523-spdif - items: - const: allwinner,sun8i-a83t-spdif - const: allwinner,sun8i-h3-spdif @@ -37,14 +38,12 @@ properties: maxItems: 1 clocks: - items: - - description: Bus Clock - - description: Module Clock + minItems: 2 + maxItems: 3 clock-names: - items: - - const: apb - - const: spdif + minItems: 2 + maxItems: 3 # Even though it only applies to subschemas under the conditionals, # not listing them here will trigger a warning because of the @@ -65,6 +64,7 @@ allOf: - allwinner,sun8i-h3-spdif - allwinner,sun50i-h6-spdif - allwinner,sun50i-h616-spdif + - allwinner,sun55i-a523-spdif then: required: @@ -98,6 +98,38 @@ allOf: - const: rx - const: tx + - if: + properties: + compatible: + contains: + enum: + - allwinner,sun55i-a523-spdif + + then: + properties: + clocks: + items: + - description: Bus Clock + - description: TX Clock + - description: RX Clock + + clock-names: + items: + - const: apb + - const: tx + - const: rx + else: + properties: + clocks: + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + items: + - const: apb + - const: spdif + required: - "#sound-dai-cells" - compatible diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs4271.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs4271.yaml index 68fbf5cc208f5b..d286eb1699159f 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs4271.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs4271.yaml @@ -25,6 +25,16 @@ properties: reg: maxItems: 1 + clocks: + items: + - description: + Master clock connected to the MCLK pin if MCLK is an input (i.e. no + crystal used). + + clock-names: + items: + - const: mclk + spi-cpha: true spi-cpol: true diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs42xx8.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs42xx8.yaml index cd47905eb20a79..7ae72bd901f4da 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs42xx8.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs42xx8.yaml @@ -9,6 +9,9 @@ title: Cirrus Logic CS42448/CS42888 audio CODEC maintainers: - patches@opensource.cirrus.com +allOf: + - $ref: dai-common.yaml# + properties: compatible: enum: @@ -63,7 +66,7 @@ then: - VLC-supply - VLS-supply -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs530x.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs530x.yaml index 9582eb8eb418bc..7600fff0e3b71b 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,cs530x.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,cs530x.yaml @@ -15,10 +15,15 @@ description: allOf: - $ref: dai-common.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# properties: compatible: enum: + - cirrus,cs4282 + - cirrus,cs4302 + - cirrus,cs4304 + - cirrus,cs4308 - cirrus,cs5302 - cirrus,cs5304 - cirrus,cs5308 @@ -26,6 +31,9 @@ properties: reg: maxItems: 1 + spi-max-frequency: + maximum: 24000000 + '#sound-dai-cells': const: 1 diff --git a/Documentation/devicetree/bindings/sound/cix,sky1-ipbloq-hda.yaml b/Documentation/devicetree/bindings/sound/cix,sky1-ipbloq-hda.yaml new file mode 100644 index 00000000000000..02ac5f1aa926c2 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cix,sky1-ipbloq-hda.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/cix,sky1-ipbloq-hda.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: CIX IPBLOQ HDA controller + +description: + CIX IPBLOQ High Definition Audio (HDA) Controller + +maintainers: + - Joakim Zhang + +allOf: + - $ref: sound-card-common.yaml# + +properties: + compatible: + const: cix,sky1-ipbloq-hda + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: ipg + - const: per + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + +unevaluatedProperties: false + +examples: + - | + #include + + hda@70c0000 { + compatible = "cix,sky1-ipbloq-hda"; + reg = <0x70c0000 0x10000>; + interrupts = ; + clocks = <&audss_clk 7>, + <&audss_clk 8>; + clock-names = "ipg", "per"; + resets = <&audss_rst 14>; + model = "CIX SKY1 EVB HDA"; + }; diff --git a/Documentation/devicetree/bindings/sound/cs4265.txt b/Documentation/devicetree/bindings/sound/cs4265.txt deleted file mode 100644 index 380fff8e4e8323..00000000000000 --- a/Documentation/devicetree/bindings/sound/cs4265.txt +++ /dev/null @@ -1,29 +0,0 @@ -CS4265 audio CODEC - -This device supports I2C only. - -Required properties: - - - compatible : "cirrus,cs4265" - - - reg : the I2C address of the device for I2C. The I2C address depends on - the state of the AD0 pin. If AD0 is high, the i2c address is 0x4f. - If it is low, the i2c address is 0x4e. - -Optional properties: - - - reset-gpios : a GPIO spec for the reset pin. If specified, it will be - deasserted before communication to the codec starts. - -Examples: - -codec_ad0_high: cs4265@4f { /* AD0 Pin is high */ - compatible = "cirrus,cs4265"; - reg = <0x4f>; -}; - - -codec_ad0_low: cs4265@4e { /* AD0 Pin is low */ - compatible = "cirrus,cs4265"; - reg = <0x4e>; -}; diff --git a/Documentation/devicetree/bindings/sound/cs4341.txt b/Documentation/devicetree/bindings/sound/cs4341.txt deleted file mode 100644 index c1d5c8ad1a36a5..00000000000000 --- a/Documentation/devicetree/bindings/sound/cs4341.txt +++ /dev/null @@ -1,22 +0,0 @@ -Cirrus Logic CS4341 audio DAC - -This device supports both I2C and SPI (configured with pin strapping -on the board). - -Required properties: - - compatible: "cirrus,cs4341a" - - reg : the I2C address of the device for I2C, the chip select - number for SPI. - -For required properties on I2C-bus, please consult -dtschema schemas/i2c/i2c-controller.yaml -For required properties on SPI-bus, please consult -Documentation/devicetree/bindings/spi/spi-bus.txt - -Example: - codec: cs4341@0 { - #sound-dai-cells = <0>; - compatible = "cirrus,cs4341a"; - reg = <0>; - spi-max-frequency = <6000000>; - }; diff --git a/Documentation/devicetree/bindings/sound/cs4349.txt b/Documentation/devicetree/bindings/sound/cs4349.txt deleted file mode 100644 index 54c117b59dba54..00000000000000 --- a/Documentation/devicetree/bindings/sound/cs4349.txt +++ /dev/null @@ -1,19 +0,0 @@ -CS4349 audio CODEC - -Required properties: - - - compatible : "cirrus,cs4349" - - - reg : the I2C address of the device for I2C - -Optional properties: - - - reset-gpios : a GPIO spec for the reset pin. - -Example: - -codec: cs4349@48 { - compatible = "cirrus,cs4349"; - reg = <0x48>; - reset-gpios = <&gpio 54 0>; -}; diff --git a/Documentation/devicetree/bindings/sound/da9055.txt b/Documentation/devicetree/bindings/sound/da9055.txt deleted file mode 100644 index 75c6338b6ae280..00000000000000 --- a/Documentation/devicetree/bindings/sound/da9055.txt +++ /dev/null @@ -1,22 +0,0 @@ -* Dialog DA9055 Audio CODEC - -DA9055 provides Audio CODEC support (I2C only). - -The Audio CODEC device in DA9055 has its own I2C address which is configurable, -so the device is instantiated separately from the PMIC (MFD) device. - -For details on accompanying PMIC I2C device, see the following: -Documentation/devicetree/bindings/mfd/da9055.txt - -Required properties: - - - compatible: "dlg,da9055-codec" - - reg: Specifies the I2C slave address - - -Example: - - codec: da9055-codec@1a { - compatible = "dlg,da9055-codec"; - reg = <0x1a>; - }; diff --git a/Documentation/devicetree/bindings/sound/maxim,max98090.yaml b/Documentation/devicetree/bindings/sound/maxim,max98090.yaml index 65e4c516912ff5..9df1296aacb771 100644 --- a/Documentation/devicetree/bindings/sound/maxim,max98090.yaml +++ b/Documentation/devicetree/bindings/sound/maxim,max98090.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Maxim Integrated MAX98090/MAX98091 audio codecs maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: | Pins on the device (for linking into audio routes): diff --git a/Documentation/devicetree/bindings/sound/maxim,max98095.yaml b/Documentation/devicetree/bindings/sound/maxim,max98095.yaml index 77544a9e1587f5..76ea4fe711def0 100644 --- a/Documentation/devicetree/bindings/sound/maxim,max98095.yaml +++ b/Documentation/devicetree/bindings/sound/maxim,max98095.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Maxim Integrated MAX98095 audio codec maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski allOf: - $ref: dai-common.yaml# diff --git a/Documentation/devicetree/bindings/sound/maxim,max98504.yaml b/Documentation/devicetree/bindings/sound/maxim,max98504.yaml index 23f19a9d2c06e2..6d33bb4a98aeab 100644 --- a/Documentation/devicetree/bindings/sound/maxim,max98504.yaml +++ b/Documentation/devicetree/bindings/sound/maxim,max98504.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Maxim Integrated MAX98504 class D mono speaker amplifier maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: Maxim Integrated MAX98504 speaker amplifier supports I2C control interface diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8189-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8189-afe-pcm.yaml new file mode 100644 index 00000000000000..9c9f21652af9f2 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mediatek,mt8189-afe-pcm.yaml @@ -0,0 +1,178 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/mediatek,mt8189-afe-pcm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Audio Front End PCM controller for MT8189 + +maintainers: + - Darren Ye + - Cyril Chao + +properties: + compatible: + const: mediatek,mt8189-afe-pcm + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + memory-region: + maxItems: 1 + + mediatek,apmixedsys: + $ref: /schemas/types.yaml#/definitions/phandle + description: To set up the apll12 tuner + + power-domains: + maxItems: 1 + + clocks: + items: + - description: mux for audio intbus + - description: mux for audio engen1 + - description: mux for audio engen2 + - description: mux for audio h + - description: audio apll1 clock + - description: audio apll2 clock + - description: audio apll1 divide4 + - description: audio apll2 divide4 + - description: audio apll12 divide for i2sin0 + - description: audio apll12 divide for i2sin1 + - description: audio apll12 divide for i2sout0 + - description: audio apll12 divide for i2sout1 + - description: audio apll12 divide for fmi2s + - description: audio apll12 divide for tdmout mck + - description: audio apll12 divide for tdmout bck + - description: mux for audio apll1 + - description: mux for audio apll2 + - description: mux for i2sin0 mck + - description: mux for i2sin1 mck + - description: mux for i2sout0 mck + - description: mux for i2sout1 mck + - description: mux for fmi2s mck + - description: mux for tdmout mck + - description: 26m clock + - description: audio slv clock + - description: audio mst clock + - description: audio intbus clock + + clock-names: + items: + - const: top_aud_intbus + - const: top_aud_eng1 + - const: top_aud_eng2 + - const: top_aud_h + - const: apll1 + - const: apll2 + - const: apll1_d4 + - const: apll2_d4 + - const: apll12_div_i2sin0 + - const: apll12_div_i2sin1 + - const: apll12_div_i2sout0 + - const: apll12_div_i2sout1 + - const: apll12_div_fmi2s + - const: apll12_div_tdmout_m + - const: apll12_div_tdmout_b + - const: top_apll1 + - const: top_apll2 + - const: top_i2sin0 + - const: top_i2sin1 + - const: top_i2sout0 + - const: top_i2sout1 + - const: top_fmi2s + - const: top_dptx + - const: clk26m + - const: aud_slv_ck_peri + - const: aud_mst_ck_peri + - const: aud_intbus_ck_peri + +required: + - compatible + - reg + - interrupts + - memory-region + - power-domains + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + #include + + soc { + #address-cells = <2>; + #size-cells = <2>; + + afe@11050000 { + compatible = "mediatek,mt8189-afe-pcm"; + reg = <0 0x11050000 0 0x10000>; + interrupts = ; + memory-region = <&afe_dma_mem_reserved>; + pinctrl-names = "default"; + pinctrl-0 = <&aud_pins_default>; + power-domains = <&scpsys 1>; //MT8189_POWER_DOMAIN_AUDIO + clocks = <&topckgen_clk 23>, //CLK_TOP_AUD_INTBUS_SEL + <&topckgen_clk 39>, //CLK_TOP_AUD_ENGEN1_SEL + <&topckgen_clk 40>, //CLK_TOP_AUD_ENGEN2_SEL + <&topckgen_clk 49>, //CLK_TOP_AUDIO_H_SEL + <&topckgen_clk 146>, //CLK_TOP_APLL1 + <&topckgen_clk 151>, //CLK_TOP_APLL2 + <&topckgen_clk 148>, //CLK_TOP_APLL1_D4 + <&topckgen_clk 153>, //CLK_TOP_APLL2_D4 + <&topckgen_clk 93>, //CLK_TOP_APLL12_CK_DIV_I2SIN0 + <&topckgen_clk 94>, //CLK_TOP_APLL12_CK_DIV_I2SIN1 + <&topckgen_clk 95>, //CLK_TOP_APLL12_CK_DIV_I2SOUT0 + <&topckgen_clk 96>, //CLK_TOP_APLL12_CK_DIV_I2SOUT1 + <&topckgen_clk 97>, //CLK_TOP_APLL12_CK_DIV_FMI2S + <&topckgen_clk 98>, //CLK_TOP_APLL12_CK_DIV_TDMOUT_M + <&topckgen_clk 99>, //CLK_TOP_APLL12_CK_DIV_TDMOUT_B + <&topckgen_clk 44>, //CLK_TOP_AUD_1_SEL + <&topckgen_clk 45>, //CLK_TOP_AUD_2_SEL + <&topckgen_clk 78>, //CLK_TOP_APLL_I2SIN0_MCK_SEL + <&topckgen_clk 79>, //CLK_TOP_APLL_I2SIN1_MCK_SEL + <&topckgen_clk 84>, //CLK_TOP_APLL_I2SOUT0_MCK_SEL + <&topckgen_clk 85>, //CLK_TOP_APLL_I2SOUT1_MCK_SEL + <&topckgen_clk 90>, //CLK_TOP_APLL_FMI2S_MCK_SEL + <&topckgen_clk 91>, //CLK_TOP_APLL_TDMOUT_MCK_SEL + <&topckgen_clk 191>, //CLK_TOP_TCK_26M_MX9 + <&pericfg_ao_clk 77>, //CLK_PERAO_AUDIO0 + <&pericfg_ao_clk 78>, //CLK_PERAO_AUDIO1 + <&pericfg_ao_clk 79>; //CLK_PERAO_AUDIO2 + clock-names = "top_aud_intbus", + "top_aud_eng1", + "top_aud_eng2", + "top_aud_h", + "apll1", + "apll2", + "apll1_d4", + "apll2_d4", + "apll12_div_i2sin0", + "apll12_div_i2sin1", + "apll12_div_i2sout0", + "apll12_div_i2sout1", + "apll12_div_fmi2s", + "apll12_div_tdmout_m", + "apll12_div_tdmout_b", + "top_apll1", + "top_apll2", + "top_i2sin0", + "top_i2sin1", + "top_i2sout0", + "top_i2sout1", + "top_fmi2s", + "top_dptx", + "clk26m", + "aud_slv_ck_peri", + "aud_mst_ck_peri", + "aud_intbus_ck_peri"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt8189-nau8825.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt8189-nau8825.yaml new file mode 100644 index 00000000000000..dd9ee0a3b292ee --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mediatek,mt8189-nau8825.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/mediatek,mt8189-nau8825.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT8189 ASoC sound card + +maintainers: + - Darren Ye + - Cyril Chao + +allOf: + - $ref: sound-card-common.yaml# + +properties: + compatible: + enum: + - mediatek,mt8189-nau8825 + - mediatek,mt8189-rt5650 + - mediatek,mt8189-rt5682s + - mediatek,mt8189-rt5682i + - mediatek,mt8189-es8326 + + mediatek,platform: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of MT8189 ASoC platform. + +patternProperties: + "^dai-link-[0-9]+$": + type: object + description: + Container for dai-link level properties and CODEC sub-nodes. + + properties: + link-name: + description: + This property corresponds to the name of the BE dai-link to which + we are going to update parameters in this node. + enum: + - TDM_DPTX_BE + - I2SOUT0_BE + - I2SIN0_BE + - I2SOUT1_BE + + codec: + description: Holds subnode which indicates codec dai. + type: object + additionalProperties: false + + properties: + sound-dai: + minItems: 1 + maxItems: 2 + required: + - sound-dai + + dai-format: + description: audio format. + enum: + - i2s + - right_j + - left_j + - dsp_a + - dsp_b + + mediatek,clk-provider: + $ref: /schemas/types.yaml#/definitions/string + description: Indicates dai-link clock master. + enum: + - cpu + - codec + + additionalProperties: false + + required: + - link-name + +required: + - compatible + - mediatek,platform + +unevaluatedProperties: false + +examples: + - | + sound { + compatible = "mediatek,mt8189-nau8825"; + model = "mt8189_rt9123_8825"; + mediatek,platform = <&afe>; + dai-link-0 { + link-name = "I2SOUT1_BE"; + dai-format = "i2s"; + mediatek,clk-provider = "cpu"; + codec { + sound-dai = <&nau8825>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8540.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8540.yaml deleted file mode 100644 index 7ccfbb8d8b0433..00000000000000 --- a/Documentation/devicetree/bindings/sound/nuvoton,nau8540.yaml +++ /dev/null @@ -1,40 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/nuvoton,nau8540.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Nuvoton Technology Corporation NAU85L40 Audio CODEC - -maintainers: - - John Hsu - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: nuvoton,nau8540 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec@1c { - compatible = "nuvoton,nau8540"; - reg = <0x1c>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8810.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8810.yaml deleted file mode 100644 index d9696f6c75edd1..00000000000000 --- a/Documentation/devicetree/bindings/sound/nuvoton,nau8810.yaml +++ /dev/null @@ -1,45 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/nuvoton,nau8810.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: NAU8810/NAU8812/NAU8814 audio CODEC - -maintainers: - - David Lin - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - enum: - - nuvoton,nau8810 - - nuvoton,nau8812 - - nuvoton,nau8814 - - reg: - maxItems: 1 - - '#sound-dai-cells': - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - codec@1a { - #sound-dai-cells = <0>; - compatible = "nuvoton,nau8810"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml index b32f33214ba60b..2ce4049f94acc7 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml @@ -67,46 +67,72 @@ properties: $ref: audio-graph-port.yaml# unevaluatedProperties: false -if: - properties: - compatible: - contains: - const: nvidia,tegra210-admaif - -then: - properties: - dmas: - description: - DMA channel specifiers, equally divided for Tx and Rx. - minItems: 1 - maxItems: 20 - dma-names: - items: - pattern: "^[rt]x(10|[1-9])$" - description: - Should be "rx1", "rx2" ... "rx10" for DMA Rx channel - Should be "tx1", "tx2" ... "tx10" for DMA Tx channel - minItems: 1 - maxItems: 20 - interconnects: false - interconnect-names: false - iommus: false - -else: - properties: - dmas: - description: - DMA channel specifiers, equally divided for Tx and Rx. - minItems: 1 - maxItems: 40 - dma-names: - items: - pattern: "^[rt]x(1[0-9]|[1-9]|20)$" - description: - Should be "rx1", "rx2" ... "rx20" for DMA Rx channel - Should be "tx1", "tx2" ... "tx20" for DMA Tx channel - minItems: 1 - maxItems: 40 +allOf: + - if: + properties: + compatible: + contains: + const: nvidia,tegra210-admaif + then: + properties: + dmas: + description: + DMA channel specifiers, equally divided for Tx and Rx. + minItems: 1 + maxItems: 20 + dma-names: + items: + pattern: "^[rt]x(10|[1-9])$" + description: + Should be "rx1", "rx2" ... "rx10" for DMA Rx channel + Should be "tx1", "tx2" ... "tx10" for DMA Tx channel + minItems: 1 + maxItems: 20 + interconnects: false + interconnect-names: false + iommus: false + + - if: + properties: + compatible: + contains: + const: nvidia,tegra186-admaif + then: + properties: + dmas: + description: + DMA channel specifiers, equally divided for Tx and Rx. + minItems: 1 + maxItems: 40 + dma-names: + items: + pattern: "^[rt]x(1[0-9]|[1-9]|20)$" + description: + Should be "rx1", "rx2" ... "rx20" for DMA Rx channel + Should be "tx1", "tx2" ... "tx20" for DMA Tx channel + minItems: 1 + maxItems: 40 + + - if: + properties: + compatible: + contains: + const: nvidia,tegra264-admaif + then: + properties: + dmas: + description: + DMA channel specifiers, equally divided for Tx and Rx. + minItems: 1 + maxItems: 64 + dma-names: + items: + pattern: "^[rt]x(3[0-2]|[1-2][0-9]|[1-9])$" + description: + Should be "rx1", "rx2" ... "rx32" for DMA Rx channel + Should be "tx1", "tx2" ... "tx32" for DMA Tx channel + minItems: 1 + maxItems: 64 required: - compatible diff --git a/Documentation/devicetree/bindings/sound/nxp,tfa9879.yaml b/Documentation/devicetree/bindings/sound/nxp,tfa9879.yaml deleted file mode 100644 index df26248573ad5f..00000000000000 --- a/Documentation/devicetree/bindings/sound/nxp,tfa9879.yaml +++ /dev/null @@ -1,44 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/nxp,tfa9879.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: NXP TFA9879 class-D audio amplifier - -maintainers: - - Peter Rosin - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: nxp,tfa9879 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - - '#sound-dai-cells' - -unevaluatedProperties: false - -examples: - - | - i2c1 { - #address-cells = <1>; - #size-cells = <0>; - amplifier@6c { - compatible = "nxp,tfa9879"; - reg = <0x6c>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - #sound-dai-cells = <0>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/nxp,uda1342.yaml b/Documentation/devicetree/bindings/sound/nxp,uda1342.yaml deleted file mode 100644 index 71c6a5a2f5bc06..00000000000000 --- a/Documentation/devicetree/bindings/sound/nxp,uda1342.yaml +++ /dev/null @@ -1,42 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/nxp,uda1342.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: NXP uda1342 audio CODECs - -maintainers: - - Binbin Zhou - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: nxp,uda1342 - - reg: - maxItems: 1 - - '#sound-dai-cells': - const: 0 - -required: - - compatible - - reg - - '#sound-dai-cells' - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec@1a { - compatible = "nxp,uda1342"; - reg = <0x1a>; - #sound-dai-cells = <0>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/pcm1789.txt b/Documentation/devicetree/bindings/sound/pcm1789.txt deleted file mode 100644 index 3c74ed220ac25e..00000000000000 --- a/Documentation/devicetree/bindings/sound/pcm1789.txt +++ /dev/null @@ -1,22 +0,0 @@ -Texas Instruments pcm1789 DT bindings - -PCM1789 is a simple audio codec that can be connected via -I2C or SPI. Currently, only I2C bus is supported. - -Required properties: - - - compatible: "ti,pcm1789" - -Required properties on I2C: - - - reg: the I2C address - - reset-gpios: GPIO to control the RESET pin - -Examples: - - audio-codec@4c { - compatible = "ti,pcm1789"; - reg = <0x4c>; - reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; - #sound-dai-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/sound/pcm179x.txt b/Documentation/devicetree/bindings/sound/pcm179x.txt deleted file mode 100644 index 436c2b247693f5..00000000000000 --- a/Documentation/devicetree/bindings/sound/pcm179x.txt +++ /dev/null @@ -1,27 +0,0 @@ -Texas Instruments pcm179x DT bindings - -This driver supports both the I2C and SPI bus. - -Required properties: - - - compatible: "ti,pcm1792a" - -For required properties on SPI, please consult -Documentation/devicetree/bindings/spi/spi-bus.txt - -Required properties on I2C: - - - reg: the I2C address - - -Examples: - - codec_spi: 1792a@0 { - compatible = "ti,pcm1792a"; - spi-max-frequency = <600000>; - }; - - codec_i2c: 1792a@4c { - compatible = "ti,pcm1792a"; - reg = <0x4c>; - }; diff --git a/Documentation/devicetree/bindings/sound/pcm186x.txt b/Documentation/devicetree/bindings/sound/pcm186x.txt deleted file mode 100644 index 1087f48559807e..00000000000000 --- a/Documentation/devicetree/bindings/sound/pcm186x.txt +++ /dev/null @@ -1,42 +0,0 @@ -Texas Instruments PCM186x Universal Audio ADC - -These devices support both I2C and SPI (configured with pin strapping -on the board). - -Required properties: - - - compatible : "ti,pcm1862", - "ti,pcm1863", - "ti,pcm1864", - "ti,pcm1865" - - - reg : The I2C address of the device for I2C, the chip select - number for SPI. - - - avdd-supply: Analog core power supply (3.3v) - - dvdd-supply: Digital core power supply - - iovdd-supply: Digital IO power supply - See regulator/regulator.txt for more information - -CODEC input pins: - * VINL1 - * VINR1 - * VINL2 - * VINR2 - * VINL3 - * VINR3 - * VINL4 - * VINR4 - -The pins can be used in referring sound node's audio-routing property. - -Example: - - pcm186x: audio-codec@4a { - compatible = "ti,pcm1865"; - reg = <0x4a>; - - avdd-supply = <®_3v3_analog>; - dvdd-supply = <®_3v3>; - iovdd-supply = <®_1v8>; - }; diff --git a/Documentation/devicetree/bindings/sound/pcm5102a.txt b/Documentation/devicetree/bindings/sound/pcm5102a.txt deleted file mode 100644 index c63ab0b6ee196e..00000000000000 --- a/Documentation/devicetree/bindings/sound/pcm5102a.txt +++ /dev/null @@ -1,13 +0,0 @@ -PCM5102a audio CODECs - -These devices does not use I2C or SPI. - -Required properties: - - - compatible : set as "ti,pcm5102a" - -Examples: - - pcm5102a: pcm5102a { - compatible = "ti,pcm5102a"; - }; diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml index 92f95eb74b1928..2eed2277511f89 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-rx-macro.yaml @@ -14,12 +14,14 @@ properties: oneOf: - enum: - qcom,sc7280-lpass-rx-macro + - qcom,sm6115-lpass-rx-macro - qcom,sm8250-lpass-rx-macro - qcom,sm8450-lpass-rx-macro - qcom,sm8550-lpass-rx-macro - qcom,sc8280xp-lpass-rx-macro - items: - enum: + - qcom,kaanapali-lpass-rx-macro - qcom,sm8650-lpass-rx-macro - qcom,sm8750-lpass-rx-macro - qcom,x1e80100-lpass-rx-macro @@ -80,6 +82,23 @@ allOf: - const: npl - const: fsgen + - if: + properties: + compatible: + enum: + - qcom,sm6115-lpass-rx-macro + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: mclk + - const: npl + - const: dcodec + - const: fsgen + - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml index 914798a898781d..e5e65e226a02df 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-tx-macro.yaml @@ -21,6 +21,7 @@ properties: - qcom,sc8280xp-lpass-tx-macro - items: - enum: + - qcom,kaanapali-lpass-tx-macro - qcom,sm8650-lpass-tx-macro - qcom,sm8750-lpass-tx-macro - qcom,x1e80100-lpass-tx-macro diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml index 1c0d78af3c051f..5c42b2b323ee41 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-va-macro.yaml @@ -14,6 +14,7 @@ properties: oneOf: - enum: - qcom,sc7280-lpass-va-macro + - qcom,sm6115-lpass-va-macro - qcom,sm8250-lpass-va-macro - qcom,sm8450-lpass-va-macro - qcom,sm8550-lpass-va-macro @@ -21,6 +22,7 @@ properties: - items: - enum: - qcom,glymur-lpass-va-macro + - qcom,kaanapali-lpass-va-macro - qcom,sm8650-lpass-va-macro - qcom,sm8750-lpass-va-macro - qcom,x1e80100-lpass-va-macro @@ -41,11 +43,7 @@ properties: clock-names: minItems: 1 - items: - - const: mclk - - const: macro - - const: dcodec - - const: npl + maxItems: 4 clock-output-names: maxItems: 1 @@ -90,29 +88,48 @@ allOf: clocks: maxItems: 1 clock-names: - maxItems: 1 + items: + - const: mclk else: properties: clocks: minItems: 3 maxItems: 3 clock-names: - minItems: 3 - maxItems: 3 - + items: + - const: mclk + - const: macro + - const: dcodec - if: properties: compatible: contains: - const: qcom,sm8250-lpass-va-macro + const: qcom,sm6115-lpass-va-macro then: properties: clocks: minItems: 3 maxItems: 3 clock-names: + items: + - const: mclk + - const: dcodec + - const: npl + - if: + properties: + compatible: + contains: + const: qcom,sm8250-lpass-va-macro + then: + properties: + clocks: minItems: 3 maxItems: 3 + clock-names: + items: + - const: mclk + - const: macro + - const: dcodec - if: properties: @@ -127,8 +144,11 @@ allOf: minItems: 4 maxItems: 4 clock-names: - minItems: 4 - maxItems: 4 + items: + - const: mclk + - const: macro + - const: dcodec + - const: npl - if: properties: @@ -142,8 +162,10 @@ allOf: minItems: 3 maxItems: 3 clock-names: - minItems: 3 - maxItems: 3 + items: + - const: mclk + - const: macro + - const: dcodec unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml index b6f5ba5d1320b5..d5f22b5cf0210b 100644 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-wsa-macro.yaml @@ -21,6 +21,7 @@ properties: - items: - enum: - qcom,glymur-lpass-wsa-macro + - qcom,kaanapali-lpass-wsa-macro - qcom,sm8650-lpass-wsa-macro - qcom,sm8750-lpass-wsa-macro - qcom,x1e80100-lpass-wsa-macro diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm-routing.yaml b/Documentation/devicetree/bindings/sound/qcom,q6adm-routing.yaml index 3f11d2e183e17a..26fe8cc66b3c79 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6adm-routing.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6adm-routing.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Audio Device Manager (Q6ADM) routing maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski - Srinivas Kandagatla description: diff --git a/Documentation/devicetree/bindings/sound/qcom,q6adm.yaml b/Documentation/devicetree/bindings/sound/qcom,q6adm.yaml index fe14a97ea6162e..3c32c5b0fad8e2 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6adm.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6adm.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Audio Device Manager (Q6ADM) maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski - Srinivas Kandagatla allOf: diff --git a/Documentation/devicetree/bindings/sound/qcom,q6afe.yaml b/Documentation/devicetree/bindings/sound/qcom,q6afe.yaml index 268f7073d7972d..4624b3d461d5dc 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6afe.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6afe.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Audio FrontEnd (Q6AFE) maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski - Srinivas Kandagatla allOf: diff --git a/Documentation/devicetree/bindings/sound/qcom,q6apm-lpass-dais.yaml b/Documentation/devicetree/bindings/sound/qcom,q6apm-lpass-dais.yaml index 894e653d37d744..2fb95544db8b5d 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6apm-lpass-dais.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6apm-lpass-dais.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm DSP LPASS (Low Power Audio SubSystem) Audio Ports maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski - Srinivas Kandagatla allOf: diff --git a/Documentation/devicetree/bindings/sound/qcom,q6apm.yaml b/Documentation/devicetree/bindings/sound/qcom,q6apm.yaml index ef1965aca25482..ec06769a2b63a9 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6apm.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6apm.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Audio Process Manager (Q6APM) maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski - Srinivas Kandagatla allOf: diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm-dais.yaml b/Documentation/devicetree/bindings/sound/qcom,q6asm-dais.yaml index ce811942a9f17d..47a105a97ecf97 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6asm-dais.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6asm-dais.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Audio Stream Manager (Q6ASM) maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski - Srinivas Kandagatla description: diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm.yaml b/Documentation/devicetree/bindings/sound/qcom,q6asm.yaml index cb49f9667ccaa0..a6f88ce92299ec 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6asm.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6asm.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Audio Stream Manager (Q6ASM) maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski - Srinivas Kandagatla allOf: diff --git a/Documentation/devicetree/bindings/sound/qcom,q6core.yaml b/Documentation/devicetree/bindings/sound/qcom,q6core.yaml index e240712de9caf9..8642ef9f9142be 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6core.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6core.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Audio Core (Q6Core) maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski - Srinivas Kandagatla allOf: diff --git a/Documentation/devicetree/bindings/sound/qcom,q6prm.yaml b/Documentation/devicetree/bindings/sound/qcom,q6prm.yaml index f6dbb1267bfe76..3eafe189e6992c 100644 --- a/Documentation/devicetree/bindings/sound/qcom,q6prm.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,q6prm.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Proxy Resource Manager (Q6PRM) maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski - Srinivas Kandagatla allOf: diff --git a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml index b49a920af70456..15f38622b98b90 100644 --- a/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,sm8250.yaml @@ -23,6 +23,7 @@ properties: - const: qcom,sdm845-sndcard - items: - enum: + - qcom,kaanapali-sndcard - qcom,sm8550-sndcard - qcom,sm8650-sndcard - qcom,sm8750-sndcard @@ -38,6 +39,7 @@ properties: - qcom,qcs8275-sndcard - qcom,qcs9075-sndcard - qcom,qcs9100-sndcard + - qcom,qrb2210-sndcard - qcom,qrb4210-rb2-sndcard - qcom,qrb5165-rb5-sndcard - qcom,sc7180-qdsp6-sndcard diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml index a65b1d1d5fdd9c..3a7334e41fd651 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml @@ -132,7 +132,7 @@ properties: $ref: /schemas/gpio/qcom,wcd934x-gpio.yaml# patternProperties: - "^.*@[0-9a-f]+$": + "@[0-9a-f]+$": type: object additionalProperties: true description: | diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml index 83e0360301e1d2..866c5e780fb0aa 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wsa8840.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm WSA8840/WSA8845/WSA8845H smart speaker amplifier maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski - Srinivas Kandagatla description: diff --git a/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml b/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml index 7bb6c5dff7865c..9435f395403a54 100644 --- a/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml +++ b/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml @@ -135,7 +135,6 @@ properties: the direction (input/output) needs to be dynamically adjusted. type: boolean - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml index 5cdb8bcc687b08..52e3f1f900c4ef 100644 --- a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml +++ b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml @@ -8,10 +8,10 @@ title: Rockchip rk3328 internal codec maintainers: - Heiko Stuebner + allOf: - $ref: dai-common.yaml# - properties: compatible: const: rockchip,rk3328-codec diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2.yaml b/Documentation/devicetree/bindings/sound/samsung,tm2.yaml index cbc7ba37362a93..67586ba3e0a0fb 100644 --- a/Documentation/devicetree/bindings/sound/samsung,tm2.yaml +++ b/Documentation/devicetree/bindings/sound/samsung,tm2.yaml @@ -30,7 +30,6 @@ properties: - items: - description: Phandle to the HDMI transmitter node. - samsung,audio-routing: description: | List of the connections between audio components; each entry is diff --git a/Documentation/devicetree/bindings/sound/spacemit,k1-i2s.yaml b/Documentation/devicetree/bindings/sound/spacemit,k1-i2s.yaml new file mode 100644 index 00000000000000..55bd0b307d22b3 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/spacemit,k1-i2s.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/spacemit,k1-i2s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: K1 I2S controller + +description: + The I2S bus (Inter-IC sound bus) is a serial link for digital + audio data transfer between devices in the system. + +maintainers: + - Troy Mitchell + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: spacemit,k1-i2s + + reg: + maxItems: 1 + + clocks: + items: + - description: clock for I2S sysclk + - description: clock for I2S bclk + - description: clock for I2S bus + - description: clock for I2S controller + + clock-names: + items: + - const: sysclk + - const: bclk + - const: bus + - const: func + + dmas: + minItems: 1 + maxItems: 2 + + dma-names: + minItems: 1 + items: + - const: tx + - const: rx + + resets: + maxItems: 1 + + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + + "#sound-dai-cells": + const: 0 + +required: + - compatible + - reg + - clocks + - clock-names + - dmas + - dma-names + - resets + - "#sound-dai-cells" + +unevaluatedProperties: false + +examples: + - | + #include + i2s@d4026000 { + compatible = "spacemit,k1-i2s"; + reg = <0xd4026000 0x30>; + clocks = <&syscon_mpmu CLK_I2S_SYSCLK>, + <&syscon_mpmu CLK_I2S_BCLK>, + <&syscon_apbc CLK_SSPA0_BUS>, + <&syscon_apbc CLK_SSPA0>; + clock-names = "sysclk", "bclk", "bus", "func"; + dmas = <&pdma0 21>, <&pdma0 22>; + dma-names = "tx", "rx"; + resets = <&syscon_apbc RESET_SSPA0>; + #sound-dai-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/sound/ti,pcm1862.yaml b/Documentation/devicetree/bindings/sound/ti,pcm1862.yaml new file mode 100644 index 00000000000000..0f0e254a242091 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,pcm1862.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ti,pcm1862.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments PCM186x Universal Audio ADC + +maintainers: + - Ranganath V N + +description: | + The Texas Instruments PCM186x family are multi-channel audio ADCs + that support both I2C and SPI control interfaces, selected by + pin strapping. These devices include on-chip programmable gain + amplifiers and support differential or single-ended analog inputs. + + CODEC input pins: + * VINL1 + * VINR1 + * VINL2 + * VINR2 + * VINL3 + * VINR3 + * VINL4 + * VINR4 + + The pins can be used in referring sound node's audio-routing property. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - ti,pcm1862 + - ti,pcm1863 + - ti,pcm1864 + - ti,pcm1865 + + reg: + maxItems: 1 + + avdd-supply: true + + dvdd-supply: true + + iovdd-supply: true + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + - avdd-supply + - dvdd-supply + - iovdd-supply + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + audio-codec@4a { + compatible = "ti,pcm1865"; + reg = <0x4a>; + + avdd-supply = <®_3v3_analog>; + dvdd-supply = <®_3v3>; + iovdd-supply = <®_1v8>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml index 7f84f506013c3f..f3a5638f4239c5 100644 --- a/Documentation/devicetree/bindings/sound/ti,tas2781.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tas2781.yaml @@ -24,21 +24,26 @@ description: | Instruments Smart Amp speaker protection algorithm. The integrated speaker voltage and current sense provides for real time monitoring of loudspeaker behavior. - The TAS5802/TAS5815/TAS5825/TAS5827/TAS5828 is a stereo, digital input - Class-D audio amplifier optimized for efficiently driving high peak - power into small loudspeakers. An integrated on-chip DSP supports - Texas Instruments Smart Amp speaker protection algorithm. + The TAS5802/TAS5815/TAS5822/TAS5825/TAS5827/TAS5828 is a stereo, + digital input Class-D audio amplifier optimized for efficiently driving + high peak power into small loudspeakers. An integrated on-chip DSP + supports Texas Instruments Smart Amp speaker protection algorithm. Specifications about the audio amplifier can be found at: https://www.ti.com/lit/gpn/tas2120 https://www.ti.com/lit/gpn/tas2320 https://www.ti.com/lit/gpn/tas2563 https://www.ti.com/lit/gpn/tas2572 + https://www.ti.com/lit/gpn/tas2574 https://www.ti.com/lit/gpn/tas2781 + https://www.ti.com/lit/gpn/tas5806m + https://www.ti.com/lit/gpn/tas5806md https://www.ti.com/lit/gpn/tas5815 + https://www.ti.com/lit/gpn/tas5822m https://www.ti.com/lit/gpn/tas5825m https://www.ti.com/lit/gpn/tas5827 https://www.ti.com/lit/gpn/tas5828m + https://www.ti.com/lit/gpn/tas5830 properties: compatible: @@ -57,12 +62,18 @@ properties: ti,tas2563: 6.1-W Boosted Class-D Audio Amplifier With Integrated DSP and IV Sense, 16/20/24/32bit stereo I2S or multichannel TDM. + ti,tas2568: 5.3-W Digital Input Smart Amp with I/V Sense and Integrated + 10.75-V Class-H Boost + ti,tas2570: 5.8-W Digital Input smart amp with I/V sense and integrated 11-V Class-H Boost ti,tas2572: 6.6-W Digital Input smart amp with I/V sense and integrated 13-V Class-H Boost + ti,tas2574: 8.5-W Digital Input smart amp with I/V sense and integrated + 15-V Class-H Boost + ti,tas2781: 24-V Class-D Amplifier with Real Time Integrated Speaker Protection and Audio Processing, 16/20/24/32bit stereo I2S or multichannel TDM. @@ -71,9 +82,20 @@ properties: Audio Amplifier with 96-Khz Extended Processing and Low Idle Power Dissipation. + ti,tas5806m: 23-W, Inductor-Less, Digital Input, Stereo, Closed-Loop + Class-D Audio Amplifier with Enhanced Processing and Low Power + Dissipation. + + ti,tas5806md: 23-W, Inductor-Less, Digital Input, Stereo, Closed-Loop + Class-D Audio Amplifier with Enhanced Processing and DirectPath(TM) + HP Driver + ti,tas5815: 30-W, Digital Input, Stereo, Closed-loop Class-D Audio Amplifier with 96 kHz Enhanced Processing + ti,tas5822: 35-W, Digital Input, Stereo, Closed-Loop Class-D Audio + Amplifier with 96 kHz Enhanced Processing + ti,tas5825: 38-W Stereo, Inductor-Less, Digital Input, Closed-Loop 4.5V to 26.4V Class-D Audio Amplifier with 192-kHz Extended Audio Processing. @@ -82,6 +104,9 @@ properties: ti,tas5828: 50-W Stereo, Digital Input, High Efficiency Closed-Loop Class-D Amplifier with Hybrid-Pro Algorithm + + ti,tas5830: 65-W Stereo, Digital Input, High Efficiency Closed-Loop + Class-D Amplifier with Class-H Algorithm oneOf: - items: - enum: @@ -90,13 +115,19 @@ properties: - ti,tas2120 - ti,tas2320 - ti,tas2563 + - ti,tas2568 - ti,tas2570 - ti,tas2572 + - ti,tas2574 - ti,tas5802 + - ti,tas5806m + - ti,tas5806md - ti,tas5815 + - ti,tas5822 - ti,tas5825 - ti,tas5827 - ti,tas5828 + - ti,tas5830 - const: ti,tas2781 - enum: - ti,tas2781 @@ -132,6 +163,8 @@ allOf: - ti,tas2118 - ti,tas2120 - ti,tas2320 + - ti,tas2568 + - ti,tas2574 then: properties: reg: @@ -207,6 +240,22 @@ allOf: minimum: 0x54 maximum: 0x57 + - if: + properties: + compatible: + contains: + enum: + - ti,tas5806m + - ti,tas5806md + - ti,tas5822 + then: + properties: + reg: + maxItems: 4 + items: + minimum: 0x2c + maximum: 0x2f + - if: properties: compatible: @@ -214,6 +263,7 @@ allOf: enum: - ti,tas5827 - ti,tas5828 + - ti,tas5830 then: properties: reg: diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320dac3100.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320dac3100.yaml index 85e937e34962da..10299064cbc690 100644 --- a/Documentation/devicetree/bindings/sound/ti,tlv320dac3100.yaml +++ b/Documentation/devicetree/bindings/sound/ti,tlv320dac3100.yaml @@ -84,7 +84,6 @@ properties: description: gpio pin number used for codec reset deprecated: true - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/sound/trivial-codec.yaml b/Documentation/devicetree/bindings/sound/trivial-codec.yaml new file mode 100644 index 00000000000000..9a35dfb17349ac --- /dev/null +++ b/Documentation/devicetree/bindings/sound/trivial-codec.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/trivial-codec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Trivial Audio Codec + +maintainers: + - Rob Herring + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + # Analog Devices SSM2602 I2S audio CODEC devices + - adi,ssm2602 + - adi,ssm2603 + - adi,ssm2604 + - adi,ssm3515 + # Cirrus Logic CS4265 audio DAC + - cirrus,cs4265 + - cirrus,cs4341a + - cirrus,cs4349 + - dlg,da9055-codec + # Nuvoton Technology Corporation NAU85L40 Audio CODEC + - nuvoton,nau8540 + - nuvoton,nau8810 + - nuvoton,nau8812 + - nuvoton,nau8814 + # NXP TFA9879 class-D audio amplifier + - nxp,tfa9879 + - nxp,uda1342 + - sdw3019f836300 + - ti,pcm1789 + - ti,pcm1792a + - ti,pcm5102a + - wlf,wm8510 + - wlf,wm8523 + - wlf,wm8580 + - wlf,wm8581 + - wlf,wm8711 + - wlf,wm8728 + - wlf,wm8737 + - wlf,wm8750 + - wlf,wm8753 + - wlf,wm8770 + - wlf,wm8776 + - wlf,wm8961 + - wlf,wm8974 + - wlf,wm8987 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + reset-gpios: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@1a { + compatible = "wlf,wm8523"; + reg = <0x1a>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8510.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8510.yaml deleted file mode 100644 index 6d12b0ac37e286..00000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8510.yaml +++ /dev/null @@ -1,41 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8510.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8510 audio CODEC - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: wlf,wm8510 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - codec@1a { - compatible = "wlf,wm8510"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8523.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8523.yaml deleted file mode 100644 index decc395bb87395..00000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8523.yaml +++ /dev/null @@ -1,40 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8523.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8523 audio CODEC - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: wlf,wm8523 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec@1a { - compatible = "wlf,wm8523"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8580.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8580.yaml deleted file mode 100644 index 2f27852cdc200c..00000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8580.yaml +++ /dev/null @@ -1,42 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8580.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8580 and WM8581 audio CODEC - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - enum: - - wlf,wm8580 - - wlf,wm8581 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec@1a { - compatible = "wlf,wm8580"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8711.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8711.yaml deleted file mode 100644 index ecaac2818b4468..00000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8711.yaml +++ /dev/null @@ -1,40 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8711.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8711 audio CODEC - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: wlf,wm8711 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec@1a { - compatible = "wlf,wm8711"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8728.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8728.yaml deleted file mode 100644 index fc89475a051e86..00000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8728.yaml +++ /dev/null @@ -1,40 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8728.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8728 audio CODEC - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: wlf,wm8728 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec@1a { - compatible = "wlf,wm8728"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8737.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8737.yaml deleted file mode 100644 index 12d8765726d8f1..00000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8737.yaml +++ /dev/null @@ -1,40 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8737.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8737 audio CODEC - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: wlf,wm8737 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec@1a { - compatible = "wlf,wm8737"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8750.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8750.yaml deleted file mode 100644 index 96859e38315b1a..00000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8750.yaml +++ /dev/null @@ -1,42 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8750.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8750 and WM8987 audio CODECs - -description: | - These devices support both I2C and SPI (configured with pin strapping - on the board). - -maintainers: - - Mark Brown - -properties: - compatible: - enum: - - wlf,wm8750 - - wlf,wm8987 - - reg: - description: - The I2C address of the device for I2C, the chip select number for SPI - maxItems: 1 - -additionalProperties: false - -required: - - reg - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - codec@1a { - compatible = "wlf,wm8750"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8753.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8753.yaml deleted file mode 100644 index 9eebe7d7f0b7d6..00000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8753.yaml +++ /dev/null @@ -1,62 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8753.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8753 audio CODEC - -description: | - Pins on the device (for linking into audio routes): - * LOUT1 - * LOUT2 - * ROUT1 - * ROUT2 - * MONO1 - * MONO2 - * OUT3 - * OUT4 - * LINE1 - * LINE2 - * RXP - * RXN - * ACIN - * ACOP - * MIC1N - * MIC1 - * MIC2N - * MIC2 - * Mic Bias - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: wlf,wm8753 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - codec@1a { - compatible = "wlf,wm8753"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8776.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8776.yaml deleted file mode 100644 index 7bbc96ee81be34..00000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8776.yaml +++ /dev/null @@ -1,41 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8776.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8776 audio CODEC - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: wlf,wm8776 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - codec@1a { - compatible = "wlf,wm8776"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml index 4cfa66f6268178..089b6738479755 100644 --- a/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml +++ b/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml @@ -75,7 +75,6 @@ properties: DCVDD-supply: description: Digital core supply regulator for the DCVDD pin. - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8961.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8961.yaml deleted file mode 100644 index f580785455693c..00000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8961.yaml +++ /dev/null @@ -1,43 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8961.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Wolfson WM8961 Ultra-Low Power Stereo CODEC - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: wlf,wm8961 - - reg: - maxItems: 1 - - '#sound-dai-cells': - const: 0 - -required: - - compatible - - reg - - '#sound-dai-cells' - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - wm8961: codec@4a { - compatible = "wlf,wm8961"; - reg = <0x4a>; - #sound-dai-cells = <0>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8974.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8974.yaml deleted file mode 100644 index d27300207c67ea..00000000000000 --- a/Documentation/devicetree/bindings/sound/wlf,wm8974.yaml +++ /dev/null @@ -1,41 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/sound/wlf,wm8974.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: WM8974 audio CODEC - -maintainers: - - patches@opensource.cirrus.com - -allOf: - - $ref: dai-common.yaml# - -properties: - compatible: - const: wlf,wm8974 - - reg: - maxItems: 1 - - "#sound-dai-cells": - const: 0 - -required: - - compatible - - reg - -unevaluatedProperties: false - -examples: - - | - i2c { - #address-cells = <1>; - #size-cells = <0>; - - codec@1a { - compatible = "wlf,wm8974"; - reg = <0x1a>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8994.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8994.yaml index 8f045de028509e..0db04a90ac6b3b 100644 --- a/Documentation/devicetree/bindings/sound/wlf,wm8994.yaml +++ b/Documentation/devicetree/bindings/sound/wlf,wm8994.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Wolfson WM1811/WM8994/WM8958 audio codecs maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski - patches@opensource.cirrus.com description: | diff --git a/Documentation/devicetree/bindings/sound/wm8770.txt b/Documentation/devicetree/bindings/sound/wm8770.txt deleted file mode 100644 index cac762a1105ded..00000000000000 --- a/Documentation/devicetree/bindings/sound/wm8770.txt +++ /dev/null @@ -1,16 +0,0 @@ -WM8770 audio CODEC - -This device supports SPI. - -Required properties: - - - compatible : "wlf,wm8770" - - - reg : the chip select number. - -Example: - -wm8770: codec@1 { - compatible = "wlf,wm8770"; - reg = <1>; -}; diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml index 95d947fda6a705..003023729fb8ca 100644 --- a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml +++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml @@ -23,6 +23,7 @@ properties: - qcom,soundwire-v1.6.0 - qcom,soundwire-v1.7.0 - qcom,soundwire-v2.0.0 + - qcom,soundwire-v3.1.0 - items: - enum: - qcom,soundwire-v2.1.0 @@ -73,10 +74,12 @@ properties: qcom,din-ports: $ref: /schemas/types.yaml#/definitions/uint32 description: count of data in ports + deprecated: true qcom,dout-ports: $ref: /schemas/types.yaml#/definitions/uint32 description: count of data out ports + deprecated: true qcom,ports-word-length: $ref: /schemas/types.yaml#/definitions/uint8-array @@ -223,8 +226,6 @@ required: - '#sound-dai-cells' - '#address-cells' - '#size-cells' - - qcom,dout-ports - - qcom,din-ports - qcom,ports-offset1 - qcom,ports-offset2 @@ -257,9 +258,6 @@ examples: clocks = <&lpass_rx_macro>; clock-names = "iface"; - qcom,din-ports = <0>; - qcom,dout-ports = <5>; - resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>; reset-names = "swr_audio_cgcr"; diff --git a/Documentation/devicetree/bindings/spi/airoha,en7581-snand.yaml b/Documentation/devicetree/bindings/spi/airoha,en7581-snand.yaml index b820c5613dcc1a..855aa08995b96b 100644 --- a/Documentation/devicetree/bindings/spi/airoha,en7581-snand.yaml +++ b/Documentation/devicetree/bindings/spi/airoha,en7581-snand.yaml @@ -14,7 +14,12 @@ allOf: properties: compatible: - const: airoha,en7581-snand + oneOf: + - const: airoha,en7581-snand + - items: + - enum: + - airoha,en7523-snand + - const: airoha,en7581-snand reg: items: diff --git a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml index 3b47b68b92cb8a..1b91d1566c9530 100644 --- a/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml +++ b/Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml @@ -17,6 +17,7 @@ properties: compatible: oneOf: - const: allwinner,sun50i-r329-spi + - const: allwinner,sun55i-a523-spi - const: allwinner,sun6i-a31-spi - const: allwinner,sun8i-h3-spi - items: @@ -35,6 +36,9 @@ properties: - const: allwinner,sun20i-d1-spi-dbi - const: allwinner,sun50i-r329-spi-dbi - const: allwinner,sun50i-r329-spi + - items: + - const: allwinner,sun55i-a523-spi-dbi + - const: allwinner,sun55i-a523-spi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/spi/arm,pl022-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/arm,pl022-peripheral-props.yaml index bb8b6863b10909..f976e416395b7d 100644 --- a/Documentation/devicetree/bindings/spi/arm,pl022-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/spi/arm,pl022-peripheral-props.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Peripheral-specific properties for Arm PL022 SPI controller maintainers: - - Linus Walleij + - Linus Walleij select: false diff --git a/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml index 57d932af4506f7..80e542624cc62e 100644 --- a/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml +++ b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml @@ -12,7 +12,7 @@ maintainers: description: | This binding describes the Aspeed Static Memory Controllers (FMC and - SPI) of the AST2400, AST2500 and AST2600 SOCs. + SPI) of the AST2400, AST2500, AST2600 and AST2700 SOCs. allOf: - $ref: spi-controller.yaml# @@ -20,6 +20,8 @@ allOf: properties: compatible: enum: + - aspeed,ast2700-fmc + - aspeed,ast2700-spi - aspeed,ast2600-fmc - aspeed,ast2600-spi - aspeed,ast2500-fmc diff --git a/Documentation/devicetree/bindings/spi/fsl,spi-fsl-qspi.yaml b/Documentation/devicetree/bindings/spi/fsl,spi-fsl-qspi.yaml index f2dd20370dbb3b..1d10cfbad86c74 100644 --- a/Documentation/devicetree/bindings/spi/fsl,spi-fsl-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/fsl,spi-fsl-qspi.yaml @@ -9,9 +9,6 @@ title: Freescale Quad Serial Peripheral Interface (QuadSPI) maintainers: - Han Xu -allOf: - - $ref: spi-controller.yaml# - properties: compatible: oneOf: @@ -22,6 +19,7 @@ properties: - fsl,imx6ul-qspi - fsl,ls1021a-qspi - fsl,ls2080a-qspi + - spacemit,k1-qspi - items: - enum: - fsl,ls1043a-qspi @@ -54,6 +52,11 @@ properties: - const: qspi_en - const: qspi + resets: + items: + - description: SoC QSPI reset + - description: SoC QSPI bus reset + required: - compatible - reg @@ -62,6 +65,18 @@ required: - clocks - clock-names +allOf: + - $ref: spi-controller.yaml# + - if: + properties: + compatible: + not: + contains: + const: spacemit,k1-qspi + then: + properties: + resets: false + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml b/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml index 62a568bdbfa05f..636338d24bdfb5 100644 --- a/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml +++ b/Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml @@ -21,11 +21,13 @@ properties: - microchip,mpfs-qspi - microchip,pic64gx-qspi - const: microchip,coreqspi-rtl-v2 - - const: microchip,coreqspi-rtl-v2 # FPGA QSPI + - enum: + - microchip,coreqspi-rtl-v2 # FPGA QSPI + - microchip,corespi-rtl-v5 # FPGA CoreSPI + - microchip,mpfs-spi - items: - const: microchip,pic64gx-spi - const: microchip,mpfs-spi - - const: microchip,mpfs-spi reg: maxItems: 1 @@ -39,6 +41,45 @@ properties: clocks: maxItems: 1 + microchip,apb-datawidth: + description: APB bus data width in bits. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [8, 16, 32] + default: 8 + + microchip,frame-size: + description: | + Number of bits per SPI frame, as configured in Libero. + In Motorola and TI modes, this corresponds directly + to the requested frame size. For NSC mode this is set + to 9 + the required data frame size. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 4 + maximum: 32 + default: 8 + + microchip,protocol-configuration: + description: CoreSPI protocol selection. Determines operating mode + $ref: /schemas/types.yaml#/definitions/string + enum: + - motorola + - ti + - nsc + default: motorola + + microchip,motorola-mode: + description: Motorola SPI mode selection + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 3 + + microchip,ssel-active: + description: | + Keep SSEL asserted between frames when using the Motorola protocol. + When present, the controller keeps SSEL active across contiguous + transfers and deasserts only when the overall transfer completes. + type: boolean + required: - compatible - reg @@ -71,6 +112,31 @@ allOf: num-cs: maximum: 1 + - if: + properties: + compatible: + contains: + const: microchip,corespi-rtl-v5 + then: + properties: + num-cs: + minimum: 1 + maximum: 8 + default: 8 + + fifo-depth: + minimum: 1 + maximum: 32 + default: 4 + + else: + properties: + microchip,apb-datawidth: false + microchip,frame-size: false + microchip,protocol-configuration: false + microchip,motorola-mode: false + microchip,ssel-active: false + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt b/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt deleted file mode 100644 index a4e72e52af592c..00000000000000 --- a/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.txt +++ /dev/null @@ -1,36 +0,0 @@ -Nuvoton NPCM Peripheral Serial Peripheral Interface(PSPI) controller driver - -Nuvoton NPCM7xx SOC support two PSPI channels. - -Required properties: - - compatible : "nuvoton,npcm750-pspi" for Poleg NPCM7XX. - "nuvoton,npcm845-pspi" for Arbel NPCM8XX. - - #address-cells : should be 1. see spi-bus.txt - - #size-cells : should be 0. see spi-bus.txt - - specifies physical base address and size of the register. - - interrupts : contain PSPI interrupt. - - clocks : phandle of PSPI reference clock. - - clock-names: Should be "clk_apb5". - - pinctrl-names : a pinctrl state named "default" must be defined. - - pinctrl-0 : phandle referencing pin configuration of the device. - - resets : phandle to the reset control for this device. - - cs-gpios: Specifies the gpio pins to be used for chipselects. - See: Documentation/devicetree/bindings/spi/spi-bus.txt - -Optional properties: -- clock-frequency : Input clock frequency to the PSPI block in Hz. - Default is 25000000 Hz. - -spi0: spi@f0200000 { - compatible = "nuvoton,npcm750-pspi"; - reg = <0xf0200000 0x1000>; - pinctrl-names = "default"; - pinctrl-0 = <&pspi1_pins>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = ; - clocks = <&clk NPCM7XX_CLK_APB5>; - clock-names = "clk_apb5"; - resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1> - cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; -}; diff --git a/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.yaml b/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.yaml new file mode 100644 index 00000000000000..db0fb872020a93 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/nuvoton,npcm-pspi.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/nuvoton,npcm-pspi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NPCM Peripheral SPI (PSPI) Controller + +maintainers: + - Tomer Maimon + +allOf: + - $ref: spi-controller.yaml# + +description: + Nuvoton NPCM Peripheral Serial Peripheral Interface (PSPI) controller. + Nuvoton NPCM7xx SOC supports two PSPI channels. + Nuvoton NPCM8xx SOC support one PSPI channel. + +properties: + compatible: + enum: + - nuvoton,npcm750-pspi # Poleg NPCM7XX + - nuvoton,npcm845-pspi # Arbel NPCM8XX + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + description: PSPI reference clock. + + clock-names: + items: + - const: clk_apb5 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + #include "dt-bindings/gpio/gpio.h" + spi0: spi@f0200000 { + compatible = "nuvoton,npcm750-pspi"; + reg = <0xf0200000 0x1000>; + pinctrl-names = "default"; + pinctrl-0 = <&pspi1_pins>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clocks = <&clk NPCM7XX_CLK_APB5>; + clock-names = "clk_apb5"; + resets = <&rstc NPCM7XX_RESET_IPSRST2 NPCM7XX_RESET_PSPI1>; + cs-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + }; + diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml index d12c5a060ed00f..edf399681d7a99 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml +++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml @@ -9,7 +9,7 @@ title: GENI based Qualcomm Universal Peripheral (QUP) Serial Peripheral Interfac maintainers: - Andy Gross - Bjorn Andersson - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: The QUP v3 core is a GENI based AHB slave that provides a common data path diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml index cb1f15224b4557..7d0571feb46d60 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qpic-snand.yaml @@ -25,6 +25,8 @@ properties: - items: - enum: - qcom,ipq5018-snand + - qcom,ipq5332-snand + - qcom,ipq5424-snand - const: qcom,ipq9574-snand - const: qcom,ipq9574-snand diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml index 88be1326896217..7df21b15a0d47d 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.yaml @@ -9,7 +9,7 @@ title: Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI) maintainers: - Andy Gross - Bjorn Andersson - - Krzysztof Kozlowski + - Krzysztof Kozlowski description: The QUP core is an AHB slave that provides a common data path (an output FIFO diff --git a/Documentation/devicetree/bindings/spi/renesas,rzv2h-rspi.yaml b/Documentation/devicetree/bindings/spi/renesas,rzv2h-rspi.yaml index ab27fefc3c3a3d..069557a587b57e 100644 --- a/Documentation/devicetree/bindings/spi/renesas,rzv2h-rspi.yaml +++ b/Documentation/devicetree/bindings/spi/renesas,rzv2h-rspi.yaml @@ -9,12 +9,18 @@ title: Renesas RZ/V2H(P) Renesas Serial Peripheral Interface (RSPI) maintainers: - Fabrizio Castro -allOf: - - $ref: spi-controller.yaml# - properties: compatible: - const: renesas,r9a09g057-rspi # RZ/V2H(P) + oneOf: + - enum: + - renesas,r9a09g057-rspi # RZ/V2H(P) + - renesas,r9a09g077-rspi # RZ/T2H + - items: + - const: renesas,r9a09g056-rspi # RZ/V2N + - const: renesas,r9a09g057-rspi + - items: + - const: renesas,r9a09g087-rspi # RZ/N2H + - const: renesas,r9a09g077-rspi # RZ/T2H reg: maxItems: 1 @@ -36,13 +42,12 @@ properties: - const: tx clocks: + minItems: 2 maxItems: 3 clock-names: - items: - - const: pclk - - const: pclk_sfr - - const: tclk + minItems: 2 + maxItems: 3 resets: maxItems: 2 @@ -62,12 +67,52 @@ required: - interrupt-names - clocks - clock-names - - resets - - reset-names - power-domains - '#address-cells' - '#size-cells' +allOf: + - $ref: spi-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - renesas,r9a09g057-rspi + then: + properties: + clocks: + minItems: 3 + + clock-names: + items: + - const: pclk + - const: pclk_sfr + - const: tclk + + required: + - resets + - reset-names + + - if: + properties: + compatible: + contains: + enum: + - renesas,r9a09g077-rspi + then: + properties: + clocks: + maxItems: 2 + + clock-names: + items: + - const: pclk + - const: pclkspi + + resets: false + reset-names: false + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml index 0543c526b783af..81838577cf9cdb 100644 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml @@ -121,7 +121,7 @@ properties: num-cs: default: 4 minimum: 1 - maximum: 4 + maximum: 16 dmas: items: @@ -153,14 +153,14 @@ properties: provides an interface to override the native DWC SSI CS control. patternProperties: - "^.*@[0-9a-f]+$": + "@[0-9a-f]$": type: object additionalProperties: true properties: reg: minimum: 0 - maximum: 3 + maximum: 0xf unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/spi/spi-cadence.yaml b/Documentation/devicetree/bindings/spi/spi-cadence.yaml index 27414b78d61d80..347bed0c495606 100644 --- a/Documentation/devicetree/bindings/spi/spi-cadence.yaml +++ b/Documentation/devicetree/bindings/spi/spi-cadence.yaml @@ -21,6 +21,7 @@ properties: - enum: - xlnx,zynqmp-spi-r1p6 - xlnx,versal-net-spi-r1p6 + - cix,sky1-spi-r1p6 - const: cdns,spi-r1p6 reg: diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index 82d051f7bd6e09..3b8e990e30c478 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -111,7 +111,7 @@ properties: - compatible patternProperties: - "^.*@[0-9a-f]+$": + "@[0-9a-f]+$": type: object $ref: spi-peripheral-props.yaml additionalProperties: true diff --git a/Documentation/devicetree/bindings/spi/spi-pl022.yaml b/Documentation/devicetree/bindings/spi/spi-pl022.yaml index 7f174b7d0a26f6..680fdfa184d0c8 100644 --- a/Documentation/devicetree/bindings/spi/spi-pl022.yaml +++ b/Documentation/devicetree/bindings/spi/spi-pl022.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: ARM PL022 SPI controller maintainers: - - Linus Walleij + - Linus Walleij allOf: - $ref: spi-controller.yaml# diff --git a/Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt b/Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt deleted file mode 100644 index 12fc4ef04837f7..00000000000000 --- a/Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt +++ /dev/null @@ -1,33 +0,0 @@ -Amazon's Annapurna Labs Thermal Sensor - -Simple thermal device that allows temperature reading by a single MMIO -transaction. - -Required properties: -- compatible: "amazon,al-thermal". -- reg: The physical base address and length of the sensor's registers. -- #thermal-sensor-cells: Must be 1. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description. - -Example: - thermal: thermal { - compatible = "amazon,al-thermal"; - reg = <0x0 0x05002860 0x0 0x1>; - #thermal-sensor-cells = <0x1>; - }; - - thermal-zones { - thermal-z0 { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&thermal 0>; - trips { - critical { - temperature = <105000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - }; - }; - diff --git a/Documentation/devicetree/bindings/thermal/amazon,al-thermal.yaml b/Documentation/devicetree/bindings/thermal/amazon,al-thermal.yaml new file mode 100644 index 00000000000000..6b5884d74dd6f1 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/amazon,al-thermal.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/amazon,al-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amazon Annapurna Labs Thermal Sensor + +maintainers: + - Talel Shenhar + +description: + Simple thermal device that allows temperature reading by a single MMIO + transaction. + +properties: + compatible: + items: + - const: amazon,al-thermal + + reg: + maxItems: 1 + + '#thermal-sensor-cells': + const: 1 + +additionalProperties: false + +examples: + - | + thermal: thermal@5002860 { + compatible = "amazon,al-thermal"; + reg = <0x05002860 0x1>; + #thermal-sensor-cells = <0x1>; + }; + + thermal-zones { + z0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&thermal 0>; + trips { + critical { + temperature = <105000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt deleted file mode 100644 index 3ab330219d45e1..00000000000000 --- a/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt +++ /dev/null @@ -1,105 +0,0 @@ -* Broadcom Stingray Thermal - -This binding describes thermal sensors that is part of Stingray SoCs. - -Required properties: -- compatible : Must be "brcm,sr-thermal" -- reg : Memory where tmon data will be available. -- brcm,tmon-mask: A one cell bit mask of valid TMON sources. - Each bit represents single TMON source. -- #thermal-sensor-cells : Thermal sensor phandler -- polling-delay: Max number of milliseconds to wait between polls. -- thermal-sensors: A list of thermal sensor phandles and specifier. - specifier value is tmon ID and it should be - in correspond with brcm,tmon-mask. -- temperature: trip temperature threshold in millicelsius. - -Example: - tmons { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x8f100000 0x100>; - - tmon: tmon@0 { - compatible = "brcm,sr-thermal"; - reg = <0x0 0x40>; - brcm,tmon-mask = <0x3f>; - #thermal-sensor-cells = <1>; - }; - }; - - thermal-zones { - ihost0_thermal: ihost0-thermal { - polling-delay-passive = <0>; - polling-delay = <1000>; - thermal-sensors = <&tmon 0>; - trips { - cpu-crit { - temperature = <105000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - ihost1_thermal: ihost1-thermal { - polling-delay-passive = <0>; - polling-delay = <1000>; - thermal-sensors = <&tmon 1>; - trips { - cpu-crit { - temperature = <105000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - ihost2_thermal: ihost2-thermal { - polling-delay-passive = <0>; - polling-delay = <1000>; - thermal-sensors = <&tmon 2>; - trips { - cpu-crit { - temperature = <105000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - ihost3_thermal: ihost3-thermal { - polling-delay-passive = <0>; - polling-delay = <1000>; - thermal-sensors = <&tmon 3>; - trips { - cpu-crit { - temperature = <105000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - crmu_thermal: crmu-thermal { - polling-delay-passive = <0>; - polling-delay = <1000>; - thermal-sensors = <&tmon 4>; - trips { - cpu-crit { - temperature = <105000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - nitro_thermal: nitro-thermal { - polling-delay-passive = <0>; - polling-delay = <1000>; - thermal-sensors = <&tmon 5>; - trips { - cpu-crit { - temperature = <105000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.yaml new file mode 100644 index 00000000000000..576a627cd59901 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/brcm,sr-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Stingray Thermal Sensors + +maintainers: + - Ray Jui + - Scott Branden + +allOf: + - $ref: thermal-sensor.yaml# + +properties: + compatible: + const: brcm,sr-thermal + + reg: + maxItems: 1 + + brcm,tmon-mask: + description: + A one-cell bit mask of valid TMON sources. Each bit represents a single + TMON source. + $ref: /schemas/types.yaml#/definitions/uint32 + + '#thermal-sensor-cells': + const: 1 + +required: + - compatible + - reg + - brcm,tmon-mask + +additionalProperties: false + +examples: + - | + tmon: thermal-sensor@0 { + compatible = "brcm,sr-thermal"; + reg = <0x0 0x40>; + brcm,tmon-mask = <0x3f>; + #thermal-sensor-cells = <1>; + }; + + thermal-zones { + ihost0_thermal: ihost0-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 0>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + ihost1_thermal: ihost1-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 1>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + ihost2_thermal: ihost2-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 2>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + ihost3_thermal: ihost3-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 3>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + crmu_thermal: crmu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 4>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + nitro_thermal: nitro-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 5>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/thermal/db8500-thermal.txt b/Documentation/devicetree/bindings/thermal/db8500-thermal.txt deleted file mode 100644 index 2e1c06fad81fe2..00000000000000 --- a/Documentation/devicetree/bindings/thermal/db8500-thermal.txt +++ /dev/null @@ -1,44 +0,0 @@ -* ST-Ericsson DB8500 Thermal - -** Thermal node properties: - -- compatible : "stericsson,db8500-thermal"; -- reg : address range of the thermal sensor registers; -- interrupts : interrupts generated from PRCMU; -- interrupt-names : "IRQ_HOTMON_LOW" and "IRQ_HOTMON_HIGH"; -- num-trips : number of total trip points, this is required, set it 0 if none, - if greater than 0, the following properties must be defined; -- tripN-temp : temperature of trip point N, should be in ascending order; -- tripN-type : type of trip point N, should be one of "active" "passive" "hot" - "critical"; -- tripN-cdev-num : number of the cooling devices which can be bound to trip - point N, this is required if trip point N is defined, set it 0 if none, - otherwise the following cooling device names must be defined; -- tripN-cdev-nameM : name of the No. M cooling device of trip point N; - -Usually the num-trips and tripN-*** are separated in board related dts files. - -Example: -thermal@801573c0 { - compatible = "stericsson,db8500-thermal"; - reg = <0x801573c0 0x40>; - interrupts = <21 0x4>, <22 0x4>; - interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH"; - - num-trips = <3>; - - trip0-temp = <75000>; - trip0-type = "active"; - trip0-cdev-num = <1>; - trip0-cdev-name0 = "thermal-cpufreq-0"; - - trip1-temp = <80000>; - trip1-type = "active"; - trip1-cdev-num = <2>; - trip1-cdev-name0 = "thermal-cpufreq-0"; - trip1-cdev-name1 = "thermal-fan"; - - trip2-temp = <85000>; - trip2-type = "critical"; - trip2-cdev-num = <0>; -} diff --git a/Documentation/devicetree/bindings/thermal/fsl,imx91-tmu.yaml b/Documentation/devicetree/bindings/thermal/fsl,imx91-tmu.yaml new file mode 100644 index 00000000000000..7fd1a86d728702 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/fsl,imx91-tmu.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/fsl,imx91-tmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX91 Thermal + +maintainers: + - Pengfei Li + +description: + i.MX91 features a new temperature sensor. It includes programmable + temperature threshold comparators for both normal and privileged + accesses and allows a programmable measurement frequency for the + Periodic One-Shot Measurement mode. Additionally, it provides + status registers for indicating the end of measurement and threshold + violation events. + +properties: + compatible: + items: + - const: fsl,imx91-tmu + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + items: + - description: Comparator 1 irq + - description: Comparator 2 irq + - description: Data ready irq + + interrupt-names: + items: + - const: thr1 + - const: thr2 + - const: ready + + nvmem-cells: + items: + - description: Phandle to the trim control 1 provided by ocotp + - description: Phandle to the trim control 2 provided by ocotp + + nvmem-cell-names: + items: + - const: trim1 + - const: trim2 + + "#thermal-sensor-cells": + const: 0 + +required: + - compatible + - reg + - clocks + - interrupts + - interrupt-names + +allOf: + - $ref: thermal-sensor.yaml + +unevaluatedProperties: false + +examples: + - | + #include + #include + + thermal-sensor@44482000 { + compatible = "fsl,imx91-tmu"; + reg = <0x44482000 0x1000>; + #thermal-sensor-cells = <0>; + clocks = <&clk IMX93_CLK_TMC_GATE>; + interrupt-parent = <&gic>; + interrupts = , + , + ; + interrupt-names = "thr1", "thr2", "ready"; + nvmem-cells = <&tmu_trim1>, <&tmu_trim2>; + nvmem-cell-names = "trim1", "trim2"; + }; + +... diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index 78e2f6573b96f2..3c5256b0cd9f21 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -36,10 +36,15 @@ properties: - qcom,msm8974-tsens - const: qcom,tsens-v0_1 + - description: + v1 of TSENS without RPM which requires to be explicitly reset + and enabled in the driver. + enum: + - qcom,ipq5018-tsens + - description: v1 of TSENS items: - enum: - - qcom,ipq5018-tsens - qcom,msm8937-tsens - qcom,msm8956-tsens - qcom,msm8976-tsens @@ -50,11 +55,13 @@ properties: items: - enum: - qcom,glymur-tsens + - qcom,kaanapali-tsens - qcom,milos-tsens - qcom,msm8953-tsens - qcom,msm8996-tsens - qcom,msm8998-tsens - qcom,qcm2290-tsens + - qcom,qcs8300-tsens - qcom,qcs615-tsens - qcom,sa8255p-tsens - qcom,sa8775p-tsens diff --git a/Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml b/Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml index 8d3f3c24f0f270..befdc8b7a08245 100644 --- a/Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml +++ b/Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml @@ -16,7 +16,11 @@ description: properties: compatible: - const: renesas,r9a09g047-tsu + oneOf: + - const: renesas,r9a09g047-tsu # RZ/G3E + - items: + - const: renesas,r9a09g057-tsu # RZ/V2H + - const: renesas,r9a09g047-tsu # RZ/G3E reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/timer/faraday,fttmr010.yaml b/Documentation/devicetree/bindings/timer/faraday,fttmr010.yaml index 39506323556c57..e93c20243dba14 100644 --- a/Documentation/devicetree/bindings/timer/faraday,fttmr010.yaml +++ b/Documentation/devicetree/bindings/timer/faraday,fttmr010.yaml @@ -8,7 +8,7 @@ title: Faraday FTTMR010 timer maintainers: - Joel Stanley - - Linus Walleij + - Linus Walleij description: This timer is a generic IP block from Faraday Technology, embedded in the diff --git a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml index 526b8db4d57590..c92e6b9cd5e2fb 100644 --- a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml +++ b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Intel IXP4xx XScale Networking Processors Timers maintainers: - - Linus Walleij + - Linus Walleij description: This timer is found in the Intel IXP4xx processors. diff --git a/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.yaml b/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.yaml index fe6bc4173789da..0643cfcc6bc736 100644 --- a/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.yaml +++ b/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.yaml @@ -8,7 +8,7 @@ title: Marvell MMP Timer maintainers: - Daniel Lezcano - - Thomas Gleixner + - Thomas Gleixner - Rob Herring properties: diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra-timer.yaml b/Documentation/devicetree/bindings/timer/nvidia,tegra-timer.yaml index 9ea2ea3a759900..adf208b7a5b95c 100644 --- a/Documentation/devicetree/bindings/timer/nvidia,tegra-timer.yaml +++ b/Documentation/devicetree/bindings/timer/nvidia,tegra-timer.yaml @@ -100,7 +100,6 @@ properties: items: - const: timer - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml index 76516e18e042cc..1d0bd36907ed14 100644 --- a/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml +++ b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml @@ -15,7 +15,6 @@ description: > reference generated by USEC, TSC or either clk_m or OSC. Each TMR can be programmed to generate one-shot, periodic, or watchdog interrupts. - properties: compatible: oneOf: diff --git a/Documentation/devicetree/bindings/timer/realtek,rtd1625-systimer.yaml b/Documentation/devicetree/bindings/timer/realtek,rtd1625-systimer.yaml new file mode 100644 index 00000000000000..e08d3d2d306ba8 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/realtek,rtd1625-systimer.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/timer/realtek,rtd1625-systimer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek System Timer + +maintainers: + - Hao-Wen Ting + +description: + The Realtek SYSTIMER (System Timer) is a 64-bit global hardware counter operating + at a fixed 1MHz frequency. Thanks to its compare match interrupt capability, + the timer natively supports oneshot mode for tick broadcast functionality. + +properties: + compatible: + oneOf: + - const: realtek,rtd1625-systimer + - items: + - const: realtek,rtd1635-systimer + - const: realtek,rtd1625-systimer + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include + + timer@89420 { + compatible = "realtek,rtd1635-systimer", + "realtek,rtd1625-systimer"; + reg = <0x89420 0x18>; + interrupts = ; + }; diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml index d85a1a088b35da..0d3b8dc362ba7e 100644 --- a/Documentation/devicetree/bindings/timer/sifive,clint.yaml +++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml @@ -36,6 +36,7 @@ properties: - starfive,jh7100-clint # StarFive JH7100 - starfive,jh7110-clint # StarFive JH7110 - starfive,jh8100-clint # StarFive JH8100 + - tenstorrent,blackhole-clint # Tenstorrent Blackhole - const: sifive,clint0 # SiFive CLINT v0 IP block - items: - {} diff --git a/Documentation/devicetree/bindings/timer/st,nomadik-mtu.yaml b/Documentation/devicetree/bindings/timer/st,nomadik-mtu.yaml index fa65878b357198..873a01c287f47b 100644 --- a/Documentation/devicetree/bindings/timer/st,nomadik-mtu.yaml +++ b/Documentation/devicetree/bindings/timer/st,nomadik-mtu.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: ST Microelectronics Nomadik Multi-Timer Unit MTU Timer maintainers: - - Linus Walleij + - Linus Walleij description: This timer is found in the ST Microelectronics Nomadik SoCs STn8800, STn8810 and STn8815 as well as in ST-Ericsson DB8500. diff --git a/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml b/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml index 4ed30efe40525f..cf7c82e980f674 100644 --- a/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml +++ b/Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml @@ -4,18 +4,23 @@ $id: http://devicetree.org/schemas/timer/thead,c900-aclint-mtimer.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Sophgo CLINT Timer +title: ACLINT Machine-level Timer Device maintainers: - Inochi Amaoto properties: compatible: - items: - - enum: - - sophgo,sg2042-aclint-mtimer - - sophgo,sg2044-aclint-mtimer - - const: thead,c900-aclint-mtimer + oneOf: + - items: + - enum: + - sophgo,sg2042-aclint-mtimer + - sophgo,sg2044-aclint-mtimer + - const: thead,c900-aclint-mtimer + - items: + - enum: + - anlogic,dr1v90-aclint-mtimer + - const: nuclei,ux900-aclint-mtimer reg: items: diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml index 58ff948d93c96a..d0f7dbf15d6f1d 100644 --- a/Documentation/devicetree/bindings/trivial-devices.yaml +++ b/Documentation/devicetree/bindings/trivial-devices.yaml @@ -43,8 +43,14 @@ properties: - adi,ad5110 # Temperature sensor with integrated fan control - adi,adm1027 + # Analog Devices ADT7410 High Accuracy Digital Temperature Sensor + - adi,adt7410 # Analog Devices ADT7411 Temperature Sensor and 8-channel ADC - adi,adt7411 + # Analog Devices ADT7420 High Accuracy Digital Temperature Sensor + - adi,adt7420 + # Analog Devices ADT7422 High Accuracy Digital Temperature Sensor + - adi,adt7422 # Temperature sensor with integrated fan control - adi,adt7463 # Temperature sensor with integrated fan control @@ -53,6 +59,8 @@ properties: - adi,lt7182s # AMS iAQ-Core VOC Sensor - ams,iaq-core + # Arduino microcontroller interface over SPI on UnoQ board + - arduino,unoq-mcu # Temperature monitoring of Astera Labs PT5161L PCIe retimer - asteralabs,pt5161l # i2c h/w elliptic curve crypto module @@ -113,8 +121,6 @@ properties: - fsl,mma7660 # MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer - fsl,mma8450 - # MPL3115: Absolute Digital Pressure Sensor - - fsl,mpl3115 # MPR121: Proximity Capacitive Touch Sensor Controller - fsl,mpr121 # Honeywell Humidicon HIH-6130 humidity/temperature sensor @@ -127,8 +133,6 @@ properties: - ibm,cffps2 # IBM On-Chip Controller hwmon device - ibm,p8-occ-hwmon - # Infineon barometric pressure and temperature sensor - - infineon,dps310 # Infineon IR36021 digital POL buck controller - infineon,ir36021 # Infineon IRPS5401 Voltage Regulator (PMIC) @@ -297,6 +301,10 @@ properties: - mps,mp2888 # Monolithic Power Systems Inc. multi-phase controller mp2891 - mps,mp2891 + # Monolithic Power Systems Inc. multi-phase controller mp2925 + - mps,mp2925 + # Monolithic Power Systems Inc. multi-phase controller mp2929 + - mps,mp2929 # Monolithic Power Systems Inc. multi-phase controller mp29502 - mps,mp29502 # Monolithic Power Systems Inc. multi-phase controller mp29608 @@ -317,6 +325,8 @@ properties: - mps,mp5998 # Monolithic Power Systems Inc. digital step-down converter mp9941 - mps,mp9941 + # Monolithic Power Systems Inc. digital step-down converter mp9945 + - mps,mp9945 # Temperature sensor with integrated fan control - national,lm63 # Temperature sensor with integrated fan control diff --git a/Documentation/devicetree/bindings/ufs/amd,versal2-ufs.yaml b/Documentation/devicetree/bindings/ufs/amd,versal2-ufs.yaml new file mode 100644 index 00000000000000..c00ec342d57433 --- /dev/null +++ b/Documentation/devicetree/bindings/ufs/amd,versal2-ufs.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/ufs/amd,versal2-ufs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AMD Versal Gen 2 UFS Host Controller + +maintainers: + - Sai Krishna Potthuri + +allOf: + - $ref: ufs-common.yaml + +properties: + compatible: + const: amd,versal2-ufs + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: core + + power-domains: + maxItems: 1 + + resets: + maxItems: 2 + + reset-names: + items: + - const: host + - const: phy + +required: + - reg + - clocks + - clock-names + - resets + - reset-names + +unevaluatedProperties: false + +examples: + - | + #include + ufs@f10b0000 { + compatible = "amd,versal2-ufs"; + reg = <0xf10b0000 0x1000>; + clocks = <&ufs_core_clk>; + clock-names = "core"; + resets = <&scmi_reset 4>, <&scmi_reset 35>; + reset-names = "host", "phy"; + interrupts = ; + freq-table-hz = <0 0>; + }; diff --git a/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml b/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml index 1dec54fb00f308..15c347f5e6604a 100644 --- a/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml +++ b/Documentation/devicetree/bindings/ufs/mediatek,ufs.yaml @@ -7,7 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Mediatek Universal Flash Storage (UFS) Controller maintainers: - - Stanley Chu + - Peter Wang + - Chaotian Jing properties: compatible: diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml index 1dd41f6d525801..516bb61a46241f 100644 --- a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml +++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml @@ -88,7 +88,6 @@ allOf: - const: ice_core_clk reg: minItems: 2 - maxItems: 2 reg-names: minItems: 2 required: @@ -117,7 +116,6 @@ allOf: - const: tx_lane0_sync_clk - const: rx_lane0_sync_clk reg: - minItems: 1 maxItems: 1 reg-names: maxItems: 1 @@ -147,7 +145,6 @@ allOf: - const: ice_core_clk reg: minItems: 2 - maxItems: 2 reg-names: minItems: 2 required: diff --git a/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml index b4e744ebffd10a..a7eb7ad85a94e5 100644 --- a/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml +++ b/Documentation/devicetree/bindings/ufs/samsung,exynos-ufs.yaml @@ -61,6 +61,9 @@ properties: phy-names: const: ufs-phy + power-domains: + maxItems: 1 + samsung,sysreg: $ref: /schemas/types.yaml#/definitions/phandle-array items: diff --git a/Documentation/devicetree/bindings/usb/apple,dwc3.yaml b/Documentation/devicetree/bindings/usb/apple,dwc3.yaml new file mode 100644 index 00000000000000..f70c33f32c5d61 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/apple,dwc3.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/apple,dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple Silicon DWC3 USB controller + +maintainers: + - Sven Peter + +description: + Apple Silicon SoCs use a Synopsys DesignWare DWC3 based controller for each of + their Type-C ports. + +allOf: + - $ref: snps,dwc3-common.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - apple,t6000-dwc3 + - apple,t6020-dwc3 + - apple,t8112-dwc3 + - const: apple,t8103-dwc3 + - const: apple,t8103-dwc3 + + reg: + items: + - description: Core DWC3 region + - description: Apple-specific DWC3 region + + reg-names: + items: + - const: dwc3-core + - const: dwc3-apple + + interrupts: + maxItems: 1 + + iommus: + maxItems: 2 + + resets: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - interrupts + - iommus + - resets + - power-domains + - usb-role-switch + +unevaluatedProperties: false + +examples: + - | + #include + #include + + usb@82280000 { + compatible = "apple,t8103-dwc3"; + reg = <0x82280000 0xcd00>, <0x8228cd00 0x3200>; + reg-names = "dwc3-core", "dwc3-apple"; + interrupts = ; + iommus = <&dwc3_0_dart_0 0>, <&dwc3_0_dart_1 1>; + + power-domains = <&ps_atc0_usb>; + resets = <&atcphy0>; + + usb-role-switch; + }; diff --git a/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml b/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml index 36f5c644d9590a..d6823ef5f9a78f 100644 --- a/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml +++ b/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml @@ -47,6 +47,7 @@ properties: - const: ref_clk resets: + minItems: 1 description: A list of phandles for resets listed in reset-names. @@ -56,6 +57,7 @@ properties: - description: USB APB reset reset-names: + minItems: 1 items: - const: usb_crst - const: usb_hibrst @@ -95,6 +97,26 @@ required: - resets - reset-names +allOf: + - if: + properties: + compatible: + contains: + enum: + - xlnx,versal-dwc3 + then: + properties: + resets: + maxItems: 1 + reset-names: + maxItems: 1 + else: + properties: + resets: + minItems: 3 + reset-names: + minItems: 3 + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/eswin,eic7700-usb.yaml b/Documentation/devicetree/bindings/usb/eswin,eic7700-usb.yaml new file mode 100644 index 00000000000000..41c3b1b9899115 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/eswin,eic7700-usb.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/eswin,eic7700-usb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ESWIN EIC7700 SoC Usb Controller + +maintainers: + - Wei Yang + - Senchuan Zhang + - Hang Cao + +description: + The Usb controller on EIC7700 SoC. + +allOf: + - $ref: snps,dwc3-common.yaml# + +properties: + compatible: + const: eswin,eic7700-dwc3 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: peripheral + + clocks: + maxItems: 3 + + clock-names: + items: + - const: aclk + - const: cfg + - const: usb_en + + resets: + maxItems: 2 + + reset-names: + items: + - const: vaux + - const: usb_rst + + eswin,hsp-sp-csr: + description: + HSP CSR is to control and get status of different high-speed peripherals + (such as Ethernet, USB, SATA, etc.) via register, which can tune + board-level's parameters of PHY, etc. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to HSP Register Controller hsp_sp_csr node. + - description: USB bus register offset. + - description: AXI low power register offset. + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - interrupt-names + - resets + - reset-names + - eswin,hsp-sp-csr + +unevaluatedProperties: false + +examples: + - | + usb@50480000 { + compatible = "eswin,eic7700-dwc3"; + reg = <0x50480000 0x10000>; + clocks = <&clock 135>, + <&clock 136>, + <&hspcrg 18>; + clock-names = "aclk", "cfg", "usb_en"; + interrupt-parent = <&plic>; + interrupts = <85>; + interrupt-names = "peripheral"; + resets = <&reset 84>, <&hspcrg 2>; + reset-names = "vaux", "usb_rst"; + dr_mode = "peripheral"; + maximum-speed = "high-speed"; + phy_type = "utmi"; + eswin,hsp-sp-csr = <&hsp_sp_csr 0x800 0x818>; + }; diff --git a/Documentation/devicetree/bindings/usb/faraday,fotg210.yaml b/Documentation/devicetree/bindings/usb/faraday,fotg210.yaml index 3fe4d1564dfed7..b97ba535087c9d 100644 --- a/Documentation/devicetree/bindings/usb/faraday,fotg210.yaml +++ b/Documentation/devicetree/bindings/usb/faraday,fotg210.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Faraday Technology FOTG200 series HS OTG USB 2.0 controller maintainers: - - Linus Walleij + - Linus Walleij allOf: - $ref: usb-drd.yaml# diff --git a/Documentation/devicetree/bindings/usb/fsl,ls1028a.yaml b/Documentation/devicetree/bindings/usb/fsl,ls1028a.yaml index a44bdf391887f9..4784f057264ac7 100644 --- a/Documentation/devicetree/bindings/usb/fsl,ls1028a.yaml +++ b/Documentation/devicetree/bindings/usb/fsl,ls1028a.yaml @@ -9,21 +9,19 @@ title: Freescale layerscape SuperSpeed DWC3 USB SoC controller maintainers: - Frank Li -select: - properties: - compatible: - contains: - enum: - - fsl,ls1028a-dwc3 - required: - - compatible - properties: compatible: - items: - - enum: - - fsl,ls1028a-dwc3 - - const: snps,dwc3 + oneOf: + - items: + - enum: + - fsl,ls1012a-dwc3 + - fsl,ls1043a-dwc3 + - fsl,ls1046a-dwc3 + - fsl,ls1088a-dwc3 + - fsl,ls208xa-dwc3 + - fsl,lx2160a-dwc3 + - const: fsl,ls1028a-dwc3 + - const: fsl,ls1028a-dwc3 reg: maxItems: 1 @@ -31,6 +29,11 @@ properties: interrupts: maxItems: 1 + iommus: + maxItems: 1 + + dma-coherent: true + unevaluatedProperties: false required: @@ -39,14 +42,14 @@ required: - interrupts allOf: - - $ref: snps,dwc3.yaml# + - $ref: snps,dwc3-common.yaml# examples: - | #include usb@fe800000 { - compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; + compatible = "fsl,ls1028a-dwc3"; reg = <0xfe800000 0x100000>; interrupts = ; }; diff --git a/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml b/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml index ca677d1a827492..d06efe4dbb3bea 100644 --- a/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml +++ b/Documentation/devicetree/bindings/usb/fsl,usbmisc.yaml @@ -36,6 +36,7 @@ properties: - fsl,imx8mm-usbmisc - fsl,imx8mn-usbmisc - fsl,imx8ulp-usbmisc + - fsl,imx94-usbmisc - fsl,imx95-usbmisc - const: fsl,imx7d-usbmisc - const: fsl,imx6q-usbmisc diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index 508d958e698c2e..4e84bead023258 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -46,6 +46,7 @@ properties: - aspeed,ast2400-ehci - aspeed,ast2500-ehci - aspeed,ast2600-ehci + - aspeed,ast2700-ehci - brcm,bcm3384-ehci - brcm,bcm63268-ehci - brcm,bcm6328-ehci diff --git a/Documentation/devicetree/bindings/usb/generic-xhci.yaml b/Documentation/devicetree/bindings/usb/generic-xhci.yaml index a2b94a13899904..62678abd74b578 100644 --- a/Documentation/devicetree/bindings/usb/generic-xhci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-xhci.yaml @@ -14,12 +14,15 @@ properties: oneOf: - description: Generic xHCI device const: generic-xhci - - description: Armada 37xx/375/38x/8k SoCs + - description: Armada 375/38x SoCs items: - enum: - - marvell,armada3700-xhci - marvell,armada-375-xhci - marvell,armada-380-xhci + - description: Armada 37xx/8k SoCs + items: + - enum: + - marvell,armada3700-xhci - marvell,armada-8k-xhci - const: generic-xhci - description: Broadcom SoCs with power domains @@ -53,6 +56,14 @@ properties: dma-coherent: true + dr_mode: + enum: + - host + - otg + + iommus: + maxItems: 1 + power-domains: maxItems: 1 diff --git a/Documentation/devicetree/bindings/usb/intel,ixp4xx-udc.yaml b/Documentation/devicetree/bindings/usb/intel,ixp4xx-udc.yaml index 4ed60274689725..91a149ad3ad6e7 100644 --- a/Documentation/devicetree/bindings/usb/intel,ixp4xx-udc.yaml +++ b/Documentation/devicetree/bindings/usb/intel,ixp4xx-udc.yaml @@ -10,7 +10,7 @@ description: The IXP4xx SoCs has a full-speed USB Device Controller with 16 endpoints and a built-in transceiver. maintainers: - - Linus Walleij + - Linus Walleij properties: compatible: diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml index 004d3ebec09190..231e6f35a986f8 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml @@ -34,6 +34,7 @@ properties: - mediatek,mt8183-xhci - mediatek,mt8186-xhci - mediatek,mt8188-xhci + - mediatek,mt8189-xhci - mediatek,mt8192-xhci - mediatek,mt8195-xhci - mediatek,mt8365-xhci @@ -168,7 +169,8 @@ properties: 104 - used by mt8195, IP1, specific 1.04; 105 - used by mt8195, IP2, specific 1.05; 106 - used by mt8195, IP3, specific 1.06; - enum: [1, 2, 101, 102, 103, 104, 105, 106] + 110 - used by mt8189, IP4, specific 1.10; + enum: [1, 2, 101, 102, 103, 104, 105, 106, 110] mediatek,u3p-dis-msk: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra234-xusb.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra234-xusb.yaml index db761dcbf72af2..ec0993497fbbde 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra234-xusb.yaml +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra234-xusb.yaml @@ -32,9 +32,35 @@ properties: - const: bar2 interrupts: + minItems: 2 items: - description: xHCI host interrupt - description: mailbox interrupt + - description: USB wake event 0 + - description: USB wake event 1 + - description: USB wake event 2 + - description: USB wake event 3 + - description: USB wake event 4 + - description: USB wake event 5 + - description: USB wake event 6 + description: | + The first two interrupts are required for the USB host controller. The + remaining USB wake event interrupts are optional. Each USB wake event is + independent; it is not necessary to use all of these events on a + platform. The USB host controller can function even if no wake-up events + are defined. The USB wake event interrupts are handled by the Tegra PMC; + hence, the interrupt controller for these is the PMC and the interrupt + IDs correspond to the PMC wake event IDs. A complete list of wake event + IDs is provided below, and this information is also present in the Tegra + TRM document. + + PMC wake-up 76 for USB3 port 0 wakeup + PMC wake-up 77 for USB3 port 1 wakeup + PMC wake-up 78 for USB3 port 2 and port 3 wakeup + PMC wake-up 79 for USB2 port 0 wakeup + PMC wake-up 80 for USB2 port 1 wakeup + PMC wake-up 81 for USB2 port 2 wakeup + PMC wake-up 82 for USB2 port 3 wakeup clocks: items: @@ -127,8 +153,9 @@ examples: <0x03650000 0x10000>; reg-names = "hcd", "fpci", "bar2"; - interrupts = , - ; + interrupts-extended = <&gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <&pmc 76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA234_CLK_XUSB_CORE_HOST>, <&bpmp TEGRA234_CLK_XUSB_FALCON>, diff --git a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml index 6d3ef364672e90..6d3fa2bc9ceec3 100644 --- a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml @@ -28,7 +28,6 @@ properties: - qcom,pm4125-typec - const: qcom,pmi632-typec - connector: type: object $ref: /schemas/connector/usb-connector.yaml# diff --git a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml index d49a58d5478ff3..8cee7c5582f2ae 100644 --- a/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,snps-dwc3.yaml @@ -24,6 +24,8 @@ properties: compatible: items: - enum: + - qcom,glymur-dwc3 + - qcom,glymur-dwc3-mp - qcom,ipq4019-dwc3 - qcom,ipq5018-dwc3 - qcom,ipq5332-dwc3 @@ -32,6 +34,7 @@ properties: - qcom,ipq8064-dwc3 - qcom,ipq8074-dwc3 - qcom,ipq9574-dwc3 + - qcom,kaanapali-dwc3 - qcom,milos-dwc3 - qcom,msm8953-dwc3 - qcom,msm8994-dwc3 @@ -67,6 +70,7 @@ properties: - qcom,sm8450-dwc3 - qcom,sm8550-dwc3 - qcom,sm8650-dwc3 + - qcom,sm8750-dwc3 - qcom,x1e80100-dwc3 - qcom,x1e80100-dwc3-mp - const: qcom,snps-dwc3 @@ -200,6 +204,7 @@ allOf: contains: enum: - qcom,ipq9574-dwc3 + - qcom,kaanapali-dwc3 - qcom,msm8953-dwc3 - qcom,msm8996-dwc3 - qcom,msm8998-dwc3 @@ -213,6 +218,7 @@ allOf: - qcom,sdx65-dwc3 - qcom,sdx75-dwc3 - qcom,sm6350-dwc3 + - qcom,sm8750-dwc3 then: properties: clocks: @@ -387,6 +393,28 @@ allOf: - const: mock_utmi - const: xo + - if: + properties: + compatible: + contains: + enum: + - qcom,glymur-dwc3 + - qcom,glymur-dwc3-mp + + then: + properties: + clocks: + maxItems: 7 + clock-names: + items: + - const: cfg_noc + - const: core + - const: iface + - const: sleep + - const: mock_utmi + - const: noc_aggr_north + - const: noc_aggr_south + - if: properties: compatible: @@ -456,6 +484,7 @@ allOf: compatible: contains: enum: + - qcom,glymur-dwc3 - qcom,milos-dwc3 - qcom,x1e80100-dwc3 then: @@ -479,6 +508,7 @@ allOf: enum: - qcom,ipq4019-dwc3 - qcom,ipq8064-dwc3 + - qcom,kaanapali-dwc3 - qcom,msm8994-dwc3 - qcom,qcs615-dwc3 - qcom,qcs8300-dwc3 @@ -501,6 +531,7 @@ allOf: - qcom,sm8450-dwc3 - qcom,sm8550-dwc3 - qcom,sm8650-dwc3 + - qcom,sm8750-dwc3 then: properties: interrupts: @@ -521,6 +552,7 @@ allOf: compatible: contains: enum: + - qcom,glymur-dwc3-mp - qcom,sc8180x-dwc3-mp - qcom,x1e80100-dwc3-mp then: diff --git a/Documentation/devicetree/bindings/usb/renesas,rzg3e-xhci.yaml b/Documentation/devicetree/bindings/usb/renesas,rzg3e-xhci.yaml index 98260f9fb44265..3f4b09e48ce09f 100644 --- a/Documentation/devicetree/bindings/usb/renesas,rzg3e-xhci.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,rzg3e-xhci.yaml @@ -4,14 +4,22 @@ $id: http://devicetree.org/schemas/usb/renesas,rzg3e-xhci.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Renesas RZ/G3E USB 3.2 Gen2 Host controller +title: Renesas USB 3.2 Gen2 Host controller maintainers: - Biju Das properties: compatible: - const: renesas,r9a09g047-xhci + oneOf: + - items: + - enum: + - renesas,r9a09g056-xhci # RZ/V2N + - renesas,r9a09g057-xhci # RZ/V2H(P) + - const: renesas,r9a09g047-xhci + + - items: + - const: renesas,r9a09g047-xhci # RZ/G3E reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml b/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml index 6d39e506694479..8af0143c3e4717 100644 --- a/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml @@ -21,6 +21,9 @@ properties: - samsung,exynos7870-dwusb3 - samsung,exynos850-dwusb3 - samsung,exynosautov920-dwusb3 + - items: + - const: samsung,exynos8890-dwusb3 + - const: samsung,exynos7-dwusb3 - items: - const: samsung,exynos990-dwusb3 - const: samsung,exynos850-dwusb3 @@ -36,6 +39,9 @@ properties: minItems: 1 maxItems: 4 + power-domains: + maxItems: 1 + ranges: true '#size-cells': diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml index bec1c8047bc055..06099e93c6c30d 100644 --- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml +++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml @@ -25,6 +25,14 @@ properties: interrupts: maxItems: 1 + id-gpios: + description: + An input gpio for USB ID pin. Upon detecting a UFP device, HD3SS3220 + will keep ID pin high if VBUS is not at VSafe0V. Once VBUS is at VSafe0V, + the HD3SS3220 will assert ID pin low. This is done to enforce Type-C + requirement that VBUS must be at VSafe0V before re-enabling VBUS. + maxItems: 1 + ports: $ref: /schemas/graph.yaml#/properties/ports description: OF graph bindings (specified in bindings/graph.txt) that model diff --git a/Documentation/devicetree/bindings/usb/usb-uhci.yaml b/Documentation/devicetree/bindings/usb/usb-uhci.yaml index d8336f72dc1fca..e050ca203945bc 100644 --- a/Documentation/devicetree/bindings/usb/usb-uhci.yaml +++ b/Documentation/devicetree/bindings/usb/usb-uhci.yaml @@ -20,6 +20,7 @@ properties: - aspeed,ast2400-uhci - aspeed,ast2500-uhci - aspeed,ast2600-uhci + - aspeed,ast2700-uhci - const: generic-uhci reg: @@ -28,6 +29,9 @@ properties: interrupts: maxItems: 1 + resets: + maxItems: 1 + '#ports': $ref: /schemas/types.yaml#/definitions/uint32 @@ -50,6 +54,15 @@ allOf: required: - clocks + - if: + properties: + compatible: + contains: + const: aspeed,ast2700-uhci + then: + required: + - resets + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index f1d1882009ba9e..c7591b2aec2a74 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -20,7 +20,7 @@ patternProperties: "^(keypad|m25p|max8952|max8997|max8998|mpmc),.*": true "^(pciclass|pinctrl-single|#pinctrl-single|PowerPC),.*": true "^(pl022|pxa-mmc|rcar_sound|rotary-encoder|s5m8767|sdhci),.*": true - "^(simple-audio-card|st-plgpio|st-spics|ts),.*": true + "^(simple-audio-card|st-plgpio|st-spics|ts|vsc8531),.*": true "^pool[0-3],.*": true # Keep list in alphabetical order. @@ -30,6 +30,8 @@ patternProperties: description: 70mai Co., Ltd. "^8dev,.*": description: 8devices, UAB + "^9tripod,.*": + description: Shenzhen 9Tripod Innovation and Development CO., LTD. "^abb,.*": description: ABB "^abilis,.*": @@ -132,6 +134,8 @@ patternProperties: description: Anbernic "^andestech,.*": description: Andes Technology Corporation + "^anlogic,.*": + description: Shanghai Anlogic Infotech Co., Ltd. "^anvo,.*": description: Anvo-Systems Dresden GmbH "^aoly,.*": @@ -176,6 +180,8 @@ patternProperties: description: All Sensors Corporation "^asix,.*": description: ASIX Electronics Corporation + "^asl-tek,.*": + description: ASL Xiamen Technology Co., Ltd. "^aspeed,.*": description: ASPEED Technology Inc. "^asrock,.*": @@ -251,6 +257,8 @@ patternProperties: description: Shanghai Broadmobi Communication Technology Co.,Ltd. "^bsh,.*": description: BSH Hausgeraete GmbH + "^bst,.*": + description: Black Sesame Technologies Co., Ltd. "^bticino,.*": description: Bticino International "^buffalo,.*": @@ -570,6 +578,8 @@ patternProperties: description: Foxconn Industrial Internet "^firefly,.*": description: Firefly + "^fitipower,.*": + description: Fitipower Integrated Technology Inc. "^flipkart,.*": description: Flipkart Inc. "^focaltech,.*": @@ -835,6 +845,8 @@ patternProperties: description: JOZ BV "^jty,.*": description: JTY + "^jutouch,.*": + description: JuTouch Technology Co., Ltd. "^kam,.*": description: Kamstrup A/S "^karo,.*": @@ -907,6 +919,8 @@ patternProperties: description: Lincoln Technology Solutions "^lineartechnology,.*": description: Linear Technology + "^linkease,.*": + description: Shenzhen LinkEase Network Technology Co., Ltd. "^linksprite,.*": description: LinkSprite Technologies, Inc. "^linksys,.*": @@ -1023,6 +1037,8 @@ patternProperties: description: MikroElektronika d.o.o. "^mikrotik,.*": description: MikroTik + "^milianke,.*": + description: Changzhou Milianke Electronic Technology Co., Ltd "^milkv,.*": description: MilkV Technology Co., Ltd "^miniand,.*": @@ -1140,6 +1156,8 @@ patternProperties: description: Novatek "^novtech,.*": description: NovTech, Inc. + "^nuclei,.*": + description: Nuclei System Technology "^numonyx,.*": description: Numonyx (deprecated, use micron) deprecated: true @@ -1323,6 +1341,8 @@ patternProperties: description: Raumfeld GmbH "^raydium,.*": description: Raydium Semiconductor Corp. + "^raystar,.*": + description: Raystar Optronics, Inc. "^rda,.*": description: Unisoc Communications, Inc. "^realtek,.*": @@ -1610,6 +1630,8 @@ patternProperties: description: Tempo Semiconductor "^tenda,.*": description: Shenzhen Tenda Technology Co., Ltd. + "^tenstorrent,.*": + description: Tenstorrent AI ULC "^terasic,.*": description: Terasic Inc. "^tesla,.*": @@ -1705,6 +1727,8 @@ patternProperties: description: Universal Scientific Industrial Co., Ltd. "^usr,.*": description: U.S. Robotics Corporation + "^ultrarisc,.*": + description: UltraRISC Technology Co., Ltd. "^ultratronik,.*": description: Ultratronik GmbH "^utoo,.*": diff --git a/Documentation/devicetree/bindings/watchdog/airoha,en7581-wdt.yaml b/Documentation/devicetree/bindings/watchdog/airoha,en7581-wdt.yaml index 6bbab3cb28e545..6259478bdae5ba 100644 --- a/Documentation/devicetree/bindings/watchdog/airoha,en7581-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/airoha,en7581-wdt.yaml @@ -14,7 +14,11 @@ allOf: properties: compatible: - const: airoha,en7581-wdt + oneOf: + - items: + - const: airoha,an7583-wdt + - const: airoha,en7581-wdt + - const: airoha,en7581-wdt reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml b/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml index be78a9865584d9..9322cb5b462a2c 100644 --- a/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml @@ -15,6 +15,7 @@ properties: - aspeed,ast2400-wdt - aspeed,ast2500-wdt - aspeed,ast2600-wdt + - aspeed,ast2700-wdt reg: maxItems: 1 @@ -87,13 +88,15 @@ properties: aspeed,reset-mask: $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 - maxItems: 2 + maxItems: 5 description: > A bitmask indicating which peripherals will be reset if the watchdog timer expires. On AST2500 SoCs this should be a single word defined using the AST2500_WDT_RESET_* macros; on AST2600 SoCs this should be a two-word array with the first word defined using the AST2600_WDT_RESET1_* macros, - and the second word defined using the AST2600_WDT_RESET2_* macros. + and the second word defined using the AST2600_WDT_RESET2_* macros; on + AST2700 SoCs, this should be five-word array from AST2700_WDT_RESET1_* + macros to AST2700_WDT_RESET5_* macros. required: - compatible @@ -114,6 +117,7 @@ allOf: enum: - aspeed,ast2500-wdt - aspeed,ast2600-wdt + - aspeed,ast2700-wdt - if: required: - aspeed,ext-active-high diff --git a/Documentation/devicetree/bindings/watchdog/faraday,ftwdt010.yaml b/Documentation/devicetree/bindings/watchdog/faraday,ftwdt010.yaml index 726dc872ad02dd..3eb35f325f4c5a 100644 --- a/Documentation/devicetree/bindings/watchdog/faraday,ftwdt010.yaml +++ b/Documentation/devicetree/bindings/watchdog/faraday,ftwdt010.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Faraday Technology FTWDT010 watchdog maintainers: - - Linus Walleij + - Linus Walleij - Corentin Labbe description: | diff --git a/Documentation/devicetree/bindings/watchdog/lantiq,wdt.yaml b/Documentation/devicetree/bindings/watchdog/lantiq,wdt.yaml new file mode 100644 index 00000000000000..a7edae9ca05a56 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/lantiq,wdt.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/lantiq,wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lantiq WTD watchdog + +maintainers: + - Hauke Mehrtens + +properties: + compatible: + oneOf: + - enum: + - lantiq,falcon-wdt + - lantiq,wdt + - lantiq,xrx100-wdt + - items: + - enum: + - lantiq,xrx200-wdt + - const: lantiq,xrx100-wdt + + reg: + maxItems: 1 + + lantiq,rcu: + $ref: /schemas/types.yaml#/definitions/phandle + description: Phandle to the RCU syscon node + +required: + - compatible + - reg + +allOf: + - $ref: watchdog.yaml# + - if: + properties: + compatible: + contains: + enum: + - lantiq,xrx100-wdt + - lantiq,falcon-wdt + then: + required: + - lantiq,rcu + +unevaluatedProperties: false + +examples: + - | + watchdog@803f0 { + compatible = "lantiq,xrx200-wdt", "lantiq,xrx100-wdt"; + reg = <0x803f0 0x10>; + + lantiq,rcu = <&rcu0>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/lantiq-wdt.txt b/Documentation/devicetree/bindings/watchdog/lantiq-wdt.txt deleted file mode 100644 index 18d4d83027026d..00000000000000 --- a/Documentation/devicetree/bindings/watchdog/lantiq-wdt.txt +++ /dev/null @@ -1,24 +0,0 @@ -Lantiq WTD watchdog binding -============================ - -This describes the binding of the Lantiq watchdog driver. - -------------------------------------------------------------------------------- -Required properties: -- compatible : Should be one of - "lantiq,wdt" - "lantiq,xrx100-wdt" - "lantiq,xrx200-wdt", "lantiq,xrx100-wdt" - "lantiq,falcon-wdt" -- reg : Address of the watchdog block -- lantiq,rcu : A phandle to the RCU syscon (required for - "lantiq,falcon-wdt" and "lantiq,xrx100-wdt") - -------------------------------------------------------------------------------- -Example for the watchdog on the xRX200 SoCs: - watchdog@803f0 { - compatible = "lantiq,xrx200-wdt", "lantiq,xrx100-wdt"; - reg = <0x803f0 0x10>; - - lantiq,rcu = <&rcu0>; - }; diff --git a/Documentation/devicetree/bindings/watchdog/loongson,ls1x-wdt.yaml b/Documentation/devicetree/bindings/watchdog/loongson,ls1x-wdt.yaml index 81690d4b62a643..50a9b468c4a3e5 100644 --- a/Documentation/devicetree/bindings/watchdog/loongson,ls1x-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/loongson,ls1x-wdt.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/watchdog/loongson,ls1x-wdt.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Loongson-1 Watchdog Timer +title: Loongson Watchdog Timer maintainers: - Keguang Zhang @@ -17,6 +17,7 @@ properties: enum: - loongson,ls1b-wdt - loongson,ls1c-wdt + - loongson,ls2k0300-wdt reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/watchdog/marvel.txt b/Documentation/devicetree/bindings/watchdog/marvel.txt deleted file mode 100644 index c1b67a78f00c77..00000000000000 --- a/Documentation/devicetree/bindings/watchdog/marvel.txt +++ /dev/null @@ -1,45 +0,0 @@ -* Marvell Orion Watchdog Time - -Required Properties: - -- Compatibility : "marvell,orion-wdt" - "marvell,armada-370-wdt" - "marvell,armada-xp-wdt" - "marvell,armada-375-wdt" - "marvell,armada-380-wdt" - -- reg : Should contain two entries: first one with the - timer control address, second one with the - rstout enable address. - -For "marvell,armada-375-wdt" and "marvell,armada-380-wdt": - -- reg : A third entry is mandatory and should contain the - shared mask/unmask RSTOUT address. - -Clocks required for compatibles = "marvell,orion-wdt", - "marvell,armada-370-wdt": -- clocks : Must contain a single entry describing the clock input - -Clocks required for compatibles = "marvell,armada-xp-wdt" - "marvell,armada-375-wdt" - "marvell,armada-380-wdt": -- clocks : Must contain an entry for each entry in clock-names. -- clock-names : Must include the following entries: - "nbclk" (L2/coherency fabric clock), - "fixed" (Reference 25 MHz fixed-clock). - -Optional properties: - -- interrupts : Contains the IRQ for watchdog expiration -- timeout-sec : Contains the watchdog timeout in seconds - -Example: - - wdt@20300 { - compatible = "marvell,orion-wdt"; - reg = <0x20300 0x28>, <0x20108 0x4>; - interrupts = <3>; - timeout-sec = <10>; - clocks = <&gate_clk 7>; - }; diff --git a/Documentation/devicetree/bindings/watchdog/marvell,orion-wdt.yaml b/Documentation/devicetree/bindings/watchdog/marvell,orion-wdt.yaml new file mode 100644 index 00000000000000..fdc7bc45dfdee6 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/marvell,orion-wdt.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/marvell,orion-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Orion Watchdog Timer + +maintainers: + - Andrew Lunn + - Gregory Clement + +properties: + compatible: + enum: + - marvell,orion-wdt + - marvell,armada-370-wdt + - marvell,armada-xp-wdt + - marvell,armada-375-wdt + - marvell,armada-380-wdt + + reg: + minItems: 2 + items: + - description: Timer control register address + - description: RSTOUT enable register address + - description: Shared mask/unmask RSTOUT register address + + clocks: + minItems: 1 + items: + - description: L2/coherency fabric clock input + - description: Reference 25 MHz fixed-clock supply + + clock-names: + minItems: 1 + items: + - const: nbclk + - const: fixed + + interrupts: + minItems: 1 + items: + - description: timeout + - description: pre-timeout + +allOf: + - $ref: watchdog.yaml# + - if: + properties: + compatible: + contains: + enum: + - marvell,armada-375-wdt + - marvell,armada-380-wdt + then: + properties: + reg: + minItems: 3 + else: + properties: + reg: + maxItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - marvell,armada-xp-wdt + - marvell,armada-375-wdt + - marvell,armada-380-wdt + then: + properties: + clocks: + minItems: 2 + clock-names: + minItems: 2 + interrupts: + minItems: 2 + + required: + - clock-names + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + watchdog@20300 { + compatible = "marvell,orion-wdt"; + reg = <0x20300 0x28>, <0x20108 0x4>; + interrupts = <3>; + timeout-sec = <10>; + clocks = <&gate_clk 7>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml b/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml index 442c21f12a3b27..defe0401ded0b4 100644 --- a/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml +++ b/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml @@ -8,7 +8,7 @@ title: Maxim 63xx Watchdog Timers maintainers: - Marc Zyngier - - Linus Walleij + - Linus Walleij allOf: - $ref: watchdog.yaml# diff --git a/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml b/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml index ba0bfd73ab62a8..953629cb9558b1 100644 --- a/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/mediatek,mtk-wdt.yaml @@ -41,6 +41,8 @@ properties: - mediatek,mt7623-wdt - mediatek,mt7629-wdt - mediatek,mt8173-wdt + - mediatek,mt8188-wdt + - mediatek,mt8189-wdt - mediatek,mt8365-wdt - mediatek,mt8516-wdt - const: mediatek,mt6589-wdt diff --git a/Documentation/devicetree/bindings/watchdog/omap-wdt.txt b/Documentation/devicetree/bindings/watchdog/omap-wdt.txt deleted file mode 100644 index 1fa20e453a2d00..00000000000000 --- a/Documentation/devicetree/bindings/watchdog/omap-wdt.txt +++ /dev/null @@ -1,15 +0,0 @@ -TI Watchdog Timer (WDT) Controller for OMAP - -Required properties: -- compatible : "ti,omap3-wdt" for OMAP3 or "ti,omap4-wdt" for OMAP4 -- ti,hwmods : Name of the hwmod associated to the WDT - -Optional properties: -- timeout-sec : default watchdog timeout in seconds - -Examples: - -wdt2: wdt@4a314000 { - compatible = "ti,omap4-wdt", "ti,omap3-wdt"; - ti,hwmods = "wd_timer2"; -}; diff --git a/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.yaml index dc6af204e8af52..a519422c371c14 100644 --- a/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/qcom,pm8916-wdt.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm PM8916 watchdog timer controller maintainers: - - Krzysztof Kozlowski + - Krzysztof Kozlowski allOf: - $ref: watchdog.yaml# diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml index 49e2b807db0bc9..54f5311ed016dc 100644 --- a/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml @@ -22,6 +22,7 @@ properties: - qcom,apss-wdt-ipq5332 - qcom,apss-wdt-ipq5424 - qcom,apss-wdt-ipq9574 + - qcom,apss-wdt-kaanapali - qcom,apss-wdt-msm8226 - qcom,apss-wdt-msm8974 - qcom,apss-wdt-msm8994 diff --git a/Documentation/devicetree/bindings/watchdog/renesas,r9a09g057-wdt.yaml b/Documentation/devicetree/bindings/watchdog/renesas,r9a09g057-wdt.yaml new file mode 100644 index 00000000000000..099200c4f1364f --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/renesas,r9a09g057-wdt.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/renesas,r9a09g057-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/V2H(P) Watchdog Timer (WDT) Controller + +maintainers: + - Lad Prabhakar + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,r9a09g047-wdt # RZ/G3E + - renesas,r9a09g056-wdt # RZ/V2N + - const: renesas,r9a09g057-wdt # RZ/V2H(P) + + - items: + - const: renesas,r9a09g087-wdt # RZ/N2H + - const: renesas,r9a09g077-wdt # RZ/T2H + + - enum: + - renesas,r9a09g057-wdt # RZ/V2H(P) + - renesas,r9a09g077-wdt # RZ/T2H + + reg: + minItems: 1 + maxItems: 2 + + clocks: + minItems: 1 + items: + - description: Register access clock + - description: Main clock + + clock-names: + minItems: 1 + items: + - const: pclk + - const: oscclk + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + timeout-sec: true + +required: + - compatible + - reg + - clocks + - clock-names + - power-domains + +allOf: + - $ref: watchdog.yaml# + + - if: + properties: + compatible: + contains: + const: renesas,r9a09g057-wdt + then: + properties: + reg: + maxItems: 1 + clocks: + minItems: 2 + clock-names: + minItems: 2 + else: + properties: + clocks: + maxItems: 1 + clock-names: + maxItems: 1 + reg: + minItems: 2 + resets: false + +additionalProperties: false + +examples: + - | + #include + + watchdog@11c00400 { + compatible = "renesas,r9a09g057-wdt"; + reg = <0x11c00400 0x400>; + clocks = <&cpg CPG_MOD 0x4b>, <&cpg CPG_MOD 0x4c>; + clock-names = "pclk", "oscclk"; + resets = <&cpg 0x75>; + power-domains = <&cpg>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/renesas,rcar-gen3-wwdt.yaml b/Documentation/devicetree/bindings/watchdog/renesas,rcar-gen3-wwdt.yaml new file mode 100644 index 00000000000000..ffafe9a6d3f5c0 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/renesas,rcar-gen3-wwdt.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/renesas,rcar-gen3-wwdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas Window Watchdog Timer (WWDT) Controller + +maintainers: + - Wolfram Sang + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,r8a77970-wwdt # R-Car V3M + - renesas,r8a77980-wwdt # R-Car V3H + - const: renesas,rcar-gen3-wwdt + + - items: + - enum: + - renesas,r8a779a0-wwdt # R-Car V3U + - renesas,r8a779f0-wwdt # R-Car S4 + - renesas,r8a779g0-wwdt # R-Car V4H + - renesas,r8a779h0-wwdt # R-Car V4M + - const: renesas,rcar-gen4-wwdt + + reg: + maxItems: 1 + + interrupts: + items: + - description: Pretimeout, 75% of overflow reached + - description: Error occurred + + interrupt-names: + items: + - const: pretimeout + - const: error + + clocks: + items: + - description: Counting clock + - description: Bus clock + + clock-names: + items: + - const: cnt + - const: bus + + resets: + minItems: 1 + maxItems: 2 + + reset-names: + minItems: 1 + items: + - const: cnt + - const: bus + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - resets + - reset-names + - power-domains + +allOf: + - $ref: watchdog.yaml# + + - if: + properties: + compatible: + contains: + enum: + - renesas,r8a779a0-wwdt + - renesas,r8a779f0-wwdt + then: + properties: + resets: + minItems: 2 + reset-names: + minItems: 2 + +additionalProperties: false + +examples: + - | + #include + #include + #include + + watchdog@ffc90000 { + compatible = "renesas,r8a779g0-wwdt", + "renesas,rcar-gen4-wwdt"; + reg = <0xffc90000 0x10>; + interrupts = , + ; + interrupt-names = "pretimeout", "error"; + clocks = <&cpg CPG_CORE R8A779G0_CLK_R>, + <&cpg CPG_CORE R8A779G0_CLK_SASYNCRT>; + clock-names = "cnt", "bus"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 1200>; + reset-names = "cnt"; + }; diff --git a/Documentation/devicetree/bindings/watchdog/renesas,rza-wdt.yaml b/Documentation/devicetree/bindings/watchdog/renesas,rza-wdt.yaml new file mode 100644 index 00000000000000..ba922c3f7b104f --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/renesas,rza-wdt.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/renesas,rza-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/A Watchdog Timer (WDT) Controller + +maintainers: + - Wolfram Sang + +properties: + compatible: + items: + - enum: + - renesas,r7s72100-wdt # RZ/A1 + - renesas,r7s9210-wdt # RZ/A2 + - const: renesas,rza-wdt # RZ/A + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + timeout-sec: true + +required: + - compatible + - reg + - clocks + +allOf: + - $ref: watchdog.yaml# + +additionalProperties: false + +examples: + - | + #include + #include + + watchdog@fcfe0000 { + compatible = "renesas,r7s72100-wdt", "renesas,rza-wdt"; + reg = <0xfcfe0000 0x6>; + interrupts = ; + clocks = <&p0_clk>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/renesas,rzg2l-wdt.yaml b/Documentation/devicetree/bindings/watchdog/renesas,rzg2l-wdt.yaml new file mode 100644 index 00000000000000..a4d06c9c8b86b6 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/renesas,rzg2l-wdt.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/renesas,rzg2l-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G2L Watchdog Timer (WDT) Controller + +maintainers: + - Biju Das + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,r9a07g043-wdt # RZ/G2UL and RZ/Five + - renesas,r9a07g044-wdt # RZ/G2{L,LC} + - renesas,r9a07g054-wdt # RZ/V2L + - renesas,r9a08g045-wdt # RZ/G3S + - const: renesas,rzg2l-wdt + + - items: + - const: renesas,r9a09g011-wdt # RZ/V2M + - const: renesas,rzv2m-wdt # RZ/V2M + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + items: + - description: Timeout + - description: Parity error + + interrupt-names: + minItems: 1 + items: + - const: wdt + - const: perrout + + clocks: + items: + - description: Register access clock + - description: Main clock + + clock-names: + items: + - const: pclk + - const: oscclk + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + timeout-sec: true + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + - resets + +allOf: + - $ref: watchdog.yaml# + + - if: + properties: + compatible: + contains: + const: renesas,rzg2l-wdt + then: + properties: + interrupts: + minItems: 2 + interrupt-names: + minItems: 2 + required: + - interrupt-names + else: + properties: + interrupts: + maxItems: 1 + interrupt-names: + maxItems: 1 + +additionalProperties: false + +examples: + - | + #include + #include + + watchdog@12800800 { + compatible = "renesas,r9a07g044-wdt", + "renesas,rzg2l-wdt"; + reg = <0x12800800 0x400>; + clocks = <&cpg CPG_MOD R9A07G044_WDT0_PCLK>, + <&cpg CPG_MOD R9A07G044_WDT0_CLK>; + clock-names = "pclk", "oscclk"; + interrupts = , + ; + interrupt-names = "wdt", "perrout"; + resets = <&cpg R9A07G044_WDT0_PRESETN>; + power-domains = <&cpg>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/renesas,rzn1-wdt.yaml b/Documentation/devicetree/bindings/watchdog/renesas,rzn1-wdt.yaml new file mode 100644 index 00000000000000..7e3ee533cd568f --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/renesas,rzn1-wdt.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/renesas,rzn1-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/N1 Watchdog Timer (WDT) Controller + +maintainers: + - Wolfram Sang + +properties: + compatible: + items: + - const: renesas,r9a06g032-wdt # RZ/N1D + - const: renesas,rzn1-wdt # RZ/N1 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + timeout-sec: true + +required: + - compatible + - reg + - interrupts + - clocks + +allOf: + - $ref: watchdog.yaml# + +additionalProperties: false + +examples: + - | + #include + #include + + watchdog@40008000 { + compatible = "renesas,r9a06g032-wdt", "renesas,rzn1-wdt"; + reg = <0x40008000 0x1000>; + interrupts = ; + clocks = <&sysctrl R9A06G032_CLK_WATCHDOG>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml index b6e60162c263c6..7aebc5a5cf17d2 100644 --- a/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml @@ -13,30 +13,6 @@ maintainers: properties: compatible: oneOf: - - items: - - enum: - - renesas,r7s72100-wdt # RZ/A1 - - renesas,r7s9210-wdt # RZ/A2 - - const: renesas,rza-wdt # RZ/A - - - items: - - enum: - - renesas,r9a06g032-wdt # RZ/N1D - - const: renesas,rzn1-wdt # RZ/N1 - - - items: - - enum: - - renesas,r9a07g043-wdt # RZ/G2UL and RZ/Five - - renesas,r9a07g044-wdt # RZ/G2{L,LC} - - renesas,r9a07g054-wdt # RZ/V2L - - renesas,r9a08g045-wdt # RZ/G3S - - const: renesas,rzg2l-wdt - - - items: - - enum: - - renesas,r9a09g011-wdt # RZ/V2M - - const: renesas,rzv2m-wdt # RZ/V2M - - items: - enum: - renesas,r8a7742-wdt # RZ/G1H @@ -75,47 +51,14 @@ properties: - renesas,r8a779h0-wdt # R-Car V4M - const: renesas,rcar-gen4-wdt # R-Car Gen4 - - items: - - enum: - - renesas,r9a09g047-wdt # RZ/G3E - - renesas,r9a09g056-wdt # RZ/V2N - - const: renesas,r9a09g057-wdt # RZ/V2H(P) - - - enum: - - renesas,r9a09g057-wdt # RZ/V2H(P) - - renesas,r9a09g077-wdt # RZ/T2H - - - items: - - const: renesas,r9a09g087-wdt # RZ/N2H - - const: renesas,r9a09g077-wdt # RZ/T2H - reg: - minItems: 1 - maxItems: 2 + maxItems: 1 interrupts: - minItems: 1 - items: - - description: Timeout - - description: Parity error - - interrupt-names: - minItems: 1 - items: - - const: wdt - - const: perrout + maxItems: 1 clocks: - minItems: 1 - items: - - description: Register access clock - - description: Main clock - - clock-names: - minItems: 1 - items: - - const: pclk - - const: oscclk + maxItems: 1 power-domains: maxItems: 1 @@ -129,6 +72,8 @@ required: - compatible - reg - clocks + - interrupts + - power-domains allOf: - $ref: watchdog.yaml# @@ -138,90 +83,11 @@ allOf: properties: compatible: contains: - enum: - - renesas,r9a09g077-wdt - - renesas,rza-wdt - - renesas,rzn1-wdt + const: renesas,r8a77980-wdt then: required: - - power-domains - resets - - if: - properties: - compatible: - contains: - enum: - - renesas,r9a09g057-wdt - - renesas,rzg2l-wdt - - renesas,rzv2m-wdt - then: - properties: - clocks: - minItems: 2 - clock-names: - minItems: 2 - required: - - clock-names - else: - properties: - clocks: - maxItems: 1 - - - if: - properties: - compatible: - contains: - enum: - - renesas,rzg2l-wdt - then: - properties: - interrupts: - minItems: 2 - interrupt-names: - minItems: 2 - required: - - interrupt-names - else: - properties: - interrupts: - maxItems: 1 - - - if: - properties: - compatible: - contains: - enum: - - renesas,r9a09g057-wdt - - renesas,r9a09g077-wdt - then: - properties: - interrupts: false - interrupt-names: false - else: - required: - - interrupts - - - if: - properties: - compatible: - contains: - const: renesas,r9a09g077-wdt - then: - properties: - resets: false - clock-names: - maxItems: 1 - reg: - minItems: 2 - required: - - clock-names - - power-domains - else: - properties: - reg: - maxItems: 1 - additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml index ef088e0f6917e5..609e98cdaaffdd 100644 --- a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml @@ -28,6 +28,7 @@ properties: - rockchip,rk3328-wdt - rockchip,rk3368-wdt - rockchip,rk3399-wdt + - rockchip,rk3506-wdt - rockchip,rk3562-wdt - rockchip,rk3568-wdt - rockchip,rk3576-wdt diff --git a/Documentation/devicetree/bindings/watchdog/ti,omap2-wdt.yaml b/Documentation/devicetree/bindings/watchdog/ti,omap2-wdt.yaml new file mode 100644 index 00000000000000..913b55222f2966 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/ti,omap2-wdt.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/ti,omap2-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI OMAP Watchdog Timer Controller + +maintainers: + - Aaro Koskinen + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + oneOf: + - enum: + - ti,omap2-wdt + - ti,omap3-wdt + - items: + - enum: + - ti,am4372-wdt + - ti,omap4-wdt + - ti,omap5-wdt + - const: ti,omap3-wdt + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + ti,hwmods: + description: Name of the hardware module associated with the watchdog. + $ref: /schemas/types.yaml#/definitions/string + deprecated: true + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + watchdog@48314000 { + compatible = "ti,omap3-wdt"; + reg = <0x48314000 0x80>; + ti,hwmods = "wd_timer2"; + }; diff --git a/Documentation/devicetree/bindings/watchdog/watchdog.yaml b/Documentation/devicetree/bindings/watchdog/watchdog.yaml index f0a584af1223eb..77ac23516d6d43 100644 --- a/Documentation/devicetree/bindings/watchdog/watchdog.yaml +++ b/Documentation/devicetree/bindings/watchdog/watchdog.yaml @@ -21,9 +21,10 @@ select: properties: $nodename: - pattern: "^(timer|watchdog)(@.*|-([0-9]|[1-9][0-9]+))?$" + pattern: "^(pmic|timer|watchdog)(@.*|-([0-9]|[1-9][0-9]+))?$" timeout-sec: + maxItems: 1 description: Contains the watchdog timeout in seconds. diff --git a/Documentation/doc-guide/checktransupdate.rst b/Documentation/doc-guide/checktransupdate.rst index dfaf9d37374768..7b25375cc6d977 100644 --- a/Documentation/doc-guide/checktransupdate.rst +++ b/Documentation/doc-guide/checktransupdate.rst @@ -27,15 +27,15 @@ Usage :: - ./scripts/checktransupdate.py --help + tools/docs/checktransupdate.py --help Please refer to the output of argument parser for usage details. Samples -- ``./scripts/checktransupdate.py -l zh_CN`` +- ``tools/docs/checktransupdate.py -l zh_CN`` This will print all the files that need to be updated in the zh_CN locale. -- ``./scripts/checktransupdate.py Documentation/translations/zh_CN/dev-tools/testing-overview.rst`` +- ``tools/docs/checktransupdate.py Documentation/translations/zh_CN/dev-tools/testing-overview.rst`` This will only print the status of the specified file. Then the output is something like: diff --git a/Documentation/doc-guide/contributing.rst b/Documentation/doc-guide/contributing.rst index 662c7a840cd5a4..f8047e63311378 100644 --- a/Documentation/doc-guide/contributing.rst +++ b/Documentation/doc-guide/contributing.rst @@ -152,7 +152,7 @@ generate links to that documentation. Adding ``kernel-doc`` directives to the documentation to bring those comments in can help the community derive the full value of the work that has gone into creating them. -The ``scripts/find-unused-docs.sh`` tool can be used to find these +The ``tools/docs/find-unused-docs.sh`` tool can be used to find these overlooked comments. Note that the most value comes from pulling in the documentation for diff --git a/Documentation/doc-guide/kernel-doc.rst b/Documentation/doc-guide/kernel-doc.rst index af9697e60165d2..fd89a6d56ea9af 100644 --- a/Documentation/doc-guide/kernel-doc.rst +++ b/Documentation/doc-guide/kernel-doc.rst @@ -405,6 +405,10 @@ Domain`_ references. ``%CONST`` Name of a constant. (No cross-referencing, just formatting.) + Examples:: + + %0 %NULL %-1 %-EFAULT %-EINVAL %-ENOMEM + ````literal```` A literal block that should be handled as-is. The output will use a ``monospaced font``. @@ -579,20 +583,23 @@ source. How to use kernel-doc to generate man pages ------------------------------------------- -If you just want to use kernel-doc to generate man pages you can do this -from the kernel git tree:: +To generate man pages for all files that contain kernel-doc markups, run:: + + $ make mandocs - $ scripts/kernel-doc -man \ - $(git grep -l '/\*\*' -- :^Documentation :^tools) \ - | scripts/split-man.pl /tmp/man +Or calling ``script-build-wrapper`` directly:: -Some older versions of git do not support some of the variants of syntax for -path exclusion. One of the following commands may work for those versions:: + $ ./tools/docs/sphinx-build-wrapper mandocs - $ scripts/kernel-doc -man \ - $(git grep -l '/\*\*' -- . ':!Documentation' ':!tools') \ - | scripts/split-man.pl /tmp/man +The output will be at ``/man`` directory inside the output directory +(by default: ``Documentation/output``). + +Optionally, it is possible to generate a partial set of man pages by +using SPHINXDIRS: + + $ make SPHINXDIRS=driver-api/media mandocs + +.. note:: - $ scripts/kernel-doc -man \ - $(git grep -l '/\*\*' -- . ":(exclude)Documentation" ":(exclude)tools") \ - | scripts/split-man.pl /tmp/man + When SPHINXDIRS={subdir} is used, it will only generate man pages for + the files explicitly inside a ``Documentation/{subdir}/.../*.rst`` file. diff --git a/Documentation/doc-guide/parse-headers.rst b/Documentation/doc-guide/parse-headers.rst index 204b025f13492d..a7bb01ff04eb0b 100644 --- a/Documentation/doc-guide/parse-headers.rst +++ b/Documentation/doc-guide/parse-headers.rst @@ -5,173 +5,168 @@ Including uAPI header files Sometimes, it is useful to include header files and C example codes in order to describe the userspace API and to generate cross-references between the code and the documentation. Adding cross-references for -userspace API files has an additional vantage: Sphinx will generate warnings +userspace API files has an additional advantage: Sphinx will generate warnings if a symbol is not found at the documentation. That helps to keep the uAPI documentation in sync with the Kernel changes. -The :ref:`parse_headers.pl ` provide a way to generate such +The :ref:`parse_headers.py ` provides a way to generate such cross-references. It has to be called via Makefile, while building the documentation. Please see ``Documentation/userspace-api/media/Makefile`` for an example about how to use it inside the Kernel tree. .. _parse_headers: -parse_headers.pl -^^^^^^^^^^^^^^^^ +tools/docs/parse_headers.py +^^^^^^^^^^^^^^^^^^^^^^^^^^^ NAME **** - -parse_headers.pl - parse a C file, in order to identify functions, structs, +parse_headers.py - parse a C file, in order to identify functions, structs, enums and defines and create cross-references to a Sphinx book. +USAGE +***** + +parse-headers.py [-h] [-d] [-t] ``FILE_IN`` ``FILE_OUT`` ``FILE_RULES`` SYNOPSIS ******** - -\ **parse_headers.pl**\ [] [] - -Where can be: --debug, --help or --usage. - - -OPTIONS -******* - - - -\ **--debug**\ - - Put the script in verbose mode, useful for debugging. - - - -\ **--usage**\ - - Prints a brief help message and exits. - - - -\ **--help**\ - - Prints a more detailed help message and exits. - - -DESCRIPTION -*********** - - -Convert a C header or source file (C_FILE), into a reStructuredText +Converts a C header or source file ``FILE_IN`` into a ReStructured Text included via ..parsed-literal block with cross-references for the documentation files that describe the API. It accepts an optional -EXCEPTIONS_FILE with describes what elements will be either ignored or -be pointed to a non-default reference. - -The output is written at the (OUT_FILE). +``FILE_RULES`` file to describe what elements will be either ignored or +be pointed to a non-default reference type/name. -It is capable of identifying defines, functions, structs, typedefs, -enums and enum symbols and create cross-references for all of them. -It is also capable of distinguish #define used for specifying a Linux -ioctl. +The output is written at ``FILE_OUT``. -The EXCEPTIONS_FILE contain two types of statements: \ **ignore**\ or \ **replace**\ . +It is capable of identifying ``define``, ``struct``, ``typedef``, ``enum`` +and enum ``symbol``, creating cross-references for all of them. -The syntax for the ignore tag is: +It is also capable of distinguishing ``#define`` used for specifying +Linux-specific macros used to define ``ioctl``. +The optional ``FILE_RULES`` contains a set of rules like:: -ignore \ **type**\ \ **name**\ + ignore ioctl VIDIOC_ENUM_FMT + replace ioctl VIDIOC_DQBUF vidioc_qbuf + replace define V4L2_EVENT_MD_FL_HAVE_FRAME_SEQ :c:type:`v4l2_event_motion_det` -The \ **ignore**\ means that it won't generate cross references for a -\ **name**\ symbol of type \ **type**\ . +POSITIONAL ARGUMENTS +******************** -The syntax for the replace tag is: + ``FILE_IN`` + Input C file + ``FILE_OUT`` + Output RST file -replace \ **type**\ \ **name**\ \ **new_value**\ + ``FILE_RULES`` + Exceptions file (optional) -The \ **replace**\ means that it will generate cross references for a -\ **name**\ symbol of type \ **type**\ , but, instead of using the default -replacement rule, it will use \ **new_value**\ . - -For both statements, \ **type**\ can be either one of the following: +OPTIONS +******* + ``-h``, ``--help`` + show a help message and exit + ``-d``, ``--debug`` + Increase debug level. Can be used multiple times + ``-t``, ``--toc`` + instead of a literal block, outputs a TOC table at the RST file -\ **ioctl**\ - The ignore or replace statement will apply to ioctl definitions like: +DESCRIPTION +*********** - #define VIDIOC_DBG_S_REGISTER _IOW('V', 79, struct v4l2_dbg_register) +Creates an enriched version of a Kernel header file with cross-links +to each C data structure type, from ``FILE_IN``, formatting it with +reStructuredText notation, either as-is or as a table of contents. +It accepts an optional ``FILE_RULES`` which describes what elements will be +either ignored or be pointed to a non-default reference, and optionally +defines the C namespace to be used. +It is meant to allow having more comprehensive documentation, where +uAPI headers will create cross-reference links to the code. -\ **define**\ +The output is written at the ``FILE_OUT``. - The ignore or replace statement will apply to any other #define found - at C_FILE. +The ``FILE_RULES`` may contain contain three types of statements: +**ignore**, **replace** and **namespace**. +By default, it create rules for all symbols and defines, but it also +allows parsing an exception file. Such file contains a set of rules +using the syntax below: +1. Ignore rules: -\ **typedef**\ + ignore *type* *symbol* - The ignore or replace statement will apply to typedef statements at C_FILE. +Removes the symbol from reference generation. +2. Replace rules: + replace *type* *old_symbol* *new_reference* -\ **struct**\ + Replaces *old_symbol* with a *new_reference*. + The *new_reference* can be: - The ignore or replace statement will apply to the name of struct statements - at C_FILE. + - A simple symbol name; + - A full Sphinx reference. +3. Namespace rules + namespace *namespace* -\ **enum**\ + Sets C *namespace* to be used during cross-reference generation. Can + be overridden by replace rules. - The ignore or replace statement will apply to the name of enum statements - at C_FILE. +On ignore and replace rules, *type* can be: + - ioctl: + for defines of the form ``_IO*``, e.g., ioctl definitions + - define: + for other defines -\ **symbol**\ + - symbol: + for symbols defined within enums; - The ignore or replace statement will apply to the name of enum value - at C_FILE. + - typedef: + for typedefs; - For replace statements, \ **new_value**\ will automatically use :c:type: - references for \ **typedef**\ , \ **enum**\ and \ **struct**\ types. It will use :ref: - for \ **ioctl**\ , \ **define**\ and \ **symbol**\ types. The type of reference can - also be explicitly defined at the replace statement. + - enum: + for the name of a non-anonymous enum; + - struct: + for structs. EXAMPLES ******** +- Ignore a define ``_VIDEODEV2_H`` at ``FILE_IN``:: -ignore define _VIDEODEV2_H - - -Ignore a #define _VIDEODEV2_H at the C_FILE. - -ignore symbol PRIVATE - + ignore define _VIDEODEV2_H -On a struct like: +- On an data structure like this enum:: -enum foo { BAR1, BAR2, PRIVATE }; + enum foo { BAR1, BAR2, PRIVATE }; -It won't generate cross-references for \ **PRIVATE**\ . + It won't generate cross-references for ``PRIVATE``:: -replace symbol BAR1 :c:type:\`foo\` -replace symbol BAR2 :c:type:\`foo\` + ignore symbol PRIVATE + At the same struct, instead of creating one cross reference per symbol, + make them all point to the ``enum foo`` C type:: -On a struct like: + replace symbol BAR1 :c:type:\`foo\` + replace symbol BAR2 :c:type:\`foo\` -enum foo { BAR1, BAR2, PRIVATE }; -It will make the BAR1 and BAR2 enum symbols to cross reference the foo -symbol at the C domain. +- Use C namespace ``MC`` for all symbols at ``FILE_IN``:: + namespace MC BUGS **** @@ -184,7 +179,7 @@ COPYRIGHT ********* -Copyright (c) 2016 by Mauro Carvalho Chehab . +Copyright (c) 2016, 2025 by Mauro Carvalho Chehab . License GPLv2: GNU GPL version 2 . diff --git a/Documentation/doc-guide/sphinx.rst b/Documentation/doc-guide/sphinx.rst index 607589592bfbde..51c370260f3b34 100644 --- a/Documentation/doc-guide/sphinx.rst +++ b/Documentation/doc-guide/sphinx.rst @@ -106,7 +106,7 @@ There's a script that automatically checks for Sphinx dependencies. If it can recognize your distribution, it will also give a hint about the install command line options for your distro:: - $ ./scripts/sphinx-pre-install + $ ./tools/docs/sphinx-pre-install Checking if the needed tools for Fedora release 26 (Twenty Six) are available Warning: better to also install "texlive-luatex85". You should run: @@ -116,7 +116,7 @@ command line options for your distro:: . sphinx_2.4.4/bin/activate pip install -r Documentation/sphinx/requirements.txt - Can't build as 1 mandatory dependency is missing at ./scripts/sphinx-pre-install line 468. + Can't build as 1 mandatory dependency is missing at ./tools/docs/sphinx-pre-install line 468. By default, it checks all the requirements for both html and PDF, including the requirements for images, math expressions and LaTeX build, and assumes @@ -149,7 +149,7 @@ a venv with it with, and install minimal requirements with:: A more comprehensive test can be done by using: - scripts/test_doc_build.py + tools/docs/test_doc_build.py Such script create one Python venv per supported version, optionally building documentation for a range of Sphinx versions. diff --git a/Documentation/driver-api/cxl/allocation/page-allocator.rst b/Documentation/driver-api/cxl/allocation/page-allocator.rst index 7b8fe1b8d5bbb8..3fa584a248bdd3 100644 --- a/Documentation/driver-api/cxl/allocation/page-allocator.rst +++ b/Documentation/driver-api/cxl/allocation/page-allocator.rst @@ -41,37 +41,6 @@ To simplify this, the page allocator will prefer :code:`ZONE_MOVABLE` over will fallback to allocate from :code:`ZONE_NORMAL`. -Zone and Node Quirks -==================== -Let's consider a configuration where the local DRAM capacity is largely onlined -into :code:`ZONE_NORMAL`, with no :code:`ZONE_MOVABLE` capacity present. The -CXL capacity has the opposite configuration - all onlined in -:code:`ZONE_MOVABLE`. - -Under the default allocation policy, the page allocator will completely skip -:code:`ZONE_MOVABLE` as a valid allocation target. This is because, as of -Linux v6.15, the page allocator does (approximately) the following: :: - - for (each zone in local_node): - - for (each node in fallback_order): - - attempt_allocation(gfp_flags); - -Because the local node does not have :code:`ZONE_MOVABLE`, the CXL node is -functionally unreachable for direct allocation. As a result, the only way -for CXL capacity to be used is via `demotion` in the reclaim path. - -This configuration also means that if the DRAM ndoe has :code:`ZONE_MOVABLE` -capacity - when that capacity is depleted, the page allocator will actually -prefer CXL :code:`ZONE_MOVABLE` pages over DRAM :code:`ZONE_NORMAL` pages. - -We may wish to invert this priority in future Linux versions. - -If `demotion` and `swap` are disabled, Linux will begin to cause OOM crashes -when the DRAM nodes are depleted. See the reclaim section for more details. - - CGroups and CPUSets =================== Finally, assuming CXL memory is reachable via the page allocation (i.e. onlined diff --git a/Documentation/driver-api/dpll.rst b/Documentation/driver-api/dpll.rst index be1fc643b645e3..83118c728ed90c 100644 --- a/Documentation/driver-api/dpll.rst +++ b/Documentation/driver-api/dpll.rst @@ -198,26 +198,28 @@ be requested with the same attribute with ``DPLL_CMD_DEVICE_SET`` command. ================================== ====================================== Device may also provide ability to adjust a signal phase on a pin. -If pin phase adjustment is supported, minimal and maximal values that pin -handle shall be provide to the user on ``DPLL_CMD_PIN_GET`` respond -with ``DPLL_A_PIN_PHASE_ADJUST_MIN`` and ``DPLL_A_PIN_PHASE_ADJUST_MAX`` +If pin phase adjustment is supported, minimal and maximal values and +granularity that pin handle shall be provided to the user on +``DPLL_CMD_PIN_GET`` respond with ``DPLL_A_PIN_PHASE_ADJUST_MIN``, +``DPLL_A_PIN_PHASE_ADJUST_MAX`` and ``DPLL_A_PIN_PHASE_ADJUST_GRAN`` attributes. Configured phase adjust value is provided with ``DPLL_A_PIN_PHASE_ADJUST`` attribute of a pin, and value change can be requested with the same attribute with ``DPLL_CMD_PIN_SET`` command. - =============================== ====================================== - ``DPLL_A_PIN_ID`` configured pin id - ``DPLL_A_PIN_PHASE_ADJUST_MIN`` attr minimum value of phase adjustment - ``DPLL_A_PIN_PHASE_ADJUST_MAX`` attr maximum value of phase adjustment - ``DPLL_A_PIN_PHASE_ADJUST`` attr configured value of phase - adjustment on parent dpll device - ``DPLL_A_PIN_PARENT_DEVICE`` nested attribute for requesting - configuration on given parent dpll - device - ``DPLL_A_PIN_PARENT_ID`` parent dpll device id - ``DPLL_A_PIN_PHASE_OFFSET`` attr measured phase difference - between a pin and parent dpll device - =============================== ====================================== + ================================ ========================================== + ``DPLL_A_PIN_ID`` configured pin id + ``DPLL_A_PIN_PHASE_ADJUST_GRAN`` attr granularity of phase adjustment value + ``DPLL_A_PIN_PHASE_ADJUST_MIN`` attr minimum value of phase adjustment + ``DPLL_A_PIN_PHASE_ADJUST_MAX`` attr maximum value of phase adjustment + ``DPLL_A_PIN_PHASE_ADJUST`` attr configured value of phase + adjustment on parent dpll device + ``DPLL_A_PIN_PARENT_DEVICE`` nested attribute for requesting + configuration on given parent dpll + device + ``DPLL_A_PIN_PARENT_ID`` parent dpll device id + ``DPLL_A_PIN_PHASE_OFFSET`` attr measured phase difference + between a pin and parent dpll device + ================================ ========================================== All phase related values are provided in pico seconds, which represents time difference between signals phase. The negative value means that @@ -384,6 +386,8 @@ according to attribute purpose. frequencies ``DPLL_A_PIN_ANY_FREQUENCY_MIN`` attr minimum value of frequency ``DPLL_A_PIN_ANY_FREQUENCY_MAX`` attr maximum value of frequency + ``DPLL_A_PIN_PHASE_ADJUST_GRAN`` attr granularity of phase + adjustment value ``DPLL_A_PIN_PHASE_ADJUST_MIN`` attr minimum value of phase adjustment ``DPLL_A_PIN_PHASE_ADJUST_MAX`` attr maximum value of phase diff --git a/Documentation/driver-api/driver-model/devres.rst b/Documentation/driver-api/driver-model/devres.rst index 2b36ebde9cece8..0198ac65e87449 100644 --- a/Documentation/driver-api/driver-model/devres.rst +++ b/Documentation/driver-api/driver-model/devres.rst @@ -383,7 +383,6 @@ NET PER-CPU MEM devm_alloc_percpu() - devm_free_percpu() PCI devm_pci_alloc_host_bridge() : managed PCI host bridge allocation diff --git a/Documentation/driver-api/firmware/efi/index.rst b/Documentation/driver-api/firmware/efi/index.rst index 4fe8abba9fc6bf..5a6b6229592c9a 100644 --- a/Documentation/driver-api/firmware/efi/index.rst +++ b/Documentation/driver-api/firmware/efi/index.rst @@ -1,11 +1,16 @@ .. SPDX-License-Identifier: GPL-2.0 -============ -UEFI Support -============ +==================================================== +Unified Extensible Firmware Interface (UEFI) Support +==================================================== UEFI stub library functions =========================== .. kernel-doc:: drivers/firmware/efi/libstub/mem.c :internal: + +UEFI Common Platform Error Record (CPER) functions +================================================== + +.. kernel-doc:: drivers/firmware/efi/cper.c diff --git a/Documentation/driver-api/generic_pt.rst b/Documentation/driver-api/generic_pt.rst new file mode 100644 index 00000000000000..fd29d1b525e51d --- /dev/null +++ b/Documentation/driver-api/generic_pt.rst @@ -0,0 +1,137 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================== +Generic Radix Page Table +======================== + +.. kernel-doc:: include/linux/generic_pt/common.h + :doc: Generic Radix Page Table + +.. kernel-doc:: drivers/iommu/generic_pt/pt_defs.h + :doc: Generic Page Table Language + +Usage +===== + +Generic PT is structured as a multi-compilation system. Since each format +provides an API using a common set of names there can be only one format active +within a compilation unit. This design avoids function pointers around the low +level API. + +Instead the function pointers can end up at the higher level API (i.e. +map/unmap, etc.) and the per-format code can be directly inlined into the +per-format compilation unit. For something like IOMMU each format will be +compiled into a per-format IOMMU operations kernel module. + +For this to work the .c file for each compilation unit will include both the +format headers and the generic code for the implementation. For instance in an +implementation compilation unit the headers would normally be included as +follows: + +generic_pt/fmt/iommu_amdv1.c:: + + #include + #include "defs_amdv1.h" + #include "../pt_defs.h" + #include "amdv1.h" + #include "../pt_common.h" + #include "../pt_iter.h" + #include "../iommu_pt.h" /* The IOMMU implementation */ + +iommu_pt.h includes definitions that will generate the operations functions for +map/unmap/etc. using the definitions provided by AMDv1. The resulting module +will have exported symbols named like pt_iommu_amdv1_init(). + +Refer to drivers/iommu/generic_pt/fmt/iommu_template.h for an example of how the +IOMMU implementation uses multi-compilation to generate per-format ops structs +pointers. + +The format code is written so that the common names arise from #defines to +distinct format specific names. This is intended to aid debuggability by +avoiding symbol clashes across all the different formats. + +Exported symbols and other global names are mangled using a per-format string +via the NS() helper macro. + +The format uses struct pt_common as the top-level struct for the table, +and each format will have its own struct pt_xxx which embeds it to store +format-specific information. + +The implementation will further wrap struct pt_common in its own top-level +struct, such as struct pt_iommu_amdv1. + +Format functions at the struct pt_common level +---------------------------------------------- + +.. kernel-doc:: include/linux/generic_pt/common.h + :identifiers: +.. kernel-doc:: drivers/iommu/generic_pt/pt_common.h + +Iteration Helpers +----------------- + +.. kernel-doc:: drivers/iommu/generic_pt/pt_iter.h + +Writing a Format +---------------- + +It is best to start from a simple format that is similar to the target. x86_64 +is usually a good reference for something simple, and AMDv1 is something fairly +complete. + +The required inline functions need to be implemented in the format header. +These should all follow the standard pattern of:: + + static inline pt_oaddr_t amdv1pt_entry_oa(const struct pt_state *pts) + { + [..] + } + #define pt_entry_oa amdv1pt_entry_oa + +where a uniquely named per-format inline function provides the implementation +and a define maps it to the generic name. This is intended to make debug symbols +work better. inline functions should always be used as the prototypes in +pt_common.h will cause the compiler to validate the function signature to +prevent errors. + +Review pt_fmt_defaults.h to understand some of the optional inlines. + +Once the format compiles then it should be run through the generic page table +kunit test in kunit_generic_pt.h using kunit. For example:: + + $ tools/testing/kunit/kunit.py run --build_dir build_kunit_x86_64 --arch x86_64 --kunitconfig ./drivers/iommu/generic_pt/.kunitconfig amdv1_fmt_test.* + [...] + [11:15:08] Testing complete. Ran 9 tests: passed: 9 + [11:15:09] Elapsed time: 3.137s total, 0.001s configuring, 2.368s building, 0.311s running + +The generic tests are intended to prove out the format functions and give +clearer failures to speed up finding the problems. Once those pass then the +entire kunit suite should be run. + +IOMMU Invalidation Features +--------------------------- + +Invalidation is how the page table algorithms synchronize with a HW cache of the +page table memory, typically called the TLB (or IOTLB for IOMMU cases). + +The TLB can store present PTEs, non-present PTEs and table pointers, depending +on its design. Every HW has its own approach on how to describe what has changed +to have changed items removed from the TLB. + +PT_FEAT_FLUSH_RANGE +~~~~~~~~~~~~~~~~~~~ + +PT_FEAT_FLUSH_RANGE is the easiest scheme to understand. It tries to generate a +single range invalidation for each operation, over-invalidating if there are +gaps of VA that don't need invalidation. This trades off impacted VA for number +of invalidation operations. It does not keep track of what is being invalidated; +however, if pages have to be freed then page table pointers have to be cleaned +from the walk cache. The range can start/end at any page boundary. + +PT_FEAT_FLUSH_RANGE_NO_GAPS +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +PT_FEAT_FLUSH_RANGE_NO_GAPS is similar to PT_FEAT_FLUSH_RANGE; however, it tries +to minimize the amount of impacted VA by issuing extra flush operations. This is +useful if the cost of processing VA is very high, for instance because a +hypervisor is processing the page table with a shadowing algorithm. diff --git a/Documentation/driver-api/gpio/index.rst b/Documentation/driver-api/gpio/index.rst index 87929840e85a29..bee58f709b9aca 100644 --- a/Documentation/driver-api/gpio/index.rst +++ b/Documentation/driver-api/gpio/index.rst @@ -15,6 +15,7 @@ Contents: legacy-boards drivers-on-gpio bt8xxgpio + pca953x Core ==== diff --git a/Documentation/driver-api/gpio/pca953x.rst b/Documentation/driver-api/gpio/pca953x.rst new file mode 100644 index 00000000000000..4bd7cf1120cbac --- /dev/null +++ b/Documentation/driver-api/gpio/pca953x.rst @@ -0,0 +1,552 @@ +============================================ +PCA953x I²C GPIO expander compatibility list +============================================ + +:Author: Levente Révész + +I went through all the datasheets and created this note listing +chip functions and register layouts. + +Overview of chips +================= + +Chips with the basic 4 registers +-------------------------------- + +These chips have 4 register banks: input, output, invert and direction. +Each of these banks contains (lines/8) registers, one for each GPIO port. + +Banks offset is always a power of 2: + +- 4 lines -> bank offset is 1 +- 8 lines -> bank offset is 1 +- 16 lines -> bank offset is 2 +- 24 lines -> bank offset is 4 +- 32 lines -> bank offset is 4 +- 40 lines -> bank offset is 8 + +For example, register layout of GPIO expander with 24 lines: + ++------+-----------------+--------+ +| addr | function | bank | ++======+=================+========+ +| 00 | input port0 | | ++------+-----------------+ | +| 01 | input port1 | bank 0 | ++------+-----------------+ | +| 02 | input port2 | | ++------+-----------------+--------+ +| 03 | n/a | | ++------+-----------------+--------+ +| 04 | output port0 | | ++------+-----------------+ | +| 05 | output port1 | bank 1 | ++------+-----------------+ | +| 06 | output port2 | | ++------+-----------------+--------+ +| 07 | n/a | | ++------+-----------------+--------+ +| 08 | invert port0 | | ++------+-----------------+ | +| 09 | invert port1 | bank 2 | ++------+-----------------+ | +| 0A | invert port2 | | ++------+-----------------+--------+ +| 0B | n/a | | ++------+-----------------+--------+ +| 0C | direction port0 | | ++------+-----------------+ | +| 0D | direction port1 | bank 3 | ++------+-----------------+ | +| 0E | direction port2 | | ++------+-----------------+--------+ +| 0F | n/a | | ++------+-----------------+--------+ + +.. note:: + This is followed by all supported chips, except by pcal6534. + +The table below shows the offsets for each of the compatible chips: + +========== ===== ========= ===== ====== ====== ========= +compatible lines interrupt input output invert direction +========== ===== ========= ===== ====== ====== ========= +pca9536 4 no 00 01 02 03 +pca9537 4 yes 00 01 02 03 +pca6408 8 yes 00 01 02 03 +tca6408 8 yes 00 01 02 03 +pca9534 8 yes 00 01 02 03 +pca9538 8 yes 00 01 02 03 +pca9554 8 yes 00 01 02 03 +tca9554 8 yes 00 01 02 03 +pca9556 8 no 00 01 02 03 +pca9557 8 no 00 01 02 03 +pca6107 8 yes 00 01 02 03 +pca6416 16 yes 00 02 04 06 +tca6416 16 yes 00 02 04 06 +pca9535 16 yes 00 02 04 06 +pca9539 16 yes 00 02 04 06 +tca9539 16 yes 00 02 04 06 +pca9555 16 yes 00 02 04 06 +max7318 16 yes 00 02 04 06 +tca6424 24 yes 00 04 08 0C +========== ===== ========= ===== ====== ====== ========= + +Chips with additional timeout_en register +----------------------------------------- + +These Maxim chips have a bus timeout function which can be enabled in +the timeout_en register. This is present in only two chips. Defaults to +timeout disabled. + +========== ===== ========= ===== ====== ====== ========= ========== +compatible lines interrupt input output invert direction timeout_en +========== ===== ========= ===== ====== ====== ========= ========== +max7310 8 no 00 01 02 03 04 +max7312 16 yes 00 02 04 06 08 +========== ===== ========= ===== ====== ====== ========= ========== + +Chips with additional int_mask register +--------------------------------------- + +These chips have an interrupt mask register in addition to the 4 basic +registers. The interrupt masks default to all interrupts disabled. To +use interrupts with these chips, the driver has to set the int_mask +register. + +========== ===== ========= ===== ====== ====== ========= ======== +compatible lines interrupt input output invert direction int_mask +========== ===== ========= ===== ====== ====== ========= ======== +pca9505 40 yes 00 08 10 18 20 +pca9506 40 yes 00 08 10 18 20 +========== ===== ========= ===== ====== ====== ========= ======== + +Chips with additional int_mask and out_conf registers +----------------------------------------------------- + +This chip has an interrupt mask register, and an output port +configuration register, which can select between push-pull and +open-drain modes. Each bit controls two lines. Both of these registers +are present in PCAL chips as well, albeit the out_conf works +differently. + +========== ===== ========= ===== ====== ====== ========= ======== ======== +compatible lines interrupt input output invert direction int_mask out_conf +========== ===== ========= ===== ====== ====== ========= ======== ======== +pca9698 40 yes 00 08 10 18 20 28 +========== ===== ========= ===== ====== ====== ========= ======== ======== + +pca9698 also has a "master output" register for setting all outputs per +port to the same value simultaneously, and a chip specific mode register +for various additional chip settings. + +========== ============= ==== +compatible master_output mode +========== ============= ==== +pca9698 29 2A +========== ============= ==== + +Chips with LED blink and intensity control +------------------------------------------ + +These Maxim chips have no invert register. + +They have two sets of output registers (output0 and output1). An internal +timer alternates the effective output between the values set in these +registers, if blink mode is enabled in the blink register. The +master_intensity register and the intensity registers together define +the PWM intensity value for each pair of outputs. + +These chips can be used as simple GPIO expanders if the driver handles the +input, output0 and direction registers. + +========== ===== ========= ===== ======= ========= ======= ================ ===== ========= +compatible lines interrupt input output0 direction output1 master_intensity blink intensity +========== ===== ========= ===== ======= ========= ======= ================ ===== ========= +max7315 8 yes 00 01 03 09 0E 0F 10 +max7313 16 yes 00 02 06 0A 0E 0F 10 +========== ===== ========= ===== ======= ========= ======= ================ ===== ========= + +Basic PCAL chips +---------------- + +========== ===== ========= ===== ====== ====== ========= +compatible lines interrupt input output invert direction +========== ===== ========= ===== ====== ====== ========= +pcal6408 8 yes 00 01 02 03 +pcal9554b 8 yes 00 01 02 03 +pcal6416 16 yes 00 02 04 06 +pcal9535 16 yes 00 02 04 06 +pcal9555a 16 yes 00 02 04 06 +========== ===== ========= ===== ====== ====== ========= + +These chips have several additional features: + + 1. output drive strength setting (out_strength) + 2. input latch (in_latch) + 3. pull-up/pull-down (pull_in, pull_sel) + 4. push-pull/open-drain outputs (out_conf) + 5. interrupt mask and interrupt status (int_mask, int_status) + +========== ============ ======== ======= ======== ======== ========== ======== +compatible out_strength in_latch pull_en pull_sel int_mask int_status out_conf +========== ============ ======== ======= ======== ======== ========== ======== +pcal6408 40 42 43 44 45 46 4F +pcal9554b 40 42 43 44 45 46 4F +pcal6416 40 44 46 48 4A 4C 4F +pcal9535 40 44 46 48 4A 4C 4F +pcal9555a 40 44 46 48 4A 4C 4F +========== ============ ======== ======= ======== ======== ========== ======== + +Currently the driver has support for the input latch, pull-up/pull-down +and uses int_mask and int_status for interrupts. + +PCAL chips with extended interrupt and output configuration functions +--------------------------------------------------------------------- + +========== ===== ========= ===== ====== ====== ========= +compatible lines interrupt input output invert direction +========== ===== ========= ===== ====== ====== ========= +pcal6524 24 yes 00 04 08 0C +pcal6534 34 yes 00 05 0A 0F +========== ===== ========= ===== ====== ====== ========= + +These chips have the full PCAL register set, plus the following functions: + + 1. interrupt event selection: level, rising, falling, any edge + 2. clear interrupt status per line + 3. read input without clearing interrupt status + 4. individual output config (push-pull/open-drain) per output line + 5. debounce inputs + +========== ============ ======== ======= ======== ======== ========== ======== +compatible out_strength in_latch pull_en pull_sel int_mask int_status out_conf +========== ============ ======== ======= ======== ======== ========== ======== +pcal6524 40 48 4C 50 54 58 5C +pcal6534 30 3A 3F 44 49 4E 53 +========== ============ ======== ======= ======== ======== ========== ======== + +========== ======== ========= ============ ============== ======== ============== +compatible int_edge int_clear input_status indiv_out_conf debounce debounce_count +========== ======== ========= ============ ============== ======== ============== +pcal6524 60 68 6C 70 74 76 +pcal6534 54 5E 63 68 6D 6F +========== ======== ========= ============ ============== ======== ============== + +As can be seen in the table above, pcal6534 does not follow the usual +bank spacing rule. Its banks are closely packed instead. + +PCA957X chips with a completely different register layout +--------------------------------------------------------- + +These chips have the basic 4 registers, but at unusual addresses. + +Additionally, they have: + + 1. pull-up/pull-down (pull_sel) + 2. a global pull enable, defaults to disabled (config) + 3. interrupt mask, interrupt status (int_mask, int_status) + +========== ===== ========= ===== ====== ====== ======== ========= ====== ======== ========== +compatible lines interrupt input invert config pull_sel direction output int_mask int_status +========== ===== ========= ===== ====== ====== ======== ========= ====== ======== ========== +pca9574 8 yes 00 01 02 03 04 05 06 07 +pca9575 16 yes 00 02 04 06 08 0A 0C 0E +========== ===== ========= ===== ====== ====== ======== ========= ====== ======== ========== + +Currently the driver supports none of the advanced features. + +XRA1202 +------- + +Basic 4 registers, plus advanced features: + + 1. interrupt mask, defaults to interrupts disabled + 2. interrupt status + 3. interrupt event selection, level, rising, falling, any edge + (int_mask, rising_mask, falling_mask) + 4. pull-up (no pull-down) + 5. tri-state + 6. debounce + +========== ===== ========= ===== ====== ====== ========= ========= +compatible lines interrupt input output invert direction pullup_en +========== ===== ========= ===== ====== ====== ========= ========= +xra1202 8 yes 00 01 02 03 04 +========== ===== ========= ===== ====== ====== ========= ========= + +========== ======== ======== ========== =========== ============ ======== +compatible int_mask tristate int_status rising_mask falling_mask debounce +========== ======== ======== ========== =========== ============ ======== +xra1202 05 06 07 08 09 0A +========== ======== ======== ========== =========== ============ ======== + +Overview of functions +===================== + +This section lists chip functions that are supported by the driver +already, or are at least common in multiple chips. + +Input, Output, Invert, Direction +-------------------------------- + +The basic 4 GPIO functions are present in all but one chip category, i.e. +`Chips with LED blink and intensity control`_ are missing the invert +register. + +3 different layouts are used for these registers: + + 1. banks 0, 1, 2, 3 with bank offsets of 2^n + - all other chips + + 2. banks 0, 1, 2, 3 with closely packed banks + - pcal6534 + + 3. banks 0, 5, 1, 4 with bank offsets of 2^n + - pca9574 + - pca9575 + +Interrupts +---------- + +Only an interrupt mask register +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The same layout is used for all of these: + + 1. bank 5 with bank offsets of 2^n + - pca9505 + - pca9506 + - pca9698 + +Interrupt mask and interrupt status registers +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +These work the same way in all of the chips: mask and status have +one bit per line, 1 in the mask means interrupt enabled. + +Layouts: + + 1. base offset 0x40, bank 5 and bank 6, bank offsets of 2^n + - pcal6408 + - pcal6416 + - pcal9535 + - pcal9554b + - pcal9555a + - pcal6524 + + 2. base offset 0x30, bank 5 and 6, closely packed banks + - pcal6534 + + 3. bank 6 and 7, bank offsets of 2^n + - pca9574 + - pca9575 + + 4. bank 5 and 7, bank offsets of 2^n + - xra1202 + +Interrupt on specific edges +~~~~~~~~~~~~~~~~~~~~~~~~~~~ +`PCAL chips with extended interrupt and output configuration functions`_ +have an int_edge register. This contains 2 bits per line, one of 4 events +can be selected for each line: + + 0: level, 1: rising edge, 2: falling edge, 3: any edge + +Layouts: + + 1. base offset 0x40, bank 7, bank offsets of 2^n + + - pcal6524 + + 2. base offset 0x30, bank 7 + offset 0x01, closely packed banks + (out_conf is 1 byte, not (lines/8) bytes, hence the 0x01 offset) + + - pcal6534 + +`XRA1202`_ chips have a different mechanism for the same thing: they have +a rising mask and a falling mask, with one bit per line. + +Layout: + + 1. bank 5, bank offsets of 2^n + +Input latch +----------- + +Only `Basic PCAL chips`_ and +`PCAL chips with extended interrupt and output configuration functions`_ +have this function. When the latch is enabled, the interrupt is not cleared +until the input port is read. When the latch is disabled, the interrupt +is cleared even if the input register is not read, if the input pin returns +to the logic value it had before generating the interrupt. Defaults to latch +disabled. + +Currently the driver enables the latch for each line with interrupt +enabled. + + 1. base offset 0x40, bank 2, bank offsets of 2^n + - pcal6408 + - pcal6416 + - pcal9535 + - pcal9554b + - pcal9555a + - pcal6524 + + 2. base offset 0x30, bank 2, closely packed banks + - pcal6534 + +Pull-up and pull-down +--------------------- + +`Basic PCAL chips`_ and +`PCAL chips with extended interrupt and output configuration functions`_ +use the same mechanism: their pull_en register enables the pull-up or pull-down +function, and their pull_sel register chooses the direction. They all use one +bit per line. + + 0: pull-down, 1: pull-up + +Layouts: + + 1. base offset 0x40, bank 3 (en) and 4 (sel), bank offsets of 2^n + - pcal6408 + - pcal6416 + - pcal9535 + - pcal9554b + - pcal9555a + - pcal6524 + + 2. base offset 0x30, bank 3 (en) and 4 (sel), closely packed banks + - pcal6534 + +`PCA957X chips with a completely different register layout`_ have a pull_sel +register with one bit per line, and a global pull_en bit in their config +register. + +Layout: + + 1. bank 2 (config), bank 3 (sel), bank offsets of 2^n + - pca9574 + - pca9575 + +`XRA1202`_ chips can only pull-up. They have a pullup_en register. + +Layout: + + 1. bank 4, bank offsets of 2^n + - xra1202 + +Push-pull and open-drain +------------------------ + +`Chips with additional int_mask and out_conf registers`_ have this function, +but only for select IO ports. Register has 1 bit per 2 lines. In pca9698, +only port0 and port1 have this function. + + 0: open-drain, 1: push-pull + +Layout: + + 1. base offset 5*bankoffset + - pca9698 + +`Basic PCAL chips`_ have 1 bit per port in one single out_conf register. +Only whole ports can be configured. + + 0: push-pull, 1: open-drain + +Layout: + + 1. base offset 0x4F + - pcal6408 + - pcal6416 + - pcal9535 + - pcal9554b + - pcal9555a + +`PCAL chips with extended interrupt and output configuration functions`_ +can set this for each line individually. They have the same per-port out_conf +register as `Basic PCAL chips`_, but they also have an indiv_out_conf register +with one bit per line, which inverts the effect of the port-wise setting. + + 0: push-pull, 1: open-drain + +Layouts: + + 1. base offset 0x40 + 7*bankoffset (out_conf), + base offset 0x60, bank 4 (indiv_out_conf) with bank offset of 2^n + + - pcal6524 + + 2. base offset 0x30 + 7*banksize (out_conf), + base offset 0x54, bank 4 (indiv_out_conf), closely packed banks + + - pcal6534 + +This function is currently not supported by the driver. + +Output drive strength +--------------------- + +Only PCAL chips have this function. 2 bits per line. + +==== ============== +bits drive strength +==== ============== + 00 0.25x + 01 0.50x + 10 0.75x + 11 1.00x +==== ============== + + 1. base offset 0x40, bank 0 and 1, bank offsets of 2^n + - pcal6408 + - pcal6416 + - pcal9535 + - pcal9554b + - pcal9555a + - pcal6524 + + 2. base offset 0x30, bank 0 and 1, closely packed banks + - pcal6534 + +Currently not supported by the driver. + +Datasheets +========== + +- MAX7310: https://datasheets.maximintegrated.com/en/ds/MAX7310.pdf +- MAX7312: https://datasheets.maximintegrated.com/en/ds/MAX7312.pdf +- MAX7313: https://datasheets.maximintegrated.com/en/ds/MAX7313.pdf +- MAX7315: https://datasheets.maximintegrated.com/en/ds/MAX7315.pdf +- MAX7318: https://datasheets.maximintegrated.com/en/ds/MAX7318.pdf +- PCA6107: https://pdf1.alldatasheet.com/datasheet-pdf/view/161780/TI/PCA6107.html +- PCA6408A: https://www.nxp.com/docs/en/data-sheet/PCA6408A.pdf +- PCA6416A: https://www.nxp.com/docs/en/data-sheet/PCA6416A.pdf +- PCA9505: https://www.nxp.com/docs/en/data-sheet/PCA9505_9506.pdf +- PCA9505: https://www.nxp.com/docs/en/data-sheet/PCA9505_9506.pdf +- PCA9534: https://www.nxp.com/docs/en/data-sheet/PCA9534.pdf +- PCA9535: https://www.nxp.com/docs/en/data-sheet/PCA9535_PCA9535C.pdf +- PCA9536: https://www.nxp.com/docs/en/data-sheet/PCA9536.pdf +- PCA9537: https://www.nxp.com/docs/en/data-sheet/PCA9537.pdf +- PCA9538: https://www.nxp.com/docs/en/data-sheet/PCA9538.pdf +- PCA9539: https://www.nxp.com/docs/en/data-sheet/PCA9539_PCA9539R.pdf +- PCA9554: https://www.nxp.com/docs/en/data-sheet/PCA9554_9554A.pdf +- PCA9555: https://www.nxp.com/docs/en/data-sheet/PCA9555.pdf +- PCA9556: https://www.nxp.com/docs/en/data-sheet/PCA9556.pdf +- PCA9557: https://www.nxp.com/docs/en/data-sheet/PCA9557.pdf +- PCA9574: https://www.nxp.com/docs/en/data-sheet/PCA9574.pdf +- PCA9575: https://www.nxp.com/docs/en/data-sheet/PCA9575.pdf +- PCA9698: https://www.nxp.com/docs/en/data-sheet/PCA9698.pdf +- PCAL6408A: https://www.nxp.com/docs/en/data-sheet/PCAL6408A.pdf +- PCAL6416A: https://www.nxp.com/docs/en/data-sheet/PCAL6416A.pdf +- PCAL6524: https://www.nxp.com/docs/en/data-sheet/PCAL6524.pdf +- PCAL6534: https://www.nxp.com/docs/en/data-sheet/PCAL6534.pdf +- PCAL9535A: https://www.nxp.com/docs/en/data-sheet/PCAL9535A.pdf +- PCAL9554B: https://www.nxp.com/docs/en/data-sheet/PCAL9554B_PCAL9554C.pdf +- PCAL9555A: https://www.nxp.com/docs/en/data-sheet/PCAL9555A.pdf +- TCA6408A: https://www.ti.com/lit/gpn/tca6408a +- TCA6416: https://www.ti.com/lit/gpn/tca6416 +- TCA6424: https://www.ti.com/lit/gpn/tca6424 +- TCA9539: https://www.ti.com/lit/gpn/tca9539 +- TCA9554: https://www.ti.com/lit/gpn/tca9554 +- XRA1202: https://assets.maxlinear.com/web/documents/xra1202_1202p_101_042213.pdf diff --git a/Documentation/driver-api/hw-recoverable-errors.rst b/Documentation/driver-api/hw-recoverable-errors.rst new file mode 100644 index 00000000000000..fc526c3454bd76 --- /dev/null +++ b/Documentation/driver-api/hw-recoverable-errors.rst @@ -0,0 +1,60 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================================================= +Recoverable Hardware Error Tracking in vmcoreinfo +================================================= + +Overview +-------- + +This feature provides a generic infrastructure within the Linux kernel to track +and log recoverable hardware errors. These are hardware recoverable errors +visible that might not cause immediate panics but may influence health, mainly +because new code path will be executed in the kernel. + +By recording counts and timestamps of recoverable errors into the vmcoreinfo +crash dump notes, this infrastructure aids post-mortem crash analysis tools in +correlating hardware events with kernel failures. This enables faster triage +and better understanding of root causes, especially in large-scale cloud +environments where hardware issues are common. + +Benefits +-------- + +- Facilitates correlation of hardware recoverable errors with kernel panics or + unusual code paths that lead to system crashes. +- Provides operators and cloud providers quick insights, improving reliability + and reducing troubleshooting time. +- Complements existing full hardware diagnostics without replacing them. + +Data Exposure and Consumption +----------------------------- + +- The tracked error data consists of per-error-type counts and timestamps of + last occurrence. +- This data is stored in the `hwerror_data` array, categorized by error source + types like CPU, memory, PCI, CXL, and others. +- It is exposed via vmcoreinfo crash dump notes and can be read using tools + like `crash`, `drgn`, or other kernel crash analysis utilities. +- There is no other way to read these data other than from crash dumps. +- These errors are divided by area, which includes CPU, Memory, PCI, CXL and + others. + +Typical usage example (in drgn REPL): + +.. code-block:: python + + >>> prog['hwerror_data'] + (struct hwerror_info[HWERR_RECOV_MAX]){ + { + .count = (int)844, + .timestamp = (time64_t)1752852018, + }, + ... + } + +Enabling +-------- + +- This feature is enabled when CONFIG_VMCORE_INFO is set. + diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst index 3e2a270bd82826..1833e6a0687e40 100644 --- a/Documentation/driver-api/index.rst +++ b/Documentation/driver-api/index.rst @@ -93,9 +93,11 @@ Subsystem-specific APIs frame-buffer aperture generic-counter + generic_pt gpio/index hsi hte/index + hw-recoverable-errors i2c iio/index infiniband diff --git a/Documentation/driver-api/media/v4l2-core.rst b/Documentation/driver-api/media/v4l2-core.rst index ad987c34ad2a84..a5f5102c64cca5 100644 --- a/Documentation/driver-api/media/v4l2-core.rst +++ b/Documentation/driver-api/media/v4l2-core.rst @@ -27,3 +27,4 @@ Video4Linux devices v4l2-common v4l2-tveeprom v4l2-jpeg + v4l2-isp diff --git a/Documentation/driver-api/media/v4l2-isp.rst b/Documentation/driver-api/media/v4l2-isp.rst new file mode 100644 index 00000000000000..618ae614ff7942 --- /dev/null +++ b/Documentation/driver-api/media/v4l2-isp.rst @@ -0,0 +1,49 @@ +.. SPDX-License-Identifier: GPL-2.0 + +V4L2 generic ISP parameters and statistics support +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Design rationale +================ + +ISP configuration parameters and statistics are processed and collected by +drivers and exchanged with userspace through data types that usually +reflect the ISP peripheral registers layout. + +Each ISP driver defines its own metadata output format for parameters and +a metadata capture format for statistics. The buffer layout is realized by a +set of C structures that reflects the registers layout. The number and types +of C structures is fixed by the format definition and becomes part of the Linux +kernel uAPI/uABI interface. + +Because of the hard requirement of backward compatibility when extending the +user API/ABI interface, modifying an ISP driver capture or output metadata +format after it has been accepted by mainline is very hard if not impossible. + +It generally happens, in fact, that after the first accepted revision of an ISP +driver the buffers layout need to be modified, either to support new hardware +blocks, to fix bugs or to support different revisions of the hardware. + +Each of these situations would require defining a new metadata format, making it +really hard to maintain and extend drivers and requiring userspace to use +the correct format depending on the kernel revision in use. + +V4L2 ISP configuration parameters +================================= + +For these reasons, Video4Linux2 defines generic types for ISP configuration +parameters and statistics. Drivers are still expected to define their own +formats for their metadata output and capture nodes, but the buffers layout can +be defined using the extensible and versioned types defined by +include/uapi/linux/media/v4l2-isp.h. + +Drivers are expected to provide the definitions of their supported ISP blocks +and the expected maximum size of a buffer. + +For driver developers a set of helper functions to assist them with validation +of the buffer received from userspace is available in +drivers/media/v4l2-core/v4l2-isp.c + +V4L2 ISP support driver documentation +===================================== +.. kernel-doc:: include/media/v4l2-isp.h diff --git a/Documentation/driver-api/mtdnand.rst b/Documentation/driver-api/mtdnand.rst index ce77e024c4f1c9..adf03983f1ba8b 100644 --- a/Documentation/driver-api/mtdnand.rst +++ b/Documentation/driver-api/mtdnand.rst @@ -996,11 +996,11 @@ The following people have contributed to the NAND driver: 2. David Woodhouse\ dwmw2@infradead.org -3. Thomas Gleixner\ tglx@linutronix.de +3. Thomas Gleixner\ tglx@kernel.org A lot of users have provided bugfixes, improvements and helping hands for testing. Thanks a lot. The following people have contributed to this document: -1. Thomas Gleixner\ tglx@linutronix.de +1. Thomas Gleixner\ tglx@kernel.org diff --git a/Documentation/driver-api/nvdimm/btt.rst b/Documentation/driver-api/nvdimm/btt.rst index 107395c042ae07..2d8269f834bd60 100644 --- a/Documentation/driver-api/nvdimm/btt.rst +++ b/Documentation/driver-api/nvdimm/btt.rst @@ -83,7 +83,7 @@ flags, and the remaining form the internal block number. ======== ============================================================= Bit Description ======== ============================================================= -31 - 30 Error and Zero flags - Used in the following way:: +31 - 30 Error and Zero flags - Used in the following way: == == ==================================================== 31 30 Description diff --git a/Documentation/driver-api/parport-lowlevel.rst b/Documentation/driver-api/parport-lowlevel.rst index 0633d70ffda7fa..a907e279f509b4 100644 --- a/Documentation/driver-api/parport-lowlevel.rst +++ b/Documentation/driver-api/parport-lowlevel.rst @@ -7,6 +7,7 @@ PARPORT interface documentation Described here are the following functions: Global functions:: + parport_register_driver parport_unregister_driver parport_enumerate @@ -34,6 +35,7 @@ Global functions:: Port functions (can be overridden by low-level drivers): SPP:: + port->ops->read_data port->ops->write_data port->ops->read_status @@ -46,17 +48,20 @@ Port functions (can be overridden by low-level drivers): port->ops->data_reverse EPP:: + port->ops->epp_write_data port->ops->epp_read_data port->ops->epp_write_addr port->ops->epp_read_addr ECP:: + port->ops->ecp_write_data port->ops->ecp_read_data port->ops->ecp_write_addr Other:: + port->ops->nibble_read_data port->ops->byte_read_data port->ops->compat_write_data diff --git a/Documentation/driver-api/pci/index.rst b/Documentation/driver-api/pci/index.rst index a38e475cdbe3bd..9e1b801d0f7476 100644 --- a/Documentation/driver-api/pci/index.rst +++ b/Documentation/driver-api/pci/index.rst @@ -10,6 +10,7 @@ The Linux PCI driver implementer's API guide pci p2pdma + tsm .. only:: subproject and html diff --git a/Documentation/driver-api/pci/p2pdma.rst b/Documentation/driver-api/pci/p2pdma.rst index d0b241628cf13d..280673b50350b2 100644 --- a/Documentation/driver-api/pci/p2pdma.rst +++ b/Documentation/driver-api/pci/p2pdma.rst @@ -9,22 +9,48 @@ between two devices on the bus. This type of transaction is henceforth called Peer-to-Peer (or P2P). However, there are a number of issues that make P2P transactions tricky to do in a perfectly safe way. -One of the biggest issues is that PCI doesn't require forwarding -transactions between hierarchy domains, and in PCIe, each Root Port -defines a separate hierarchy domain. To make things worse, there is no -simple way to determine if a given Root Complex supports this or not. -(See PCIe r4.0, sec 1.3.1). Therefore, as of this writing, the kernel -only supports doing P2P when the endpoints involved are all behind the -same PCI bridge, as such devices are all in the same PCI hierarchy -domain, and the spec guarantees that all transactions within the -hierarchy will be routable, but it does not require routing -between hierarchies. - -The second issue is that to make use of existing interfaces in Linux, -memory that is used for P2P transactions needs to be backed by struct -pages. However, PCI BARs are not typically cache coherent so there are -a few corner case gotchas with these pages so developers need to -be careful about what they do with them. +For PCIe the routing of Transaction Layer Packets (TLPs) is well-defined up +until they reach a host bridge or root port. If the path includes PCIe switches +then based on the ACS settings the transaction can route entirely within +the PCIe hierarchy and never reach the root port. The kernel will evaluate +the PCIe topology and always permit P2P in these well-defined cases. + +However, if the P2P transaction reaches the host bridge then it might have to +hairpin back out the same root port, be routed inside the CPU SOC to another +PCIe root port, or routed internally to the SOC. + +The PCIe specification doesn't define the forwarding of transactions between +hierarchy domains and kernel defaults to blocking such routing. There is an +allow list to allow detecting known-good HW, in which case P2P between any +two PCIe devices will be permitted. + +Since P2P inherently is doing transactions between two devices it requires two +drivers to be co-operating inside the kernel. The providing driver has to convey +its MMIO to the consuming driver. To meet the driver model lifecycle rules the +MMIO must have all DMA mapping removed, all CPU accesses prevented, all page +table mappings undone before the providing driver completes remove(). + +This requires the providing and consuming driver to actively work together to +guarantee that the consuming driver has stopped using the MMIO during a removal +cycle. This is done by either a synchronous invalidation shutdown or waiting +for all usage refcounts to reach zero. + +At the lowest level the P2P subsystem offers a naked struct p2p_provider that +delegates lifecycle management to the providing driver. It is expected that +drivers using this option will wrap their MMIO memory in DMABUF and use DMABUF +to provide an invalidation shutdown. These MMIO addresess have no struct page, and +if used with mmap() must create special PTEs. As such there are very few +kernel uAPIs that can accept pointers to them; in particular they cannot be used +with read()/write(), including O_DIRECT. + +Building on this, the subsystem offers a layer to wrap the MMIO in a ZONE_DEVICE +pgmap of MEMORY_DEVICE_PCI_P2PDMA to create struct pages. The lifecycle of +pgmap ensures that when the pgmap is destroyed all other drivers have stopped +using the MMIO. This option works with O_DIRECT flows, in some cases, if the +underlying subsystem supports handling MEMORY_DEVICE_PCI_P2PDMA through +FOLL_PCI_P2PDMA. The use of FOLL_LONGTERM is prevented. As this relies on pgmap +it also relies on architecture support along with alignment and minimum size +limitations. Driver Writer's Guide @@ -114,14 +140,39 @@ allocating scatter-gather lists with P2P memory. Struct Page Caveats ------------------- -Driver writers should be very careful about not passing these special -struct pages to code that isn't prepared for it. At this time, the kernel -interfaces do not have any checks for ensuring this. This obviously -precludes passing these pages to userspace. +While the MEMORY_DEVICE_PCI_P2PDMA pages can be installed in VMAs, +pin_user_pages() and related will not return them unless FOLL_PCI_P2PDMA is set. -P2P memory is also technically IO memory but should never have any side -effects behind it. Thus, the order of loads and stores should not be important -and ioreadX(), iowriteX() and friends should not be necessary. +The MEMORY_DEVICE_PCI_P2PDMA pages require care to support in the kernel. The +KVA is still MMIO and must still be accessed through the normal +readX()/writeX()/etc helpers. Direct CPU access (e.g. memcpy) is forbidden, just +like any other MMIO mapping. While this will actually work on some +architectures, others will experience corruption or just crash in the kernel. +Supporting FOLL_PCI_P2PDMA in a subsystem requires scrubbing it to ensure no CPU +access happens. + + +Usage With DMABUF +================= + +DMABUF provides an alternative to the above struct page-based +client/provider/orchestrator system and should be used when struct page +doesn't exist. In this mode the exporting driver will wrap +some of its MMIO in a DMABUF and give the DMABUF FD to userspace. + +Userspace can then pass the FD to an importing driver which will ask the +exporting driver to map it to the importer. + +In this case the initiator and target pci_devices are known and the P2P subsystem +is used to determine the mapping type. The phys_addr_t-based DMA API is used to +establish the dma_addr_t. + +Lifecycle is controlled by DMABUF move_notify(). When the exporting driver wants +to remove() it must deliver an invalidation shutdown to all DMABUF importing +drivers through move_notify() and synchronously DMA unmap all the MMIO. + +No importing driver can continue to have a DMA map to the MMIO after the +exporting driver has destroyed its p2p_provider. P2P DMA Support Library diff --git a/Documentation/driver-api/pci/pci.rst b/Documentation/driver-api/pci/pci.rst index 59d86e8271986a..99a1bbaaec5d07 100644 --- a/Documentation/driver-api/pci/pci.rst +++ b/Documentation/driver-api/pci/pci.rst @@ -37,6 +37,9 @@ PCI Support Library .. kernel-doc:: drivers/pci/slot.c :export: +.. kernel-doc:: drivers/pci/rebar.c + :export: + .. kernel-doc:: drivers/pci/rom.c :export: diff --git a/Documentation/driver-api/pci/tsm.rst b/Documentation/driver-api/pci/tsm.rst new file mode 100644 index 00000000000000..232b92bec93f0d --- /dev/null +++ b/Documentation/driver-api/pci/tsm.rst @@ -0,0 +1,21 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: + +======================================================== +PCI Trusted Execution Environment Security Manager (TSM) +======================================================== + +Subsystem Interfaces +==================== + +.. kernel-doc:: include/linux/pci-ide.h + :internal: + +.. kernel-doc:: drivers/pci/ide.c + :export: + +.. kernel-doc:: include/linux/pci-tsm.h + :internal: + +.. kernel-doc:: drivers/pci/tsm.c + :export: diff --git a/Documentation/driver-api/pldmfw/index.rst b/Documentation/driver-api/pldmfw/index.rst index fd871b83f34f3a..e59beca374c1fa 100644 --- a/Documentation/driver-api/pldmfw/index.rst +++ b/Documentation/driver-api/pldmfw/index.rst @@ -14,7 +14,6 @@ the PLDM for Firmware Update standard file-format driver-ops -================================== Overview of the ``pldmfw`` library ================================== diff --git a/Documentation/driver-api/reset.rst b/Documentation/driver-api/reset.rst index 84e03d7039ccba..f773100daaa415 100644 --- a/Documentation/driver-api/reset.rst +++ b/Documentation/driver-api/reset.rst @@ -218,4 +218,3 @@ devm_reset_controller_register(). reset_controller_register reset_controller_unregister devm_reset_controller_register - reset_controller_add_lookup diff --git a/Documentation/driver-api/thermal/intel_dptf.rst b/Documentation/driver-api/thermal/intel_dptf.rst index c51ac793dc06e2..916bf0f36a0366 100644 --- a/Documentation/driver-api/thermal/intel_dptf.rst +++ b/Documentation/driver-api/thermal/intel_dptf.rst @@ -409,3 +409,26 @@ based on the processor generation. Limit 1 from being exhausted. 4 – Unknown: Can't classify. + + On processors starting from Panther Lake additional hints are provided. + The hardware analyzes workload residencies over an extended period to + determine whether the workload classification tends toward idle/battery + life states or sustained/performance states. Based on this long-term + analysis, it classifies: + + Power Classification: If the workload exhibits more idle or battery life + residencies, it is classified as "power". + + Performance Classification: If the workload exhibits more sustained or + performance residencies, it is classified as "performance". + + This approach enables applications to ignore short-term workload + fluctuations and instead respond to longer-term power vs. performance + trends. + + Residency thresholds for this classification are CPU generation-specific. + Classification is reported via bit 4 of the workload_type_index: + + Bit 4 = 1: Power classification + + Bit 4 = 0: Performance classification diff --git a/Documentation/driver-api/usb/writing_musb_glue_layer.rst b/Documentation/driver-api/usb/writing_musb_glue_layer.rst index 0bb96ecdf527b4..b748b9fb1965af 100644 --- a/Documentation/driver-api/usb/writing_musb_glue_layer.rst +++ b/Documentation/driver-api/usb/writing_musb_glue_layer.rst @@ -709,7 +709,7 @@ Resources USB Home Page: https://www.usb.org -linux-usb Mailing List Archives: https://marc.info/?l=linux-usb +linux-usb Mailing List Archives: https://lore.kernel.org/linux-usb USB On-the-Go Basics: https://www.maximintegrated.com/app-notes/index.mvp/id/1822 diff --git a/Documentation/driver-api/wmi.rst b/Documentation/driver-api/wmi.rst index 4e8dbdb1fc6780..db835b43c9379d 100644 --- a/Documentation/driver-api/wmi.rst +++ b/Documentation/driver-api/wmi.rst @@ -16,5 +16,5 @@ which will be bound to compatible WMI devices by the driver core. .. kernel-doc:: include/linux/wmi.h :internal: -.. kernel-doc:: drivers/platform/x86/wmi.c +.. kernel-doc:: drivers/platform/wmi/core.c :export: diff --git a/Documentation/features/core/generic-idle-thread/arch-support.txt b/Documentation/features/core/generic-idle-thread/arch-support.txt index 0735cb5367b4b1..425442e31fa25b 100644 --- a/Documentation/features/core/generic-idle-thread/arch-support.txt +++ b/Documentation/features/core/generic-idle-thread/arch-support.txt @@ -24,7 +24,7 @@ | s390: | ok | | sh: | ok | | sparc: | ok | - | um: | TODO | + | um: | ok | | x86: | ok | | xtensa: | ok | ----------------------- diff --git a/Documentation/features/list-arch.sh b/Documentation/features/list-arch.sh deleted file mode 100755 index ac8ff7f6f859e1..00000000000000 --- a/Documentation/features/list-arch.sh +++ /dev/null @@ -1,11 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Small script that visualizes the kernel feature support status -# of an architecture. -# -# (If no arguments are given then it will print the host architecture's status.) -# - -ARCH=${1:-$(uname -m | sed 's/x86_64/x86/' | sed 's/i386/x86/' | sed 's/s390x/s390/')} - -$(dirname $0)/../../scripts/get_feat.pl list --arch $ARCH diff --git a/Documentation/features/scripts/features-refresh.sh b/Documentation/features/scripts/features-refresh.sh deleted file mode 100755 index c2288124e94ae3..00000000000000 --- a/Documentation/features/scripts/features-refresh.sh +++ /dev/null @@ -1,98 +0,0 @@ -# -# Small script that refreshes the kernel feature support status in place. -# - -for F_FILE in Documentation/features/*/*/arch-support.txt; do - F=$(grep "^# Kconfig:" "$F_FILE" | cut -c26-) - - # - # Each feature F is identified by a pair (O, K), where 'O' can - # be either the empty string (for 'nop') or "not" (the logical - # negation operator '!'); other operators are not supported. - # - O="" - K=$F - if [[ "$F" == !* ]]; then - O="not" - K=$(echo $F | sed -e 's/^!//g') - fi - - # - # F := (O, K) is 'valid' iff there is a Kconfig file (for some - # arch) which contains K. - # - # Notice that this definition entails an 'asymmetry' between - # the case 'O = ""' and the case 'O = "not"'. E.g., F may be - # _invalid_ if: - # - # [case 'O = ""'] - # 1) no arch provides support for F, - # 2) K does not exist (e.g., it was renamed/mis-typed); - # - # [case 'O = "not"'] - # 3) all archs provide support for F, - # 4) as in (2). - # - # The rationale for adopting this definition (and, thus, for - # keeping the asymmetry) is: - # - # We want to be able to 'detect' (2) (or (4)). - # - # (1) and (3) may further warn the developers about the fact - # that K can be removed. - # - F_VALID="false" - for ARCH_DIR in arch/*/; do - K_FILES=$(find $ARCH_DIR -name "Kconfig*") - K_GREP=$(grep "$K" $K_FILES) - if [ ! -z "$K_GREP" ]; then - F_VALID="true" - break - fi - done - if [ "$F_VALID" = "false" ]; then - printf "WARNING: '%s' is not a valid Kconfig\n" "$F" - fi - - T_FILE="$F_FILE.tmp" - grep "^#" $F_FILE > $T_FILE - echo " -----------------------" >> $T_FILE - echo " | arch |status|" >> $T_FILE - echo " -----------------------" >> $T_FILE - for ARCH_DIR in arch/*/; do - ARCH=$(echo $ARCH_DIR | sed -e 's/^arch//g' | sed -e 's/\///g') - K_FILES=$(find $ARCH_DIR -name "Kconfig*") - K_GREP=$(grep "$K" $K_FILES) - # - # Arch support status values for (O, K) are updated according - # to the following rules. - # - # - ("", K) is 'supported by a given arch', if there is a - # Kconfig file for that arch which contains K; - # - # - ("not", K) is 'supported by a given arch', if there is - # no Kconfig file for that arch which contains K; - # - # - otherwise: preserve the previous status value (if any), - # default to 'not yet supported'. - # - # Notice that, according these rules, invalid features may be - # updated/modified. - # - if [ "$O" = "" ] && [ ! -z "$K_GREP" ]; then - printf " |%12s: | ok |\n" "$ARCH" >> $T_FILE - elif [ "$O" = "not" ] && [ -z "$K_GREP" ]; then - printf " |%12s: | ok |\n" "$ARCH" >> $T_FILE - else - S=$(grep -v "^#" "$F_FILE" | grep " $ARCH:") - if [ ! -z "$S" ]; then - echo "$S" >> $T_FILE - else - printf " |%12s: | TODO |\n" "$ARCH" \ - >> $T_FILE - fi - fi - done - echo " -----------------------" >> $T_FILE - mv $T_FILE $F_FILE -done diff --git a/Documentation/filesystems/ext4/inodes.rst b/Documentation/filesystems/ext4/inodes.rst index cfc6c16599312a..55cd5c380e923d 100644 --- a/Documentation/filesystems/ext4/inodes.rst +++ b/Documentation/filesystems/ext4/inodes.rst @@ -297,6 +297,8 @@ The ``i_flags`` field is a combination of these values: - Inode has inline data (EXT4_INLINE_DATA_FL). * - 0x20000000 - Create children with the same project ID (EXT4_PROJINHERIT_FL). + * - 0x40000000 + - Use case-insensitive lookups for directory contents (EXT4_CASEFOLD_FL). * - 0x80000000 - Reserved for ext4 library (EXT4_RESERVED_FL). * - diff --git a/Documentation/filesystems/ext4/super.rst b/Documentation/filesystems/ext4/super.rst index 1b240661bfa306..9a59cded9bd772 100644 --- a/Documentation/filesystems/ext4/super.rst +++ b/Documentation/filesystems/ext4/super.rst @@ -671,7 +671,9 @@ following: * - 0x8000 - Data in inode (INCOMPAT_INLINE_DATA). * - 0x10000 - - Encrypted inodes are present on the filesystem. (INCOMPAT_ENCRYPT). + - Encrypted inodes can be present. (INCOMPAT_ENCRYPT). + * - 0x20000 + - Directories can be marked case-insensitive. (INCOMPAT_CASEFOLD). .. _super_rocompat: diff --git a/Documentation/filesystems/f2fs.rst b/Documentation/filesystems/f2fs.rst index a8d02fe5be8399..cb90d1ae82d012 100644 --- a/Documentation/filesystems/f2fs.rst +++ b/Documentation/filesystems/f2fs.rst @@ -188,34 +188,36 @@ fault_type=%d Support configuring fault injection type, should be enabled with fault_injection option, fault type value is shown below, it supports single or combined type. - =========================== ========== - Type_Name Type_Value - =========================== ========== - FAULT_KMALLOC 0x00000001 - FAULT_KVMALLOC 0x00000002 - FAULT_PAGE_ALLOC 0x00000004 - FAULT_PAGE_GET 0x00000008 - FAULT_ALLOC_BIO 0x00000010 (obsolete) - FAULT_ALLOC_NID 0x00000020 - FAULT_ORPHAN 0x00000040 - FAULT_BLOCK 0x00000080 - FAULT_DIR_DEPTH 0x00000100 - FAULT_EVICT_INODE 0x00000200 - FAULT_TRUNCATE 0x00000400 - FAULT_READ_IO 0x00000800 - FAULT_CHECKPOINT 0x00001000 - FAULT_DISCARD 0x00002000 - FAULT_WRITE_IO 0x00004000 - FAULT_SLAB_ALLOC 0x00008000 - FAULT_DQUOT_INIT 0x00010000 - FAULT_LOCK_OP 0x00020000 - FAULT_BLKADDR_VALIDITY 0x00040000 - FAULT_BLKADDR_CONSISTENCE 0x00080000 - FAULT_NO_SEGMENT 0x00100000 - FAULT_INCONSISTENT_FOOTER 0x00200000 - FAULT_TIMEOUT 0x00400000 (1000ms) - FAULT_VMALLOC 0x00800000 - =========================== ========== + .. code-block:: none + + =========================== ========== + Type_Name Type_Value + =========================== ========== + FAULT_KMALLOC 0x00000001 + FAULT_KVMALLOC 0x00000002 + FAULT_PAGE_ALLOC 0x00000004 + FAULT_PAGE_GET 0x00000008 + FAULT_ALLOC_BIO 0x00000010 (obsolete) + FAULT_ALLOC_NID 0x00000020 + FAULT_ORPHAN 0x00000040 + FAULT_BLOCK 0x00000080 + FAULT_DIR_DEPTH 0x00000100 + FAULT_EVICT_INODE 0x00000200 + FAULT_TRUNCATE 0x00000400 + FAULT_READ_IO 0x00000800 + FAULT_CHECKPOINT 0x00001000 + FAULT_DISCARD 0x00002000 + FAULT_WRITE_IO 0x00004000 + FAULT_SLAB_ALLOC 0x00008000 + FAULT_DQUOT_INIT 0x00010000 + FAULT_LOCK_OP 0x00020000 + FAULT_BLKADDR_VALIDITY 0x00040000 + FAULT_BLKADDR_CONSISTENCE 0x00080000 + FAULT_NO_SEGMENT 0x00100000 + FAULT_INCONSISTENT_FOOTER 0x00200000 + FAULT_TIMEOUT 0x00400000 (1000ms) + FAULT_VMALLOC 0x00800000 + =========================== ========== mode=%s Control block allocation mode which supports "adaptive" and "lfs". In "lfs" mode, there should be no random writes towards main area. @@ -296,14 +298,15 @@ nocheckpoint_merge Disable checkpoint merge feature. compress_algorithm=%s Control compress algorithm, currently f2fs supports "lzo", "lz4", "zstd" and "lzo-rle" algorithm. compress_algorithm=%s:%d Control compress algorithm and its compress level, now, only - "lz4" and "zstd" support compress level config. - - ========= =========== - algorithm level range - ========= =========== - lz4 3 - 16 - zstd 1 - 22 - ========= =========== + "lz4" and "zstd" support compress level config:: + + ========= =========== + algorithm level range + ========= =========== + lz4 3 - 16 + zstd 1 - 22 + ========= =========== + compress_log_size=%u Support configuring compress cluster size. The size will be 4KB * (1 << %u). The default and minimum sizes are 16KB. compress_extension=%s Support adding specified extension, so that f2fs can enable @@ -368,38 +371,42 @@ errors=%s Specify f2fs behavior on critical errors. This supports modes: the partition in read-only mode. By default it uses "continue" mode. - ====================== =============== =============== ======== - mode continue remount-ro panic - ====================== =============== =============== ======== - access ops normal normal N/A - syscall errors -EIO -EROFS N/A - mount option rw ro N/A - pending dir write keep keep N/A - pending non-dir write drop keep N/A - pending node write drop keep N/A - pending meta write keep keep N/A - ====================== =============== =============== ======== + .. code-block:: none + + ====================== =============== =============== ======== + mode continue remount-ro panic + ====================== =============== =============== ======== + access ops normal normal N/A + syscall errors -EIO -EROFS N/A + mount option rw ro N/A + pending dir write keep keep N/A + pending non-dir write drop keep N/A + pending node write drop keep N/A + pending meta write keep keep N/A + ====================== =============== =============== ======== nat_bits Enable nat_bits feature to enhance full/empty nat blocks access, by default it's disabled. lookup_mode=%s Control the directory lookup behavior for casefolded directories. This option has no effect on directories that do not have the casefold feature enabled. - ================== ======================================== - Value Description - ================== ======================================== - perf (Default) Enforces a hash-only lookup. - The linear search fallback is always - disabled, ignoring the on-disk flag. - compat Enables the linear search fallback for - compatibility with directory entries - created by older kernel that used a - different case-folding algorithm. - This mode ignores the on-disk flag. - auto F2FS determines the mode based on the - on-disk `SB_ENC_NO_COMPAT_FALLBACK_FL` - flag. - ================== ======================================== + .. code-block:: none + + ================== ======================================== + Value Description + ================== ======================================== + perf (Default) Enforces a hash-only lookup. + The linear search fallback is always + disabled, ignoring the on-disk flag. + compat Enables the linear search fallback for + compatibility with directory entries + created by older kernel that used a + different case-folding algorithm. + This mode ignores the on-disk flag. + auto F2FS determines the mode based on the + on-disk `SB_ENC_NO_COMPAT_FALLBACK_FL` + flag. + ================== ======================================== ======================== ============================================================ Debugfs Entries diff --git a/Documentation/filesystems/fscrypt.rst b/Documentation/filesystems/fscrypt.rst index 696a5844bfa3bd..70af896822e1e8 100644 --- a/Documentation/filesystems/fscrypt.rst +++ b/Documentation/filesystems/fscrypt.rst @@ -450,9 +450,7 @@ API, but the filenames mode still does. - CONFIG_CRYPTO_HCTR2 - Recommended: - arm64: CONFIG_CRYPTO_AES_ARM64_CE_BLK - - arm64: CONFIG_CRYPTO_POLYVAL_ARM64_CE - x86: CONFIG_CRYPTO_AES_NI_INTEL - - x86: CONFIG_CRYPTO_POLYVAL_CLMUL_NI - Adiantum - Mandatory: diff --git a/Documentation/filesystems/gfs2-glocks.rst b/Documentation/filesystems/gfs2-glocks.rst deleted file mode 100644 index ce5ff08cbd593d..00000000000000 --- a/Documentation/filesystems/gfs2-glocks.rst +++ /dev/null @@ -1,249 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -============================ -Glock internal locking rules -============================ - -This documents the basic principles of the glock state machine -internals. Each glock (struct gfs2_glock in fs/gfs2/incore.h) -has two main (internal) locks: - - 1. A spinlock (gl_lockref.lock) which protects the internal state such - as gl_state, gl_target and the list of holders (gl_holders) - 2. A non-blocking bit lock, GLF_LOCK, which is used to prevent other - threads from making calls to the DLM, etc. at the same time. If a - thread takes this lock, it must then call run_queue (usually via the - workqueue) when it releases it in order to ensure any pending tasks - are completed. - -The gl_holders list contains all the queued lock requests (not -just the holders) associated with the glock. If there are any -held locks, then they will be contiguous entries at the head -of the list. Locks are granted in strictly the order that they -are queued. - -There are three lock states that users of the glock layer can request, -namely shared (SH), deferred (DF) and exclusive (EX). Those translate -to the following DLM lock modes: - -========== ====== ===================================================== -Glock mode DLM lock mode -========== ====== ===================================================== - UN IV/NL Unlocked (no DLM lock associated with glock) or NL - SH PR (Protected read) - DF CW (Concurrent write) - EX EX (Exclusive) -========== ====== ===================================================== - -Thus DF is basically a shared mode which is incompatible with the "normal" -shared lock mode, SH. In GFS2 the DF mode is used exclusively for direct I/O -operations. The glocks are basically a lock plus some routines which deal -with cache management. The following rules apply for the cache: - -========== ============== ========== ========== ============== -Glock mode Cache Metadata Cache data Dirty Data Dirty Metadata -========== ============== ========== ========== ============== - UN No No No No - DF Yes No No No - SH Yes Yes No No - EX Yes Yes Yes Yes -========== ============== ========== ========== ============== - -These rules are implemented using the various glock operations which -are defined for each type of glock. Not all types of glocks use -all the modes. Only inode glocks use the DF mode for example. - -Table of glock operations and per type constants: - -============== ============================================================= -Field Purpose -============== ============================================================= -go_sync Called before remote state change (e.g. to sync dirty data) -go_xmote_bh Called after remote state change (e.g. to refill cache) -go_inval Called if remote state change requires invalidating the cache -go_instantiate Called when a glock has been acquired -go_held Called every time a glock holder is acquired -go_dump Called to print content of object for debugfs file, or on - error to dump glock to the log. -go_callback Called if the DLM sends a callback to drop this lock -go_unlocked Called when a glock is unlocked (dlm_unlock()) -go_type The type of the glock, ``LM_TYPE_*`` -go_flags GLOF_ASPACE is set, if the glock has an address space - associated with it -============== ============================================================= - -The minimum hold time for each lock is the time after a remote lock -grant for which we ignore remote demote requests. This is in order to -prevent a situation where locks are being bounced around the cluster -from node to node with none of the nodes making any progress. This -tends to show up most with shared mmapped files which are being written -to by multiple nodes. By delaying the demotion in response to a -remote callback, that gives the userspace program time to make -some progress before the pages are unmapped. - -Eventually, we hope to make the glock "EX" mode locally shared such that any -local locking will be done with the i_mutex as required rather than via the -glock. - -Locking rules for glock operations: - -============== ====================== ============================= -Operation GLF_LOCK bit lock held gl_lockref.lock spinlock held -============== ====================== ============================= -go_sync Yes No -go_xmote_bh Yes No -go_inval Yes No -go_instantiate No No -go_held No No -go_dump Sometimes Yes -go_callback Sometimes (N/A) Yes -go_unlocked Yes No -============== ====================== ============================= - -.. Note:: - - Operations must not drop either the bit lock or the spinlock - if its held on entry. go_dump and do_demote_ok must never block. - Note that go_dump will only be called if the glock's state - indicates that it is caching up-to-date data. - -Glock locking order within GFS2: - - 1. i_rwsem (if required) - 2. Rename glock (for rename only) - 3. Inode glock(s) - (Parents before children, inodes at "same level" with same parent in - lock number order) - 4. Rgrp glock(s) (for (de)allocation operations) - 5. Transaction glock (via gfs2_trans_begin) for non-read operations - 6. i_rw_mutex (if required) - 7. Page lock (always last, very important!) - -There are two glocks per inode. One deals with access to the inode -itself (locking order as above), and the other, known as the iopen -glock is used in conjunction with the i_nlink field in the inode to -determine the lifetime of the inode in question. Locking of inodes -is on a per-inode basis. Locking of rgrps is on a per rgrp basis. -In general we prefer to lock local locks prior to cluster locks. - -Glock Statistics ----------------- - -The stats are divided into two sets: those relating to the -super block and those relating to an individual glock. The -super block stats are done on a per cpu basis in order to -try and reduce the overhead of gathering them. They are also -further divided by glock type. All timings are in nanoseconds. - -In the case of both the super block and glock statistics, -the same information is gathered in each case. The super -block timing statistics are used to provide default values for -the glock timing statistics, so that newly created glocks -should have, as far as possible, a sensible starting point. -The per-glock counters are initialised to zero when the -glock is created. The per-glock statistics are lost when -the glock is ejected from memory. - -The statistics are divided into three pairs of mean and -variance, plus two counters. The mean/variance pairs are -smoothed exponential estimates and the algorithm used is -one which will be very familiar to those used to calculation -of round trip times in network code. See "TCP/IP Illustrated, -Volume 1", W. Richard Stevens, sect 21.3, "Round-Trip Time Measurement", -p. 299 and onwards. Also, Volume 2, Sect. 25.10, p. 838 and onwards. -Unlike the TCP/IP Illustrated case, the mean and variance are -not scaled, but are in units of integer nanoseconds. - -The three pairs of mean/variance measure the following -things: - - 1. DLM lock time (non-blocking requests) - 2. DLM lock time (blocking requests) - 3. Inter-request time (again to the DLM) - -A non-blocking request is one which will complete right -away, whatever the state of the DLM lock in question. That -currently means any requests when (a) the current state of -the lock is exclusive, i.e. a lock demotion (b) the requested -state is either null or unlocked (again, a demotion) or (c) the -"try lock" flag is set. A blocking request covers all the other -lock requests. - -There are two counters. The first is there primarily to show -how many lock requests have been made, and thus how much data -has gone into the mean/variance calculations. The other counter -is counting queuing of holders at the top layer of the glock -code. Hopefully that number will be a lot larger than the number -of dlm lock requests issued. - -So why gather these statistics? There are several reasons -we'd like to get a better idea of these timings: - -1. To be able to better set the glock "min hold time" -2. To spot performance issues more easily -3. To improve the algorithm for selecting resource groups for - allocation (to base it on lock wait time, rather than blindly - using a "try lock") - -Due to the smoothing action of the updates, a step change in -some input quantity being sampled will only fully be taken -into account after 8 samples (or 4 for the variance) and this -needs to be carefully considered when interpreting the -results. - -Knowing both the time it takes a lock request to complete and -the average time between lock requests for a glock means we -can compute the total percentage of the time for which the -node is able to use a glock vs. time that the rest of the -cluster has its share. That will be very useful when setting -the lock min hold time. - -Great care has been taken to ensure that we -measure exactly the quantities that we want, as accurately -as possible. There are always inaccuracies in any -measuring system, but I hope this is as accurate as we -can reasonably make it. - -Per sb stats can be found here:: - - /sys/kernel/debug/gfs2//sbstats - -Per glock stats can be found here:: - - /sys/kernel/debug/gfs2//glstats - -Assuming that debugfs is mounted on /sys/kernel/debug and also -that is replaced with the name of the gfs2 filesystem -in question. - -The abbreviations used in the output as are follows: - -========= ================================================================ -srtt Smoothed round trip time for non blocking dlm requests -srttvar Variance estimate for srtt -srttb Smoothed round trip time for (potentially) blocking dlm requests -srttvarb Variance estimate for srttb -sirt Smoothed inter request time (for dlm requests) -sirtvar Variance estimate for sirt -dlm Number of dlm requests made (dcnt in glstats file) -queue Number of glock requests queued (qcnt in glstats file) -========= ================================================================ - -The sbstats file contains a set of these stats for each glock type (so 8 lines -for each type) and for each cpu (one column per cpu). The glstats file contains -a set of these stats for each glock in a similar format to the glocks file, but -using the format mean/variance for each of the timing stats. - -The gfs2_glock_lock_time tracepoint prints out the current values of the stats -for the glock in question, along with some addition information on each dlm -reply that is received: - -====== ======================================= -status The status of the dlm request -flags The dlm request flags -tdiff The time taken by this specific request -====== ======================================= - -(remaining fields as per above list) - - diff --git a/Documentation/filesystems/gfs2-uevents.rst b/Documentation/filesystems/gfs2-uevents.rst deleted file mode 100644 index f162a2c76c696c..00000000000000 --- a/Documentation/filesystems/gfs2-uevents.rst +++ /dev/null @@ -1,112 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -================ -uevents and GFS2 -================ - -During the lifetime of a GFS2 mount, a number of uevents are generated. -This document explains what the events are and what they are used -for (by gfs_controld in gfs2-utils). - -A list of GFS2 uevents -====================== - -1. ADD ------- - -The ADD event occurs at mount time. It will always be the first -uevent generated by the newly created filesystem. If the mount -is successful, an ONLINE uevent will follow. If it is not successful -then a REMOVE uevent will follow. - -The ADD uevent has two environment variables: SPECTATOR=[0|1] -and RDONLY=[0|1] that specify the spectator status (a read-only mount -with no journal assigned), and read-only (with journal assigned) status -of the filesystem respectively. - -2. ONLINE ---------- - -The ONLINE uevent is generated after a successful mount or remount. It -has the same environment variables as the ADD uevent. The ONLINE -uevent, along with the two environment variables for spectator and -RDONLY are a relatively recent addition (2.6.32-rc+) and will not -be generated by older kernels. - -3. CHANGE ---------- - -The CHANGE uevent is used in two places. One is when reporting the -successful mount of the filesystem by the first node (FIRSTMOUNT=Done). -This is used as a signal by gfs_controld that it is then ok for other -nodes in the cluster to mount the filesystem. - -The other CHANGE uevent is used to inform of the completion -of journal recovery for one of the filesystems journals. It has -two environment variables, JID= which specifies the journal id which -has just been recovered, and RECOVERY=[Done|Failed] to indicate the -success (or otherwise) of the operation. These uevents are generated -for every journal recovered, whether it is during the initial mount -process or as the result of gfs_controld requesting a specific journal -recovery via the /sys/fs/gfs2//lock_module/recovery file. - -Because the CHANGE uevent was used (in early versions of gfs_controld) -without checking the environment variables to discover the state, we -cannot add any more functions to it without running the risk of -someone using an older version of the user tools and breaking their -cluster. For this reason the ONLINE uevent was used when adding a new -uevent for a successful mount or remount. - -4. OFFLINE ----------- - -The OFFLINE uevent is only generated due to filesystem errors and is used -as part of the "withdraw" mechanism. Currently this doesn't give any -information about what the error is, which is something that needs to -be fixed. - -5. REMOVE ---------- - -The REMOVE uevent is generated at the end of an unsuccessful mount -or at the end of a umount of the filesystem. All REMOVE uevents will -have been preceded by at least an ADD uevent for the same filesystem, -and unlike the other uevents is generated automatically by the kernel's -kobject subsystem. - - -Information common to all GFS2 uevents (uevent environment variables) -===================================================================== - -1. LOCKTABLE= --------------- - -The LOCKTABLE is a string, as supplied on the mount command -line (locktable=) or via fstab. It is used as a filesystem label -as well as providing the information for a lock_dlm mount to be -able to join the cluster. - -2. LOCKPROTO= -------------- - -The LOCKPROTO is a string, and its value depends on what is set -on the mount command line, or via fstab. It will be either -lock_nolock or lock_dlm. In the future other lock managers -may be supported. - -3. JOURNALID= -------------- - -If a journal is in use by the filesystem (journals are not -assigned for spectator mounts) then this will give the -numeric journal id in all GFS2 uevents. - -4. UUID= --------- - -With recent versions of gfs2-utils, mkfs.gfs2 writes a UUID -into the filesystem superblock. If it exists, this will -be included in every uevent relating to the filesystem. - - - diff --git a/Documentation/filesystems/gfs2.rst b/Documentation/filesystems/gfs2.rst deleted file mode 100644 index 1bc48a13430c1c..00000000000000 --- a/Documentation/filesystems/gfs2.rst +++ /dev/null @@ -1,52 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -==================== -Global File System 2 -==================== - -GFS2 is a cluster file system. It allows a cluster of computers to -simultaneously use a block device that is shared between them (with FC, -iSCSI, NBD, etc). GFS2 reads and writes to the block device like a local -file system, but also uses a lock module to allow the computers coordinate -their I/O so file system consistency is maintained. One of the nifty -features of GFS2 is perfect consistency -- changes made to the file system -on one machine show up immediately on all other machines in the cluster. - -GFS2 uses interchangeable inter-node locking mechanisms, the currently -supported mechanisms are: - - lock_nolock - - allows GFS2 to be used as a local file system - - lock_dlm - - uses the distributed lock manager (dlm) for inter-node locking. - The dlm is found at linux/fs/dlm/ - -lock_dlm depends on user space cluster management systems found -at the URL above. - -To use GFS2 as a local file system, no external clustering systems are -needed, simply:: - - $ mkfs -t gfs2 -p lock_nolock -j 1 /dev/block_device - $ mount -t gfs2 /dev/block_device /dir - -The gfs2-utils package is required on all cluster nodes and, for lock_dlm, you -will also need the dlm and corosync user space utilities configured as per the -documentation. - -gfs2-utils can be found at https://pagure.io/gfs2-utils - -GFS2 is not on-disk compatible with previous versions of GFS, but it -is pretty close. - -The following man pages are available from gfs2-utils: - - ============ ============================================= - fsck.gfs2 to repair a filesystem - gfs2_grow to expand a filesystem online - gfs2_jadd to add journals to a filesystem online - tunegfs2 to manipulate, examine and tune a filesystem - gfs2_convert to convert a gfs filesystem to GFS2 in-place - mkfs.gfs2 to make a filesystem - ============ ============================================= diff --git a/Documentation/filesystems/gfs2/glocks.rst b/Documentation/filesystems/gfs2/glocks.rst new file mode 100644 index 00000000000000..ce5ff08cbd593d --- /dev/null +++ b/Documentation/filesystems/gfs2/glocks.rst @@ -0,0 +1,249 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================ +Glock internal locking rules +============================ + +This documents the basic principles of the glock state machine +internals. Each glock (struct gfs2_glock in fs/gfs2/incore.h) +has two main (internal) locks: + + 1. A spinlock (gl_lockref.lock) which protects the internal state such + as gl_state, gl_target and the list of holders (gl_holders) + 2. A non-blocking bit lock, GLF_LOCK, which is used to prevent other + threads from making calls to the DLM, etc. at the same time. If a + thread takes this lock, it must then call run_queue (usually via the + workqueue) when it releases it in order to ensure any pending tasks + are completed. + +The gl_holders list contains all the queued lock requests (not +just the holders) associated with the glock. If there are any +held locks, then they will be contiguous entries at the head +of the list. Locks are granted in strictly the order that they +are queued. + +There are three lock states that users of the glock layer can request, +namely shared (SH), deferred (DF) and exclusive (EX). Those translate +to the following DLM lock modes: + +========== ====== ===================================================== +Glock mode DLM lock mode +========== ====== ===================================================== + UN IV/NL Unlocked (no DLM lock associated with glock) or NL + SH PR (Protected read) + DF CW (Concurrent write) + EX EX (Exclusive) +========== ====== ===================================================== + +Thus DF is basically a shared mode which is incompatible with the "normal" +shared lock mode, SH. In GFS2 the DF mode is used exclusively for direct I/O +operations. The glocks are basically a lock plus some routines which deal +with cache management. The following rules apply for the cache: + +========== ============== ========== ========== ============== +Glock mode Cache Metadata Cache data Dirty Data Dirty Metadata +========== ============== ========== ========== ============== + UN No No No No + DF Yes No No No + SH Yes Yes No No + EX Yes Yes Yes Yes +========== ============== ========== ========== ============== + +These rules are implemented using the various glock operations which +are defined for each type of glock. Not all types of glocks use +all the modes. Only inode glocks use the DF mode for example. + +Table of glock operations and per type constants: + +============== ============================================================= +Field Purpose +============== ============================================================= +go_sync Called before remote state change (e.g. to sync dirty data) +go_xmote_bh Called after remote state change (e.g. to refill cache) +go_inval Called if remote state change requires invalidating the cache +go_instantiate Called when a glock has been acquired +go_held Called every time a glock holder is acquired +go_dump Called to print content of object for debugfs file, or on + error to dump glock to the log. +go_callback Called if the DLM sends a callback to drop this lock +go_unlocked Called when a glock is unlocked (dlm_unlock()) +go_type The type of the glock, ``LM_TYPE_*`` +go_flags GLOF_ASPACE is set, if the glock has an address space + associated with it +============== ============================================================= + +The minimum hold time for each lock is the time after a remote lock +grant for which we ignore remote demote requests. This is in order to +prevent a situation where locks are being bounced around the cluster +from node to node with none of the nodes making any progress. This +tends to show up most with shared mmapped files which are being written +to by multiple nodes. By delaying the demotion in response to a +remote callback, that gives the userspace program time to make +some progress before the pages are unmapped. + +Eventually, we hope to make the glock "EX" mode locally shared such that any +local locking will be done with the i_mutex as required rather than via the +glock. + +Locking rules for glock operations: + +============== ====================== ============================= +Operation GLF_LOCK bit lock held gl_lockref.lock spinlock held +============== ====================== ============================= +go_sync Yes No +go_xmote_bh Yes No +go_inval Yes No +go_instantiate No No +go_held No No +go_dump Sometimes Yes +go_callback Sometimes (N/A) Yes +go_unlocked Yes No +============== ====================== ============================= + +.. Note:: + + Operations must not drop either the bit lock or the spinlock + if its held on entry. go_dump and do_demote_ok must never block. + Note that go_dump will only be called if the glock's state + indicates that it is caching up-to-date data. + +Glock locking order within GFS2: + + 1. i_rwsem (if required) + 2. Rename glock (for rename only) + 3. Inode glock(s) + (Parents before children, inodes at "same level" with same parent in + lock number order) + 4. Rgrp glock(s) (for (de)allocation operations) + 5. Transaction glock (via gfs2_trans_begin) for non-read operations + 6. i_rw_mutex (if required) + 7. Page lock (always last, very important!) + +There are two glocks per inode. One deals with access to the inode +itself (locking order as above), and the other, known as the iopen +glock is used in conjunction with the i_nlink field in the inode to +determine the lifetime of the inode in question. Locking of inodes +is on a per-inode basis. Locking of rgrps is on a per rgrp basis. +In general we prefer to lock local locks prior to cluster locks. + +Glock Statistics +---------------- + +The stats are divided into two sets: those relating to the +super block and those relating to an individual glock. The +super block stats are done on a per cpu basis in order to +try and reduce the overhead of gathering them. They are also +further divided by glock type. All timings are in nanoseconds. + +In the case of both the super block and glock statistics, +the same information is gathered in each case. The super +block timing statistics are used to provide default values for +the glock timing statistics, so that newly created glocks +should have, as far as possible, a sensible starting point. +The per-glock counters are initialised to zero when the +glock is created. The per-glock statistics are lost when +the glock is ejected from memory. + +The statistics are divided into three pairs of mean and +variance, plus two counters. The mean/variance pairs are +smoothed exponential estimates and the algorithm used is +one which will be very familiar to those used to calculation +of round trip times in network code. See "TCP/IP Illustrated, +Volume 1", W. Richard Stevens, sect 21.3, "Round-Trip Time Measurement", +p. 299 and onwards. Also, Volume 2, Sect. 25.10, p. 838 and onwards. +Unlike the TCP/IP Illustrated case, the mean and variance are +not scaled, but are in units of integer nanoseconds. + +The three pairs of mean/variance measure the following +things: + + 1. DLM lock time (non-blocking requests) + 2. DLM lock time (blocking requests) + 3. Inter-request time (again to the DLM) + +A non-blocking request is one which will complete right +away, whatever the state of the DLM lock in question. That +currently means any requests when (a) the current state of +the lock is exclusive, i.e. a lock demotion (b) the requested +state is either null or unlocked (again, a demotion) or (c) the +"try lock" flag is set. A blocking request covers all the other +lock requests. + +There are two counters. The first is there primarily to show +how many lock requests have been made, and thus how much data +has gone into the mean/variance calculations. The other counter +is counting queuing of holders at the top layer of the glock +code. Hopefully that number will be a lot larger than the number +of dlm lock requests issued. + +So why gather these statistics? There are several reasons +we'd like to get a better idea of these timings: + +1. To be able to better set the glock "min hold time" +2. To spot performance issues more easily +3. To improve the algorithm for selecting resource groups for + allocation (to base it on lock wait time, rather than blindly + using a "try lock") + +Due to the smoothing action of the updates, a step change in +some input quantity being sampled will only fully be taken +into account after 8 samples (or 4 for the variance) and this +needs to be carefully considered when interpreting the +results. + +Knowing both the time it takes a lock request to complete and +the average time between lock requests for a glock means we +can compute the total percentage of the time for which the +node is able to use a glock vs. time that the rest of the +cluster has its share. That will be very useful when setting +the lock min hold time. + +Great care has been taken to ensure that we +measure exactly the quantities that we want, as accurately +as possible. There are always inaccuracies in any +measuring system, but I hope this is as accurate as we +can reasonably make it. + +Per sb stats can be found here:: + + /sys/kernel/debug/gfs2//sbstats + +Per glock stats can be found here:: + + /sys/kernel/debug/gfs2//glstats + +Assuming that debugfs is mounted on /sys/kernel/debug and also +that is replaced with the name of the gfs2 filesystem +in question. + +The abbreviations used in the output as are follows: + +========= ================================================================ +srtt Smoothed round trip time for non blocking dlm requests +srttvar Variance estimate for srtt +srttb Smoothed round trip time for (potentially) blocking dlm requests +srttvarb Variance estimate for srttb +sirt Smoothed inter request time (for dlm requests) +sirtvar Variance estimate for sirt +dlm Number of dlm requests made (dcnt in glstats file) +queue Number of glock requests queued (qcnt in glstats file) +========= ================================================================ + +The sbstats file contains a set of these stats for each glock type (so 8 lines +for each type) and for each cpu (one column per cpu). The glstats file contains +a set of these stats for each glock in a similar format to the glocks file, but +using the format mean/variance for each of the timing stats. + +The gfs2_glock_lock_time tracepoint prints out the current values of the stats +for the glock in question, along with some addition information on each dlm +reply that is received: + +====== ======================================= +status The status of the dlm request +flags The dlm request flags +tdiff The time taken by this specific request +====== ======================================= + +(remaining fields as per above list) + + diff --git a/Documentation/filesystems/gfs2/index.rst b/Documentation/filesystems/gfs2/index.rst new file mode 100644 index 00000000000000..e5e19540356138 --- /dev/null +++ b/Documentation/filesystems/gfs2/index.rst @@ -0,0 +1,64 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==================== +Global File System 2 +==================== + +Overview +======== + +GFS2 is a cluster file system. It allows a cluster of computers to +simultaneously use a block device that is shared between them (with FC, +iSCSI, NBD, etc). GFS2 reads and writes to the block device like a local +file system, but also uses a lock module to allow the computers coordinate +their I/O so file system consistency is maintained. One of the nifty +features of GFS2 is perfect consistency -- changes made to the file system +on one machine show up immediately on all other machines in the cluster. + +GFS2 uses interchangeable inter-node locking mechanisms, the currently +supported mechanisms are: + + lock_nolock + - allows GFS2 to be used as a local file system + + lock_dlm + - uses the distributed lock manager (dlm) for inter-node locking. + The dlm is found at linux/fs/dlm/ + +lock_dlm depends on user space cluster management systems found +at the URL above. + +To use GFS2 as a local file system, no external clustering systems are +needed, simply:: + + $ mkfs -t gfs2 -p lock_nolock -j 1 /dev/block_device + $ mount -t gfs2 /dev/block_device /dir + +The gfs2-utils package is required on all cluster nodes and, for lock_dlm, you +will also need the dlm and corosync user space utilities configured as per the +documentation. + +gfs2-utils can be found at https://pagure.io/gfs2-utils + +GFS2 is not on-disk compatible with previous versions of GFS, but it +is pretty close. + +The following man pages are available from gfs2-utils: + + ============ ============================================= + fsck.gfs2 to repair a filesystem + gfs2_grow to expand a filesystem online + gfs2_jadd to add journals to a filesystem online + tunegfs2 to manipulate, examine and tune a filesystem + gfs2_convert to convert a gfs filesystem to GFS2 in-place + mkfs.gfs2 to make a filesystem + ============ ============================================= + +Implementation Notes +==================== + +.. toctree:: + :maxdepth: 1 + + glocks + uevents diff --git a/Documentation/filesystems/gfs2/uevents.rst b/Documentation/filesystems/gfs2/uevents.rst new file mode 100644 index 00000000000000..f162a2c76c696c --- /dev/null +++ b/Documentation/filesystems/gfs2/uevents.rst @@ -0,0 +1,112 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================ +uevents and GFS2 +================ + +During the lifetime of a GFS2 mount, a number of uevents are generated. +This document explains what the events are and what they are used +for (by gfs_controld in gfs2-utils). + +A list of GFS2 uevents +====================== + +1. ADD +------ + +The ADD event occurs at mount time. It will always be the first +uevent generated by the newly created filesystem. If the mount +is successful, an ONLINE uevent will follow. If it is not successful +then a REMOVE uevent will follow. + +The ADD uevent has two environment variables: SPECTATOR=[0|1] +and RDONLY=[0|1] that specify the spectator status (a read-only mount +with no journal assigned), and read-only (with journal assigned) status +of the filesystem respectively. + +2. ONLINE +--------- + +The ONLINE uevent is generated after a successful mount or remount. It +has the same environment variables as the ADD uevent. The ONLINE +uevent, along with the two environment variables for spectator and +RDONLY are a relatively recent addition (2.6.32-rc+) and will not +be generated by older kernels. + +3. CHANGE +--------- + +The CHANGE uevent is used in two places. One is when reporting the +successful mount of the filesystem by the first node (FIRSTMOUNT=Done). +This is used as a signal by gfs_controld that it is then ok for other +nodes in the cluster to mount the filesystem. + +The other CHANGE uevent is used to inform of the completion +of journal recovery for one of the filesystems journals. It has +two environment variables, JID= which specifies the journal id which +has just been recovered, and RECOVERY=[Done|Failed] to indicate the +success (or otherwise) of the operation. These uevents are generated +for every journal recovered, whether it is during the initial mount +process or as the result of gfs_controld requesting a specific journal +recovery via the /sys/fs/gfs2//lock_module/recovery file. + +Because the CHANGE uevent was used (in early versions of gfs_controld) +without checking the environment variables to discover the state, we +cannot add any more functions to it without running the risk of +someone using an older version of the user tools and breaking their +cluster. For this reason the ONLINE uevent was used when adding a new +uevent for a successful mount or remount. + +4. OFFLINE +---------- + +The OFFLINE uevent is only generated due to filesystem errors and is used +as part of the "withdraw" mechanism. Currently this doesn't give any +information about what the error is, which is something that needs to +be fixed. + +5. REMOVE +--------- + +The REMOVE uevent is generated at the end of an unsuccessful mount +or at the end of a umount of the filesystem. All REMOVE uevents will +have been preceded by at least an ADD uevent for the same filesystem, +and unlike the other uevents is generated automatically by the kernel's +kobject subsystem. + + +Information common to all GFS2 uevents (uevent environment variables) +===================================================================== + +1. LOCKTABLE= +-------------- + +The LOCKTABLE is a string, as supplied on the mount command +line (locktable=) or via fstab. It is used as a filesystem label +as well as providing the information for a lock_dlm mount to be +able to join the cluster. + +2. LOCKPROTO= +------------- + +The LOCKPROTO is a string, and its value depends on what is set +on the mount command line, or via fstab. It will be either +lock_nolock or lock_dlm. In the future other lock managers +may be supported. + +3. JOURNALID= +------------- + +If a journal is in use by the filesystem (journals are not +assigned for spectator mounts) then this will give the +numeric journal id in all GFS2 uevents. + +4. UUID= +-------- + +With recent versions of gfs2-utils, mkfs.gfs2 writes a UUID +into the filesystem superblock. If it exists, this will +be included in every uevent relating to the filesystem. + + + diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst index af516e528ded05..f4873197587df7 100644 --- a/Documentation/filesystems/index.rst +++ b/Documentation/filesystems/index.rst @@ -89,9 +89,7 @@ Documentation for filesystem implementations. ext3 ext4/index f2fs - gfs2 - gfs2-uevents - gfs2-glocks + gfs2/index hfs hfsplus hpfs diff --git a/Documentation/filesystems/iomap/operations.rst b/Documentation/filesystems/iomap/operations.rst index 387fd9cc72ca6c..da982ca7e41370 100644 --- a/Documentation/filesystems/iomap/operations.rst +++ b/Documentation/filesystems/iomap/operations.rst @@ -135,6 +135,27 @@ These ``struct kiocb`` flags are significant for buffered I/O with iomap: * ``IOCB_DONTCACHE``: Turns on ``IOMAP_DONTCACHE``. +``struct iomap_read_ops`` +-------------------------- + +.. code-block:: c + + struct iomap_read_ops { + int (*read_folio_range)(const struct iomap_iter *iter, + struct iomap_read_folio_ctx *ctx, size_t len); + void (*submit_read)(struct iomap_read_folio_ctx *ctx); + }; + +iomap calls these functions: + + - ``read_folio_range``: Called to read in the range. This must be provided + by the caller. If this succeeds, iomap_finish_folio_read() must be called + after the range is read in, regardless of whether the read succeeded or + failed. + + - ``submit_read``: Submit any pending read requests. This function is + optional. + Internal per-Folio State ------------------------ @@ -182,6 +203,28 @@ The ``flags`` argument to ``->iomap_begin`` will be set to zero. The pagecache takes whatever locks it needs before calling the filesystem. +Both ``iomap_readahead`` and ``iomap_read_folio`` pass in a ``struct +iomap_read_folio_ctx``: + +.. code-block:: c + + struct iomap_read_folio_ctx { + const struct iomap_read_ops *ops; + struct folio *cur_folio; + struct readahead_control *rac; + void *read_ctx; + }; + +``iomap_readahead`` must set: + * ``ops->read_folio_range()`` and ``rac`` + +``iomap_read_folio`` must set: + * ``ops->read_folio_range()`` and ``cur_folio`` + +``ops->submit_read()`` and ``read_ctx`` are optional. ``read_ctx`` is used to +pass in any custom data the caller needs accessible in the ops callbacks for +fulfilling reads. + Buffered Writes --------------- @@ -317,6 +360,9 @@ The fields are as follows: delalloc reservations to avoid having delalloc reservations for clean pagecache. This function must be supplied by the filesystem. + If this succeeds, iomap_finish_folio_write() must be called once writeback + completes for the range, regardless of whether the writeback succeeded or + failed. - ``writeback_submit``: Submit the previous built writeback context. Block based file systems should use the iomap_ioend_writeback_submit @@ -444,10 +490,6 @@ These ``struct kiocb`` flags are significant for direct I/O with iomap: Only meaningful for asynchronous I/O, and only if the entire I/O can be issued as a single ``struct bio``. - * ``IOCB_DIO_CALLER_COMP``: Try to run I/O completion from the caller's - process context. - See ``linux/fs.h`` for more details. - Filesystems should call ``iomap_dio_rw`` from ``->read_iter`` and ``->write_iter``, and set ``FMODE_CAN_ODIRECT`` in the ``->open`` function for the file. diff --git a/Documentation/filesystems/locking.rst b/Documentation/filesystems/locking.rst index 77704fde984574..04c7691e50e01f 100644 --- a/Documentation/filesystems/locking.rst +++ b/Documentation/filesystems/locking.rst @@ -416,6 +416,7 @@ lm_change yes no no lm_breaker_owns_lease: yes no no lm_lock_expirable yes no no lm_expire_lock no no yes +lm_open_conflict yes no no ====================== ============= ================= ========= buffer_head diff --git a/Documentation/filesystems/nfs/index.rst b/Documentation/filesystems/nfs/index.rst index 95c2c009874cef..a29a212b5b4df4 100644 --- a/Documentation/filesystems/nfs/index.rst +++ b/Documentation/filesystems/nfs/index.rst @@ -13,5 +13,6 @@ NFS rpc-cache rpc-server-gss nfs41-server + nfsd-io-modes knfsd-stats reexport diff --git a/Documentation/filesystems/nfs/nfsd-io-modes.rst b/Documentation/filesystems/nfs/nfsd-io-modes.rst new file mode 100644 index 00000000000000..0fd6e82478fe6e --- /dev/null +++ b/Documentation/filesystems/nfs/nfsd-io-modes.rst @@ -0,0 +1,153 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============= +NFSD IO MODES +============= + +Overview +======== + +NFSD has historically always used buffered IO when servicing READ and +WRITE operations. BUFFERED is NFSD's default IO mode, but it is possible +to override that default to use either DONTCACHE or DIRECT IO modes. + +Experimental NFSD debugfs interfaces are available to allow the NFSD IO +mode used for READ and WRITE to be configured independently. See both: + +- /sys/kernel/debug/nfsd/io_cache_read +- /sys/kernel/debug/nfsd/io_cache_write + +The default value for both io_cache_read and io_cache_write reflects +NFSD's default IO mode (which is NFSD_IO_BUFFERED=0). + +Based on the configured settings, NFSD's IO will either be: + +- cached using page cache (NFSD_IO_BUFFERED=0) +- cached but removed from page cache on completion (NFSD_IO_DONTCACHE=1) +- not cached stable_how=NFS_UNSTABLE (NFSD_IO_DIRECT=2) + +To set an NFSD IO mode, write a supported value (0 - 2) to the +corresponding IO operation's debugfs interface, e.g.:: + + echo 2 > /sys/kernel/debug/nfsd/io_cache_read + echo 2 > /sys/kernel/debug/nfsd/io_cache_write + +To check which IO mode NFSD is using for READ or WRITE, simply read the +corresponding IO operation's debugfs interface, e.g.:: + + cat /sys/kernel/debug/nfsd/io_cache_read + cat /sys/kernel/debug/nfsd/io_cache_write + +If you experiment with NFSD's IO modes on a recent kernel and have +interesting results, please report them to linux-nfs@vger.kernel.org + +NFSD DONTCACHE +============== + +DONTCACHE offers a hybrid approach to servicing IO that aims to offer +the benefits of using DIRECT IO without any of the strict alignment +requirements that DIRECT IO imposes. To achieve this buffered IO is used +but the IO is flagged to "drop behind" (meaning associated pages are +dropped from the page cache) when IO completes. + +DONTCACHE aims to avoid what has proven to be a fairly significant +limition of Linux's memory management subsystem if/when large amounts of +data is infrequently accessed (e.g. read once _or_ written once but not +read until much later). Such use-cases are particularly problematic +because the page cache will eventually become a bottleneck to servicing +new IO requests. + +For more context on DONTCACHE, please see these Linux commit headers: + +- Overview: 9ad6344568cc3 ("mm/filemap: change filemap_create_folio() + to take a struct kiocb") +- for READ: 8026e49bff9b1 ("mm/filemap: add read support for + RWF_DONTCACHE") +- for WRITE: 974c5e6139db3 ("xfs: flag as supporting FOP_DONTCACHE") + +NFSD_IO_DONTCACHE will fall back to NFSD_IO_BUFFERED if the underlying +filesystem doesn't indicate support by setting FOP_DONTCACHE. + +NFSD DIRECT +=========== + +DIRECT IO doesn't make use of the page cache, as such it is able to +avoid the Linux memory management's page reclaim scalability problems +without resorting to the hybrid use of page cache that DONTCACHE does. + +Some workloads benefit from NFSD avoiding the page cache, particularly +those with a working set that is significantly larger than available +system memory. The pathological worst-case workload that NFSD DIRECT has +proven to help most is: NFS client issuing large sequential IO to a file +that is 2-3 times larger than the NFS server's available system memory. +The reason for such improvement is NFSD DIRECT eliminates a lot of work +that the memory management subsystem would otherwise be required to +perform (e.g. page allocation, dirty writeback, page reclaim). When +using NFSD DIRECT, kswapd and kcompactd are no longer commanding CPU +time trying to find adequate free pages so that forward IO progress can +be made. + +The performance win associated with using NFSD DIRECT was previously +discussed on linux-nfs, see: +https://lore.kernel.org/linux-nfs/aEslwqa9iMeZjjlV@kernel.org/ + +But in summary: + +- NFSD DIRECT can significantly reduce memory requirements +- NFSD DIRECT can reduce CPU load by avoiding costly page reclaim work +- NFSD DIRECT can offer more deterministic IO performance + +As always, your mileage may vary and so it is important to carefully +consider if/when it is beneficial to make use of NFSD DIRECT. When +assessing comparative performance of your workload please be sure to log +relevant performance metrics during testing (e.g. memory usage, cpu +usage, IO performance). Using perf to collect perf data that may be used +to generate a "flamegraph" for work Linux must perform on behalf of your +test is a really meaningful way to compare the relative health of the +system and how switching NFSD's IO mode changes what is observed. + +If NFSD_IO_DIRECT is specified by writing 2 (or 3 and 4 for WRITE) to +NFSD's debugfs interfaces, ideally the IO will be aligned relative to +the underlying block device's logical_block_size. Also the memory buffer +used to store the READ or WRITE payload must be aligned relative to the +underlying block device's dma_alignment. + +But NFSD DIRECT does handle misaligned IO in terms of O_DIRECT as best +it can: + +Misaligned READ: + If NFSD_IO_DIRECT is used, expand any misaligned READ to the next + DIO-aligned block (on either end of the READ). The expanded READ is + verified to have proper offset/len (logical_block_size) and + dma_alignment checking. + +Misaligned WRITE: + If NFSD_IO_DIRECT is used, split any misaligned WRITE into a start, + middle and end as needed. The large middle segment is DIO-aligned + and the start and/or end are misaligned. Buffered IO is used for the + misaligned segments and O_DIRECT is used for the middle DIO-aligned + segment. DONTCACHE buffered IO is _not_ used for the misaligned + segments because using normal buffered IO offers significant RMW + performance benefit when handling streaming misaligned WRITEs. + +Tracing: + The nfsd_read_direct trace event shows how NFSD expands any + misaligned READ to the next DIO-aligned block (on either end of the + original READ, as needed). + + This combination of trace events is useful for READs:: + + echo 1 > /sys/kernel/tracing/events/nfsd/nfsd_read_vector/enable + echo 1 > /sys/kernel/tracing/events/nfsd/nfsd_read_direct/enable + echo 1 > /sys/kernel/tracing/events/nfsd/nfsd_read_io_done/enable + echo 1 > /sys/kernel/tracing/events/xfs/xfs_file_direct_read/enable + + The nfsd_write_direct trace event shows how NFSD splits a given + misaligned WRITE into a DIO-aligned middle segment. + + This combination of trace events is useful for WRITEs:: + + echo 1 > /sys/kernel/tracing/events/nfsd/nfsd_write_opened/enable + echo 1 > /sys/kernel/tracing/events/nfsd/nfsd_write_direct/enable + echo 1 > /sys/kernel/tracing/events/nfsd/nfsd_write_io_done/enable + echo 1 > /sys/kernel/tracing/events/xfs/xfs_file_direct_write/enable diff --git a/Documentation/filesystems/nfs/nfsd-maintainer-entry-profile.rst b/Documentation/filesystems/nfs/nfsd-maintainer-entry-profile.rst new file mode 100644 index 00000000000000..4d6b57dbab2a24 --- /dev/null +++ b/Documentation/filesystems/nfs/nfsd-maintainer-entry-profile.rst @@ -0,0 +1,547 @@ +NFSD Maintainer Entry Profile +============================= + +A Maintainer Entry Profile supplements the top-level process +documents (found in Documentation/process/) with customs that are +specific to a subsystem and its maintainers. A contributor may use +this document to set their expectations and avoid common mistakes. +A maintainer may use these profiles to look across subsystems for +opportunities to converge on best common practices. + +Overview +-------- +The Network File System (NFS) is a standardized family of network +protocols that enable access to files across a set of network- +connected peer hosts. Applications on NFS clients access files that +reside on file systems that are shared by NFS servers. A single +network peer can act as both an NFS client and an NFS server. + +NFSD refers to the NFS server implementation included in the Linux +kernel. An in-kernel NFS server has fast access to files stored +in file systems local to that server. NFSD can share files stored +on most of the file system types native to Linux, including xfs, +ext4, btrfs, and tmpfs. + +Mailing list +------------ +The linux-nfs@vger.kernel.org mailing list is a public list. Its +purpose is to enable collaboration among developers working on the +Linux NFS stack, both client and server. It is not a place for +conversations that are not related directly to the Linux NFS stack. + +The linux-nfs mailing list is archived on `lore.kernel.org `_. + +The Linux NFS community does not have any chat room. + +Reporting bugs +-------------- +If you experience an NFSD-related bug on a distribution-built +kernel, please start by working with your Linux distributor. + +Bug reports against upstream Linux code bases are welcome on the +linux-nfs@vger.kernel.org mailing list, where some active triage +can be done. NFSD bugs may also be reported in the Linux kernel +community's bugzilla at: + + https://bugzilla.kernel.org + +Please file NFSD-related bugs under the "Filesystems/NFSD" +component. In general, including as much detail as possible is a +good start, including pertinent system log messages from both +the client and server. + +User space software related to NFSD, such as mountd or the exportfs +command, is contained in the nfs-utils package. Report problems +with those components to linux-nfs@vger.kernel.org. You might be +directed to move the report to a specific bug tracker. + +Contributor's Guide +------------------- + +Standards compliance +~~~~~~~~~~~~~~~~~~~~ +The priority is for NFSD to interoperate fully with the Linux NFS +client. We also test against other popular NFS client implementa- +tions regularly at NFS bake-a-thon events (also known as plug- +fests). Non-Linux NFS clients are not part of upstream NFSD CI/CD. + +The NFSD community strives to provide an NFS server implementation +that interoperates with all standards-compliant NFS client +implementations. This is done by staying as close as is sensible to +the normative mandates in the IETF's published NFS, RPC, and GSS-API +standards. + +It is always useful to reference an RFC and section number in a code +comment where behavior deviates from the standard (and even when the +behavior is compliant but the implementation is obfuscatory). + +On the rare occasion when a deviation from standard-mandated +behavior is needed, brief documentation of the use case or +deficiencies in the standard is a required part of in-code +documentation. + +Care must always be taken to avoid leaking local error codes (ie, +errnos) to clients of NFSD. A proper NFS status code is always +required in NFS protocol replies. + +NFSD administrative interfaces +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +NFSD administrative interfaces include: + +- an NFSD or SUNRPC module parameter + +- export options in /etc/exports + +- files under /proc/fs/nfsd/ or /proc/sys/sunrpc/ + +- the NFSD netlink protocol + +Frequently, a request is made to introduce or modify one of NFSD's +traditional administrative interfaces. Certainly it is technically +easy to introduce a new administrative setting. However, there are +good reasons why the NFSD maintainers prefer to leave that as a last +resort: + +- As with any API, administrative interfaces are difficult to get + right. + +- Once they are documented and have a legacy of use, administrative + interfaces become difficult to modify or remove. + +- Every new administrative setting multiplies the NFSD test matrix. + +- The cost of one administrative interface is incremental, but costs + add up across all of the existing interfaces. + +It is often better for everyone if effort is made up front to +understanding the underlying requirement of the new setting, and +then trying to make it tune itself (or to become otherwise +unnecessary). + +If a new setting is indeed necessary, first consider adding it to +the NFSD netlink protocol. Or if it doesn't need to be a reliable +long term user space feature, it can be added to NFSD's menagerie of +experimental settings which reside under /sys/kernel/debug/nfsd/ . + +Field observability +~~~~~~~~~~~~~~~~~~~ +NFSD employs several different mechanisms for observing operation, +including counters, printks, WARNings, and static trace points. Each +have their strengths and weaknesses. Contributors should select the +most appropriate tool for their task. + +- BUG must be avoided if at all possible, as it will frequently + result in a full system crash. + +- WARN is appropriate only when a full stack trace is useful. + +- printk can show detailed information. These must not be used + in code paths where they can be triggered repeatedly by remote + users. + +- dprintk can show detailed information, but can be enabled only + in pre-set groups. The overhead of emitting output makes dprintk + inappropriate for frequent operations like I/O. + +- Counters are always on, but provide little information about + individual events other than how frequently they occur. + +- static trace points can be enabled individually or in groups + (via a glob). These are generally low overhead, and thus are + favored for use in hot paths. + +- dynamic tracing, such as kprobes or eBPF, are quite flexible but + cannot be used in certain environments (eg, full kernel lock- + down). + +Testing +~~~~~~~ +The kdevops project + + https://github.com/linux-kdevops/kdevops + +contains several NFS-specific workflows, as well as the community +standard fstests suite. These workflows are based on open source +testing tools such as ltp and fio. Contributors are encouraged to +use these tools without kdevops, or contributors should install and +use kdevops themselves to verify their patches before submission. + +Coding style +~~~~~~~~~~~~ +Follow the coding style preferences described in + + Documentation/process/coding-style.rst + +with the following exceptions: + +- Add new local variables to a function in reverse Christmas tree + order + +- Use the kdoc comment style for + + non-static functions + + static inline functions + + static functions that are callbacks/virtual functions + +- All new function names start with ``nfsd_`` for non-NFS-version- + specific functions. + +- New function names that are specific to NFSv2 or NFSv3, or are + used by all minor versions of NFSv4, use ``nfsdN_`` where N is + the version. + +- New function names specific to an NFSv4 minor version can be + named with ``nfsd4M_`` where M is the minor version. + +Patch preparation +~~~~~~~~~~~~~~~~~ +Read and follow all guidelines in + + Documentation/process/submitting-patches.rst + +Use tagging to identify all patch authors. However, reviewers and +testers should be added by replying to the email patch submission. +Email is extensively used in order to publicly archive review and +testing attributions. These tags are automatically inserted into +your patches when they are applied. + +The code in the body of the diff already shows /what/ is being +changed. Thus it is not necessary to repeat that in the patch +description. Instead, the description should contain one or more +of: + +- A brief problem statement ("what is this patch trying to fix?") + with a root-cause analysis. + +- End-user visible symptoms or items that a support engineer might + use to search for the patch, like stack traces. + +- A brief explanation of why the patch is the best way to address + the problem. + +- Any context that reviewers might need to understand the changes + made by the patch. + +- Any relevant benchmarking results, and/or functional test results. + +As detailed in Documentation/process/submitting-patches.rst, +identify the point in history that the issue being addressed was +introduced by using a Fixes: tag. + +Mention in the patch description if that point in history cannot be +determined -- that is, no Fixes: tag can be provided. In this case, +please make it clear to maintainers whether an LTS backport is +needed even though there is no Fixes: tag. + +The NFSD maintainers prefer to add stable tagging themselves, after +public discussion in response to the patch submission. Contributors +may suggest stable tagging, but be aware that many version +management tools add such stable Cc's when you post your patches. +Don't add "Cc: stable" unless you are absolutely sure the patch +needs to go to stable during the initial submission process. + +Patch submission +~~~~~~~~~~~~~~~~ +Patches to NFSD are submitted via the kernel's email-based review +process that is common to most other kernel subsystems. + +Just before each submission, rebase your patch or series on the +nfsd-testing branch at + + https://git.kernel.org/pub/scm/linux/kernel/git/cel/linux.git + +The NFSD subsystem is maintained separately from the Linux in-kernel +NFS client. The NFSD maintainers do not normally take submissions +for client changes, nor can they respond authoritatively to bug +reports or feature requests for NFS client code. + +This means that contributors might be asked to resubmit patches if +they were emailed to the incorrect set of maintainers and reviewers. +This is not a rejection, but simply a correction of the submission +process. + +When in doubt, consult the NFSD entry in the MAINTAINERS file to +see which files and directories fall under the NFSD subsystem. + +The proper set of email addresses for NFSD patches are: + +To: the NFSD maintainers and reviewers listed in MAINTAINERS +Cc: linux-nfs@vger.kernel.org and optionally linux-kernel@ + +If there are other subsystems involved in the patches (for example +MM or RDMA) their primary mailing list address can be included in +the Cc: field. Other contributors and interested parties may be +included there as well. + +In general we prefer that contributors use common patch email tools +such as "git send-email" or "stg email format/send", which tend to +get the details right without a lot of fuss. + +A series consisting of a single patch is not required to have a +cover letter. However, a cover letter can be included if there is +substantial context that is not appropriate to include in the +patch description. + +Please note that, with an e-mail based submission process, series +cover letters are not part of the work that is committed to the +kernel source code base or its commit history. Therefore always try +to keep pertinent information in the patch descriptions. + +Design documentation is welcome, but as cover letters are not +preserved, a perhaps better option is to include a patch that adds +such documentation under Documentation/filesystems/nfs/. + +Reviewers will ask about test coverage and what use cases the +patches are expected to address. Please be prepared to answer these +questions. + +Review comments from maintainers might be politely stated, but in +general, these are not optional to address when they are actionable. +If necessary, the maintainers retain the right to not apply patches +when contributors refuse to address reasonable requests. + +Post changes to kernel source code and user space source code as +separate series. You can connect the two series with comments in +your cover letters. + +Generally the NFSD maintainers ask for a reposts even for simple +modifications in order to publicly archive the request and the +resulting repost before it is pulled into the NFSD trees. This +also enables us to rebuild a patch series quickly without missing +changes that might have been discussed via email. + +Avoid frequently reposting large series with only small changes. As +a rule of thumb, posting substantial changes more than once a week +will result in reviewer overload. + +Remember, there are only a handful of subsystem maintainers and +reviewers, but potentially many sources of contributions. The +maintainers and reviewers, therefore, are always the less scalable +resource. Be kind to your friendly neighborhood maintainer. + +Patch Acceptance +~~~~~~~~~~~~~~~~ +There isn't a formal review process for NFSD, but we like to see +at least two Reviewed-by: notices for patches that are more than +simple clean-ups. Reviews are done in public on +linux-nfs@vger.kernel.org and are archived on lore.kernel.org. + +Currently the NFSD patch queues are maintained in branches here: + + https://git.kernel.org/pub/scm/linux/kernel/git/cel/linux.git + +The NFSD maintainers apply patches initially to the nfsd-testing +branch, which is always open to new submissions. Patches can be +applied while review is ongoing. nfsd-testing is a topic branch, +so it can change frequently, it will be rebased, and your patch +might get dropped if there is a problem with it. + +Generally a script-generated "thank you" email will indicate when +your patch has been added to the nfsd-testing branch. You can track +the progress of your patch using the linux-nfs patchworks instance: + + https://patchwork.kernel.org/project/linux-nfs/list/ + +While your patch is in nfsd-testing, it is exposed to a variety of +test environments, including community zero-day bots, static +analysis tools, and NFSD continuous integration testing. The soak +period is three to four weeks. + +Each patch that survives in nfsd-testing for the soak period without +changes is moved to the nfsd-next branch. + +The nfsd-next branch is automatically merged into linux-next and +fs-next on a nightly basis. + +Patches that survive in nfsd-next are included in the next NFSD +merge window pull request. These windows typically occur once every +63 days (nine weeks). + +When the upstream merge window closes, the nfsd-next branch is +renamed nfsd-fixes, and a new nfsd-next branch is created, based on +the upstream -rc1 tag. + +Fixes that are destined for an upstream -rc release also run the +nfsd-testing gauntlet, but are then applied to the nfsd-fixes +branch. That branch is made available for Linus to pull after a +short time. In order to limit the risk of introducing regressions, +we limit such fixes to emergency situations or fixes to breakage +that occurred during the most recent upstream merge. + +Please make it clear when submitting an emergency patch that +immediate action (either application to -rc or LTS backport) is +needed. + +Sensitive patch submissions and bug reports +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +CVEs are generated by specific members of the Linux kernel community +and several external entities. The Linux NFS community does not emit +or assign CVEs. CVEs are assigned after an issue and its fix are +known. + +However, the NFSD maintainers sometimes receive sensitive security +reports, and at times these are significant enough to need to be +embargoed. In such rare cases, fixes can be developed and reviewed +out of the public eye. + +Please be aware that many version management tools add the stable +Cc's when you post your patches. This is generally a nuisance, but +it can result in outing an embargoed security issue accidentally. +Don't add "Cc: stable" unless you are absolutely sure the patch +needs to go to stable@ during the initial submission process. + +Patches that are merged without ever appearing on any list, and +which carry a Reported-by: or Fixes: tag are detected as suspicious +by security-focused people. We encourage that, after any private +review, security-sensitive patches should be posted to linux-nfs@ +for the usual public review, archiving, and test period. + +LLM-generated submissions +~~~~~~~~~~~~~~~~~~~~~~~~~ +The Linux kernel community as a whole is still exploring the new +world of LLM-generated code. The NFSD maintainers will entertain +submission of patches that are partially or wholly generated by +LLM-based development tools. Such submissions are held to the +same standards as submissions created entirely by human authors: + +- The human contributor identifies themselves via a Signed-off-by: + tag. This tag counts as a DoC. + +- The human contributor is solely responsible for code provenance + and any contamination by inadvertently-included code with a + conflicting license, as usual. + +- The human contributor must be able to answer and address review + questions. A patch description such as "This fixed my problem + but I don't know why" is not acceptable. + +- The contribution is subjected to the same test regimen as all + other submissions. + +- An indication (via a Generated-by: tag or otherwise) that the + contribution is LLM-generated is not required. + +It is easy to address review comments and fix requests in LLM +generated code. So easy, in fact, that it becomes tempting to repost +refreshed code immediately. Please resist that temptation. + +As always, please avoid reposting series revisions more than once +every 24 hours. + +Clean-up patches +~~~~~~~~~~~~~~~~ +The NFSD maintainers discourage patches which perform simple clean- +ups, which are not in the context of other work. For example: + +* Addressing ``checkpatch.pl`` warnings after merge +* Addressing :ref:`Local variable ordering` issues +* Addressing long-standing whitespace damage + +This is because it is felt that the churn that such changes produce +comes at a greater cost than the value of such clean-ups. + +Conversely, spelling and grammar fixes are encouraged. + +Stable and LTS support +---------------------- +Upstream NFSD continuous integration testing runs against LTS trees +whenever they are updated. + +Please indicate when a patch containing a fix needs to be considered +for LTS kernels, either via a Fixes: tag or explicit mention. + +Feature requests +---------------- +There is no one way to make an official feature request, but +discussion about the request should eventually make its way to +the linux-nfs@vger.kernel.org mailing list for public review by +the community. + +Subsystem boundaries +~~~~~~~~~~~~~~~~~~~~ +NFSD itself is not much more than a protocol engine. This means its +primary responsibility is to translate the NFS protocol into API +calls in the Linux kernel. For example, NFSD is not responsible for +knowing exactly how bytes or file attributes are managed on a block +device. It relies on other kernel subsystems for that. + +If the subsystems on which NFSD relies do not implement a particular +feature, even if the standard NFS protocols do support that feature, +that usually means NFSD cannot provide that feature without +substantial development work in other areas of the kernel. + +Specificity +~~~~~~~~~~~ +Feature requests can come from anywhere, and thus can often be +nebulous. A requester might not understand what a "use case" or +"user story" is. These descriptive paradigms are often used by +developers and architects to understand what is required of a +design, but are terms of art in the software trade, not used in +the everyday world. + +In order to prevent contributors and maintainers from becoming +overwhelmed, we won't be afraid of saying "no" politely to +underspecified requests. + +Community roles and their authority +----------------------------------- +The purpose of Linux subsystem communities is to provide expertise +and active stewardship of a narrow set of source files in the Linux +kernel. This can include managing user space tooling as well. + +To contextualize the structure of the Linux NFS community that +is responsible for stewardship of the NFS server code base, we +define the community roles here. + +- **Contributor** : Anyone who submits a code change, bug fix, + recommendation, documentation fix, and so on. A contributor can + submit regularly or infrequently. + +- **Outside Contributor** : A contributor who is not a regular actor + in the Linux NFS community. This can mean someone who contributes + to other parts of the kernel, or someone who just noticed a + misspelling in a comment and sent a patch. + +- **Reviewer** : Someone who is named in the MAINTAINERS file as a + reviewer is an area expert who can request changes to contributed + code, and expects that contributors will address the request. + +- **External Reviewer** : Someone who is not named in the + MAINTAINERS file as a reviewer, but who is an area expert. + Examples include Linux kernel contributors with networking, + security, or persistent storage expertise, or developers who + contribute primarily to other NFS implementations. + +One or more people will take on the following roles. These people +are often generically referred to as "maintainers", and are +identified in the MAINTAINERS file with the "M:" tag under the NFSD +subsystem. + +- **Upstream Release Manager** : This role is responsible for + curating contributions into a branch, reviewing test results, and + then sending a pull request during merge windows. There is a + trust relationship between the release manager and Linus. + +- **Bug Triager** : Someone who is a first responder to bug reports + submitted to the linux-nfs mailing list or bug trackers, and helps + troubleshoot and identify next steps. + +- **Security Lead** : The security lead handles contacts from the + security community to resolve immediate issues, as well as dealing + with long-term security issues such as supply chain concerns. For + upstream, that's usually whether contributions violate licensing + or other intellectual property agreements. + +- **Testing Lead** : The testing lead builds and runs the test + infrastructure for the subsystem. The testing lead may ask for + patches to be dropped because of ongoing high defect rates. + +- **LTS Maintainer** : The LTS maintainer is responsible for managing + the Fixes: and Cc: stable annotations on patches, and seeing that + patches that cannot be automatically applied to LTS kernels get + proper manual backports as necessary. + +- **Community Manager** : This umpire role can be asked to call balls + and strikes during conflicts, but is also responsible for ensuring + the health of the relationships within the community and for + facilitating discussions on long-term topics such as how to manage + growing technical debt. diff --git a/Documentation/filesystems/porting.rst b/Documentation/filesystems/porting.rst index 7233b04668fcce..3397937ed838e5 100644 --- a/Documentation/filesystems/porting.rst +++ b/Documentation/filesystems/porting.rst @@ -211,7 +211,7 @@ test and set for you. e.g.:: inode = iget_locked(sb, ino); - if (inode->i_state & I_NEW) { + if (inode_state_read_once(inode) & I_NEW) { err = read_inode_from_disk(inode); if (err < 0) { iget_failed(inode); @@ -1286,6 +1286,11 @@ The vm_area_desc provides the minimum required information for a filesystem to initialise state upon memory mapping of a file-backed region, and output parameters for the file system to set this state. +In nearly all cases, this is all that is required for a filesystem. However, if +a filesystem needs to perform an operation such a pre-population of page tables, +then that action can be specified in the vm_area_desc->action field, which can +be configured using the mmap_action_*() helpers. + --- **mandatory** @@ -1309,3 +1314,23 @@ a different length, use vfs_parse_fs_qstr(fc, key, &QSTR_LEN(value, len)) instead. + +--- + +**mandatory** + +vfs_mkdir() now returns a dentry - the one returned by ->mkdir(). If +that dentry is different from the dentry passed in, including if it is +an IS_ERR() dentry pointer, the original dentry is dput(). + +When vfs_mkdir() returns an error, and so both dputs() the original +dentry and doesn't provide a replacement, it also unlocks the parent. +Consequently the return value from vfs_mkdir() can be passed to +end_creating() and the parent will be unlocked precisely when necessary. + +--- + +**mandatory** + +kill_litter_super() is gone; convert to DCACHE_PERSISTENT use (as all +in-tree filesystems have done). diff --git a/Documentation/filesystems/proc.rst b/Documentation/filesystems/proc.rst index 0b86a8022fa1ec..8256e857e2d747 100644 --- a/Documentation/filesystems/proc.rst +++ b/Documentation/filesystems/proc.rst @@ -553,7 +553,7 @@ otherwise. kernel flags associated with the particular virtual memory area in two letter encoded manner. The codes are the following: - == ======================================= + == ============================================================= rd readable wr writeable ex executable @@ -591,7 +591,8 @@ encoded manner. The codes are the following: sl sealed lf lock on fault pages dp always lazily freeable mapping - == ======================================= + gu maybe contains guard regions (if not set, definitely doesn't) + == ============================================================= Note that there is no guarantee that every flag and associated mnemonic will be present in all further kernel releases. Things get changed, the flags may diff --git a/Documentation/filesystems/ramfs-rootfs-initramfs.rst b/Documentation/filesystems/ramfs-rootfs-initramfs.rst index fa4f81099cb448..a9d271e171c39e 100644 --- a/Documentation/filesystems/ramfs-rootfs-initramfs.rst +++ b/Documentation/filesystems/ramfs-rootfs-initramfs.rst @@ -290,11 +290,11 @@ Why cpio rather than tar? This decision was made back in December, 2001. The discussion started here: - http://www.uwsg.iu.edu/hypermail/linux/kernel/0112.2/1538.html +- https://lore.kernel.org/lkml/a03cke$640$1@cesium.transmeta.com/ And spawned a second thread (specifically on tar vs cpio), starting here: - http://www.uwsg.iu.edu/hypermail/linux/kernel/0112.2/1587.html +- https://lore.kernel.org/lkml/3C25A06D.7030408@zytor.com/ The quick and dirty summary version (which is no substitute for reading the above threads) is: @@ -310,7 +310,7 @@ the above threads) is: either way about the archive format, and there are alternative tools, such as: - http://freecode.com/projects/afio + https://linux.die.net/man/1/afio 2) The cpio archive format chosen by the kernel is simpler and cleaner (and thus easier to create and parse) than any of the (literally dozens of) @@ -331,12 +331,12 @@ the above threads) is: 5) Al Viro made the decision (quote: "tar is ugly as hell and not going to be supported on the kernel side"): - http://www.uwsg.iu.edu/hypermail/linux/kernel/0112.2/1540.html + - https://lore.kernel.org/lkml/Pine.GSO.4.21.0112222109050.21702-100000@weyl.math.psu.edu/ explained his reasoning: - - http://www.uwsg.iu.edu/hypermail/linux/kernel/0112.2/1550.html - - http://www.uwsg.iu.edu/hypermail/linux/kernel/0112.2/1638.html + - https://lore.kernel.org/lkml/Pine.GSO.4.21.0112222240530.21702-100000@weyl.math.psu.edu/ + - https://lore.kernel.org/lkml/Pine.GSO.4.21.0112230849550.23300-100000@weyl.math.psu.edu/ and, most importantly, designed and implemented the initramfs code. diff --git a/Documentation/filesystems/resctrl.rst b/Documentation/filesystems/resctrl.rst index b7f35b07876a9f..8c8ce678148a52 100644 --- a/Documentation/filesystems/resctrl.rst +++ b/Documentation/filesystems/resctrl.rst @@ -17,17 +17,18 @@ AMD refers to this feature as AMD Platform Quality of Service(AMD QoS). This feature is enabled by the CONFIG_X86_CPU_RESCTRL and the x86 /proc/cpuinfo flag bits: -=============================================== ================================ -RDT (Resource Director Technology) Allocation "rdt_a" -CAT (Cache Allocation Technology) "cat_l3", "cat_l2" -CDP (Code and Data Prioritization) "cdp_l3", "cdp_l2" -CQM (Cache QoS Monitoring) "cqm_llc", "cqm_occup_llc" -MBM (Memory Bandwidth Monitoring) "cqm_mbm_total", "cqm_mbm_local" -MBA (Memory Bandwidth Allocation) "mba" -SMBA (Slow Memory Bandwidth Allocation) "" -BMEC (Bandwidth Monitoring Event Configuration) "" -ABMC (Assignable Bandwidth Monitoring Counters) "" -=============================================== ================================ +=============================================================== ================================ +RDT (Resource Director Technology) Allocation "rdt_a" +CAT (Cache Allocation Technology) "cat_l3", "cat_l2" +CDP (Code and Data Prioritization) "cdp_l3", "cdp_l2" +CQM (Cache QoS Monitoring) "cqm_llc", "cqm_occup_llc" +MBM (Memory Bandwidth Monitoring) "cqm_mbm_total", "cqm_mbm_local" +MBA (Memory Bandwidth Allocation) "mba" +SMBA (Slow Memory Bandwidth Allocation) "" +BMEC (Bandwidth Monitoring Event Configuration) "" +ABMC (Assignable Bandwidth Monitoring Counters) "" +SDCIAE (Smart Data Cache Injection Allocation Enforcement) "" +=============================================================== ================================ Historically, new features were made visible by default in /proc/cpuinfo. This resulted in the feature flags becoming hard to parse by humans. Adding a new @@ -72,6 +73,11 @@ The 'info' directory contains information about the enabled resources. Each resource has its own subdirectory. The subdirectory names reflect the resource names. +Most of the files in the resource's subdirectory are read-only, and +describe properties of the resource. Resources that support global +configuration options also include writable files that can be used +to modify those settings. + Each subdirectory contains the following files with respect to allocation: @@ -90,12 +96,19 @@ related to allocation: must be set when writing a mask. "shareable_bits": - Bitmask of shareable resource with other executing - entities (e.g. I/O). User can use this when - setting up exclusive cache partitions. Note that - some platforms support devices that have their - own settings for cache use which can over-ride - these bits. + Bitmask of shareable resource with other executing entities + (e.g. I/O). Applies to all instances of this resource. User + can use this when setting up exclusive cache partitions. + Note that some platforms support devices that have their + own settings for cache use which can over-ride these bits. + + When "io_alloc" is enabled, a portion of each cache instance can + be configured for shared use between hardware and software. + "bit_usage" should be used to see which portions of each cache + instance is configured for hardware use via "io_alloc" feature + because every cache instance can have its "io_alloc" bitmask + configured independently via "io_alloc_cbm". + "bit_usage": Annotated capacity bitmasks showing how all instances of the resource are used. The legend is: @@ -109,16 +122,16 @@ related to allocation: "H": Corresponding region is used by hardware only but available for software use. If a resource - has bits set in "shareable_bits" but not all - of these bits appear in the resource groups' - schematas then the bits appearing in - "shareable_bits" but no resource group will - be marked as "H". + has bits set in "shareable_bits" or "io_alloc_cbm" + but not all of these bits appear in the resource + groups' schemata then the bits appearing in + "shareable_bits" or "io_alloc_cbm" but no + resource group will be marked as "H". "X": Corresponding region is available for sharing and - used by hardware and software. These are the - bits that appear in "shareable_bits" as - well as a resource group's allocation. + used by hardware and software. These are the bits + that appear in "shareable_bits" or "io_alloc_cbm" + as well as a resource group's allocation. "S": Corresponding region is used by software and available for sharing. @@ -136,6 +149,77 @@ related to allocation: "1": Non-contiguous 1s value in CBM is supported. +"io_alloc": + "io_alloc" enables system software to configure the portion of + the cache allocated for I/O traffic. File may only exist if the + system supports this feature on some of its cache resources. + + "disabled": + Resource supports "io_alloc" but the feature is disabled. + Portions of cache used for allocation of I/O traffic cannot + be configured. + "enabled": + Portions of cache used for allocation of I/O traffic + can be configured using "io_alloc_cbm". + "not supported": + Support not available for this resource. + + The feature can be modified by writing to the interface, for example: + + To enable:: + + # echo 1 > /sys/fs/resctrl/info/L3/io_alloc + + To disable:: + + # echo 0 > /sys/fs/resctrl/info/L3/io_alloc + + The underlying implementation may reduce resources available to + general (CPU) cache allocation. See architecture specific notes + below. Depending on usage requirements the feature can be enabled + or disabled. + + On AMD systems, io_alloc feature is supported by the L3 Smart + Data Cache Injection Allocation Enforcement (SDCIAE). The CLOSID for + io_alloc is the highest CLOSID supported by the resource. When + io_alloc is enabled, the highest CLOSID is dedicated to io_alloc and + no longer available for general (CPU) cache allocation. When CDP is + enabled, io_alloc routes I/O traffic using the highest CLOSID allocated + for the instruction cache (CDP_CODE), making this CLOSID no longer + available for general (CPU) cache allocation for both the CDP_CODE + and CDP_DATA resources. + +"io_alloc_cbm": + Capacity bitmasks that describe the portions of cache instances to + which I/O traffic from supported I/O devices are routed when "io_alloc" + is enabled. + + CBMs are displayed in the following format: + + =;=;... + + Example:: + + # cat /sys/fs/resctrl/info/L3/io_alloc_cbm + 0=ffff;1=ffff + + CBMs can be configured by writing to the interface. + + Example:: + + # echo 1=ff > /sys/fs/resctrl/info/L3/io_alloc_cbm + # cat /sys/fs/resctrl/info/L3/io_alloc_cbm + 0=ffff;1=00ff + + # echo "0=ff;1=f" > /sys/fs/resctrl/info/L3/io_alloc_cbm + # cat /sys/fs/resctrl/info/L3/io_alloc_cbm + 0=00ff;1=000f + + When CDP is enabled "io_alloc_cbm" associated with the CDP_DATA and CDP_CODE + resources may reflect the same values. For example, values read from and + written to /sys/fs/resctrl/info/L3DATA/io_alloc_cbm may be reflected by + /sys/fs/resctrl/info/L3CODE/io_alloc_cbm and vice versa. + Memory bandwidth(MB) subdirectory contains the following files with respect to allocation: diff --git a/Documentation/filesystems/vfs.rst b/Documentation/filesystems/vfs.rst index 4f13b01e42eb5e..670ba66b60e496 100644 --- a/Documentation/filesystems/vfs.rst +++ b/Documentation/filesystems/vfs.rst @@ -1213,6 +1213,10 @@ otherwise noted. file-backed memory mapping, most notably establishing relevant private state and VMA callbacks. + If further action such as pre-population of page tables is required, + this can be specified by the vm_area_desc->action field and related + parameters. + Note that the file operations are implemented by the specific filesystem in which the inode resides. When opening a device node (character or block special) most filesystems will call special diff --git a/Documentation/filesystems/xfs/xfs-online-fsck-design.rst b/Documentation/filesystems/xfs/xfs-online-fsck-design.rst index 8cbcd3c2643430..3d9233f403dbb1 100644 --- a/Documentation/filesystems/xfs/xfs-online-fsck-design.rst +++ b/Documentation/filesystems/xfs/xfs-online-fsck-design.rst @@ -105,10 +105,8 @@ occur; this capability aids both strategies. TLDR; Show Me the Code! ----------------------- -Code is posted to the kernel.org git trees as follows: -`kernel changes `_, -`userspace changes `_, and -`QA test changes `_. +Kernel and userspace code has been fully merged as of October 2025. + Each kernel patchset adding an online repair function will use the same branch name across the kernel, xfsprogs, and fstests git repos. @@ -249,7 +247,7 @@ sharing and lock acquisition rules as the regular filesystem. This means that scrub cannot take *any* shortcuts to save time, because doing so could lead to concurrency problems. In other words, online fsck is not a complete replacement for offline fsck, and -a complete run of online fsck may take longer than online fsck. +a complete run of online fsck may take longer than offline fsck. However, both of these limitations are acceptable tradeoffs to satisfy the different motivations of online fsck, which are to **minimize system downtime** and to **increase predictability of operation**. @@ -764,12 +762,8 @@ allow the online fsck developers to compare online fsck against offline fsck, and they enable XFS developers to find deficiencies in the code base. Proposed patchsets include -`general fuzzer improvements -`_, `fuzzing baselines -`_, -and `improvements in fuzz testing comprehensiveness -`_. +`_. Stress Testing -------------- @@ -801,11 +795,6 @@ Success is defined by the ability to run all of these tests without observing any unexpected filesystem shutdowns due to corrupted metadata, kernel hang check warnings, or any other sort of mischief. -Proposed patchsets include `general stress testing -`_ -and the `evolution of existing per-function stress testing -`_. - 4. User Interface ================= @@ -886,10 +875,6 @@ apply as nice of a priority to IO and CPU scheduling as possible. This measure was taken to minimize delays in the rest of the filesystem. No such hardening has been performed for the cron job. -Proposed patchset: -`Enabling the xfs_scrub background service -`_. - Health Reporting ---------------- @@ -912,13 +897,6 @@ notifications and initiate a repair? *Answer*: These questions remain unanswered, but should be a part of the conversation with early adopters and potential downstream users of XFS. -Proposed patchsets include -`wiring up health reports to correction returns -`_ -and -`preservation of sickness info during memory reclaim -`_. - 5. Kernel Algorithms and Data Structures ======================================== @@ -1310,21 +1288,6 @@ Space allocation records are cross-referenced as follows: are there the same number of reverse mapping records for each block as the reference count record claims? -Proposed patchsets are the series to find gaps in -`refcount btree -`_, -`inode btree -`_, and -`rmap btree -`_ records; -to find -`mergeable records -`_; -and to -`improve cross referencing with rmap -`_ -before starting a repair. - Checking Extended Attributes ```````````````````````````` @@ -1756,10 +1719,6 @@ For scrub, the drain works as follows: To avoid polling in step 4, the drain provides a waitqueue for scrub threads to be woken up whenever the intent count drops to zero. -The proposed patchset is the -`scrub intent drain series -`_. - .. _jump_labels: Static Keys (aka Jump Label Patching) @@ -2036,10 +1995,6 @@ The ``xfarray_store_anywhere`` function is used to insert a record in any null record slot in the bag; and the ``xfarray_unset`` function removes a record from the bag. -The proposed patchset is the -`big in-memory array -`_. - Iterating Array Elements ^^^^^^^^^^^^^^^^^^^^^^^^ @@ -2172,10 +2127,6 @@ However, it should be noted that these repair functions only use blob storage to cache a small number of entries before adding them to a temporary ondisk file, which is why compaction is not required. -The proposed patchset is at the start of the -`extended attribute repair -`_ series. - .. _xfbtree: In-Memory B+Trees @@ -2214,11 +2165,6 @@ xfiles enables reuse of the entire btree library. Btrees built atop an xfile are collectively known as ``xfbtrees``. The next few sections describe how they actually work. -The proposed patchset is the -`in-memory btree -`_ -series. - Using xfiles as a Buffer Cache Target ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -2459,14 +2405,6 @@ This enables the log to release the old EFI to keep the log moving forwards. EFIs have a role to play during the commit and reaping phases; please see the next section and the section about :ref:`reaping` for more details. -Proposed patchsets are the -`bitmap rework -`_ -and the -`preparation for bulk loading btrees -`_. - - Writing the New Tree ```````````````````` @@ -2623,11 +2561,6 @@ The number of records for the inode btree is the number of xfarray records, but the record count for the free inode btree has to be computed as inode chunk records are stored in the xfarray. -The proposed patchset is the -`AG btree repair -`_ -series. - Case Study: Rebuilding the Space Reference Counts ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -2716,11 +2649,6 @@ Reverse mappings are added to the bag using ``xfarray_store_anywhere`` and removed via ``xfarray_unset``. Bag members are examined through ``xfarray_iter`` loops. -The proposed patchset is the -`AG btree repair -`_ -series. - Case Study: Rebuilding File Fork Mapping Indices ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -2757,11 +2685,6 @@ EXTENTS format instead of BMBT, which may require a conversion. Third, the incore extent map must be reloaded carefully to avoid disturbing any delayed allocation extents. -The proposed patchset is the -`file mapping repair -`_ -series. - .. _reaping: Reaping Old Metadata Blocks @@ -2843,11 +2766,6 @@ blocks. As stated earlier, online repair functions use very large transactions to minimize the chances of this occurring. -The proposed patchset is the -`preparation for bulk loading btrees -`_ -series. - Case Study: Reaping After a Regular Btree Repair ```````````````````````````````````````````````` @@ -2943,11 +2861,6 @@ When the walk is complete, the bitmap disunion operation ``(ag_owner_bitmap & btrees. These blocks can then be reaped using the methods outlined above. -The proposed patchset is the -`AG btree repair -`_ -series. - .. _rmap_reap: Case Study: Reaping After Repairing Reverse Mapping Btrees @@ -2972,11 +2885,6 @@ methods outlined above. The rest of the process of rebuildng the reverse mapping btree is discussed in a separate :ref:`case study`. -The proposed patchset is the -`AG btree repair -`_ -series. - Case Study: Rebuilding the AGFL ``````````````````````````````` @@ -3024,11 +2932,6 @@ more complicated, because computing the correct value requires traversing the forks, or if that fails, leaving the fields invalid and waiting for the fork fsck functions to run. -The proposed patchset is the -`inode -`_ -repair series. - Quota Record Repairs -------------------- @@ -3045,11 +2948,6 @@ checking are obviously bad limits and timer values. Quota usage counters are checked, repaired, and discussed separately in the section about :ref:`live quotacheck `. -The proposed patchset is the -`quota -`_ -repair series. - .. _fscounters: Freezing to Fix Summary Counters @@ -3145,11 +3043,6 @@ long enough to check and correct the summary counters. | This bug was fixed in Linux 5.17. | +--------------------------------------------------------------------------+ -The proposed patchset is the -`summary counter cleanup -`_ -series. - Full Filesystem Scans --------------------- @@ -3277,15 +3170,6 @@ Second, if the incore inode is stuck in some intermediate state, the scan coordinator must release the AGI and push the main filesystem to get the inode back into a loadable state. -The proposed patches are the -`inode scanner -`_ -series. -The first user of the new functionality is the -`online quotacheck -`_ -series. - Inode Management ```````````````` @@ -3381,12 +3265,6 @@ To capture these nuances, the online fsck code has a separate ``xchk_irele`` function to set or clear the ``DONTCACHE`` flag to get the required release behavior. -Proposed patchsets include fixing -`scrub iget usage -`_ and -`dir iget usage -`_. - .. _ilocking: Locking Inodes @@ -3443,11 +3321,6 @@ If the dotdot entry changes while the directory is unlocked, then a move or rename operation must have changed the child's parentage, and the scan can exit early. -The proposed patchset is the -`directory repair -`_ -series. - .. _fshooks: Filesystem Hooks @@ -3594,11 +3467,6 @@ The inode scan APIs are pretty simple: - ``xchk_iscan_teardown`` to finish the scan -This functionality is also a part of the -`inode scanner -`_ -series. - .. _quotacheck: Case Study: Quota Counter Checking @@ -3686,11 +3554,6 @@ needing to hold any locks for a long duration. If repairs are desired, the real and shadow dquots are locked and their resource counts are set to the values in the shadow dquot. -The proposed patchset is the -`online quotacheck -`_ -series. - .. _nlinks: Case Study: File Link Count Checking @@ -3744,11 +3607,6 @@ shadow information. If no parents are found, the file must be :ref:`reparented ` to the orphanage to prevent the file from being lost forever. -The proposed patchset is the -`file link count repair -`_ -series. - .. _rmap_repair: Case Study: Rebuilding Reverse Mapping Records @@ -3828,11 +3686,6 @@ scan for reverse mapping records. 12. Free the xfbtree now that it not needed. -The proposed patchset is the -`rmap repair -`_ -series. - Staging Repairs with Temporary Files on Disk -------------------------------------------- @@ -3971,11 +3824,6 @@ Once a good copy of a data file has been constructed in a temporary file, it must be conveyed to the file being repaired, which is the topic of the next section. -The proposed patches are in the -`repair temporary files -`_ -series. - Logged File Content Exchanges ----------------------------- @@ -4025,11 +3873,6 @@ The new ``XFS_SB_FEAT_INCOMPAT_EXCHRANGE`` incompatible feature flag in the superblock protects these new log item records from being replayed on old kernels. -The proposed patchset is the -`file contents exchange -`_ -series. - +--------------------------------------------------------------------------+ | **Sidebar: Using Log-Incompatible Feature Flags** | +--------------------------------------------------------------------------+ @@ -4323,11 +4166,6 @@ To repair the summary file, write the xfile contents into the temporary file and use atomic mapping exchange to commit the new contents. The temporary file is then reaped. -The proposed patchset is the -`realtime summary repair -`_ -series. - Case Study: Salvaging Extended Attributes ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -4369,11 +4207,6 @@ Salvaging extended attributes is done as follows: 4. Reap the temporary file. -The proposed patchset is the -`extended attribute repair -`_ -series. - Fixing Directories ------------------ @@ -4448,11 +4281,6 @@ Unfortunately, the current dentry cache design doesn't provide a means to walk every child dentry of a specific directory, which makes this a hard problem. There is no known solution. -The proposed patchset is the -`directory repair -`_ -series. - Parent Pointers ``````````````` @@ -4612,11 +4440,6 @@ a :ref:`directory entry live update hook ` as follows: 7. Reap the temporary directory. -The proposed patchset is the -`parent pointers directory repair -`_ -series. - Case Study: Repairing Parent Pointers ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -4662,11 +4485,6 @@ directory reconstruction: 8. Reap the temporary file. -The proposed patchset is the -`parent pointers repair -`_ -series. - Digression: Offline Checking of Parent Pointers ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -4755,11 +4573,6 @@ connectivity checks: 4. Move on to examining link counts, as we do today. -The proposed patchset is the -`offline parent pointers repair -`_ -series. - Rebuilding directories from parent pointers in offline repair would be very challenging because xfs_repair currently uses two single-pass scans of the filesystem during phases 3 and 4 to decide which files are corrupt enough to be @@ -4903,12 +4716,6 @@ Repairing the directory tree works as follows: 6. If the subdirectory has zero paths, attach it to the lost and found. -The proposed patches are in the -`directory tree repair -`_ -series. - - .. _orphanage: The Orphanage @@ -4973,11 +4780,6 @@ Orphaned files are adopted by the orphanage as follows: 7. If a runtime error happens, call ``xrep_adoption_cancel`` to release all resources. -The proposed patches are in the -`orphanage adoption -`_ -series. - 6. Userspace Algorithms and Data Structures =========================================== @@ -5091,14 +4893,6 @@ first workqueue's workers until the backlog eases. This doesn't completely solve the balancing problem, but reduces it enough to move on to more pressing issues. -The proposed patchsets are the scrub -`performance tweaks -`_ -and the -`inode scan rebalance -`_ -series. - .. _scrubrepair: Scheduling Repairs @@ -5179,20 +4973,6 @@ immediately. Corrupt file data blocks reported by phase 6 cannot be recovered by the filesystem. -The proposed patchsets are the -`repair warning improvements -`_, -refactoring of the -`repair data dependency -`_ -and -`object tracking -`_, -and the -`repair scheduling -`_ -improvement series. - Checking Names for Confusable Unicode Sequences ----------------------------------------------- @@ -5372,6 +5152,8 @@ The extra flexibility enables several new use cases: This emulates an atomic device write in software, and can support arbitrary scattered writes. +(This functionality was merged into mainline as of 2025) + Vectorized Scrub ---------------- @@ -5393,13 +5175,7 @@ It is hoped that ``io_uring`` will pick up enough of this functionality that online fsck can use that instead of adding a separate vectored scrub system call to XFS. -The relevant patchsets are the -`kernel vectorized scrub -`_ -and -`userspace vectorized scrub -`_ -series. +(This functionality was merged into mainline as of 2025) Quality of Service Targets for Scrub ------------------------------------ diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst index 5139705089f200..781129f78b06b8 100644 --- a/Documentation/gpu/drm-kms-helpers.rst +++ b/Documentation/gpu/drm-kms-helpers.rst @@ -92,6 +92,18 @@ GEM Atomic Helper Reference .. kernel-doc:: drivers/gpu/drm/drm_gem_atomic_helper.c :export: +VBLANK Helper Reference +----------------------- + +.. kernel-doc:: drivers/gpu/drm/drm_vblank_helper.c + :doc: overview + +.. kernel-doc:: include/drm/drm_vblank_helper.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/drm_vblank_helper.c + :export: + Simple KMS Helper Reference =========================== diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst index abfe220764e1ed..2292e65f044c3b 100644 --- a/Documentation/gpu/drm-kms.rst +++ b/Documentation/gpu/drm-kms.rst @@ -413,6 +413,21 @@ Plane Panic Functions Reference .. kernel-doc:: drivers/gpu/drm/drm_panic.c :export: +Colorop Abstraction +=================== + +.. kernel-doc:: drivers/gpu/drm/drm_colorop.c + :doc: overview + +Colorop Functions Reference +--------------------------- + +.. kernel-doc:: include/drm/drm_colorop.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/drm_colorop.c + :export: + Display Modes Function Reference ================================ diff --git a/Documentation/gpu/nova/core/todo.rst b/Documentation/gpu/nova/core/todo.rst index 0972cb905f7ae6..35cc7c31d4239a 100644 --- a/Documentation/gpu/nova/core/todo.rst +++ b/Documentation/gpu/nova/core/todo.rst @@ -44,25 +44,6 @@ automatically generates the corresponding mappings between a value and a number. | Complexity: Beginner | Link: https://docs.rs/num/latest/num/trait.FromPrimitive.html -Conversion from byte slices for types implementing FromBytes [TRSM] -------------------------------------------------------------------- - -We retrieve several structures from byte streams coming from the BIOS or loaded -firmware. At the moment converting the bytes slice into the proper type require -an inelegant `unsafe` operation; this will go away once `FromBytes` implements -a proper `from_bytes` method. - -| Complexity: Beginner - -CoherentAllocation improvements [COHA] --------------------------------------- - -`CoherentAllocation` needs a safe way to write into the allocation, and to -obtain slices within the allocation. - -| Complexity: Beginner -| Contact: Abdiel Janulgue - Generic register abstraction [REGA] ----------------------------------- @@ -153,17 +134,6 @@ A `num` core kernel module is being designed to provide these operations. | Complexity: Intermediate | Contact: Alexandre Courbot -Delay / Sleep abstractions [DLAY] ---------------------------------- - -Rust abstractions for the kernel's delay() and sleep() functions. - -FUJITA Tomonori plans to work on abstractions for read_poll_timeout_atomic() -(and friends) [1]. - -| Complexity: Beginner -| Link: https://lore.kernel.org/netdev/20250228.080550.354359820929821928.fujita.tomonori@gmail.com/ [1] - IRQ abstractions ---------------- diff --git a/Documentation/gpu/rfc/color_pipeline.rst b/Documentation/gpu/rfc/color_pipeline.rst new file mode 100644 index 00000000000000..cd1cc2d0f9887d --- /dev/null +++ b/Documentation/gpu/rfc/color_pipeline.rst @@ -0,0 +1,378 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================== +Linux Color Pipeline API +======================== + +What problem are we solving? +============================ + +We would like to support pre-, and post-blending complex color +transformations in display controller hardware in order to allow for +HW-supported HDR use-cases, as well as to provide support to +color-managed applications, such as video or image editors. + +It is possible to support an HDR output on HW supporting the Colorspace +and HDR Metadata drm_connector properties, but that requires the +compositor or application to render and compose the content into one +final buffer intended for display. Doing so is costly. + +Most modern display HW offers various 1D LUTs, 3D LUTs, matrices, and other +operations to support color transformations. These operations are often +implemented in fixed-function HW and therefore much more power efficient than +performing similar operations via shaders or CPU. + +We would like to make use of this HW functionality to support complex color +transformations with no, or minimal CPU or shader load. The switch between HW +fixed-function blocks and shaders/CPU must be seamless with no visible +difference when fallback to shaders/CPU is neceesary at any time. + + +How are other OSes solving this problem? +======================================== + +The most widely supported use-cases regard HDR content, whether video or +gaming. + +Most OSes will specify the source content format (color gamut, encoding transfer +function, and other metadata, such as max and average light levels) to a driver. +Drivers will then program their fixed-function HW accordingly to map from a +source content buffer's space to a display's space. + +When fixed-function HW is not available the compositor will assemble a shader to +ask the GPU to perform the transformation from the source content format to the +display's format. + +A compositor's mapping function and a driver's mapping function are usually +entirely separate concepts. On OSes where a HW vendor has no insight into +closed-source compositor code such a vendor will tune their color management +code to visually match the compositor's. On other OSes, where both mapping +functions are open to an implementer they will ensure both mappings match. + +This results in mapping algorithm lock-in, meaning that no-one alone can +experiment with or introduce new mapping algorithms and achieve +consistent results regardless of which implementation path is taken. + +Why is Linux different? +======================= + +Unlike other OSes, where there is one compositor for one or more drivers, on +Linux we have a many-to-many relationship. Many compositors; many drivers. +In addition each compositor vendor or community has their own view of how +color management should be done. This is what makes Linux so beautiful. + +This means that a HW vendor can now no longer tune their driver to one +compositor, as tuning it to one could make it look fairly different from +another compositor's color mapping. + +We need a better solution. + + +Descriptive API +=============== + +An API that describes the source and destination colorspaces is a descriptive +API. It describes the input and output color spaces but does not describe +how precisely they should be mapped. Such a mapping includes many minute +design decision that can greatly affect the look of the final result. + +It is not feasible to describe such mapping with enough detail to ensure the +same result from each implementation. In fact, these mappings are a very active +research area. + + +Prescriptive API +================ + +A prescriptive API describes not the source and destination colorspaces. It +instead prescribes a recipe for how to manipulate pixel values to arrive at the +desired outcome. + +This recipe is generally an ordered list of straight-forward operations, +with clear mathematical definitions, such as 1D LUTs, 3D LUTs, matrices, +or other operations that can be described in a precise manner. + + +The Color Pipeline API +====================== + +HW color management pipelines can significantly differ between HW +vendors in terms of availability, ordering, and capabilities of HW +blocks. This makes a common definition of color management blocks and +their ordering nigh impossible. Instead we are defining an API that +allows user space to discover the HW capabilities in a generic manner, +agnostic of specific drivers and hardware. + + +drm_colorop Object +================== + +To support the definition of color pipelines we define the DRM core +object type drm_colorop. Individual drm_colorop objects will be chained +via the NEXT property of a drm_colorop to constitute a color pipeline. +Each drm_colorop object is unique, i.e., even if multiple color +pipelines have the same operation they won't share the same drm_colorop +object to describe that operation. + +Note that drivers are not expected to map drm_colorop objects statically +to specific HW blocks. The mapping of drm_colorop objects is entirely a +driver-internal detail and can be as dynamic or static as a driver needs +it to be. See more in the Driver Implementation Guide section below. + +Each drm_colorop has three core properties: + +TYPE: An enumeration property, defining the type of transformation, such as +* enumerated curve +* custom (uniform) 1D LUT +* 3x3 matrix +* 3x4 matrix +* 3D LUT +* etc. + +Depending on the type of transformation other properties will describe +more details. + +BYPASS: A boolean property that can be used to easily put a block into +bypass mode. The BYPASS property is not mandatory for a colorop, as long +as the entire pipeline can get bypassed by setting the COLOR_PIPELINE on +a plane to '0'. + +NEXT: The ID of the next drm_colorop in a color pipeline, or 0 if this +drm_colorop is the last in the chain. + +An example of a drm_colorop object might look like one of these:: + + /* 1D enumerated curve */ + Color operation 42 + ├─ "TYPE": immutable enum {1D enumerated curve, 1D LUT, 3x3 matrix, 3x4 matrix, 3D LUT, etc.} = 1D enumerated curve + ├─ "BYPASS": bool {true, false} + ├─ "CURVE_1D_TYPE": enum {sRGB EOTF, sRGB inverse EOTF, PQ EOTF, PQ inverse EOTF, …} + └─ "NEXT": immutable color operation ID = 43 + + /* custom 4k entry 1D LUT */ + Color operation 52 + ├─ "TYPE": immutable enum {1D enumerated curve, 1D LUT, 3x3 matrix, 3x4 matrix, 3D LUT, etc.} = 1D LUT + ├─ "BYPASS": bool {true, false} + ├─ "SIZE": immutable range = 4096 + ├─ "DATA": blob + └─ "NEXT": immutable color operation ID = 0 + + /* 17^3 3D LUT */ + Color operation 72 + ├─ "TYPE": immutable enum {1D enumerated curve, 1D LUT, 3x3 matrix, 3x4 matrix, 3D LUT, etc.} = 3D LUT + ├─ "BYPASS": bool {true, false} + ├─ "SIZE": immutable range = 17 + ├─ "DATA": blob + └─ "NEXT": immutable color operation ID = 73 + +drm_colorop extensibility +------------------------- + +Unlike existing DRM core objects, like &drm_plane, drm_colorop is not +extensible. This simplifies implementations and keeps all functionality +for managing &drm_colorop objects in the DRM core. + +If there is a need one may introduce a simple &drm_colorop_funcs +function table in the future, for example to support an IN_FORMATS +property on a &drm_colorop. + +If a driver requires the ability to create a driver-specific colorop +object they will need to add &drm_colorop func table support with +support for the usual functions, like destroy, atomic_duplicate_state, +and atomic_destroy_state. + + +COLOR_PIPELINE Plane Property +============================= + +Color Pipelines are created by a driver and advertised via a new +COLOR_PIPELINE enum property on each plane. Values of the property +always include object id 0, which is the default and means all color +processing is disabled. Additional values will be the object IDs of the +first drm_colorop in a pipeline. A driver can create and advertise none, +one, or more possible color pipelines. A DRM client will select a color +pipeline by setting the COLOR PIPELINE to the respective value. + +NOTE: Many DRM clients will set enumeration properties via the string +value, often hard-coding it. Since this enumeration is generated based +on the colorop object IDs it is important to perform the Color Pipeline +Discovery, described below, instead of hard-coding color pipeline +assignment. Drivers might generate the enum strings dynamically. +Hard-coded strings might only work for specific drivers on a specific +pieces of HW. Color Pipeline Discovery can work universally, as long as +drivers implement the required color operations. + +The COLOR_PIPELINE property is only exposed when the +DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE is set. Drivers shall ignore any +existing pre-blend color operations when this cap is set, such as +COLOR_RANGE and COLOR_ENCODING. If drivers want to support COLOR_RANGE +or COLOR_ENCODING functionality when the color pipeline client cap is +set, they are expected to expose colorops in the pipeline to allow for +the appropriate color transformation. + +Setting of the COLOR_PIPELINE plane property or drm_colorop properties +is only allowed for userspace that sets this client cap. + +An example of a COLOR_PIPELINE property on a plane might look like this:: + + Plane 10 + ├─ "TYPE": immutable enum {Overlay, Primary, Cursor} = Primary + ├─ … + └─ "COLOR_PIPELINE": enum {0, 42, 52} = 0 + + +Color Pipeline Discovery +======================== + +A DRM client wanting color management on a drm_plane will: + +1. Get the COLOR_PIPELINE property of the plane +2. iterate all COLOR_PIPELINE enum values +3. for each enum value walk the color pipeline (via the NEXT pointers) + and see if the available color operations are suitable for the + desired color management operations + +If userspace encounters an unknown or unsuitable color operation during +discovery it does not need to reject the entire color pipeline outright, +as long as the unknown or unsuitable colorop has a "BYPASS" property. +Drivers will ensure that a bypassed block does not have any effect. + +An example of chained properties to define an AMD pre-blending color +pipeline might look like this:: + + Plane 10 + ├─ "TYPE" (immutable) = Primary + └─ "COLOR_PIPELINE": enum {0, 44} = 0 + + Color operation 44 + ├─ "TYPE" (immutable) = 1D enumerated curve + ├─ "BYPASS": bool + ├─ "CURVE_1D_TYPE": enum {sRGB EOTF, PQ EOTF} = sRGB EOTF + └─ "NEXT" (immutable) = 45 + + Color operation 45 + ├─ "TYPE" (immutable) = 3x4 Matrix + ├─ "BYPASS": bool + ├─ "DATA": blob + └─ "NEXT" (immutable) = 46 + + Color operation 46 + ├─ "TYPE" (immutable) = 1D enumerated curve + ├─ "BYPASS": bool + ├─ "CURVE_1D_TYPE": enum {sRGB Inverse EOTF, PQ Inverse EOTF} = sRGB EOTF + └─ "NEXT" (immutable) = 47 + + Color operation 47 + ├─ "TYPE" (immutable) = 1D LUT + ├─ "SIZE": immutable range = 4096 + ├─ "DATA": blob + └─ "NEXT" (immutable) = 48 + + Color operation 48 + ├─ "TYPE" (immutable) = 3D LUT + ├─ "DATA": blob + └─ "NEXT" (immutable) = 49 + + Color operation 49 + ├─ "TYPE" (immutable) = 1D enumerated curve + ├─ "BYPASS": bool + ├─ "CURVE_1D_TYPE": enum {sRGB EOTF, PQ EOTF} = sRGB EOTF + └─ "NEXT" (immutable) = 0 + + +Color Pipeline Programming +========================== + +Once a DRM client has found a suitable pipeline it will: + +1. Set the COLOR_PIPELINE enum value to the one pointing at the first + drm_colorop object of the desired pipeline +2. Set the properties for all drm_colorop objects in the pipeline to the + desired values, setting BYPASS to true for unused drm_colorop blocks, + and false for enabled drm_colorop blocks +3. Perform (TEST_ONLY or not) atomic commit with all the other KMS + states it wishes to change + +To configure the pipeline for an HDR10 PQ plane and blending in linear +space, a compositor might perform an atomic commit with the following +property values:: + + Plane 10 + └─ "COLOR_PIPELINE" = 42 + + Color operation 42 + └─ "BYPASS" = true + + Color operation 44 + └─ "BYPASS" = true + + Color operation 45 + └─ "BYPASS" = true + + Color operation 46 + └─ "BYPASS" = true + + Color operation 47 + ├─ "DATA" = Gamut mapping + tone mapping + night mode + └─ "BYPASS" = false + + Color operation 48 + ├─ "CURVE_1D_TYPE" = PQ EOTF + └─ "BYPASS" = false + + +Driver Implementer's Guide +========================== + +What does this all mean for driver implementations? As noted above the +colorops can map to HW directly but don't need to do so. Here are some +suggestions on how to think about creating your color pipelines: + +- Try to expose pipelines that use already defined colorops, even if + your hardware pipeline is split differently. This allows existing + userspace to immediately take advantage of the hardware. + +- Additionally, try to expose your actual hardware blocks as colorops. + Define new colorop types where you believe it can offer significant + benefits if userspace learns to program them. + +- Avoid defining new colorops for compound operations with very narrow + scope. If you have a hardware block for a special operation that + cannot be split further, you can expose that as a new colorop type. + However, try to not define colorops for "use cases", especially if + they require you to combine multiple hardware blocks. + +- Design new colorops as prescriptive, not descriptive; by the + mathematical formula, not by the assumed input and output. + +A defined colorop type must be deterministic. The exact behavior of the +colorop must be documented entirely, whether via a mathematical formula +or some other description. Its operation can depend only on its +properties and input and nothing else, allowed error tolerance +notwithstanding. + + +Driver Forward/Backward Compatibility +===================================== + +As this is uAPI drivers can't regress color pipelines that have been +introduced for a given HW generation. New HW generations are free to +abandon color pipelines advertised for previous generations. +Nevertheless, it can be beneficial to carry support for existing color +pipelines forward as those will likely already have support in DRM +clients. + +Introducing new colorops to a pipeline is fine, as long as they can be +bypassed or are purely informational. DRM clients implementing support +for the pipeline can always skip unknown properties as long as they can +be confident that doing so will not cause unexpected results. + +If a new colorop doesn't fall into one of the above categories +(bypassable or informational) the modified pipeline would be unusable +for user space. In this case a new pipeline should be defined. + + +References +========== + +1. https://lore.kernel.org/dri-devel/QMers3awXvNCQlyhWdTtsPwkp5ie9bze_hD5nAccFW7a_RXlWjYB7MoUW_8CKLT2bSQwIXVi5H6VULYIxCdgvryZoAoJnC5lZgyK1QWn488=@emersion.fr/ \ No newline at end of file diff --git a/Documentation/gpu/rfc/index.rst b/Documentation/gpu/rfc/index.rst index 396e535377fbc5..ef19b0ba2a3ea4 100644 --- a/Documentation/gpu/rfc/index.rst +++ b/Documentation/gpu/rfc/index.rst @@ -35,3 +35,6 @@ host such documentation: .. toctree:: i915_vm_bind.rst + +.. toctree:: + color_pipeline.rst \ No newline at end of file diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst index b5f58b4274b1d3..9013ced318cb97 100644 --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -623,6 +623,43 @@ Contact: Thomas Zimmermann , Simona Vetter Level: Advanced +Implement a new DUMB_CREATE2 ioctl +---------------------------------- + +The current DUMB_CREATE ioctl is not well defined. Instead of a pixel and +framebuffer format, it only accepts a color mode of vague semantics. Assuming +a linear framebuffer, the color mode gives an idea of the supported pixel +format. But userspace effectively has to guess the correct values. It really +only works reliably with framebuffers in XRGB8888. Userspace has begun to +workaround these limitations by computing arbitrary format's buffer sizes and +calculating their sizes in terms of XRGB8888 pixels. + +One possible solution is a new ioctl DUMB_CREATE2. It should accept a DRM +format and a format modifier to resolve the color mode's ambiguity. As +framebuffers can be multi-planar, the new ioctl has to return the buffer size, +pitch and GEM handle for each individual color plane. + +In the first step, the new ioctl can be limited to the current features of +the existing DUMB_CREATE. Individual drivers can then be extended to support +multi-planar formats. Rockchip might require this and would be a good candidate. + +It might also be helpful to userspace to query information about the size of +a potential buffer, if allocated. Userspace would supply geometry and format; +the kernel would return minimal allocation sizes and scanline pitch. There is +interest to allocate that memory from another device and provide it to the +DRM driver (say via dma-buf). + +Another requested feature is the ability to allocate a buffer by size, without +format. Accelators use this for their buffer allocation and it could likely be +generalized. + +In addition to the kernel implementation, there must be user-space support +for the new ioctl. There's code in Mesa that might be able to use the new +call. + +Contact: Thomas Zimmermann + +Level: Advanced Better Testing ============== diff --git a/Documentation/gpu/vkms.rst b/Documentation/gpu/vkms.rst index 8a8b1002931f81..1e79e62a6bc4c4 100644 --- a/Documentation/gpu/vkms.rst +++ b/Documentation/gpu/vkms.rst @@ -51,6 +51,97 @@ To disable the driver, use :: sudo modprobe -r vkms +Configuring With Configfs +========================= + +It is possible to create and configure multiple VKMS instances via configfs. + +Start by mounting configfs and loading VKMS:: + + sudo mount -t configfs none /config + sudo modprobe vkms + +Once VKMS is loaded, ``/config/vkms`` is created automatically. Each directory +under ``/config/vkms`` represents a VKMS instance, create a new one:: + + sudo mkdir /config/vkms/my-vkms + +By default, the instance is disabled:: + + cat /config/vkms/my-vkms/enabled + 0 + +And directories are created for each configurable item of the display pipeline:: + + tree /config/vkms/my-vkms + ├── connectors + ├── crtcs + ├── enabled + ├── encoders + └── planes + +To add items to the display pipeline, create one or more directories under the +available paths. + +Start by creating one or more planes:: + + sudo mkdir /config/vkms/my-vkms/planes/plane0 + +Planes have 1 configurable attribute: + +- type: Plane type: 0 overlay, 1 primary, 2 cursor (same values as those + exposed by the "type" property of a plane) + +Continue by creating one or more CRTCs:: + + sudo mkdir /config/vkms/my-vkms/crtcs/crtc0 + +CRTCs have 1 configurable attribute: + +- writeback: Enable or disable writeback connector support by writing 1 or 0 + +Next, create one or more encoders:: + + sudo mkdir /config/vkms/my-vkms/encoders/encoder0 + +Last but not least, create one or more connectors:: + + sudo mkdir /config/vkms/my-vkms/connectors/connector0 + +Connectors have 1 configurable attribute: + +- status: Connection status: 1 connected, 2 disconnected, 3 unknown (same values + as those exposed by the "status" property of a connector) + +To finish the configuration, link the different pipeline items:: + + sudo ln -s /config/vkms/my-vkms/crtcs/crtc0 /config/vkms/my-vkms/planes/plane0/possible_crtcs + sudo ln -s /config/vkms/my-vkms/crtcs/crtc0 /config/vkms/my-vkms/encoders/encoder0/possible_crtcs + sudo ln -s /config/vkms/my-vkms/encoders/encoder0 /config/vkms/my-vkms/connectors/connector0/possible_encoders + +Since at least one primary plane is required, make sure to set the right type:: + + echo "1" | sudo tee /config/vkms/my-vkms/planes/plane0/type + +Once you are done configuring the VKMS instance, enable it:: + + echo "1" | sudo tee /config/vkms/my-vkms/enabled + +Finally, you can remove the VKMS instance disabling it:: + + echo "0" | sudo tee /config/vkms/my-vkms/enabled + +And removing the top level directory and its subdirectories:: + + sudo rm /config/vkms/my-vkms/planes/*/possible_crtcs/* + sudo rm /config/vkms/my-vkms/encoders/*/possible_crtcs/* + sudo rm /config/vkms/my-vkms/connectors/*/possible_encoders/* + sudo rmdir /config/vkms/my-vkms/planes/* + sudo rmdir /config/vkms/my-vkms/crtcs/* + sudo rmdir /config/vkms/my-vkms/encoders/* + sudo rmdir /config/vkms/my-vkms/connectors/* + sudo rmdir /config/vkms/my-vkms + Testing With IGT ================ @@ -68,26 +159,23 @@ To return to graphical mode, do:: sudo systemctl isolate graphical.target -Once you are in text only mode, you can run tests using the --device switch -or IGT_DEVICE variable to specify the device filter for the driver we want -to test. IGT_DEVICE can also be used with the run-test.sh script to run the +Once you are in text only mode, you can run tests using the IGT_FORCE_DRIVER +variable to specify the device filter for the driver we want to test. +IGT_FORCE_DRIVER can also be used with the run-tests.sh script to run the tests for a specific driver:: - sudo ./build/tests/ --device "sys:/sys/devices/platform/vkms" - sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./build/tests/ - sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./scripts/run-tests.sh -t + sudo IGT_FORCE_DRIVER="vkms" ./build/tests/ + sudo IGT_FORCE_DRIVER="vkms" ./scripts/run-tests.sh -t For example, to test the functionality of the writeback library, we can run the kms_writeback test:: - sudo ./build/tests/kms_writeback --device "sys:/sys/devices/platform/vkms" - sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./build/tests/kms_writeback - sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./scripts/run-tests.sh -t kms_writeback + sudo IGT_FORCE_DRIVER="vkms" ./build/tests/kms_writeback + sudo IGT_FORCE_DRIVER="vkms" ./scripts/run-tests.sh -t kms_writeback You can also run subtests if you do not want to run the entire test:: - sudo ./build/tests/kms_flip --run-subtest basic-plain-flip --device "sys:/sys/devices/platform/vkms" - sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./build/tests/kms_flip --run-subtest basic-plain-flip + sudo IGT_FORCE_DRIVER="vkms" ./build/tests/kms_flip --run-subtest basic-plain-flip Testing With KUnit ================== @@ -147,21 +235,14 @@ Runtime Configuration --------------------- We want to be able to reconfigure vkms instance without having to reload the -module. Use/Test-cases: +module through configfs. Use/Test-cases: - Hotplug/hotremove connectors on the fly (to be able to test DP MST handling of compositors). -- Configure planes/crtcs/connectors (we'd need some code to have more than 1 of - them first). - - Change output configuration: Plug/unplug screens, change EDID, allow changing the refresh rate. -The currently proposed solution is to expose vkms configuration through -configfs. All existing module options should be supported through configfs -too. - Writeback support ----------------- diff --git a/Documentation/gpu/xe/index.rst b/Documentation/gpu/xe/index.rst index 88b22fad880e7a..bc432c95d1a359 100644 --- a/Documentation/gpu/xe/index.rst +++ b/Documentation/gpu/xe/index.rst @@ -14,6 +14,7 @@ DG2, etc is provided to prototype the driver. xe_mm xe_map xe_migrate + xe_exec_queue xe_cs xe_pm xe_gt_freq diff --git a/Documentation/gpu/xe/xe_exec_queue.rst b/Documentation/gpu/xe/xe_exec_queue.rst new file mode 100644 index 00000000000000..6076569e311cd7 --- /dev/null +++ b/Documentation/gpu/xe/xe_exec_queue.rst @@ -0,0 +1,20 @@ +.. SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +=============== +Execution Queue +=============== + +.. kernel-doc:: drivers/gpu/drm/xe/xe_exec_queue.c + :doc: Execution Queue + +Internal API +============ + +.. kernel-doc:: drivers/gpu/drm/xe/xe_exec_queue_types.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/xe/xe_exec_queue.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/xe/xe_exec_queue.c + :internal: diff --git a/Documentation/gpu/xe/xe_gt_freq.rst b/Documentation/gpu/xe/xe_gt_freq.rst index c0811200e32755..182d6aabeee181 100644 --- a/Documentation/gpu/xe/xe_gt_freq.rst +++ b/Documentation/gpu/xe/xe_gt_freq.rst @@ -7,6 +7,9 @@ Xe GT Frequency Management .. kernel-doc:: drivers/gpu/drm/xe/xe_gt_freq.c :doc: Xe GT Frequency Management +.. kernel-doc:: drivers/gpu/drm/xe/xe_gt_throttle.c + :doc: Xe GT Throttle + Internal API ============ diff --git a/Documentation/hid/hid-alps.rst b/Documentation/hid/hid-alps.rst index 94382bb0ada4d8..4a22a357f00c02 100644 --- a/Documentation/hid/hid-alps.rst +++ b/Documentation/hid/hid-alps.rst @@ -69,6 +69,7 @@ To read/write to RAM, need to send a command to the device. The command format is as below. DataByte(SET_REPORT) +~~~~~~~~~~~~~~~~~~~~ ===== ====================== Byte1 Command Byte @@ -89,6 +90,7 @@ Value Byte is writing data when you send the write commands. When you read RAM, there is no meaning. DataByte(GET_REPORT) +~~~~~~~~~~~~~~~~~~~~ ===== ====================== Byte1 Response Byte @@ -104,8 +106,10 @@ Read value is stored in Value Byte. Packet Format +------------- + Touchpad data byte ------------------- +~~~~~~~~~~~~~~~~~~ ======= ======= ======= ======= ======= ======= ======= ======= ===== @@ -156,7 +160,7 @@ Zsn_6-0(7bit): StickPointer data byte ----------------------- +~~~~~~~~~~~~~~~~~~~~~~ ======= ======= ======= ======= ======= ======= ======= ======= ===== - b7 b6 b5 b4 b3 b2 b1 b0 diff --git a/Documentation/hwmon/aht10.rst b/Documentation/hwmon/aht10.rst index 213644b4ecba6e..7903b6434326d0 100644 --- a/Documentation/hwmon/aht10.rst +++ b/Documentation/hwmon/aht10.rst @@ -20,6 +20,14 @@ Supported chips: English: http://www.aosong.com/userfiles/files/media/Data%20Sheet%20AHT20.pdf + * Aosong DHT20 + + Prefix: 'dht20' + + Addresses scanned: None + + Datasheet: https://www.digikey.co.nz/en/htmldatasheets/production/9184855/0/0/1/101020932 + Author: Johannes Cornelis Draaijer @@ -33,7 +41,7 @@ The address of this i2c device may only be 0x38 Special Features ---------------- -AHT20 has additional CRC8 support which is sent as the last byte of the sensor +AHT20, DHT20 has additional CRC8 support which is sent as the last byte of the sensor values. Usage Notes diff --git a/Documentation/hwmon/asus_ec_sensors.rst b/Documentation/hwmon/asus_ec_sensors.rst index a5a58c00c32234..232885f24430d0 100644 --- a/Documentation/hwmon/asus_ec_sensors.rst +++ b/Documentation/hwmon/asus_ec_sensors.rst @@ -9,6 +9,7 @@ Supported boards: * PRIME X570-PRO * PRIME X670E-PRO WIFI * PRIME Z270-A + * Pro WS TRX50-SAGE WIFI * Pro WS X570-ACE * Pro WS WRX90E-SAGE SE * ProArt X570-CREATOR WIFI @@ -29,14 +30,17 @@ Supported boards: * ROG STRIX B550-I GAMING * ROG STRIX B650E-I GAMING WIFI * ROG STRIX B850-I GAMING WIFI + * ROG STRIX X470-I GAMING * ROG STRIX X570-E GAMING * ROG STRIX X570-E GAMING WIFI II * ROG STRIX X570-F GAMING * ROG STRIX X570-I GAMING * ROG STRIX X670E-E GAMING WIFI * ROG STRIX X670E-I GAMING WIFI + * ROG STRIX X870-F GAMING WIFI * ROG STRIX X870-I GAMING WIFI * ROG STRIX X870E-E GAMING WIFI + * ROG STRIX X870E-H GAMING WIFI7 * ROG STRIX Z390-F GAMING * ROG STRIX Z490-F GAMING * ROG STRIX Z690-A GAMING WIFI D4 diff --git a/Documentation/hwmon/ds1621.rst b/Documentation/hwmon/ds1621.rst index 552b37e9dd34de..d0808720aa07ca 100644 --- a/Documentation/hwmon/ds1621.rst +++ b/Documentation/hwmon/ds1621.rst @@ -9,7 +9,7 @@ Supported chips: Addresses scanned: none - Datasheet: Publicly available from www.maximintegrated.com + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/DS1621.pdf * Dallas Semiconductor DS1625 @@ -17,7 +17,7 @@ Supported chips: Addresses scanned: none - Datasheet: Publicly available from www.datasheetarchive.com + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/DS1620.pdf * Maxim Integrated DS1631 @@ -25,7 +25,7 @@ Supported chips: Addresses scanned: none - Datasheet: Publicly available from www.maximintegrated.com + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/DS1631-DS1731.pdf * Maxim Integrated DS1721 @@ -33,7 +33,7 @@ Supported chips: Addresses scanned: none - Datasheet: Publicly available from www.maximintegrated.com + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/DS1721.pdf * Maxim Integrated DS1731 @@ -41,7 +41,7 @@ Supported chips: Addresses scanned: none - Datasheet: Publicly available from www.maximintegrated.com + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/DS1631-DS1731.pdf Authors: - Christian W. Zuckschwerdt diff --git a/Documentation/hwmon/ds620.rst b/Documentation/hwmon/ds620.rst index 2d686b17b547a1..e2d915a988a249 100644 --- a/Documentation/hwmon/ds620.rst +++ b/Documentation/hwmon/ds620.rst @@ -7,9 +7,9 @@ Supported chips: Prefix: 'ds620' - Datasheet: Publicly available at the Dallas Semiconductor website + Datasheet: Publicly available at the Analog Devices website - http://www.dalsemi.com/ + https://www.analog.com/media/en/technical-documentation/data-sheets/DS620.pdf Authors: Roland Stigge diff --git a/Documentation/hwmon/g762.rst b/Documentation/hwmon/g762.rst index 0371b3365c48cf..f224552a2d3cc0 100644 --- a/Documentation/hwmon/g762.rst +++ b/Documentation/hwmon/g762.rst @@ -17,7 +17,7 @@ done via a userland daemon like fancontrol. Note that those entries do not provide ways to setup the specific hardware characteristics of the system (reference clock, pulses per fan revolution, ...); Those can be modified via devicetree bindings -documented in Documentation/devicetree/bindings/hwmon/g762.txt or +documented in Documentation/devicetree/bindings/hwmon/gmt,g762.yaml or using a specific platform_data structure in board initialization file (see include/linux/platform_data/g762.h). diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 51a5bdf75b0865..85d7a686883ec0 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -144,6 +144,7 @@ Hardware Monitoring Kernel Drivers ltc4261 ltc4282 ltc4286 + macsmc-hwmon max127 max15301 max16064 @@ -151,6 +152,7 @@ Hardware Monitoring Kernel Drivers max1619 max16601 max1668 + max17616 max197 max20730 max20751 @@ -177,6 +179,7 @@ Hardware Monitoring Kernel Drivers mp2869 mp2888 mp2891 + mp2925 mp29502 mp2975 mp2993 @@ -184,6 +187,7 @@ Hardware Monitoring Kernel Drivers mp5920 mp5990 mp9941 + mp9945 mpq8785 nct6683 nct6775 @@ -253,6 +257,7 @@ Hardware Monitoring Kernel Drivers tps40422 tps53679 tps546d24 + tsc1641 twl4030-madc-hwmon ucd9000 ucd9200 diff --git a/Documentation/hwmon/isl68137.rst b/Documentation/hwmon/isl68137.rst index 5bc029c98383d3..e77f582c285054 100644 --- a/Documentation/hwmon/isl68137.rst +++ b/Documentation/hwmon/isl68137.rst @@ -414,6 +414,16 @@ Supported chips: Publicly available (after August 2020 launch) at the Renesas website + * Renesas RAA229141 + + Prefix: 'raa229141' + + Addresses scanned: - + + Datasheet: + + Provided by Renesas upon request and NDA + Authors: - Maxim Sloyko - Robert Lippert diff --git a/Documentation/hwmon/jc42.rst b/Documentation/hwmon/jc42.rst index 19d10512f6c031..3736e63db2a872 100644 --- a/Documentation/hwmon/jc42.rst +++ b/Documentation/hwmon/jc42.rst @@ -33,7 +33,7 @@ Supported chips: Datasheets: - http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6604.pdf * Microchip MCP9804, MCP9805, MCP9808, MCP98242, MCP98243, MCP98244, MCP9843 diff --git a/Documentation/hwmon/lm75.rst b/Documentation/hwmon/lm75.rst index 908b3a9df06e82..4269da04508ef5 100644 --- a/Documentation/hwmon/lm75.rst +++ b/Documentation/hwmon/lm75.rst @@ -23,15 +23,17 @@ Supported chips: http://www.national.com/ - * Dallas Semiconductor (now Maxim) DS75, DS1775, DS7505 + * Dallas Semiconductor (now Analog Devices) DS75, DS1775, DS7505 Prefixes: 'ds75', 'ds1775', 'ds7505' Addresses scanned: none - Datasheet: Publicly available at the Maxim website + Datasheets: - https://www.maximintegrated.com/ + https://www.analog.com/media/en/technical-documentation/data-sheets/DS75.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/DS1775.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/DS7505.pdf * Maxim MAX6625, MAX6626, MAX31725, MAX31726 @@ -39,9 +41,10 @@ Supported chips: Addresses scanned: none - Datasheet: Publicly available at the Maxim website + Datasheets: - http://www.maxim-ic.com/ + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6625-MAX6626.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31725-MAX31726.pdf * Microchip (TelCom) TCN75 diff --git a/Documentation/hwmon/lm90.rst b/Documentation/hwmon/lm90.rst index 98452eed16d526..79c023521d39f7 100644 --- a/Documentation/hwmon/lm90.rst +++ b/Documentation/hwmon/lm90.rst @@ -9,7 +9,9 @@ Supported chips: Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - Datasheet: Publicly available at the National Semiconductor website + Datasheet: Publicly available at the TI website + + https://www.ti.com/lit/ds/symlink/lm84.pdf * National Semiconductor LM90 @@ -17,9 +19,9 @@ Supported chips: Addresses scanned: I2C 0x4c - Datasheet: Publicly available at the National Semiconductor website + Datasheet: Publicly available at the TI website - http://www.national.com/pf/LM/LM90.html + https://www.ti.com/lit/ds/symlink/lm90.pdf * National Semiconductor LM89 @@ -27,9 +29,9 @@ Supported chips: Addresses scanned: I2C 0x4c and 0x4d - Datasheet: Publicly available at the National Semiconductor website + Datasheet: Publicly available at the TI website - http://www.national.com/mpf/LM/LM89.html + https://www.ti.com/lit/ds/symlink/lm89.pdf * National Semiconductor LM99 @@ -37,9 +39,9 @@ Supported chips: Addresses scanned: I2C 0x4c and 0x4d - Datasheet: Publicly available at the National Semiconductor website + Datasheet: Publicly available at the TI website - http://www.national.com/pf/LM/LM99.html + https://www.ti.com/lit/ds/symlink/lm99.pdf * National Semiconductor LM86 @@ -47,9 +49,9 @@ Supported chips: Addresses scanned: I2C 0x4c - Datasheet: Publicly available at the National Semiconductor website + Datasheet: Publicly available at the TI website - http://www.national.com/mpf/LM/LM86.html + https://www.ti.com/lit/ds/symlink/lm86.pdf * Analog Devices ADM1020 @@ -57,7 +59,9 @@ Supported chips: Addresses scanned: I2C 0x4c - 0x4e - Datasheet: Publicly available at the Analog Devices website + Datasheet: Publicly available at the DigiKey website + + https://media.digikey.com/pdf/Data%20Sheets/Analog%20Devices%20PDFs/ADM1020.pdf * Analog Devices ADM1021 @@ -65,7 +69,9 @@ Supported chips: Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - Datasheet: Publicly available at the Analog Devices website + Datasheet: Publicly available at the DigiKey website + + https://media.digikey.com/pdf/Data%20Sheets/Analog%20Devices%20PDFs/ADM1021.pdf * Analog Devices ADM1021A/ADM1023 @@ -75,15 +81,18 @@ Supported chips: Datasheet: Publicly available at the Analog Devices website + https://media.digikey.com/pdf/Data%20Sheets/Analog%20Devices%20PDFs/ADM1021A.pdf + https://media.digikey.com/pdf/Data%20Sheets/Analog%20Devices%20PDFs/ADM1023.pdf + * Analog Devices ADM1032 Prefix: 'adm1032' Addresses scanned: I2C 0x4c and 0x4d - Datasheet: Publicly available at the ON Semiconductor website + Datasheet: Publicly available at the DigiKey website - https://www.onsemi.com/PowerSolutions/product.do?id=ADM1032 + https://www.digikey.com/htmldatasheets/production/53140/0/0/1/ADM1032.pdf * Analog Devices ADT7461 @@ -111,9 +120,9 @@ Supported chips: Addresses scanned: I2C 0x4b and 0x4c - Datasheet: Publicly available at the ON Semiconductor website + Datasheet: Publicly available at the DigiKey website - https://www.onsemi.com/PowerSolutions/product.do?id=ADT7481 + https://www.digikey.com/htmldatasheets/production/234607/0/0/1/ADT7481.pdf * Analog Devices ADT7482 @@ -191,7 +200,9 @@ Supported chips: Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website + + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX1617.pdf * Maxim MAX1617A @@ -199,7 +210,9 @@ Supported chips: Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website + + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX1617A.pdf * Maxim MAX6642 @@ -207,9 +220,9 @@ Supported chips: Addresses scanned: I2C 0x48-0x4f - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website - http://datasheets.maxim-ic.com/en/ds/MAX6642.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6642.pdf * Maxim MAX6646 @@ -217,9 +230,9 @@ Supported chips: Addresses scanned: I2C 0x4d - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497 + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6646-MAX6649.pdf * Maxim MAX6647 @@ -227,9 +240,9 @@ Supported chips: Addresses scanned: I2C 0x4e - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497 + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6646-MAX6649.pdf * Maxim MAX6648 @@ -237,9 +250,9 @@ Supported chips: Addresses scanned: I2C 0x4c - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500 + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6648-MAX6692.pdf * Maxim MAX6649 @@ -247,9 +260,9 @@ Supported chips: Addresses scanned: I2C 0x4c - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3497 + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX1617.pdf * Maxim MAX6654 @@ -259,9 +272,9 @@ Supported chips: 0x4c, 0x4d and 0x4e - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website - https://www.maximintegrated.com/en/products/sensors/MAX6654.html + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6654.pdf * Maxim MAX6657 @@ -269,9 +282,9 @@ Supported chips: Addresses scanned: I2C 0x4c - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578 + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6657-MAX6659.pdf * Maxim MAX6658 @@ -279,9 +292,9 @@ Supported chips: Addresses scanned: I2C 0x4c - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578 + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6657-MAX6659.pdf * Maxim MAX6659 @@ -289,9 +302,9 @@ Supported chips: Addresses scanned: I2C 0x4c, 0x4d, 0x4e - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578 + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6657-MAX6659.pdf * Maxim MAX6680 @@ -301,9 +314,9 @@ Supported chips: 0x4c, 0x4d and 0x4e - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370 + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6680-MAX6681.pdf * Maxim MAX6681 @@ -313,9 +326,9 @@ Supported chips: 0x4c, 0x4d and 0x4e - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3370 + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6680-MAX6681.pdf * Maxim MAX6692 @@ -323,9 +336,9 @@ Supported chips: Addresses scanned: I2C 0x4c - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website - http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500 + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6648-MAX6692.pdf * Maxim MAX6695 @@ -333,9 +346,9 @@ Supported chips: Addresses scanned: I2C 0x18 - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website - http://www.maxim-ic.com/datasheet/index.mvp/id/4199 + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6695-MAX6696.pdf * Maxim MAX6696 @@ -345,9 +358,9 @@ Supported chips: 0x4c, 0x4d and 0x4e - Datasheet: Publicly available at the Maxim website + Datasheet: Publicly available at the Analog Devices website - http://www.maxim-ic.com/datasheet/index.mvp/id/4199 + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6695-MAX6696.pdf * Winbond/Nuvoton W83L771W/G @@ -355,7 +368,9 @@ Supported chips: Addresses scanned: I2C 0x4c - Datasheet: No longer available + Datasheet: Publicly available at the DigiKey website + + https://mm.digikey.com/Volume0/opasdata/d220001/medias/docus/1128/W83L771W%2CW83L771G.pdf * Winbond/Nuvoton W83L771AWG/ASG @@ -381,7 +396,7 @@ Supported chips: Datasheet: Publicly available at Nuvoton website - https://www.nuvoton.com/resource-files/Nuvoton_NCT7717U_Datasheet_V111.pdf + https://www.nuvoton.com/resource-files/Nuvoton_NCT7717U_Datasheet_V111.pdf * Nuvoton NCT7718 @@ -391,7 +406,7 @@ Supported chips: Datasheet: Publicly available at Nuvoton website - https://www.nuvoton.com/resource-files/Nuvoton_NCT7718W_Datasheet_V11.pdf + https://www.nuvoton.com/resource-files/Nuvoton_NCT7718W_Datasheet_V11.pdf * Philips/NXP SA56004X @@ -401,7 +416,7 @@ Supported chips: Datasheet: Publicly available at NXP website - http://ics.nxp.com/products/interface/datasheet/sa56004x.pdf + https://www.nxp.com/docs/en/data-sheet/SA56004X.pdf * GMT G781 @@ -437,7 +452,9 @@ Supported chips: Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - Datasheets: Publicly available at the Philips website + Datasheets: Publicly available at the DigiKey website + + https://www.digikey.com/htmldatasheets/production/97606/0/0/1/ne1617.pdf * Philips NE1618 @@ -445,7 +462,9 @@ Supported chips: Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - Datasheets: Publicly available at the Philips website + Datasheets: Publicly available at the DigiKey website + + https://media.digikey.com/pdf/Data%20Sheets/NXP%20PDFs/NE1618.pdf * Genesys Logic GL523SM @@ -453,7 +472,7 @@ Supported chips: Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - Datasheet: + Datasheet: No longer available at Genesys Logic website * TI THMC10 @@ -461,7 +480,7 @@ Supported chips: Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - Datasheet: Publicly available at the TI website + Datasheet: No longer available at the TI website * Onsemi MC1066 @@ -469,7 +488,7 @@ Supported chips: Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e - Datasheet: Publicly available at the Onsemi website + Datasheet: No longer available at the Onsemi website Author: Jean Delvare diff --git a/Documentation/hwmon/macsmc-hwmon.rst b/Documentation/hwmon/macsmc-hwmon.rst new file mode 100644 index 00000000000000..6903f76df62bf2 --- /dev/null +++ b/Documentation/hwmon/macsmc-hwmon.rst @@ -0,0 +1,71 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +Kernel driver macsmc-hwmon +========================== + +Supported hardware + + * Apple Silicon Macs (M1 and up) + +Author: James Calligeros + +Description +----------- + +macsmc-hwmon exposes the Apple System Management controller's +temperature, voltage, current and power sensors, as well as +fan speed and control capabilities, via hwmon. + +Because each Apple Silicon Mac exposes a different set of sensors +(e.g. the MacBooks expose battery telemetry that is not present on +the desktop Macs), sensors present on any given machine are described +via Devicetree. The driver picks these up and registers them with +hwmon when probed. + +Manual fan speed is supported via the fan_control module parameter. This +is disabled by default and marked as unsafe, as it cannot be proven that +the system will fail safe if overheating due to manual fan control being +used. + +sysfs interface +--------------- + +currX_input + Ammeter value + +currX_label + Ammeter label + +fanX_input + Current fan speed + +fanX_label + Fan label + +fanX_min + Minimum possible fan speed + +fanX_max + Maximum possible fan speed + +fanX_target + Current fan setpoint + +inX_input + Voltmeter value + +inX_label + Voltmeter label + +powerX_input + Power meter value + +powerX_label + Power meter label + +tempX_input + Temperature sensor value + +tempX_label + Temperature sensor label + diff --git a/Documentation/hwmon/max127.rst b/Documentation/hwmon/max127.rst index dc192dd9c37ccd..09204b45f27b4a 100644 --- a/Documentation/hwmon/max127.rst +++ b/Documentation/hwmon/max127.rst @@ -13,7 +13,7 @@ Supported chips: Prefix: 'max127' - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX127-MAX128.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max127-max128.pdf Description ----------- diff --git a/Documentation/hwmon/max15301.rst b/Documentation/hwmon/max15301.rst index e2222e98304fda..a0a993195cd1dd 100644 --- a/Documentation/hwmon/max15301.rst +++ b/Documentation/hwmon/max15301.rst @@ -11,7 +11,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX15301.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max15301.pdf * Maxim MAX15303 diff --git a/Documentation/hwmon/max16064.rst b/Documentation/hwmon/max16064.rst index c06249292557a0..2a8a76d7b23043 100644 --- a/Documentation/hwmon/max16064.rst +++ b/Documentation/hwmon/max16064.rst @@ -9,7 +9,7 @@ Supported chips: Addresses scanned: - - Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf + Datasheet: https://www.digikey.com/en/htmldatasheets/production/701833/0/0/1/max16064 Author: Guenter Roeck diff --git a/Documentation/hwmon/max16065.rst b/Documentation/hwmon/max16065.rst index 45f69f334f252c..ac3dc6f023ddea 100644 --- a/Documentation/hwmon/max16065.rst +++ b/Documentation/hwmon/max16065.rst @@ -12,7 +12,7 @@ Supported chips: Datasheet: - http://datasheets.maxim-ic.com/en/ds/MAX16065-MAX16066.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/max16065-max16066.pdf * Maxim MAX16067 @@ -22,7 +22,7 @@ Supported chips: Datasheet: - http://datasheets.maxim-ic.com/en/ds/MAX16067.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/max16067.pdf * Maxim MAX16068 @@ -32,7 +32,7 @@ Supported chips: Datasheet: - http://datasheets.maxim-ic.com/en/ds/MAX16068.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/max16068.pdf * Maxim MAX16070/MAX16071 @@ -42,7 +42,7 @@ Supported chips: Datasheet: - http://datasheets.maxim-ic.com/en/ds/MAX16070-MAX16071.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/max16070-max16071.pdf Author: Guenter Roeck diff --git a/Documentation/hwmon/max1619.rst b/Documentation/hwmon/max1619.rst index b5fc175ae18d41..f134d0fa9bfd9e 100644 --- a/Documentation/hwmon/max1619.rst +++ b/Documentation/hwmon/max1619.rst @@ -9,9 +9,9 @@ Supported chips: Addresses scanned: I2C 0x18-0x1a, 0x29-0x2b, 0x4c-0x4e - Datasheet: Publicly available at the Maxim website + Datasheet: - http://pdfserv.maxim-ic.com/en/ds/MAX1619.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX1619.pdf Authors: - Oleksij Rempel , diff --git a/Documentation/hwmon/max16601.rst b/Documentation/hwmon/max16601.rst index c8c63a053e4041..3b1392bf547e9c 100644 --- a/Documentation/hwmon/max16601.rst +++ b/Documentation/hwmon/max16601.rst @@ -35,7 +35,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX16602.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max16602.pdf Author: Guenter Roeck diff --git a/Documentation/hwmon/max1668.rst b/Documentation/hwmon/max1668.rst index 417f17d750e684..e2b8a4056abed9 100644 --- a/Documentation/hwmon/max1668.rst +++ b/Documentation/hwmon/max1668.rst @@ -9,7 +9,7 @@ Supported chips: Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e - Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX1668-MAX1989.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/MAX1668-MAX1989.pdf Author: diff --git a/Documentation/hwmon/max17616.rst b/Documentation/hwmon/max17616.rst new file mode 100644 index 00000000000000..a3dc429048ae1b --- /dev/null +++ b/Documentation/hwmon/max17616.rst @@ -0,0 +1,62 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver max17616 +====================== + +Supported chips: + + * Analog Devices MAX17616/MAX17616A + + Prefix: 'max17616' + + Addresses scanned: - + + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max17616-max17616a.pdf + +Author: + + - Kim Seer Paller + + +Description +----------- + +This driver supports hardware monitoring for Analog Devices MAX17616/MAX17616A +Current-Limiter with OV/Surge, UV, Reverse Polarity, Loss of Ground Protection +with PMBus Interface. + +The MAX17616/MAX17616A is a 3V to 80V, 7A current-limiter with overvoltage, +surge, undervoltage, reverse polarity, and loss of ground protection. Through +the PMBus interface, the device can monitor input/output voltages, output current +and temperature. + +The driver is a client driver to the core PMBus driver. Please see +Documentation/hwmon/pmbus.rst for details on PMBus client drivers. + +Usage Notes +----------- + +This driver does not auto-detect devices. You will have to instantiate +the devices explicitly. Please see Documentation/i2c/instantiating-devices.rst +for details. + +Platform data support +--------------------- + +The driver supports standard PMBus driver platform data. + +Sysfs entries +------------- + +================= ======================================== +in1_label "vin" +in1_input Measured input voltage +in1_alarm Input voltage alarm +in2_label "vout1" +in2_input Measured output voltage +curr1_label "iout1" +curr1_input Measured output current. +curr1_alarm Output current alarm +temp1_input Measured temperature +temp1_alarm Chip temperature alarm +================= ======================================== diff --git a/Documentation/hwmon/max197.rst b/Documentation/hwmon/max197.rst index 02fe19bc3428c0..00e16056823f96 100644 --- a/Documentation/hwmon/max197.rst +++ b/Documentation/hwmon/max197.rst @@ -11,13 +11,13 @@ Supported chips: Prefix: 'max197' - Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX197.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/MAX197.pdf * Maxim MAX199 Prefix: 'max199' - Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX199.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/MAX199.pdf Description ----------- diff --git a/Documentation/hwmon/max20730.rst b/Documentation/hwmon/max20730.rst index cb0c95b2b1f6d3..0ce473bca889bd 100644 --- a/Documentation/hwmon/max20730.rst +++ b/Documentation/hwmon/max20730.rst @@ -11,7 +11,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX20710.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max20710.pdf * Maxim MAX20730 @@ -19,7 +19,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX20730.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max20730.pdf * Maxim MAX20734 @@ -27,7 +27,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX20734.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max20734.pdf * Maxim MAX20743 @@ -35,7 +35,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX20743.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max20743.pdf Author: Guenter Roeck diff --git a/Documentation/hwmon/max31722.rst b/Documentation/hwmon/max31722.rst index 0ab15c00b226f1..b9d176ee7a6918 100644 --- a/Documentation/hwmon/max31722.rst +++ b/Documentation/hwmon/max31722.rst @@ -11,7 +11,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31722-MAX31723.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max31722-max31723.pdf * Maxim Integrated MAX31723 @@ -21,7 +21,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31722-MAX31723.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max31722-max31723.pdf Author: Tiberiu Breana diff --git a/Documentation/hwmon/max31730.rst b/Documentation/hwmon/max31730.rst index def0de19dbd2b4..1c5a32b641879d 100644 --- a/Documentation/hwmon/max31730.rst +++ b/Documentation/hwmon/max31730.rst @@ -9,7 +9,7 @@ Supported chips: Addresses scanned: 0x1c, 0x1d, 0x1e, 0x1f, 0x4c, 0x4d, 0x4e, 0x4f - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31730.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max31730.pdf Author: Guenter Roeck diff --git a/Documentation/hwmon/max31785.rst b/Documentation/hwmon/max31785.rst index c8c6756d0ee1e2..92817436759ed4 100644 --- a/Documentation/hwmon/max31785.rst +++ b/Documentation/hwmon/max31785.rst @@ -9,7 +9,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max31785.pdf Author: Andrew Jeffery diff --git a/Documentation/hwmon/max31790.rst b/Documentation/hwmon/max31790.rst index 33c5c7330efc90..b8af2d907b6e10 100644 --- a/Documentation/hwmon/max31790.rst +++ b/Documentation/hwmon/max31790.rst @@ -9,7 +9,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://pdfserv.maximintegrated.com/en/ds/MAX31790.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31790.pdf Author: Il Han diff --git a/Documentation/hwmon/max31827.rst b/Documentation/hwmon/max31827.rst index 6cc5088b26b738..ddd03952907707 100644 --- a/Documentation/hwmon/max31827.rst +++ b/Documentation/hwmon/max31827.rst @@ -11,7 +11,7 @@ Supported chips: Addresses scanned: I2C 0x40 - 0x5f - Datasheet: Publicly available at the Analog Devices website + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31827-MAX31829.pdf * Maxim MAX31828 @@ -19,7 +19,7 @@ Supported chips: Addresses scanned: I2C 0x40 - 0x5f - Datasheet: Publicly available at the Analog Devices website + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31827-MAX31829.pdf * Maxim MAX31829 @@ -27,7 +27,7 @@ Supported chips: Addresses scanned: I2C 0x40 - 0x5f - Datasheet: Publicly available at the Analog Devices website + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31827-MAX31829.pdf Authors: diff --git a/Documentation/hwmon/max34440.rst b/Documentation/hwmon/max34440.rst index 8591a7152ce580..d6d4fbc863d96c 100644 --- a/Documentation/hwmon/max34440.rst +++ b/Documentation/hwmon/max34440.rst @@ -11,13 +11,21 @@ Supported chips: Datasheet: - + * ADI ADPM12200 + + Prefixes: 'adpm12200' + + Addresses scanned: - + + Datasheet: - + * Maxim MAX34440 Prefixes: 'max34440' Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX34440.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max34440.pdf * Maxim MAX34441 @@ -27,7 +35,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX34441.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max34441.pdf * Maxim MAX34446 @@ -37,7 +45,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX34446.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max34446.pdf * Maxim MAX34451 @@ -47,7 +55,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX34451.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max34451.pdf * Maxim MAX34460 @@ -57,7 +65,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX34460.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max34460.pdf * Maxim MAX34461 @@ -67,7 +75,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX34461.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max34461.pdf Author: Guenter Roeck @@ -79,10 +87,11 @@ This driver supports multiple devices: hardware monitoring for Maxim MAX34440 PMBus 6-Channel Power-Supply Manager, MAX34441 PMBus 5-Channel Power-Supply Manager and Intelligent Fan Controller, and MAX34446 PMBus Power-Supply Data Logger; PMBus Voltage Monitor and Sequencers for MAX34451, MAX34460, and -MAX34461; PMBus DC/DC Power Module ADPM12160. The MAX34451 supports monitoring -voltage or current of 12 channels based on GIN pins. The MAX34460 supports 12 -voltage channels, and the MAX34461 supports 16 voltage channels. The ADPM1260 -also monitors both input and output of voltage and current. +MAX34461; PMBus DC/DC Power Module ADPM12160, and ADPM12200. The MAX34451 +supports monitoring voltage or current of 12 channels based on GIN pins. The +MAX34460 supports 12 voltage channels, and the MAX34461 supports 16 voltage +channels. The ADPM12160, and ADPM12200 also monitors both input and output +of voltage and current. The driver is a client driver to the core PMBus driver. Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers. @@ -140,7 +149,8 @@ in[1-6]_reset_history Write any value to reset history. .. note:: - MAX34446 only supports in[1-4]. - - ADPM12160 only supports in[1-2]. Label is "vin1" and "vout1" respectively. + - ADPM12160, and ADPM12200 only supports in[1-2]. Label is "vin1" + and "vout1" respectively. Curr ~~~~ @@ -162,7 +172,8 @@ curr[1-6]_reset_history Write any value to reset history. - in6 and curr6 attributes only exist for MAX34440. - MAX34446 only supports curr[1-4]. - - For ADPM12160, curr[1] is "iin1" and curr[2-6] are "iout[1-5]. + - For ADPM12160, and ADPM12200, curr[1] is "iin1" and curr[2-6] + are "iout[1-5]". Power ~~~~~ @@ -198,7 +209,7 @@ temp[1-8]_reset_history Write any value to reset history. .. note:: - temp7 and temp8 attributes only exist for MAX34440. - MAX34446 only supports temp[1-3]. - - ADPM12160 only supports temp[1]. + - ADPM12160, and ADPM12200 only supports temp[1]. .. note:: diff --git a/Documentation/hwmon/max6639.rst b/Documentation/hwmon/max6639.rst index c85d285a3489d9..492c13a5880d31 100644 --- a/Documentation/hwmon/max6639.rst +++ b/Documentation/hwmon/max6639.rst @@ -9,7 +9,7 @@ Supported chips: Addresses scanned: I2C 0x2c, 0x2e, 0x2f - Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX6639-MAX6639F.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max6639-max6639f.pdf Authors: - He Changqing diff --git a/Documentation/hwmon/max6650.rst b/Documentation/hwmon/max6650.rst index 7952b6ecaa2df7..427f353c5e9c8f 100644 --- a/Documentation/hwmon/max6650.rst +++ b/Documentation/hwmon/max6650.rst @@ -9,7 +9,7 @@ Supported chips: Addresses scanned: none - Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6650-MAX6651.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6650-MAX6651.pdf * Maxim MAX6651 @@ -17,7 +17,7 @@ Supported chips: Addresses scanned: none - Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6650-MAX6651.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/MAX6650-MAX6651.pdf Authors: - Hans J. Koch diff --git a/Documentation/hwmon/max6697.rst b/Documentation/hwmon/max6697.rst index 90ca224c446ae4..5b37ff08ff449d 100644 --- a/Documentation/hwmon/max6697.rst +++ b/Documentation/hwmon/max6697.rst @@ -7,61 +7,61 @@ Supported chips: Prefix: 'max6581' - Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6581.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max6581.pdf * Maxim MAX6602 Prefix: 'max6602' - Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6602.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max6602.pdf * Maxim MAX6622 Prefix: 'max6622' - Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6622.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max6622.pdf * Maxim MAX6636 Prefix: 'max6636' - Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6636.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max6636.pdf * Maxim MAX6689 Prefix: 'max6689' - Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6689.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max6689.pdf * Maxim MAX6693 Prefix: 'max6693' - Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6693.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max6693.pdf * Maxim MAX6694 Prefix: 'max6694' - Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6694.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max6694.pdf * Maxim MAX6697 Prefix: 'max6697' - Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6697.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max6697.pdf * Maxim MAX6698 Prefix: 'max6698' - Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6698.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max6698.pdf * Maxim MAX6699 Prefix: 'max6699' - Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6699.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max6699.pdf Author: diff --git a/Documentation/hwmon/max77705.rst b/Documentation/hwmon/max77705.rst index 4a7680a340e1bd..5202de614647c6 100644 --- a/Documentation/hwmon/max77705.rst +++ b/Documentation/hwmon/max77705.rst @@ -11,7 +11,9 @@ Supported chips: Addresses scanned: none - Datasheet: Not available + Datasheet: + + https://www.analog.com/media/en/technical-documentation/data-sheets/max77505.pdf Authors: - Dzmitry Sankouski diff --git a/Documentation/hwmon/max8688.rst b/Documentation/hwmon/max8688.rst index 71e7f2cbe2e20c..71b6b9ee90ab0e 100644 --- a/Documentation/hwmon/max8688.rst +++ b/Documentation/hwmon/max8688.rst @@ -9,7 +9,7 @@ Supported chips: Addresses scanned: - - Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/max8688.pdf Author: Guenter Roeck diff --git a/Documentation/hwmon/mp2925.rst b/Documentation/hwmon/mp2925.rst new file mode 100644 index 00000000000000..63eda215b6cb49 --- /dev/null +++ b/Documentation/hwmon/mp2925.rst @@ -0,0 +1,151 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver mp2925 +==================== + +Supported chips: + + * MPS mp2925 + + Prefix: 'mp2925' + + * MPS mp2929 + + Prefix: 'mp2929' + +Author: + + Wensheng Wang + +Description +----------- + +This driver implements support for Monolithic Power Systems, Inc. (MPS) +MP2925 Dual Loop Digital Multi-phase Controller. + +Device compliant with: + +- PMBus rev 1.3 interface. + +The driver exports the following attributes via the 'sysfs' files +for input voltage: + +**in1_input** + +**in1_label** + +**in1_crit** + +**in1_crit_alarm** + +**in1_lcrit** + +**in1_lcrit_alarm** + +**in1_max** + +**in1_max_alarm** + +**in1_min** + +**in1_min_alarm** + +The driver provides the following attributes for output voltage: + +**in2_input** + +**in2_label** + +**in2_crit** + +**in2_crit_alarm** + +**in2_lcrit** + +**in2_lcrit_alarm** + +**in3_input** + +**in3_label** + +**in3_crit** + +**in3_crit_alarm** + +**in3_lcrit** + +**in3_lcrit_alarm** + +The driver provides the following attributes for input current: + +**curr1_input** + +**curr1_label** + +The driver provides the following attributes for output current: + +**curr2_input** + +**curr2_label** + +**curr2_crit** + +**curr2_crit_alarm** + +**curr2_max** + +**curr2_max_alarm** + +**curr3_input** + +**curr3_label** + +**curr3_crit** + +**curr3_crit_alarm** + +**curr3_max** + +**curr3_max_alarm** + +The driver provides the following attributes for input power: + +**power1_input** + +**power1_label** + +**power2_input** + +**power2_label** + +The driver provides the following attributes for output power: + +**power3_input** + +**power3_label** + +**power4_input** + +**power4_label** + +The driver provides the following attributes for temperature: + +**temp1_input** + +**temp1_crit** + +**temp1_crit_alarm** + +**temp1_max** + +**temp1_max_alarm** + +**temp2_input** + +**temp2_crit** + +**temp2_crit_alarm** + +**temp2_max** + +**temp2_max_alarm** diff --git a/Documentation/hwmon/mp9945.rst b/Documentation/hwmon/mp9945.rst new file mode 100644 index 00000000000000..f406f96efcf9ac --- /dev/null +++ b/Documentation/hwmon/mp9945.rst @@ -0,0 +1,117 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver mp9945 +===================== + +Supported chips: + + * MPS mp9945 + + Prefix: 'mp9945' + +Author: + + Cosmo Chou + +Description +----------- + +This driver implements support for Monolithic Power Systems, Inc. (MPS) +MP9945 Digital Single-phase Controller. + +Device compliant with: + +- PMBus rev 1.3 interface. + +The driver exports the following attributes via the 'sysfs' files +for input voltage: + +**in1_input** + +**in1_label** + +**in1_crit** + +**in1_crit_alarm** + +**in1_lcrit** + +**in1_lcrit_alarm** + +**in1_max** + +**in1_max_alarm** + +**in1_min** + +**in1_min_alarm** + +The driver provides the following attributes for output voltage: + +**in2_input** + +**in2_label** + +**in2_crit** + +**in2_crit_alarm** + +**in2_lcrit** + +**in2_lcrit_alarm** + +**in2_min** + +**in2_min_alarm** + +The driver provides the following attributes for input current: + +**curr1_input** + +**curr1_label** + +**curr1_max** + +**curr1_max_alarm** + +The driver provides the following attributes for output current: + +**curr2_input** + +**curr2_label** + +**curr2_crit** + +**curr2_crit_alarm** + +**curr2_max** + +**curr2_max_alarm** + +The driver provides the following attributes for input power: + +**power1_input** + +**power1_label** + +The driver provides the following attributes for output power: + +**power2_input** + +**power2_label** + +**power2_max** + +**power2_max_alarm** + +The driver provides the following attributes for temperature: + +**temp1_input** + +**temp1_crit** + +**temp1_crit_alarm** + +**temp1_max** + +**temp1_max_alarm** diff --git a/Documentation/hwmon/pmbus.rst b/Documentation/hwmon/pmbus.rst index d477124cf67fcb..a8e01a5b96da30 100644 --- a/Documentation/hwmon/pmbus.rst +++ b/Documentation/hwmon/pmbus.rst @@ -74,7 +74,7 @@ Supported chips: Datasheet: - Not published + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX20796.pdf * Generic PMBus devices diff --git a/Documentation/hwmon/sy7636a-hwmon.rst b/Documentation/hwmon/sy7636a-hwmon.rst index c85db7b3294158..0143ce0e5db765 100644 --- a/Documentation/hwmon/sy7636a-hwmon.rst +++ b/Documentation/hwmon/sy7636a-hwmon.rst @@ -17,10 +17,10 @@ the Silergy SY7636A PMIC. The following sensors are supported * Temperature - - SoC on-die temperature in milli-degree C + - Temperature of external NTC in milli-degree C sysfs-Interface --------------- temp0_input - - SoC on-die temperature (milli-degree C) + - Temperature of external NTC (milli-degree C) diff --git a/Documentation/hwmon/tsc1641.rst b/Documentation/hwmon/tsc1641.rst new file mode 100644 index 00000000000000..425e25f7a7d157 --- /dev/null +++ b/Documentation/hwmon/tsc1641.rst @@ -0,0 +1,87 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +Kernel driver tsc1641 +===================== + +Supported chips: + + * ST TSC1641 + + Prefix: 'tsc1641' + + Addresses scanned: - + + Datasheet: + https://www.st.com/resource/en/datasheet/tsc1641.pdf + +Author: + - Igor Reznichenko + + +Description +----------- + +The TSC1641 is a high-precision current, voltage, power, and temperature +monitoring analog front-end (AFE). It monitors bidirectional current into a +shunt resistor and load voltage up to 60 V in a synchronized way. Digital bus +interface is I2C/SMbus. The TSC1641 allows the assertion of several alerts +regarding the voltage, current, power and temperature. + +Usage Notes +----------- + +The TSC1641 driver requires the value of the external shunt resistor to +correctly compute current and power measurements. The resistor value, in +micro-ohms, should be provided either through the device tree property +"shunt-resistor-micro-ohms" or via writable sysfs attribute "shunt_resistor". +Please refer to the Documentation/devicetree/bindings/hwmon/st,tsc1641.yaml +for bindings if the device tree is used. + +Supported range of shunt resistor values is from 100 uOhm to 655.35 mOhm, in +10 uOhm steps. +When selecting the value keep in mind device maximum DC power measurement is +1600W. See datasheet p.22 for ST recommendations on selecting shunt value. + +If the shunt resistor value is not specified in the device tree, the driver +initializes it to 1000 uOhm by default. Users may configure the correct shunt +resistor value at runtime by writing to the "shunt_resistor" sysfs attribute. + +The driver only supports continuous operating mode. +Measurement ranges: + +================ =============================================================== +Current Bidirectional, dependent on shunt +Bus voltage 0-60V +Maximum DC power 1600W +Temperature -40C to +125C +================ =============================================================== + +Sysfs entries +------------- + +==================== =========================================================== +in0_input bus voltage (mV) +in0_max bus voltage max alarm limit (mV) +in0_max_alarm bus voltage max alarm limit exceeded +in0_min bus voltage min alarm limit (mV) +in0_min_alarm bus voltage min alarm limit exceeded + +curr1_input current measurement (mA) +curr1_max current max alarm limit (mA) +curr1_max_alarm current max alarm limit exceeded +curr1_min current min alarm limit (mA) +curr1_min_alarm current min alarm limit exceeded + +power1_input power measurement (uW) +power1_max power max alarm limit (uW) +power1_max_alarm power max alarm limit exceeded + +shunt_resistor shunt resistor value (uOhms) + +temp1_input temperature measurement (mdegC) +temp1_max temperature max alarm limit (mdegC) +temp1_max_alarm temperature max alarm limit exceeded + +update_interval data conversion time (1 - 33ms), longer conversion time + corresponds to higher effective resolution in bits +==================== =========================================================== \ No newline at end of file diff --git a/Documentation/hwmon/zl6100.rst b/Documentation/hwmon/zl6100.rst index d42ed9d3ac69a6..1513c9d2d461a2 100644 --- a/Documentation/hwmon/zl6100.rst +++ b/Documentation/hwmon/zl6100.rst @@ -9,7 +9,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://www.renesas.com/us/en/document/dst/zl2004-datasheet.pdf + Datasheet: https://www.renesas.com/us/en/document/dst/zl2004-datasheet * Renesas / Intersil / Zilker Labs ZL2005 @@ -17,7 +17,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://www.renesas.com/us/en/document/dst/zl2005-datasheet.pdf + Datasheet: https://www.renesas.com/us/en/document/dst/zl2005-datasheet * Renesas / Intersil / Zilker Labs ZL2006 @@ -25,7 +25,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://www.renesas.com/us/en/document/dst/zl2006-datasheet.pdf + Datasheet: https://www.renesas.com/us/en/document/dst/zl2006-datasheet * Renesas / Intersil / Zilker Labs ZL2008 @@ -33,7 +33,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://www.renesas.com/us/en/document/dst/zl2008-datasheet.pdf + Datasheet: https://www.renesas.com/us/en/document/dst/zl2008-datasheet * Renesas / Intersil / Zilker Labs ZL2105 @@ -41,7 +41,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://www.renesas.com/us/en/document/dst/zl2105-datasheet.pdf + Datasheet: https://www.renesas.com/us/en/document/dst/zl2105-datasheet * Renesas / Intersil / Zilker Labs ZL2106 @@ -49,7 +49,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://www.renesas.com/us/en/document/dst/zl2106-datasheet.pdf + Datasheet: https://www.renesas.com/us/en/document/dst/zl2106-datasheet * Renesas / Intersil / Zilker Labs ZL6100 @@ -57,7 +57,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://www.renesas.com/us/en/document/dst/zl6100-datasheet.pdf + Datasheet: https://www.renesas.com/us/en/document/dst/zl6100-datasheet * Renesas / Intersil / Zilker Labs ZL6105 @@ -65,7 +65,7 @@ Supported chips: Addresses scanned: - - Datasheet: https://www.renesas.com/us/en/document/dst/zl6105-datasheet.pdf + Datasheet: https://www.renesas.com/us/en/document/dst/zl6105-datasheet * Renesas / Intersil / Zilker Labs ZL8802 diff --git a/Documentation/i2c/busses/i2c-i801.rst b/Documentation/i2c/busses/i2c-i801.rst index 36c563ad3f068f..bbbce90eb7d843 100644 --- a/Documentation/i2c/busses/i2c-i801.rst +++ b/Documentation/i2c/busses/i2c-i801.rst @@ -51,6 +51,8 @@ Supported adapters: * Intel Arrow Lake (SOC) * Intel Panther Lake (SOC) * Intel Wildcat Lake (SOC) + * Intel Diamond Rapids (SOC) + * Intel Nova Lake (PCH) Datasheets: Publicly available at the Intel website diff --git a/Documentation/iio/ade9000.rst b/Documentation/iio/ade9000.rst index 43d4b8dc1cb72c..c9ff702a42512b 100644 --- a/Documentation/iio/ade9000.rst +++ b/Documentation/iio/ade9000.rst @@ -264,5 +264,5 @@ Configure RMS voltage event thresholds (requires interrupts): 8. IIO Interfacing Tools ======================== -See ``Documentation/iio/iio_tools.rst`` for the description of the available IIO +See Documentation/iio/iio_tools.rst for the description of the available IIO interfacing tools. diff --git a/Documentation/iio/adis16475.rst b/Documentation/iio/adis16475.rst index 4bf0998be36efc..89a388490ab735 100644 --- a/Documentation/iio/adis16475.rst +++ b/Documentation/iio/adis16475.rst @@ -374,11 +374,11 @@ Obtain buffered data: 00001740 01 1a 00 00 ff ff fe 31 00 00 46 aa 00 03 37 f7 |.......1..F...7.| ... -See ``Documentation/iio/iio_devbuf.rst`` for more information about how buffered +See Documentation/iio/iio_devbuf.rst for more information about how buffered data is structured. 4. IIO Interfacing Tools ======================== -See ``Documentation/iio/iio_tools.rst`` for the description of the available IIO +See Documentation/iio/iio_tools.rst for the description of the available IIO interfacing tools. diff --git a/Documentation/iio/adis16480.rst b/Documentation/iio/adis16480.rst index 4a2d40e0daa798..cce5f3e0174158 100644 --- a/Documentation/iio/adis16480.rst +++ b/Documentation/iio/adis16480.rst @@ -436,11 +436,11 @@ Obtain buffered data:: 00006b60 09 63 00 00 00 00 1b 13 00 00 22 2f 00 03 23 91 |.c........"/..#.| ... -See ``Documentation/iio/iio_devbuf.rst`` for more information about how buffered +See Documentation/iio/iio_devbuf.rst for more information about how buffered data is structured. 4. IIO Interfacing Tools ======================== -See ``Documentation/iio/iio_tools.rst`` for the description of the available IIO +See Documentation/iio/iio_tools.rst for the description of the available IIO interfacing tools. diff --git a/Documentation/iio/adis16550.rst b/Documentation/iio/adis16550.rst index 25db7b8060c421..c9bbc0a857b03b 100644 --- a/Documentation/iio/adis16550.rst +++ b/Documentation/iio/adis16550.rst @@ -366,11 +366,11 @@ Obtain buffered data: 0000ceb0 00 00 0d 2f 00 00 05 25 00 00 07 8d 00 00 a2 ce |.../...%........| ... -See ``Documentation/iio/iio_devbuf.rst`` for more information about how buffered +See Documentation/iio/iio_devbuf.rst for more information about how buffered data is structured. 4. IIO Interfacing Tools ======================== -See ``Documentation/iio/iio_tools.rst`` for the description of the available IIO +See Documentation/iio/iio_tools.rst for the description of the available IIO interfacing tools. diff --git a/Documentation/iio/adxl345.rst b/Documentation/iio/adxl345.rst index afdb35f8b72e78..bb19d64f67c3d2 100644 --- a/Documentation/iio/adxl345.rst +++ b/Documentation/iio/adxl345.rst @@ -433,11 +433,11 @@ Obtain buffered data: 00000f0 00004 00014 00015 00005 00012 00011 00005 00012 ... -See ``Documentation/iio/iio_devbuf.rst`` for more information about how buffered +See Documentation/iio/iio_devbuf.rst for more information about how buffered data is structured. 4. IIO Interfacing Tools ======================== -See ``Documentation/iio/iio_tools.rst`` for the description of the available IIO +See Documentation/iio/iio_tools.rst for the description of the available IIO interfacing tools. diff --git a/Documentation/iio/adxl380.rst b/Documentation/iio/adxl380.rst index 66c8a4d4f767e5..61cafa2f98bf36 100644 --- a/Documentation/iio/adxl380.rst +++ b/Documentation/iio/adxl380.rst @@ -223,11 +223,11 @@ Obtain buffered data: 002bc3c0 f7 fd 00 cb fb 94 24 80 f7 e3 00 f2 fb b8 24 80 |......$.......$.| ... -See ``Documentation/iio/iio_devbuf.rst`` for more information about how buffered +See Documentation/iio/iio_devbuf.rst for more information about how buffered data is structured. 4. IIO Interfacing Tools ======================== -See ``Documentation/iio/iio_tools.rst`` for the description of the available IIO +See Documentation/iio/iio_tools.rst for the description of the available IIO interfacing tools. diff --git a/Documentation/input/event-codes.rst b/Documentation/input/event-codes.rst index 4424cbff251f87..77a6c9b3956d56 100644 --- a/Documentation/input/event-codes.rst +++ b/Documentation/input/event-codes.rst @@ -241,6 +241,12 @@ A few EV_ABS codes have special meanings: emitted only when the selected profile changes, indicating the newly selected profile value. +* ABS_SND_PROFILE: + + - Used to describe the state of a multi-value sound profile switch. + An event is emitted only when the selected profile changes, + indicating the newly selected profile value. + * ABS_MT_: - Used to describe multitouch input events. Please see diff --git a/Documentation/kbuild/kbuild.rst b/Documentation/kbuild/kbuild.rst index 3388a10f2dcc89..82826b0332df41 100644 --- a/Documentation/kbuild/kbuild.rst +++ b/Documentation/kbuild/kbuild.rst @@ -328,8 +328,14 @@ KBUILD_BUILD_TIMESTAMP ---------------------- Setting this to a date string overrides the timestamp used in the UTS_VERSION definition (uname -v in the running kernel). The value has to -be a string that can be passed to date -d. The default value -is the output of the date command at one point during build. +be a string that can be passed to date -d. E.g.:: + + $ KBUILD_BUILD_TIMESTAMP="Mon Oct 13 00:00:00 UTC 2025" make + +The default value is the output of the date command at one point during +build. If provided, this timestamp will also be used for mtime fields +within any initramfs archive. Initramfs mtimes are 32-bit, so dates before +the 1970 Unix epoch, or after 2106-02-07 06:28:15 UTC will fail. KBUILD_BUILD_USER, KBUILD_BUILD_HOST ------------------------------------ diff --git a/Documentation/leds/leds-lp5521.rst b/Documentation/leds/leds-lp5521.rst index 0432615b083d66..4c838c88820efc 100644 --- a/Documentation/leds/leds-lp5521.rst +++ b/Documentation/leds/leds-lp5521.rst @@ -22,7 +22,7 @@ More details of the instructions can be found from the public data sheet. LP5521 has the internal program memory for running various LED patterns. There are two ways to run LED patterns. -1) Legacy interface - enginex_mode and enginex_load +1) sysfs interface - enginex_mode and enginex_load Control interface for the engines: x is 1 .. 3 diff --git a/Documentation/leds/leds-lp5523.rst b/Documentation/leds/leds-lp5523.rst index 7d7362a1dd5759..f5a87b07514ac0 100644 --- a/Documentation/leds/leds-lp5523.rst +++ b/Documentation/leds/leds-lp5523.rst @@ -35,7 +35,7 @@ If both fields are NULL, 'lp5523' is used by default. LP5523 has the internal program memory for running various LED patterns. There are two ways to run LED patterns. -1) Legacy interface - enginex_mode, enginex_load and enginex_leds +1) sysfs interface - enginex_mode, enginex_load and enginex_leds Control interface for the engines: diff --git a/Documentation/locking/seqlock.rst b/Documentation/locking/seqlock.rst index 3fb7ea3ab22a6c..9899871d3d9a95 100644 --- a/Documentation/locking/seqlock.rst +++ b/Documentation/locking/seqlock.rst @@ -220,13 +220,14 @@ Read path, three categories: according to a passed marker. This is used to avoid lockless readers starvation (too much retry loops) in case of a sharp spike in write activity. First, a lockless read is tried (even marker passed). If - that trial fails (odd sequence counter is returned, which is used as - the next iteration marker), the lockless read is transformed to a - full locking read and no retry loop is necessary:: + that trial fails (sequence counter doesn't match), make the marker + odd for the next iteration, the lockless read is transformed to a + full locking read and no retry loop is necessary, for example:: /* marker; even initialization */ - int seq = 0; + int seq = 1; do { + seq++; /* 2 on the 1st/lockless path, otherwise odd */ read_seqbegin_or_lock(&foo_seqlock, &seq); /* ... [[read-side critical section]] ... */ diff --git a/Documentation/maintainer/maintainer-entry-profile.rst b/Documentation/maintainer/maintainer-entry-profile.rst index d36dd892a78ad8..6020d188e13de1 100644 --- a/Documentation/maintainer/maintainer-entry-profile.rst +++ b/Documentation/maintainer/maintainer-entry-profile.rst @@ -110,5 +110,6 @@ to do something different in the near future. ../process/maintainer-netdev ../driver-api/vfio-pci-device-specific-driver-acceptance ../nvme/feature-and-quirk-policy + ../filesystems/nfs/nfsd-maintainer-entry-profile ../filesystems/xfs/xfs-maintainer-entry-profile ../mm/damon/maintainer-profile diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt index 1d164e0057769c..61b7317bcf2ebb 100644 --- a/Documentation/memory-barriers.txt +++ b/Documentation/memory-barriers.txt @@ -2182,9 +2182,11 @@ set_current_state() may be wrapped by: which therefore also imply a general memory barrier after setting the state. The whole sequence above is available in various canned forms, all of which -interpolate the memory barrier in the right place: +interpolate the memory barrier in the right place, for example: wait_event(); + wait_event_cmd(); + wait_event_exclusive_cmd(); wait_event_interruptible(); wait_event_interruptible_exclusive(); wait_event_interruptible_timeout(); @@ -2192,8 +2194,6 @@ interpolate the memory barrier in the right place: wait_event_timeout(); wait_on_bit(); wait_on_bit_lock(); - wait_event_cmd(); - wait_event_exclusive_cmd(); Secondly, code that performs a wake up normally follows something like this: diff --git a/Documentation/misc-devices/amd-sbi.rst b/Documentation/misc-devices/amd-sbi.rst index 5648fc6ec5726a..07ceb44fbe5e19 100644 --- a/Documentation/misc-devices/amd-sbi.rst +++ b/Documentation/misc-devices/amd-sbi.rst @@ -28,8 +28,10 @@ MCAMSR and register xfer commands. Register sets is common across APML protocols. IOCTL is providing synchronization among protocols as transactions may create race condition. -$ ls -al /dev/sbrmi-3c -crw------- 1 root root 10, 53 Jul 10 11:13 /dev/sbrmi-3c +.. code-block:: bash + + $ ls -al /dev/sbrmi-3c + crw------- 1 root root 10, 53 Jul 10 11:13 /dev/sbrmi-3c apml_sbrmi driver registers hwmon sensors for monitoring power_cap_max, current power consumption and managing power_cap. diff --git a/Documentation/misc-devices/mrvl_cn10k_dpi.rst b/Documentation/misc-devices/mrvl_cn10k_dpi.rst index a75e372723d860..fa9b8cd6806f14 100644 --- a/Documentation/misc-devices/mrvl_cn10k_dpi.rst +++ b/Documentation/misc-devices/mrvl_cn10k_dpi.rst @@ -33,12 +33,12 @@ drivers/misc/mrvl_cn10k_dpi.c Driver IOCTLs ============= -:c:macro::`DPI_MPS_MRRS_CFG` +:c:macro:`DPI_MPS_MRRS_CFG` ioctl that sets max payload size & max read request size parameters of a pem port to which DMA engines are wired. -:c:macro::`DPI_ENGINE_CFG` +:c:macro:`DPI_ENGINE_CFG` ioctl that sets DMA engine's fifo sizes & max outstanding load request thresholds. diff --git a/Documentation/misc-devices/tps6594-pfsm.rst b/Documentation/misc-devices/tps6594-pfsm.rst index 4ada37ccdcbae8..5f17a4fd9579ea 100644 --- a/Documentation/misc-devices/tps6594-pfsm.rst +++ b/Documentation/misc-devices/tps6594-pfsm.rst @@ -39,28 +39,28 @@ include/uapi/linux/tps6594_pfsm.h Driver IOCTLs ============= -:c:macro::`PMIC_GOTO_STANDBY` +:c:macro:`PMIC_GOTO_STANDBY` All device resources are powered down. The processor is off, and no voltage domains are energized. -:c:macro::`PMIC_GOTO_LP_STANDBY` +:c:macro:`PMIC_GOTO_LP_STANDBY` The digital and analog functions of the PMIC, which are not required to be always-on, are turned off (low-power). -:c:macro::`PMIC_UPDATE_PGM` +:c:macro:`PMIC_UPDATE_PGM` Triggers a firmware update. -:c:macro::`PMIC_SET_ACTIVE_STATE` +:c:macro:`PMIC_SET_ACTIVE_STATE` One of the operational modes. The PMICs are fully functional and supply power to all PDN loads. All voltage domains are energized in both MCU and Main processor sections. -:c:macro::`PMIC_SET_MCU_ONLY_STATE` +:c:macro:`PMIC_SET_MCU_ONLY_STATE` One of the operational modes. Only the power resources assigned to the MCU Safety Island are on. -:c:macro::`PMIC_SET_RETENTION_STATE` +:c:macro:`PMIC_SET_RETENTION_STATE` One of the operational modes. Depending on the triggers set, some DDR/GPIO voltage domains can remain energized, while all other domains are off to minimize diff --git a/Documentation/misc-devices/uacce.rst b/Documentation/misc-devices/uacce.rst index 1db412e9b1a380..5f78d413e379f4 100644 --- a/Documentation/misc-devices/uacce.rst +++ b/Documentation/misc-devices/uacce.rst @@ -1,7 +1,10 @@ .. SPDX-License-Identifier: GPL-2.0 -Introduction of Uacce ---------------------- +Uacce (Unified/User-space-access-intended Accelerator Framework) +================================================================ + +Introduction +------------ Uacce (Unified/User-space-access-intended Accelerator Framework) targets to provide Shared Virtual Addressing (SVA) between accelerators and processes. diff --git a/Documentation/mm/active_mm.rst b/Documentation/mm/active_mm.rst index d096fc091e2330..60d819d7d0435a 100644 --- a/Documentation/mm/active_mm.rst +++ b/Documentation/mm/active_mm.rst @@ -92,4 +92,4 @@ helpers, which abstract this config option. and register state is separate, the alpha PALcode joins the two, and you need to switch both together). - (From http://marc.info/?l=linux-kernel&m=93337278602211&w=2) + (From https://lore.kernel.org/lkml/Pine.LNX.4.10.9907301410280.752-100000@penguin.transmeta.com/) diff --git a/Documentation/mm/damon/design.rst b/Documentation/mm/damon/design.rst index 80354f4f42bac1..2d8d8ca1e0a323 100644 --- a/Documentation/mm/damon/design.rst +++ b/Documentation/mm/damon/design.rst @@ -381,8 +381,8 @@ That is, assumes 4% (20% of 20%) DAMON-observed access events ratio (source) to capture 64% (80% multipled by 80%) real access events (outcomes). To know how user-space can use this feature via :ref:`DAMON sysfs interface -`, refer to :ref:`intervals_goal ` part of -the documentation. +`, refer to :ref:`intervals_goal +` part of the documentation. .. _damon_design_damos: @@ -564,9 +564,9 @@ aggressiveness (the quota) of the corresponding scheme. For example, if DAMOS is under achieving the goal, DAMOS automatically increases the quota. If DAMOS is over achieving the goal, it decreases the quota. -The goal can be specified with four parameters, namely ``target_metric``, -``target_value``, ``current_value`` and ``nid``. The auto-tuning mechanism -tries to make ``current_value`` of ``target_metric`` be same to +The goal can be specified with five parameters, namely ``target_metric``, +``target_value``, ``current_value``, ``nid`` and ``path``. The auto-tuning +mechanism tries to make ``current_value`` of ``target_metric`` be same to ``target_value``. - ``user_input``: User-provided value. Users could use any metric that they @@ -581,9 +581,18 @@ tries to make ``current_value`` of ``target_metric`` be same to set by users at the initial time. In other words, DAMOS does self-feedback. - ``node_mem_used_bp``: Specific NUMA node's used memory ratio in bp (1/10,000). - ``node_mem_free_bp``: Specific NUMA node's free memory ratio in bp (1/10,000). - -``nid`` is optionally required for only ``node_mem_used_bp`` and -``node_mem_free_bp`` to point the specific NUMA node. +- ``node_memcg_used_bp``: Specific cgroup's node used memory ratio for a + specific NUMA node, in bp (1/10,000). +- ``node_memcg_free_bp``: Specific cgroup's node unused memory ratio for a + specific NUMA node, in bp (1/10,000). + +``nid`` is optionally required for only ``node_mem_used_bp``, +``node_mem_free_bp``, ``node_memcg_used_bp`` and ``node_memcg_free_bp`` to +point the specific NUMA node. + +``path`` is optionally required for only ``node_memcg_used_bp`` and +``node_memcg_free_bp`` to point the path to the cgroup. The value should be +the path of the memory cgroup from the cgroups mount point. To know how user-space can set the tuning goal metric, the target value, and/or the current value via :ref:`DAMON sysfs interface `, refer to diff --git a/Documentation/mm/damon/maintainer-profile.rst b/Documentation/mm/damon/maintainer-profile.rst index 58a3fb3c576266..e761edada1e9dd 100644 --- a/Documentation/mm/damon/maintainer-profile.rst +++ b/Documentation/mm/damon/maintainer-profile.rst @@ -27,8 +27,8 @@ maintainer. Note again the patches for `mm-new tree `_ are queued by the memory management -subsystem maintainer. If the patches requires some patches in `damon/next tree -`_ which not yet merged in mm-new, +subsystem maintainer. If the patches require some patches in `damon/next tree +`_ which have not yet merged in mm-new, please make sure the requirement is clearly specified. Submit checklist addendum @@ -57,7 +57,7 @@ Key cycle dates Patches can be sent anytime. Key cycle dates of the `mm-new `_, `mm-unstable -`_and `mm-stable +`_ and `mm-stable `_ trees depend on the memory management subsystem maintainer. @@ -99,5 +99,5 @@ Schedules and reservation status are available at the Google `doc `_. There is also a public Google `calendar `_ -that has the events. Anyone can subscribe it. DAMON maintainer will also -provide periodic reminder to the mailing list (damon@lists.linux.dev). +that has the events. Anyone can subscribe to it. DAMON maintainer will also +provide periodic reminders to the mailing list (damon@lists.linux.dev). diff --git a/Documentation/mm/index.rst b/Documentation/mm/index.rst index ba6a8872849ba1..7aa2a888690832 100644 --- a/Documentation/mm/index.rst +++ b/Documentation/mm/index.rst @@ -48,6 +48,7 @@ documentation, or deleted if it has served its purpose. hugetlbfs_reserv ksm memory-model + memfd_preservation mmu_notifier multigen_lru numa diff --git a/Documentation/mm/memfd_preservation.rst b/Documentation/mm/memfd_preservation.rst new file mode 100644 index 00000000000000..66e0fb6d5ef0e3 --- /dev/null +++ b/Documentation/mm/memfd_preservation.rst @@ -0,0 +1,23 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +========================== +Memfd Preservation via LUO +========================== + +.. kernel-doc:: mm/memfd_luo.c + :doc: Memfd Preservation via LUO + +Memfd Preservation ABI +====================== + +.. kernel-doc:: include/linux/kho/abi/memfd.h + :doc: DOC: memfd Live Update ABI + +.. kernel-doc:: include/linux/kho/abi/memfd.h + :internal: + +See Also +======== + +- :doc:`/core-api/liveupdate` +- :doc:`/core-api/kho/concepts` diff --git a/Documentation/mm/memory-model.rst b/Documentation/mm/memory-model.rst index 5f3eafbbc52034..7957122039e876 100644 --- a/Documentation/mm/memory-model.rst +++ b/Documentation/mm/memory-model.rst @@ -165,7 +165,7 @@ The users of `ZONE_DEVICE` are: * pmem: Map platform persistent memory to be used as a direct-I/O target via DAX mappings. -* hmm: Extend `ZONE_DEVICE` with `->page_fault()` and `->page_free()` +* hmm: Extend `ZONE_DEVICE` with `->page_fault()` and `->folio_free()` event callbacks to allow a device-driver to coordinate memory management events related to device-memory, typically GPU memory. See Documentation/mm/hmm.rst. diff --git a/Documentation/mm/page_owner.rst b/Documentation/mm/page_owner.rst index 3a45a20fc05a1f..6b12f3b007ec91 100644 --- a/Documentation/mm/page_owner.rst +++ b/Documentation/mm/page_owner.rst @@ -27,7 +27,10 @@ enabled. Other usages are more than welcome. It can also be used to show all the stacks and their current number of allocated base pages, which gives us a quick overview of where the memory is going without the need to screen through all the pages and match the -allocation and free operation. +allocation and free operation. It's also possible to show only a numeric +identifier of all the stacks (without stack traces) and their number of +allocated base pages (faster to read and parse, eg, for monitoring) that +can be matched with stacks later (show_handles and show_stacks_handles). page owner is disabled by default. So, if you'd like to use it, you need to add "page_owner=on" to your boot cmdline. If the kernel is built @@ -116,6 +119,33 @@ Usage nr_base_pages: 20824 ... + cat /sys/kernel/debug/page_owner_stacks/show_handles > handles_7000.txt + cat handles_7000.txt + handle: 42 + nr_base_pages: 20824 + ... + + cat /sys/kernel/debug/page_owner_stacks/show_stacks_handles > stacks_handles.txt + cat stacks_handles.txt + post_alloc_hook+0x177/0x1a0 + get_page_from_freelist+0xd01/0xd80 + __alloc_pages+0x39e/0x7e0 + alloc_pages_mpol+0x22e/0x490 + folio_alloc+0xd5/0x110 + filemap_alloc_folio+0x78/0x230 + page_cache_ra_order+0x287/0x6f0 + filemap_get_pages+0x517/0x1160 + filemap_read+0x304/0x9f0 + xfs_file_buffered_read+0xe6/0x1d0 [xfs] + xfs_file_read_iter+0x1f0/0x380 [xfs] + __kernel_read+0x3b9/0x730 + kernel_read_file+0x309/0x4d0 + __do_sys_finit_module+0x381/0x730 + do_syscall_64+0x8d/0x150 + entry_SYSCALL_64_after_hwframe+0x62/0x6a + handle: 42 + ... + cat /sys/kernel/debug/page_owner > page_owner_full.txt ./page_owner_sort page_owner_full.txt sorted_page_owner.txt diff --git a/Documentation/mm/process_addrs.rst b/Documentation/mm/process_addrs.rst index be49e2a269e473..7f2f3e87071df0 100644 --- a/Documentation/mm/process_addrs.rst +++ b/Documentation/mm/process_addrs.rst @@ -48,7 +48,8 @@ Terminology * **VMA locks** - The VMA lock is at VMA granularity (of course) which behaves as a read/write semaphore in practice. A VMA read lock is obtained via :c:func:`!lock_vma_under_rcu` (and unlocked via :c:func:`!vma_end_read`) and a - write lock via :c:func:`!vma_start_write` (all VMA write locks are unlocked + write lock via vma_start_write() or vma_start_write_killable() + (all VMA write locks are unlocked automatically when the mmap write lock is released). To take a VMA write lock you **must** have already acquired an :c:func:`!mmap_write_lock`. * **rmap locks** - When trying to access VMAs through the reverse mapping via a @@ -907,3 +908,9 @@ Stack expansion Stack expansion throws up additional complexities in that we cannot permit there to be racing page faults, as a result we invoke :c:func:`!vma_start_write` to prevent this in :c:func:`!expand_downwards` or :c:func:`!expand_upwards`. + +------------------------ +Functions and structures +------------------------ + +.. kernel-doc:: include/linux/mmap_lock.h diff --git a/Documentation/netlink/genetlink-c.yaml b/Documentation/netlink/genetlink-c.yaml index 5a234e9b5fa2ef..57f59fe23e3f8c 100644 --- a/Documentation/netlink/genetlink-c.yaml +++ b/Documentation/netlink/genetlink-c.yaml @@ -227,7 +227,7 @@ properties: Optional format indicator that is intended only for choosing the right formatting mechanism when displaying values of this type. - enum: [ hex, mac, fddi, ipv4, ipv6, uuid ] + enum: [ hex, mac, fddi, ipv4, ipv6, ipv4-or-v6, uuid ] # Start genetlink-c name-prefix: type: string diff --git a/Documentation/netlink/genetlink.yaml b/Documentation/netlink/genetlink.yaml index 7b1ec153e83490..b020a537d8acdb 100644 --- a/Documentation/netlink/genetlink.yaml +++ b/Documentation/netlink/genetlink.yaml @@ -185,7 +185,7 @@ properties: Optional format indicator that is intended only for choosing the right formatting mechanism when displaying values of this type. - enum: [ hex, mac, fddi, ipv4, ipv6, uuid ] + enum: [ hex, mac, fddi, ipv4, ipv6, ipv4-or-v6, uuid ] # Make sure name-prefix does not appear in subsets (subsets inherit naming) dependencies: diff --git a/Documentation/netlink/netlink-raw.yaml b/Documentation/netlink/netlink-raw.yaml index 246fa07bccf687..0166a7e4afbbf7 100644 --- a/Documentation/netlink/netlink-raw.yaml +++ b/Documentation/netlink/netlink-raw.yaml @@ -157,7 +157,7 @@ properties: Optional format indicator that is intended only for choosing the right formatting mechanism when displaying values of this type. - enum: [ hex, mac, fddi, ipv4, ipv6, uuid ] + enum: [ hex, mac, fddi, ipv4, ipv6, ipv4-or-v6, uuid ] struct: description: Name of the nested struct type. type: string diff --git a/Documentation/netlink/specs/conntrack.yaml b/Documentation/netlink/specs/conntrack.yaml index bef528633b1735..db7cddcda50afc 100644 --- a/Documentation/netlink/specs/conntrack.yaml +++ b/Documentation/netlink/specs/conntrack.yaml @@ -457,7 +457,7 @@ attribute-sets: name: labels type: binary - - name: labels mask + name: labels-mask type: binary - name: synproxy diff --git a/Documentation/netlink/specs/devlink.yaml b/Documentation/netlink/specs/devlink.yaml index 3db59c9658694b..837112da673807 100644 --- a/Documentation/netlink/specs/devlink.yaml +++ b/Documentation/netlink/specs/devlink.yaml @@ -99,6 +99,8 @@ definitions: name: legacy - name: switchdev + - + name: switchdev-inactive - type: enum name: eswitch-inline-mode @@ -857,6 +859,14 @@ attribute-sets: name: health-reporter-burst-period type: u64 doc: Time (in msec) for recoveries before starting the grace period. + + # TODO: fill in the attributes in between + + - + name: param-reset-default + type: flag + doc: Request restoring parameter to its default value. + value: 183 - name: dl-dev-stats subset-of: devlink @@ -1791,6 +1801,7 @@ operations: - param-type # param-value-data is missing here as the type is variable - param-value-cmode + - param-reset-default - name: region-get diff --git a/Documentation/netlink/specs/dpll.yaml b/Documentation/netlink/specs/dpll.yaml index 80728f6f9bc876..78d0724d7e12ce 100644 --- a/Documentation/netlink/specs/dpll.yaml +++ b/Documentation/netlink/specs/dpll.yaml @@ -440,6 +440,12 @@ attribute-sets: doc: | Capable pin provides list of pins that can be bound to create a reference-sync pin pair. + - + name: phase-adjust-gran + type: u32 + doc: | + Granularity of phase adjustment, in picoseconds. The value of + phase adjustment must be a multiple of this granularity. - name: pin-parent-device @@ -616,6 +622,7 @@ operations: - capabilities - parent-device - parent-pin + - phase-adjust-gran - phase-adjust-min - phase-adjust-max - phase-adjust diff --git a/Documentation/netlink/specs/em.yaml b/Documentation/netlink/specs/em.yaml new file mode 100644 index 00000000000000..9905ca482325d9 --- /dev/null +++ b/Documentation/netlink/specs/em.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) + +name: em + +doc: | + Energy model netlink interface to notify its changes. + +protocol: genetlink + +uapi-header: linux/energy_model.h + +attribute-sets: + - + name: pds + attributes: + - + name: pd + type: nest + nested-attributes: pd + multi-attr: true + - + name: pd + attributes: + - + name: pad + type: pad + - + name: pd-id + type: u32 + - + name: flags + type: u64 + - + name: cpus + type: string + - + name: pd-table + attributes: + - + name: pd-id + type: u32 + - + name: ps + type: nest + nested-attributes: ps + multi-attr: true + - + name: ps + attributes: + - + name: pad + type: pad + - + name: performance + type: u64 + - + name: frequency + type: u64 + - + name: power + type: u64 + - + name: cost + type: u64 + - + name: flags + type: u64 + +operations: + list: + - + name: get-pds + attribute-set: pds + doc: Get the list of information for all performance domains. + do: + reply: + attributes: + - pd + - + name: get-pd-table + attribute-set: pd-table + doc: Get the energy model table of a performance domain. + do: + request: + attributes: + - pd-id + reply: + attributes: + - pd-id + - ps + - + name: pd-created + doc: A performance domain is created. + notify: get-pd-table + mcgrp: event + - + name: pd-updated + doc: A performance domain is updated. + notify: get-pd-table + mcgrp: event + - + name: pd-deleted + doc: A performance domain is deleted. + attribute-set: pd-table + event: + attributes: + - pd-id + mcgrp: event + +mcast-groups: + list: + - + name: event diff --git a/Documentation/netlink/specs/ethtool.yaml b/Documentation/netlink/specs/ethtool.yaml index 6a0fb197451385..0a2d2343f79ac8 100644 --- a/Documentation/netlink/specs/ethtool.yaml +++ b/Documentation/netlink/specs/ethtool.yaml @@ -1269,7 +1269,7 @@ attribute-sets: - name: hist type: nest - multi-attr: True + multi-attr: true nested-attributes: fec-hist - name: fec @@ -1823,6 +1823,73 @@ attribute-sets: type: uint enum: pse-event doc: List of events reported by the PSE controller + - + name: mse-capabilities + doc: MSE capabilities attribute set + attr-cnt-name: --ethtool-a-mse-capabilities-cnt + attributes: + - + name: max-average-mse + type: uint + - + name: max-peak-mse + type: uint + - + name: refresh-rate-ps + type: uint + - + name: num-symbols + type: uint + - + name: mse-snapshot + doc: MSE snapshot attribute set + attr-cnt-name: --ethtool-a-mse-snapshot-cnt + attributes: + - + name: average-mse + type: uint + - + name: peak-mse + type: uint + - + name: worst-peak-mse + type: uint + - + name: mse + attr-cnt-name: --ethtool-a-mse-cnt + attributes: + - + name: header + type: nest + nested-attributes: header + - + name: capabilities + type: nest + nested-attributes: mse-capabilities + - + name: channel-a + type: nest + nested-attributes: mse-snapshot + - + name: channel-b + type: nest + nested-attributes: mse-snapshot + - + name: channel-c + type: nest + nested-attributes: mse-snapshot + - + name: channel-d + type: nest + nested-attributes: mse-snapshot + - + name: worst-channel + type: nest + nested-attributes: mse-snapshot + - + name: link + type: nest + nested-attributes: mse-snapshot operations: enum-model: directional @@ -2756,6 +2823,25 @@ operations: attributes: - header - context + - + name: mse-get + doc: Get PHY MSE measurement data and capabilities. + attribute-set: mse + do: &mse-get-op + request: + attributes: + - header + reply: + attributes: + - header + - capabilities + - channel-a + - channel-b + - channel-c + - channel-d + - worst-channel + - link + dump: *mse-get-op mcast-groups: list: diff --git a/Documentation/netlink/specs/netdev.yaml b/Documentation/netlink/specs/netdev.yaml index e00d3fa1c152d7..596c306ce52b83 100644 --- a/Documentation/netlink/specs/netdev.yaml +++ b/Documentation/netlink/specs/netdev.yaml @@ -88,7 +88,7 @@ definitions: - name: napi-threaded type: enum - entries: [disabled, enabled] + entries: [disabled, enabled, busy-poll] attribute-sets: - @@ -142,7 +142,7 @@ attribute-sets: name: ifindex doc: | ifindex of the netdev to which the pool belongs. - May be reported as 0 if the page pool was allocated for a netdev + May not be reported if the page pool was allocated for a netdev which got destroyed already (page pools may outlast their netdevs because they wait for all memory to be returned). type: u32 @@ -291,7 +291,8 @@ attribute-sets: name: threaded doc: Whether the NAPI is configured to operate in threaded polling mode. If this is set to enabled then the NAPI context operates - in threaded polling mode. + in threaded polling mode. If this is set to busy-poll, then the + threaded polling mode also busy polls. type: u32 enum: napi-threaded - @@ -600,7 +601,9 @@ operations: name: page-pool-get doc: | Get / dump information about Page Pools. - (Only Page Pools associated with a net_device can be listed.) + Only Page Pools associated by the driver with a net_device + can be listed. ifindex will not be reported if the net_device + no longer exists. attribute-set: page-pool do: request: @@ -732,6 +735,29 @@ operations: - rx-bytes - tx-packets - tx-bytes + - rx-alloc-fail + - rx-hw-drops + - rx-hw-drop-overruns + - rx-csum-complete + - rx-csum-unnecessary + - rx-csum-none + - rx-csum-bad + - rx-hw-gro-packets + - rx-hw-gro-bytes + - rx-hw-gro-wire-packets + - rx-hw-gro-wire-bytes + - rx-hw-drop-ratelimits + - tx-hw-drops + - tx-hw-drop-errors + - tx-csum-none + - tx-needs-csum + - tx-hw-gso-packets + - tx-hw-gso-bytes + - tx-hw-gso-wire-packets + - tx-hw-gso-wire-bytes + - tx-hw-drop-ratelimits + - tx-stop + - tx-wake - name: bind-rx doc: Bind dmabuf to netdev diff --git a/Documentation/netlink/specs/nftables.yaml b/Documentation/netlink/specs/nftables.yaml index cce88819ba7165..17ad707fa0d5dc 100644 --- a/Documentation/netlink/specs/nftables.yaml +++ b/Documentation/netlink/specs/nftables.yaml @@ -915,7 +915,7 @@ attribute-sets: type: string doc: Name of set to use - - name: set id + name: set-id type: u32 byte-order: big-endian doc: ID of set to use diff --git a/Documentation/netlink/specs/psp.yaml b/Documentation/netlink/specs/psp.yaml index 944429e5c9a840..f3a57782d2cf4a 100644 --- a/Documentation/netlink/specs/psp.yaml +++ b/Documentation/netlink/specs/psp.yaml @@ -76,6 +76,83 @@ attribute-sets: name: spi doc: Security Parameters Index (SPI) of the association. type: u32 + - + name: stats + attributes: + - + name: dev-id + doc: PSP device ID. + type: u32 + checks: + min: 1 + - + name: key-rotations + type: uint + doc: | + Number of key rotations during the lifetime of the device. + Kernel statistic. + - + name: stale-events + type: uint + doc: | + Number of times a socket's Rx got shut down due to using + a key which went stale (fully rotated out). + Kernel statistic. + - + name: rx-packets + type: uint + doc: | + Number of successfully processed and authenticated PSP packets. + Device statistic (from the PSP spec). + - + name: rx-bytes + type: uint + doc: | + Number of successfully authenticated PSP bytes received, counting from + the first byte after the IV through the last byte of payload. + The fixed initial portion of the PSP header (16 bytes) + and the PSP trailer/ICV (16 bytes) are not included in this count. + Device statistic (from the PSP spec). + - + name: rx-auth-fail + type: uint + doc: | + Number of received PSP packets with unsuccessful authentication. + Device statistic (from the PSP spec). + - + name: rx-error + type: uint + doc: | + Number of received PSP packets with length/framing errors. + Device statistic (from the PSP spec). + - + name: rx-bad + type: uint + doc: | + Number of received PSP packets with miscellaneous errors + (invalid master key indicated by SPI, unsupported version, etc.) + Device statistic (from the PSP spec). + - + name: tx-packets + type: uint + doc: | + Number of successfully processed PSP packets for transmission. + Device statistic (from the PSP spec). + - + name: tx-bytes + type: uint + doc: | + Number of successfully processed PSP bytes for transmit, counting from + the first byte after the IV through the last byte of payload. + The fixed initial portion of the PSP header (16 bytes) + and the PSP trailer/ICV (16 bytes) are not included in this count. + Device statistic (from the PSP spec). + - + name: tx-error + type: uint + doc: | + Number of PSP packets for transmission with errors. + Device statistic (from the PSP spec). operations: list: @@ -177,6 +254,24 @@ operations: pre: psp-assoc-device-get-locked post: psp-device-unlock + - + name: get-stats + doc: Get device statistics. + attribute-set: stats + do: + request: + attributes: + - dev-id + reply: &stats-all + attributes: + - dev-id + - key-rotations + - stale-events + pre: psp-device-get-locked + post: psp-device-unlock + dump: + reply: *stats-all + mcast-groups: list: - diff --git a/Documentation/netlink/specs/rt-addr.yaml b/Documentation/netlink/specs/rt-addr.yaml index 3a582eac1629ee..163a106c41bb45 100644 --- a/Documentation/netlink/specs/rt-addr.yaml +++ b/Documentation/netlink/specs/rt-addr.yaml @@ -86,17 +86,18 @@ attribute-sets: - name: address type: binary - display-hint: ipv4 + display-hint: ipv4-or-v6 - name: local type: binary - display-hint: ipv4 + display-hint: ipv4-or-v6 - name: label type: string - name: broadcast - type: binary + type: u32 + byte-order: big-endian display-hint: ipv4 - name: anycast diff --git a/Documentation/netlink/specs/rt-link.yaml b/Documentation/netlink/specs/rt-link.yaml index 2a23e9699c0b60..6beeb6ee5adf10 100644 --- a/Documentation/netlink/specs/rt-link.yaml +++ b/Documentation/netlink/specs/rt-link.yaml @@ -1707,11 +1707,11 @@ attribute-sets: - name: local type: binary - display-hint: ipv4 + display-hint: ipv4-or-v6 - name: remote type: binary - display-hint: ipv4 + display-hint: ipv4-or-v6 - name: ttl type: u8 @@ -1833,11 +1833,11 @@ attribute-sets: - name: local type: binary - display-hint: ipv4 + display-hint: ipv4-or-v6 - name: remote type: binary - display-hint: ipv4 + display-hint: ipv4-or-v6 - name: fwmark type: u32 @@ -1868,7 +1868,8 @@ attribute-sets: type: u32 - name: remote - type: binary + type: u32 + byte-order: big-endian display-hint: ipv4 - name: ttl @@ -1913,6 +1914,35 @@ attribute-sets: name: port-range type: binary struct: ifla-geneve-port-range + - + name: linkinfo-hsr-attrs + name-prefix: ifla-hsr- + attributes: + - + name: slave1 + type: u32 + - + name: slave2 + type: u32 + - + name: multicast-spec + type: u8 + - + name: supervision-addr + type: binary + display-hint: mac + - + name: seq-nr + type: u16 + - + name: version + type: u8 + - + name: protocol + type: u8 + - + name: interlink + type: u32 - name: linkinfo-iptun-attrs name-prefix: ifla-iptun- @@ -1923,11 +1953,11 @@ attribute-sets: - name: local type: binary - display-hint: ipv4 + display-hint: ipv4-or-v6 - name: remote type: binary - display-hint: ipv4 + display-hint: ipv4-or-v6 - name: ttl type: u8 @@ -1957,7 +1987,8 @@ attribute-sets: display-hint: ipv6 - name: 6rd-relay-prefix - type: binary + type: u32 + byte-order: big-endian display-hint: ipv4 - name: 6rd-prefixlen @@ -2299,6 +2330,9 @@ sub-messages: - value: geneve attribute-set: linkinfo-geneve-attrs + - + value: hsr + attribute-set: linkinfo-hsr-attrs - value: ipip attribute-set: linkinfo-iptun-attrs diff --git a/Documentation/netlink/specs/rt-neigh.yaml b/Documentation/netlink/specs/rt-neigh.yaml index 2f568a6231c930..0f46ef3135905d 100644 --- a/Documentation/netlink/specs/rt-neigh.yaml +++ b/Documentation/netlink/specs/rt-neigh.yaml @@ -194,7 +194,7 @@ attribute-sets: - name: dst type: binary - display-hint: ipv4 + display-hint: ipv4-or-v6 - name: lladdr type: binary diff --git a/Documentation/netlink/specs/rt-route.yaml b/Documentation/netlink/specs/rt-route.yaml index 1ecb3fadc0679f..33195db96746c6 100644 --- a/Documentation/netlink/specs/rt-route.yaml +++ b/Documentation/netlink/specs/rt-route.yaml @@ -87,11 +87,11 @@ attribute-sets: - name: dst type: binary - display-hint: ipv4 + display-hint: ipv4-or-v6 - name: src type: binary - display-hint: ipv4 + display-hint: ipv4-or-v6 - name: iif type: u32 @@ -101,14 +101,14 @@ attribute-sets: - name: gateway type: binary - display-hint: ipv4 + display-hint: ipv4-or-v6 - name: priority type: u32 - name: prefsrc type: binary - display-hint: ipv4 + display-hint: ipv4-or-v6 - name: metrics type: nest diff --git a/Documentation/netlink/specs/rt-rule.yaml b/Documentation/netlink/specs/rt-rule.yaml index bebee452a95073..7f03a44ab0361e 100644 --- a/Documentation/netlink/specs/rt-rule.yaml +++ b/Documentation/netlink/specs/rt-rule.yaml @@ -96,10 +96,12 @@ attribute-sets: attributes: - name: dst - type: u32 + type: binary + display-hint: ipv4-or-v6 - name: src - type: u32 + type: binary + display-hint: ipv4-or-v6 - name: iifname type: string diff --git a/Documentation/netlink/specs/wireguard.yaml b/Documentation/netlink/specs/wireguard.yaml new file mode 100644 index 00000000000000..30479fc6bb697d --- /dev/null +++ b/Documentation/netlink/specs/wireguard.yaml @@ -0,0 +1,298 @@ +# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) +--- +name: wireguard +protocol: genetlink-legacy + +doc: | + **Netlink protocol to control WireGuard network devices.** + + The below enums and macros are for interfacing with WireGuard, using generic + netlink, with family ``WG_GENL_NAME`` and version ``WG_GENL_VERSION``. It + defines two commands: get and set. Note that while they share many common + attributes, these two commands actually accept a slightly different set of + inputs and outputs. These differences are noted under the individual + attributes. +c-family-name: wg-genl-name +c-version-name: wg-genl-version +max-by-define: true + +definitions: + - + name-prefix: wg- + name: key-len + type: const + value: 32 + - + name: --kernel-timespec + type: struct + header: linux/time_types.h + members: + - + name: sec + type: u64 + doc: Number of seconds, since UNIX epoch. + - + name: nsec + type: u64 + doc: Number of nanoseconds, after the second began. + - + name: wgdevice-flags + name-prefix: wgdevice-f- + enum-name: wgdevice-flag + type: flags + entries: + - replace-peers + - + name: wgpeer-flags + name-prefix: wgpeer-f- + enum-name: wgpeer-flag + type: flags + entries: + - remove-me + - replace-allowedips + - update-only + - + name: wgallowedip-flags + name-prefix: wgallowedip-f- + enum-name: wgallowedip-flag + type: flags + entries: + - remove-me + +attribute-sets: + - + name: wgdevice + enum-name: wgdevice-attribute + name-prefix: wgdevice-a- + attr-cnt-name: --wgdevice-a-last + attributes: + - + name: unspec + type: unused + value: 0 + - + name: ifindex + type: u32 + - + name: ifname + type: string + checks: + max-len: 15 + - + name: private-key + type: binary + doc: Set to all zeros to remove. + display-hint: hex + checks: + exact-len: wg-key-len + - + name: public-key + type: binary + display-hint: hex + checks: + exact-len: wg-key-len + - + name: flags + type: u32 + doc: | + ``0`` or ``WGDEVICE_F_REPLACE_PEERS`` if all current peers should be + removed prior to adding the list below. + enum: wgdevice-flags + - + name: listen-port + type: u16 + doc: Set as ``0`` to choose randomly. + - + name: fwmark + type: u32 + doc: Set as ``0`` to disable. + - + name: peers + type: indexed-array + sub-type: nest + nested-attributes: wgpeer + doc: | + The index/type parameter is unused on ``SET_DEVICE`` operations and is + zero on ``GET_DEVICE`` operations. + - + name: wgpeer + enum-name: wgpeer-attribute + name-prefix: wgpeer-a- + attr-cnt-name: --wgpeer-a-last + attributes: + - + name: unspec + type: unused + value: 0 + - + name: public-key + type: binary + display-hint: hex + checks: + exact-len: wg-key-len + - + name: preshared-key + type: binary + doc: Set as all zeros to remove. + display-hint: hex + checks: + exact-len: wg-key-len + - + name: flags + type: u32 + doc: | + ``0`` and/or ``WGPEER_F_REMOVE_ME`` if the specified peer should not + exist at the end of the operation, rather than added/updated and/or + ``WGPEER_F_REPLACE_ALLOWEDIPS`` if all current allowed IPs of this + peer should be removed prior to adding the list below and/or + ``WGPEER_F_UPDATE_ONLY`` if the peer should only be set if it already + exists. + enum: wgpeer-flags + - + name: endpoint + type: binary + doc: struct sockaddr_in or struct sockaddr_in6 + checks: + min-len: 16 + - + name: persistent-keepalive-interval + type: u16 + doc: Set as ``0`` to disable. + - + name: last-handshake-time + type: binary + struct: --kernel-timespec + checks: + exact-len: 16 + - + name: rx-bytes + type: u64 + - + name: tx-bytes + type: u64 + - + name: allowedips + type: indexed-array + sub-type: nest + nested-attributes: wgallowedip + doc: | + The index/type parameter is unused on ``SET_DEVICE`` operations and is + zero on ``GET_DEVICE`` operations. + - + name: protocol-version + type: u32 + doc: | + Should not be set or used at all by most users of this API, as the + most recent protocol will be used when this is unset. Otherwise, + must be set to ``1``. + - + name: wgallowedip + enum-name: wgallowedip-attribute + name-prefix: wgallowedip-a- + attr-cnt-name: --wgallowedip-a-last + attributes: + - + name: unspec + type: unused + value: 0 + - + name: family + type: u16 + doc: IP family, either ``AF_INET`` or ``AF_INET6``. + - + name: ipaddr + type: binary + doc: Either ``struct in_addr`` or ``struct in6_addr``. + display-hint: ipv4-or-v6 + checks: + min-len: 4 + - + name: cidr-mask + type: u8 + - + name: flags + type: u32 + doc: | + ``WGALLOWEDIP_F_REMOVE_ME`` if the specified IP should be removed; + otherwise, this IP will be added if it is not already present. + enum: wgallowedip-flags + +operations: + enum-name: wg-cmd + name-prefix: wg-cmd- + list: + - + name: get-device + value: 0 + doc: | + Retrieve WireGuard device + ~~~~~~~~~~~~~~~~~~~~~~~~~ + + The command should be called with one but not both of: + + - ``WGDEVICE_A_IFINDEX`` + - ``WGDEVICE_A_IFNAME`` + + The kernel will then return several messages (``NLM_F_MULTI``). It is + possible that all of the allowed IPs of a single peer will not fit + within a single netlink message. In that case, the same peer will be + written in the following message, except it will only contain + ``WGPEER_A_PUBLIC_KEY`` and ``WGPEER_A_ALLOWEDIPS``. This may occur + several times in a row for the same peer. It is then up to the receiver + to coalesce adjacent peers. Likewise, it is possible that all peers will + not fit within a single message. So, subsequent peers will be sent in + following messages, except those will only contain ``WGDEVICE_A_IFNAME`` + and ``WGDEVICE_A_PEERS``. It is then up to the receiver to coalesce + these messages to form the complete list of peers. + + Since this is an ``NLA_F_DUMP`` command, the final message will always + be ``NLMSG_DONE``, even if an error occurs. However, this ``NLMSG_DONE`` + message contains an integer error code. It is either zero or a negative + error code corresponding to the errno. + attribute-set: wgdevice + flags: [uns-admin-perm] + + dump: + pre: wg-get-device-start + post: wg-get-device-done + request: + attributes: + - ifindex + - ifname + reply: &all-attrs + attributes: + - ifindex + - ifname + - private-key + - public-key + - flags + - listen-port + - fwmark + - peers + - + name: set-device + value: 1 + doc: | + Set WireGuard device + ~~~~~~~~~~~~~~~~~~~~ + + This command should be called with a wgdevice set, containing one but + not both of ``WGDEVICE_A_IFINDEX`` and ``WGDEVICE_A_IFNAME``. + + It is possible that the amount of configuration data exceeds that of the + maximum message length accepted by the kernel. In that case, several + messages should be sent one after another, with each successive one + filling in information not contained in the prior. Note that if + ``WGDEVICE_F_REPLACE_PEERS`` is specified in the first message, it + probably should not be specified in fragments that come after, so that + the list of peers is only cleared the first time but appended after. + Likewise for peers, if ``WGPEER_F_REPLACE_ALLOWEDIPS`` is specified in + the first message of a peer, it likely should not be specified in + subsequent fragments. + + If an error occurs, ``NLMSG_ERROR`` will reply containing an errno. + attribute-set: wgdevice + flags: [uns-admin-perm] + + do: + request: *all-attrs diff --git a/Documentation/networking/6pack.rst b/Documentation/networking/6pack.rst index bc5bf1f1a98fb7..66d5fd4fc82128 100644 --- a/Documentation/networking/6pack.rst +++ b/Documentation/networking/6pack.rst @@ -94,7 +94,7 @@ kernels may lead to a compilation error because the interface to a kernel function has been changed in the 2.1.8x kernels. How to turn on 6pack support: -============================= +----------------------------- - In the linux kernel configuration program, select the code maturity level options menu and turn on the prompting for development drivers. diff --git a/Documentation/networking/arcnet-hardware.rst b/Documentation/networking/arcnet-hardware.rst index 3bf7f99cd7bbf0..20e5075d0d0e7d 100644 --- a/Documentation/networking/arcnet-hardware.rst +++ b/Documentation/networking/arcnet-hardware.rst @@ -4,18 +4,20 @@ ARCnet Hardware =============== +:Author: Avery Pennarun + .. note:: - 1) This file is a supplement to arcnet.txt. Please read that for general + 1) This file is a supplement to arcnet.rst. Please read that for general driver configuration help. 2) This file is no longer Linux-specific. It should probably be moved out of the kernel sources. Ideas? Because so many people (myself included) seem to have obtained ARCnet cards without manuals, this file contains a quick introduction to ARCnet hardware, -some cabling tips, and a listing of all jumper settings I can find. Please -e-mail apenwarr@worldvisions.ca with any settings for your particular card, -or any other information you have! +some cabling tips, and a listing of all jumper settings I can find. If you +have any settings for your particular card, and/or any other information you +have, do not hesitate to :ref:`email to netdev `. Introduction to ARCnet @@ -72,11 +74,10 @@ level of encapsulation is defined by RFC1201, which I call "packet splitting," that allows "virtual packets" to grow as large as 64K each, although they are generally kept down to the Ethernet-style 1500 bytes. -For more information on the advantages and disadvantages (mostly the -advantages) of ARCnet networks, you might try the "ARCnet Trade Association" -WWW page: +For more information on ARCnet networks, visit the "ARCNET Resource Center" +WWW page at: - http://www.arcnet.com + https://www.arcnet.cc Cabling ARCnet Networks @@ -3226,9 +3227,6 @@ Settings for IRQ Selection (Lower Jumper Line) Other Cards =========== -I have no information on other models of ARCnet cards at the moment. Please -send any and all info to: - - apenwarr@worldvisions.ca +I have no information on other models of ARCnet cards at the moment. Thanks. diff --git a/Documentation/networking/arcnet.rst b/Documentation/networking/arcnet.rst index 82fce606c0f0bc..cd43a18ad1494b 100644 --- a/Documentation/networking/arcnet.rst +++ b/Documentation/networking/arcnet.rst @@ -4,6 +4,8 @@ ARCnet ====== +:Author: Avery Pennarun + .. note:: See also arcnet-hardware.txt in this directory for jumper-setting @@ -30,18 +32,7 @@ Come on, be a sport! Send me a success report! (hey, that was even better than my original poem... this is getting bad!) - -.. warning:: - - If you don't e-mail me about your success/failure soon, I may be forced to - start SINGING. And we don't want that, do we? - - (You know, it might be argued that I'm pushing this point a little too much. - If you think so, why not flame me in a quick little e-mail? Please also - include the type of card(s) you're using, software, size of network, and - whether it's working or not.) - - My e-mail address is: apenwarr@worldvisions.ca +---- These are the ARCnet drivers for Linux. @@ -59,23 +50,14 @@ ARCnet 2.10 ALPHA, Tomasz's all-new-and-improved RFC1051 support has been included and seems to be working fine! +.. _arcnet-netdev: + Where do I discuss these drivers? --------------------------------- -Tomasz has been so kind as to set up a new and improved mailing list. -Subscribe by sending a message with the BODY "subscribe linux-arcnet YOUR -REAL NAME" to listserv@tichy.ch.uj.edu.pl. Then, to submit messages to the -list, mail to linux-arcnet@tichy.ch.uj.edu.pl. - -There are archives of the mailing list at: - - http://epistolary.org/mailman/listinfo.cgi/arcnet - -The people on linux-net@vger.kernel.org (now defunct, replaced by -netdev@vger.kernel.org) have also been known to be very helpful, especially -when we're talking about ALPHA Linux kernels that may or may not work right -in the first place. - +ARCnet discussions take place on netdev. Simply send your email to +netdev@vger.kernel.org and make sure to Cc: maintainer listed in +"ARCNET NETWORK LAYER" heading of Documentation/process/maintainers.rst. Other Drivers and Info ---------------------- @@ -523,17 +505,9 @@ can set up your network then: It works: what now? ------------------- -Send mail describing your setup, preferably including driver version, kernel -version, ARCnet card model, CPU type, number of systems on your network, and -list of software in use to me at the following address: - - apenwarr@worldvisions.ca - -I do send (sometimes automated) replies to all messages I receive. My email -can be weird (and also usually gets forwarded all over the place along the -way to me), so if you don't get a reply within a reasonable time, please -resend. - +Send mail following :ref:`arcnet-netdev`. Describe your setup, preferably +including driver version, kernel version, ARCnet card model, CPU type, number +of systems on your network, and list of software in use. It doesn't work: what now? -------------------------- diff --git a/Documentation/networking/device_drivers/cellular/qualcomm/rmnet.rst b/Documentation/networking/device_drivers/cellular/qualcomm/rmnet.rst index 6877a326058206..5aedbabb738277 100644 --- a/Documentation/networking/device_drivers/cellular/qualcomm/rmnet.rst +++ b/Documentation/networking/device_drivers/cellular/qualcomm/rmnet.rst @@ -28,6 +28,7 @@ these MAP frames and send them to appropriate PDN's. ================ a. MAP packet v1 (data / control) +--------------------------------- MAP header fields are in big endian format. @@ -54,6 +55,7 @@ Payload length includes the padding length but does not include MAP header length. b. Map packet v4 (data / control) +--------------------------------- MAP header fields are in big endian format. @@ -107,6 +109,7 @@ over which checksum is computed. Checksum value, indicates the checksum computed. c. MAP packet v5 (data / control) +--------------------------------- MAP header fields are in big endian format. @@ -134,6 +137,7 @@ Payload length includes the padding length but does not include MAP header length. d. Checksum offload header v5 +----------------------------- Checksum offload header fields are in big endian format. @@ -158,7 +162,10 @@ indicates that the calculated packet checksum is invalid. Reserved bits must be zero when sent and ignored when received. -e. MAP packet v1/v5 (command specific):: +e. MAP packet v1/v5 (command specific) +-------------------------------------- + +Packet format:: Bit 0 1 2-7 8 - 15 16 - 31 Function Command Reserved Pad Multiplexer ID Payload length @@ -181,6 +188,7 @@ Command types = ========================================== f. Aggregation +-------------- Aggregation is multiple MAP packets (can be data or command) delivered to rmnet in a single linear skb. rmnet will process the individual diff --git a/Documentation/networking/device_drivers/ethernet/index.rst b/Documentation/networking/device_drivers/ethernet/index.rst index 7cfcd183054f84..bcc02355f828bc 100644 --- a/Documentation/networking/device_drivers/ethernet/index.rst +++ b/Documentation/networking/device_drivers/ethernet/index.rst @@ -47,6 +47,7 @@ Contents: mellanox/mlx5/index meta/fbnic microsoft/netvsc + mucse/rnpgbe neterion/s2io netronome/nfp pensando/ionic diff --git a/Documentation/networking/device_drivers/ethernet/mucse/rnpgbe.rst b/Documentation/networking/device_drivers/ethernet/mucse/rnpgbe.rst new file mode 100644 index 00000000000000..d35cf8a46b6cd2 --- /dev/null +++ b/Documentation/networking/device_drivers/ethernet/mucse/rnpgbe.rst @@ -0,0 +1,17 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=========================================================== +Linux Base Driver for MUCSE(R) Gigabit PCI Express Adapters +=========================================================== + +Contents +======== + +- Identifying Your Adapter + +Identifying Your Adapter +======================== +The driver is compatible with devices based on the following: + + * MUCSE(R) Ethernet Controller N210 series + * MUCSE(R) Ethernet Controller N500 series diff --git a/Documentation/networking/devlink/devlink-eswitch-attr.rst b/Documentation/networking/devlink/devlink-eswitch-attr.rst index 08bb39ab152864..eafe09abc40c2e 100644 --- a/Documentation/networking/devlink/devlink-eswitch-attr.rst +++ b/Documentation/networking/devlink/devlink-eswitch-attr.rst @@ -39,6 +39,10 @@ The following is a list of E-Switch attributes. rules. * ``switchdev`` allows for more advanced offloading capabilities of the E-Switch to hardware. + * ``switchdev_inactive`` switchdev mode but starts inactive, doesn't allow traffic + until explicitly activated. This mode is useful for orchestrators that + want to prepare the device in switchdev mode but only activate it when + all configurations are done. * - ``inline-mode`` - enum - Some HWs need the VF driver to put part of the packet @@ -74,3 +78,12 @@ Example Usage # enable encap-mode with legacy mode $ devlink dev eswitch set pci/0000:08:00.0 mode legacy inline-mode none encap-mode basic + + # start switchdev mode in inactive state + $ devlink dev eswitch set pci/0000:08:00.0 mode switchdev_inactive + + # setup switchdev configurations, representors, FDB entries, etc.. + ... + + # activate switchdev mode to allow traffic + $ devlink dev eswitch set pci/0000:08:00.0 mode switchdev diff --git a/Documentation/networking/devlink/devlink-params.rst b/Documentation/networking/devlink/devlink-params.rst index 0a9c20d701225c..ea17756dcda6d3 100644 --- a/Documentation/networking/devlink/devlink-params.rst +++ b/Documentation/networking/devlink/devlink-params.rst @@ -41,6 +41,16 @@ In order for ``driverinit`` parameters to take effect, the driver must support reloading via the ``devlink-reload`` command. This command will request a reload of the device driver. +Default parameter values +========================= + +Drivers may optionally export default values for parameters of cmode +``runtime`` and ``permanent``. For ``driverinit`` parameters, the last +value set by the driver will be used as the default value. Drivers can +also support resetting params with cmode ``runtime`` and ``permanent`` +to their default values. Resetting ``driverinit`` params is supported +by devlink core without additional driver support needed. + .. _devlink_params_generic: Generic configuration parameters @@ -151,3 +161,7 @@ own name. * - ``num_doorbells`` - u32 - Controls the number of doorbells used by the device. + * - ``max_mac_per_vf`` + - u32 + - Controls the maximum number of MAC address filters that can be assigned + to a Virtual Function (VF). diff --git a/Documentation/networking/devlink/i40e.rst b/Documentation/networking/devlink/i40e.rst index d3cb5bb5197e96..51c887f0dc833b 100644 --- a/Documentation/networking/devlink/i40e.rst +++ b/Documentation/networking/devlink/i40e.rst @@ -7,6 +7,40 @@ i40e devlink support This document describes the devlink features implemented by the ``i40e`` device driver. +Parameters +========== + +.. list-table:: Generic parameters implemented + :widths: 5 5 90 + + * - Name + - Mode + - Notes + * - ``max_mac_per_vf`` + - runtime + - Controls the maximum number of MAC addresses a VF can use + on i40e devices. + + By default (``0``), the driver enforces its internally calculated per-VF + MAC filter limit, which is based on the number of allocated VFS. + + If set to a non-zero value, this parameter acts as a strict cap: + the driver will use the user-provided value instead of its internal + calculation. + + **Important notes:** + + - This value **must be set before enabling SR-IOV**. + Attempting to change it while SR-IOV is enabled will return an error. + - MAC filters are a **shared hardware resource** across all VFs. + Setting a high value may cause other VFs to be starved of filters. + - This value is a **Administrative policy**. The hardware may return + errors when its absolute limit is reached, regardless of the value + set here. + + The default value is ``0`` (internal calculation is used). + + Info versions ============= diff --git a/Documentation/networking/devlink/index.rst b/Documentation/networking/devlink/index.rst index 0c58e5c729d927..35b12a2bfeba57 100644 --- a/Documentation/networking/devlink/index.rst +++ b/Documentation/networking/devlink/index.rst @@ -99,5 +99,6 @@ parameters, info versions, and other features it supports. prestera qed sfc + stmmac ti-cpsw-switch zl3073x diff --git a/Documentation/networking/devlink/mlx5.rst b/Documentation/networking/devlink/mlx5.rst index 0e5f9c76e51418..4bba4d780a4ae8 100644 --- a/Documentation/networking/devlink/mlx5.rst +++ b/Documentation/networking/devlink/mlx5.rst @@ -218,6 +218,20 @@ parameters. * ``balanced`` : Merges fewer CQEs, resulting in a moderate compression ratio but maintaining a balance between bandwidth savings and performance * ``aggressive`` : Merges more CQEs into a single entry, achieving a higher compression rate and maximizing performance, particularly under high traffic loads + * - ``swp_l4_csum_mode`` + - string + - permanent + - Configure how the L4 checksum is calculated by the device when using + Software Parser (SWP) hints for header locations. + + * ``default`` : Use the device's default checksum calculation + mode. The driver will discover during init whether or + full_csum or l4_only is in use. Setting this value explicitly + from userspace is not allowed, but some firmware versions may + return this value on param read. + * ``full_csum`` : Calculate full checksum including the pseudo-header + * ``l4_only`` : Calculate L4-only checksum, excluding the pseudo-header + The ``mlx5`` driver supports reloading via ``DEVLINK_CMD_RELOAD`` Info versions diff --git a/Documentation/networking/devlink/stmmac.rst b/Documentation/networking/devlink/stmmac.rst new file mode 100644 index 00000000000000..47e3ff10bc0825 --- /dev/null +++ b/Documentation/networking/devlink/stmmac.rst @@ -0,0 +1,40 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================================= +stmmac (synopsys dwmac) devlink support +======================================= + +This document describes the devlink features implemented by the ``stmmac`` +device driver. + +Parameters +========== + +The ``stmmac`` driver implements the following driver-specific parameters. + +.. list-table:: Driver-specific parameters implemented + :widths: 5 5 5 85 + + * - Name + - Type + - Mode + - Description + * - ``phc_coarse_adj`` + - Boolean + - runtime + - Enable the Coarse timestamping mode, as defined in the DWMAC TRM. + A detailed explanation of this timestamping mode can be found in the + Socfpga Functionnal Description [1]. + + In Coarse mode, the ptp clock is expected to be fed by a high-precision + clock that is externally adjusted, and the subsecond increment used for + timestamping is set to 1/ptp_clock_rate. + + In Fine mode (i.e. Coarse mode == false), the ptp clock frequency is + continuously adjusted, but the subsecond increment is set to + 2/ptp_clock_rate. + + Coarse mode is suitable for PTP Grand Master operation. If unsure, leave + the parameter to False. + + [1] https://www.intel.com/content/www/us/en/docs/programmable/683126/21-2/functional-description-of-the-emac.html diff --git a/Documentation/networking/dsa/dsa.rst b/Documentation/networking/dsa/dsa.rst index 7b2e69cd7ef0b9..5c79740a533bbf 100644 --- a/Documentation/networking/dsa/dsa.rst +++ b/Documentation/networking/dsa/dsa.rst @@ -1104,12 +1104,11 @@ health of the network and for discovery of other nodes. In Linux, both HSR and PRP are implemented in the hsr driver, which instantiates a virtual, stackable network interface with two member ports. The driver only implements the basic roles of DANH (Doubly Attached Node -implementing HSR) and DANP (Doubly Attached Node implementing PRP); the roles -of RedBox and QuadBox are not implemented (therefore, bridging a hsr network -interface with a physical switch port does not produce the expected result). +implementing HSR), DANP (Doubly Attached Node implementing PRP) and RedBox +(allows non-HSR devices to connect to the ring via Interlink ports). -A driver which is able of offloading certain functions of a DANP or DANH should -declare the corresponding netdev features as indicated by the documentation at +A driver which is able of offloading certain functions should declare the +corresponding netdev features as indicated by the documentation at ``Documentation/networking/netdev-features.rst``. Additionally, the following methods must be implemented: @@ -1120,6 +1119,14 @@ methods must be implemented: - ``port_hsr_leave``: function invoked when a given switch port leaves a DANP/DANH and returns to normal operation as a standalone port. +Note that the ``NETIF_F_HW_HSR_DUP`` feature relies on transmission towards +multiple ports, which is generally available whenever the tagging protocol uses +the ``dsa_xmit_port_mask()`` helper function. If the helper is used, the HSR +offload feature should also be set. The ``dsa_port_simple_hsr_join()`` and +``dsa_port_simple_hsr_leave()`` methods can be used as generic implementations +of ``port_hsr_join`` and ``port_hsr_leave``, if this is the only supported +offload feature. + TODO ==== diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst index b270886c5f5d54..af56c304cef43a 100644 --- a/Documentation/networking/ethtool-netlink.rst +++ b/Documentation/networking/ethtool-netlink.rst @@ -242,6 +242,7 @@ Userspace to kernel: ``ETHTOOL_MSG_RSS_SET`` set RSS settings ``ETHTOOL_MSG_RSS_CREATE_ACT`` create an additional RSS context ``ETHTOOL_MSG_RSS_DELETE_ACT`` delete an additional RSS context + ``ETHTOOL_MSG_MSE_GET`` get MSE diagnostic data ===================================== ================================= Kernel to userspace: @@ -299,6 +300,7 @@ Kernel to userspace: ``ETHTOOL_MSG_RSS_CREATE_ACT_REPLY`` create an additional RSS context ``ETHTOOL_MSG_RSS_CREATE_NTF`` additional RSS context created ``ETHTOOL_MSG_RSS_DELETE_NTF`` additional RSS context deleted + ``ETHTOOL_MSG_MSE_GET_REPLY`` MSE diagnostic data ======================================== ================================= ``GET`` requests are sent by userspace applications to retrieve device @@ -2458,6 +2460,68 @@ Kernel response contents: For a description of each attribute, see ``TSCONFIG_GET``. +MSE_GET +======= + +Retrieves detailed Mean Square Error (MSE) diagnostic information from the PHY. + +Request Contents: + + ==================================== ====== ============================ + ``ETHTOOL_A_MSE_HEADER`` nested request header + ==================================== ====== ============================ + +Kernel Response Contents: + + ==================================== ====== ================================ + ``ETHTOOL_A_MSE_HEADER`` nested reply header + ``ETHTOOL_A_MSE_CAPABILITIES`` nested capability/scale info for MSE + measurements + ``ETHTOOL_A_MSE_CHANNEL_A`` nested snapshot for Channel A + ``ETHTOOL_A_MSE_CHANNEL_B`` nested snapshot for Channel B + ``ETHTOOL_A_MSE_CHANNEL_C`` nested snapshot for Channel C + ``ETHTOOL_A_MSE_CHANNEL_D`` nested snapshot for Channel D + ``ETHTOOL_A_MSE_WORST_CHANNEL`` nested snapshot for worst channel + ``ETHTOOL_A_MSE_LINK`` nested snapshot for link-wide aggregate + ==================================== ====== ================================ + +MSE Capabilities +---------------- + +This nested attribute reports the capability / scaling properties used to +interpret snapshot values. + + ============================================== ====== ========================= + ``ETHTOOL_A_MSE_CAPABILITIES_MAX_AVERAGE_MSE`` uint max avg_mse scale + ``ETHTOOL_A_MSE_CAPABILITIES_MAX_PEAK_MSE`` uint max peak_mse scale + ``ETHTOOL_A_MSE_CAPABILITIES_REFRESH_RATE_PS`` uint sample rate (picoseconds) + ``ETHTOOL_A_MSE_CAPABILITIES_NUM_SYMBOLS`` uint symbols per HW sample + ============================================== ====== ========================= + +The max-average/peak fields are included only if the corresponding metric +is supported by the PHY. Their absence indicates that the metric is not +available. + +See ``struct phy_mse_capability`` kernel documentation in +``include/linux/phy.h``. + +MSE Snapshot +------------ + +Each per-channel nest contains an atomic snapshot of MSE values for that +selector (channel A/B/C/D, worst channel, or link). + + ========================================== ====== =================== + ``ETHTOOL_A_MSE_SNAPSHOT_AVERAGE_MSE`` uint average MSE value + ``ETHTOOL_A_MSE_SNAPSHOT_PEAK_MSE`` uint current peak MSE + ``ETHTOOL_A_MSE_SNAPSHOT_WORST_PEAK_MSE`` uint worst-case peak MSE + ========================================== ====== =================== + +Within each channel nest, only the metrics supported by the PHY will be present. + +See ``struct phy_mse_snapshot`` kernel documentation in +``include/linux/phy.h``. + Request translation =================== diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst index c775cababc8c17..75db2251649b85 100644 --- a/Documentation/networking/index.rst +++ b/Documentation/networking/index.rst @@ -131,10 +131,7 @@ Contents: vxlan x25 x25-iface - xfrm_device - xfrm_proc - xfrm_sync - xfrm_sysctl + xfrm/index xdp-rx-metadata xsk-tx-metadata diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst index a06cb99d66dcdc..bc9a01606daf5a 100644 --- a/Documentation/networking/ip-sysctl.rst +++ b/Documentation/networking/ip-sysctl.rst @@ -673,6 +673,16 @@ tcp_moderate_rcvbuf - BOOLEAN Default: 1 (enabled) +tcp_rcvbuf_low_rtt - INTEGER + rcvbuf autotuning can over estimate final socket rcvbuf, which + can lead to cache trashing for high throughput flows. + + For small RTT flows (below tcp_rcvbuf_low_rtt usecs), we can relax + rcvbuf growth: Few additional ms to reach the final (and smaller) + rcvbuf is a good tradeoff. + + Default : 1000 (1 ms) + tcp_mtu_probing - INTEGER Controls TCP Packetization-Layer Path MTU Discovery. Takes three values: @@ -854,9 +864,18 @@ tcp_sack - BOOLEAN Default: 1 (enabled) +tcp_comp_sack_rtt_percent - INTEGER + Percentage of SRTT used for the compressed SACK feature. + See tcp_comp_sack_nr, tcp_comp_sack_delay_ns, tcp_comp_sack_slack_ns. + + Possible values : 1 - 1000 + + Default : 33 % + tcp_comp_sack_delay_ns - LONG INTEGER - TCP tries to reduce number of SACK sent, using a timer - based on 5% of SRTT, capped by this sysctl, in nano seconds. + TCP tries to reduce number of SACK sent, using a timer based + on tcp_comp_sack_rtt_percent of SRTT, capped by this sysctl + in nano seconds. The default is 1ms, based on TSO autosizing period. Default : 1,000,000 ns (1 ms) @@ -866,8 +885,9 @@ tcp_comp_sack_slack_ns - LONG INTEGER timer used by SACK compression. This gives extra time for small RTT flows, and reduces system overhead by allowing opportunistic reduction of timer interrupts. + Too big values might reduce goodput. - Default : 100,000 ns (100 us) + Default : 10,000 ns (10 us) tcp_comp_sack_nr - INTEGER Max number of SACK that can be compressed. @@ -1796,6 +1816,23 @@ icmp_errors_use_inbound_ifaddr - BOOLEAN Default: 0 (disabled) +icmp_errors_extension_mask - UNSIGNED INTEGER + Bitmask of ICMP extensions to append to ICMPv4 error messages + ("Destination Unreachable", "Time Exceeded" and "Parameter Problem"). + The original datagram is trimmed / padded to 128 bytes in order to be + compatible with applications that do not comply with RFC 4884. + + Possible extensions are: + + ==== ============================================================== + 0x01 Incoming IP interface information according to RFC 5837. + Extension will include the index, IPv4 address (if present), + name and MTU of the IP interface that received the datagram + which elicited the ICMP error. + ==== ============================================================== + + Default: 0x00 (no extensions) + igmp_max_memberships - INTEGER Change the maximum number of multicast groups we can subscribe to. Default: 20 @@ -3262,6 +3299,23 @@ error_anycast_as_unicast - BOOLEAN Default: 0 (disabled) +errors_extension_mask - UNSIGNED INTEGER + Bitmask of ICMP extensions to append to ICMPv6 error messages + ("Destination Unreachable" and "Time Exceeded"). The original datagram + is trimmed / padded to 128 bytes in order to be compatible with + applications that do not comply with RFC 4884. + + Possible extensions are: + + ==== ============================================================== + 0x01 Incoming IP interface information according to RFC 5837. + Extension will include the index, IPv6 address (if present), + name and MTU of the IP interface that received the datagram + which elicited the ICMP error. + ==== ============================================================== + + Default: 0x00 (no extensions) + xfrm6_gc_thresh - INTEGER (Obsolete since linux-4.14) The threshold at which we will start garbage collecting for IPv6 diff --git a/Documentation/networking/napi.rst b/Documentation/networking/napi.rst index 7dd60366f4ff39..4e008efebb352a 100644 --- a/Documentation/networking/napi.rst +++ b/Documentation/networking/napi.rst @@ -263,7 +263,9 @@ are not well known). Busy polling is enabled by either setting ``SO_BUSY_POLL`` on selected sockets or using the global ``net.core.busy_poll`` and ``net.core.busy_read`` sysctls. An io_uring API for NAPI busy polling -also exists. +also exists. Threaded polling of NAPI also has a mode to busy poll for +packets (:ref:`threaded busy polling`) using the NAPI +processing kthread. epoll-based busy polling ------------------------ @@ -426,6 +428,52 @@ Therefore, setting ``gro_flush_timeout`` and ``napi_defer_hard_irqs`` is the recommended usage, because otherwise setting ``irq-suspend-timeout`` might not have any discernible effect. +.. _threaded_busy_poll: + +Threaded NAPI busy polling +-------------------------- + +Threaded NAPI busy polling extends threaded NAPI and adds support to do +continuous busy polling of the NAPI. This can be useful for forwarding or +AF_XDP applications. + +Threaded NAPI busy polling can be enabled on per NIC queue basis using Netlink. + +For example, using the following script: + +.. code-block:: bash + + $ ynl --family netdev --do napi-set \ + --json='{"id": 66, "threaded": "busy-poll"}' + +The kernel will create a kthread that busy polls on this NAPI. + +The user may elect to set the CPU affinity of this kthread to an unused CPU +core to improve how often the NAPI is polled at the expense of wasted CPU +cycles. Note that this will keep the CPU core busy with 100% usage. + +Once threaded busy polling is enabled for a NAPI, PID of the kthread can be +retrieved using Netlink so the affinity of the kthread can be set up. + +For example, the following script can be used to fetch the PID: + +.. code-block:: bash + + $ ynl --family netdev --do napi-get --json='{"id": 66}' + +This will output something like following, the pid `258` is the PID of the +kthread that is polling this NAPI. + +.. code-block:: bash + + $ {'defer-hard-irqs': 0, + 'gro-flush-timeout': 0, + 'id': 66, + 'ifindex': 2, + 'irq-suspend-timeout': 0, + 'pid': 258, + 'threaded': 'busy-poll'} + .. _threaded: Threaded NAPI diff --git a/Documentation/networking/net_cachelines/inet_connection_sock.rst b/Documentation/networking/net_cachelines/inet_connection_sock.rst index 8fae85ebb77308..cc2000f55c2987 100644 --- a/Documentation/networking/net_cachelines/inet_connection_sock.rst +++ b/Documentation/networking/net_cachelines/inet_connection_sock.rst @@ -12,8 +12,8 @@ struct inet_sock icsk_inet read_mostly r struct request_sock_queue icsk_accept_queue struct inet_bind_bucket icsk_bind_hash read_mostly tcp_set_state struct inet_bind2_bucket icsk_bind2_hash read_mostly tcp_set_state,inet_put_port -struct timer_list icsk_retransmit_timer read_write inet_csk_reset_xmit_timer,tcp_connect struct timer_list icsk_delack_timer read_mostly inet_csk_reset_xmit_timer,tcp_connect +struct timer_list icsk_keepalive_timer u32 icsk_rto read_write tcp_cwnd_validate,tcp_schedule_loss_probe,tcp_connect_init,tcp_connect,tcp_write_xmit,tcp_push_one u32 icsk_rto_min u32 icsk_rto_max read_mostly tcp_reset_xmit_timer diff --git a/Documentation/networking/net_cachelines/inet_sock.rst b/Documentation/networking/net_cachelines/inet_sock.rst index b11bf48fa2b36a..4c72a28a7012eb 100644 --- a/Documentation/networking/net_cachelines/inet_sock.rst +++ b/Documentation/networking/net_cachelines/inet_sock.rst @@ -5,42 +5,43 @@ inet_sock struct fast path usage breakdown ========================================== -======================= ===================== =================== =================== ====================================================================================================== -Type Name fastpath_tx_access fastpath_rx_access comment -======================= ===================== =================== =================== ====================================================================================================== -struct sock sk read_mostly read_mostly tcp_init_buffer_space,tcp_init_transfer,tcp_finish_connect,tcp_connect,tcp_send_rcvq,tcp_send_syn_data -struct ipv6_pinfo* pinet6 -be16 inet_sport read_mostly __tcp_transmit_skb -be32 inet_daddr read_mostly ip_select_ident_segs -be32 inet_rcv_saddr -be16 inet_dport read_mostly __tcp_transmit_skb -u16 inet_num -be32 inet_saddr -s16 uc_ttl read_mostly __ip_queue_xmit/ip_select_ttl -u16 cmsg_flags -struct ip_options_rcu* inet_opt read_mostly __ip_queue_xmit -u16 inet_id read_mostly ip_select_ident_segs -u8 tos read_mostly ip_queue_xmit -u8 min_ttl -u8 mc_ttl -u8 pmtudisc -u8:1 recverr -u8:1 is_icsk -u8:1 freebind -u8:1 hdrincl -u8:1 mc_loop -u8:1 transparent -u8:1 mc_all -u8:1 nodefrag -u8:1 bind_address_no_port -u8:1 recverr_rfc4884 -u8:1 defer_connect read_mostly tcp_sendmsg_fastopen -u8 rcv_tos -u8 convert_csum -int uc_index -int mc_index -be32 mc_addr -struct ip_mc_socklist* mc_list -struct inet_cork_full cork read_mostly __tcp_transmit_skb -struct local_port_range -======================= ===================== =================== =================== ====================================================================================================== +======================== ===================== =================== =================== ====================================================================================================== +Type Name fastpath_tx_access fastpath_rx_access comment +======================== ===================== =================== =================== ====================================================================================================== +struct sock sk read_mostly read_mostly tcp_init_buffer_space,tcp_init_transfer,tcp_finish_connect,tcp_connect,tcp_send_rcvq,tcp_send_syn_data +struct ipv6_pinfo* pinet6 +struct ipv6_fl_socklist* ipv6_fl_list read_mostly tcp_v6_connect,__ip6_datagram_connect,udpv6_sendmsg,rawv6_sendmsg +be16 inet_sport read_mostly __tcp_transmit_skb +be32 inet_daddr read_mostly ip_select_ident_segs +be32 inet_rcv_saddr +be16 inet_dport read_mostly __tcp_transmit_skb +u16 inet_num +be32 inet_saddr +s16 uc_ttl read_mostly __ip_queue_xmit/ip_select_ttl +u16 cmsg_flags +struct ip_options_rcu* inet_opt read_mostly __ip_queue_xmit +u16 inet_id read_mostly ip_select_ident_segs +u8 tos read_mostly ip_queue_xmit +u8 min_ttl +u8 mc_ttl +u8 pmtudisc +u8:1 recverr +u8:1 is_icsk +u8:1 freebind +u8:1 hdrincl +u8:1 mc_loop +u8:1 transparent +u8:1 mc_all +u8:1 nodefrag +u8:1 bind_address_no_port +u8:1 recverr_rfc4884 +u8:1 defer_connect read_mostly tcp_sendmsg_fastopen +u8 rcv_tos +u8 convert_csum +int uc_index +int mc_index +be32 mc_addr +struct ip_mc_socklist* mc_list +struct inet_cork_full cork read_mostly __tcp_transmit_skb +struct local_port_range +======================== ===================== =================== =================== ====================================================================================================== diff --git a/Documentation/networking/net_cachelines/netns_ipv4_sysctl.rst b/Documentation/networking/net_cachelines/netns_ipv4_sysctl.rst index 6e7b20afd2d498..beaf1880a19bf4 100644 --- a/Documentation/networking/net_cachelines/netns_ipv4_sysctl.rst +++ b/Documentation/networking/net_cachelines/netns_ipv4_sysctl.rst @@ -102,7 +102,8 @@ u8 sysctl_tcp_app_win u8 sysctl_tcp_frto tcp_enter_loss u8 sysctl_tcp_nometrics_save TCP_LAST_ACK/tcp_update_metrics u8 sysctl_tcp_no_ssthresh_metrics_save TCP_LAST_ACK/tcp_(update/init)_metrics -u8 sysctl_tcp_moderate_rcvbuf read_mostly read_mostly tcp_tso_should_defer(tx);tcp_rcv_space_adjust(rx) +u8 sysctl_tcp_moderate_rcvbuf read_mostly tcp_rcvbuf_grow() +u32 sysctl_tcp_rcvbuf_low_rtt read_mostly tcp_rcvbuf_grow() u8 sysctl_tcp_tso_win_divisor read_mostly tcp_tso_should_defer(tcp_write_xmit) u8 sysctl_tcp_workaround_signed_windows tcp_select_window int sysctl_tcp_limit_output_bytes read_mostly tcp_small_queue_check(tcp_write_xmit) diff --git a/Documentation/networking/netconsole.rst b/Documentation/networking/netconsole.rst index 2555e75e5cc1c3..4ab5d7b05cf102 100644 --- a/Documentation/networking/netconsole.rst +++ b/Documentation/networking/netconsole.rst @@ -88,7 +88,7 @@ for example: nc -u -l -p ' / 'nc -u -l - or:: + or:: netcat -u -l -p ' / 'netcat -u -l diff --git a/Documentation/networking/nfc.rst b/Documentation/networking/nfc.rst index 9aab3a88c9b298..40173500614332 100644 --- a/Documentation/networking/nfc.rst +++ b/Documentation/networking/nfc.rst @@ -71,7 +71,8 @@ Userspace interface The userspace interface is divided in control operations and low-level data exchange operation. -CONTROL OPERATIONS: +Control operations +------------------ Generic netlink is used to implement the interface to the control operations. The operations are composed by commands and events, all listed below: @@ -100,7 +101,8 @@ relevant information such as the supported NFC protocols. All polling operations requested through one netlink socket are stopped when it's closed. -LOW-LEVEL DATA EXCHANGE: +Low-level data exchange +----------------------- The userspace must use PF_NFC sockets to perform any data communication with targets. All NFC sockets use AF_NFC:: diff --git a/Documentation/networking/smc-sysctl.rst b/Documentation/networking/smc-sysctl.rst index a874d007f2db55..904a910f198e44 100644 --- a/Documentation/networking/smc-sysctl.rst +++ b/Documentation/networking/smc-sysctl.rst @@ -71,3 +71,43 @@ smcr_max_conns_per_lgr - INTEGER acceptable value ranges from 16 to 255. Only for SMC-R v2.1 and later. Default: 255 + +smcr_max_send_wr - INTEGER + So-called work request buffers are SMCR link (and RDMA queue pair) level + resources necessary for performing RDMA operations. Since up to 255 + connections can share a link group and thus also a link and the number + of the work request buffers is decided when the link is allocated, + depending on the workload it can be a bottleneck in a sense that threads + have to wait for work request buffers to become available. Before the + introduction of this control the maximal number of work request buffers + available on the send path used to be hard coded to 16. With this control + it becomes configurable. The acceptable range is between 2 and 2048. + + Please be aware that all the buffers need to be allocated as a physically + continuous array in which each element is a single buffer and has the size + of SMC_WR_BUF_SIZE (48) bytes. If the allocation fails, we keep retrying + with half of the buffer count until it is ether successful or (unlikely) + we dip below the old hard coded value which is 16 where we give up much + like before having this control. + + Default: 16 + +smcr_max_recv_wr - INTEGER + So-called work request buffers are SMCR link (and RDMA queue pair) level + resources necessary for performing RDMA operations. Since up to 255 + connections can share a link group and thus also a link and the number + of the work request buffers is decided when the link is allocated, + depending on the workload it can be a bottleneck in a sense that threads + have to wait for work request buffers to become available. Before the + introduction of this control the maximal number of work request buffers + available on the receive path used to be hard coded to 16. With this control + it becomes configurable. The acceptable range is between 2 and 2048. + + Please be aware that all the buffers need to be allocated as a physically + continuous array in which each element is a single buffer and has the size + of SMC_WR_BUF_SIZE (48) bytes. If the allocation fails, we keep retrying + with half of the buffer count until it is ether successful or (unlikely) + we dip below the old hard coded value which is 16 where we give up much + like before having this control. + + Default: 48 diff --git a/Documentation/networking/statistics.rst b/Documentation/networking/statistics.rst index 518284e287b047..66b0ef941457c8 100644 --- a/Documentation/networking/statistics.rst +++ b/Documentation/networking/statistics.rst @@ -184,9 +184,11 @@ Protocol-related statistics can be requested in get commands by setting the `ETHTOOL_FLAG_STATS` flag in `ETHTOOL_A_HEADER_FLAGS`. Currently statistics are supported in the following commands: - - `ETHTOOL_MSG_PAUSE_GET` - `ETHTOOL_MSG_FEC_GET` + - `ETHTOOL_MSG_LINKSTATE_GET` - `ETHTOOL_MSG_MM_GET` + - `ETHTOOL_MSG_PAUSE_GET` + - `ETHTOOL_MSG_TSINFO_GET` debugfs ------- diff --git a/Documentation/networking/tls.rst b/Documentation/networking/tls.rst index 36cc7afc2527d4..980c442d7161ae 100644 --- a/Documentation/networking/tls.rst +++ b/Documentation/networking/tls.rst @@ -280,6 +280,26 @@ If the record decrypted turns out to had been padded or is not a data record it will be decrypted again into a kernel buffer without zero copy. Such events are counted in the ``TlsDecryptRetry`` statistic. +TLS_TX_MAX_PAYLOAD_LEN +~~~~~~~~~~~~~~~~~~~~~~ + +Specifies the maximum size of the plaintext payload for transmitted TLS records. + +When this option is set, the kernel enforces the specified limit on all outgoing +TLS records. No plaintext fragment will exceed this size. This option can be used +to implement the TLS Record Size Limit extension [1]. + +* For TLS 1.2, the value corresponds directly to the record size limit. +* For TLS 1.3, the value should be set to record_size_limit - 1, since + the record size limit includes one additional byte for the ContentType + field. + +The valid range for this option is 64 to 16384 bytes for TLS 1.2, and 63 to +16384 bytes for TLS 1.3. The lower minimum for TLS 1.3 accounts for the +extra byte used by the ContentType field. + +[1] https://datatracker.ietf.org/doc/html/rfc8449 + Statistics ========== diff --git a/Documentation/networking/xfrm/index.rst b/Documentation/networking/xfrm/index.rst new file mode 100644 index 00000000000000..7d866da836fe76 --- /dev/null +++ b/Documentation/networking/xfrm/index.rst @@ -0,0 +1,13 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============== +XFRM Framework +============== + +.. toctree:: + :maxdepth: 2 + + xfrm_device + xfrm_proc + xfrm_sync + xfrm_sysctl diff --git a/Documentation/networking/xfrm/xfrm_device.rst b/Documentation/networking/xfrm/xfrm_device.rst new file mode 100644 index 00000000000000..b0d85a5f57d1d5 --- /dev/null +++ b/Documentation/networking/xfrm/xfrm_device.rst @@ -0,0 +1,206 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. _xfrm_device: + +=============================================== +XFRM device - offloading the IPsec computations +=============================================== + +Shannon Nelson +Leon Romanovsky + + +Overview +======== + +IPsec is a useful feature for securing network traffic, but the +computational cost is high: a 10Gbps link can easily be brought down +to under 1Gbps, depending on the traffic and link configuration. +Luckily, there are NICs that offer a hardware based IPsec offload which +can radically increase throughput and decrease CPU utilization. The XFRM +Device interface allows NIC drivers to offer to the stack access to the +hardware offload. + +Right now, there are two types of hardware offload that kernel supports: + + * IPsec crypto offload: + + * NIC performs encrypt/decrypt + * Kernel does everything else + + * IPsec packet offload: + + * NIC performs encrypt/decrypt + * NIC does encapsulation + * Kernel and NIC have SA and policy in-sync + * NIC handles the SA and policies states + * The Kernel talks to the keymanager + +Userland access to the offload is typically through a system such as +libreswan or KAME/raccoon, but the iproute2 'ip xfrm' command set can +be handy when experimenting. An example command might look something +like this for crypto offload:: + + ip x s add proto esp dst 14.0.0.70 src 14.0.0.52 spi 0x07 mode transport \ + reqid 0x07 replay-window 32 \ + aead 'rfc4106(gcm(aes))' 0x44434241343332312423222114131211f4f3f2f1 128 \ + sel src 14.0.0.52/24 dst 14.0.0.70/24 proto tcp \ + offload dev eth4 dir in + +and for packet offload:: + + ip x s add proto esp dst 14.0.0.70 src 14.0.0.52 spi 0x07 mode transport \ + reqid 0x07 replay-window 32 \ + aead 'rfc4106(gcm(aes))' 0x44434241343332312423222114131211f4f3f2f1 128 \ + sel src 14.0.0.52/24 dst 14.0.0.70/24 proto tcp \ + offload packet dev eth4 dir in + + ip x p add src 14.0.0.70 dst 14.0.0.52 offload packet dev eth4 dir in + tmpl src 14.0.0.70 dst 14.0.0.52 proto esp reqid 10000 mode transport + +Yes, that's ugly, but that's what shell scripts and/or libreswan are for. + + + +Callbacks to implement +====================== + +:: + + /* from include/linux/netdevice.h */ + struct xfrmdev_ops { + /* Crypto and Packet offload callbacks */ + int (*xdo_dev_state_add)(struct net_device *dev, + struct xfrm_state *x, + struct netlink_ext_ack *extack); + void (*xdo_dev_state_delete)(struct net_device *dev, + struct xfrm_state *x); + void (*xdo_dev_state_free)(struct net_device *dev, + struct xfrm_state *x); + bool (*xdo_dev_offload_ok) (struct sk_buff *skb, + struct xfrm_state *x); + void (*xdo_dev_state_advance_esn) (struct xfrm_state *x); + void (*xdo_dev_state_update_stats) (struct xfrm_state *x); + + /* Solely packet offload callbacks */ + int (*xdo_dev_policy_add) (struct xfrm_policy *x, struct netlink_ext_ack *extack); + void (*xdo_dev_policy_delete) (struct xfrm_policy *x); + void (*xdo_dev_policy_free) (struct xfrm_policy *x); + }; + +The NIC driver offering ipsec offload will need to implement callbacks +relevant to supported offload to make the offload available to the network +stack's XFRM subsystem. Additionally, the feature bits NETIF_F_HW_ESP and +NETIF_F_HW_ESP_TX_CSUM will signal the availability of the offload. + + + +Flow +==== + +At probe time and before the call to register_netdev(), the driver should +set up local data structures and XFRM callbacks, and set the feature bits. +The XFRM code's listener will finish the setup on NETDEV_REGISTER. + +:: + + adapter->netdev->xfrmdev_ops = &ixgbe_xfrmdev_ops; + adapter->netdev->features |= NETIF_F_HW_ESP; + adapter->netdev->hw_enc_features |= NETIF_F_HW_ESP; + +When new SAs are set up with a request for "offload" feature, the +driver's xdo_dev_state_add() will be given the new SA to be offloaded +and an indication of whether it is for Rx or Tx. The driver should + + - verify the algorithm is supported for offloads + - store the SA information (key, salt, target-ip, protocol, etc) + - enable the HW offload of the SA + - return status value: + + =========== =================================== + 0 success + -EOPNETSUPP offload not supported, try SW IPsec, + not applicable for packet offload mode + other fail the request + =========== =================================== + +The driver can also set an offload_handle in the SA, an opaque void pointer +that can be used to convey context into the fast-path offload requests:: + + xs->xso.offload_handle = context; + + +When the network stack is preparing an IPsec packet for an SA that has +been setup for offload, it first calls into xdo_dev_offload_ok() with +the skb and the intended offload state to ask the driver if the offload +will serviceable. This can check the packet information to be sure the +offload can be supported (e.g. IPv4 or IPv6, no IPv4 options, etc) and +return true or false to signify its support. In case driver doesn't implement +this callback, the stack provides reasonable defaults. + +Crypto offload mode: +When ready to send, the driver needs to inspect the Tx packet for the +offload information, including the opaque context, and set up the packet +send accordingly:: + + xs = xfrm_input_state(skb); + context = xs->xso.offload_handle; + set up HW for send + +The stack has already inserted the appropriate IPsec headers in the +packet data, the offload just needs to do the encryption and fix up the +header values. + + +When a packet is received and the HW has indicated that it offloaded a +decryption, the driver needs to add a reference to the decoded SA into +the packet's skb. At this point the data should be decrypted but the +IPsec headers are still in the packet data; they are removed later up +the stack in xfrm_input(). + +1. Find and hold the SA that was used to the Rx skb:: + + /* get spi, protocol, and destination IP from packet headers */ + xs = find xs from (spi, protocol, dest_IP) + xfrm_state_hold(xs); + +2. Store the state information into the skb:: + + sp = secpath_set(skb); + if (!sp) return; + sp->xvec[sp->len++] = xs; + sp->olen++; + +3. Indicate the success and/or error status of the offload:: + + xo = xfrm_offload(skb); + xo->flags = CRYPTO_DONE; + xo->status = crypto_status; + +4. Hand the packet to napi_gro_receive() as usual. + +In ESN mode, xdo_dev_state_advance_esn() is called from +xfrm_replay_advance_esn() for RX, and xfrm_replay_overflow_offload_esn for TX. +Driver will check packet seq number and update HW ESN state machine if needed. + +Packet offload mode: +HW adds and deletes XFRM headers. So in RX path, XFRM stack is bypassed if HW +reported success. In TX path, the packet lefts kernel without extra header +and not encrypted, the HW is responsible to perform it. + +When the SA is removed by the user, the driver's xdo_dev_state_delete() +and xdo_dev_policy_delete() are asked to disable the offload. Later, +xdo_dev_state_free() and xdo_dev_policy_free() are called from a garbage +collection routine after all reference counts to the state and policy +have been removed and any remaining resources can be cleared for the +offload state. How these are used by the driver will depend on specific +hardware needs. + +As a netdev is set to DOWN the XFRM stack's netdev listener will call +xdo_dev_state_delete(), xdo_dev_policy_delete(), xdo_dev_state_free() and +xdo_dev_policy_free() on any remaining offloaded states. + +Outcome of HW handling packets, the XFRM core can't count hard, soft limits. +The HW/driver are responsible to perform it and provide accurate data when +xdo_dev_state_update_stats() is called. In case of one of these limits +occuried, the driver needs to call to xfrm_state_check_expire() to make sure +that XFRM performs rekeying sequence. diff --git a/Documentation/networking/xfrm/xfrm_proc.rst b/Documentation/networking/xfrm/xfrm_proc.rst new file mode 100644 index 00000000000000..973d1571acac57 --- /dev/null +++ b/Documentation/networking/xfrm/xfrm_proc.rst @@ -0,0 +1,119 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================================== +XFRM proc - /proc/net/xfrm_* files +================================== + +Masahide NAKAMURA + + +Transformation Statistics +------------------------- + +The xfrm_proc code is a set of statistics showing numbers of packets +dropped by the transformation code and why. These counters are defined +as part of the linux private MIB. These counters can be viewed in +/proc/net/xfrm_stat. + + +Inbound errors +~~~~~~~~~~~~~~ + +XfrmInError: + All errors which is not matched others + +XfrmInBufferError: + No buffer is left + +XfrmInHdrError: + Header error + +XfrmInNoStates: + No state is found + i.e. Either inbound SPI, address, or IPsec protocol at SA is wrong + +XfrmInStateProtoError: + Transformation protocol specific error + e.g. SA key is wrong + +XfrmInStateModeError: + Transformation mode specific error + +XfrmInStateSeqError: + Sequence error + i.e. Sequence number is out of window + +XfrmInStateExpired: + State is expired + +XfrmInStateMismatch: + State has mismatch option + e.g. UDP encapsulation type is mismatch + +XfrmInStateInvalid: + State is invalid + +XfrmInTmplMismatch: + No matching template for states + e.g. Inbound SAs are correct but SP rule is wrong + +XfrmInNoPols: + No policy is found for states + e.g. Inbound SAs are correct but no SP is found + +XfrmInPolBlock: + Policy discards + +XfrmInPolError: + Policy error + +XfrmAcquireError: + State hasn't been fully acquired before use + +XfrmFwdHdrError: + Forward routing of a packet is not allowed + +XfrmInStateDirError: + State direction mismatch (lookup found an output state on the input path, expected input or no direction) + +Outbound errors +~~~~~~~~~~~~~~~ +XfrmOutError: + All errors which is not matched others + +XfrmOutBundleGenError: + Bundle generation error + +XfrmOutBundleCheckError: + Bundle check error + +XfrmOutNoStates: + No state is found + +XfrmOutStateProtoError: + Transformation protocol specific error + +XfrmOutStateModeError: + Transformation mode specific error + +XfrmOutStateSeqError: + Sequence error + i.e. Sequence number overflow + +XfrmOutStateExpired: + State is expired + +XfrmOutPolBlock: + Policy discards + +XfrmOutPolDead: + Policy is dead + +XfrmOutPolError: + Policy error + +XfrmOutStateInvalid: + State is invalid, perhaps expired + +XfrmOutStateDirError: + State direction mismatch (lookup found an input state on the output path, expected output or no direction) diff --git a/Documentation/networking/xfrm/xfrm_sync.rst b/Documentation/networking/xfrm/xfrm_sync.rst new file mode 100644 index 00000000000000..dfc2ec0df380c4 --- /dev/null +++ b/Documentation/networking/xfrm/xfrm_sync.rst @@ -0,0 +1,192 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========= +XFRM sync +========= + +The sync patches work is based on initial patches from +Krisztian and others and additional patches +from Jamal . + +The end goal for syncing is to be able to insert attributes + generate +events so that the SA can be safely moved from one machine to another +for HA purposes. +The idea is to synchronize the SA so that the takeover machine can do +the processing of the SA as accurate as possible if it has access to it. + +We already have the ability to generate SA add/del/upd events. +These patches add ability to sync and have accurate lifetime byte (to +ensure proper decay of SAs) and replay counters to avoid replay attacks +with as minimal loss at failover time. +This way a backup stays as closely up-to-date as an active member. + +Because the above items change for every packet the SA receives, +it is possible for a lot of the events to be generated. +For this reason, we also add a nagle-like algorithm to restrict +the events. i.e we are going to set thresholds to say "let me +know if the replay sequence threshold is reached or 10 secs have passed" +These thresholds are set system-wide via sysctls or can be updated +per SA. + +The identified items that need to be synchronized are: +- the lifetime byte counter +note that: lifetime time limit is not important if you assume the failover +machine is known ahead of time since the decay of the time countdown +is not driven by packet arrival. +- the replay sequence for both inbound and outbound + +1) Message Structure +-------------------- + +nlmsghdr:aevent_id:optional-TLVs. + +The netlink message types are: + +XFRM_MSG_NEWAE and XFRM_MSG_GETAE. + +A XFRM_MSG_GETAE does not have TLVs. + +A XFRM_MSG_NEWAE will have at least two TLVs (as is +discussed further below). + +aevent_id structure looks like:: + + struct xfrm_aevent_id { + struct xfrm_usersa_id sa_id; + xfrm_address_t saddr; + __u32 flags; + __u32 reqid; + }; + +The unique SA is identified by the combination of xfrm_usersa_id, +reqid and saddr. + +flags are used to indicate different things. The possible +flags are:: + + XFRM_AE_RTHR=1, /* replay threshold*/ + XFRM_AE_RVAL=2, /* replay value */ + XFRM_AE_LVAL=4, /* lifetime value */ + XFRM_AE_ETHR=8, /* expiry timer threshold */ + XFRM_AE_CR=16, /* Event cause is replay update */ + XFRM_AE_CE=32, /* Event cause is timer expiry */ + XFRM_AE_CU=64, /* Event cause is policy update */ + +How these flags are used is dependent on the direction of the +message (kernel<->user) as well the cause (config, query or event). +This is described below in the different messages. + +The pid will be set appropriately in netlink to recognize direction +(0 to the kernel and pid = processid that created the event +when going from kernel to user space) + +A program needs to subscribe to multicast group XFRMNLGRP_AEVENTS +to get notified of these events. + +2) TLVS reflect the different parameters +---------------------------------------- + +a) byte value (XFRMA_LTIME_VAL) + + This TLV carries the running/current counter for byte lifetime since + last event. + +b) replay value (XFRMA_REPLAY_VAL) + + This TLV carries the running/current counter for replay sequence since + last event. + +c) replay threshold (XFRMA_REPLAY_THRESH) + + This TLV carries the threshold being used by the kernel to trigger events + when the replay sequence is exceeded. + +d) expiry timer (XFRMA_ETIMER_THRESH) + + This is a timer value in milliseconds which is used as the nagle + value to rate limit the events. + +3) Default configurations for the parameters +-------------------------------------------- + +By default these events should be turned off unless there is +at least one listener registered to listen to the multicast +group XFRMNLGRP_AEVENTS. + +Programs installing SAs will need to specify the two thresholds, however, +in order to not change existing applications such as racoon +we also provide default threshold values for these different parameters +in case they are not specified. + +the two sysctls/proc entries are: + +a) /proc/sys/net/core/sysctl_xfrm_aevent_etime + + Used to provide default values for the XFRMA_ETIMER_THRESH in incremental + units of time of 100ms. The default is 10 (1 second) + +b) /proc/sys/net/core/sysctl_xfrm_aevent_rseqth + + Used to provide default values for XFRMA_REPLAY_THRESH parameter + in incremental packet count. The default is two packets. + +4) Message types +---------------- + +a) XFRM_MSG_GETAE issued by user-->kernel. + XFRM_MSG_GETAE does not carry any TLVs. + + The response is a XFRM_MSG_NEWAE which is formatted based on what + XFRM_MSG_GETAE queried for. + + The response will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs. + + * if XFRM_AE_RTHR flag is set, then XFRMA_REPLAY_THRESH is also retrieved + * if XFRM_AE_ETHR flag is set, then XFRMA_ETIMER_THRESH is also retrieved + +b) XFRM_MSG_NEWAE is issued by either user space to configure + or kernel to announce events or respond to a XFRM_MSG_GETAE. + + i) user --> kernel to configure a specific SA. + + any of the values or threshold parameters can be updated by passing the + appropriate TLV. + + A response is issued back to the sender in user space to indicate success + or failure. + + In the case of success, additionally an event with + XFRM_MSG_NEWAE is also issued to any listeners as described in iii). + + ii) kernel->user direction as a response to XFRM_MSG_GETAE + + The response will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs. + + The threshold TLVs will be included if explicitly requested in + the XFRM_MSG_GETAE message. + + iii) kernel->user to report as event if someone sets any values or + thresholds for an SA using XFRM_MSG_NEWAE (as described in #i above). + In such a case XFRM_AE_CU flag is set to inform the user that + the change happened as a result of an update. + The message will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs. + + iv) kernel->user to report event when replay threshold or a timeout + is exceeded. + +In such a case either XFRM_AE_CR (replay exceeded) or XFRM_AE_CE (timeout +happened) is set to inform the user what happened. +Note the two flags are mutually exclusive. +The message will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs. + +5) Exceptions to threshold settings +----------------------------------- + +If you have an SA that is getting hit by traffic in bursts such that +there is a period where the timer threshold expires with no packets +seen, then an odd behavior is seen as follows: +The first packet arrival after a timer expiry will trigger a timeout +event; i.e we don't wait for a timeout period or a packet threshold +to be reached. This is done for simplicity and efficiency reasons. + +-JHS diff --git a/Documentation/networking/xfrm/xfrm_sysctl.rst b/Documentation/networking/xfrm/xfrm_sysctl.rst new file mode 100644 index 00000000000000..7d0c4b17c0bdf1 --- /dev/null +++ b/Documentation/networking/xfrm/xfrm_sysctl.rst @@ -0,0 +1,11 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============ +XFRM Syscall +============ + +/proc/sys/net/core/xfrm_* Variables +=================================== + +xfrm_acq_expires - INTEGER + default 30 - hard timeout in seconds for acquire requests diff --git a/Documentation/networking/xfrm_device.rst b/Documentation/networking/xfrm_device.rst deleted file mode 100644 index 122204da0fff69..00000000000000 --- a/Documentation/networking/xfrm_device.rst +++ /dev/null @@ -1,202 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 -.. _xfrm_device: - -=============================================== -XFRM device - offloading the IPsec computations -=============================================== - -Shannon Nelson -Leon Romanovsky - - -Overview -======== - -IPsec is a useful feature for securing network traffic, but the -computational cost is high: a 10Gbps link can easily be brought down -to under 1Gbps, depending on the traffic and link configuration. -Luckily, there are NICs that offer a hardware based IPsec offload which -can radically increase throughput and decrease CPU utilization. The XFRM -Device interface allows NIC drivers to offer to the stack access to the -hardware offload. - -Right now, there are two types of hardware offload that kernel supports. - * IPsec crypto offload: - * NIC performs encrypt/decrypt - * Kernel does everything else - * IPsec packet offload: - * NIC performs encrypt/decrypt - * NIC does encapsulation - * Kernel and NIC have SA and policy in-sync - * NIC handles the SA and policies states - * The Kernel talks to the keymanager - -Userland access to the offload is typically through a system such as -libreswan or KAME/raccoon, but the iproute2 'ip xfrm' command set can -be handy when experimenting. An example command might look something -like this for crypto offload: - - ip x s add proto esp dst 14.0.0.70 src 14.0.0.52 spi 0x07 mode transport \ - reqid 0x07 replay-window 32 \ - aead 'rfc4106(gcm(aes))' 0x44434241343332312423222114131211f4f3f2f1 128 \ - sel src 14.0.0.52/24 dst 14.0.0.70/24 proto tcp \ - offload dev eth4 dir in - -and for packet offload - - ip x s add proto esp dst 14.0.0.70 src 14.0.0.52 spi 0x07 mode transport \ - reqid 0x07 replay-window 32 \ - aead 'rfc4106(gcm(aes))' 0x44434241343332312423222114131211f4f3f2f1 128 \ - sel src 14.0.0.52/24 dst 14.0.0.70/24 proto tcp \ - offload packet dev eth4 dir in - - ip x p add src 14.0.0.70 dst 14.0.0.52 offload packet dev eth4 dir in - tmpl src 14.0.0.70 dst 14.0.0.52 proto esp reqid 10000 mode transport - -Yes, that's ugly, but that's what shell scripts and/or libreswan are for. - - - -Callbacks to implement -====================== - -:: - - /* from include/linux/netdevice.h */ - struct xfrmdev_ops { - /* Crypto and Packet offload callbacks */ - int (*xdo_dev_state_add)(struct net_device *dev, - struct xfrm_state *x, - struct netlink_ext_ack *extack); - void (*xdo_dev_state_delete)(struct net_device *dev, - struct xfrm_state *x); - void (*xdo_dev_state_free)(struct net_device *dev, - struct xfrm_state *x); - bool (*xdo_dev_offload_ok) (struct sk_buff *skb, - struct xfrm_state *x); - void (*xdo_dev_state_advance_esn) (struct xfrm_state *x); - void (*xdo_dev_state_update_stats) (struct xfrm_state *x); - - /* Solely packet offload callbacks */ - int (*xdo_dev_policy_add) (struct xfrm_policy *x, struct netlink_ext_ack *extack); - void (*xdo_dev_policy_delete) (struct xfrm_policy *x); - void (*xdo_dev_policy_free) (struct xfrm_policy *x); - }; - -The NIC driver offering ipsec offload will need to implement callbacks -relevant to supported offload to make the offload available to the network -stack's XFRM subsystem. Additionally, the feature bits NETIF_F_HW_ESP and -NETIF_F_HW_ESP_TX_CSUM will signal the availability of the offload. - - - -Flow -==== - -At probe time and before the call to register_netdev(), the driver should -set up local data structures and XFRM callbacks, and set the feature bits. -The XFRM code's listener will finish the setup on NETDEV_REGISTER. - -:: - - adapter->netdev->xfrmdev_ops = &ixgbe_xfrmdev_ops; - adapter->netdev->features |= NETIF_F_HW_ESP; - adapter->netdev->hw_enc_features |= NETIF_F_HW_ESP; - -When new SAs are set up with a request for "offload" feature, the -driver's xdo_dev_state_add() will be given the new SA to be offloaded -and an indication of whether it is for Rx or Tx. The driver should - - - verify the algorithm is supported for offloads - - store the SA information (key, salt, target-ip, protocol, etc) - - enable the HW offload of the SA - - return status value: - - =========== =================================== - 0 success - -EOPNETSUPP offload not supported, try SW IPsec, - not applicable for packet offload mode - other fail the request - =========== =================================== - -The driver can also set an offload_handle in the SA, an opaque void pointer -that can be used to convey context into the fast-path offload requests:: - - xs->xso.offload_handle = context; - - -When the network stack is preparing an IPsec packet for an SA that has -been setup for offload, it first calls into xdo_dev_offload_ok() with -the skb and the intended offload state to ask the driver if the offload -will serviceable. This can check the packet information to be sure the -offload can be supported (e.g. IPv4 or IPv6, no IPv4 options, etc) and -return true or false to signify its support. In case driver doesn't implement -this callback, the stack provides reasonable defaults. - -Crypto offload mode: -When ready to send, the driver needs to inspect the Tx packet for the -offload information, including the opaque context, and set up the packet -send accordingly:: - - xs = xfrm_input_state(skb); - context = xs->xso.offload_handle; - set up HW for send - -The stack has already inserted the appropriate IPsec headers in the -packet data, the offload just needs to do the encryption and fix up the -header values. - - -When a packet is received and the HW has indicated that it offloaded a -decryption, the driver needs to add a reference to the decoded SA into -the packet's skb. At this point the data should be decrypted but the -IPsec headers are still in the packet data; they are removed later up -the stack in xfrm_input(). - - find and hold the SA that was used to the Rx skb:: - - get spi, protocol, and destination IP from packet headers - xs = find xs from (spi, protocol, dest_IP) - xfrm_state_hold(xs); - - store the state information into the skb:: - - sp = secpath_set(skb); - if (!sp) return; - sp->xvec[sp->len++] = xs; - sp->olen++; - - indicate the success and/or error status of the offload:: - - xo = xfrm_offload(skb); - xo->flags = CRYPTO_DONE; - xo->status = crypto_status; - - hand the packet to napi_gro_receive() as usual - -In ESN mode, xdo_dev_state_advance_esn() is called from -xfrm_replay_advance_esn() for RX, and xfrm_replay_overflow_offload_esn for TX. -Driver will check packet seq number and update HW ESN state machine if needed. - -Packet offload mode: -HW adds and deletes XFRM headers. So in RX path, XFRM stack is bypassed if HW -reported success. In TX path, the packet lefts kernel without extra header -and not encrypted, the HW is responsible to perform it. - -When the SA is removed by the user, the driver's xdo_dev_state_delete() -and xdo_dev_policy_delete() are asked to disable the offload. Later, -xdo_dev_state_free() and xdo_dev_policy_free() are called from a garbage -collection routine after all reference counts to the state and policy -have been removed and any remaining resources can be cleared for the -offload state. How these are used by the driver will depend on specific -hardware needs. - -As a netdev is set to DOWN the XFRM stack's netdev listener will call -xdo_dev_state_delete(), xdo_dev_policy_delete(), xdo_dev_state_free() and -xdo_dev_policy_free() on any remaining offloaded states. - -Outcome of HW handling packets, the XFRM core can't count hard, soft limits. -The HW/driver are responsible to perform it and provide accurate data when -xdo_dev_state_update_stats() is called. In case of one of these limits -occuried, the driver needs to call to xfrm_state_check_expire() to make sure -that XFRM performs rekeying sequence. diff --git a/Documentation/networking/xfrm_proc.rst b/Documentation/networking/xfrm_proc.rst deleted file mode 100644 index 973d1571acac57..00000000000000 --- a/Documentation/networking/xfrm_proc.rst +++ /dev/null @@ -1,119 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -================================== -XFRM proc - /proc/net/xfrm_* files -================================== - -Masahide NAKAMURA - - -Transformation Statistics -------------------------- - -The xfrm_proc code is a set of statistics showing numbers of packets -dropped by the transformation code and why. These counters are defined -as part of the linux private MIB. These counters can be viewed in -/proc/net/xfrm_stat. - - -Inbound errors -~~~~~~~~~~~~~~ - -XfrmInError: - All errors which is not matched others - -XfrmInBufferError: - No buffer is left - -XfrmInHdrError: - Header error - -XfrmInNoStates: - No state is found - i.e. Either inbound SPI, address, or IPsec protocol at SA is wrong - -XfrmInStateProtoError: - Transformation protocol specific error - e.g. SA key is wrong - -XfrmInStateModeError: - Transformation mode specific error - -XfrmInStateSeqError: - Sequence error - i.e. Sequence number is out of window - -XfrmInStateExpired: - State is expired - -XfrmInStateMismatch: - State has mismatch option - e.g. UDP encapsulation type is mismatch - -XfrmInStateInvalid: - State is invalid - -XfrmInTmplMismatch: - No matching template for states - e.g. Inbound SAs are correct but SP rule is wrong - -XfrmInNoPols: - No policy is found for states - e.g. Inbound SAs are correct but no SP is found - -XfrmInPolBlock: - Policy discards - -XfrmInPolError: - Policy error - -XfrmAcquireError: - State hasn't been fully acquired before use - -XfrmFwdHdrError: - Forward routing of a packet is not allowed - -XfrmInStateDirError: - State direction mismatch (lookup found an output state on the input path, expected input or no direction) - -Outbound errors -~~~~~~~~~~~~~~~ -XfrmOutError: - All errors which is not matched others - -XfrmOutBundleGenError: - Bundle generation error - -XfrmOutBundleCheckError: - Bundle check error - -XfrmOutNoStates: - No state is found - -XfrmOutStateProtoError: - Transformation protocol specific error - -XfrmOutStateModeError: - Transformation mode specific error - -XfrmOutStateSeqError: - Sequence error - i.e. Sequence number overflow - -XfrmOutStateExpired: - State is expired - -XfrmOutPolBlock: - Policy discards - -XfrmOutPolDead: - Policy is dead - -XfrmOutPolError: - Policy error - -XfrmOutStateInvalid: - State is invalid, perhaps expired - -XfrmOutStateDirError: - State direction mismatch (lookup found an input state on the output path, expected output or no direction) diff --git a/Documentation/networking/xfrm_sync.rst b/Documentation/networking/xfrm_sync.rst deleted file mode 100644 index 6246503ceab2d2..00000000000000 --- a/Documentation/networking/xfrm_sync.rst +++ /dev/null @@ -1,189 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -==== -XFRM -==== - -The sync patches work is based on initial patches from -Krisztian and others and additional patches -from Jamal . - -The end goal for syncing is to be able to insert attributes + generate -events so that the SA can be safely moved from one machine to another -for HA purposes. -The idea is to synchronize the SA so that the takeover machine can do -the processing of the SA as accurate as possible if it has access to it. - -We already have the ability to generate SA add/del/upd events. -These patches add ability to sync and have accurate lifetime byte (to -ensure proper decay of SAs) and replay counters to avoid replay attacks -with as minimal loss at failover time. -This way a backup stays as closely up-to-date as an active member. - -Because the above items change for every packet the SA receives, -it is possible for a lot of the events to be generated. -For this reason, we also add a nagle-like algorithm to restrict -the events. i.e we are going to set thresholds to say "let me -know if the replay sequence threshold is reached or 10 secs have passed" -These thresholds are set system-wide via sysctls or can be updated -per SA. - -The identified items that need to be synchronized are: -- the lifetime byte counter -note that: lifetime time limit is not important if you assume the failover -machine is known ahead of time since the decay of the time countdown -is not driven by packet arrival. -- the replay sequence for both inbound and outbound - -1) Message Structure ----------------------- - -nlmsghdr:aevent_id:optional-TLVs. - -The netlink message types are: - -XFRM_MSG_NEWAE and XFRM_MSG_GETAE. - -A XFRM_MSG_GETAE does not have TLVs. - -A XFRM_MSG_NEWAE will have at least two TLVs (as is -discussed further below). - -aevent_id structure looks like:: - - struct xfrm_aevent_id { - struct xfrm_usersa_id sa_id; - xfrm_address_t saddr; - __u32 flags; - __u32 reqid; - }; - -The unique SA is identified by the combination of xfrm_usersa_id, -reqid and saddr. - -flags are used to indicate different things. The possible -flags are:: - - XFRM_AE_RTHR=1, /* replay threshold*/ - XFRM_AE_RVAL=2, /* replay value */ - XFRM_AE_LVAL=4, /* lifetime value */ - XFRM_AE_ETHR=8, /* expiry timer threshold */ - XFRM_AE_CR=16, /* Event cause is replay update */ - XFRM_AE_CE=32, /* Event cause is timer expiry */ - XFRM_AE_CU=64, /* Event cause is policy update */ - -How these flags are used is dependent on the direction of the -message (kernel<->user) as well the cause (config, query or event). -This is described below in the different messages. - -The pid will be set appropriately in netlink to recognize direction -(0 to the kernel and pid = processid that created the event -when going from kernel to user space) - -A program needs to subscribe to multicast group XFRMNLGRP_AEVENTS -to get notified of these events. - -2) TLVS reflect the different parameters: ------------------------------------------ - -a) byte value (XFRMA_LTIME_VAL) - -This TLV carries the running/current counter for byte lifetime since -last event. - -b)replay value (XFRMA_REPLAY_VAL) - -This TLV carries the running/current counter for replay sequence since -last event. - -c)replay threshold (XFRMA_REPLAY_THRESH) - -This TLV carries the threshold being used by the kernel to trigger events -when the replay sequence is exceeded. - -d) expiry timer (XFRMA_ETIMER_THRESH) - -This is a timer value in milliseconds which is used as the nagle -value to rate limit the events. - -3) Default configurations for the parameters: ---------------------------------------------- - -By default these events should be turned off unless there is -at least one listener registered to listen to the multicast -group XFRMNLGRP_AEVENTS. - -Programs installing SAs will need to specify the two thresholds, however, -in order to not change existing applications such as racoon -we also provide default threshold values for these different parameters -in case they are not specified. - -the two sysctls/proc entries are: - -a) /proc/sys/net/core/sysctl_xfrm_aevent_etime -used to provide default values for the XFRMA_ETIMER_THRESH in incremental -units of time of 100ms. The default is 10 (1 second) - -b) /proc/sys/net/core/sysctl_xfrm_aevent_rseqth -used to provide default values for XFRMA_REPLAY_THRESH parameter -in incremental packet count. The default is two packets. - -4) Message types ----------------- - -a) XFRM_MSG_GETAE issued by user-->kernel. - XFRM_MSG_GETAE does not carry any TLVs. - -The response is a XFRM_MSG_NEWAE which is formatted based on what -XFRM_MSG_GETAE queried for. - -The response will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs. -* if XFRM_AE_RTHR flag is set, then XFRMA_REPLAY_THRESH is also retrieved -* if XFRM_AE_ETHR flag is set, then XFRMA_ETIMER_THRESH is also retrieved - -b) XFRM_MSG_NEWAE is issued by either user space to configure - or kernel to announce events or respond to a XFRM_MSG_GETAE. - -i) user --> kernel to configure a specific SA. - -any of the values or threshold parameters can be updated by passing the -appropriate TLV. - -A response is issued back to the sender in user space to indicate success -or failure. - -In the case of success, additionally an event with -XFRM_MSG_NEWAE is also issued to any listeners as described in iii). - -ii) kernel->user direction as a response to XFRM_MSG_GETAE - -The response will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs. - -The threshold TLVs will be included if explicitly requested in -the XFRM_MSG_GETAE message. - -iii) kernel->user to report as event if someone sets any values or - thresholds for an SA using XFRM_MSG_NEWAE (as described in #i above). - In such a case XFRM_AE_CU flag is set to inform the user that - the change happened as a result of an update. - The message will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs. - -iv) kernel->user to report event when replay threshold or a timeout - is exceeded. - -In such a case either XFRM_AE_CR (replay exceeded) or XFRM_AE_CE (timeout -happened) is set to inform the user what happened. -Note the two flags are mutually exclusive. -The message will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs. - -Exceptions to threshold settings --------------------------------- - -If you have an SA that is getting hit by traffic in bursts such that -there is a period where the timer threshold expires with no packets -seen, then an odd behavior is seen as follows: -The first packet arrival after a timer expiry will trigger a timeout -event; i.e we don't wait for a timeout period or a packet threshold -to be reached. This is done for simplicity and efficiency reasons. - --JHS diff --git a/Documentation/networking/xfrm_sysctl.rst b/Documentation/networking/xfrm_sysctl.rst deleted file mode 100644 index 47b9bbdd017977..00000000000000 --- a/Documentation/networking/xfrm_sysctl.rst +++ /dev/null @@ -1,11 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -============ -XFRM Syscall -============ - -/proc/sys/net/core/xfrm_* Variables: -==================================== - -xfrm_acq_expires - INTEGER - default 30 - hard timeout in seconds for acquire requests diff --git a/Documentation/power/index.rst b/Documentation/power/index.rst index a0f5244fb42795..ea70633d9ce6c1 100644 --- a/Documentation/power/index.rst +++ b/Documentation/power/index.rst @@ -19,6 +19,7 @@ Power Management power_supply_class runtime_pm s2ram + shutdown-debugging suspend-and-cpuhotplug suspend-and-interrupts swsusp-and-swap-files diff --git a/Documentation/power/pm_qos_interface.rst b/Documentation/power/pm_qos_interface.rst index 5019c79c7710e9..4c008e2202f07d 100644 --- a/Documentation/power/pm_qos_interface.rst +++ b/Documentation/power/pm_qos_interface.rst @@ -55,7 +55,8 @@ int cpu_latency_qos_request_active(handle): From user space: -The infrastructure exposes one device node, /dev/cpu_dma_latency, for the CPU +The infrastructure exposes two separate device nodes, /dev/cpu_dma_latency for +the CPU latency QoS and /dev/cpu_wakeup_latency for the CPU system wakeup latency QoS. Only processes can register a PM QoS request. To provide for automatic @@ -63,15 +64,15 @@ cleanup of a process, the interface requires the process to register its parameter requests as follows. To register the default PM QoS target for the CPU latency QoS, the process must -open /dev/cpu_dma_latency. +open /dev/cpu_dma_latency. To register a CPU system wakeup QoS limit, the +process must open /dev/cpu_wakeup_latency. As long as the device node is held open that process has a registered request on the parameter. To change the requested target value, the process needs to write an s32 value to the open device node. Alternatively, it can write a hex string for the value -using the 10 char long format e.g. "0x12345678". This translates to a -cpu_latency_qos_update_request() call. +using the 10 char long format e.g. "0x12345678". To remove the user mode request for a target value simply close the device node. diff --git a/Documentation/power/power_supply_class.rst b/Documentation/power/power_supply_class.rst index da8e275a14ffb9..6d11f8c594a0bd 100644 --- a/Documentation/power/power_supply_class.rst +++ b/Documentation/power/power_supply_class.rst @@ -7,35 +7,35 @@ Synopsis Power supply class used to represent battery, UPS, AC or DC power supply properties to user-space. -It defines core set of attributes, which should be applicable to (almost) +It defines a core set of attributes which should be applicable to (almost) every power supply out there. Attributes are available via sysfs and uevent interfaces. -Each attribute has well defined meaning, up to unit of measure used. While +Each attribute has a well-defined meaning, up to the unit of measure used. While the attributes provided are believed to be universally applicable to any power supply, specific monitoring hardware may not be able to provide them all, so any of them may be skipped. -Power supply class is extensible, and allows to define drivers own attributes. -The core attribute set is subject to the standard Linux evolution (i.e. -if it will be found that some attribute is applicable to many power supply -types or their drivers, it can be added to the core set). +The power supply class is extensible and allows drivers to define their own +attributes. The core attribute set is subject to the standard Linux evolution +(i.e., if some attribute is found to be applicable to many power +supply types or their drivers, it can be added to the core set). -It also integrates with LED framework, for the purpose of providing +It also integrates with the LED framework, for the purpose of providing typically expected feedback of battery charging/fully charged status and AC/USB power supply online status. (Note that specific details of the indication (including whether to use it at all) are fully controllable by -user and/or specific machine defaults, per design principles of LED -framework). +user and/or specific machine defaults, per design principles of the LED +framework.) Attributes/properties ~~~~~~~~~~~~~~~~~~~~~ -Power supply class has predefined set of attributes, this eliminates code -duplication across drivers. Power supply class insist on reusing its +The power supply class has a predefined set of attributes. This eliminates code +duplication across drivers. The power supply class insists on reusing its predefined attributes *and* their units. -So, userspace gets predictable set of attributes and their units for any +So, userspace gets a predictable set of attributes and their units for any kind of power supply, and can process/present them to a user in consistent manner. Results for different power supplies and machines are also directly comparable. @@ -61,7 +61,7 @@ Attributes/properties detailed | **Charge/Energy/Capacity - how to not confuse** | +--------------------------------------------------------------------------+ | **Because both "charge" (µAh) and "energy" (µWh) represents "capacity" | -| of battery, this class distinguish these terms. Don't mix them!** | +| of battery, this class distinguishes these terms. Don't mix them!** | | | | - `CHARGE_*` | | attributes represents capacity in µAh only. | @@ -81,7 +81,7 @@ _NOW STATUS this attribute represents operating status (charging, full, - discharging (i.e. powering a load), etc.). This corresponds to + discharging (i.e., powering a load), etc.). This corresponds to `BATTERY_STATUS_*` values, as defined in battery.h. CHARGE_TYPE @@ -92,10 +92,10 @@ CHARGE_TYPE AUTHENTIC indicates the power supply (battery or charger) connected - to the platform is authentic(1) or non authentic(0). + to the platform is authentic(1) or non-authentic(0). HEALTH - represents health of the battery, values corresponds to + represents health of the battery. Values corresponds to POWER_SUPPLY_HEALTH_*, defined in battery.h. VOLTAGE_OCV @@ -103,11 +103,11 @@ VOLTAGE_OCV VOLTAGE_MAX_DESIGN, VOLTAGE_MIN_DESIGN design values for maximal and minimal power supply voltages. - Maximal/minimal means values of voltages when battery considered + Maximal/minimal means values of voltages when battery is considered "full"/"empty" at normal conditions. Yes, there is no direct relation between voltage and battery capacity, but some dumb batteries use voltage for very approximated calculation of capacity. - Battery driver also can use this attribute just to inform userspace + A battery driver also can use this attribute just to inform userspace about maximal and minimal voltage thresholds of a given battery. VOLTAGE_MAX, VOLTAGE_MIN @@ -122,16 +122,16 @@ CURRENT_BOOT Reports the current measured during boot CHARGE_FULL_DESIGN, CHARGE_EMPTY_DESIGN - design charge values, when battery considered full/empty. + design charge values, when battery is considered full/empty. ENERGY_FULL_DESIGN, ENERGY_EMPTY_DESIGN same as above but for energy. CHARGE_FULL, CHARGE_EMPTY - These attributes means "last remembered value of charge when battery - became full/empty". It also could mean "value of charge when battery + These attributes mean "last remembered value of charge when battery + became full/empty". They also could mean "value of charge when battery is considered full/empty at given conditions (temperature, age)". - I.e. these attributes represents real thresholds, not design values. + I.e., these attributes represents real thresholds, not design values. ENERGY_FULL, ENERGY_EMPTY same as above but for energy. @@ -153,12 +153,12 @@ CHARGE_TERM_CURRENT CONSTANT_CHARGE_CURRENT constant charge current programmed by charger. - CONSTANT_CHARGE_CURRENT_MAX maximum charge current supported by the power supply object. CONSTANT_CHARGE_VOLTAGE constant charge voltage programmed by charger. + CONSTANT_CHARGE_VOLTAGE_MAX maximum charge voltage supported by the power supply object. @@ -208,10 +208,10 @@ TEMP_MAX TIME_TO_EMPTY seconds left for battery to be considered empty - (i.e. while battery powers a load) + (i.e., while battery powers a load) TIME_TO_FULL seconds left for battery to be considered full - (i.e. while battery is charging) + (i.e., while battery is charging) Battery <-> external power supply interaction @@ -220,13 +220,13 @@ Often power supplies are acting as supplies and supplicants at the same time. Batteries are good example. So, batteries usually care if they're externally powered or not. -For that case, power supply class implements notification mechanism for +For that case, the power supply class implements a notification mechanism for batteries. -External power supply (AC) lists supplicants (batteries) names in +An external power supply (AC) lists supplicants (batteries) names in "supplied_to" struct member, and each power_supply_changed() call -issued by external power supply will notify supplicants via -external_power_changed callback. +issued by an external power supply will notify supplicants via +the external_power_changed callback. Devicetree battery characteristics @@ -241,14 +241,14 @@ battery node have names corresponding to elements in enum power_supply_property, for naming consistency between sysfs attributes and battery node properties. -QA -~~ +Q&A +~~~ Q: Where is POWER_SUPPLY_PROP_XYZ attribute? A: - If you cannot find attribute suitable for your driver needs, feel free - to add it and send patch along with your driver. + If you cannot find an attribute suitable for your driver needs, feel free + to add it and send a patch along with your driver. The attributes available currently are the ones currently provided by the drivers written. @@ -258,18 +258,18 @@ A: Q: - I have some very specific attribute (e.g. battery color), should I add + I have some very specific attribute (e.g., battery color). Should I add this attribute to standard ones? A: Most likely, no. Such attribute can be placed in the driver itself, if - it is useful. Of course, if the attribute in question applicable to - large set of batteries, provided by many drivers, and/or comes from + it is useful. Of course, if the attribute in question is applicable to + a large set of batteries, provided by many drivers, and/or comes from some general battery specification/standard, it may be a candidate to be added to the core attribute set. Q: - Suppose, my battery monitoring chip/firmware does not provides capacity + Suppose my battery monitoring chip/firmware does not provide capacity in percents, but provides charge_{now,full,empty}. Should I calculate percentage capacity manually, inside the driver, and register CAPACITY attribute? The same question about time_to_empty/time_to_full. @@ -278,11 +278,11 @@ A: directly measurable by the specific hardware available. Inferring not available properties using some heuristics or mathematical - model is not subject of work for a battery driver. Such functionality + model is not a subject of work for a battery driver. Such functionality should be factored out, and in fact, apm_power, the driver to serve - legacy APM API on top of power supply class, uses a simple heuristic of + legacy APM API on top of the power supply class, uses a simple heuristic of approximating remaining battery capacity based on its charge, current, - voltage and so on. But full-fledged battery model is likely not subject - for kernel at all, as it would require floating point calculation to deal - with things like differential equations and Kalman filters. This is + voltage and so on. But a full-fledged battery model is likely not a subject + for the kernel at all, as it would require floating point calculations to + deal with things like differential equations and Kalman filters. This is better be handled by batteryd/libbattery, yet to be written. diff --git a/Documentation/power/runtime_pm.rst b/Documentation/power/runtime_pm.rst index c8dbdb8595e5a4..455b9d135d8556 100644 --- a/Documentation/power/runtime_pm.rst +++ b/Documentation/power/runtime_pm.rst @@ -443,13 +443,11 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: necessary to execute the subsystem-level resume callback for the device to satisfy that request, otherwise 0 is returned - `int pm_runtime_barrier(struct device *dev);` + `void pm_runtime_barrier(struct device *dev);` - check if there's a resume request pending for the device and resume it (synchronously) in that case, cancel any other pending runtime PM requests regarding it and wait for all runtime PM operations on it in progress to - complete; returns 1 if there was a resume request pending and it was - necessary to execute the subsystem-level resume callback for the device to - satisfy that request, otherwise 0 is returned + complete `void pm_suspend_ignore_children(struct device *dev, bool enable);` - set/unset the power.ignore_children flag of the device @@ -480,16 +478,6 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h: `bool pm_runtime_status_suspended(struct device *dev);` - return true if the device's runtime PM status is 'suspended' - `void pm_runtime_allow(struct device *dev);` - - set the power.runtime_auto flag for the device and decrease its usage - counter (used by the /sys/devices/.../power/control interface to - effectively allow the device to be power managed at run time) - - `void pm_runtime_forbid(struct device *dev);` - - unset the power.runtime_auto flag for the device and increase its usage - counter (used by the /sys/devices/.../power/control interface to - effectively prevent the device from being power managed at run time) - `void pm_runtime_no_callbacks(struct device *dev);` - set the power.no_callbacks flag for the device and remove the runtime PM attributes from /sys/devices/.../power (or prevent them from being diff --git a/Documentation/power/shutdown-debugging.rst b/Documentation/power/shutdown-debugging.rst new file mode 100644 index 00000000000000..c510122e0bbc25 --- /dev/null +++ b/Documentation/power/shutdown-debugging.rst @@ -0,0 +1,53 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Debugging Kernel Shutdown Hangs with pstore ++++++++++++++++++++++++++++++++++++++++++++ + +Overview +======== +If the system hangs while shutting down, the kernel logs may need to be +retrieved to debug the issue. + +On systems that have a UART available, it is best to configure the kernel to use +this UART for kernel console output. + +If a UART isn't available, the ``pstore`` subsystem provides a mechanism to +persist this data across a system reset, allowing it to be retrieved on the next +boot. + +Kernel Configuration +==================== +To enable ``pstore`` and enable saving kernel ring buffer logs, set the +following kernel configuration options: + +* ``CONFIG_PSTORE=y`` +* ``CONFIG_PSTORE_CONSOLE=y`` + +Additionally, enable a backend to store the data. Depending upon your platform +some potential options include: + +* ``CONFIG_EFI_VARS_PSTORE=y`` +* ``CONFIG_PSTORE_RAM=y`` +* ``CONFIG_CHROMEOS_PSTORE=y`` +* ``CONFIG_PSTORE_BLK=y`` + +Kernel Command-line Parameters +============================== +Add these parameters to your kernel command line: + +* ``printk.always_kmsg_dump=Y`` + * Forces the kernel to dump the entire message buffer to pstore during + shutdown +* ``efi_pstore.pstore_disable=N`` + * For EFI-based systems, ensures the EFI backend is active + +Userspace Interaction and Log Retrieval +======================================= +On the next boot after a hang, pstore logs will be available in the pstore +filesystem (``/sys/fs/pstore``) and can be retrieved by userspace. + +On systemd systems, the ``systemd-pstore`` service will help do the following: + +#. Locate pstore data in ``/sys/fs/pstore`` +#. Read and save it to ``/var/lib/systemd/pstore`` +#. Clear pstore data for the next event diff --git a/Documentation/process/2.Process.rst b/Documentation/process/2.Process.rst index ef3b116492df08..7bd41838a5464f 100644 --- a/Documentation/process/2.Process.rst +++ b/Documentation/process/2.Process.rst @@ -13,24 +13,19 @@ how the process works is required in order to be an effective part of it. The big picture --------------- -The kernel developers use a loosely time-based release process, with a new -major kernel release happening every two or three months. The recent -release history looks like this: - - ====== ================= - 5.0 March 3, 2019 - 5.1 May 5, 2019 - 5.2 July 7, 2019 - 5.3 September 15, 2019 - 5.4 November 24, 2019 - 5.5 January 6, 2020 - ====== ================= - -Every 5.x release is a major kernel release with new features, internal -API changes, and more. A typical release can contain about 13,000 -changesets with changes to several hundred thousand lines of code. 5.x is -the leading edge of Linux kernel development; the kernel uses a -rolling development model which is continually integrating major changes. +The Linux kernel uses a loosely time-based, rolling release development +model. A new major kernel release (which we will call, as an example, 9.x) +[1]_ happens every two or three months, which comes with new features, +internal API changes, and more. A typical release can contain about 13,000 +changesets with changes to several hundred thousand lines of code. Recent +releases, along with their dates, can be found at `Wikipedia +`_. + +.. [1] Strictly speaking, the Linux kernel does not use semantic versioning + number scheme, but rather the 9.x pair identifies major release + version as a whole number. For each release, x is incremented, + but 9 is incremented only if x is deemed large enough (e.g. + Linux 5.0 is released following Linux 4.20). A relatively straightforward discipline is followed with regard to the merging of patches for each release. At the beginning of each development @@ -48,9 +43,9 @@ detail later on). The merge window lasts for approximately two weeks. At the end of this time, Linus Torvalds will declare that the window is closed and release the -first of the "rc" kernels. For the kernel which is destined to be 5.6, +first of the "rc" kernels. For the kernel which is destined to be 9.x, for example, the release which happens at the end of the merge window will -be called 5.6-rc1. The -rc1 release is the signal that the time to +be called 9.x-rc1. The -rc1 release is the signal that the time to merge new features has passed, and that the time to stabilize the next kernel has begun. @@ -99,13 +94,15 @@ release is made. In the real world, this kind of perfection is hard to achieve; there are just too many variables in a project of this size. There comes a point where delaying the final release just makes the problem worse; the pile of changes waiting for the next merge window will grow -larger, creating even more regressions the next time around. So most 5.x -kernels go out with a handful of known regressions though, hopefully, none -of them are serious. +larger, creating even more regressions the next time around. So most kernels +go out with a handful of known regressions, though, hopefully, none of them +are serious. Once a stable release is made, its ongoing maintenance is passed off to the -"stable team," currently Greg Kroah-Hartman. The stable team will release -occasional updates to the stable release using the 5.x.y numbering scheme. +"stable team," currently consists of Greg Kroah-Hartman and Sasha Levin. The +stable team will release occasional updates to the stable release using the +9.x.y numbering scheme. + To be considered for an update release, a patch must (1) fix a significant bug, and (2) already be merged into the mainline for the next development kernel. Kernels will typically receive stable updates for a little more diff --git a/Documentation/process/coding-style.rst b/Documentation/process/coding-style.rst index d1a8e5465ed956..2969ca378dbb29 100644 --- a/Documentation/process/coding-style.rst +++ b/Documentation/process/coding-style.rst @@ -76,7 +76,7 @@ Don't use commas to avoid using braces: if (condition) do_this(), do_that(); -Always uses braces for multiple statements: +Always use braces for multiple statements: .. code-block:: c diff --git a/Documentation/process/maintainer-soc.rst b/Documentation/process/maintainer-soc.rst index 3ba886f52a51d1..7d6bad989ad885 100644 --- a/Documentation/process/maintainer-soc.rst +++ b/Documentation/process/maintainer-soc.rst @@ -57,8 +57,10 @@ Submitting Patches for Given SoC All typical platform related patches should be sent via SoC submaintainers (platform-specific maintainers). This includes also changes to per-platform or -shared defconfigs (scripts/get_maintainer.pl might not provide correct -addresses in such case). +shared defconfigs. Note that scripts/get_maintainer.pl might not provide +correct addresses for the shared defconfig, so ignore its output and manually +create CC-list based on MAINTAINERS file or use something like +``scripts/get_maintainer.pl -f drivers/soc/FOO/``). Submitting Patches to the Main SoC Maintainers ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -114,9 +116,9 @@ coordinating how the changes get merged through different maintainer trees. Usually the branch that includes a driver change will also include the corresponding change to the devicetree binding description, to ensure they are in fact compatible. This means that the devicetree branch can end up causing -warnings in the "make dtbs_check" step. If a devicetree change depends on +warnings in the ``make dtbs_check`` step. If a devicetree change depends on missing additions to a header file in include/dt-bindings/, it will fail the -"make dtbs" step and not get merged. +``make dtbs`` step and not get merged. There are multiple ways to deal with this: diff --git a/Documentation/process/submitting-patches.rst b/Documentation/process/submitting-patches.rst index 910e8fc9e3c806..9a509f1a68730c 100644 --- a/Documentation/process/submitting-patches.rst +++ b/Documentation/process/submitting-patches.rst @@ -592,8 +592,9 @@ Both Tested-by and Reviewed-by tags, once received on mailing list from tester or reviewer, should be added by author to the applicable patches when sending next versions. However if the patch has changed substantially in following version, these tags might not be applicable anymore and thus should be removed. -Usually removal of someone's Tested-by or Reviewed-by tags should be mentioned -in the patch changelog (after the '---' separator). +Usually removal of someone's Acked-by, Tested-by or Reviewed-by tags should be +mentioned in the patch changelog with an explanation (after the '---' +separator). A Suggested-by: tag indicates that the patch idea is suggested by the person named and ensures credit to the person for the idea: if we diligently credit diff --git a/Documentation/rust/quick-start.rst b/Documentation/rust/quick-start.rst index 155f7107329a97..152289f0bed2fa 100644 --- a/Documentation/rust/quick-start.rst +++ b/Documentation/rust/quick-start.rst @@ -39,8 +39,8 @@ of the box, e.g.:: Debian ****** -Debian Testing and Debian Unstable (Sid), outside of the freeze period, provide -recent Rust releases and thus they should generally work out of the box, e.g.:: +Debian 13 (Trixie), as well as Testing and Debian Unstable (Sid) provide recent +Rust releases and thus they should generally work out of the box, e.g.:: apt install rustc rust-src bindgen rustfmt rust-clippy diff --git a/Documentation/security/keys/trusted-encrypted.rst b/Documentation/security/keys/trusted-encrypted.rst index f4d7e162d5e475..eae6a36b1c9a11 100644 --- a/Documentation/security/keys/trusted-encrypted.rst +++ b/Documentation/security/keys/trusted-encrypted.rst @@ -10,6 +10,37 @@ of a Trust Source for greater security, while Encrypted Keys can be used on any system. All user level blobs, are displayed and loaded in hex ASCII for convenience, and are integrity verified. +Trusted Keys as Protected key +============================= +It is the secure way of keeping the keys in the kernel key-ring as Trusted-Key, +such that: + +- Key-blob, an encrypted key-data, created to be stored, loaded and seen by + userspace. +- Key-data, the plain-key text in the system memory, to be used by + kernel space only. + +Though key-data is not accessible to the user-space in plain-text, but it is in +plain-text in system memory, when used in kernel space. Even though kernel-space +attracts small surface attack, but with compromised kernel or side-channel +attack accessing the system memory can lead to a chance of the key getting +compromised/leaked. + +In order to protect the key in kernel space, the concept of "protected-keys" is +introduced which will act as an added layer of protection. The key-data of the +protected keys is encrypted with Key-Encryption-Key(KEK), and decrypted inside +the trust source boundary. The plain-key text never available out-side in the +system memory. Thus, any crypto operation that is to be executed using the +protected key, can only be done by the trust source, which generated the +key blob. + +Hence, if the protected-key is leaked or compromised, it is of no use to the +hacker. + +Trusted keys as protected keys, with trust source having the capability of +generating: + +- Key-Blob, to be loaded, stored and seen by user-space. Trust Source ============ @@ -252,7 +283,7 @@ in bytes. Trusted Keys can be 32 - 128 bytes (256 - 1024 bits). Trusted Keys usage: CAAM ------------------------ -Usage:: +Trusted Keys Usage:: keyctl add trusted name "new keylen" ring keyctl add trusted name "load hex_blob" ring @@ -262,6 +293,21 @@ Usage:: CAAM-specific format. The key length for new keys is always in bytes. Trusted Keys can be 32 - 128 bytes (256 - 1024 bits). +Trusted Keys as Protected Keys Usage:: + + keyctl add trusted name "new keylen pk [options]" ring + keyctl add trusted name "load hex_blob [options]" ring + keyctl print keyid + + where, 'pk' is used to direct trust source to generate protected key. + + options: + key_enc_algo = For CAAM, supported enc algo are ECB(2), CCM(1). + +"keyctl print" returns an ASCII hex copy of the sealed key, which is in a +CAAM-specific format. The key length for new keys is always in bytes. +Trusted Keys can be 32 - 128 bytes (256 - 1024 bits). + Trusted Keys usage: DCP ----------------------- @@ -343,6 +389,46 @@ Load a trusted key from the saved blob:: f1f8fff03ad0acb083725535636addb08d73dedb9832da198081e5deae84bfaf0409c22b e4a8aea2b607ec96931e6f4d4fe563ba +Create and save a trusted key as protected key named "kmk" of length 32 bytes. + +:: + + $ keyctl add trusted kmk "new 32 pk key_enc_algo=1" @u + 440502848 + + $ keyctl show + Session Keyring + -3 --alswrv 500 500 keyring: _ses + 97833714 --alswrv 500 -1 \_ keyring: _uid.500 + 440502848 --alswrv 500 500 \_ trusted: kmk + + $ keyctl print 440502848 + 0101000000000000000001005d01b7e3f4a6be5709930f3b70a743cbb42e0cc95e18e915 + 3f60da455bbf1144ad12e4f92b452f966929f6105fd29ca28e4d4d5a031d068478bacb0b + 27351119f822911b0a11ba3d3498ba6a32e50dac7f32894dd890eb9ad578e4e292c83722 + a52e56a097e6a68b3f56f7a52ece0cdccba1eb62cad7d817f6dc58898b3ac15f36026fec + d568bd4a706cb60bb37be6d8f1240661199d640b66fb0fe3b079f97f450b9ef9c22c6d5d + dd379f0facd1cd020281dfa3c70ba21a3fa6fc2471dc6d13ecf8298b946f65345faa5ef0 + f1f8fff03ad0acb083725535636addb08d73dedb9832da198081e5deae84bfaf0409c22b + e4a8aea2b607ec96931e6f4d4fe563ba + + $ keyctl pipe 440502848 > kmk.blob + +Load a trusted key from the saved blob:: + + $ keyctl add trusted kmk "load `cat kmk.blob` key_enc_algo=1" @u + 268728824 + + $ keyctl print 268728824 + 0101000000000000000001005d01b7e3f4a6be5709930f3b70a743cbb42e0cc95e18e915 + 3f60da455bbf1144ad12e4f92b452f966929f6105fd29ca28e4d4d5a031d068478bacb0b + 27351119f822911b0a11ba3d3498ba6a32e50dac7f32894dd890eb9ad578e4e292c83722 + a52e56a097e6a68b3f56f7a52ece0cdccba1eb62cad7d817f6dc58898b3ac15f36026fec + d568bd4a706cb60bb37be6d8f1240661199d640b66fb0fe3b079f97f450b9ef9c22c6d5d + dd379f0facd1cd020281dfa3c70ba21a3fa6fc2471dc6d13ecf8298b946f65345faa5ef0 + f1f8fff03ad0acb083725535636addb08d73dedb9832da198081e5deae84bfaf0409c22b + e4a8aea2b607ec96931e6f4d4fe563ba + Reseal (TPM specific) a trusted key under new PCR values:: $ keyctl update 268728824 "update pcrinfo=`cat pcr.blob`" diff --git a/Documentation/security/landlock.rst b/Documentation/security/landlock.rst index e0fc54aff09e76..3e4d4d04cfae4e 100644 --- a/Documentation/security/landlock.rst +++ b/Documentation/security/landlock.rst @@ -7,7 +7,7 @@ Landlock LSM: kernel documentation ================================== :Author: Mickaël Salaün -:Date: March 2025 +:Date: September 2025 Landlock's goal is to create scoped access-control (i.e. sandboxing). To harden a whole system, this feature should be available to any process, @@ -110,6 +110,12 @@ Filesystem .. kernel-doc:: security/landlock/fs.h :identifiers: +Process credential +------------------ + +.. kernel-doc:: security/landlock/cred.h + :identifiers: + Ruleset and domain ------------------ @@ -128,6 +134,9 @@ makes the reasoning much easier and helps avoid pitfalls. .. kernel-doc:: security/landlock/ruleset.h :identifiers: +.. kernel-doc:: security/landlock/domain.h + :identifiers: + Additional documentation ======================== diff --git a/Documentation/sphinx/kernel_abi.py b/Documentation/sphinx/kernel_abi.py index 4c4375201b9ec3..5667f207d175cd 100644 --- a/Documentation/sphinx/kernel_abi.py +++ b/Documentation/sphinx/kernel_abi.py @@ -14,7 +14,7 @@ :license: GPL Version 2, June 1991 see Linux/COPYING for details. The ``kernel-abi`` (:py:class:`KernelCmd`) directive calls the - scripts/get_abi.py script to parse the Kernel ABI files. + AbiParser class to parse the Kernel ABI files. Overview of directive's argument and options. @@ -43,9 +43,9 @@ from sphinx.util.docutils import switch_source_input from sphinx.util import logging srctree = os.path.abspath(os.environ["srctree"]) -sys.path.insert(0, os.path.join(srctree, "scripts/lib/abi")) +sys.path.insert(0, os.path.join(srctree, "tools/lib/python")) -from abi_parser import AbiParser +from abi.abi_parser import AbiParser __version__ = "1.0" diff --git a/Documentation/sphinx/kernel_feat.py b/Documentation/sphinx/kernel_feat.py index aaac76892cebb0..bdc0fef5c87f3e 100644 --- a/Documentation/sphinx/kernel_feat.py +++ b/Documentation/sphinx/kernel_feat.py @@ -13,7 +13,7 @@ :license: GPL Version 2, June 1991 see Linux/COPYING for details. The ``kernel-feat`` (:py:class:`KernelFeat`) directive calls the - scripts/get_feat.pl script to parse the Kernel ABI files. + tools/docs/get_feat.pl script to parse the Kernel ABI files. Overview of directive's argument and options. @@ -34,7 +34,6 @@ import codecs import os import re -import subprocess import sys from docutils import nodes, statemachine @@ -42,6 +41,11 @@ from docutils.statemachine import ViewList from docutils.parsers.rst import directives, Directive from sphinx.util.docutils import switch_source_input +srctree = os.path.abspath(os.environ["srctree"]) +sys.path.insert(0, os.path.join(srctree, "tools/lib/python")) + +from feat.parse_features import ParseFeature # pylint: disable=C0413 + def ErrorString(exc): # Shamelessly stolen from docutils return f'{exc.__class__.__name}: {exc}' @@ -84,18 +88,16 @@ class KernelFeat(Directive): srctree = os.path.abspath(os.environ["srctree"]) - args = [ - os.path.join(srctree, 'scripts/get_feat.pl'), - 'rest', - '--enable-fname', - '--dir', - os.path.join(srctree, 'Documentation', self.arguments[0]), - ] + feature_dir = os.path.join(srctree, 'Documentation', self.arguments[0]) - if len(self.arguments) > 1: - args.extend(['--arch', self.arguments[1]]) + feat = ParseFeature(feature_dir, False, True) + feat.parse() - lines = subprocess.check_output(args, cwd=os.path.dirname(doc.current_source)).decode('utf-8') + if len(self.arguments) > 1: + arch = self.arguments[1] + lines = feat.output_arch_table(arch) + else: + lines = feat.output_matrix() line_regex = re.compile(r"^\.\. FILE (\S+)$") diff --git a/Documentation/sphinx/kernel_include.py b/Documentation/sphinx/kernel_include.py index f94412cd17c96f..626762ff6af3c3 100755 --- a/Documentation/sphinx/kernel_include.py +++ b/Documentation/sphinx/kernel_include.py @@ -87,6 +87,8 @@ import os.path import re import sys +from difflib import get_close_matches + from docutils import io, nodes, statemachine from docutils.statemachine import ViewList from docutils.parsers.rst import Directive, directives @@ -95,15 +97,17 @@ from docutils.parsers.rst.directives.body import CodeBlock, NumberLines from sphinx.util import logging srctree = os.path.abspath(os.environ["srctree"]) -sys.path.insert(0, os.path.join(srctree, "tools/docs/lib")) +sys.path.insert(0, os.path.join(srctree, "tools/lib/python")) -from parse_data_structs import ParseDataStructs +from kdoc.parse_data_structs import ParseDataStructs __version__ = "1.0" logger = logging.getLogger(__name__) RE_DOMAIN_REF = re.compile(r'\\ :(ref|c:type|c:func):`([^<`]+)(?:<([^>]+)>)?`\\') RE_SIMPLE_REF = re.compile(r'`([^`]+)`') +RE_LINENO_REF = re.compile(r'^\s*-\s+LINENO_(\d+):\s+(.*)') +RE_SPLIT_DOMAIN = re.compile(r"(.*)\.(.*)") def ErrorString(exc): # Shamelessly stolen from docutils return f'{exc.__class__.__name}: {exc}' @@ -212,14 +216,16 @@ class KernelInclude(Directive): - a TOC table containing cross references. """ parser = ParseDataStructs() - parser.parse_file(path) if 'exception-file' in self.options: source_dir = os.path.dirname(os.path.abspath( self.state_machine.input_lines.source( self.lineno - self.state_machine.input_offset - 1))) exceptions_file = os.path.join(source_dir, self.options['exception-file']) - parser.process_exceptions(exceptions_file) + else: + exceptions_file = None + + parser.parse_file(path, exceptions_file) # Store references on a symbol dict to be used at check time if 'warn-broken' in self.options: @@ -242,23 +248,32 @@ class KernelInclude(Directive): # TOC output is a ReST file, not a literal. So, we can add line # numbers - rawtext = parser.gen_toc() + startline = self.options.get('start-line', None) + endline = self.options.get('end-line', None) - include_lines = statemachine.string2lines(rawtext, tab_width, - convert_whitespace=True) + relpath = os.path.relpath(path, srctree) - # Append line numbers data + result = ViewList() + for line in parser.gen_toc().split("\n"): + match = RE_LINENO_REF.match(line) + if not match: + result.append(line, path) + continue - startline = self.options.get('start-line', None) + ln, ref = match.groups() + ln = int(ln) - result = ViewList() - if startline and startline > 0: - offset = startline - 1 - else: - offset = 0 + # Filter line range if needed + if startline and (ln < startline): + continue + + if endline and (ln > endline): + continue - for ln, line in enumerate(include_lines, start=offset): - result.append(line, path, ln) + # Sphinx numerates starting with zero, but text editors + # and other tools start from one + realln = ln + 1 + result.append(f"- {ref}: {relpath}#{realln}", path, ln) self.state_machine.insert_input(result, path) @@ -388,6 +403,63 @@ class KernelInclude(Directive): # ============================================================================== reported = set() +DOMAIN_INFO = {} +all_refs = {} + +def fill_domain_info(env): + """ + Get supported reference types for each Sphinx domain and C namespaces + """ + if DOMAIN_INFO: + return + + for domain_name, domain_instance in env.domains.items(): + try: + object_types = list(domain_instance.object_types.keys()) + DOMAIN_INFO[domain_name] = object_types + except AttributeError: + # Ignore domains that we can't retrieve object types, if any + pass + + for domain in DOMAIN_INFO.keys(): + domain_obj = env.get_domain(domain) + for name, dispname, objtype, docname, anchor, priority in domain_obj.get_objects(): + ref_name = name.lower() + + if domain == "c": + if '.' in ref_name: + ref_name = ref_name.split(".")[-1] + + if not ref_name in all_refs: + all_refs[ref_name] = [] + + all_refs[ref_name].append(f"\t{domain}:{objtype}:`{name}` (from {docname})") + +def get_suggestions(app, env, node, + original_target, original_domain, original_reftype): + """Check if target exists in the other domain or with different reftypes.""" + original_target = original_target.lower() + + # Remove namespace if present + if original_domain == "c": + if '.' in original_target: + original_target = original_target.split(".")[-1] + + suggestions = [] + + # If name exists, propose exact name match on different domains + if original_target in all_refs: + return all_refs[original_target] + + # If not found, get a close match, using difflib. + # Such method is based on Ratcliff-Obershelp Algorithm, which seeks + # for a close match within a certain distance. We're using the defaults + # here, e.g. cutoff=0.6, proposing 3 alternatives + matches = get_close_matches(original_target, all_refs.keys()) + for match in matches: + suggestions += all_refs[match] + + return suggestions def check_missing_refs(app, env, node, contnode): """Check broken refs for the files it creates xrefs""" @@ -404,11 +476,13 @@ def check_missing_refs(app, env, node, contnode): if node.source not in xref_files: return None + fill_domain_info(env) + target = node.get('reftarget', '') domain = node.get('refdomain', 'std') reftype = node.get('reftype', '') - msg = f"can't link to: {domain}:{reftype}:: {target}" + msg = f"Invalid xref: {domain}:{reftype}:`{target}`" # Don't duplicate warnings data = (node.source, msg) @@ -416,6 +490,10 @@ def check_missing_refs(app, env, node, contnode): return None reported.add(data) + suggestions = get_suggestions(app, env, node, target, domain, reftype) + if suggestions: + msg += ". Possible alternatives:\n" + '\n'.join(suggestions) + logger.warning(msg, location=node, type='ref', subtype='missing') return None diff --git a/Documentation/sphinx/kerneldoc-preamble.sty b/Documentation/sphinx/kerneldoc-preamble.sty index 5d68395539fe92..16d9ff46fdf680 100644 --- a/Documentation/sphinx/kerneldoc-preamble.sty +++ b/Documentation/sphinx/kerneldoc-preamble.sty @@ -220,7 +220,7 @@ If you want them, please install non-variable ``Noto Sans CJK'' font families along with the texlive-xecjk package by following instructions from - \sphinxcode{./scripts/sphinx-pre-install}. + \sphinxcode{./tools/docs/sphinx-pre-install}. Having optional non-variable ``Noto Serif CJK'' font families will improve the looks of those translations. \end{sphinxadmonition}} diff --git a/Documentation/sphinx/kerneldoc.py b/Documentation/sphinx/kerneldoc.py index 2586b4d4e494d7..d8cdf068ef35cf 100644 --- a/Documentation/sphinx/kerneldoc.py +++ b/Documentation/sphinx/kerneldoc.py @@ -42,10 +42,10 @@ from sphinx.util import logging from pprint import pformat srctree = os.path.abspath(os.environ["srctree"]) -sys.path.insert(0, os.path.join(srctree, "scripts/lib/kdoc")) +sys.path.insert(0, os.path.join(srctree, "tools/lib/python")) -from kdoc_files import KernelFiles -from kdoc_output import RestFormat +from kdoc.kdoc_files import KernelFiles +from kdoc.kdoc_output import RestFormat __version__ = '1.0' kfiles = None diff --git a/Documentation/sphinx/load_config.py b/Documentation/sphinx/load_config.py deleted file mode 100644 index 1afb0c97f06bd3..00000000000000 --- a/Documentation/sphinx/load_config.py +++ /dev/null @@ -1,60 +0,0 @@ -# -*- coding: utf-8; mode: python -*- -# SPDX-License-Identifier: GPL-2.0 -# pylint: disable=R0903, C0330, R0914, R0912, E0401 - -import os -import sys -from sphinx.util.osutil import fs_encoding - -# ------------------------------------------------------------------------------ -def loadConfig(namespace): -# ------------------------------------------------------------------------------ - - """Load an additional configuration file into *namespace*. - - The name of the configuration file is taken from the environment - ``SPHINX_CONF``. The external configuration file extends (or overwrites) the - configuration values from the origin ``conf.py``. With this you are able to - maintain *build themes*. """ - - config_file = os.environ.get("SPHINX_CONF", None) - if (config_file is not None - and os.path.normpath(namespace["__file__"]) != os.path.normpath(config_file) ): - config_file = os.path.abspath(config_file) - - # Let's avoid one conf.py file just due to latex_documents - start = config_file.find('Documentation/') - if start >= 0: - start = config_file.find('/', start + 1) - - end = config_file.rfind('/') - if start >= 0 and end > 0: - dir = config_file[start + 1:end] - - print("source directory: %s" % dir) - new_latex_docs = [] - latex_documents = namespace['latex_documents'] - - for l in latex_documents: - if l[0].find(dir + '/') == 0: - has = True - fn = l[0][len(dir) + 1:] - new_latex_docs.append((fn, l[1], l[2], l[3], l[4])) - break - - namespace['latex_documents'] = new_latex_docs - - # If there is an extra conf.py file, load it - if os.path.isfile(config_file): - sys.stdout.write("load additional sphinx-config: %s\n" % config_file) - config = namespace.copy() - config['__file__'] = config_file - with open(config_file, 'rb') as f: - code = compile(f.read(), fs_encoding, 'exec') - exec(code, config) - del config['__file__'] - namespace.update(config) - else: - config = namespace.copy() - config['tags'].add("subproject") - namespace.update(config) diff --git a/Documentation/sphinx/parallel-wrapper.sh b/Documentation/sphinx/parallel-wrapper.sh deleted file mode 100644 index e54c44ce117d51..00000000000000 --- a/Documentation/sphinx/parallel-wrapper.sh +++ /dev/null @@ -1,33 +0,0 @@ -#!/bin/sh -# SPDX-License-Identifier: GPL-2.0+ -# -# Figure out if we should follow a specific parallelism from the make -# environment (as exported by scripts/jobserver-exec), or fall back to -# the "auto" parallelism when "-jN" is not specified at the top-level -# "make" invocation. - -sphinx="$1" -shift || true - -parallel="$PARALLELISM" -if [ -z "$parallel" ] ; then - # If no parallelism is specified at the top-level make, then - # fall back to the expected "-jauto" mode that the "htmldocs" - # target has had. - auto=$(perl -e 'open IN,"'"$sphinx"' --version 2>&1 |"; - while () { - if (m/([\d\.]+)/) { - print "auto" if ($1 >= "1.7") - } - } - close IN') - if [ -n "$auto" ] ; then - parallel="$auto" - fi -fi -# Only if some parallelism has been determined do we add the -jN option. -if [ -n "$parallel" ] ; then - parallel="-j$parallel" -fi - -exec "$sphinx" $parallel "$@" diff --git a/Documentation/tools/rtla/common_appendix.rst b/Documentation/tools/rtla/common_appendix.rst deleted file mode 100644 index 53cae753753771..00000000000000 --- a/Documentation/tools/rtla/common_appendix.rst +++ /dev/null @@ -1,24 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -EXIT STATUS -=========== - -:: - - 0 Passed: the test did not hit the stop tracing condition - 1 Error: invalid argument - 2 Failed: the test hit the stop tracing condition - -REPORTING BUGS -============== -Report bugs to -and - -LICENSE -======= -**rtla** is Free Software licensed under the GNU GPLv2 - -COPYING -======= -Copyright \(C) 2021 Red Hat, Inc. Free use of this software is granted under -the terms of the GNU Public License (GPL). diff --git a/Documentation/tools/rtla/common_appendix.txt b/Documentation/tools/rtla/common_appendix.txt new file mode 100644 index 00000000000000..53cae753753771 --- /dev/null +++ b/Documentation/tools/rtla/common_appendix.txt @@ -0,0 +1,24 @@ +.. SPDX-License-Identifier: GPL-2.0 + +EXIT STATUS +=========== + +:: + + 0 Passed: the test did not hit the stop tracing condition + 1 Error: invalid argument + 2 Failed: the test hit the stop tracing condition + +REPORTING BUGS +============== +Report bugs to +and + +LICENSE +======= +**rtla** is Free Software licensed under the GNU GPLv2 + +COPYING +======= +Copyright \(C) 2021 Red Hat, Inc. Free use of this software is granted under +the terms of the GNU Public License (GPL). diff --git a/Documentation/tools/rtla/common_hist_options.rst b/Documentation/tools/rtla/common_hist_options.rst deleted file mode 100644 index df53ff835bfb66..00000000000000 --- a/Documentation/tools/rtla/common_hist_options.rst +++ /dev/null @@ -1,23 +0,0 @@ -**-b**, **--bucket-size** *N* - - Set the histogram bucket size (default *1*). - -**-E**, **--entries** *N* - - Set the number of entries of the histogram (default 256). - -**--no-header** - - Do not print header. - -**--no-summary** - - Do not print summary. - -**--no-index** - - Do not print index. - -**--with-zeros** - - Print zero only entries. diff --git a/Documentation/tools/rtla/common_hist_options.txt b/Documentation/tools/rtla/common_hist_options.txt new file mode 100644 index 00000000000000..df53ff835bfb66 --- /dev/null +++ b/Documentation/tools/rtla/common_hist_options.txt @@ -0,0 +1,23 @@ +**-b**, **--bucket-size** *N* + + Set the histogram bucket size (default *1*). + +**-E**, **--entries** *N* + + Set the number of entries of the histogram (default 256). + +**--no-header** + + Do not print header. + +**--no-summary** + + Do not print summary. + +**--no-index** + + Do not print index. + +**--with-zeros** + + Print zero only entries. diff --git a/Documentation/tools/rtla/common_options.rst b/Documentation/tools/rtla/common_options.rst deleted file mode 100644 index 77ef35d3f83171..00000000000000 --- a/Documentation/tools/rtla/common_options.rst +++ /dev/null @@ -1,119 +0,0 @@ -**-c**, **--cpus** *cpu-list* - - Set the osnoise tracer to run the sample threads in the cpu-list. - -**-H**, **--house-keeping** *cpu-list* - - Run rtla control threads only on the given cpu-list. - -**-d**, **--duration** *time[s|m|h|d]* - - Set the duration of the session. - -**-D**, **--debug** - - Print debug info. - -**-e**, **--event** *sys:event* - - Enable an event in the trace (**-t**) session. The argument can be a specific event, e.g., **-e** *sched:sched_switch*, or all events of a system group, e.g., **-e** *sched*. Multiple **-e** are allowed. It is only active when **-t** or **-a** are set. - -**--filter** ** - - Filter the previous **-e** *sys:event* event with **. For further information about event filtering see https://www.kernel.org/doc/html/latest/trace/events.html#event-filtering. - -**--trigger** ** - Enable a trace event trigger to the previous **-e** *sys:event*. - If the *hist:* trigger is activated, the output histogram will be automatically saved to a file named *system_event_hist.txt*. - For example, the command: - - rtla -t -e osnoise:irq_noise --trigger="hist:key=desc,duration/1000:sort=desc,duration/1000:vals=hitcount" - - Will automatically save the content of the histogram associated to *osnoise:irq_noise* event in *osnoise_irq_noise_hist.txt*. - - For further information about event trigger see https://www.kernel.org/doc/html/latest/trace/events.html#event-triggers. - -**-P**, **--priority** *o:prio|r:prio|f:prio|d:runtime:period* - - Set scheduling parameters to the osnoise tracer threads, the format to set the priority are: - - - *o:prio* - use SCHED_OTHER with *prio*; - - *r:prio* - use SCHED_RR with *prio*; - - *f:prio* - use SCHED_FIFO with *prio*; - - *d:runtime[us|ms|s]:period[us|ms|s]* - use SCHED_DEADLINE with *runtime* and *period* in nanoseconds. - -**-C**, **--cgroup**\[*=cgroup*] - - Set a *cgroup* to the tracer's threads. If the **-C** option is passed without arguments, the tracer's thread will inherit **rtla**'s *cgroup*. Otherwise, the threads will be placed on the *cgroup* passed to the option. - -**--warm-up** *s* - - After starting the workload, let it run for *s* seconds before starting collecting the data, allowing the system to warm-up. Statistical data generated during warm-up is discarded. - -**--trace-buffer-size** *kB* - Set the per-cpu trace buffer size in kB for the tracing output. - -**--on-threshold** *action* - - Defines an action to be executed when tracing is stopped on a latency threshold - specified by |threshold|. - - Multiple --on-threshold actions may be specified, and they will be executed in - the order they are provided. If any action fails, subsequent actions in the list - will not be executed. - - Supported actions are: - - - *trace[,file=]* - - Saves trace output, optionally taking a filename. Alternative to -t/--trace. - Note that nlike -t/--trace, specifying this multiple times will result in - the trace being saved multiple times. - - - *signal,num=,pid=* - - Sends signal to process. "parent" might be specified in place of pid to target - the parent process of rtla. - - - *shell,command=* - - Execute shell command. - - - *continue* - - Continue tracing after actions are executed instead of stopping. - - Example: - - $ rtla |tool| |thresharg| 20 --on-threshold trace - --on-threshold shell,command="grep ipi_send |tracer|\_trace.txt" - --on-threshold signal,num=2,pid=parent - - This will save a trace with the default filename "|tracer|\_trace.txt", print its - lines that contain the text "ipi_send" on standard output, and send signal 2 - (SIGINT) to the parent process. - - Performance Considerations: - - |actionsperf| - -**--on-end** *action* - - Defines an action to be executed at the end of tracing. - - Multiple --on-end actions can be specified, and they will be executed in the order - they are provided. If any action fails, subsequent actions in the list will not be - executed. - - See the documentation for **--on-threshold** for the list of supported actions, with - the exception that *continue* has no effect. - - Example: - - $ rtla |tool| -d 5s --on-end trace - - This runs rtla with the default options, and saves trace output at the end. - -**-h**, **--help** - - Print help menu. diff --git a/Documentation/tools/rtla/common_options.txt b/Documentation/tools/rtla/common_options.txt new file mode 100644 index 00000000000000..6caa51d0293475 --- /dev/null +++ b/Documentation/tools/rtla/common_options.txt @@ -0,0 +1,129 @@ +**-c**, **--cpus** *cpu-list* + + Set the |tool| tracer to run the sample threads in the cpu-list. + + By default, the |tool| tracer runs the sample threads on all CPUs. + +**-H**, **--house-keeping** *cpu-list* + + Run rtla control threads only on the given cpu-list. + + If omitted, rtla will attempt to auto-migrate its main thread to any CPU that is not running any workload threads. + +**-d**, **--duration** *time[s|m|h|d]* + + Set the duration of the session. + +**-D**, **--debug** + + Print debug info. + +**-e**, **--event** *sys:event* + + Enable an event in the trace (**-t**) session. The argument can be a specific event, e.g., **-e** *sched:sched_switch*, or all events of a system group, e.g., **-e** *sched*. Multiple **-e** are allowed. It is only active when **-t** or **-a** are set. + +**--filter** ** + + Filter the previous **-e** *sys:event* event with **. For further information about event filtering see https://www.kernel.org/doc/html/latest/trace/events.html#event-filtering. + +**--trigger** ** + Enable a trace event trigger to the previous **-e** *sys:event*. + If the *hist:* trigger is activated, the output histogram will be automatically saved to a file named *system_event_hist.txt*. + For example, the command: + + rtla -t -e osnoise:irq_noise --trigger="hist:key=desc,duration/1000:sort=desc,duration/1000:vals=hitcount" + + Will automatically save the content of the histogram associated to *osnoise:irq_noise* event in *osnoise_irq_noise_hist.txt*. + + For further information about event trigger see https://www.kernel.org/doc/html/latest/trace/events.html#event-triggers. + +**-P**, **--priority** *o:prio|r:prio|f:prio|d:runtime:period* + + Set scheduling parameters to the |tool| tracer threads, the format to set the priority are: + + - *o:prio* - use SCHED_OTHER with *prio*; + - *r:prio* - use SCHED_RR with *prio*; + - *f:prio* - use SCHED_FIFO with *prio*; + - *d:runtime[us|ms|s]:period[us|ms|s]* - use SCHED_DEADLINE with *runtime* and *period* in nanoseconds. + + If not set, tracer threads keep their default priority. For rtla user threads, it is set to SCHED_FIFO with priority 95. For kernel threads, see *osnoise* and *timerlat* tracer documentation for the running kernel version. + +**-C**, **--cgroup** \[*cgroup*] + + Set a *cgroup* to the tracer's threads. If the **-C** option is passed without arguments, the tracer's thread will inherit **rtla**'s *cgroup*. Otherwise, the threads will be placed on the *cgroup* passed to the option. + + If not set, the behavior differs between workload types. User workloads created by rtla will inherit rtla's cgroup. Kernel workloads are assigned the root cgroup. + +**--warm-up** *s* + + After starting the workload, let it run for *s* seconds before starting collecting the data, allowing the system to warm-up. Statistical data generated during warm-up is discarded. + +**--trace-buffer-size** *kB* + Set the per-cpu trace buffer size in kB for the tracing output. + + If not set, the default tracefs buffer size is used. + +**--on-threshold** *action* + + Defines an action to be executed when tracing is stopped on a latency threshold + specified by |threshold|. + + Multiple --on-threshold actions may be specified, and they will be executed in + the order they are provided. If any action fails, subsequent actions in the list + will not be executed. + + Supported actions are: + + - *trace[,file=]* + + Saves trace output, optionally taking a filename. Alternative to -t/--trace. + Note that unlike -t/--trace, specifying this multiple times will result in + the trace being saved multiple times. + + - *signal,num=,pid=* + + Sends signal to process. "parent" might be specified in place of pid to target + the parent process of rtla. + + - *shell,command=* + + Execute shell command. + + - *continue* + + Continue tracing after actions are executed instead of stopping. + + Example: + + $ rtla |tool| |thresharg| 20 --on-threshold trace + --on-threshold shell,command="grep ipi_send |tracer|\_trace.txt" + --on-threshold signal,num=2,pid=parent + + This will save a trace with the default filename "|tracer|\_trace.txt", print its + lines that contain the text "ipi_send" on standard output, and send signal 2 + (SIGINT) to the parent process. + + Performance Considerations: + + |actionsperf| + +**--on-end** *action* + + Defines an action to be executed at the end of tracing. + + Multiple --on-end actions can be specified, and they will be executed in the order + they are provided. If any action fails, subsequent actions in the list will not be + executed. + + See the documentation for **--on-threshold** for the list of supported actions, with + the exception that *continue* has no effect. + + Example: + + $ rtla |tool| -d 5s --on-end trace + + This runs rtla with the default options, and saves trace output at the end. + +**-h**, **--help** + + Print help menu. diff --git a/Documentation/tools/rtla/common_osnoise_description.rst b/Documentation/tools/rtla/common_osnoise_description.rst deleted file mode 100644 index d5d61615b96709..00000000000000 --- a/Documentation/tools/rtla/common_osnoise_description.rst +++ /dev/null @@ -1,8 +0,0 @@ -The **rtla osnoise** tool is an interface for the *osnoise* tracer. The -*osnoise* tracer dispatches a kernel thread per-cpu. These threads read the -time in a loop while with preemption, softirq and IRQs enabled, thus -allowing all the sources of operating system noise during its execution. -The *osnoise*'s tracer threads take note of the delta between each time -read, along with an interference counter of all sources of interference. -At the end of each period, the *osnoise* tracer displays a summary of -the results. diff --git a/Documentation/tools/rtla/common_osnoise_description.txt b/Documentation/tools/rtla/common_osnoise_description.txt new file mode 100644 index 00000000000000..d5d61615b96709 --- /dev/null +++ b/Documentation/tools/rtla/common_osnoise_description.txt @@ -0,0 +1,8 @@ +The **rtla osnoise** tool is an interface for the *osnoise* tracer. The +*osnoise* tracer dispatches a kernel thread per-cpu. These threads read the +time in a loop while with preemption, softirq and IRQs enabled, thus +allowing all the sources of operating system noise during its execution. +The *osnoise*'s tracer threads take note of the delta between each time +read, along with an interference counter of all sources of interference. +At the end of each period, the *osnoise* tracer displays a summary of +the results. diff --git a/Documentation/tools/rtla/common_osnoise_options.rst b/Documentation/tools/rtla/common_osnoise_options.rst deleted file mode 100644 index bd3c4f49919395..00000000000000 --- a/Documentation/tools/rtla/common_osnoise_options.rst +++ /dev/null @@ -1,39 +0,0 @@ -.. |threshold| replace:: **-a/--auto**, **-s/--stop**, or **-S/--stop-total** -.. |thresharg| replace:: -s -.. |tracer| replace:: osnoise - -.. |actionsperf| replace:: - Due to implementational limitations, actions might be delayed - up to one second after tracing is stopped. - -**-a**, **--auto** *us* - - Set the automatic trace mode. This mode sets some commonly used options - while debugging the system. It is equivalent to use **-s** *us* **-T 1 -t**. - -**-p**, **--period** *us* - - Set the *osnoise* tracer period in microseconds. - -**-r**, **--runtime** *us* - - Set the *osnoise* tracer runtime in microseconds. - -**-s**, **--stop** *us* - - Stop the trace if a single sample is higher than the argument in microseconds. - If **-T** is set, it will also save the trace to the output. - -**-S**, **--stop-total** *us* - - Stop the trace if the total sample is higher than the argument in microseconds. - If **-T** is set, it will also save the trace to the output. - -**-T**, **--threshold** *us* - - Specify the minimum delta between two time reads to be considered noise. - The default threshold is *5 us*. - -**-t**, **--trace** \[*file*] - - Save the stopped trace to [*file|osnoise_trace.txt*]. diff --git a/Documentation/tools/rtla/common_osnoise_options.txt b/Documentation/tools/rtla/common_osnoise_options.txt new file mode 100644 index 00000000000000..bd3c4f49919395 --- /dev/null +++ b/Documentation/tools/rtla/common_osnoise_options.txt @@ -0,0 +1,39 @@ +.. |threshold| replace:: **-a/--auto**, **-s/--stop**, or **-S/--stop-total** +.. |thresharg| replace:: -s +.. |tracer| replace:: osnoise + +.. |actionsperf| replace:: + Due to implementational limitations, actions might be delayed + up to one second after tracing is stopped. + +**-a**, **--auto** *us* + + Set the automatic trace mode. This mode sets some commonly used options + while debugging the system. It is equivalent to use **-s** *us* **-T 1 -t**. + +**-p**, **--period** *us* + + Set the *osnoise* tracer period in microseconds. + +**-r**, **--runtime** *us* + + Set the *osnoise* tracer runtime in microseconds. + +**-s**, **--stop** *us* + + Stop the trace if a single sample is higher than the argument in microseconds. + If **-T** is set, it will also save the trace to the output. + +**-S**, **--stop-total** *us* + + Stop the trace if the total sample is higher than the argument in microseconds. + If **-T** is set, it will also save the trace to the output. + +**-T**, **--threshold** *us* + + Specify the minimum delta between two time reads to be considered noise. + The default threshold is *5 us*. + +**-t**, **--trace** \[*file*] + + Save the stopped trace to [*file|osnoise_trace.txt*]. diff --git a/Documentation/tools/rtla/common_timerlat_aa.rst b/Documentation/tools/rtla/common_timerlat_aa.rst deleted file mode 100644 index 077029e6b289ee..00000000000000 --- a/Documentation/tools/rtla/common_timerlat_aa.rst +++ /dev/null @@ -1,7 +0,0 @@ -**--dump-tasks** - - prints the task running on all CPUs if stop conditions are met (depends on !--no-aa) - -**--no-aa** - - disable auto-analysis, reducing rtla timerlat cpu usage diff --git a/Documentation/tools/rtla/common_timerlat_aa.txt b/Documentation/tools/rtla/common_timerlat_aa.txt new file mode 100644 index 00000000000000..077029e6b289ee --- /dev/null +++ b/Documentation/tools/rtla/common_timerlat_aa.txt @@ -0,0 +1,7 @@ +**--dump-tasks** + + prints the task running on all CPUs if stop conditions are met (depends on !--no-aa) + +**--no-aa** + + disable auto-analysis, reducing rtla timerlat cpu usage diff --git a/Documentation/tools/rtla/common_timerlat_description.rst b/Documentation/tools/rtla/common_timerlat_description.rst deleted file mode 100644 index 49fcae3ffdec18..00000000000000 --- a/Documentation/tools/rtla/common_timerlat_description.rst +++ /dev/null @@ -1,18 +0,0 @@ -The **rtla timerlat** tool is an interface for the *timerlat* tracer. The -*timerlat* tracer dispatches a kernel thread per-cpu. These threads -set a periodic timer to wake themselves up and go back to sleep. After -the wakeup, they collect and generate useful information for the -debugging of operating system timer latency. - -The *timerlat* tracer outputs information in two ways. It periodically -prints the timer latency at the timer *IRQ* handler and the *Thread* -handler. It also enables the trace of the most relevant information via -**osnoise:** tracepoints. - -The **rtla timerlat** tool sets the options of the *timerlat* tracer -and collects and displays a summary of the results. By default, -the collection is done synchronously in kernel space using a dedicated -BPF program attached to the *timerlat* tracer. If either BPF or -the **osnoise:timerlat_sample** tracepoint it attaches to is -unavailable, the **rtla timerlat** tool falls back to using tracefs to -process the data asynchronously in user space. diff --git a/Documentation/tools/rtla/common_timerlat_description.txt b/Documentation/tools/rtla/common_timerlat_description.txt new file mode 100644 index 00000000000000..49fcae3ffdec18 --- /dev/null +++ b/Documentation/tools/rtla/common_timerlat_description.txt @@ -0,0 +1,18 @@ +The **rtla timerlat** tool is an interface for the *timerlat* tracer. The +*timerlat* tracer dispatches a kernel thread per-cpu. These threads +set a periodic timer to wake themselves up and go back to sleep. After +the wakeup, they collect and generate useful information for the +debugging of operating system timer latency. + +The *timerlat* tracer outputs information in two ways. It periodically +prints the timer latency at the timer *IRQ* handler and the *Thread* +handler. It also enables the trace of the most relevant information via +**osnoise:** tracepoints. + +The **rtla timerlat** tool sets the options of the *timerlat* tracer +and collects and displays a summary of the results. By default, +the collection is done synchronously in kernel space using a dedicated +BPF program attached to the *timerlat* tracer. If either BPF or +the **osnoise:timerlat_sample** tracepoint it attaches to is +unavailable, the **rtla timerlat** tool falls back to using tracefs to +process the data asynchronously in user space. diff --git a/Documentation/tools/rtla/common_timerlat_options.rst b/Documentation/tools/rtla/common_timerlat_options.rst deleted file mode 100644 index 1f5d024b53aa03..00000000000000 --- a/Documentation/tools/rtla/common_timerlat_options.rst +++ /dev/null @@ -1,67 +0,0 @@ -.. |threshold| replace:: **-a/--auto**, **-i/--irq**, or **-T/--thread** -.. |thresharg| replace:: -T -.. |tracer| replace:: timerlat - -.. |actionsperf| replace:: - For time-sensitive actions, it is recommended to run **rtla timerlat** with BPF - support and RT priority. Note that due to implementational limitations, actions - might be delayed up to one second after tracing is stopped if BPF mode is not - available or disabled. - -**-a**, **--auto** *us* - - Set the automatic trace mode. This mode sets some commonly used options - while debugging the system. It is equivalent to use **-T** *us* **-s** *us* - **-t**. By default, *timerlat* tracer uses FIFO:95 for *timerlat* threads, - thus equilavent to **-P** *f:95*. - -**-p**, **--period** *us* - - Set the *timerlat* tracer period in microseconds. - -**-i**, **--irq** *us* - - Stop trace if the *IRQ* latency is higher than the argument in us. - -**-T**, **--thread** *us* - - Stop trace if the *Thread* latency is higher than the argument in us. - -**-s**, **--stack** *us* - - Save the stack trace at the *IRQ* if a *Thread* latency is higher than the - argument in us. - -**-t**, **--trace** \[*file*] - - Save the stopped trace to [*file|timerlat_trace.txt*]. - -**--dma-latency** *us* - Set the /dev/cpu_dma_latency to *us*, aiming to bound exit from idle latencies. - *cyclictest* sets this value to *0* by default, use **--dma-latency** *0* to have - similar results. - -**--deepest-idle-state** *n* - Disable idle states higher than *n* for cpus that are running timerlat threads to - reduce exit from idle latencies. If *n* is -1, all idle states are disabled. - On exit from timerlat, the idle state setting is restored to its original state - before running timerlat. - - Requires rtla to be built with libcpupower. - -**-k**, **--kernel-threads** - - Use timerlat kernel-space threads, in contrast of **-u**. - -**-u**, **--user-threads** - - Set timerlat to run without a workload, and then dispatches user-space workloads - to wait on the timerlat_fd. Once the workload is awakes, it goes to sleep again - adding so the measurement for the kernel-to-user and user-to-kernel to the tracer - output. **--user-threads** will be used unless the user specify **-k**. - -**-U**, **--user-load** - - Set timerlat to run without workload, waiting for the user to dispatch a per-cpu - task that waits for a new period on the tracing/osnoise/per_cpu/cpu$ID/timerlat_fd. - See linux/tools/rtla/sample/timerlat_load.py for an example of user-load code. diff --git a/Documentation/tools/rtla/common_timerlat_options.txt b/Documentation/tools/rtla/common_timerlat_options.txt new file mode 100644 index 00000000000000..33070b264caeb9 --- /dev/null +++ b/Documentation/tools/rtla/common_timerlat_options.txt @@ -0,0 +1,67 @@ +.. |threshold| replace:: **-a/--auto**, **-i/--irq**, or **-T/--thread** +.. |thresharg| replace:: -T +.. |tracer| replace:: timerlat + +.. |actionsperf| replace:: + For time-sensitive actions, it is recommended to run **rtla timerlat** with BPF + support and RT priority. Note that due to implementational limitations, actions + might be delayed up to one second after tracing is stopped if BPF mode is not + available or disabled. + +**-a**, **--auto** *us* + + Set the automatic trace mode. This mode sets some commonly used options + while debugging the system. It is equivalent to use **-T** *us* **-s** *us* + **-t**. By default, *timerlat* tracer uses FIFO:95 for *timerlat* threads, + thus equivalent to **-P** *f:95*. + +**-p**, **--period** *us* + + Set the *timerlat* tracer period in microseconds. + +**-i**, **--irq** *us* + + Stop trace if the *IRQ* latency is higher than the argument in us. + +**-T**, **--thread** *us* + + Stop trace if the *Thread* latency is higher than the argument in us. + +**-s**, **--stack** *us* + + Save the stack trace at the *IRQ* if a *Thread* latency is higher than the + argument in us. + +**-t**, **--trace** \[*file*] + + Save the stopped trace to [*file|timerlat_trace.txt*]. + +**--dma-latency** *us* + Set the /dev/cpu_dma_latency to *us*, aiming to bound exit from idle latencies. + *cyclictest* sets this value to *0* by default, use **--dma-latency** *0* to have + similar results. + +**--deepest-idle-state** *n* + Disable idle states higher than *n* for cpus that are running timerlat threads to + reduce exit from idle latencies. If *n* is -1, all idle states are disabled. + On exit from timerlat, the idle state setting is restored to its original state + before running timerlat. + + Requires rtla to be built with libcpupower. + +**-k**, **--kernel-threads** + + Use timerlat kernel-space threads, in contrast of **-u**. + +**-u**, **--user-threads** + + Set timerlat to run without a workload, and then dispatches user-space workloads + to wait on the timerlat_fd. Once the workload is awakened, it goes to sleep again + adding so the measurement for the kernel-to-user and user-to-kernel to the tracer + output. **--user-threads** will be used unless the user specify **-k**. + +**-U**, **--user-load** + + Set timerlat to run without workload, waiting for the user to dispatch a per-cpu + task that waits for a new period on the tracing/osnoise/per_cpu/cpu$ID/timerlat_fd. + See linux/tools/rtla/sample/timerlat_load.py for an example of user-load code. diff --git a/Documentation/tools/rtla/common_top_options.rst b/Documentation/tools/rtla/common_top_options.rst deleted file mode 100644 index f48878938f842c..00000000000000 --- a/Documentation/tools/rtla/common_top_options.rst +++ /dev/null @@ -1,3 +0,0 @@ -**-q**, **--quiet** - - Print only a summary at the end of the session. diff --git a/Documentation/tools/rtla/common_top_options.txt b/Documentation/tools/rtla/common_top_options.txt new file mode 100644 index 00000000000000..f48878938f842c --- /dev/null +++ b/Documentation/tools/rtla/common_top_options.txt @@ -0,0 +1,3 @@ +**-q**, **--quiet** + + Print only a summary at the end of the session. diff --git a/Documentation/tools/rtla/rtla-hwnoise.rst b/Documentation/tools/rtla/rtla-hwnoise.rst index 3a7163c02ac8e8..26512b15fe7ba5 100644 --- a/Documentation/tools/rtla/rtla-hwnoise.rst +++ b/Documentation/tools/rtla/rtla-hwnoise.rst @@ -29,11 +29,11 @@ collection of the tracer output. OPTIONS ======= -.. include:: common_osnoise_options.rst +.. include:: common_osnoise_options.txt -.. include:: common_top_options.rst +.. include:: common_top_options.txt -.. include:: common_options.rst +.. include:: common_options.txt EXAMPLE ======= @@ -106,4 +106,4 @@ AUTHOR ====== Written by Daniel Bristot de Oliveira -.. include:: common_appendix.rst +.. include:: common_appendix.txt diff --git a/Documentation/tools/rtla/rtla-osnoise-hist.rst b/Documentation/tools/rtla/rtla-osnoise-hist.rst index 1fc60ef2610677..007521c865d97e 100644 --- a/Documentation/tools/rtla/rtla-osnoise-hist.rst +++ b/Documentation/tools/rtla/rtla-osnoise-hist.rst @@ -15,7 +15,7 @@ SYNOPSIS DESCRIPTION =========== -.. include:: common_osnoise_description.rst +.. include:: common_osnoise_description.txt The **rtla osnoise hist** tool collects all **osnoise:sample_threshold** occurrence in a histogram, displaying the results in a user-friendly way. @@ -24,11 +24,11 @@ collection of the tracer output. OPTIONS ======= -.. include:: common_osnoise_options.rst +.. include:: common_osnoise_options.txt -.. include:: common_hist_options.rst +.. include:: common_hist_options.txt -.. include:: common_options.rst +.. include:: common_options.txt EXAMPLE ======= @@ -65,4 +65,4 @@ AUTHOR ====== Written by Daniel Bristot de Oliveira -.. include:: common_appendix.rst +.. include:: common_appendix.txt diff --git a/Documentation/tools/rtla/rtla-osnoise-top.rst b/Documentation/tools/rtla/rtla-osnoise-top.rst index b1cbd7bcd4aed2..6ccadae3894570 100644 --- a/Documentation/tools/rtla/rtla-osnoise-top.rst +++ b/Documentation/tools/rtla/rtla-osnoise-top.rst @@ -15,7 +15,7 @@ SYNOPSIS DESCRIPTION =========== -.. include:: common_osnoise_description.rst +.. include:: common_osnoise_description.txt **rtla osnoise top** collects the periodic summary from the *osnoise* tracer, including the counters of the occurrence of the interference source, @@ -26,11 +26,11 @@ collection of the tracer output. OPTIONS ======= -.. include:: common_osnoise_options.rst +.. include:: common_osnoise_options.txt -.. include:: common_top_options.rst +.. include:: common_top_options.txt -.. include:: common_options.rst +.. include:: common_options.txt EXAMPLE ======= @@ -60,4 +60,4 @@ AUTHOR ====== Written by Daniel Bristot de Oliveira -.. include:: common_appendix.rst +.. include:: common_appendix.txt diff --git a/Documentation/tools/rtla/rtla-osnoise.rst b/Documentation/tools/rtla/rtla-osnoise.rst index c129b206ce3484..540d2bf6c15247 100644 --- a/Documentation/tools/rtla/rtla-osnoise.rst +++ b/Documentation/tools/rtla/rtla-osnoise.rst @@ -14,7 +14,7 @@ SYNOPSIS DESCRIPTION =========== -.. include:: common_osnoise_description.rst +.. include:: common_osnoise_description.txt The *osnoise* tracer outputs information in two ways. It periodically prints a summary of the noise of the operating system, including the counters of @@ -56,4 +56,4 @@ AUTHOR ====== Written by Daniel Bristot de Oliveira -.. include:: common_appendix.rst +.. include:: common_appendix.txt diff --git a/Documentation/tools/rtla/rtla-timerlat-hist.rst b/Documentation/tools/rtla/rtla-timerlat-hist.rst index 4923a362129bbd..f56fe546411bd4 100644 --- a/Documentation/tools/rtla/rtla-timerlat-hist.rst +++ b/Documentation/tools/rtla/rtla-timerlat-hist.rst @@ -16,7 +16,7 @@ SYNOPSIS DESCRIPTION =========== -.. include:: common_timerlat_description.rst +.. include:: common_timerlat_description.txt The **rtla timerlat hist** displays a histogram of each tracer event occurrence. This tool uses the periodic information, and the @@ -25,13 +25,13 @@ occurrence. This tool uses the periodic information, and the OPTIONS ======= -.. include:: common_timerlat_options.rst +.. include:: common_timerlat_options.txt -.. include:: common_hist_options.rst +.. include:: common_hist_options.txt -.. include:: common_options.rst +.. include:: common_options.txt -.. include:: common_timerlat_aa.rst +.. include:: common_timerlat_aa.txt EXAMPLE ======= @@ -110,4 +110,4 @@ AUTHOR ====== Written by Daniel Bristot de Oliveira -.. include:: common_appendix.rst +.. include:: common_appendix.txt diff --git a/Documentation/tools/rtla/rtla-timerlat-top.rst b/Documentation/tools/rtla/rtla-timerlat-top.rst index 50968cdd2095a1..72d85e36c19388 100644 --- a/Documentation/tools/rtla/rtla-timerlat-top.rst +++ b/Documentation/tools/rtla/rtla-timerlat-top.rst @@ -16,23 +16,23 @@ SYNOPSIS DESCRIPTION =========== -.. include:: common_timerlat_description.rst +.. include:: common_timerlat_description.txt The **rtla timerlat top** displays a summary of the periodic output from the *timerlat* tracer. It also provides information for each operating system noise via the **osnoise:** tracepoints that can be -seem with the option **-T**. +seen with the option **-T**. OPTIONS ======= -.. include:: common_timerlat_options.rst +.. include:: common_timerlat_options.txt -.. include:: common_top_options.rst +.. include:: common_top_options.txt -.. include:: common_options.rst +.. include:: common_options.txt -.. include:: common_timerlat_aa.rst +.. include:: common_timerlat_aa.txt **--aa-only** *us* @@ -133,4 +133,4 @@ AUTHOR ------ Written by Daniel Bristot de Oliveira -.. include:: common_appendix.rst +.. include:: common_appendix.txt diff --git a/Documentation/tools/rtla/rtla-timerlat.rst b/Documentation/tools/rtla/rtla-timerlat.rst index 20e2d259467fd0..ce9f57e038c37f 100644 --- a/Documentation/tools/rtla/rtla-timerlat.rst +++ b/Documentation/tools/rtla/rtla-timerlat.rst @@ -14,7 +14,7 @@ SYNOPSIS DESCRIPTION =========== -.. include:: common_timerlat_description.rst +.. include:: common_timerlat_description.txt The **rtla timerlat top** mode displays a summary of the periodic output from the *timerlat* tracer. The **rtla timerlat hist** mode displays @@ -51,4 +51,4 @@ AUTHOR ====== Written by Daniel Bristot de Oliveira -.. include:: common_appendix.rst +.. include:: common_appendix.txt diff --git a/Documentation/tools/rtla/rtla.rst b/Documentation/tools/rtla/rtla.rst index fc0d233efcd5df..2a5fb7004ad448 100644 --- a/Documentation/tools/rtla/rtla.rst +++ b/Documentation/tools/rtla/rtla.rst @@ -45,4 +45,4 @@ AUTHOR ====== Daniel Bristot de Oliveira -.. include:: common_appendix.rst +.. include:: common_appendix.txt diff --git a/Documentation/trace/ftrace.rst b/Documentation/trace/ftrace.rst index aef674df3afdbf..d1f313a5f4ad68 100644 --- a/Documentation/trace/ftrace.rst +++ b/Documentation/trace/ftrace.rst @@ -366,6 +366,14 @@ of ftrace. Here is a list of some of the key files: for each function. The displayed address is the patch-site address and can differ from /proc/kallsyms address. + syscall_user_buf_size: + + Some system call trace events will record the data from a user + space address that one of the parameters point to. The amount of + data per event is limited. This file holds the max number of bytes + that will be recorded into the ring buffer to hold this data. + The max value is currently 165. + dyn_ftrace_total_info: This file is for debugging purposes. The number of functions that diff --git a/Documentation/trace/timerlat-tracer.rst b/Documentation/trace/timerlat-tracer.rst index 53a56823e903d0..68d429d454a54d 100644 --- a/Documentation/trace/timerlat-tracer.rst +++ b/Documentation/trace/timerlat-tracer.rst @@ -43,12 +43,12 @@ It is possible to follow the trace by reading the trace file:: <...>-868 [001] .... 54.030347: #2 context thread timer_latency 4351 ns -The tracer creates a per-cpu kernel thread with real-time priority that -prints two lines at every activation. The first is the *timer latency* -observed at the *hardirq* context before the activation of the thread. -The second is the *timer latency* observed by the thread. The ACTIVATION -ID field serves to relate the *irq* execution to its respective *thread* -execution. +The tracer creates a per-cpu kernel thread with real-time priority +SCHED_FIFO:95 that prints two lines at every activation. The first is +the *timer latency* observed at the *hardirq* context before the activation +of the thread. The second is the *timer latency* observed by the thread. +The ACTIVATION ID field serves to relate the *irq* execution to its +respective *thread* execution. The *irq*/*thread* splitting is important to clarify in which context the unexpected high value is coming from. The *irq* context can be diff --git a/Documentation/translations/it_IT/doc-guide/parse-headers.rst b/Documentation/translations/it_IT/doc-guide/parse-headers.rst index 026a23e497674c..b0caa40fe1e99c 100644 --- a/Documentation/translations/it_IT/doc-guide/parse-headers.rst +++ b/Documentation/translations/it_IT/doc-guide/parse-headers.rst @@ -13,28 +13,28 @@ dello spazio utente ha ulteriori vantaggi: Sphinx genererà dei messaggi d'avviso se un simbolo non viene trovato nella documentazione. Questo permette di mantenere allineate la documentazione della uAPI (API spazio utente) con le modifiche del kernel. -Il programma :ref:`parse_headers.pl ` genera questi riferimenti. +Il programma :ref:`parse_headers.py ` genera questi riferimenti. Esso dev'essere invocato attraverso un Makefile, mentre si genera la documentazione. Per avere un esempio su come utilizzarlo all'interno del kernel consultate ``Documentation/userspace-api/media/Makefile``. .. _it_parse_headers: -parse_headers.pl +parse_headers.py ^^^^^^^^^^^^^^^^ NOME **** -parse_headers.pl - analizza i file C al fine di identificare funzioni, +parse_headers.py - analizza i file C al fine di identificare funzioni, strutture, enumerati e definizioni, e creare riferimenti per Sphinx SINTASSI ******** -\ **parse_headers.pl**\ [] [] +\ **parse_headers.py**\ [] [] Dove può essere: --debug, --usage o --help. diff --git a/Documentation/translations/it_IT/doc-guide/sphinx.rst b/Documentation/translations/it_IT/doc-guide/sphinx.rst index 1f513bc336187c..a5c5d935febf3c 100644 --- a/Documentation/translations/it_IT/doc-guide/sphinx.rst +++ b/Documentation/translations/it_IT/doc-guide/sphinx.rst @@ -109,7 +109,7 @@ Sphinx. Se lo script riesce a riconoscere la vostra distribuzione, allora sarà in grado di darvi dei suggerimenti su come procedere per completare l'installazione:: - $ ./scripts/sphinx-pre-install + $ ./tools/docs/sphinx-pre-install Checking if the needed tools for Fedora release 26 (Twenty Six) are available Warning: better to also install "texlive-luatex85". You should run: @@ -119,7 +119,7 @@ l'installazione:: . sphinx_2.4.4/bin/activate pip install -r Documentation/sphinx/requirements.txt - Can't build as 1 mandatory dependency is missing at ./scripts/sphinx-pre-install line 468. + Can't build as 1 mandatory dependency is missing at ./tools/docs/sphinx-pre-install line 468. L'impostazione predefinita prevede il controllo dei requisiti per la generazione di documenti html e PDF, includendo anche il supporto per le immagini, le diff --git a/Documentation/translations/ja_JP/SubmittingPatches b/Documentation/translations/ja_JP/SubmittingPatches index 5334db47174476..b950347b5993c4 100644 --- a/Documentation/translations/ja_JP/SubmittingPatches +++ b/Documentation/translations/ja_JP/SubmittingPatches @@ -132,6 +132,25 @@ http://savannah.nongnu.org/projects/quilt platform_set_drvdata(), but left the variable "dev" unused, delete it. +特定のコミットで導入された不具合を修正する場合（例えば ``git bisect`` で原因となった +コミットを特定したときなど）は、コミットの SHA-1 の先頭12文字と1行の要約を添えた +「Fixes:」タグを付けてください。この行は75文字を超えても構いませんが、途中で +改行せず、必ず1行で記述してください。 +例: + Fixes: 54a4f0239f2e ("KVM: MMU: make kvm_mmu_zap_page() return the number of pages it actually freed") + +以下の git の設定を使うと、git log や git show で上記形式を出力するための +専用の出力形式を追加できます:: + + [core] + abbrev = 12 + [pretty] + fixes = Fixes: %h (\"%s\") + +使用例:: + + $ git log -1 --pretty=fixes 54a4f0239f2e + Fixes: 54a4f0239f2e ("KVM: MMU: make kvm_mmu_zap_page() return the number of pages it actually freed") 3) パッチの分割 @@ -409,7 +428,7 @@ Acked-by: が必ずしもパッチ全体の承認を示しているわけでは このタグはパッチに関心があると思われる人達がそのパッチの議論に含まれていたこと を明文化します。 -14) Reported-by:, Tested-by:, Reviewed-by: および Suggested-by: の利用 +14) Reported-by:, Tested-by:, Reviewed-by:, Suggested-by: および Fixes: の利用 他の誰かによって報告された問題を修正するパッチであれば、問題報告者という寄与を クレジットするために、Reported-by: タグを追加することを検討してください。 @@ -465,6 +484,13 @@ Suggested-by: タグは、パッチのアイデアがその人からの提案に クレジットしていけば、望むらくはその人たちが将来別の機会に再度力を貸す気に なってくれるかもしれません。 +Fixes: タグは、そのパッチが以前のコミットにあった問題を修正することを示します。 +これは、バグがどこで発生したかを特定しやすくし、バグ修正のレビューに役立ちます。 +また、このタグはstableカーネルチームが、あなたの修正をどのstableカーネル +バージョンに適用すべきか判断する手助けにもなります。パッチによって修正された +バグを示すには、この方法が推奨されます。前述の、「2) パッチに対する説明」の +セクションを参照してください。 + 15) 標準的なパッチのフォーマット 標準的なパッチのサブジェクトは以下のとおりです。 diff --git a/Documentation/translations/zh_CN/admin-guide/README.rst b/Documentation/translations/zh_CN/admin-guide/README.rst index 82e628b77efdea..7c2ffe7e87c7e6 100644 --- a/Documentation/translations/zh_CN/admin-guide/README.rst +++ b/Documentation/translations/zh_CN/admin-guide/README.rst @@ -288,4 +288,4 @@ Documentation/translations/zh_CN/admin-guide/bug-hunting.rst 。 更多用GDB调试内核的信息，请参阅： Documentation/translations/zh_CN/dev-tools/gdb-kernel-debugging.rst -和 Documentation/dev-tools/kgdb.rst 。 +和 Documentation/process/debugging/kgdb.rst 。 diff --git a/Documentation/translations/zh_CN/block/blk-mq.rst b/Documentation/translations/zh_CN/block/blk-mq.rst new file mode 100644 index 00000000000000..ccc08f76ff971e --- /dev/null +++ b/Documentation/translations/zh_CN/block/blk-mq.rst @@ -0,0 +1,130 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/block/blk-mq.rst + +:翻译: + + 柯子杰 kezijie + +:校译: + + + +================================================ +多队列块设备 I/O 排队机制 (blk-mq) +================================================ + +多队列块设备 I/O 排队机制提供了一组 API，使高速存储设备能够同时在多个队列中 +处理并发的 I/O 请求并将其提交到块设备，从而实现极高的每秒输入/输出操作次数 +(IOPS)，充分发挥现代存储设备的并行能力。 + +介绍 +==== + +背景 +---- + +磁盘从 Linux 内核开发初期就已成为事实上的标准。块 I/O 子系统的目标是尽可能 +为此类设备提供最佳性能，因为它们在进行随机访问时代价极高，性能瓶颈主要在机械 +运动部件上，其速度远低于存储栈中其他任何层。其中一个软件优化例子是根据硬盘磁 +头当前的位置重新排序读/写请求。 + +然而，随着固态硬盘和非易失性存储的发展，它们没有机械部件，也不存在随机访问代 +码，并能够进行高速并行访问，存储栈的瓶颈从存储设备转移到了操作系统。为了充分 +利用这些设备设计中的并行性，引入了多队列机制。 + +原来的设计只有一个队列来存储块设备 I/O 请求，并且只使用一个锁。由于缓存中的 +脏数据和多处理器共享单锁的瓶颈，这种设计在 SMP 系统中扩展性不佳。当不同进程 +（或同一进程在不同 CPU 上）同时执行块设备 I/O 时，该单队列模型还会出现严重 +的拥塞问题。为了解决这些问题，blk-mq API 引入了多个队列，每个队列在本地 CPU +上拥有独立的入口点，从而消除了对全局锁的需求。关于其具体工作机制的更深入说明， +请参见下一节（ `工作原理`_ ）。 + +工作原理 +-------- + +当用户空间执行对块设备的 I/O（例如读写文件）时，blk-mq 便会介入：它将存储和 +管理发送到块设备的 I/O 请求，充当用户空间（文件系统，如果存在的话）与块设备驱 +动之间的中间层。 + +blk-mq 由两组队列组成：软件暂存队列和硬件派发队列。当请求到达块层时，它会尝 +试最短路径：直接发送到硬件队列。然而，有两种情况下可能不会这样做：如果该层有 +IO 调度器或者是希望合并请求。在这两种情况下，请求将被发送到软件队列。 + +随后，在软件队列中的请求被处理后，请求会被放置到硬件队列。硬件队列是第二阶段 +的队列，硬件可以直接访问并处理这些请求。然而，如果硬件没有足够的资源来接受更 +多请求，blk-mq 会将请求放置在临时队列中，待硬件资源充足时再发送。 + +软件暂存队列 +~~~~~~~~~~~~ + +在这些请求未直接发送到驱动时，块设备 I/O 子系统会将请求添加到软件暂存队列中 +（由 struct blk_mq_ctx 表示）。一个请求可能包含一个或多个 BIO。它们通过 struct bio +数据结构到达块层。块层随后会基于这些 BIO 构建新的结构体 struct request，用于 +与设备驱动通信。每个队列都有自己的锁，队列数量由每个 CPU 和每个 node 为基础 +来决定。 + +暂存队列可用于合并相邻扇区的请求。例如，对扇区3-6、6-7、7-9的请求可以合并 +为对扇区3-9的一个请求。即便 SSD 或 NVM 的随机访问和顺序访问响应时间相同， +合并顺序访问的请求仍可减少单独请求的数量。这种合并请求的技术称为 plugging。 + +此外，I/O 调度器还可以对请求进行重新排序以确保系统资源的公平性（例如防止某 +个应用出现“饥饿”现象）或是提高 I/O 性能。 + +I/O 调度器 +^^^^^^^^^^ + +块层实现了多种调度器，每种调度器都遵循一定启发式规则以提高 I/O 性能。它们是 +“可插拔”的(plug and play)，可在运行时通过 sysfs 选择。你可以在这里阅读更 +多关于 Linux IO 调度器知识 `here +`_。调度只发 +生在同一队列内的请求之间，因此无法合并不同队列的请求，否则会造成缓存冲突并需 +要为每个队列加锁。调度后，请求即可发送到硬件。可能选择的调度器之一是 NONE 调 +度器，这是最直接的调度器：它只将请求放到进程所在的软件队列，不进行重新排序。 +当设备开始处理硬件队列中的请求时（运行硬件队列），映射到该硬件队列的软件队列 +会按映射顺序依次清空。 + +硬件派发队列 +~~~~~~~~~~~~~ + +硬件队列（由 struct blk_mq_hw_ctx 表示）是设备驱动用来映射设备提交队列 +（或设备 DMA 环缓存）的结构体，它是块层提交路径在底层设备驱动接管请求之前的 +最后一个阶段。运行此队列时，块层会从相关软件队列中取出请求，并尝试派发到硬件。 + +如果请求无法直接发送到硬件，它们会被加入到请求的链表(``hctx->dispatch``) 中。 +随后，当块层下次运行该队列时，会优先发送位于 ``dispatch`` 链表中的请求， +以确保那些最早准备好发送的请求能够得到公平调度。硬件队列的数量取决于硬件及 +其设备驱动所支持的硬件上下文数，但不会超过系统的CPU核心数。在这个阶段不 +会发生重新排序，每个软件队列都有一组硬件队列来用于提交请求。 + +.. note:: + + 块层和设备协议都不保证请求完成顺序。此问题需由更高层处理，例如文件系统。 + +基于标识的完成机制 +~~~~~~~~~~~~~~~~~~~ + +为了指示哪一个请求已经完成，每个请求都会被分配一个整数标识，该标识的取值范围 +是从0到分发队列的大小。这个标识由块层生成，并在之后由设备驱动使用，从而避 +免了为每个请求再单独创建冗余的标识符。当请求在驱动中完成时，驱动会将该标识返 +回给块层，以通知该请求已完成。这样，块层就无需再进行线性搜索来确定是哪一个 +I/O 请求完成了。 + +更多阅读 +-------- + +- `Linux 块 I/O：多队列 SSD 并发访问简介 `_ + +- `NOOP 调度器 `_ + +- `Null 块设备驱动程序 `_ + +源代码 +====== + +该API在以下内核代码中: + +include/linux/blk-mq.h + +block/blk-mq.c \ No newline at end of file diff --git a/Documentation/translations/zh_CN/block/data-integrity.rst b/Documentation/translations/zh_CN/block/data-integrity.rst new file mode 100644 index 00000000000000..b31aa9ef895432 --- /dev/null +++ b/Documentation/translations/zh_CN/block/data-integrity.rst @@ -0,0 +1,192 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/block/data-integrity.rst + +:翻译: + + 柯子杰 kezijie + +:校译: + +========== +数据完整性 +========== + +1. 引言 +======= + +现代文件系统对数据和元数据都进行了校验和保护以防止数据损坏。然而，这种损坏的 +检测是在读取时才进行，这可能发生在数据写入数月之后。到那时，应用程序尝试写入 +的原始数据很可能已经丢失。 + +解决方案是确保磁盘实际存储的内容就是应用程序想存储的。SCSI 协议族（如 SBC +数据完整性字段、SCC 保护提案）以及 SATA/T13（外部路径保护）最近新增的功能， +通过在 I/O 中附加完整性元数据的方式，试图解决这一问题。完整性元数据（在 +SCSI 术语中称为保护信息）包括每个扇区的校验和，以及一个递增计数器，用于确保 +各扇区按正确顺序被写入盘。在某些保护方案中，还能保证 I/O 写入磁盘的正确位置。 + +当前的存储控制器和设备实现了多种保护措施，例如校验和和数据清理。但这些技术通 +常只在各自的独立域内工作，或最多仅在 I/O 路径的相邻节点之间发挥作用。DIF 及 +其它数据完整性拓展有意思的点在于保护格式定义明确，I/O 路径上的每个节点都可以 +验证 I/O 的完整性，如检测到损坏可直接拒绝。这不仅可以防止数据损坏，还能够隔 +离故障点。 + +2. 数据完整性拓展 +================= + +如上所述，这些协议扩展只保护控制器与存储设备之间的路径。然而，许多控制器实际 +上允许操作系统与完整性元数据(IMD)交互。我们一直与多家 FC/SAS HBA 厂商合作， +使保护信息能够在其控制器与操作系统之间传输。 + +SCSI 数据完整性字段通过在每个扇区后附加8字节的保护信息来实现。数据 + 完整 +性元数据存储在磁盘的520字节扇区中。数据 + IMD 在控制器与目标设备之间传输 +时是交错组合在一起的。T13 提案的方式类似。 + +由于操作系统处理520字节（甚至 4104 字节）扇区非常不便，我们联系了多家 HBA +厂商，并鼓励它们分离数据与完整性元数据的 scatter-gather lists。 + +控制器在写入时会将数据缓冲区和完整性元数据缓冲区的数据交错在一起，并在读取时 +会拆分它们。这样，Linux 就能直接通过 DMA 将数据缓冲区传输到主机内存或从主机 +内存读取，而无需修改页缓存。 + +此外，SCSI 与 SATA 规范要求的16位 CRC 校验在软件中计算代价较高。基准测试发 +现，计算此校验在高负载情形下显著影响系统性能。一些控制器允许在操作系统接口处 +使用轻量级校验。例如 Emulex 支持 TCP/IP 校验。操作系统提供的 IP 校验在写入 +时会转换为16位 CRC，读取时则相反。这允许 Linux 或应用程序以极低的开销生成 +完整性元数据（与软件 RAID5 相当）。 + +IP 校验在检测位错误方面比 CRC 弱，但关键在于数据缓冲区与完整性元数据缓冲区 +的分离。只有这两个不同的缓冲区匹配，I/O 才能完成。 + +数据与完整性元数据缓冲区的分离以及校验选择被称为数据完整性扩展。由于这些扩展 +超出了协议主体(T10、T13)的范围，Oracle 及其合作伙伴正尝试在存储网络行业协 +会内对其进行标准化。 + +3. 内核变更 +=========== + +Linux 中的数据完整性框架允许将保护信息固定到 I/O 上，并在支持该功能的控制器 +之间发送和接收。 + +SCSI 和 SATA 中完整性扩展的优势在于，它们能够保护从应用程序到存储设备的整个 +路径。然而，这同时也是最大的劣势。这意味着保护信息必须采用磁盘可以理解的格式。 + +通常，Linux/POSIX 应用程序并不关心所访问存储设备的具体细节。虚拟文件系统层 +和块层会让硬件扇区大小和传输协议对应用程序完全透明。 + +然而，在准备发送到磁盘的保护信息时，就需要这种细节。因此，端到端保护方案的概 +念实际上违反了层次结构。应用程序完全不应该知道它访问的是 SCSI 还是 SATA 磁盘。 + +Linux 中实现的数据完整性支持尝试将这些细节对应用程序隐藏。就应用程序（以及在 +某种程度上内核）而言，完整性元数据是附加在 I/O 上的不透明信息。 + +当前实现允许块层自动为任何 I/O 生成保护信息。最终目标是将用户数据的完整性元 +数据计算移至用户空间。内核中产生的元数据和其他 I/O 仍将使用自动生成接口。 + +一些存储设备允许为每个硬件扇区附加一个16位的标识值。这个标识空间的所有者是 +块设备的所有者，也就是在多数情况下由文件系统掌控。文件系统可以利用这额外空间 +按需为扇区附加标识。由于标识空间有限，块接口允许通过交错方式对更大的数据块标 +识。这样，8*16位的信息可以附加到典型的 4KB 文件系统块上。 + +这也意味着诸如 fsck 和 mkfs 等应用程序需要能够从用户空间访问并操作这些标记。 +为此，正在开发一个透传接口。 + +4. 块层实现细节 +=============== + +4.1 Bio +-------- + +当启用 CONFIG_BLK_DEV_INTEGRITY 时，数据完整性补丁会在 struct bio 中添加 +一个新字段。调用 bio_integrity(bio) 会返回一个指向 struct bip 的指针，该 +结构体包含了该 bio 的完整性负载。本质上，bip 是一个精简版的 struct bio，其 +中包含一个 bio_vec，用于保存完整性元数据以及所需的维护信息（bvec 池、向量计 +数等）。 + +内核子系统可以通过调用 bio_integrity_alloc(bio) 来为某个 bio 启用数据完整 +性保护。该函数会分配并附加一个 bip 到该 bio 上。 + +随后使用 bio_integrity_add_page() 将包含完整性元数据的单独页面附加到该 bio。 + +调用 bio_free() 会自动释放bip。 + +4.2 块设备 +----------- + +块设备可以在 queue_limits 结构中的 integrity 子结构中设置完整性信息。 + +对于分层块设备，需要选择一个适用于所有子设备的完整性配置文件。可以使用 +queue_limits_stack_integrity() 来协助完成该操作。目前，DM 和 MD linear、 +RAID0 和 RAID1 已受支持。而RAID4/5/6因涉及应用标签仍需额外的开发工作。 + +5.0 块层完整性API +================== + +5.1 普通文件系统 +----------------- + + 普通文件系统并不知道其下层块设备具备发送或接收完整性元数据的能力。 + 在执行写操作时，块层会在调用 submit_bio() 时自动生成完整性元数据。 + 在执行读操作时，I/O 完成后会触发完整性验证。 + + IMD 的生成与验证行为可以通过以下开关控制:: + + /sys/block//integrity/write_generate + + and:: + + /sys/block//integrity/read_verify + + flags. + +5.2 具备完整性感知的文件系统 +---------------------------- + + 具备完整性感知能力的文件系统可以在准备 I/O 时附加完整性元数据， + 并且如果底层块设备支持应用标签空间，也可以加以利用。 + + + `bool bio_integrity_prep(bio);` + + 要为写操作生成完整性元数据或为读操作设置缓冲区，文件系统必须调用 + bio_integrity_prep(bio)。 + + 在调用此函数之前，必须先设置好 bio 的数据方向和起始扇区，并确 + 保该 bio 已经添加完所有的数据页。调用者需要自行保证，在 I/O 进行 + 期间 bio 不会被修改。如果由于某种原因准备失败，则应当以错误状态 + 完成该 bio。 + +5.3 传递已有的完整性元数据 +-------------------------- + + 能够自行生成完整性元数据或可以从用户空间传输完整性元数据的文件系统， + 可以使用如下接口： + + + `struct bip * bio_integrity_alloc(bio, gfp_mask, nr_pages);` + + 为 bio 分配完整性负载并挂载到 bio 上。nr_pages 表示需要在 + integrity bio_vec list 中存储多少页保护数据（类似 bio_alloc）。 + + 完整性负载将在 bio_free() 被调用时释放。 + + + `int bio_integrity_add_page(bio, page, len, offset);` + + 将包含完整性元数据的一页附加到已有的 bio 上。该 bio 必须已有 bip， + 即必须先调用 bio_integrity_alloc()。对于写操作，页中的完整 + 性元数据必须采用目标设备可识别的格式，但有一个例外，当请求在 I/O 栈 + 中传递时，扇区号会被重新映射。这意味着通过此接口添加的页在 I/O 过程 + 中可能会被修改！完整性元数据中的第一个引用标签必须等于 bip->bip_sector。 + + 只要 bip bio_vec array（nr_pages）有空间，就可以继续通过 + bio_integrity_add_page()添加页。 + + 当读操作完成后，附加的页将包含从存储设备接收到的完整性元数据。 + 接收方需要处理这些元数据，并在操作完成时验证数据完整性 + + +---------------------------------------------------------------------- + +2007-12-24 Martin K. Petersen \ No newline at end of file diff --git a/Documentation/translations/zh_CN/block/index.rst b/Documentation/translations/zh_CN/block/index.rst new file mode 100644 index 00000000000000..f2ae5096ed684c --- /dev/null +++ b/Documentation/translations/zh_CN/block/index.rst @@ -0,0 +1,35 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/block/index.rst + +:翻译: + + 柯子杰 ke zijie + +:校译: + +===== +Block +===== + +.. toctree:: + :maxdepth: 1 + + blk-mq + data-integrity + +TODOList: +* bfq-iosched +* biovecs +* cmdline-partition +* deadline-iosched +* inline-encryption +* ioprio +* kyber-iosched +* null_blk +* pr +* stat +* switching-sched +* writeback_cache_control +* ublk diff --git a/Documentation/translations/zh_CN/core-api/cpu_hotplug.rst b/Documentation/translations/zh_CN/core-api/cpu_hotplug.rst index bc0d7ea6d834cc..3447fbf0e6954c 100644 --- a/Documentation/translations/zh_CN/core-api/cpu_hotplug.rst +++ b/Documentation/translations/zh_CN/core-api/cpu_hotplug.rst @@ -22,7 +22,7 @@ Srivatsa Vaddagiri , Ashok Raj , Joel Schopp , - Thomas Gleixner + Thomas Gleixner 简介 ==== diff --git a/Documentation/translations/zh_CN/core-api/genericirq.rst b/Documentation/translations/zh_CN/core-api/genericirq.rst index 05ccb954c18d0d..d2c1bd94bb9709 100644 --- a/Documentation/translations/zh_CN/core-api/genericirq.rst +++ b/Documentation/translations/zh_CN/core-api/genericirq.rst @@ -404,6 +404,6 @@ kernel/irq/chip.c 感谢以下人士对本文档作出的贡献： -1. Thomas Gleixner tglx@linutronix.de +1. Thomas Gleixner tglx@kernel.org 2. Ingo Molnar mingo@elte.hu diff --git a/Documentation/translations/zh_CN/core-api/irq/irq-domain.rst b/Documentation/translations/zh_CN/core-api/irq/irq-domain.rst index 4a2d3b27aa4d21..aaefeda0e16444 100644 --- a/Documentation/translations/zh_CN/core-api/irq/irq-domain.rst +++ b/Documentation/translations/zh_CN/core-api/irq/irq-domain.rst @@ -109,10 +109,6 @@ irq_domain维护着从hwirq号到Linux IRQ的radix的树状映射。 当一个hw 如果hwirq号可以非常大，树状映射是一个很好的选择，因为它不需要分配一个和最大hwirq 号一样大的表。 缺点是，hwirq到IRQ号的查找取决于表中有多少条目。 -irq_domain_add_tree()和irq_domain_create_tree()在功能上是等价的，除了第一 -个参数不同——前者接受一个Open Firmware特定的 'struct device_node' ，而后者接受 -一个更通用的抽象 'struct fwnode_handle' 。 - 很少有驱动应该需要这个映射。 无映射 diff --git a/Documentation/translations/zh_CN/dev-tools/gdb-kernel-debugging.rst b/Documentation/translations/zh_CN/dev-tools/gdb-kernel-debugging.rst index 282aacd3344285..0b382a32b3fec6 100644 --- a/Documentation/translations/zh_CN/dev-tools/gdb-kernel-debugging.rst +++ b/Documentation/translations/zh_CN/dev-tools/gdb-kernel-debugging.rst @@ -2,7 +2,7 @@ .. include:: ../disclaimer-zh_CN.rst -:Original: Documentation/dev-tools/gdb-kernel-debugging.rst +:Original: Documentation/process/debugging/gdb-kernel-debugging.rst :Translator: 高超 gao chao 通过gdb调试内核和模块 diff --git a/Documentation/translations/zh_CN/doc-guide/checktransupdate.rst b/Documentation/translations/zh_CN/doc-guide/checktransupdate.rst index d20b4ce66b9fd0..dbfd65398077ce 100644 --- a/Documentation/translations/zh_CN/doc-guide/checktransupdate.rst +++ b/Documentation/translations/zh_CN/doc-guide/checktransupdate.rst @@ -28,15 +28,15 @@ :: - ./scripts/checktransupdate.py --help + tools/docs/checktransupdate.py --help 具体用法请参考参数解析器的输出 示例 -- ``./scripts/checktransupdate.py -l zh_CN`` +- ``tools/docs/checktransupdate.py -l zh_CN`` 这将打印 zh_CN 语言中需要更新的所有文件。 -- ``./scripts/checktransupdate.py Documentation/translations/zh_CN/dev-tools/testing-overview.rst`` +- ``tools/docs/checktransupdate.py Documentation/translations/zh_CN/dev-tools/testing-overview.rst`` 这将只打印指定文件的状态。 然后输出类似如下的内容： diff --git a/Documentation/translations/zh_CN/doc-guide/contributing.rst b/Documentation/translations/zh_CN/doc-guide/contributing.rst index 394a13b438b0f9..b0c8ba782b1665 100644 --- a/Documentation/translations/zh_CN/doc-guide/contributing.rst +++ b/Documentation/translations/zh_CN/doc-guide/contributing.rst @@ -124,7 +124,7 @@ C代码编译器发出的警告常常会被视为误报，从而导致出现了 这使得这些信息更难找到，例如使Sphinx无法生成指向该文档的链接。将 ``kernel-doc`` 指令添加到文档中以引入这些注释可以帮助社区获得为编写注释所做工作的全部价值。 -``scripts/find-unused-docs.sh`` 工具可以用来找到这些被忽略的评论。 +``tools/docs/find-unused-docs.sh`` 工具可以用来找到这些被忽略的评论。 请注意，将导出的函数和数据结构引入文档是最有价值的。许多子系统还具有供内部 使用的kernel-doc注释；除非这些注释放在专门针对相关子系统开发人员的文档中， diff --git a/Documentation/translations/zh_CN/doc-guide/parse-headers.rst b/Documentation/translations/zh_CN/doc-guide/parse-headers.rst index a08819e904ed78..65d9dc5143ff22 100644 --- a/Documentation/translations/zh_CN/doc-guide/parse-headers.rst +++ b/Documentation/translations/zh_CN/doc-guide/parse-headers.rst @@ -13,20 +13,20 @@ 有时，为了描述用户空间API并在代码和文档之间生成交叉引用，需要包含头文件和示例 C代码。为用户空间API文件添加交叉引用还有一个好处：如果在文档中找不到相应符号， Sphinx将生成警告。这有助于保持用户空间API文档与内核更改同步。 -:ref:`parse_headers.pl ` 提供了生成此类交叉引用的一种方法。 +:ref:`parse_headers.py ` 提供了生成此类交叉引用的一种方法。 在构建文档时，必须通过Makefile调用它。有关如何在内核树中使用它的示例，请参阅 ``Documentation/userspace-api/media/Makefile`` 。 .. _parse_headers_zh: -parse_headers.pl +parse_headers.py ---------------- 脚本名称 ~~~~~~~~ -parse_headers.pl——解析一个C文件，识别函数、结构体、枚举、定义并对Sphinx文档 +parse_headers.py——解析一个C文件，识别函数、结构体、枚举、定义并对Sphinx文档 创建交叉引用。 @@ -34,7 +34,7 @@ parse_headers.pl——解析一个C文件，识别函数、结构体、枚举、 ~~~~~~~~ -\ **parse_headers.pl**\ [<选项>] <输出文件> [<例外文件>] +\ **parse_headers.py**\ [<选项>] <输出文件> [<例外文件>] <选项> 可以是： --debug, --help 或 --usage 。 diff --git a/Documentation/translations/zh_CN/doc-guide/sphinx.rst b/Documentation/translations/zh_CN/doc-guide/sphinx.rst index 23eac67fbc30b8..3375c6f3a811ab 100644 --- a/Documentation/translations/zh_CN/doc-guide/sphinx.rst +++ b/Documentation/translations/zh_CN/doc-guide/sphinx.rst @@ -84,7 +84,7 @@ PDF和LaTeX构建 这有一个脚本可以自动检查Sphinx依赖项。如果它认得您的发行版，还会提示您所用发行 版的安装命令:: - $ ./scripts/sphinx-pre-install + $ ./tools/docs/sphinx-pre-install Checking if the needed tools for Fedora release 26 (Twenty Six) are available Warning: better to also install "texlive-luatex85". You should run: @@ -94,7 +94,7 @@ PDF和LaTeX构建 . sphinx_2.4.4/bin/activate pip install -r Documentation/sphinx/requirements.txt - Can't build as 1 mandatory dependency is missing at ./scripts/sphinx-pre-install line 468. + Can't build as 1 mandatory dependency is missing at ./tools/docs/sphinx-pre-install line 468. 默认情况下，它会检查html和PDF的所有依赖项，包括图像、数学表达式和LaTeX构建的 需求，并假设将使用虚拟Python环境。html构建所需的依赖项被认为是必需的，其他依 diff --git a/Documentation/translations/zh_CN/filesystems/dnotify.rst b/Documentation/translations/zh_CN/filesystems/dnotify.rst new file mode 100644 index 00000000000000..5ab109b9424c7e --- /dev/null +++ b/Documentation/translations/zh_CN/filesystems/dnotify.rst @@ -0,0 +1,67 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/filesystems/dnotify.rst + +:翻译: + + 王龙杰 Wang Longjie + +============== +Linux 目录通知 +============== + + Stephen Rothwell + +目录通知的目的是使用户应用程序能够在目录或目录中的任何文件发生变更时收到通知。基本机制包括应用程序 +通过 fcntl(2) 调用在目录上注册通知，通知本身则通过信号传递。 + +应用程序可以决定希望收到哪些 “事件” 的通知。当前已定义的事件如下： + + ========= ===================================== + DN_ACCESS 目录中的文件被访问（read） + DN_MODIFY 目录中的文件被修改（write,truncate） + DN_CREATE 目录中创建了文件 + DN_DELETE 目录中的文件被取消链接 + DN_RENAME 目录中的文件被重命名 + DN_ATTRIB 目录中的文件属性被更改（chmod,chown） + ========= ===================================== + +通常，应用程序必须在每次通知后重新注册，但如果将 DN_MULTISHOT 与事件掩码进行或运算，则注册 +将一直保持有效，直到被显式移除（通过注册为不接收任何事件）。 + +默认情况下，SIGIO 信号将被传递给进程，且不附带其他有用的信息。但是，如果使用 F_SETSIG fcntl(2) +调用让内核知道要传递哪个信号，一个 siginfo 结构体将被传递给信号处理程序，该结构体的 si_fd 成员将 +包含与发生事件的目录相关联的文件描述符。 + +应用程序最好选择一个实时信号（SIGRTMIN + ），以便通知可以被排队。如果指定了 DN_MULTISHOT， +这一点尤为重要。注意，SIGRTMIN 通常是被阻塞的，因此最好使用（至少）SIGRTMIN + 1。 + +实现预期（特性与缺陷 :-)） +-------------------------- + +对于文件的任何本地访问，通知都应能正常工作，即使实际文件系统位于远程服务器上。这意味着，对本地用户 +模式服务器提供的文件的远程访问应能触发通知。同样的，对本地内核 NFS 服务器提供的文件的远程访问 +也应能触发通知。 + +为了尽可能减小对文件系统代码的影响，文件硬链接的问题已被忽略。因此，如果一个文件（x）存在于两个 +目录（a 和 b）中，通过名称”a/x”对该文件进行的更改应通知给期望接收目录“a”通知的程序，但不会 +通知给期望接收目录“b”通知的程序。 + +此外，取消链接的文件仍会在它们链接到的最后一个目录中触发通知。 + +配置 +---- + +Dnotify 由 CONFIG_DNOTIFY 配置选项控制。禁用该选项时，fcntl(fd, F_NOTIFY, ...) 将返 +回 -EINVAL。 + +示例 +---- +具体示例可参见 tools/testing/selftests/filesystems/dnotify_test.c。 + +注意 +---- +从 Linux 2.6.13 开始，dnotify 已被 inotify 取代。有关 inotify 的更多信息，请参见 +Documentation/filesystems/inotify.rst。 diff --git a/Documentation/translations/zh_CN/filesystems/gfs2-glocks.rst b/Documentation/translations/zh_CN/filesystems/gfs2-glocks.rst new file mode 100644 index 00000000000000..abfd2f2f94e913 --- /dev/null +++ b/Documentation/translations/zh_CN/filesystems/gfs2-glocks.rst @@ -0,0 +1,211 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/filesystems/gfs2-glocks.rst + +:翻译: + + 邵明寅 Shao Mingyin + +:校译: + + 杨涛 yang tao + +================== +Glock 内部加锁规则 +================== + +本文档阐述 glock 状态机内部运作的基本原理。每个 glock（即 +fs/gfs2/incore.h 中的 struct gfs2_glock）包含两把主要的内部锁： + + 1. 自旋锁（gl_lockref.lock）：用于保护内部状态（如 + gl_state、gl_target）和持有者列表（gl_holders） + 2. 非阻塞的位锁（GLF_LOCK）：用于防止其他线程同时调用 + DLM 等操作。若某线程获取此锁，则在释放时必须调用 + run_queue（通常通过工作队列），以确保所有待处理任务 + 得以完成。 + +gl_holders 列表包含与该 glock 关联的所有排队锁请求（不 +仅是持有者）。若存在已持有的锁，它们将位于列表开头的连 +续条目中。锁的授予严格遵循排队顺序。 + +glock 层用户可请求三种锁状态：共享（SH）、延迟（DF）和 +排他（EX）。它们对应以下 DLM 锁模式： + +========== ====== ===================================================== +Glock 模式 DLM 锁模式 +========== ====== ===================================================== + UN IV/NL 未加锁（无关联的 DLM 锁）或 NL + SH PR 受保护读（Protected read） + DF CW 并发写（Concurrent write） + EX EX 排他（Exclusive） +========== ====== ===================================================== + +因此，DF 本质上是一种与“常规”共享锁模式（SH）互斥的共 +享模式。在 GFS2 中，DF 模式专用于直接 I/O 操作。Glock +本质上是锁加缓存管理例程的组合，其缓存规则如下： + +========== ============== ========== ========== ============== +Glock 模式 缓存元数据 缓存数据 脏数据 脏元数据 +========== ============== ========== ========== ============== + UN 否 否 否 否 + DF 是 否 否 否 + SH 是 是 否 否 + EX 是 是 是 是 +========== ============== ========== ========== ============== + +这些规则通过为每种 glock 定义的操作函数实现。并非所有 +glock 类型都使用全部的模式，例如仅 inode glock 使用 DF 模 +式。 + +glock 操作函数及类型常量说明表： + +============== ======================================================== +字段 用途 +============== ======================================================== +go_sync 远程状态变更前调用（如同步脏数据） +go_xmote_bh 远程状态变更后调用（如刷新缓存） +go_inval 远程状态变更需使缓存失效时调用 +go_instantiate 获取 glock 时调用 +go_held 每次获取 glock 持有者时调用 +go_dump 为 debugfs 文件打印对象内容，或出错时将 glock 转储至日志 +go_callback 若 DLM 发送回调以释放此锁时调用 +go_unlocked 当 glock 解锁时调用（dlm_unlock()） +go_type glock 类型，``LM_TYPE_*`` +go_flags 若 glock 关联地址空间，则设置GLOF_ASPACE 标志 +============== ======================================================== + +每种锁的最短持有时间是指在远程锁授予后忽略远程降级请求 +的时间段。此举旨在防止锁在集群节点间持续弹跳而无实质进 +展的情况，此现象常见于多节点写入的共享内存映射文件。通 +过延迟响应远程回调的降级操作，为用户空间程序争取页面取 +消映射前的处理时间。 + +未来计划将 glock 的 "EX" 模式设为本地共享，使本地锁通 +过 i_mutex 实现而非 glock。 + +glock 操作函数的加锁规则： + +============== ====================== ============================= +操作 GLF_LOCK 位锁持有 gl_lockref.lock 自旋锁持有 +============== ====================== ============================= +go_sync 是 否 +go_xmote_bh 是 否 +go_inval 是 否 +go_instantiate 否 否 +go_held 否 否 +go_dump 有时 是 +go_callback 有时（N/A） 是 +go_unlocked 是 否 +============== ====================== ============================= + +.. Note:: + + 若入口处持有锁则操作期间不得释放位锁或自旋锁。 + go_dump 和 do_demote_ok 严禁阻塞。 + 仅当 glock 状态指示其缓存最新数据时才会调用 go_dump。 + +GFS2 内部的 glock 加锁顺序： + + 1. i_rwsem（如需要） + 2. 重命名 glock（仅用于重命名） + 3. Inode glock + （父级优先于子级，同级 inode 按锁编号排序） + 4. Rgrp glock（用于（反）分配操作） + 5. 事务 glock（通过 gfs2_trans_begin，非读操作） + 6. i_rw_mutex（如需要） + 7. 页锁（始终最后，至关重要！） + +每个 inode 对应两把 glock：一把管理 inode 本身（加锁顺 +序如上），另一把（称为 iopen glock）结合 inode 的 +i_nlink 字段决定 inode 生命周期。inode 加锁基于单个 +inode，rgrp 加锁基于单个 rgrp。通常优先获取本地锁再获 +取集群锁。 + +Glock 统计 +---------- + +统计分为两类：超级块相关统计和单个 glock 相关统计。超级 +块统计按每 CPU 执行以减少收集开销，并进一步按 glock 类 +型细分。所有时间单位为纳秒。 + +超级块和 glock 统计收集相同信息。超级块时序统计为 glock +时序统计提供默认值，使新建 glock 具有合理的初始值。每个 +glock 的计数器在创建时初始化为零，当 glock 从内存移除时 +统计丢失。 + +统计包含三组均值/方差对及两个计数器。均值/方差对为平滑 +指数估计，算法与网络代码中的往返时间计算类似（参见《 +TCP/IP详解 卷1》第21.3节及《卷2》第25.10节）。与 TCP/IP +案例不同，此处均值/方差未缩放且单位为整数纳秒。 + +三组均值/方差对测量以下内容： + + 1. DLM 锁时间（非阻塞请求） + 2. DLM 锁时间（阻塞请求） + 3. 请求间隔时间（指向 DLM） + +非阻塞请求指无论目标 DLM 锁处于何种状态均能立即完成的请求。 +当前满足条件的请求包括：(a)锁当前状态为互斥（如锁降级）、 +(b)请求状态为空置或解锁（同样如锁降级）、或(c)设置"try lock" +标志的请求。其余锁请求均属阻塞请求。 + +两个计数器分别统计： + 1. 锁请求总数（决定均值/方差计算的数据量） + 2. glock 代码顶层的持有者排队数（通常远大于 DLM 锁请求数） + +为什么收集这些统计数据？我们需深入分析时序参数的动因如下： + +1. 更精准设置 glock "最短持有时间" +2. 快速识别性能问题 +3. 改进资源组分配算法（基于锁等待时间而非盲目 "try lock"） + +因平滑更新的特性，采样量的阶跃变化需经 8 次采样（方差需 +4 次）才能完全体现，解析结果时需审慎考虑。 + +通过锁请求完成时间和 glock 平均锁请求间隔时间，可计算节 +点使用 glock 时长与集群共享时长的占比，对设置锁最短持有 +时间至关重要。 + +我们已采取严谨措施，力求精准测量目标量值。任何测量系统均 +存在误差，但我期望当前方案已达到合理精度极限。 + +超级块状态统计路径:: + + /sys/kernel/debug/gfs2//sbstats + +Glock 状态统计路径:: + + /sys/kernel/debug/gfs2//glstats + +（假设 debugfs 挂载于 /sys/kernel/debug，且 替 +换为对应 GFS2 文件系统名） + +输出缩写说明： + +========= ============================================ +srtt 非阻塞 DLM 请求的平滑往返时间 +srttvar srtt 的方差估计 +srttb （潜在）阻塞 DLM 请求的平滑往返时间 +srttvarb srttb 的方差估计 +sirt DLM 请求的平滑请求间隔时间 +sirtvar sirt 的方差估计 +dlm DLM 请求数（glstats 文件中的 dcnt） +queue 排队的 glock 请求数（glstats 文件中的 qcnt） +========= ============================================ + +sbstats文件按glock类型（每种类型8行）和CPU核心（每CPU一列） +记录统计数据集。glstats文件则为每个glock提供统计集，其格式 +与glocks文件类似，但所有时序统计量均采用均值/方差格式存储。 + +gfs2_glock_lock_time 跟踪点实时输出目标 glock 的当前统计 +值，并附带每次接收到的dlm响应附加信息： + +====== ============ +status DLM 请求状态 +flags DLM 请求标志 +tdiff 该请求的耗时 +====== ============ + +（其余字段同上表） diff --git a/Documentation/translations/zh_CN/filesystems/gfs2-uevents.rst b/Documentation/translations/zh_CN/filesystems/gfs2-uevents.rst new file mode 100644 index 00000000000000..3975c454411823 --- /dev/null +++ b/Documentation/translations/zh_CN/filesystems/gfs2-uevents.rst @@ -0,0 +1,97 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/filesystems/gfs2-uevents.rst + +:翻译: + + 邵明寅 Shao Mingyin + +:校译: + + 杨涛 yang tao + +=============== +uevents 与 GFS2 +=============== + +在 GFS2 文件系统的挂载生命周期内，会生成多个 uevent。 +本文档解释了这些事件的含义及其用途（被 gfs2-utils 中的 gfs_controld 使用）。 + +GFS2 uevents 列表 +================= + +1. ADD +------ + +ADD 事件发生在挂载时。它始终是新建文件系统生成的第一个 uevent。如果挂载成 +功，随后会生成 ONLINE uevent。如果挂载失败，则随后会生成 REMOVE uevent。 + +ADD uevent 包含两个环境变量：SPECTATOR=[0|1] 和 RDONLY=[0|1]，分别用 +于指定文件系统的观察者状态（一种未分配日志的只读挂载）和只读状态（已分配日志）。 + +2. ONLINE +--------- + +ONLINE uevent 在成功挂载或重新挂载后生成。它具有与 ADD uevent 相同的环 +境变量。ONLINE uevent 及其用于标识观察者和 RDONLY 状态的两个环境变量是较 +新版本内核引入的功能（2.6.32-rc+ 及以上），旧版本内核不会生成此事件。 + +3. CHANGE +--------- + +CHANGE uevent 在两种场景下使用。一是报告第一个节点成功挂载文件系统时 +（FIRSTMOUNT=Done）。这作为信号告知 gfs_controld，此时集群中其他节点可以 +安全挂载该文件系统。 + +另一个 CHANGE uevent 用于通知文件系统某个日志的日志恢复已完成。它包含两个 +环境变量：JID= 指定刚恢复的日志 ID，RECOVERY=[Done|Failed] 表示操作成 +功与否。这些 uevent 会在每次日志恢复时生成，无论是在初始挂载过程中，还是 +gfs_controld 通过 /sys/fs/gfs2//lock_module/recovery 文件 +请求特定日志恢复的结果。 + +由于早期版本的 gfs_controld 使用 CHANGE uevent 时未检查环境变量以确定状 +态，若为其添加新功能，存在用户工具版本过旧导致集群故障的风险。因此，在新增用 +于标识成功挂载或重新挂载的 uevent 时，选择了使用 ONLINE uevent。 + +4. OFFLINE +---------- + +OFFLINE uevent 仅在文件系统发生错误时生成，是 "withdraw" 机制的一部分。 +当前该事件未提供具体错误信息，此问题有待修复。 + +5. REMOVE +--------- + +REMOVE uevent 在挂载失败结束或卸载文件系统时生成。所有 REMOVE uevent +之前都至少存在同一文件系统的 ADD uevent。与其他 uevent 不同，它由内核的 +kobject 子系统自动生成。 + + +所有 GFS2 uevents 的通用信息（uevent 环境变量） +=============================================== + +1. LOCKTABLE= +-------------- + +LOCKTABLE 是一个字符串，其值来源于挂载命令行（locktable=）或 fstab 文件。 +它用作文件系统标签，并为 lock_dlm 类型的挂载提供加入集群所需的信息。 + +2. LOCKPROTO= +------------- + +LOCKPROTO 是一个字符串，其值取决于挂载命令行或 fstab 中的设置。其值将是 +lock_nolock 或 lock_dlm。未来可能支持其他锁管理器。 + +3. JOURNALID= +------------- + +如果文件系统正在使用日志（观察者挂载不分配日志），则所有 GFS2 uevent 中都 +会包含此变量，其值为数字形式的日志 ID。 + +4. UUID= +-------- + +在较新版本的 gfs2-utils 中，mkfs.gfs2 会向文件系统超级块写入 UUID。若存 +在 UUID，所有与该文件系统相关的 uevent 中均会包含此信息。 diff --git a/Documentation/translations/zh_CN/filesystems/gfs2.rst b/Documentation/translations/zh_CN/filesystems/gfs2.rst new file mode 100644 index 00000000000000..ffa62b12b019eb --- /dev/null +++ b/Documentation/translations/zh_CN/filesystems/gfs2.rst @@ -0,0 +1,57 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/filesystems/gfs2.rst + +:翻译: + + 邵明寅 Shao Mingyin + +:校译: + + 杨涛 yang tao + +===================================== +全局文件系统 2 (Global File System 2) +===================================== + +GFS2 是一个集群文件系统。它允许一组计算机同时使用在它们之间共享的块设备（通 +过 FC、iSCSI、NBD 等）。GFS2 像本地文件系统一样读写块设备，但也使用一个锁 +模块来让计算机协调它们的 I/O 操作，从而维护文件系统的一致性。GFS2 的出色特 +性之一是完美一致性——在一台机器上对文件系统所做的更改会立即显示在集群中的所 +有其他机器上。 + +GFS2 使用可互换的节点间锁定机制，当前支持的机制有： + + lock_nolock + - 允许将 GFS2 用作本地文件系统 + + lock_dlm + - 使用分布式锁管理器 (dlm) 进行节点间锁定。 + 该 dlm 位于 linux/fs/dlm/ + +lock_dlm 依赖于在上述 URL 中找到的用户空间集群管理系统。 + +若要将 GFS2 用作本地文件系统，则不需要外部集群系统，只需：: + + $ mkfs -t gfs2 -p lock_nolock -j 1 /dev/block_device + $ mount -t gfs2 /dev/block_device /dir + +在所有集群节点上都需要安装 gfs2-utils 软件包；对于 lock_dlm，您还需要按 +照文档配置 dlm 和 corosync 用户空间工具。 + +gfs2-utils 可在 https://pagure.io/gfs2-utils 找到。 + +GFS2 在磁盘格式上与早期版本的 GFS 不兼容，但它已相当接近。 + +以下手册页 (man pages) 可在 gfs2-utils 中找到： + + ============ ============================================= + fsck.gfs2 用于修复文件系统 + gfs2_grow 用于在线扩展文件系统 + gfs2_jadd 用于在线向文件系统添加日志 + tunegfs2 用于操作、检查和调优文件系统 + gfs2_convert 用于将 gfs 文件系统原地转换为 GFS2 + mkfs.gfs2 用于创建文件系统 + ============ ============================================= diff --git a/Documentation/translations/zh_CN/filesystems/index.rst b/Documentation/translations/zh_CN/filesystems/index.rst index 9f2a8b003778a0..fcc79ff9fdad1f 100644 --- a/Documentation/translations/zh_CN/filesystems/index.rst +++ b/Documentation/translations/zh_CN/filesystems/index.rst @@ -15,6 +15,16 @@ Linux Kernel中的文件系统 文件系统（VFS）层以及基于其上的各种文件系统如何工作呈现给大家。当前\ 可以看到下面的内容。 +核心 VFS 文档 +============= + +有关 VFS 层本身以及其算法工作方式的文档，请参阅这些手册。 + +.. toctree:: + :maxdepth: 1 + + dnotify + 文件系统 ======== @@ -26,4 +36,9 @@ Linux Kernel中的文件系统 virtiofs debugfs tmpfs - + ubifs + ubifs-authentication + gfs2 + gfs2-uevents + gfs2-glocks + inotify diff --git a/Documentation/translations/zh_CN/filesystems/inotify.rst b/Documentation/translations/zh_CN/filesystems/inotify.rst new file mode 100644 index 00000000000000..b4d740aca946df --- /dev/null +++ b/Documentation/translations/zh_CN/filesystems/inotify.rst @@ -0,0 +1,80 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/filesystems/inotify.rst + +:翻译: + + 王龙杰 Wang Longjie + +========================================== +Inotify - 一个强大且简单的文件变更通知系统 +========================================== + + + +文档由 Robert Love 于 2005 年 3 月 15 日开始撰写 + +文档由 Zhang Zhen 于 2015 年 1 月 4 日更新 + + - 删除了已废弃的接口，关于用户接口请参考手册页。 + +(i) 基本原理 + +问： + 不将监控项与被监控对象打开的文件描述符（fd）绑定，这背后的设计决策是什么？ + +答： + 监控项会与打开的 inotify 设备相关联，而非与打开的文件相关联。这解决了 dnotify 的主要问题： + 保持文件打开会锁定文件，更糟的是，还会锁定挂载点。因此，dnotify 在带有可移动介质的桌面系统 + 上难以使用，因为介质将无法被卸载。监控文件不应要求文件处于打开状态。 + +问： + 与每个监控项一个文件描述符的方式相比，采用每个实例一个文件描述符的设计决策是出于什么 + 考虑？ + +答： + 每个监控项一个文件描述符会很快的消耗掉超出允许数量的文件描述符，其数量会超出实际可管理的范 + 围，也会超出 select() 能高效处理的范围。诚然，root 用户可以提高每个进程的文件描述符限制， + 用户也可以使用 epoll，但同时要求这两者是不合理且多余的。一个监控项所消耗的内存比一个打开的文 + 件要少，因此将这两个数量空间分开是合理的。当前的设计正是用户空间开发者所期望的：用户只需初始 + 化一次 inotify，然后添加 n 个监控项，而这只需要一个文件描述符，无需调整文件描述符限制。初 + 始化 inotify 实例初始化两千次是很荒谬的。如果我们能够简洁地实现用户空间的偏好——而且我们 + 确实可以，idr 层让这类事情变得轻而易举——那么我们就应该这么做。 + + 还有其他合理的理由。如果只有一个文件描述符，那就只需要在该描述符上阻塞，它对应着一个事件队列。 + 这个单一文件描述符会返回所有的监控事件以及任何可能的带外数据。而如果每个文件描述符都是一个独 + 立的监控项， + + - 将无法知晓事件的顺序。文件 foo 和文件 bar 上的事件会触发两个文件描述符上的 poll()， + 但无法判断哪个事件先发生。而用单个队列就可以很容易的提供事件的顺序。这种顺序对现有的应用程 + 序（如 Beagle）至关重要。想象一下，如果“mv a b ; mv b a”这样的事件没有顺序会是什么 + 情况。 + + - 我们将不得不维护 n 个文件描述符和 n 个带有状态的内部队列，而不是仅仅一个。这在 kernel 中 + 会混乱得多。单个线性队列是合理的数据结构。 + + - 用户空间开发者更青睐当前的 API。例如，Beagle 的开发者们就很喜欢它。相信我，我问过他们。 + 这并不奇怪：谁会想通过 select 来管理以及阻塞在 1000 个文件描述符上呢？ + + - 无法获取带外数据。 + + - 1024 这个数量仍然太少。 ;-) + + 当要设计一个可扩展到数千个目录的文件变更通知系统时，处理数千个文件描述符似乎并不是合适的接口。 + 这太繁琐了。 + + 此外，创建多个实例、处理多个队列以及相应的多个文件描述符是可行的。不必是每个进程对应一个文件描 + 述符；而是每个队列对应一个文件描述符，一个进程完全可能需要多个队列。 + +问： + 为什么采用系统调用的方式？ + +答： + 糟糕的用户空间接口是 dnotify 的第二大问题。信号对于文件通知来说是一种非常糟糕的接口。其实对 + 于其他任何事情，信号也都不是好的接口。从各个角度来看，理想的解决方案是基于文件描述符的，它允许 + 基本的文件 I/O 操作以及 poll/select 操作。获取文件描述符和管理监控项既可以通过设备文件来 + 实现，也可以通过一系列新的系统调用来实现。我们决定采用一系列系统调用，因为这是提供新的内核接口 + 的首选方法。两者之间唯一真正的区别在于，我们是想使用 open(2) 和 ioctl(2)，还是想使用几 + 个新的系统调用。系统调用比 ioctl 更有优势。 diff --git a/Documentation/translations/zh_CN/filesystems/ubifs-authentication.rst b/Documentation/translations/zh_CN/filesystems/ubifs-authentication.rst new file mode 100644 index 00000000000000..0e7cf7707e262e --- /dev/null +++ b/Documentation/translations/zh_CN/filesystems/ubifs-authentication.rst @@ -0,0 +1,354 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/filesystems/ubifs-authentication.rst + +:翻译: + + 邵明寅 Shao Mingyin + +:校译: + + 杨涛 yang tao + +============= +UBIFS认证支持 +============= + +引言 +==== +UBIFS 利用 fscrypt 框架为文件内容及文件名提供保密性。这能防止攻击者在单一 +时间点读取文件系统内容的攻击行为。典型案例是智能手机丢失时，攻击者若没有文件 +系统解密密钥则无法读取设备上的个人数据。 + +在现阶段，UBIFS 加密尚不能防止攻击者篡改文件系统内容后用户继续使用设备的攻 +击场景。这种情况下，攻击者可任意修改文件系统内容而不被用户察觉。例如修改二 +进制文件使其执行时触发恶意行为 [DMC-CBC-ATTACK]。由于 UBIFS 大部分文件 +系统元数据以明文存储，使得文件替换和内容篡改变得相当容易。 + +其他全盘加密系统（如 dm-crypt）可以覆盖所有文件系统元数据，这类系统虽然能 +增加这种攻击的难度，但特别是当攻击者能多次访问设备时，也有可能实现攻击。对于 +基于 Linux 块 IO 层的 dm-crypt 等文件系统，可通过 dm-integrity 或 +dm-verity 子系统[DM-INTEGRITY, DM-VERITY]在块层实现完整数据认证，这些 +功能也可与 dm-crypt 结合使用[CRYPTSETUP2]。 + +本文描述一种为 UBIFS 实现文件内容认证和完整元数据认证的方法。由于 UBIFS +使用 fscrypt 进行文件内容和文件名加密，认证系统可与 fscrypt 集成以利用密 +钥派生等现有功能。但系统同时也应支持在不启用加密的情况下使用 UBIFS 认证。 + + +MTD, UBI & UBIFS +---------------- +在 Linux 中，MTD（内存技术设备）子系统提供访问裸闪存设备的统一接口。运行于 +MTD 之上的重要子系统是 UBI（无序块映像），它为闪存设备提供卷管理功能，类似 +于块设备的 LVM。此外，UBI 还处理闪存特有的磨损均衡和透明 I/O 错误处理。 +UBI 向上层提供逻辑擦除块(LEB)，并透明地映射到闪存的物理擦除块(PEB)。 + +UBIFS 是运行于 UBI 之上的裸闪存文件系统。因此 UBI 处理磨损均衡和部分闪存 +特性，而 UBIFS专注于可扩展性、性能和可恢复性。 + +:: + + +------------+ +*******+ +-----------+ +-----+ + | | * UBIFS * | UBI-BLOCK | | ... | + | JFFS/JFFS2 | +*******+ +-----------+ +-----+ + | | +-----------------------------+ +-----------+ +-----+ + | | | UBI | | MTD-BLOCK | | ... | + +------------+ +-----------------------------+ +-----------+ +-----+ + +------------------------------------------------------------------+ + | MEMORY TECHNOLOGY DEVICES (MTD) | + +------------------------------------------------------------------+ + +-----------------------------+ +--------------------------+ +-----+ + | NAND DRIVERS | | NOR DRIVERS | | ... | + +-----------------------------+ +--------------------------+ +-----+ + + 图1：处理裸闪存的 Linux 内核子系统 + + + +UBIFS 内部维护多个持久化在闪存上的数据结构： + +- *索引*：存储在闪存上的 B+ 树，叶节点包含文件系统数据 +- *日志*：在更新闪存索引前收集文件系统变更的辅助数据结构，可减少闪存磨损 +- *树节点缓存(TNC)*：反映当前文件系统状态的内存 B+ 树，避免频繁读取闪存。 + 本质上是索引的内存表示，但包含额外属性 +- *LEB属性树(LPT)*：用于统计每个 UBI LEB 空闲空间的闪存B+树 + +本节后续将详细讨论UBIFS的闪存数据结构。因为 TNC 不直接持久化到闪存，其在此 +处的重要性较低。更多 UBIFS 细节详见[UBIFS-WP]。 + + +UBIFS 索引与树节点缓存 +~~~~~~~~~~~~~~~~~~~~~~ + +UBIFS 在闪存上的基础实体称为 *节点* ，包含多种类型。如存储文件内容块的数据 +节点 +( ``struct ubifs_data_node`` )，或表示 VFS 索引节点的 inode 节点 +( ``struct ubifs_ino_node`` )。几乎所有节点共享包含节点类型、长度、序列 +号等基础信息的通用头 +( ``ubifs_ch`` )（见内核源码 ``fs/ubifs/ubifs-media.h`` ）。LPT条目 +和填充节点（用于填充 LEB +尾部不可用空间）等次要节点类型除外。 + +为避免每次变更重写整个 B+ 树，UBIFS 采用 *wandering tree* 实现：仅重写 +变更节点，旧版本被标记废弃而非立即擦除。因此索引不固定存储于闪存某处，而是在 +闪存上 *wanders* ，在 LEB 被 UBIFS 重用前，闪存上会存在废弃部分。为定位 +最新索引，UBIFS 在 UBI LEB 1 存储称为 *主节点* 的特殊节点，始终指向最新 +UBIFS 索引根节点。为增强可恢复性，主节点还备份到 LEB 2。因此挂载 UBIFS 只 +需读取 LEB 1 和 2 获取当前主节点，进而定位最新闪存索引。 + +TNC 是闪存索引的内存表示，包含未持久化的运行时属性（如脏标记）。TNC 作为回 +写式缓存，所有闪存索引修改都通过 TNC 完成。与其他缓存类似，TNC 无需将完整 +索引全部加载到内存中，需要时从闪存读取部分内容。 *提交* 是更新闪存文件系统 +结构（如索引）的 UBIFS 操作。每次提交时，标记为脏的 TNC 节点被写入闪存以更 +新持久化索引。 + + +日志 +~~~~ + +为避免闪存磨损，索引仅在满足特定条件（如 ``fsync(2)`` ）时才持久化（提交）。 +日志用于记录索引提交之间的所有变更（以 inode 节点、数据节点等形式）。挂载时 +从闪存读取日志并重放到 TNC（此时 TNC 按需从闪存索引创建）。 + +UBIFS 保留一组专用于日志的 LEB（称为 *日志区* ）。日志区 LEB 数量在文件系 +统创建时配置（使用 ``mkfs.ubifs`` ）并存储于超级块节点。日志区仅含两类节 +点： *引用节点* 和 *提交起始节点* 。执行索引提交时写入提交起始节点，每次日 +志更新时写入引用节点。每个引用节点指向构成日志条目的其他节点（ inode 节点、 +数据节点等）在闪存上的位置，这些节点称为 *bud* ，描述包含数据的实际文件系 +统变更。 + +日志区以环形缓冲区维护。当日志将满时触发提交操作，同时写入提交起始节点。因此 +挂载时 UBIFS 查找最新提交起始节点，仅重放其后的引用节点。提交起始节点前的引 +用节点将被忽略（因其已属于闪存索引）。 + +写入日志条目时，UBIFS 首先确保有足够空间写入引用节点和该条目的 bud。然后先 +写引用节点，再写描述文件变更的 bud。在日志重放阶段，UBIFS 会记录每个参考节 +点，并检查其引用的 LEB位置以定位 buds。若这些数据损坏或丢失，UBIFS 会尝试 +通过重新读取 LEB 来恢复，但仅针对日志中最后引用的 LEB，因为只有它可能因断 +电而损坏。若恢复失败，UBIFS 将拒绝挂载。对于其他 LEB 的错误，UBIFS 会直接 +终止挂载操作。 + +:: + + | ---- LOG AREA ---- | ---------- MAIN AREA ------------ | + + -----+------+-----+--------+---- ------+-----+-----+--------------- + \ | | | | / / | | | \ + / CS | REF | REF | | \ \ DENT | INO | INO | / + \ | | | | / / | | | \ + ----+------+-----+--------+--- -------+-----+-----+---------------- + | | ^ ^ + | | | | + +------------------------+ | + | | + +-------------------------------+ + + + 图2：包含提交起始节点(CS)和引用节点(REF)的日志区闪存布局，引用节点指向含 + bud 的主区 + + +LEB属性树/表 +~~~~~~~~~~~~ + +LEB 属性树用于存储每个 LEB 的信息，包括 LEB 类型、LEB 上的空闲空间和 +*脏空间* （旧空间，废弃内容） [1]_ 的数量。因为 UBIFS 从不在单个 LEB 混 +合存储索引节点和数据节点，所以 LEB 的类型至关重要，每个 LEB 都有特定用途， +这对空闲空间计算非常有帮助。详见[UBIFS-WP]。 + +LEB 属性树也是 B+ 树，但远小于索引。因为其体积小，所以每次提交时都整块写入， +保存 LPT 是原子操作。 + + +.. [1] 由于LEB只能追加写入不能覆盖，空闲空间（即 LEB 剩余可写空间）与废弃 + 内容（先前写入但未擦除前不能覆盖）存在区别。 + + +UBIFS认证 +========= + +本章介绍UBIFS认证，使UBIFS能验证闪存上元数据和文件内容的真实性与完整性。 + + +威胁模型 +-------- + +UBIFS 认证可检测离线数据篡改。虽然不能防止篡改，但是能让（可信）代码检查闪 +存文件内容和文件系统元数据的完整性与真实性，也能检查文件内容被替换的攻击。 + +UBIFS 认证不防护全闪存内容回滚（攻击者可转储闪存内容并在后期还原）。也不防护 +单个索引提交的部分回滚（攻击者能部分撤销变更）。这是因为 UBIFS 不立即覆盖索 +引树或日志的旧版本，而是标记为废弃，稍后由垃圾回收擦除。攻击者可擦除当前树部 +分内容并还原闪存上尚未擦除的旧版本。因每次提交总会写入索引根节点和主节点的新 +版本而不覆盖旧版本，UBI 的磨损均衡操作（将内容从物理擦除块复制到另一擦除块 +且非原子擦除原块）进一步助长此问题。 + +UBIFS 认证不覆盖认证密钥提供后攻击者在设备执行代码的攻击，需结合安全启动和 +可信启动等措施确保设备仅执行可信代码。 + + +认证 +---- + +为完全信任从闪存读取的数据，所有存储在闪存的 UBIFS 数据结构均需认证： +- 包含文件内容、扩展属性、文件长度等元数据的索引 +- 通过记录文件系统变更来包含文件内容和元数据的日志 +- 存储 UBIFS 用于空闲空间统计的 UBI LEB 元数据的 LPT + + +索引认证 +~~~~~~~~ + +借助 *wandering tree* 概念，UBIFS 仅更新和持久化从叶节点到根节点的变更 +部分。这允许用子节点哈希增强索引树节点。最终索引基本成为 Merkle 树：因索引 +叶节点含实际文件系统数据，其父索引节点的哈希覆盖所有文件内容和元数据。文件 +变更时，UBIFS 索引从叶节点到根节点（含主节点）相应更新，此过程可挂钩以同步 +重新计算各变更节点的哈希。读取文件时，UBIFS 可从叶节点到根节点逐级验证哈希 +确保节点完整性。 + +为确保整个索引真实性，UBIFS 主节点存储基于密钥的哈希(HMAC)，覆盖自身内容及 +索引树根节点哈希。如前所述，主节点在索引持久化时（即索引提交时）总会写入闪存。 + +此方法仅修改 UBIFS 索引节点和主节点以包含哈希，其他类型节点保持不变，减少了 +对 UBIFS 用户（如嵌入式设备）宝贵的存储开销。 + +:: + + +---------------+ + | Master Node | + | (hash) | + +---------------+ + | + v + +-------------------+ + | Index Node #1 | + | | + | branch0 branchn | + | (hash) (hash) | + +-------------------+ + | ... | (fanout: 8) + | | + +-------+ +------+ + | | + v v + +-------------------+ +-------------------+ + | Index Node #2 | | Index Node #3 | + | | | | + | branch0 branchn | | branch0 branchn | + | (hash) (hash) | | (hash) (hash) | + +-------------------+ +-------------------+ + | ... | ... | + v v v + +-----------+ +----------+ +-----------+ + | Data Node | | INO Node | | DENT Node | + +-----------+ +----------+ +-----------+ + + + 图3：索引节点哈希与主节点 HMAC 的覆盖范围 + + + +健壮性性和断电安全性的关键在于以原子操作持久化哈希值与文件内容。UBIFS 现有 +的变更节点持久化机制专为此设计，能够确保断电时安全恢复。为索引节点添加哈希值 +不会改变该机制，因为每个哈希值都与其对应节点以原子操作同步持久化。 + + +日志认证 +~~~~~~~~ + +日志也需要认证。因为日志持续写入，必须频繁地添加认证信息以确保断电时未认证数 +据量可控。方法是从提交起始节点开始，对先前引用节点、当前引用节点和 bud 节点 +创建连续哈希链。适时地在bud节点间插入认证节点，这种新节点类型包含哈希链当前 +状态的 HMAC。因此日志可认证至最后一个认证节点。日志尾部无认证节点的部分无法 +认证，在日志重放时跳过。 + +日志认证示意图如下:: + + ,,,,,,,, + ,......,........................................... + ,. CS , hash1.----. hash2.----. + ,. | , . |hmac . |hmac + ,. v , . v . v + ,.REF#0,-> bud -> bud -> bud.-> auth -> bud -> bud.-> auth ... + ,..|...,........................................... + , | , + , | ,,,,,,,,,,,,,,, + . | hash3,----. + , | , |hmac + , v , v + , REF#1 -> bud -> bud,-> auth ... + ,,,|,,,,,,,,,,,,,,,,,, + v + REF#2 -> ... + | + V + ... + +因为哈希值包含引用节点，攻击者无法重排或跳过日志头重放，仅能移除日志尾部的 +bud 节点或引用节点，最大限度将文件系统回退至上次提交。 + +日志区位置存储于主节点。因为主节点通过 HMAC 认证，所以未经检测无法篡改。日 +志区大小在文件系统创建时由 `mkfs.ubifs` 指定并存储于超级块节点。为避免篡 +改此值及其他参数，超级块结构添加 HMAC。超级块节点存储在 LEB 0，仅在功能标 +志等变更时修改，文件变更时不修改。 + + +LPT认证 +~~~~~~~ + +LPT 根节点在闪存上的位置存储于 UBIFS 主节点。因为 LPT 每次提交时都以原子 +操作写入和读取，无需单独认证树节点。通过主节点存储的简单哈希保护完整 LPT +即可。因为主节点自身已认证，通过验证主节点真实性并比对存储的 LTP 哈希与读 +取的闪存 LPT 计算哈希值，即可验证 LPT 真实性。 + + +密钥管理 +-------- + +为了简化实现，UBIFS 认证使用单一密钥计算超级块、主节点、提交起始节点和引用 +节点的 HMAC。创建文件系统(`mkfs.ubifs`) 时需提供此密钥以认证超级块节点。 +挂载文件系统时也需此密钥验证认证节点并为变更生成新 HMAC。 + +UBIFS 认证旨在与 UBIFS 加密(fscrypt)协同工作以提供保密性和真实性。因为 +UBIFS 加密采用基于目录的差异化加密策略，可能存在多个 fscrypt 主密钥甚至未 +加密目录。而 UBIFS 认证采用全有或全无方式，要么认证整个文件系统要么完全不 +认证。基于此特性，且为确保认证机制可独立于加密功能使用，UBIFS 认证不与 +fscrypt 共享主密钥，而是维护独立的认证专用密钥。 + +提供认证密钥的API尚未定义，但可通过类似 fscrypt 的用户空间密钥环提供。需注 +意当前 fscrypt 方案存在缺陷，用户空间 API 终将变更[FSCRYPT-POLICY2]。 + +用户仍可通过用户空间提供单一口令或密钥覆盖 UBIFS 认证与加密。相应用户空间工 +具可解决此问题：除派生的 fscrypt 加密主密钥外，额外派生认证密钥。 + +为检查挂载时密钥可用性，UBIFS 超级块节点将额外存储认证密钥的哈希。此方法类 +似 fscrypt 加密策略 v2 提出的方法[FSCRYPT-POLICY2]。 + + +未来扩展 +======== + +特定场景下，若供应商需要向客户提供认证文件系统镜像，应该能在不共享 UBIFS 认 +证密钥的前提下实现。方法是在每个 HMAC 外额外存储数字签名，供应商随文件系统 +镜像分发公钥。若该文件系统后续需要修改，若后续需修改该文件系统，UBIFS 可在 +首次挂载时将全部数字签名替换为 HMAC，其处理逻辑与 IMA/EVM 子系统应对此类情 +况的方式类似。此时，HMAC 密钥需按常规方式预先提供。 + + +参考 +==== + +[CRYPTSETUP2] https://www.saout.de/pipermail/dm-crypt/2017-November/005745.html + +[DMC-CBC-ATTACK] https://www.jakoblell.com/blog/2013/12/22/practical-malleability-attack-against-cbc-en +crypted-luks-partitions/ + +[DM-INTEGRITY] https://www.kernel.org/doc/Documentation/device-mapper/dm-integrity.rst + +[DM-VERITY] https://www.kernel.org/doc/Documentation/device-mapper/verity.rst + +[FSCRYPT-POLICY2] https://www.spinics.net/lists/linux-ext4/msg58710.html + +[UBIFS-WP] http://www.linux-mtd.infradead.org/doc/ubifs_whitepaper.pdf diff --git a/Documentation/translations/zh_CN/filesystems/ubifs.rst b/Documentation/translations/zh_CN/filesystems/ubifs.rst new file mode 100644 index 00000000000000..d1873fc6a67c3e --- /dev/null +++ b/Documentation/translations/zh_CN/filesystems/ubifs.rst @@ -0,0 +1,114 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/filesystems/ubifs.rst + +:翻译: + + 邵明寅 Shao Mingyin + +:校译: + + 杨涛 yang tao + +============ +UBI 文件系统 +============ + +简介 +==== + +UBIFS 文件系统全称为 UBI 文件系统（UBI File System）。UBI 代表无序块镜 +像（Unsorted Block Images）。UBIFS 是一种闪存文件系统，这意味着它专为闪 +存设备设计。需要理解的是，UBIFS与 Linux 中任何传统文件系统（如 Ext2、 +XFS、JFS 等）完全不同。UBIFS 代表一类特殊的文件系统，它们工作在 MTD 设备 +而非块设备上。该类别的另一个 Linux 文件系统是 JFFS2。 + +为更清晰说明，以下是 MTD 设备与块设备的简要比较： + +1. MTD 设备代表闪存设备，由较大尺寸的擦除块组成，通常约 128KiB。块设备由 + 小块组成，通常 512 字节。 +2. MTD 设备支持 3 种主要操作：在擦除块内偏移位置读取、在擦除块内偏移位置写 + 入、以及擦除整个擦除块。块设备支持 2 种主要操作：读取整个块和写入整个块。 +3. 整个擦除块必须先擦除才能重写内容。块可直接重写。 +4. 擦除块在经历一定次数的擦写周期后会磨损，通常 SLC NAND 和 NOR 闪存为 + 100K-1G 次，MLC NAND 闪存为 1K-10K 次。块设备不具备磨损特性。 +5. 擦除块可能损坏（仅限 NAND 闪存），软件需处理此问题。硬盘上的块通常不会损 + 坏，因为硬件有坏块替换机制（至少现代 LBA 硬盘如此）。 + +这充分说明了 UBIFS 与传统文件系统的本质差异。 + +UBIFS 工作在 UBI 层之上。UBI 是一个独立的软件层（位于 drivers/mtd/ubi）， +本质上是卷管理和磨损均衡层。它提供称为 UBI 卷的高级抽象，比 MTD 设备更上层。 +UBI 设备的编程模型与 MTD 设备非常相似，仍由大容量擦除块组成，支持读/写/擦 +除操作，但 UBI 设备消除了磨损和坏块限制（上述列表的第 4 和第 5 项）。 + +某种意义上，UBIFS 是 JFFS2 文件系统的下一代产品，但它与 JFFS2 差异巨大且 +不兼容。主要区别如下： + +* JFFS2 工作在 MTD 设备之上，UBIFS 依赖于 UBI 并工作在 UBI 卷之上。 +* JFFS2 没有介质索引，需在挂载时构建索引，这要求全介质扫描。UBIFS 在闪存 + 介质上维护文件系统索引信息，无需全介质扫描，因此挂载速度远快于 JFFS2。 +* JFFS2 是直写（write-through）文件系统，而 UBIFS 支持回写 + （write-back），这使得 UBIFS 写入速度快得多。 + +与 JFFS2 类似，UBIFS 支持实时压缩，可将大量数据存入闪存。 + +与 JFFS2 类似，UBIFS 能容忍异常重启和断电。它不需要类似 fsck.ext2 的工 +具。UBIFS 会自动重放日志并从崩溃中恢复，确保闪存数据结构的一致性。 + +UBIFS 具有对数级扩展性（其使用的数据结构多为树形），因此挂载时间和内存消耗不 +像 JFFS2 那样线性依赖于闪存容量。这是因为 UBIFS 在闪存介质上维护文件系统 +索引。但 UBIFS 依赖于线性扩展的 UBI 层，因此整体 UBI/UBIFS 栈仍是线性扩 +展。尽管如此，UBIFS/UBI 的扩展性仍显著优于 JFFS2。 + +UBIFS 开发者认为，未来可开发同样具备对数级扩展性的 UBI2。UBI2 将支持与 +UBI 相同的 API，但二进制不兼容。因此 UBIFS 无需修改即可使用 UBI2。 + +挂载选项 +======== + +(*) 表示默认选项。 + +==================== ======================================================= +bulk_read 批量读取以利用闪存介质的顺序读取加速特性 +no_bulk_read (*) 禁用批量读取 +no_chk_data_crc (*) 跳过数据节点的 CRC 校验以提高读取性能。 仅在闪存 + 介质高度可靠时使用此选项。 此选项可能导致文件内容损坏无法被 + 察觉。 +chk_data_crc 强制校验数据节点的 CRC +compr=none 覆盖默认压缩器，设置为"none" +compr=lzo 覆盖默认压缩器，设置为"LZO" +compr=zlib 覆盖默认压缩器，设置为"zlib" +auth_key= 指定用于文件系统身份验证的密钥。 + 使用此选项将强制启用身份验证。 + 传入的密钥必须存在于内核密钥环中， 且类型必须是'logon' +auth_hash_name= 用于身份验证的哈希算法。同时用于哈希计算和 HMAC + 生成。典型值包括"sha256"或"sha512" +==================== ======================================================= + +快速使用指南 +============ + +挂载的 UBI 卷通过 "ubiX_Y" 或 "ubiX:NAME" 语法指定，其中 "X" 是 UBI +设备编号，"Y" 是 UBI 卷编号，"NAME" 是 UBI 卷名称。 + +将 UBI 设备 0 的卷 0 挂载到 /mnt/ubifs:: + + $ mount -t ubifs ubi0_0 /mnt/ubifs + +将 UBI 设备 0 的 "rootfs" 卷挂载到 /mnt/ubifs（"rootfs" 是卷名）:: + + $ mount -t ubifs ubi0:rootfs /mnt/ubifs + +以下是内核启动参数的示例，用于将 mtd0 附加到 UBI 并挂载 "rootfs" 卷： +ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs + +参考资料 +======== + +UBIFS 文档及常见问题解答/操作指南请访问 MTD 官网： + +- http://www.linux-mtd.infradead.org/doc/ubifs.html +- http://www.linux-mtd.infradead.org/faq/ubifs.html diff --git a/Documentation/translations/zh_CN/how-to.rst b/Documentation/translations/zh_CN/how-to.rst index ddd99c0f9b4d19..7ae5d876588856 100644 --- a/Documentation/translations/zh_CN/how-to.rst +++ b/Documentation/translations/zh_CN/how-to.rst @@ -64,7 +64,7 @@ Linux 发行版和简单地使用 Linux 命令行，那么可以迅速开始了 :: cd linux - ./scripts/sphinx-pre-install + ./tools/docs/sphinx-pre-install 以 Fedora 为例，它的输出是这样的:: @@ -437,7 +437,7 @@ git email 默认会抄送给您一份，所以您可以切换为审阅者的角 对于首次参与 Linux 内核中文文档翻译的新手，建议您在 linux 目录中运行以下命令： :: - ./script/checktransupdate.py -l zh_CN`` + tools/docs/checktransupdate.py -l zh_CN`` 该命令会列出需要翻译或更新的英文文档，结果同时保存在 checktransupdate.log 中。 diff --git a/Documentation/translations/zh_CN/kbuild/kbuild.rst b/Documentation/translations/zh_CN/kbuild/kbuild.rst index e5e2aebe1ebc84..57f5cf5b2cddb4 100644 --- a/Documentation/translations/zh_CN/kbuild/kbuild.rst +++ b/Documentation/translations/zh_CN/kbuild/kbuild.rst @@ -93,6 +93,16 @@ HOSTRUSTFLAGS ------------- 在构建主机程序时传递给 $(HOSTRUSTC) 的额外标志。 +PROCMACROLDFLAGS +---------------- +用于链接 Rust 过程宏的标志。由于过程宏是由 rustc 在构建时加载的， +因此必须以与当前使用的 rustc 工具链兼容的方式进行链接。 + +例如，当 rustc 使用的 C 库与用户希望用于主机程序的 C 库不同时， +此设置会非常有用。 + +如果未设置，则默认使用链接主机程序时传递的标志。 + HOSTLDFLAGS ----------- 链接主机程序时传递的额外选项。 @@ -135,12 +145,18 @@ KBUILD_OUTPUT 指定内核构建的输出目录。 在单独的构建目录中为预构建内核构建外部模块时，这个变量也可以指向内核输出目录。请注意， -这并不指定外部模块本身的输出目录。 +这并不指定外部模块本身的输出目录(使用 KBUILD_EXTMOD_OUTPUT 来达到这个目的)。 输出目录也可以使用 "O=..." 指定。 设置 "O=..." 优先于 KBUILD_OUTPUT。 +KBUILD_EXTMOD_OUTPUT +-------------------- +指定外部模块的输出目录 + +设置 "MO=..." 优先于 KBUILD_EXTMOD_OUTPUT. + KBUILD_EXTRA_WARN ----------------- 指定额外的构建检查。也可以通过在命令行传递 "W=..." 来设置相同的值。 @@ -290,8 +306,13 @@ IGNORE_DIRS KBUILD_BUILD_TIMESTAMP ---------------------- 将该环境变量设置为日期字符串，可以覆盖在 UTS_VERSION 定义中使用的时间戳 -（运行内核时的 uname -v）。该值必须是一个可以传递给 date -d 的字符串。默认值是 -内核构建某个时刻的 date 命令输出。 +(运行内核时的 uname -v) 。该值必须是一个可以传递给 date -d 的字符串。例如:: + + $ KBUILD_BUILD_TIMESTAMP="Mon Oct 13 00:00:00 UTC 2025" make + +默认值是内核构建某个时刻的 date 命令输出。如果提供该时戳，它还用于任何 initramfs 归 +档文件中的 mtime 字段。 Initramfs mtimes 是 32 位的，因此早于 Unix 纪元 1970 年，或 +晚于协调世界时 (UTC) 2106 年 2 月 7 日 6 时 28 分 15 秒的日期是无效的。 KBUILD_BUILD_USER, KBUILD_BUILD_HOST ------------------------------------ diff --git a/Documentation/translations/zh_CN/mm/active_mm.rst b/Documentation/translations/zh_CN/mm/active_mm.rst index b3352668c4c850..9496a0bb7d0705 100644 --- a/Documentation/translations/zh_CN/mm/active_mm.rst +++ b/Documentation/translations/zh_CN/mm/active_mm.rst @@ -87,4 +87,4 @@ Active MM 最丑陋的之一--不像其他架构的MM和寄存器状态是分开的，alpha的PALcode将两者 连接起来，你需要同时切换两者）。 - (文档来源 http://marc.info/?l=linux-kernel&m=93337278602211&w=2) + (文档来源 https://lore.kernel.org/lkml/Pine.LNX.4.10.9907301410280.752-100000@penguin.transmeta.com/) diff --git a/Documentation/translations/zh_CN/networking/generic-hdlc.rst b/Documentation/translations/zh_CN/networking/generic-hdlc.rst new file mode 100644 index 00000000000000..9e493dc9721ef5 --- /dev/null +++ b/Documentation/translations/zh_CN/networking/generic-hdlc.rst @@ -0,0 +1,176 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/networking/generic-hdlc.rst + +:翻译: + + 孙渔喜 Sun yuxi + +========== +通用HDLC层 +========== + +Krzysztof Halasa + + +通用HDLC层当前支持以下协议: + +1. 帧中继（支持ANSI、CCITT、Cisco及无LMI模式） + + - 常规（路由）接口和以太网桥接（以太网设备仿真）接口 + 可共享同一条PVC。 + - 支持ARP（内核暂不支持InARP，但可通过实验性用户空间守护程序实现， + 下载地址：http://www.kernel.org/pub/linux/utils/net/hdlc/）。 + +2. 原始HDLC —— 支持IP（IPv4）接口或以太网设备仿真 +3. Cisco HDLC +4. PPP +5. X.25（使用X.25协议栈） + +通用HDLC仅作为协议驱动 - 必须配合具体硬件的底层驱动 +才能运行。 + +以太网设备仿真（使用HDLC或帧中继PVC）兼容IEEE 802.1Q（VLAN）和 +802.1D（以太网桥接）。 + + +请确保已加载 hdlc.o 和硬件驱动程序。系统将为每个WAN端口创建一个 +"hdlc"网络设备（如hdlc0等）。您需要使用"sethdlc"工具，可从以下 +地址获取： + + http://www.kernel.org/pub/linux/utils/net/hdlc/ + +编译 sethdlc.c 工具:: + + gcc -O2 -Wall -o sethdlc sethdlc.c + +请确保使用与您内核版本匹配的 sethdlc 工具。 + +使用 sethdlc 工具设置物理接口、时钟频率、HDLC 模式， +若使用帧中继还需添加所需的 PVC。 +通常您需要执行类似以下命令:: + + sethdlc hdlc0 clock int rate 128000 + sethdlc hdlc0 cisco interval 10 timeout 25 + +或:: + + sethdlc hdlc0 rs232 clock ext + sethdlc hdlc0 fr lmi ansi + sethdlc hdlc0 create 99 + ifconfig hdlc0 up + ifconfig pvc0 localIP pointopoint remoteIP + +在帧中继模式下，请先启用主hdlc设备（不分配IP地址），再 +使用pvc设备。 + + +接口设置选项： + +* v35 | rs232 | x21 | t1 | e1 + - 当网卡支持软件可选接口时，可为指定端口设置物理接口 + loopback + - 启用硬件环回（仅用于测试） +* clock ext + - RX与TX时钟均使用外部时钟源 +* clock int + - RX与TX时钟均使用内部时钟源 +* clock txint + - RX时钟使用外部时钟源，TX时钟使用内部时钟源 +* clock txfromrx + - RX时钟使用外部时钟源，TX时钟从RX时钟派生 +* rate + - 设置时钟速率（仅适用于"int"或"txint"时钟模式） + + +设置协议选项： + +* hdlc - 设置原始HDLC模式（仅支持IP协议） + + nrz / nrzi / fm-mark / fm-space / manchester - 传输编码选项 + + no-parity / crc16 / crc16-pr0 (预设零值的CRC16) / crc32-itu + + crc16-itu (使用ITU-T多项式的CRC16) / crc16-itu-pr0 - 校验方式选项 + +* hdlc-eth - 使用HDLC进行以太网设备仿真. 校验和编码方式同上 + as above. + +* cisco - 设置Cisco HDLC模式（支持IP、IPv6和IPX协议） + + interval - 保活数据包发送间隔（秒） + + timeout - 未收到保活数据包的超时时间（秒），超过此时长将判定 + 链路断开 + +* ppp - 设置同步PPP模式 + +* x25 - 设置X.25模式 + +* fr - 帧中继模式 + + lmi ansi / ccitt / cisco / none - LMI(链路管理)类型 + + dce - 将帧中继设置为DCE（网络侧）LMI模式（默认为DTE用户侧）。 + + 此设置与时钟无关！ + + - t391 - 链路完整性验证轮询定时器（秒）- 用户侧 + - t392 - 轮询验证定时器（秒）- 网络侧 + - n391 - 全状态轮询计数器 - 用户侧 + - n392 - 错误阈值 - 用户侧和网络侧共用 + - n393 - 监控事件计数 - 用户侧和网络侧共用 + +帧中继专用命令: + +* create n | delete n - 添加/删除DLCI编号为n的PVC接口。 + 新创建的接口将命名为pvc0、pvc1等。 + +* create ether n | delete ether n - 添加/删除用于以太网 + 桥接帧的设备设备将命名为pvceth0、pvceth1等。 + + + + +板卡特定问题 +------------ + +n2.o 和 c101.o 驱动模块需要参数才能工作:: + + insmod n2 hw=io,irq,ram,ports[:io,irq,...] + +示例:: + + insmod n2 hw=0x300,10,0xD0000,01 + +或:: + + insmod c101 hw=irq,ram[:irq,...] + +示例:: + + insmod c101 hw=9,0xdc000 + +若直接编译进内核，这些驱动需要通过内核(命令行)参数配置:: + + n2.hw=io,irq,ram,ports:... + +或:: + + c101.hw=irq,ram:... + + + +若您的N2、C101或PLX200SYN板卡出现问题，可通过"private" +命令查看端口数据包描述符环（显示在内核日志中） + + sethdlc hdlc0 private + +硬件驱动需使用#define DEBUG_RINGS编译选项构建。 +在提交错误报告时附上这些信息将很有帮助。如在使用过程中遇 +到任何问题，请随时告知。 + +获取补丁和其他信息，请访问： +. \ No newline at end of file diff --git a/Documentation/translations/zh_CN/networking/index.rst b/Documentation/translations/zh_CN/networking/index.rst index bb0edcffd1445d..c276c0993c51c8 100644 --- a/Documentation/translations/zh_CN/networking/index.rst +++ b/Documentation/translations/zh_CN/networking/index.rst @@ -27,6 +27,9 @@ xfrm_proc netmem alias + mptcp-sysctl + generic-hdlc + timestamping Todolist: @@ -76,7 +79,6 @@ Todolist: * eql * fib_trie * filter -* generic-hdlc * generic_netlink * netlink_spec/index * gen_stats @@ -96,7 +98,6 @@ Todolist: * mctp * mpls-sysctl * mptcp -* mptcp-sysctl * multiqueue * multi-pf-netdev * net_cachelines/index @@ -126,7 +127,6 @@ Todolist: * sctp * secid * seg6-sysctl -* skbuff * smc-sysctl * sriov * statistics @@ -138,7 +138,6 @@ Todolist: * tcp_ao * tcp-thin * team -* timestamping * tipc * tproxy * tuntap diff --git a/Documentation/translations/zh_CN/networking/mptcp-sysctl.rst b/Documentation/translations/zh_CN/networking/mptcp-sysctl.rst new file mode 100644 index 00000000000000..0b1b9ed7c647a4 --- /dev/null +++ b/Documentation/translations/zh_CN/networking/mptcp-sysctl.rst @@ -0,0 +1,139 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/networking/mptcp-sysctl.rst + +:翻译: + + 孙渔喜 Sun yuxi + +================ +MPTCP Sysfs 变量 +================ + +/proc/sys/net/mptcp/* Variables +=============================== + +add_addr_timeout - INTEGER (秒) + 设置ADD_ADDR控制消息的重传超时时间。当MPTCP对端未确认 + 先前的ADD_ADDR消息时，将在该超时时间后重新发送。 + + 默认值与TCP_RTO_MAX相同。此为每个命名空间的sysctl参数。 + + 默认值：120 + +allow_join_initial_addr_port - BOOLEAN + 控制是否允许对端向初始子流使用的IP地址和端口号发送加入 + 请求（1表示允许）。此参数会设置连接时发送给对端的标志位， + 并决定是否接受此类加入请求。 + + 通过ADD_ADDR通告的地址不受此参数影响。 + + 此为每个命名空间的sysctl参数。 + + 默认值：1 + +available_path_managers - STRING + 显示已注册的可用路径管理器选项。可能有更多路径管理器可用 + 但尚未加载。 + +available_schedulers - STRING + 显示已注册的可用调度器选项。可能有更多数据包调度器可用 + 但尚未加载。 + +blackhole_timeout - INTEGER (秒) + 当发生MPTCP防火墙黑洞问题时，初始禁用活跃MPTCP套接字上MPTCP + 功能的时间（秒）。如果在重新启用MPTCP后立即检测到更多黑洞问题， + 此时间段将呈指数增长；当黑洞问题消失时，将重置为初始值。 + + 设置为0可禁用黑洞检测功能。此为每个命名空间的sysctl参数。 + + 默认值：3600 + +checksum_enabled - BOOLEAN + 控制是否启用DSS校验和功能。 + + 当值为非零时可启用DSS校验和。此为每个命名空间的sysctl参数。 + + 默认值：0 + +close_timeout - INTEGER (seconds) + 设置"先断后连"超时时间：在未调用close或shutdown系统调用时， + MPTCP套接字将在最后一个子流移除后保持当前状态达到该时长，才 + 会转为TCP_CLOSE状态。 + + 默认值与TCP_TIMEWAIT_LEN相同。此为每个命名空间的sysctl参数。 + + 默认值：60 + +enabled - BOOLEAN + 控制是否允许创建MPTCP套接字。 + + 当值为1时允许创建MPTCP套接字。此为每个命名空间的sysctl参数。 + + 默认值：1（启用） + +path_manager - STRING + 设置用于每个新MPTCP套接字的默认路径管理器名称。内核路径管理将 + 根据通过MPTCP netlink API配置的每个命名空间值来控制子流连接 + 和地址通告。用户空间路径管理将每个MPTCP连接的子流连接决策和地 + 址通告交由特权用户空间程序控制，代价是需要更多netlink流量来 + 传播所有相关事件和命令。 + + 此为每个命名空间的sysctl参数。 + + * "kernel" - 内核路径管理器 + * "userspace" - 用户空间路径管理器 + + 默认值："kernel" + +pm_type - INTEGER + 设置用于每个新MPTCP套接字的默认路径管理器类型。内核路径管理将 + 根据通过MPTCP netlink API配置的每个命名空间值来控制子流连接 + 和地址通告。用户空间路径管理将每个MPTCP连接的子流连接决策和地 + 址通告交由特权用户空间程序控制，代价是需要更多netlink流量来 + 传播所有相关事件和命令。 + + 此为每个命名空间的sysctl参数。 + + 自v6.15起已弃用，请改用path_manager参数。 + + * 0 - 内核路径管理器 + * 1 - 用户空间路径管理器 + + 默认值：0 + +scheduler - STRING + 选择所需的调度器类型。 + + 支持选择不同的数据包调度器。此为每个命名空间的sysctl参数。 + + 默认值："default" + +stale_loss_cnt - INTEGER + 用于判定子流失效（stale）的MPTCP层重传间隔次数阈值。当指定 + 子流在连续多个重传间隔内既无数据传输又有待处理数据时，将被标 + 记为失效状态。失效子流将被数据包调度器忽略。 + 设置较低的stale_loss_cnt值可实现快速主备切换，较高的值则能 + 最大化边缘场景（如高误码率链路或对端暂停数据处理等异常情况） + 的链路利用率。 + + 此为每个命名空间的sysctl参数。 + + 默认值：4 + +syn_retrans_before_tcp_fallback - INTEGER + 在回退到 TCP（即丢弃 MPTCP 选项）之前，SYN + MP_CAPABLE + 报文的重传次数。换句话说，如果所有报文在传输过程中都被丢弃， + 那么将会： + + * 首次SYN携带MPTCP支持选项 + * 按本参数值重传携带MPTCP选项的SYN包 + * 后续重传将不再携带MPTCP支持选项 + + 0 表示首次重传即丢弃MPTCP选项。 + >=128 表示所有SYN重传均保留MPTCP选项设置过低的值可能增加 + MPTCP黑洞误判几率。此为每个命名空间的sysctl参数。 + + 默认值：2 diff --git a/Documentation/translations/zh_CN/networking/timestamping.rst b/Documentation/translations/zh_CN/networking/timestamping.rst new file mode 100644 index 00000000000000..4593f53ad09aad --- /dev/null +++ b/Documentation/translations/zh_CN/networking/timestamping.rst @@ -0,0 +1,674 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/networking/timestamping.rst + +:翻译: + + 王亚鑫 Wang Yaxin + +====== +时间戳 +====== + + +1. 控制接口 +=========== + +接收网络数据包时间戳的接口包括： + +SO_TIMESTAMP + 为每个传入数据包生成（不一定是单调的）系统时间时间戳。通过 recvmsg() + 在控制消息中以微秒分辨率报告时间戳。 + SO_TIMESTAMP 根据架构类型和 libc 的 lib 中的 time_t 表示方式定义为 + SO_TIMESTAMP_NEW 或 SO_TIMESTAMP_OLD。 + SO_TIMESTAMP_OLD 和 SO_TIMESTAMP_NEW 的控制消息格式分别为 + struct __kernel_old_timeval 和 struct __kernel_sock_timeval。 + +SO_TIMESTAMPNS + 与 SO_TIMESTAMP 相同的时间戳机制，但以 struct timespec 格式报告时间戳， + 纳秒分辨率。 + SO_TIMESTAMPNS 根据架构类型和 libc 的 time_t 表示方式定义为 + SO_TIMESTAMPNS_NEW 或 SO_TIMESTAMPNS_OLD。 + 控制消息格式对于 SO_TIMESTAMPNS_OLD 为 struct timespec， + 对于 SO_TIMESTAMPNS_NEW 为 struct __kernel_timespec。 + +IP_MULTICAST_LOOP + SO_TIMESTAMP[NS] + 仅用于多播：通过读取回环数据包接收时间戳，获得近似的传输时间戳。 + +SO_TIMESTAMPING + 在接收、传输或两者时生成时间戳。支持多个时间戳源，包括硬件。 + 支持为流套接字生成时间戳。 + + +1.1 SO_TIMESTAMP（也包括 SO_TIMESTAMP_OLD 和 SO_TIMESTAMP_NEW） +--------------------------------------------------------------- + +此套接字选项在接收路径上启用数据报的时间戳。由于目标套接字（如果有） +在网络栈早期未知，因此必须为所有数据包启用此功能。所有早期接收的时间 +戳选项也是如此。 + +有关接口详细信息，请参阅 `man 7 socket`。 + +始终使用 SO_TIMESTAMP_NEW 时间戳以获得 struct __kernel_sock_timeval +格式的时间戳。 + +如果时间在 2038 年后，SO_TIMESTAMP_OLD 在 32 位机器上将返回错误的时间戳。 + +1.2 SO_TIMESTAMPNS（也包括 SO_TIMESTAMPNS_OLD 和 SO_TIMESTAMPNS_NEW） +--------------------------------------------------------------------- + +此选项与 SO_TIMESTAMP 相同，但返回数据类型有所不同。其 struct timespec +能达到比 SO_TIMESTAMP 的 timeval（毫秒）更高的分辨率（纳秒）时间戳。 + +始终使用 SO_TIMESTAMPNS_NEW 时间戳获得 struct __kernel_timespec 格式 +的时间戳。 + +如果时间在 2038 年后，SO_TIMESTAMPNS_OLD 在 32 位机器上将返回错误的时间戳。 + +1.3 SO_TIMESTAMPING（也包括 SO_TIMESTAMPING_OLD 和 SO_TIMESTAMPING_NEW） +------------------------------------------------------------------------ + +支持多种类型的时间戳请求。因此，此套接字选项接受标志位图，而不是布尔值。在:: + + err = setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, &val, sizeof(val)); + +val 是一个整数，设置了以下任何位。设置其他位将返回 EINVAL 且不更改当前状态。 + +这个套接字选项配置以下几个方面的时间戳生成： +为单个 sk_buff 结构体生成时间戳（1.3.1）； +将时间戳报告到套接字的错误队列（1.3.2）； +配置相关选项（1.3.3）； +也可以通过 cmsg 为单个 sendmsg 调用启用时间戳生成（1.3.4）。 + +1.3.1 时间戳生成 +^^^^^^^^^^^^^^^^ + +某些位是向协议栈请求尝试生成时间戳。它们的任何组合都是有效的。对这些位的更改适 +用于新创建的数据包，而不是已经在协议栈中的数据包。因此，可以通过在两个 setsockopt +调用之间嵌入 send() 调用来选择性地为数据包子集请求时间戳（例如，用于采样）， +一个用于启用时间戳生成，一个用于禁用它。时间戳也可能由于特定套接字请求之外的原 +因而生成，例如在当系统范围内启用接收时间戳时，如前所述。 + +SOF_TIMESTAMPING_RX_HARDWARE: + 请求由网络适配器生成的接收时间戳。 + +SOF_TIMESTAMPING_RX_SOFTWARE: + 当数据进入内核时请求接收时间戳。这些时间戳在设备驱动程序将数据包交给内核接收 + 协议栈后生成。 + +SOF_TIMESTAMPING_TX_HARDWARE: + 请求由网络适配器生成的传输时间戳。此标志可以通过套接字选项和控制消息启用。 + +SOF_TIMESTAMPING_TX_SOFTWARE: + 当数据离开内核时请求传输（TX）时间戳。这些时间戳由设备驱动程序生成，并且尽 + 可能贴近网络接口发送点，但始终在内核将数据包传递给网络接口之前生成。因此， + 它们需要驱动程序支持，且可能并非所有设备都可用。此标志可通过套接字选项和 + 控制消息两种方式启用。 + +SOF_TIMESTAMPING_TX_SCHED: + 在进入数据包调度器之前请求传输时间戳。内核传输延迟（如果很长）通常由排队 + 延迟主导。此时间戳与在 SOF_TIMESTAMPING_TX_SOFTWARE 处获取的时间戳之 + 间的差异将暴露此延迟，并且与协议处理无关。协议处理中产生的延迟（如果有） + 可以通过从 send() 之前立即获取的用户空间时间戳中减去此时间戳来计算。在 + 具有虚拟设备的机器上，传输的数据包通过多个设备和多个数据包调度器，在每层 + 生成时间戳。这允许对排队延迟进行细粒度测量。此标志可以通过套接字选项和控 + 制消息启用。 + +SOF_TIMESTAMPING_TX_ACK: + 请求在发送缓冲区中的所有数据都已得到确认时生成传输（TX）时间戳。此选项 + 仅适用于可靠协议，目前仅在TCP协议中实现。对于该协议，它可能会过度报告 + 测量结果，因为时间戳是在send()调用时缓冲区中的所有数据（包括该缓冲区） + 都被确认时生成的，即累积确认。该机制会忽略选择确认（SACK）和前向确认 + （FACK）。此标志可通过套接字选项和控制消息两种方式启用。 + +SOF_TIMESTAMPING_TX_COMPLETION: + 在数据包传输完成时请求传输时间戳。完成时间戳由内核在从硬件接收数据包完成 + 报告时生成。硬件可能一次报告多个数据包，完成时间戳反映报告的时序而不是实 + 际传输时间。此标志可以通过套接字选项和控制消息启用。 + + +1.3.2 时间戳报告 +^^^^^^^^^^^^^^^^ + +其他三个位控制将在生成的控制消息中报告哪些时间戳。对这些位的更改在协议栈中 +的时间戳报告位置立即生效。仅当数据包设置了相关的时间戳生成请求时，才会报告 +其时间戳。 + +SOF_TIMESTAMPING_SOFTWARE: + 在可用时报告任何软件时间戳。 + +SOF_TIMESTAMPING_SYS_HARDWARE: + 此选项已被弃用和忽略。 + +SOF_TIMESTAMPING_RAW_HARDWARE: + 在可用时报告由 SOF_TIMESTAMPING_TX_HARDWARE 或 SOF_TIMESTAMPING_RX_HARDWARE + 生成的硬件时间戳。 + + +1.3.3 时间戳选项 +^^^^^^^^^^^^^^^^ + +接口支持以下选项 + +SOF_TIMESTAMPING_OPT_ID: + 每个数据包生成一个唯一标识符。一个进程可以同时存在多个未完成的时间戳请求。 + 数据包在传输路径中可能会发生重排序（例如在数据包调度器中）。在这种情况下， + 时间戳会以与原始send()调用不同的顺序排队到错误队列中。如此一来，仅根据 + 时间戳顺序或 payload（有效载荷）检查，并不总能将时间戳与原始send()调用 + 唯一匹配。 + + 此选项在 send() 时将每个数据包与唯一标识符关联，并与时间戳一起返回。 + 标识符源自每个套接字的 u32 计数器（会回绕）。对于数据报套接字，计数器 + 随每个发送的数据包递增。对于流套接字，它随每个字节递增。对于流套接字， + 还要设置 SOF_TIMESTAMPING_OPT_ID_TCP，请参阅下面的部分。 + + 计数器从零开始。在首次启用套接字选项时初始化。在禁用后再重新启用选项时 + 重置。重置计数器不会更改系统中现有数据包的标识符。 + + 此选项仅针对传输时间戳实现。在这种情况下，时间戳总是与sock_extended_err + 结构体一起回环。该选项会修改ee_data字段，以传递一个在该套接字所有同时 + 存在的未完成时间戳请求中唯一的 ID。 + + 进程可以通过控制消息SCM_TS_OPT_ID（TCP 套接字不支持）传递特定 ID， + 从而选择性地覆盖默认生成的 ID，示例如下:: + + struct msghdr *msg; + ... + cmsg = CMSG_FIRSTHDR(msg); + cmsg->cmsg_level = SOL_SOCKET; + cmsg->cmsg_type = SCM_TS_OPT_ID; + cmsg->cmsg_len = CMSG_LEN(sizeof(__u32)); + *((__u32 *) CMSG_DATA(cmsg)) = opt_id; + err = sendmsg(fd, msg, 0); + + +SOF_TIMESTAMPING_OPT_ID_TCP: + 与 SOF_TIMESTAMPING_OPT_ID 一起传递给新的 TCP 时间戳应用程序。 + SOF_TIMESTAMPING_OPT_ID 定义了流套接字计数器的增量，但其起始点 + 并不完全显而易见。此选项修复了这一点。 + + 对于流套接字，如果设置了 SOF_TIMESTAMPING_OPT_ID，则此选项应始终 + 设置。在数据报套接字上，选项没有效果。 + + 一个合理的期望是系统调用后计数器重置为零，因此后续写入 N 字节将生成 + 计数器为 N-1 的时间戳。SOF_TIMESTAMPING_OPT_ID_TCP 在所有条件下 + 都实现了此行为。 + + SOF_TIMESTAMPING_OPT_ID 不带修饰符时通常报告相同，特别是在套接字选项 + 在无数据传输时设置时。如果正在传输数据，它可能与输出队列的长度（SIOCOUTQ） + 偏差。 + + 差异是由于基于 snd_una 与 write_seq 的。snd_una 是 peer 确认的 stream + 的偏移量。这取决于外部因素，例如网络 RTT。write_seq 是进程写入的最后一个 + 字节。此偏移量不受外部输入影响。 + + 差异细微，在套接字选项初始化时配置时不易察觉，但 SOF_TIMESTAMPING_OPT_ID_TCP + 行为在任何时候都更稳健。 + +SOF_TIMESTAMPING_OPT_CMSG: + 支持所有时间戳数据包的 recv() cmsg。控制消息已无条件地在所有接收时间戳数据包 + 和 IPv6 数据包上支持，以及在发送时间戳数据包的 IPv4 数据包上支持。此选项扩展 + 了它们以在发送时间戳数据包的 IPv4 数据包上支持。一个用例是启用 socket 选项 + IP_PKTINFO 以关联数据包与其出口设备，通过启用 socket 选项 IP_PKTINFO 同时。 + + +SOF_TIMESTAMPING_OPT_TSONLY: + 仅适用于传输时间戳。使内核返回一个 cmsg 与一个空数据包一起，而不是与原 + 始数据包一起。这减少了套接字接收预算（SO_RCVBUF）中收取的内存量，并即使 + 在 sysctl net.core.tstamp_allow_data 为 0 时也提供时间戳。此选项禁用 + SOF_TIMESTAMPING_OPT_CMSG。 + +SOF_TIMESTAMPING_OPT_STATS: + 与传输时间戳一起获取的选项性统计信息。它必须与 SOF_TIMESTAMPING_OPT_TSONLY + 一起使用。当传输时间戳可用时，统计信息可在类型为 SCM_TIMESTAMPING_OPT_STATS + 的单独控制消息中获取，作为 TLV（struct nlattr）类型的列表。这些统计信息允许应 + 用程序将各种传输层统计信息与传输时间戳关联，例如某个数据块被 peer 的接收窗口限 + 制了多长时间。 + +SOF_TIMESTAMPING_OPT_PKTINFO: + 启用 SCM_TIMESTAMPING_PKTINFO 控制消息以接收带有硬件时间戳的数据包。 + 消息包含 struct scm_ts_pktinfo，它提供接收数据包的实际接口索引和层 2 长度。 + 只有在 CONFIG_NET_RX_BUSY_POLL 启用且驱动程序使用 NAPI 时，才会返回非零的 + 有效接口索引。该结构还包含另外两个字段，但它们是保留字段且未定义。 + +SOF_TIMESTAMPING_OPT_TX_SWHW: + 请求在 SOF_TIMESTAMPING_TX_HARDWARE 和 SOF_TIMESTAMPING_TX_SOFTWARE + 同时启用时，为传出数据包生成硬件和软件时间戳。如果同时生成两个时间戳，两个单 + 独的消息将回环到套接字的错误队列，每个消息仅包含一个时间戳。 + +SOF_TIMESTAMPING_OPT_RX_FILTER: + 过滤掉虚假接收时间戳：仅当匹配的时间戳生成标志已启用时才报告接收时间戳。 + + 接收时间戳在入口路径中生成较早，在数据包的目的套接字确定之前。如果任何套接 + 字启用接收时间戳，所有套接字的数据包将接收时间戳数据包。包括那些请求时间戳 + 报告与 SOF_TIMESTAMPING_SOFTWARE 和/或 SOF_TIMESTAMPING_RAW_HARDWARE， + 但未请求接收时间戳生成。这可能发生在仅请求发送时间戳时。 + + 接收虚假时间戳通常是无害的。进程可以忽略意外的非零值。但它使行为在其他套接 + 字上微妙地依赖。此标志隔离套接字以获得更确定的行为。 + +新应用程序鼓励传递 SOF_TIMESTAMPING_OPT_ID 以区分时间戳并传递 +SOF_TIMESTAMPING_OPT_TSONLY 以操作，而不管 sysctl net.core.tstamp_allow_data +的设置。 + +例外情况是当进程需要额外的 cmsg 数据时，例如 SOL_IP/IP_PKTINFO 以检测出 +口网络接口。然后传递选项 SOF_TIMESTAMPING_OPT_CMSG。此选项依赖于访问原 +始数据包的内容，因此不能与 SOF_TIMESTAMPING_OPT_TSONLY 组合。 + + +1.3.4. 通过控制消息启用时间戳 +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +除了套接字选项外，时间戳生成还可以通过 cmsg 按写入请求，仅适用于 +SOF_TIMESTAMPING_TX_*（见第 1.3.1 节）。使用此功能，应用程序可以无需启用和 +禁用时间戳即可采样每个 sendmsg() 的时间戳:: + + struct msghdr *msg; + ... + cmsg = CMSG_FIRSTHDR(msg); + cmsg->cmsg_level = SOL_SOCKET; + cmsg->cmsg_type = SO_TIMESTAMPING; + cmsg->cmsg_len = CMSG_LEN(sizeof(__u32)); + *((__u32 *) CMSG_DATA(cmsg)) = SOF_TIMESTAMPING_TX_SCHED | + SOF_TIMESTAMPING_TX_SOFTWARE | + SOF_TIMESTAMPING_TX_ACK; + err = sendmsg(fd, msg, 0); + +通过 cmsg 设置的 SOF_TIMESTAMPING_TX_* 标志将覆盖通过 setsockopt 设置的 +SOF_TIMESTAMPING_TX_* 标志。 + +此外，应用程序仍然需要通过 setsockopt 启用时间戳报告以接收时间戳:: + + __u32 val = SOF_TIMESTAMPING_SOFTWARE | + SOF_TIMESTAMPING_OPT_ID /* 或任何其他标志 */; + err = setsockopt(fd, SOL_SOCKET, SO_TIMESTAMPING, &val, sizeof(val)); + + +1.4 字节流时间戳 +---------------- + +SO_TIMESTAMPING 接口支持字节流的时间戳。每个请求解释为请求当整个缓冲区内容 +通过时间戳点时。也就是说，对于流选项 SOF_TIMESTAMPING_TX_SOFTWARE 将记录 +当所有字节都到达设备驱动程序时，无论数据被转换成多少个数据包。 + +一般来说，字节流没有自然分隔符，因此将时间戳与数据相关联是非平凡的。字节范围 +可能跨段，任何段可能合并（可能合并先前分段缓冲区关联的独立 send() 调用）。段 +可以重新排序，同一字节范围可以在多个段中并存，对于实现重传的协议。 + +所有时间戳必须实现相同的语义，否则它们是不可比较的。以不同于简单情况（缓冲区 +到 skb 的 1:1 映射）的方式处理“罕见”角落情况是不够的，因为性能调试通常需要 +关注这些异常。 + +在实践中，时间戳可以与字节流段一致地关联，如果时间戳语义和测量时序的选择正确。 +此挑战与决定 IP 分片策略没有不同。在那里，定义是仅对第一个分片进行时间戳。对 +于字节流，我们选择仅在所有字节通过某个点时生成时间戳。SOF_TIMESTAMPING_TX_ACK +定义的实现和推理是容易的。一个需要考虑 SACK 的实现会更复杂，因为可能存在传输 +空洞和乱序到达。 + +在主机上，TCP 也可以通过 Nagle、cork、autocork、分段和 GSO 打破简单的 1:1 +缓冲区到 skbuff 映射。实现确保在所有情况下都正确，通过跟踪每个 send() 传递 +给send() 的最后一个字节，即使它在 skbuff 扩展或合并操作后不再是最后一个字 +节。它存储相关的序列号在 skb_shinfo(skb)->tskey。因为一个 skbuff 只有一 +个这样的字段，所以只能生成一个时间戳。 + +在罕见情况下，如果两个请求折叠到同一个 skb，则时间戳请求可能会被错过。进程可 +以通过始终在请求之间刷新 TCP 栈来检测此情况，例如启用 TCP_NODELAY 和禁用 +TCP_CORK和 autocork。在 linux-4.7 之后，更好的预防合并方法是使用 MSG_EOR +标志在sendmsg()时。 + +这些预防措施确保时间戳仅在所有字节通过时间戳点时生成，假设网络栈本身不会重新 +排序段。栈确实试图避免重新排序。唯一的例外是管理员控制：可以构造一个数据包调 +度器配置，将来自同一流的不同段延迟不同。这种设置通常不常见。 + + +2 数据接口 +========== + +时间戳通过 recvmsg() 的辅助数据功能读取。请参阅 `man 3 cmsg` 了解此接口的 +详细信息。套接字手册页面 (`man 7 socket`) 描述了如何检索SO_TIMESTAMP 和 +SO_TIMESTAMPNS 生成的数据包时间戳。 + + +2.1 SCM_TIMESTAMPING 记录 +------------------------- + +这些时间戳在 cmsg_level SOL_SOCKET、cmsg_type SCM_TIMESTAMPING 和类型为 + +对于 SO_TIMESTAMPING_OLD:: + + struct scm_timestamping { + struct timespec ts[3]; + }; + +对于 SO_TIMESTAMPING_NEW:: + + struct scm_timestamping64 { + struct __kernel_timespec ts[3]; + +始终使用 SO_TIMESTAMPING_NEW 时间戳以始终获得 struct scm_timestamping64 +格式的时间戳。 + +SO_TIMESTAMPING_OLD 在 32 位机器上 2038 年后返回错误的时间戳。 + +该结构可以返回最多三个时间戳。这是一个遗留功能。任何时候至少有一个字 +段不为零。大多数时间戳都通过 ts[0] 传递。硬件时间戳通过 ts[2] 传递。 + +ts[1] 以前用于存储硬件时间戳转换为系统时间。相反，将硬件时钟设备直接 +暴露为HW PTP时钟源，以允许用户空间进行时间转换，并可选地与用户空间 +PTP 堆栈（如linuxptp）同步系统时间。对于 PTP 时钟 API，请参阅 +Documentation/driver-api/ptp.rst。 + +注意，如果同时启用了 SO_TIMESTAMP 或 SO_TIMESTAMPNS 与 +SO_TIMESTAMPING 使用 SOF_TIMESTAMPING_SOFTWARE，在 recvmsg() +调用时会生成一个虚假的软件时间戳，并传递给 ts[0] 当真实软件时间戳缺 +失时。这也发生在硬件传输时间戳上。 + +2.1.1 传输时间戳与 MSG_ERRQUEUE +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +对于传输时间戳，传出数据包回环到套接字的错误队列，并附加发送时间戳（s）。 +进程通过调用带有 MSG_ERRQUEUE 标志的 recvmsg() 接收时间戳，并传递 +一个足够大的 msg_control缓冲区以接收相关的元数据结构。recvmsg 调用 +返回原始传出数据包，并附加两个辅助消息。 + +一个 cm_level SOL_IP(V6) 和 cm_type IP(V6)_RECVERR 嵌入一个 +struct sock_extended_err这定义了错误类型。对于时间戳，ee_errno +字段是 ENOMSG。另一个辅助消息将具有 cm_level SOL_SOCKET 和 cm_type +SCM_TIMESTAMPING。这嵌入了 struct scm_timestamping。 + + +2.1.1.2 时间戳类型 +~~~~~~~~~~~~~~~~~~ + +三个 struct timespec 的语义由 struct sock_extended_err 中的 +ee_info 字段定义。它包含一个类型 SCM_TSTAMP_* 来定义实际传递给 +scm_timestamping 的时间戳。 + +SCM_TSTAMP_* 类型与之前讨论的 SOF_TIMESTAMPING_* 控制字段完全 +匹配，只有一个例外对于遗留原因，SCM_TSTAMP_SND 等于零，可以设置为 +SOF_TIMESTAMPING_TX_HARDWARE 和 SOF_TIMESTAMPING_TX_SOFTWARE。 +它是第一个，如果 ts[2] 不为零，否则是第二个，在这种情况下，时间戳存 +储在ts[0] 中。 + + +2.1.1.3 分片 +~~~~~~~~~~~~ + +传出数据报分片很少见，但可能发生，例如通过显式禁用 PMTU 发现。如果 +传出数据包被分片，则仅对第一个分片进行时间戳，并返回给发送套接字。 + + +2.1.1.4 数据包负载 +~~~~~~~~~~~~~~~~~~ + +调用应用程序通常不关心接收它传递给堆栈的整个数据包负载：套接字错误队 +列机制仅是一种将时间戳附加到其上的方法。在这种情况下，应用程序可以选 +择读取较小的数据报，甚至长度为 0。负载相应地被截断。直到进程调用 +recvmsg() 到错误队列，然而，整个数据包仍在队列中，占用 SO_RCVBUF 预算。 + + +2.1.1.5 阻塞读取 +~~~~~~~~~~~~~~~~ + +从错误队列读取始终是非阻塞操作。要阻塞等待时间戳，请使用 poll 或 +select。poll() 将在 pollfd.revents 中返回 POLLERR，如果错误队列 +中有数据。没有必要在 pollfd.events中传递此标志。此标志在请求时被忽 +略。另请参阅 `man 2 poll`。 + + +2.1.2 接收时间戳 +^^^^^^^^^^^^^^^^ + +在接收时，没有理由从套接字错误队列读取。SCM_TIMESTAMPING 辅助数据与 +数据包数据一起通过正常 recvmsg() 发送。由于这不是套接字错误，它不伴 +随消息 SOL_IP(V6)/IP(V6)_RECVERROR。在这种情况下，struct +scm_timestamping 中的三个字段含义隐式定义。ts[0] 在设置时包含软件 +时间戳，ts[1] 再次被弃用，ts[2] 在设置时包含硬件时间戳。 + + +3. 硬件时间戳配置：ETHTOOL_MSG_TSCONFIG_SET/GET +=============================================== + +硬件时间戳也必须为每个设备驱动程序初始化，该驱动程序预期执行硬件时间戳。 +参数在 include/uapi/linux/net_tstamp.h 中定义为:: + + struct hwtstamp_config { + int flags; /* 目前没有定义的标志，必须为零 */ + int tx_type; /* HWTSTAMP_TX_* */ + int rx_filter; /* HWTSTAMP_FILTER_* */ + }; + +期望的行为通过 tsconfig netlink 套接字 ``ETHTOOL_MSG_TSCONFIG_SET`` +传递到内核，并通过 ``ETHTOOL_A_TSCONFIG_TX_TYPES``、 +``ETHTOOL_A_TSCONFIG_RX_FILTERS`` 和 ``ETHTOOL_A_TSCONFIG_HWTSTAMP_FLAGS`` +netlink 属性设置 struct hwtstamp_config 相应地。 + +``ETHTOOL_A_TSCONFIG_HWTSTAMP_PROVIDER`` netlink 嵌套属性用于选择 +硬件时间戳的来源。它由设备源的索引和时间戳类型限定符组成。 + +驱动程序可以自由使用比请求更宽松的配置。预期驱动程序应仅实现可以直接支持的 +最通用模式。例如，如果硬件可以支持 HWTSTAMP_FILTER_PTP_V2_EVENT，则它 +通常应始终升级HWTSTAMP_FILTER_PTP_V2_L2_SYNC，依此类推，因为 +HWTSTAMP_FILTER_PTP_V2_EVENT 更通用（更实用）。 + +支持硬件时间戳的驱动程序应更新 struct，并可能返回更宽松的实际配置。如果 +请求的数据包无法进行时间戳，则不应更改任何内容，并返回 ERANGE（与 EINVAL +相反，这表明 SIOCSHWTSTAMP 根本不支持）。 + +只有具有管理权限的进程才能更改配置。用户空间负责确保多个进程不会相互干扰， +并确保设置被重置。 + +任何进程都可以通过请求 tsconfig netlink 套接字 ``ETHTOOL_MSG_TSCONFIG_GET`` +读取实际配置。 + +遗留配置是使用 ioctl(SIOCSHWTSTAMP) 与指向 struct ifreq 的指针，其 +ifr_data指向 struct hwtstamp_config。tx_type 和 rx_filter 是驱动 +程序期望执行的提示。如果请求的细粒度过滤对传入数据包不支持，驱动程序可能 +会对请求的数据包进行时间戳。ioctl(SIOCGHWTSTAMP) 以与 +ioctl(SIOCSHWTSTAMP) 相同的方式使用。然而,并非所有驱动程序都实现了这一点。 + +:: + + /* 可能的 hwtstamp_config->tx_type 值 */ + enum { + /* + * 不会需要硬件时间戳的传出数据包； + * 如果数据包到达并请求它，则不会进行硬件时间戳 + */ + HWTSTAMP_TX_OFF, + + /* + * 启用传出数据包的硬件时间戳； + * 数据包的发送者决定哪些数据包需要时间戳， + * 在发送数据包之前设置 SOF_TIMESTAMPING_TX_SOFTWARE + */ + HWTSTAMP_TX_ON, + }; + + /* 可能的 hwtstamp_config->rx_filter 值 */ + enum { + /* 时间戳不传入任何数据包 */ + HWTSTAMP_FILTER_NONE, + + /* 时间戳任何传入数据包 */ + HWTSTAMP_FILTER_ALL, + + /* 返回值：时间戳所有请求的数据包加上一些其他数据包 */ + HWTSTAMP_FILTER_SOME, + + /* PTP v1，UDP，任何事件数据包 */ + HWTSTAMP_FILTER_PTP_V1_L4_EVENT, + + /* 有关完整值列表，请检查 + * 文件 include/uapi/linux/net_tstamp.h + */ + }; + +3.1 硬件时间戳实现：设备驱动程序 +-------------------------------- + +支持硬件时间戳的驱动程序必须支持 ndo_hwtstamp_set NDO 或遗留 SIOCSHWTSTAMP +ioctl 并更新提供的 struct hwtstamp_config 与实际值，如 SIOCSHWTSTAMP 部分 +所述。它还应支持 ndo_hwtstamp_get 或遗留 SIOCGHWTSTAMP。 + +接收数据包的时间戳必须存储在 skb 中。要获取 skb 的共享时间戳结构，请调用 +skb_hwtstamps()。然后设置结构中的时间戳:: + + struct skb_shared_hwtstamps { + /* 硬件时间戳转换为自任意时间点的持续时间 + * 自定义点 + */ + ktime_t hwtstamp; + }; + +传出数据包的时间戳应按如下方式生成： + +- 在 hard_start_xmit() 中，检查 (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) + 是否不为零。如果是，则驱动程序期望执行硬件时间戳。 +- 如果此 skb 和请求都可能，则声明驱动程序正在执行时间戳，通过设置 skb_shinfo(skb)->tx_flags + 中的标志SKBTX_IN_PROGRESS，例如:: + + skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; + + 您可能希望保留与 skb 关联的指针，而不是释放 skb。不支持硬件时间戳的驱 + 动程序不会这样做。驱动程序绝不能触及 sk_buff::tstamp！它用于存储网络 + 子系统生成的软件时间戳。 +- 驱动程序应在尽可能接近将 sk_buff 传递给硬件时调用 skb_tx_timestamp()。 + skb_tx_timestamp()提供软件时间戳（如果请求），并且硬件时间戳不可用 + （SKBTX_IN_PROGRESS 未设置）。 +- 一旦驱动程序发送数据包并/或获取硬件时间戳，它就会通过 skb_tstamp_tx() + 传递时间戳，原始 skb，原始硬件时间戳。skb_tstamp_tx() 克隆原始 skb 并 + 添加时间戳，因此原始 skb 现在必须释放。如果获取硬件时间戳失败，则驱动程序 + 不应回退到软件时间戳。理由是，这会在处理管道中的稍后时间发生，而不是其他软 + 件时间戳，因此可能导致时间戳之间的差异。 + +3.2 堆叠 PTP 硬件时钟的特殊考虑 +------------------------------- + +在数据包的路径中可能存在多个 PHC（PTP 硬件时钟）。内核没有明确的机制允许用 +户选择用于时间戳以太网帧的 PHC。相反，假设最外层的 PHC 始终是最优的，并且 +内核驱动程序协作以实现这一目标。目前有 3 种堆叠 PHC 的情况，如下所示： + +3.2.1 DSA（分布式交换架构）交换机 +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +这些是具有一个端口连接到（完全不知情的）主机以太网接口的以太网交换机，并且 +执行端口多路复用或可选转发加速功能。每个 DSA 交换机端口在用户看来都是独立的 +（虚拟）网络接口，其网络 I/O 在底层通过主机接口（在 TX 上重定向到主机端口， +在 RX 上拦截帧）执行。 + +当 DSA 交换机连接到主机端口时，PTP 同步必须受到限制，因为交换机的可变排队 +延迟引入了主机端口与其 PTP 伙伴之间的路径延迟抖动。因此，一些 DSA 交换机 +包含自己的时间戳时钟，并具有在自身 MAC上执行网络时间戳的能力，因此路径延迟 +仅测量线缆和 PHY 传播延迟。支持 Linux 的 DSA 交换机暴露了与任何其他网络 +接口相同的 ABI（除了 DSA 接口在网络 I/O 方面实际上是虚拟的，它们确实有自 +己的PHC）。典型地，但不是强制性地，所有DSA 交换机接口共享相同的 PHC。 + +通过设计，DSA 交换机对连接到其主机端口的 PTP 时间戳不需要任何特殊的驱动程 +序处理。然而，当主机端口也支持 PTP 时间戳时，DSA 将负责拦截 +``.ndo_eth_ioctl`` 调用，并阻止尝试在主机端口上启用硬件时间戳。这是因为 +SO_TIMESTAMPING API 不允许为同一数据包传递多个硬件时间戳，因此除了 DSA +交换机端口之外的任何人都不应阻止这样做。 + +在通用层，DSA 提供了以下基础设施用于 PTP 时间戳： + +- ``.port_txtstamp()``：在用户空间从用户空间请求带有硬件 TX 时间戳请求 + 的数据包之前调用的钩子。这是必需的，因为硬件时间戳在实际 MAC 传输后才可 + 用，因此驱动程序必须准备将时间戳与原始数据包相关联，以便它可以重新入队数 + 据包到套接字的错误队列。为了保存可能在时间戳可用时需要的数据包，驱动程序 + 可以调用 ``skb_clone_sk``，在 skb->cb 中保存克隆指针，并入队一个 tx + skb 队列。通常，交换机会有一个PTP TX 时间戳寄存器（或有时是一个 FIFO）， + 其中时间戳可用。在 FIFO 的情况下，硬件可能会存储PTP 序列 ID/消息类型/ + 域号和实际时间戳的键值对。为了在等待时间戳的数据包队列和实际时间戳之间正 + 确关联，驱动程序可以使用 BPF 分类器(``ptp_classify_raw``) 来识别 PTP + 传输类型，并使用 ``ptp_parse_header`` 解释 PTP 头字段。可能存在一个 IRQ， + 当此时间戳可用时触发，或者驱动程序可能需要轮询，在调用 ``dev_queue_xmit()`` + 到主机接口之后。单步 TX 时间戳不需要数据包克隆，因为 PTP 协议不需要后续消 + 息（因为TX 时间戳已嵌入到数据包中），因此用户空间不期望数据包带有 TX 时间戳 + 被重新入队到其套接字的错误队列。 + +- ``.port_rxtstamp()``：在 RX 上，DSA 运行 BPF 分类器以识别 PTP 事件消息 + （任何其他数据包，包括 PTP 通用消息，不进行时间戳）。驱动程序提供原始（也是唯一） + 时间戳数据包，以便它可以标记它，如果它是立即可用的，或者延迟。在接收时，时间 + 戳可能要么在频带内（通过DSA 头中的元数据，或以其他方式附加到数据包），要么在频 + 带外（通过另一个 RX 时间戳FIFO）。在 RX 上延迟通常是必要的，当检索时间戳需要 + 可睡眠上下文时。在这种情况下，DSA驱动程序有责任调用 ``netif_rx()`` 在新鲜时 + 间戳的 skb 上。 + +3.2.2 以太网 PHYs +^^^^^^^^^^^^^^^^^ + +这些是通常在网络栈中履行第 1 层角色的设备，因此它们在 DSA 交换机中没有网络接 +口的表示。然而，PHY可能能够检测和时间戳 PTP 数据包，出于性能原因：在尽可能接 +近导线的地方获取的时间戳具有更稳定的同步性和更精确的精度。 + +支持 PTP 时间戳的 PHY 驱动程序必须创建 ``struct mii_timestamper`` 并添加 +指向它的指针在 ``phydev->mii_ts`` 中。 ``phydev->mii_ts`` 的存在将由网络 +堆栈检查。 + +由于 PHY 没有网络接口表示，PHY 的时间戳和 ethtool ioctl 操作需要通过其各自 +的 MAC驱动程序进行中介。因此，与 DSA 交换机不同，需要对每个单独的 MAC 驱动 +程序进行 PHY时间戳支持的修改。这包括： + +- 在 ``.ndo_eth_ioctl`` 中检查，是否 ``phy_has_hwtstamp(netdev->phydev)`` + 为真或假。如果是，则 MAC 驱动程序不应处理此请求，而应将其传递给 PHY 使用 + ``phy_mii_ioctl()``。 + +- 在 RX 上，特殊干预可能或可能不需要，具体取决于将 skb 传递到网络堆栈的函数。 + 在 plain ``netif_rx()`` 和类似情况下，MAC 驱动程序必须检查是否 + ``skb_defer_rx_timestamp(skb)`` 是必要的，如果是，则不调用 ``netif_rx()``。 + 如果 ``CONFIG_NETWORK_PHY_TIMESTAMPING`` 启用，并且 + ``skb->dev->phydev->mii_ts`` 存在，它的 ``.rxtstamp()`` 钩子现在将被调 + 用，以使用与 DSA 类似的逻辑确定 RX 时间戳延迟是否必要。同样像 DSA，它成为 + PHY 驱动程序的责任，在时间戳可用时发送数据包到堆栈。 + + 对于其他 skb 接收函数，例如 ``napi_gro_receive`` 和 ``netif_receive_skb``， + 堆栈会自动检查是否 ``skb_defer_rx_timestamp()`` 是必要的，因此此检查不 + 需要在驱动程序内部。 + +- 在 TX 上，同样，特殊干预可能或可能不需要。调用 ``mii_ts->txtstamp()``钩 + 子的函数名为``skb_clone_tx_timestamp()``。此函数可以直接调用（在这种情 + 况下，确实需要显式 MAC 驱动程序支持），但函数也 piggybacks 从 + ``skb_tx_timestamp()`` 调用，许多 MAC 驱动程序已经为软件时间戳目的执行。 + 因此，如果 MAC 支持软件时间戳，则它不需要在此阶段执行任何其他操作。 + +3.2.3 MII 总线嗅探设备 +^^^^^^^^^^^^^^^^^^^^^^ + +这些执行与时间戳以太网 PHY 相同的角色，除了它们是离散设备，因此可以与任何 PHY +组合，即使它不支持时间戳。在 Linux 中，它们是可发现的，可以通过 Device Tree +附加到 ``struct phy_device``，对于其余部分，它们使用与那些相同的 mii_ts 基 +础设施。请参阅 Documentation/devicetree/bindings/ptp/timestamper.txt 了 +解更多详细信息。 + +3.2.4 MAC 驱动程序的其他注意事项 +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +堆叠 PHC 可能会暴露 MAC 驱动程序的错误，这些错误在未堆叠 PHC 时无法触发。一个 +例子涉及此行代码，已经在前面的部分中介绍过:: + + skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; + +任何 TX 时间戳逻辑，无论是普通的 MAC 驱动程序、DSA 交换机驱动程序、PHY 驱动程 +序还是 MII 总线嗅探设备驱动程序，都应该设置此标志。但一个未意识到 PHC 堆叠的 +MAC 驱动程序可能会被其他不是它自己的实体设置此标志，并传递一个重复的时间戳。例 +如，典型的 TX 时间戳逻辑可能是将传输部分分为 2 个部分： + +1. "TX"：检查是否通过 ``.ndo_eth_ioctl``（"``priv->hwtstamp_tx_enabled + == true``"）和当前 skb 是否需要 TX 时间戳（"``skb_shinfo(skb)->tx_flags + & SKBTX_HW_TSTAMP``"）。如果为真，则设置 "``skb_shinfo(skb)->tx_flags + |= SKBTX_IN_PROGRESS``" 标志。注意：如上所述，在堆叠 PHC 系统中，此条件 + 不应触发，因为此 MAC 肯定不是最外层的 PHC。但这是典型的错误所在。传输继续 + 使用此数据包。 + +2. "TX 确认"：传输完成。驱动程序检查是否需要收集任何 TX 时间戳。这里通常是典 + 型的错误所在：驱动程序采取捷径，只检查 "``skb_shinfo(skb)->tx_flags & + SKBTX_IN_PROGRESS``" 是否设置。在堆叠 PHC 系统中，这是错误的，因为此 MAC + 驱动程序不是唯一在 TX 数据路径中启用 SKBTX_IN_PROGRESS 的实体。 + +此问题的正确解决方案是 MAC 驱动程序在其 "TX 确认" 部分中有一个复合检查，不仅 +针对 "``skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS``"，还针对 +"``priv->hwtstamp_tx_enabled == true``"。因为系统确保 PTP 时间戳仅对最 +外层 PHC 启用，此增强检查将避免向用户空间传递重复的 TX 时间戳。 diff --git a/Documentation/translations/zh_CN/rust/general-information.rst b/Documentation/translations/zh_CN/rust/general-information.rst index 251f6ee2bb4435..9b5e37e13f38a0 100644 --- a/Documentation/translations/zh_CN/rust/general-information.rst +++ b/Documentation/translations/zh_CN/rust/general-information.rst @@ -13,6 +13,7 @@ 本文档包含了在内核中使用Rust支持时需要了解的有用信息。 +.. _rust_code_documentation_zh_cn: 代码文档 -------- diff --git a/Documentation/translations/zh_CN/rust/index.rst b/Documentation/translations/zh_CN/rust/index.rst index b01f887e716792..5347d47295881e 100644 --- a/Documentation/translations/zh_CN/rust/index.rst +++ b/Documentation/translations/zh_CN/rust/index.rst @@ -10,7 +10,35 @@ Rust ==== -与内核中的Rust有关的文档。若要开始在内核中使用Rust，请阅读quick-start.rst指南。 +与内核中的Rust有关的文档。若要开始在内核中使用Rust，请阅读 quick-start.rst 指南。 + +Rust 实验 +--------- +Rust 支持在 v6.1 版本中合并到主线，以帮助确定 Rust 作为一种语言是否适合内核， +即是否值得进行权衡。 + +目前，Rust 支持主要面向对 Rust 支持感兴趣的内核开发人员和维护者， +以便他们可以开始处理抽象和驱动程序，并帮助开发基础设施和工具。 + +如果您是终端用户，请注意，目前没有适合或旨在生产使用的内置驱动程序或模块， +并且 Rust 支持仍处于开发/实验阶段，尤其是对于特定内核配置。 + +代码文档 +-------- + +给定一个内核配置，内核可能会生成 Rust 代码文档，即由 ``rustdoc`` 工具呈现的 HTML。 + +.. only:: rustdoc and html + + 该内核文档使用 `Rust 代码文档 `_ 构建。 + +.. only:: not rustdoc and html + + 该内核文档不使用 Rust 代码文档构建。 + +预生成版本提供在：https://rust.docs.kernel.org。 + +请参阅 :ref:`代码文档 ` 部分以获取更多详细信息。 .. toctree:: :maxdepth: 1 @@ -19,6 +47,9 @@ Rust general-information coding-guidelines arch-support + testing + +你还可以在 :doc:`../../../process/kernel-docs` 中找到 Rust 的学习材料。 .. only:: subproject and html diff --git a/Documentation/translations/zh_CN/rust/testing.rst b/Documentation/translations/zh_CN/rust/testing.rst new file mode 100644 index 00000000000000..ca81f1cef6eb70 --- /dev/null +++ b/Documentation/translations/zh_CN/rust/testing.rst @@ -0,0 +1,215 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/rust/testing.rst + +:翻译: + + 郭杰 Ben Guo + +测试 +==== + +本文介绍了如何在内核中测试 Rust 代码。 + +有三种测试类型： + +- KUnit 测试 +- ``#[test]`` 测试 +- Kselftests + +KUnit 测试 +---------- + +这些测试来自 Rust 文档中的示例。它们会被转换为 KUnit 测试。 + +使用 +**** + +这些测试可以通过 KUnit 运行。例如，在命令行中使用 ``kunit_tool`` （ ``kunit.py`` ）:: + + ./tools/testing/kunit/kunit.py run --make_options LLVM=1 --arch x86_64 --kconfig_add CONFIG_RUST=y + +或者，KUnit 也可以在内核启动时以内置方式运行。获取更多 KUnit 信息，请参阅 +Documentation/dev-tools/kunit/index.rst。 +关于内核内置与命令行测试的详细信息，请参阅 Documentation/dev-tools/kunit/architecture.rst。 + +要使用这些 KUnit 文档测试，需要在内核配置中启用以下选项:: + + CONFIG_KUNIT + Kernel hacking -> Kernel Testing and Coverage -> KUnit - Enable support for unit tests + CONFIG_RUST_KERNEL_DOCTESTS + Kernel hacking -> Rust hacking -> Doctests for the `kernel` crate + +KUnit 测试即文档测试 +******************** + +文档测试（ *doctests* ）一般用于展示函数、结构体或模块等的使用方法。 + +它们非常方便，因为它们就写在文档旁边。例如： + +.. code-block:: rust + + /// 求和两个数字。 + /// + /// ``` + /// assert_eq!(mymod::f(10, 20), 30); + /// ``` + pub fn f(a: i32, b: i32) -> i32 { + a + b + } + +在用户空间中，这些测试由 ``rustdoc`` 负责收集并运行。单独使用这个工具已经很有价值， +因为它可以验证示例能否成功编译（确保和代码保持同步）， +同时还可以运行那些不依赖内核 API 的示例。 + +然而，在内核中，这些测试会转换成 KUnit 测试套件。 +这意味着文档测试会被编译成 Rust 内核对象，从而可以在构建的内核环境中运行。 + +通过与 KUnit 集成，Rust 的文档测试可以复用内核现有的测试设施。 +例如，内核日志会显示:: + + KTAP version 1 + 1..1 + KTAP version 1 + # Subtest: rust_doctests_kernel + 1..59 + # rust_doctest_kernel_build_assert_rs_0.location: rust/kernel/build_assert.rs:13 + ok 1 rust_doctest_kernel_build_assert_rs_0 + # rust_doctest_kernel_build_assert_rs_1.location: rust/kernel/build_assert.rs:56 + ok 2 rust_doctest_kernel_build_assert_rs_1 + # rust_doctest_kernel_init_rs_0.location: rust/kernel/init.rs:122 + ok 3 rust_doctest_kernel_init_rs_0 + ... + # rust_doctest_kernel_types_rs_2.location: rust/kernel/types.rs:150 + ok 59 rust_doctest_kernel_types_rs_2 + # rust_doctests_kernel: pass:59 fail:0 skip:0 total:59 + # Totals: pass:59 fail:0 skip:0 total:59 + ok 1 rust_doctests_kernel + +文档测试中，也可以正常使用 `? `_ 运算符，例如： + +.. code-block:: rust + + /// ``` + /// # use kernel::{spawn_work_item, workqueue}; + /// spawn_work_item!(workqueue::system(), || pr_info!("x\n"))?; + /// # Ok::<(), Error>(()) + /// ``` + +这些测试和普通代码一样，也可以在 ``CLIPPY=1`` 条件下通过 Clippy 进行编译， +因此可以从额外的 lint 检查中获益。 + +为了便于开发者定位文档测试出错的具体行号，日志会输出一条 KTAP 诊断信息。 +其中标明了原始测试的文件和行号（不是 ``rustdoc`` 生成的临时 Rust 文件位置）:: + + # rust_doctest_kernel_types_rs_2.location: rust/kernel/types.rs:150 + +Rust 测试中常用的断言宏是来自 Rust 标准库（ ``core`` ）中的 ``assert!`` 和 ``assert_eq!`` 宏。 +内核提供了一个定制版本，这些宏的调用会被转发到 KUnit。 +和 KUnit 测试不同的是，这些宏不需要传递上下文参数（ ``struct kunit *`` ）。 +这使得它们更易于使用，同时文档的读者无需关心底层用的是什么测试框架。 +此外，这种方式未来也许可以让我们更容易测试第三方代码。 + +当前有一个限制：KUnit 不支持在其他任务中执行断言。 +因此，如果断言真的失败了，我们只是简单地把错误打印到内核日志里。 +另外，文档测试不适用于非公开的函数。 + +作为文档中的测试示例，应当像 “实际代码” 一样编写。 +例如：不要使用 ``unwrap()`` 或 ``expect()``，请使用 `? `_ 运算符。 +更多背景信息，请参阅： + + https://rust.docs.kernel.org/kernel/error/type.Result.html#error-codes-in-c-and-rust + +``#[test]`` 测试 +---------------- + +此外，还有 ``#[test]`` 测试。与文档测试类似，这些测试与用户空间中的测试方式也非常相近，并且同样会映射到 KUnit。 + +这些测试通过 ``kunit_tests`` 过程宏引入，该宏将测试套件的名称作为参数。 + +例如，假设想要测试前面文档测试示例中的函数 ``f``，我们可以在定义该函数的同一文件中编写： + +.. code-block:: rust + + #[kunit_tests(rust_kernel_mymod)] + mod tests { + use super::*; + + #[test] + fn test_f() { + assert_eq!(f(10, 20), 30); + } + } + +如果我们执行这段代码，内核日志会显示:: + + KTAP version 1 + # Subtest: rust_kernel_mymod + # speed: normal + 1..1 + # test_f.speed: normal + ok 1 test_f + ok 1 rust_kernel_mymod + +与文档测试类似， ``assert!`` 和 ``assert_eq!`` 宏被映射回 KUnit 并且不会发生 panic。 +同样，支持 `? `_ 运算符， +测试函数可以什么都不返回（单元类型 ``()``）或 ``Result`` （任何 ``Result``）。例如： + +.. code-block:: rust + + #[kunit_tests(rust_kernel_mymod)] + mod tests { + use super::*; + + #[test] + fn test_g() -> Result { + let x = g()?; + assert_eq!(x, 30); + Ok(()) + } + } + +如果我们运行测试并且调用 ``g`` 失败，那么内核日志会显示:: + + KTAP version 1 + # Subtest: rust_kernel_mymod + # speed: normal + 1..1 + # test_g: ASSERTION FAILED at rust/kernel/lib.rs:335 + Expected is_test_result_ok(test_g()) to be true, but is false + # test_g.speed: normal + not ok 1 test_g + not ok 1 rust_kernel_mymod + +如果 ``#[test]`` 测试可以对用户起到示例作用，那就应该改用文档测试。 +即使是 API 的边界情况，例如错误或边界问题，放在示例中展示也同样有价值。 + +``rusttest`` 宿主机测试 +----------------------- + +这类测试运行在用户空间，可以通过 ``rusttest`` 目标在构建内核的宿主机中编译并运行:: + + make LLVM=1 rusttest + +当前操作需要内核 ``.config``。 + +目前，它们主要用于测试 ``macros`` crate 的示例。 + +Kselftests +---------- + +Kselftests 可以在 ``tools/testing/selftests/rust`` 文件夹中找到。 + +测试所需的内核配置选项列在 ``tools/testing/selftests/rust/config`` 文件中， +可以借助 ``merge_config.sh`` 脚本合并到现有配置中:: + + ./scripts/kconfig/merge_config.sh .config tools/testing/selftests/rust/config + +Kselftests 会在内核源码树中构建，以便在运行相同版本内核的系统上执行测试。 + +一旦安装并启动了与源码树匹配的内核，测试即可通过以下命令编译并执行:: + + make TARGETS="rust" kselftest + +请参阅 Documentation/dev-tools/kselftest.rst 文档以获取更多信息。 diff --git a/Documentation/translations/zh_CN/scsi/index.rst b/Documentation/translations/zh_CN/scsi/index.rst new file mode 100644 index 00000000000000..5f1803e2706c6c --- /dev/null +++ b/Documentation/translations/zh_CN/scsi/index.rst @@ -0,0 +1,92 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/scsi/index.rst + +:翻译: + + 郝栋栋 doubled + +:校译: + + + +========== +SCSI子系统 +========== + +.. toctree:: + :maxdepth: 1 + +简介 +==== + +.. toctree:: + :maxdepth: 1 + + scsi + +SCSI驱动接口 +============ + +.. toctree:: + :maxdepth: 1 + + scsi_mid_low_api + scsi_eh + +SCSI驱动参数 +============ + +.. toctree:: + :maxdepth: 1 + + scsi-parameters + link_power_management_policy + +SCSI主机适配器驱动 +================== + +.. toctree:: + :maxdepth: 1 + + libsas + sd-parameters + wd719x + +Todolist: + +* 53c700 +* aacraid +* advansys +* aha152x +* aic79xx +* aic7xxx +* arcmsr_spec +* bfa +* bnx2fc +* BusLogic +* cxgb3i +* dc395x +* dpti +* FlashPoint +* g_NCR5380 +* hpsa +* hptiop +* lpfc +* megaraid +* ncr53c8xx +* NinjaSCSI +* ppa +* qlogicfas +* scsi-changer +* scsi_fc_transport +* scsi-generic +* smartpqi +* st +* sym53c500_cs +* sym53c8xx_2 +* tcm_qla2xxx +* ufs + +* scsi_transport_srp/figures diff --git a/Documentation/translations/zh_CN/scsi/libsas.rst b/Documentation/translations/zh_CN/scsi/libsas.rst new file mode 100644 index 00000000000000..15fa71cdd8210a --- /dev/null +++ b/Documentation/translations/zh_CN/scsi/libsas.rst @@ -0,0 +1,425 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/scsi/libsas.rst + +:翻译: + + 张钰杰 Yujie Zhang + +:校译: + +====== +SAS 层 +====== + +SAS 层是一个管理基础架构，用于管理 SAS LLDD。它位于 SCSI Core +与 SAS LLDD 之间。 体系结构如下: SCSI Core 关注的是 SAM/SPC 相 +关的问题；SAS LLDD 及其序列控制器负责 PHY 层、OOB 信号以及链路 +管理；而 SAS 层则负责以下任务:: + + * SAS Phy、Port 和主机适配器（HA）事件管理（事件由 LLDD + 生成，由 SAS 层处理）； + * SAS 端口的管理（创建与销毁）； + * SAS 域的发现与重新验证； + * SAS 域内设备的管理； + * SCSI 主机的注册与注销； + * 将设备注册到 SCSI Core（SAS 设备）或 libata（SATA 设备）； + * 扩展器的管理，并向用户空间导出扩展器控制接口。 + +SAS LLDD 是一种 PCI 设备驱动程序。它负责 PHY 层和 OOB（带外） +信号的管理、厂商特定的任务，并向 SAS 层上报事件。 + +SAS 层实现了 SAS 1.1 规范中定义的大部分 SAS 功能。 + +sas_ha_struct 结构体用于向 SAS 层描述一个 SAS LLDD。该结构的 +大部分字段由 SAS 层使用，但其中少数字段需要由 LLDD 进行初始化。 + +在完成硬件初始化之后，应当在驱动的 probe() 函数中调用 +sas_register_ha()。该函数会将 LLDD 注册到 SCSI 子系统中，创 +建一个对应的 SCSI 主机，并将你的 SAS 驱动程序注册到其在 sysfs +下创建的 SAS 设备树中。随后该函数将返回。接着，你需要使能 PHY， +以启动实际的 OOB（带外）过程；此时驱动将开始调用 notify_* 系 +列事件回调函数。 + +结构体说明 +========== + +``struct sas_phy`` +------------------ + +通常情况下，该结构体会被静态地嵌入到驱动自身定义的 PHY 结构体中, +例如:: + + struct my_phy { + blah; + struct sas_phy sas_phy; + bleh; + } + +随后，在主机适配器（HA）的结构体中，所有的 PHY 通常以 my_phy +数组的形式存在（如下文所示）。 + +在初始化各个 PHY 时，除了初始化驱动自定义的 PHY 结构体外，还 +需要同时初始化其中的 sas_phy 结构体。 + +一般来说，PHY 的管理由 LLDD 负责，而端口（port）的管理由 SAS +层负责。因此，PHY 的初始化与更新由 LLDD 完成，而端口的初始化与 +更新则由 SAS 层完成。系统设计中规定，某些字段可由 LLDD 进行读 +写，而 SAS 层只能读取这些字段；反之亦然。其设计目的是为了避免不 +必要的锁操作。 + +在该设计中，某些字段可由 LLDD 进行读写（RW），而 SAS 层仅可读 +取这些字段；反之亦然。这样设计的目的在于避免不必要的锁操作。 + +enabled + - 必须设置(0/1) + +id + - 必须设置[0,MAX_PHYS)] + +class, proto, type, role, oob_mode, linkrate + - 必须设置。 + +oob_mode + - 当 OOB（带外信号）完成后，设置此字段，然后通知 SAS 层。 + +sas_addr + - 通常指向一个保存该 PHY 的 SAS 地址的数组，该数组可能位于 + 驱动自定义的 my_phy 结构体中。 + +attached_sas_addr + - 当 LLDD 接收到 IDENTIFY 帧或 FIS 帧时，应在通知 SAS 层 + 之前设置该字段。其设计意图在于：有时 LLDD 可能需要伪造或 + 提供一个与实际不同的 SAS 地址用于该 PHY/端口，而该机制允许 + LLDD 这样做。理想情况下，应将 SAS 地址从 IDENTIFY 帧中 + 复制过来；对于直接连接的 SATA 设备，也可以由 LLDD 生成一 + 个 SAS 地址。后续的发现过程可能会修改此字段。 + +frame_rcvd + - 当接收到 IDENTIFY 或 FIS 帧时，将该帧复制到此处。正确的 + 操作流程是获取锁 → 复制数据 → 设置 frame_rcvd_size → 释 + 放锁 → 调用事件通知。该字段是一个指针，因为驱动无法精确确 + 定硬件帧的大小；因此，实际的帧数据数组应定义在驱动自定义的 + PHY 结构体中，然后让此指针指向该数组。在持锁状态下，将帧从 + DMA 可访问内存区域复制到该数组中。 + +sas_prim + - 用于存放接收到的原语（primitive）。参见 sas.h。操作流程同 + 样是：获取锁 → 设置 primitive → 释放锁 → 通知事件。 + +port + - 如果该 PHY 属于某个端口（port），此字段指向对应的 sas_port + 结构体。LLDD 仅可读取此字段。它由 SAS 层设置，用于指向当前 + PHY 所属的 sas_port。 + +ha + - 可以由 LLDD 设置；但无论是否设置，SAS 层都会再次对其进行赋值。 + +lldd_phy + - LLDD 应将此字段设置为指向自身定义的 PHY 结构体，这样当 SAS + 层调用某个回调并传入 sas_phy 时，驱动可以快速定位自身的 PHY + 结构体。如果 sas_phy 是嵌入式成员，也可以使用 container_of() + 宏进行访问——两种方式均可。 + +``struct sas_port`` +------------------- + +LLDD 不应修改该结构体中的任何字段——它只能读取这些字段。这些字段的 +含义应当是不言自明的。 + +phy_mask 为 32 位，目前这一长度已足够使用，因为尚未听说有主机适配 +器拥有超过8 个 PHY。 + +lldd_port + - 目前尚无明确用途。不过，对于那些希望在 LLDD 内部维护自身端 + 口表示的驱动，实现时可以利用该字段。 + +``struct sas_ha_struct`` +------------------------ + +它通常静态声明在你自己的 LLDD 结构中，用于描述您的适配器:: + + struct my_sas_ha { + blah; + struct sas_ha_struct sas_ha; + struct my_phy phys[MAX_PHYS]; + struct sas_port sas_ports[MAX_PHYS]; /* (1) */ + bleh; + }; + + (1) 如果你的 LLDD 没有自己的端口表示 + +需要初始化（示例函数如下所示）。 + +pcidev +^^^^^^ + +sas_addr + - 由于 SAS 层不想弄乱内存分配等, 因此这指向静态分配的数 + 组中的某个位置（例如，在您的主机适配器结构中），并保存您或 + 制造商等给出的主机适配器的 SAS 地址。 + +sas_port +^^^^^^^^ + +sas_phy + - 指向结构体的指针数组（参见上文关于 sas_addr 的说明）。 + 这些指针必须设置。更多细节见下文说明。 + +num_phys + - 表示 sas_phy 数组中 PHY 的数量，同时也表示 sas_port + 数组中的端口数量。一个端口最多对应一个 PHY，因此最大端口数 + 等于 num_phys。因此，结构中不再单独使用 num_ports 字段， + 而仅使用 num_phys。 + +事件接口:: + + /* LLDD 调用以下函数来通知 SAS 类层发生事件 */ + void sas_notify_port_event(struct sas_phy *, enum port_event, gfp_t); + void sas_notify_phy_event(struct sas_phy *, enum phy_event, gfp_t); + +端口事件通知:: + + /* SAS 类层调用以下回调来通知 LLDD 端口事件 */ + void (*lldd_port_formed)(struct sas_phy *); + void (*lldd_port_deformed)(struct sas_phy *); + +如果 LLDD 希望在端口形成或解散时接收通知，则应将上述回调指针设 +置为符合函数类型定义的处理函数。 + +SAS LLDD 还应至少实现 SCSI 协议中定义的一种任务管理函数（TMFs）:: + + /* 任务管理函数. 必须在进程上下文中调用 */ + int (*lldd_abort_task)(struct sas_task *); + int (*lldd_abort_task_set)(struct domain_device *, u8 *lun); + int (*lldd_clear_task_set)(struct domain_device *, u8 *lun); + int (*lldd_I_T_nexus_reset)(struct domain_device *); + int (*lldd_lu_reset)(struct domain_device *, u8 *lun); + int (*lldd_query_task)(struct sas_task *); + +如需更多信息，请参考 T10.org。 + +端口与适配器管理:: + + /* 端口与适配器管理 */ + int (*lldd_clear_nexus_port)(struct sas_port *); + int (*lldd_clear_nexus_ha)(struct sas_ha_struct *); + +SAS LLDD 至少应实现上述函数中的一个。 + +PHY 管理:: + + /* PHY 管理 */ + int (*lldd_control_phy)(struct sas_phy *, enum phy_func); + +lldd_ha + - 应设置为指向驱动的主机适配器（HA）结构体的指针。如果 sas_ha_struct + 被嵌入到更大的结构体中，也可以通过 container_of() 宏来获取。 + +一个示例的初始化与注册函数可以如下所示：（该函数应在 probe() +函数的最后调用）但必须在使能 PHY 执行 OOB 之前调用:: + + static int register_sas_ha(struct my_sas_ha *my_ha) + { + int i; + static struct sas_phy *sas_phys[MAX_PHYS]; + static struct sas_port *sas_ports[MAX_PHYS]; + + my_ha->sas_ha.sas_addr = &my_ha->sas_addr[0]; + + for (i = 0; i < MAX_PHYS; i++) { + sas_phys[i] = &my_ha->phys[i].sas_phy; + sas_ports[i] = &my_ha->sas_ports[i]; + } + + my_ha->sas_ha.sas_phy = sas_phys; + my_ha->sas_ha.sas_port = sas_ports; + my_ha->sas_ha.num_phys = MAX_PHYS; + + my_ha->sas_ha.lldd_port_formed = my_port_formed; + + my_ha->sas_ha.lldd_dev_found = my_dev_found; + my_ha->sas_ha.lldd_dev_gone = my_dev_gone; + + my_ha->sas_ha.lldd_execute_task = my_execute_task; + + my_ha->sas_ha.lldd_abort_task = my_abort_task; + my_ha->sas_ha.lldd_abort_task_set = my_abort_task_set; + my_ha->sas_ha.lldd_clear_task_set = my_clear_task_set; + my_ha->sas_ha.lldd_I_T_nexus_reset= NULL; (2) + my_ha->sas_ha.lldd_lu_reset = my_lu_reset; + my_ha->sas_ha.lldd_query_task = my_query_task; + + my_ha->sas_ha.lldd_clear_nexus_port = my_clear_nexus_port; + my_ha->sas_ha.lldd_clear_nexus_ha = my_clear_nexus_ha; + + my_ha->sas_ha.lldd_control_phy = my_control_phy; + + return sas_register_ha(&my_ha->sas_ha); + } + +(2) SAS 1.1 未定义 I_T Nexus Reset TMF（任务管理功能）。 + +事件 +==== + +事件是 SAS LLDD 唯一的通知 SAS 层发生任何情况的方式。 +LLDD 没有其他方法可以告知 SAS 层其内部或 SAS 域中发生的事件。 + +Phy 事件:: + + PHYE_LOSS_OF_SIGNAL, (C) + PHYE_OOB_DONE, + PHYE_OOB_ERROR, (C) + PHYE_SPINUP_HOLD. + +端口事件，通过 _phy_ 传递:: + + PORTE_BYTES_DMAED, (M) + PORTE_BROADCAST_RCVD, (E) + PORTE_LINK_RESET_ERR, (C) + PORTE_TIMER_EVENT, (C) + PORTE_HARD_RESET. + +主机适配器事件： + HAE_RESET + +SAS LLDD 应能够生成以下事件:: + + - 来自 C 组的至少一个事件（可选）， + - 标记为 M（必需）的事件为必需事件（至少一种）； + - 若希望 SAS 层处理域重新验证（domain revalidation），则 + 应生成标记为 E（扩展器）的事件（仅需一种）； + - 未标记的事件为可选事件。 + +含义 + +HAE_RESET + - 当 HA 发生内部错误并被复位时。 + +PORTE_BYTES_DMAED + - 在接收到 IDENTIFY/FIS 帧时。 + +PORTE_BROADCAST_RCVD + - 在接收到一个原语时。 + +PORTE_LINK_RESET_ERR + - 定时器超时、信号丢失、丢失 DWS 等情况。 [1]_ + +PORTE_TIMER_EVENT + - DWS 复位超时定时器到期时。[1]_ + +PORTE_HARD_RESET + - 收到 Hard Reset 原语。 + +PHYE_LOSS_OF_SIGNAL + - 设备已断开连接。 [1]_ + +PHYE_OOB_DONE + - OOB 过程成功完成，oob_mode 有效。 + +PHYE_OOB_ERROR + - 执行 OOB 过程中出现错误，设备可能已断开。 [1]_ + +PHYE_SPINUP_HOLD + - 检测到 SATA 设备，但未发送 COMWAKE 信号。 + +.. [1] 应设置或清除 phy 中相应的字段，或者从 tasklet 中调用 + 内联函数 sas_phy_disconnected()，该函数只是一个辅助函数。 + +执行命令 SCSI RPC:: + + int (*lldd_execute_task)(struct sas_task *, gfp_t gfp_flags); + +用于将任务排队提交给 SAS LLDD，@task 为要执行的任务，@gfp_mask +为定义调用者上下文的 gfp 掩码。 + +此函数应实现 执行 SCSI RPC 命令。 + +也就是说，当调用 lldd_execute_task() 时，命令应当立即在传输 +层发出。SAS LLDD 中在任何层级上都不应再进行队列排放。 + +返回值:: + + * 返回 -SAS_QUEUE_FULL 或 -ENOMEM 表示未排入队列； + * 返回 0 表示任务已成功排入队列。 + +:: + + struct sas_task { + dev —— 此任务目标设备； + task_proto —— 协议类型，为 enum sas_proto 中的一种； + scatter —— 指向散布/聚集（SG）列表数组的指针； + num_scatter —— SG 列表元素数量； + total_xfer_len —— 预计传输的总字节数； + data_dir —— 数据传输方向(PCI_DMA_*)； + task_done —— 任务执行完成时的回调函数。 + }; + +发现 +==== + +sysfs 树有以下用途:: + + a) 它显示当前时刻 SAS 域的物理布局，即展示当前物理世界中 + 域的实际结构。 + b) 显示某些设备的参数。 _at_discovery_time_. + +下面是一个指向 tree(1) 程序的链接，该工具在查看 SAS 域时非常 +有用： +ftp://mama.indstate.edu/linux/tree/ + +我期望用户空间的应用程序最终能够为此创建一个图形界面。 + +也就是说，sysfs 域树不会显示或保存某些状态变化，例如，如果你更 +改了 READY LED 含义的设置，sysfs 树不会反映这种状态变化；但它 +确实会显示域设备的当前连接状态。 + +维护内部设备状态变化的职责由上层（命令集驱动）和用户空间负责。 + +当某个设备或多个设备从域中拔出时，这一变化会立即反映在 sysfs +树中，并且这些设备会从系统中移除。 + +结构体 domain_device 描述了 SAS 域中的任意设备。它完全由 SAS +层管理。一个任务会指向某个域设备，SAS LLDD 就是通过这种方式知 +道任务应发送到何处。SAS LLDD 只读取 domain_device 结构的内容， +但不会创建或销毁它。 + +用户空间中的扩展器管理 +====================== + +在 sysfs 中的每个扩展器目录下，都有一个名为 "smp_portal" 的 +文件。这是一个二进制的 sysfs 属性文件，它实现了一个 SMP 入口 +（注意：这并不是一个 SMP 端口），用户空间程序可以通过它发送 +SMP 请求并接收 SMP 响应。 + +该功能的实现方式看起来非常简单: + +1. 构建要发送的 SMP 帧。其格式和布局在 SAS 规范中有说明。保持 + CRC 字段为 0。 + +open(2) + +2. 以读写模式打开该扩展器的 SMP portal sysfs 文件。 + +write(2) + +3. 将第 1 步中构建的帧写入文件。 + +read(2) + +4. 读取与所构建帧预期返回长度相同的数据量。如果读取的数据量与 + 预期不符，则表示发生了某种错误。 + +close(2) + +整个过程在 "expander_conf.c" 文件中的函数 do_smp_func() +及其调用者中有详细展示。 + +对应的内核实现位于 "sas_expander.c" 文件中。 + +程序 "expander_conf.c" 实现了上述逻辑。它接收一个参数——扩展器 +SMP portal 的 sysfs 文件名，并输出扩展器的信息，包括路由表内容。 + +SMP portal 赋予了你对扩展器的完全控制权，因此请谨慎操作。 diff --git a/Documentation/translations/zh_CN/scsi/link_power_management_policy.rst b/Documentation/translations/zh_CN/scsi/link_power_management_policy.rst new file mode 100644 index 00000000000000..f2ab8fdf4aa8ed --- /dev/null +++ b/Documentation/translations/zh_CN/scsi/link_power_management_policy.rst @@ -0,0 +1,32 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/scsi/link_power_management_policy.rst + +:翻译: + + 郝栋栋 doubled + +:校译: + + + +================ +链路电源管理策略 +================ + +该参数允许用户设置链路（接口）的电源管理模式。 +共计三类可选项： + +===================== ===================================================== +选项 作用 +===================== ===================================================== +min_power 指示控制器在可能的情况下尽量使链路处于最低功耗。 + 这可能会牺牲一定的性能，因为从低功耗状态恢复时会增加延迟。 + +max_performance 通常，这意味着不进行电源管理。指示 + 控制器优先考虑性能而非电源管理。 + +medium_power 指示控制器在可能的情况下进入较低功耗状态， + 而非最低功耗状态，从而改善min_power模式下的延迟。 +===================== ===================================================== diff --git a/Documentation/translations/zh_CN/scsi/scsi-parameters.rst b/Documentation/translations/zh_CN/scsi/scsi-parameters.rst new file mode 100644 index 00000000000000..ace777e070ea10 --- /dev/null +++ b/Documentation/translations/zh_CN/scsi/scsi-parameters.rst @@ -0,0 +1,118 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/scsi/scsi-parameters.rst + +:翻译: + + 郝栋栋 doubled + +:校译: + + + +============ +SCSI内核参数 +============ + +请查阅Documentation/admin-guide/kernel-parameters.rst以获取 +指定模块参数相关的通用信息。 + +当前文档可能不完全是最新和全面的。命令 ``modinfo -p ${modulename}`` +显示了可加载模块的参数列表。可加载模块被加载到内核中后，也会在 +/sys/module/${modulename}/parameters/ 目录下显示其参数。其 +中某些参数可以通过命令 +``echo -n ${value} > /sys/module/${modulename}/parameters/${parm}`` +在运行时修改。 + +:: + + advansys= [HW,SCSI] + 请查阅 drivers/scsi/advansys.c 文件头部。 + + aha152x= [HW,SCSI] + 请查阅 Documentation/scsi/aha152x.rst。 + + aha1542= [HW,SCSI] + 格式：[,,[,]] + + aic7xxx= [HW,SCSI] + 请查阅 Documentation/scsi/aic7xxx.rst。 + + aic79xx= [HW,SCSI] + 请查阅 Documentation/scsi/aic79xx.rst。 + + atascsi= [HW,SCSI] + 请查阅 drivers/scsi/atari_scsi.c。 + + BusLogic= [HW,SCSI] + 请查阅 drivers/scsi/BusLogic.c 文件中 + BusLogic_ParseDriverOptions()函数前的注释。 + + gvp11= [HW,SCSI] + + ips= [HW,SCSI] Adaptec / IBM ServeRAID 控制器 + 请查阅 drivers/scsi/ips.c 文件头部。 + + mac5380= [HW,SCSI] + 请查阅 drivers/scsi/mac_scsi.c。 + + scsi_mod.max_luns= + [SCSI] 最大可探测LUN数。 + 取值范围为 1 到 2^32-1。 + + scsi_mod.max_report_luns= + [SCSI] 接收到的最大LUN数。 + 取值范围为 1 到 16384。 + + NCR_D700= [HW,SCSI] + 请查阅 drivers/scsi/NCR_D700.c 文件头部。 + + ncr5380= [HW,SCSI] + 请查阅 Documentation/scsi/g_NCR5380.rst。 + + ncr53c400= [HW,SCSI] + 请查阅 Documentation/scsi/g_NCR5380.rst。 + + ncr53c400a= [HW,SCSI] + 请查阅 Documentation/scsi/g_NCR5380.rst。 + + ncr53c8xx= [HW,SCSI] + + osst= [HW,SCSI] SCSI磁带驱动 + 格式：, + 另请查阅 Documentation/scsi/st.rst。 + + scsi_debug_*= [SCSI] + 请查阅 drivers/scsi/scsi_debug.c。 + + scsi_mod.default_dev_flags= + [SCSI] SCSI默认设备标志 + 格式： + + scsi_mod.dev_flags= + [SCSI] 厂商和型号的黑/白名单条目 + 格式：:: + （flags 为整数值） + + scsi_mod.scsi_logging_level= + [SCSI] 日志级别的位掩码 + 位的定义请查阅 drivers/scsi/scsi_logging.h。 + 此参数也可以通过sysctl对dev.scsi.logging_level + 进行设置（/proc/sys/dev/scsi/logging_level）。 + 此外，S390-tools软件包提供了一个便捷的 + ‘scsi_logging_level’ 脚本，可以从以下地址下载： + https://github.com/ibm-s390-linux/s390-tools/blob/master/scripts/scsi_logging_level + + scsi_mod.scan= [SCSI] sync（默认）在发现SCSI总线过程中 + 同步扫描。async在内核线程中异步扫描，允许系统继续 + 启动流程。none忽略扫描，预期由用户空间完成扫描。 + + sim710= [SCSI,HW] + 请查阅 drivers/scsi/sim710.c 文件头部。 + + st= [HW,SCSI] SCSI磁带参数（缓冲区大小等） + 请查阅 Documentation/scsi/st.rst。 + + wd33c93= [HW,SCSI] + 请查阅 drivers/scsi/wd33c93.c 文件头部。 diff --git a/Documentation/translations/zh_CN/scsi/scsi.rst b/Documentation/translations/zh_CN/scsi/scsi.rst new file mode 100644 index 00000000000000..5d6e39c7cbb54e --- /dev/null +++ b/Documentation/translations/zh_CN/scsi/scsi.rst @@ -0,0 +1,48 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/scsi/scsi.rst + +:翻译: + + 郝栋栋 doubled + +:校译: + + + +============== +SCSI子系统文档 +============== + +Linux文档项目（LDP）维护了一份描述Linux内核（lk） 2.4中SCSI +子系统的文档。请参考： +https://www.tldp.org/HOWTO/SCSI-2.4-HOWTO 。LDP提供单页和 +多页的HTML版本，以及PostScript与PDF格式的文档。 + +在SCSI子系统中使用模块的注意事项 +================================ +Linux内核中的SCSI支持可以根据终端用户的需求以不同的方式模块 +化。为了理解你的选择，我们首先需要定义一些术语。 + +scsi-core（也被称为“中间层”）包含SCSI支持的核心。没有他你将 +无法使用任何其他SCSI驱动程序。SCSI核心支持可以是一个模块（ +scsi_mod.o），也可以编译进内核。如果SCSI核心是一个模块，那么 +他必须是第一个被加载的SCSI模块，如果你将卸载该模块，那么他必 +须是最后一个被卸载的模块。实际上，modprobe和rmmod命令将确保 +SCSI子系统中模块加载与卸载的正确顺序。 + +一旦SCSI核心存在于内核中（无论是编译进内核还是作为模块加载）， +独立的上层驱动和底层驱动可以按照任意顺序加载。磁盘驱动程序 +（sd_mod.o）、光盘驱动程序（sr_mod.o）、磁带驱动程序 [1]_ +（st.o）以及SCSI通用驱动程序（sg.o）代表了上层驱动，用于控制 +相应的各种设备。例如，你可以加载磁带驱动程序来使用磁带驱动器， +然后在不需要该驱动程序时卸载他（并释放相关内存）。 + +底层驱动程序用于支持您所运行硬件平台支持的不同主机卡。这些不同 +的主机卡通常被称为主机总线适配器（HBAs）。例如，aic7xxx.o驱动 +程序被用于控制Adaptec所属的所有最新的SCSI控制器。几乎所有的底 +层驱动都可以被编译为模块或直接编译进内核。 + +.. [1] 磁带驱动程序有一个变种用于控制OnStream磁带设备。其模块 + 名称为osst.o 。 diff --git a/Documentation/translations/zh_CN/scsi/scsi_eh.rst b/Documentation/translations/zh_CN/scsi/scsi_eh.rst new file mode 100644 index 00000000000000..26e0f30f0949cb --- /dev/null +++ b/Documentation/translations/zh_CN/scsi/scsi_eh.rst @@ -0,0 +1,482 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/scsi/scsi_eh.rst + +:翻译: + + 郝栋栋 doubled + +:校译: + + +=================== +SCSI 中间层错误处理 +=================== + +本文档描述了SCSI中间层（mid layer）的错误处理基础架构。 +关于SCSI中间层的更多信息，请参阅： +Documentation/scsi/scsi_mid_low_api.rst。 + +.. 目录 + + [1] SCSI 命令如何通过中间层传递并进入错误处理（EH） + [1-1] scsi_cmnd（SCSI命令）结构体 + [1-2] scmd（SCSI 命令）是如何完成的？ + [1-2-1] 通过scsi_done完成scmd + [1-2-2] 通过超时机制完成scmd + [1-3] 错误处理模块如何接管流程 + [2] SCSI错误处理机制工作原理 + [2-1] 基于细粒度回调的错误处理 + [2-1-1] 概览 + [2-1-2] scmd在错误处理流程中的传递路径 + [2-1-3] 控制流分析 + [2-2] 通过transportt->eh_strategy_handler()实现的错误处理 + [2-2-1] transportt->eh_strategy_handler()调用前的中间层状态 + [2-2-2] transportt->eh_strategy_handler()调用后的中间层状态 + [2-2-3] 注意事项 + + +1. SCSI命令在中间层及错误处理中的传递流程 +========================================= + +1.1 scsi_cmnd结构体 +------------------- + +每个SCSI命令都由struct scsi_cmnd（简称scmd）结构体 +表示。scmd包含两个list_head类型的链表节点：scmd->list +与scmd->eh_entry。其中scmd->list是用于空闲链表或设备 +专属的scmd分配链表，与错误处理讨论关联不大。而 +scmd->eh_entry则是专用于命令完成和错误处理链表，除非 +特别说明，本文讨论中所有scmd的链表操作均通过 +scmd->eh_entry实现。 + + +1.2 scmd是如何完成的？ +---------------------- + +底层设备驱动（LLDD）在获取SCSI命令（scmd）后，存在两种 +完成路径：底层驱动可通过调用hostt->queuecommand()时从 +中间层传递的scsi_done回调函数主动完成命令，或者当命令未 +及时完成时由块层（block layer）触发超时处理机制。 + + +1.2.1 通过scsi_done回调完成SCSI命令 +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +对于所有非错误处理（EH）命令，scsi_done()是其完成回调 +函数。它只调用blk_mq_complete_request()来删除块层的 +定时器并触发块设备软中断（BLOCK_SOFTIRQ）。 + +BLOCK_SOFTIRQ会间接调用scsi_complete()，进而调用 +scsi_decide_disposition()来决定如何处理该命令。 +scsi_decide_disposition()会查看scmd->result值和感 +应码数据来决定如何处理命令。 + + - SUCCESS + + 调用scsi_finish_command()来处理该命令。该函数会 + 执行一些维护操作，然后调用scsi_io_completion()来 + 完成I/O操作。scsi_io_completion()会通过调用 + blk_end_request及其相关函数来通知块层该请求已完成， + 如果发生错误，还会判断如何处理剩余的数据。 + + - NEEDS_RETRY + + - ADD_TO_MLQUEUE + + scmd被重新加入到块设备队列中。 + + - otherwise + + 调用scsi_eh_scmd_add(scmd)来处理该命令。 + 关于此函数的详细信息，请参见 [1-3]。 + + +1.2.2 scmd超时完成机制 +^^^^^^^^^^^^^^^^^^^^^^ + +SCSI命令超时处理机制由scsi_timeout()函数实现。 +当发生超时事件时，该函数 + + 1. 首先调用可选的hostt->eh_timed_out()回调函数。 + 返回值可能是以下3种情况之一： + + - ``SCSI_EH_RESET_TIMER`` + 表示需要延长命令执行时间并重启计时器。 + + - ``SCSI_EH_NOT_HANDLED`` + 表示eh_timed_out()未处理该命令。 + 此时将执行第2步的处理流程。 + + - ``SCSI_EH_DONE`` + 表示eh_timed_out()已完成该命令。 + + 2. 若未通过回调函数解决，系统将调用 + scsi_abort_command()发起异步中止操作，该操作最多 + 可执行scmd->allowed + 1次。但存在三种例外情况会跳 + 过异步中止而直接进入第3步处理：当检测到 + SCSI_EH_ABORT_SCHEDULED标志位已置位（表明该命令先 + 前已被中止过一次且当前重试仍失败）、当重试次数已达上 + 限、或当错误处理时限已到期时。在这些情况下，系统将跳 + 过异步中止流程而直接执行第3步处理方案。 + + 3. 最终未解决的命令会通过scsi_eh_scmd_add(scmd)移交给 + 错误处理子系统，具体流程详见[1-4]章节说明。 + +1.3 异步命令中止机制 +-------------------- + +当命令超时触发后，系统会通过scsi_abort_command()调度异 +步中止操作。若中止操作执行成功，则根据重试次数决定后续处 +理：若未达最大重试限制，命令将重新下发执行；若重试次数已 +耗尽，则命令最终以DID_TIME_OUT状态终止。当中止操作失败 +时，系统会调用scsi_eh_scmd_add()将该命令移交错误处理子 +系统，具体处理流程详见[1-4]。 + +1.4 错误处理(EH)接管机制 +------------------------ + +SCSI命令通过scsi_eh_scmd_add()函数进入错误处理流程，该函 +数执行以下操作： + + 1. 将scmd->eh_entry链接到shost->eh_cmd_q + + 2. 在shost->shost_state中设置SHOST_RECOVERY状态位 + + 3. 递增shost->host_failed失败计数器 + + 4. 当检测到shost->host_busy == shost->host_failed + 时（即所有进行中命令均已失败）立即唤醒SCSI错误处理 + 线程。 + +如上所述，当任一scmd被加入到shost->eh_cmd_q队列时，系统 +会立即置位shost_state中的SHOST_RECOVERY状态标志位，该操 +作将阻止块层向对应主机控制器下发任何新的SCSI命令。在此状 +态下，主机控制器上所有正在处理的scmd最终会进入以下三种状 +态之一：正常完成、失败后被移入到eh_cmd_q队列、或因超时被 +添加到shost->eh_cmd_q队列。 + +如果所有的SCSI命令都已经完成或失败，系统中正在执行的命令 +数量与失败命令数量相等（ +即shost->host_busy == shost->host_failed），此时将唤 +醒SCSI错误处理线程。SCSI错误处理线程一旦被唤醒，就可以确 +保所有未完成命令均已标记为失败状态，并且已经被链接到 +shost->eh_cmd_q队列中。 + +需要特别说明的是，这并不意味着底层处理流程完全静止。当底层 +驱动以错误状态完成某个scmd时，底层驱动及其下层组件会立刻遗 +忘该命令的所有关联状态。但对于超时命令，除非 +hostt->eh_timed_out()回调函数已经明确通知底层驱动丢弃该 +命令（当前所有底层驱动均未实现此功能），否则从底层驱动视角 +看该命令仍处于活跃状态，理论上仍可能在某时刻完成。当然，由 +于超时计时器早已触发，所有此类延迟完成都将被系统直接忽略。 + +我们将在后续章节详细讨论关于SCSI错误处理如何执行中止操作（ +即强制底层驱动丢弃已超时SCSI命令）。 + + +2. SCSI错误处理机制详解 +======================= + +SCSI底层驱动可以通过以下两种方式之一来实现SCSI错误处理。 + + - 细粒度的错误处理回调机制 + 底层驱动可选择实现细粒度的错误处理回调函数，由SCSI中间层 + 主导错误恢复流程并自动调用对应的回调函数。此实现模式的详 + 细设计规范在[2-1]节中展开讨论。 + + - eh_strategy_handler()回调函数 + 该回调函数作为统一的错误处理入口，需要完整实现所有的恢复 + 操作。具体而言，它必须涵盖SCSI中间层在常规恢复过程中执行 + 的全部处理流程，相关实现将在[2-2]节中详细描述。 + +当错误恢复流程完成后，SCSI错误处理系统通过调用 +scsi_restart_operations()函数恢复正常运行，该函数按顺序执行 +以下操作： + + 1. 验证是否需要执行驱动器安全门锁定机制 + + 2. 清除shost_state中的SHOST_RECOVERY状态标志位 + + 3. 唤醒所有在shost->host_wait上等待的任务。如果有人调用了 + scsi_block_when_processing_errors()则会发生这种情况。 + （疑问：由于错误处理期间块层队列已被阻塞，为何仍需显式 + 唤醒？） + + 4. 强制激活该主机控制器下所有设备的I/O队列 + + +2.1 基于细粒度回调的错误处理机制 +-------------------------------- + +2.1.1 概述 +^^^^^^^^^^^ + +如果不存在eh_strategy_handler()，SCSI中间层将负责驱动的 +错误处理。错误处理（EH）的目标有两个：一是让底层驱动程序、 +主机和设备不再维护已超时的SCSI命令（scmd）；二是使他们准备 +好接收新命令。当一个SCSI命令（scmd）被底层遗忘且底层已准备 +好再次处理或拒绝该命令时，即可认为该scmd已恢复。 + +为实现这些目标，错误处理（EH）会逐步执行严重性递增的恢复 +操作。部分操作通过下发SCSI命令完成，而其他操作则通过调用 +以下细粒度的错误处理回调函数实现。这些回调函数可以省略， +若被省略则默认始终视为执行失败。 + +:: + + int (* eh_abort_handler)(struct scsi_cmnd *); + int (* eh_device_reset_handler)(struct scsi_cmnd *); + int (* eh_bus_reset_handler)(struct scsi_cmnd *); + int (* eh_host_reset_handler)(struct scsi_cmnd *); + +只有在低级别的错误恢复操作无法恢复部分失败的SCSI命令 +（scmd）时，才会采取更高级别的恢复操作。如果最高级别的错误 +处理失败，就意味着整个错误恢复（EH）过程失败，所有未能恢复 +的设备被强制下线。 + +在恢复过程中，需遵循以下规则： + + - 错误恢复操作针对待处理列表eh_work_q中的失败的scmds执 + 行。如果某个恢复操作成功恢复了一个scmd，那么该scmd会 + 从eh_work_q链表中移除。 + + 需要注意的是，对某个scmd执行的单个恢复操作可能会恢复 + 多个scmd。例如，对某个设备执行复位操作可能会恢复该设 + 备上所有失败的scmd。 + + - 仅当低级别的恢复操作完成且eh_work_q仍然非空时，才会 + 触发更高级别的操作 + + - SCSI错误恢复机制会重用失败的scmd来发送恢复命令。对于 + 超时的scmd，SCSI错误处理机制会确保底层驱动在重用scmd + 前已不再维护该命令。 + +当一个SCSI命令（scmd）被成功恢复后，错误处理逻辑会通过 +scsi_eh_finish_cmd()将其从待处理队列（eh_work_q）移 +至错误处理的本地完成队列（eh_done_q）。当所有scmd均恢 +复完成（即eh_work_q为空时），错误处理逻辑会调用 +scsi_eh_flush_done_q()对这些已恢复的scmd进行处理，即 +重新尝试或错误总终止（向上层通知失败）。 + +SCSI命令仅在满足以下全部条件时才会被重试：对应的SCSI设 +备仍处于在线状态，未设置REQ_FAILFAST标志或递增后的 +scmd->retries值仍小于scmd->allowed。 + +2.1.2 SCSI命令在错误处理过程中的流转路径 +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + 1. 错误完成/超时 + + :处理: 调用scsi_eh_scmd_add()处理scmd + + - 将scmd添加到shost->eh_cmd_q + - 设置SHOST_RECOVERY标记位 + - shost->host_failed++ + + :锁要求: shost->host_lock + + 2. 启动错误处理（EH） + + :操作: 将所有scmd移动到EH本地eh_work_q队列，并 + 清空 shost->eh_cmd_q。 + + :锁要求: shost->host_lock（非严格必需，仅为保持一致性） + + 3. scmd恢复 + + :操作: 调用scsi_eh_finish_cmd()完成scmd的EH + + - 将scmd从本地eh_work_q队列移至本地eh_done_q队列 + + :锁要求: 无 + + :并发控制: 每个独立的eh_work_q至多一个线程，确保无锁 + 队列的访问 + + 4. EH完成 + + :操作: 调用scsi_eh_flush_done_q()重试scmd或通知上层处理 + 失败。此函数可以被并发调用，但每个独立的eh_work_q队 + 列至多一个线程，以确保无锁队列的访问。 + + - 从eh_done_q队列中移除scmd，清除scmd->eh_entry + - 如果需要重试，调用scsi_queue_insert()重新入队scmd + - 否则，调用scsi_finish_command()完成scmd + - 将shost->host_failed置为零 + + :锁要求: 队列或完成函数会执行适当的加锁操作 + + +2.1.3 控制流 +^^^^^^^^^^^^ + + 通过细粒度回调机制执行的SCSI错误处理（EH）是从 + scsi_unjam_host()函数开始的 + +``scsi_unjam_host`` + + 1. 持有shost->host_lock锁，将shost->eh_cmd_q中的命令移动 + 到本地的eh_work_q队里中，并释放host_lock锁。注意，这一步 + 会清空shost->eh_cmd_q。 + + 2. 调用scsi_eh_get_sense函数。 + + ``scsi_eh_get_sense`` + + 该操作针对没有有效感知数据的错误完成命令。大部分SCSI传输协议 + 或底层驱动在命令失败时会自动获取感知数据（自动感知）。出于性 + 能原因，建议使用自动感知，推荐使用自动感知机制，因为它不仅有 + 助于提升性能，还能避免从发生CHECK CONDITION到执行本操作之间， + 感知信息出现不同步的问题。 + + 注意，如果不支持自动感知，那么在使用scsi_done()以错误状态完成 + scmd 时，scmd->sense_buffer将包含无效感知数据。在这种情况下， + scsi_decide_disposition()总是返回FAILED从而触发SCSI错误处理 + （EH）。当该scmd执行到这里时，会重新获取感知数据，并再次调用 + scsi_decide_disposition()进行处理。 + + 1. 调用scsi_request_sense()发送REQUEST_SENSE命令。如果失败， + 则不采取任何操作。请注意，不采取任何操作会导致对该scmd执行 + 更高级别的恢复操作。 + + 2. 调用scsi_decide_disposition()处理scmd + + - SUCCESS + scmd->retries被设置为scmd->allowed以防止 + scsi_eh_flush_done_q()重试该scmd，并调用 + scsi_eh_finish_cmd()。 + + - NEEDS_RETRY + 调用scsi_eh_finish_cmd() + + - 其他情况 + 无操作。 + + 4. 如果!list_empty(&eh_work_q)，则调用scsi_eh_ready_devs()。 + + ``scsi_eh_ready_devs`` + + 该函数采取四种逐步增强的措施，使失败的设备准备好处理新的命令。 + + 1. 调用scsi_eh_stu() + + ``scsi_eh_stu`` + + 对于每个具有有效感知数据且scsi_check_sense()判断为失败的 + scmd发送START STOP UNIT（STU）命令且将start置1。注意，由 + 于我们明确选择错误完成的scmd，可以确定底层驱动已不再维护该 + scmd，我们可以重用它进行STU。 + + 如果STU操作成功且sdev处于离线或就绪状态，所有在sdev上失败的 + scmd都会通过scsi_eh_finish_cmd()完成。 + + *注意* 如果hostt->eh_abort_handler()未实现或返回失败，可能 + 此时仍有超时的scmd，此时STU不会导致底层驱动不再维护scmd。但 + 是，如果STU执行成功，该函数会通过scsi_eh_finish_cmd()来完成 + sdev上的所有scmd，这会导致底层驱动处于不一致的状态。看来STU + 操作应仅在sdev不包含超时scmd时进行。 + + 2. 如果!list_empty(&eh_work_q)，调用scsi_eh_bus_device_reset()。 + + ``scsi_eh_bus_device_reset`` + + 此操作与scsi_eh_stu()非常相似，区别在于使用 + hostt->eh_device_reset_handler()替代STU命令。此外，由于我们 + 没有发送SCSI命令且重置会清空该sdev上所有的scmd，所以无需筛选错 + 误完成的scmd。 + + 3. 如果!list_empty(&eh_work_q)，调用scsi_eh_bus_reset()。 + + ``scsi_eh_bus_reset`` + + 对于每个包含失败scmd的SCSI通道调用 + hostt->eh_bus_reset_handler()。如果总线重置成功，那么该通道上 + 所有准备就绪或离线状态sdev上的失败scmd都会被处理处理完成。 + + 4. 如果!list_empty(&eh_work_q)，调用scsi_eh_host_reset()。 + + ``scsi_eh_host_reset`` + + 调用hostt->eh_host_reset_handler()是最终的手段。如果SCSI主机 + 重置成功，主机上所有就绪或离线sdev上的失败scmd都会通过错误处理 + 完成。 + + 5. 如果!list_empty(&eh_work_q)，调用scsi_eh_offline_sdevs()。 + + ``scsi_eh_offline_sdevs`` + + 离线所有包含未恢复scmd的所有sdev，并通过 + scsi_eh_finish_cmd()完成这些scmd。 + + 5. 调用scsi_eh_flush_done_q()。 + + ``scsi_eh_flush_done_q`` + + 此时所有的scmd都已经恢复（或放弃），并通过 + scsi_eh_finish_cmd()函数加入eh_done_q队列。该函数通过 + 重试或显示通知上层scmd的失败来刷新eh_done_q。 + + +2.2 基于transportt->eh_strategy_handler()的错误处理机制 +------------------------------------------------------------- + +在该机制中，transportt->eh_strategy_handler()替代 +scsi_unjam_host()的被调用，并负责整个错误恢复过程。该处理 +函数完成后应该确保底层驱动不再维护任何失败的scmd并且将设备 +设置为就绪（准备接收新命令）或离线状态。此外，该函数还应该 +执行SCSI错误处理的维护任务，以维护SCSI中间层的数据完整性。 +换句话说，eh_strategy_handler()必须实现[2-1-2]中除第1步 +外的所有步骤。 + + +2.2.1 transportt->eh_strategy_handler()调用前的SCSI中间层状态 +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + 进入该处理函数时，以下条件成立。 + + - 每个失败的scmd的eh_flags字段已正确设置。 + + - 每个失败的scmd通过scmd->eh_entry链接到scmd->eh_cmd_q队列。 + + - 已设置SHOST_RECOVERY标志。 + + - `shost->host_failed == shost->host_busy`。 + +2.2.2 transportt->eh_strategy_handler()调用后的SCSI中间层状态 +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + 从该处理函数退出时，以下条件成立。 + + - shost->host_failed为零。 + + - shost->eh_cmd_q被清空。 + + - 每个scmd->eh_entry被清空。 + + - 对每个scmd必须调用scsi_queue_insert()或scsi_finish_command()。 + 注意，该处理程序可以使用scmd->retries（剩余重试次数）和 + scmd->allowed（允许重试次数）限制重试次数。 + + +2.2.3 注意事项 +^^^^^^^^^^^^^^ + + - 需明确已超时的scmd在底层仍处于活跃状态，因此在操作这些 + scmd前，必须确保底层已彻底不再维护。 + + - 访问或修改shost数据结构时，必须持有shost->host_lock锁 + 以维持数据一致性。 + + - 错误处理完成后，每个故障设备必须彻底清除所有活跃SCSI命 + 令（scmd）的关联状态。 + + - 错误处理完成后，每个故障设备必须被设置为就绪（准备接收 + 新命令）或离线状态。 + + +Tejun Heo +htejun@gmail.com + +11th September 2005 diff --git a/Documentation/translations/zh_CN/scsi/scsi_mid_low_api.rst b/Documentation/translations/zh_CN/scsi/scsi_mid_low_api.rst new file mode 100644 index 00000000000000..f701945a1b1ccc --- /dev/null +++ b/Documentation/translations/zh_CN/scsi/scsi_mid_low_api.rst @@ -0,0 +1,1174 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/scsi/scsi_mid_low_api.rst + +:翻译: + + 郝栋栋 doubled + +:校译: + + + +========================= +SCSI中间层 — 底层驱动接口 +========================= + +简介 +==== +本文档概述了Linux SCSI中间层与SCSI底层驱动之间的接口。底层 +驱动（LLD）通常被称为主机总线适配器（HBA）驱动或主机驱动 +（HD）。在该上下文中，“主机”指的是计算机IO总线（例如：PCI总 +线或ISA总线）与SCSI传输层中单个SCSI启动器端口之间的桥梁。 +“启动器”端口（SCSI术语，参考SAM-3：http://www.t10.org）向 +“目标”SCSI端口（例如：磁盘）发送SCSI命令。在一个运行的系统 +中存在多种底层驱动（LLDs），但每种硬件类型仅对应一种底层驱动 +（LLD）。大多数底层驱动可以控制一个或多个SCSI HBA。部分HBA +内部集成多个主机控制器。 + +在某些情况下，SCSI传输层本身是已存在于Linux中的外部总线子系 +统（例如：USB和ieee1394）。在此类场景下，SCSI子系统的底层驱 +动将作为与其他驱动子系统的软件桥接层。典型示例包括 +usb-storage驱动（位于drivers/usb/storage目录）以 +及ieee1394/sbp2驱动（位于 drivers/ieee1394 目录）。 + +例如，aic7xxx底层驱动负责控制基于Adaptec公司7xxx芯片系列的 +SCSI并行接口（SPI）控制器。aic7xxx底层驱动可以内建到内核中 +或作为模块加载。一个Linux系统中只能运行一个aic7xxx底层驱动 +程序，但他可能控制多个主机总线适配器（HBA）。这些HBA可能位于 +PCI扩展卡或内置于主板中（或两者兼有）。某些基于aic7xxx的HBA +采用双控制器设计，因此会呈现为两个SCSI主机适配器。与大多数现 +代HBA相同，每个aic7xxx控制器都拥有其独立的PCI设备地址。[SCSI +主机与PCI设备之间一一对应虽然常见，但并非强制要求（例如ISA适 +配器就不适用此规则）。] + +SCSI中间层将SCSI底层驱动（LLD）与其他层（例如SCSI上层驱动以 +及块层）隔离开来。 + +本文档的版本大致与Linux内核2.6.8相匹配。 + +文档 +==== +内核源码树中设有专用的SCSI文档目录，通常位于 +Documentation/scsi目录下。大多数文档采用 +reStructuredText格式。本文档名为 +scsi_mid_low_api.rst，可在该目录中找到。该文档的最新版本可 +以访问 https://docs.kernel.org/scsi/scsi_mid_low_api.html +查阅。许多底层驱动（LLD）的文档也位于Documentation/scsi目录 +下（例如aic7xxx.rst）。SCSI中间层的简要说明见scsi.rst文件， +该文档包含指向Linux Kernel 2.4系列SCSI子系统的文档链接。此 +外还收录了两份SCSI上层驱动文档：st.rst（SCSI磁带驱动）与 +scsi-generic.rst（用通用SCSI（sg）驱动）。 + +部分底层驱动的文档（或相关URL）可能嵌在C源代码文件或与其 +源码同位于同一目录下。例如，USB大容量存储驱动的文档链接可以在 +目录/usr/src/linux/drivers/usb/storage下找到。 + +驱动程序结构 +============ +传统上，SCSI子系统的底层驱动（LLD）至少包含drivers/scsi +目录下的两个文件。例如，一个名为“xyz”的驱动会包含一个头文件 +xyz.h和一个源文件xyz.c。[实际上所有代码完全可以合并为单个 +文件，头文件并非必需的。] 部分需要跨操作系统移植的底层驱动会 +采用更复杂的文件结构。例如，aic7xxx驱动，就为通用代码与操作 +系统专用代码（如FreeBSD和Linux）分别创建了独立的文件。此类 +驱动通常会在drivers/scsi目录下拥有自己单独的子目录。 + +当需要向Linux内核添加新的底层驱动（LLD）时，必须留意 +drivers/scsi目录下的两个文件：Makefile以及Kconfig。建议参 +考现有底层驱动的代码组织方式。 + +随着Linux内核2.5开发内核逐步演进为2.6系列的生产版本，该接口 +也引入了一些变化。以驱动初始化代码为例，现有两种模型可用。其 +中旧模型与Linux内核2.4的实现相似，他基于在加载HBA驱动时检测 +到的主机，被称为“被动（passive）”初始化模型。而新的模型允许 +在底层驱动（LLD）的生命周期内动态拔插HBA，这种方式被称为“热 +插拔（hotplug）”初始化模型。推荐使用新的模型，因为他既能处理 +传统的永久连接SCSI设备，也能处理现代支持热插拔的类SCSI设备 +（例如通过USB或IEEE 1394连接的数码相机）。这两种初始化模型将 +在后续的章节中分别讨论。 + +SCSI底层驱动（LLD）通过以下3种方式与SCSI子系统进行交互： + + a) 直接调用由SCSI中间层提供的接口函数 + b) 将一组函数指针传递给中间层提供的注册函数，中间层将在 + 后续运行的某个时刻调用这些函数。这些函数由LLD实现。 + c) 直接访问中间层维护的核心数据结构 + +a）组中所涉及的所有函数，均列于下文“中间层提供的函数”章节中。 + +b）组中涉及的所有函数均列于下文名为“接口函数”的章节中。这些 +函数指针位于结构体struct scsi_host_template中，该结构体实 +例会被传递给scsi_host_alloc()。对于LLD未实现的接口函数，应 +对struct scsi_host_template中的对应成员赋NULL。如果在文件 +作用域定义一个struct scsi_host_template的实例，没有显式初 +始化的函数指针成员将自动设置为NULL。 + +c）组中提到的用法在“热插拔”环境中尤其需要谨慎处理。LLD必须 +明确知晓这些与中间层及其他层级共享的数据结构的生命周期。 + +LLD中定义的所有函数以及在文件作用域内定义的所有数据都应声明 +为static。例如，在一个名为“xxx”的LLD中的sdev_init()函数定 +义如下： +``static int xxx_sdev_init(struct scsi_device * sdev) { /* code */ }`` + +热插拔初始化模型 +================ +在该模型中，底层驱动（LLD）控制SCSI主机适配器在子系统中的注 +册与注销时机。主机最早可以在驱动初始化阶段被注册，最晚可以在 +驱动卸载时被移除。通常，驱动会响应来自sysfs probe()的回调， +表示已检测到一个主机总线适配器（HBA）。在确认该新设备是LLD的 +目标设备后，LLD初始化HBA，并将一个新的SCSI主机适配器注册到 +SCSI中间层。 + +在LLD初始化过程中，驱动应当向其期望发现HBA的IO总线（例如PCI +总线）进行注册。该操作通常可以通过sysfs完成。任何驱动参数（ +特别是那些在驱动加载后仍可修改的参数）也可以在此时通过sysfs +注册。当LLD注册其首个HBA时，SCSI中间层首次感受到该LLD的存在。 + +在稍后的某个时间点，当LLD检测到新的HBA时，接下来在LLD与SCSI +中间层之间会发生一系列典型的调用过程。该示例展示了中间层如何 +扫描新引入的HBA，在该过程中发现了3个SCSI设备，其中只有前两个 +设备有响应:: + + HBA探测：假设在扫描中发现2个SCSI设备 + 底层驱动 中间层 底层驱动 + =======---------------======---------------======= + scsi_host_alloc() --> + scsi_add_host() ----> + scsi_scan_host() -------+ + | + sdev_init() + sdev_configure() --> scsi_change_queue_depth() + | + sdev_init() + sdev_configure() + | + sdev_init() *** + sdev_destroy() *** + + + *** 对于SCSI中间层尝试扫描但未响应的SCSI设备，系统调用 + sdev_init()和sdev_destroy()函数对。 + +如果LLD期望调整默认队列设置，可以在其sdev_configure()例程 +中调用scsi_change_queue_depth()。 + +当移除一个HBA时，可能是由于卸载LLD模块相关的有序关闭（例如通 +过rmmod命令），也可能是由于sysfs的remove()回调而触发的“热拔 +插”事件。无论哪种情况，其执行顺序都是相同的:: + + HBA移除：假设连接了2个SCSI设备 + 底层驱动 中间层 底层驱动 + =======---------------------======-----------------======= + scsi_remove_host() ---------+ + | + sdev_destroy() + sdev_destroy() + scsi_host_put() + +LLD用于跟踪struct Scsi_Host的实例可能会非常有用 +（scsi_host_alloc()返回的指针）。这些实例由中间层“拥有”。 +当引用计数为零时，struct Scsi_Host实例会被 +scsi_host_put()释放。 + +HBA的热插拔是一个特殊的场景，特别是当HBA下的磁盘正在处理已挂 +载文件系统上的SCSI命令时。为了应对其中的诸多问题，中间层引入 +了引用计数逻辑。具体内容参考下文关于引用计数的章节。 + +热插拔概念同样适用于SCSI设备。目前，当添加HBA时， +scsi_scan_host() 函数会扫描该HBA所属SCSI传输通道上的设备。在 +新型SCSI传输协议中，HBA可能在扫描完成后才检测到新的SCSI设备。 +LLD可通过以下步骤通知中间层新SCSI设备的存在:: + + SCSI设备热插拔 + 底层驱动 中间层 底层驱动 + =======-------------------======-----------------======= + scsi_add_device() ------+ + | + sdev_init() + sdev_configure() [--> scsi_change_queue_depth()] + +类似的，LLD可能会感知到某个SCSI设备已经被移除（拔出）或与他的连 +接已中断。某些现有的SCSI传输协议（例如SPI）可能直到后续SCSI命令 +执行失败时才会发现设备已经被移除，中间层会将该设备设置为离线状态。 +若LLD检测到SCSI设备已经被移除，可通过以下流程触发上层对该设备的 +移除操作:: + + SCSI设备热拔插 + 底层驱动 中间层 底层驱动 + =======-------------------======-----------------======= + scsi_remove_device() -------+ + | + sdev_destroy() + +对于LLD而言，跟踪struct scsi_device实例可能会非常有用（该结构 +的指针会作为参数传递给sdev_init()和sdev_configure()回调函数）。 +这些实例的所有权归属于中间层（mid-level）。struct scsi_device +实例在sdev_destroy()执行后释放。 + +引用计数 +======== +Scsi_Host结构体已引入引用计数机制。该机制将struct Scsi_Host +实例的所有权分散到使用他的各SCSI层，而此前这类实例完全由中间 +层独占管理。底层驱动（LLD）通常无需直接操作这些引用计数，仅在 +某些特定场景下可能需要介入。 + +与struct Scsi_Host相关的引用计数函数主要有以下3种： + + - scsi_host_alloc(): + 返回指向新实例的指针，该实例的引用计数被设置为1。 + + - scsi_host_get(): + 给定实例的引用计数加1。 + + - scsi_host_put(): + 给定实例的引用计数减1。如果引用计数减少到0，则释放该实例。 + +scsi_device结构体现已引入引用计数机制。该机制将 +struct scsi_device实例的所有权分散到使用他的各SCSI层，而此 +前这类实例完全由中间层独占管理。相关访问函数声明详见 +include/scsi/scsi_device.h文件末尾部分。若LLD需要保留 +scsi_device实例的指针副本，则应调用scsi_device_get()增加其 +引用计数；不再需要该指针时，可通过scsi_device_put()递减引用 +计数（该操作可能会导致该实例被释放）。 + +.. Note:: + + struct Scsi_Host实际上包含两个并行维护的引用计数器，该引 + 用计数由这些函数共同操作。 + +编码规范 +======== + +首先，Linus Torvalds关于C语言编码风格的观点可以在 +Documentation/process/coding-style.rst文件中找到。 + +此外，在相关gcc编译器支持的前提下，鼓励使用大多数C99标准的增强 +特性。因此，在适当的情况下鼓励使用C99风格的结构体和数组初始化 +方式。但不要过度使用，目前对可变长度数组（VLA）的支持还待完善。 +一个例外是 ``//`` 风格的注释；在Linux中倾向于使 +用 ``/*...*/`` 注释格式。 + +对于编写良好、经过充分测试且有完整文档的代码不需要重新格式化 +以符合上述规范。例如，aic7xxx驱动是从FreeBSD和Adaptec代码库 +移植到Linux的。毫无疑问，FreeBSD和Adaptec遵循其原有的编码规 +范。 + + +中间层提供的函数 +================ +这些函数由SCSI中间层提供，供底层驱动（LLD）调用。这些函数的名 +称（即入口点）均已导出，因此作为模块加载的LLD可以访问他们。内 +核会确保在任何LLD初始化之前，SCSI中间层已先行加载并完成初始化。 +下文按字母顺序列出这些函数，其名称均以 ``scsi_`` 开头。 + +摘要： + + - scsi_add_device - 创建新的SCSI逻辑单元（LU）设备实例 + - scsi_add_host - 执行sysfs注册并设置传输类 + - scsi_change_queue_depth - 调整SCSI设备队列深度 + - scsi_bios_ptable - 返回块设备分区表的副本 + - scsi_block_requests - 阻止向指定主机提交新命令 + - scsi_host_alloc - 分配引用计数为1的新SCSI主机适配器实例scsi_host + - scsi_host_get - 增加SCSI主机适配器实例的引用计数 + - scsi_host_put - 减少SCSI主机适配器的引用计数（归零时释放） + - scsi_remove_device - 卸载并移除SCSI设备 + - scsi_remove_host - 卸载并移除主机控制器下的所有SCSI设备 + - scsi_report_bus_reset - 报告检测到的SCSI总线复位事件 + - scsi_scan_host - 执行SCSI总线扫描 + - scsi_track_queue_full - 跟踪连续出现的队列满事件 + - scsi_unblock_requests - 恢复向指定主机提交命令 + +详细信息:: + + /** + * scsi_add_device - 创建新的SCSI逻辑单元（LU）设备实例 + * @shost: 指向SCSI主机适配器实例的指针 + * @channel: 通道号（通常为0） + * @id: 目标ID号 + * @lun: 逻辑单元号（LUN） + * + * 返回指向新的struct scsi_device实例的指针， + * 如果出现异常（例如在给定地址没有设备响应），则返 + * 回ERR_PTR(-ENODEV) + * + * 是否阻塞：是 + * + * 注意事项：本函数通常在添加HBA的SCSI总线扫描过程 + * 中由系统内部调用（即scsi_scan_host()执行期间）。因此， + * 仅应在以下情况调用：HBA在scsi_scan_host()完成扫描后， + * 又检测到新的SCSI设备（逻辑单元）。若成功执行，本次调用 + * 可能会触发LLD的以下回调函数：sdev_init()以及 + * sdev_configure() + * + * 函数定义：drivers/scsi/scsi_scan.c + **/ + struct scsi_device * scsi_add_device(struct Scsi_Host *shost, + unsigned int channel, + unsigned int id, unsigned int lun) + + + /** + * scsi_add_host - 执行sysfs注册并设置传输类 + * @shost: 指向SCSI主机适配器实例的指针 + * @dev: 指向scsi类设备结构体（struct device）的指针 + * + * 成功返回0，失败返回负的errno（例如：-ENOMEM） + * + * 是否阻塞：否 + * + * 注意事项：仅在“热插拔初始化模型”中需要调用，且必须在 + * scsi_host_alloc()成功执行后调用。该函数不会扫描总线； + * 总线扫描可通过调用scsi_scan_host()或其他传输层特定的 + * 方法完成。在调用该函数之前，LLD必须先设置好传输模板， + * 并且只能在调用该函数之后才能访问传输类 + * （transport class）相关的数据结构。 + * + * 函数定义：drivers/scsi/hosts.c + **/ + int scsi_add_host(struct Scsi_Host *shost, struct device * dev) + + + /** + * scsi_change_queue_depth - 调整SCSI设备队列深度 + * @sdev: 指向要更改队列深度的SCSI设备的指针 + * @tags 如果启用了标记队列，则表示允许的标记数， + * 或者在非标记模式下，LLD可以排队的命令 + * 数（如 cmd_per_lun）。 + * + * 无返回 + * + * 是否阻塞：否 + * + * 注意事项：可以在任何时刻调用该函数，只要该SCSI设备受该LLD控 + * 制。[具体来说，可以在sdev_configure()执行期间或之后，且在 + * sdev_destroy()执行之前调用。] 该函数可安全地在中断上下文中 + * 调用。 + * + * 函数定义：drivers/scsi/scsi.c [更多注释请参考源代码] + **/ + int scsi_change_queue_depth(struct scsi_device *sdev, int tags) + + + /** + * scsi_bios_ptable - 返回块设备分区表的副本 + * @dev: 指向块设备的指针 + * + * 返回指向分区表的指针，失败返回NULL + * + * 是否阻塞：是 + * + * 注意事项：调用方负责释放返回的内存（通过 kfree() 释放） + * + * 函数定义：drivers/scsi/scsicam.c + **/ + unsigned char *scsi_bios_ptable(struct block_device *dev) + + + /** + * scsi_block_requests - 阻止向指定主机提交新命令 + * + * @shost: 指向特定主机的指针，用于阻止命令的发送 + * + * 无返回 + * + * 是否阻塞：否 + * + * 注意事项：没有定时器或其他任何机制可以解除阻塞，唯一的方式 + * 是由LLD调用scsi_unblock_requests()方可恢复。 + * + * 函数定义：drivers/scsi/scsi_lib.c + **/ + void scsi_block_requests(struct Scsi_Host * shost) + + + /** + * scsi_host_alloc - 创建SCSI主机适配器实例并执行基础初始化 + * @sht: 指向SCSI主机模板的指针 + * @privsize: 在hostdata数组中分配的额外字节数（该数组是返 + * 回的Scsi_Host实例的最后一个成员） + * + * 返回指向新的Scsi_Host实例的指针，失败返回NULL + * + * 是否阻塞：是 + * + * 注意事项：当此调用返回给LLD时，该主机适配器上的 + * SCSI总线扫描尚未进行。hostdata数组（默认长度为 + * 零）是LLD专属的每主机私有区域，供LLD独占使用。 + * 两个相关的引用计数都被设置为1。完整的注册（位于 + * sysfs）与总线扫描由scsi_add_host()和 + * scsi_scan_host()稍后执行。 + * 函数定义：drivers/scsi/hosts.c + **/ + struct Scsi_Host * scsi_host_alloc(const struct scsi_host_template * sht, + int privsize) + + + /** + * scsi_host_get - 增加SCSI主机适配器实例的引用计数 + * @shost: 指向Scsi_Host实例的指针 + * + * 无返回 + * + * 是否阻塞：目前可能会阻塞，但可能迭代为不阻塞 + * + * 注意事项：会同时增加struct Scsi_Host中两个子对 + * 象的引用计数 + * + * 函数定义：drivers/scsi/hosts.c + **/ + void scsi_host_get(struct Scsi_Host *shost) + + + /** + * scsi_host_put - 减少SCSI主机适配器实例的引用计数 + * （归零时释放） + * @shost: 指向Scsi_Host实例的指针 + * + * 无返回 + * + * 是否阻塞：当前可能会阻塞，但可能会改为不阻塞 + * + * 注意事项：实际会递减两个子对象中的计数。当后一个引用 + * 计数归零时系统会自动释放Scsi_Host实例。 + * LLD 无需关注Scsi_Host实例的具体释放时机，只要在平衡 + * 引用计数使用后不再访问该实例即可。 + * 函数定义：drivers/scsi/hosts.c + **/ + void scsi_host_put(struct Scsi_Host *shost) + + + /** + * scsi_remove_device - 卸载并移除SCSI设备 + * @sdev: 指向SCSI设备实例的指针 + * + * 返回值：成功返回0，若设备未连接，则返回-EINVAL + * + * 是否阻塞：是 + * + * 如果LLD发现某个SCSI设备（逻辑单元，lu）已经被移除， + * 但其主机适配器实例依旧存在，则可以请求移除该SCSI设备。 + * 如果该调用成功将触发sdev_destroy()回调函数的执行。调 + * 用完成后，sdev将变成一个无效的指针。 + * + * 函数定义：drivers/scsi/scsi_sysfs.c + **/ + int scsi_remove_device(struct scsi_device *sdev) + + + /** + * scsi_remove_host - 卸载并移除主机控制器下的所有SCSI设备 + * @shost: 指向SCSI主机适配器实例的指针 + * + * 返回值：成功返回0，失败返回1（例如：LLD正忙？？） + * + * 是否阻塞：是 + * + * 注意事项：仅在使用“热插拔初始化模型”时调用。应在调用 + * scsi_host_put()前调用。 + * + * 函数定义：drivers/scsi/hosts.c + **/ + int scsi_remove_host(struct Scsi_Host *shost) + + + /** + * scsi_report_bus_reset - 报告检测到的SCSI总线复位事件 + * @shost: 指向关联的SCSI主机适配器的指针 + * @channel: 发生SCSI总线复位的通道号 + * + * 返回值：无 + * + * 是否阻塞：否 + * + * 注意事项：仅当复位来自未知来源时才需调用此函数。 + * 由SCSI中间层发起的复位无需调用，但调用也不会导 + * 致副作用。此函数的主要作用是确保系统能正确处理 + * CHECK_CONDITION状态。 + * + * 函数定义：drivers/scsi/scsi_error.c + **/ + void scsi_report_bus_reset(struct Scsi_Host * shost, int channel) + + + /** + * scsi_scan_host - 执行SCSI总线扫描 + * @shost: 指向SCSI主机适配器实例的指针 + * + * 是否阻塞：是 + * + * 注意事项：应在调用scsi_add_host()后调用 + * + * 函数定义：drivers/scsi/scsi_scan.c + **/ + void scsi_scan_host(struct Scsi_Host *shost) + + + /** + * scsi_track_queue_full - 跟踪指定设备上连续的QUEUE_FULL + * 事件，以判断是否需要及何时调整 + * 该设备的队列深度。 + * @sdev: 指向SCSI设备实例的指针 + * @depth: 当前该设备上未完成的SCSI命令数量（不包括返回 + * QUEUE_FULL的命令） + * + * 返回值：0 - 当前队列深度无需调整 + * >0 - 需要将队列深度调整为此返回值指定的新深度 + * -1 - 需要回退到非标记操作模式，并使用 + * host->cmd_per_lun作为非标记命令队列的 + * 深度限制 + * + * 是否阻塞：否 + * + * 注意事项：LLD可以在任意时刻调用该函数。系统将自动执行“正确 + * 的处理流程”；该函数支持在中断上下文中安全地调用 + * + * 函数定义：drivers/scsi/scsi.c + **/ + int scsi_track_queue_full(struct scsi_device *sdev, int depth) + + + /** + * scsi_unblock_requests - 恢复向指定主机适配器提交命令 + * + * @shost: 指向要解除阻塞的主机适配器的指针 + * + * 返回值：无 + * + * 是否阻塞：否 + * + * 函数定义：drivers/scsi/scsi_lib.c + **/ + void scsi_unblock_requests(struct Scsi_Host * shost) + + + +接口函数 +======== +接口函数由底层驱动（LLD）定义实现，其函数指针保存在 +struct scsi_host_template实例中，并将该实例传递给 +scsi_host_alloc()。 +部分接口函数为必选实现项。所有 +接口函数都应声明为static，约定俗成的命名规则如下， +驱动“xyz”应将其sdev_configure()函数声明为:: + + static int xyz_sdev_configure(struct scsi_device * sdev); + +其余接口函数的命名规范均依此类推。 + +需将该函数指针赋值给“struct scsi_host_template”实例 +的‘sdev_configure’成员变量中，并将该结构体实例指针传 +递到中间层的scsi_host_alloc()函数。 + +各个接口函数的详细说明可参考include/scsi/scsi_host.h +文件，具体描述位于“struct scsi_host_template”结构体 +各个成员的上方。在某些情况下，scsi_host.h头文件中的描 +述比本文提供的更为详尽。 + +以下按字母顺序列出所有接口函数及其说明。 + +摘要： + + - bios_param - 获取磁盘的磁头/扇区/柱面参数 + - eh_timed_out - SCSI命令超时回调 + - eh_abort_handler - 中止指定的SCSI命令 + - eh_bus_reset_handler - 触发SCSI总线复位 + - eh_device_reset_handler - 执行SCSI设备复位 + - eh_host_reset_handler - 复位主机（主机总线适配器） + - info - 提供指定主机适配器的相关信息 + - ioctl - 驱动可响应ioctl控制命令 + - proc_info - 支持/proc/scsi/{驱动名}/{主机号}文件节点的读写操作 + - queuecommand - 将SCSI命令提交到主机控制器，命令执行完成后调用‘done’回调 + - sdev_init - 在向新设备发送SCSI命令前的初始化 + - sdev_configure - 设备挂载后的精细化微调 + - sdev_destroy - 设备即将被移除前的清理 + + +详细信息:: + + /** + * bios_param - 获取磁盘的磁头/扇区/柱面参数 + * @sdev: 指向SCSI设备实例的指针（定义于 + * include/scsi/scsi_device.h中） + * @bdev: 指向块设备实例的指针（定义于fs.h中） + * @capacity: 设备容量（以512字节扇区为单位） + * @params: 三元数组用于保存输出结果： + * params[0]：磁头数量（最大255） + * params[1]：扇区数量（最大63） + * params[2]：柱面数量 + * + * 返回值：被忽略 + * + * 并发安全声明: 无锁 + * + * 调用上下文说明: 进程上下文（sd） + * + * 注意事项: 若未提供此函数，系统将基于READ CAPACITY + * 使用默认几何参数。params数组已预初始化伪值，防止函 + * 数无输出。 + * + * 可选实现说明：由LLD选择性定义 + **/ + int bios_param(struct scsi_device * sdev, struct block_device *bdev, + sector_t capacity, int params[3]) + + + /** + * eh_timed_out - SCSI命令超时回调 + * @scp: 标识超时的命令 + * + * 返回值: + * + * EH_HANDLED: 我已修复该错误，请继续完成该命令 + * EH_RESET_TIMER: 我需要更多时间，请重置定时器并重新开始计时 + * EH_NOT_HANDLED 开始正常的错误恢复流程 + * + * 并发安全声明: 无锁 + * + * 调用上下文说明: 中断上下文 + * + * 注意事项: 该回调函数为LLD提供一个机会进行本地 + * 错误恢复处理。此处的恢复仅限于判断该未完成的命 + * 令是否还有可能完成。此回调中不允许中止或重新启 + * 动该命令。 + * + * 可选实现说明：由LLD选择性定义 + **/ + int eh_timed_out(struct scsi_cmnd * scp) + + + /** + * eh_abort_handler - 中止指定的SCSI命令 + * @scp: 标识要中止的命令 + * + * 返回值：如果命令成功中止，则返回SUCCESS，否则返回FAILED + * + * 并发安全声明: 无锁 + * + * 调用上下文说明: 内核线程 + * + * 注意事项: 该函数仅在命令超时时才被调用。 + * + * 可选实现说明：由LLD选择性定义 + **/ + int eh_abort_handler(struct scsi_cmnd * scp) + + + /** + * eh_bus_reset_handler - 发起SCSI总线复位 + * @scp: 包含该设备的SCSI总线应进行重置 + * + * 返回值：重置成功返回SUCCESS；否则返回FAILED + * + * 并发安全声明: 无锁 + * + * 调用上下文说明: 内核线程 + * + * 注意事项: 由SCSI错误处理线程（scsi_eh）调用。 + * 在错误处理期间，当前主机适配器的所有IO请求均 + * 被阻塞。 + * + * 可选实现说明：由LLD选择性定义 + **/ + int eh_bus_reset_handler(struct scsi_cmnd * scp) + + + /** + * eh_device_reset_handler - 发起SCSI设备复位 + * @scp: 指定将被重置的SCSI设备 + * + * 返回值：如果命令成功中止返回SUCCESS，否则返回FAILED + * + * 并发安全声明: 无锁 + * + * 调用上下文说明: 内核线程 + * + * 注意事项: 由SCSI错误处理线程（scsi_eh）调用。 + * 在错误处理期间，当前主机适配器的所有IO请求均 + * 被阻塞。 + * + * 可选实现说明：由LLD选择性定义 + **/ + int eh_device_reset_handler(struct scsi_cmnd * scp) + + + /** + * eh_host_reset_handler - 复位主机（主机总线适配器） + * @scp: 管理该设备的SCSI主机适配器应该被重置 + * + * 返回值：如果命令成功中止返回SUCCESS，否则返回FAILED + * + * 并发安全声明: 无锁 + * + * 调用上下文说明: 内核线程 + * + * 注意事项: 由SCSI错误处理线程（scsi_eh）调用。 + * 在错误处理期间，当前主机适配器的所有IO请求均 + * 被阻塞。当使用默认的eh_strategy策略时，如果 + * _abort_、_device_reset_、_bus_reset_和该处 + * 理函数均未定义（或全部返回FAILED），系统强制 + * 该故障设备处于离线状态 + * + * 可选实现说明：由LLD选择性定义 + **/ + int eh_host_reset_handler(struct scsi_cmnd * scp) + + + /** + * info - 提供给定主机适配器的详细信息：驱动程序名称 + * 以及用于区分不同主机适配器的数据结构 + * @shp: 指向目标主机的struct Scsi_Host实例 + * + * 返回值：返回以NULL结尾的ASCII字符串。[驱动 + * 负责管理返回的字符串所在内存并确保其在整个 + * 主机适配器生命周期内有效。] + * + * 并发安全声明: 无锁 + * + * 调用上下文说明: 进程上下文 + * + * 注意事项: 通常提供诸如I/O地址或中断号 + * 等PCI或ISA信息。如果未实现该函数，则 + * 默认使用struct Scsi_Host::name 字段。 + * 返回的字符串应为单行（即不包含换行符）。 + * 通过SCSI_IOCTL_PROBE_HOST ioctl可获 + * 取该函数返回的字符串，如果该函数不可用， + * 则ioctl返回struct Scsi_Host::name中 + * 的字符串。 + + * + * 可选实现说明：由LLD选择性定义 + **/ + const char * info(struct Scsi_Host * shp) + + + /** + * ioctl - 驱动可响应ioctl控制命令 + * @sdp: ioctl操作针对的SCSI设备 + * @cmd: ioctl命令号 + * @arg: 指向用户空间读写数据的指针。由于他指向用 + * 户空间，必须使用适当的内核函数 + * （如 copy_from_user()）。按照Unix的风 + * 格，该参数也可以视为unsigned long 类型。 + * + * 返回值：如果出错则返回负的“errno”值。返回0或正值表 + * 示成功，并将返回值传递给用户空间。 + * + * 并发安全声明：无锁 + * + * 调用上下文说明：进程上下文 + * + * 注意事项：SCSI子系统使用“逐层下传 + * （trickle down）”的ioctl模型。 + * 用户层会对上层驱动设备节点 + * （例如/dev/sdc）发起ioctl()调用， + * 如果上层驱动无法识别该命令，则将其 + * 传递给SCSI中间层，若中间层也无法识 + * 别，则再传递给控制该设备的LLD。 + * 根据最新的Unix标准，对于不支持的 + * ioctl()命令，应返回-ENOTTY。 + * + * 可选实现说明：由LLD选择性定义 + **/ + int ioctl(struct scsi_device *sdp, int cmd, void *arg) + + + /** + * proc_info - 支持/proc/scsi/{驱动名}/{主机号}文件节点的读写操作 + * @buffer: 输入或出的缓冲区锚点（writeto1_read0==0表示向buffer写 + * 入，writeto1_read0==1表示由buffer读取） + * @start: 当writeto1_read0==0时，用于指定驱动实际填充的起始位置； + * 当writeto1_read0==1时被忽略。 + * @offset: 当writeto1_read0==0时，表示用户关注的数据在缓冲区中的 + * 偏移。当writeto1_read0==1时忽略。 + * @length: 缓冲区的最大（或实际使用）长度 + * @host_no: 目标SCSI Host的编号（struct Scsi_Host::host_no） + * @writeto1_read0: 1 -> 表示数据从用户空间写入驱动 + * （例如，“echo some_string > /proc/scsi/xyz/2”） + * 0 -> 表示用户从驱动读取数据 + * （例如，“cat /proc/scsi/xyz/2”） + * + * 返回值：当writeto1_read0==1时返回写入长度。否则， + * 返回从offset偏移开始输出到buffer的字符数。 + * + * 并发安全声明：无锁 + * + * 调用上下文说明：进程上下文 + * + * 注意事项：该函数由scsi_proc.c驱动，与proc_fs交互。 + * 当前SCSI子系统可移除对proc_fs的支持，相关配置选。 + * + * 可选实现说明：由LLD选择性定义 + **/ + int proc_info(char * buffer, char ** start, off_t offset, + int length, int host_no, int writeto1_read0) + + + /** + * queuecommand - 将SCSI命令提交到主机控制器，命令执行完成后调用scp->scsi_done回调函数 + * @shost: 指向目标SCSI主机控制器 + * @scp: 指向待处理的SCSI命令 + * + * 返回值：成功返回0。 + * + * 如果发生错误，则返回： + * + * SCSI_MLQUEUE_DEVICE_BUSY表示设备队列满， + * SCSI_MLQUEUE_HOST_BUSY表示整个主机队列满 + * + * 在这两种情况下，中间层将自动重新提交该I/O请求 + * + * - 若返回SCSI_MLQUEUE_DEVICE_BUSY，则仅暂停该 + * 特定设备的命令处理，当该设备的某个命令完成返回 + * 时（或在短暂延迟后如果没有其他未完成命令）将恢 + * 复其处理。其他设备的命令仍正常继续处理。 + * + * - 若返回SCSI_MLQUEUE_HOST_BUSY，将暂停该主机 + * 的所有I/O操作，当任意命令从该主机返回时（或在 + * 短暂延迟后如果没有其他未完成命令）将恢复处理。 + * + * 为了与早期的queuecommand兼容，任何其他返回值 + * 都被视作SCSI_MLQUEUE_HOST_BUSY。 + * + * 对于其他可立即检测到的错误，可通过以下流程处 + * 理：设置scp->result为适当错误值，调用scp->scsi_done + * 回调函数，然后该函数返回0。若该命令未立即执行（LLD + * 正在启动或将要启动该命令），则应将scp->result置0并 + * 返回0。 + * + * 命令所有权说明：若驱动返回0，则表示驱动获得该命令的 + * 所有权， + * 并必须确保最终执行scp->scsi_done回调函数。注意：驱动 + * 可以在返回0之前调用scp->scsi_done，但一旦调用该回 + * 调函数后，就只能返回0。若驱动返回非零值，则禁止在任何时 + * 刻执行该命令的scsi_done回调函数。 + * + * 并发安全声明：在2.6.36及更早的内核版本中，调用该函数时持有 + * struct Scsi_Host::host_lock锁（通过“irqsave”获取中断安全的自旋锁）， + * 并且返回时仍需保持该锁；从Linux 2.6.37开始，queuecommand + * 将在无锁状态下被调用。 + * + * 调用上下文说明：在中断（软中断）或进程上下文中 + * + * 注意事项：该函数执行应当非常快速，通常不会等待I/O + * 完成。因此scp->scsi_done回调函数通常会在该函数返 + * 回后的某个时刻被调用（经常直接从中断服务例程中调用）。 + * 某些情况下（如模拟SCSI INQUIRY响应的伪适配器驱动）， + * scp->scsi_done回调可能在该函数返回前就被调用。 + * 若scp->scsi_done回调函数未在指定时限内被调用，SCSI中 + * 间层将启动错误处理流程。当调用scp->scsi_done回调函数 + * 时，若“result”字段被设置为CHECK CONDITION， + * 则LLD应执行自动感知并填充 + * struct scsi_cmnd::sense_buffer数组。在中间层将 + * 命令加入LLD队列之前前，scsi_cmnd::sense_buffer数组 + * 会被清零。 + * + * 可选实现说明：LLD必须实现 + **/ + int queuecommand(struct Scsi_Host *shost, struct scsi_cmnd * scp) + + + /** + * sdev_init - 在向新设备发送任何SCSI命令前（即开始扫描 + * 之前）调用该函数 + * @sdp: 指向即将被扫描的新设备的指针 + * + * 返回值：返回0表示正常。返回其他值表示出错， + * 该设备将被忽略。 + * + * 并发安全声明：无锁 + * + * 调用上下文说明：进程上下文 + * + * 注意事项：该函数允许LLD在设备首次扫描前分配所需的资源。 + * 对应的SCSI设备可能尚未真正存在，但SCSI中间层即将对其进 + * 行扫描（例如发送INQUIRY命令等）。如果设备存在，将调用 + * sdev_configure()进行配置；如果设备不存在，则调用 + * sdev_destroy()销毁。更多细节请参考 + * include/scsi/scsi_host.h文件。 + * + * 可选实现说明：由LLD选择性定义 + **/ + int sdev_init(struct scsi_device *sdp) + + + /** + * sdev_configure - 在设备首次完成扫描（即已成功响应INQUIRY + * 命令）之后，LDD可调用该函数对设备进行进一步配置 + * @sdp: 已连接的设备 + * + * 返回值：返回0表示成功。任何其他返回值都被视为错误，此时 + * 设备将被标记为离线。[被标记离线的设备不会调用sdev_destroy()， + * 因此需要LLD主动清理资源。] + * + * 并发安全声明：无锁 + * + * 调用上下文说明：进程上下文 + * + * 注意事项：该接口允许LLD查看设备扫描代码所发出的初始INQUIRY + * 命令的响应，并采取对应操作。具体实现细节请参阅 + * include/scsi/scsi_host.h文件。 + * + * 可选实现说明：由LLD选择性定义 + **/ + int sdev_configure(struct scsi_device *sdp) + + + /** + * sdev_destroy - 当指定设备即将被关闭时调用。此时该设备 + * 上的所有I/O活动均已停止。 + * @sdp: 即将关闭的设备 + * + * 返回值：无 + * + * 并发安全声明：无锁 + * + * 调用上下文说明：进程上下文 + * + * 注意事项：该设备的中间层数据结构仍然存在 + * 但即将被销毁。驱动程序此时应当释放为该设 + * 备分配的所有专属资源。系统将不再向此sdp + * 实例发送任何命令。[但该设备可能在未来被 + * 重新连接，届时将通过新的struct scsi_device + * 实例，并触发后续的sdev_init()和 + * sdev_configure()调用过程。] + * + * 可选实现说明：由LLD选择性定义 + **/ + void sdev_destroy(struct scsi_device *sdp) + + + +数据结构 +======== +struct scsi_host_template +------------------------- +每个LLD对应一个“struct scsi_host_template” +实例 [#]_。该结构体通常被初始化为驱动头文件中的静 +态全局变量，此方式可确保未显式初始化的成员自动置零 +（0或NULL）。关键成员变量说明如下： + + name + - 驱动程序的名称（可以包含空格，请限制在80个字符以内） + + proc_name + - 在“/proc/scsi//” + 和sysfs的“drivers”目录中使用的名称。因此 + “proc_name”应仅包含Unix文件名中可接受 + 的字符。 + + ``(*queuecommand)()`` + - 中间层使用的主要回调函数，用于将SCSI命令 + 提交到LLD。 + + vendor_id + - 该字段是一个唯一标识值，用于确认提供 + Scsi_Host LLD的供应商，最常用于 + 验证供应商特定的消息请求。该值由标识符类型 + 和供应商特定值组成，有效格式描述请参阅 + scsi_netlink.h头文件。 + +该结构体的完整定义及详细注释请参阅 ``include/scsi/scsi_host.h``。 + +.. [#] 在极端情况下，单个驱动需要控制多种不同类型的硬件时，驱动可 + 能包含多个实例，（例如某个LLD驱动同时处理ISA和PCI两种类型 + 的适配卡，并为每种硬件类型维护独立的 + struct scsi_host_template实例）。 + +struct Scsi_Host +---------------- +每个由LLD控制的主机适配器对应一个struct Scsi_Host实例。 +该结构体与struct scsi_host_template具有多个相同成员。 +当创建struct Scsi_Host实例时（通过hosts.c中的 +scsi_host_alloc()函数），这些通用成员会从LLD的 +struct scsi_host_template实例初始化而来。关键成员说明 +如下： + + host_no + - 系统范围内唯一的主机标识号，按升序从0开始分配 + can_queue + - 必须大于0，表示适配器可处理的最大并发命令数，禁 + 止向适配器发送超过此数值的命令数 + this_id + - 主机适配器的SCSI ID（SCSI启动器标识），若未知则 + 设置为-1 + sg_tablesize + - 主机适配器支持的最大散列表（scatter-gather）元素 + 数。设置为SG_ALL或更小的值可避免使用链式SG列表， + 且最小值必须为1 + max_sectors + - 单个SCSI命令中允许的最大扇区数（通常为512字节/ + 扇区）。默认值为0，此时会使用 + SCSI_DEFAULT_MAX_SECTORS（在scsi_host.h中定义）， + 当前该值为1024。因此，如果未定义max_sectors，则磁盘的 + 最大传输大小为512KB。注意：这个大小可能不足以支持 + 磁盘固件上传。 + cmd_per_lun + - 主机适配器的设备上，每个LUN可排队的最大命令数。 + 此值可通过LLD调用scsi_change_queue_depth()进行 + 调整。 + hostt + - 指向LLD struct scsi_host_template实例的指针， + 当前struct Scsi_Host实例正是由此模板生成。 + hostt->proc_name + - LLD的名称，sysfs使用的驱动名。 + transportt + - 指向LLD struct scsi_transport_template实例的指 + 针（如果存在）。当前支持FC与SPI传输协议。 + hostdata[0] + - 为LLD在struct Scsi_Host结构体末尾预留的区域，大小由 + scsi_host_alloc()的第二个参数(privsize)决定。 + +scsi_host结构体的完整定义详见include/scsi/scsi_host.h。 + +struct scsi_device +------------------ +通常而言，每个SCSI逻辑单元（Logical Unit）对应一个该结构 +的实例。连接到主机适配器的SCSI设备通过三个要素唯一标识：通 +道号（Channel Number）、目标ID（Target ID）和逻辑单元号 +（LUN）。 +该结构体完整定义于include/scsi/scsi_device.h。 + +struct scsi_cmnd +---------------- +该结构体实例用于在LLD与SCSI中间层之间传递SCSI命令 +及其响应。SCSI中间层会确保：提交到LLD的命令数不超过 +scsi_change_queue_depth()（或struct Scsi_Host::cmd_per_lun） +设定的上限，且每个SCSI设备至少分配一个struct scsi_cmnd实例。 +关键成员说明如下： + + cmnd + - 包含SCSI命令的数组 + cmd_len + - SCSI命令的长度（字节为单位） + sc_data_direction + - 数据的传输方向。请参考 + include/linux/dma-mapping.h中的 + “enum dma_data_direction”。 + result + - LLD在调用“done”之前设置该值。值为0表示命令成功 + 完成（并且所有数据（如果有）已成功在主机与SCSI + 目标设备之间完成传输）。“result”是一个32位无符 + 号整数，可以视为2个相关字节。SCSI状态值位于最 + 低有效位。请参考include/scsi/scsi.h中的 + status_byte()与host_byte()宏以及其相关常量。 + sense_buffer + - 这是一个数组（最大长度为SCSI_SENSE_BUFFERSIZE + 字节），当SCSI状态（“result”的最低有效位）设为 + CHECK_CONDITION（2）时，该数组由LLD填写。若 + CHECK_CONDITION被置位，且sense_buffer[0]的高 + 半字节值为7，则中间层会认为sense_buffer数组 + 包含有效的SCSI感知数据；否则，中间层会发送 + REQUEST_SENSE SCSI命令来获取感知数据。由于命令 + 排队的存在，后一种方式容易出错，因此建议LLD始终 + 支持“自动感知”。 + device + - 指向与该命令关联的scsi_device对象的指针。 + resid_len (通过调用scsi_set_resid() / scsi_get_resid()访问) + - LLD应将此无符号整数设置为请求的传输长度（即 + “request_bufflen”）减去实际传输的字节数。“resid_len” + 默认设置为0，因此如果LLD无法检测到数据欠载（不能报告溢出）， + 则可以忽略它。LLD应在调用“done”之前设置 + “resid_len”。 + underflow + - 如果实际传输的字节数小于该字段值，LLD应将 + DID_ERROR << 16赋值给“result”。并非所有 + LLD都实现此项检查，部分LLD仅将错误信息输出 + 到日志，而未真正报告DID_ERROR。更推荐 + 的做法是由LLD实现“resid_len”的支持。 + +建议LLD在从SCSI目标设备进行数据传输时设置“resid_len”字段 +（例如READ操作）。当这些数据传输的感知码是MEDIUM ERROR或 +HARDWARE ERROR（有时也包括RECOVERED ERROR）时设置 +resid_len尤为重要。在这种情况下，如果LLD无法确定接收了多 +少数据，那么最安全的做法是表示没有接收到任何数据。例如： +为了表明没有接收到任何有效数据，LLD可以使用如下辅助函数:: + + scsi_set_resid(SCpnt, scsi_bufflen(SCpnt)); + +其中SCpnt是一个指向scsi_cmnd对象的指针。如果表示仅接收到 +三个512字节的数据块，可以这样设置resid_len:: + + scsi_set_resid(SCpnt, scsi_bufflen(SCpnt) - (3 * 512)); + +scsi_cmnd结构体定义在 include/scsi/scsi_cmnd.h文件中。 + + +锁 +=== +每个struct Scsi_Host实例都有一个名为default_lock +的自旋锁（spin_lock），它在scsi_host_alloc()函数 +中初始化（该函数定义在hosts.c文件中）。在同一个函数 +中，struct Scsi_Host::host_lock指针会被初始化为指 +向default_lock。此后，SCSI中间层执行的加 +锁和解锁操作都会使用host_lock指针。过去，驱动程序可 +以重写host_lock指针，但现在不再允许这样做。 + + +自动感知 +======== +自动感知（Autosense或auto-sense）在SAM-2规范中被定 +义为：当SCSI命令完成状态为CHECK CONDITION时，“自动 +将感知数据（sense data）返回给应用程序客户端”。底层 +驱动（LLD）应当执行自动感知。当LLD检测到 +CHECK CONDITION状态时，可通过以下任一方式完成： + + a) 要求SCSI协议（例如SCSI并行接口（SPI））在此 + 类响应中执行一次额外的数据传输 + + b) 或由LLD主动发起REQUEST SENSE命令获取感知数据 + +无论采用哪种方式，当检测到CHECK CONDITION状态时，中 +间层通过检查结构体scsi_cmnd::sense_buffer[0]的值来 +判断LLD是否已执行自动感知。若该字节的高半字节为7 +（或 0xf），则认为已执行自动感知；若该字节为其他值 +（且此字节在每条命令执行前会被初始化为0），则中间层将 +主动发起REQUEST SENSE命令。 + +在存在命令队列的场景下，保存失败命令感知数据的“nexus” +可能会在等待REQUEST SENSE命令期间变得不同步。因此， +最佳实践是由LLD执行自动感知。 + + +自Linux内核2.4以来的变更 +======================== +io_request_lock已被多个细粒度锁替代。与底层驱动 +（LLD）相关的锁是struct Scsi_Host::host_lock，且每 +个SCSI主机都独立拥有一个该锁。 + +旧的错误处理机制已经被移除。这意味着LLD的接口函数 +abort()与reset()已经被删除。 +struct scsi_host_template::use_new_eh_code标志 +也已经被移除。 + +在Linux内核2.4中，SCSI子系统的配置描述与其他Linux子系 +统的配置描述集中存放在Documentation/Configure.help +文件中。在Linux内核2.6中，SCSI子系统拥有独立的配置文 +件drivers/scsi/Kconfig（体积更小），同时包含配置信息 +与帮助信息。 + +struct SHT已重命名为struct scsi_host_template。 + +新增“热插拔初始化模型”以及许多用于支持该功能的额外函数。 + + +致谢 +==== +以下人员对本文档做出了贡献： + + - Mike Anderson + - James Bottomley + - Patrick Mansfield + - Christoph Hellwig + - Doug Ledford + - Andries Brouwer + - Randy Dunlap + - Alan Stern + + +Douglas Gilbert +dgilbert at interlog dot com + +2004年9月21日 diff --git a/Documentation/translations/zh_CN/scsi/sd-parameters.rst b/Documentation/translations/zh_CN/scsi/sd-parameters.rst new file mode 100644 index 00000000000000..b3d0445dc9f3a4 --- /dev/null +++ b/Documentation/translations/zh_CN/scsi/sd-parameters.rst @@ -0,0 +1,38 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/scsi/sd-parameters.rst + +:翻译: + + 郝栋栋 doubled + +:校译: + + + +============================ +Linux SCSI磁盘驱动（sd）参数 +============================ + +缓存类型（读/写） +------------------ +启用/禁用驱动器读写缓存。 + +=========================== ===== ===== ======= ======= + 缓存类型字符串 WCE RCD 写缓存 读缓存 +=========================== ===== ===== ======= ======= + write through 0 0 关闭 开启 + none 0 1 关闭 关闭 + write back 1 0 开启 开启 + write back, no read (daft) 1 1 开启 关闭 +=========================== ===== ===== ======= ======= + +将缓存类型设置为“write back”并将该设置保存到驱动器:: + + # echo "write back" > cache_type + +如果要修改缓存模式但不使更改持久化，可在缓存类型字符串前 +添加“temporary ”。例如:: + + # echo "temporary write back" > cache_type diff --git a/Documentation/translations/zh_CN/scsi/wd719x.rst b/Documentation/translations/zh_CN/scsi/wd719x.rst new file mode 100644 index 00000000000000..79757c42032ba5 --- /dev/null +++ b/Documentation/translations/zh_CN/scsi/wd719x.rst @@ -0,0 +1,35 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/scsi/libsas.rst + +:翻译: + + 张钰杰 Yujie Zhang + +:校译: + +==================================================== +Western Digital WD7193, WD7197 和 WD7296 SCSI 卡驱动 +==================================================== + +这些卡需要加载固件。固件可从 WD 提供下载的 Windows NT 驱动程 +序中提取。地址如下： + +http://support.wdc.com/product/download.asp?groupid=801&sid=27&lang=en + +该文件或网页上都未包含任何许可声明，因此该固件可能无法被收录到 +linux-firmware 项目中。 + +提供的脚本可用于下载并提取固件，生成 wd719x-risc.bin 和 +wd719x-wcs.bin 文件。请将它们放置在 /lib/firmware/ 目录下。 +脚本内容如下： + + #!/bin/sh + wget http://support.wdc.com/download/archive/pciscsi.exe + lha xi pciscsi.exe pci-scsi.exe + lha xi pci-scsi.exe nt/wd7296a.sys + rm pci-scsi.exe + dd if=wd7296a.sys of=wd719x-risc.bin bs=1 skip=5760 count=14336 + dd if=wd7296a.sys of=wd719x-wcs.bin bs=1 skip=20096 count=514 + rm wd7296a.sys diff --git a/Documentation/translations/zh_CN/security/SCTP.rst b/Documentation/translations/zh_CN/security/SCTP.rst new file mode 100644 index 00000000000000..f2774b0d66b500 --- /dev/null +++ b/Documentation/translations/zh_CN/security/SCTP.rst @@ -0,0 +1,317 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/security/SCTP.rst + +:翻译: + 赵硕 Shuo Zhao + +==== +SCTP +==== + +SCTP的LSM支持 +============= + +安全钩子 +-------- + +对于安全模块支持，已经实现了三个特定于SCTP的钩子:: + + security_sctp_assoc_request() + security_sctp_bind_connect() + security_sctp_sk_clone() + security_sctp_assoc_established() + +这些钩子的用法在下面的 `SCTP的SELinux支持`_ 一章中描述SELinux的实现。 + + +security_sctp_assoc_request() +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +将关联INIT数据包的 ``@asoc`` 和 ``@chunk->skb`` 传递给安全模块。 +成功时返回 0，失败时返回错误。 +:: + + @asoc - 指向sctp关联结构的指针。 + @skb - 指向包含关联数据包skbuff的指针。 + + +security_sctp_bind_connect() +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +将一个或多个IPv4/IPv6地址传递给安全模块进行基于 ``@optname`` 的验证， +这将导致是绑定还是连接服务，如下面的权限检查表所示。成功时返回 0，失败 +时返回错误。 +:: + + @sk - 指向sock结构的指针。 + @optname - 需要验证的选项名称。 + @address - 一个或多个IPv4 / IPv6地址。 + @addrlen - 地址的总长度。使用sizeof(struct sockaddr_in)或 + sizeof(struct sockaddr_in6)来计算每个ipv4或ipv6地址。 + + ------------------------------------------------------------------ + | BIND 类型检查 | + | @optname | @address contains | + |----------------------------|-----------------------------------| + | SCTP_SOCKOPT_BINDX_ADD | 一个或多个 ipv4 / ipv6 地址 | + | SCTP_PRIMARY_ADDR | 单个 ipv4 or ipv6 地址 | + | SCTP_SET_PEER_PRIMARY_ADDR | 单个 ipv4 or ipv6 地址 | + ------------------------------------------------------------------ + + ------------------------------------------------------------------ + | CONNECT 类型检查 | + | @optname | @address contains | + |----------------------------|-----------------------------------| + | SCTP_SOCKOPT_CONNECTX | 一个或多个 ipv4 / ipv6 地址 | + | SCTP_PARAM_ADD_IP | 一个或多个 ipv4 / ipv6 地址 | + | SCTP_SENDMSG_CONNECT | 单个 ipv4 or ipv6 地址 | + | SCTP_PARAM_SET_PRIMARY | 单个 ipv4 or ipv6 地址 | + ------------------------------------------------------------------ + +条目 ``@optname`` 的摘要如下:: + + SCTP_SOCKOPT_BINDX_ADD - 允许在（可选地）调用 bind(3) 后，关联额外 + 的绑定地址。 + sctp_bindx(3) 用于在套接字上添加一组绑定地址。 + + SCTP_SOCKOPT_CONNECTX - 允许分配多个地址以连接到对端（多宿主）。 + sctp_connectx(3) 使用多个目标地址在SCTP + 套接字上发起连接。 + + SCTP_SENDMSG_CONNECT - 通过sendmsg(2)或sctp_sendmsg(3)在新关联上 + 发起连接。 + + SCTP_PRIMARY_ADDR - 设置本地主地址。 + + SCTP_SET_PEER_PRIMARY_ADDR - 请求远程对端将某个地址设置为其主地址。 + + SCTP_PARAM_ADD_IP - 在启用动态地址重配置时使用。 + SCTP_PARAM_SET_PRIMARY - 如下所述，启用重新配置功能。 + + +为了支持动态地址重新配置，必须在两个端点上启用以下 +参数（或使用适当的 **setsockopt**\(2)）:: + + /proc/sys/net/sctp/addip_enable + /proc/sys/net/sctp/addip_noauth_enable + +当相应的 ``@optname`` 存在时，以下的 *_PARAM_* 参数会 +通过ASCONF块发送到对端:: + + @optname ASCONF Parameter + ---------- ------------------ + SCTP_SOCKOPT_BINDX_ADD -> SCTP_PARAM_ADD_IP + SCTP_SET_PEER_PRIMARY_ADDR -> SCTP_PARAM_SET_PRIMARY + + +security_sctp_sk_clone() +~~~~~~~~~~~~~~~~~~~~~~~~ +每当通过 **accept**\(2)创建一个新的套接字（即TCP类型的套接字），或者当 +一个套接字被‘剥离’时如用户空间调用 **sctp_peeloff**\(3)，会调用此函数。 +:: + + @asoc - 指向当前sctp关联结构的指针。 + @sk - 指向当前套接字结构的指针。 + @newsk - 指向新的套接字结构的指针。 + + +security_sctp_assoc_established() +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +当收到COOKIE ACK时调用，对于客户端，对端的secid将被保存 +到 ``@asoc->peer_secid`` 中:: + + @asoc - 指向sctp关联结构的指针。 + @skb - 指向COOKIE ACK数据包的skbuff指针。 + + +用于关联建立的安全钩子 +---------------------- + +下图展示了在建立关联时 ``security_sctp_bind_connect()``、 ``security_sctp_assoc_request()`` +和 ``security_sctp_assoc_established()`` 的使用。 +:: + + SCTP 端点 "A" SCTP 端点 "Z" + ============= ============= + sctp_sf_do_prm_asoc() + 关联的设置可以通过connect(2), + sctp_connectx(3),sendmsg(2) + or sctp_sendmsg(3)来发起。 + 这将导致调用security_sctp_bind_connect() + 发起与SCTP对端端点"Z"的关联。 + INIT ---------------------------------------------> + sctp_sf_do_5_1B_init() + 响应一个INIT数据块。 + SCTP对端端点"A"正在请求一个临时关联。 + 如果是首次关联，调用security_sctp_assoc_request() + 来设置对等方标签。 + 如果不是首次关联，检查是否被允许。 + 如果允许，则发送: + <----------------------------------------------- INIT ACK + | + | 否则，生成审计事件并默默丢弃该数据包。 + | + COOKIE ECHO ------------------------------------------> + sctp_sf_do_5_1D_ce() + 响应一个COOKIE ECHO数据块。 + 确认该cookie并创建一个永久关联。 + 调用security_sctp_assoc_request() + 执行与INIT数据块响应相同的操作。 + <------------------------------------------- COOKIE ACK + | | + sctp_sf_do_5_1E_ca | + 调用security_sctp_assoc_established() | + 来设置对方标签 | + | | + | 如果是SCTP_SOCKET_TCP或是剥离的套接 + | 字，会调用 security_sctp_sk_clone() + | 来克隆新的套接字。 + | | + 建立 建立 + | | + ------------------------------------------------------------------ + | 关联建立 | + ------------------------------------------------------------------ + + +SCTP的SELinux支持 +================= + +安全钩子 +-------- + +上面的 `SCTP的LSM支持`_ 章节描述了以下SCTP安全钩子，SELinux的细节 +说明如下:: + + security_sctp_assoc_request() + security_sctp_bind_connect() + security_sctp_sk_clone() + security_sctp_assoc_established() + + +security_sctp_assoc_request() +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +将关联INIT数据包的 ``@asoc`` 和 ``@chunk->skb`` 传递给安全模块。 +成功时返回 0，失败时返回错误。 +:: + + @asoc - 指向sctp关联结构的指针。 + @skb - 指向关联数据包skbuff的指针。 + +安全模块执行以下操作: + 如果这是 ``@asoc->base.sk`` 上的首次关联，则将对端的sid设置 + 为 ``@skb`` 中的值。这将确保只有一个对端sid分配给可能支持多个 + 关联的 ``@asoc->base.sk``。 + + 否则验证 ``@asoc->base.sk peer sid`` 是否与 ``@skb peer sid`` + 匹配，以确定该关联是否应被允许或拒绝。 + + 将sctp的 ``@asoc sid`` 设置为套接字的sid（来自 ``asoc->base.sk``） + 并从 ``@skb peer sid`` 中提取MLS部分。这将在SCTP的TCP类型套接字及 + 剥离连接中使用，因为它们会导致生成一个新的套接字。 + + 如果配置了IP安全选项（CIPSO/CALIPSO），则会在套接字上设置IP选项。 + + +security_sctp_bind_connect() +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +根据 ``@optname`` 检查ipv4/ipv6地址所需的权限，具体如下:: + + ------------------------------------------------------------------ + | BIND 权限检查 | + | @optname | @address contains | + |----------------------------|-----------------------------------| + | SCTP_SOCKOPT_BINDX_ADD | 一个或多个 ipv4 / ipv6 地址 | + | SCTP_PRIMARY_ADDR | 单个 ipv4 or ipv6 地址 | + | SCTP_SET_PEER_PRIMARY_ADDR | 单个 ipv4 or ipv6 地址 | + ------------------------------------------------------------------ + + ------------------------------------------------------------------ + | CONNECT 权限检查 | + | @optname | @address contains | + |----------------------------|-----------------------------------| + | SCTP_SOCKOPT_CONNECTX | 一个或多个 ipv4 / ipv6 地址 | + | SCTP_PARAM_ADD_IP | 一个或多个 ipv4 / ipv6 地址 | + | SCTP_SENDMSG_CONNECT | 单个 ipv4 or ipv6 地址 | + | SCTP_PARAM_SET_PRIMARY | 单个 ipv4 or ipv6 地址 | + ------------------------------------------------------------------ + + +`SCTP的LSM支持`_ 提供了 ``@optname`` 摘要，并且还描述了当启用动态地址重新 +配置时，ASCONF块的处理过程。 + + +security_sctp_sk_clone() +~~~~~~~~~~~~~~~~~~~~~~~~ +每当通过 **accept**\(2)（即TCP类型的套接字）创建一个新的套接字，或者 +当一个套接字被“剥离”如用户空间调用 **sctp_peeloff**\(3)时， +``security_sctp_sk_clone()`` 将会分别将新套接字的sid和对端sid设置为 +``@asoc sid`` 和 ``@asoc peer sid`` 中包含的值。 +:: + + @asoc - 指向当前sctp关联结构的指针。 + @sk - 指向当前sock结构的指针。 + @newsk - 指向新sock结构的指针。 + + +security_sctp_assoc_established() +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +当接收到COOKIE ACK时调用，它将连接的对端sid设置为 ``@skb`` 中的值:: + + @asoc - 指向sctp关联结构的指针。 + @skb - 指向COOKIE ACK包skbuff的指针。 + + +策略声明 +-------- +以下支持SCTP的类和权限在内核中是可用的:: + + class sctp_socket inherits socket { node_bind } + +当启用以下策略功能时:: + + policycap extended_socket_class; + +SELinux对SCTP的支持添加了用于连接特定端口类型 ``name_connect`` 权限 +以及在下面的章节中进行解释的 ``association`` 权限。 + +如果用户空间工具已更新，SCTP将支持如下所示的 ``portcon`` 声明:: + + portcon sctp 1024-1036 system_u:object_r:sctp_ports_t:s0 + + +SCTP对端标签 +------------ +每个SCTP套接字仅分配一个对端标签。这个标签将在建立第一个关联时分配。 +任何后续在该套接字上的关联都会将它们的数据包对端标签与套接字的对端标 +签进行比较，只有在它们不同的情况下 ``association`` 权限才会被验证。 +这是通过检查套接字的对端sid与接收到的数据包中的对端sid来验证的，以决 +定是否允许或拒绝该关联。 + +注: + 1) 如果对端标签未启用，则对端上下文将始终是 ``SECINITSID_UNLABELED`` + （在策略声明中为 ``unlabeled_t`` ）。 + + 2) 由于SCTP可以在单个套接字上支持每个端点（多宿主）的多个传输地址，因此 + 可以配置策略和NetLabel为每个端点提供不同的对端标签。由于套接字的对端 + 标签是由第一个关联的传输地址决定的，因此建议所有的对端标签保持一致。 + + 3) 用户空间可以使用 **getpeercon**\(3) 来检索套接字的对端上下文。 + + 4) 虽然这不是SCTP特有的，但在使用NetLabel时要注意，如果标签分配给特定的接 + 口，而该接口‘goes down’，则NetLabel服务会移除该条目。因此，请确保网络启 + 动脚本调用 **netlabelctl**\(8) 来设置所需的标签（详细信息， + 请参阅 **netlabel-config**\(8) 辅助脚本）。 + + 5) NetLabel SCTP对端标签规则应用如下所述标签为“netlabel”的一组帖子： + https://www.paul-moore.com/blog/t. + + 6) CIPSO仅支持IPv4地址： ``socket(AF_INET, ...)`` + CALIPSO仅支持IPv6地址： ``socket(AF_INET6, ...)`` + + 测试CIPSO/CALIPSO时请注意以下事项： + a) 如果SCTP数据包由于无效标签无法送达，CIPSO会发送一个ICMP包。 + b) CALIPSO不会发送ICMP包，只会默默丢弃数据包。 + + 7) RFC 3554不支持IPSEC —— SCTP/IPSEC支持尚未在用户空间实现(**racoon**\(8) + 或 **ipsec_pluto**\(8))，尽管内核支持 SCTP/IPSEC。 diff --git a/Documentation/translations/zh_CN/security/index.rst b/Documentation/translations/zh_CN/security/index.rst index 78d9d4b36dca06..d33b107405c7d3 100644 --- a/Documentation/translations/zh_CN/security/index.rst +++ b/Documentation/translations/zh_CN/security/index.rst @@ -18,7 +18,9 @@ credentials snp-tdx-threat-model lsm + lsm-development sak + SCTP self-protection siphash tpm/index @@ -28,7 +30,5 @@ TODOLIST: * IMA-templates * keys/index -* lsm-development -* SCTP * secrets/index * ipe diff --git a/Documentation/translations/zh_CN/security/ipe.rst b/Documentation/translations/zh_CN/security/ipe.rst new file mode 100644 index 00000000000000..55968f0c7ae3f5 --- /dev/null +++ b/Documentation/translations/zh_CN/security/ipe.rst @@ -0,0 +1,398 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/security/sak.rst + +:翻译: + 赵硕 Shuo Zhao + +完整性策略执行（IPE）-内核文档 +============================== + +.. NOTE:: + + 这是针对开发人员而不是管理员的文档。如果您正在 + 寻找有关IPE使用的文档，请参阅 :doc:`IPE admin + guide `。 + +历史背景 +-------- + +最初促使IPE实施的原因，是需要创建一个锁定式系统。该系统将 +从一开始就具备安全性，并且在可执行代码和系统功能关键的特定 +数据文件上，提供强有力的完整性保障。只有当这些特定数据文件 +符合完整性策略时，它们才可以被读取。系统中还将存在强制访问 +控制机制，因此扩展属性（xattrs）也必须受到保护。这就引出了 +需要选择能够提供完整性保证的机制。当时，有两种主要机制被考 +虑，用以在满足这些要求的前提下保证系统完整性： + + 1. IMA + EVM Signatures + 2. DM-Verity + +这两个选项都经过了仔细考虑，然而在原始的IPE使用场景 +中，最终选择DM-Verity而非IMA+EVM作为完整性机制，主 +要有三个原因： + + 1. 防护额外的攻击途径 + + * 使用IMA+EVM时，如果没有加密解决方案，系统很容易受到 + 离线攻击，特别是针对上述特定数据文件的攻击。 + + 与可执行文件不同，读取操作（如对受保护数据文件的读 + 取操作）无法强制性进行全局完整性验证。这意味着必须 + 有一种选择机制来决定是否应对某个读取操作实施完整性 + 策略。 + + 在当时，这是通过强制访问控制标签来实现的，IMA策略会 + 指定哪些标签需要进行完整性验证，这带来了一个问题： + EVM虽然可以保护标签，但如果攻击者离线修改文件系统， + 那么攻击者就可以清除所有的扩展属性（xattrs）——包括 + 用于确定文件是否应受完整性策略约束的SELinux标签。 + + 使用DM-Verity，由于xattrs被保存为Merkel树的一部分， + 如果对由dm-verity保护的文件系统进行了离线挂载，校验 + 和将不在匹配，文件将无法读取。 + + * 由于用户空间的二进制文件在Linux中是分页加载的，dm- + verity同样提供了对抗恶意块设备的额外保护。在这样的 + 攻击中，块设备最初报告适当的内容以供IMA哈希计算，通 + 过所需的完整性检查。然后，在访问真实数据时发生的页面 + 错误将报告攻击者的有效载荷。由于dm-verity会在页面错 + 误发生时检查数据（以及磁盘访问），因此这种攻击得到了 + 缓解。 + + 2. 性能: + + * dm-verity在块被读取时按需提供完整性验证，而不需要将整 + 个文件读入内存进行验证。 + + 3. 签名的简化性: + + * 不需要两个签名（IMA 然后是 EVM）：一个签名可以覆盖整个 + 块设备。 + * 签名可以存储在文件系统元数据之外。 + * 该签名支持基于 x.509 的签名基础设施。 + +下一步是选择一个策略来执行完整性验证机制，该策略的最低 +要求是： + + 1. 策略本身必须经过完整性验证（防止针对它的简单攻击）。 + 2. 策略本身必须抵抗回滚攻击。 + 3. 策略执行必须具有类似宽松模式的功能。 + 4. 策略必须能够在不重启的情况下，完整地进行更新。 + 5. 策略更新必须是原子性的。 + 6. 策略必须支持撤销先前创建的组件。 + 7. 策略必须在任何时间点都能进行审计。 + +当时，IMA作为唯一的完整性策略机制，被用来与这些要求进行对比， +但未能满足所有最低要求。尽管考虑过扩展IMA以涵盖这些要求，但 +最终因两个原因被放弃： + + 1. 回归风险；这其中许多变更将导致对已经存在于内核的IMA进行 + 重大代码更改，因此可能会影响用户。 + + 2. IMA在该系统中用于测量和证明；将测量策略与本地完整性策略 + 的执行分离被认为是有利的。 + +由于这些原因，决定创建一个新的LSM，其职责是仅限于本地完整性 +策略的执行。 + +职责和范围 +---------- + +IPE顾名思义，本质上是一种完整性策略执行解决方案；IPE并不强制规定 +如何提供完整性保障，而是将这一决策权留给系统管理员，管理员根据自身 +需求，选择符合的机制来设定安全标准。存在几种不同的完整性解决方案， +它们提供了不同程度的安全保障；而IPE允许系统管理员理论上为所有这些 +解决方案制定策略。 + +IPE自身没有内置确保完整性的固有机制。相反，在构建具备完整性保障能力 +的系统时，存在更高效的分层方案可供使用。需要重点注意的是，用于证明完 +整性的机制，与用于执行完整性声明的策略是相互独立的。 + +因此，IPE依据以下方面进行设计： + + 1. 便于与完整性提供机制集成。 + 2. 便于平台管理员/系统管理员使用。 + +设计理由: +--------- + +IPE是在评估其他操作系统和环境中的现有完整性策略解决方案后设计的。 +在对其他实现的调查中，发现了一些缺陷： + + 1. 策略不易为人们读取，通常需要二进制中间格式。 + 2. 默认情况下会隐式采取单一的、不可定制的操作。 + 3. 调试策略需要手动来确定违反了哪个规则。 + 4. 编写策略需要对更大系统或操作系统有深入的了解。 + +IPE尝试避免所有这些缺陷。 + +策略 +~~~~ + +纯文本 +^^^^^^ + +IPE的策略是纯文本格式的。相较于其他Linux安全模块（LSM）， +策略文件体积略大，但能解决其他平台上部分完整性策略方案存在 +的两个核心问题。 + +第一个问题是代码维护和冗余的问题。为了编写策略，策略必须是 +以某种形式的字符串形式呈现（无论是 XML、JSON、YAML 等结构化 +格式，还是其他形式），以便策略编写者能够理解所写内容。在假设 +的二进制策略设计中，需要一个序列化器将策略将可读的形式转换为 +二进制形式，同时还需要一个反序列化器来将二进制形式转换为内核 +中的数据结构。 + +最终，还需要另一个反序列化器将是必要的，用于将二进制形式转换 +为人类可读的形式，并尽可能保存所有信息，这是因为使用此访问控 +制系统的用户必须维护一个校验表和原始文件，才能理解哪些策略已 +经部署在该系统上，哪些没有。对于单个用户来说，这可能没问题， +因为旧的策略可以在更新生效后很快被丢弃。但对于管理成千上万、 +甚至数十万台计算机的用户，且这些计算机有不同的操作系统和不同 +的操作需求，这很快就成了一个问题，因为数年前的过时策略可能仍然 +存在，从而导致需要快速恢复策略或投资大量基础设施来跟踪每个策略 +的内容。 + +有了这三个独立的序列化器/反序列化器，维护成本非常昂贵。如果策略 +避免使用二进制格式，则只需要一个序列化器；将人类可读的形式转换 +为内核中的数据结构。从而节省了代码维护成本，并保持了可操作性。 + +第二个关于二进制格式的问题是透明性，由于IPE根据系统资源的可信度 +来控制访问，因此其策略也必须可信，以便可以被更改。这是通过签名来 +完成的，这就需要签名过程。签名过程通常具有很高的安全标准，因为 +任何被签名的内容都可以被用来攻击完整性执行系统。签署时，签署者 +必须知道他们在签署什么，二进制策略可能会导致这一点的模糊化；签署 +者看到的只是一个不透明的二进制数据块。另一方面，对于纯文本策略中， +签署者看到的则是实际提交的策略。 + +启动策略 +~~~~~~~~ + +如果配置得当，IPE能够在内核启动并进入用户模式时立即执行策略。 +这意味着需要在用户模式开始的那一刻就存储一定的策略。通常，这种 +存储可以通过一下三种方式之一来处理： + + 1. 策略文件存储在磁盘上，内核在进入可能需要做出执行决策的代码 + 路径之前，先加载该策略。 + 2. 策略文件由引导加载程序传递给内核，内核解析这些策略。 + 3. 将一个策略文件编译到内核中，内核在初始化过程中对其进行解析并 + 执行。 + +第一种方式存在问题：内核从用户空间读取文件通常是不推荐的，并且在 +内核中极为罕见。 + +第二种选项同样存在问题：Linux在其整个生态系统中支持多种引导加载程序， +所有引导加载程序都必须支持这种新方法，或者需要有一个独立的来源，这 +可能会导致内核启动过程发生不必要的重大变化。 + +第三种选项是最佳选择，但需要注意的是，编译进内核的策略会占用磁盘空间。 +重要的是要使这一策略足够通用，以便用户空间能够加载新的、更复杂的策略， +同时也要足够严格，以防止过度授权并避免引发安全问题。 + +initramfs提供了一种建立此启动路径的方法。内核启动时以最小化的策略启动， +该策略仅信任initramfs。在initramfs内，当真实的根文件系统已挂载且尚未 +切换时，它会部署并激活一个信任新根文件系统的策略。这种方法防止了在任何 +步骤中出现过度授权，并保持内核策略的最小化。 + +启动 +^^^^ + +然而，并不是每个系统都以initramfs启动，因此编译进内核的启动策略需要具备 +一定的灵活性，以明确如何为启动的下一个阶段建立信任。为此，如果我们将编译 +进内核的策略设计为一个完整的IPE策略，这样系统构建者便能合理定义第一阶段启 +动的需求。 + +可更新、无需重启的策略 +~~~~~~~~~~~~~~~~~~~~~~ + +随着时间的推移，系统需求发生变化（例如，之前信任的应用程序中发现漏洞、秘钥 +轮换等）。更新内核以满足这些安全目标并非始终是一个合适的选择，因为内核更新并 +非完全无风险的，而搁置安全更新会使系统处于脆弱状态。这意味着IPE需要一个可以 +完全更新的策略（允许撤销现有的策略），并且这个更新来源必须是内核外部的（允许 +再不更新内核的情况下更新策略）。 + +此外，由于内核在调用之间是无状态的，并且从内核空间读取磁盘上的策略文件不是一 +个好主意，因此策略更新必须能够在不重启的情况下完成。 + +为了允许从外部来源进行更新，考虑到外部来源可能是恶意的，因此该策略需要具备可被 +识别为可信的机制。这一机制通过签名链实现：策略的签名需与内核中的某个信任源相 +关联。通常，这个信任源是 ``SYSTEM_TRUSTED_KEYRING`` ，这是一个在内核编译时就被 +初始化填充的密钥环，因为这符合上述编译进来策略的制作者与能够部署策略更新的实体 +相同的预期。 + +防回滚 / 防重放 +~~~~~~~~~~~~~~~ + +随着时间的推移，系统可能会发现漏洞，曾经受信任的资源可能不再可信，IPE的 +策略也不例外。可能会出现的情况是，策略制作者误部署了一个不安全的策略， +随后再用一个安全的策略进行修正。 + +假设一旦不安全的策略被部署，攻击者获取了这个不安全的策略，IPE需要有一种 +方式来防止从安全的策略更新回滚到不安全的策略。 + +最初，IPE的策略可以包含一个policy_version字段，声明系统上所有可激活策略 +所需的最低版本号。这将在系统运行期间防止回滚。 + +.. WARNING:: + + 然而，由于内核每次启动都是无状态的，因此该策略版本将在下次 + 启动时被重置为0.0.0。系统构建者需要意识到这一点，并确保在启 + 动后尽快部署新的安全策略，以确保攻击者部署不安全的策略的几 + 率最小化。 + +隐式操作: +~~~~~~~~~ + +隐式操作的问题只有在考虑系统中多个操作具有不同级别时才会显现出来。 +例如，考虑一个系统，该系统对可执行代码和系统中对其功能至关重要的 +特定数据提供强大的完整性保障。在这个系统中，可能存在三种类型的 +策略： + + 1. 一种策略，在这种策略中，如果操作未能匹配到任何规则，则该操 + 作将被拒绝。 + 2. 一种策略，在这种策略中，如果操作未能匹配到任何规则，则该操 + 作将被允许。 + 3. 一种策略，在这种策略中，如果操作未能匹配到任何规则，则执行 + 操作由策略作者指定。 + +第一种类型的策略示例如下:: + + op=EXECUTE integrity_verified=YES action=ALLOW + +在示例系统中，这对于可执行文件来说效果很好，因为所有可执行文件 +都应该拥有完整性保障。但问题出现在第二个要求上，即关于特定数据 +文件的要求。这将导致如下策略（假设策略按行依次执行）:: + + op=EXECUTE integrity_verified=YES action=ALLOW + + op=READ integrity_verified=NO label=critical_t action=DENY + op=READ action=ALLOW + +若阅读过文档，了解策略按顺序执行且默认动作是拒绝，那么这个策略的 +逻辑还算清晰；但最后一行规则实际上将读取操作的默认动作改成了允许。 +这种设计是必要的，因为在实际系统中，存在一些无需验证的读取操作（例 +如向日志文件追加内容时的读取操作）。 + +第二种策略类型（未匹配任何规则时默认允许）在管控特定数据文件时逻辑 +更清晰，其策略可简化为:: + + op=READ integrity_verified=NO label=critical_t action=DENY + +但与第一种策略类似，这种默认允许的策略在管控执行操作时会存在缺陷， +因此仍需显式覆盖默认动作:: + + op=EXECUTE integrity_verified=YES action=ALLOW + op=EXECUTE action=DENY + + op=READ integrity_verified=NO label=critical_t action=DENY + +这就引出了第三种策略类型（自定义默认动作）。该类型无需让用户绞尽脑汁 +通过空规则覆盖默认动作，而是强制用户根据自身场景思考合适的默认动作是 +什么，并显式声明:: + + DEFAULT op=EXECUTE action=DENY + op=EXECUTE integrity_verified=YES action=ALLOW + + DEFAULT op=READ action=ALLOW + op=READ integrity_verified=NO label=critical_t action=DENY + +策略调试: +~~~~~~~~~ + +在开发策略时，知道策略违反了哪一行有助于减少调试成本；可以 +将调查的范围缩小到导致该行为的确切行。有些完整性策略系统并 +不提供这一信息，而是提供评估过程中使用的信息。这随后需要将 +这些信息和策略进行关联，以分析哪里了问题。 + +相反，IPE只会输出匹配到的规则。这将调查范围限制到确切到策略行 +（在特定规则的情况下）或部分（在DEFAULT规则的情况下）。当在 +评估策略时观察到策略失败时，这可以减少迭代和调查的时间。 + +IPE的策略引擎还被设计成让人类容易理解如何调查策略失败。每一 +行都会按编写顺序进行评估，因此算法非常简单，便于人类重现步 +骤并找出可能导致失败的原因。而在调查其他的系统中，加载策略 +时会进行优化（例如对规则排序）。在这些系统中，调试需要多个 +步骤，而且没有先阅读代码的情况下，终端用户可能无法完全理解 +该算法的原理。 + +简化策略: +~~~~~~~~~ + +最后，IPE的策略是为系统管理员设计的，而不是内核开发人员。 +IPE不涉及单独的LSM钩子（或系统调用），而是涵盖操作。这 +意味着，系统管理员不需要知道像 ``mmap`` 、 ``mprotect`` 、 +``execve`` 和 ``uselib`` 这些系统调用必须有规则进行保护， +而只需要知道他们想要限制代码执行。这减少了由于缺乏对底层 +系统的了解而可能导致的绕过情况；而IPE的维护者作为内核开发 +人员，可以做出正确的选择，确定某些操作是否与这些操作匹配， +以及在什么条件下匹配。 + +实现说明 +-------- + +匿名内存 +~~~~~~~~ + +在IPE中，匿名内存的处理方式与其他任何类型的访问没有区别。当匿 +名内存使用 ``+X`` 映射时，它仍然会进入 ``file_mmp`` 或 +``file_mprotect`` 钩子，但此时会带有一个 ``NULL`` 文件对象 +这会像其他文件一样提交进行评估。然而，所有当前的信任属性都会 +评估为假，因为它们都是基于文件的，而此次操作并不与任何文件相关联。 + +.. WARNING:: + + 这也适用于 ``kernel_load_data`` 钩子，当内核从一个没有文件 + 支持的用户空间缓冲区加载数据时。在这种情况下，所有当前的信任 + 属性也将评估为false。 + +Securityfs接口 +~~~~~~~~~~~~~~ + +每个策略的对应的securityfs树是有些独特的。例如，对于一个标准的 +securityfs策略树:: + + MyPolicy + |- active + |- delete + |- name + |- pkcs7 + |- policy + |- update + |- version + +策略存储在MyPolicy对应节点的 ``->i_private`` 数据中。 + +测试 +---- + +IPE为策略解析器提供了KUnit测试。推荐kunitconfig:: + + CONFIG_KUNIT=y + CONFIG_SECURITY=y + CONFIG_SECURITYFS=y + CONFIG_PKCS7_MESSAGE_PARSER=y + CONFIG_SYSTEM_DATA_VERIFICATION=y + CONFIG_FS_VERITY=y + CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y + CONFIG_BLOCK=y + CONFIG_MD=y + CONFIG_BLK_DEV_DM=y + CONFIG_DM_VERITY=y + CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y + CONFIG_NET=y + CONFIG_AUDIT=y + CONFIG_AUDITSYSCALL=y + CONFIG_BLK_DEV_INITRD=y + + CONFIG_SECURITY_IPE=y + CONFIG_IPE_PROP_DM_VERITY=y + CONFIG_IPE_PROP_DM_VERITY_SIGNATURE=y + CONFIG_IPE_PROP_FS_VERITY=y + CONFIG_IPE_PROP_FS_VERITY_BUILTIN_SIG=y + CONFIG_SECURITY_IPE_KUNIT_TEST=y + +此外，IPE 具有一个基于 Python 的集成 +`测试套件 `_ +可以测试用户界面和强制执行功能。 diff --git a/Documentation/translations/zh_CN/security/lsm-development.rst b/Documentation/translations/zh_CN/security/lsm-development.rst new file mode 100644 index 00000000000000..7ed3719a9d072c --- /dev/null +++ b/Documentation/translations/zh_CN/security/lsm-development.rst @@ -0,0 +1,19 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../disclaimer-zh_CN.rst + +:Original: Documentation/security/lsm-development.rst + +:翻译: + 赵硕 Shuo Zhao + +================= +Linux安全模块开发 +================= + +基于https://lore.kernel.org/r/20071026073721.618b4778@laptopd505.fenrus.org， +当一种新的LSM的意图（它试图防范什么，以及在哪些情况下人们会期望使用它）在 +``Documentation/admin-guide/LSM/`` 中适当记录下来后，就会被接受进入内核。 +这使得LSM的代码可以很轻松的与其目标进行对比，从而让最终用户和发行版可以更 +明智地决定那些LSM适合他们的需求。 + +有关可用的 LSM 钩子接口的详细文档，请参阅 ``security/security.c`` 及相关结构。 diff --git a/Documentation/translations/zh_CN/security/secrets/coco.rst b/Documentation/translations/zh_CN/security/secrets/coco.rst new file mode 100644 index 00000000000000..a27bc1acdb7c0d --- /dev/null +++ b/Documentation/translations/zh_CN/security/secrets/coco.rst @@ -0,0 +1,96 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: ../../disclaimer-zh_CN.rst + +:Original: Documentation/security/secrets/coco.rst + +:翻译: + + 赵硕 Shuo Zhao + +============ +机密计算密钥 +============ + +本文档介绍了在EFI驱动程序和efi_secret内核模块中，机密计算密钥从固件 +到操作系统的注入处理流程。 + +简介 +==== + +机密计算硬件（如AMD SEV，Secure Encrypted Virtualization）允许虚拟机 +所有者将密钥注入虚拟机（VM）内存，且主机/虚拟机监控程序无法读取这些密 +钥。在SEV中，密钥注入需在虚拟机启动流程的早期阶段（客户机开始运行前） +执行。 + +efi_secret内核模块允许用户空间应用程序通过securityfs（安全文件系统）访 +问这些密钥。 + +密钥数据流 +========== + +客户机固件可能会为密钥注入预留一块指定的内存区域，并将该区域的位置（基准 +客户机物理地址GPA和长度）在EFI配置表中，通过 ``LINUX_EFI_COCO_SECRET_AREA_GUID`` +条目（对应的GUID值为 ``adf956ad-e98c-484c-ae11-b51c7d336447`` ）的形式发布。 +固件应将此内存区域标记为 ``EFI_RESERVED_TYPE`` ，因此内核不应将其用于自身用途。 + +虚拟机启动过程中，虚拟机管理器可向该区域注入密钥。在AMD SEV和SEV-ES中，此 +操作通过 ``KVM_SEV_LAUNCH_SECRET`` 命令执行（参见 [sev_CN]_ ）。注入的“客户机 +所有者密钥数据”应采用带GUID的密钥值表结构，其二进制格式在 ``drivers/virt/ +coco/efi_secret/efi_secret.c`` 文件的EFI密钥区域结构部分中有详细描述。 + +内核启动时，内核的EFI驱动程序将保存密钥区域位置（来自EFI配置表）到 ``efi.coco_secret`` +字段。随后，它会检查密钥区域是否已填充：映射该区域并检查其内容是否以 +``EFI_SECRET_TABLE_HEADER_GUID`` （对应的GUID为 ``1e74f542-71dd-4d66-963e-ef4287ff173b`` ） +开头。如果密钥区域已填充，EFI驱动程序将自动加载efi_secret内核模块，并通过securityfs将密钥 +暴露给用户空间应用程序。efi_secret文件系统接口的详细信息请参考 [secrets-coco-abi_CN]_ 。 + + +应用使用示例 +============ + +假设客户机需要对加密文件进行计算处理。客户机所有者通过密钥注入机制提供解密密钥 +（即密钥）。客户机应用程序从efi_secret文件系统读取该密钥，然后将文件解密到内存中， +接着对内容进行需要的计算。 + +在此示例中，主机无法从磁盘镜像中读取文件，因为文件是加密的；主机无法读取解密密钥， +因为它是通过密钥注入机制（即安全通道）传递的；主机也无法读取内存中的解密内容，因为 +这是一个机密型（内存加密）客户机。 + +以下是一个简单的示例，展示了在客户机中使用efi_secret模块的过程，在启动时注入了 +一个包含4个密钥的EFI密钥区域:: + + # ls -la /sys/kernel/security/secrets/coco + total 0 + drwxr-xr-x 2 root root 0 Jun 28 11:54 . + drwxr-xr-x 3 root root 0 Jun 28 11:54 .. + -r--r----- 1 root root 0 Jun 28 11:54 736870e5-84f0-4973-92ec-06879ce3da0b + -r--r----- 1 root root 0 Jun 28 11:54 83c83f7f-1356-4975-8b7e-d3a0b54312c6 + -r--r----- 1 root root 0 Jun 28 11:54 9553f55d-3da2-43ee-ab5d-ff17f78864d2 + -r--r----- 1 root root 0 Jun 28 11:54 e6f5a162-d67f-4750-a67c-5d065f2a9910 + + # hd /sys/kernel/security/secrets/coco/e6f5a162-d67f-4750-a67c-5d065f2a9910 + 00000000 74 68 65 73 65 2d 61 72 65 2d 74 68 65 2d 6b 61 |these-are-the-ka| + 00000010 74 61 2d 73 65 63 72 65 74 73 00 01 02 03 04 05 |ta-secrets......| + 00000020 06 07 |..| + 00000022 + + # rm /sys/kernel/security/secrets/coco/e6f5a162-d67f-4750-a67c-5d065f2a9910 + + # ls -la /sys/kernel/security/secrets/coco + total 0 + drwxr-xr-x 2 root root 0 Jun 28 11:55 . + drwxr-xr-x 3 root root 0 Jun 28 11:54 .. + -r--r----- 1 root root 0 Jun 28 11:54 736870e5-84f0-4973-92ec-06879ce3da0b + -r--r----- 1 root root 0 Jun 28 11:54 83c83f7f-1356-4975-8b7e-d3a0b54312c6 + -r--r----- 1 root root 0 Jun 28 11:54 9553f55d-3da2-43ee-ab5d-ff17f78864d2 + + +参考文献 +======== + +请参见 [sev-api-spec_CN]_ 以获取有关SEV ``LAUNCH_SECRET`` 操作的更多信息。 + +.. [sev_CN] Documentation/virt/kvm/x86/amd-memory-encryption.rst +.. [secrets-coco-abi_CN] Documentation/ABI/testing/securityfs-secrets-coco +.. [sev-api-spec_CN] https://www.amd.com/system/files/TechDocs/55766_SEV-KM_API_Specification.pdf + diff --git a/Documentation/translations/zh_CN/security/secrets/index.rst b/Documentation/translations/zh_CN/security/secrets/index.rst index 5ea78713f10e6e..38464dcb2c3cf8 100644 --- a/Documentation/translations/zh_CN/security/secrets/index.rst +++ b/Documentation/translations/zh_CN/security/secrets/index.rst @@ -5,13 +5,10 @@ :翻译: -===================== +======== 密钥文档 -===================== +======== .. toctree:: - -TODOLIST: - -* coco + coco diff --git a/Documentation/translations/zh_CN/subsystem-apis.rst b/Documentation/translations/zh_CN/subsystem-apis.rst index 8b646c1010be54..830217140fb666 100644 --- a/Documentation/translations/zh_CN/subsystem-apis.rst +++ b/Documentation/translations/zh_CN/subsystem-apis.rst @@ -71,12 +71,11 @@ TODOList: :maxdepth: 1 filesystems/index + scsi/index TODOList: -* block/index * cdrom/index -* scsi/index * target/index **Fixme**: 这里还需要更多的分类组织工作。 diff --git a/Documentation/translations/zh_TW/admin-guide/README.rst b/Documentation/translations/zh_TW/admin-guide/README.rst index 0b038074d9d1fd..c8b7ccfaa656d2 100644 --- a/Documentation/translations/zh_TW/admin-guide/README.rst +++ b/Documentation/translations/zh_TW/admin-guide/README.rst @@ -291,5 +291,5 @@ Documentation/translations/zh_CN/admin-guide/bug-hunting.rst 。 更多用GDB調試內核的信息，請參閱： Documentation/translations/zh_CN/dev-tools/gdb-kernel-debugging.rst -和 Documentation/dev-tools/kgdb.rst 。 +和 Documentation/process/debugging/kgdb.rst 。 diff --git a/Documentation/translations/zh_TW/dev-tools/gdb-kernel-debugging.rst b/Documentation/translations/zh_TW/dev-tools/gdb-kernel-debugging.rst index b595af59ba7859..4fd1757c3036fd 100644 --- a/Documentation/translations/zh_TW/dev-tools/gdb-kernel-debugging.rst +++ b/Documentation/translations/zh_TW/dev-tools/gdb-kernel-debugging.rst @@ -2,7 +2,7 @@ .. include:: ../disclaimer-zh_TW.rst -:Original: Documentation/dev-tools/gdb-kernel-debugging.rst +:Original: Documentation/process/debugging/gdb-kernel-debugging.rst :Translator: 高超 gao chao 通過gdb調試內核和模塊 diff --git a/Documentation/userspace-api/dma-buf-heaps.rst b/Documentation/userspace-api/dma-buf-heaps.rst index 1dfe5e7acd5a3c..05445c83b79a0d 100644 --- a/Documentation/userspace-api/dma-buf-heaps.rst +++ b/Documentation/userspace-api/dma-buf-heaps.rst @@ -16,13 +16,52 @@ following heaps: - The ``system`` heap allocates virtually contiguous, cacheable, buffers. - - The ``cma`` heap allocates physically contiguous, cacheable, - buffers. Only present if a CMA region is present. Such a region is - usually created either through the kernel commandline through the - ``cma`` parameter, a memory region Device-Tree node with the - ``linux,cma-default`` property set, or through the ``CMA_SIZE_MBYTES`` or - ``CMA_SIZE_PERCENTAGE`` Kconfig options. The heap's name in devtmpfs is - ``default_cma_region``. For backwards compatibility, when the - ``DMABUF_HEAPS_CMA_LEGACY`` Kconfig option is set, a duplicate node is - created following legacy naming conventions; the legacy name might be - ``reserved``, ``linux,cma``, or ``default-pool``. + - The ``default_cma_region`` heap allocates physically contiguous, + cacheable, buffers. Only present if a CMA region is present. Such a + region is usually created either through the kernel commandline + through the ``cma`` parameter, a memory region Device-Tree node with + the ``linux,cma-default`` property set, or through the + ``CMA_SIZE_MBYTES`` or ``CMA_SIZE_PERCENTAGE`` Kconfig options. Prior + to Linux 6.17, its name wasn't stable and could be called + ``reserved``, ``linux,cma``, or ``default-pool``, depending on the + platform. + + - A heap will be created for each reusable region in the device tree + with the ``shared-dma-pool`` compatible, using the full device tree + node name as its name. The buffer semantics are identical to + ``default-cma-region``. + +Naming Convention +================= + +``dma-buf`` heaps name should meet a number of constraints: + +- The name must be stable, and must not change from one version to the other. + Userspace identifies heaps by their name, so if the names ever change, we + would be likely to introduce regressions. + +- The name must describe the memory region the heap will allocate from, and + must uniquely identify it in a given platform. Since userspace applications + use the heap name as the discriminant, it must be able to tell which heap it + wants to use reliably if there's multiple heaps. + +- The name must not mention implementation details, such as the allocator. The + heap driver will change over time, and implementation details when it was + introduced might not be relevant in the future. + +- The name should describe properties of the buffers that would be allocated. + Doing so will make heap identification easier for userspace. Such properties + are: + + - ``contiguous`` for physically contiguous buffers; + + - ``protected`` for encrypted buffers not accessible the OS; + +- The name may describe intended usage. Doing so will make heap identification + easier for userspace applications and users. + +For example, assuming a platform with a reserved memory region located +at the RAM address 0x42000000, intended to allocate video framebuffers, +physically contiguous, and backed by the CMA kernel allocator, good +names would be ``memory@42000000-contiguous`` or ``video@42000000``, but +``cma-video`` wouldn't. diff --git a/Documentation/userspace-api/index.rst b/Documentation/userspace-api/index.rst index b8c73be4fb112e..8a61ac4c1bf191 100644 --- a/Documentation/userspace-api/index.rst +++ b/Documentation/userspace-api/index.rst @@ -61,6 +61,7 @@ Everything else :maxdepth: 1 ELF + liveupdate netlink/index sysfs-platform_profile vduse diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst index 7c527a01d1cf5a..7232b3544cecc4 100644 --- a/Documentation/userspace-api/ioctl/ioctl-number.rst +++ b/Documentation/userspace-api/ioctl/ioctl-number.rst @@ -385,6 +385,8 @@ Code Seq# Include File Comments 0xB8 01-02 uapi/misc/mrvl_cn10k_dpi.h Marvell CN10K DPI driver 0xB8 all uapi/linux/mshv.h Microsoft Hyper-V /dev/mshv driver +0xBA 00-0F uapi/linux/liveupdate.h Pasha Tatashin + 0xC0 00-0F linux/usb/iowarrior.h 0xCA 00-0F uapi/misc/cxl.h Dead since 6.15 0xCA 10-2F uapi/misc/ocxl.h diff --git a/Documentation/userspace-api/liveupdate.rst b/Documentation/userspace-api/liveupdate.rst new file mode 100644 index 00000000000000..41c0473e4f1605 --- /dev/null +++ b/Documentation/userspace-api/liveupdate.rst @@ -0,0 +1,20 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================ +Live Update uAPI +================ +:Author: Pasha Tatashin + +ioctl interface +=============== +.. kernel-doc:: kernel/liveupdate/luo_core.c + :doc: LUO ioctl Interface + +ioctl uAPI +=========== +.. kernel-doc:: include/uapi/linux/liveupdate.h + +See Also +======== + +- :doc:`Live Update Orchestrator ` diff --git a/Documentation/userspace-api/media/cec/cec-header.rst b/Documentation/userspace-api/media/cec/cec-header.rst index f67003bb87405c..648498bc7d6fc0 100644 --- a/Documentation/userspace-api/media/cec/cec-header.rst +++ b/Documentation/userspace-api/media/cec/cec-header.rst @@ -2,10 +2,12 @@ .. _cec_header: -*************** -CEC Header File -*************** +**************** +CEC uAPI Symbols +**************** .. kernel-include:: include/uapi/linux/cec.h :generate-cross-refs: :exception-file: cec.h.rst.exceptions + :toc: + :warn-broken: diff --git a/Documentation/userspace-api/media/cec/cec.h.rst.exceptions b/Documentation/userspace-api/media/cec/cec.h.rst.exceptions index 15fa1752d4ef8d..65e8be062bdbe3 100644 --- a/Documentation/userspace-api/media/cec/cec.h.rst.exceptions +++ b/Documentation/userspace-api/media/cec/cec.h.rst.exceptions @@ -1,5 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 +# All symbols belong to CEC namespace +namespace CEC + # Ignore header name ignore define _CEC_UAPI_H diff --git a/Documentation/userspace-api/media/drivers/index.rst b/Documentation/userspace-api/media/drivers/index.rst index d706cb47b1122b..02967c9b18d6e9 100644 --- a/Documentation/userspace-api/media/drivers/index.rst +++ b/Documentation/userspace-api/media/drivers/index.rst @@ -32,6 +32,7 @@ For more details see the file COPYING in the source distribution of Linux. cx2341x-uapi dw100 imx-uapi + mali-c55 max2175 npcm-video omap3isp-uapi diff --git a/Documentation/userspace-api/media/drivers/mali-c55.rst b/Documentation/userspace-api/media/drivers/mali-c55.rst new file mode 100644 index 00000000000000..21148b1878566d --- /dev/null +++ b/Documentation/userspace-api/media/drivers/mali-c55.rst @@ -0,0 +1,55 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +Arm Mali-C55 ISP driver +======================= + +The Arm Mali-C55 ISP driver implements a single driver-specific control: + +``V4L2_CID_MALI_C55_CAPABILITIES (bitmask)`` + Detail the capabilities of the ISP by giving detail about the fitted blocks. + + .. flat-table:: Bitmask meaning definitions + :header-rows: 1 + :widths: 2 4 8 + + * - Bit + - Macro + - Meaning + * - 0 + - MALI_C55_PONG + - Pong configuration space is fitted in the ISP + * - 1 + - MALI_C55_WDR + - WDR Framestitch, offset and gain is fitted in the ISP + * - 2 + - MALI_C55_COMPRESSION + - Temper compression is fitted in the ISP + * - 3 + - MALI_C55_TEMPER + - Temper is fitted in the ISP + * - 4 + - MALI_C55_SINTER_LITE + - Sinter Lite is fitted in the ISP instead of the full Sinter version + * - 5 + - MALI_C55_SINTER + - Sinter is fitted in the ISP + * - 6 + - MALI_C55_IRIDIX_LTM + - Iridix local tone mappine is fitted in the ISP + * - 7 + - MALI_C55_IRIDIX_GTM + - Iridix global tone mapping is fitted in the ISP + * - 8 + - MALI_C55_CNR + - Colour noise reduction is fitted in the ISP + * - 9 + - MALI_C55_FRSCALER + - The full resolution pipe scaler is fitted in the ISP + * - 10 + - MALI_C55_DS_PIPE + - The downscale pipe is fitted in the ISP + + The Mali-C55 ISP can be configured in a number of ways to include or exclude + blocks which may not be necessary. This control provides a way for the + driver to communicate to userspace which of the blocks are fitted in the + design. \ No newline at end of file diff --git a/Documentation/userspace-api/media/dvb/dmx.h.rst.exceptions b/Documentation/userspace-api/media/dvb/dmx.h.rst.exceptions index afc14d384b83ce..2c219388d12359 100644 --- a/Documentation/userspace-api/media/dvb/dmx.h.rst.exceptions +++ b/Documentation/userspace-api/media/dvb/dmx.h.rst.exceptions @@ -1,34 +1,36 @@ # SPDX-License-Identifier: GPL-2.0 +# All symbols belone to this namespace +namespace DTV.dmx + # Ignore header name ignore define _UAPI_DVBDMX_H_ # Ignore limit constants ignore define DMX_FILTER_SIZE -# dmx_pes_type_t enum symbols -replace enum dmx_ts_pes :c:type:`dmx_pes_type` -replace symbol DMX_PES_AUDIO0 :c:type:`dmx_pes_type` -replace symbol DMX_PES_VIDEO0 :c:type:`dmx_pes_type` -replace symbol DMX_PES_TELETEXT0 :c:type:`dmx_pes_type` -replace symbol DMX_PES_SUBTITLE0 :c:type:`dmx_pes_type` -replace symbol DMX_PES_PCR0 :c:type:`dmx_pes_type` -replace symbol DMX_PES_AUDIO1 :c:type:`dmx_pes_type` -replace symbol DMX_PES_VIDEO1 :c:type:`dmx_pes_type` -replace symbol DMX_PES_TELETEXT1 :c:type:`dmx_pes_type` -replace symbol DMX_PES_SUBTITLE1 :c:type:`dmx_pes_type` -replace symbol DMX_PES_PCR1 :c:type:`dmx_pes_type` -replace symbol DMX_PES_AUDIO2 :c:type:`dmx_pes_type` -replace symbol DMX_PES_VIDEO2 :c:type:`dmx_pes_type` -replace symbol DMX_PES_TELETEXT2 :c:type:`dmx_pes_type` -replace symbol DMX_PES_SUBTITLE2 :c:type:`dmx_pes_type` -replace symbol DMX_PES_PCR2 :c:type:`dmx_pes_type` -replace symbol DMX_PES_AUDIO3 :c:type:`dmx_pes_type` -replace symbol DMX_PES_VIDEO3 :c:type:`dmx_pes_type` -replace symbol DMX_PES_TELETEXT3 :c:type:`dmx_pes_type` -replace symbol DMX_PES_SUBTITLE3 :c:type:`dmx_pes_type` -replace symbol DMX_PES_PCR3 :c:type:`dmx_pes_type` -replace symbol DMX_PES_OTHER :c:type:`dmx_pes_type` +# dmx_ts_pes_type_t enum symbols +replace symbol DMX_PES_AUDIO0 :c:type:`DTV.dmx.dmx_ts_pes` +replace symbol DMX_PES_VIDEO0 :c:type:`DTV.dmx.dmx_ts_pes` +replace symbol DMX_PES_TELETEXT0 :c:type:`DTV.dmx.dmx_ts_pes` +replace symbol DMX_PES_SUBTITLE0 :c:type:`DTV.dmx.dmx_ts_pes` +replace symbol DMX_PES_PCR0 :c:type:`DTV.dmx.dmx_ts_pes` +replace symbol DMX_PES_AUDIO1 :c:type:`DTV.dmx.dmx_ts_pes` +replace symbol DMX_PES_VIDEO1 :c:type:`DTV.dmx.dmx_ts_pes` +replace symbol DMX_PES_TELETEXT1 :c:type:`DTV.dmx.dmx_ts_pes` +replace symbol DMX_PES_SUBTITLE1 :c:type:`DTV.dmx.dmx_ts_pes` +replace symbol DMX_PES_PCR1 :c:type:`DTV.dmx.dmx_ts_pes` +replace symbol DMX_PES_AUDIO2 :c:type:`DTV.dmx.dmx_ts_pes` +replace symbol DMX_PES_VIDEO2 :c:type:`DTV.dmx.dmx_ts_pes` +replace symbol DMX_PES_TELETEXT2 :c:type:`DTV.dmx.dmx_ts_pes` +replace symbol DMX_PES_SUBTITLE2 :c:type:`DTV.dmx.dmx_ts_pes` +replace symbol DMX_PES_PCR2 :c:type:`DTV.dmx.dmx_ts_pes` +replace symbol DMX_PES_AUDIO3 :c:type:`DTV.dmx.dmx_ts_pes` +replace symbol DMX_PES_VIDEO3 :c:type:`DTV.dmx.dmx_ts_pes` +replace symbol DMX_PES_TELETEXT3 :c:type:`DTV.dmx.dmx_ts_pes` +replace symbol DMX_PES_SUBTITLE3 :c:type:`DTV.dmx.dmx_ts_pes` +replace symbol DMX_PES_PCR3 :c:type:`DTV.dmx.dmx_ts_pes` +replace symbol DMX_PES_OTHER :c:type:`DTV.dmx.dmx_ts_pes` # Ignore obsolete symbols ignore define DMX_PES_AUDIO @@ -38,29 +40,23 @@ ignore define DMX_PES_SUBTITLE ignore define DMX_PES_PCR # dmx_input_t symbols -replace enum dmx_input :c:type:`dmx_input` -replace symbol DMX_IN_FRONTEND :c:type:`dmx_input` -replace symbol DMX_IN_DVR :c:type:`dmx_input` +replace symbol DMX_IN_FRONTEND :c:enum:`DTV.dmx.dmx_input` +replace symbol DMX_IN_DVR :c:enum:`DTV.dmx.dmx_input` # Flags for struct dmx_sct_filter_params -replace define DMX_CHECK_CRC :c:type:`dmx_sct_filter_params` -replace define DMX_ONESHOT :c:type:`dmx_sct_filter_params` -replace define DMX_IMMEDIATE_START :c:type:`dmx_sct_filter_params` - -# some typedefs should point to struct/enums -replace typedef dmx_filter_t :c:type:`dmx_filter` -replace typedef dmx_pes_type_t :c:type:`dmx_pes_type` -replace typedef dmx_input_t :c:type:`dmx_input` - -replace symbol DMX_BUFFER_FLAG_HAD_CRC32_DISCARD :c:type:`dmx_buffer_flags` -replace symbol DMX_BUFFER_FLAG_TEI :c:type:`dmx_buffer_flags` -replace symbol DMX_BUFFER_PKT_COUNTER_MISMATCH :c:type:`dmx_buffer_flags` -replace symbol DMX_BUFFER_FLAG_DISCONTINUITY_DETECTED :c:type:`dmx_buffer_flags` -replace symbol DMX_BUFFER_FLAG_DISCONTINUITY_INDICATOR :c:type:`dmx_buffer_flags` - -replace symbol DMX_OUT_DECODER :c:type:`dmx_output` -replace symbol DMX_OUT_TAP :c:type:`dmx_output` -replace symbol DMX_OUT_TS_TAP :c:type:`dmx_output` -replace symbol DMX_OUT_TSDEMUX_TAP :c:type:`dmx_output` +replace define DMX_CHECK_CRC :c:type:`DTV.dmx.dmx_sct_filter_params` +replace define DMX_ONESHOT :c:type:`DTV.dmx.dmx_sct_filter_params` +replace define DMX_IMMEDIATE_START :c:type:`DTV.dmx.dmx_sct_filter_params` + +replace symbol DMX_BUFFER_FLAG_HAD_CRC32_DISCARD :c:type:`DTV.dmx.dmx_buffer_flags` +replace symbol DMX_BUFFER_FLAG_TEI :c:type:`DTV.dmx.dmx_buffer_flags` +replace symbol DMX_BUFFER_PKT_COUNTER_MISMATCH :c:type:`DTV.dmx.dmx_buffer_flags` +replace symbol DMX_BUFFER_FLAG_DISCONTINUITY_DETECTED :c:type:`DTV.dmx.dmx_buffer_flags` +replace symbol DMX_BUFFER_FLAG_DISCONTINUITY_INDICATOR :c:type:`DTV.dmx.dmx_buffer_flags` + +replace symbol DMX_OUT_DECODER :c:type:`DTV.dmx.dmx_output` +replace symbol DMX_OUT_TAP :c:type:`DTV.dmx.dmx_output` +replace symbol DMX_OUT_TS_TAP :c:type:`DTV.dmx.dmx_output` +replace symbol DMX_OUT_TSDEMUX_TAP :c:type:`DTV.dmx.dmx_output` replace ioctl DMX_DQBUF dmx_qbuf diff --git a/Documentation/userspace-api/media/dvb/dmx_types.rst b/Documentation/userspace-api/media/dvb/dmx_types.rst index 33458fbb84ab68..dd76010696c84b 100644 --- a/Documentation/userspace-api/media/dvb/dmx_types.rst +++ b/Documentation/userspace-api/media/dvb/dmx_types.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: DTV.dmx .. _dmx_types: diff --git a/Documentation/userspace-api/media/dvb/frontend.h.rst.exceptions b/Documentation/userspace-api/media/dvb/frontend.h.rst.exceptions index dcaf5740de7ec2..cecd4087d4bef6 100644 --- a/Documentation/userspace-api/media/dvb/frontend.h.rst.exceptions +++ b/Documentation/userspace-api/media/dvb/frontend.h.rst.exceptions @@ -28,13 +28,14 @@ ignore define MAX_DTV_STATS ignore define DTV_IOCTL_MAX_MSGS # the same reference is used for both get and set ioctls -replace ioctl FE_SET_PROPERTY :c:type:`FE_GET_PROPERTY` +replace ioctl FE_SET_PROPERTY :ref:`FE_GET_PROPERTY` +replace ioctl FE_GET_PROPERTY :ref:`FE_GET_PROPERTY` # Typedefs that use the enum reference replace typedef fe_sec_voltage_t :c:type:`fe_sec_voltage` # Replaces for flag constants -replace define FE_TUNE_MODE_ONESHOT :c:func:`FE_SET_FRONTEND_TUNE_MODE` +replace define FE_TUNE_MODE_ONESHOT :ref:`FE_SET_FRONTEND_TUNE_MODE` replace define LNA_AUTO dtv-lna replace define NO_STREAM_ID_FILTER dtv-stream-id diff --git a/Documentation/userspace-api/media/dvb/headers.rst b/Documentation/userspace-api/media/dvb/headers.rst index c75f64cf21d5a7..6d69622bf1e009 100644 --- a/Documentation/userspace-api/media/dvb/headers.rst +++ b/Documentation/userspace-api/media/dvb/headers.rst @@ -1,25 +1,46 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later -**************************** -Digital TV uAPI header files -**************************** - -Digital TV uAPI headers *********************** +Digital TV uAPI symbols +*********************** + +.. contents:: Table of Contents + :depth: 2 + :local: + +Frontend +======== .. kernel-include:: include/uapi/linux/dvb/frontend.h :generate-cross-refs: :exception-file: frontend.h.rst.exceptions + :toc: + :warn-broken: + +Demux +===== .. kernel-include:: include/uapi/linux/dvb/dmx.h :generate-cross-refs: :exception-file: dmx.h.rst.exceptions + :toc: + :warn-broken: + +Conditional Access +================== .. kernel-include:: include/uapi/linux/dvb/ca.h :generate-cross-refs: :exception-file: ca.h.rst.exceptions + :toc: + :warn-broken: + +Network +======= .. kernel-include:: include/uapi/linux/dvb/net.h :generate-cross-refs: :exception-file: net.h.rst.exceptions + :toc: + :warn-broken: diff --git a/Documentation/userspace-api/media/mediactl/media-header.rst b/Documentation/userspace-api/media/mediactl/media-header.rst index d561d2845f3d7f..a47ac5b2e99b9a 100644 --- a/Documentation/userspace-api/media/mediactl/media-header.rst +++ b/Documentation/userspace-api/media/mediactl/media-header.rst @@ -2,10 +2,12 @@ .. _media_header: -**************************** -Media Controller Header File -**************************** +***************************** +Media controller uAPI symbols +***************************** .. kernel-include:: include/uapi/linux/media.h :generate-cross-refs: :exception-file: media.h.rst.exceptions + :toc: + :warn-broken: diff --git a/Documentation/userspace-api/media/mediactl/media.h.rst.exceptions b/Documentation/userspace-api/media/mediactl/media.h.rst.exceptions index 9b4c26502d95c5..09aaec2b471807 100644 --- a/Documentation/userspace-api/media/mediactl/media.h.rst.exceptions +++ b/Documentation/userspace-api/media/mediactl/media.h.rst.exceptions @@ -1,5 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 +# All symbols are mapped inside MC C domain namespace +namespace MC + # Ignore header name ignore define __LINUX_MEDIA_H diff --git a/Documentation/userspace-api/media/rc/lirc-header.rst b/Documentation/userspace-api/media/rc/lirc-header.rst index a53328327847cf..ba499262568483 100644 --- a/Documentation/userspace-api/media/rc/lirc-header.rst +++ b/Documentation/userspace-api/media/rc/lirc-header.rst @@ -2,11 +2,19 @@ .. _lirc_header: -**************** -LIRC Header File -**************** +***************** +LIRC uAPI symbols +***************** + +.. contents:: Table of Contents + :depth: 2 + :local: + + .. kernel-include:: include/uapi/linux/lirc.h :generate-cross-refs: :exception-file: lirc.h.rst.exceptions + :toc: + :warn-broken: diff --git a/Documentation/userspace-api/media/v4l/app-pri.rst b/Documentation/userspace-api/media/v4l/app-pri.rst index 626a42f2e13879..47d96cd64525a4 100644 --- a/Documentation/userspace-api/media/v4l/app-pri.rst +++ b/Documentation/userspace-api/media/v4l/app-pri.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _app-pri: diff --git a/Documentation/userspace-api/media/v4l/audio.rst b/Documentation/userspace-api/media/v4l/audio.rst index 17f0b1c899081f..3b424440e478a1 100644 --- a/Documentation/userspace-api/media/v4l/audio.rst +++ b/Documentation/userspace-api/media/v4l/audio.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _audio: diff --git a/Documentation/userspace-api/media/v4l/biblio.rst b/Documentation/userspace-api/media/v4l/biblio.rst index 856acf6a890cdf..9721247e66ef88 100644 --- a/Documentation/userspace-api/media/v4l/biblio.rst +++ b/Documentation/userspace-api/media/v4l/biblio.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L ********** References diff --git a/Documentation/userspace-api/media/v4l/buffer.rst b/Documentation/userspace-api/media/v4l/buffer.rst index 856874341882fb..94dc2719e90713 100644 --- a/Documentation/userspace-api/media/v4l/buffer.rst +++ b/Documentation/userspace-api/media/v4l/buffer.rst @@ -667,6 +667,8 @@ Buffer Flags exposure of the frame has begun. This is only valid for the ``V4L2_BUF_TYPE_VIDEO_CAPTURE`` buffer type. +.. c:enum:: v4l2_memory + .. raw:: latex \normalsize diff --git a/Documentation/userspace-api/media/v4l/capture-example.rst b/Documentation/userspace-api/media/v4l/capture-example.rst index 25891320b7adbb..f018a654f59cdf 100644 --- a/Documentation/userspace-api/media/v4l/capture-example.rst +++ b/Documentation/userspace-api/media/v4l/capture-example.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _capture-example: diff --git a/Documentation/userspace-api/media/v4l/capture.c.rst b/Documentation/userspace-api/media/v4l/capture.c.rst index 349541b1dac03e..aae17e1e844ab3 100644 --- a/Documentation/userspace-api/media/v4l/capture.c.rst +++ b/Documentation/userspace-api/media/v4l/capture.c.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L file: media/v4l/capture.c ========================= diff --git a/Documentation/userspace-api/media/v4l/colorspaces-defs.rst b/Documentation/userspace-api/media/v4l/colorspaces-defs.rst index fe9f8aa8ab9de2..0b40e735f3bf4d 100644 --- a/Documentation/userspace-api/media/v4l/colorspaces-defs.rst +++ b/Documentation/userspace-api/media/v4l/colorspaces-defs.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L **************************** Defining Colorspaces in V4L2 diff --git a/Documentation/userspace-api/media/v4l/colorspaces-details.rst b/Documentation/userspace-api/media/v4l/colorspaces-details.rst index 26a4ace42ca5df..f29b0e3978bcbf 100644 --- a/Documentation/userspace-api/media/v4l/colorspaces-details.rst +++ b/Documentation/userspace-api/media/v4l/colorspaces-details.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L ******************************** Detailed Colorspace Descriptions diff --git a/Documentation/userspace-api/media/v4l/colorspaces.rst b/Documentation/userspace-api/media/v4l/colorspaces.rst index 2aa0dda4fd01eb..11954d7cf999ef 100644 --- a/Documentation/userspace-api/media/v4l/colorspaces.rst +++ b/Documentation/userspace-api/media/v4l/colorspaces.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _colorspaces: diff --git a/Documentation/userspace-api/media/v4l/common-defs.rst b/Documentation/userspace-api/media/v4l/common-defs.rst index 6ae42ac7ddb7f2..329ba6ec760b9b 100644 --- a/Documentation/userspace-api/media/v4l/common-defs.rst +++ b/Documentation/userspace-api/media/v4l/common-defs.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _common-defs: diff --git a/Documentation/userspace-api/media/v4l/common.rst b/Documentation/userspace-api/media/v4l/common.rst index ea0435182e44b5..507c35fec8ce9e 100644 --- a/Documentation/userspace-api/media/v4l/common.rst +++ b/Documentation/userspace-api/media/v4l/common.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _common: diff --git a/Documentation/userspace-api/media/v4l/compat.rst b/Documentation/userspace-api/media/v4l/compat.rst index b63b8392dec6ca..f766ea89f9ff54 100644 --- a/Documentation/userspace-api/media/v4l/compat.rst +++ b/Documentation/userspace-api/media/v4l/compat.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _compat: diff --git a/Documentation/userspace-api/media/v4l/control.rst b/Documentation/userspace-api/media/v4l/control.rst index 9253cc946f02af..19372bb32c4b64 100644 --- a/Documentation/userspace-api/media/v4l/control.rst +++ b/Documentation/userspace-api/media/v4l/control.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _control: diff --git a/Documentation/userspace-api/media/v4l/crop.rst b/Documentation/userspace-api/media/v4l/crop.rst index 3fe185e25ccff5..c5f389aca275cc 100644 --- a/Documentation/userspace-api/media/v4l/crop.rst +++ b/Documentation/userspace-api/media/v4l/crop.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _crop: diff --git a/Documentation/userspace-api/media/v4l/depth-formats.rst b/Documentation/userspace-api/media/v4l/depth-formats.rst index b4f3fc229c8557..bd61064d51d37f 100644 --- a/Documentation/userspace-api/media/v4l/depth-formats.rst +++ b/Documentation/userspace-api/media/v4l/depth-formats.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _depth-formats: diff --git a/Documentation/userspace-api/media/v4l/dev-decoder.rst b/Documentation/userspace-api/media/v4l/dev-decoder.rst index ef8e8cf31f9053..eb662ced0ab481 100644 --- a/Documentation/userspace-api/media/v4l/dev-decoder.rst +++ b/Documentation/userspace-api/media/v4l/dev-decoder.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GPL-2.0 +.. c:namespace:: V4L .. _decoder: diff --git a/Documentation/userspace-api/media/v4l/dev-encoder.rst b/Documentation/userspace-api/media/v4l/dev-encoder.rst index 6c523c69bdce14..cdad276d00bce6 100644 --- a/Documentation/userspace-api/media/v4l/dev-encoder.rst +++ b/Documentation/userspace-api/media/v4l/dev-encoder.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _encoder: diff --git a/Documentation/userspace-api/media/v4l/dev-event.rst b/Documentation/userspace-api/media/v4l/dev-event.rst index f34f9cf6ce6c0c..f61d774f015345 100644 --- a/Documentation/userspace-api/media/v4l/dev-event.rst +++ b/Documentation/userspace-api/media/v4l/dev-event.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _event: diff --git a/Documentation/userspace-api/media/v4l/dev-mem2mem.rst b/Documentation/userspace-api/media/v4l/dev-mem2mem.rst index 7041bb3d5b8dd3..6058eeaefca4c9 100644 --- a/Documentation/userspace-api/media/v4l/dev-mem2mem.rst +++ b/Documentation/userspace-api/media/v4l/dev-mem2mem.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _mem2mem: diff --git a/Documentation/userspace-api/media/v4l/dev-meta.rst b/Documentation/userspace-api/media/v4l/dev-meta.rst index 5eee9ab60395e8..da706d01b80882 100644 --- a/Documentation/userspace-api/media/v4l/dev-meta.rst +++ b/Documentation/userspace-api/media/v4l/dev-meta.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _metadata: diff --git a/Documentation/userspace-api/media/v4l/dev-osd.rst b/Documentation/userspace-api/media/v4l/dev-osd.rst index 8e4be9129e7517..f37450b1b631a5 100644 --- a/Documentation/userspace-api/media/v4l/dev-osd.rst +++ b/Documentation/userspace-api/media/v4l/dev-osd.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _osd: diff --git a/Documentation/userspace-api/media/v4l/dev-overlay.rst b/Documentation/userspace-api/media/v4l/dev-overlay.rst index d52977120b419c..b7f4302eee6e13 100644 --- a/Documentation/userspace-api/media/v4l/dev-overlay.rst +++ b/Documentation/userspace-api/media/v4l/dev-overlay.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _overlay: diff --git a/Documentation/userspace-api/media/v4l/dev-radio.rst b/Documentation/userspace-api/media/v4l/dev-radio.rst index 284ce96a16377c..843a2151f47070 100644 --- a/Documentation/userspace-api/media/v4l/dev-radio.rst +++ b/Documentation/userspace-api/media/v4l/dev-radio.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _radio: diff --git a/Documentation/userspace-api/media/v4l/dev-sdr.rst b/Documentation/userspace-api/media/v4l/dev-sdr.rst index dfdeddbca41f3e..99907adc0628c2 100644 --- a/Documentation/userspace-api/media/v4l/dev-sdr.rst +++ b/Documentation/userspace-api/media/v4l/dev-sdr.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _sdr: diff --git a/Documentation/userspace-api/media/v4l/dev-stateless-decoder.rst b/Documentation/userspace-api/media/v4l/dev-stateless-decoder.rst index 35ed05f2695e68..e311f0c13272c2 100644 --- a/Documentation/userspace-api/media/v4l/dev-stateless-decoder.rst +++ b/Documentation/userspace-api/media/v4l/dev-stateless-decoder.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GPL-2.0 +.. c:namespace:: V4L .. _stateless_decoder: diff --git a/Documentation/userspace-api/media/v4l/dev-subdev.rst b/Documentation/userspace-api/media/v4l/dev-subdev.rst index 225a45fef994c9..2530170a56aec6 100644 --- a/Documentation/userspace-api/media/v4l/dev-subdev.rst +++ b/Documentation/userspace-api/media/v4l/dev-subdev.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _subdev: diff --git a/Documentation/userspace-api/media/v4l/dev-touch.rst b/Documentation/userspace-api/media/v4l/dev-touch.rst index a71b9def5d58bc..808957cd9afc53 100644 --- a/Documentation/userspace-api/media/v4l/dev-touch.rst +++ b/Documentation/userspace-api/media/v4l/dev-touch.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _touch: diff --git a/Documentation/userspace-api/media/v4l/devices.rst b/Documentation/userspace-api/media/v4l/devices.rst index 8bfbad65a9d445..d4790b9ef81a50 100644 --- a/Documentation/userspace-api/media/v4l/devices.rst +++ b/Documentation/userspace-api/media/v4l/devices.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _devices: diff --git a/Documentation/userspace-api/media/v4l/dv-timings.rst b/Documentation/userspace-api/media/v4l/dv-timings.rst index 4b19bcb4bd80d0..9f117c82df1b28 100644 --- a/Documentation/userspace-api/media/v4l/dv-timings.rst +++ b/Documentation/userspace-api/media/v4l/dv-timings.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _dv-timings: diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst index cdc515c6046831..b4daa7e28dc0d8 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _camera-controls: diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst index 0da635691fdcbd..497ae74379f6cc 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec-stateless.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _codec-stateless-controls: diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst index 4a379bd9e3fbdb..c8890cb5e00ac0 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _codec-controls: diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-colorimetry.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-colorimetry.rst index 1e7265155715b2..38a4136d7220e3 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-colorimetry.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-colorimetry.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _colorimetry-controls: diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-detect.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-detect.rst index 312c4fa94dc3ef..ee2b7e37c1d984 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-detect.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-detect.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _detect-controls: diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-dv.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-dv.rst index d2794e03ac6d67..5918dde83efb32 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-dv.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-dv.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _dv-controls: diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-flash.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-flash.rst index d22c5efb806a18..bd024ab461a404 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-flash.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-flash.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _flash-controls: diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-fm-rx.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-fm-rx.rst index ccd439e9e0e3e1..b7284768f7ea19 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-fm-rx.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-fm-rx.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _fm-rx-controls: diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-fm-tx.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-fm-tx.rst index cb40cf4cc3ec52..7143a4c08f78f5 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-fm-tx.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-fm-tx.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _fm-tx-controls: diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-image-process.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-image-process.rst index 27803dca8d3e13..6d516f041ca254 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-image-process.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-image-process.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _image-process-controls: diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-image-source.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-image-source.rst index 71f23f131f97a7..f9c0b7ad3b4e46 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-image-source.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-image-source.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _image-source-controls: diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-jpeg.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-jpeg.rst index 522095c0846961..b114650bca5b1f 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-jpeg.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-jpeg.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _jpeg-controls: diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-rf-tuner.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-rf-tuner.rst index 8a6f9f0373ffe3..f50802a1c4d4cf 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-rf-tuner.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-rf-tuner.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _rf-tuner-controls: diff --git a/Documentation/userspace-api/media/v4l/extended-controls.rst b/Documentation/userspace-api/media/v4l/extended-controls.rst index 44fcd67f20bf14..5fe71da6afc0e7 100644 --- a/Documentation/userspace-api/media/v4l/extended-controls.rst +++ b/Documentation/userspace-api/media/v4l/extended-controls.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _extended-controls: diff --git a/Documentation/userspace-api/media/v4l/field-order.rst b/Documentation/userspace-api/media/v4l/field-order.rst index 9a0ed8fc550f3e..2a01852513b3b6 100644 --- a/Documentation/userspace-api/media/v4l/field-order.rst +++ b/Documentation/userspace-api/media/v4l/field-order.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _field-order: diff --git a/Documentation/userspace-api/media/v4l/fourcc.rst b/Documentation/userspace-api/media/v4l/fourcc.rst index d3482c40da621a..5cea7008814fe1 100644 --- a/Documentation/userspace-api/media/v4l/fourcc.rst +++ b/Documentation/userspace-api/media/v4l/fourcc.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GPL-2.0 +.. c:namespace:: V4L Guidelines for Video4Linux pixel format 4CCs ============================================ diff --git a/Documentation/userspace-api/media/v4l/hsv-formats.rst b/Documentation/userspace-api/media/v4l/hsv-formats.rst index d810c914b67352..f0731de6f038c9 100644 --- a/Documentation/userspace-api/media/v4l/hsv-formats.rst +++ b/Documentation/userspace-api/media/v4l/hsv-formats.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _hsv-formats: diff --git a/Documentation/userspace-api/media/v4l/libv4l.rst b/Documentation/userspace-api/media/v4l/libv4l.rst index f446dd2d01ac61..ce7a0400891c06 100644 --- a/Documentation/userspace-api/media/v4l/libv4l.rst +++ b/Documentation/userspace-api/media/v4l/libv4l.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _libv4l: diff --git a/Documentation/userspace-api/media/v4l/meta-formats.rst b/Documentation/userspace-api/media/v4l/meta-formats.rst index 0de80328c36bf1..3e0cab153f0ac5 100644 --- a/Documentation/userspace-api/media/v4l/meta-formats.rst +++ b/Documentation/userspace-api/media/v4l/meta-formats.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _meta-formats: @@ -12,6 +13,7 @@ These formats are used for the :ref:`metadata` interface only. .. toctree:: :maxdepth: 1 + metafmt-arm-mali-c55 metafmt-c3-isp metafmt-d4xx metafmt-generic @@ -24,3 +26,4 @@ These formats are used for the :ref:`metadata` interface only. metafmt-vivid metafmt-vsp1-hgo metafmt-vsp1-hgt + v4l2-isp diff --git a/Documentation/userspace-api/media/v4l/metafmt-arm-mali-c55.rst b/Documentation/userspace-api/media/v4l/metafmt-arm-mali-c55.rst new file mode 100644 index 00000000000000..696e0a645a7e05 --- /dev/null +++ b/Documentation/userspace-api/media/v4l/metafmt-arm-mali-c55.rst @@ -0,0 +1,84 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _v4l2-meta-fmt-mali-c55-params: +.. _v4l2-meta-fmt-mali-c55-stats: + +***************************************************************************** +V4L2_META_FMT_MALI_C55_STATS ('C55S'), V4L2_META_FMT_MALI_C55_PARAMS ('C55P') +***************************************************************************** + +3A Statistics +============= + +The ISP device collects different statistics over an input bayer frame. Those +statistics can be obtained by userspace from the +:ref:`mali-c55 3a stats ` metadata capture video node, using +the :c:type:`v4l2_meta_format` interface. The buffer contains a single instance +of the C structure :c:type:`mali_c55_stats_buffer` defined in +``mali-c55-config.h``, so the structure can be obtained from the buffer by: + +.. code-block:: C + + struct mali_c55_stats_buffer *stats = + (struct mali_c55_stats_buffer *)buf; + +For details of the statistics see :c:type:`mali_c55_stats_buffer`. + +Configuration Parameters +======================== + +The configuration parameters are passed to the :ref:`mali-c55 3a params +` metadata output video node, using the +:c:type:`v4l2_meta_format` interface. Rather than a single struct containing +sub-structs for each configurable area of the ISP, parameters for the Mali-C55 +use the v4l2-isp parameters system, through which groups of parameters are +defined as distinct structs or "blocks" which may be added to the data member of +:c:type:`v4l2_isp_params_buffer`. Userspace is responsible for populating the +data member with the blocks that need to be configured by the driver. Each +block-specific struct embeds :c:type:`v4l2_isp_params_block_header` as its first +member and userspace must populate the type member with a value from +:c:type:`mali_c55_param_block_type`. + +.. code-block:: c + + struct v4l2_isp_params_buffer *params = + (struct v4l2_isp_params_buffer *)buffer; + + params->version = MALI_C55_PARAM_BUFFER_V1; + params->data_size = 0; + + void *data = (void *)params->data; + + struct mali_c55_params_awb_gains *gains = + (struct mali_c55_params_awb_gains *)data; + + gains->header.type = MALI_C55_PARAM_BLOCK_AWB_GAINS; + gains->header.flags |= V4L2_ISP_PARAMS_FL_BLOCK_ENABLE; + gains->header.size = sizeof(struct mali_c55_params_awb_gains); + + gains->gain00 = 256; + gains->gain00 = 256; + gains->gain00 = 256; + gains->gain00 = 256; + + data += sizeof(struct mali_c55_params_awb_gains); + params->data_size += sizeof(struct mali_c55_params_awb_gains); + + struct mali_c55_params_sensor_off_preshading *blc = + (struct mali_c55_params_sensor_off_preshading *)data; + + blc->header.type = MALI_C55_PARAM_BLOCK_SENSOR_OFFS; + blc->header.flags |= V4L2_ISP_PARAMS_FL_BLOCK_ENABLE; + blc->header.size = sizeof(struct mali_c55_params_sensor_off_preshading); + + blc->chan00 = 51200; + blc->chan01 = 51200; + blc->chan10 = 51200; + blc->chan11 = 51200; + + params->data_size += sizeof(struct mali_c55_params_sensor_off_preshading); + +Arm Mali-C55 uAPI data types +============================ + +.. kernel-doc:: include/uapi/linux/media/arm/mali-c55-config.h diff --git a/Documentation/userspace-api/media/v4l/metafmt-c3-isp.rst b/Documentation/userspace-api/media/v4l/metafmt-c3-isp.rst index 449b45c2ec248e..24359601ae25e0 100644 --- a/Documentation/userspace-api/media/v4l/metafmt-c3-isp.rst +++ b/Documentation/userspace-api/media/v4l/metafmt-c3-isp.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: (GPL-2.0-only OR MIT) +.. c:namespace:: V4L .. _v4l2-meta-fmt-c3isp-stats: .. _v4l2-meta-fmt-c3isp-params: diff --git a/Documentation/userspace-api/media/v4l/metafmt-d4xx.rst b/Documentation/userspace-api/media/v4l/metafmt-d4xx.rst index 0686413b16b27d..d716170bb795a5 100644 --- a/Documentation/userspace-api/media/v4l/metafmt-d4xx.rst +++ b/Documentation/userspace-api/media/v4l/metafmt-d4xx.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _v4l2-meta-fmt-d4xx: diff --git a/Documentation/userspace-api/media/v4l/metafmt-generic.rst b/Documentation/userspace-api/media/v4l/metafmt-generic.rst index 39d529c910a87e..23f69e1a1afa89 100644 --- a/Documentation/userspace-api/media/v4l/metafmt-generic.rst +++ b/Documentation/userspace-api/media/v4l/metafmt-generic.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L ******************************************************************************************************************************************************************************************************************************************************************************** V4L2_META_FMT_GENERIC_8 ('MET8'), V4L2_META_FMT_GENERIC_CSI2_10 ('MC1A'), V4L2_META_FMT_GENERIC_CSI2_12 ('MC1C'), V4L2_META_FMT_GENERIC_CSI2_14 ('MC1E'), V4L2_META_FMT_GENERIC_CSI2_16 ('MC1G'), V4L2_META_FMT_GENERIC_CSI2_20 ('MC1K'), V4L2_META_FMT_GENERIC_CSI2_24 ('MC1O') diff --git a/Documentation/userspace-api/media/v4l/metafmt-intel-ipu3.rst b/Documentation/userspace-api/media/v4l/metafmt-intel-ipu3.rst index 84d81dd7a7b5e7..c11d17e5a286ae 100644 --- a/Documentation/userspace-api/media/v4l/metafmt-intel-ipu3.rst +++ b/Documentation/userspace-api/media/v4l/metafmt-intel-ipu3.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _v4l2-meta-fmt-params: .. _v4l2-meta-fmt-stat-3a: diff --git a/Documentation/userspace-api/media/v4l/metafmt-pisp-be.rst b/Documentation/userspace-api/media/v4l/metafmt-pisp-be.rst index 3281fe366c8691..e230177910f41a 100644 --- a/Documentation/userspace-api/media/v4l/metafmt-pisp-be.rst +++ b/Documentation/userspace-api/media/v4l/metafmt-pisp-be.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GPL-2.0 +.. c:namespace:: V4L .. _v4l2-meta-fmt-rpi-be-cfg: diff --git a/Documentation/userspace-api/media/v4l/metafmt-pisp-fe.rst b/Documentation/userspace-api/media/v4l/metafmt-pisp-fe.rst index fddeada83e4afb..a2aa5c4c2920e6 100644 --- a/Documentation/userspace-api/media/v4l/metafmt-pisp-fe.rst +++ b/Documentation/userspace-api/media/v4l/metafmt-pisp-fe.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GPL-2.0 +.. c:namespace:: V4L .. _v4l2-meta-fmt-rpi-fe-cfg: diff --git a/Documentation/userspace-api/media/v4l/metafmt-rkisp1.rst b/Documentation/userspace-api/media/v4l/metafmt-rkisp1.rst index 959f6bde8695a3..d3c899b0150b7c 100644 --- a/Documentation/userspace-api/media/v4l/metafmt-rkisp1.rst +++ b/Documentation/userspace-api/media/v4l/metafmt-rkisp1.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GPL-2.0 +.. c:namespace:: V4L .. _v4l2-meta-fmt-rk-isp1-stat-3a: diff --git a/Documentation/userspace-api/media/v4l/metafmt-uvc.rst b/Documentation/userspace-api/media/v4l/metafmt-uvc.rst index 4c05e9e54683a2..c4ae2f13e7f79b 100644 --- a/Documentation/userspace-api/media/v4l/metafmt-uvc.rst +++ b/Documentation/userspace-api/media/v4l/metafmt-uvc.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _v4l2-meta-fmt-uvc: diff --git a/Documentation/userspace-api/media/v4l/metafmt-vivid.rst b/Documentation/userspace-api/media/v4l/metafmt-vivid.rst index 7173e2c3e245cb..94f28736dc800c 100644 --- a/Documentation/userspace-api/media/v4l/metafmt-vivid.rst +++ b/Documentation/userspace-api/media/v4l/metafmt-vivid.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _v4l2-meta-fmt-vivid: diff --git a/Documentation/userspace-api/media/v4l/metafmt-vsp1-hgo.rst b/Documentation/userspace-api/media/v4l/metafmt-vsp1-hgo.rst index 8d886feb180ca6..70357899a5f00a 100644 --- a/Documentation/userspace-api/media/v4l/metafmt-vsp1-hgo.rst +++ b/Documentation/userspace-api/media/v4l/metafmt-vsp1-hgo.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _v4l2-meta-fmt-vsp1-hgo: diff --git a/Documentation/userspace-api/media/v4l/metafmt-vsp1-hgt.rst b/Documentation/userspace-api/media/v4l/metafmt-vsp1-hgt.rst index d8830ff605de4a..4a1575a9e72835 100644 --- a/Documentation/userspace-api/media/v4l/metafmt-vsp1-hgt.rst +++ b/Documentation/userspace-api/media/v4l/metafmt-vsp1-hgt.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _v4l2-meta-fmt-vsp1-hgt: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-bayer.rst b/Documentation/userspace-api/media/v4l/pixfmt-bayer.rst index b5ca501842b0df..8b4e413177f557 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-bayer.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-bayer.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _pixfmt-bayer: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-cnf4.rst b/Documentation/userspace-api/media/v4l/pixfmt-cnf4.rst index 8f469290c30435..4e3e9c5f438765 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-cnf4.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-cnf4.rst @@ -1,4 +1,5 @@ .. -*- coding: utf-8; mode: rst -*- +.. c:namespace:: V4L .. _V4L2-PIX-FMT-CNF4: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst b/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst index 806ed73ac474ce..c7efb0465db648 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-compressed.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L ****************** Compressed Formats diff --git a/Documentation/userspace-api/media/v4l/pixfmt-indexed.rst b/Documentation/userspace-api/media/v4l/pixfmt-indexed.rst index 5bd4a47c58543a..08d698ebdd64a0 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-indexed.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-indexed.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _pixfmt-indexed: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-intro.rst b/Documentation/userspace-api/media/v4l/pixfmt-intro.rst index 14239ee826bf64..00c1b7b0e90782 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-intro.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-intro.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L ********************** Standard Image Formats diff --git a/Documentation/userspace-api/media/v4l/pixfmt-inzi.rst b/Documentation/userspace-api/media/v4l/pixfmt-inzi.rst index 3115c8f6a84212..0af3a303a7f046 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-inzi.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-inzi.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _V4L2-PIX-FMT-INZI: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-m420.rst b/Documentation/userspace-api/media/v4l/pixfmt-m420.rst index c01a949e7c11de..f44a6c5eaddf2b 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-m420.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-m420.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _V4L2-PIX-FMT-M420: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-packed-hsv.rst b/Documentation/userspace-api/media/v4l/pixfmt-packed-hsv.rst index dd89860f50e02a..d1cab3c632f1e4 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-packed-hsv.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-packed-hsv.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _packed-hsv: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-packed-yuv.rst b/Documentation/userspace-api/media/v4l/pixfmt-packed-yuv.rst index 9f111ed594d275..ae7d88ae1c3d43 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-packed-yuv.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-packed-yuv.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _packed-yuv: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst b/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst index ac52485252d9df..1cf6c59f4bc45f 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-reserved.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _pixfmt-reserved: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst b/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst index 5ed4d62df9096e..cf6760bb610921 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-rgb.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _pixfmt-rgb: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-sdr-cs08.rst b/Documentation/userspace-api/media/v4l/pixfmt-sdr-cs08.rst index bd6ee6111de42b..b2dda90409d95d 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-sdr-cs08.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-sdr-cs08.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _v4l2-sdr-fmt-cs8: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-sdr-cs14le.rst b/Documentation/userspace-api/media/v4l/pixfmt-sdr-cs14le.rst index ea21b288d35720..df8b4b22ebceed 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-sdr-cs14le.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-sdr-cs14le.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _V4L2-SDR-FMT-CS14LE: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-sdr-cu08.rst b/Documentation/userspace-api/media/v4l/pixfmt-sdr-cu08.rst index 45fce09d85fff8..86accef8f9f4b2 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-sdr-cu08.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-sdr-cu08.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _v4l2-sdr-fmt-cu8: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-sdr-cu16le.rst b/Documentation/userspace-api/media/v4l/pixfmt-sdr-cu16le.rst index 7f4242f8da6fa4..13d8c86e9b1d43 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-sdr-cu16le.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-sdr-cu16le.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _V4L2-SDR-FMT-CU16LE: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu16be.rst b/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu16be.rst index a4d4b70ece631c..9c4908d57a25a4 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu16be.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu16be.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _V4L2-SDR-FMT-PCU16BE: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu18be.rst b/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu18be.rst index 3db690bd683ac8..56c3f2aee0a4a8 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu18be.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu18be.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _V4L2-SDR-FMT-PCU18BE: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu20be.rst b/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu20be.rst index 485343cdf150e1..1992ee5dd2bc3a 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu20be.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-sdr-pcu20be.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _V4L2-SDR-FMT-PCU20BE: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-sdr-ru12le.rst b/Documentation/userspace-api/media/v4l/pixfmt-sdr-ru12le.rst index 2ad4706bfc7a26..3b2a94e64bcd1b 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-sdr-ru12le.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-sdr-ru12le.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _V4L2-SDR-FMT-RU12LE: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb10-ipu3.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb10-ipu3.rst index 3322b0600f1dd4..de4720dba48a9f 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb10-ipu3.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb10-ipu3.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _v4l2-pix-fmt-ipu3-sbggr10: .. _v4l2-pix-fmt-ipu3-sgbrg10: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb10.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb10.rst index a66414ab42917f..6b4950ad54e0eb 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb10.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb10.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _V4L2-PIX-FMT-SRGGB10: .. _v4l2-pix-fmt-sbggr10: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb10alaw8.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb10alaw8.rst index a5ae1f099e68b0..42176c437ebe3c 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb10alaw8.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb10alaw8.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _V4L2-PIX-FMT-SBGGR10ALAW8: .. _v4l2-pix-fmt-sgbrg10alaw8: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb10dpcm8.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb10dpcm8.rst index f0544c6f4580f8..dac5801815627d 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb10dpcm8.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb10dpcm8.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _V4L2-PIX-FMT-SBGGR10DPCM8: .. _v4l2-pix-fmt-sgbrg10dpcm8: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb10p.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb10p.rst index fd5feb4155315f..af91f12c24e8aa 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb10p.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb10p.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _V4L2-PIX-FMT-SRGGB10P: .. _v4l2-pix-fmt-sbggr10p: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb12.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb12.rst index 15c34e1e483597..2b3212ef732fe3 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb12.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb12.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _V4L2-PIX-FMT-SRGGB12: .. _v4l2-pix-fmt-sbggr12: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb12p.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb12p.rst index 8c03aedcc00e89..cffb3dfc338a68 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb12p.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb12p.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _V4L2-PIX-FMT-SRGGB12P: .. _v4l2-pix-fmt-sbggr12p: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb14.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb14.rst index 4f5120a6c67873..7a3552c045a33d 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb14.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb14.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _V4L2-PIX-FMT-SRGGB14: .. _v4l2-pix-fmt-sbggr14: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb14p.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb14p.rst index f4f53d7dbdeb25..330197aded11be 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb14p.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb14p.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _V4L2-PIX-FMT-SRGGB14P: .. _v4l2-pix-fmt-sbggr14p: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb16.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb16.rst index 2f2f1ef430d919..dab222f4952233 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb16.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb16.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _V4L2-PIX-FMT-SRGGB16: .. _v4l2-pix-fmt-sbggr16: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb8-pisp-comp.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb8-pisp-comp.rst index 5a82a15559d6d7..7a55a3c7c9f6ba 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb8-pisp-comp.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb8-pisp-comp.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _v4l2-pix-fmt-pisp-comp1-rggb: .. _v4l2-pix-fmt-pisp-comp1-grbg: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-srggb8.rst b/Documentation/userspace-api/media/v4l/pixfmt-srggb8.rst index 02061c5a9778d7..4cb263a6ea269e 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-srggb8.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-srggb8.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _V4L2-PIX-FMT-SRGGB8: .. _v4l2-pix-fmt-sbggr8: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-tch-td08.rst b/Documentation/userspace-api/media/v4l/pixfmt-tch-td08.rst index ec89f43c60ec61..37b03da07cf4d4 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-tch-td08.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-tch-td08.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _V4L2-TCH-FMT-DELTA-TD08: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-tch-td16.rst b/Documentation/userspace-api/media/v4l/pixfmt-tch-td16.rst index 7b59a6424243aa..66d3d704155080 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-tch-td16.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-tch-td16.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _V4L2-TCH-FMT-DELTA-TD16: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-tch-tu08.rst b/Documentation/userspace-api/media/v4l/pixfmt-tch-tu08.rst index 63c5264b86684f..b10bb7bad02565 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-tch-tu08.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-tch-tu08.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _V4L2-TCH-FMT-TU08: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-tch-tu16.rst b/Documentation/userspace-api/media/v4l/pixfmt-tch-tu16.rst index ade618a037a893..889298d010a15d 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-tch-tu16.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-tch-tu16.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _V4L2-TCH-FMT-TU16: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-uv8.rst b/Documentation/userspace-api/media/v4l/pixfmt-uv8.rst index ff1d73ef5dba77..8fa97b57ad7597 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-uv8.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-uv8.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _V4L2-PIX-FMT-UV8: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-v4l2-mplane.rst b/Documentation/userspace-api/media/v4l/pixfmt-v4l2-mplane.rst index ad4da988c3a32f..7069b2a6b0b14b 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-v4l2-mplane.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-v4l2-mplane.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L ****************************** Multi-planar format structures diff --git a/Documentation/userspace-api/media/v4l/pixfmt-v4l2.rst b/Documentation/userspace-api/media/v4l/pixfmt-v4l2.rst index 9c423ffe02f963..995267741a26b1 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-v4l2.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-v4l2.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L ****************************** Single-planar format structure diff --git a/Documentation/userspace-api/media/v4l/pixfmt-y12i.rst b/Documentation/userspace-api/media/v4l/pixfmt-y12i.rst index d9b539381d7406..b4223ce3506c70 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-y12i.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-y12i.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _V4L2-PIX-FMT-Y12I: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-y16i.rst b/Documentation/userspace-api/media/v4l/pixfmt-y16i.rst index 74ba9e910a38f7..51f216f24e4117 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-y16i.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-y16i.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _V4L2-PIX-FMT-Y16I: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-y8i.rst b/Documentation/userspace-api/media/v4l/pixfmt-y8i.rst index 770ed4749c146d..c5a3648d37e5a4 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-y8i.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-y8i.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _V4L2-PIX-FMT-Y8I: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst index 74df19be91f69d..99bcc6d385b71a 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv-luma.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _yuv-luma-only: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst index 6e4f399f1f8810..0631919bd667b1 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-yuv-planar.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. planar-yuv: diff --git a/Documentation/userspace-api/media/v4l/pixfmt-z16.rst b/Documentation/userspace-api/media/v4l/pixfmt-z16.rst index 54a8cd723d1a3b..3ab8844d2e6f0a 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt-z16.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt-z16.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _V4L2-PIX-FMT-Z16: diff --git a/Documentation/userspace-api/media/v4l/pixfmt.rst b/Documentation/userspace-api/media/v4l/pixfmt.rst index 11dab4a906303b..71b29267488f96 100644 --- a/Documentation/userspace-api/media/v4l/pixfmt.rst +++ b/Documentation/userspace-api/media/v4l/pixfmt.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _pixfmt: diff --git a/Documentation/userspace-api/media/v4l/planar-apis.rst b/Documentation/userspace-api/media/v4l/planar-apis.rst index 9207ce4283dfc6..075754f0e42333 100644 --- a/Documentation/userspace-api/media/v4l/planar-apis.rst +++ b/Documentation/userspace-api/media/v4l/planar-apis.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _planar-apis: diff --git a/Documentation/userspace-api/media/v4l/querycap.rst b/Documentation/userspace-api/media/v4l/querycap.rst index 15a90271af458c..c96f7654c870b9 100644 --- a/Documentation/userspace-api/media/v4l/querycap.rst +++ b/Documentation/userspace-api/media/v4l/querycap.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _querycap: diff --git a/Documentation/userspace-api/media/v4l/sdr-formats.rst b/Documentation/userspace-api/media/v4l/sdr-formats.rst index d8bdfdb569113e..df76b7d2aaf2f8 100644 --- a/Documentation/userspace-api/media/v4l/sdr-formats.rst +++ b/Documentation/userspace-api/media/v4l/sdr-formats.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _sdr-formats: diff --git a/Documentation/userspace-api/media/v4l/selection-api-configuration.rst b/Documentation/userspace-api/media/v4l/selection-api-configuration.rst index fee49bf1a1c0b7..978c401f4252fc 100644 --- a/Documentation/userspace-api/media/v4l/selection-api-configuration.rst +++ b/Documentation/userspace-api/media/v4l/selection-api-configuration.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L ************* Configuration diff --git a/Documentation/userspace-api/media/v4l/selection-api-examples.rst b/Documentation/userspace-api/media/v4l/selection-api-examples.rst index 5f8e8a1f59d702..3cf7c067f20f49 100644 --- a/Documentation/userspace-api/media/v4l/selection-api-examples.rst +++ b/Documentation/userspace-api/media/v4l/selection-api-examples.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L ******** Examples diff --git a/Documentation/userspace-api/media/v4l/selection-api-intro.rst b/Documentation/userspace-api/media/v4l/selection-api-intro.rst index 6534854ae9f703..817e660ce01681 100644 --- a/Documentation/userspace-api/media/v4l/selection-api-intro.rst +++ b/Documentation/userspace-api/media/v4l/selection-api-intro.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L ************ Introduction diff --git a/Documentation/userspace-api/media/v4l/selection-api-targets.rst b/Documentation/userspace-api/media/v4l/selection-api-targets.rst index 50fdadd5b30749..e1aaaa3a712306 100644 --- a/Documentation/userspace-api/media/v4l/selection-api-targets.rst +++ b/Documentation/userspace-api/media/v4l/selection-api-targets.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L ***************** Selection targets diff --git a/Documentation/userspace-api/media/v4l/selection-api-vs-crop-api.rst b/Documentation/userspace-api/media/v4l/selection-api-vs-crop-api.rst index f57b9180012c32..0c0d66a0cfe66f 100644 --- a/Documentation/userspace-api/media/v4l/selection-api-vs-crop-api.rst +++ b/Documentation/userspace-api/media/v4l/selection-api-vs-crop-api.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _selection-vs-crop: diff --git a/Documentation/userspace-api/media/v4l/selection-api.rst b/Documentation/userspace-api/media/v4l/selection-api.rst index 0360743746dc2f..1320eb63227255 100644 --- a/Documentation/userspace-api/media/v4l/selection-api.rst +++ b/Documentation/userspace-api/media/v4l/selection-api.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _selection-api: diff --git a/Documentation/userspace-api/media/v4l/selections-common.rst b/Documentation/userspace-api/media/v4l/selections-common.rst index 322b39cf0eba6b..e08da7a9b59905 100644 --- a/Documentation/userspace-api/media/v4l/selections-common.rst +++ b/Documentation/userspace-api/media/v4l/selections-common.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _v4l2-selections-common: diff --git a/Documentation/userspace-api/media/v4l/standard.rst b/Documentation/userspace-api/media/v4l/standard.rst index 1f6678325da9a0..53818e37db5f6d 100644 --- a/Documentation/userspace-api/media/v4l/standard.rst +++ b/Documentation/userspace-api/media/v4l/standard.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _standard: diff --git a/Documentation/userspace-api/media/v4l/subdev-formats.rst b/Documentation/userspace-api/media/v4l/subdev-formats.rst index 2a94371448dc07..cf970750dd4c6a 100644 --- a/Documentation/userspace-api/media/v4l/subdev-formats.rst +++ b/Documentation/userspace-api/media/v4l/subdev-formats.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _v4l2-mbus-format: @@ -2224,6 +2225,174 @@ The following table list existing packed 48bit wide RGB formats. \endgroup +The following table list existing packed 60bit wide RGB formats. + +.. tabularcolumns:: |p{4.0cm}|p{0.7cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}| + +.. _v4l2-mbus-pixelcode-rgb-60: + +.. raw:: latex + + \begingroup + \tiny + \setlength{\tabcolsep}{2pt} + +.. flat-table:: 60bit RGB formats + :header-rows: 3 + :stub-columns: 0 + :widths: 36 7 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 + + * - Identifier + - Code + - + - :cspan:`31` Data organization + * - + - + - Bit + - + - + - + - + - 59 + - 58 + - 57 + - 56 + - 55 + - 54 + - 53 + - 52 + - 51 + - 50 + - 49 + - 48 + - 47 + - 46 + - 45 + - 44 + - 43 + - 42 + - 41 + - 40 + - 39 + - 38 + - 37 + - 36 + - 35 + - 34 + - 33 + - 32 + * - + - + - + - 31 + - 30 + - 29 + - 28 + - 27 + - 26 + - 25 + - 24 + - 23 + - 22 + - 21 + - 20 + - 19 + - 18 + - 17 + - 16 + - 15 + - 14 + - 13 + - 12 + - 11 + - 10 + - 9 + - 8 + - 7 + - 6 + - 5 + - 4 + - 3 + - 2 + - 1 + - 0 + * .. _MEDIA-BUS-FMT-RGB202020-1X60: + + - MEDIA_BUS_FMT_RGB202020_1X60 + - 0x1026 + - + - + - + - + - + - r\ :sub:`19` + - r\ :sub:`18` + - r\ :sub:`17` + - r\ :sub:`16` + - r\ :sub:`15` + - r\ :sub:`14` + - r\ :sub:`13` + - r\ :sub:`12` + - r\ :sub:`11` + - r\ :sub:`10` + - r\ :sub:`9` + - r\ :sub:`8` + - r\ :sub:`7` + - r\ :sub:`6` + - r\ :sub:`5` + - r\ :sub:`4` + - r\ :sub:`3` + - r\ :sub:`2` + - r\ :sub:`1` + - r\ :sub:`0` + - g\ :sub:`19` + - g\ :sub:`18` + - g\ :sub:`17` + - g\ :sub:`16` + - g\ :sub:`15` + - g\ :sub:`14` + - g\ :sub:`13` + - g\ :sub:`12` + * - + - + - + - g\ :sub:`11` + - g\ :sub:`10` + - g\ :sub:`9` + - g\ :sub:`8` + - g\ :sub:`7` + - g\ :sub:`6` + - g\ :sub:`5` + - g\ :sub:`4` + - g\ :sub:`3` + - g\ :sub:`2` + - g\ :sub:`1` + - g\ :sub:`0` + - b\ :sub:`19` + - b\ :sub:`18` + - b\ :sub:`17` + - b\ :sub:`16` + - b\ :sub:`15` + - b\ :sub:`14` + - b\ :sub:`13` + - b\ :sub:`12` + - b\ :sub:`11` + - b\ :sub:`10` + - b\ :sub:`9` + - b\ :sub:`8` + - b\ :sub:`7` + - b\ :sub:`6` + - b\ :sub:`5` + - b\ :sub:`4` + - b\ :sub:`3` + - b\ :sub:`2` + - b\ :sub:`1` + - b\ :sub:`0` + +.. raw:: latex + + \endgroup + On LVDS buses, usually each sample is transferred serialized in seven time slots per pixel clock, on three (18-bit) or four (24-bit) or five (30-bit) differential data pairs at the same time. The remaining bits are used @@ -2648,7 +2817,7 @@ organization is given as an example for the first pixel only. \tiny \setlength{\tabcolsep}{2pt} -.. tabularcolumns:: |p{6.0cm}|p{0.7cm}|p{0.3cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}| +.. tabularcolumns:: |p{6.0cm}|p{0.7cm}|p{0.3cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}|p{0.22cm}| .. _v4l2-mbus-pixelcode-bayer: @@ -2661,10 +2830,14 @@ organization is given as an example for the first pixel only. * - Identifier - Code - - - :cspan:`15` Data organization + - :cspan:`19` Data organization * - - - Bit + - 19 + - 18 + - 17 + - 16 - 15 - 14 - 13 @@ -2694,6 +2867,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - b\ :sub:`7` - b\ :sub:`6` - b\ :sub:`5` @@ -2715,6 +2892,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - g\ :sub:`7` - g\ :sub:`6` - g\ :sub:`5` @@ -2736,6 +2917,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - g\ :sub:`7` - g\ :sub:`6` - g\ :sub:`5` @@ -2757,6 +2942,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - r\ :sub:`7` - r\ :sub:`6` - r\ :sub:`5` @@ -2778,6 +2967,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - b\ :sub:`7` - b\ :sub:`6` - b\ :sub:`5` @@ -2799,6 +2992,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - g\ :sub:`7` - g\ :sub:`6` - g\ :sub:`5` @@ -2820,6 +3017,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - g\ :sub:`7` - g\ :sub:`6` - g\ :sub:`5` @@ -2841,6 +3042,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - r\ :sub:`7` - r\ :sub:`6` - r\ :sub:`5` @@ -2862,6 +3067,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - b\ :sub:`7` - b\ :sub:`6` - b\ :sub:`5` @@ -2883,6 +3092,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - g\ :sub:`7` - g\ :sub:`6` - g\ :sub:`5` @@ -2904,6 +3117,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - g\ :sub:`7` - g\ :sub:`6` - g\ :sub:`5` @@ -2925,6 +3142,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - r\ :sub:`7` - r\ :sub:`6` - r\ :sub:`5` @@ -2946,6 +3167,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - 0 - 0 - 0 @@ -2965,6 +3190,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - b\ :sub:`7` - b\ :sub:`6` - b\ :sub:`5` @@ -2986,6 +3215,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - b\ :sub:`7` - b\ :sub:`6` - b\ :sub:`5` @@ -3005,6 +3238,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - 0 - 0 - 0 @@ -3026,6 +3263,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - b\ :sub:`9` - b\ :sub:`8` - b\ :sub:`7` @@ -3045,6 +3286,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - b\ :sub:`1` - b\ :sub:`0` - 0 @@ -3066,6 +3311,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - b\ :sub:`1` - b\ :sub:`0` - 0 @@ -3085,6 +3334,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - b\ :sub:`9` - b\ :sub:`8` - b\ :sub:`7` @@ -3104,6 +3357,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - b\ :sub:`9` - b\ :sub:`8` - b\ :sub:`7` @@ -3125,6 +3382,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - g\ :sub:`9` - g\ :sub:`8` - g\ :sub:`7` @@ -3146,6 +3407,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - g\ :sub:`9` - g\ :sub:`8` - g\ :sub:`7` @@ -3167,6 +3432,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - r\ :sub:`9` - r\ :sub:`8` - r\ :sub:`7` @@ -3186,6 +3455,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - b\ :sub:`11` - b\ :sub:`10` - b\ :sub:`9` @@ -3207,6 +3480,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - g\ :sub:`11` - g\ :sub:`10` - g\ :sub:`9` @@ -3228,6 +3505,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - g\ :sub:`11` - g\ :sub:`10` - g\ :sub:`9` @@ -3249,6 +3530,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - r\ :sub:`11` - r\ :sub:`10` - r\ :sub:`9` @@ -3268,6 +3553,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - b\ :sub:`13` - b\ :sub:`12` - b\ :sub:`11` @@ -3289,6 +3578,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - g\ :sub:`13` - g\ :sub:`12` - g\ :sub:`11` @@ -3310,6 +3603,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - g\ :sub:`13` - g\ :sub:`12` - g\ :sub:`11` @@ -3331,6 +3628,10 @@ organization is given as an example for the first pixel only. - - - + - + - + - + - - r\ :sub:`13` - r\ :sub:`12` - r\ :sub:`11` @@ -3350,6 +3651,10 @@ organization is given as an example for the first pixel only. - MEDIA_BUS_FMT_SBGGR16_1X16 - 0x301d - + - + - + - + - - b\ :sub:`15` - b\ :sub:`14` - b\ :sub:`13` @@ -3371,6 +3676,10 @@ organization is given as an example for the first pixel only. - MEDIA_BUS_FMT_SGBRG16_1X16 - 0x301e - + - + - + - + - - g\ :sub:`15` - g\ :sub:`14` - g\ :sub:`13` @@ -3392,6 +3701,10 @@ organization is given as an example for the first pixel only. - MEDIA_BUS_FMT_SGRBG16_1X16 - 0x301f - + - + - + - + - - g\ :sub:`15` - g\ :sub:`14` - g\ :sub:`13` @@ -3413,6 +3726,110 @@ organization is given as an example for the first pixel only. - MEDIA_BUS_FMT_SRGGB16_1X16 - 0x3020 - + - + - + - + - + - r\ :sub:`15` + - r\ :sub:`14` + - r\ :sub:`13` + - r\ :sub:`12` + - r\ :sub:`11` + - r\ :sub:`10` + - r\ :sub:`9` + - r\ :sub:`8` + - r\ :sub:`7` + - r\ :sub:`6` + - r\ :sub:`5` + - r\ :sub:`4` + - r\ :sub:`3` + - r\ :sub:`2` + - r\ :sub:`1` + - r\ :sub:`0` + * .. _MEDIA-BUS-FMT-SBGGR20-1X20: + + - MEDIA_BUS_FMT_SBGGR20_1X20 + - 0x3021 + - + - b\ :sub:`19` + - b\ :sub:`18` + - b\ :sub:`17` + - b\ :sub:`16` + - b\ :sub:`15` + - b\ :sub:`14` + - b\ :sub:`13` + - b\ :sub:`12` + - b\ :sub:`11` + - b\ :sub:`10` + - b\ :sub:`9` + - b\ :sub:`8` + - b\ :sub:`7` + - b\ :sub:`6` + - b\ :sub:`5` + - b\ :sub:`4` + - b\ :sub:`3` + - b\ :sub:`2` + - b\ :sub:`1` + - b\ :sub:`0` + * .. _MEDIA-BUS-FMT-SGBRG20-1X20: + + - MEDIA_BUS_FMT_SGBRG20_1X20 + - 0x3022 + - + - g\ :sub:`19` + - g\ :sub:`18` + - g\ :sub:`17` + - g\ :sub:`16` + - g\ :sub:`15` + - g\ :sub:`14` + - g\ :sub:`13` + - g\ :sub:`12` + - g\ :sub:`11` + - g\ :sub:`10` + - g\ :sub:`9` + - g\ :sub:`8` + - g\ :sub:`7` + - g\ :sub:`6` + - g\ :sub:`5` + - g\ :sub:`4` + - g\ :sub:`3` + - g\ :sub:`2` + - g\ :sub:`1` + - g\ :sub:`0` + * .. _MEDIA-BUS-FMT-SGRBG20-1X20: + + - MEDIA_BUS_FMT_SGRBG20_1X20 + - 0x3023 + - + - g\ :sub:`19` + - g\ :sub:`18` + - g\ :sub:`17` + - g\ :sub:`16` + - g\ :sub:`15` + - g\ :sub:`14` + - g\ :sub:`13` + - g\ :sub:`12` + - g\ :sub:`11` + - g\ :sub:`10` + - g\ :sub:`9` + - g\ :sub:`8` + - g\ :sub:`7` + - g\ :sub:`6` + - g\ :sub:`5` + - g\ :sub:`4` + - g\ :sub:`3` + - g\ :sub:`2` + - g\ :sub:`1` + - g\ :sub:`0` + * .. _MEDIA-BUS-FMT-SRGGB20-1X20: + + - MEDIA_BUS_FMT_SRGGB20_1X20 + - 0x3024 + - + - r\ :sub:`19` + - r\ :sub:`18` + - r\ :sub:`17` + - r\ :sub:`16` - r\ :sub:`15` - r\ :sub:`14` - r\ :sub:`13` diff --git a/Documentation/userspace-api/media/v4l/tch-formats.rst b/Documentation/userspace-api/media/v4l/tch-formats.rst index 8c941ff9e20000..a382d1c20eb307 100644 --- a/Documentation/userspace-api/media/v4l/tch-formats.rst +++ b/Documentation/userspace-api/media/v4l/tch-formats.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _tch-formats: diff --git a/Documentation/userspace-api/media/v4l/tuner.rst b/Documentation/userspace-api/media/v4l/tuner.rst index e2c53c3abdc690..c82f68d2f90080 100644 --- a/Documentation/userspace-api/media/v4l/tuner.rst +++ b/Documentation/userspace-api/media/v4l/tuner.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _tuner: diff --git a/Documentation/userspace-api/media/v4l/user-func.rst b/Documentation/userspace-api/media/v4l/user-func.rst index 6f661138801cde..5fc95c79240843 100644 --- a/Documentation/userspace-api/media/v4l/user-func.rst +++ b/Documentation/userspace-api/media/v4l/user-func.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _user-func: diff --git a/Documentation/userspace-api/media/v4l/v4l2-isp.rst b/Documentation/userspace-api/media/v4l/v4l2-isp.rst new file mode 100644 index 00000000000000..facf6dba1ca7fc --- /dev/null +++ b/Documentation/userspace-api/media/v4l/v4l2-isp.rst @@ -0,0 +1,67 @@ +.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later + +.. _v4l2-isp: + +************************ +Generic V4L2 ISP formats +************************ + +Generic ISP formats are metadata formats that define a mechanism to pass ISP +parameters and statistics between userspace and drivers in V4L2 buffers. They +are designed to allow extending them in a backward-compatible way. + +ISP parameters +============== + +The generic ISP configuration parameters format is realized by a defining a +single C structure that contains a header, followed by a binary buffer where +userspace programs a variable number of ISP configuration data block, one for +each supported ISP feature. + +The :c:type:`v4l2_isp_params_buffer` structure defines the buffer header which +is followed by a binary buffer of ISP configuration data. Userspace shall +correctly populate the buffer header with the generic parameters format version +and with the size (in bytes) of the binary data buffer where it will store the +ISP blocks configuration. + +Each *ISP configuration block* is preceded by an header implemented by the +:c:type:`v4l2_isp_params_block_header` structure, followed by the configuration +parameters for that specific block, defined by the ISP driver specific data +types. + +Userspace applications are responsible for correctly populating each block's +header fields (type, flags and size) and the block-specific parameters. + +ISP block enabling, disabling and configuration +----------------------------------------------- + +When userspace wants to configure and enable an ISP block it shall fully +populate the block configuration and set the V4L2_ISP_PARAMS_FL_BLOCK_ENABLE +bit in the block header's `flags` field. + +When userspace simply wants to disable an ISP block the +V4L2_ISP_PARAMS_FL_BLOCK_DISABLE bit should be set in block header's `flags` +field. Drivers accept a configuration parameters block with no additional +data after the header in this case. + +If the configuration of an already active ISP block has to be updated, +userspace shall fully populate the ISP block parameters and omit setting the +V4L2_ISP_PARAMS_FL_BLOCK_ENABLE and V4L2_ISP_PARAMS_FL_BLOCK_DISABLE bits in the +header's `flags` field. + +Setting both the V4L2_ISP_PARAMS_FL_BLOCK_ENABLE and +V4L2_ISP_PARAMS_FL_BLOCK_DISABLE bits in the flags field is not allowed and +returns an error. + +Extension to the parameters format can be implemented by adding new blocks +definition without invalidating the existing ones. + +ISP statistics +============== + +Support for generic statistics format is not yet implemented in Video4Linux2. + +V4L2 ISP uAPI data types +======================== + +.. kernel-doc:: include/uapi/linux/media/v4l2-isp.h diff --git a/Documentation/userspace-api/media/v4l/v4l2-selection-flags.rst b/Documentation/userspace-api/media/v4l/v4l2-selection-flags.rst index 1cb1531c1e5208..6aa00b613148d3 100644 --- a/Documentation/userspace-api/media/v4l/v4l2-selection-flags.rst +++ b/Documentation/userspace-api/media/v4l/v4l2-selection-flags.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _v4l2-selection-flags: diff --git a/Documentation/userspace-api/media/v4l/v4l2-selection-targets.rst b/Documentation/userspace-api/media/v4l/v4l2-selection-targets.rst index b46bae984f352a..e9fd4b4bad423c 100644 --- a/Documentation/userspace-api/media/v4l/v4l2-selection-targets.rst +++ b/Documentation/userspace-api/media/v4l/v4l2-selection-targets.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _v4l2-selection-targets: diff --git a/Documentation/userspace-api/media/v4l/v4l2.rst b/Documentation/userspace-api/media/v4l/v4l2.rst index 64fb264fb6c42e..be07b717ebe053 100644 --- a/Documentation/userspace-api/media/v4l/v4l2.rst +++ b/Documentation/userspace-api/media/v4l/v4l2.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. include:: .. _v4l2spec: diff --git a/Documentation/userspace-api/media/v4l/v4l2grab-example.rst b/Documentation/userspace-api/media/v4l/v4l2grab-example.rst index b323be42c58010..b2472d4b0e3fb7 100644 --- a/Documentation/userspace-api/media/v4l/v4l2grab-example.rst +++ b/Documentation/userspace-api/media/v4l/v4l2grab-example.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _v4l2grab-example: diff --git a/Documentation/userspace-api/media/v4l/v4l2grab.c.rst b/Documentation/userspace-api/media/v4l/v4l2grab.c.rst index 1a55e3617ea83b..c958db1e02119d 100644 --- a/Documentation/userspace-api/media/v4l/v4l2grab.c.rst +++ b/Documentation/userspace-api/media/v4l/v4l2grab.c.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L file: media/v4l/v4l2grab.c ========================== diff --git a/Documentation/userspace-api/media/v4l/video.rst b/Documentation/userspace-api/media/v4l/video.rst index f8f69a57602cac..25cb854c11016e 100644 --- a/Documentation/userspace-api/media/v4l/video.rst +++ b/Documentation/userspace-api/media/v4l/video.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _video: diff --git a/Documentation/userspace-api/media/v4l/videodev.rst b/Documentation/userspace-api/media/v4l/videodev.rst index cde485bc9a5fbd..0b71a60928fbcb 100644 --- a/Documentation/userspace-api/media/v4l/videodev.rst +++ b/Documentation/userspace-api/media/v4l/videodev.rst @@ -1,11 +1,14 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _videodev: -******************************* -Video For Linux Two Header File -******************************* +*************************************** +Video For Linux Two Header uAPI Symbols +*************************************** .. kernel-include:: include/uapi/linux/videodev2.h :generate-cross-refs: :exception-file: videodev2.h.rst.exceptions + :toc: + :warn-broken: diff --git a/Documentation/userspace-api/media/v4l/videodev2.h.rst.exceptions b/Documentation/userspace-api/media/v4l/videodev2.h.rst.exceptions index 35d3456cc812a8..c41693115db640 100644 --- a/Documentation/userspace-api/media/v4l/videodev2.h.rst.exceptions +++ b/Documentation/userspace-api/media/v4l/videodev2.h.rst.exceptions @@ -1,5 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 +# All symbols are mapped inside V4L C domain namespace +namespace V4L + # Ignore header name ignore define _UAPI__LINUX_VIDEODEV2_H @@ -15,157 +18,158 @@ ignore define _UAPI__LINUX_VIDEODEV2_H ignore symbol V4L2_BUF_TYPE_PRIVATE ignore symbol V4L2_TUNER_DIGITAL_TV ignore symbol V4L2_COLORSPACE_BT878 +ignore struct __kernel_v4l2_timeval # Documented enum v4l2_field -replace symbol V4L2_FIELD_ALTERNATE :c:type:`v4l2_field` -replace symbol V4L2_FIELD_ANY :c:type:`v4l2_field` -replace symbol V4L2_FIELD_BOTTOM :c:type:`v4l2_field` -replace symbol V4L2_FIELD_INTERLACED :c:type:`v4l2_field` -replace symbol V4L2_FIELD_INTERLACED_BT :c:type:`v4l2_field` -replace symbol V4L2_FIELD_INTERLACED_TB :c:type:`v4l2_field` -replace symbol V4L2_FIELD_NONE :c:type:`v4l2_field` -replace symbol V4L2_FIELD_SEQ_BT :c:type:`v4l2_field` -replace symbol V4L2_FIELD_SEQ_TB :c:type:`v4l2_field` -replace symbol V4L2_FIELD_TOP :c:type:`v4l2_field` +replace symbol V4L2_FIELD_ALTERNATE :c:type:`V4L.v4l2_field` +replace symbol V4L2_FIELD_ANY :c:type:`V4L.v4l2_field` +replace symbol V4L2_FIELD_BOTTOM :c:type:`V4L.v4l2_field` +replace symbol V4L2_FIELD_INTERLACED :c:type:`V4L.v4l2_field` +replace symbol V4L2_FIELD_INTERLACED_BT :c:type:`V4L.v4l2_field` +replace symbol V4L2_FIELD_INTERLACED_TB :c:type:`V4L.v4l2_field` +replace symbol V4L2_FIELD_NONE :c:type:`V4L.v4l2_field` +replace symbol V4L2_FIELD_SEQ_BT :c:type:`V4L.v4l2_field` +replace symbol V4L2_FIELD_SEQ_TB :c:type:`V4L.v4l2_field` +replace symbol V4L2_FIELD_TOP :c:type:`V4L.v4l2_field` # Documented enum v4l2_buf_type -replace symbol V4L2_BUF_TYPE_META_CAPTURE :c:type:`v4l2_buf_type` -replace symbol V4L2_BUF_TYPE_META_OUTPUT :c:type:`v4l2_buf_type` -replace symbol V4L2_BUF_TYPE_SDR_CAPTURE :c:type:`v4l2_buf_type` -replace symbol V4L2_BUF_TYPE_SDR_OUTPUT :c:type:`v4l2_buf_type` -replace symbol V4L2_BUF_TYPE_SLICED_VBI_CAPTURE :c:type:`v4l2_buf_type` -replace symbol V4L2_BUF_TYPE_SLICED_VBI_OUTPUT :c:type:`v4l2_buf_type` -replace symbol V4L2_BUF_TYPE_VBI_CAPTURE :c:type:`v4l2_buf_type` -replace symbol V4L2_BUF_TYPE_VBI_OUTPUT :c:type:`v4l2_buf_type` -replace symbol V4L2_BUF_TYPE_VIDEO_CAPTURE :c:type:`v4l2_buf_type` -replace symbol V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE :c:type:`v4l2_buf_type` -replace symbol V4L2_BUF_TYPE_VIDEO_OUTPUT :c:type:`v4l2_buf_type` -replace symbol V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE :c:type:`v4l2_buf_type` -replace symbol V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY :c:type:`v4l2_buf_type` -replace symbol V4L2_BUF_TYPE_VIDEO_OVERLAY :c:type:`v4l2_buf_type` +replace symbol V4L2_BUF_TYPE_META_CAPTURE :c:type:`V4L.v4l2_buf_type` +replace symbol V4L2_BUF_TYPE_META_OUTPUT :c:type:`V4L.v4l2_buf_type` +replace symbol V4L2_BUF_TYPE_SDR_CAPTURE :c:type:`V4L.v4l2_buf_type` +replace symbol V4L2_BUF_TYPE_SDR_OUTPUT :c:type:`V4L.v4l2_buf_type` +replace symbol V4L2_BUF_TYPE_SLICED_VBI_CAPTURE :c:type:`V4L.v4l2_buf_type` +replace symbol V4L2_BUF_TYPE_SLICED_VBI_OUTPUT :c:type:`V4L.v4l2_buf_type` +replace symbol V4L2_BUF_TYPE_VBI_CAPTURE :c:type:`V4L.v4l2_buf_type` +replace symbol V4L2_BUF_TYPE_VBI_OUTPUT :c:type:`V4L.v4l2_buf_type` +replace symbol V4L2_BUF_TYPE_VIDEO_CAPTURE :c:type:`V4L.v4l2_buf_type` +replace symbol V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE :c:type:`V4L.v4l2_buf_type` +replace symbol V4L2_BUF_TYPE_VIDEO_OUTPUT :c:type:`V4L.v4l2_buf_type` +replace symbol V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE :c:type:`V4L.v4l2_buf_type` +replace symbol V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY :c:type:`V4L.v4l2_buf_type` +replace symbol V4L2_BUF_TYPE_VIDEO_OVERLAY :c:type:`V4L.v4l2_buf_type` # Documented enum v4l2_tuner_type -replace symbol V4L2_TUNER_ANALOG_TV :c:type:`v4l2_tuner_type` -replace symbol V4L2_TUNER_RADIO :c:type:`v4l2_tuner_type` -replace symbol V4L2_TUNER_RF :c:type:`v4l2_tuner_type` -replace symbol V4L2_TUNER_SDR :c:type:`v4l2_tuner_type` +replace symbol V4L2_TUNER_ANALOG_TV :c:type:`V4L.v4l2_tuner_type` +replace symbol V4L2_TUNER_RADIO :c:type:`V4L.v4l2_tuner_type` +replace symbol V4L2_TUNER_RF :c:type:`V4L.v4l2_tuner_type` +replace symbol V4L2_TUNER_SDR :c:type:`V4L.v4l2_tuner_type` # Documented enum v4l2_memory -replace symbol V4L2_MEMORY_DMABUF :c:type:`v4l2_memory` -replace symbol V4L2_MEMORY_MMAP :c:type:`v4l2_memory` -replace symbol V4L2_MEMORY_OVERLAY :c:type:`v4l2_memory` -replace symbol V4L2_MEMORY_USERPTR :c:type:`v4l2_memory` +replace symbol V4L2_MEMORY_DMABUF :c:type:`V4L.v4l2_memory` +replace symbol V4L2_MEMORY_MMAP :c:type:`V4L.v4l2_memory` +replace symbol V4L2_MEMORY_OVERLAY :c:type:`V4L.v4l2_memory` +replace symbol V4L2_MEMORY_USERPTR :c:type:`V4L.v4l2_memory` # Documented enum v4l2_colorspace -replace symbol V4L2_COLORSPACE_470_SYSTEM_BG :c:type:`v4l2_colorspace` -replace symbol V4L2_COLORSPACE_470_SYSTEM_M :c:type:`v4l2_colorspace` -replace symbol V4L2_COLORSPACE_OPRGB :c:type:`v4l2_colorspace` -replace define V4L2_COLORSPACE_ADOBERGB :c:type:`v4l2_colorspace` -replace symbol V4L2_COLORSPACE_BT2020 :c:type:`v4l2_colorspace` -replace symbol V4L2_COLORSPACE_DCI_P3 :c:type:`v4l2_colorspace` -replace symbol V4L2_COLORSPACE_DEFAULT :c:type:`v4l2_colorspace` -replace symbol V4L2_COLORSPACE_JPEG :c:type:`v4l2_colorspace` -replace symbol V4L2_COLORSPACE_RAW :c:type:`v4l2_colorspace` -replace symbol V4L2_COLORSPACE_REC709 :c:type:`v4l2_colorspace` -replace symbol V4L2_COLORSPACE_SMPTE170M :c:type:`v4l2_colorspace` -replace symbol V4L2_COLORSPACE_SMPTE240M :c:type:`v4l2_colorspace` -replace symbol V4L2_COLORSPACE_SRGB :c:type:`v4l2_colorspace` -replace symbol V4L2_COLORSPACE_LAST :c:type:`v4l2_colorspace` +replace symbol V4L2_COLORSPACE_470_SYSTEM_BG :c:type:`V4L.v4l2_colorspace` +replace symbol V4L2_COLORSPACE_470_SYSTEM_M :c:type:`V4L.v4l2_colorspace` +replace symbol V4L2_COLORSPACE_OPRGB :c:type:`V4L.v4l2_colorspace` +replace define V4L2_COLORSPACE_ADOBERGB :c:type:`V4L.v4l2_colorspace` +replace symbol V4L2_COLORSPACE_BT2020 :c:type:`V4L.v4l2_colorspace` +replace symbol V4L2_COLORSPACE_DCI_P3 :c:type:`V4L.v4l2_colorspace` +replace symbol V4L2_COLORSPACE_DEFAULT :c:type:`V4L.v4l2_colorspace` +replace symbol V4L2_COLORSPACE_JPEG :c:type:`V4L.v4l2_colorspace` +replace symbol V4L2_COLORSPACE_RAW :c:type:`V4L.v4l2_colorspace` +replace symbol V4L2_COLORSPACE_REC709 :c:type:`V4L.v4l2_colorspace` +replace symbol V4L2_COLORSPACE_SMPTE170M :c:type:`V4L.v4l2_colorspace` +replace symbol V4L2_COLORSPACE_SMPTE240M :c:type:`V4L.v4l2_colorspace` +replace symbol V4L2_COLORSPACE_SRGB :c:type:`V4L.v4l2_colorspace` +replace symbol V4L2_COLORSPACE_LAST :c:type:`V4L.v4l2_colorspace` # Documented enum v4l2_xfer_func -replace symbol V4L2_XFER_FUNC_709 :c:type:`v4l2_xfer_func` -replace symbol V4L2_XFER_FUNC_OPRGB :c:type:`v4l2_xfer_func` -replace define V4L2_XFER_FUNC_ADOBERGB :c:type:`v4l2_xfer_func` -replace symbol V4L2_XFER_FUNC_DCI_P3 :c:type:`v4l2_xfer_func` -replace symbol V4L2_XFER_FUNC_DEFAULT :c:type:`v4l2_xfer_func` -replace symbol V4L2_XFER_FUNC_NONE :c:type:`v4l2_xfer_func` -replace symbol V4L2_XFER_FUNC_SMPTE2084 :c:type:`v4l2_xfer_func` -replace symbol V4L2_XFER_FUNC_SMPTE240M :c:type:`v4l2_xfer_func` -replace symbol V4L2_XFER_FUNC_SRGB :c:type:`v4l2_xfer_func` -replace symbol V4L2_XFER_FUNC_LAST :c:type:`v4l2_xfer_func` +replace symbol V4L2_XFER_FUNC_709 :c:type:`V4L.v4l2_xfer_func` +replace symbol V4L2_XFER_FUNC_OPRGB :c:type:`V4L.v4l2_xfer_func` +replace define V4L2_XFER_FUNC_ADOBERGB :c:type:`V4L.v4l2_xfer_func` +replace symbol V4L2_XFER_FUNC_DCI_P3 :c:type:`V4L.v4l2_xfer_func` +replace symbol V4L2_XFER_FUNC_DEFAULT :c:type:`V4L.v4l2_xfer_func` +replace symbol V4L2_XFER_FUNC_NONE :c:type:`V4L.v4l2_xfer_func` +replace symbol V4L2_XFER_FUNC_SMPTE2084 :c:type:`V4L.v4l2_xfer_func` +replace symbol V4L2_XFER_FUNC_SMPTE240M :c:type:`V4L.v4l2_xfer_func` +replace symbol V4L2_XFER_FUNC_SRGB :c:type:`V4L.v4l2_xfer_func` +replace symbol V4L2_XFER_FUNC_LAST :c:type:`V4L.v4l2_xfer_func` # Documented enum v4l2_ycbcr_encoding -replace symbol V4L2_YCBCR_ENC_601 :c:type:`v4l2_ycbcr_encoding` -replace symbol V4L2_YCBCR_ENC_709 :c:type:`v4l2_ycbcr_encoding` -replace symbol V4L2_YCBCR_ENC_BT2020 :c:type:`v4l2_ycbcr_encoding` -replace symbol V4L2_YCBCR_ENC_BT2020_CONST_LUM :c:type:`v4l2_ycbcr_encoding` -replace symbol V4L2_YCBCR_ENC_DEFAULT :c:type:`v4l2_ycbcr_encoding` -replace symbol V4L2_YCBCR_ENC_SYCC :c:type:`v4l2_ycbcr_encoding` -replace symbol V4L2_YCBCR_ENC_XV601 :c:type:`v4l2_ycbcr_encoding` -replace symbol V4L2_YCBCR_ENC_XV709 :c:type:`v4l2_ycbcr_encoding` -replace symbol V4L2_YCBCR_ENC_SMPTE240M :c:type:`v4l2_ycbcr_encoding` -replace symbol V4L2_YCBCR_ENC_LAST :c:type:`v4l2_ycbcr_encoding` +replace symbol V4L2_YCBCR_ENC_601 :c:type:`V4L.v4l2_ycbcr_encoding` +replace symbol V4L2_YCBCR_ENC_709 :c:type:`V4L.v4l2_ycbcr_encoding` +replace symbol V4L2_YCBCR_ENC_BT2020 :c:type:`V4L.v4l2_ycbcr_encoding` +replace symbol V4L2_YCBCR_ENC_BT2020_CONST_LUM :c:type:`V4L.v4l2_ycbcr_encoding` +replace symbol V4L2_YCBCR_ENC_DEFAULT :c:type:`V4L.v4l2_ycbcr_encoding` +replace symbol V4L2_YCBCR_ENC_SYCC :c:type:`V4L.v4l2_ycbcr_encoding` +replace symbol V4L2_YCBCR_ENC_XV601 :c:type:`V4L.v4l2_ycbcr_encoding` +replace symbol V4L2_YCBCR_ENC_XV709 :c:type:`V4L.v4l2_ycbcr_encoding` +replace symbol V4L2_YCBCR_ENC_SMPTE240M :c:type:`V4L.v4l2_ycbcr_encoding` +replace symbol V4L2_YCBCR_ENC_LAST :c:type:`V4L.v4l2_ycbcr_encoding` # Documented enum v4l2_hsv_encoding -replace symbol V4L2_HSV_ENC_180 :c:type:`v4l2_hsv_encoding` -replace symbol V4L2_HSV_ENC_256 :c:type:`v4l2_hsv_encoding` +replace symbol V4L2_HSV_ENC_180 :c:type:`V4L.v4l2_hsv_encoding` +replace symbol V4L2_HSV_ENC_256 :c:type:`V4L.v4l2_hsv_encoding` # Documented enum v4l2_quantization -replace symbol V4L2_QUANTIZATION_DEFAULT :c:type:`v4l2_quantization` -replace symbol V4L2_QUANTIZATION_FULL_RANGE :c:type:`v4l2_quantization` -replace symbol V4L2_QUANTIZATION_LIM_RANGE :c:type:`v4l2_quantization` +replace symbol V4L2_QUANTIZATION_DEFAULT :c:type:`V4L.v4l2_quantization` +replace symbol V4L2_QUANTIZATION_FULL_RANGE :c:type:`V4L.v4l2_quantization` +replace symbol V4L2_QUANTIZATION_LIM_RANGE :c:type:`V4L.v4l2_quantization` # Documented enum v4l2_priority -replace symbol V4L2_PRIORITY_BACKGROUND :c:type:`v4l2_priority` -replace symbol V4L2_PRIORITY_DEFAULT :c:type:`v4l2_priority` -replace symbol V4L2_PRIORITY_INTERACTIVE :c:type:`v4l2_priority` -replace symbol V4L2_PRIORITY_RECORD :c:type:`v4l2_priority` -replace symbol V4L2_PRIORITY_UNSET :c:type:`v4l2_priority` +replace symbol V4L2_PRIORITY_BACKGROUND :c:type:`V4L.v4l2_priority` +replace symbol V4L2_PRIORITY_DEFAULT :c:type:`V4L.v4l2_priority` +replace symbol V4L2_PRIORITY_INTERACTIVE :c:type:`V4L.v4l2_priority` +replace symbol V4L2_PRIORITY_RECORD :c:type:`V4L.v4l2_priority` +replace symbol V4L2_PRIORITY_UNSET :c:type:`V4L.v4l2_priority` # Documented enum v4l2_frmsizetypes -replace symbol V4L2_FRMSIZE_TYPE_CONTINUOUS :c:type:`v4l2_frmsizetypes` -replace symbol V4L2_FRMSIZE_TYPE_DISCRETE :c:type:`v4l2_frmsizetypes` -replace symbol V4L2_FRMSIZE_TYPE_STEPWISE :c:type:`v4l2_frmsizetypes` +replace symbol V4L2_FRMSIZE_TYPE_CONTINUOUS :c:type:`V4L.v4l2_frmsizetypes` +replace symbol V4L2_FRMSIZE_TYPE_DISCRETE :c:type:`V4L.v4l2_frmsizetypes` +replace symbol V4L2_FRMSIZE_TYPE_STEPWISE :c:type:`V4L.v4l2_frmsizetypes` # Documented enum frmivaltypes -replace symbol V4L2_FRMIVAL_TYPE_CONTINUOUS :c:type:`v4l2_frmivaltypes` -replace symbol V4L2_FRMIVAL_TYPE_DISCRETE :c:type:`v4l2_frmivaltypes` -replace symbol V4L2_FRMIVAL_TYPE_STEPWISE :c:type:`v4l2_frmivaltypes` +replace symbol V4L2_FRMIVAL_TYPE_CONTINUOUS :c:type:`V4L.v4l2_frmivaltypes` +replace symbol V4L2_FRMIVAL_TYPE_DISCRETE :c:type:`V4L.v4l2_frmivaltypes` +replace symbol V4L2_FRMIVAL_TYPE_STEPWISE :c:type:`V4L.v4l2_frmivaltypes` -# Documented enum :c:type:`v4l2_ctrl_type` +# Documented enum :c:type:`V4L.v4l2_ctrl_type` replace symbol V4L2_CTRL_COMPOUND_TYPES vidioc_queryctrl -replace symbol V4L2_CTRL_TYPE_BITMASK :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_BOOLEAN :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_BUTTON :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_CTRL_CLASS :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_INTEGER :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_INTEGER64 :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_INTEGER_MENU :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_MENU :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_STRING :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_U16 :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_U32 :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_U8 :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_MPEG2_SEQUENCE :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_MPEG2_PICTURE :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_MPEG2_QUANTISATION :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_H264_SPS :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_H264_PPS :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_H264_SCALING_MATRIX :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_H264_PRED_WEIGHTS :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_H264_SLICE_PARAMS :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_H264_DECODE_PARAMS :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_HEVC_SPS :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_HEVC_PPS :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_AREA :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_RECT :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_FWHT_PARAMS :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_VP8_FRAME :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_VP9_COMPRESSED_HDR :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_VP9_FRAME :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_HDR10_CLL_INFO :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_HDR10_MASTERING_DISPLAY :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_HEVC_SPS :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_HEVC_PPS :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_HEVC_SCALING_MATRIX :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_HEVC_DECODE_PARAMS :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_AV1_SEQUENCE :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_AV1_TILE_GROUP_ENTRY :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_AV1_FRAME :c:type:`v4l2_ctrl_type` -replace symbol V4L2_CTRL_TYPE_AV1_FILM_GRAIN :c:type:`v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_BITMASK :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_BOOLEAN :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_BUTTON :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_CTRL_CLASS :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_INTEGER :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_INTEGER64 :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_INTEGER_MENU :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_MENU :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_STRING :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_U16 :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_U32 :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_U8 :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_MPEG2_SEQUENCE :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_MPEG2_PICTURE :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_MPEG2_QUANTISATION :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_H264_SPS :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_H264_PPS :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_H264_SCALING_MATRIX :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_H264_PRED_WEIGHTS :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_H264_SLICE_PARAMS :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_H264_DECODE_PARAMS :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_HEVC_SPS :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_HEVC_PPS :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_AREA :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_RECT :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_FWHT_PARAMS :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_VP8_FRAME :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_VP9_COMPRESSED_HDR :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_VP9_FRAME :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_HDR10_CLL_INFO :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_HDR10_MASTERING_DISPLAY :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_HEVC_SPS :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_HEVC_PPS :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_HEVC_SCALING_MATRIX :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_HEVC_DECODE_PARAMS :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_AV1_SEQUENCE :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_AV1_TILE_GROUP_ENTRY :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_AV1_FRAME :c:type:`V4L.v4l2_ctrl_type` +replace symbol V4L2_CTRL_TYPE_AV1_FILM_GRAIN :c:type:`V4L.v4l2_ctrl_type` # V4L2 capability defines replace define V4L2_CAP_VIDEO_CAPTURE device-capabilities @@ -201,10 +205,10 @@ replace define V4L2_CAP_IO_MC device-capabilities replace define V4L2_CAP_EDID device-capabilities # V4L2 pix flags -replace define V4L2_PIX_FMT_PRIV_MAGIC :c:type:`v4l2_pix_format` +replace define V4L2_PIX_FMT_PRIV_MAGIC :c:type:`V4L.v4l2_pix_format` replace define V4L2_PIX_FMT_FLAG_PREMUL_ALPHA format-flags -replace define V4L2_PIX_FMT_HM12 :c:type:`v4l2_pix_format` -replace define V4L2_PIX_FMT_SUNXI_TILED_NV12 :c:type:`v4l2_pix_format` +replace define V4L2_PIX_FMT_HM12 :c:type:`V4L.v4l2_pix_format` +replace define V4L2_PIX_FMT_SUNXI_TILED_NV12 :c:type:`V4L.v4l2_pix_format` # V4L2 format flags replace define V4L2_FMT_FLAG_COMPRESSED fmtdesc-flags @@ -263,7 +267,7 @@ replace define V4L2_FBUF_FLAG_SRC_CHROMAKEY framebuffer-flags # Used on VIDIOC_G_PARM replace define V4L2_MODE_HIGHQUALITY parm-flags -replace define V4L2_CAP_TIMEPERFRAME :c:type:`v4l2_captureparm` +replace define V4L2_CAP_TIMEPERFRAME :c:type:`V4L.v4l2_captureparm` # The V4L2_STD_foo are all defined at v4l2_std_id table @@ -316,11 +320,11 @@ replace define V4L2_STD_ALL v4l2-std-id # V4L2 DT BT timings definitions -replace define V4L2_DV_PROGRESSIVE :c:type:`v4l2_bt_timings` -replace define V4L2_DV_INTERLACED :c:type:`v4l2_bt_timings` +replace define V4L2_DV_PROGRESSIVE :c:type:`V4L.v4l2_bt_timings` +replace define V4L2_DV_INTERLACED :c:type:`V4L.v4l2_bt_timings` -replace define V4L2_DV_VSYNC_POS_POL :c:type:`v4l2_bt_timings` -replace define V4L2_DV_HSYNC_POS_POL :c:type:`v4l2_bt_timings` +replace define V4L2_DV_VSYNC_POS_POL :c:type:`V4L.v4l2_bt_timings` +replace define V4L2_DV_HSYNC_POS_POL :c:type:`V4L.v4l2_bt_timings` replace define V4L2_DV_BT_STD_CEA861 dv-bt-standards replace define V4L2_DV_BT_STD_DMT dv-bt-standards @@ -456,11 +460,11 @@ replace define V4L2_AUDMODE_AVL audio-mode # MPEG -replace define V4L2_ENC_IDX_FRAME_I :c:type:`v4l2_enc_idx` -replace define V4L2_ENC_IDX_FRAME_P :c:type:`v4l2_enc_idx` -replace define V4L2_ENC_IDX_FRAME_B :c:type:`v4l2_enc_idx` -replace define V4L2_ENC_IDX_FRAME_MASK :c:type:`v4l2_enc_idx` -replace define V4L2_ENC_IDX_ENTRIES :c:type:`v4l2_enc_idx` +replace define V4L2_ENC_IDX_FRAME_I :c:type:`V4L.v4l2_enc_idx` +replace define V4L2_ENC_IDX_FRAME_P :c:type:`V4L.v4l2_enc_idx` +replace define V4L2_ENC_IDX_FRAME_B :c:type:`V4L.v4l2_enc_idx` +replace define V4L2_ENC_IDX_FRAME_MASK :c:type:`V4L.v4l2_enc_idx` +replace define V4L2_ENC_IDX_ENTRIES :c:type:`V4L.v4l2_enc_idx` replace define V4L2_ENC_CMD_START encoder-cmds replace define V4L2_ENC_CMD_STOP encoder-cmds @@ -488,10 +492,10 @@ replace define V4L2_DEC_START_FMT_GOP decoder-cmds replace define V4L2_VBI_UNSYNC vbifmt-flags replace define V4L2_VBI_INTERLACED vbifmt-flags -replace define V4L2_VBI_ITU_525_F1_START :c:type:`v4l2_vbi_format` -replace define V4L2_VBI_ITU_525_F2_START :c:type:`v4l2_vbi_format` -replace define V4L2_VBI_ITU_625_F1_START :c:type:`v4l2_vbi_format` -replace define V4L2_VBI_ITU_625_F2_START :c:type:`v4l2_vbi_format` +replace define V4L2_VBI_ITU_525_F1_START :c:type:`V4L.v4l2_vbi_format` +replace define V4L2_VBI_ITU_525_F2_START :c:type:`V4L.v4l2_vbi_format` +replace define V4L2_VBI_ITU_625_F1_START :c:type:`V4L.v4l2_vbi_format` +replace define V4L2_VBI_ITU_625_F2_START :c:type:`V4L.v4l2_vbi_format` replace define V4L2_SLICED_TELETEXT_B vbi-services @@ -527,7 +531,7 @@ replace define V4L2_EVENT_CTRL_CH_DIMENSIONS ctrl-changes-flags replace define V4L2_EVENT_SRC_CH_RESOLUTION src-changes-flags -replace define V4L2_EVENT_MD_FL_HAVE_FRAME_SEQ :c:type:`v4l2_event_motion_det` +replace define V4L2_EVENT_MD_FL_HAVE_FRAME_SEQ :c:type:`V4L.v4l2_event_motion_det` replace define V4L2_EVENT_SUB_FL_SEND_INITIAL event-flags replace define V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK event-flags diff --git a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst index 3549417c7febb5..c8baa9430c14d9 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-queryctrl.rst @@ -15,6 +15,8 @@ VIDIOC_QUERYCTRL - VIDIOC_QUERY_EXT_CTRL - VIDIOC_QUERYMENU - Enumerate controls Synopsis ======== +.. c:macro:: VIDIOC_QUERY_CTRL + ``int ioctl(int fd, int VIDIOC_QUERYCTRL, struct v4l2_queryctrl *argp)`` .. c:macro:: VIDIOC_QUERY_EXT_CTRL @@ -98,6 +100,8 @@ See also the examples in :ref:`control`. .. _v4l2-queryctrl: +.. c:struct:: v4l2_queryctrl + .. cssclass:: longtable .. flat-table:: struct v4l2_queryctrl @@ -178,6 +182,8 @@ See also the examples in :ref:`control`. .. cssclass:: longtable +.. c:struct:: v4l2_query_ext_ctrl + .. flat-table:: struct v4l2_query_ext_ctrl :header-rows: 0 :stub-columns: 0 @@ -276,6 +282,8 @@ See also the examples in :ref:`control`. .. _v4l2-querymenu: +.. c:struct:: v4l2_querymenu + .. flat-table:: struct v4l2_querymenu :header-rows: 0 :stub-columns: 0 diff --git a/Documentation/userspace-api/media/v4l/vidioc-remove-bufs.rst b/Documentation/userspace-api/media/v4l/vidioc-remove-bufs.rst index 1995b39af9ba81..b498d60752d757 100644 --- a/Documentation/userspace-api/media/v4l/vidioc-remove-bufs.rst +++ b/Documentation/userspace-api/media/v4l/vidioc-remove-bufs.rst @@ -54,7 +54,7 @@ are invoked. - ``count`` - The number of buffers to be removed with indices 'index' until 'index + count - 1'. All buffers in this range must be valid and in DEQUEUED state. - :ref:`VIDIOC_REMOVE_BUFS` will always check the validity of ``type`, if it is + :ref:`VIDIOC_REMOVE_BUFS` will always check the validity of ``type``, if it is invalid it returns ``EINVAL`` error code. If count is set to 0 :ref:`VIDIOC_REMOVE_BUFS` will do nothing and return 0. * - __u32 diff --git a/Documentation/userspace-api/media/v4l/yuv-formats.rst b/Documentation/userspace-api/media/v4l/yuv-formats.rst index 78ee406d764793..c5ef408470a55a 100644 --- a/Documentation/userspace-api/media/v4l/yuv-formats.rst +++ b/Documentation/userspace-api/media/v4l/yuv-formats.rst @@ -1,4 +1,5 @@ .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later +.. c:namespace:: V4L .. _yuv-formats: diff --git a/Documentation/userspace-api/spec_ctrl.rst b/Documentation/userspace-api/spec_ctrl.rst index 5e8ed9eef9aa84..ca89151fc0a8e7 100644 --- a/Documentation/userspace-api/spec_ctrl.rst +++ b/Documentation/userspace-api/spec_ctrl.rst @@ -26,7 +26,8 @@ PR_GET_SPECULATION_CTRL PR_GET_SPECULATION_CTRL returns the state of the speculation misfeature which is selected with arg2 of prctl(2). The return value uses bits 0-3 with -the following meaning: +the following meaning (with the caveat that PR_SPEC_L1D_FLUSH has less obvious +semantics, see documentation for that specific control below): ==== ====================== ================================================== Bit Define Description @@ -110,6 +111,9 @@ Speculation misfeature controls - PR_SPEC_L1D_FLUSH: Flush L1D Cache on context switch out of the task (works only when tasks run on non SMT cores) +For this control, PR_SPEC_ENABLE means that the **mitigation** is enabled (L1D +is flushed), PR_SPEC_DISABLE means it is disabled. + Invocations: * prctl(PR_GET_SPECULATION_CTRL, PR_SPEC_L1D_FLUSH, 0, 0, 0); * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_L1D_FLUSH, PR_SPEC_ENABLE, 0, 0); diff --git a/Documentation/virt/hyperv/coco.rst b/Documentation/virt/hyperv/coco.rst index c15d6fe34b4e84..3231e51444dace 100644 --- a/Documentation/virt/hyperv/coco.rst +++ b/Documentation/virt/hyperv/coco.rst @@ -178,7 +178,7 @@ These Hyper-V and VMBus memory pages are marked as decrypted: * VMBus monitor pages -* Synthetic interrupt controller (synic) related pages (unless supplied by +* Synthetic interrupt controller (SynIC) related pages (unless supplied by the paravisor) * Per-cpu hypercall input and output pages (unless running with a paravisor) @@ -232,6 +232,143 @@ with arguments explicitly describing the access. See _hv_pcifront_read_config() and _hv_pcifront_write_config() and the "use_calls" flag indicating to use hypercalls. +Confidential VMBus +------------------ +The confidential VMBus enables the confidential guest not to interact with +the untrusted host partition and the untrusted hypervisor. Instead, the guest +relies on the trusted paravisor to communicate with the devices processing +sensitive data. The hardware (SNP or TDX) encrypts the guest memory and the +register state while measuring the paravisor image using the platform security +processor to ensure trusted and confidential computing. + +Confidential VMBus provides a secure communication channel between the guest +and the paravisor, ensuring that sensitive data is protected from hypervisor- +level access through memory encryption and register state isolation. + +Confidential VMBus is an extension of Confidential Computing (CoCo) VMs +(a.k.a. "Isolated" VMs in Hyper-V terminology). Without Confidential VMBus, +guest VMBus device drivers (the "VSC"s in VMBus terminology) communicate +with VMBus servers (the VSPs) running on the Hyper-V host. The +communication must be through memory that has been decrypted so the +host can access it. With Confidential VMBus, one or more of the VSPs reside +in the trusted paravisor layer in the guest VM. Since the paravisor layer also +operates in encrypted memory, the memory used for communication with +such VSPs does not need to be decrypted and thereby exposed to the +Hyper-V host. The paravisor is responsible for communicating securely +with the Hyper-V host as necessary. + +The data is transferred directly between the VM and a vPCI device (a.k.a. +a PCI pass-thru device, see :doc:`vpci`) that is directly assigned to VTL2 +and that supports encrypted memory. In such a case, neither the host partition +nor the hypervisor has any access to the data. The guest needs to establish +a VMBus connection only with the paravisor for the channels that process +sensitive data, and the paravisor abstracts the details of communicating +with the specific devices away providing the guest with the well-established +VSP (Virtual Service Provider) interface that has had support in the Hyper-V +drivers for a decade. + +In the case the device does not support encrypted memory, the paravisor +provides bounce-buffering, and although the data is not encrypted, the backing +pages aren't mapped into the host partition through SLAT. While not impossible, +it becomes much more difficult for the host partition to exfiltrate the data +than it would be with a conventional VMBus connection where the host partition +has direct access to the memory used for communication. + +Here is the data flow for a conventional VMBus connection (`C` stands for the +client or VSC, `S` for the server or VSP, the `DEVICE` is a physical one, might +be with multiple virtual functions):: + + +---- GUEST ----+ +----- DEVICE ----+ +----- HOST -----+ + | | | | | | + | | | | | | + | | | ========== | + | | | | | | + | | | | | | + | | | | | | + +----- C -------+ +-----------------+ +------- S ------+ + || || + || || + +------||------------------ VMBus --------------------------||------+ + | Interrupts, MMIO | + +-------------------------------------------------------------------+ + +and the Confidential VMBus connection:: + + +---- GUEST --------------- VTL0 ------+ +-- DEVICE --+ + | | | | + | +- PARAVISOR --------- VTL2 -----+ | | | + | | +-- VMBus Relay ------+ ====+================ | + | | | Interrupts, MMIO | | | | | + | | +-------- S ----------+ | | +------------+ + | | || | | + | +---------+ || | | + | | Linux | || OpenHCL | | + | | kernel | || | | + | +---- C --+-----||---------------+ | + | || || | + +-------++------- C -------------------+ +------------+ + || | HOST | + || +---- S -----+ + +-------||----------------- VMBus ---------------------------||-----+ + | Interrupts, MMIO | + +-------------------------------------------------------------------+ + +An implementation of the VMBus relay that offers the Confidential VMBus +channels is available in the OpenVMM project as a part of the OpenHCL +paravisor. Please refer to + + * https://openvmm.dev/, and + * https://github.com/microsoft/openvmm + +for more information about the OpenHCL paravisor. + +A guest that is running with a paravisor must determine at runtime if +Confidential VMBus is supported by the current paravisor. The x86_64-specific +approach relies on the CPUID Virtualization Stack leaf; the ARM64 implementation +is expected to support the Confidential VMBus unconditionally when running +ARM CCA guests. + +Confidential VMBus is a characteristic of the VMBus connection as a whole, +and of each VMBus channel that is created. When a Confidential VMBus +connection is established, the paravisor provides the guest the message-passing +path that is used for VMBus device creation and deletion, and it provides a +per-CPU synthetic interrupt controller (SynIC) just like the SynIC that is +offered by the Hyper-V host. Each VMBus device that is offered to the guest +indicates the degree to which it participates in Confidential VMBus. The offer +indicates if the device uses encrypted ring buffers, and if the device uses +encrypted memory for DMA that is done outside the ring buffer. These settings +may be different for different devices using the same Confidential VMBus +connection. + +Although these settings are separate, in practice it'll always be encrypted +ring buffer only, or both encrypted ring buffer and external data. If a channel +is offered by the paravisor with confidential VMBus, the ring buffer can always +be encrypted since it's strictly for communication between the VTL2 paravisor +and the VTL0 guest. However, other memory regions are often used for e.g. DMA, +so they need to be accessible by the underlying hardware, and must be +unencrypted (unless the device supports encrypted memory). Currently, there are +not any VSPs in OpenHCL that support encrypted external memory, but future +versions are expected to enable this capability. + +Because some devices on a Confidential VMBus may require decrypted ring buffers +and DMA transfers, the guest must interact with two SynICs -- the one provided +by the paravisor and the one provided by the Hyper-V host when Confidential +VMBus is not offered. Interrupts are always signaled by the paravisor SynIC, +but the guest must check for messages and for channel interrupts on both SynICs. + +In the case of a confidential VMBus, regular SynIC access by the guest is +intercepted by the paravisor (this includes various MSRs such as the SIMP and +SIEFP, as well as hypercalls like HvPostMessage and HvSignalEvent). If the +guest actually wants to communicate with the hypervisor, it has to use special +mechanisms (GHCB page on SNP, or tdcall on TDX). Messages can be of either +kind: with confidential VMBus, messages use the paravisor SynIC, and if the +guest chose to communicate directly to the hypervisor, they use the hypervisor +SynIC. For interrupt signaling, some channels may be running on the host +(non-confidential, using the VMBus relay) and use the hypervisor SynIC, and +some on the paravisor and use its SynIC. The RelIDs are coordinated by the +OpenHCL VMBus server and are guaranteed to be unique regardless of whether +the channel originated on the host or the paravisor. + load_unaligned_zeropad() ------------------------ When transitioning memory between encrypted and decrypted, the caller of diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst index 57061fa29e6a08..01a3abef8abb91 100644 --- a/Documentation/virt/kvm/api.rst +++ b/Documentation/virt/kvm/api.rst @@ -7286,6 +7286,41 @@ exit, even without calls to ``KVM_ENABLE_CAP`` or similar. In this case, it will enter with output fields already valid; in the common case, the ``unknown.ret`` field of the union will be ``TDVMCALL_STATUS_SUBFUNC_UNSUPPORTED``. Userspace need not do anything if it does not wish to support a TDVMCALL. + +:: + + /* KVM_EXIT_ARM_SEA */ + struct { + #define KVM_EXIT_ARM_SEA_FLAG_GPA_VALID (1ULL << 0) + __u64 flags; + __u64 esr; + __u64 gva; + __u64 gpa; + } arm_sea; + +Used on arm64 systems. When the VM capability ``KVM_CAP_ARM_SEA_TO_USER`` is +enabled, a KVM exits to userspace if a guest access causes a synchronous +external abort (SEA) and the host APEI fails to handle the SEA. + +``esr`` is set to a sanitized value of ESR_EL2 from the exception taken to KVM, +consisting of the following fields: + + - ``ESR_EL2.EC`` + - ``ESR_EL2.IL`` + - ``ESR_EL2.FnV`` + - ``ESR_EL2.EA`` + - ``ESR_EL2.CM`` + - ``ESR_EL2.WNR`` + - ``ESR_EL2.FSC`` + - ``ESR_EL2.SET`` (when FEAT_RAS is implemented for the VM) + +``gva`` is set to the value of FAR_EL2 from the exception taken to KVM when +``ESR_EL2.FnV == 0``. Otherwise, the value of ``gva`` is unknown. + +``gpa`` is set to the faulting IPA from the exception taken to KVM when +the ``KVM_EXIT_ARM_SEA_FLAG_GPA_VALID`` flag is set. Otherwise, the value of +``gpa`` is unknown. + :: /* Fix the size of the union. */ @@ -7820,7 +7855,7 @@ where 0xff represents CPUs 0-7 in cluster 0. :Architectures: s390 :Parameters: none -With this capability enabled, all illegal instructions 0x0000 (2 bytes) will +With this capability enabled, the illegal instruction 0x0000 (2 bytes) will be intercepted and forwarded to user space. User space can use this mechanism e.g. to realize 2-byte software breakpoints. The kernel will not inject an operating exception for these instructions, user space has @@ -8028,7 +8063,7 @@ will be initialized to 1 when created. This also improves performance because dirty logging can be enabled gradually in small chunks on the first call to KVM_CLEAR_DIRTY_LOG. KVM_DIRTY_LOG_INITIALLY_SET depends on KVM_DIRTY_LOG_MANUAL_PROTECT_ENABLE (it is also only available on -x86 and arm64 for now). +x86, arm64 and riscv for now). KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 was previously available under the name KVM_CAP_MANUAL_DIRTY_LOG_PROTECT, but the implementation had bugs that make @@ -8524,7 +8559,7 @@ Therefore, the ioctl must be called *before* reading the content of the dirty pages. The dirty ring can get full. When it happens, the KVM_RUN of the -vcpu will return with exit reason KVM_EXIT_DIRTY_LOG_FULL. +vcpu will return with exit reason KVM_EXIT_DIRTY_RING_FULL. The dirty ring interface has a major difference comparing to the KVM_GET_DIRTY_LOG interface in that, when reading the dirty ring from @@ -8692,7 +8727,7 @@ given VM. When this capability is enabled, KVM resets the VCPU when setting MP_STATE_INIT_RECEIVED through IOCTL. The original MP_STATE is preserved. -7.43 KVM_CAP_ARM_CACHEABLE_PFNMAP_SUPPORTED +7.44 KVM_CAP_ARM_CACHEABLE_PFNMAP_SUPPORTED ------------------------------------------- :Architectures: arm64 @@ -8703,6 +8738,33 @@ This capability indicate to the userspace whether a PFNMAP memory region can be safely mapped as cacheable. This relies on the presence of force write back (FWB) feature support on the hardware. +7.45 KVM_CAP_ARM_SEA_TO_USER +---------------------------- + +:Architecture: arm64 +:Target: VM +:Parameters: none +:Returns: 0 on success, -EINVAL if unsupported. + +When this capability is enabled, KVM may exit to userspace for SEAs taken to +EL2 resulting from a guest access. See ``KVM_EXIT_ARM_SEA`` for more +information. + +7.46 KVM_CAP_S390_USER_OPEREXEC +------------------------------- + +:Architectures: s390 +:Parameters: none + +When this capability is enabled KVM forwards all operation exceptions +that it doesn't handle itself to user space. This also includes the +0x0000 instructions managed by KVM_CAP_S390_USER_INSTR0. This is +helpful if user space wants to emulate instructions which are not +(yet) implemented in hardware. + +This capability can be enabled dynamically even if VCPUs were already +created and are running. + 8. Other capabilities. ====================== diff --git a/Documentation/virt/kvm/x86/errata.rst b/Documentation/virt/kvm/x86/errata.rst index 37c79362a48fa8..a9cf0e004651aa 100644 --- a/Documentation/virt/kvm/x86/errata.rst +++ b/Documentation/virt/kvm/x86/errata.rst @@ -48,7 +48,14 @@ versus "has_error_code", i.e. KVM's ABI follows AMD behavior. Nested virtualization features ------------------------------ -TBD +On AMD CPUs, when GIF is cleared, #DB exceptions or traps due to a breakpoint +register match are ignored and discarded by the CPU. The CPU relies on the VMM +to fully virtualize this behavior, even when vGIF is enabled for the guest +(i.e. vGIF=0 does not cause the CPU to drop #DBs when the guest is running). +KVM does not virtualize this behavior as the complexity is unjustified given +the rarity of the use case. One way to handle this would be for KVM to +intercept the #DB, temporarily disable the breakpoint, single-step over the +instruction, then re-enable the breakpoint. x2APIC ------ diff --git a/Documentation/w1/w1-netlink.rst b/Documentation/w1/w1-netlink.rst index be4f7b82dcb435..ff281713e626e6 100644 --- a/Documentation/w1/w1-netlink.rst +++ b/Documentation/w1/w1-netlink.rst @@ -196,7 +196,7 @@ Additional documentation, source code examples ============================================== 1. Documentation/driver-api/connector.rst -2. http://www.ioremap.net/archive/w1 +2. https://github.com/bioothod/w1 This archive includes userspace application w1d.c which uses read/write/search commands for all master/slave devices found on the bus. diff --git a/Documentation/wmi/devices/lenovo-wmi-gamezone.rst b/Documentation/wmi/devices/lenovo-wmi-gamezone.rst index 997263e51a7dff..1769ad3d57b99c 100644 --- a/Documentation/wmi/devices/lenovo-wmi-gamezone.rst +++ b/Documentation/wmi/devices/lenovo-wmi-gamezone.rst @@ -19,27 +19,26 @@ WMI GUID ``887B54E3-DDDC-4B2C-8B88-68A26A8835D0`` The Gamezone Data WMI interface provides platform-profile and fan curve settings for devices that fall under the "Gaming Series" of Lenovo devices. It uses a notifier chain to inform other Lenovo WMI interface drivers of the -current platform profile when it changes. +current platform profile when it changes. The currently set profile can be +determined by the user on the hardware by looking at the color of the power +or profile LED, depending on the model. The following platform profiles are supported: - - low-power - - balanced - - balanced-performance - - performance - - custom + - low-power, blue LED + - balanced, white LED + - performance, red LED + - max-power, purple LED + - custom, purple LED -Balanced-Performance +Extreme Mode ~~~~~~~~~~~~~~~~~~~~ Some newer Lenovo "Gaming Series" laptops have an "Extreme Mode" profile -enabled in their BIOS. For these devices, the performance platform profile -corresponds to the BIOS Extreme Mode, while the balanced-performance -platform profile corresponds to the BIOS Performance mode. For legacy -devices, the performance platform profile will correspond with the BIOS -Performance mode. - -For some newer devices the "Extreme Mode" profile is incomplete in the BIOS -and setting it will cause undefined behavior. A BIOS bug quirk table is -provided to ensure these devices cannot set "Extreme Mode" from the driver. +enabled in their BIOS. When available, this mode will be represented by the +max-power platform profile. + +For a subset of these devices the "Extreme Mode" profile is incomplete in +the BIOS and setting it will cause undefined behavior. A BIOS bug quirk table +is provided to ensure these devices cannot set "Extreme Mode" from the driver. Custom Profile ~~~~~~~~~~~~~~ diff --git a/Documentation/wmi/devices/uniwill-laptop.rst b/Documentation/wmi/devices/uniwill-laptop.rst new file mode 100644 index 00000000000000..e246bf293450bd --- /dev/null +++ b/Documentation/wmi/devices/uniwill-laptop.rst @@ -0,0 +1,198 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +======================================== +Uniwill Notebook driver (uniwill-laptop) +======================================== + +Introduction +============ + +Many notebooks manufactured by Uniwill (either directly or as ODM) provide a EC interface +for controlling various platform settings like sensors and fan control. This interface is +used by the ``uniwill-laptop`` driver to map those features onto standard kernel interfaces. + +EC WMI interface description +============================ + +The EC WMI interface description can be decoded from the embedded binary MOF (bmof) +data using the `bmfdec `_ utility: + +:: + + [WMI, Dynamic, Provider("WmiProv"), Locale("MS\\0x409"), + Description("Class used to operate methods on a ULong"), + guid("{ABBC0F6F-8EA1-11d1-00A0-C90629100000}")] + class AcpiTest_MULong { + [key, read] string InstanceName; + [read] boolean Active; + + [WmiMethodId(1), Implemented, read, write, Description("Return the contents of a ULong")] + void GetULong([out, Description("Ulong Data")] uint32 Data); + + [WmiMethodId(2), Implemented, read, write, Description("Set the contents of a ULong")] + void SetULong([in, Description("Ulong Data")] uint32 Data); + + [WmiMethodId(3), Implemented, read, write, + Description("Generate an event containing ULong data")] + void FireULong([in, Description("WMI requires a parameter")] uint32 Hack); + + [WmiMethodId(4), Implemented, read, write, Description("Get and Set the contents of a ULong")] + void GetSetULong([in, Description("Ulong Data")] uint64 Data, + [out, Description("Ulong Data")] uint32 Return); + + [WmiMethodId(5), Implemented, read, write, + Description("Get and Set the contents of a ULong for Dollby button")] + void GetButton([in, Description("Ulong Data")] uint64 Data, + [out, Description("Ulong Data")] uint32 Return); + }; + +Most of the WMI-related code was copied from the Windows driver samples, which unfortunately means +that the WMI-GUID is not unique. This makes the WMI-GUID unusable for autoloading. + +WMI method GetULong() +--------------------- + +This WMI method was copied from the Windows driver samples and has no function. + +WMI method SetULong() +--------------------- + +This WMI method was copied from the Windows driver samples and has no function. + +WMI method FireULong() +---------------------- + +This WMI method allows to inject a WMI event with a 32-bit payload. Its primary purpose seems +to be debugging. + +WMI method GetSetULong() +------------------------ + +This WMI method is used to communicate with the EC. The ``Data`` argument holds the following +information (starting with the least significant byte): + +1. 16-bit address +2. 16-bit data (set to ``0x0000`` when reading) +3. 16-bit operation (``0x0100`` for reading and ``0x0000`` for writing) +4. 16-bit reserved (set to ``0x0000``) + +The first 8 bits of the ``Return`` value contain the data returned by the EC when reading. +The special value ``0xFEFEFEFE`` is used to indicate a communication failure with the EC. + +WMI method GetButton() +---------------------- + +This WMI method is not implemented on all machines and has an unknown purpose. + +Reverse-Engineering the EC WMI interface +======================================== + +.. warning:: Randomly poking the EC can potentially cause damage to the machine and other unwanted + side effects, please be careful. + +The EC behind the ``GetSetULong`` method is used by the OEM software supplied by the manufacturer. +Reverse-engineering of this software is difficult since it uses an obfuscator, however some parts +are not obfuscated. In this case `dnSpy `_ could also be helpful. + +The EC can be accessed under Windows using powershell (requires admin privileges): + +:: + + > $obj = Get-CimInstance -Namespace root/wmi -ClassName AcpiTest_MULong | Select-Object -First 1 + > Invoke-CimMethod -InputObject $obj -MethodName GetSetULong -Arguments @{Data = } + +WMI event interface description +=============================== + +The WMI interface description can also be decoded from the embedded binary MOF (bmof) +data: + +:: + + [WMI, Dynamic, Provider("WmiProv"), Locale("MS\\0x409"), + Description("Class containing event generated ULong data"), + guid("{ABBC0F72-8EA1-11d1-00A0-C90629100000}")] + class AcpiTest_EventULong : WmiEvent { + [key, read] string InstanceName; + [read] boolean Active; + + [WmiDataId(1), read, write, Description("ULong Data")] uint32 ULong; + }; + +Most of the WMI-related code was again copied from the Windows driver samples, causing this WMI +interface to suffer from the same restrictions as the EC WMI interface described above. + +WMI event data +-------------- + +The WMI event data contains a single 32-bit value which is used to indicate various platform events. + +Reverse-Engineering the Uniwill WMI event interface +=================================================== + +The driver logs debug messages when receiving a WMI event. Thus enabling debug messages will be +useful for finding unknown event codes. + +EC ACPI interface description +============================= + +The ``INOU0000`` ACPI device is a virtual device used to access various hardware registers +available on notebooks manufactured by Uniwill. Reading and writing those registers happens +by calling ACPI control methods. The ``uniwill-laptop`` driver uses this device to communicate +with the EC because the ACPI control methods are faster than the WMI methods described above. + +ACPI control methods used for reading registers take a single ACPI integer containing the address +of the register to read and return a ACPI integer containing the data inside said register. ACPI +control methods used for writing registers however take two ACPI integers, with the additional +ACPI integer containing the data to be written into the register. Such ACPI control methods return +nothing. + +System memory +------------- + +System memory can be accessed with a granularity of either a single byte (``MMRB`` for reading and +``MMWB`` for writing) or four bytes (``MMRD`` for reading and ``MMWD`` for writing). Those ACPI +control methods are unused because they provide no benefit when compared to the native memory +access functions provided by the kernel. + +EC RAM +------ + +The internal RAM of the EC can be accessed with a granularity of a single byte using the ``ECRR`` +(read) and ``ECRW`` (write) ACPI control methods, with the maximum register address being ``0xFFF``. +The OEM software waits 6 ms after calling one of those ACPI control methods, likely to avoid +overwhelming the EC when being connected over LPC. + +PCI config space +---------------- + +The PCI config space can be accessed with a granularity of four bytes using the ``PCRD`` (read) and +``PCWD`` (write) ACPI control methods. The exact address format is unknown, and poking random PCI +devices might confuse the PCI subsystem. Because of this those ACPI control methods are not used. + +IO ports +-------- + +IO ports can be accessed with a granularity of four bytes using the ``IORD`` (read) and ``IOWD`` +(write) ACPI control methods. Those ACPI control methods are unused because they provide no benefit +when compared to the native IO port access functions provided by the kernel. + +CMOS RAM +-------- + +The CMOS RAM can be accessed with a granularity of a single byte using the ``RCMS`` (read) and +``WCMS`` ACPI control methods. Using those ACPI methods might interfere with the native CMOS RAM +access functions provided by the kernel due to the usage of indexed IO, so they are unused. + +Indexed IO +---------- + +Indexed IO with IO ports with a granularity of a single byte can be performed using the ``RIOP`` +(read) and ``WIOP`` (write) ACPI control methods. Those ACPI methods are unused because they +provide no benifit when compared to the native IO port access functions provided by the kernel. + +Special thanks go to github user `pobrn` which developed the +`qc71_laptop `_ driver on which this driver is partly based. +The same is true for Tuxedo Computers, which developed the +`tuxedo-drivers `_ package +which also served as a foundation for this driver. diff --git a/LICENSES/preferred/LGPL-2.1 b/LICENSES/preferred/LGPL-2.1 index 105b9f3c5ba12e..4d1d06a0e8ffe7 100644 --- a/LICENSES/preferred/LGPL-2.1 +++ b/LICENSES/preferred/LGPL-2.1 @@ -9,9 +9,13 @@ Usage-Guide: guidelines in the licensing rules documentation. For 'GNU Lesser General Public License (LGPL) version 2.1 only' use: SPDX-License-Identifier: LGPL-2.1 + or: + SPDX-License-Identifier: LGPL-2.1-only For 'GNU Lesser General Public License (LGPL) version 2.1 or any later version' use: SPDX-License-Identifier: LGPL-2.1+ + or: + SPDX-License-Identifier: LGPL-2.1-or-later License-Text: GNU LESSER GENERAL PUBLIC LICENSE diff --git a/MAINTAINERS b/MAINTAINERS index e8f06145fb54c9..0d044a58cbfe0f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -195,7 +195,7 @@ F: drivers/pinctrl/pinctrl-upboard.c F: include/linux/mfd/upboard-fpga.h AB8500 BATTERY AND CHARGER DRIVERS -M: Linus Walleij +M: Linus Walleij F: Documentation/devicetree/bindings/power/supply/*ab8500* F: drivers/power/supply/*ab8500* @@ -388,7 +388,7 @@ B: https://bugzilla.kernel.org F: drivers/acpi/*thermal* ACPI VIOT DRIVER -M: Jean-Philippe Brucker +M: Jean-Philippe Brucker L: linux-acpi@vger.kernel.org L: iommu@lists.linux.dev S: Maintained @@ -402,7 +402,7 @@ S: Maintained F: Documentation/ABI/testing/sysfs-bus-wmi F: Documentation/driver-api/wmi.rst F: Documentation/wmi/ -F: drivers/platform/x86/wmi.c +F: drivers/platform/wmi/ F: include/uapi/linux/wmi.h ACRN HYPERVISOR SERVICE MODULE @@ -440,6 +440,18 @@ W: http://wiki.analog.com/AD5398 W: https://ez.analog.com/linux-software-drivers F: drivers/regulator/ad5398.c +AD5446 ANALOG DEVICES INC AD5446 DAC DRIVER +M: Michael Hennerich +M: Nuno Sá +L: linux-iio@vger.kernel.org +S: Supported +W: https://ez.analog.com/linux-software-drivers +F: Documentation/devicetree/bindings/iio/dac/adi,ad5446.yaml +F: drivers/iio/dac/ad5446-i2c.c +F: drivers/iio/dac/ad5446-spi.c +F: drivers/iio/dac/ad5446.c +F: drivers/iio/dac/ad5446.h + AD714X CAPACITANCE TOUCH SENSOR DRIVER (AD7142/3/7/8/7A) M: Michael Hennerich S: Supported @@ -974,7 +986,7 @@ F: drivers/edac/al_mc_edac.c AMAZON ANNAPURNA LABS THERMAL MMIO DRIVER M: Talel Shenhar S: Maintained -F: Documentation/devicetree/bindings/thermal/amazon,al-thermal.txt +F: Documentation/devicetree/bindings/thermal/amazon,al-thermal.yaml F: drivers/thermal/thermal_mmio.c AMAZON ETHERNET DRIVERS @@ -1081,7 +1093,7 @@ M: Austin Zheng M: Jun Lei S: Supported F: drivers/gpu/drm/amd/display/dc/dml/ -F: drivers/gpu/drm/amd/display/dc/dml2/ +F: drivers/gpu/drm/amd/display/dc/dml2_0/ AMD FAM15H PROCESSOR POWER MONITORING DRIVER M: Huang Rui @@ -1271,6 +1283,7 @@ F: include/uapi/drm/amdxdna_accel.h AMD XGBE DRIVER M: "Shyam Sundar S K" +M: Raju Rangoju L: netdev@vger.kernel.org S: Maintained F: arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi @@ -1758,6 +1771,7 @@ S: Supported W: http://wiki.analog.com/ W: https://ez.analog.com/linux-software-drivers F: Documentation/devicetree/bindings/sound/adi,* +F: Documentation/devicetree/bindings/sound/trivial-codec.yaml F: sound/soc/codecs/ad1* F: sound/soc/codecs/ad7* F: sound/soc/codecs/adau* @@ -1808,11 +1822,9 @@ ANDROID DRIVERS M: Greg Kroah-Hartman M: Arve Hjønnevåg M: Todd Kjos -M: Martijn Coenen -M: Joel Fernandes M: Christian Brauner M: Carlos Llamas -M: Suren Baghdasaryan +M: Alice Ryhl L: linux-kernel@vger.kernel.org S: Supported T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git @@ -2000,7 +2012,7 @@ ARM AND ARM64 SoC SUB-ARCHITECTURES (COMMON PARTS) M: Arnd Bergmann M: Krzysztof Kozlowski M: Alexandre Belloni -M: Linus Walleij +M: Linus Walleij R: Drew Fustini L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: soc@lists.linux.dev @@ -2022,6 +2034,15 @@ F: arch/arm64/include/asm/arch_timer.h F: drivers/clocksource/arm_arch_timer.c F: drivers/clocksource/arm_arch_timer_mmio.c +ARM ETHOS-U NPU DRIVER +M: Rob Herring (Arm) +M: Tomeu Vizoso +L: dri-devel@lists.freedesktop.org +S: Supported +T: git https://gitlab.freedesktop.org/drm/misc/kernel.git +F: drivers/accel/ethosu/ +F: include/uapi/drm/ethosu_accel.h + ARM GENERIC INTERRUPT CONTROLLER DRIVERS M: Marc Zyngier L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -2050,7 +2071,7 @@ F: Documentation/devicetree/bindings/display/arm,hdlcd.yaml F: drivers/gpu/drm/arm/hdlcd_* ARM INTEGRATOR, VERSATILE AND REALVIEW SUPPORT -M: Linus Walleij +M: Linus Walleij L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: Documentation/devicetree/bindings/arm/arm,integrator.yaml @@ -2097,7 +2118,8 @@ F: drivers/gpu/drm/arm/display/komeda/ ARM MALI PANFROST DRM DRIVER M: Boris Brezillon M: Rob Herring -R: Steven Price +M: Steven Price +M: Adrián Larumbe L: dri-devel@lists.freedesktop.org S: Supported T: git https://gitlab.freedesktop.org/drm/misc/kernel.git @@ -2106,6 +2128,20 @@ F: drivers/gpu/drm/ci/xfails/panfrost* F: drivers/gpu/drm/panfrost/ F: include/uapi/drm/panfrost_drm.h +ARM MALI-C55 ISP DRIVER +M: Daniel Scally +M: Jacopo Mondi +L: linux-media@vger.kernel.org +S: Maintained +T: git git://linuxtv.org/media_tree.git +F: Documentation/admin-guide/media/mali-c55-graph.dot +F: Documentation/admin-guide/media/mali-c55.rst +F: Documentation/devicetree/bindings/media/arm,mali-c55.yaml +F: Documentation/userspace-api/media/drivers/mali-c55.rst +F: Documentation/userspace-api/media/v4l/metafmt-arm-mali-c55.rst +F: drivers/media/platform/arm/mali-c55/ +F: include/uapi/linux/media/arm/mali-c55-config.h + ARM MALI PANTHOR DRM DRIVER M: Boris Brezillon M: Steven Price @@ -2123,7 +2159,7 @@ M: Alice Ryhl L: dri-devel@lists.freedesktop.org S: Supported W: https://rust-for-linux.com/tyr-gpu-driver -W https://drm.pages.freedesktop.org/maintainer-tools/drm-rust.html +W: https://drm.pages.freedesktop.org/maintainer-tools/drm-rust.html B: https://gitlab.freedesktop.org/panfrost/linux/-/issues T: git https://gitlab.freedesktop.org/drm/rust/kernel.git F: Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml @@ -2208,7 +2244,7 @@ F: Documentation/devicetree/bindings/memory-controllers/arm,pl35x-smc.yaml F: drivers/memory/pl353-smc.c ARM PRIMECELL SSP PL022 SPI DRIVER -M: Linus Walleij +M: Linus Walleij L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: Documentation/devicetree/bindings/spi/spi-pl022.yaml @@ -2221,7 +2257,7 @@ F: drivers/tty/serial/amba-pl01*.c F: include/linux/amba/serial.h ARM PRIMECELL VIC PL190/PL192 DRIVER -M: Linus Walleij +M: Linus Walleij L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: Documentation/devicetree/bindings/interrupt-controller/arm,vic.yaml @@ -2244,7 +2280,7 @@ F: drivers/iommu/arm/ F: drivers/iommu/io-pgtable-arm* ARM SMMU SVA SUPPORT -R: Jean-Philippe Brucker +R: Jean-Philippe Brucker F: drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c ARM SUB-ARCHITECTURES @@ -2269,7 +2305,7 @@ F: Documentation/devicetree/bindings/interrupt-controller/actions,owl-sirq.yaml F: Documentation/devicetree/bindings/mmc/owl-mmc.yaml F: Documentation/devicetree/bindings/net/actions,owl-emac.yaml F: Documentation/devicetree/bindings/pinctrl/actions,* -F: Documentation/devicetree/bindings/power/actions,owl-sps.txt +F: Documentation/devicetree/bindings/power/actions,s500-sps.yaml F: Documentation/devicetree/bindings/timer/actions,owl-timer.yaml F: arch/arm/boot/dts/actions/ F: arch/arm/mach-actions/ @@ -2303,7 +2339,7 @@ S: Maintained F: drivers/clk/sunxi/ ARM/Allwinner sunXi SoC support -M: Chen-Yu Tsai +M: Chen-Yu Tsai M: Jernej Skrabec M: Samuel Holland L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -2397,9 +2433,9 @@ M: Martin Povišer L: asahi@lists.linux.dev L: linux-sound@vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/sound/adi,ssm3515.yaml -F: Documentation/devicetree/bindings/sound/cirrus,cs42l84.yaml F: Documentation/devicetree/bindings/sound/apple,* +F: Documentation/devicetree/bindings/sound/cirrus,cs42l84.yaml +F: Documentation/devicetree/bindings/sound/trivial-codec.yaml F: sound/soc/apple/* F: sound/soc/codecs/cs42l83-i2c.c F: sound/soc/codecs/cs42l84.* @@ -2440,15 +2476,19 @@ F: Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml F: Documentation/devicetree/bindings/power/apple* F: Documentation/devicetree/bindings/power/reset/apple,smc-reboot.yaml F: Documentation/devicetree/bindings/pwm/apple,s5l-fpwm.yaml +F: Documentation/devicetree/bindings/rtc/apple,smc-rtc.yaml F: Documentation/devicetree/bindings/spi/apple,spi.yaml F: Documentation/devicetree/bindings/spmi/apple,spmi.yaml +F: Documentation/devicetree/bindings/usb/apple,dwc3.yaml F: Documentation/devicetree/bindings/watchdog/apple,wdt.yaml +F: Documentation/hwmon/macsmc-hwmon.rst F: arch/arm64/boot/dts/apple/ F: drivers/bluetooth/hci_bcm4377.c F: drivers/clk/clk-apple-nco.c F: drivers/cpufreq/apple-soc-cpufreq.c F: drivers/dma/apple-admac.c F: drivers/gpio/gpio-macsmc.c +F: drivers/hwmon/macsmc-hwmon.c F: drivers/pmdomain/apple/ F: drivers/i2c/busses/i2c-pasemi-core.c F: drivers/i2c/busses/i2c-pasemi-platform.c @@ -2463,9 +2503,11 @@ F: drivers/nvmem/apple-spmi-nvmem.c F: drivers/pinctrl/pinctrl-apple-gpio.c F: drivers/power/reset/macsmc-reboot.c F: drivers/pwm/pwm-apple.c +F: drivers/rtc/rtc-macsmc.c F: drivers/soc/apple/* F: drivers/spi/spi-apple.c F: drivers/spmi/spmi-apple-controller.c +F: drivers/usb/dwc3/dwc3-apple.c F: drivers/video/backlight/apple_dwi_bl.c F: drivers/watchdog/apple_wdt.c F: include/dt-bindings/interrupt-controller/apple-aic.h @@ -2534,7 +2576,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: Documentation/devicetree/bindings/arm/bitmain.yaml F: Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml -F: Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt +F: Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.yaml F: arch/arm64/boot/dts/bitmain/ F: drivers/clk/clk-bm1880.c F: drivers/pinctrl/pinctrl-bm1880.c @@ -2548,6 +2590,14 @@ S: Maintained F: Documentation/devicetree/bindings/arm/blaize.yaml F: arch/arm64/boot/dts/blaize/ +ARM/BST SOC SUPPORT +M: Ge Gordon +R: BST Linux Kernel Upstream Group +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Supported +F: Documentation/devicetree/bindings/arm/bst.yaml +F: arch/arm64/boot/dts/bst/ + ARM/CALXEDA HIGHBANK ARCHITECTURE M: Andre Przywara L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -2638,7 +2688,7 @@ F: tools/perf/util/cs-etm.* ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE M: Hans Ulli Kroll -M: Linus Walleij +M: Linus Walleij L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained T: git https://github.com/ulli-kroll/linux.git @@ -2661,7 +2711,7 @@ F: Documentation/ABI/testing/debugfs-moxtet F: Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu F: Documentation/ABI/testing/sysfs-bus-moxtet-devices F: Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm -F: Documentation/devicetree/bindings/bus/moxtet.txt +F: Documentation/devicetree/bindings/bus/cznic,moxtet.yaml F: Documentation/devicetree/bindings/firmware/cznic,turris-mox-rwtm.txt F: Documentation/devicetree/bindings/firmware/cznic,turris-omnia-mcu.yaml F: Documentation/devicetree/bindings/interrupt-controller/marvell,mpic.yaml @@ -3040,7 +3090,7 @@ F: include/dt-bindings/clock/mstar-* F: include/dt-bindings/gpio/msc313-gpio.h ARM/NOMADIK/Ux500 ARCHITECTURES -M: Linus Walleij +M: Linus Walleij L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik.git @@ -3137,6 +3187,15 @@ F: arch/arm64/boot/dts/freescale/s32g*.dts* F: drivers/pinctrl/nxp/ F: drivers/rtc/rtc-s32g.c +ARM/NXP S32G PCIE CONTROLLER DRIVER +M: Ciprian Marian Costea +R: NXP S32 Linux Team +L: imx@lists.linux.dev +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: Documentation/devicetree/bindings/pci/nxp,s32g-pcie.yaml +F: drivers/pci/controller/dwc/pcie-nxp-s32g* + ARM/NXP S32G/S32R DWMAC ETHERNET DRIVER M: Jan Petrous R: s32@nxp.com @@ -3301,6 +3360,7 @@ F: drivers/*/*/*rockchip* F: drivers/*/*rockchip* F: drivers/clk/rockchip/ F: drivers/i2c/busses/i2c-rk3x.c +F: drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c F: sound/soc/rockchip/ N: rockchip @@ -3407,7 +3467,7 @@ S: Maintained F: drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c ARM/SOCFPGA EDAC BINDINGS -M: Matthew Gerlach +M: Niravkumar L Rabara S: Maintained F: Documentation/devicetree/bindings/edac/altr,socfpga-ecc-manager.yaml @@ -3442,7 +3502,6 @@ F: drivers/clocksource/clksrc_st_lpc.c F: drivers/cpufreq/sti-cpufreq.c F: drivers/dma/st_fdma* F: drivers/i2c/busses/i2c-st.c -F: drivers/media/platform/st/sti/c8sectpfe/ F: drivers/media/rc/st_rc.c F: drivers/mmc/host/sdhci-st.c F: drivers/phy/st/phy-miphy28lp.c @@ -3737,7 +3796,7 @@ F: Documentation/devicetree/bindings/media/i2c/asahi-kasei,ak7375.yaml F: drivers/media/i2c/ak7375.c ASAHI KASEI AK8974 DRIVER -M: Linus Walleij +M: Linus Walleij L: linux-iio@vger.kernel.org S: Supported W: http://www.akm.com/ @@ -3750,6 +3809,13 @@ S: Maintained F: Documentation/devicetree/bindings/iio/chemical/aosong,ags02ma.yaml F: drivers/iio/chemical/ags02ma.c +AOSONG ADP810 DIFFERENTIAL PRESSURE SENSOR DRIVER +M: Akhilesh Patil +L: linux-iio@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/iio/pressure/aosong,adp810.yaml +F: drivers/iio/pressure/adp810.c + ASC7621 HARDWARE MONITOR DRIVER M: George Joseph L: linux-hwmon@vger.kernel.org @@ -3952,6 +4018,12 @@ F: drivers/power/reset/atc260x-poweroff.c F: drivers/regulator/atc260x-regulator.c F: include/linux/mfd/atc260x/* +ATCRTC100 RTC DRIVER +M: CL Wang +S: Supported +F: Documentation/devicetree/bindings/rtc/andestech,atcrtc100.yaml +F: drivers/rtc/rtc-atcrtc100.c + ATHEROS 71XX/9XXX GPIO DRIVER M: Alban Bedel S: Maintained @@ -4129,6 +4201,12 @@ S: Maintained F: Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml F: drivers/iio/adc/hx711.c +AWINIC AW99706 WLED BACKLIGHT DRIVER +M: Junjie Cao +S: Maintained +F: Documentation/devicetree/bindings/leds/backlight/awinic,aw99706.yaml +F: drivers/video/backlight/aw99706.c + AX.25 NETWORK LAYER L: linux-hams@vger.kernel.org S: Orphan @@ -4193,6 +4271,13 @@ W: https://ez.analog.com/linux-software-drivers F: Documentation/devicetree/bindings/pwm/adi,axi-pwmgen.yaml F: drivers/pwm/pwm-axi-pwmgen.c +AYANEO PLATFORM EC DRIVER +M: Antheas Kapenekakis +L: platform-driver-x86@vger.kernel.org +S: Maintained +F: Documentation/ABI/testing/sysfs-platform-ayaneo +F: drivers/platform/x86/ayaneo-ec.c + AZ6007 DVB DRIVER M: Mauro Carvalho Chehab L: linux-media@vger.kernel.org @@ -4306,7 +4391,7 @@ F: Documentation/filesystems/befs.rst F: fs/befs/ BFQ I/O SCHEDULER -M: Yu Kuai +M: Yu Kuai L: linux-block@vger.kernel.org S: Odd Fixes F: Documentation/block/bfq-iosched.rst @@ -4382,6 +4467,7 @@ F: arch/*/lib/bitops.c F: include/asm-generic/bitops F: include/asm-generic/bitops.h F: include/linux/bitops.h +F: lib/hweight.c F: lib/test_bitops.c F: tools/*/bitops* @@ -4406,6 +4492,8 @@ F: block/ F: drivers/block/ F: include/linux/bio.h F: include/linux/blk* +F: include/uapi/linux/blk* +F: include/uapi/linux/ioprio.h F: kernel/trace/blktrace.c F: lib/sbitmap.c @@ -4473,6 +4561,13 @@ F: include/net/bond* F: include/uapi/linux/if_bonding.h F: tools/testing/selftests/drivers/net/bonding/ +BOSCH SENSORTEC BMA220 ACCELEROMETER IIO DRIVER +M: Petre Rodan +L: linux-iio@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml +F: drivers/iio/accel/bma220* + BOSCH SENSORTEC BMA400 ACCELEROMETER IIO DRIVER M: Dan Robertson L: linux-iio@vger.kernel.org @@ -4538,7 +4633,7 @@ F: drivers/net/ethernet/netronome/nfp/bpf/ BPF JIT for POWERPC (32-BIT AND 64-BIT) M: Hari Bathini -M: Christophe Leroy +M: Christophe Leroy (CS GROUP) R: Naveen N Rao L: bpf@vger.kernel.org S: Supported @@ -4654,6 +4749,7 @@ F: Documentation/userspace-api/ebpf/ F: arch/*/net/* F: include/linux/bpf* F: include/linux/btf* +F: include/linux/buildid.h F: include/linux/filter.h F: include/trace/events/xdp.h F: include/uapi/linux/bpf* @@ -4830,7 +4926,9 @@ S: Maintained T: git https://github.com/broadcom/stblinux.git F: Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml F: drivers/pci/controller/pcie-brcmstb.c +F: drivers/platform/raspberrypi/vchiq-* F: drivers/staging/vc04_services +F: include/linux/raspberrypi/vchiq* N: bcm2711 N: bcm2712 N: bcm283* @@ -5131,7 +5229,6 @@ F: Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml F: drivers/net/ethernet/broadcom/genet/ F: drivers/net/ethernet/broadcom/unimac.h F: drivers/net/mdio/mdio-bcm-unimac.c -F: include/linux/platform_data/bcmgenet.h F: include/linux/platform_data/mdio-bcm-unimac.h BROADCOM IPROC ARM ARCHITECTURE @@ -5199,6 +5296,13 @@ W: http://www.broadcom.com F: drivers/infiniband/hw/bnxt_re/ F: include/uapi/rdma/bnxt_re-abi.h +BROADCOM 800 GIGABIT ROCE DRIVER +M: Siva Reddy Kallam +L: linux-rdma@vger.kernel.org +S: Supported +W: http://www.broadcom.com +F: drivers/infiniband/hw/bng_re/ + BROADCOM NVRAM DRIVER M: Rafał Miłecki L: linux-mips@vger.kernel.org @@ -5698,7 +5802,8 @@ F: drivers/power/supply/cw2015_battery.c CEPH COMMON CODE (LIBCEPH) M: Ilya Dryomov -M: Xiubo Li +M: Alex Markuze +M: Viacheslav Dubeyko L: ceph-devel@vger.kernel.org S: Supported W: http://ceph.com/ @@ -5709,8 +5814,9 @@ F: include/linux/crush/ F: net/ceph/ CEPH DISTRIBUTED FILE SYSTEM CLIENT (CEPH) -M: Xiubo Li M: Ilya Dryomov +M: Alex Markuze +M: Viacheslav Dubeyko L: ceph-devel@vger.kernel.org S: Supported W: http://ceph.com/ @@ -6069,7 +6175,7 @@ F: include/linux/clk.h CLOCKSOURCE, CLOCKEVENT DRIVERS M: Daniel Lezcano -M: Thomas Gleixner +M: Thomas Gleixner L: linux-kernel@vger.kernel.org S: Supported T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core @@ -6429,13 +6535,13 @@ F: rust/kernel/cpufreq.rs F: tools/testing/selftests/cpufreq/ CPU FREQUENCY DRIVERS - VIRTUAL MACHINE CPUFREQ -M: Saravana Kannan +M: Saravana Kannan L: linux-pm@vger.kernel.org S: Maintained F: drivers/cpufreq/virtual-cpufreq.c CPU HOTPLUG -M: Thomas Gleixner +M: Thomas Gleixner M: Peter Zijlstra L: linux-kernel@vger.kernel.org S: Maintained @@ -6602,6 +6708,7 @@ S: Maintained T: git https://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux.git libcrypto-next T: git https://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux.git libcrypto-fixes F: lib/crypto/ +F: scripts/crypto/ CRYPTO SPEED TEST COMPARE M: Wang Jinchao @@ -6613,7 +6720,6 @@ CRYPTOGRAPHIC RANDOM NUMBER GENERATOR M: Neil Horman L: linux-crypto@vger.kernel.org S: Maintained -F: crypto/ansi_cprng.c F: crypto/rng.c CS3308 MEDIA DRIVER @@ -6766,7 +6872,7 @@ S: Maintained F: drivers/pinctrl/pinctrl-cy8c95x0.c CYPRESS CY8CTMA140 TOUCHSCREEN DRIVER -M: Linus Walleij +M: Linus Walleij L: linux-input@vger.kernel.org S: Maintained F: drivers/input/touchscreen/cy8ctma140.c @@ -6786,13 +6892,13 @@ Q: http://patchwork.linuxtv.org/project/linux-media/list/ F: drivers/media/common/cypress_firmware* CYTTSP TOUCHSCREEN DRIVER -M: Linus Walleij +M: Linus Walleij L: linux-input@vger.kernel.org S: Maintained F: drivers/input/touchscreen/cyttsp* D-LINK DIR-685 TOUCHKEYS DRIVER -M: Linus Walleij +M: Linus Walleij L: linux-input@vger.kernel.org S: Supported F: drivers/input/keyboard/dlink-dir685-touchkeys.c @@ -6863,7 +6969,7 @@ F: Documentation/scsi/dc395x.rst F: drivers/scsi/dc395x.* DEBUGOBJECTS: -M: Thomas Gleixner +M: Thomas Gleixner L: linux-kernel@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git core/debugobjects @@ -7068,7 +7174,7 @@ F: drivers/base/devcoredump.c F: include/linux/devcoredump.h DEVICE DEPENDENCY HELPER SCRIPT -M: Saravana Kannan +M: Saravana Kannan L: linux-kernel@vger.kernel.org S: Maintained F: scripts/dev-needs.sh @@ -7131,6 +7237,7 @@ DEVICE-MAPPER (LVM) M: Alasdair Kergon M: Mike Snitzer M: Mikulas Patocka +M: Benjamin Marzinski L: dm-devel@lists.linux.dev S: Maintained Q: http://patchwork.kernel.org/project/dm-devel/list/ @@ -7197,7 +7304,6 @@ F: Documentation/devicetree/bindings/input/dlg,da72??.yaml F: Documentation/devicetree/bindings/input/dlg,da9062-onkey.yaml F: Documentation/devicetree/bindings/mfd/da90*.txt F: Documentation/devicetree/bindings/mfd/dlg,da90*.yaml -F: Documentation/devicetree/bindings/regulator/da92*.txt F: Documentation/devicetree/bindings/regulator/dlg,da9*.yaml F: Documentation/devicetree/bindings/regulator/dlg,slg51000.yaml F: Documentation/devicetree/bindings/sound/da[79]*.txt @@ -7316,6 +7422,7 @@ F: Documentation/userspace-api/dma-buf-alloc-exchange.rst F: drivers/dma-buf/ F: include/linux/*fence.h F: include/linux/dma-buf.h +F: include/linux/dma-buf/ F: include/linux/dma-resv.h K: \bdma_(?:buf|fence|resv)\b @@ -7419,16 +7526,10 @@ S: Maintained P: Documentation/doc-guide/maintainer-profile.rst T: git git://git.lwn.net/linux.git docs-next F: Documentation/ -F: scripts/check-variable-fonts.sh -F: scripts/checktransupdate.py -F: scripts/documentation-file-ref-check -F: scripts/get_abi.py F: scripts/kernel-doc* -F: scripts/lib/abi/* -F: scripts/lib/kdoc/* -F: tools/docs/* +F: tools/lib/python/* +F: tools/docs/ F: tools/net/ynl/pyynl/lib/doc_generator.py -F: scripts/sphinx-pre-install X: Documentation/ABI/ X: Documentation/admin-guide/media/ X: Documentation/devicetree/ @@ -7461,9 +7562,10 @@ DOCUMENTATION SCRIPTS M: Mauro Carvalho Chehab L: linux-doc@vger.kernel.org S: Maintained -F: Documentation/sphinx/parse-headers.pl -F: scripts/documentation-file-ref-check -F: scripts/sphinx-pre-install +F: Documentation/sphinx/ +F: scripts/kernel-doc* +F: tools/lib/python/* +F: tools/docs/ DOCUMENTATION/ITALIAN M: Federico Vaga @@ -7486,7 +7588,7 @@ F: Documentation/devicetree/bindings/media/i2c/dongwoon,dw9714.yaml F: drivers/media/i2c/dw9714.c DONGWOON DW9719 LENS VOICE COIL DRIVER -M: Daniel Scally +M: Daniel Scally L: linux-media@vger.kernel.org S: Maintained T: git git://linuxtv.org/media.git @@ -7644,8 +7746,7 @@ F: drivers/accel/ F: include/drm/drm_accel.h DRM DRIVER FOR ALLWINNER DE2 AND DE3 ENGINE -M: Maxime Ripard -M: Chen-Yu Tsai +M: Chen-Yu Tsai R: Jernej Skrabec L: dri-devel@lists.freedesktop.org S: Supported @@ -7661,13 +7762,13 @@ T: git https://gitlab.freedesktop.org/drm/misc/kernel.git F: drivers/gpu/drm/tiny/appletbdrm.c DRM DRIVER FOR ARM PL111 CLCD -M: Linus Walleij +M: Linus Walleij S: Maintained T: git https://gitlab.freedesktop.org/drm/misc/kernel.git F: drivers/gpu/drm/pl111/ DRM DRIVER FOR ARM VERSATILE TFT PANELS -M: Linus Walleij +M: Linus Walleij S: Maintained T: git https://gitlab.freedesktop.org/drm/misc/kernel.git F: Documentation/devicetree/bindings/display/panel/arm,versatile-tft-panel.yaml @@ -7717,7 +7818,7 @@ F: Documentation/devicetree/bindings/display/panel/ebbg,ft8719.yaml F: drivers/gpu/drm/panel/panel-ebbg-ft8719.c DRM DRIVER FOR FARADAY TVE200 TV ENCODER -M: Linus Walleij +M: Linus Walleij S: Maintained T: git https://gitlab.freedesktop.org/drm/misc/kernel.git F: drivers/gpu/drm/tve200/ @@ -7754,7 +7855,8 @@ F: Documentation/devicetree/bindings/display/panel/panel-edp.yaml F: drivers/gpu/drm/panel/panel-edp.c DRM DRIVER FOR GENERIC USB DISPLAY -S: Orphan +M: Ruben Wauters +S: Maintained W: https://github.com/notro/gud/wiki T: git https://gitlab.freedesktop.org/drm/misc/kernel.git F: drivers/gpu/drm/gud/ @@ -7876,6 +7978,7 @@ DRM DRIVER for Qualcomm Adreno GPUs M: Rob Clark R: Sean Paul R: Konrad Dybcio +R: Akhil P Oommen L: linux-arm-msm@vger.kernel.org L: dri-devel@lists.freedesktop.org L: freedreno@lists.freedesktop.org @@ -7895,7 +7998,7 @@ DRM DRIVER for Qualcomm display hardware M: Rob Clark M: Dmitry Baryshkov R: Abhinav Kumar -R: Jessica Zhang +R: Jessica Zhang R: Sean Paul R: Marijn Suijten L: linux-arm-msm@vger.kernel.org @@ -7911,14 +8014,14 @@ F: include/dt-bindings/clock/qcom,dsi-phy-28nm.h F: include/uapi/drm/msm_drm.h DRM DRIVER FOR NOVATEK NT35510 PANELS -M: Linus Walleij +M: Linus Walleij S: Maintained T: git https://gitlab.freedesktop.org/drm/misc/kernel.git F: Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml F: drivers/gpu/drm/panel/panel-novatek-nt35510.c DRM DRIVER FOR NOVATEK NT35560 PANELS -M: Linus Walleij +M: Linus Walleij S: Maintained T: git https://gitlab.freedesktop.org/drm/misc/kernel.git F: Documentation/devicetree/bindings/display/panel/sony,acx424akp.yaml @@ -7968,7 +8071,7 @@ W: https://rust-for-linux.com/nova-gpu-driver Q: https://patchwork.freedesktop.org/project/nouveau/ B: https://gitlab.freedesktop.org/drm/nova/-/issues C: irc://irc.oftc.net/nouveau -T: git https://gitlab.freedesktop.org/drm/nova.git nova-next +T: git https://gitlab.freedesktop.org/drm/rust/kernel.git drm-rust-next F: Documentation/gpu/nova/ F: drivers/gpu/nova-core/ @@ -7980,7 +8083,7 @@ W: https://rust-for-linux.com/nova-gpu-driver Q: https://patchwork.freedesktop.org/project/nouveau/ B: https://gitlab.freedesktop.org/drm/nova/-/issues C: irc://irc.oftc.net/nouveau -T: git https://gitlab.freedesktop.org/drm/nova.git nova-next +T: git https://gitlab.freedesktop.org/drm/rust/kernel.git drm-rust-next F: Documentation/gpu/nova/ F: drivers/gpu/drm/nova/ F: include/uapi/drm/nova_drm.h @@ -8036,7 +8139,7 @@ F: Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml F: drivers/gpu/drm/panel/panel-raydium-rm67191.c DRM DRIVER FOR SAMSUNG DB7430 PANELS -M: Linus Walleij +M: Linus Walleij S: Maintained T: git https://gitlab.freedesktop.org/drm/misc/kernel.git F: Documentation/devicetree/bindings/display/panel/samsung,lms397kf04.yaml @@ -8064,12 +8167,25 @@ S: Maintained F: Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml F: drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c +DRM DRIVER FOR SAMSUNG S6E3FC2X01 DDIC +M: David Heidelberg +S: Maintained +F: Documentation/devicetree/bindings/display/panel/samsung,s6e3fc2x01.yaml +F: drivers/gpu/drm/panel/panel-samsung-s6e3fc2x01.c + DRM DRIVER FOR SAMSUNG S6E3HA8 PANELS M: Dzmitry Sankouski S: Maintained F: Documentation/devicetree/bindings/display/panel/samsung,s6e3ha8.yaml F: drivers/gpu/drm/panel/panel-samsung-s6e3ha8.c +DRM DRIVER FOR SAMSUNG SOFEF00 DDIC +M: David Heidelberg +M: Casey Connolly +S: Maintained +F: Documentation/devicetree/bindings/display/panel/samsung,sofef00.yaml +F: drivers/gpu/drm/panel/panel-samsung-sofef00.c + DRM DRIVER FOR SHARP MEMORY LCD M: Alex Lanzano S: Maintained @@ -8120,7 +8236,7 @@ F: Documentation/devicetree/bindings/display/solomon,ssd13*.yaml F: drivers/gpu/drm/solomon/ssd130x* DRM DRIVER FOR ST-ERICSSON MCDE -M: Linus Walleij +M: Linus Walleij S: Maintained T: git https://gitlab.freedesktop.org/drm/misc/kernel.git F: Documentation/devicetree/bindings/display/ste,mcde.yaml @@ -8152,7 +8268,7 @@ F: Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml F: drivers/gpu/drm/bridge/ti-sn65dsi86.c DRM DRIVER FOR TPO TPG110 PANELS -M: Linus Walleij +M: Linus Walleij S: Maintained T: git https://gitlab.freedesktop.org/drm/misc/kernel.git F: Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml @@ -8196,7 +8312,7 @@ F: drivers/gpu/drm/vmwgfx/ F: include/uapi/drm/vmwgfx_drm.h DRM DRIVER FOR WIDECHIPS WS2401 PANELS -M: Linus Walleij +M: Linus Walleij S: Maintained T: git https://gitlab.freedesktop.org/drm/misc/kernel.git F: Documentation/devicetree/bindings/display/panel/samsung,lms380kf01.yaml @@ -8245,6 +8361,7 @@ X: drivers/gpu/drm/msm/ X: drivers/gpu/drm/nova/ X: drivers/gpu/drm/radeon/ X: drivers/gpu/drm/tegra/ +X: drivers/gpu/drm/tyr/ X: drivers/gpu/drm/xe/ DRM DRIVERS AND COMMON INFRASTRUCTURE [RUST] @@ -8254,12 +8371,12 @@ S: Supported W: https://drm.pages.freedesktop.org/maintainer-tools/drm-rust.html T: git https://gitlab.freedesktop.org/drm/rust/kernel.git F: drivers/gpu/drm/nova/ +F: drivers/gpu/drm/tyr/ F: drivers/gpu/nova-core/ F: rust/kernel/drm/ DRM DRIVERS FOR ALLWINNER A10 -M: Maxime Ripard -M: Chen-Yu Tsai +M: Chen-Yu Tsai L: dri-devel@lists.freedesktop.org S: Supported T: git https://gitlab.freedesktop.org/drm/misc/kernel.git @@ -8586,6 +8703,7 @@ S: Supported T: git https://gitlab.freedesktop.org/drm/misc/kernel.git F: drivers/gpu/drm/scheduler/ F: include/drm/gpu_scheduler.h +F: include/drm/spsc_queue.h DRM GPUVM M: Danilo Krummrich @@ -8608,7 +8726,7 @@ F: drivers/gpu/drm/clients/drm_log.c DRM PANEL DRIVERS M: Neil Armstrong -R: Jessica Zhang +R: Jessica Zhang L: dri-devel@lists.freedesktop.org S: Maintained T: git https://gitlab.freedesktop.org/drm/misc/kernel.git @@ -9188,6 +9306,9 @@ S: Maintained F: kernel/power/energy_model.c F: include/linux/energy_model.h F: Documentation/power/energy-model.rst +F: Documentation/netlink/specs/em.yaml +F: include/uapi/linux/energy_model.h +F: kernel/power/em_netlink*.* EPAPR HYPERVISOR BYTE CHANNEL DEVICE DRIVER M: Laurentiu Tudor @@ -9490,7 +9611,7 @@ F: include/linux/fanotify.h F: include/uapi/linux/fanotify.h FARADAY FOTG210 USB2 DUAL-ROLE CONTROLLER -M: Linus Walleij +M: Linus Walleij L: linux-usb@vger.kernel.org S: Maintained F: drivers/usb/fotg210/ @@ -10011,7 +10132,7 @@ F: drivers/spi/spi-fsl-qspi.c FREESCALE QUICC ENGINE LIBRARY M: Qiang Zhao -M: Christophe Leroy +M: Christophe Leroy (CS GROUP) L: linuxppc-dev@lists.ozlabs.org S: Maintained F: drivers/soc/fsl/qe/ @@ -10064,7 +10185,7 @@ S: Maintained F: drivers/tty/serial/ucc_uart.c FREESCALE SOC DRIVERS -M: Christophe Leroy +M: Christophe Leroy (CS GROUP) L: linuxppc-dev@lists.ozlabs.org L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained @@ -10251,7 +10372,7 @@ F: include/uapi/linux/fuse.h F: tools/testing/selftests/filesystems/fuse/ FUTEX SUBSYSTEM -M: Thomas Gleixner +M: Thomas Gleixner M: Ingo Molnar R: Peter Zijlstra R: Darren Hart @@ -10395,7 +10516,7 @@ F: drivers/base/arch_topology.c F: include/linux/arch_topology.h GENERIC ENTRY CODE -M: Thomas Gleixner +M: Thomas Gleixner M: Peter Zijlstra M: Andy Lutomirski L: linux-kernel@vger.kernel.org @@ -10447,7 +10568,7 @@ F: include/uapi/asm-generic/ GENERIC PHY FRAMEWORK M: Vinod Koul -M: Kishon Vijay Abraham I +R: Neil Armstrong L: linux-phy@lists.infradead.org S: Supported Q: https://patchwork.kernel.org/project/linux-phy/list/ @@ -10508,7 +10629,7 @@ F: drivers/uio/uio_pci_generic.c GENERIC VDSO LIBRARY M: Andy Lutomirski -M: Thomas Gleixner +M: Thomas Gleixner M: Vincenzo Frascino L: linux-kernel@vger.kernel.org S: Maintained @@ -10535,7 +10656,7 @@ L: gfs2@lists.linux.dev S: Supported B: https://bugzilla.kernel.org/enter_bug.cgi?product=File%20System&component=gfs2 T: git git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2.git -F: Documentation/filesystems/gfs2* +F: Documentation/filesystems/gfs2/ F: fs/gfs2/ F: include/uapi/linux/gfs2_ondisk.h @@ -10608,8 +10729,9 @@ F: Documentation/devicetree/bindings/clock/google,gs101-clock.yaml F: Documentation/devicetree/bindings/soc/google/google,gs101-pmu-intr-gen.yaml F: arch/arm64/boot/dts/exynos/google/ F: drivers/clk/samsung/clk-gs101.c +F: drivers/soc/samsung/gs101-pmu.c F: drivers/phy/samsung/phy-gs101-ufs.c -F: include/dt-bindings/clock/google,gs101.h +F: include/dt-bindings/clock/google,gs101* K: [gG]oogle.?[tT]ensor GPD FAN DRIVER @@ -10628,7 +10750,9 @@ F: drivers/platform/x86/gpd-pocket-fan.c GPIB DRIVERS M: Dave Penkler S: Maintained -F: drivers/staging/gpib/ +F: drivers/gpib/ +F: include/uapi/linux/gpib.h +F: include/uapi/linux/gpib_ioctl.h GPIO ACPI SUPPORT M: Mika Westerberg @@ -10677,7 +10801,7 @@ F: drivers/gpio/gpio-sloppy-logic-analyzer.c F: tools/gpio/gpio-sloppy-logic-analyzer.sh GPIO SUBSYSTEM -M: Linus Walleij +M: Linus Walleij M: Bartosz Golaszewski L: linux-gpio@vger.kernel.org S: Maintained @@ -11118,7 +11242,7 @@ F: drivers/hid/hid-logitech-hidpp.c HIGH-RESOLUTION TIMERS, TIMER WHEEL, CLOCKEVENTS M: Anna-Maria Behnsen M: Frederic Weisbecker -M: Thomas Gleixner +M: Thomas Gleixner L: linux-kernel@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core @@ -11141,7 +11265,7 @@ R: Boqun Feng R: FUJITA Tomonori R: Frederic Weisbecker R: Lyude Paul -R: Thomas Gleixner +R: Thomas Gleixner R: Anna-Maria Behnsen R: John Stultz R: Stephen Boyd @@ -11541,6 +11665,8 @@ F: mm/hugetlb.c F: mm/hugetlb_cgroup.c F: mm/hugetlb_cma.c F: mm/hugetlb_cma.h +F: mm/hugetlb_sysctl.c +F: mm/hugetlb_sysfs.c F: mm/hugetlb_vmemmap.c F: mm/hugetlb_vmemmap.h F: tools/testing/selftests/cgroup/test_hugetlb_memcg.c @@ -11558,6 +11684,8 @@ M: Miaohe Lin R: Naoya Horiguchi L: linux-mm@kvack.org S: Maintained +F: include/linux/memory-failure.h +F: include/trace/events/memory-failure.h F: mm/hwpoison-inject.c F: mm/memory-failure.c @@ -11582,7 +11710,7 @@ T: git git://linuxtv.org/media.git F: drivers/media/i2c/hi556.c HYNIX HI846 SENSOR DRIVER -M: Martin Kepplinger +M: Martin Kepplinger-Novakovic L: linux-media@vger.kernel.org S: Maintained F: drivers/media/i2c/hi846.c @@ -11598,6 +11726,7 @@ M: "K. Y. Srinivasan" M: Haiyang Zhang M: Wei Liu M: Dexuan Cui +M: Long Li L: linux-hyperv@vger.kernel.org S: Supported T: git git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux.git @@ -11615,6 +11744,7 @@ F: arch/x86/kernel/cpu/mshyperv.c F: drivers/clocksource/hyperv_timer.c F: drivers/hid/hid-hyperv.c F: drivers/hv/ +F: drivers/infiniband/hw/mana/ F: drivers/input/serio/hyperv-keyboard.c F: drivers/iommu/hyperv-iommu.c F: drivers/net/ethernet/microsoft/ @@ -11633,6 +11763,7 @@ F: include/hyperv/hvhdk_mini.h F: include/linux/hyperv.h F: include/net/mana F: include/uapi/linux/hyperv.h +F: include/uapi/rdma/mana-abi.h F: net/vmw_vsock/hyperv_transport.c F: tools/hv/ @@ -11667,6 +11798,7 @@ HUNG TASK DETECTOR M: Andrew Morton R: Lance Yang R: Masami Hiramatsu +R: Petr Mladek L: linux-kernel@vger.kernel.org S: Maintained F: include/linux/hung_task.h @@ -11745,6 +11877,16 @@ F: include/linux/i2c.h F: include/uapi/linux/i2c-*.h F: include/uapi/linux/i2c.h +I2C SUBSYSTEM [RUST] +M: Igor Korotin +R: Danilo Krummrich +R: Daniel Almeida +L: rust-for-linux@vger.kernel.org +S: Maintained +F: rust/kernel/i2c.rs +F: samples/rust/rust_driver_i2c.rs +F: samples/rust/rust_i2c_client.rs + I2C SUBSYSTEM HOST DRIVERS M: Andi Shyti L: linux-i2c@vger.kernel.org @@ -12224,11 +12366,13 @@ L: industrypack-devel@lists.sourceforge.net S: Maintained W: http://industrypack.sourceforge.net F: drivers/ipack/ +F: include/linux/ipack.h INFINEON DPS310 Driver M: Eddie James L: linux-iio@vger.kernel.org S: Maintained +F: Documentation/devicetree/bindings/iio/pressure/infineon,dps310.yaml F: drivers/iio/pressure/dps310.c INFINEON PEB2466 ASoC CODEC @@ -12507,6 +12651,13 @@ F: drivers/gpu/drm/xe/ F: include/drm/intel/ F: include/uapi/drm/xe_drm.h +INTEL ELKHART LAKE PSE I/O DRIVER +M: Raag Jadav +L: platform-driver-x86@vger.kernel.org +S: Supported +F: drivers/platform/x86/intel/ehl_pse_io.c +F: include/linux/ehl_pse_io_aux.h + INTEL ETHERNET DRIVERS M: Tony Nguyen M: Przemek Kitszel @@ -12570,6 +12721,7 @@ F: drivers/dma/ioat* INTEL IAA CRYPTO DRIVER M: Kristen Accardi M: Vinicius Costa Gomes +M: Kanchana P Sridhar L: linux-crypto@vger.kernel.org S: Supported F: Documentation/driver-api/crypto/iaa/iaa-crypto.rst @@ -12621,7 +12773,7 @@ INTEL IPU3 CSI-2 CIO2 DRIVER M: Yong Zhi M: Sakari Ailus M: Bingbu Cao -M: Dan Scally +M: Dan Scally R: Tianshu Qiu L: linux-media@vger.kernel.org S: Maintained @@ -12743,7 +12895,7 @@ F: drivers/mfd/intel-m10-bmc* F: include/linux/mfd/intel-m10-bmc.h INTEL MAX10 BMC SECURE UPDATES -M: Matthew Gerlach +M: Xu Yilun L: linux-fpga@vger.kernel.org S: Maintained F: Documentation/ABI/testing/sysfs-driver-intel-m10-bmc-sec-update @@ -13042,8 +13194,16 @@ F: Documentation/ABI/testing/sysfs-bus-iio-inv_icm42600 F: Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml F: drivers/iio/imu/inv_icm42600/ +INVENSENSE ICM-456xx IMU DRIVER +M: Remi Buisson +L: linux-iio@vger.kernel.org +S: Maintained +W: https://invensense.tdk.com/ +F: Documentation/devicetree/bindings/iio/imu/invensense,icm45600.yaml +F: drivers/iio/imu/inv_icm45600/ + INVENSENSE MPU-3050 GYROSCOPE DRIVER -M: Linus Walleij +M: Linus Walleij L: linux-iio@vger.kernel.org S: Maintained F: Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml @@ -13175,7 +13335,7 @@ F: Documentation/devicetree/bindings/sound/irondevice,* F: sound/soc/codecs/sma* IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY) -M: Thomas Gleixner +M: Thomas Gleixner S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core F: Documentation/core-api/irq/irq-domain.rst @@ -13185,7 +13345,7 @@ F: kernel/irq/irqdomain.c F: kernel/irq/msi.c IRQ SUBSYSTEM -M: Thomas Gleixner +M: Thomas Gleixner L: linux-kernel@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core @@ -13198,7 +13358,7 @@ F: kernel/irq/ F: lib/group_cpus.c IRQCHIP DRIVERS -M: Thomas Gleixner +M: Thomas Gleixner L: linux-kernel@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core @@ -13500,7 +13660,7 @@ F: fs/autofs/ KERNEL BUILD + files below scripts/ (unless maintained elsewhere) M: Nathan Chancellor -M: Nicolas Schier +M: Nicolas Schier L: linux-kbuild@vger.kernel.org S: Odd Fixes Q: https://patchwork.kernel.org/project/linux-kbuild/list/ @@ -13559,6 +13719,7 @@ R: Dai Ngo R: Tom Talpey L: linux-nfs@vger.kernel.org S: Supported +P: Documentation/filesystems/nfs/nfsd-maintainer-entry-profile.rst B: https://bugzilla.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux.git F: Documentation/filesystems/nfs/ @@ -13578,6 +13739,10 @@ F: include/uapi/linux/sunrpc/ F: net/sunrpc/ F: tools/net/sunrpc/ +KERNEL NFSD BLOCK and SCSI LAYOUT DRIVER +R: Christoph Hellwig +F: fs/nfsd/blocklayout* + KERNEL PACMAN PACKAGING (in addition to generic KERNEL BUILD) M: Thomas Weißschuh R: Christian Heusel @@ -13791,14 +13956,16 @@ F: kernel/kexec* KEXEC HANDOVER (KHO) M: Alexander Graf M: Mike Rapoport -M: Changyuan Lyu +M: Pasha Tatashin +R: Pratyush Yadav L: kexec@lists.infradead.org L: linux-mm@kvack.org S: Maintained F: Documentation/admin-guide/mm/kho.rst F: Documentation/core-api/kho/* F: include/linux/kexec_handover.h -F: kernel/kexec_handover.c +F: include/linux/kho/ +F: kernel/liveupdate/kexec_handover* F: lib/test_kho.c F: tools/testing/selftests/kho/ @@ -13967,7 +14134,7 @@ F: drivers/auxdisplay/ks0108.c F: include/linux/ks0108.h KTD253 BACKLIGHT DRIVER -M: Linus Walleij +M: Linus Walleij S: Maintained F: Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml F: drivers/video/backlight/ktd253-backlight.c @@ -14055,7 +14222,7 @@ F: tools/testing/selftests/landlock/ K: landlock K: LANDLOCK -LANTIQ / INTEL Ethernet drivers +LANTIQ / MAXLINEAR / INTEL Ethernet DSA drivers M: Hauke Mehrtens L: netdev@vger.kernel.org S: Maintained @@ -14063,6 +14230,7 @@ F: Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml F: drivers/net/dsa/lantiq/* F: drivers/net/ethernet/lantiq_xrx200.c F: net/dsa/tag_gswip.c +F: net/dsa/tag_mxl-gsw1xx.c LANTIQ MIPS ARCHITECTURE M: John Crispin @@ -14178,7 +14346,7 @@ F: drivers/ata/pata_arasan_cf.c F: include/linux/pata_arasan_cf_data.h LIBATA PATA FARADAY FTIDE010 AND GEMINI SATA BRIDGE DRIVERS -M: Linus Walleij +M: Linus Walleij L: linux-ide@vger.kernel.org S: Maintained F: drivers/ata/pata_ftide010.c @@ -14284,7 +14452,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git mm-nonmm-unstab F: lib/* LICENSES and SPDX stuff -M: Thomas Gleixner +M: Thomas Gleixner M: Greg Kroah-Hartman L: linux-spdx@vger.kernel.org S: Maintained @@ -14315,7 +14483,7 @@ LINUX FOR POWERPC (32-BIT AND 64-BIT) M: Madhavan Srinivasan M: Michael Ellerman R: Nicholas Piggin -R: Christophe Leroy +R: Christophe Leroy (CS GROUP) L: linuxppc-dev@lists.ozlabs.org S: Supported W: https://github.com/linuxppc/wiki/wiki @@ -14371,7 +14539,7 @@ F: Documentation/devicetree/bindings/powerpc/fsl/ F: arch/powerpc/platforms/85xx/ LINUX FOR POWERPC EMBEDDED PPC8XX AND PPC83XX -M: Christophe Leroy +M: Christophe Leroy (CS GROUP) L: linuxppc-dev@lists.ozlabs.org S: Maintained F: arch/powerpc/platforms/8xx/ @@ -14459,12 +14627,30 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching.g F: Documentation/ABI/testing/sysfs-kernel-livepatch F: Documentation/livepatch/ F: arch/powerpc/include/asm/livepatch.h -F: include/linux/livepatch.h +F: include/linux/livepatch*.h F: kernel/livepatch/ F: kernel/module/livepatch.c F: samples/livepatch/ +F: scripts/livepatch/ F: tools/testing/selftests/livepatch/ +LIVE UPDATE +M: Pasha Tatashin +M: Mike Rapoport +R: Pratyush Yadav +L: linux-kernel@vger.kernel.org +S: Maintained +F: Documentation/core-api/liveupdate.rst +F: Documentation/mm/memfd_preservation.rst +F: Documentation/userspace-api/liveupdate.rst +F: include/linux/kho/abi/ +F: include/linux/liveupdate.h +F: include/linux/liveupdate/ +F: include/uapi/linux/liveupdate.h +F: kernel/liveupdate/ +F: mm/memfd_luo.c +F: tools/testing/selftests/liveupdate/ + LLC (802.2) L: netdev@vger.kernel.org S: Odd fixes @@ -14536,6 +14722,7 @@ S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git locking/core F: Documentation/locking/ F: arch/*/include/asm/spinlock*.h +F: include/linux/local_lock*.h F: include/linux/lockdep*.h F: include/linux/mutex*.h F: include/linux/rwlock*.h @@ -14680,6 +14867,7 @@ LOONGSON-2K Board Management Controller (BMC) DRIVER M: Binbin Zhou M: Chong Qiao S: Maintained +F: drivers/char/ipmi/ipmi_si_ls2k.c F: drivers/mfd/ls2k-bmc-core.c LOONGSON EDAC DRIVER @@ -15178,6 +15366,15 @@ S: Orphan F: drivers/video/fbdev/matrox/matroxfb_* F: include/uapi/linux/matroxfb.h +MAX14001/MAX14002 IIO ADC DRIVER +M: Kim Seer Paller +M: Marilene Andrade Garcia +L: linux-iio@vger.kernel.org +S: Maintained +W: https://ez.analog.com/linux-software-drivers +F: Documentation/devicetree/bindings/iio/adc/adi,max14001.yaml +F: drivers/iio/adc/max14001.c + MAX15301 DRIVER M: Daniel Nilsson L: linux-hwmon@vger.kernel.org @@ -15185,6 +15382,15 @@ S: Maintained F: Documentation/hwmon/max15301.rst F: drivers/hwmon/pmbus/max15301.c +MAX17616 HARDWARE MONITOR DRIVER +M: Kim Seer Paller +L: linux-hwmon@vger.kernel.org +S: Supported +W: https://ez.analog.com/linux-software-drivers +F: Documentation/devicetree/bindings/hwmon/pmbus/adi,max17616.yaml +F: Documentation/hwmon/max17616.rst +F: drivers/hwmon/pmbus/max17616.c + MAX2175 SDR TUNER DRIVER M: Ramesh Shanmugasundaram L: linux-media@vger.kernel.org @@ -15412,14 +15618,12 @@ S: Supported F: drivers/net/phy/mxl-86110.c F: drivers/net/phy/mxl-gpy.c -MCAN MMIO DEVICE DRIVER -M: Chandrasekar Ramakrishnan +MCAN DEVICE DRIVER +M: Markus Schneider-Pargmann L: linux-can@vger.kernel.org S: Maintained F: Documentation/devicetree/bindings/net/can/bosch,m_can.yaml -F: drivers/net/can/m_can/m_can.c -F: drivers/net/can/m_can/m_can.h -F: drivers/net/can/m_can/m_can_platform.c +F: drivers/net/can/m_can/ MCBA MICROCHIP CAN BUS ANALYZER TOOL DRIVER R: Yasushi SHOJI @@ -15543,6 +15747,8 @@ F: drivers/media/pci/ddbridge/* MEDIA DRIVERS FOR FREESCALE IMX M: Steve Longerbeam M: Philipp Zabel +R: Frank Li +L: imx@lists.linux.dev L: linux-media@vger.kernel.org S: Maintained T: git git://linuxtv.org/media.git @@ -15555,8 +15761,10 @@ F: include/media/imx.h MEDIA DRIVERS FOR FREESCALE IMX7/8 M: Rui Miguel Silva M: Laurent Pinchart -M: Martin Kepplinger +M: Martin Kepplinger-Novakovic R: Purism Kernel Team +R: Frank Li +L: imx@lists.linux.dev L: linux-media@vger.kernel.org S: Maintained T: git git://linuxtv.org/media.git @@ -16225,6 +16433,7 @@ MEMORY HOT(UN)PLUG M: David Hildenbrand M: Oscar Salvador L: linux-mm@kvack.org +L: linux-cxl@vger.kernel.org S: Maintained F: Documentation/admin-guide/mm/memory-hotplug.rst F: Documentation/core-api/memory-hotplug.rst @@ -16261,6 +16470,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm F: include/linux/gfp.h F: include/linux/gfp_types.h F: include/linux/highmem.h +F: include/linux/leafops.h F: include/linux/memory.h F: include/linux/mm.h F: include/linux/mm_*.h @@ -16268,6 +16478,7 @@ F: include/linux/mmzone.h F: include/linux/mmdebug.h F: include/linux/mmu_notifier.h F: include/linux/pagewalk.h +F: include/linux/pgalloc.h F: include/linux/pgtable.h F: include/linux/ptdump.h F: include/linux/vmpressure.h @@ -16548,6 +16759,7 @@ F: tools/testing/selftests/mm/transhuge-stress.c MEMORY MANAGEMENT - USERFAULTFD M: Andrew Morton +M: Mike Rapoport R: Peter Xu L: linux-mm@kvack.org S: Maintained @@ -17411,6 +17623,7 @@ M: Luis Chamberlain M: Petr Pavlu M: Daniel Gomez R: Sami Tolvanen +R: Aaron Tomlin L: linux-modules@vger.kernel.org L: linux-kernel@vger.kernel.org S: Maintained @@ -17420,6 +17633,8 @@ F: include/linux/module*.h F: kernel/module/ F: lib/test_kmod.c F: lib/tests/module/ +F: rust/kernel/module_param.rs +F: rust/macros/module.rs F: scripts/module* F: tools/testing/selftests/kmod/ F: tools/testing/selftests/module/ @@ -17455,6 +17670,14 @@ S: Maintained F: Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml F: drivers/net/phy/motorcomm.c +MOTORCOMM YT921X ETHERNET SWITCH DRIVER +M: David Yang +L: netdev@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/net/dsa/motorcomm,yt921x.yaml +F: drivers/net/dsa/yt921x.* +F: net/dsa/tag_yt921x.c + MOXA SMARTIO/INDUSTIO/INTELLIO SERIAL CARD M: Jiri Slaby S: Maintained @@ -17468,6 +17691,16 @@ S: Maintained F: Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml F: drivers/video/backlight/mp3309c.c +MPAM DRIVER +M: James Morse +M: Ben Horgan +R: Reinette Chatre +R: Fenghua Yu +S: Maintained +F: drivers/resctrl/mpam_* +F: drivers/resctrl/test_mpam_* +F: include/linux/arm_mpam.h + MPS MP2869 DRIVER M: Wensheng Wang L: linux-hwmon@vger.kernel.org @@ -17482,6 +17715,13 @@ S: Maintained F: Documentation/hwmon/mp2891.rst F: drivers/hwmon/pmbus/mp2891.c +MPS MP2925 DRIVER +M: Noah Wang +L: linux-hwmon@vger.kernel.org +S: Maintained +F: Documentation/hwmon/mp2925.rst +F: drivers/hwmon/pmbus/mp2925.c + MPS MP29502 DRIVER M: Wensheng Wang L: linux-hwmon@vger.kernel.org @@ -17503,6 +17743,13 @@ S: Maintained F: Documentation/hwmon/mp9941.rst F: drivers/hwmon/pmbus/mp9941.c +MPS MP9945 DRIVER +M: Cosmo Chou +L: linux-hwmon@vger.kernel.org +S: Maintained +F: Documentation/hwmon/mp9945.rst +F: drivers/hwmon/pmbus/mp9945.c + MR800 AVERMEDIA USB FM RADIO DRIVER M: Alexey Klimov L: linux-media@vger.kernel.org @@ -17610,6 +17857,14 @@ T: git git://linuxtv.org/media.git F: Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml F: drivers/media/i2c/mt9v111.c +MUCSE ETHERNET DRIVER +M: Yibo Dong +L: netdev@vger.kernel.org +S: Maintained +W: https://www.mucse.com/en/ +F: Documentation/networking/device_drivers/ethernet/mucse/ +F: drivers/net/ethernet/mucse/ + MULTIFUNCTION DEVICES (MFD) M: Lee Jones S: Maintained @@ -17782,7 +18037,6 @@ F: drivers/net/ethernet/neterion/ NETFILTER M: Pablo Neira Ayuso -M: Jozsef Kadlecsik M: Florian Westphal R: Phil Sutter L: netfilter-devel@vger.kernel.org @@ -18034,7 +18288,7 @@ X: net/wireless/ X: tools/testing/selftests/net/can/ NETWORKING [IOAM] -M: Justin Iurman +M: Justin Iurman S: Maintained F: Documentation/networking/ioam6* F: include/linux/ioam6* @@ -18051,6 +18305,7 @@ L: netdev@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next.git +F: Documentation/networking/xfrm/ F: include/net/xfrm.h F: include/uapi/linux/xfrm.h F: net/ipv4/ah4.c @@ -18259,10 +18514,11 @@ F: net/sunrpc/ NILFS2 FILESYSTEM M: Ryusuke Konishi +M: Viacheslav Dubeyko L: linux-nilfs@vger.kernel.org -S: Supported +S: Maintained W: https://nilfs.sourceforge.io/ -T: git https://github.com/konis/nilfs2.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/vdubeyko/nilfs2.git F: Documentation/filesystems/nilfs2.rst F: fs/nilfs2/ F: include/trace/events/nilfs2.h @@ -18321,7 +18577,7 @@ NOHZ, DYNTICKS SUPPORT M: Anna-Maria Behnsen M: Frederic Weisbecker M: Ingo Molnar -M: Thomas Gleixner +M: Thomas Gleixner L: linux-kernel@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/nohz @@ -18452,6 +18708,13 @@ S: Maintained F: drivers/video/fbdev/nvidia/ F: drivers/video/fbdev/riva/ +NVIDIA VRS RTC DRIVER +M: Shubhi Garg +L: linux-tegra@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/rtc/nvidia,vrs-10.yaml +F: drivers/rtc/rtc-nvidia-vrs10.c + NVIDIA WMI EC BACKLIGHT DRIVER M: Daniel Dadap L: platform-driver-x86@vger.kernel.org @@ -18637,6 +18900,17 @@ S: Maintained F: Documentation/devicetree/bindings/regulator/nxp,pf5300.yaml F: drivers/regulator/pf530x-regulator.c +NXP PF1550 PMIC MFD DRIVER +M: Samuel Kayode +L: imx@lists.linux.dev +S: Maintained +F: Documentation/devicetree/bindings/mfd/nxp,pf1550.yaml +F: drivers/input/misc/pf1550-onkey.c +F: drivers/mfd/pf1550.c +F: drivers/power/supply/pf1550-charger.c +F: drivers/regulator/pf1550-regulator.c +F: include/linux/mfd/pf1550.h + NXP PF8100/PF8121A/PF8200 PMIC REGULATOR DEVICE DRIVER M: Jagan Teki S: Maintained @@ -18677,7 +18951,7 @@ NXP TFA9879 DRIVER M: Peter Rosin L: linux-sound@vger.kernel.org S: Maintained -F: Documentation/devicetree/bindings/sound/nxp,tfa9879.yaml +F: Documentation/devicetree/bindings/sound/trivial-codec.yaml F: sound/soc/codecs/tfa9879* NXP-NCI NFC DRIVER @@ -18755,7 +19029,7 @@ OCXL (Open Coherent Accelerator Processor Interface OpenCAPI) DRIVER M: Frederic Barrat M: Andrew Donnellan L: linuxppc-dev@lists.ozlabs.org -S: Supported +S: Odd Fixes F: Documentation/userspace-api/accelerators/ocxl.rst F: arch/powerpc/include/asm/pnv-ocxl.h F: arch/powerpc/platforms/powernv/ocxl.c @@ -19005,10 +19279,9 @@ T: git git://linuxtv.org/media.git F: drivers/media/i2c/ov08d10.c OMNIVISION OV08X40 SENSOR DRIVER -M: Jason Chen +M: Jimmy Su L: linux-media@vger.kernel.org S: Maintained -T: git git://linuxtv.org/media.git F: drivers/media/i2c/ov08x40.c F: Documentation/devicetree/bindings/media/i2c/ovti,ov08x40.yaml @@ -19101,7 +19374,7 @@ F: Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml F: drivers/media/i2c/ov5675.c OMNIVISION OV5693 SENSOR DRIVER -M: Daniel Scally +M: Daniel Scally L: linux-media@vger.kernel.org S: Maintained T: git git://linuxtv.org/media.git @@ -19279,7 +19552,7 @@ F: include/linux/oa_tc6.h OPEN FIRMWARE AND FLATTENED DEVICE TREE M: Rob Herring -M: Saravana Kannan +M: Saravana Kannan L: devicetree@vger.kernel.org S: Maintained Q: http://patchwork.kernel.org/project/devicetree/list/ @@ -19655,6 +19928,13 @@ S: Orphan F: Documentation/devicetree/bindings/pci/cdns,* F: drivers/pci/controller/cadence/*cadence* +PCI DRIVER FOR CIX Sky1 +M: Hans Zhang +L: linux-pci@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/pci/cix,sky1-pcie-*.yaml +F: drivers/pci/controller/cadence/*sky1* + PCI DRIVER FOR FREESCALE LAYERSCAPE M: Minghuan Lian M: Mingkai Hu @@ -19697,7 +19977,7 @@ F: Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml F: drivers/pci/controller/dwc/*imx6* PCI DRIVER FOR INTEL IXP4XX -M: Linus Walleij +M: Linus Walleij S: Maintained F: Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml F: drivers/pci/controller/pci-ixp4xx.c @@ -19808,7 +20088,7 @@ F: drivers/pci/controller/cadence/pci-j721e.c F: drivers/pci/controller/dwc/pci-dra7xx.c PCI DRIVER FOR V3 SEMICONDUCTOR V360EPC -M: Linus Walleij +M: Linus Walleij L: linux-pci@vger.kernel.org S: Maintained F: Documentation/devicetree/bindings/pci/v3,v360epc-pci.yaml @@ -19905,6 +20185,7 @@ F: include/linux/pci-p2pdma.h PCI POWER CONTROL M: Bartosz Golaszewski +M: Manivannan Sadhasivam L: linux-pci@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci.git @@ -19919,6 +20200,7 @@ Q: https://patchwork.kernel.org/project/linux-pci/list/ B: https://bugzilla.kernel.org C: irc://irc.oftc.net/linux-pci T: git git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci.git +F: Documentation/ABI/testing/sysfs-devices-pci-host-bridge F: Documentation/PCI/ F: Documentation/devicetree/bindings/pci/ F: arch/x86/kernel/early-quirks.c @@ -20041,6 +20323,14 @@ S: Maintained F: drivers/pci/controller/dwc/pcie-qcom-common.c F: drivers/pci/controller/dwc/pcie-qcom.c +PCIE DRIVER FOR RENESAS RZ/G3S SERIES +M: Claudiu Beznea +L: linux-pci@vger.kernel.org +L: linux-renesas-soc@vger.kernel.org +S: Supported +F: Documentation/devicetree/bindings/pci/renesas,r9a08g045-pcie.yaml +F: drivers/pci/controller/pcie-rzg3s-host.c + PCIE DRIVER FOR ROCKCHIP M: Shawn Lin L: linux-pci@vger.kernel.org @@ -20254,7 +20544,7 @@ K: (?i)clone3 K: \b(clone_args|kernel_clone_args)\b PIN CONTROL SUBSYSTEM -M: Linus Walleij +M: Linus Walleij L: linux-gpio@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git @@ -20472,7 +20762,7 @@ F: drivers/platform/x86/portwell-ec.c POSIX CLOCKS and TIMERS M: Anna-Maria Behnsen M: Frederic Weisbecker -M: Thomas Gleixner +M: Thomas Gleixner L: linux-kernel@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core @@ -20598,6 +20888,7 @@ R: John Ogness R: Sergey Senozhatsky S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux.git +F: Documentation/core-api/printk-basics.rst F: include/linux/printk.h F: kernel/printk/ @@ -20798,6 +21089,14 @@ F: include/linux/pwm.h F: include/linux/pwm_backlight.h K: pwm_(config|apply_might_sleep|apply_atomic|ops) +PWM SUBSYSTEM BINDINGS [RUST] +M: Michal Wilczynski +L: linux-pwm@vger.kernel.org +L: rust-for-linux@vger.kernel.org +S: Maintained +F: rust/helpers/pwm.c +F: rust/kernel/pwm.rs + PXA GPIO DRIVER M: Robert Jarzmik L: linux-gpio@vger.kernel.org @@ -21055,6 +21354,7 @@ F: Documentation/devicetree/bindings/net/qcom,bam-dmux.yaml F: drivers/net/wwan/qcom_bam_dmux.c QUALCOMM BLUETOOTH DRIVER +M: Bartosz Golaszewski L: linux-arm-msm@vger.kernel.org S: Maintained F: drivers/bluetooth/btqca.[ch] @@ -21640,8 +21940,12 @@ F: tools/testing/selftests/rtc/ Real-time Linux Analysis (RTLA) tools M: Steven Rostedt +M: Tomas Glozar L: linux-trace-kernel@vger.kernel.org +L: linux-kernel@vger.kernel.org S: Maintained +Q: https://patchwork.kernel.org/project/linux-trace-kernel/list/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace.git F: Documentation/tools/rtla/ F: tools/tracing/rtla/ @@ -21667,7 +21971,7 @@ F: Documentation/devicetree/bindings/watchdog/realtek,otto-wdt.yaml F: drivers/watchdog/realtek_otto_wdt.c REALTEK RTL83xx SMI DSA ROUTER CHIPS -M: Linus Walleij +M: Linus Walleij M: Alvin Šipraga S: Maintained F: Documentation/devicetree/bindings/net/dsa/realtek.yaml @@ -21679,6 +21983,11 @@ S: Maintained F: Documentation/devicetree/bindings/spi/realtek,rtl9301-snand.yaml F: drivers/spi/spi-realtek-rtl-snand.c +REALTEK SYSTIMER DRIVER +M: Hao-Wen Ting +S: Maintained +F: drivers/clocksource/timer-realtek.c + REALTEK WIRELESS DRIVER (rtlwifi family) M: Ping-Ke Shih L: linux-wireless@vger.kernel.org @@ -21889,6 +22198,14 @@ S: Supported F: Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml F: drivers/counter/rz-mtu3-cnt.c +RENESAS RZ/T2H / RZ/N2H A/D DRIVER +M: Cosmin Tanislav +L: linux-iio@vger.kernel.org +L: linux-renesas-soc@vger.kernel.org +S: Supported +F: Documentation/devicetree/bindings/iio/adc/renesas,r9a09g077-adc.yaml +F: drivers/iio/adc/rzt2h_adc.c + RENESAS RTCA-3 RTC DRIVER M: Claudiu Beznea L: linux-rtc@vger.kernel.org @@ -21910,6 +22227,13 @@ F: include/dt-bindings/net/pcs-rzn1-miic.h F: include/linux/pcs-rzn1-miic.h F: net/dsa/tag_rzn1_a5psw.c +RENESAS RZ/N1 ADC DRIVER +M: Herve Codina +L: linux-renesas-soc@vger.kernel.org +S: Supported +F: Documentation/devicetree/bindings/iio/adc/renesas,rzn1-adc.yaml +F: drivers/iio/adc/rzn1-adc.c + RENESAS RZ/N1 DWMAC GLUE LAYER M: Romain Gantois S: Maintained @@ -21940,6 +22264,13 @@ S: Maintained F: Documentation/devicetree/bindings/net/renesas,rzv2h-gbeth.yaml F: drivers/net/ethernet/stmicro/stmmac/dwmac-renesas-gbeth.c +RENESAS RZ/V2H(P) INPUT VIDEO CONTROL BLOCK DRIVER +M: Daniel Scally +L: linux-media@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/media/renesas,r9a09g057-ivc.yaml +F: drivers/media/platform/renesas/rzv2h-ivc/ + RENESAS RZ/V2H(P) RSPI DRIVER M: Fabrizio Castro L: linux-spi@vger.kernel.org @@ -22091,6 +22422,14 @@ F: Documentation/devicetree/bindings/riscv/andes.yaml F: Documentation/devicetree/bindings/timer/andestech,plmt0.yaml F: arch/riscv/boot/dts/andes/ +RISC-V ANLOGIC SoC SUPPORT +M: Conor Dooley +T: git https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/ +L: linux-riscv@lists.infradead.org +S: Odd Fixes +F: Documentation/devicetree/bindings/riscv/anlogic.yaml +F: arch/riscv/boot/dts/anlogic/ + RISC-V ARCHITECTURE M: Paul Walmsley M: Palmer Dabbelt @@ -22115,16 +22454,19 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux.git F: Documentation/devicetree/bindings/iommu/riscv,iommu.yaml F: drivers/iommu/riscv/ -RISC-V MICROCHIP FPGA SUPPORT +RISC-V MICROCHIP SUPPORT M: Conor Dooley M: Daire McNamara L: linux-riscv@lists.infradead.org S: Supported +T: git https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/ (dts, soc, firmware) F: Documentation/devicetree/bindings/clock/microchip,mpfs*.yaml F: Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml F: Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml F: Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml F: Documentation/devicetree/bindings/net/can/microchip,mpfs-can.yaml +F: Documentation/devicetree/bindings/pinctrl/microchip,mpfs-pinctrl-iomux0.yaml +F: Documentation/devicetree/bindings/pinctrl/microchip,pic64gx-pinctrl-gpio2.yaml F: Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml F: Documentation/devicetree/bindings/riscv/microchip.yaml F: Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml @@ -22138,25 +22480,26 @@ F: drivers/gpio/gpio-mpfs.c F: drivers/i2c/busses/i2c-microchip-corei2c.c F: drivers/mailbox/mailbox-mpfs.c F: drivers/pci/controller/plda/pcie-microchip-host.c +F: drivers/pinctrl/pinctrl-mpfs-iomux0.c +F: drivers/pinctrl/pinctrl-pic64gx-gpio2.c F: drivers/pwm/pwm-microchip-core.c F: drivers/reset/reset-mpfs.c F: drivers/rtc/rtc-mpfs.c +F: drivers/soc/microchip/mpfs-control-scb.c +F: drivers/soc/microchip/mpfs-mss-top-sysreg.c F: drivers/soc/microchip/mpfs-sys-controller.c F: drivers/spi/spi-microchip-core-qspi.c -F: drivers/spi/spi-microchip-core.c +F: drivers/spi/spi-mpfs.c F: drivers/usb/musb/mpfs.c F: include/soc/microchip/mpfs.h RISC-V MISC SOC SUPPORT M: Conor Dooley L: linux-riscv@lists.infradead.org -S: Maintained -Q: https://patchwork.kernel.org/project/linux-riscv/list/ +S: Odd Fixes T: git https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/ F: arch/riscv/boot/dts/canaan/ -F: arch/riscv/boot/dts/microchip/ F: arch/riscv/boot/dts/sifive/ -F: arch/riscv/boot/dts/starfive/ RISC-V PMU DRIVERS M: Atish Patra @@ -22194,6 +22537,15 @@ F: arch/riscv/boot/dts/spacemit/ N: spacemit K: spacemit +RISC-V TENSTORRENT SoC SUPPORT +M: Drew Fustini +M: Joel Stanley +L: linux-riscv@lists.infradead.org +S: Maintained +T: git https://github.com/tenstorrent/linux.git +F: Documentation/devicetree/bindings/riscv/tenstorrent.yaml +F: arch/riscv/boot/dts/tenstorrent/ + RISC-V THEAD SoC SUPPORT M: Drew Fustini M: Guo Ren @@ -22207,6 +22559,7 @@ F: Documentation/devicetree/bindings/firmware/thead,th1520-aon.yaml F: Documentation/devicetree/bindings/mailbox/thead,th1520-mbox.yaml F: Documentation/devicetree/bindings/net/thead,th1520-gmac.yaml F: Documentation/devicetree/bindings/pinctrl/thead,th1520-pinctrl.yaml +F: Documentation/devicetree/bindings/pwm/thead,th1520-pwm.yaml F: Documentation/devicetree/bindings/reset/thead,th1520-reset.yaml F: arch/riscv/boot/dts/thead/ F: drivers/clk/thead/clk-th1520-ap.c @@ -22217,6 +22570,7 @@ F: drivers/pinctrl/pinctrl-th1520.c F: drivers/pmdomain/thead/ F: drivers/power/reset/th1520-aon-reboot.c F: drivers/power/sequencing/pwrseq-thead-gpu.c +F: drivers/pwm/pwm_th1520.rs F: drivers/reset/reset-th1520.c F: include/dt-bindings/clock/thead,th1520-clk-ap.h F: include/dt-bindings/power/thead,th1520-power.h @@ -22246,6 +22600,16 @@ S: Maintained F: Documentation/devicetree/bindings/net/can/rockchip,rk3568v2-canfd.yaml F: drivers/net/can/rockchip/ +ROCKCHIP CAMERA INTERFACE (RKCIF) DRIVER +M: Mehdi Djait +M: Michael Riesch +L: linux-media@vger.kernel.org +S: Maintained +F: Documentation/admin-guide/media/rkcif* +F: Documentation/devicetree/bindings/media/rockchip,px30-vip.yaml +F: Documentation/devicetree/bindings/media/rockchip,rk3568-vicap.yaml +F: drivers/media/platform/rockchip/rkcif/ + ROCKCHIP CRYPTO DRIVERS M: Corentin Labbe L: linux-crypto@vger.kernel.org @@ -22325,6 +22689,12 @@ L: linux-serial@vger.kernel.org S: Odd Fixes F: drivers/tty/serial/rp2.* +ROHM BD71828 CHARGER +M: Andreas Kemnade +M: Matti Vaittinen +S: Maintained +F: drivers/power/supply/bd71828-charger.c + ROHM BD79703 DAC M: Matti Vaittinen S: Supported @@ -22504,11 +22874,11 @@ F: Documentation/trace/rv/ F: include/linux/rv.h F: include/rv/ F: kernel/trace/rv/ +F: tools/testing/selftests/verification/ F: tools/verification/ RUST M: Miguel Ojeda -M: Alex Gaynor R: Boqun Feng R: Gary Guo R: Björn Roy Baron @@ -22545,6 +22915,14 @@ T: git https://github.com/Rust-for-Linux/linux.git alloc-next F: rust/kernel/alloc.rs F: rust/kernel/alloc/ +RUST [NUM] +M: Alexandre Courbot +R: Yury Norov +L: rust-for-linux@vger.kernel.org +S: Maintained +F: rust/kernel/num.rs +F: rust/kernel/num/ + RUST [PIN-INIT] M: Benno Lossin L: rust-for-linux@vger.kernel.org @@ -22797,6 +23175,7 @@ L: linux-kernel@vger.kernel.org L: linux-samsung-soc@vger.kernel.org S: Supported F: Documentation/devicetree/bindings/firmware/google,gs101-acpm-ipc.yaml +F: drivers/clk/samsung/clk-acpm.c F: drivers/firmware/samsung/exynos-acpm* F: include/linux/firmware/samsung/exynos-acpm-protocol.h @@ -23077,6 +23456,7 @@ F: drivers/scsi/ F: drivers/ufs/ F: include/scsi/ F: include/uapi/scsi/ +F: include/ufs/ SCSI TAPE DRIVER M: Kai Mäkisara @@ -23416,7 +23796,7 @@ S: Supported F: net/smc/ SHARP GP2AP002A00F/GP2AP002S00F SENSOR DRIVER -M: Linus Walleij +M: Linus Walleij L: linux-iio@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git @@ -23867,7 +24247,7 @@ F: include/linux/property.h SOFTWARE RAID (Multiple Disks) SUPPORT M: Song Liu -M: Yu Kuai +M: Yu Kuai L: linux-raid@vger.kernel.org S: Supported Q: https://patchwork.kernel.org/project/linux-raid/list/ @@ -24200,7 +24580,7 @@ F: drivers/tty/vcc.c F: include/linux/sunserialcore.h SPARSE CHECKER -M: "Luc Van Oostenryck" +M: Chris Li L: linux-sparse@vger.kernel.org S: Maintained W: https://sparse.docs.kernel.org/ @@ -24262,6 +24642,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git F: Documentation/devicetree/bindings/spi/ F: Documentation/spi/ F: drivers/spi/ +F: include/trace/events/spi* F: include/linux/spi/ F: include/uapi/linux/spi/ F: tools/spi/ @@ -24369,6 +24750,14 @@ S: Maintained F: Documentation/hwmon/stpddc60.rst F: drivers/hwmon/pmbus/stpddc60.c +ST TSC1641 DRIVER +M: Igor Reznichenko +L: linux-hwmon@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/hwmon/st,tsc1641.yaml +F: Documentation/hwmon/tsc1641.rst +F: drivers/hwmon/tsc1641.c + ST VD55G1 DRIVER M: Benjamin Mugnier M: Sylvain Petinot @@ -24453,10 +24842,13 @@ F: drivers/staging/ STANDALONE CACHE CONTROLLER DRIVERS M: Conor Dooley +M: Jonathan Cameron S: Maintained T: git https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/ F: Documentation/devicetree/bindings/cache/ F: drivers/cache +F: include/linux/cache_coherency.h +F: lib/cache_maint.c STARFIRE/DURALAN NETWORK DRIVER M: Ion Badulescu @@ -24481,7 +24873,10 @@ F: drivers/crypto/starfive/ STARFIVE DEVICETREES M: Emil Renner Berthing +M: Conor Dooley +L: linux-riscv@lists.infradead.org S: Maintained +T: git https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/ F: arch/riscv/boot/dts/starfive/ STARFIVE DWMAC GLUE LAYER @@ -24830,7 +25225,6 @@ F: drivers/regulator/sy8106a-regulator.c SYNC FILE FRAMEWORK M: Sumit Semwal -R: Gustavo Padovan L: linux-media@vger.kernel.org L: dri-devel@lists.freedesktop.org S: Maintained @@ -24930,7 +25324,7 @@ F: drivers/net/pcs/pcs-xpcs.h F: include/linux/pcs/pcs-xpcs.h SYNOPSYS DESIGNWARE HDMI RX CONTROLLER DRIVER -M: Shreeya Patel +M: Dmitry Osipenko L: linux-media@vger.kernel.org L: kernel@collabora.com S: Maintained @@ -24955,6 +25349,7 @@ F: include/linux/soc/amd/isp4_misc.h SYNOPSYS DESIGNWARE MMC/SD/SDIO DRIVER M: Jaehoon Chung +M: Shawn Lin L: linux-mmc@vger.kernel.org S: Maintained F: drivers/mmc/host/dw_mmc* @@ -25123,7 +25518,7 @@ L: linux-media@vger.kernel.org S: Maintained W: https://linuxtv.org Q: http://patchwork.linuxtv.org/project/linux-media/list/ -F: Documentation/devicetree/bindings/media/i2c/nxp,tda1997x.txt +F: Documentation/devicetree/bindings/media/i2c/nxp,tda19971.yaml F: drivers/media/i2c/tda1997x.* TDA827x MEDIA DRIVER @@ -25878,7 +26273,7 @@ F: drivers/net/wireless/ti/ TIMEKEEPING, CLOCKSOURCE CORE, NTP, ALARMTIMER M: John Stultz -M: Thomas Gleixner +M: Thomas Gleixner R: Stephen Boyd L: linux-kernel@vger.kernel.org S: Supported @@ -26034,7 +26429,7 @@ M: Jarkko Sakkinen R: Jason Gunthorpe L: linux-integrity@vger.kernel.org S: Maintained -W: https://codeberg.org/jarkko/linux-tpmdd-test +W: https://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd-test.git/about/ Q: https://patchwork.kernel.org/project/linux-integrity/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd.git F: Documentation/devicetree/bindings/tpm/ @@ -26077,6 +26472,7 @@ L: linux-trace-kernel@vger.kernel.org S: Maintained Q: https://patchwork.kernel.org/project/linux-trace-kernel/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace.git +F: Documentation/core-api/tracepoint.rst F: Documentation/trace/* F: fs/tracefs/ F: include/linux/trace*.h @@ -26084,6 +26480,7 @@ F: include/trace/ F: kernel/trace/ F: kernel/tracepoint.c F: scripts/tracing/ +F: scripts/tracepoint-update.c F: tools/testing/selftests/ftrace/ TRACING MMIO ACCESSES (MMIOTRACE) @@ -26124,14 +26521,16 @@ M: David Lechner S: Maintained F: Documentation/devicetree/bindings/trigger-source/* -TRUSTED SECURITY MODULE (TSM) INFRASTRUCTURE +TRUSTED EXECUTION ENVIRONMENT SECURITY MANAGER (TSM) M: Dan Williams L: linux-coco@lists.linux.dev S: Maintained F: Documentation/ABI/testing/configfs-tsm-report F: Documentation/driver-api/coco/ +F: Documentation/driver-api/pci/tsm.rst +F: drivers/pci/tsm.c F: drivers/virt/coco/guest/ -F: include/linux/tsm*.h +F: include/linux/*tsm*.h F: samples/tsm-mr/ TRUSTED SERVICES TEE DRIVER @@ -26376,6 +26775,14 @@ S: Supported F: Documentation/devicetree/bindings/ufs/ F: Documentation/scsi/ufs.rst F: drivers/ufs/core/ +F: include/ufs/ + +UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER AMD VERSAL2 +M: Sai Krishna Potthuri +M: Ajay Neeli +S: Maintained +F: Documentation/devicetree/bindings/ufs/amd,versal2-ufs.yaml +F: drivers/ufs/host/ufs-amd-versal2.c UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER DWC HOOKS M: Pedro Sousa @@ -26393,6 +26800,7 @@ F: drivers/ufs/host/ufs-exynos* UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER MEDIATEK HOOKS M: Peter Wang +M: Chaotian Jing R: Stanley Jhu L: linux-scsi@vger.kernel.org L: linux-mediatek@lists.infradead.org (moderated for non-subscribers) @@ -26414,6 +26822,17 @@ L: linux-scsi@vger.kernel.org S: Maintained F: drivers/ufs/host/ufs-renesas.c +UNIWILL LAPTOP DRIVER +M: Armin Wolf +L: platform-driver-x86@vger.kernel.org +S: Maintained +F: Documentation/ABI/testing/sysfs-driver-uniwill-laptop +F: Documentation/admin-guide/laptops/uniwill-laptop.rst +F: Documentation/wmi/devices/uniwill-laptop.rst +F: drivers/platform/x86/uniwill/uniwill-acpi.c +F: drivers/platform/x86/uniwill/uniwill-wmi.c +F: drivers/platform/x86/uniwill/uniwill-wmi.h + UNSORTED BLOCK IMAGES (UBI) M: Richard Weinberger R: Zhihao Cheng @@ -26891,6 +27310,16 @@ F: drivers/media/i2c/vd55g1.c F: drivers/media/i2c/vd56g3.c F: drivers/media/i2c/vgxy61.c +V4L2 GENERIC ISP PARAMETERS AND STATISTIC FORMATS +M: Jacopo Mondi +L: linux-media@vger.kernel.org +S: Maintained +F: Documentation/driver-api/media/v4l2-isp.rst +F: Documentation/userspace-api/media/v4l/v4l2-isp.rst +F: drivers/media/v4l2-core/v4l2-isp.c +F: include/media/v4l2-isp.h +F: include/uapi/linux/media/v4l2-isp.h + VF610 NAND DRIVER M: Stefan Agner L: linux-mtd@lists.infradead.org @@ -27002,6 +27431,13 @@ L: virtualization@lists.linux.dev S: Maintained F: drivers/vfio/pci/virtio +VFIO XE PCI DRIVER +M: Michał Winiarski +L: kvm@vger.kernel.org +L: intel-xe@lists.freedesktop.org +S: Supported +F: drivers/vfio/pci/xe + VGA_SWITCHEROO R: Lukas Wunner S: Maintained @@ -27166,6 +27602,7 @@ F: arch/s390/include/uapi/asm/virtio-ccw.h F: drivers/s390/virtio/ VIRTIO FILE SYSTEM +M: German Maglione M: Vivek Goyal M: Stefan Hajnoczi M: Miklos Szeredi @@ -27242,7 +27679,7 @@ F: drivers/virtio/virtio_input.c F: include/uapi/linux/virtio_input.h VIRTIO IOMMU DRIVER -M: Jean-Philippe Brucker +M: Jean-Philippe Brucker L: virtualization@lists.linux.dev S: Maintained F: drivers/iommu/virtio-iommu.c @@ -27492,6 +27929,7 @@ F: drivers/regulator/ F: rust/kernel/regulator.rs F: include/dt-bindings/regulator/ F: include/linux/regulator/ +F: include/uapi/regulator/ K: regulator_get_optional VOLTAGE AND CURRENT REGULATOR IRQ HELPERS @@ -27659,6 +28097,7 @@ M: Jason A. Donenfeld L: wireguard@lists.zx2c4.com L: netdev@vger.kernel.org S: Maintained +F: Documentation/netlink/specs/wireguard.yaml F: drivers/net/wireguard/ F: tools/testing/selftests/wireguard/ @@ -27685,6 +28124,7 @@ F: Documentation/devicetree/bindings/extcon/wlf,arizona.yaml F: Documentation/devicetree/bindings/mfd/wlf,arizona.yaml F: Documentation/devicetree/bindings/mfd/wm831x.txt F: Documentation/devicetree/bindings/regulator/wlf,arizona.yaml +F: Documentation/devicetree/bindings/sound/trivial-codec.yaml F: Documentation/devicetree/bindings/sound/wlf,*.yaml F: Documentation/devicetree/bindings/sound/wm* F: Documentation/hwmon/wm83??.rst @@ -27744,7 +28184,7 @@ F: drivers/acpi/pmic/intel_pmic_xpower.c N: axp288 X-POWERS MULTIFUNCTION PMIC DEVICE DRIVERS -M: Chen-Yu Tsai +M: Chen-Yu Tsai L: linux-kernel@vger.kernel.org S: Maintained N: axp[128] @@ -27764,7 +28204,7 @@ F: net/lapb/ F: net/x25/ X86 ARCHITECTURE (32-BIT AND 64-BIT) -M: Thomas Gleixner +M: Thomas Gleixner M: Ingo Molnar M: Borislav Petkov M: Dave Hansen @@ -27780,7 +28220,7 @@ F: tools/testing/selftests/x86 X86 CPUID DATABASE M: Borislav Petkov -M: Thomas Gleixner +M: Thomas Gleixner M: x86@kernel.org R: Ahmed S. Darwish L: x86-cpuid@lists.linux.dev @@ -27796,7 +28236,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/asm F: arch/x86/entry/ X86 HARDWARE VULNERABILITIES -M: Thomas Gleixner +M: Thomas Gleixner M: Borislav Petkov M: Peter Zijlstra M: Josh Poimboeuf @@ -27891,6 +28331,7 @@ M: Matthew Wilcox L: linux-fsdevel@vger.kernel.org L: linux-mm@kvack.org S: Supported +F: Documentation/core-api/idr.rst F: Documentation/core-api/xarray.rst F: include/linux/idr.h F: include/linux/xarray.h @@ -28328,6 +28769,13 @@ L: linux-kernel@vger.kernel.org S: Maintained F: arch/x86/kernel/cpu/zhaoxin.c +ZONED BLOCK DEVICE (BLOCK LAYER) +M: Damien Le Moal +L: linux-block@vger.kernel.org +S: Maintained +F: block/blk-zoned.c +F: include/uapi/linux/blkzoned.h + ZONED LOOP DEVICE M: Damien Le Moal R: Christoph Hellwig diff --git a/Makefile b/Makefile index a082a1d7c7d9b4..9d38125263fb09 100644 --- a/Makefile +++ b/Makefile @@ -1,8 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 VERSION = 6 -PATCHLEVEL = 18 +PATCHLEVEL = 19 SUBLEVEL = 0 -EXTRAVERSION = +EXTRAVERSION = -rc5 NAME = Baby Opossum Posse # *DOCUMENTATION* @@ -810,6 +810,25 @@ ifdef CONFIG_FUNCTION_TRACER CC_FLAGS_FTRACE := -pg endif +ifdef CONFIG_TRACEPOINTS +# To check for unused tracepoints (tracepoints that are defined but never +# called), run with: +# +# make UT=1 +# +# Each unused tracepoints can take up to 5KB of memory in the running kernel. +# It is best to remove any that are not used. +# +# This command line option will be removed when all current unused +# tracepoints are removed. + +ifeq ("$(origin UT)", "command line") + WARN_ON_UNUSED_TRACEPOINTS := $(UT) +endif +endif # CONFIG_TRACEPOINTS + +export WARN_ON_UNUSED_TRACEPOINTS + include $(srctree)/arch/$(SRCARCH)/Makefile ifdef need-config @@ -940,6 +959,9 @@ KBUILD_CFLAGS += $(call cc-option,-fzero-init-padding-bits=all) # for the randomize_kstack_offset feature. Disable it for all compilers. KBUILD_CFLAGS += $(call cc-option, -fno-stack-clash-protection) +# Get details on warnings generated due to GCC value tracking. +KBUILD_CFLAGS += $(call cc-option, -fdiagnostics-show-context=2) + # Clear used registers at func exit (to reduce data lifetime and ROP gadgets). ifdef CONFIG_ZERO_CALL_USED_REGS KBUILD_CFLAGS += -fzero-call-used-regs=used-gpr @@ -1061,6 +1083,9 @@ NOSTDINC_FLAGS += -nostdinc # perform bounds checking. KBUILD_CFLAGS += $(call cc-option, -fstrict-flex-arrays=3) +# Allow including a tagged struct or union anonymously in another struct/union. +KBUILD_CFLAGS += -fms-extensions + # disable invalid "can't wrap" optimizations for signed / pointers KBUILD_CFLAGS += -fno-strict-overflow @@ -1081,7 +1106,7 @@ KBUILD_CPPFLAGS += $(call cc-option,-fmacro-prefix-map=$(srcroot)/=) endif # include additional Makefiles when needed -include-y := scripts/Makefile.extrawarn +include-y := scripts/Makefile.warn include-$(CONFIG_DEBUG_INFO) += scripts/Makefile.debug include-$(CONFIG_DEBUG_INFO_BTF)+= scripts/Makefile.btf include-$(CONFIG_KASAN) += scripts/Makefile.kasan @@ -1134,8 +1159,17 @@ ifneq ($(CONFIG_ARCH_VMLINUX_NEEDS_RELOCS),) LDFLAGS_vmlinux += --emit-relocs --discard-none endif -# Align the bit size of userspace programs with the kernel -USERFLAGS_FROM_KERNEL := -m32 -m64 --target=% +# Align the architecture of userspace programs with the kernel +USERFLAGS_FROM_KERNEL := --target=% + +ifdef CONFIG_ARCH_USERFLAGS +KBUILD_USERCFLAGS += $(CONFIG_ARCH_USERFLAGS) +KBUILD_USERLDFLAGS += $(CONFIG_ARCH_USERFLAGS) +else +# If not overridden also inherit the bit size +USERFLAGS_FROM_KERNEL += -m32 -m64 +endif + KBUILD_USERCFLAGS += $(filter $(USERFLAGS_FROM_KERNEL), $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS)) KBUILD_USERLDFLAGS += $(filter $(USERFLAGS_FROM_KERNEL), $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS)) @@ -1772,6 +1806,8 @@ help: @echo ' c: extra checks in the configuration stage (Kconfig)' @echo ' e: warnings are being treated as errors' @echo ' Multiple levels can be combined with W=12 or W=123' + @echo ' make UT=1 [targets] Warn if a tracepoint is defined but not used.' + @echo ' [ This will be removed when all current unused tracepoints are eliminated. ]' @$(if $(dtstree), \ echo ' make CHECK_DTBS=1 [targets] Check all generated dtb files against schema'; \ echo ' This can be applied both to "dtbs" and to individual "foo.dtb" targets' ; \ @@ -1797,9 +1833,10 @@ $(help-board-dirs): help-%: # Documentation targets # --------------------------------------------------------------------------- -DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs htmldocs-redirects \ - epubdocs cleandocs linkcheckdocs dochelp refcheckdocs \ - texinfodocs infodocs +DOC_TARGETS := xmldocs latexdocs pdfdocs htmldocs epubdocs cleandocs \ + linkcheckdocs dochelp refcheckdocs texinfodocs infodocs mandocs \ + htmldocs-redirects + PHONY += $(DOC_TARGETS) $(DOC_TARGETS): $(Q)$(MAKE) $(build)=Documentation $@ @@ -1826,10 +1863,17 @@ rusttest: prepare $(Q)$(MAKE) $(build)=rust $@ # Formatting targets +# +# Generated files as well as vendored crates are skipped. PHONY += rustfmt rustfmtcheck rustfmt: $(Q)find $(srctree) $(RCS_FIND_IGNORE) \ + \( \ + -path $(srctree)/rust/proc-macro2 \ + -o -path $(srctree)/rust/quote \ + -o -path $(srctree)/rust/syn \ + \) -prune -o \ -type f -a -name '*.rs' -a ! -name '*generated*' -print \ | xargs $(RUSTFMT) $(rustfmt_flags) diff --git a/README b/README index fd903645e6de06..a9fc263ccd711e 100644 --- a/README +++ b/README @@ -1,18 +1,156 @@ Linux kernel ============ -There are several guides for kernel developers and users. These guides can -be rendered in a number of formats, like HTML and PDF. Please read -Documentation/admin-guide/README.rst first. +The Linux kernel is the core of any Linux operating system. It manages hardware, +system resources, and provides the fundamental services for all other software. -In order to build the documentation, use ``make htmldocs`` or -``make pdfdocs``. The formatted documentation can also be read online at: +Quick Start +----------- - https://www.kernel.org/doc/html/latest/ +* Report a bug: See Documentation/admin-guide/reporting-issues.rst +* Get the latest kernel: https://kernel.org +* Build the kernel: See Documentation/admin-guide/quickly-build-trimmed-linux.rst +* Join the community: https://lore.kernel.org/ -There are various text files in the Documentation/ subdirectory, -several of them using the reStructuredText markup notation. +Essential Documentation +----------------------- -Please read the Documentation/process/changes.rst file, as it contains the -requirements for building and running the kernel, and information about -the problems which may result by upgrading your kernel. +All users should be familiar with: + +* Building requirements: Documentation/process/changes.rst +* Code of Conduct: Documentation/process/code-of-conduct.rst +* License: See COPYING + +Documentation can be built with make htmldocs or viewed online at: +https://www.kernel.org/doc/html/latest/ + + +Who Are You? +============ + +Find your role below: + +* New Kernel Developer - Getting started with kernel development +* Academic Researcher - Studying kernel internals and architecture +* Security Expert - Hardening and vulnerability analysis +* Backport/Maintenance Engineer - Maintaining stable kernels +* System Administrator - Configuring and troubleshooting +* Maintainer - Leading subsystems and reviewing patches +* Hardware Vendor - Writing drivers for new hardware +* Distribution Maintainer - Packaging kernels for distros + + +For Specific Users +================== + +New Kernel Developer +-------------------- + +Welcome! Start your kernel development journey here: + +* Getting Started: Documentation/process/development-process.rst +* Your First Patch: Documentation/process/submitting-patches.rst +* Coding Style: Documentation/process/coding-style.rst +* Build System: Documentation/kbuild/index.rst +* Development Tools: Documentation/dev-tools/index.rst +* Kernel Hacking Guide: Documentation/kernel-hacking/hacking.rst +* Core APIs: Documentation/core-api/index.rst + +Academic Researcher +------------------- + +Explore the kernel's architecture and internals: + +* Researcher Guidelines: Documentation/process/researcher-guidelines.rst +* Memory Management: Documentation/mm/index.rst +* Scheduler: Documentation/scheduler/index.rst +* Networking Stack: Documentation/networking/index.rst +* Filesystems: Documentation/filesystems/index.rst +* RCU (Read-Copy Update): Documentation/RCU/index.rst +* Locking Primitives: Documentation/locking/index.rst +* Power Management: Documentation/power/index.rst + +Security Expert +--------------- + +Security documentation and hardening guides: + +* Security Documentation: Documentation/security/index.rst +* LSM Development: Documentation/security/lsm-development.rst +* Self Protection: Documentation/security/self-protection.rst +* Reporting Vulnerabilities: Documentation/process/security-bugs.rst +* CVE Procedures: Documentation/process/cve.rst +* Embargoed Hardware Issues: Documentation/process/embargoed-hardware-issues.rst +* Security Features: Documentation/userspace-api/seccomp_filter.rst + +Backport/Maintenance Engineer +----------------------------- + +Maintain and stabilize kernel versions: + +* Stable Kernel Rules: Documentation/process/stable-kernel-rules.rst +* Backporting Guide: Documentation/process/backporting.rst +* Applying Patches: Documentation/process/applying-patches.rst +* Subsystem Profile: Documentation/maintainer/maintainer-entry-profile.rst +* Git for Maintainers: Documentation/maintainer/configure-git.rst + +System Administrator +-------------------- + +Configure, tune, and troubleshoot Linux systems: + +* Admin Guide: Documentation/admin-guide/index.rst +* Kernel Parameters: Documentation/admin-guide/kernel-parameters.rst +* Sysctl Tuning: Documentation/admin-guide/sysctl/index.rst +* Tracing/Debugging: Documentation/trace/index.rst +* Performance Security: Documentation/admin-guide/perf-security.rst +* Hardware Monitoring: Documentation/hwmon/index.rst + +Maintainer +---------- + +Lead kernel subsystems and manage contributions: + +* Maintainer Handbook: Documentation/maintainer/index.rst +* Pull Requests: Documentation/maintainer/pull-requests.rst +* Managing Patches: Documentation/maintainer/modifying-patches.rst +* Rebasing and Merging: Documentation/maintainer/rebasing-and-merging.rst +* Development Process: Documentation/process/maintainer-handbooks.rst +* Maintainer Entry Profile: Documentation/maintainer/maintainer-entry-profile.rst +* Git Configuration: Documentation/maintainer/configure-git.rst + +Hardware Vendor +--------------- + +Write drivers and support new hardware: + +* Driver API Guide: Documentation/driver-api/index.rst +* Driver Model: Documentation/driver-api/driver-model/driver.rst +* Device Drivers: Documentation/driver-api/infrastructure.rst +* Bus Types: Documentation/driver-api/driver-model/bus.rst +* Device Tree Bindings: Documentation/devicetree/bindings/ +* Power Management: Documentation/driver-api/pm/index.rst +* DMA API: Documentation/core-api/dma-api.rst + +Distribution Maintainer +----------------------- + +Package and distribute the kernel: + +* Stable Kernel Rules: Documentation/process/stable-kernel-rules.rst +* ABI Documentation: Documentation/ABI/README +* Kernel Configuration: Documentation/kbuild/kconfig.rst +* Module Signing: Documentation/admin-guide/module-signing.rst +* Kernel Parameters: Documentation/admin-guide/kernel-parameters.rst +* Tainted Kernels: Documentation/admin-guide/tainted-kernels.rst + + + +Communication and Support +========================= + +* Mailing Lists: https://lore.kernel.org/ +* IRC: #kernelnewbies on irc.oftc.net +* Bugzilla: https://bugzilla.kernel.org/ +* MAINTAINERS file: Lists subsystem maintainers and mailing lists +* Email Clients: Documentation/process/email-clients.rst diff --git a/arch/Kconfig b/arch/Kconfig index 61130b88964b94..31220f512b16d5 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -232,17 +232,14 @@ config HAVE_EFFICIENT_UNALIGNED_ACCESS config ARCH_USE_BUILTIN_BSWAP bool help - Modern versions of GCC (since 4.4) have builtin functions - for handling byte-swapping. Using these, instead of the old - inline assembler that the architecture code provides in the - __arch_bswapXX() macros, allows the compiler to see what's - happening and offers more opportunity for optimisation. In - particular, the compiler will be able to combine the byteswap - with a nearby load or store and use load-and-swap or - store-and-swap instructions if the architecture has them. It - should almost *never* result in code which is worse than the - hand-coded assembler in . But just in case it - does, the use of the builtins is optional. + GCC and Clang have builtin functions for handling byte-swapping. + Using these allows the compiler to see what's happening and + offers more opportunity for optimisation. In particular, the + compiler will be able to combine the byteswap with a nearby load + or store and use load-and-swap or store-and-swap instructions if + the architecture has them. It should almost *never* result in code + which is worse than the hand-coded assembler in . + But just in case it does, the use of the builtins is optional. Any architecture with load-and-swap or store-and-swap instructions should set this. And it shouldn't hurt to set it diff --git a/arch/alpha/include/asm/console.h b/arch/alpha/include/asm/console.h index 088b7b9eb15ae1..1cabdb6064bbe5 100644 --- a/arch/alpha/include/asm/console.h +++ b/arch/alpha/include/asm/console.h @@ -4,7 +4,7 @@ #include -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__ extern long callback_puts(long unit, const char *s, long length); extern long callback_getc(long unit); extern long callback_open_console(void); @@ -26,5 +26,5 @@ struct crb_struct; struct hwrpb_struct; extern int callback_init_done; extern void * callback_init(void *); -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* __AXP_CONSOLE_H */ diff --git a/arch/alpha/include/asm/page.h b/arch/alpha/include/asm/page.h index 5ec4c77e432e0e..d2c6667d73e9ee 100644 --- a/arch/alpha/include/asm/page.h +++ b/arch/alpha/include/asm/page.h @@ -6,7 +6,7 @@ #include #include -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__ #define STRICT_MM_TYPECHECKS @@ -74,7 +74,7 @@ typedef struct page *pgtable_t; #define PAGE_OFFSET 0xfffffc0000000000 #endif -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #define __pa(x) ((unsigned long) (x) - PAGE_OFFSET) #define __va(x) ((void *)((unsigned long) (x) + PAGE_OFFSET)) diff --git a/arch/alpha/include/asm/pal.h b/arch/alpha/include/asm/pal.h index db2b3b18b34c70..799a64c051984b 100644 --- a/arch/alpha/include/asm/pal.h +++ b/arch/alpha/include/asm/pal.h @@ -4,7 +4,7 @@ #include -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__ extern void halt(void) __attribute__((noreturn)); #define __halt() __asm__ __volatile__ ("call_pal %0 #halt" : : "i" (PAL_halt)) @@ -183,5 +183,5 @@ qemu_get_vmtime(void) return v0; } -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #endif /* __ALPHA_PAL_H */ diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h index 4a4d00b37986e5..98ccbca64984c0 100644 --- a/arch/alpha/include/asm/thread_info.h +++ b/arch/alpha/include/asm/thread_info.h @@ -4,14 +4,14 @@ #ifdef __KERNEL__ -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__ #include #include #include #include #endif -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__ struct thread_info { struct pcb_struct pcb; /* palcode state */ @@ -44,7 +44,7 @@ register struct thread_info *__current_thread_info __asm__("$8"); register unsigned long *current_stack_pointer __asm__ ("$30"); -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ /* Thread information allocation. */ #define THREAD_SIZE_ORDER 1 @@ -110,7 +110,7 @@ register unsigned long *current_stack_pointer __asm__ ("$30"); put_user(res, (int __user *)(value)); \ }) -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__ extern void __save_fpu(void); static inline void save_fpu(void) diff --git a/arch/alpha/include/uapi/asm/ioctls.h b/arch/alpha/include/uapi/asm/ioctls.h index 971311605288fa..a09d04b49cc658 100644 --- a/arch/alpha/include/uapi/asm/ioctls.h +++ b/arch/alpha/include/uapi/asm/ioctls.h @@ -23,10 +23,10 @@ #define TCSETSW _IOW('t', 21, struct termios) #define TCSETSF _IOW('t', 22, struct termios) -#define TCGETA _IOR('t', 23, struct termio) -#define TCSETA _IOW('t', 24, struct termio) -#define TCSETAW _IOW('t', 25, struct termio) -#define TCSETAF _IOW('t', 28, struct termio) +#define TCGETA 0x40127417 +#define TCSETA 0x80127418 +#define TCSETAW 0x80127419 +#define TCSETAF 0x8012741c #define TCSBRK _IO('t', 29) #define TCXONC _IO('t', 30) diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c index dc91de50f906dc..955b6ca616276a 100644 --- a/arch/alpha/kernel/pci_iommu.c +++ b/arch/alpha/kernel/pci_iommu.c @@ -224,28 +224,26 @@ static int pci_dac_dma_supported(struct pci_dev *dev, u64 mask) until either pci_unmap_single or pci_dma_sync_single is performed. */ static dma_addr_t -pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size, +pci_map_single_1(struct pci_dev *pdev, phys_addr_t paddr, size_t size, int dac_allowed) { struct pci_controller *hose = pdev ? pdev->sysdata : pci_isa_hose; dma_addr_t max_dma = pdev ? pdev->dma_mask : ISA_DMA_MASK; + unsigned long offset = offset_in_page(paddr); struct pci_iommu_arena *arena; long npages, dma_ofs, i; - unsigned long paddr; dma_addr_t ret; unsigned int align = 0; struct device *dev = pdev ? &pdev->dev : NULL; - paddr = __pa(cpu_addr); - #if !DEBUG_NODIRECT /* First check to see if we can use the direct map window. */ if (paddr + size + __direct_map_base - 1 <= max_dma && paddr + size <= __direct_map_size) { ret = paddr + __direct_map_base; - DBGA2("pci_map_single: [%p,%zx] -> direct %llx from %ps\n", - cpu_addr, size, ret, __builtin_return_address(0)); + DBGA2("pci_map_single: [%pa,%zx] -> direct %llx from %ps\n", + &paddr, size, ret, __builtin_return_address(0)); return ret; } @@ -255,8 +253,8 @@ pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size, if (dac_allowed) { ret = paddr + alpha_mv.pci_dac_offset; - DBGA2("pci_map_single: [%p,%zx] -> DAC %llx from %ps\n", - cpu_addr, size, ret, __builtin_return_address(0)); + DBGA2("pci_map_single: [%pa,%zx] -> DAC %llx from %ps\n", + &paddr, size, ret, __builtin_return_address(0)); return ret; } @@ -290,10 +288,10 @@ pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size, arena->ptes[i + dma_ofs] = mk_iommu_pte(paddr); ret = arena->dma_base + dma_ofs * PAGE_SIZE; - ret += (unsigned long)cpu_addr & ~PAGE_MASK; + ret += offset; - DBGA2("pci_map_single: [%p,%zx] np %ld -> sg %llx from %ps\n", - cpu_addr, size, npages, ret, __builtin_return_address(0)); + DBGA2("pci_map_single: [%pa,%zx] np %ld -> sg %llx from %ps\n", + &paddr, size, npages, ret, __builtin_return_address(0)); return ret; } @@ -322,19 +320,18 @@ static struct pci_dev *alpha_gendev_to_pci(struct device *dev) return NULL; } -static dma_addr_t alpha_pci_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction dir, +static dma_addr_t alpha_pci_map_phys(struct device *dev, phys_addr_t phys, + size_t size, enum dma_data_direction dir, unsigned long attrs) { struct pci_dev *pdev = alpha_gendev_to_pci(dev); int dac_allowed; - BUG_ON(dir == DMA_NONE); + if (unlikely(attrs & DMA_ATTR_MMIO)) + return DMA_MAPPING_ERROR; - dac_allowed = pdev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0; - return pci_map_single_1(pdev, (char *)page_address(page) + offset, - size, dac_allowed); + dac_allowed = pdev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0; + return pci_map_single_1(pdev, phys, size, dac_allowed); } /* Unmap a single streaming mode DMA translation. The DMA_ADDR and @@ -343,7 +340,7 @@ static dma_addr_t alpha_pci_map_page(struct device *dev, struct page *page, the cpu to the buffer are guaranteed to see whatever the device wrote there. */ -static void alpha_pci_unmap_page(struct device *dev, dma_addr_t dma_addr, +static void alpha_pci_unmap_phys(struct device *dev, dma_addr_t dma_addr, size_t size, enum dma_data_direction dir, unsigned long attrs) { @@ -353,8 +350,6 @@ static void alpha_pci_unmap_page(struct device *dev, dma_addr_t dma_addr, struct pci_iommu_arena *arena; long dma_ofs, npages; - BUG_ON(dir == DMA_NONE); - if (dma_addr >= __direct_map_base && dma_addr < __direct_map_base + __direct_map_size) { /* Nothing to do. */ @@ -429,7 +424,7 @@ static void *alpha_pci_alloc_coherent(struct device *dev, size_t size, } memset(cpu_addr, 0, size); - *dma_addrp = pci_map_single_1(pdev, cpu_addr, size, 0); + *dma_addrp = pci_map_single_1(pdev, virt_to_phys(cpu_addr), size, 0); if (*dma_addrp == DMA_MAPPING_ERROR) { free_pages((unsigned long)cpu_addr, order); if (alpha_mv.mv_pci_tbi || (gfp & GFP_DMA)) @@ -643,9 +638,8 @@ static int alpha_pci_map_sg(struct device *dev, struct scatterlist *sg, /* Fast path single entry scatterlists. */ if (nents == 1) { sg->dma_length = sg->length; - sg->dma_address - = pci_map_single_1(pdev, SG_ENT_VIRT_ADDRESS(sg), - sg->length, dac_allowed); + sg->dma_address = pci_map_single_1(pdev, sg_phys(sg), + sg->length, dac_allowed); if (sg->dma_address == DMA_MAPPING_ERROR) return -EIO; return 1; @@ -917,8 +911,8 @@ iommu_unbind(struct pci_iommu_arena *arena, long pg_start, long pg_count) const struct dma_map_ops alpha_pci_ops = { .alloc = alpha_pci_alloc_coherent, .free = alpha_pci_free_coherent, - .map_page = alpha_pci_map_page, - .unmap_page = alpha_pci_unmap_page, + .map_phys = alpha_pci_map_phys, + .unmap_phys = alpha_pci_unmap_phys, .map_sg = alpha_pci_map_sg, .unmap_sg = alpha_pci_unmap_sg, .dma_supported = alpha_pci_supported, diff --git a/arch/alpha/kernel/syscalls/syscall.tbl b/arch/alpha/kernel/syscalls/syscall.tbl index 16dca28ebf17e5..3fed97478058eb 100644 --- a/arch/alpha/kernel/syscalls/syscall.tbl +++ b/arch/alpha/kernel/syscalls/syscall.tbl @@ -509,3 +509,4 @@ 577 common open_tree_attr sys_open_tree_attr 578 common file_getattr sys_file_getattr 579 common file_setattr sys_file_setattr +580 common listns sys_listns diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4fb985b76e97f7..fa83c040ee2d40 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -82,7 +82,7 @@ config ARM select HAS_IOPORT select HAVE_ARCH_AUDITSYSCALL if AEABI && !OABI_COMPAT select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6 - select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU + select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU && (!PREEMPT_RT || !SMP) select HAVE_ARCH_KFENCE if MMU && !XIP_KERNEL select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU select HAVE_ARCH_KASAN if MMU && !XIP_KERNEL @@ -1161,8 +1161,6 @@ config AEABI disambiguate both ABIs and allow for backward compatibility support (selected with CONFIG_OABI_COMPAT). - To use this you need GCC version 4.0.0 or later. - config OABI_COMPAT bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)" depends on AEABI && !THUMB2_KERNEL @@ -1215,7 +1213,7 @@ config HIGHMEM config HIGHPTE bool "Allocate 2nd-level pagetables from highmem" if EXPERT - depends on HIGHMEM + depends on HIGHMEM && !PREEMPT_RT default y help The VM uses one page of physical memory for each page table. diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile index 0f0b5b7076545e..9adf9278dc94f8 100644 --- a/arch/arm/boot/dts/aspeed/Makefile +++ b/arch/arm/boot/dts/aspeed/Makefile @@ -39,6 +39,8 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-facebook-yamp.dtb \ aspeed-bmc-facebook-yosemitev2.dtb \ aspeed-bmc-facebook-yosemite4.dtb \ + aspeed-bmc-facebook-yosemite5.dtb \ + aspeed-bmc-ibm-balcones.dtb \ aspeed-bmc-ibm-blueridge.dtb \ aspeed-bmc-ibm-bonnell.dtb \ aspeed-bmc-ibm-everest.dtb \ diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts index ecef44d8997775..450446913e36b1 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts @@ -95,6 +95,11 @@ led-3 { label = "bmc_ready_cpld_noled"; gpios = <&gpio0 ASPEED_GPIO(P, 5) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>; }; + + led-hdd { + label = "hdd_led"; + gpios = <&io_expander13 1 GPIO_ACTIVE_LOW>; + }; }; memory@80000000 { @@ -642,12 +647,14 @@ &i2c1 { power-monitor@12 { compatible = "ti,lm5066i"; reg = <0x12>; + shunt-resistor-micro-ohms = <183>; }; // PDB power-monitor@14 { compatible = "ti,lm5066i"; reg = <0x14>; + shunt-resistor-micro-ohms = <183>; }; // Module 0 @@ -1197,7 +1204,7 @@ io_expander13: gpio@14 { #gpio-cells = <2>; gpio-line-names = "rmc_en_dc_pwr_on", - "", + "HDD_LED_N", "", "", "", diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts index b733efe31e8d24..1c50e4a367b24d 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts @@ -240,6 +240,14 @@ gpio@12 { &i2c1 { status = "okay"; + mctp-controller; + multi-master; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + temperature-sensor@4b { compatible = "ti,tmp75"; reg = <0x4b>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts index 72c84f31bdf64e..f74f463cc87818 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts @@ -39,6 +39,38 @@ aliases { i2c37 = &i2c12mux0ch5; i2c38 = &i2c12mux0ch6; i2c39 = &i2c12mux0ch7; + i2c48 = &i2c6mux0ch0; + i2c49 = &i2c6mux0ch1; + i2c50 = &i2c6mux0ch2; + i2c51 = &i2c6mux0ch3; + i2c52 = &i2c8mux0ch0; + i2c53 = &i2c8mux0ch1; + i2c54 = &i2c8mux0ch2; + i2c55 = &i2c8mux0ch3; + i2c56 = &i2c10mux0ch0; + i2c57 = &i2c10mux0ch1; + i2c58 = &i2c10mux0ch2; + i2c59 = &i2c10mux0ch3; + i2c60 = &i2c13mux0ch0; + i2c61 = &i2c13mux0ch1; + i2c62 = &i2c13mux0ch2; + i2c63 = &i2c13mux0ch3; + i2c64 = &i2c6mux1ch0; + i2c65 = &i2c6mux1ch1; + i2c66 = &i2c6mux1ch2; + i2c67 = &i2c6mux1ch3; + i2c68 = &i2c8mux1ch0; + i2c69 = &i2c8mux1ch1; + i2c70 = &i2c8mux1ch2; + i2c71 = &i2c8mux1ch3; + i2c72 = &i2c10mux1ch0; + i2c73 = &i2c10mux1ch1; + i2c74 = &i2c10mux1ch2; + i2c75 = &i2c10mux1ch3; + i2c76 = &i2c13mux1ch0; + i2c77 = &i2c13mux1ch1; + i2c78 = &i2c13mux1ch2; + i2c79 = &i2c13mux1ch3; }; chosen { @@ -72,6 +104,11 @@ led-2 { default-state = "off"; gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>; }; + + led-3 { + label = "bmc_ready_noled"; + gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>; + }; }; memory@80000000 { @@ -171,7 +208,7 @@ &gpio0 { "led-postcode-2","led-postcode-3", "led-postcode-4","led-postcode-5", "led-postcode-6","led-postcode-7", - /*O0-O7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","debug-card-mux", /*P0-P7*/ "power-button","","reset-button","", "led-power","","","", /*Q0-Q7*/ "","","","","","","","", @@ -292,6 +329,20 @@ gpio@26 { }; }; +&i2c3 { + status = "okay"; + + sbrmi@3c { + compatible = "amd,sbrmi"; + reg = <0x3c>; + }; + + sbtsi@4c { + compatible = "amd,sbtsi"; + reg = <0x4c>; + }; +}; + &i2c4 { status = "okay"; @@ -319,16 +370,19 @@ eeprom@53 { reg = <0x53>; }; }; + i2c4mux0ch1: i2c@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; }; + i2c4mux0ch2: i2c@2 { reg = <2>; #address-cells = <1>; #size-cells = <0>; }; + i2c4mux0ch3: i2c@3 { reg = <3>; #address-cells = <1>; @@ -380,16 +434,19 @@ temperature-sensor@4e { reg = <0x4e>; }; }; + i2c4mux0ch4: i2c@4 { reg = <4>; #address-cells = <1>; #size-cells = <0>; }; + i2c4mux0ch5: i2c@5 { reg = <5>; #address-cells = <1>; #size-cells = <0>; }; + i2c4mux0ch6: i2c@6 { reg = <6>; #address-cells = <1>; @@ -424,6 +481,7 @@ voltage-sensor@48 { reg = <0x48>; }; }; + i2c4mux0ch7: i2c@7 { reg = <7>; #address-cells = <1>; @@ -469,16 +527,19 @@ i2c5mux0ch0: i2c@0 { #address-cells = <1>; #size-cells = <0>; }; + i2c5mux0ch1: i2c@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; }; + i2c5mux0ch2: i2c@2 { reg = <2>; #address-cells = <1>; #size-cells = <0>; }; + i2c5mux0ch3: i2c@3 { reg = <3>; #address-cells = <1>; @@ -503,6 +564,7 @@ voltage-sensor@48 { reg = <0x48>; }; }; + i2c5mux1ch1: i2c@1 { reg = <1>; #address-cells = <1>; @@ -513,6 +575,7 @@ temperature-sensor@48 { reg = <0x48>; }; }; + i2c5mux1ch2: i2c@2 { reg = <2>; #address-cells = <1>; @@ -542,6 +605,7 @@ power-monitor@45 { shunt-resistor = <2000>; }; }; + i2c5mux1ch3: i2c@3 { reg = <3>; #address-cells = <1>; @@ -574,6 +638,210 @@ eeprom@52 { compatible = "atmel,24c256"; reg = <0x52>; }; + + i2c-mux@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c6mux0ch0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + temperature-sensor@64 { + compatible = "microchip,mcp9600"; + reg = <0x64>; + }; + + temperature-sensor@65 { + compatible = "microchip,mcp9600"; + reg = <0x65>; + }; + + temperature-sensor@67 { + compatible = "microchip,mcp9600"; + reg = <0x67>; + }; + + i2c-mux@72 { + compatible = "nxp,pca9546"; + reg = <0x72>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c6mux1ch0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c6mux1ch1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + voltage-sensor@48 { + compatible = "ti,ads7830"; + reg = <0x48>; + }; + + voltage-sensor@49 { + compatible = "ti,ads7830"; + reg = <0x49>; + }; + + temperature-sensor@4a { + compatible = "ti,tmp175"; + reg = <0x4a>; + }; + + temperature-sensor@4b { + compatible = "ti,tmp175"; + reg = <0x4b>; + }; + + eeprom@56 { + compatible = "atmel,24c256"; + reg = <0x56>; + }; + }; + + i2c6mux1ch2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c6mux1ch3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + i2c6mux0ch1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + potentiometer@2c { + compatible = "adi,ad5272-020"; + reg = <0x2c>; + }; + + potentiometer@2e { + compatible = "adi,ad5272-020"; + reg = <0x2e>; + }; + + potentiometer@2f { + compatible = "adi,ad5272-020"; + reg = <0x2f>; + }; + + power-monitor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-monitor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + power-monitor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + }; + + i2c6mux0ch2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + potentiometer@2c { + compatible = "adi,ad5272-020"; + reg = <0x2c>; + }; + + potentiometer@2e { + compatible = "adi,ad5272-020"; + reg = <0x2e>; + }; + + potentiometer@2f { + compatible = "adi,ad5272-020"; + reg = <0x2f>; + }; + + power-monitor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-monitor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + power-monitor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + }; + + i2c6mux0ch3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + voltage-sensor@1d { + compatible = "ti,adc128d818"; + reg = <0x1d>; + ti,mode = /bits/ 8 <1>; + }; + + voltage-sensor@37 { + compatible = "ti,adc128d818"; + reg = <0x37>; + ti,mode = /bits/ 8 <1>; + }; + + power-monitor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-monitor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + + temperature-sensor@48 { + compatible = "ti,tmp175"; + reg = <0x48>; + }; + + temperature-sensor@49 { + compatible = "ti,tmp175"; + reg = <0x49>; + }; + }; + }; }; &i2c7 { @@ -588,6 +856,210 @@ eeprom@52 { compatible = "atmel,24c256"; reg = <0x52>; }; + + i2c-mux@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c8mux0ch0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + temperature-sensor@64 { + compatible = "microchip,mcp9600"; + reg = <0x64>; + }; + + temperature-sensor@65 { + compatible = "microchip,mcp9600"; + reg = <0x65>; + }; + + temperature-sensor@67 { + compatible = "microchip,mcp9600"; + reg = <0x67>; + }; + + i2c-mux@72 { + compatible = "nxp,pca9546"; + reg = <0x72>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c8mux1ch0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c8mux1ch1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + voltage-sensor@48 { + compatible = "ti,ads7830"; + reg = <0x48>; + }; + + voltage-sensor@49 { + compatible = "ti,ads7830"; + reg = <0x49>; + }; + + temperature-sensor@4a { + compatible = "ti,tmp175"; + reg = <0x4a>; + }; + + temperature-sensor@4b { + compatible = "ti,tmp175"; + reg = <0x4b>; + }; + + eeprom@56 { + compatible = "atmel,24c256"; + reg = <0x56>; + }; + }; + + i2c8mux1ch2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c8mux1ch3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + i2c8mux0ch1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + potentiometer@2c { + compatible = "adi,ad5272-020"; + reg = <0x2c>; + }; + + potentiometer@2e { + compatible = "adi,ad5272-020"; + reg = <0x2e>; + }; + + potentiometer@2f { + compatible = "adi,ad5272-020"; + reg = <0x2f>; + }; + + power-monitor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-monitor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + power-monitor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + }; + + i2c8mux0ch2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + potentiometer@2c { + compatible = "adi,ad5272-020"; + reg = <0x2c>; + }; + + potentiometer@2e { + compatible = "adi,ad5272-020"; + reg = <0x2e>; + }; + + potentiometer@2f { + compatible = "adi,ad5272-020"; + reg = <0x2f>; + }; + + power-monitor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-monitor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + power-monitor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + }; + + i2c8mux0ch3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + voltage-sensor@1d { + compatible = "ti,adc128d818"; + reg = <0x1d>; + ti,mode = /bits/ 8 <1>; + }; + + voltage-sensor@37 { + compatible = "ti,adc128d818"; + reg = <0x37>; + ti,mode = /bits/ 8 <1>; + }; + + power-monitor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-monitor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + + temperature-sensor@48 { + compatible = "ti,tmp175"; + reg = <0x48>; + }; + + temperature-sensor@49 { + compatible = "ti,tmp175"; + reg = <0x49>; + }; + }; + }; }; &i2c9 { @@ -604,6 +1076,11 @@ eeprom@50 { reg = <0x50>; }; + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + // BSM FRU eeprom@56 { compatible = "atmel,24c64"; @@ -619,11 +1096,222 @@ eeprom@52 { compatible = "atmel,24c256"; reg = <0x52>; }; + + i2c-mux@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c10mux0ch0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + temperature-sensor@64 { + compatible = "microchip,mcp9600"; + reg = <0x64>; + }; + + temperature-sensor@65 { + compatible = "microchip,mcp9600"; + reg = <0x65>; + }; + + temperature-sensor@67 { + compatible = "microchip,mcp9600"; + reg = <0x67>; + }; + + i2c-mux@72 { + compatible = "nxp,pca9546"; + reg = <0x72>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c10mux1ch0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c10mux1ch1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + voltage-sensor@48 { + compatible = "ti,ads7830"; + reg = <0x48>; + }; + + voltage-sensor@49 { + compatible = "ti,ads7830"; + reg = <0x49>; + }; + + temperature-sensor@4a { + compatible = "ti,tmp175"; + reg = <0x4a>; + }; + + temperature-sensor@4b { + compatible = "ti,tmp175"; + reg = <0x4b>; + }; + + eeprom@56 { + compatible = "atmel,24c256"; + reg = <0x56>; + }; + }; + + i2c10mux1ch2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c10mux1ch3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + i2c10mux0ch1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + potentiometer@2c { + compatible = "adi,ad5272-020"; + reg = <0x2c>; + }; + + potentiometer@2e { + compatible = "adi,ad5272-020"; + reg = <0x2e>; + }; + + potentiometer@2f { + compatible = "adi,ad5272-020"; + reg = <0x2f>; + }; + + power-monitor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-monitor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + power-monitor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + }; + + i2c10mux0ch2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + potentiometer@2c { + compatible = "adi,ad5272-020"; + reg = <0x2c>; + }; + + potentiometer@2e { + compatible = "adi,ad5272-020"; + reg = <0x2e>; + }; + + potentiometer@2f { + compatible = "adi,ad5272-020"; + reg = <0x2f>; + }; + + power-monitor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-monitor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + power-monitor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + }; + + i2c10mux0ch3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + voltage-sensor@1d { + compatible = "ti,adc128d818"; + reg = <0x1d>; + ti,mode = /bits/ 8 <1>; + }; + + voltage-sensor@37 { + compatible = "ti,adc128d818"; + reg = <0x37>; + ti,mode = /bits/ 8 <1>; + }; + + power-monitor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-monitor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + + temperature-sensor@48 { + compatible = "ti,tmp175"; + reg = <0x48>; + }; + + temperature-sensor@49 { + compatible = "ti,tmp175"; + reg = <0x49>; + }; + }; + }; }; &i2c11 { + multi-master; + mctp-controller; status = "okay"; + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + // OCP NIC TEMP temperature-sensor@1f { compatible = "ti,tmp421"; @@ -663,6 +1351,7 @@ temperature-sensor@48 { reg = <0x48>; }; }; + i2c12mux0ch1: i2c@1 { reg = <1>; #address-cells = <1>; @@ -678,6 +1367,7 @@ power-monitor@43 { reg = <0x43>; }; }; + i2c12mux0ch2: i2c@2 { reg = <2>; #address-cells = <1>; @@ -695,6 +1385,7 @@ power-monitor@41 { shunt-resistor = <2000>; }; }; + i2c12mux0ch3: i2c@3 { reg = <3>; #address-cells = <1>; @@ -712,6 +1403,7 @@ power-monitor@45 { shunt-resistor = <2000>; }; }; + i2c12mux0ch4: i2c@4 { reg = <4>; #address-cells = <1>; @@ -722,16 +1414,19 @@ voltage-sensor@49 { reg = <0x49>; }; }; + i2c12mux0ch5: i2c@5 { reg = <5>; #address-cells = <1>; #size-cells = <0>; }; + i2c12mux0ch6: i2c@6 { reg = <6>; #address-cells = <1>; #size-cells = <0>; }; + i2c12mux0ch7: i2c@7 { reg = <7>; #address-cells = <1>; @@ -748,6 +1443,210 @@ eeprom@52 { compatible = "atmel,24c256"; reg = <0x52>; }; + + i2c-mux@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c13mux0ch0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + temperature-sensor@64 { + compatible = "microchip,mcp9600"; + reg = <0x64>; + }; + + temperature-sensor@65 { + compatible = "microchip,mcp9600"; + reg = <0x65>; + }; + + temperature-sensor@67 { + compatible = "microchip,mcp9600"; + reg = <0x67>; + }; + + i2c-mux@72 { + compatible = "nxp,pca9546"; + reg = <0x72>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c13mux1ch0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c13mux1ch1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + voltage-sensor@48 { + compatible = "ti,ads7830"; + reg = <0x48>; + }; + + voltage-sensor@49 { + compatible = "ti,ads7830"; + reg = <0x49>; + }; + + temperature-sensor@4a { + compatible = "ti,tmp175"; + reg = <0x4a>; + }; + + temperature-sensor@4b { + compatible = "ti,tmp175"; + reg = <0x4b>; + }; + + eeprom@56 { + compatible = "atmel,24c256"; + reg = <0x56>; + }; + }; + + i2c13mux1ch2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c13mux1ch3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + i2c13mux0ch1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + potentiometer@2c { + compatible = "adi,ad5272-020"; + reg = <0x2c>; + }; + + potentiometer@2e { + compatible = "adi,ad5272-020"; + reg = <0x2e>; + }; + + potentiometer@2f { + compatible = "adi,ad5272-020"; + reg = <0x2f>; + }; + + power-monitor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-monitor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + power-monitor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + }; + + i2c13mux0ch2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + potentiometer@2c { + compatible = "adi,ad5272-020"; + reg = <0x2c>; + }; + + potentiometer@2e { + compatible = "adi,ad5272-020"; + reg = <0x2e>; + }; + + potentiometer@2f { + compatible = "adi,ad5272-020"; + reg = <0x2f>; + }; + + power-monitor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-monitor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + power-monitor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + }; + + i2c13mux0ch3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + voltage-sensor@1d { + compatible = "ti,adc128d818"; + reg = <0x1d>; + ti,mode = /bits/ 8 <1>; + }; + + voltage-sensor@37 { + compatible = "ti,adc128d818"; + reg = <0x37>; + ti,mode = /bits/ 8 <1>; + }; + + power-monitor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + power-monitor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + + temperature-sensor@48 { + compatible = "ti,tmp175"; + reg = <0x48>; + }; + + temperature-sensor@49 { + compatible = "ti,tmp175"; + reg = <0x49>; + }; + }; + }; }; &i2c14 { @@ -864,7 +1763,9 @@ &sgpiom0 { "FM_IOEXP_U541_INT_N","", /*H4-H7 line 120-127*/ "FM_IOEXP_PDB2_U1003_INT_N","", - "","","","","","", + "","", + "","", + "FM_MAIN_PWREN_RMC_EN_ISO_R","", /*I0-I3 line 128-135*/ "","","","", "PDB_IRQ_PMBUS_ALERT_ISO_R_N","", @@ -873,7 +1774,7 @@ &sgpiom0 { "P12V_SCM_ADC_ALERT","", "CPU0_REGS_I2C_ALERT_N","", "FM_RTC_ALERT_N","", - "APML_CPU0_ALERT_R_N","", + "P0_I3C_APML_ALERT_L","", /*J0-J3 line 144-151*/ "SMB_RJ45_FIO_TMP_ALERT","", "FM_SMB_ALERT_MCIO_0A_N","", @@ -924,11 +1825,17 @@ &sgpiom0 { "PRSNT_LEAK_CABLE_1_R_N","", "PRSNT_LEAK_CABLE_2_R_N","", "PRSNT_HDT_N","", - "","", + "LEAK_SWB_COLDPLATE","", /*P0-P3 line 240-247*/ - "","","","","","","","", + "LEAK_R3_COLDPLATE","", + "LEAK_R2_COLDPLATE","", + "LEAK_R1_COLDPLATE","", + "LEAK_R0_COLDPLATE","", /*P4-P7 line 248-255*/ - "","","","","","","",""; + "LEAK_MB_COLDPLATE","", + "LEAK_PDB1_RIGHT_MANIFOLD","", + "LEAK_PDB1_LEFT_MANIFOLD","", + "LEAK_MB_MANIFOLD",""; status = "okay"; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts index 60b98d602e805e..e4172be84e7fe5 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts @@ -49,6 +49,20 @@ memory@80000000 { reg = <0x80000000 0x80000000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + ramoops@b8dfa000 { + compatible = "ramoops"; + reg = <0xb8dfa000 0x6000>; + record-size = <0x2000>; + console-size = <0x2000>; + pmsg-size = <0x2000>; + max-reason = <1>; + }; + }; + iio-hwmon { compatible = "iio-hwmon"; io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts new file mode 100644 index 00000000000000..2486981f3d6bd3 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite5.dts @@ -0,0 +1,1067 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2025 Facebook Inc. + +/dts-v1/; +#include "aspeed-g6.dtsi" +#include +#include + +/ { + model = "Facebook Yosemite 5 BMC"; + compatible = "facebook,yosemite5-bmc", "aspeed,ast2600"; + + aliases { + i2c16 = &i2c5mux0ch0; + i2c17 = &i2c5mux0ch1; + i2c18 = &i2c5mux0ch2; + i2c19 = &i2c5mux0ch3; + i2c20 = &i2c5mux1ch0; + i2c21 = &i2c5mux1ch1; + i2c22 = &i2c5mux1ch2; + i2c23 = &i2c5mux1ch3; + i2c24 = &i2c6mux0ch0; + i2c25 = &i2c6mux0ch1; + i2c26 = &i2c6mux0ch2; + i2c27 = &i2c6mux0ch3; + i2c28 = &i2c8mux0ch0; + i2c29 = &i2c8mux0ch1; + i2c30 = &i2c8mux0ch2; + i2c31 = &i2c8mux0ch3; + i2c32 = &i2c30mux0ch0; + i2c33 = &i2c30mux0ch1; + i2c34 = &i2c30mux0ch2; + i2c35 = &i2c30mux0ch3; + serial0 = &uart1; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + }; + + chosen { + stdout-path = "serial4:57600n8"; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, + <&adc1 2>; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + label = "bmc_heartbeat_amber"; + gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + label = "fp_id_amber"; + default-state = "off"; + gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>; + }; + + led-2 { + label = "power_blue"; + default-state = "off"; + gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + spi_gpio: spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; + miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>; + num-chipselects = <1>; + status = "okay"; + + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + spi-max-frequency = <33000000>; + reg = <0>; + }; + }; +}; + +&adc0 { + aspeed,int-vref-microvolt = <2500000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default + &pinctrl_adc5_default + &pinctrl_adc6_default + &pinctrl_adc7_default>; + status = "okay"; +}; + +&adc1 { + aspeed,int-vref-microvolt = <2500000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc10_default>; + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-128.dtsi" + }; + + flash@1 { + status = "okay"; + m25p,fast-read; + label = "alt-bmc"; + spi-max-frequency = <50000000>; + }; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "BATTERY_DETECT","","BMC_I2C1_FPGA_ALERT","BMC_READY", + "IOEXP_INT_3V3","FM_ID_LED","","", + /*C0-C7*/ "","","","", + "PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N","","BMC_I2C_SSIF_ALERT", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","","","","","","","", + /*G0-G7*/ "FM_BMC_MUX1_SEL","","","", + "","","FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","FLASH_WP_STATUS","BMC_JTAG_MUX_SEL","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "PCIE_EP_RST_EN","BMC_FRU_WP","SCM_HPM_STBY_RST_N", + "SCM_HPM_STBY_EN","STBY_POWER_PG_3V3","TH500_SHDN_OK","","", + /*N0-N7*/ "led-postcode-0","led-postcode-1","led-postcode-2", + "led-postcode-3","led-postcode-4","led-postcode-5", + "led-postcode-6","led-postcode-7", + /*O0-O7*/ "RUN_POWER_PG","PWR_BRAKE","CHASSIS_AC_LOSS","BSM_PRSNT_N", + "PSU_SMB_ALERT","FM_TPM_PRSNT_0_N","PSU_FW_UPDATING_N","", + /*P0-P7*/ "PWR_BTN_BMC_N","IPEX_CABLE_PRSNT","ID_RST_BTN_BMC_N", + "RST_BMC_RSTBTN_OUT_N","BMC_PWR_LED","RUN_POWER_EN","SHDN_FORCE","", + /*Q0-Q7*/ "IRQ_PCH_TPM_SPI_LV3_N","USB_OC0_REAR_N","UART_MUX_SEL", + "I2C_MUX_RESET","RSVD_NV_PLT_DETECT","SPI_TPM_INT", + "CPU_JTAG_MUX_SELECT","THERM_BB_OVERT", + /*R0-R7*/ "THERM_BB_WARN","SPI_BMC_FPGA_INT","CPU_BOOT_DONE","PMBUS_GNT", + "CHASSIS_PWR_BRK","PCIE_WAKE","PDB_THERM_OVERT","SHDN_REQ", + /*S0-S7*/ "","","SYS_BMC_PWRBTN_N","FM_TPM_PRSNT_1_N", + "FM_BMC_DEBUG_SW_N","UID_LED_N","SYS_FAULT_LED_N","RUN_POWER_FAULT", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "FM_DBP_BMC_PRDY_N","","","","","","","", + /*V0-V7*/ "L2_RST_REQ_OUT","L0L1_RST_REQ_OUT","BMC_ID_BEEP_SEL", + "BMC_I2C0_FPGA_ALERT","SMB_BMC_TMP_ALERT","PWR_LED_N", + "SYS_RST_OUT","IRQ_TPM_SPI_N", + /*W0-W7*/ "","","","","","","IRQ_ESPI_LPC_SERIRQ_ALERT0_N","", + /*X0-X7*/ "","FM_DBP_CPU_PREQ_GF_N","","","","","","", + /*Y0-Y7*/ "","","FM_FLASH_LATCH_N","BMC_EMMC_RST_N","","","","", + /*Z0-Z7*/ "","","","","","","",""; +}; + +&gpio1 { + gpio-line-names = + /*18A0-18A7*/ "","","","","","","","", + /*18B0-18B7*/ "","","","","FM_BOARD_BMC_REV_ID0", + "FM_BOARD_BMC_REV_ID1","FM_BOARD_BMC_REV_ID2","", + /*18C0-18C7*/ "","","SPI_BMC_BIOS_ROM_IRQ0_N","","","","","", + /*18D0-18D7*/ "","","","","","","","", + /*18E0-18E3*/ "FM_BMC_PROT_LS_EN","AC_PWR_BMC_BTN_N","",""; +}; + +/* MB CPLD I2C */ +&i2c0 { + status = "okay"; +}; + +/* CPU I2C */ +&i2c1 { + status = "okay"; +}; + +/* MCIO 2A I2C */ +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + /* Socket 0 SBRMI */ + sbrmi@3c { + compatible = "amd,sbrmi"; + reg = <0x3c>; + }; + + /* Socket 0 SBTSI */ + sbtsi@4c { + compatible = "amd,sbtsi"; + reg = <0x4c>; + }; +}; + +&i2c4 { + multi-master; + mctp-controller; + status = "okay"; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + /* OCP NIC TEMP */ + temperature-sensor@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + + /* OCP NIC FRU EEPROM */ + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c5 { + status = "okay"; + + /* I2C MUX for MCIO 1A */ + i2c-mux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c5mux0ch0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c5mux0ch1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c5mux0ch2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c5mux0ch3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + /* I2C MUX for MCIO 0A */ + i2c-mux@77 { + compatible = "nxp,pca9546"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c5mux1ch0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c5mux1ch1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c5mux1ch2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c5mux1ch3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c6 { + status = "okay"; + + /* I2C MUX for PWRPIC #13 ~ #16 */ + i2c-mux@77 { + compatible = "nxp,pca9546"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + /* PWRPIC #13 */ + i2c6mux0ch0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + /* PWRPIC #14 */ + i2c6mux0ch1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + /* PWRPIC #16 */ + i2c6mux0ch2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + /* PWRPIC #15 */ + i2c6mux0ch3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +/* SCM CPLD I2C */ +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; + + power-monitor@14 { + compatible = "infineon,xdp710"; + reg = <0x14>; + }; + + adc@1d { + compatible = "ti,adc128d818"; + reg = <0x1d>; + ti,mode = /bits/ 8 <1>; + }; + + power-sensor@40 { + compatible = "ti,ina238"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + /* PADDLE BD IOEXP */ + gpio-expander@41 { + compatible = "nxp,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "HSC_OC_GPIO0", "HSC_OC_GPIO1", + "HSC_OC_GPIO2", "HSC_OC_GPIO3"; + }; + + power-sensor@42 { + compatible = "ti,ina238"; + reg = <0x42>; + shunt-resistor = <1000>; + }; + + power-monitor@43 { + compatible = "lltc,ltc4287"; + reg = <0x43>; + shunt-resistor-micro-ohms = <250>; + }; + + power-sensor@44 { + compatible = "ti,ina238"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + power-sensor@45 { + compatible = "ti,ina238"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + + power-monitor@47 { + compatible = "ti,tps25990"; + reg = <0x47>; + ti,rimon-micro-ohms = <430000000>; + }; + + temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + + temperature-sensor@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + + /* PDB FRU */ + eeprom@56 { + compatible = "atmel,24c128"; + reg = <0x56>; + }; + + /* Paddle BD FRU */ + eeprom@57 { + compatible = "atmel,24c128"; + reg = <0x57>; + }; + + power-monitor@58 { + compatible = "renesas,isl28022"; + reg = <0x58>; + shunt-resistor-micro-ohms = <1000>; + }; + + power-monitor@59 { + compatible = "renesas,isl28022"; + reg = <0x59>; + shunt-resistor-micro-ohms = <1000>; + }; + + power-monitor@5a { + compatible = "renesas,isl28022"; + reg = <0x5a>; + shunt-resistor-micro-ohms = <1000>; + }; + + power-monitor@5b { + compatible = "renesas,isl28022"; + reg = <0x5b>; + shunt-resistor-micro-ohms = <1000>; + }; + + psu@5c { + compatible = "renesas,raa228006"; + reg = <0x5c>; + }; + + fan-controller@5e{ + compatible = "maxim,max31790"; + reg = <0x5e>; + }; + + /* I2C MUX for PWRPIC #1, #2, #11, #12 */ + i2c-mux@77 { + compatible = "nxp,pca9546"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + /* PWRPIC #1 */ + i2c8mux0ch0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + /* PWRPIC #2 */ + i2c8mux0ch1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + /* PWRPIC #12 (Connector to CXL BD) */ + i2c8mux0ch2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + i2c-mux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c30mux0ch0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c30mux0ch1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c30mux0ch2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + adc@1e { + compatible = "ti,adc128d818"; + reg = <0x1e>; + ti,mode = /bits/ 8 <1>; + }; + + adc@1f { + compatible = "ti,adc128d818"; + reg = <0x1f>; + ti,mode = /bits/ 8 <1>; + }; + + /* CXL BD IOEXP */ + gpio-expander@27 { + compatible = "nxp,pca9535"; + reg = <0x27>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "IRQ_TEMP_0_ALERT_N","IRQ_TEMP_1_ALERT_N", + "ALERT_PMBUS_0_N","ALERT_PMBUS_1_N", + "ALERT_PMBUS_2_N","IRQ_INA230_12V_ALERT_N", + "RST_IOX_CXL_N","DEBUG_UART_SEL_0", + "DEBUG_UART_SEL_1","BMC_REMOTEJTAG_EN_N", + "JTAG_BMC_3V3_CTL_CLR_N","DDR_CH02_I2C_MUX_SEL", + "DDR_CH13_I2C_MUX_SEL","SYS_OK", + "CXL_VRHOT_ALERT_R1_N",""; + }; + + temperature-sensor@4a { + compatible = "ti,tmp75"; + reg = <0x4a>; + }; + + temperature-sensor@4c { + compatible = "ti,tmp432"; + reg = <0x4c>; + }; + + power-sensor@4d { + compatible = "ti,ina230"; + reg = <0x4d>; + shunt-resistor = <2000>; + }; + + temperature-sensor@4e { + compatible = "ti,tmp75"; + reg = <0x4e>; + }; + + /* CXL FRU */ + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + i2c30mux0ch3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + /* PWRPIC #11 */ + i2c8mux0ch3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c9 { + status = "okay"; + + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; + + /* SCM FRU */ + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + /* BSM FRU */ + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + }; +}; + +/* MCIO 0A I2C */ +&i2c10 { + status = "okay"; + + /* E1S EB IOEXP0 */ + gpio-expander@21 { + compatible = "nxp,pca9535"; + interrupt-parent = <&sgpiom0>; + interrupts = <172 IRQ_TYPE_EDGE_FALLING>; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "RST_SMB_E1S_0","LED_ACTIVE_E1S_0", + "E1S_0_PRSNT_N","RST_PCIE_E1S_0_PERST", + "E1S_0_PWRDIS","ALERT_INA_0", + "","", + "RST_SMB_E1S_1","LED_ACTIVE_E1S_1", + "E1S_1_PRSNT_N","RST_PCIE_E1S_1_PERST", + "E1S_1_PWRDIS","ALERT_INA_1", + "",""; + }; + + /* E1S EB IOEXP1 */ + gpio-expander@22 { + compatible = "nxp,pca9535"; + interrupt-parent = <&sgpiom0>; + interrupts = <174 IRQ_TYPE_EDGE_FALLING>; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "P12V_E1S_EN_0","PWRGD_P12V_E1S_0", + "P12V_E1S_FLTB_0","PWRGD_P3V3_E1S_0", + "FM_P3V3_E1S_0_FAULT","P12V_E1S_EN_1", + "PWRGD_P12V_E1S_1","P12V_E1S_FLTB_1", + "PWRGD_P3V3_E1S_1","FM_P3V3_E1S_1_FAULT", + "","", + "","", + "PWRGD_P3V3_AUX","ALERT_TEMP"; + }; + + power-sensor@40 { + compatible = "ti,ina233"; + reg = <0x40>; + shunt-resistor = <2000>; + ti,maximum-expected-current-microamp = <32768000>; + }; + + power-sensor@45 { + compatible = "ti,ina233"; + reg = <0x45>; + shunt-resistor = <2000>; + ti,maximum-expected-current-microamp = <32768000>; + }; + + adc@48 { + compatible = "ti,ads7830"; + reg = <0x48>; + }; + + temperature-sensor@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + + /* E1S EB FRU */ + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; +}; + +&i2c11 { + status = "okay"; + + /* MB IOEXP */ + gpio-expander@21 { + compatible = "nxp,pca9535"; + interrupt-parent = <&sgpiom0>; + interrupts = <170 IRQ_TYPE_EDGE_FALLING>; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "ALERT_CLKMUX_0_LOSS_N","ALERT_CLKMUX_1_LOSS_N", + "ALERT_CLKMUX_2_LOSS_N","ALERT_CLKMUX_3_LOSS_N", + "FM_CLKMUX_0_SEL","FM_CLKMUX_1_SEL", + "FM_CLKMUX_2_SEL","FM_CLKMUX_3_SEL", + "RST_USB_HUB_0_N","FM_CLKGEN_GPIO2", + "","FM_BMC_RTC_RST", + "FM_P3V_BAT_SCALED_EN","", + "FM_CLKGEN_GPIO4","RST_USB_HUB_1_N"; + }; + + power-sensor@40 { + compatible = "ti,ina230"; + reg = <0x40>; + shunt-resistor = <2000>; + }; + + power-sensor@41 { + compatible = "ti,ina230"; + reg = <0x41>; + shunt-resistor = <2000>; + }; + + power-sensor@42 { + compatible = "ti,ina230"; + reg = <0x42>; + shunt-resistor = <2000>; + }; + + power-sensor@43 { + compatible = "ti,ina230"; + reg = <0x43>; + shunt-resistor = <2000>; + }; + + power-sensor@44 { + compatible = "ti,ina230"; + reg = <0x44>; + shunt-resistor = <2000>; + }; + + power-sensor@45 { + compatible = "ti,ina230"; + reg = <0x45>; + shunt-resistor = <2000>; + }; + + adc@48 { + compatible = "ti,ads7830"; + reg = <0x48>; + }; + + adc@49 { + compatible = "ti,ads7830"; + reg = <0x49>; + }; + + adc@4b { + compatible = "ti,ads7830"; + reg = <0x4b>; + }; +}; + +/* MCIO 4A I2C */ +&i2c12 { + multi-master; + mctp-controller; + status = "okay"; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; +}; + +&i2c13 { + status = "okay"; + + power-sensor@40 { + compatible = "ti,ina230"; + reg = <0x40>; + shunt-resistor = <2000>; + }; + + power-sensor@41 { + compatible = "ti,ina230"; + reg = <0x41>; + shunt-resistor = <2000>; + }; + + power-sensor@44 { + compatible = "ti,ina230"; + reg = <0x44>; + shunt-resistor = <2000>; + }; + + power-sensor@45 { + compatible = "ti,ina230"; + reg = <0x45>; + shunt-resistor = <2000>; + }; + + temperature-sensor@48 { + compatible = "national,lm75b"; + reg = <0x48>; + }; + + temperature-sensor@49 { + compatible = "national,lm75b"; + reg = <0x49>; + }; + + /* CLKGEN FRU */ + eeprom@50 { + compatible = "atmel,24c16"; + reg = <0x50>; + }; + + /* MB FRU */ + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + /* CPU FRU */ + eeprom@53 { + compatible = "atmel,24c128"; + reg = <0x53>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +/* PROT reserve */ +&i2c14 { + status = "okay"; +}; + +/* MCIO 3A I2C */ +&i2c15 { + status = "okay"; +}; + +&kcs2 { + aspeed,lpc-io-reg = <0xca8>; + status = "okay"; +}; + +&kcs3 { + aspeed,lpc-io-reg = <0xca2>; + status = "okay"; +}; + +&mac2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ncsi3_default>; + use-ncsi; + status = "okay"; +}; + +&pinctrl { + pinctrl_ncsi3_default: ncsi3_default { + function = "RMII3"; + groups = "NCSI3"; + }; +}; + +&sgpiom0 { + ngpios = <128>; + bus-frequency = <2000000>; + gpio-line-names = + /*"input pin","output pin"*/ + /*bit0-bit7*/ + "PWRGD_CPU_PWROK","SGPIO_RSTBTN_OUT", + "PWRGD_CPU_PWROK_1","SGPIO_BMC_READY", + "PWRGD_CPU_PWROK_2","IBB_BMC_SRST", + "host0-ready","FM_I3C_SPD_AH_SEL_R", + "PCIe_HP_BOOT","FM_I3C_SPD_IP_SEL_R", + "PCIe_HP_DATA","FM_JTAG_BMC_MUX_S0_R", + "PCIe_HP_NIC","FM_JTAG_BMC_MUX_S1_R", + "","FM_JTAG_BMC_OE_1_R_N", + /*bit8-bit15*/ + "PWRGD_PVDDCR_CPU0_P0","FM_JTAG_BMC_OE_R_N", + "PWRGD_PVDDCR_SOC_P0","FM_REMOTEJTAG_EN_R_N", + "PWRGD_PVDDCR_CPU1_P0","FM_CPU_FORCE_SELFREFRESH_R", + "PWRGD_P3V3_STBY","FM_CPU_NMI_SYNC_FLOOD_R_N", + "PWRGD_PVDD33_S5","FM_CPU_TRIGGERTSC_OE_R_N", + "PWRGD_PVDD18_S5_P0","FM_PASSWORD_CLEAR_R_N", + "PWRGD_PVDDIO_P0","FM_BIOS_USB_RECOVERY_N", + "PWRGD_PVDDIO_MEM_S3_P0","FM_USB_MUX_OE_R_N", + /*bit16-bit23*/ + "PWRGD_P1V8_STBY","FM_USB_MUX_SEL_R", + "PWRGD_P1V0_STBY","RST_SMB_BOOT_R_N", + "PWRGD_P1V2_STBY","RST_SMB_MCIO0A_R_N", + "IBB_BMC_SRST","RST_SMB_NIC_R_N", + "PWRGD_P12V_E1S_0","FM_PPS_NIC_IN_BUF_OE_R_N", + "PWRGD_P12V_E1S_1","FM_PPS_NIC_IN_EN_R", + "RST_PCIE_BOOT_PERST_N","FM_PPS_NIC_IN_OE_R_N", + "PWRGD_P12V_NIC","FM_PPS_NIC_IN_S0_R", + /*bit24-bit31*/ + "PWRGD_P12V_SCM","FM_PPS_NIC_IN_S1_R", + "PWRGD_P12V_DIMM","FM_PPS_NIC_OUT_BUF_OE_R_N", + "PWRGD_CPU_DIMM0_AH","FM_PPS_NIC_OUT_CPU_OE_R_N", + "PWRGD_CPU_DIMM1_IP","FM_PPS_NIC_OUT_EN_R", + "PWRGD_NIC_CPLD","JTAG_CPLD_DBREQ_R_N", + "ALERT_INA230_DIMM_0_N","HDT_HDR_RESET_R_N", + "ALERT_INA230_DIMM_1_N","FM_SMB_AUTH_MUX_OE_R_N", + "ALERT_INA230_E1S_0_N","FM_SCM_LED_R_N", + /*bit32-bit39*/ + "ALERT_INA230_E1S_1_N","", + "ALERT_INA230_FAN0_N","", + "ALERT_INA230_FAN1_N","", + "ALERT_INA230_FAN2_N","", + "ALERT_INA230_FAN3_N","", + "ALERT_INA230_NIC_N","", + "ALERT_INA230_SCM_N","", + "ALERT_IRQ_PMBUS_PWR11_N","", + /*bit40-bit47*/ + "ALERT_MCIO2A_LEAK_DETECT_N","", + "ALERT_MCIO3A_LEAK_DETECT_N","", + "ALERT_MCIO4A_LEAK_DETECT_N","", + "ALERT_OC_PADDLE2_N","", + "ALERT_OC_PWR2_N","", + "ALERT_OC_PWR11_N","", + "ALERT_PADDLE2_SMB_N","", + "ALERT_PWR14_SB2_LEAK_DETECT_N","", + /*bit48-bit55*/ + "ALERT_PWR14_SB3_LEAK_DETECT_N","", + "ALERT_PWR15_SB2_LEAK_DETECT_N","", + "ALERT_PWR15_SB3_LEAK_DETECT_N","", + "ALERT_SMB_MCIO0A_N","", + "ALERT_SMB_MCIO1A_N","", + "ALERT_SMB_MCIO2A_N","", + "ALERT_SMB_MCIO2B_N","", + "ALERT_SMB_MCIO3A_N","", + /*bit56-bit63*/ + "ALERT_SMB_MCIO3B_N","", + "ALERT_SMB_MCIO4A_N","", + "ALERT_SMB_MCIO4B_N","", + "ALERT_THERMALTRIP_MCIO1A_N","", + "ALERT_THERMALTRIP_MCIO2A_N","", + "ALERT_THERMALTRIP_MCIO3A_N","", + "ALERT_THERMALTRIP_MCIO4A_N","", + "ALERT_UV_PADDLE2_N","", + /*bit64-bit71*/ + "ALERT_UV_PWR2_N","", + "ALERT_UV_PWR11_N","", + "ALERT_VR_SMB_N","", + "FAULT_FAN_0_N","", + "FAULT_FAN_1_N","", + "FAULT_FAN_2_N","", + "FAULT_FAN_3_N","", + "FAULT_P3V3_E1S_0_N","", + /*bit72-bit79*/ + "FAULT_P3V3_E1S_1_N","", + "FAULT_P3V3_NIC_N","", + "FAULT_P12V_NIC_N","", + "FAULT_P12V_SCM_N","", + "P0_I3C_APML_ALERT_L","", + "ALERT_INLET_TEMP_N","", + "FM_CPU_PROCHOT_R_N","", + "FM_CPU_THERMTRIP_N","", + /*bit80-bit87*/ + "ALERT_OUTLET_TEMP_N","", + "ALERT_RTC_N","", + "PVDDCR_CPU0_P0_OCP_N","", + "PVDDCR_CPU1_P0_OCP_N","", + "PVDDCR_SOC_P0_OCP_N","", + "MB_IOEXP_INT","", + "E1S_0_BD_IOEXP","", + "E1S_1_BD_IOEXP","", + /*bit88-bit95*/ + "PADDLE_BD_IOEXP_INT","", + "FM_BOARD_REV_ID0","", + "FM_BOARD_REV_ID1","", + "FM_BOARD_REV_ID2","", + "FM_VR_TYPE_ID0","", + "FM_VR_TYPE_ID1","", + "PRSNT_BOOT_N_IOEXP","", + "PRSNT_DATA_N_IOEXP","", + /*bit96-bit103*/ + "PRSNT_NIC_N_IOEXP","", + "PRSNT_BOOT_N_FF","", + "PRSNT_MCIO1A_N_FF","", + "NIC_PRSNT_N","", + "","", + "","", + "","", + "","", + /*bit104-bit111*/ + "","","","","","","","","","","","","","","","", + /*bit112-bit119*/ + "","","","","","","","","","","","","","","","", + /*bit120-bit127*/ + "","","","","","","","","","","","","","","",""; + status = "okay"; +}; + +/* BIOS Flash */ +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2_default>; + status = "okay"; + + flash@0 { + m25p,fast-read; + label = "pnor"; + spi-max-frequency = <12000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + status = "okay"; + }; +}; + +/* Host Console */ +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +/* SOL */ +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +/* BMC Console */ +&uart5 { + status = "okay"; +}; + +&wdt1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; + aspeed,reset-type = "soc"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + aspeed,ext-pulse-duration = <256>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts new file mode 100644 index 00000000000000..63fcb7a7619abd --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-balcones.dts @@ -0,0 +1,609 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2025 IBM Corp. +/dts-v1/; + +#include +#include +#include +#include "aspeed-g6.dtsi" +#include "ibm-power11-dual.dtsi" + +/ { + model = "Balcones"; + compatible = "ibm,balcones-bmc", "aspeed,ast2600"; + + aliases { + serial4 = &uart5; + i2c16 = &i2c11mux0chn0; + i2c17 = &i2c11mux0chn1; + i2c18 = &i2c11mux0chn2; + i2c19 = &i2c11mux0chn3; + }; + + chosen { + stdout-path = &uart5; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <1000>; + + event-fan0-presence { + gpios = <&gpio0 ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>; + label = "fan0-presence"; + linux,code = <6>; + }; + + event-fan1-presence { + gpios = <&gpio0 ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>; + label = "fan1-presence"; + linux,code = <7>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc1 7>; + }; + + leds { + compatible = "gpio-leds"; + + led-fan0 { + gpios = <&gpio0 ASPEED_GPIO(G, 0) GPIO_ACTIVE_LOW>; + }; + + led-fan1 { + gpios = <&gpio0 ASPEED_GPIO(G, 1) GPIO_ACTIVE_LOW>; + }; + + led-rear-enc-id0 { + gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>; + }; + + led-rear-enc-fault0 { + gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + event_log: region@b3d00000 { + reg = <0xb3d00000 0x100000>; + no-map; + }; + + ramoops@b3e00000 { + compatible = "ramoops"; + reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */ + record-size = <0x8000>; + console-size = <0x8000>; + ftrace-size = <0x8000>; + pmsg-size = <0x8000>; + max-reason = <3>; /* KMSG_DUMP_EMERG */ + }; + + /* LPC FW cycle bridge region requires natural alignment */ + flash_memory: region@b4000000 { + reg = <0xb4000000 0x04000000>; /* 64M */ + no-map; + }; + + /* VGA region is dictated by hardware strapping */ + vga_memory: region@bf000000 { + compatible = "shared-dma-pool"; + reg = <0xbf000000 0x01000000>; /* 16M */ + no-map; + }; + }; +}; + +&adc1 { + aspeed,int-vref-microvolt = <2500000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default + &pinctrl_adc10_default &pinctrl_adc11_default + &pinctrl_adc12_default &pinctrl_adc13_default + &pinctrl_adc14_default &pinctrl_adc15_default>; + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emmc { + clk-phase-mmc-hs200 = <180>, <180>; + status = "okay"; +}; + +&emmc_controller { + status = "okay"; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "","","","","","","checkstop","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "","fan-ctlr-reset","rtc-battery-voltage-read-enable", + "reset-cause-pinhole","","","","", + /*G0-G7*/ "fan0","fan1","","","","","","", + /*H0-H7*/ "","","rear-enc-id0","rear-enc-fault0","","","","", + /*I0-I7*/ "","","","","","","bmc-secure-boot","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","usb-power","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "cfam-reset","","regulator-standby-faulted","","","","","", + /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","", + "","","", + /*S0-S7*/ "presence-ps0","presence-ps1","","","power-ffs-sync-history","","", + "", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","",""; + + usb-power-hog { + gpio-hog; + gpios = ; + output-high; + }; +}; + +&i2c0 { + status = "okay"; + + gpio@20 { + compatible = "ti,tca9554"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "", + "RUSSEL_FW_I2C_ENABLE_N", + "RUSSEL_OPPANEL_PRESENCE_N", + "BLYTH_OPPANEL_PRESENCE_N", + "CPU_TPM_CARD_PRESENT_N", + "", + "", + "DASD_BP_PRESENT_N"; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; + + pmic@64 { + compatible = "ti,ucd90160"; + reg = <0x64>; + }; +}; + +&i2c3 { + status = "okay"; + + power-supply@5a { + compatible = "acbel,fsg032"; + reg = <0x5a>; + }; + + power-supply@5b { + compatible = "acbel,fsg032"; + reg = <0x5b>; + }; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; + + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + + led-controller@62 { + compatible = "nxp,pca9551"; + reg = <0x62>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "cablecard2-cxp-top"; + retain-state-shutdown; + type = ; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "cablecard2-cxp-bot"; + retain-state-shutdown; + type = ; + }; + }; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + multi-master; + status = "okay"; + + temperature-sensor@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + pwm@53 { + compatible = "maxim,max31785a"; + reg = <0x53>; + }; + + led-controller@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "front-sys-id0"; + retain-state-shutdown; + type = ; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "front-check-log0"; + retain-state-shutdown; + type = ; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "front-enc-fault1"; + retain-state-shutdown; + type = ; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "front-sys-pwron0"; + retain-state-shutdown; + type = ; + }; + }; + + lcd-controller@62 { + compatible = "ibm,op-panel"; + reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + pressure-sensor@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; +}; + +&i2c8 { + status = "okay"; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + led-controller@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "", + "APSS_RESET_N", + "", + "N_MODE_CPU_N", + "", + "", + "P10_DCM_PRESENT", + ""; + }; + + led-controller@61 { + compatible = "nxp,pca9552"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "", + "", + "SLOT2_PRSNT_EN_RSVD", + "", + "", + "", + "", + "SLOT2_EXPANDER_PRSNT_N", + "", + "", + "", + "", + "", + "", + "", + ""; + }; +}; + +&i2c9 { + status = "okay"; + + temperature-sensor@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; + + gpio@20 { + compatible = "ti,tca9554"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "BOOT_RCVRY_TWI", + "BOOT_RCVRY_UART", + "", + "", + "", + "", + "", + "PE_SWITCH_RSTB_N"; + }; + + temperature-sensor@4c { + compatible = "ti,tmp435"; + reg = <0x4c>; + }; + + i2c-mux@75 { + compatible = "nxp,pca9849"; + reg = <0x75>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + i2c11mux0chn0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c11mux0chn1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c11mux0chn2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c11mux0chn3: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c12 { + status = "okay"; + + tpm@2e { + compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c"; + reg = <0x2e>; + memory-region = <&event_log>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; +}; + +&i2c13 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + led-controller@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + led@0 { + reg = <0>; + default-state = "keep"; + label = "nvme3"; + retain-state-shutdown; + type = ; + }; + + led@1 { + reg = <1>; + default-state = "keep"; + label = "nvme2"; + retain-state-shutdown; + type = ; + }; + + led@2 { + reg = <2>; + default-state = "keep"; + label = "nvme1"; + retain-state-shutdown; + type = ; + }; + + led@3 { + reg = <3>; + default-state = "keep"; + label = "nvme0"; + retain-state-shutdown; + type = ; + }; + }; +}; + +&i2c14 { + status = "okay"; +}; + +&i2c15 { + status = "okay"; +}; + +&ibt { + status = "okay"; +}; + +&kcs2 { + aspeed,lpc-io-reg = <0xca8 0xcac>; + status = "okay"; +}; + +&kcs3 { + aspeed,lpc-io-reg = <0xca2>; + aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + status = "okay"; +}; + +&lpc_ctrl { + memory-region = <&flash_memory>; + status = "okay"; +}; + +&mac2 { + clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>, + <&syscon ASPEED_CLK_MAC3RCLK>; + clock-names = "MACCLK", "RCLK"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; + use-ncsi; + status = "okay"; +}; + +&pinctrl_emmc_default { + bias-disable; +}; + +&uart2 { + status = "okay"; +}; + +&uhci { + status = "okay"; +}; + +&vuart1 { + status = "okay"; +}; + +&vuart2 { + status = "okay"; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts index 2f5d4075a64ade..a37399ff3cea2b 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-bonnell.dts @@ -277,15 +277,11 @@ max31785@52 { #size-cells = <0>; fan0: fan@0 { - compatible = "pmbus-fan"; reg = <0>; - tach-pulses = <2>; }; fan1: fan@1 { - compatible = "pmbus-fan"; reg = <1>; - tach-pulses = <2>; }; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts index 9f144f527f03b9..5a0975d52492c5 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts @@ -2066,27 +2066,19 @@ max31785@52 { reg = <0x52>; fan@0 { - compatible = "pmbus-fan"; reg = <0>; - tach-pulses = <2>; }; fan@1 { - compatible = "pmbus-fan"; reg = <1>; - tach-pulses = <2>; }; fan@2 { - compatible = "pmbus-fan"; reg = <2>; - tach-pulses = <2>; }; fan@3 { - compatible = "pmbus-fan"; reg = <3>; - tach-pulses = <2>; }; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts index c5fb5d410001be..e90421bf7e3af7 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts @@ -1080,39 +1080,27 @@ max: max31785@52 { #size-cells = <0>; fan0: fan@0 { - compatible = "pmbus-fan"; reg = <0>; - tach-pulses = <2>; }; fan1: fan@1 { - compatible = "pmbus-fan"; reg = <1>; - tach-pulses = <2>; }; fan2: fan@2 { - compatible = "pmbus-fan"; reg = <2>; - tach-pulses = <2>; }; fan3: fan@3 { - compatible = "pmbus-fan"; reg = <3>; - tach-pulses = <2>; }; fan4: fan@4 { - compatible = "pmbus-fan"; reg = <4>; - tach-pulses = <2>; }; fan5: fan@5 { - compatible = "pmbus-fan"; reg = <5>; - tach-pulses = <2>; }; }; diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts index b31eb8e58c6b47..6fe7023599e882 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts @@ -481,55 +481,19 @@ max31785@52 { #size-cells = <0>; fan@0 { - compatible = "pmbus-fan"; reg = <0>; - tach-pulses = <2>; - maxim,fan-rotor-input = "tach"; - maxim,fan-pwm-freq = <25000>; - maxim,fan-dual-tach; - maxim,fan-no-watchdog; - maxim,fan-no-fault-ramp; - maxim,fan-ramp = <2>; - maxim,fan-fault-pin-mon; }; fan@1 { - compatible = "pmbus-fan"; reg = <1>; - tach-pulses = <2>; - maxim,fan-rotor-input = "tach"; - maxim,fan-pwm-freq = <25000>; - maxim,fan-dual-tach; - maxim,fan-no-watchdog; - maxim,fan-no-fault-ramp; - maxim,fan-ramp = <2>; - maxim,fan-fault-pin-mon; }; fan@2 { - compatible = "pmbus-fan"; reg = <2>; - tach-pulses = <2>; - maxim,fan-rotor-input = "tach"; - maxim,fan-pwm-freq = <25000>; - maxim,fan-dual-tach; - maxim,fan-no-watchdog; - maxim,fan-no-fault-ramp; - maxim,fan-ramp = <2>; - maxim,fan-fault-pin-mon; }; fan@3 { - compatible = "pmbus-fan"; reg = <3>; - tach-pulses = <2>; - maxim,fan-rotor-input = "tach"; - maxim,fan-pwm-freq = <25000>; - maxim,fan-dual-tach; - maxim,fan-no-watchdog; - maxim,fan-no-fault-ramp; - maxim,fan-ramp = <2>; - maxim,fan-fault-pin-mon; }; }; diff --git a/arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi b/arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi new file mode 100644 index 00000000000000..6db02d47538006 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/ibm-power11-dual.dtsi @@ -0,0 +1,779 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2025 IBM Corp. + +/ { + aliases { + i2c100 = &cfam0_i2c0; + i2c101 = &cfam0_i2c1; + i2c110 = &cfam0_i2c10; + i2c111 = &cfam0_i2c11; + i2c112 = &cfam0_i2c12; + i2c113 = &cfam0_i2c13; + i2c114 = &cfam0_i2c14; + i2c115 = &cfam0_i2c15; + i2c202 = &cfam1_i2c2; + i2c203 = &cfam1_i2c3; + i2c210 = &cfam1_i2c10; + i2c211 = &cfam1_i2c11; + i2c214 = &cfam1_i2c14; + i2c215 = &cfam1_i2c15; + i2c216 = &cfam1_i2c16; + i2c217 = &cfam1_i2c17; + + sbefifo100 = &sbefifo100; + sbefifo101 = &sbefifo101; + sbefifo110 = &sbefifo110; + sbefifo111 = &sbefifo111; + sbefifo112 = &sbefifo112; + sbefifo113 = &sbefifo113; + sbefifo114 = &sbefifo114; + sbefifo115 = &sbefifo115; + sbefifo202 = &sbefifo202; + sbefifo203 = &sbefifo203; + sbefifo210 = &sbefifo210; + sbefifo211 = &sbefifo211; + sbefifo214 = &sbefifo214; + sbefifo215 = &sbefifo215; + sbefifo216 = &sbefifo216; + sbefifo217 = &sbefifo217; + + scom100 = &scom100; + scom101 = &scom101; + scom110 = &scom110; + scom111 = &scom111; + scom112 = &scom112; + scom113 = &scom113; + scom114 = &scom114; + scom115 = &scom115; + scom202 = &scom202; + scom203 = &scom203; + scom210 = &scom210; + scom211 = &scom211; + scom214 = &scom214; + scom215 = &scom215; + scom216 = &scom216; + scom217 = &scom217; + + spi10 = &cfam0_spi0; + spi11 = &cfam0_spi1; + spi12 = &cfam0_spi2; + spi13 = &cfam0_spi3; + spi20 = &cfam1_spi0; + spi21 = &cfam1_spi1; + spi22 = &cfam1_spi2; + spi23 = &cfam1_spi3; + }; +}; + +&fsim0 { + bus-frequency = <100000000>; + #address-cells = <2>; + #size-cells = <0>; + cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>; + status = "okay"; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom@1000 { + compatible = "ibm,p9-scom"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,i2c-fsi"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam0_i2c0: i2c-bus@0 { + reg = <0>; /* OMI01 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom100: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo100: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam0_i2c1: i2c-bus@1 { + reg = <1>; /* OMI23 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom101: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo101: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam0_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom110: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo110: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam0_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom111: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo111: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam0_i2c12: i2c-bus@c { + reg = <12>; /* OP4A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom112: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo112: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam0_i2c13: i2c-bus@d { + reg = <13>; /* OP4B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom113: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo113: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam0_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom114: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo114: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam0_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom115: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo115: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam0_spi0: spi@0 { + compatible = "ibm,spi-fsi"; + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam0_spi1: spi@20 { + compatible = "ibm,spi-fsi"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam0_spi2: spi@40 { + compatible = "ibm,spi-fsi"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam0_spi3: spi@60 { + compatible = "ibm,spi-fsi"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + + occ { + compatible = "ibm,p10-occ"; + + hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; + }; + }; + + fsi_hub0: fsi@3400 { + compatible = "ibm,p9-fsi-controller"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + }; + }; +}; + +&fsi_hub0 { + cfam@1,0 { + reg = <1 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <1>; + + scom@1000 { + compatible = "ibm,p9-scom"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,i2c-fsi"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam1_i2c2: i2c-bus@2 { + reg = <2>; /* OMI45 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom202: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo202: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam1_i2c3: i2c-bus@3 { + reg = <3>; /* OMI67 */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom203: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo203: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam1_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom210: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo210: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam1_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom211: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo211: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam1_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom214: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo214: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam1_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom215: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo215: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam1_i2c16: i2c-bus@10 { + reg = <16>; /* OP6A */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom216: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo216: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + + cfam1_i2c17: i2c-bus@11 { + reg = <17>; /* OP6B */ + #address-cells = <1>; + #size-cells = <0>; + + fsi@20 { + compatible = "ibm,i2cr-fsi-master"; + reg = <0x20>; + #address-cells = <2>; + #size-cells = <0>; + + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom217: scom@1000 { + compatible = "ibm,i2cr-scom"; + reg = <0x1000 0x400>; + }; + + sbefifo217: sbefifo@2400 { + compatible = "ibm,odyssey-sbefifo"; + reg = <0x2400 0x400>; + }; + }; + }; + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam1_spi0: spi@0 { + compatible = "ibm,spi-fsi"; + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam1_spi1: spi@20 { + compatible = "ibm,spi-fsi"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam1_spi2: spi@40 { + compatible = "ibm,spi-fsi"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + + cfam1_spi3: spi@60 { + compatible = "ibm,spi-fsi"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "atmel,at25"; + reg = <0>; + address-width = <24>; + pagesize = <256>; + size = <0x80000>; + spi-max-frequency = <10000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + + occ { + compatible = "ibm,p10-occ"; + + hwmon { + compatible = "ibm,p10-occ-hwmon"; + ibm,no-poll-on-init; + }; + }; + }; + + fsi@3400 { + compatible = "ibm,p9-fsi-controller"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + no-scan-on-init; + }; + }; +}; diff --git a/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi b/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi index 68c941a194b643..7aa4113d302633 100644 --- a/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi +++ b/arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi @@ -1,24 +1,10 @@ // SPDX-License-Identifier: GPL-2.0-or-later // Copyright 2024 IBM Corp. +#include "ibm-power11-dual.dtsi" + / { aliases { - i2c100 = &cfam0_i2c0; - i2c101 = &cfam0_i2c1; - i2c110 = &cfam0_i2c10; - i2c111 = &cfam0_i2c11; - i2c112 = &cfam0_i2c12; - i2c113 = &cfam0_i2c13; - i2c114 = &cfam0_i2c14; - i2c115 = &cfam0_i2c15; - i2c202 = &cfam1_i2c2; - i2c203 = &cfam1_i2c3; - i2c210 = &cfam1_i2c10; - i2c211 = &cfam1_i2c11; - i2c214 = &cfam1_i2c14; - i2c215 = &cfam1_i2c15; - i2c216 = &cfam1_i2c16; - i2c217 = &cfam1_i2c17; i2c300 = &cfam2_i2c0; i2c301 = &cfam2_i2c1; i2c310 = &cfam2_i2c10; @@ -36,22 +22,6 @@ aliases { i2c416 = &cfam3_i2c16; i2c417 = &cfam3_i2c17; - sbefifo100 = &sbefifo100; - sbefifo101 = &sbefifo101; - sbefifo110 = &sbefifo110; - sbefifo111 = &sbefifo111; - sbefifo112 = &sbefifo112; - sbefifo113 = &sbefifo113; - sbefifo114 = &sbefifo114; - sbefifo115 = &sbefifo115; - sbefifo202 = &sbefifo202; - sbefifo203 = &sbefifo203; - sbefifo210 = &sbefifo210; - sbefifo211 = &sbefifo211; - sbefifo214 = &sbefifo214; - sbefifo215 = &sbefifo215; - sbefifo216 = &sbefifo216; - sbefifo217 = &sbefifo217; sbefifo300 = &sbefifo300; sbefifo301 = &sbefifo301; sbefifo310 = &sbefifo310; @@ -69,22 +39,6 @@ aliases { sbefifo416 = &sbefifo416; sbefifo417 = &sbefifo417; - scom100 = &scom100; - scom101 = &scom101; - scom110 = &scom110; - scom111 = &scom111; - scom112 = &scom112; - scom113 = &scom113; - scom114 = &scom114; - scom115 = &scom115; - scom202 = &scom202; - scom203 = &scom203; - scom210 = &scom210; - scom211 = &scom211; - scom214 = &scom214; - scom215 = &scom215; - scom216 = &scom216; - scom217 = &scom217; scom300 = &scom300; scom301 = &scom301; scom310 = &scom310; @@ -102,14 +56,6 @@ aliases { scom416 = &scom416; scom417 = &scom417; - spi10 = &cfam0_spi0; - spi11 = &cfam0_spi1; - spi12 = &cfam0_spi2; - spi13 = &cfam0_spi3; - spi20 = &cfam1_spi0; - spi21 = &cfam1_spi1; - spi22 = &cfam1_spi2; - spi23 = &cfam1_spi3; spi30 = &cfam2_spi0; spi31 = &cfam2_spi1; spi32 = &cfam2_spi2; @@ -121,718 +67,7 @@ aliases { }; }; -&fsim0 { - #address-cells = <2>; - #size-cells = <0>; - status = "okay"; - bus-frequency = <100000000>; - cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom@1000 { - compatible = "ibm,p9-scom"; - reg = <0x1000 0x400>; - }; - - i2c@1800 { - compatible = "ibm,i2c-fsi"; - reg = <0x1800 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - cfam0_i2c0: i2c-bus@0 { - reg = <0>; /* OMI01 */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom100: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo100: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - - cfam0_i2c1: i2c-bus@1 { - reg = <1>; /* OMI23 */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom101: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo101: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - - cfam0_i2c10: i2c-bus@a { - reg = <10>; /* OP3A */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom110: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo110: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - - cfam0_i2c11: i2c-bus@b { - reg = <11>; /* OP3B */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom111: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo111: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - - cfam0_i2c12: i2c-bus@c { - reg = <12>; /* OP4A */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom112: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo112: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - - cfam0_i2c13: i2c-bus@d { - reg = <13>; /* OP4B */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom113: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo113: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - - cfam0_i2c14: i2c-bus@e { - reg = <14>; /* OP5A */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom114: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo114: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - - cfam0_i2c15: i2c-bus@f { - reg = <15>; /* OP5B */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom115: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo115: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - }; - - fsi2spi@1c00 { - compatible = "ibm,fsi2spi"; - reg = <0x1c00 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - cfam0_spi0: spi@0 { - compatible = "ibm,spi-fsi"; - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; - - eeprom@0 { - compatible = "atmel,at25"; - reg = <0>; - address-width = <24>; - pagesize = <256>; - size = <0x80000>; - spi-max-frequency = <10000000>; - }; - }; - - cfam0_spi1: spi@20 { - compatible = "ibm,spi-fsi"; - reg = <0x20>; - #address-cells = <1>; - #size-cells = <0>; - - eeprom@0 { - compatible = "atmel,at25"; - reg = <0>; - address-width = <24>; - pagesize = <256>; - size = <0x80000>; - spi-max-frequency = <10000000>; - }; - }; - - cfam0_spi2: spi@40 { - compatible = "ibm,spi-fsi"; - reg = <0x40>; - #address-cells = <1>; - #size-cells = <0>; - - eeprom@0 { - compatible = "atmel,at25"; - reg = <0>; - address-width = <24>; - pagesize = <256>; - size = <0x80000>; - spi-max-frequency = <10000000>; - }; - }; - - cfam0_spi3: spi@60 { - compatible = "ibm,spi-fsi"; - reg = <0x60>; - #address-cells = <1>; - #size-cells = <0>; - - eeprom@0 { - compatible = "atmel,at25"; - reg = <0>; - address-width = <24>; - pagesize = <256>; - size = <0x80000>; - spi-max-frequency = <10000000>; - }; - }; - }; - - sbefifo@2400 { - compatible = "ibm,p9-sbefifo"; - reg = <0x2400 0x400>; - - occ { - compatible = "ibm,p10-occ"; - - hwmon { - compatible = "ibm,p10-occ-hwmon"; - ibm,no-poll-on-init; - }; - }; - }; - - fsi_hub0: fsi@3400 { - compatible = "ibm,p9-fsi-controller"; - reg = <0x3400 0x400>; - #address-cells = <2>; - #size-cells = <0>; - }; - }; -}; - &fsi_hub0 { - cfam@1,0 { - reg = <1 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <1>; - - scom@1000 { - compatible = "ibm,p9-scom"; - reg = <0x1000 0x400>; - }; - - i2c@1800 { - compatible = "ibm,i2c-fsi"; - reg = <0x1800 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - cfam1_i2c2: i2c-bus@2 { - reg = <2>; /* OMI45 */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom202: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo202: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - - cfam1_i2c3: i2c-bus@3 { - reg = <3>; /* OMI67 */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom203: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo203: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - - cfam1_i2c10: i2c-bus@a { - reg = <10>; /* OP3A */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom210: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo210: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - - cfam1_i2c11: i2c-bus@b { - reg = <11>; /* OP3B */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom211: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo211: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - - cfam1_i2c14: i2c-bus@e { - reg = <14>; /* OP5A */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom214: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo214: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - - cfam1_i2c15: i2c-bus@f { - reg = <15>; /* OP5B */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom215: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo215: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - - cfam1_i2c16: i2c-bus@10 { - reg = <16>; /* OP6A */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom216: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo216: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - - cfam1_i2c17: i2c-bus@11 { - reg = <17>; /* OP6B */ - #address-cells = <1>; - #size-cells = <0>; - - fsi@20 { - compatible = "ibm,i2cr-fsi-master"; - reg = <0x20>; - #address-cells = <2>; - #size-cells = <0>; - - cfam@0,0 { - reg = <0 0>; - #address-cells = <1>; - #size-cells = <1>; - chip-id = <0>; - - scom217: scom@1000 { - compatible = "ibm,i2cr-scom"; - reg = <0x1000 0x400>; - }; - - sbefifo217: sbefifo@2400 { - compatible = "ibm,odyssey-sbefifo"; - reg = <0x2400 0x400>; - }; - }; - }; - }; - }; - - fsi2spi@1c00 { - compatible = "ibm,fsi2spi"; - reg = <0x1c00 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - cfam1_spi0: spi@0 { - compatible = "ibm,spi-fsi"; - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; - - eeprom@0 { - compatible = "atmel,at25"; - reg = <0>; - address-width = <24>; - pagesize = <256>; - size = <0x80000>; - spi-max-frequency = <10000000>; - }; - }; - - cfam1_spi1: spi@20 { - compatible = "ibm,spi-fsi"; - reg = <0x20>; - #address-cells = <1>; - #size-cells = <0>; - - eeprom@0 { - compatible = "atmel,at25"; - reg = <0>; - address-width = <24>; - pagesize = <256>; - size = <0x80000>; - spi-max-frequency = <10000000>; - }; - }; - - cfam1_spi2: spi@40 { - compatible = "ibm,spi-fsi"; - reg = <0x40>; - #address-cells = <1>; - #size-cells = <0>; - - eeprom@0 { - compatible = "atmel,at25"; - reg = <0>; - address-width = <24>; - pagesize = <256>; - size = <0x80000>; - spi-max-frequency = <10000000>; - }; - }; - - cfam1_spi3: spi@60 { - compatible = "ibm,spi-fsi"; - reg = <0x60>; - #address-cells = <1>; - #size-cells = <0>; - - eeprom@0 { - compatible = "atmel,at25"; - reg = <0>; - address-width = <24>; - pagesize = <256>; - size = <0x80000>; - spi-max-frequency = <10000000>; - }; - }; - }; - - sbefifo@2400 { - compatible = "ibm,p9-sbefifo"; - reg = <0x2400 0x400>; - - occ { - compatible = "ibm,p10-occ"; - - hwmon { - compatible = "ibm,p10-occ-hwmon"; - ibm,no-poll-on-init; - }; - }; - }; - - fsi@3400 { - compatible = "ibm,p9-fsi-controller"; - reg = <0x3400 0x400>; - #address-cells = <2>; - #size-cells = <0>; - no-scan-on-init; - }; - }; - cfam@2,0 { reg = <2 0>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts index 413b9255f9e3cf..19a8d7b077588c 100644 --- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts +++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts @@ -12,6 +12,17 @@ / { model = "Actiontec MI424WR rev A/C"; compatible = "actiontec,mi424wr-ac", "intel,ixp42x"; + /* Connect the switch to EthC */ + spi { + ethernet-switch@0 { + ethernet-ports { + ethernet-port@4 { + ethernet = <ðc>; + }; + }; + }; + }; + soc { /* EthB used for WAN */ ethernet@c8009000 { diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts index 3619c6411a5c04..244c6ea0973ff8 100644 --- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts +++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts @@ -12,6 +12,17 @@ / { model = "Actiontec MI424WR rev D"; compatible = "actiontec,mi424wr-d", "intel,ixp42x"; + /* Connect the switch to EthB */ + spi { + ethernet-switch@0 { + ethernet-ports { + ethernet-port@4 { + ethernet = <ðb>; + }; + }; + }; + }; + soc { /* EthB used for LAN */ ethernet@c8009000 { diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi index 76fd97c5beb69d..9b54e3c01a3452 100644 --- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi +++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi @@ -152,7 +152,6 @@ ethernet-port@3 { }; ethernet-port@4 { reg = <4>; - ethernet = <ðc>; phy-mode = "mii"; fixed-link { speed = <100>; diff --git a/arch/arm/boot/dts/intel/socfpga/Makefile b/arch/arm/boot/dts/intel/socfpga/Makefile index 7f69a0355ea509..8df0976da01cea 100644 --- a/arch/arm/boot/dts/intel/socfpga/Makefile +++ b/arch/arm/boot/dts/intel/socfpga/Makefile @@ -2,7 +2,30 @@ dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \ socfpga_arria5_socdk.dtb \ socfpga_arria10_chameleonv3.dtb \ - socfpga_arria10_mercury_pe1.dtb \ + socfpga_arria10_mercury_aa1_pe1_emmc.dtb \ + socfpga_arria10_mercury_aa1_pe1_qspi.dtb \ + socfpga_arria10_mercury_aa1_pe1_sdmmc.dtb \ + socfpga_arria10_mercury_aa1_pe3_emmc.dtb \ + socfpga_arria10_mercury_aa1_pe3_qspi.dtb \ + socfpga_arria10_mercury_aa1_pe3_sdmmc.dtb \ + socfpga_arria10_mercury_aa1_st1_emmc.dtb \ + socfpga_arria10_mercury_aa1_st1_qspi.dtb \ + socfpga_arria10_mercury_aa1_st1_sdmmc.dtb \ + socfpga_cyclone5_mercury_sa1_pe1_emmc.dtb \ + socfpga_cyclone5_mercury_sa1_pe1_qspi.dtb \ + socfpga_cyclone5_mercury_sa1_pe1_sdmmc.dtb \ + socfpga_cyclone5_mercury_sa1_pe3_emmc.dtb \ + socfpga_cyclone5_mercury_sa1_pe3_qspi.dtb \ + socfpga_cyclone5_mercury_sa1_pe3_sdmmc.dtb \ + socfpga_cyclone5_mercury_sa1_st1_emmc.dtb \ + socfpga_cyclone5_mercury_sa1_st1_qspi.dtb \ + socfpga_cyclone5_mercury_sa1_st1_sdmmc.dtb \ + socfpga_cyclone5_mercury_sa2_pe1_qspi.dtb \ + socfpga_cyclone5_mercury_sa2_pe1_sdmmc.dtb \ + socfpga_cyclone5_mercury_sa2_pe3_qspi.dtb \ + socfpga_cyclone5_mercury_sa2_pe3_sdmmc.dtb \ + socfpga_cyclone5_mercury_sa2_st1_qspi.dtb \ + socfpga_cyclone5_mercury_sa2_st1_sdmmc.dtb \ socfpga_arria10_socdk_nand.dtb \ socfpga_arria10_socdk_qspi.dtb \ socfpga_arria10_socdk_sdmmc.dtb \ diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1.dtsi index 41f865c8c09858..c80201bce793a9 100644 --- a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1.dtsi +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1.dtsi @@ -7,12 +7,14 @@ / { - model = "Enclustra Mercury AA1"; - compatible = "enclustra,mercury-aa1", "altr,socfpga-arria10", "altr,socfpga"; + model = "Enclustra Mercury+ AA1"; + compatible = "enclustra,mercury-aa1", + "altr,socfpga-arria10", "altr,socfpga"; aliases { ethernet0 = &gmac0; serial1 = &uart1; + spi0 = &qspi; }; memory@0 { @@ -24,52 +26,102 @@ memory@0 { chosen { stdout-path = "serial1:115200n8"; }; + + /* Adjusted the i2c labels to use generic base-board dtsi files for + * Enclustra Arria10 and Cyclone5 SoMs. + * + * The set of i2c0 and i2c1 labels defined in socfpga_cyclone5.dtsi and in + * socfpga_arria10.dtsi do not allow for using the same base-board .dtsi + * fragments. Thus define generic labels here to match the correct i2c + * bus in a generic base-board .dtsi file. + */ + soc { + i2c_encl: i2c@ffc02300 { + }; + i2c_encl_fpga: i2c@ffc02200 { + }; + }; +}; + +&i2c_encl { + status = "okay"; + i2c-sda-hold-time-ns = <300>; + clock-frequency = <100000>; + + atsha204a: crypto@64 { + compatible = "atmel,atsha204a"; + reg = <0x64>; + }; + + isl12022: rtc@6f { + compatible = "isil,isl12022"; + reg = <0x6f>; + }; +}; + +&i2c_encl_fpga { + i2c-sda-hold-time-ns = <300>; + status = "disabled"; }; &gmac0 { - phy-mode = "rgmii"; + status = "okay"; + phy-mode = "rgmii-id"; phy-addr = <0xffffffff>; /* probe for phy addr */ - max-frame-size = <3800>; - phy-handle = <&phy3>; + /delete-property/ mac-address; + mdio { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dwmac-mdio"; phy3: ethernet-phy@3 { - txd0-skew-ps = <0>; /* -420ps */ - txd1-skew-ps = <0>; /* -420ps */ - txd2-skew-ps = <0>; /* -420ps */ - txd3-skew-ps = <0>; /* -420ps */ + reg = <3>; + + /* Add 2ns RX clock delay (1.2ns + 0.78ns)*/ + rxc-skew-ps = <1680>; /* 780ps */ rxd0-skew-ps = <420>; /* 0ps */ rxd1-skew-ps = <420>; /* 0ps */ rxd2-skew-ps = <420>; /* 0ps */ rxd3-skew-ps = <420>; /* 0ps */ - txen-skew-ps = <0>; /* -420ps */ - txc-skew-ps = <1860>; /* 960ps */ rxdv-skew-ps = <420>; /* 0ps */ - rxc-skew-ps = <1680>; /* 780ps */ - reg = <3>; + + /* Add 1.38ns TX clock delay (0.96ns + 0.42ns)*/ + txc-skew-ps = <1860>; /* 960ps */ + txd0-skew-ps = <0>; /* -420ps */ + txd1-skew-ps = <0>; /* -420ps */ + txd2-skew-ps = <0>; /* -420ps */ + txd3-skew-ps = <0>; /* -420ps */ + txen-skew-ps = <0>; /* -420ps */ }; }; }; -&i2c1 { - atsha204a: crypto@64 { - compatible = "atmel,atsha204a"; - reg = <0x64>; - }; +&gpio0 { + status = "okay"; +}; - isl12022: isl12022@6f { - compatible = "isil,isl12022"; - reg = <0x6f>; - }; +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&uart0 { + status = "disabled"; +}; + +&uart1 { + status = "okay"; }; /* Following mappings are taken from arria10 socdk dts */ &mmc { + status = "okay"; cap-sd-highspeed; broken-cd; bus-width = <4>; @@ -79,3 +131,50 @@ &mmc { &osc1 { clock-frequency = <33330000>; }; + +&eccmgr { + sdmmca-ecc@ff8c2c00 { + compatible = "altr,socfpga-sdmmc-ecc"; + reg = <0xff8c2c00 0x400>; + altr,ecc-parent = <&mmc>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH>, + <47 IRQ_TYPE_LEVEL_HIGH>, + <16 IRQ_TYPE_LEVEL_HIGH>, + <48 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&qspi { + status = "okay"; + flash0: flash@0 { + u-boot,dm-pre-reloc; + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + spi-max-frequency = <10000000>; + + cdns,read-delay = <4>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + + partition@raw { + label = "Flash Raw"; + reg = <0x0 0x4000000>; + }; + }; +}; + +&watchdog1 { + status = "disabled"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_emmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_emmc.dts new file mode 100644 index 00000000000000..b6cca0b5fd099c --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_emmc.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +/dts-v1/; + +#include "socfpga_arria10_mercury_aa1.dtsi" +#include "socfpga_enclustra_mercury_pe1.dtsi" +#include "socfpga_enclustra_mercury_bootmode_emmc.dtsi" + +/ { + model = "Enclustra Mercury SA1 on Mercury+ PE1 Base Board"; + compatible = "enclustra,mercury-sa1-pe1", "enclustra,mercury-sa1", + "altr,socfpga-cyclone5", "altr,socfpga"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_qspi.dts new file mode 100644 index 00000000000000..6ad023477cd2c9 --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_qspi.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +/dts-v1/; + +#include "socfpga_arria10_mercury_aa1.dtsi" +#include "socfpga_enclustra_mercury_pe1.dtsi" +#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi" + +/ { + model = "Enclustra Mercury+ AA1 on Mercury+ PE1 Base Board"; + compatible = "enclustra,mercury-aa1-pe1", "enclustra,mercury-aa1", + "altr,socfpga-arria10", "altr,socfpga"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_sdmmc.dts new file mode 100644 index 00000000000000..653c9a86516ba7 --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe1_sdmmc.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +/dts-v1/; + +#include "socfpga_arria10_mercury_aa1.dtsi" +#include "socfpga_enclustra_mercury_pe1.dtsi" +#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi" + +/ { + model = "Enclustra Mercury+ AA1 on Mercury+ PE1 Base Board"; + compatible = "enclustra,mercury-aa1-pe1", "enclustra,mercury-aa1", + "altr,socfpga-arria10", "altr,socfpga"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_emmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_emmc.dts new file mode 100644 index 00000000000000..ae9c7c6a23706a --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_emmc.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +/dts-v1/; + +#include "socfpga_arria10_mercury_aa1.dtsi" +#include "socfpga_enclustra_mercury_pe3.dtsi" +#include "socfpga_enclustra_mercury_bootmode_emmc.dtsi" + +/ { + model = "Enclustra Mercury+ AA1 on Mercury+ PE3 Base Board"; + compatible = "enclustra,mercury-aa1-pe3", "enclustra,mercury-aa1", + "altr,socfpga-arria10", "altr,socfpga"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_qspi.dts new file mode 100644 index 00000000000000..c3a0c30a07a517 --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_qspi.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +/dts-v1/; + +#include "socfpga_arria10_mercury_aa1.dtsi" +#include "socfpga_enclustra_mercury_pe3.dtsi" +#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi" + +/ { + model = "Enclustra Mercury+ AA1 on Mercury+ PE3 Base Board"; + compatible = "enclustra,mercury-aa1-pe3", "enclustra,mercury-aa1", + "altr,socfpga-arria10", "altr,socfpga"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_sdmmc.dts new file mode 100644 index 00000000000000..dc1e1ad20381fa --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_pe3_sdmmc.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +/dts-v1/; + +#include "socfpga_arria10_mercury_aa1.dtsi" +#include "socfpga_enclustra_mercury_pe3.dtsi" +#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi" + +/ { + model = "Enclustra Mercury+ AA1 on Mercury+ PE3 Base Board"; + compatible = "enclustra,mercury-aa1-pe3", "enclustra,mercury-aa1", + "altr,socfpga-arria10", "altr,socfpga"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_emmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_emmc.dts new file mode 100644 index 00000000000000..61d5e4c85d9b9d --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_emmc.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +/dts-v1/; + +#include "socfpga_arria10_mercury_aa1.dtsi" +#include "socfpga_enclustra_mercury_st1.dtsi" +#include "socfpga_enclustra_mercury_bootmode_emmc.dtsi" + +/ { + model = "Enclustra Mercury+ AA1 on Mercury+ ST1 Base Board"; + compatible = "enclustra,mercury-aa1-st1", "enclustra,mercury-aa1", + "altr,socfpga-arria10", "altr,socfpga"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_qspi.dts new file mode 100644 index 00000000000000..a3b99c9b16fd4e --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_qspi.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +/dts-v1/; + +#include "socfpga_arria10_mercury_aa1.dtsi" +#include "socfpga_enclustra_mercury_st1.dtsi" +#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi" + +/ { + model = "Enclustra Mercury+ AA1 on Mercury+ ST1 Base Board"; + compatible = "enclustra,mercury-aa1-st1", "enclustra,mercury-aa1", + "altr,socfpga-arria10", "altr,socfpga"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_sdmmc.dts new file mode 100644 index 00000000000000..5deb289e2b55c2 --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_aa1_st1_sdmmc.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +/dts-v1/; + +#include "socfpga_arria10_mercury_aa1.dtsi" +#include "socfpga_enclustra_mercury_st1.dtsi" +#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi" + +/ { + model = "Enclustra Mercury+ AA1 on Mercury+ ST1 Base Board"; + compatible = "enclustra,mercury-aa1-st1", "enclustra,mercury-aa1", + "altr,socfpga-arria10", "altr,socfpga"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_pe1.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_pe1.dts deleted file mode 100644 index cf533f76a9fd30..00000000000000 --- a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_pe1.dts +++ /dev/null @@ -1,55 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright 2023 Steffen Trumtrar - */ -/dts-v1/; -#include "socfpga_arria10_mercury_aa1.dtsi" - -/ { - model = "Enclustra Mercury+ PE1"; - compatible = "enclustra,mercury-pe1", "enclustra,mercury-aa1", - "altr,socfpga-arria10", "altr,socfpga"; - - aliases { - ethernet0 = &gmac0; - serial0 = &uart0; - serial1 = &uart1; - }; -}; - -&gmac0 { - status = "okay"; -}; - -&gpio0 { - status = "okay"; -}; - -&gpio1 { - status = "okay"; -}; - -&gpio2 { - status = "okay"; -}; - -&i2c1 { - status = "okay"; -}; - -&mmc { - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&usb0 { - status = "okay"; - dr_mode = "host"; -}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1.dtsi new file mode 100644 index 00000000000000..49944f9632f972 --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1.dtsi @@ -0,0 +1,143 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +#include "socfpga_cyclone5.dtsi" + +/ { + model = "Enclustra Mercury SA1"; + compatible = "altr,socfpga-cyclone5", "altr,socfpga"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + ethernet0 = &gmac1; + }; + + /* Adjusted the i2c labels to use generic base-board dtsi files for + * Enclustra Arria10 and Cyclone5 SoMs. + * + * The set of i2c0 and i2c1 labels defined in socfpga_cyclone5.dtsi and in + * socfpga_arria10.dtsi do not allow for using the same base-board .dtsi + * fragments. Thus define generic labels here to match the correct i2c + * bus in a generic base-board .dtsi file. + */ + soc { + i2c_encl: i2c@ffc04000 { + }; + i2c_encl_fpga: i2c@ffc05000 { + }; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x40000000>; /* 1GB */ + }; +}; + +&osc1 { + clock-frequency = <50000000>; +}; + +&i2c_encl { + i2c-sda-hold-time-ns = <300>; + clock-frequency = <100000>; + status = "okay"; + + isl12020: rtc@6f { + compatible = "isil,isl12022"; + reg = <0x6f>; + }; +}; + +&i2c_encl_fpga { + i2c-sda-hold-time-ns = <300>; + status = "disabled"; +}; + +&uart0 { + clock-frequency = <100000000>; +}; + +&mmc0 { + status = "okay"; + /delete-property/ cap-mmc-highspeed; + /delete-property/ cap-sd-highspeed; +}; + +&qspi { + status = "okay"; + + flash0: flash@0 { + u-boot,dm-pre-reloc; + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + spi-max-frequency = <10000000>; + + cdns,read-delay = <4>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + + partition@raw { + label = "Flash Raw"; + reg = <0x0 0x4000000>; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gmac1 { + status = "okay"; + /delete-property/ mac-address; + phy-mode = "rgmii-id"; + phy-handle = <&phy3>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy3: ethernet-phy@3 { + reg = <3>; + + /* Add 2ns RX clock delay (1.2ns + 0.78ns)*/ + rxc-skew-ps = <1680>; + rxd0-skew-ps = <420>; + rxd1-skew-ps = <420>; + rxd2-skew-ps = <420>; + rxd3-skew-ps = <420>; + rxdv-skew-ps = <420>; + + /* Add 1.38ns TX clock delay (0.96ns + 0.42ns)*/ + txc-skew-ps = <1860>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + txen-skew-ps = <0>; + }; + }; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_emmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_emmc.dts new file mode 100644 index 00000000000000..85d6146da0da38 --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_emmc.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +/dts-v1/; + +#include "socfpga_cyclone5_mercury_sa1.dtsi" +#include "socfpga_enclustra_mercury_pe1.dtsi" +#include "socfpga_enclustra_mercury_bootmode_emmc.dtsi" + +/ { + model = "Enclustra Mercury SA1 on Mercury+ PE1 Base Board"; + compatible = "enclustra,mercury-sa1-pe1", "enclustra,mercury-aa1", + "altr,socfpga-arria10", "altr,socfpga"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_qspi.dts new file mode 100644 index 00000000000000..770ab680a18cca --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_qspi.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +/dts-v1/; + +#include "socfpga_cyclone5_mercury_sa1.dtsi" +#include "socfpga_enclustra_mercury_pe1.dtsi" +#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi" + +/ { + model = "Enclustra Mercury SA1 on Mercury+ PE1 Base Board"; + compatible = "enclustra,mercury-sa1-pe1", "enclustra,mercury-sa1", + "altr,socfpga-cyclone5", "altr,socfpga"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_sdmmc.dts new file mode 100644 index 00000000000000..990ca0fec61eac --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe1_sdmmc.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +/dts-v1/; + +#include "socfpga_cyclone5_mercury_sa1.dtsi" +#include "socfpga_enclustra_mercury_pe1.dtsi" +#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi" + +/ { + model = "Enclustra Mercury SA1 on Mercury+ PE1 Base Board"; + compatible = "enclustra,mercury-sa1-pe1", "enclustra,mercury-sa1", + "altr,socfpga-cyclone5", "altr,socfpga"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_emmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_emmc.dts new file mode 100644 index 00000000000000..6c8fd5b0d6ebc4 --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_emmc.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +/dts-v1/; + +#include "socfpga_cyclone5_mercury_sa1.dtsi" +#include "socfpga_enclustra_mercury_pe3.dtsi" +#include "socfpga_enclustra_mercury_bootmode_emmc.dtsi" + +/ { + model = "Enclustra Mercury SA1 on Mercury+ PE3 Base Board"; + compatible = "enclustra,mercury-sa1-pe3", "enclustra,mercury-sa1", + "altr,socfpga-cyclone5", "altr,socfpga"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_qspi.dts new file mode 100644 index 00000000000000..3292426078a188 --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_qspi.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +/dts-v1/; + +#include "socfpga_cyclone5_mercury_sa1.dtsi" +#include "socfpga_enclustra_mercury_pe3.dtsi" +#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi" + +/ { + model = "Enclustra Mercury SA1 on Mercury+ PE3 Base Board"; + compatible = "enclustra,mercury-sa1-pe3", "enclustra,mercury-sa1", + "altr,socfpga-cyclone5", "altr,socfpga"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_sdmmc.dts new file mode 100644 index 00000000000000..1eb10b5244ddc7 --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_pe3_sdmmc.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +/dts-v1/; + +#include "socfpga_cyclone5_mercury_sa1.dtsi" +#include "socfpga_enclustra_mercury_pe3.dtsi" +#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi" + +/ { + model = "Enclustra Mercury SA1 on Mercury+ PE3 Base Board"; + compatible = "enclustra,mercury-sa1-pe3", "enclustra,mercury-sa1", + "altr,socfpga-cyclone5", "altr,socfpga"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_emmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_emmc.dts new file mode 100644 index 00000000000000..8c97b5b3adeaf1 --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_emmc.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +/dts-v1/; + +#include "socfpga_cyclone5_mercury_sa1.dtsi" +#include "socfpga_enclustra_mercury_st1.dtsi" +#include "socfpga_enclustra_mercury_bootmode_emmc.dtsi" + +/ { + model = "Enclustra Mercury SA1 on Mercury+ ST1 Base Board"; + compatible = "enclustra,mercury-sa1-st1", "enclustra,mercury-sa1", + "altr,socfpga-cyclone5", "altr,socfpga"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_qspi.dts new file mode 100644 index 00000000000000..e6d14b22e41d49 --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_qspi.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +/dts-v1/; + +#include "socfpga_cyclone5_mercury_sa1.dtsi" +#include "socfpga_enclustra_mercury_st1.dtsi" +#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi" + +/ { + model = "Enclustra Mercury SA1 on Mercury+ ST1 Base Board"; + compatible = "enclustra,mercury-sa1-st1", "enclustra,mercury-sa1", + "altr,socfpga-cyclone5", "altr,socfpga"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_sdmmc.dts new file mode 100644 index 00000000000000..beaeca94d4df0e --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa1_st1_sdmmc.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +/dts-v1/; + +#include "socfpga_cyclone5_mercury_sa1.dtsi" +#include "socfpga_enclustra_mercury_st1.dtsi" +#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi" + +/ { + model = "Enclustra Mercury SA1 on Mercury+ ST1 Base Board"; + compatible = "enclustra,mercury-sa1-st1", "enclustra,mercury-sa1", + "altr,socfpga-cyclone5", "altr,socfpga"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2.dtsi new file mode 100644 index 00000000000000..0b28964e03781c --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2.dtsi @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +#include "socfpga_cyclone5.dtsi" + +/ { + model = "Enclustra Mercury+ SA2"; + compatible = "altr,socfpga-cyclone5", "altr,socfpga"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + ethernet0 = &gmac1; + }; + + /* Adjusted the i2c labels to use generic base-board dtsi files for + * Enclustra Arria10 and Cyclone5 SoMs. + * + * The set of i2c0 and i2c1 labels defined in socfpga_cyclone5.dtsi and in + * socfpga_arria10.dtsi do not allow for using the same base-board .dtsi + * fragments. Thus define generic labels here to match the correct i2c + * bus in a generic base-board .dtsi file. + */ + soc { + i2c_encl: i2c@ffc04000 { + }; + i2c_encl_fpga: i2c@ffc05000 { + }; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x80000000>; /* 2GB */ + }; +}; + +&osc1 { + clock-frequency = <50000000>; +}; + +&i2c_encl { + i2c-sda-hold-time-ns = <300>; + clock-frequency = <100000>; + status = "okay"; + + isl12020: rtc@6f { + compatible = "isil,isl12022"; + reg = <0x6f>; + }; + + atsha204a: crypto@64 { + compatible = "atmel,atsha204a"; + reg = <0x64>; + }; +}; + +&i2c_encl_fpga { + i2c-sda-hold-time-ns = <300>; + status = "disabled"; +}; + +&uart0 { + clock-frequency = <100000000>; +}; + +&mmc0 { + status = "okay"; +}; + +&qspi { + status = "okay"; + + flash0: flash@0 { + u-boot,dm-pre-reloc; + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + spi-max-frequency = <10000000>; + + cdns,read-delay = <4>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + + partition@raw { + label = "Flash Raw"; + reg = <0x0 0x4000000>; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gmac1 { + status = "okay"; + /delete-property/ mac-address; + phy-mode = "rgmii-id"; + phy-handle = <&phy3>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy3: ethernet-phy@3 { + reg = <3>; + + /* Add 2ns RX clock delay (1.2ns + 0.78ns)*/ + rxc-skew-ps = <1680>; + rxd0-skew-ps = <420>; + rxd1-skew-ps = <420>; + rxd2-skew-ps = <420>; + rxd3-skew-ps = <420>; + rxdv-skew-ps = <420>; + + /* Add 1.38ns TX clock delay (0.96ns + 0.42ns)*/ + txc-skew-ps = <1860>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + txen-skew-ps = <0>; + }; + }; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe1_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe1_qspi.dts new file mode 100644 index 00000000000000..6f79d9ed1d366e --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe1_qspi.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +/dts-v1/; + +#include "socfpga_cyclone5_mercury_sa2.dtsi" +#include "socfpga_enclustra_mercury_pe1.dtsi" +#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi" + +/ { + model = "Enclustra Mercury+ SA2 on Mercury+ PE1 Base Board"; + compatible = "enclustra,mercury-sa2-pe1", "enclustra,mercury-sa2", + "altr,socfpga-cyclone5", "altr,socfpga"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe1_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe1_sdmmc.dts new file mode 100644 index 00000000000000..b94bd8bafc26fa --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe1_sdmmc.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +/dts-v1/; + +#include "socfpga_cyclone5_mercury_sa2.dtsi" +#include "socfpga_enclustra_mercury_pe1.dtsi" +#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi" + +/ { + model = "Enclustra Mercury+ SA2 on Mercury+ PE1 Base Board"; + compatible = "enclustra,mercury-sa2-pe1", "enclustra,mercury-sa2", + "altr,socfpga-cyclone5", "altr,socfpga"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe3_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe3_qspi.dts new file mode 100644 index 00000000000000..51fc4a22937a55 --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe3_qspi.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +/dts-v1/; + +#include "socfpga_cyclone5_mercury_sa2.dtsi" +#include "socfpga_enclustra_mercury_pe3.dtsi" +#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi" + +/ { + model = "Enclustra Mercury+ SA2 on Mercury+ PE3 Base Board"; + compatible = "enclustra,mercury-sa2-pe3", "enclustra,mercury-sa2", + "altr,socfpga-cyclone5", "altr,socfpga"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe3_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe3_sdmmc.dts new file mode 100644 index 00000000000000..e4209209f4fad2 --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_pe3_sdmmc.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +/dts-v1/; + +#include "socfpga_cyclone5_mercury_sa2.dtsi" +#include "socfpga_enclustra_mercury_pe3.dtsi" +#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi" + +/ { + model = "Enclustra Mercury+ SA2 on Mercury+ PE3 Base Board"; + compatible = "enclustra,mercury-sa2-pe3", "enclustra,mercury-sa2", + "altr,socfpga-cyclone5", "altr,socfpga"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_st1_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_st1_qspi.dts new file mode 100644 index 00000000000000..ab4549a0d4554f --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_st1_qspi.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +/dts-v1/; + +#include "socfpga_cyclone5_mercury_sa2.dtsi" +#include "socfpga_enclustra_mercury_st1.dtsi" +#include "socfpga_enclustra_mercury_bootmode_qspi.dtsi" + +/ { + model = "Enclustra Mercury+ SA2 on Mercury+ ST1 Base Board"; + compatible = "enclustra,mercury-sa2-st1", "enclustra,mercury-sa2", + "altr,socfpga-cyclone5", "altr,socfpga"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_st1_sdmmc.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_st1_sdmmc.dts new file mode 100644 index 00000000000000..ebe62879c3fbe2 --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_mercury_sa2_st1_sdmmc.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +/dts-v1/; + +#include "socfpga_cyclone5_mercury_sa2.dtsi" +#include "socfpga_enclustra_mercury_st1.dtsi" +#include "socfpga_enclustra_mercury_bootmode_sdmmc.dtsi" + +/ { + model = "Enclustra Mercury+ SA2 on Mercury+ ST1 Base Board"; + compatible = "enclustra,mercury-sa2-st1", "enclustra,mercury-sa2", + "altr,socfpga-cyclone5", "altr,socfpga"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_emmc.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_emmc.dtsi new file mode 100644 index 00000000000000..d79cb64da0de76 --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_emmc.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +&qspi { + status = "disabled"; +}; + +&mmc { + bus-width = <8>; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_qspi.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_qspi.dtsi new file mode 100644 index 00000000000000..5ba21dd8f5ba16 --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_qspi.dtsi @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +&mmc { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_sdmmc.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_sdmmc.dtsi new file mode 100644 index 00000000000000..2b102e0b6217af --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_bootmode_sdmmc.dtsi @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +&qspi { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe1.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe1.dtsi new file mode 100644 index 00000000000000..abc4bfb7fccf08 --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe1.dtsi @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +&i2c_encl { + status = "okay"; + + eeprom@57 { + status = "okay"; + compatible = "microchip,24c128"; + reg = <0x57>; + pagesize = <64>; + label = "user eeprom"; + address-width = <16>; + }; + + lm96080: temperature-sensor@2f { + status = "okay"; + compatible = "national,lm80"; + reg = <0x2f>; + }; + + si5338: clock-controller@70 { + compatible = "silabs,si5338"; + reg = <0x70>; + }; + +}; + +&i2c_encl_fpga { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe3.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe3.dtsi new file mode 100644 index 00000000000000..bc57b0680878ec --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_pe3.dtsi @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +&i2c_encl { + i2c-mux@74 { + status = "okay"; + compatible = "nxp,pca9547"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@56 { + status = "okay"; + compatible = "microchip,24c128"; + reg = <0x56>; + pagesize = <64>; + label = "user eeprom"; + address-width = <16>; + }; + + lm96080: temperature-sensor@2f { + status = "okay"; + compatible = "national,lm80"; + reg = <0x2f>; + }; + + pcal6416: gpio@20 { + status = "okay"; + compatible = "nxp,pcal6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; +}; + +&i2c_encl_fpga { + status = "okay"; + + i2c-mux@75 { + status = "okay"; + compatible = "nxp,pca9547"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + }; +}; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_st1.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_st1.dtsi new file mode 100644 index 00000000000000..4c00475f430303 --- /dev/null +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_enclustra_mercury_st1.dtsi @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2024 Enclustra GmbH - https://www.enclustra.com + */ + +&i2c_encl { + si5338: clock-controller@70 { + compatible = "silabs,si5338"; + reg = <0x70>; + }; +}; + +&i2c_encl_fpga { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/marvell/armada-38x.dtsi b/arch/arm/boot/dts/marvell/armada-38x.dtsi index 1181b13deabc6f..1d616edda322d6 100644 --- a/arch/arm/boot/dts/marvell/armada-38x.dtsi +++ b/arch/arm/boot/dts/marvell/armada-38x.dtsi @@ -247,7 +247,7 @@ nand_pins: nand-pins { marvell,function = "dev"; }; - nand_rb: nand-rb { + nand_rb: nand-rb-pins { marvell,pins = "mpp41"; marvell,function = "nand"; }; diff --git a/arch/arm/boot/dts/marvell/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/marvell/armada-xp-98dx3236.dtsi index 7a7e2066c498a2..a9a71326aafcb0 100644 --- a/arch/arm/boot/dts/marvell/armada-xp-98dx3236.dtsi +++ b/arch/arm/boot/dts/marvell/armada-xp-98dx3236.dtsi @@ -322,7 +322,7 @@ nand_pins: nand-pins { marvell,function = "dev"; }; - nand_rb: nand-rb { + nand_rb: nand-rb-pins { marvell,pins = "mpp19"; marvell,function = "nand"; }; diff --git a/arch/arm/boot/dts/mediatek/Makefile b/arch/arm/boot/dts/mediatek/Makefile index e48de3efeb3b9a..37c4cded0eae8c 100644 --- a/arch/arm/boot/dts/mediatek/Makefile +++ b/arch/arm/boot/dts/mediatek/Makefile @@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt6572-jty-d101.dtb \ mt6572-lenovo-a369i.dtb \ mt6580-evbp1.dtb \ + mt6582-alcatel-yarisxl.dtb \ mt6582-prestigio-pmt5008-3g.dtb \ mt6589-aquaris5.dtb \ mt6589-fairphone-fp1.dtb \ diff --git a/arch/arm/boot/dts/mediatek/mt2701.dtsi b/arch/arm/boot/dts/mediatek/mt2701.dtsi index ce6a4015fed5ad..128b87229f3d59 100644 --- a/arch/arm/boot/dts/mediatek/mt2701.dtsi +++ b/arch/arm/boot/dts/mediatek/mt2701.dtsi @@ -597,7 +597,7 @@ larb1: larb@16010000 { }; hifsys: syscon@1a000000 { - compatible = "mediatek,mt2701-hifsys", "syscon"; + compatible = "mediatek,mt2701-hifsys"; reg = <0 0x1a000000 0 0x1000>; #clock-cells = <1>; #reset-cells = <1>; diff --git a/arch/arm/boot/dts/mediatek/mt6582-alcatel-yarisxl.dts b/arch/arm/boot/dts/mediatek/mt6582-alcatel-yarisxl.dts new file mode 100644 index 00000000000000..f55d8edad1acfe --- /dev/null +++ b/arch/arm/boot/dts/mediatek/mt6582-alcatel-yarisxl.dts @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2025 Cristian Cozzolino + */ + +/dts-v1/; +#include "mt6582.dtsi" + +/ { + model = "Alcatel One Touch Pop C7 (OT-7041D)"; + compatible = "alcatel,yarisxl", "mediatek,mt6582"; + + aliases { + serial0 = &uart0; + }; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + stdout-path = "serial0:921600n8"; + + framebuffer: framebuffer@9fa00000 { + compatible = "simple-framebuffer"; + memory-region = <&framebuffer_reserved>; + width = <480>; + height = <854>; + stride = <(480 * 4)>; + format = "r5g6b5"; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + connsys@9f900000 { + reg = <0x9f900000 0x100000>; + no-map; + }; + + modem@9e000000 { + reg = <0x9e000000 0x1800000>; + no-map; + }; + + framebuffer_reserved: framebuffer@9fa00000 { + reg = <0x9fa00000 0x600000>; + no-map; + }; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/mediatek/mt6582.dtsi b/arch/arm/boot/dts/mediatek/mt6582.dtsi index 4263371784cd15..f941ea44898a9f 100644 --- a/arch/arm/boot/dts/mediatek/mt6582.dtsi +++ b/arch/arm/boot/dts/mediatek/mt6582.dtsi @@ -9,12 +9,12 @@ / { #address-cells = <1>; #size-cells = <1>; - compatible = "mediatek,mt6582"; interrupt-parent = <&sysirq>; cpus { - #address-cells = <1>; #size-cells = <0>; + #address-cells = <1>; + enable-method = "mediatek,mt6589-smp"; cpu@0 { device_type = "cpu"; @@ -38,91 +38,95 @@ cpu@3 { }; }; - system_clk: dummy13m { + uart_clk: dummy26m { compatible = "fixed-clock"; - clock-frequency = <13000000>; #clock-cells = <0>; + clock-frequency = <26000000>; }; - rtc_clk: dummy32k { + system_clk: dummy13m { compatible = "fixed-clock"; - clock-frequency = <32000>; #clock-cells = <0>; + clock-frequency = <13000000>; }; - uart_clk: dummy26m { + rtc_clk: dummy32k { compatible = "fixed-clock"; - clock-frequency = <26000000>; #clock-cells = <0>; + clock-frequency = <32000>; }; - timer: timer@11008000 { - compatible = "mediatek,mt6577-timer"; - reg = <0x10008000 0x80>; - interrupts = ; - clocks = <&system_clk>, <&rtc_clk>; - clock-names = "system-clk", "rtc-clk"; - }; + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; - sysirq: interrupt-controller@10200100 { - compatible = "mediatek,mt6582-sysirq", - "mediatek,mt6577-sysirq"; - interrupt-controller; - #interrupt-cells = <3>; - interrupt-parent = <&gic>; - reg = <0x10200100 0x1c>; - }; + watchdog: watchdog@10007000 { + compatible = "mediatek,mt6582-wdt", "mediatek,mt6589-wdt"; + reg = <0x10007000 0x100>; + }; - gic: interrupt-controller@10211000 { - compatible = "arm,cortex-a7-gic"; - interrupt-controller; - #interrupt-cells = <3>; - interrupt-parent = <&gic>; - reg = <0x10211000 0x1000>, - <0x10212000 0x2000>, - <0x10214000 0x2000>, - <0x10216000 0x2000>; - }; + timer: timer@10008000 { + compatible = "mediatek,mt6582-timer", "mediatek,mt6577-timer"; + reg = <0x10008000 0x80>; + interrupts = ; + clocks = <&system_clk>, <&rtc_clk>; + }; - uart0: serial@11002000 { - compatible = "mediatek,mt6582-uart", - "mediatek,mt6577-uart"; - reg = <0x11002000 0x400>; - interrupts = ; - clocks = <&uart_clk>; - status = "disabled"; - }; + sysirq: interrupt-controller@10200100 { + compatible = "mediatek,mt6582-sysirq", "mediatek,mt6577-sysirq"; + reg = <0x10200100 0x1c>; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <3>; + }; - uart1: serial@11003000 { - compatible = "mediatek,mt6582-uart", - "mediatek,mt6577-uart"; - reg = <0x11003000 0x400>; - interrupts = ; - clocks = <&uart_clk>; - status = "disabled"; - }; + gic: interrupt-controller@10211000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&gic>; + reg = <0x10211000 0x1000>, + <0x10212000 0x2000>, + <0x10214000 0x2000>, + <0x10216000 0x2000>; + }; - uart2: serial@11004000 { - compatible = "mediatek,mt6582-uart", - "mediatek,mt6577-uart"; - reg = <0x11004000 0x400>; - interrupts = ; - clocks = <&uart_clk>; - status = "disabled"; - }; + uart0: serial@11002000 { + compatible = "mediatek,mt6582-uart", "mediatek,mt6577-uart"; + reg = <0x11002000 0x400>; + interrupts = ; + clocks = <&uart_clk>; + clock-names = "baud"; + status = "disabled"; + }; - uart3: serial@11005000 { - compatible = "mediatek,mt6582-uart", - "mediatek,mt6577-uart"; - reg = <0x11005000 0x400>; - interrupts = ; - clocks = <&uart_clk>; - status = "disabled"; - }; + uart1: serial@11003000 { + compatible = "mediatek,mt6582-uart", "mediatek,mt6577-uart"; + reg = <0x11003000 0x400>; + interrupts = ; + clocks = <&uart_clk>; + clock-names = "baud"; + status = "disabled"; + }; - watchdog: watchdog@10007000 { - compatible = "mediatek,mt6582-wdt", - "mediatek,mt6589-wdt"; - reg = <0x10007000 0x100>; + uart2: serial@11004000 { + compatible = "mediatek,mt6582-uart", "mediatek,mt6577-uart"; + reg = <0x11004000 0x400>; + interrupts = ; + clocks = <&uart_clk>; + clock-names = "baud"; + status = "disabled"; + }; + + uart3: serial@11005000 { + compatible = "mediatek,mt6582-uart", "mediatek,mt6577-uart"; + reg = <0x11005000 0x400>; + interrupts = ; + clocks = <&uart_clk>; + clock-names = "baud"; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/mediatek/mt7623.dtsi b/arch/arm/boot/dts/mediatek/mt7623.dtsi index fd7a89cc337d69..4b1685b9398919 100644 --- a/arch/arm/boot/dts/mediatek/mt7623.dtsi +++ b/arch/arm/boot/dts/mediatek/mt7623.dtsi @@ -744,8 +744,7 @@ vdecsys: syscon@16000000 { hifsys: syscon@1a000000 { compatible = "mediatek,mt7623-hifsys", - "mediatek,mt2701-hifsys", - "syscon"; + "mediatek,mt2701-hifsys"; reg = <0 0x1a000000 0 0x1000>; #clock-cells = <1>; #reset-cells = <1>; diff --git a/arch/arm/boot/dts/microchip/sama5d2.dtsi b/arch/arm/boot/dts/microchip/sama5d2.dtsi index 17430d7f20555f..fde890f18d201b 100644 --- a/arch/arm/boot/dts/microchip/sama5d2.dtsi +++ b/arch/arm/boot/dts/microchip/sama5d2.dtsi @@ -571,7 +571,7 @@ AT91_XDMAC_DT_PERID(11))>, AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(12))>; dma-names = "tx", "rx"; - atmel,fifo-size = <16>; + atmel,fifo-size = <32>; status = "disabled"; }; @@ -642,7 +642,7 @@ AT91_XDMAC_DT_PERID(13))>, AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(14))>; dma-names = "tx", "rx"; - atmel,fifo-size = <16>; + atmel,fifo-size = <32>; status = "disabled"; }; @@ -854,7 +854,7 @@ AT91_XDMAC_DT_PERID(15))>, AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(16))>; dma-names = "tx", "rx"; - atmel,fifo-size = <16>; + atmel,fifo-size = <32>; status = "disabled"; }; @@ -925,7 +925,7 @@ AT91_XDMAC_DT_PERID(17))>, AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(18))>; dma-names = "tx", "rx"; - atmel,fifo-size = <16>; + atmel,fifo-size = <32>; status = "disabled"; }; @@ -997,7 +997,7 @@ AT91_XDMAC_DT_PERID(19))>, AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(20))>; dma-names = "tx", "rx"; - atmel,fifo-size = <16>; + atmel,fifo-size = <32>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/microchip/sama7d65.dtsi b/arch/arm/boot/dts/microchip/sama7d65.dtsi index e53e2dd6d530c0..cd2cf9a6f40b86 100644 --- a/arch/arm/boot/dts/microchip/sama7d65.dtsi +++ b/arch/arm/boot/dts/microchip/sama7d65.dtsi @@ -557,7 +557,7 @@ uart4: serial@200 { dma-names = "tx", "rx"; atmel,use-dma-rx; atmel,use-dma-tx; - atmel,fifo-size = <16>; + atmel,fifo-size = <32>; atmel,usart-mode = ; status = "disabled"; }; @@ -618,7 +618,7 @@ uart6: serial@200 { clocks = <&pmc PMC_TYPE_PERIPHERAL 40>; clock-names = "usart"; atmel,usart-mode = ; - atmel,fifo-size = <16>; + atmel,fifo-size = <32>; status = "disabled"; }; }; @@ -643,7 +643,7 @@ uart7: serial@200 { dma-names = "tx", "rx"; atmel,use-dma-rx; atmel,use-dma-tx; - atmel,fifo-size = <16>; + atmel,fifo-size = <32>; atmel,usart-mode = ; status = "disabled"; }; diff --git a/arch/arm/boot/dts/microchip/sama7g5.dtsi b/arch/arm/boot/dts/microchip/sama7g5.dtsi index 381cbcfcb34a14..03ef3d9aaeec62 100644 --- a/arch/arm/boot/dts/microchip/sama7g5.dtsi +++ b/arch/arm/boot/dts/microchip/sama7g5.dtsi @@ -824,7 +824,7 @@ uart4: serial@200 { dma-names = "tx", "rx"; atmel,use-dma-rx; atmel,use-dma-tx; - atmel,fifo-size = <16>; + atmel,fifo-size = <32>; status = "disabled"; }; }; @@ -850,7 +850,7 @@ uart7: serial@200 { dma-names = "tx", "rx"; atmel,use-dma-rx; atmel,use-dma-tx; - atmel,fifo-size = <16>; + atmel,fifo-size = <32>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/nvidia/Makefile b/arch/arm/boot/dts/nvidia/Makefile index 2ed2d923c8f923..faf591485ada7d 100644 --- a/arch/arm/boot/dts/nvidia/Makefile +++ b/arch/arm/boot/dts/nvidia/Makefile @@ -11,7 +11,8 @@ dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \ tegra124-nyan-big.dtb \ tegra124-nyan-big-fhd.dtb \ tegra124-nyan-blaze.dtb \ - tegra124-venice2.dtb + tegra124-venice2.dtb \ + tegra124-xiaomi-mocha.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ tegra20-acer-a500-picasso.dtb \ tegra20-asus-sl101.dtb \ diff --git a/arch/arm/boot/dts/nvidia/tegra114.dtsi b/arch/arm/boot/dts/nvidia/tegra114.dtsi index a2a50f959927dd..a98667641be202 100644 --- a/arch/arm/boot/dts/nvidia/tegra114.dtsi +++ b/arch/arm/boot/dts/nvidia/tegra114.dtsi @@ -48,6 +48,45 @@ host1x@50000000 { ranges = <0x54000000 0x54000000 0x01000000>; + vi@54080000 { + compatible = "nvidia,tegra114-vi"; + reg = <0x54080000 0x00040000>; + interrupts = ; + clocks = <&tegra_car TEGRA114_CLK_VI>; + resets = <&tegra_car 20>; + reset-names = "vi"; + + iommus = <&mc TEGRA_SWGROUP_VI>; + + status = "disabled"; + }; + + epp@540c0000 { + compatible = "nvidia,tegra114-epp"; + reg = <0x540c0000 0x00040000>; + interrupts = ; + clocks = <&tegra_car TEGRA114_CLK_EPP>; + resets = <&tegra_car TEGRA114_CLK_EPP>; + reset-names = "epp"; + + iommus = <&mc TEGRA_SWGROUP_EPP>; + + status = "disabled"; + }; + + isp@54100000 { + compatible = "nvidia,tegra114-isp"; + reg = <0x54100000 0x00040000>; + interrupts = ; + clocks = <&tegra_car TEGRA114_CLK_ISP>; + resets = <&tegra_car TEGRA114_CLK_ISP>; + reset-names = "isp"; + + iommus = <&mc TEGRA_SWGROUP_ISP>; + + status = "disabled"; + }; + gr2d@54140000 { compatible = "nvidia,tegra114-gr2d"; reg = <0x54140000 0x00040000>; @@ -150,6 +189,31 @@ dsib: dsi@54400000 { #address-cells = <1>; #size-cells = <0>; }; + + msenc@544c0000 { + compatible = "nvidia,tegra114-msenc"; + reg = <0x544c0000 0x00040000>; + interrupts = ; + clocks = <&tegra_car TEGRA114_CLK_MSENC>; + resets = <&tegra_car TEGRA114_CLK_MSENC>; + reset-names = "mpe"; + + iommus = <&mc TEGRA_SWGROUP_MSENC>; + + status = "disabled"; + }; + + tsec@54500000 { + compatible = "nvidia,tegra114-tsec"; + reg = <0x54500000 0x00040000>; + interrupts = ; + clocks = <&tegra_car TEGRA114_CLK_TSEC>; + resets = <&tegra_car TEGRA114_CLK_TSEC>; + + iommus = <&mc TEGRA_SWGROUP_TSEC>; + + status = "disabled"; + }; }; gic: interrupt-controller@50041000 { diff --git a/arch/arm/boot/dts/nvidia/tegra124-xiaomi-mocha.dts b/arch/arm/boot/dts/nvidia/tegra124-xiaomi-mocha.dts new file mode 100644 index 00000000000000..18c9cdf45eca83 --- /dev/null +++ b/arch/arm/boot/dts/nvidia/tegra124-xiaomi-mocha.dts @@ -0,0 +1,2790 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include +#include +#include +#include +#include + +#include "tegra124.dtsi" + +/ { + model = "Xiaomi Mi Pad A0101"; + compatible = "xiaomi,mocha", "nvidia,tegra124"; + chassis-type = "tablet"; + + aliases { + mmc0 = &sdmmc4; /* eMMC */ + mmc1 = &sdmmc3; /* uSD slot */ + mmc2 = &sdmmc1; /* WiFi */ + + rtc0 = &palmas; + rtc1 = "/rtc@7000e000"; + + serial0 = &uartd; /* Console */ + serial1 = &uartc; /* Bluetooth */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@80000000 { + reg = <0 0x80000000 0 0x80000000>; + }; + + host1x@50000000 { + dsia: dsi@54300000 { + status = "okay"; + + avdd-dsi-csi-supply = <&avdd_dsi_csi>; + nvidia,ganged-mode = <&dsib>; + + panel@0 { + compatible = "sharp,lq079l1sx01"; + reg = <0>; + + reset-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_LOW>; + + avdd-supply = <&avdd_lcd>; + vddio-supply = <&vdd_lcd_io>; + + vsp-supply = <&vsp_5v5_lcd>; + vsn-supply = <&vsn_5v5_lcd>; + + backlight = <&lp8556>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + panel_link0: endpoint { + remote-endpoint = <&dsia_out>; + }; + }; + + port@1 { + reg = <1>; + + panel_link1: endpoint { + remote-endpoint = <&dsib_out>; + }; + }; + }; + }; + + port { + dsia_out: endpoint { + remote-endpoint = <&panel_link0>; + }; + }; + }; + + dsib: dsi@54400000 { + status = "okay"; + + avdd-dsi-csi-supply = <&avdd_dsi_csi>; + + port { + dsib_out: endpoint { + remote-endpoint = <&panel_link1>; + }; + }; + }; + }; + + gpu@57000000 { + vdd-supply = <&vdd_gpu>; + }; + + clock@60006000 { + emc-timings-0 { + nvidia,ram-code = <0>; + + timing-12750000 { + clock-frequency = <12750000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + + timing-20400000 { + clock-frequency = <20400000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + + timing-40800000 { + clock-frequency = <40800000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + + timing-68000000 { + clock-frequency = <68000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + + timing-102000000 { + clock-frequency = <102000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + + timing-204000000 { + clock-frequency = <204000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + + timing-300000000 { + clock-frequency = <300000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C>; + clock-names = "emc-parent"; + }; + + timing-396000000 { + clock-frequency = <396000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M>; + clock-names = "emc-parent"; + }; + + timing-528000000 { + clock-frequency = <528000000>; + nvidia,parent-clock-frequency = <528000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + + timing-600000000 { + clock-frequency = <600000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>; + clock-names = "emc-parent"; + }; + + timing-792000000 { + clock-frequency = <792000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + + timing-924000000 { + clock-frequency = <924000000>; + nvidia,parent-clock-frequency = <924000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + }; + }; + + pinmux@70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + /* Keys pinmux */ + keys { + nvidia,pins = "kb_col0_pq0", + "kb_col6_pq6", + "kb_col7_pq7"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + hall-front { + nvidia,pins = "pi5"; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + hall-back { + nvidia,pins = "gpio_w3_aud_pw3"; + nvidia,function = "spi1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* Leds pinmux */ + bl-en { + nvidia,pins = "pbb4"; + nvidia,function = "vgp4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + keys-led { + nvidia,pins = "ph1"; + nvidia,function = "pwm1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + rgb-led-en { + nvidia,pins = "pg7"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* Panel pinmux */ + lcd-rst { + nvidia,pins = "ph3"; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + lcd-vsp-en { + nvidia,pins = "pi4"; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + lcd-vsn-en { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + lcd-id { + nvidia,pins = "kb_row6_pr6"; + nvidia,function = "displaya_alt"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + lcd-pwm { + nvidia,pins = "ph2"; + nvidia,function = "pwm2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* SDMMC1 pinmux */ + sdmmc1-clk { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + sdmmc1-cmd { + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* SDMMC3 pinmux */ + sdmmc3-clk { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + sdmmc3-cmd { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", + "sdmmc3_clk_lb_out_pee4", + "sdmmc3_clk_lb_in_pee5"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + sdmmc3-cd { + nvidia,pins = "sdmmc3_cd_n_pv2"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + usd-pwr { + nvidia,pins = "kb_row0_pr0"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* SDMMC4 pinmux */ + sdmmc4-clk { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + sdmmc4-cmd { + nvidia,pins = "sdmmc4_cmd_pt7", + "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* UART-B pinmux */ + uartb-cts { + nvidia,pins = "uart2_cts_n_pj5"; + nvidia,function = "uartb"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + uartb-rts { + nvidia,pins = "uart2_rts_n_pj6"; + nvidia,function = "uartb"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + uartb-rxd { + nvidia,pins = "uart2_rxd_pc3"; + nvidia,function = "irda"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + uartb-txd { + nvidia,pins = "uart2_txd_pc2"; + nvidia,function = "irda"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* UART-C pinmux */ + uartc-cts-rxd { + nvidia,pins = "uart3_cts_n_pa1", + "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + uartc-rts-txd { + nvidia,pins = "uart3_rts_n_pc0", + "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* UART-D pinmux */ + uartd-txd { + nvidia,pins = "pj7"; + nvidia,function = "uartd"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + uartd-rxd { + nvidia,pins = "pb0"; + nvidia,function = "uartd"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* I2C pinmux */ + gen1-i2c { + nvidia,pins = "gen1_i2c_sda_pc5", + "gen1_i2c_scl_pc4"; + nvidia,function = "i2c1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,lock = ; + nvidia,open-drain = ; + }; + + gen2-i2c { + nvidia,pins = "gen2_i2c_scl_pt5", + "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,lock = ; + nvidia,open-drain = ; + }; + + cam-i2c { + nvidia,pins = "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,lock = ; + nvidia,open-drain = ; + }; + + ddc-i2c { + nvidia,pins = "ddc_scl_pv4", + "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + pwr-i2c { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,open-drain = ; + }; + + ts-irq { + nvidia,pins = "kb_row7_pr7"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + ts-rst { + nvidia,pins = "pk4"; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + ts-en { + nvidia,pins = "pk1"; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + hapt-en { + nvidia,pins = "pg6"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + charger-irq { + nvidia,pins = "pj0"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + bat-irq { + nvidia,pins = "kb_col5_pq5"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + compass-rst { + nvidia,pins = "kb_col4_pq4"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + als-irq { + nvidia,pins = "gpio_x3_aud_px3"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + therm-irq { + nvidia,pins = "pi6"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + wlan-reg-on { + nvidia,pins = "gpio_x7_aud_px7"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + wlan-host-wake { + nvidia,pins = "pu5"; + nvidia,function = "pwm2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + bt-reg-on { + nvidia,pins = "kb_row1_pr1"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + bt-host-wake { + nvidia,pins = "pu6"; + nvidia,function = "rsvd3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + bt-dev-wake { + nvidia,pins = "clk3_req_pee1"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + imu-irq { + nvidia,pins = "kb_row3_pr3"; + nvidia,function = "kbc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + imu-sync { + nvidia,pins = "kb_row8_ps0"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + cdc-mclk1 { + nvidia,pins = "dap_mclk1_pw4"; + nvidia,function = "rsvd3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + cdc-din { + nvidia,pins = "dap1_din_pn1", + "dap1_fs_pn0", + "dap1_sclk_pn3"; + nvidia,function = "i2s0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + cdc-dout { + nvidia,pins = "dap1_dout_pn2"; + nvidia,function = "i2s0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + spkr-rl-rst { + nvidia,pins = "dap2_din_pa4"; + nvidia,function = "i2s1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + spkr-rl-irq { + nvidia,pins = "dap2_fs_pa2", + "dap2_sclk_pa3"; + nvidia,function = "i2s1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + dvfs-pwm { + nvidia,pins = "dvfs_pwm_px0"; + nvidia,function = "cldvfs"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + dvfs-clk { + nvidia,pins = "dvfs_clk_px2"; + nvidia,function = "cldvfs"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + cam-mclk { + nvidia,pins = "cam_mclk_pcc0"; + nvidia,function = "vi_alt3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + cam-mclk2 { + nvidia,pins = "pbb0"; + nvidia,function = "vimclk2_alt"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + vbrtr-pwm { + nvidia,pins = "ph0"; + nvidia,function = "pwm0"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + soc-pins { + nvidia,pins = "pj2", "kb_row15_ps7", + "clk_32k_out_pa0"; + nvidia,function = "soc"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + clk-32k-in { + nvidia,pins = "clk_32k_in"; + nvidia,function = "clk"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + core-pwr-req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "pwron"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + cpu-pwr-req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "cpu"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + pwr-int-n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + reset-out-n { + nvidia,pins = "reset_out_n"; + nvidia,function = "reset_out_n"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + lcd-id-det0 { + nvidia,pins = "pi7"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + cdc-rst { + nvidia,pins = "gpio_x5_aud_px5"; + nvidia,function = "spi1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + cdc-det-irq { + nvidia,pins = "gpio_w2_aud_pw2"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + hph-pa-sd { + nvidia,pins = "gpio_x1_aud_px1"; + nvidia,function = "spi6"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + hph-en { + nvidia,pins = "kb_row2_pr2"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + cam-rear-rst-n { + nvidia,pins = "pbb3"; + nvidia,function = "vgp3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + cam-af-pwdn { + nvidia,pins = "pbb7"; + nvidia,function = "i2s4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + cam-front-pwdn { + nvidia,pins = "pbb6"; + nvidia,function = "i2s4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + cam-front-rst-n { + nvidia,pins = "pcc1"; + nvidia,function = "i2s4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + gps-en { + nvidia,pins = "ph5"; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + boot-select { + nvidia,pins = "pg0", "pg1", "pg2", "pg3"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + ram-select { + nvidia,pins = "pg4", "pg5"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + line-in-det { + nvidia,pins = "pk2"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + gpadc-sync { + nvidia,pins = "pi0"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + gpu-pwr-req { + nvidia,pins = "kb_row5_pr5"; + nvidia,function = "rsvd3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + ear-uart-sw { + nvidia,pins = "pu4"; + nvidia,function = "pwm1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + dsi-b { + nvidia,pins = "mipi_pad_ctrl_dsi_b"; + nvidia,function = "dsi_b"; + }; + + /* GPIO power/drive control */ + drive-sdio1 { + nvidia,pins = "drive_sdio1"; + nvidia,high-speed-mode = ; + nvidia,schmitt = ; + nvidia,pull-down-strength = <32>; + nvidia,pull-up-strength = <42>; + nvidia,slew-rate-rising = ; + nvidia,slew-rate-falling = ; + }; + + drive-sdio3 { + nvidia,pins = "drive_sdio3"; + nvidia,high-speed-mode = ; + nvidia,schmitt = ; + nvidia,pull-down-strength = <20>; + nvidia,pull-up-strength = <36>; + nvidia,slew-rate-rising = ; + nvidia,slew-rate-falling = ; + }; + + drive-gma { + nvidia,pins = "drive_gma"; + nvidia,high-speed-mode = ; + nvidia,schmitt = ; + nvidia,low-power-mode = ; + nvidia,pull-down-strength = <1>; + nvidia,pull-up-strength = <2>; + nvidia,slew-rate-rising = ; + nvidia,slew-rate-falling = ; + }; + }; + }; + + uartc: serial@70006200 { + compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart"; + reset-names = "serial"; + /delete-property/ reg-shift; + status = "okay"; + + nvidia,adjust-baud-rates = <0 9600 100>, + <9600 115200 200>, + <1000000 4000000 136>; + + bluetooth { + compatible = "brcm,bcm43540-bt"; + max-speed = <4000000>; + + clocks = <&clk32k_pmic>; + clock-names = "lpo"; + + interrupt-parent = <&gpio>; + interrupts = ; + interrupt-names = "host-wakeup"; + + device-wakeup-gpios = <&gpio TEGRA_GPIO(EE, 1) GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_HIGH>; + + vbat-supply = <&vdd_3v3_sys>; + vddio-supply = <&vdd_1v8_vio>; + }; + }; + + uartd: serial@70006300 { + /delete-property/ dmas; + /delete-property/ dma-names; + status = "okay"; + + /* Console */ + }; + + pwm@7000a000 { + status = "okay"; + }; + + gen1_i2c: i2c@7000c000 { + status = "okay"; + clock-frequency = <400000>; + + lp8556: backlight@2c { + compatible = "ti,lp8556"; + reg = <0x2c>; + + dev-ctrl = /bits/ 8 <0x83>; + init-brt = /bits/ 8 <0x1f>; + + power-supply = <&vdd_3v3_sys>; + enable-supply = <&vddio_1v8_bl>; + + rom-98h { + rom-addr = /bits/ 8 <0x98>; + rom-val = /bits/ 8 <0x80>; + }; + + rom-9eh { + rom-addr = /bits/ 8 <0x9e>; + rom-val = /bits/ 8 <0x21>; + }; + + rom-a0h { + rom-addr = /bits/ 8 <0xa0>; + rom-val = /bits/ 8 <0xff>; + }; + + rom-a1h { + rom-addr = /bits/ 8 <0xa1>; + rom-val = /bits/ 8 <0x3f>; + }; + + rom-a2h { + rom-addr = /bits/ 8 <0xa2>; + rom-val = /bits/ 8 <0x20>; + }; + + rom-a3h { + rom-addr = /bits/ 8 <0xa3>; + rom-val = /bits/ 8 <0x00>; + }; + + rom-a4h { + rom-addr = /bits/ 8 <0xa4>; + rom-val = /bits/ 8 <0x72>; + }; + + rom-a5h { + rom-addr = /bits/ 8 <0xa5>; + rom-val = /bits/ 8 <0x24>; + }; + + rom-a6h { + rom-addr = /bits/ 8 <0xa6>; + rom-val = /bits/ 8 <0x80>; + }; + + rom-a7h { + rom-addr = /bits/ 8 <0xa7>; + rom-val = /bits/ 8 <0xf5>; + }; + + rom-a8h { + rom-addr = /bits/ 8 <0xa8>; + rom-val = /bits/ 8 <0x24>; + }; + + rom-a9h { + rom-addr = /bits/ 8 <0xa9>; + rom-val = /bits/ 8 <0xb2>; + }; + + rom-aah { + rom-addr = /bits/ 8 <0xaa>; + rom-val = /bits/ 8 <0x8f>; + }; + + rom-aeh { + rom-addr = /bits/ 8 <0xae>; + rom-val = /bits/ 8 <0x0f>; + }; + }; + + led-controller@32 { + compatible = "national,lp5521"; + reg = <0x32>; + + enable-gpios = <&gpio TEGRA_GPIO(G, 7) GPIO_ACTIVE_HIGH>; + clock-mode = /bits/ 8 <2>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0xff>; + + color = ; + function = LED_FUNCTION_STATUS; + }; + + led@1 { + reg = <1>; + + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0xff>; + + color = ; + function = LED_FUNCTION_STATUS; + }; + + led@2 { + reg = <2>; + + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0xff>; + + color = ; + function = LED_FUNCTION_STATUS; + }; + }; + + audio-codec@34 { + compatible = "nxp,tfa9890"; + reg = <0x34>; + + sound-name-prefix = "Speaker Right"; + vddd-supply = <&vdd_1v8_vio>; + + #sound-dai-cells = <0>; + }; + + audio-codec@37 { + compatible = "nxp,tfa9890"; + reg = <0x37>; + + sound-name-prefix = "Speaker Left"; + vddd-supply = <&vdd_1v8_vio>; + + #sound-dai-cells = <0>; + }; + + light-sensor@44 { + compatible = "isil,isl29035"; + reg = <0x44>; + + interrupt-parent = <&gpio>; + interrupts = ; + + vcc-supply = <&vdd_3v3_sys>; + }; + + temp_sensor: temperature-sensor@4c { + compatible = "ti,tmp451"; + reg = <0x4c>; + + interrupt-parent = <&gpio>; + interrupts = ; + + vcc-supply = <&vdd_1v8_vio>; + #thermal-sensor-cells = <1>; + }; + + haptic-engine@5a { + compatible = "ti,drv2604"; + reg = <0x5a>; + + enable-gpios = <&gpio TEGRA_GPIO(G, 6) GPIO_ACTIVE_HIGH>; + + mode = ; + library-sel = ; + + vib-rated-mv = <3200>; + vib-overdrive-mv = <3400>; + + vbat-supply = <&vdd_3v3_sys>; + }; + }; + + gen2_i2c: i2c@7000c400 { + status = "okay"; + clock-frequency = <400000>; + + power-sensor@40 { + compatible = "ti,ina230"; + reg = <0x40>; + + vs-supply = <&vdd_hv_sdmmc>; + #io-channel-cells = <1>; + }; + + fuel-gauge@55 { + compatible = "ti,bq27520g4"; + reg = <0x55>; + + interrupt-parent = <&gpio>; + interrupts = ; + + monitored-battery = <&battery>; + power-supplies = <&bq24192>; + }; + + bq24192: charger@6b { + compatible = "ti,bq24192"; + reg = <0x6b>; + + interrupt-parent = <&gpio>; + interrupts = ; + + ce-gpios = <&palmas_gpio 7 GPIO_ACTIVE_LOW>; + + monitored-battery = <&battery>; + + omit-battery-class; + ti,system-minimum-microvolt = <3500000>; + + usb_otg_vbus: usb-otg-vbus { + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + }; + }; + + i2c@7000c700 { + status = "okay"; + clock-frequency = <400000>; + + /* Atmel mxT1664T/mxT1066T touchscreen */ + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + + interrupt-parent = <&gpio>; + interrupts = ; + + reset-gpios = <&gpio TEGRA_GPIO(K, 4) GPIO_ACTIVE_LOW>; + + linux,keycodes = ; + + vdda-supply = <&avdd_3v3_ts>; + vdd-supply = <&vdd_2v8_tp>; + }; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + /* Texas Instruments TPS65913 PMIC */ + palmas: pmic@58 { + compatible = "ti,tps65913", "ti,palmas"; + reg = <0x58>; + interrupts = ; + + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + adc { + compatible = "ti,palmas-gpadc"; + interrupts = <18 IRQ_TYPE_NONE>, + <16 IRQ_TYPE_NONE>, + <17 IRQ_TYPE_NONE>; + + ti,channel0-current-microamp = <20>; + #io-channel-cells = <1>; + }; + + palmas_extcon: extcon { + compatible = "ti,palmas-usb-vid"; + + ti,enable-vbus-detection; + ti,enable-id-detection; + + ti,wakeup; + }; + + palmas_gpio: gpio { + compatible = "ti,palmas-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + clk32k_pmic: palmas-clk32k@0 { + compatible = "ti,palmas-clk32kg"; + #clock-cells = <0>; + }; + + pinmux { + compatible = "ti,tps65913-pinctrl"; + + pinctrl-names = "default"; + pinctrl-0 = <&palmas_default>; + + palmas_default: pinmux { + pin_gpio0 { + pins = "gpio0"; + function = "id"; + bias-pull-up; + }; + + pin_gpio1 { + pins = "gpio1"; + function = "gpio"; + }; + + pin_gpio2 { + pins = "gpio2"; + function = "gpio"; + }; + + /* GPIO3 is not used */ + + pin_gpio4 { + pins = "gpio4"; + function = "gpio"; + }; + + pin_gpio5 { + pins = "gpio5"; + function = "clk32kgaudio"; + }; + + /* GPIO6 is not used */ + + pin_gpio7 { + pins = "gpio7"; + function = "gpio"; + }; + + pin_powergood { + pins = "powergood"; + function = "powergood"; + }; + + pin_vac { + pins = "vac"; + function = "vac"; + }; + }; + }; + + pmic { + compatible = "ti,tps65913-pmic", "ti,palmas-pmic"; + + ldo1-in-supply = <&vdd_1v8_vio>; + ldo2-in-supply = <&vdd_3v3_sys>; + ldo3-in-supply = <&vdd_smps10_out2>; + ldo4-in-supply = <&vdd_3v3_sys>; + ldo5-in-supply = <&vdd_1v8_vio>; + ldo6-in-supply = <&vdd_3v3_sys>; + ldo7-in-supply = <&vdd_3v3_sys>; + ldo8-in-supply = <&vdd_3v3_sys>; + ldo9-in-supply = <&vdd_hv_sdmmc>; + ldousb-in-supply = <&vdd_smps10_out2>; + ldoln-in-supply = <&vdd_smps10_out2>; + + regulators { + vdd_cpu: smps123 { + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + ti,roof-floor = <1>; + ti,mode-sleep = <3>; + }; + + vdd_gpu: smps45 { + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + }; + + vddio_ddr: smps6 { + regulator-name = "vddio_ddr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_core: smps7 { + regulator-name = "vdd_core"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + ti,roof-floor = <3>; + }; + + vdd_1v8_vio: smps8 { + regulator-name = "vdd_1v8_gen"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_hv_sdmmc: smps9 { + regulator-name = "vdd_hv_sdmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + smps10_out1 { + regulator-name = "vd_smps10_out1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_smps10_out2: smps10_out2 { + regulator-name = "vd_smps10_out2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + avdd_pll: ldo1 { + regulator-name = "avdd_pll"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + regulator-boot-on; + ti,roof-floor = <3>; + }; + + avdd_lcd: ldo2 { + regulator-name = "avdd_lcd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + avdd_3v3_ts: ldo3 { + regulator-name = "avdd_3v3_ts"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + avdd_2v7_cam: ldo4 { + regulator-name = "avdd_2v7_cam"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + avdd_dsi_csi: ldo5 { + regulator-name = "avdd_dsi_csi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + }; + + ldo6 { + regulator-name = "vdd_1v8_fuse"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + avdd_2v7_vcm: ldo7 { + regulator-name = "avdd_2v7_vcm"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + ldo8 { + regulator-name = "vdd_rtc"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + regulator-always-on; + regulator-boot-on; + ti,enable-ldo8-tracking; + }; + + vddio_usd: ldo9 { + regulator-name = "vddio_sdmmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + avdd_usb: ldousb { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldoln { + regulator-name = "vddio_hv"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + + rtc { + compatible = "ti,palmas-rtc"; + interrupt-parent = <&palmas>; + interrupts = <8 IRQ_TYPE_NONE>; + }; + }; + }; + + pmc@7000e400 { + nvidia,suspend-mode = <1>; + nvidia,cpu-pwr-good-time = <500>; + nvidia,cpu-pwr-off-time = <300>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <2000>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + core-supply = <&vdd_core>; + + /* Clear DEV_ON bit in DEV_CTRL register of TPS65913 PMIC */ + i2c-thermtrip { + nvidia,i2c-controller-id = <4>; + nvidia,bus-addr = <0x58>; + nvidia,reg-addr = <0xa0>; + nvidia,reg-data = <0x00>; + }; + }; + + memory-controller@70019000 { + emc-timings-0 { + /* Hynix H9CKNNNBKTMTDR DDR3 924MHz */ + nvidia,ram-code = <0>; + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emem-configuration = < 0x40040001 0x8000000a + 0x00000001 0x00000002 0x00000004 0x00000000 + 0x00000003 0x00000001 0x00000002 0x00000007 + 0x00000002 0x00000001 0x00000004 0x00000005 + 0x05040102 0x000b0604 0x77230305 0x70000f03 + 0x001f0000 >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emem-configuration = < 0x40020001 0x80000012 + 0x00000001 0x00000002 0x00000004 0x00000000 + 0x00000003 0x00000001 0x00000002 0x00000007 + 0x00000002 0x00000001 0x00000004 0x00000005 + 0x05040102 0x000b0604 0x75a30305 0x70000f03 + 0x001f0000 >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emem-configuration = < 0xa0000001 0x80000017 + 0x00000001 0x00000002 0x00000004 0x00000000 + 0x00000003 0x00000001 0x00000002 0x00000007 + 0x00000002 0x00000001 0x00000004 0x00000005 + 0x05040102 0x000b0604 0x74030305 0x70000f03 + 0x001f0000 >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emem-configuration = < 0x00000001 0x8000001e + 0x00000001 0x00000002 0x00000003 0x00000000 + 0x00000003 0x00000001 0x00000002 0x00000007 + 0x00000002 0x00000001 0x00000004 0x00000005 + 0x05040102 0x000a0503 0x73830404 0x70000f03 + 0x001f0000 >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emem-configuration = < 0x08000001 0x80000026 + 0x00000001 0x00000002 0x00000004 0x00000001 + 0x00000003 0x00000001 0x00000002 0x00000007 + 0x00000002 0x00000001 0x00000004 0x00000005 + 0x05040102 0x000a0504 0x73430505 0x70000f03 + 0x001f0000 >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emem-configuration = < 0x01000003 0x80000040 + 0x00000001 0x00000002 0x00000007 0x00000003 + 0x00000005 0x00000001 0x00000002 0x00000007 + 0x00000003 0x00000001 0x00000005 0x00000005 + 0x05050103 0x000b0607 0x72e40a08 0x70000f03 + 0x001f0000 >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emem-configuration = < 0x08000004 0x80000040 + 0x00000001 0x00000002 0x00000009 0x00000005 + 0x00000007 0x00000001 0x00000002 0x00000007 + 0x00000003 0x00000001 0x00000005 0x00000005 + 0x05050103 0x000c0709 0x72c50e0a 0x70000f03 + 0x001f0000 >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emem-configuration = < 0x0f000005 0x80000040 + 0x00000002 0x00000003 0x0000000c 0x00000007 + 0x00000009 0x00000001 0x00000002 0x00000007 + 0x00000003 0x00000001 0x00000005 0x00000005 + 0x05050103 0x000e090c 0x72c6120d 0x70000f03 + 0x001f0000 >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emem-configuration = < 0x0f000007 0x80000040 + 0x00000003 0x00000004 0x00000010 0x0000000a + 0x0000000d 0x00000002 0x00000002 0x00000009 + 0x00000003 0x00000001 0x00000006 0x00000006 + 0x06060103 0x00120b10 0x72c81811 0x70000f03 + 0x001f0000 >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emem-configuration = < 0x00000009 0x80000040 + 0x00000004 0x00000005 0x00000012 0x0000000b + 0x0000000e 0x00000002 0x00000003 0x0000000a + 0x00000003 0x00000001 0x00000006 0x00000007 + 0x07060103 0x00140d12 0x72c91b13 0x70000f03 + 0x001f0000 >; + }; + + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emem-configuration = < 0x0e00000b 0x80000040 + 0x00000006 0x00000007 0x00000018 0x0000000f + 0x00000013 0x00000003 0x00000003 0x0000000c + 0x00000003 0x00000001 0x00000008 0x00000008 + 0x08080103 0x001a1118 0x72ac2419 0x70000f02 + 0x001f0000 >; + }; + + timing-924000000 { + clock-frequency = <924000000>; + + nvidia,emem-configuration = < 0x0e00000d 0x80000040 + 0x00000007 0x00000008 0x0000001b 0x00000012 + 0x00000017 0x00000004 0x00000004 0x0000000e + 0x00000004 0x00000001 0x00000009 0x00000009 + 0x09090104 0x001e141b 0x72ae2a1c 0x70000f02 + 0x001f0000 >; + }; + }; + }; + + external-memory-controller@7001b000 { + emc-timings-0 { + /* Hynix H9CKNNNBKTMTDR DDR3 924MHz */ + nvidia,ram-code = <0>; + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0xd3200000>; + nvidia,emc-cfg-2 = <0x000008c7>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80010083>; + nvidia,emc-mode-2 = <0x80020004>; + nvidia,emc-mode-4 = <0x800b0000>; + nvidia,emc-mode-reset = <0x00000000>; + nvidia,emc-mrs-wait-cnt = <0x000d0011>; + nvidia,emc-sel-dpd-ctrl = <0x0004013c>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b018>; + nvidia,emc-zcal-cnt-long = <0x00000015>; + nvidia,emc-zcal-interval = <0x00064000>; + + nvidia,emc-configuration = < + 0x00000000 0x00000002 0x00000000 0x00000002 + 0x00000005 0x00000006 0x00000008 0x00000003 + 0x0000000a 0x00000002 0x00000002 0x00000001 + 0x00000002 0x00000000 0x00000003 0x00000003 + 0x00000006 0x00000002 0x00000000 0x00000005 + 0x00000005 0x00010000 0x00000003 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000004 + 0x0000000c 0x0000000d 0x0000000f 0x00000030 + 0x00000000 0x0000000c 0x00000002 0x00000002 + 0x00000005 0x00000000 0x00000001 0x0000000c + 0x00000003 0x00000003 0x00000003 0x00000003 + 0x00000003 0x00000006 0x00000006 0x00000003 + 0x00000003 0x00000056 0x00000000 0x00000000 + 0x00000000 0x1363a296 0x005800a0 0x00008000 + 0x00090000 0x00090000 0x00090000 0x00090000 + 0x00090000 0x00090000 0x00090000 0x00090000 + 0x00090000 0x00090000 0x00090000 0x00090000 + 0x00090000 0x00090000 0x00090000 0x00090000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x000fc000 0x000fc000 0x00000000 0x000fc000 + 0x000fc000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x000fc000 0x000fc000 + 0x000fc000 0x000fc000 0x0000fc00 0x0000fc00 + 0x0000fc00 0x0000fc00 0x00000200 0x00000000 + 0x00100100 0x00000000 0x00000000 0x77ffc000 + 0x00000404 0x81f1f008 0x07070000 0x0000003f + 0x015ddddd 0x51451400 0x00514514 0x00514514 + 0x51451400 0x0000003f 0x00000000 0x00000000 + 0x00000011 0x000d0011 0x00000000 0x00000003 + 0x0000f3f3 0x80000164 0x0000000a >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0xd3200000>; + nvidia,emc-cfg-2 = <0x000008c7>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80010083>; + nvidia,emc-mode-2 = <0x80020004>; + nvidia,emc-mode-4 = <0x800b0000>; + nvidia,emc-mode-reset = <0x00000000>; + nvidia,emc-mrs-wait-cnt = <0x00150011>; + nvidia,emc-sel-dpd-ctrl = <0x0004013c>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b018>; + nvidia,emc-zcal-cnt-long = <0x00000015>; + nvidia,emc-zcal-interval = <0x00064000>; + + nvidia,emc-configuration = < + 0x00000001 0x00000004 0x00000000 0x00000002 + 0x00000005 0x00000006 0x00000008 0x00000003 + 0x0000000a 0x00000002 0x00000002 0x00000001 + 0x00000002 0x00000000 0x00000003 0x00000003 + 0x00000006 0x00000002 0x00000000 0x00000005 + 0x00000005 0x00010000 0x00000003 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000004 + 0x0000000c 0x0000000d 0x0000000f 0x0000004d + 0x00000000 0x00000013 0x00000002 0x00000002 + 0x00000005 0x00000000 0x00000001 0x0000000c + 0x00000005 0x00000005 0x00000003 0x00000003 + 0x00000003 0x00000006 0x00000006 0x00000003 + 0x00000003 0x0000008a 0x00000000 0x00000000 + 0x00000000 0x1363a296 0x005800a0 0x00008000 + 0x00090000 0x00090000 0x00090000 0x00090000 + 0x00090000 0x00090000 0x00090000 0x00090000 + 0x00090000 0x00090000 0x00090000 0x00090000 + 0x00090000 0x00090000 0x00090000 0x00090000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x000fc000 0x000fc000 0x00000000 0x000fc000 + 0x000fc000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x000fc000 0x000fc000 + 0x000fc000 0x000fc000 0x0000fc00 0x0000fc00 + 0x0000fc00 0x0000fc00 0x00000200 0x00000000 + 0x00100100 0x00000000 0x00000000 0x77ffc000 + 0x00000404 0x81f1f008 0x07070000 0x0000003f + 0x015ddddd 0x51451400 0x00514514 0x00514514 + 0x51451400 0x0000003f 0x00000000 0x00000000 + 0x00000011 0x00150011 0x00000000 0x00000003 + 0x0000f3f3 0x8000019f 0x0000000a >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0xd3200000>; + nvidia,emc-cfg-2 = <0x000008c7>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80010083>; + nvidia,emc-mode-2 = <0x80020004>; + nvidia,emc-mode-4 = <0x800b0000>; + nvidia,emc-mode-reset = <0x00000000>; + nvidia,emc-mrs-wait-cnt = <0x00290011>; + nvidia,emc-sel-dpd-ctrl = <0x0004013c>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b018>; + nvidia,emc-zcal-cnt-long = <0x00000015>; + nvidia,emc-zcal-interval = <0x00064000>; + + nvidia,emc-configuration = < + 0x00000002 0x00000008 0x00000000 0x00000002 + 0x00000005 0x00000006 0x00000008 0x00000003 + 0x0000000a 0x00000002 0x00000002 0x00000001 + 0x00000002 0x00000000 0x00000003 0x00000003 + 0x00000006 0x00000002 0x00000000 0x00000005 + 0x00000005 0x00010000 0x00000003 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000004 + 0x0000000c 0x0000000d 0x0000000f 0x0000009a + 0x00000000 0x00000026 0x00000002 0x00000002 + 0x00000005 0x00000000 0x00000001 0x0000000c + 0x00000009 0x00000009 0x00000003 0x00000003 + 0x00000003 0x00000006 0x00000007 0x00000003 + 0x00000003 0x00000113 0x00000000 0x00000000 + 0x00000000 0x1363a296 0x005800a0 0x00008000 + 0x00090000 0x00090000 0x00090000 0x00090000 + 0x00090000 0x00090000 0x00090000 0x00090000 + 0x00090000 0x00090000 0x00090000 0x00090000 + 0x00090000 0x00090000 0x00090000 0x00090000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x000fc000 0x000fc000 0x00000000 0x000fc000 + 0x000fc000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x000fc000 0x000fc000 + 0x000fc000 0x000fc000 0x0000fc00 0x0000fc00 + 0x0000fc00 0x0000fc00 0x00000200 0x00000000 + 0x00100100 0x00000000 0x00000000 0x77ffc000 + 0x00000404 0x81f1f008 0x07070000 0x0000003f + 0x015ddddd 0x51451400 0x00514514 0x00514514 + 0x51451400 0x0000003f 0x00000000 0x00000000 + 0x00000011 0x00290011 0x00000000 0x00000003 + 0x0000f3f3 0x8000023a 0x0000000a >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0xd3200000>; + nvidia,emc-cfg-2 = <0x000008c7>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80010083>; + nvidia,emc-mode-2 = <0x80020004>; + nvidia,emc-mode-4 = <0x800b0000>; + nvidia,emc-mode-reset = <0x00000000>; + nvidia,emc-mrs-wait-cnt = <0x00440011>; + nvidia,emc-sel-dpd-ctrl = <0x0004013c>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b018>; + nvidia,emc-zcal-cnt-long = <0x00000015>; + nvidia,emc-zcal-interval = <0x00064000>; + + nvidia,emc-configuration = < + 0x00000004 0x00000010 0x00000000 0x00000002 + 0x00000004 0x00000006 0x00000008 0x00000003 + 0x0000000a 0x00000002 0x00000002 0x00000001 + 0x00000002 0x00000000 0x00000003 0x00000003 + 0x00000006 0x00000002 0x00000000 0x00000005 + 0x00000005 0x00010000 0x00000003 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000004 + 0x0000000c 0x0000000d 0x0000000f 0x00000101 + 0x00000000 0x00000040 0x00000002 0x00000002 + 0x00000004 0x00000000 0x00000001 0x0000000c + 0x0000000f 0x0000000f 0x00000003 0x00000003 + 0x00000003 0x00000006 0x00000005 0x00000003 + 0x00000003 0x000001c9 0x00000000 0x00000000 + 0x00000000 0x1363a296 0x005800a0 0x00008000 + 0x00090000 0x00090000 0x00090000 0x00090000 + 0x00090000 0x00090000 0x00090000 0x00090000 + 0x00090000 0x00090000 0x00090000 0x00090000 + 0x00090000 0x00090000 0x00090000 0x00090000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x000fc000 0x000fc000 0x00000000 0x000fc000 + 0x000fc000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x000fc000 0x000fc000 + 0x000fc000 0x000fc000 0x0000fc00 0x0000fc00 + 0x0000fc00 0x0000fc00 0x00000200 0x00000000 + 0x00100100 0x00000000 0x00000000 0x77ffc000 + 0x00000404 0x81f1f008 0x07070000 0x0000003f + 0x015ddddd 0x51451400 0x00514514 0x00514514 + 0x51451400 0x0000003f 0x00000000 0x00000000 + 0x00000019 0x00440011 0x00000000 0x00000003 + 0x0000f3f3 0x80000309 0x0000000a >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0xd3200000>; + nvidia,emc-cfg-2 = <0x000008c7>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80010083>; + nvidia,emc-mode-2 = <0x80020004>; + nvidia,emc-mode-4 = <0x800b0000>; + nvidia,emc-mode-reset = <0x00000000>; + nvidia,emc-mrs-wait-cnt = <0x00660011>; + nvidia,emc-sel-dpd-ctrl = <0x0004013c>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b018>; + nvidia,emc-zcal-cnt-long = <0x00000015>; + nvidia,emc-zcal-interval = <0x00064000>; + + nvidia,emc-configuration = < + 0x00000006 0x00000015 0x00000000 0x00000004 + 0x00000004 0x00000006 0x00000008 0x00000003 + 0x0000000a 0x00000002 0x00000002 0x00000001 + 0x00000002 0x00000000 0x00000003 0x00000003 + 0x00000006 0x00000002 0x00000000 0x00000005 + 0x00000005 0x00010000 0x00000003 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000004 + 0x0000000c 0x0000000d 0x0000000f 0x00000182 + 0x00000000 0x00000060 0x00000002 0x00000002 + 0x00000004 0x00000000 0x00000001 0x0000000c + 0x00000017 0x00000017 0x00000003 0x00000003 + 0x00000003 0x00000006 0x00000005 0x00000003 + 0x00000003 0x000002ae 0x00000000 0x00000000 + 0x00000000 0x1363a296 0x005800a0 0x00008000 + 0x00090000 0x00090000 0x00090000 0x00090000 + 0x00090000 0x00090000 0x00090000 0x00090000 + 0x00090000 0x00090000 0x00090000 0x00090000 + 0x00090000 0x00090000 0x00090000 0x00090000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x000fc000 0x000fc000 0x00000000 0x000fc000 + 0x000fc000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x000fc000 0x000fc000 + 0x000fc000 0x000fc000 0x0000fc00 0x0000fc00 + 0x0000fc00 0x0000fc00 0x00000200 0x00000000 + 0x00100100 0x00000000 0x00000000 0x77ffc000 + 0x00000404 0x81f1f008 0x07070000 0x0000003f + 0x015ddddd 0x51451400 0x00514514 0x00514514 + 0x51451400 0x0000003f 0x00000000 0x00000000 + 0x00000025 0x00660011 0x00000000 0x00000003 + 0x0000f3f3 0x8000040b 0x0000000a >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0xd3200000>; + nvidia,emc-cfg-2 = <0x000008cf>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80010083>; + nvidia,emc-mode-2 = <0x80020004>; + nvidia,emc-mode-4 = <0x800b0000>; + nvidia,emc-mode-reset = <0x00000000>; + nvidia,emc-mrs-wait-cnt = <0x00cc0011>; + nvidia,emc-sel-dpd-ctrl = <0x0004013c>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b018>; + nvidia,emc-zcal-cnt-long = <0x00000017>; + nvidia,emc-zcal-interval = <0x00064000>; + + nvidia,emc-configuration = < + 0x0000000c 0x0000002a 0x00000000 0x00000008 + 0x00000005 0x00000007 0x00000008 0x00000003 + 0x0000000a 0x00000003 0x00000003 0x00000002 + 0x00000003 0x00000000 0x00000002 0x00000002 + 0x00000005 0x00000003 0x00000000 0x00000003 + 0x00000007 0x00010000 0x00000004 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000002 + 0x0000000e 0x0000000f 0x00000011 0x00000304 + 0x00000000 0x000000c1 0x00000002 0x00000002 + 0x00000005 0x00000000 0x00000001 0x0000000c + 0x0000002d 0x0000002d 0x00000003 0x00000004 + 0x00000003 0x00000009 0x00000006 0x00000003 + 0x00000003 0x0000055b 0x00000000 0x00000000 + 0x00000000 0x1363a296 0x005800a0 0x00008000 + 0x00080000 0x00080000 0x00080000 0x00080000 + 0x00080000 0x00080000 0x00080000 0x00080000 + 0x00080000 0x00080000 0x00080000 0x00080000 + 0x00080000 0x00080000 0x00080000 0x00080000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00098000 0x00098000 0x00000000 0x00098000 + 0x00098000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x0008c000 0x00088000 + 0x00088000 0x00088000 0x00008800 0x00008800 + 0x00008800 0x00008800 0x00000200 0x00000000 + 0x00100100 0x00000000 0x00000000 0x77ffc000 + 0x00000404 0x81f1f008 0x07070000 0x0000003f + 0x015ddddd 0x51451400 0x00514514 0x00514514 + 0x51451400 0x0000003f 0x00000000 0x00000000 + 0x0000004a 0x00cc0011 0x00000000 0x00000004 + 0x0000d3b3 0x80000713 0x0000000a >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0xd3300000>; + nvidia,emc-cfg-2 = <0x000008d7>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80010083>; + nvidia,emc-mode-2 = <0x80020004>; + nvidia,emc-mode-4 = <0x800b0000>; + nvidia,emc-mode-reset = <0x00000000>; + nvidia,emc-mrs-wait-cnt = <0x012c0011>; + nvidia,emc-sel-dpd-ctrl = <0x0004013c>; + nvidia,emc-xm2dqspadctrl2 = <0x01231239>; + nvidia,emc-zcal-cnt-long = <0x0000001f>; + nvidia,emc-zcal-interval = <0x00064000>; + + nvidia,emc-configuration = < + 0x00000011 0x0000003e 0x00000000 0x0000000c + 0x00000005 0x00000007 0x00000008 0x00000003 + 0x0000000a 0x00000005 0x00000005 0x00000002 + 0x00000003 0x00000000 0x00000002 0x00000002 + 0x00000006 0x00000003 0x00000000 0x00000003 + 0x00000008 0x00030000 0x00000004 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000002 + 0x0000000f 0x00000012 0x00000014 0x0000046e + 0x00000000 0x0000011b 0x00000002 0x00000002 + 0x00000005 0x00000000 0x00000001 0x0000000c + 0x00000042 0x00000042 0x00000003 0x00000005 + 0x00000003 0x0000000d 0x00000007 0x00000003 + 0x00000003 0x000007e0 0x00000000 0x00000000 + 0x00000000 0x1363a096 0x005800a0 0x00008000 + 0x00020000 0x00020000 0x00020000 0x00020000 + 0x00020000 0x00020000 0x00020000 0x00020000 + 0x00020000 0x00020000 0x00020000 0x00020000 + 0x00020000 0x00020000 0x00020000 0x00020000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00060000 0x00060000 0x00000000 0x00060000 + 0x00060000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00048000 0x00048000 + 0x00048000 0x00048000 0x00004800 0x00004800 + 0x00004800 0x00004800 0x00000200 0x00000000 + 0x00100100 0x00000000 0x00000000 0x77ffc000 + 0x00000404 0x81f1f008 0x07070000 0x0000003f + 0x015ddddd 0x51451420 0x00514514 0x00514514 + 0x51451400 0x0000003f 0x00000000 0x00000000 + 0x0000006c 0x012c0011 0x00000000 0x00000004 + 0x000052a3 0x800009ed 0x0000000b >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0xd3300000>; + nvidia,emc-cfg-2 = <0x00000897>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80010083>; + nvidia,emc-mode-2 = <0x80020004>; + nvidia,emc-mode-4 = <0x800b0000>; + nvidia,emc-mode-reset = <0x00000000>; + nvidia,emc-mrs-wait-cnt = <0x018c0011>; + nvidia,emc-sel-dpd-ctrl = <0x0004001c>; + nvidia,emc-xm2dqspadctrl2 = <0x01231239>; + nvidia,emc-zcal-cnt-long = <0x00000028>; + nvidia,emc-zcal-interval = <0x00064000>; + + nvidia,emc-configuration = < + 0x00000017 0x00000053 0x00000000 0x00000010 + 0x00000007 0x00000008 0x00000008 0x00000003 + 0x0000000a 0x00000007 0x00000007 0x00000003 + 0x00000003 0x00000000 0x00000002 0x00000002 + 0x00000006 0x00000003 0x00000000 0x00000002 + 0x00000009 0x00030000 0x00000004 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000001 + 0x00000010 0x00000012 0x00000014 0x000005d9 + 0x00000000 0x00000176 0x00000002 0x00000002 + 0x00000007 0x00000000 0x00000001 0x0000000e + 0x00000058 0x00000058 0x00000003 0x00000006 + 0x00000003 0x00000012 0x00000009 0x00000003 + 0x00000003 0x00000a66 0x00000000 0x00000000 + 0x00000000 0x1363a096 0x005800a0 0x00008000 + 0x00020000 0x00020000 0x00020000 0x00020000 + 0x00020000 0x00020000 0x00020000 0x00020000 + 0x00020000 0x00020000 0x00020000 0x00020000 + 0x00020000 0x00020000 0x00020000 0x00020000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00048000 0x00048000 0x00000000 0x00048000 + 0x00048000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00038000 0x00038000 + 0x00038000 0x00038000 0x00003800 0x00003800 + 0x00003800 0x00003800 0x00000200 0x00000000 + 0x00100100 0x00000000 0x00000000 0x77ffc000 + 0x00000404 0x81f1f008 0x07070000 0x0000003f + 0x015ddddd 0x51451420 0x00514514 0x00514514 + 0x51451400 0x0000003f 0x00000000 0x00000000 + 0x0000008f 0x018c0011 0x00000000 0x00000004 + 0x000052a3 0x80000cc7 0x0000000b >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0xd3300000>; + nvidia,emc-cfg-2 = <0x0000089f>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x800100c3>; + nvidia,emc-mode-2 = <0x80020006>; + nvidia,emc-mode-4 = <0x800b0000>; + nvidia,emc-mode-reset = <0x00000000>; + nvidia,emc-mrs-wait-cnt = <0x02100013>; + nvidia,emc-sel-dpd-ctrl = <0x0004001c>; + nvidia,emc-xm2dqspadctrl2 = <0x0123123d>; + nvidia,emc-zcal-cnt-long = <0x00000034>; + nvidia,emc-zcal-interval = <0x00064000>; + + nvidia,emc-configuration = < + 0x0000001f 0x0000006e 0x00000000 0x00000016 + 0x00000009 0x00000009 0x00000009 0x00000003 + 0x0000000d 0x00000009 0x00000009 0x00000005 + 0x00000004 0x00000000 0x00000002 0x00000002 + 0x00000008 0x00000003 0x00000000 0x00000003 + 0x0000000a 0x00050000 0x00000004 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000002 + 0x00000011 0x00000015 0x00000017 0x000007cd + 0x00000000 0x000001f3 0x00000003 0x00000003 + 0x00000009 0x00000000 0x00000001 0x00000011 + 0x00000075 0x00000075 0x00000004 0x00000008 + 0x00000004 0x00000019 0x0000000c 0x00000003 + 0x00000003 0x00000ddd 0x00000000 0x00000000 + 0x00000000 0x1363a096 0xe01200b9 0x00008000 + 0x0000000a 0x0000000a 0x0000000a 0x0000000a + 0x0000000a 0x0000000a 0x0000000a 0x0000000a + 0x0000000a 0x0000000a 0x0000000a 0x0000000a + 0x0000000a 0x0000000a 0x0000000a 0x0000000a + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00004010 0x00004010 0x00000000 0x00004010 + 0x00004010 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x0000000c 0x0000000c + 0x0000000c 0x0000000c 0x0000000c 0x0000000c + 0x0000000c 0x0000000c 0x00000220 0x00000000 + 0x00100100 0x00000000 0x00000000 0x77ffc004 + 0x00000404 0x81f1f008 0x07070000 0x0000003f + 0x015ddddd 0x51451420 0x00514514 0x00514514 + 0x51451400 0x0000003f 0x00000000 0x00000000 + 0x000000bf 0x02100013 0x00000000 0x00000004 + 0x000042a0 0x800010b3 0x0000000d >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0xd3300000>; + nvidia,emc-cfg-2 = <0x0000089f>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x800100e3>; + nvidia,emc-mode-2 = <0x80020007>; + nvidia,emc-mode-4 = <0x800b0000>; + nvidia,emc-mode-reset = <0x00000000>; + nvidia,emc-mrs-wait-cnt = <0x02580014>; + nvidia,emc-sel-dpd-ctrl = <0x0004001c>; + nvidia,emc-xm2dqspadctrl2 = <0x0121103d>; + nvidia,emc-zcal-cnt-long = <0x0000003a>; + nvidia,emc-zcal-interval = <0x00064000>; + + nvidia,emc-configuration = < + 0x00000023 0x0000007d 0x00000000 0x00000019 + 0x0000000a 0x0000000a 0x0000000b 0x00000004 + 0x0000000f 0x0000000a 0x0000000a 0x00000005 + 0x00000004 0x00000000 0x00000004 0x00000004 + 0x0000000a 0x00000004 0x00000000 0x00000003 + 0x0000000d 0x00070000 0x00000005 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000002 + 0x00000014 0x00000018 0x0000001a 0x000008e4 + 0x00000000 0x00000239 0x00000004 0x00000004 + 0x0000000a 0x00000000 0x00000001 0x00000013 + 0x00000084 0x00000084 0x00000005 0x00000009 + 0x00000005 0x0000001c 0x0000000d 0x00000003 + 0x00000003 0x00000fc0 0x00000000 0x00000000 + 0x00000000 0x1363a096 0xe00e00b9 0x00008000 + 0x0000000a 0x0000000a 0x0000000a 0x0000000a + 0x0000000a 0x0000000a 0x0000000a 0x0000000a + 0x0000000a 0x0000000a 0x0000000a 0x0000000a + 0x0000000a 0x0000000a 0x0000000a 0x0000000a + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000010 0x00000010 0x00000000 0x00000010 + 0x00000010 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000001 + 0x00000000 0x00000001 0x00000001 0x00000000 + 0x00000001 0x00000000 0x00000000 0x00000001 + 0x00000000 0x00000001 0x00000001 0x00000000 + 0x00000001 0x00000000 0x0000000c 0x0000000b + 0x0000000b 0x0000000b 0x0000000b 0x0000000b + 0x0000000b 0x0000000b 0x00000220 0x00000000 + 0x00100100 0x00000000 0x00000000 0x77ffc004 + 0x00000404 0x81f1f008 0x07070000 0x0000003f + 0x015ddddd 0x51451420 0x00514514 0x00514514 + 0x51451400 0x0000003f 0x00000000 0x00000000 + 0x000000d8 0x02580014 0x00000000 0x00000005 + 0x000040a0 0x800012d6 0x00000010 >; + }; + + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0xd3300000>; + nvidia,emc-cfg-2 = <0x0000089f>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80010043>; + nvidia,emc-mode-2 = <0x8002001a>; + nvidia,emc-mode-4 = <0x800b0000>; + nvidia,emc-mode-reset = <0x00000000>; + nvidia,emc-mrs-wait-cnt = <0x03180017>; + nvidia,emc-sel-dpd-ctrl = <0x0004001c>; + nvidia,emc-xm2dqspadctrl2 = <0x0120103d>; + nvidia,emc-zcal-cnt-long = <0x0000004c>; + nvidia,emc-zcal-interval = <0x00064000>; + + nvidia,emc-configuration = < + 0x0000002f 0x000000a6 0x00000000 0x00000021 + 0x0000000e 0x0000000d 0x0000000d 0x00000005 + 0x00000013 0x0000000e 0x0000000e 0x00000007 + 0x00000004 0x00000000 0x00000005 0x00000005 + 0x0000000e 0x00000004 0x00000000 0x00000005 + 0x0000000f 0x000b0000 0x00000006 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000004 + 0x00000016 0x0000001d 0x0000001f 0x00000bd1 + 0x00000000 0x000002f4 0x00000005 0x00000005 + 0x0000000e 0x00000000 0x00000001 0x00000017 + 0x000000af 0x000000af 0x00000006 0x0000000c + 0x00000006 0x00000026 0x00000011 0x00000003 + 0x00000003 0x000014cb 0x00000000 0x00000000 + 0x00000000 0x1363a096 0xe00700b9 0x00008000 + 0x00000006 0x00000006 0x00000006 0x00000006 + 0x00000006 0x00000006 0x00000006 0x00000006 + 0x00000006 0x00000006 0x00000006 0x00000006 + 0x00000006 0x00000006 0x00000006 0x00000006 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00008012 0x00008012 0x00000000 0x00008012 + 0x00008012 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000002 0x00000005 + 0x00000002 0x00000004 0x00000005 0x00000004 + 0x00000004 0x00000003 0x00000002 0x00000005 + 0x00000002 0x00000004 0x00000005 0x00000004 + 0x00000004 0x00000003 0x0000000b 0x0000000a + 0x0000000a 0x0000000a 0x0000000a 0x0000000a + 0x0000000a 0x0000000a 0x00000220 0x00000000 + 0x00100100 0x00000000 0x00000000 0x77ffc004 + 0x00000808 0x81f1f008 0x07070000 0x00000000 + 0x015ddddd 0x61861820 0x00514514 0x00514514 + 0x61861800 0x0000003f 0x00000000 0x00000000 + 0x0000011e 0x03180017 0x00000000 0x00000006 + 0x00004080 0x8000188b 0x00000014 >; + }; + + timing-924000000 { + clock-frequency = <924000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0xd3300000>; + nvidia,emc-cfg-2 = <0x0000089f>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80010083>; + nvidia,emc-mode-2 = <0x8002001c>; + nvidia,emc-mode-4 = <0x800b0000>; + nvidia,emc-mode-reset = <0x00000000>; + nvidia,emc-mrs-wait-cnt = <0x039c0019>; + nvidia,emc-sel-dpd-ctrl = <0x0004001c>; + nvidia,emc-xm2dqspadctrl2 = <0x0120103d>; + nvidia,emc-zcal-cnt-long = <0x00000058>; + nvidia,emc-zcal-interval = <0x00064000>; + + nvidia,emc-configuration = < + 0x00000037 0x000000c2 0x00000000 0x00000026 + 0x00000010 0x0000000f 0x00000010 0x00000006 + 0x00000017 0x00000010 0x00000010 0x00000009 + 0x00000005 0x00000000 0x00000007 0x00000007 + 0x00000010 0x00000005 0x00000000 0x00000005 + 0x00000012 0x000d0000 0x00000007 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000004 + 0x00000019 0x00000020 0x00000022 0x00000dd4 + 0x00000000 0x00000375 0x00000006 0x00000006 + 0x00000010 0x00000000 0x00000001 0x0000001b + 0x000000cc 0x000000cc 0x00000007 0x0000000e + 0x00000007 0x0000002d 0x00000014 0x00000003 + 0x00000003 0x00001842 0x00000000 0x00000000 + 0x00000000 0x1363a896 0xe00400b9 0x00008000 + 0x00000004 0x00000004 0x00000004 0x00000004 + 0x00000004 0x00000004 0x00000004 0x00000004 + 0x00000004 0x00000004 0x00000004 0x00000004 + 0x00000004 0x00000004 0x00000004 0x00000004 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x0000000f 0x0000000f 0x00000000 0x00000011 + 0x00000012 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000004 0x00000006 + 0x00000004 0x00000006 0x00000006 0x00000006 + 0x00000006 0x00000005 0x00000004 0x00000006 + 0x00000004 0x00000006 0x00000006 0x00000006 + 0x00000006 0x00000005 0x0000000a 0x00000009 + 0x00000009 0x0000000a 0x00000009 0x00000009 + 0x00000009 0x00000009 0x00000220 0x00000000 + 0x00100100 0x00000000 0x00000000 0x77ffc004 + 0x00000404 0x81f1f008 0x07070000 0x00000000 + 0x015ddddd 0x51451420 0x00514514 0x00514514 + 0x51451400 0x0000003f 0x00000000 0x00000000 + 0x0000014d 0x039c0019 0x00000000 0x00000007 + 0x00004080 0x80001c77 0x00000017 >; + }; + }; + }; + + padctl@7009f000 { + status = "disabled"; + }; + + /* WiFi */ + sdmmc1: mmc@700b0000 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + assigned-clocks = <&tegra_car TEGRA124_CLK_SDMMC1>; + assigned-clock-parents = <&tegra_car TEGRA124_CLK_PLL_P>; + assigned-clock-rates = <204000000>; + + max-frequency = <82000000>; + keep-power-in-suspend; + bus-width = <4>; + non-removable; + + sd-uhs-sdr104; + mmc-ddr-1_8v; + + mmc-pwrseq = <&brcm_wifi_pwrseq>; + vmmc-supply = <&vdd_3v3_sys>; + vqmmc-supply = <&vdd_1v8_vio>; + + /* BCM4354XKUBG */ + wifi@1 { + compatible = "brcm,bcm4354-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + clocks = <&clk32k_pmic>; + clock-names = "lpo"; + + interrupt-parent = <&gpio>; + interrupts = ; + interrupt-names = "host-wake"; + }; + }; + + /* MicroSD */ + sdmmc3: mmc@700b0400 { + status = "okay"; + bus-width = <4>; + + sd-uhs-sdr104; + mmc-ddr-1_8v; + + cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; + power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; + + vmmc-supply = <&vdd_hv_sdmmc>; + vqmmc-supply = <&vddio_usd>; + }; + + /* eMMC */ + sdmmc4: mmc@700b0600 { + status = "okay"; + bus-width = <8>; + + mmc-hs200-1_8v; + non-removable; + + vmmc-supply = <&vdd_hv_sdmmc>; + vqmmc-supply = <&vdd_1v8_vio>; + }; + + /* CPU DFLL clock */ + clock@70110000 { + status = "okay"; + vdd-cpu-supply = <&vdd_cpu>; + nvidia,i2c-fs-rate = <400000>; + }; + + ahub@70300000 { + /* HIFI CODEC */ + i2s@70301000 { /* i2s0 */ + status = "okay"; + }; + + /* LEFT SPK */ + i2s@70301100 { /* i2s1 */ + status = "okay"; + }; + + /* RIGHT SPK */ + i2s@70301200 { /* i2s2 */ + status = "okay"; + }; + + /* BT SCO */ + i2s@70301300 { /* i2s3 */ + status = "okay"; + }; + }; + + usb1: usb@7d000000 { + compatible = "nvidia,tegra124-udc"; + status = "okay"; + dr_mode = "otg"; + + hnp-disable; + srp-disable; + adp-disable; + + usb-role-switch; + extcon = <&bq24192>, <&palmas_extcon>; /* vbus, id */ + vbus-supply = <&usb_otg_vbus>; + + port { + usb_in: endpoint { + remote-endpoint = <&connector_out>; + }; + }; + }; + + usb-phy@7d000000 { + status = "okay"; + dr_mode = "otg"; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; + vbus-supply = <&avdd_usb>; + }; + + battery: battery-cell { + compatible = "simple-battery"; + device-chemistry = "lithium-ion-polymer"; + + charge-full-design-microamp-hours = <6520000>; + energy-full-design-microwatt-hours = <2478000>; + + voltage-min-design-microvolt = <4300000>; + voltage-max-design-microvolt = <4350000>; + + precharge-current-microamp = <256000>; + charge-term-current-microamp = <400000>; + + operating-range-celsius = <0 45>; + }; + + clk32k_in: clock-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ref-oscillator"; + }; + + connector { + compatible = "usb-b-connector"; + type = "micro"; + + port { + connector_out: endpoint { + remote-endpoint = <&usb_in>; + }; + }; + }; + + cpus { + cpu0: cpu@0 { + vdd-cpu-supply = <&vdd_cpu>; + #cooling-cells = <2>; + }; + + cpu1: cpu@1 { + #cooling-cells = <2>; + }; + + cpu2: cpu@2 { + #cooling-cells = <2>; + }; + + cpu3: cpu@3 { + #cooling-cells = <2>; + }; + }; + + extcon-keys { + compatible = "gpio-keys"; + + switch-back-hall-sensor { + label = "Hall sensor (back)"; + gpios = <&gpio TEGRA_GPIO(W, 3) GPIO_ACTIVE_LOW>; + linux,code = ; + linux,can-disable; + wakeup-source; + }; + + switch-front-hall-sensor { + label = "Hall sensor (front)"; + gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; + linux,code = ; + linux,can-disable; + wakeup-source; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <10>; + wakeup-source; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <10>; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&gpio TEGRA_GPIO(Q, 6) GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <10>; + }; + }; + + led-controller { + compatible = "pwm-leds"; + + led-button { + color = ; + function = LED_FUNCTION_BACKLIGHT; + + pwms = <&pwm 1 10000>; + max-brightness = <100>; + }; + }; + + brcm_wifi_pwrseq: pwrseq-wifi { + compatible = "mmc-pwrseq-simple"; + + reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; + + post-power-on-delay-ms = <300>; + power-off-delay-us = <300>; + }; + + vdd_3v3_sys: regulator-3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vddio_1v8_bl: regulator-bl-io { + compatible = "regulator-fixed"; + regulator-name = "vddio_1v8_bl"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_1v8_vio>; + }; + + vdd_lcd_io: regulator-lcd-vio { + compatible = "regulator-fixed"; + regulator-name = "dvdd_lcd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_1v8_vio>; + }; + + vsp_5v5_lcd: regulator-vsp { + compatible = "regulator-fixed"; + regulator-name = "avdd_lcd_vsp"; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vsn_5v5_lcd: regulator-vsn { + compatible = "regulator-fixed"; + regulator-name = "avdd_lcd_vsn"; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_2v8_tp: regulator-vtp { + compatible = "regulator-fixed"; + regulator-name = "vdd_2v8_tp"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_smps10_out2>; + }; + + iovdd_1v8_cam: regulator-iovdd-cam { + compatible = "regulator-fixed"; + regulator-name = "iovdd_1v8_cam"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&palmas_gpio 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_1v8_vio>; + }; + + dvdd_1v2_cam: regulator-dvdd-cam { + compatible = "regulator-fixed"; + regulator-name = "dvdd_1v2_cam"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&palmas_gpio 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_1v8_vio>; + }; + + vdd_3v3_hph: regulator-hph { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3_hph"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + thermal-zones { + /* + * TMP451 has two sensors: + * + * 0: internal that monitors ambient/skin temperature + * 1: external that is connected to the CPU's diode + * + * Ideally we should use userspace thermal governor, + * but it's a much more complex solution. The "skin" + * zone exists as a simpler solution which prevents + * tablet from getting too hot from a user's tactile + * perspective. The CPU zone is intended to protect + * silicon from damage. + */ + + tmp451-skin-thermal { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <10000>; /* milliseconds */ + + thermal-sensors = <&temp_sensor 0>; + + trips { + skip_alert_trip: skin-alert { + /* throttle at 50C until temperature drops to 49.5C */ + temperature = <50000>; + hysteresis = <500>; + type = "passive"; + }; + + skin-crit { + /* shut down at 85C */ + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map-skip { + trip = <&skip_alert_trip>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + tmp451-cpu-thermal { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <10000>; /* milliseconds */ + + thermal-sensors = <&temp_sensor 1>; + + trips { + cpu_alert_trip: cpu-alert { + /* throttle at 85C until temperature drops to 84.5C */ + temperature = <85000>; + hysteresis = <500>; + type = "passive"; + }; + + cpu-crit { + /* shut down at 95C */ + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map-cpu { + trip = <&cpu_alert_trip>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/nvidia/tegra124.dtsi b/arch/arm/boot/dts/nvidia/tegra124.dtsi index ec4f0e346b2bf0..ce4efa1de509b7 100644 --- a/arch/arm/boot/dts/nvidia/tegra124.dtsi +++ b/arch/arm/boot/dts/nvidia/tegra124.dtsi @@ -103,6 +103,45 @@ host1x@50000000 { ranges = <0 0x54000000 0 0x54000000 0 0x01000000>; + vi@54080000 { + compatible = "nvidia,tegra124-vi"; + reg = <0x0 0x54080000 0x0 0x00040000>; + interrupts = ; + clocks = <&tegra_car TEGRA124_CLK_VI>; + resets = <&tegra_car 20>; + reset-names = "vi"; + + iommus = <&mc TEGRA_SWGROUP_VI>; + + status = "disabled"; + }; + + isp@54600000 { + compatible = "nvidia,tegra124-isp"; + reg = <0x0 0x54600000 0x0 0x00040000>; + interrupts = ; + clocks = <&tegra_car TEGRA124_CLK_ISP>; + resets = <&tegra_car TEGRA124_CLK_ISP>; + reset-names = "isp"; + + iommus = <&mc TEGRA_SWGROUP_ISP2>; + + status = "disabled"; + }; + + isp@54680000 { + compatible = "nvidia,tegra124-isp"; + reg = <0x0 0x54680000 0x0 0x00040000>; + interrupts = ; + clocks = <&tegra_car TEGRA124_CLK_ISPB>; + resets = <&tegra_car TEGRA124_CLK_ISPB>; + reset-names = "isp"; + + iommus = <&mc TEGRA_SWGROUP_ISP2B>; + + status = "disabled"; + }; + dc@54200000 { compatible = "nvidia,tegra124-dc"; reg = <0x0 0x54200000 0x0 0x00040000>; @@ -209,6 +248,31 @@ dsib: dsi@54400000 { #size-cells = <0>; }; + msenc@544c0000 { + compatible = "nvidia,tegra124-msenc"; + reg = <0x0 0x544c0000 0x0 0x00040000>; + interrupts = ; + clocks = <&tegra_car TEGRA124_CLK_MSENC>; + resets = <&tegra_car TEGRA124_CLK_MSENC>; + reset-names = "mpe"; + + iommus = <&mc TEGRA_SWGROUP_MSENC>; + + status = "disabled"; + }; + + tsec@54500000 { + compatible = "nvidia,tegra124-tsec"; + reg = <0x0 0x54500000 0x0 0x00040000>; + interrupts = ; + clocks = <&tegra_car TEGRA124_CLK_TSEC>; + resets = <&tegra_car TEGRA124_CLK_TSEC>; + + iommus = <&mc TEGRA_SWGROUP_TSEC>; + + status = "disabled"; + }; + sor@54540000 { compatible = "nvidia,tegra124-sor"; reg = <0x0 0x54540000 0x0 0x00040000>; diff --git a/arch/arm/boot/dts/nvidia/tegra20.dtsi b/arch/arm/boot/dts/nvidia/tegra20.dtsi index 882adb7f2f2639..c60fc1971188c5 100644 --- a/arch/arm/boot/dts/nvidia/tegra20.dtsi +++ b/arch/arm/boot/dts/nvidia/tegra20.dtsi @@ -64,7 +64,7 @@ mpe@54040000 { vi@54080000 { compatible = "nvidia,tegra20-vi"; - reg = <0x54080000 0x00040000>; + reg = <0x54080000 0x00000800>; interrupts = ; clocks = <&tegra_car TEGRA20_CLK_VI>; resets = <&tegra_car 20>; @@ -72,6 +72,23 @@ vi@54080000 { power-domains = <&pd_venc>; operating-points-v2 = <&vi_dvfs_opp_table>; status = "disabled"; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x0 0x54080000 0x4000>; + + csi: csi@800 { + compatible = "nvidia,tegra20-csi"; + reg = <0x800 0x200>; + clocks = <&tegra_car TEGRA20_CLK_CSI>; + power-domains = <&pd_venc>; + #nvidia,mipi-calibrate-cells = <1>; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; }; epp@540c0000 { diff --git a/arch/arm/boot/dts/nvidia/tegra30.dtsi b/arch/arm/boot/dts/nvidia/tegra30.dtsi index 2a4d93db81347e..4c4e6097c9163b 100644 --- a/arch/arm/boot/dts/nvidia/tegra30.dtsi +++ b/arch/arm/boot/dts/nvidia/tegra30.dtsi @@ -150,8 +150,8 @@ mpe@54040000 { }; vi@54080000 { - compatible = "nvidia,tegra30-vi"; - reg = <0x54080000 0x00040000>; + compatible = "nvidia,tegra30-vi", "nvidia,tegra20-vi"; + reg = <0x54080000 0x00000800>; interrupts = ; clocks = <&tegra_car TEGRA30_CLK_VI>; resets = <&tegra_car 20>; @@ -162,6 +162,26 @@ vi@54080000 { iommus = <&mc TEGRA_SWGROUP_VI>; status = "disabled"; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x0 0x54080000 0x4000>; + + csi: csi@800 { + compatible = "nvidia,tegra30-csi"; + reg = <0x800 0x200>; + clocks = <&tegra_car TEGRA30_CLK_CSI>, + <&tegra_car TEGRA30_CLK_CSIA_PAD>, + <&tegra_car TEGRA30_CLK_CSIB_PAD>; + clock-names = "csi", "csia-pad", "csib-pad"; + power-domains = <&pd_venc>; + #nvidia,mipi-calibrate-cells = <1>; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; }; epp@540c0000 { diff --git a/arch/arm/boot/dts/nxp/imx/e70k02.dtsi b/arch/arm/boot/dts/nxp/imx/e70k02.dtsi index dcc3c9d488a883..3bb11c5a63536d 100644 --- a/arch/arm/boot/dts/nxp/imx/e70k02.dtsi +++ b/arch/arm/boot/dts/nxp/imx/e70k02.dtsi @@ -69,6 +69,14 @@ memory@80000000 { reg = <0x80000000 0x20000000>; }; + epd_pmic_supply: regulator-epd-pmic-in { + compatible = "regulator-fixed"; + regulator-name = "epd_pmic_supply"; + gpio = <&gpio2 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <20000>; + }; + reg_wifi: regulator-wifi { compatible = "regulator-fixed"; regulator-name = "SD3_SPWR"; @@ -133,7 +141,22 @@ touchscreen@24 { vdd-supply = <&ldo5_reg>; }; - /* TODO: SY7636 PMIC for E Ink at 0x62 */ + sy7636: pmic@62 { + compatible = "silergy,sy7636a"; + reg = <0x62>; + enable-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; + vcom-en-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + epd-pwr-good-gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>; + vin-supply = <&epd_pmic_supply>; + + #thermal-sensor-cells = <0>; + + regulators { + reg_epdpmic: vcom { + regulator-name = "vcom"; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts index b8048e12e3d9ab..5398e9067e60f9 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts @@ -248,14 +248,14 @@ ledr3: led@9 { linux,default-trigger = "nand-disk"; }; - ledg3: led@10 { - reg = <10>; + ledg3: led@a { + reg = <0xa>; label = "system:green3:live"; linux,default-trigger = "heartbeat"; }; - ledb3: led@11 { - reg = <11>; + ledb3: led@b { + reg = <0xb>; label = "system:blue3:cpu"; linux,default-trigger = "cpu0"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts b/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts index 43ff5eafb2bb81..91c63d1f260436 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts @@ -398,13 +398,13 @@ leds { #size-cells = <0>; led-control = <0x0 0x0 0x3f83f8 0x0>; - sysled0@3 { + led@3 { reg = <3>; label = "system:green:status"; linux,default-trigger = "default-on"; }; - sysled1@4 { + led@4 { reg = <4>; label = "system:green:act"; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts b/arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts index 26eb7a9506e489..1598bf4f49911d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts +++ b/arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts @@ -225,13 +225,13 @@ leds { #size-cells = <0>; led-control = <0x0 0x0 0x3f83f8 0x0>; - sysled3: led3@3 { + sysled3: led@3 { reg = <3>; label = "system:red:power"; linux,default-trigger = "default-on"; }; - sysled4: led4@4 { + sysled4: led@4 { reg = <4>; label = "system:green:act"; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-zii-scu3-esb.dts b/arch/arm/boot/dts/nxp/imx/imx51-zii-scu3-esb.dts index 19a3b142c96491..c2dcfd44c445ba 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-zii-scu3-esb.dts +++ b/arch/arm/boot/dts/nxp/imx/imx51-zii-scu3-esb.dts @@ -153,13 +153,13 @@ leds { #size-cells = <0>; led-control = <0x0 0x0 0x3f83f8 0x0>; - sysled3: led3@3 { + sysled3: led@3 { reg = <3>; label = "system:red:power"; linux,default-trigger = "default-on"; }; - sysled4: led4@4 { + sysled4: led@4 { reg = <4>; label = "system:green:act"; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts b/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts index 2892e457fea7ef..e45a97d3f449de 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-ppd.dts @@ -537,6 +537,8 @@ mma8453q: accelerometer@1c { mpl3115: pressure-sensor@60 { compatible = "fsl,mpl3115"; reg = <0x60>; + vdd-supply = <®_3v3>; + vddio-supply = <®_3v3>; }; eeprom: eeprom@50 { diff --git a/arch/arm/boot/dts/nxp/imx/imx53-qsrb.dts b/arch/arm/boot/dts/nxp/imx/imx53-qsrb.dts index 2f06ad61a76650..6938ad6dbc2ce8 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-qsrb.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-qsrb.dts @@ -28,6 +28,7 @@ pmic: mc34708@8 { reg = <0x08>; interrupt-parent = <&gpio5>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; + fsl,mc13xxx-uses-rtc; regulators { sw1_reg: sw1a { regulator-name = "SW1"; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-usbarmory.dts b/arch/arm/boot/dts/nxp/imx/imx53-usbarmory.dts index acc44010d51069..3ad9db4b144254 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-usbarmory.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-usbarmory.dts @@ -1,47 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) /* * USB armory MkI device tree file * https://inversepath.com/usbarmory * * Copyright (C) 2015, Inverse Path * Andrej Rosano - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts index a7400d42475b49..bf8e07f971435d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts @@ -20,6 +20,7 @@ memory@10000000 { panel: panel { compatible = "lg,lb070wv8"; backlight = <&backlight>; + power-supply = <®_3p3v>; enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; port { diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5v2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5v2.dtsi index 590dcc0953cc7b..5dc7f1f9ca1783 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5v2.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b1x5v2.dtsi @@ -47,7 +47,8 @@ &i2c5 { mpl3115a2: pressure-sensor@60 { compatible = "fsl,mpl3115"; reg = <0x60>; - + vdd-supply = <®_3v3>; + vddio-supply = <®_3v3>; /* * The MPL3115 interrupts are connected to pin 22 and 23 * of &tca6424a, but the binding does not yet support diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-lanmcu.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-lanmcu.dts index 7c62db91173b78..47a6d63c8e04cf 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-lanmcu.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-lanmcu.dts @@ -72,6 +72,7 @@ led-0 { panel { compatible = "edt,etm0700g0bdh6"; backlight = <&backlight>; + power-supply = <®_panel>; port { panel_in: endpoint { @@ -89,6 +90,13 @@ reg_otg_vbus: regulator-otg-vbus { enable-active-high; }; + reg_panel: regulator-panel { + compatible = "regulator-fixed"; + regulator-name = "panel"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + usdhc2_wifi_pwrseq: usdhc2-wifi-pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dts index dfa8110b1d97b1..0ef24a07dedf98 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-plym2m.dts @@ -123,7 +123,7 @@ alert { }; }; - touch-thermal0 { + touch-0-thermal { polling-delay = <20000>; polling-delay-passive = <0>; thermal-sensors = <&touch_temp0>; @@ -137,7 +137,7 @@ alert { }; }; - touch-thermal1 { + touch-1-thermal { polling-delay = <20000>; polling-delay-passive = <0>; thermal-sensors = <&touch_temp1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-prtvt7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-prtvt7.dts index 29dc6875ab6680..353f7097cb7e02 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-prtvt7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-prtvt7.dts @@ -55,7 +55,7 @@ display_out: endpoint { iio-hwmon { compatible = "iio-hwmon"; - io-channels = <&vdiv_vaccu>; + io-channels = <&vdiv_vaccu 0>; }; keys { @@ -256,7 +256,7 @@ alert { }; }; - touch-thermal0 { + touch-0-thermal { polling-delay = <20000>; polling-delay-passive = <0>; thermal-sensors = <&touch_temp0>; @@ -270,7 +270,7 @@ alert { }; }; - touch-thermal1 { + touch-1-thermal { polling-delay = <20000>; polling-delay-passive = <0>; thermal-sensors = <&touch_temp1>; @@ -318,7 +318,7 @@ vdiv_vaccu: voltage-divider-vaccu { io-channels = <&adc_ts 2>; output-ohms = <2500>; full-ohms = <64000>; - #io-channel-cells = <0>; + #io-channel-cells = <1>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi index 7a3b96315eaf55..d5baec5e7a7824 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi @@ -14,6 +14,7 @@ / { memory@10000000 { reg = <0x10000000 0x40000000>; + device_type = "memory"; }; reg_3p3v: 3p3v { diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dts index 4875afadb63005..76b0007d20ad22 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-victgo.dts @@ -35,7 +35,7 @@ key-enter { iio-hwmon { compatible = "iio-hwmon"; - io-channels = <&vdiv_vaccu>, <&vdiv_hitch_pos>; + io-channels = <&vdiv_vaccu 0>, <&vdiv_hitch_pos 0>; }; panel { @@ -84,7 +84,7 @@ alert { }; }; - touch-thermal0 { + touch-0-thermal { polling-delay = <20000>; polling-delay-passive = <0>; thermal-sensors = <&touch_temp0>; @@ -98,7 +98,7 @@ alert { }; }; - touch-thermal1 { + touch-1-thermal { polling-delay = <20000>; polling-delay-passive = <0>; thermal-sensors = <&touch_temp1>; @@ -147,7 +147,7 @@ vdiv_vaccu: voltage-divider-vaccu { io-channels = <&adc_ts 2>; output-ohms = <2500>; full-ohms = <64000>; - #io-channel-cells = <0>; + #io-channel-cells = <1>; }; vdiv_hitch_pos: voltage-divider-hitch-pos { @@ -155,7 +155,7 @@ vdiv_hitch_pos: voltage-divider-hitch-pos { io-channels = <&adc_ts 6>; output-ohms = <3300>; full-ohms = <13300>; - #io-channel-cells = <0>; + #io-channel-cells = <1>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi index 8bc6376d0dc102..4a5736526927cf 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi @@ -279,28 +279,32 @@ leds: led-controller@30 { #size-cells = <0>; status = "disabled"; - led@0 { - chan-name = "R"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - reg = <0>; - color = ; - }; + multi-led@0 { + #address-cells = <1>; + #size-cells = <0>; + color = ; + function = LED_FUNCTION_INDICATOR; + + led@0 { + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + reg = <0>; + color = ; + }; - led@1 { - chan-name = "G"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - reg = <1>; - color = ; - }; + led@1 { + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + reg = <1>; + color = ; + }; - led@2 { - chan-name = "B"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - reg = <2>; - color = ; + led@2 { + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + reg = <2>; + color = ; + }; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-lynx.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-lynx.dts index 5c2cd517589bf7..0a6b668428a341 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-lynx.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-lynx.dts @@ -21,6 +21,10 @@ &backlight { status = "okay"; }; +&beeper { + status = "okay"; +}; + &lcd_display { status = "okay"; }; @@ -37,6 +41,10 @@ &pwm1 { status = "okay"; }; +&pwm3 { + status = "okay"; +}; + ®_usb_h1_vbus { status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi index 2f42c56c21f637..6e49e1ccf6fc32 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp43-common.dtsi @@ -26,6 +26,12 @@ backlight: backlight { status = "disabled"; }; + beeper: beeper { + compatible = "pwm-beeper"; + pwms = <&pwm3 0 500000 0>; + status = "disabled"; + }; + gpio_keys: gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -272,28 +278,32 @@ leds: led-controller@30 { #size-cells = <0>; status = "disabled"; - led@0 { - chan-name = "R"; - led-cur = /bits/ 8 <0x6e>; - max-cur = /bits/ 8 <0xc8>; - reg = <0>; - color = ; - }; + multi-led@0 { + #address-cells = <1>; + #size-cells = <0>; + color = ; + function = LED_FUNCTION_INDICATOR; + + led@0 { + led-cur = /bits/ 8 <0x6e>; + max-cur = /bits/ 8 <0xc8>; + reg = <0>; + color = ; + }; - led@1 { - chan-name = "G"; - led-cur = /bits/ 8 <0xbe>; - max-cur = /bits/ 8 <0xc8>; - reg = <1>; - color = ; - }; + led@1 { + led-cur = /bits/ 8 <0xbe>; + max-cur = /bits/ 8 <0xc8>; + reg = <1>; + color = ; + }; - led@2 { - chan-name = "B"; - led-cur = /bits/ 8 <0xbe>; - max-cur = /bits/ 8 <0xc8>; - reg = <2>; - color = ; + led@2 { + led-cur = /bits/ 8 <0xbe>; + max-cur = /bits/ 8 <0xc8>; + reg = <2>; + color = ; + }; }; }; @@ -466,6 +476,13 @@ MX6QDL_PAD_GPIO_9__PWM1_OUT 0x8 >; }; + pinctrl_sound: soundgrp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0 + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x8 + >; + }; + pinctrl_touch: touchgrp { fsl,pins = < MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b098 @@ -551,6 +568,12 @@ &pwm1 { status = "disabled"; }; +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sound>; + status = "disabled"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi index 53013b12c2ecbf..02d66523668d26 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi @@ -337,7 +337,7 @@ rtc@32 { pinctrl-0 = <&pinctrl_rtc>; reg = <0x32>; interrupt-parent = <&gpio4>; - interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts b/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts index d3f14b4d3b51e1..929def2bb35ebb 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-bosch-acc.dts @@ -46,6 +46,7 @@ backlight_lvds: backlight-lvds { panel { compatible = "dataimage,fg1001l0dsswmg01"; backlight = <&backlight_lvds>; + power-supply = <®_lcd>; port { panel_in: endpoint { diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi index e1d0c6e123fd72..1e2266a2368be7 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi @@ -195,6 +195,8 @@ ads7830: ads7830@48 { mma8453: mma8453@1c { compatible = "fsl,mma8453"; reg = <0x1c>; + vdd-supply = <®_3p3v>; + vddio-supply = <®_3p3v>; }; }; @@ -211,6 +213,8 @@ eeprom: eeprom@50 { mpl3115: mpl3115@60 { compatible = "fsl,mpl3115"; reg = <0x60>; + vdd-supply = <®_3p3v>; + vddio-supply = <®_3p3v>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts index 299106fbe51c4a..13245af8f74d4f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-cm-fx6.dts @@ -73,7 +73,7 @@ awnh387_pwrseq: pwrseq { reset-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; }; - reg_pcie_power_on_gpio: regulator-pcie-power-on-gpio { + reg_pcie_power_on_gpio: regulator-pcie-power-on { compatible = "regulator-fixed"; regulator-name = "regulator-pcie-power-on-gpio"; regulator-min-microvolt = <3300000>; @@ -99,6 +99,34 @@ reg_usb_otg_vbus: usb_otg_vbus { enable-active-high; }; + avdd_reg: regulator-avdd { + compatible = "regulator-fixed"; + regulator-name = "avdd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + hpvdd_reg: regulator-hpvdd { + compatible = "regulator-fixed"; + regulator-name = "hpvdd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + dcvdd_reg: regulator-dcvdd { + compatible = "regulator-fixed"; + regulator-name = "dcvdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + dbvdd_reg: regulator-dbvdd { + compatible = "regulator-fixed"; + regulator-name = "dbvdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + sound-analog { compatible = "simple-audio-card"; simple-audio-card,name = "On-board analog audio"; @@ -307,6 +335,10 @@ wm8731: codec@1a { #sound-dai-cells = <0>; compatible = "wlf,wm8731"; reg = <0x1a>; + AVDD-supply = <&avdd_reg>; + HPVDD-supply = <&hpvdd_reg>; + DCVDD-supply = <&dcvdd_reg>; + DBVDD-supply = <&dbvdd_reg>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts index 17fabff80e903f..cbe580dec182e1 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts @@ -236,9 +236,12 @@ stmpe1: stmpe1601@40 { vcc-supply = <&sw2_reg>; vio-supply = <&sw2_reg>; - stmpe_gpio1: stmpe_gpio { + stmpe_gpio1: gpio { #gpio-cells = <2>; compatible = "st,stmpe-gpio"; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; }; }; @@ -250,9 +253,12 @@ stmpe2: stmpe1601@44 { vcc-supply = <&sw2_reg>; vio-supply = <&sw2_reg>; - stmpe_gpio2: stmpe_gpio { + stmpe_gpio2: gpio { #gpio-cells = <2>; compatible = "st,stmpe-gpio"; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-evi.dts b/arch/arm/boot/dts/nxp/imx/imx6q-evi.dts index 78d941fef5dfb2..c936180ed32a88 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-evi.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-evi.dts @@ -55,6 +55,13 @@ memory@10000000 { reg = <0x10000000 0x40000000>; }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_usbh1_vbus: regulator-usbhubreset { compatible = "regulator-fixed"; regulator-name = "usbh1_vbus"; @@ -81,6 +88,7 @@ reg_usb_otg_vbus: regulator-usbotgvbus { panel { compatible = "sharp,lq101k1ly04"; + power-supply = <®_3v3>; port { panel_in: endpoint { @@ -124,7 +132,7 @@ &ecspi5 { pinctrl-0 = <&pinctrl_ecspi5 &pinctrl_ecspi5cs>; status = "okay"; - eeprom: m95m02@1 { + eeprom: eeprom@1 { compatible = "st,m95m02", "atmel,at25"; size = <262144>; pagesize = <256>; @@ -134,7 +142,7 @@ eeprom: m95m02@1 { }; pb_rtc: rtc@3 { - compatible = "nxp,rtc-pcf2123"; + compatible = "nxp,pcf2123"; spi-max-frequency = <2450000>; spi-cs-high; reg = <3>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap10.dts b/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap10.dts index 02aca1e28ce3fe..1ad3bdcea4a349 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap10.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap10.dts @@ -16,6 +16,7 @@ / { panel { compatible = "ampire,am-1280800n3tzqw-t00h"; backlight = <&backlight_lvds>; + power-supply = <®_3p3v>; port { panel_in: endpoint { diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap12.dts b/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap12.dts index 241811c52b6246..9e1c64da0b30ad 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap12.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-icore-ofcap12.dts @@ -16,6 +16,7 @@ / { panel { compatible = "koe,tx31d200vm0baa"; backlight = <&backlight_lvds>; + power-supply = <®_3p3v>; port { panel_in: endpoint { diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts b/arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts index 56b77cc0af2be5..b8567167779cb7 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-pistachio.dts @@ -145,6 +145,7 @@ backlight_lvds: backlight-lvds { panel { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds>; + power-supply = <®_3p3v>; port { panel_in: endpoint { @@ -324,8 +325,6 @@ &i2c3 { }; &iomuxc { - pinctrl-names = "default"; - pinctrl_hog: hoggrp { fsl,pins = < MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /*pcie power*/ diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts b/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts index fb81bd8ba03516..73ed40ae5a7bc2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-prti6q.dts @@ -57,6 +57,7 @@ led-debug1 { panel { compatible = "kyo,tcg121xglp"; backlight = <&backlight_lcd>; + power-supply = <®_3v3>; port { panel_in: endpoint { @@ -72,6 +73,13 @@ reg_1v8: regulator-1v8 { regulator-max-microvolt = <1800000>; }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_wifi: regulator-wifi { compatible = "regulator-fixed"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts b/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts index 5353a0c2442050..3bd0e2c9e57aca 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-tbs2910.dts @@ -37,7 +37,7 @@ fan { 3000 1>; }; - ir_recv { + ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio3 18 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts b/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts index aae81feee00dba..c78f101c3cc122 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-utilite-pro.dts @@ -326,11 +326,14 @@ &ipu1_di0_disp0 { &pcie { pcie@0,0 { reg = <0x000000 0 0 0 0>; + device_type = "pci"; #address-cells = <3>; #size-cells = <2>; + bus-range = <0x00 0xff>; + ranges; /* non-removable i211 ethernet card */ - eth1: intel,i211@pcie0,0 { + eth1: ethernet@0,0 { reg = <0x010000 0 0 0 0>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts index 18a620832a2ad3..a55644529c67fe 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts @@ -8,6 +8,7 @@ /dts-v1/; +#include "imx6q.dtsi" #include "imx6qdl-var-som.dtsi" #include diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-pegasus.dts b/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-pegasus.dts index ec6651ba4ba2e5..7332f271898264 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-pegasus.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-yapp4-pegasus.dts @@ -17,6 +17,10 @@ memory@10000000 { }; }; +&beeper { + status = "okay"; +}; + &gpio_oled { status = "okay"; }; @@ -37,6 +41,10 @@ &oled_1309 { status = "okay"; }; +&pwm3 { + status = "okay"; +}; + ®_pu { regulator-always-on; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi index 419d85b5a66061..8a0ce250e57607 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi @@ -589,7 +589,7 @@ stmpe_ts: touchscreen { st,touch-det-delay = <5>; }; - stmpe_adc: stmpe_adc { + stmpe_adc: adc { compatible = "st,stmpe-adc"; /* forbid to use ADC channels 3-0 (touch) */ st,norequest-mask = <0x0F>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi index ea92b2b5c50d93..e9d5bbb43145f8 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi @@ -462,7 +462,6 @@ reg_vdd_arm: sw3 { regulator-ramp-delay = <7000>; regulator-boot-on; regulator-always-on; - linux,phandle = <®_vdd_arm>; }; /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */ diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi index b518bcb6b7a996..01f77142e153b2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi @@ -360,7 +360,6 @@ reg_vdd_arm: sw3 { regulator-ramp-delay = <7000>; regulator-boot-on; regulator-always-on; - linux,phandle = <®_vdd_arm>; }; /* VDD_SOC (1+R1/R2 = 1.635) */ @@ -372,7 +371,6 @@ reg_vdd_soc: sw4 { regulator-ramp-delay = <7000>; regulator-boot-on; regulator-always-on; - linux,phandle = <®_vdd_soc>; }; /* VDD_1P0 (1+R1/R2 = 1.38): */ diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi index 8d471450d5c5c7..610b2a72fe8255 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi @@ -127,6 +127,7 @@ backlight_lvds0: backlight-lvds0 { panel-lvds0 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds0>; + power-supply = <®_3p3v>; port { panel_in_lvds0: endpoint { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi index c727aac257f9c3..ef0c26688446ef 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi @@ -135,13 +135,13 @@ i2c-mux-2 { i2c-parent = <&i2c2>; idle-state = <0>; - i2c2mux@1 { + i2c@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; }; - i2c2mux@2 { + i2c@2 { reg = <2>; #address-cells = <1>; #size-cells = <0>; @@ -158,7 +158,7 @@ i2c-mux-3 { i2c-parent = <&i2c3>; idle-state = <0>; - i2c3mux@1 { + i2c@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; @@ -237,6 +237,7 @@ lcd_display_out: endpoint { panel-lcd { compatible = "okaya,rs800480t-7x0gp"; backlight = <&backlight_lcd>; + power-supply = <®_3p3v>; port { lcd_panel_in: endpoint { @@ -248,6 +249,7 @@ lcd_panel_in: endpoint { panel-lvds0 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds0>; + power-supply = <®_3p3v>; port { panel_in_lvds0: endpoint { @@ -259,6 +261,7 @@ panel_in_lvds0: endpoint { panel-lvds1 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds1>; + power-supply = <®_3p3v>; port { panel_in_lvds1: endpoint { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi index 806af7f60419e7..03fe053880ca6e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi @@ -114,6 +114,7 @@ lcd_display_out: endpoint { panel-lcd { compatible = "okaya,rs800480t-7x0gp"; backlight = <&backlight_lcd>; + power-supply = <®_3p3v>; port { lcd_panel_in: endpoint { @@ -125,6 +126,7 @@ lcd_panel_in: endpoint { panel-lvds0 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds0>; + power-supply = <®_3p3v>; port { panel_in_lvds0: endpoint { @@ -136,6 +138,7 @@ panel_in_lvds0: endpoint { panel-lvds1 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds1>; + power-supply = <®_3p3v>; port { panel_in_lvds1: endpoint { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi index c71aa7498acf4a..6a353a99e13daa 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi @@ -179,6 +179,7 @@ lcd_display_out: endpoint { panel-lcd { compatible = "okaya,rs800480t-7x0gp"; backlight = <&backlight_lcd>; + power-supply = <®_3p3v>; port { lcd_panel_in: endpoint { @@ -190,6 +191,7 @@ lcd_panel_in: endpoint { panel-lvds0 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds>; + power-supply = <®_3p3v>; port { panel_in: endpoint { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi index f7abc17c7c93a7..3b7d01065e87b2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi @@ -8,6 +8,7 @@ #include #include #include +#include / { chosen { @@ -207,6 +208,7 @@ lcd_display_out: endpoint { panel-lcd { compatible = "okaya,rs800480t-7x0gp"; backlight = <&backlight_lcd>; + power-supply = <®_3p3v>; port { lcd_panel_in: endpoint { @@ -218,6 +220,7 @@ lcd_panel_in: endpoint { panel-lvds0 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds>; + power-supply = <®_3p3v>; port { panel_in: endpoint { @@ -360,7 +363,6 @@ ov5642: camera@42 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ov5642>; clocks = <&clks IMX6QDL_CLK_CKO2>; - clock-names = "xclk"; reg = <0x42>; reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; powerdown-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; @@ -370,6 +372,7 @@ ov5642: camera@42 { port { ov5642_to_ipu1_csi0_mux: endpoint { remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-type = ; bus-width = <8>; hsync-active = <1>; vsync-active = <1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi index e8368c6b27ef3b..ba29720e3f7205 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi @@ -6,6 +6,7 @@ #include #include #include +#include / { chosen { @@ -17,6 +18,13 @@ memory@10000000 { reg = <0x10000000 0x40000000>; }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "reg-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_usb_otg_vbus: regulator-usb-otg-vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg_vbus"; @@ -139,6 +147,7 @@ led-red { panel { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds>; + power-supply = <®_3v3>; port { panel_in: endpoint { @@ -278,7 +287,6 @@ ov5642: camera@3c { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ov5642>; clocks = <&clks IMX6QDL_CLK_CKO>; - clock-names = "xclk"; reg = <0x3c>; DOVDD-supply = <&vgen4_reg>; /* 1.8v */ AVDD-supply = <&vgen3_reg>; /* 2.8v, rev C board is VGEN3 @@ -291,6 +299,7 @@ rev B board is VGEN5 */ port { ov5642_to_ipu1_csi0_mux: endpoint { remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-type = ; bus-width = <8>; hsync-active = <1>; vsync-active = <1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi index 6ab71a729fd85d..c93dbc595ef6ec 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu.dtsi @@ -69,7 +69,7 @@ switch: switch@0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_switch>; interrupt-parent = <&gpio3>; - interrupt = <30 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <30 IRQ_TYPE_LEVEL_HIGH>; reset-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; reg = <0>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-ts4900.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts4900.dtsi index f88da757edda5a..948b612496a5b7 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-ts4900.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts4900.dtsi @@ -140,7 +140,7 @@ gpio8: gpio@28 { reg = <0x28>; #gpio-cells = <2>; gpio-controller; - ngpio = <32>; + ngpios = <32>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi index dd4e5bce4a55dc..8232f4ea275265 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-mb7.dtsi @@ -16,16 +16,19 @@ backlight1 { lcd-panel { compatible = "edt,et057090dhu"; + power-supply = <®_lcd1_pwr>; pixelclk-active = <0>; }; lvds0-panel { compatible = "edt,etml1010g0dka"; + power-supply = <®_lcd1_pwr>; pixelclk-active = <0>; }; lvds1-panel { compatible = "edt,etml1010g0dka"; + power-supply = <®_lcd1_pwr>; pixelclk-active = <0>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi index 2bff5f92242ac6..fef34ce961d5f8 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi @@ -9,9 +9,6 @@ * Copyright 2022 Bootlin */ -/dts-v1/; - -#include "imx6q.dtsi" #include #include #include diff --git a/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-pegasus-plus.dts b/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-pegasus-plus.dts index 4a961a33bf2d0f..770a85e0561cf8 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-pegasus-plus.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6qp-yapp4-pegasus-plus.dts @@ -17,6 +17,10 @@ memory@10000000 { }; }; +&beeper { + status = "okay"; +}; + &gpio_oled { status = "okay"; }; @@ -37,6 +41,10 @@ &oled_1309 { status = "okay"; }; +&pwm3 { + status = "okay"; +}; + ®_pu { regulator-always-on; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision.dts index 2694fe18a91b12..7cda1f21e4182c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision.dts @@ -227,7 +227,6 @@ &usdhc4 { }; &usbotg1 { - pinctrl-names = "default"; disable-over-current; srp-disable; hnp-disable; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision5.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision5.dts index a2534c422a5229..f8709a9524093e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision5.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-vision5.dts @@ -26,6 +26,11 @@ / { compatible = "kobo,tolino-vision5", "fsl,imx6sl"; }; +&epd_pmic_supply { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_epd_pmic_supply>; +}; + &gpio_keys { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; @@ -59,6 +64,12 @@ MX6SL_PAD_FEC_RXD1__GPIO4_IO18 0x10059 /* TP_RST */ >; }; + pinctrl_epd_pmic_supply: epd-pmic-supplygrp { + fsl,pins = < + MX6SL_PAD_EPDC_PWRWAKEUP__GPIO2_IO14 0x40010059 + >; + }; + pinctrl_gpio_keys: gpio-keysgrp { fsl,pins = < MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25 0x17059 /* PWR_SW */ @@ -159,6 +170,14 @@ MX6SL_PAD_KEY_COL2__GPIO3_IO28 0x1b8b1 /* ricoh619 bat_low_int */ >; }; + pinctrl_sy7636_gpio: sy7636-gpiogrp { + fsl,pins = < + MX6SL_PAD_EPDC_VCOM0__GPIO2_IO03 0x40010059 /* VCOM_CTRL */ + MX6SL_PAD_EPDC_PWRCTRL1__GPIO2_IO08 0x40010059 /* EN */ + MX6SL_PAD_EPDC_PWRSTAT__GPIO2_IO13 0x17059 /* PWR_GOOD */ + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1 @@ -329,6 +348,11 @@ &ricoh619 { pinctrl-0 = <&pinctrl_ricoh_gpio>; }; +&sy7636 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sy7636_gpio>; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-librah2o.dts b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-librah2o.dts index 660620d226f717..19bbe60331b36e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-librah2o.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6sll-kobo-librah2o.dts @@ -36,6 +36,11 @@ &cpu0 { soc-supply = <&dcdc1_reg>; }; +&epd_pmic_supply { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_epd_pmic_supply>; +}; + &gpio_keys { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; @@ -69,6 +74,12 @@ MX6SLL_PAD_GPIO4_IO18__GPIO4_IO18 0x10059 /* TP_RST */ >; }; + pinctrl_epd_pmic_supply: epd-pmic-supplygrp { + fsl,pins = < + MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14 0x40010059 + >; + }; + pinctrl_gpio_keys: gpio-keysgrp { fsl,pins = < MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25 0x17059 /* PWR_SW */ @@ -169,6 +180,14 @@ MX6SLL_PAD_KEY_COL2__GPIO3_IO28 0x1b8b1 /* ricoh619 bat_low_int */ >; }; + pinctrl_sy7636_gpio: sy7636-gpiogrp { + fsl,pins = < + MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03 0x40010059 /* VCOM_CTRL */ + MX6SLL_PAD_EPDC_PWR_CTRL1__GPIO2_IO08 0x40010059 /* EN */ + MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13 0x17059 /* PWR_GOOD */ + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1 @@ -319,6 +338,11 @@ &ricoh619 { pinctrl-0 = <&pinctrl_ricoh_gpio>; }; +&sy7636 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sy7636_gpio>; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi index c7aeb99d8f0020..3e238d8118faed 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi @@ -119,7 +119,7 @@ reg_enet_3v3: regulator-enet-3v3 { regulator-always-on; }; - reg_pcie_gpio: regulator-pcie-gpio { + reg_pcie_gpio: regulator-pcie { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie_reg>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi index 73c9cfbdba621c..3d147b160ecf15 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi @@ -43,6 +43,13 @@ reg_2v8: regulator-2v8 { regulator-max-microvolt = <2800000>; }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_sd1_vmmc: regulator-sd1-vmmc { compatible = "regulator-fixed"; regulator-name = "VSD_3V3"; @@ -157,6 +164,7 @@ gpio_spi: gpio@0 { panel { compatible = "innolux,at043tn24"; backlight = <&backlight_display>; + power-supply = <®_3v3>; port { panel_in: endpoint { diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi index 4c09bb31269662..e34c8cbe36aec6 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-isiot.dtsi @@ -122,15 +122,21 @@ sgtl5000: codec@a { VDDD-supply = <®_1p8v>; }; - stmpe811: gpio-expander@44 { + gpio-expander@44 { compatible = "st,stmpe811"; reg = <0x44>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_stmpe>; interrupt-parent = <&gpio1>; interrupts = <18 IRQ_TYPE_EDGE_FALLING>; - interrupt-controller; - #interrupt-cells = <2>; + + gpio { + compatible = "st,stmpe-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; stmpe: touchscreen { compatible = "st,stmpe-ts"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dts index fb206c1d8aca1e..fbab126f95b95c 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pico-dwarf.dts @@ -49,5 +49,7 @@ sgtl5000: audio-codec@a { pressure-sensor@60 { compatible = "fsl,mpl3115"; reg = <0x60>; + vdd-supply = <®_3p3v>; + vddio-supply = <®_3p3v>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts index b29713831a7448..04e570d76e42cd 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-dhcom-pdk2.dts @@ -199,7 +199,7 @@ touchscreen@38 { reg = <0x38>; interrupt-parent = <&gpio5>; interrupts = <4 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */ - power-supply = <®_panel_3v3>; + vcc-supply = <®_panel_3v3>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi index 7ee25b14162760..6fd68970c0b456 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi @@ -126,7 +126,7 @@ tpm_tis: tpm@1 { s25fl064: flash@2 { #address-cells = <1>; #size-cells = <1>; - compatible = " jedec,spi-nor"; + compatible = "jedec,spi-nor"; reg = <2>; spi-max-frequency = <40000000>; m25p,fast-read; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts b/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts index 7acd28658e6ffa..2192f105ec81cb 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts @@ -35,6 +35,7 @@ backlight_lcd: backlight-j20 { panel-lcd { compatible = "okaya,rs800480t-7x0gp"; backlight = <&backlight_lcd>; + power-supply = <®_3v3>; port { panel_in: endpoint { @@ -61,6 +62,13 @@ reg_usb_otg2_vbus: regulator-usb-otg2-vbus { enable-active-high; }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "reg-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_can2_3v3: regulator-can2-3v3 { compatible = "regulator-fixed"; regulator-name = "can2-3v3"; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts index 1b965652291bfa..347dd0fe4f82e0 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts @@ -49,6 +49,8 @@ sgtl5000: audio-codec@a { pressure-sensor@60 { compatible = "fsl,mpl3115"; reg = <0x60>; + vdd-supply = <®_3p3v>; + vddio-supply = <®_3p3v>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts b/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts index 17236f90ab3355..a370e868cafec0 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-sdb.dts @@ -406,6 +406,8 @@ &i2c2 { mpl3115@60 { compatible = "fsl,mpl3115"; reg = <0x60>; + vdd-supply = <®_audio_3v3>; + vddio-supply = <®_audio_3v3>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts index 56dedd4fb8f089..92b6258059ee01 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts @@ -31,6 +31,13 @@ key-back { }; }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_peri_3p15v: regulator-peri-3p15v { compatible = "regulator-fixed"; regulator-name = "peri_3p15v_reg"; @@ -228,6 +235,8 @@ codec: sgtl5000@a { mpl3115@60 { compatible = "fsl,mpl3115"; reg = <0x60>; + vdd-supply = <®_3v3>; + vddio-supply = <®_3v3>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7ulp-evk.dts b/arch/arm/boot/dts/nxp/imx/imx7ulp-evk.dts index eff51e113db4f9..88d7dc005fa0ea 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7ulp-evk.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7ulp-evk.dts @@ -92,7 +92,6 @@ pinctrl_lpuart4: lpuart4grp { IMX7ULP_PAD_PTC3__LPUART4_RX 0x3 IMX7ULP_PAD_PTC2__LPUART4_TX 0x3 >; - bias-pull-up; }; pinctrl_pwm0: pwm0grp { diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts b/arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts index af59211842fb24..ddb64f3d0471ae 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-amarula-rmm.dts @@ -112,6 +112,29 @@ reg_usb1_vbus: regulator-usb1-vbus { enable-active-high; regulator-always-on; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "imx28-mrmmi-tlv320aic3x-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&cpu_dai>; + simple-audio-card,frame-master = <&cpu_dai>; + simple-audio-card,widgets = + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HPROUT", + "Headphone Jack", "HPRCOM"; + simple-audio-card,mclk-fs = <512>; + + cpu_dai: simple-audio-card,cpu { + sound-dai = <&saif0>; + clocks = <&saif0>; + }; + + codec_dai: simple-audio-card,codec { + sound-dai = <&tlv320aic3x>; + }; + }; }; &auart0 { @@ -154,6 +177,19 @@ &i2c0 { pinctrl-0 = <&i2c0_pins_a>; status = "okay"; + tlv320aic3x: audio-codec@18 { + compatible = "ti,tlv320aic3x"; + pinctrl-names = "default"; + pinctrl-0 = <&tlv320aic3x_pins>; + reg = <0x18>; + reset-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + DVDD-supply = <®_1v8>; + IOVDD-supply = <®_3v3>; + AVDD-supply = <®_3v3>; + DRVDD-supply = <®_3v3>; + }; + touchscreen: touchscreen@38 { compatible = "edt,edt-ft5306"; reg = <0x38>; @@ -246,6 +282,14 @@ MX28_PAD_PWM1__GPIO_3_17 fsl,voltage = ; }; + tlv320aic3x_pins: tlv320aic3x-pins@0 { + reg = <0>; + fsl,pinmux-ids = ; + fsl,drive-strength = ; + fsl,pull-up = ; + fsl,voltage = ; + }; + usb0_vbus_enable_pin: usb0-vbus-enable@0 { reg = <0>; fsl,pinmux-ids = ; @@ -269,6 +313,12 @@ &pwm { status = "okay"; }; +&saif0 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + status = "okay"; +}; + /* microSD */ &ssp0 { compatible = "fsl,imx28-mmc"; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts index 08b50dc63923c7..80fe2916501a8d 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts @@ -13,13 +13,37 @@ / { chassis-type = "handset"; aliases { + display0 = &framebuffer0; mmc0 = &sdhc_1; /* SDC1 eMMC slot */ mmc1 = &sdhc_2; /* SDC2 SD card slot */ serial0 = &blsp1_uart3; }; chosen { - stdout-path = "serial0:115200n8"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + stdout-path = "display0"; + + framebuffer0: framebuffer@3200000 { + compatible = "simple-framebuffer"; + reg = <0x03200000 0x800000>; + memory-region = <&cont_splash_region>; + + width = <720>; + height = <1280>; + stride = <(720 * 3)>; + format = "r8g8b8"; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + power-domains = <&mmcc MDSS_GDSC>; + }; }; gpio-hall-sensor { @@ -93,6 +117,11 @@ reg_vdd_tsp_a: regulator-vdd-tsp-a { }; reserved-memory { + cont_splash_region: cont-splash@3200000 { + reg = <0x03200000 0x800000>; + no-map; + }; + smem_region: smem@fa00000 { reg = <0x0fa00000 0x100000>; no-map; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts index 36f4c997b0b3aa..1df078d7d89b83 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts @@ -19,7 +19,7 @@ chosen { ext_l2: gpio-regulator { compatible = "regulator-fixed"; regulator-name = "ext_l2"; - gpio = <&msmgpio 91 0>; + gpio = <&tlmm 91 0>; startup-delay-us = <10000>; enable-active-high; }; @@ -38,12 +38,12 @@ &gsbi1_spi { ethernet@0 { compatible = "micrel,ks8851"; reg = <0>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <90 IRQ_TYPE_LEVEL_LOW>; spi-max-frequency = <5400000>; vdd-supply = <&ext_l2>; vdd-io-supply = <&pm8921_lvs6>; - reset-gpios = <&msmgpio 89 0>; + reset-gpios = <&tlmm 89 0>; }; }; @@ -56,7 +56,7 @@ &gsbi5_serial { status = "okay"; }; -&msmgpio { +&tlmm { spi1_default: spi1-default-state { mosi-pins { pins = "gpio6"; @@ -90,7 +90,7 @@ clk-pins { }; &pm8921 { - interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; }; &pm8921_keypad { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi deleted file mode 100644 index f18753e9f5ef3b..00000000000000 --- a/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi +++ /dev/null @@ -1,61 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only - -&msmgpio { - i2c3_default_state: i2c3-default-state { - i2c3-pins { - pins = "gpio16", "gpio17"; - function = "gsbi3"; - drive-strength = <8>; - bias-disable; - }; - }; - - i2c3_sleep_state: i2c3-sleep-state { - i2c3-pins { - pins = "gpio16", "gpio17"; - function = "gpio"; - drive-strength = <2>; - bias-bus-hold; - }; - }; - - sdcc3_default_state: sdcc3-default-state { - clk-pins { - pins = "sdc3_clk"; - drive-strength = <8>; - bias-disable; - }; - - cmd-pins { - pins = "sdc3_cmd"; - drive-strength = <8>; - bias-pull-up; - }; - - data-pins { - pins = "sdc3_data"; - drive-strength = <8>; - bias-pull-up; - }; - }; - - sdcc3_sleep_state: sdcc3-sleep-state { - clk-pins { - pins = "sdc3_clk"; - drive-strength = <2>; - bias-disable; - }; - - cmd-pins { - pins = "sdc3_cmd"; - drive-strength = <2>; - bias-pull-up; - }; - - data-pins { - pins = "sdc3_data"; - drive-strength = <2>; - bias-pull-up; - }; - }; -}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts index 49d117ea033a0e..5ee919dce75b31 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts @@ -31,7 +31,7 @@ gpio-keys { key-home { label = "Home"; - gpios = <&msmgpio 40 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 40 GPIO_ACTIVE_LOW>; debounce-interval = <5>; linux,code = ; wakeup-event-action = ; @@ -40,14 +40,14 @@ key-home { key-volume-up { label = "Volume Up"; - gpios = <&msmgpio 50 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; debounce-interval = <5>; linux,code = ; }; key-volume-down { label = "Volume Down"; - gpios = <&msmgpio 81 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 81 GPIO_ACTIVE_LOW>; debounce-interval = <5>; linux,code = ; }; @@ -102,7 +102,7 @@ &gsbi3_i2c { touchscreen@4a { compatible = "atmel,maxtouch"; reg = <0x4a>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <11 IRQ_TYPE_EDGE_FALLING>; vdda-supply = <&pm8921_lvs6>; vdd-supply = <&pm8921_l17>; @@ -111,7 +111,7 @@ touchscreen@4a { }; }; -&msmgpio { +&tlmm { spi1_default: spi1-default-state { mosi-pins { pins = "gpio6"; @@ -160,7 +160,7 @@ touchscreen: touchscreen-int-state { }; &pm8921 { - interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; }; &rpm { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-sony-huashan.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-sony-huashan.dts index f2f59fc8b9b61e..591dc837e60036 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8960-sony-huashan.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8960-sony-huashan.dts @@ -54,7 +54,7 @@ &gsbi8_serial { }; &pm8921 { - interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; }; &pm8921_gpio { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi index 6e272d5345a85f..38bd4fd8dda5cc 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi @@ -15,6 +15,35 @@ / { compatible = "qcom,msm8960"; interrupt-parent = <&intc>; + clocks { + cxo_board: cxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "cxo_board"; + }; + + pxo_board: pxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + clock-output-names = "pxo_board"; + }; + + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "sleep_clk"; + }; + }; + + cpu-pmu { + compatible = "qcom,krait-pmu"; + interrupts = ; + qcom,no-pc-write; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -22,9 +51,9 @@ cpus { cpu@0 { compatible = "qcom,krait"; + reg = <0>; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; - reg = <0>; next-level-cache = <&l2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; @@ -32,9 +61,9 @@ cpu@0 { cpu@1 { compatible = "qcom,krait"; + reg = <1>; enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; - reg = <1>; next-level-cache = <&l2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; @@ -52,111 +81,29 @@ memory@80000000 { reg = <0x80000000 0>; }; - thermal-zones { - cpu0-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&tsens 0>; - - trips { - cpu_alert0: trip0 { - temperature = <60000>; - hysteresis = <10000>; - type = "passive"; - }; - - cpu_crit0: trip1 { - temperature = <95000>; - hysteresis = <10000>; - type = "critical"; - }; - }; - }; - - cpu1-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&tsens 1>; - - trips { - cpu_alert1: trip0 { - temperature = <60000>; - hysteresis = <10000>; - type = "passive"; - }; - - cpu_crit1: trip1 { - temperature = <95000>; - hysteresis = <10000>; - type = "critical"; - }; - }; - }; - }; - - cpu-pmu { - compatible = "qcom,krait-pmu"; - interrupts = ; - qcom,no-pc-write; - }; - - clocks { - cxo_board: cxo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <19200000>; - clock-output-names = "cxo_board"; - }; - - pxo_board: pxo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <27000000>; - clock-output-names = "pxo_board"; - }; - - sleep_clk: sleep_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "sleep_clk"; - }; - }; - - /* Temporary fixed regulator */ - vsdcc_fixed: vsdcc-regulator { - compatible = "regulator-fixed"; - regulator-name = "SDCC Power"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - regulator-always-on; - }; - soc: soc { + compatible = "simple-bus"; + ranges; #address-cells = <1>; #size-cells = <1>; - ranges; - compatible = "simple-bus"; - intc: interrupt-controller@2000000 { - compatible = "qcom,msm-qgic2"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x02000000 0x1000>, - <0x02002000 0x1000>; + rpm: rpm@108000 { + compatible = "qcom,rpm-msm8960"; + reg = <0x108000 0x1000>; + qcom,ipc = <&l2cc 0x8 2>; + + interrupts = , + , + ; + interrupt-names = "ack", + "err", + "wakeup"; }; - timer@200a000 { - compatible = "qcom,kpss-wdt-msm8960", "qcom,kpss-timer", - "qcom,msm-timer"; - interrupts = , - , - ; - reg = <0x0200a000 0x100>; - clock-frequency = <27000000>; - clocks = <&sleep_clk>; - clock-names = "sleep"; - cpu-offset = <0x80000>; + ssbi: ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; }; qfprom: efuse@700000 { @@ -174,26 +121,158 @@ tsens_backup: backup-calib@414 { }; }; - msmgpio: pinctrl@800000 { + tlmm: pinctrl@800000 { compatible = "qcom,msm8960-pinctrl"; + reg = <0x800000 0x4000>; gpio-controller; - gpio-ranges = <&msmgpio 0 0 152>; + gpio-ranges = <&tlmm 0 0 152>; #gpio-cells = <2>; interrupts = ; interrupt-controller; #interrupt-cells = <2>; - reg = <0x800000 0x4000>; + + i2c1_default_state: i2c1-default-state { + i2c1-pins { + pins = "gpio8", "gpio9"; + function = "gsbi1"; + drive-strength = <8>; + bias-disable; + }; + }; + + i2c1_sleep_state: i2c1-sleep-state { + i2c1-pins { + pins = "gpio8", "gpio9"; + function = "gpio"; + drive-strength = <2>; + bias-bus-hold; + }; + }; + + i2c3_default_state: i2c3-default-state { + i2c3-pins { + pins = "gpio16", "gpio17"; + function = "gsbi3"; + drive-strength = <8>; + bias-disable; + }; + }; + + i2c3_sleep_state: i2c3-sleep-state { + i2c3-pins { + pins = "gpio16", "gpio17"; + function = "gpio"; + drive-strength = <2>; + bias-bus-hold; + }; + }; + + i2c8_default_state: i2c8-default-state { + i2c8-pins { + pins = "gpio36", "gpio37"; + function = "gsbi8"; + drive-strength = <8>; + bias-disable; + }; + }; + + i2c8_sleep_state: i2c8-sleep-state { + i2c8-pins { + pins = "gpio36", "gpio37"; + function = "gpio"; + drive-strength = <2>; + bias-bus-hold; + }; + }; + + i2c10_default_state: i2c10-default-state { + i2c10-pins { + pins = "gpio73", "gpio74"; + function = "gsbi10"; + drive-strength = <8>; + bias-disable; + }; + }; + + i2c10_sleep_state: i2c10-sleep-state { + i2c10-pins { + pins = "gpio73", "gpio74"; + function = "gpio"; + drive-strength = <2>; + bias-bus-hold; + }; + }; + + i2c12_default_state: i2c12-default-state { + i2c12-pins { + pins = "gpio44", "gpio45"; + function = "gsbi12"; + drive-strength = <8>; + bias-disable; + }; + }; + + i2c12_sleep_state: i2c12-sleep-state { + i2c12-pins { + pins = "gpio44", "gpio45"; + function = "gpio"; + drive-strength = <2>; + bias-bus-hold; + }; + }; + + sdcc3_default_state: sdcc3-default-state { + clk-pins { + pins = "sdc3_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "sdc3_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "sdc3_data"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + sdcc3_sleep_state: sdcc3-sleep-state { + clk-pins { + pins = "sdc3_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc3_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc3_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; }; gcc: clock-controller@900000 { compatible = "qcom,gcc-msm8960", "syscon"; + reg = <0x900000 0x4000>; #clock-cells = <1>; #reset-cells = <1>; - reg = <0x900000 0x4000>; clocks = <&cxo_board>, <&pxo_board>, <&lcc PLL4>; - clock-names = "cxo", "pxo", "pll4"; + clock-names = "cxo", + "pxo", + "pll4"; tsens: thermal-sensor { compatible = "qcom,msm8960-tsens"; @@ -208,49 +287,25 @@ tsens: thermal-sensor { }; }; - lcc: clock-controller@28000000 { - compatible = "qcom,lcc-msm8960"; - reg = <0x28000000 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - clocks = <&pxo_board>, - <&gcc PLL4_VOTE>, - <0>, - <0>, <0>, - <0>, <0>, - <0>; - clock-names = "pxo", - "pll4_vote", - "mi2s_codec_clk", - "codec_i2s_mic_codec_clk", - "spare_i2s_mic_codec_clk", - "codec_i2s_spkr_codec_clk", - "spare_i2s_spkr_codec_clk", - "pcm_codec_clk"; + intc: interrupt-controller@2000000 { + compatible = "qcom,msm-qgic2"; + reg = <0x02000000 0x1000>, + <0x02002000 0x1000>; + interrupt-controller; + #interrupt-cells = <3>; }; - clock-controller@4000000 { - compatible = "qcom,mmcc-msm8960"; - reg = <0x4000000 0x1000>; - #clock-cells = <1>; - #power-domain-cells = <1>; - #reset-cells = <1>; - clocks = <&pxo_board>, - <&gcc PLL3>, - <&gcc PLL8_VOTE>, - <0>, - <0>, - <0>, - <0>, - <0>; - clock-names = "pxo", - "pll3", - "pll8_vote", - "dsi1pll", - "dsi1pllbyte", - "dsi2pll", - "dsi2pllbyte", - "hdmipll"; + timer@200a000 { + compatible = "qcom,kpss-wdt-msm8960", "qcom,kpss-timer", + "qcom,msm-timer"; + reg = <0x0200a000 0x100>; + interrupts = , + , + ; + clock-frequency = <27000000>; + clocks = <&sleep_clk>; + clock-names = "sleep"; + cpu-offset = <0x80000>; }; l2cc: clock-controller@2011000 { @@ -261,17 +316,6 @@ l2cc: clock-controller@2011000 { #clock-cells = <0>; }; - rpm: rpm@108000 { - compatible = "qcom,rpm-msm8960"; - reg = <0x108000 0x1000>; - qcom,ipc = <&l2cc 0x8 2>; - - interrupts = , - , - ; - interrupt-names = "ack", "err", "wakeup"; - }; - acc0: clock-controller@2088000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02088000 0x1000>, <0x02008000 0x1000>; @@ -281,15 +325,6 @@ acc0: clock-controller@2088000 { #clock-cells = <0>; }; - acc1: clock-controller@2098000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x02098000 0x1000>, <0x02008000 0x1000>; - clocks = <&gcc PLL8_VOTE>, <&pxo_board>; - clock-names = "pll8_vote", "pxo"; - clock-output-names = "acpu1_aux"; - #clock-cells = <0>; - }; - saw0: power-manager@2089000 { compatible = "qcom,msm8960-saw2-cpu", "qcom,saw2"; reg = <0x02089000 0x1000>, <0x02009000 0x1000>; @@ -300,6 +335,15 @@ saw0_vreg: regulator { }; }; + acc1: clock-controller@2098000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + clocks = <&gcc PLL8_VOTE>, <&pxo_board>; + clock-names = "pll8_vote", "pxo"; + clock-output-names = "acpu1_aux"; + #clock-cells = <0>; + }; + saw1: power-manager@2099000 { compatible = "qcom,msm8960-saw2-cpu", "qcom,saw2"; reg = <0x02099000 0x1000>, <0x02009000 0x1000>; @@ -310,77 +354,34 @@ saw1_vreg: regulator { }; }; - gsbi5: gsbi@16400000 { - compatible = "qcom,gsbi-v1.0.0"; - cell-index = <5>; - reg = <0x16400000 0x100>; - clocks = <&gcc GSBI5_H_CLK>; - clock-names = "iface"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - syscon-tcsr = <&tcsr>; - - status = "disabled"; - - gsbi5_serial: serial@16440000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x16440000 0x1000>, - <0x16400000 0x1000>; - interrupts = ; - clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; - clock-names = "core", "iface"; - status = "disabled"; - }; - }; - - gsbi8: gsbi@1a000000 { - compatible = "qcom,gsbi-v1.0.0"; - cell-index = <8>; - reg = <0x1a000000 0x100>; - clocks = <&gcc GSBI8_H_CLK>; - clock-names = "iface"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - syscon-tcsr = <&tcsr>; - - status = "disabled"; - - gsbi8_serial: serial@1a040000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x1a040000 0x1000>, - <0x1a000000 0x1000>; - interrupts = ; - clocks = <&gcc GSBI8_UART_CLK>, - <&gcc GSBI8_H_CLK>; - clock-names = "core", - "iface"; - - status = "disabled"; - }; - }; - - ssbi: ssbi@500000 { - compatible = "qcom,ssbi"; - reg = <0x500000 0x1000>; - qcom,controller-type = "pmic-arbiter"; - }; - - rng@1a500000 { - compatible = "qcom,prng"; - reg = <0x1a500000 0x200>; - clocks = <&gcc PRNG_CLK>; - clock-names = "core"; + clock-controller@4000000 { + compatible = "qcom,mmcc-msm8960"; + reg = <0x4000000 0x1000>; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + clocks = <&pxo_board>, + <&gcc PLL3>, + <&gcc PLL8_VOTE>, + <0>, + <0>, + <0>, + <0>, + <0>; + clock-names = "pxo", + "pll3", + "pll8_vote", + "dsi1pll", + "dsi1pllbyte", + "dsi2pll", + "dsi2pllbyte", + "hdmipll"; }; sdcc3: mmc@12180000 { compatible = "arm,pl18x", "arm,primecell"; - arm,primecell-periphid = <0x00051180>; - status = "disabled"; reg = <0x12180000 0x2000>; + arm,primecell-periphid = <0x00051180>; interrupts = ; clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; clock-names = "mclk", "apb_pclk"; @@ -392,6 +393,8 @@ sdcc3: mmc@12180000 { vmmc-supply = <&vsdcc_fixed>; dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; dma-names = "tx", "rx"; + + status = "disabled"; }; sdcc3bam: dma-controller@12182000 { @@ -405,10 +408,9 @@ sdcc3bam: dma-controller@12182000 { }; sdcc1: mmc@12400000 { - status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; - arm,primecell-periphid = <0x00051180>; reg = <0x12400000 0x2000>; + arm,primecell-periphid = <0x00051180>; interrupts = ; clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; clock-names = "mclk", "apb_pclk"; @@ -420,6 +422,8 @@ sdcc1: mmc@12400000 { vmmc-supply = <&vsdcc_fixed>; dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; dma-names = "tx", "rx"; + + status = "disabled"; }; sdcc1bam: dma-controller@12402000 { @@ -432,33 +436,32 @@ sdcc1bam: dma-controller@12402000 { qcom,ee = <0>; }; - tcsr: syscon@1a400000 { - compatible = "qcom,tcsr-msm8960", "syscon"; - reg = <0x1a400000 0x100>; - }; - - gsbi1: gsbi@16000000 { + gsbi12: gsbi@12480000 { compatible = "qcom,gsbi-v1.0.0"; - cell-index = <1>; - reg = <0x16000000 0x100>; - clocks = <&gcc GSBI1_H_CLK>; + reg = <0x12480000 0x100>; + ranges; + cell-index = <12>; + clocks = <&gcc GSBI12_H_CLK>; clock-names = "iface"; #address-cells = <1>; #size-cells = <1>; - ranges; status = "disabled"; - gsbi1_spi: spi@16080000 { - compatible = "qcom,spi-qup-v1.1.1"; + gsbi12_i2c: i2c@124a0000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x124a0000 0x1000>; + pinctrl-0 = <&i2c12_default_state>; + pinctrl-1 = <&i2c12_sleep_state>; + pinctrl-names = "default", "sleep"; + interrupts = ; + clocks = <&gcc GSBI12_QUP_CLK>, + <&gcc GSBI12_H_CLK>; + clock-names = "core", + "iface"; #address-cells = <1>; #size-cells = <0>; - reg = <0x16080000 0x1000>; - interrupts = ; - cs-gpios = <&msmgpio 8 0>; - clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; - clock-names = "core", "iface"; status = "disabled"; }; }; @@ -479,6 +482,7 @@ usb1: usb@12500000 { phys = <&usb_hs1_phy>; phy-names = "usb-phy"; #reset-cells = <1>; + status = "disabled"; ulpi { @@ -494,6 +498,51 @@ usb_hs1_phy: phy { }; }; + gsbi1: gsbi@16000000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x16000000 0x100>; + ranges; + cell-index = <1>; + clocks = <&gcc GSBI1_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + + status = "disabled"; + + gsbi1_i2c: i2c@16080000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16080000 0x1000>; + pinctrl-0 = <&i2c1_default_state>; + pinctrl-1 = <&i2c1_sleep_state>; + pinctrl-names = "default", "sleep"; + interrupts = ; + clocks = <&gcc GSBI1_QUP_CLK>, + <&gcc GSBI1_H_CLK>; + clock-names = "core", + "iface"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + gsbi1_spi: spi@16080000 { + compatible = "qcom,spi-qup-v1.1.1"; + reg = <0x16080000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + cs-gpios = <&tlmm 8 0>; + clocks = <&gcc GSBI1_QUP_CLK>, + <&gcc GSBI1_H_CLK>; + clock-names = "core", + "iface"; + + status = "disabled"; + }; + }; + gsbi3: gsbi@16200000 { compatible = "qcom,gsbi-v1.0.0"; reg = <0x16200000 0x100>; @@ -503,6 +552,7 @@ gsbi3: gsbi@16200000 { clock-names = "iface"; #address-cells = <1>; #size-cells = <1>; + status = "disabled"; gsbi3_i2c: i2c@16280000 { @@ -514,12 +564,200 @@ gsbi3_i2c: i2c@16280000 { interrupts = ; clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>; - clock-names = "core", "iface"; + clock-names = "core", + "iface"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + gsbi5: gsbi@16400000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x16400000 0x100>; + ranges; + cell-index = <5>; + clocks = <&gcc GSBI5_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + syscon-tcsr = <&tcsr>; + + status = "disabled"; + + gsbi5_serial: serial@16440000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16440000 0x1000>, + <0x16400000 0x1000>; + interrupts = ; + clocks = <&gcc GSBI5_UART_CLK>, + <&gcc GSBI5_H_CLK>; + clock-names = "core", + "iface"; + + status = "disabled"; + }; + }; + + gsbi8: gsbi@1a000000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x1a000000 0x100>; + ranges; + cell-index = <8>; + clocks = <&gcc GSBI8_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + syscon-tcsr = <&tcsr>; + + status = "disabled"; + + gsbi8_serial: serial@1a040000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x1a040000 0x1000>, + <0x1a000000 0x1000>; + interrupts = ; + clocks = <&gcc GSBI8_UART_CLK>, + <&gcc GSBI8_H_CLK>; + clock-names = "core", + "iface"; + + status = "disabled"; + }; + + gsbi8_i2c: i2c@1a080000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x1a080000 0x1000>; + pinctrl-0 = <&i2c8_default_state>; + pinctrl-1 = <&i2c8_sleep_state>; + pinctrl-names = "default", "sleep"; + interrupts = ; + clocks = <&gcc GSBI8_QUP_CLK>, + <&gcc GSBI8_H_CLK>; + clock-names = "core", + "iface"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + gsbi10: gsbi@1a200000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x1a200000 0x100>; + ranges; + cell-index = <10>; + clocks = <&gcc GSBI10_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + + status = "disabled"; + + gsbi10_i2c: i2c@1a280000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x1a280000 0x1000>; + pinctrl-0 = <&i2c10_default_state>; + pinctrl-1 = <&i2c10_sleep_state>; + pinctrl-names = "default", "sleep"; + interrupts = ; + clocks = <&gcc GSBI10_QUP_CLK>, + <&gcc GSBI10_H_CLK>; + clock-names = "core", + "iface"; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; }; }; + + tcsr: syscon@1a400000 { + compatible = "qcom,tcsr-msm8960", "syscon"; + reg = <0x1a400000 0x100>; + }; + + rng@1a500000 { + compatible = "qcom,prng"; + reg = <0x1a500000 0x200>; + clocks = <&gcc PRNG_CLK>; + clock-names = "core"; + }; + + lcc: clock-controller@28000000 { + compatible = "qcom,lcc-msm8960"; + reg = <0x28000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + clocks = <&pxo_board>, + <&gcc PLL4_VOTE>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; + clock-names = "pxo", + "pll4_vote", + "mi2s_codec_clk", + "codec_i2s_mic_codec_clk", + "spare_i2s_mic_codec_clk", + "codec_i2s_spkr_codec_clk", + "spare_i2s_spkr_codec_clk", + "pcm_codec_clk"; + }; + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 0>; + + trips { + cpu_alert0: trip0 { + temperature = <60000>; + hysteresis = <10000>; + type = "passive"; + }; + + cpu_crit0: trip1 { + temperature = <95000>; + hysteresis = <10000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens 1>; + + trips { + cpu_alert1: trip0 { + temperature = <60000>; + hysteresis = <10000>; + type = "passive"; + }; + + cpu_crit1: trip1 { + temperature = <95000>; + hysteresis = <10000>; + type = "critical"; + }; + }; + }; + }; + + /* Temporary fixed regulator */ + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; }; }; -#include "qcom-msm8960-pins.dtsi" diff --git a/arch/arm/boot/dts/renesas/r7s72100.dtsi b/arch/arm/boot/dts/renesas/r7s72100.dtsi index a1e4e9ac8f621a..245c26bb8e037c 100644 --- a/arch/arm/boot/dts/renesas/r7s72100.dtsi +++ b/arch/arm/boot/dts/renesas/r7s72100.dtsi @@ -14,6 +14,7 @@ / { compatible = "renesas,r7s72100"; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&gic>; aliases { i2c0 = &i2c0; @@ -84,7 +85,7 @@ p1_clk: p1 { pmu { compatible = "arm,cortex-a9-pmu"; - interrupts-extended = <&gic GIC_PPI 0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = ; }; rtc_x1_clk: rtc_x1 { @@ -103,7 +104,6 @@ rtc_x3_clk: rtc_x3 { soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/renesas/r7s9210.dtsi b/arch/arm/boot/dts/renesas/r7s9210.dtsi index fdeb0bc12cb794..2b349b51003b58 100644 --- a/arch/arm/boot/dts/renesas/r7s9210.dtsi +++ b/arch/arm/boot/dts/renesas/r7s9210.dtsi @@ -52,7 +52,6 @@ cpu@0 { soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/renesas/r8a7742.dtsi b/arch/arm/boot/dts/renesas/r8a7742.dtsi index 9083d288cc339d..4220b2349b4091 100644 --- a/arch/arm/boot/dts/renesas/r8a7742.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7742.dtsi @@ -14,6 +14,7 @@ / { compatible = "renesas,r8a7742"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; /* * The external audio clocks are configured as 0 Hz fixed frequency @@ -208,19 +209,19 @@ pcie_bus_clk: pcie_bus { pmu-0 { compatible = "arm,cortex-a15-pmu"; - interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + interrupts = , + , + , + ; interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; }; pmu-1 { compatible = "arm,cortex-a7-pmu"; - interrupts-extended = <&gic GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + interrupts = , + , + , + ; interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; }; @@ -234,7 +235,6 @@ scif_clk: scif { soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; @@ -1932,10 +1932,10 @@ cooling-maps { timer { compatible = "arm,armv7-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = , + , + , + ; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; diff --git a/arch/arm/boot/dts/renesas/r8a7743.dtsi b/arch/arm/boot/dts/renesas/r8a7743.dtsi index 58a06cf37784c3..c697942387e1d5 100644 --- a/arch/arm/boot/dts/renesas/r8a7743.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7743.dtsi @@ -14,6 +14,7 @@ / { compatible = "renesas,r8a7743"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; /* * The external audio clocks are configured as 0 Hz fixed frequency @@ -115,8 +116,8 @@ pcie_bus_clk: pcie_bus { pmu { compatible = "arm,cortex-a15-pmu"; - interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts = , + ; interrupt-affinity = <&cpu0>, <&cpu1>; }; @@ -130,7 +131,6 @@ scif_clk: scif { soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; @@ -1841,10 +1841,10 @@ cooling-maps { timer { compatible = "arm,armv7-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = , + , + , + ; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; diff --git a/arch/arm/boot/dts/renesas/r8a7744.dtsi b/arch/arm/boot/dts/renesas/r8a7744.dtsi index 034244648d18cb..fed46345807cb0 100644 --- a/arch/arm/boot/dts/renesas/r8a7744.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7744.dtsi @@ -14,6 +14,7 @@ / { compatible = "renesas,r8a7744"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; /* * The external audio clocks are configured as 0 Hz fixed frequency @@ -115,8 +116,8 @@ pcie_bus_clk: pcie_bus { pmu { compatible = "arm,cortex-a15-pmu"; - interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts = , + ; interrupt-affinity = <&cpu0>, <&cpu1>; }; @@ -130,7 +131,6 @@ scif_clk: scif { soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; @@ -1827,10 +1827,10 @@ cooling-maps { timer { compatible = "arm,armv7-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = , + , + , + ; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; diff --git a/arch/arm/boot/dts/renesas/r8a7745.dtsi b/arch/arm/boot/dts/renesas/r8a7745.dtsi index 704fa6f3cbd088..5424a73562ddba 100644 --- a/arch/arm/boot/dts/renesas/r8a7745.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7745.dtsi @@ -14,6 +14,7 @@ / { compatible = "renesas,r8a7745"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; aliases { i2c0 = &i2c0; @@ -105,8 +106,8 @@ extal_clk: extal { pmu { compatible = "arm,cortex-a7-pmu"; - interrupts-extended = <&gic GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupts = , + ; interrupt-affinity = <&cpu0>, <&cpu1>; }; @@ -120,7 +121,6 @@ scif_clk: scif { soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; @@ -1631,10 +1631,10 @@ cmt1: timer@e6130000 { timer { compatible = "arm,armv7-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = , + , + , + ; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; diff --git a/arch/arm/boot/dts/renesas/r8a77470.dtsi b/arch/arm/boot/dts/renesas/r8a77470.dtsi index a8a12275c98a66..c61790e7667f58 100644 --- a/arch/arm/boot/dts/renesas/r8a77470.dtsi +++ b/arch/arm/boot/dts/renesas/r8a77470.dtsi @@ -13,6 +13,7 @@ / { compatible = "renesas,r8a77470"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; aliases { i2c0 = &i2c0; @@ -66,8 +67,8 @@ extal_clk: extal { pmu { compatible = "arm,cortex-a7-pmu"; - interrupts-extended = <&gic GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupts = , + ; interrupt-affinity = <&cpu0>, <&cpu1>; }; @@ -81,7 +82,6 @@ scif_clk: scif { soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; @@ -1057,10 +1057,10 @@ cmt1: timer@e6130000 { timer { compatible = "arm,armv7-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = , + , + , + ; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; diff --git a/arch/arm/boot/dts/renesas/r8a7790.dtsi b/arch/arm/boot/dts/renesas/r8a7790.dtsi index 4f97c09dbc9fe9..12cce9bdc44991 100644 --- a/arch/arm/boot/dts/renesas/r8a7790.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7790.dtsi @@ -16,6 +16,7 @@ / { compatible = "renesas,r8a7790"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; aliases { i2c0 = &i2c0; @@ -239,19 +240,19 @@ pcie_bus_clk: pcie_bus { pmu-0 { compatible = "arm,cortex-a15-pmu"; - interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + interrupts = , + , + , + ; interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; }; pmu-1 { compatible = "arm,cortex-a7-pmu"; - interrupts-extended = <&gic GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + interrupts = , + , + , + ; interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; }; @@ -265,7 +266,6 @@ scif_clk: scif { soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; bootph-all; #address-cells = <2>; @@ -2012,10 +2012,10 @@ cooling-maps { timer { compatible = "arm,armv7-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = , + , + , + ; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; diff --git a/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts b/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts index e9f90fa44d551b..61ea438eb6af1c 100644 --- a/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts @@ -301,6 +301,16 @@ cec_clock: cec-clock { clock-frequency = <12000000>; }; + composite-in { + compatible = "composite-video-connector"; + + port { + composite_con_in: endpoint { + remote-endpoint = <&adv7180_in>; + }; + }; + }; + hdmi-out { compatible = "hdmi-connector"; type = "a"; @@ -383,13 +393,25 @@ ak4643: codec@12 { }; composite-in@20 { - compatible = "adi,adv7180"; + compatible = "adi,adv7180cp"; reg = <0x20>; - port { - adv7180: endpoint { - bus-width = <8>; - remote-endpoint = <&vin1ep>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7180_in: endpoint { + remote-endpoint = <&composite_con_in>; + }; + }; + + port@3 { + reg = <3>; + adv7180_out: endpoint { + remote-endpoint = <&vin1ep>; + }; }; }; }; @@ -900,7 +922,7 @@ &vin1 { port { vin1ep: endpoint { - remote-endpoint = <&adv7180>; + remote-endpoint = <&adv7180_out>; bus-width = <8>; }; }; diff --git a/arch/arm/boot/dts/renesas/r8a7791.dtsi b/arch/arm/boot/dts/renesas/r8a7791.dtsi index 5023b41c28b361..35313e8da42650 100644 --- a/arch/arm/boot/dts/renesas/r8a7791.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7791.dtsi @@ -16,6 +16,7 @@ / { compatible = "renesas,r8a7791"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; aliases { i2c0 = &i2c0; @@ -137,8 +138,8 @@ pcie_bus_clk: pcie_bus { pmu { compatible = "arm,cortex-a15-pmu"; - interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts = , + ; interrupt-affinity = <&cpu0>, <&cpu1>; }; @@ -152,7 +153,6 @@ scif_clk: scif { soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; bootph-all; #address-cells = <2>; @@ -1939,10 +1939,10 @@ cooling-maps { timer { compatible = "arm,armv7-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = , + , + , + ; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; diff --git a/arch/arm/boot/dts/renesas/r8a7792.dtsi b/arch/arm/boot/dts/renesas/r8a7792.dtsi index 7513afc1c95853..9e0de69ac3a3a9 100644 --- a/arch/arm/boot/dts/renesas/r8a7792.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7792.dtsi @@ -14,6 +14,7 @@ / { compatible = "renesas,r8a7792"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; aliases { i2c0 = &i2c0; @@ -94,8 +95,8 @@ lbsc: bus { pmu { compatible = "arm,cortex-a15-pmu"; - interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts = , + ; interrupt-affinity = <&cpu0>, <&cpu1>; }; @@ -109,7 +110,6 @@ scif_clk: scif { soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; bootph-all; #address-cells = <2>; @@ -992,10 +992,10 @@ cmt1: timer@e6130000 { timer { compatible = "arm,armv7-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = , + , + , + ; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; }; diff --git a/arch/arm/boot/dts/renesas/r8a7793-gose.dts b/arch/arm/boot/dts/renesas/r8a7793-gose.dts index 45b267ec267943..5c6928c941aca9 100644 --- a/arch/arm/boot/dts/renesas/r8a7793-gose.dts +++ b/arch/arm/boot/dts/renesas/r8a7793-gose.dts @@ -373,7 +373,6 @@ adv7180_in: endpoint { port@3 { reg = <3>; adv7180_out: endpoint { - bus-width = <8>; remote-endpoint = <&vin1ep>; }; }; diff --git a/arch/arm/boot/dts/renesas/r8a7793.dtsi b/arch/arm/boot/dts/renesas/r8a7793.dtsi index fc6d3bcca2961f..1ad50070a1a732 100644 --- a/arch/arm/boot/dts/renesas/r8a7793.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7793.dtsi @@ -14,6 +14,7 @@ / { compatible = "renesas,r8a7793"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; aliases { i2c0 = &i2c0; @@ -122,8 +123,8 @@ extal_clk: extal { pmu { compatible = "arm,cortex-a15-pmu"; - interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts = , + ; interrupt-affinity = <&cpu0>, <&cpu1>; }; @@ -137,7 +138,6 @@ scif_clk: scif { soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; bootph-all; #address-cells = <2>; @@ -1518,10 +1518,10 @@ cooling-maps { timer { compatible = "arm,armv7-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = , + , + , + ; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; diff --git a/arch/arm/boot/dts/renesas/r8a7794.dtsi b/arch/arm/boot/dts/renesas/r8a7794.dtsi index 92010d09f6c40a..7669a67377c989 100644 --- a/arch/arm/boot/dts/renesas/r8a7794.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7794.dtsi @@ -15,6 +15,7 @@ / { compatible = "renesas,r8a7794"; #address-cells = <2>; #size-cells = <2>; + interrupt-parent = <&gic>; aliases { i2c0 = &i2c0; @@ -104,8 +105,8 @@ extal_clk: extal { pmu { compatible = "arm,cortex-a7-pmu"; - interrupts-extended = <&gic GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, - <&gic GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupts = , + ; interrupt-affinity = <&cpu0>, <&cpu1>; }; @@ -119,7 +120,6 @@ scif_clk: scif { soc { compatible = "simple-bus"; - interrupt-parent = <&gic>; bootph-all; #address-cells = <2>; @@ -1485,10 +1485,10 @@ cmt1: timer@e6130000 { timer { compatible = "arm,armv7-timer"; - interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, - <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = , + , + , + ; interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; diff --git a/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts b/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts index 3258b2e274346d..4a72aa7663f252 100644 --- a/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts +++ b/arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dts @@ -308,8 +308,6 @@ &rtc0 { &switch { status = "okay"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pins_eth3>, <&pins_eth4>, <&pins_mdio1>; diff --git a/arch/arm/boot/dts/renesas/r9a06g032.dtsi b/arch/arm/boot/dts/renesas/r9a06g032.dtsi index 13a60656b04470..8debb77803bb9a 100644 --- a/arch/arm/boot/dts/renesas/r9a06g032.dtsi +++ b/arch/arm/boot/dts/renesas/r9a06g032.dtsi @@ -13,6 +13,7 @@ / { compatible = "renesas,r9a06g032"; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&gic>; cpus { #address-cells = <1>; @@ -63,7 +64,6 @@ soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - interrupt-parent = <&gic>; ranges; rtc0: rtc@40006000 { @@ -290,6 +290,16 @@ i2c2: i2c@40064000 { status = "disabled"; }; + adc: adc@40065000 { + compatible = "renesas,r9a06g032-adc", "renesas,rzn1-adc"; + reg = <0x40065000 0x200>; + clocks = <&sysctrl R9A06G032_HCLK_ADC>, <&sysctrl R9A06G032_CLK_ADC>; + clock-names = "pclk", "adc"; + power-domains = <&sysctrl>; + #io-channel-cells = <1>; + status = "disabled"; + }; + pinctrl: pinctrl@40067000 { compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl"; reg = <0x40067000 0x1000>, <0x51000000 0x480>; @@ -522,7 +532,6 @@ can1: can@52105000 { timer { compatible = "arm,armv7-timer"; - interrupt-parent = <&gic>; arm,cpu-registers-not-fw-configured; always-on; interrupts = diff --git a/arch/arm/boot/dts/renesas/sh73a0-kzm9g.dts b/arch/arm/boot/dts/renesas/sh73a0-kzm9g.dts index 1ce07d0878dc63..0a9cd61bcb5f99 100644 --- a/arch/arm/boot/dts/renesas/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/renesas/sh73a0-kzm9g.dts @@ -209,6 +209,7 @@ accelerometer@1d { reg = <0x1d>; interrupts-extended = <&irqpin3 2 IRQ_TYPE_LEVEL_HIGH>, <&irqpin3 3 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "INT1", "INT2"; }; rtc@32 { diff --git a/arch/arm/boot/dts/rockchip/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rockchip/rk3066a-bqcurie2.dts index c227691013eaf0..65f8bc804d2121 100644 --- a/arch/arm/boot/dts/rockchip/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rockchip/rk3066a-bqcurie2.dts @@ -80,26 +80,33 @@ &i2c1 { clock-frequency = <400000>; tps: tps@2d { + compatible = "ti,tps65910"; reg = <0x2d>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio6>; interrupts = ; + interrupt-controller; + #interrupt-cells = <2>; + vcc5-supply = <&vcc_io>; vcc6-supply = <&vcc_io>; regulators { - vcc_rtc: regulator@0 { + vcc_rtc: vrtc { regulator-name = "vcc_rtc"; regulator-always-on; }; - vcc_io: regulator@1 { + vcc_io: vio { regulator-name = "vcc_io"; regulator-always-on; }; - vdd_arm: regulator@2 { + vdd_arm: vdd1 { regulator-name = "vdd_arm"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <1500000>; @@ -107,7 +114,7 @@ vdd_arm: regulator@2 { regulator-always-on; }; - vcc_ddr: regulator@3 { + vcc_ddr: vdd2 { regulator-name = "vcc_ddr"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <1500000>; @@ -115,42 +122,42 @@ vcc_ddr: regulator@3 { regulator-always-on; }; - vcc18_cif: regulator@5 { + vcc18_cif: vdig1 { regulator-name = "vcc18_cif"; regulator-always-on; }; - vdd_11: regulator@6 { + vdd_11: vdig2 { regulator-name = "vdd_11"; regulator-always-on; }; - vcc_25: regulator@7 { + vcc_25: vpll { regulator-name = "vcc_25"; regulator-always-on; }; - vcc_18: regulator@8 { + vcc_18: vdac { regulator-name = "vcc_18"; regulator-always-on; }; - vcc25_hdmi: regulator@9 { + vcc25_hdmi: vaux1 { regulator-name = "vcc25_hdmi"; regulator-always-on; }; - vcca_33: regulator@10 { + vcca_33: vaux2 { regulator-name = "vcca_33"; regulator-always-on; }; - vcc_tp: regulator@11 { + vcc_tp: vaux33 { regulator-name = "vcc_tp"; regulator-always-on; }; - vcc28_cif: regulator@12 { + vcc28_cif: vmmc { regulator-name = "vcc28_cif"; regulator-always-on; }; @@ -158,9 +165,6 @@ vcc28_cif: regulator@12 { }; }; -/* must be included after &tps gets defined */ -#include "../tps65910.dtsi" - &mmc0 { /* sdmmc */ status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/rockchip/rk3066a-marsboard.dts b/arch/arm/boot/dts/rockchip/rk3066a-marsboard.dts index de42d1855121cb..15dbe1677e309c 100644 --- a/arch/arm/boot/dts/rockchip/rk3066a-marsboard.dts +++ b/arch/arm/boot/dts/rockchip/rk3066a-marsboard.dts @@ -96,11 +96,18 @@ &i2c1 { clock-frequency = <400000>; tps: tps@2d { + compatible = "ti,tps65910"; reg = <0x2d>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio6>; interrupts = ; + interrupt-controller; + #interrupt-cells = <2>; + vcc1-supply = <&vsys>; vcc2-supply = <&vsys>; vcc3-supply = <&vsys>; @@ -111,17 +118,17 @@ tps: tps@2d { vccio-supply = <&vsys>; regulators { - vcc_rtc: regulator@0 { + vcc_rtc: vrtc { regulator-name = "vcc_rtc"; regulator-always-on; }; - vcc_io: regulator@1 { + vcc_io: vio { regulator-name = "vcc_io"; regulator-always-on; }; - vdd_arm: regulator@2 { + vdd_arm: vdd1 { regulator-name = "vdd_arm"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <1500000>; @@ -129,7 +136,7 @@ vdd_arm: regulator@2 { regulator-always-on; }; - vcc_ddr: regulator@3 { + vcc_ddr: vdd2 { regulator-name = "vcc_ddr"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <1500000>; @@ -137,41 +144,41 @@ vcc_ddr: regulator@3 { regulator-always-on; }; - vcc18_cif: regulator@5 { + vcc18_cif: vdig1 { regulator-name = "vcc18_cif"; regulator-always-on; }; - vdd_11: regulator@6 { + vdd_11: vdig2 { regulator-name = "vdd_11"; regulator-always-on; }; - vcc_25: regulator@7 { + vcc_25: vpll { regulator-name = "vcc_25"; regulator-always-on; }; - vcc_18: regulator@8 { + vcc_18: vdac { regulator-name = "vcc_18"; regulator-always-on; }; - vcc25_hdmi: regulator@9 { + vcc25_hdmi: vaux1 { regulator-name = "vcc25_hdmi"; regulator-always-on; }; - vcca_33: regulator@10 { + vcca_33: vaux2 { regulator-name = "vcca_33"; regulator-always-on; }; - vcc_rmii: regulator@11 { + vcc_rmii: vaux33 { regulator-name = "vcc_rmii"; }; - vcc28_cif: regulator@12 { + vcc28_cif: vmmc { regulator-name = "vcc28_cif"; regulator-always-on; }; @@ -179,9 +186,6 @@ vcc28_cif: regulator@12 { }; }; -/* must be included after &tps gets defined */ -#include "../tps65910.dtsi" - &emac { phy = <&phy0>; phy-supply = <&vcc_rmii>; diff --git a/arch/arm/boot/dts/rockchip/rk3066a-rayeager.dts b/arch/arm/boot/dts/rockchip/rk3066a-rayeager.dts index b0b029f146436f..07c03ed6fac683 100644 --- a/arch/arm/boot/dts/rockchip/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rockchip/rk3066a-rayeager.dts @@ -198,9 +198,18 @@ &i2c1 { status = "okay"; tps: tps@2d { + compatible = "ti,tps65910"; reg = <0x2d>; + + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio6>; interrupts = ; + + interrupt-controller; + #interrupt-cells = <2>; + pinctrl-names = "default"; pinctrl-0 = <&pmic_int>, <&pwr_hold>; @@ -214,19 +223,19 @@ tps: tps@2d { vccio-supply = <&vsys>; regulators { - vcc_rtc: regulator@0 { + vcc_rtc: vrtc { regulator-name = "vcc_rtc"; regulator-always-on; }; - vcc_io: regulator@1 { + vcc_io: vio { regulator-name = "vcc_io"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - vdd_arm: regulator@2 { + vdd_arm: vdd1 { regulator-name = "vdd_arm"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <1500000>; @@ -234,7 +243,7 @@ vdd_arm: regulator@2 { regulator-boot-on; }; - vcc_ddr: regulator@3 { + vcc_ddr: vdd2 { regulator-name = "vcc_ddr"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <1500000>; @@ -242,52 +251,52 @@ vcc_ddr: regulator@3 { regulator-boot-on; }; - vcc18: regulator@5 { + vcc18: vdig1 { regulator-name = "vcc18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; - vdd_11: regulator@6 { + vdd_11: vdig2 { regulator-name = "vdd_11"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-always-on; }; - vcc_25: regulator@7 { + vcc_25: vpll { regulator-name = "vcc_25"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; regulator-always-on; }; - vccio_wl: regulator@8 { + vccio_wl: vdac { regulator-name = "vccio_wl"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vcc25_hdmi: regulator@9 { + vcc25_hdmi: vaux1 { regulator-name = "vcc25_hdmi"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; }; - vcca_33: regulator@10 { + vcca_33: vaux2 { regulator-name = "vcca_33"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - vcc_rmii: regulator@11 { + vcc_rmii: vaux33 { regulator-name = "vcc_rmii"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - vcc28_cif: regulator@12 { + vcc28_cif: vmmc { regulator-name = "vcc28_cif"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; @@ -296,8 +305,6 @@ vcc28_cif: regulator@12 { }; }; -#include "../tps65910.dtsi" - &i2c2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/rockchip/rk3288-veyron.dtsi b/arch/arm/boot/dts/rockchip/rk3288-veyron.dtsi index 260d6c92cfd11d..2d6cf08d00f906 100644 --- a/arch/arm/boot/dts/rockchip/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3288-veyron.dtsi @@ -388,7 +388,7 @@ &spi2 { rx-sample-delay-ns = <12>; - flash@0 { + spi_flash: flash@0 { compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/arch/arm/boot/dts/rockchip/rk3288.dtsi b/arch/arm/boot/dts/rockchip/rk3288.dtsi index 42d705b544ecb6..7477fc5da3ec99 100644 --- a/arch/arm/boot/dts/rockchip/rk3288.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3288.dtsi @@ -34,10 +34,6 @@ aliases { i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; - mshc0 = &emmc; - mshc1 = &sdmmc; - mshc2 = &sdio0; - mshc3 = &sdio1; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -745,9 +741,6 @@ power: power-controller { #address-cells = <1>; #size-cells = <0>; - assigned-clocks = <&cru SCLK_EDP_24M>; - assigned-clock-parents = <&xin24m>; - /* * Note: Although SCLK_* are the working clocks * of device without including on the NOC, needed for @@ -1197,6 +1190,8 @@ edp: dp@ff970000 { compatible = "rockchip,rk3288-dp"; reg = <0x0 0xff970000 0x0 0x4000>; interrupts = ; + assigned-clocks = <&cru SCLK_EDP_24M>; + assigned-clock-parents = <&xin24m>; clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>; clock-names = "dp", "pclk"; phys = <&edp_phy>; diff --git a/arch/arm/boot/dts/samsung/exynos4210-i9100.dts b/arch/arm/boot/dts/samsung/exynos4210-i9100.dts index df229fb8a16beb..8a635bee59fa9b 100644 --- a/arch/arm/boot/dts/samsung/exynos4210-i9100.dts +++ b/arch/arm/boot/dts/samsung/exynos4210-i9100.dts @@ -853,6 +853,7 @@ &sdhci_3 { #size-cells = <0>; non-removable; + cap-power-off-card; bus-width = <4>; mmc-pwrseq = <&wlan_pwrseq>; vmmc-supply = <&vtf_reg>; diff --git a/arch/arm/boot/dts/samsung/exynos4210-trats.dts b/arch/arm/boot/dts/samsung/exynos4210-trats.dts index 95e0e01b6ff6b7..6bd902cb8f4ad2 100644 --- a/arch/arm/boot/dts/samsung/exynos4210-trats.dts +++ b/arch/arm/boot/dts/samsung/exynos4210-trats.dts @@ -518,6 +518,7 @@ &sdhci_3 { #size-cells = <0>; non-removable; + cap-power-off-card; bus-width = <4>; mmc-pwrseq = <&wlan_pwrseq>; vmmc-supply = <&tflash_reg>; diff --git a/arch/arm/boot/dts/samsung/exynos4210-universal_c210.dts b/arch/arm/boot/dts/samsung/exynos4210-universal_c210.dts index bdc30f8cf748f5..91490693432b68 100644 --- a/arch/arm/boot/dts/samsung/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/samsung/exynos4210-universal_c210.dts @@ -610,6 +610,7 @@ &sdhci_3 { #size-cells = <0>; non-removable; + cap-power-off-card; bus-width = <4>; mmc-pwrseq = <&wlan_pwrseq>; vmmc-supply = <&ldo5_reg>; diff --git a/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi b/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi index 05ddddb565ee36..48245b1665a69c 100644 --- a/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi @@ -1440,6 +1440,7 @@ &sdhci_3 { #address-cells = <1>; #size-cells = <0>; non-removable; + cap-power-off-card; bus-width = <4>; mmc-pwrseq = <&wlan_pwrseq>; diff --git a/arch/arm/boot/dts/st/stih410.dtsi b/arch/arm/boot/dts/st/stih410.dtsi index d56343f44fda4e..07da9b48ccac16 100644 --- a/arch/arm/boot/dts/st/stih410.dtsi +++ b/arch/arm/boot/dts/st/stih410.dtsi @@ -34,6 +34,41 @@ usb2_picophy2: phy3 { status = "disabled"; }; + display-subsystem { + compatible = "st,sti-display-subsystem"; + ports = <&compositor>, <&hqvdp>, <&tvout>, <&sti_hdmi>; + + assigned-clocks = <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 1>, + <&clk_s_c0_pll1 0>, + <&clk_s_c0_flexgen CLK_COMPO_DVP>, + <&clk_s_c0_flexgen CLK_MAIN_DISP>, + <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>, + <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>, + <&clk_s_d2_flexgen CLK_PIX_GDP1>, + <&clk_s_d2_flexgen CLK_PIX_GDP2>, + <&clk_s_d2_flexgen CLK_PIX_GDP3>, + <&clk_s_d2_flexgen CLK_PIX_GDP4>; + + assigned-clock-parents = <0>, + <0>, + <0>, + <&clk_s_c0_pll1 0>, + <&clk_s_c0_pll1 0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 1>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 0>; + + assigned-clock-rates = <297000000>, + <297000000>, + <0>, + <400000000>, + <400000000>; + }; + soc { ohci0: usb@9a03c00 { compatible = "st,st-ohci-300x"; @@ -99,151 +134,174 @@ ehci1: usb@9a83e00 { status = "disabled"; }; - sti-display-subsystem@0 { - compatible = "st,sti-display-subsystem"; - #address-cells = <1>; - #size-cells = <1>; - - reg = <0 0>; - assigned-clocks = <&clk_s_d2_quadfs 0>, - <&clk_s_d2_quadfs 1>, - <&clk_s_c0_pll1 0>, - <&clk_s_c0_flexgen CLK_COMPO_DVP>, - <&clk_s_c0_flexgen CLK_MAIN_DISP>, - <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>, - <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>, - <&clk_s_d2_flexgen CLK_PIX_GDP1>, - <&clk_s_d2_flexgen CLK_PIX_GDP2>, - <&clk_s_d2_flexgen CLK_PIX_GDP3>, - <&clk_s_d2_flexgen CLK_PIX_GDP4>; - - assigned-clock-parents = <0>, - <0>, - <0>, - <&clk_s_c0_pll1 0>, - <&clk_s_c0_pll1 0>, - <&clk_s_d2_quadfs 0>, - <&clk_s_d2_quadfs 1>, - <&clk_s_d2_quadfs 0>, + compositor: display-controller@9d11000 { + compatible = "st,stih407-compositor"; + reg = <0x9d11000 0x1000>; + + clock-names = "compo_main", + "compo_aux", + "pix_main", + "pix_aux", + "pix_gdp1", + "pix_gdp2", + "pix_gdp3", + "pix_gdp4", + "main_parent", + "aux_parent"; + + clocks = <&clk_s_c0_flexgen CLK_COMPO_DVP>, + <&clk_s_c0_flexgen CLK_COMPO_DVP>, + <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>, + <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>, + <&clk_s_d2_flexgen CLK_PIX_GDP1>, + <&clk_s_d2_flexgen CLK_PIX_GDP2>, + <&clk_s_d2_flexgen CLK_PIX_GDP3>, + <&clk_s_d2_flexgen CLK_PIX_GDP4>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 1>; + + reset-names = "compo-main", "compo-aux"; + resets = <&softreset STIH407_COMPO_SOFTRESET>, + <&softreset STIH407_COMPO_SOFTRESET>; + st,vtg = <&vtg_main>, <&vtg_aux>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + compo_main_out: endpoint { + remote-endpoint = <&tvout_in0>; + }; + }; + + port@1 { + reg = <1>; + compo_aux_out: endpoint { + remote-endpoint = <&tvout_in1>; + }; + }; + }; + }; + + tvout: encoder@8d08000 { + compatible = "st,stih407-tvout"; + reg = <0x8d08000 0x1000>; + reg-names = "tvout-reg"; + reset-names = "tvout"; + resets = <&softreset STIH407_HDTVOUT_SOFTRESET>; + assigned-clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>, + <&clk_s_d2_flexgen CLK_TMDS_HDMI>, + <&clk_s_d2_flexgen CLK_REF_HDMIPHY>, + <&clk_s_d0_flexgen CLK_PCM_0>, + <&clk_s_d2_flexgen CLK_PIX_HDDAC>, + <&clk_s_d2_flexgen CLK_HDDAC>; + + assigned-clock-parents = <&clk_s_d2_quadfs 0>, + <&clk_tmdsout_hdmi>, <&clk_s_d2_quadfs 0>, + <&clk_s_d0_quadfs 0>, <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 0>; - assigned-clock-rates = <297000000>, - <297000000>, - <0>, - <400000000>, - <400000000>; - - ranges; - - sti-compositor@9d11000 { - compatible = "st,stih407-compositor"; - reg = <0x9d11000 0x1000>; - - clock-names = "compo_main", - "compo_aux", - "pix_main", - "pix_aux", - "pix_gdp1", - "pix_gdp2", - "pix_gdp3", - "pix_gdp4", - "main_parent", - "aux_parent"; - - clocks = <&clk_s_c0_flexgen CLK_COMPO_DVP>, - <&clk_s_c0_flexgen CLK_COMPO_DVP>, - <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>, - <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>, - <&clk_s_d2_flexgen CLK_PIX_GDP1>, - <&clk_s_d2_flexgen CLK_PIX_GDP2>, - <&clk_s_d2_flexgen CLK_PIX_GDP3>, - <&clk_s_d2_flexgen CLK_PIX_GDP4>, - <&clk_s_d2_quadfs 0>, - <&clk_s_d2_quadfs 1>; - - reset-names = "compo-main", "compo-aux"; - resets = <&softreset STIH407_COMPO_SOFTRESET>, - <&softreset STIH407_COMPO_SOFTRESET>; - st,vtg = <&vtg_main>, <&vtg_aux>; - }; - - sti-tvout@8d08000 { - compatible = "st,stih407-tvout"; - reg = <0x8d08000 0x1000>; - reg-names = "tvout-reg"; - reset-names = "tvout"; - resets = <&softreset STIH407_HDTVOUT_SOFTRESET>; + ports { #address-cells = <1>; - #size-cells = <1>; - assigned-clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>, - <&clk_s_d2_flexgen CLK_TMDS_HDMI>, - <&clk_s_d2_flexgen CLK_REF_HDMIPHY>, - <&clk_s_d0_flexgen CLK_PCM_0>, - <&clk_s_d2_flexgen CLK_PIX_HDDAC>, - <&clk_s_d2_flexgen CLK_HDDAC>; - - assigned-clock-parents = <&clk_s_d2_quadfs 0>, - <&clk_tmdsout_hdmi>, - <&clk_s_d2_quadfs 0>, - <&clk_s_d0_quadfs 0>, - <&clk_s_d2_quadfs 0>, - <&clk_s_d2_quadfs 0>; + #size-cells = <0>; + + port@0 { + reg = <0>; + tvout_in0: endpoint { + remote-endpoint = <&compo_main_out>; + }; + }; + + port@1 { + reg = <1>; + tvout_in1: endpoint { + remote-endpoint = <&compo_aux_out>; + }; + }; + + port@2 { + reg = <2>; + tvout_out0: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + + port@3 { + reg = <3>; + tvout_out1: endpoint { + remote-endpoint = <&hda_in>; + }; + }; }; + }; - sti_hdmi: sti-hdmi@8d04000 { - compatible = "st,stih407-hdmi"; - reg = <0x8d04000 0x1000>; - reg-names = "hdmi-reg"; - #sound-dai-cells = <0>; - interrupts = ; - interrupt-names = "irq"; - clock-names = "pix", - "tmds", - "phy", - "audio", - "main_parent", - "aux_parent"; - - clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>, - <&clk_s_d2_flexgen CLK_TMDS_HDMI>, - <&clk_s_d2_flexgen CLK_REF_HDMIPHY>, - <&clk_s_d0_flexgen CLK_PCM_0>, - <&clk_s_d2_quadfs 0>, - <&clk_s_d2_quadfs 1>; - - hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>; - reset-names = "hdmi"; - resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>; - ddc = <&hdmiddc>; + sti_hdmi: hdmi@8d04000 { + compatible = "st,stih407-hdmi"; + reg = <0x8d04000 0x1000>; + reg-names = "hdmi-reg"; + #sound-dai-cells = <0>; + interrupts = ; + interrupt-names = "irq"; + clock-names = "pix", + "tmds", + "phy", + "audio", + "main_parent", + "aux_parent"; + + clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>, + <&clk_s_d2_flexgen CLK_TMDS_HDMI>, + <&clk_s_d2_flexgen CLK_REF_HDMIPHY>, + <&clk_s_d0_flexgen CLK_PCM_0>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 1>; + + hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>; + reset-names = "hdmi"; + resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>; + ddc = <&hdmiddc>; + + port { + hdmi_in: endpoint { + remote-endpoint = <&tvout_out0>; + }; }; + }; - sti-hda@8d02000 { - compatible = "st,stih407-hda"; - status = "disabled"; - reg = <0x8d02000 0x400>, <0x92b0120 0x4>; - reg-names = "hda-reg", "video-dacs-ctrl"; - clock-names = "pix", - "hddac", - "main_parent", - "aux_parent"; - clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>, - <&clk_s_d2_flexgen CLK_HDDAC>, - <&clk_s_d2_quadfs 0>, - <&clk_s_d2_quadfs 1>; + analog@8d02000 { + compatible = "st,stih407-hda"; + status = "disabled"; + reg = <0x8d02000 0x400>, <0x92b0120 0x4>; + reg-names = "hda-reg", "video-dacs-ctrl"; + clock-names = "pix", + "hddac", + "main_parent", + "aux_parent"; + clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>, + <&clk_s_d2_flexgen CLK_HDDAC>, + <&clk_s_d2_quadfs 0>, + <&clk_s_d2_quadfs 1>; + + port { + hda_in: endpoint { + remote-endpoint = <&tvout_out1>; + }; }; + }; - sti-hqvdp@9c00000 { - compatible = "st,stih407-hqvdp"; - reg = <0x9C00000 0x100000>; - clock-names = "hqvdp", "pix_main"; - clocks = <&clk_s_c0_flexgen CLK_MAIN_DISP>, - <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>; - reset-names = "hqvdp"; - resets = <&softreset STIH407_HDQVDP_SOFTRESET>; - st,vtg = <&vtg_main>; - }; + hqvdp: plane@9c00000 { + compatible = "st,stih407-hqvdp"; + reg = <0x9C00000 0x100000>; + clock-names = "hqvdp", "pix_main"; + clocks = <&clk_s_c0_flexgen CLK_MAIN_DISP>, + <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>; + reset-names = "hqvdp"; + resets = <&softreset STIH407_HDQVDP_SOFTRESET>; + st,vtg = <&vtg_main>; }; bdisp0:bdisp@9f10000 { diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi index fd730aa37c22e0..b9657ff91c234a 100644 --- a/arch/arm/boot/dts/st/stm32mp131.dtsi +++ b/arch/arm/boot/dts/st/stm32mp131.dtsi @@ -29,6 +29,12 @@ arm-pmu { interrupt-parent = <&intc>; }; + arm_wdt: watchdog { + compatible = "arm,smc-wdt"; + arm,smc-id = <0xbc000000>; + status = "disabled"; + }; + firmware { optee { method = "smc"; @@ -1000,6 +1006,7 @@ usbh_ehci: usb@5800d000 { iwdg2: watchdog@5a002000 { compatible = "st,stm32mp1-iwdg"; reg = <0x5a002000 0x400>; + interrupts = ; clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>; clock-names = "pclk", "lsi"; status = "disabled"; @@ -1657,6 +1664,16 @@ usbphyc_port1: usb-phy@1 { reg = <1>; }; }; + + iwdg1: watchdog@5c003000 { + compatible = "st,stm32mp1-iwdg"; + reg = <0x5c003000 0x400>; + interrupts = ; + clocks = <&rcc IWDG1>, <&scmi_clk CK_SCMI_LSI>; + clock-names = "pclk", "lsi"; + access-controllers = <&etzpc 12>; + status = "disabled"; + }; }; /* diff --git a/arch/arm/boot/dts/st/stm32mp135f-dk.dts b/arch/arm/boot/dts/st/stm32mp135f-dk.dts index 9764a6bfa5b428..f894ee35b3db2c 100644 --- a/arch/arm/boot/dts/st/stm32mp135f-dk.dts +++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts @@ -161,6 +161,11 @@ channel@12 { }; }; +&arm_wdt { + timeout-sec = <32>; + status = "okay"; +}; + &crc1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2.dtsi b/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2.dtsi index 9eeb9d6b5eb0ed..7d3a6a3b5d09ea 100644 --- a/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2.dtsi +++ b/arch/arm/boot/dts/st/stm32mp153c-lxa-fairytux2.dtsi @@ -374,9 +374,6 @@ &usbotg_hs { phys = <&usbphyc_port1 0>; phy-names = "usb2-phy"; - vusb_d-supply = <&vdd_usb>; - vusb_a-supply = <®18>; - status = "okay"; }; diff --git a/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi b/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi index bf0c32027baf76..370b2afbf15bf0 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi +++ b/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi @@ -185,13 +185,13 @@ touch@44 { interrupt-parent = <&gpioi>; vio-supply = <&v3v3>; vcc-supply = <&v3v3>; + st,sample-time = <4>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,adc-freq = <1>; touchscreen { compatible = "st,stmpe-ts"; - st,sample-time = <4>; - st,mod-12b = <1>; - st,ref-sel = <0>; - st,adc-freq = <1>; st,ave-ctrl = <1>; st,touch-det-delay = <2>; st,settling = <2>; diff --git a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi index 154698f87b0e51..ab13f0c39892f8 100644 --- a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi @@ -493,9 +493,6 @@ &usbotg_hs { phys = <&usbphyc_port1 0>; phy-names = "usb2-phy"; - vusb_d-supply = <&vdd_usb>; - vusb_a-supply = <®18>; - g-rx-fifo-size = <512>; g-np-tx-fifo-size = <32>; g-tx-fifo-size = <128 128 64 16 16 16 16 16>; diff --git a/arch/arm/boot/dts/ti/omap/Makefile b/arch/arm/boot/dts/ti/omap/Makefile index 1aef60eef67180..14e500846875ec 100644 --- a/arch/arm/boot/dts/ti/omap/Makefile +++ b/arch/arm/boot/dts/ti/omap/Makefile @@ -101,6 +101,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-guardian.dtb \ am335x-icev2.dtb \ am335x-lxm.dtb \ + am335x-mba335x.dtb \ am335x-moxa-uc-2101.dtb \ am335x-moxa-uc-8100-me-t.dtb \ am335x-myirtech-myd.dtb \ diff --git a/arch/arm/boot/dts/ti/omap/am335x-baltos-leds.dtsi b/arch/arm/boot/dts/ti/omap/am335x-baltos-leds.dtsi index 049fd8e1b40f5f..ed194469973e03 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-baltos-leds.dtsi +++ b/arch/arm/boot/dts/ti/omap/am335x-baltos-leds.dtsi @@ -17,18 +17,18 @@ leds { compatible = "gpio-leds"; - led-power { + led_power: led-power { label = "onrisc:red:power"; linux,default-trigger = "default-on"; gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; default-state = "on"; }; - led-wlan { + led_wlan: led-wlan { label = "onrisc:blue:wlan"; gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led-app { + led_app: led-app { label = "onrisc:green:app"; gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; default-state = "off"; diff --git a/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi b/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi index ea47f9960c3566..afb38f023b837a 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi @@ -45,6 +45,23 @@ wl12xx_vmmc: fixedregulator2 { startup-delay-us = <70000>; enable-active-high; }; + + mpcie_regulator: mpcie-regulator { + compatible = "regulator-fixed"; + regulator-name = "mpcie-regulator"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 4 0>; + enable-active-high; + regulator-boot-on; + }; + + mpcie_power_switch: mpcie-power-switch { + compatible = "regulator-output"; + regulator-name = "mpcie-power-switch"; + regulator-supplies = "vcc"; + vout-supply = <&mpcie_regulator>; + }; }; &am33xx_pinmux { diff --git a/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi b/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi index ad1e60a9b6fde8..1d83fc116b6624 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/am335x-bone-common.dtsi @@ -16,7 +16,7 @@ memory@80000000 { }; chosen { - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; }; leds { @@ -217,7 +217,7 @@ tps: pmic@24 { }; baseboard_eeprom: eeprom@50 { - compatible = "atmel,24c256"; + compatible = "atmel,24c32"; reg = <0x50>; vcc-supply = <&ldo4_reg>; diff --git a/arch/arm/boot/dts/ti/omap/am335x-boneblue.dts b/arch/arm/boot/dts/ti/omap/am335x-boneblue.dts index f579df4c2c540d..d430f0bef16537 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-boneblue.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-boneblue.dts @@ -13,7 +13,7 @@ / { compatible = "ti,am335x-bone-blue", "ti,am33xx"; chosen { - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; }; leds { diff --git a/arch/arm/boot/dts/ti/omap/am335x-chiliboard.dts b/arch/arm/boot/dts/ti/omap/am335x-chiliboard.dts index 648e97fe1dfd5e..ae5bc589849722 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-chiliboard.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-chiliboard.dts @@ -12,7 +12,7 @@ / { "ti,am33xx"; chosen { - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; }; leds { diff --git a/arch/arm/boot/dts/ti/omap/am335x-evm.dts b/arch/arm/boot/dts/ti/omap/am335x-evm.dts index 20222f82f21bfd..856fa1191ed24e 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-evm.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-evm.dts @@ -23,7 +23,7 @@ memory@80000000 { }; chosen { - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; }; vbat: fixedregulator0 { diff --git a/arch/arm/boot/dts/ti/omap/am335x-evmsk.dts b/arch/arm/boot/dts/ti/omap/am335x-evmsk.dts index eba888dcd60e7f..d8baccdf8bc463 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-evmsk.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-evmsk.dts @@ -30,7 +30,7 @@ memory@80000000 { }; chosen { - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; }; vbat: fixedregulator0 { diff --git a/arch/arm/boot/dts/ti/omap/am335x-guardian.dts b/arch/arm/boot/dts/ti/omap/am335x-guardian.dts index 4b070e634b2810..6ce3a2d029eedc 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-guardian.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-guardian.dts @@ -14,7 +14,7 @@ / { compatible = "bosch,am335x-guardian", "ti,am33xx"; chosen { - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; tick-timer = &timer2; }; diff --git a/arch/arm/boot/dts/ti/omap/am335x-icev2.dts b/arch/arm/boot/dts/ti/omap/am335x-icev2.dts index 6f0f4fba043b96..ba488bba6925de 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-icev2.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-icev2.dts @@ -22,7 +22,7 @@ memory@80000000 { }; chosen { - stdout-path = &uart3; + stdout-path = "serial3:115200n8"; }; vbat: fixedregulator0 { diff --git a/arch/arm/boot/dts/ti/omap/am335x-mba335x.dts b/arch/arm/boot/dts/ti/omap/am335x-mba335x.dts new file mode 100644 index 00000000000000..8c0b2a1c99b120 --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/am335x-mba335x.dts @@ -0,0 +1,633 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2021-2025 TQ-Systems GmbH , D-82229 Seefeld, Germany. + * Authors: Gregor Herburger, Matthias Schiffer + * + * Based on: + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + */ +/dts-v1/; + +#include +#include +#include "am335x-tqma335x.dtsi" + +/ { + model = "TQ-Systems TQMa335x[L] SoM on MBa335x carrier board"; + compatible = "tq,tqma3359-mba335x", "tq,tqma3359", "ti,am33xx"; + chassis-type = "embedded"; + + chosen { + stdout-path = &uart4; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <0 58 61 66 75 90 125 170 255>; + default-brightness-level = <7>; + enable-gpios = <&expander1 4 GPIO_ACTIVE_HIGH>; + power-supply = <®_mba335x_12v>; + status = "disabled"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-s5 { + label = "S5"; + linux,code = ; + gpios = <&expander2 0 GPIO_ACTIVE_LOW>; + }; + + button-s6 { + label = "S6"; + linux,code = ; + gpios = <&expander2 1 GPIO_ACTIVE_LOW>; + }; + + button-s7 { + label = "S7"; + linux,code = ; + gpios = <&expander2 2 GPIO_ACTIVE_LOW>; + }; + }; + + reg_mba335x_12v: regulator-12v { + compatible = "regulator-fixed"; + regulator-name = "MBa335x-V12"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + vcc3v3: regulator-vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "tqm-tlv320aic32"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line In", + "Line", "Line Out", + "Microphone", "Mic Jack"; + simple-audio-card,routing = + "Headphone Jack", "HPL", + "Headphone Jack", "HPR", + "Line Out", "LOL", + "Line Out", "LOR", + "IN3_L", "Mic Jack", + "Mic Jack", "Mic Bias", + "Line In", "IN1_L", + "Line In", "IN1_R"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + + simple-audio-card,cpu { + sound-dai = <&mcasp0>; + #sound-dai-cells = <0>; + system-clock-direction-out; + }; + + sound_master: simple-audio-card,codec { + sound-dai = <&tlv320aic32x4>; + system-clock-frequency = <24000000>; + system-clock-direction-out; + }; + }; +}; + +&am33xx_pinmux { + codec_pins: codec-pins { + pinctrl-single,pins = < + /* xdma_event_intr0.clkout1 */ + AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE3) + >; + }; + + cpsw_default_pins: cpsw-default-pins { + pinctrl-single,pins = < + /* Port 1 */ + /* mii1_tx_en.rgmii1_tctl */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + /* mii1_rx_dv.rgmii1_rctl */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2) + /* mii1_txd3.rgmii1_td3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + /* mii1_txd2.rgmii1_td2 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + /* mii1_txd1.rgmii1_td1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + /* mii1_txd0.rgmii1_td0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + /* mii1_tx_clk.rgmii1_tclk */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + /* mii1_rx_clk.rgmii1_rclk */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2) + /* mii1_rxd3.rgmii1_rd3 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2) + /* mii1_rxd2.rgmii1_rd2 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2) + /* mii1_rxd1.rgmii1_rd1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2) + /* mii1_rxd0.rgmii1_rd0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2) + + /* Port 2 */ + /* gpmc_a0.rgmii2_tctl */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + /* gpmc_a1.rgmii2_rctl */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2) + /* gpmc_a2.rgmii2_td3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + /* gpmc_a3.rgmii2_td2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + /* gpmc_a4.rgmii2_td1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + /* gpmc_a5.rgmii2_td0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + /* gpmc_a6.rgmii2_tclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + /* gpmc_a7.rgmii2_rclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2) + /* gpmc_a8.rgmii2_rd3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2) + /* gpmc_a9.rgmii2_rd2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2) + /* gpmc_a10.rgmii2_rd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2) + /* gpmc_a11.rgmii2_rd0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2) + >; + }; + + cpsw_sleep_pins: cpsw-sleep-pins { + pinctrl-single,pins = < + /* Port 1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7) + + /* Port 2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7) + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7) + >; + }; + + davinci_mdio_default_pins: davinci_mdio-default-pins { + pinctrl-single,pins = < + /* mdio.mdio_data */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0) + /* mdc.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0) + >; + }; + + davinci_mdio_sleep_pins: davinci_mdio-sleep-pins { + pinctrl-single,pins = < + /* mdio.mdio_data */ + AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP, MUX_MODE7) + /* mdc.mdio_clk */ + AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLUP, MUX_MODE7) + >; + }; + + davinci_mdio_phy0_pins: davinci_mdio-phy0-pins { + pinctrl-single,pins = < + /* usb0_drvvbus.gpio0_18 - PHY interrupt */ + AM33XX_PADCONF(AM335X_PIN_USB0_DRVVBUS, PIN_INPUT, MUX_MODE7) + >; + }; + + davinci_mdio_phy1_pins: davinci_mdio-phy1-pins { + pinctrl-single,pins = < + /* gpmc_csn0.gpio1_29 - PHY interrupt */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_INPUT, MUX_MODE7) + >; + }; + + dcan0_pins: dcan0-pins { + pinctrl-single,pins = < + /* uart1_ctsn.d_can0_tx */ + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + /* uart1_rtsn.d_can0_rx */ + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) + >; + }; + + dcan1_pins: dcan1-pins { + pinctrl-single,pins = < + /* uart0_ctsn.d_can1_tx */ + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE2) + /* uart0_rtsn.d_can1_rx */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) + >; + }; + + ecap2_pins: ecap2-pins { + pinctrl-single,pins = < + /* mcasp0_ahclkr.ecap2_in_pwm2_out */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT, MUX_MODE4) + >; + }; + + expander1_pins: expander1-pins { + pinctrl-single,pins = < + /* gpmc_csn3.gpio2_0 - interrupt */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE7 ) + >; + }; + + expander2_pins: expander2-pins { + pinctrl-single,pins = < + /* gpmc_ben1.gpio1_28 - interrupt */ + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLUP, MUX_MODE7) + >; + }; + + i2c1_pins: i2c1-pins { + pinctrl-single,pins = < + /* uart1_rxd.i2c1_sda */ + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE3) + /* uart1_txd.i2c1_scl */ + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLUP, MUX_MODE3) + >; + }; + + lcd_pins: lcd-pins { + pinctrl-single,pins = < + /* gpmc_ad8.lcd_data23 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1) + /* gpmc_ad9.lcd_data22 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1) + /* gpmc_ad10.lcd_data21 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1) + /* gpmc_ad11.lcd_data20 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1) + /* gpmc_ad12.lcd_data19 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1) + /* gpmc_ad13.lcd_data18 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1) + /* gpmc_ad14.lcd_data17 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1) + /* gpmc_ad15.lcd_data16 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1) + /* lcd_data0.lcd_data0 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0) + /* lcd_data1.lcd_data1 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0) + /* lcd_data2.lcd_data2 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0) + /* lcd_data3.lcd_data3 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0) + /* lcd_data4.lcd_data4 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0) + /* lcd_data5.lcd_data5 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0) + /* lcd_data6.lcd_data6 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0) + /* lcd_data7.lcd_data7 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0) + /* lcd_data8.lcd_data8 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0) + /* lcd_data9.lcd_data9 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0) + /* lcd_data10.lcd_data10 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0) + /* lcd_data11.lcd_data11 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0) + /* lcd_data12.lcd_data12 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0) + /* lcd_data13.lcd_data13 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0) + /* lcd_data14.lcd_data14 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0) + /* lcd_data15.lcd_data15 */ + AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0) + /* lcd_vsync.lcd_vsync */ + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0) + /* lcd_hsync.lcd_hsync */ + AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0) + /* lcd_pclk.lcd_pclk */ + AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0) + /* lcd_ac_bias_en.lcd_ac_bias_en */ + AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0) + >; + }; + + mcasp0_pins: mcasp0-pins { + pinctrl-single,pins = < + /* mcasp0_fsx.mcasp0_fsx */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0) + /* mcasp0_aclkx.mcasp0_aclkx*/ + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0) + /* mcasp0_axr0.mcasp0_axr0 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE0) + /* mcasp0_axr1.mcasp0_axr1 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE0) + /* mcasp0_aclkr.mcasp0_aclkr */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLDOWN, MUX_MODE0) + /* mcasp0_fsr.mcasp0_fsr */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSR, PIN_INPUT_PULLDOWN, MUX_MODE0) + >; + }; + + mmc1_pins: mmc1-pins { + pinctrl-single,pins = < + /* mmc0_dat3.mmc0_dat3 */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + /* mmc0_dat2.mmc0_dat2 */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + /* mmc0_dat1.mmc0_dat1 */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + /* mmc0_dat0.mmc0_dat0 */ + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + /* mmc0_clk.mmc0_clk */ + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + /* mmc0_cmd.mmc0_cmd */ + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) + >; + }; + + polytouch_pins: polytouch-pins { + pinctrl-single,pins = < + /* gpmc_clk.gpio2_1 - touch interrupt */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE7) + >; + }; + + uart0_pins: uart0-pins { + pinctrl-single,pins = < + /* uart0_rxd.uart0_rxd */ + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + /* uart0_txd.uart0_txd */ + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + >; + }; + + uart3_pins: uart3-pins { + pinctrl-single,pins = < + /* spi0_cs1.uart3_rxd */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE1) + /* ecap0_in_pwm0_out.uart3_txd */ + AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT_PULLDOWN, MUX_MODE1) + >; + }; + + uart4_pins: uart4-pins { + pinctrl-single,pins = < + /* gpmc_wait0.uart4_rxd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6) + /* gpmc_wpn.uart4_txd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLDOWN, MUX_MODE6) + >; + }; +}; + +&cpsw_port1 { + phy-handle = <ðphy0>; + phy-mode = "rgmii-id"; + ti,dual-emac-pvid = <1>; +}; + +&cpsw_port2 { + phy-handle = <ðphy1>; + phy-mode = "rgmii-id"; + ti,dual-emac-pvid = <2>; +}; + +&davinci_mdio_sw { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default_pins>; + pinctrl-1 = <&davinci_mdio_sleep_pins>; + status = "okay"; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&davinci_mdio_phy0_pins>; + interrupt-parent = <&gpio0>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + rxc-skew-ps = <1860>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + rxdv-skew-ps = <0>; + txc-skew-ps = <1860>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + txen-skew-ps = <0>; + }; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&davinci_mdio_phy1_pins>; + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + rxc-skew-ps = <1860>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + rxdv-skew-ps = <0>; + txc-skew-ps = <1860>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + txen-skew-ps = <0>; + }; +}; + +&dcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan0_pins>; + status = "okay"; +}; + +&dcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins>; + status = "okay"; +}; + +&ds1339 { + interrupt-parent = <&expander2>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; +}; + +&ecap2 { + pinctrl-names = "default"; + pinctrl-0 = <&ecap2_pins>; +}; + +&i2c0 { + tlv320aic32x4: audio-codec@18 { + compatible = "ti,tlv320aic32x4"; + reg = <0x18>; + pinctrl-names = "default"; + pinctrl-0 = <&codec_pins>; + clocks = <&clk_24mhz>; + clock-names = "mclk"; + iov-supply = <&vcc3v3>; + ldoin-supply = <&vcc3v3>; + #sound-dai-cells = <0>; + }; + + jc42_2: temperature-sensor@19 { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; + reg = <0x19>; + }; + + expander1: gpio@20 { + compatible = "nxp,pca9554"; + reg = <0x20>; + pinctrl-names = "default"; + pinctrl-0 = <&expander1_pins>; + vcc-supply = <&vcc3v3>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio2>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + }; + + expander2: gpio@21 { + compatible = "nxp,pca9554"; + reg = <0x21>; + pinctrl-names = "default"; + pinctrl-0 = <&expander2_pins>; + vcc-supply = <&vcc3v3>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + }; + + eeprom3: eeprom@51 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + vcc-supply = <&vcc3v3>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <100000>; + status = "okay"; +}; + +&lcdc { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + blue-and-red-wiring = "crossed"; +}; + +&mac_sw { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default_pins>; + pinctrl-1 = <&cpsw_sleep_pins>; + status = "okay"; +}; + +&mcasp0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcasp0_pins>; + #sound-dai-cells = <0>; + op-mode = <0>; + tdm-slots = <2>; + /* 16 serializer */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 2 1 0 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vcc3v3>; + bus-width = <4>; + no-1-8-v; + no-mmc; + no-sdio; + status = "okay"; +}; + +&tps { + interrupt-parent = <&expander2>; + interrupts = <4 IRQ_TYPE_EDGE_RISING>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + status = "okay"; +}; + +&usb0 { + dr_mode = "host"; +}; + +&usb1 { + /* Should be "otg", but role switching currently doesn't work */ + dr_mode = "peripheral"; +}; + +/* SOM supply */ +&vcc3v3in { + vin-supply = <&vcc3v3>; +}; diff --git a/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts b/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts index 06a352f98b220b..476a6bdaf43f38 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts @@ -15,7 +15,7 @@ / { compatible = "myir,myd-am335x", "myir,myc-am335x", "ti,am33xx"; chosen { - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; }; clk12m: clk12m { diff --git a/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-2xx.dts b/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-2xx.dts index f66d57bb685ee1..f0519ab3014160 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-2xx.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-netcom-plus-2xx.dts @@ -222,10 +222,10 @@ &gpio3 { "ModeA1", "ModeA2", "ModeA3", - "NC", - "NC", - "NC", - "NC", + "ModeB0", + "ModeB1", + "ModeB2", + "ModeB3", "NC", "NC", "NC", diff --git a/arch/arm/boot/dts/ti/omap/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/ti/omap/am335x-osd3358-sm-red.dts index d28d3972884765..23caaaabf35134 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-osd3358-sm-red.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-osd3358-sm-red.dts @@ -147,7 +147,7 @@ simple-audio-card,codec { }; chosen { - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; }; leds { diff --git a/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts b/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts index c9ccb9de21ad7b..9f611debc20907 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts @@ -21,7 +21,7 @@ / { compatible = "ti,am33xx"; chosen { - stdout-path = &uart3; + stdout-path = "serial3:115200n8"; }; cpus { diff --git a/arch/arm/boot/dts/ti/omap/am335x-pepper.dts b/arch/arm/boot/dts/ti/omap/am335x-pepper.dts index e7d561a527fdd9..10d54e0ad15a7f 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-pepper.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-pepper.dts @@ -347,7 +347,7 @@ &mmc3 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&wireless_pins>; - vmmmc-supply = <&v3v3c_reg>; + vmmc-supply = <&v3v3c_reg>; bus-width = <4>; non-removable; dmas = <&edma_xbar 12 0 1 diff --git a/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts b/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts index 78ce860e59b3de..24d9f90fad01f7 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-pocketbeagle.dts @@ -15,7 +15,7 @@ / { compatible = "ti,am335x-pocketbeagle", "ti,am335x-bone", "ti,am33xx"; chosen { - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; }; leds { diff --git a/arch/arm/boot/dts/ti/omap/am335x-sancloud-bbe-extended-wifi.dts b/arch/arm/boot/dts/ti/omap/am335x-sancloud-bbe-extended-wifi.dts index 7c9f65126c6361..8b47f45a9959c6 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-sancloud-bbe-extended-wifi.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-sancloud-bbe-extended-wifi.dts @@ -87,7 +87,6 @@ &mmc3 { bus-width = <4>; non-removable; cap-power-off-card; - ti,needs-special-hs-handling; keep-power-in-suspend; pinctrl-names = "default"; pinctrl-0 = <&mmc3_pins>; diff --git a/arch/arm/boot/dts/ti/omap/am335x-sl50.dts b/arch/arm/boot/dts/ti/omap/am335x-sl50.dts index f3524e5ee43e27..1dc4e344efd63e 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-sl50.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-sl50.dts @@ -25,7 +25,7 @@ memory@80000000 { }; chosen { - stdout-path = &uart0; + stdout-path = "serial0:115200n8"; }; leds { diff --git a/arch/arm/boot/dts/ti/omap/am335x-tqma335x.dtsi b/arch/arm/boot/dts/ti/omap/am335x-tqma335x.dtsi new file mode 100644 index 00000000000000..b75949f0f023ab --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/am335x-tqma335x.dtsi @@ -0,0 +1,270 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2014-2025 TQ-Systems GmbH , D-82229 Seefeld, Germany. + * Authors: Gregor Herburger, Matthias Schiffer + * + * Based on: + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include +#include "am33xx.dtsi" + +/ { + compatible = "tq,tqma3359", "ti,am33xx"; + + aliases { + mmc0 = &mmc2; + mmc1 = &mmc1; + /delete-property/ mmc2; + rtc0 = &tps; + rtc1 = &ds1339; + rtc2 = &rtc; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + /* SOM input voltage */ + vcc3v3in: regulator-vcc3v3in { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3IN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + /* + * Regulator is enabled by PMIC power sequence. The supplied voltage + * rail is also usable on baseboard. + */ + vddshv: regulator-vddshv { + compatible = "regulator-fixed"; + regulator-name = "VDDSHV"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + vin-supply = <&vcc3v3in>; + }; +}; + +&am33xx_pinmux { + i2c0_pins: i2c0-pins { + pinctrl-single,pins = < + /* i2c0_sda.i2c0_sda */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0) + /* i2c0_scl.i2c0_scl */ + AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0) + >; + }; + + mmc2_pins: mmc2-pins { + pinctrl-single,pins = < + /* gpmc_ad0.mmc1_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, SLEWCTRL_SLOW | PIN_INPUT_PULLUP, MUX_MODE1) + /* gpmc_ad1.mmc1_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, SLEWCTRL_SLOW | PIN_INPUT_PULLUP, MUX_MODE1) + /* gpmc_ad2.mmc1_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, SLEWCTRL_SLOW | PIN_INPUT_PULLUP, MUX_MODE1) + /* gpmc_ad3.mmc1_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, SLEWCTRL_SLOW | PIN_INPUT_PULLUP, MUX_MODE1) + /* gpmc_ad4.mmc1_dat4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, SLEWCTRL_SLOW | PIN_INPUT_PULLUP, MUX_MODE1) + /* gpmc_ad5.mmc1_dat5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, SLEWCTRL_SLOW | PIN_INPUT_PULLUP, MUX_MODE1) + /* gpmc_ad6.mmc1_dat6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, SLEWCTRL_SLOW | PIN_INPUT_PULLUP, MUX_MODE1) + /* gpmc_ad7.mmc1_dat7 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, SLEWCTRL_SLOW | PIN_INPUT_PULLUP, MUX_MODE1) + /* gpmc_csn1.mmc1_clk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) + /* gpmc_csn2.mmc1_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, SLEWCTRL_SLOW | PIN_INPUT_PULLUP, MUX_MODE2) + >; + }; + + spi0_pins: spi0-pins { + pinctrl-single,pins = < + /* spi0_sclk.spi0_sclk */ + AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE0) + /* spi0_d0.spi0_d0 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLDOWN, MUX_MODE0) + /* spi0_d1.spi0_d1 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_OUTPUT, MUX_MODE0) + /* spi0_cs0.spi0_cs0 */ + AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_OUTPUT, MUX_MODE0) + >; + }; +}; + +&cpu { + cpu0-supply = <&vdd1_reg>; +}; + +&elm { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <100000>; + status = "okay"; + + /* optional, not on TQMa335xL */ + jc42_1: temperature-sensor@1f { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; + reg = <0x1f>; + }; + + tps: pmic@2d { + reg = <0x2d>; + ti,en-ck32k-xtal; + /* Filled in by tps65910.dtsi */ + }; + + /* optional, not on TQMa335xL */ + eeprom: eeprom@50 { + compatible = "st,24c64", "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + vcc-supply = <&vddshv>; + }; + + /* optional, not on TQMa335xL */ + se97btp: eeprom@57 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x57>; + pagesize = <16>; + vcc-supply = <&vddshv>; + }; + + /* optional, not on TQMa335xL */ + ds1339: rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +#include "../../tps65910.dtsi" + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + bus-width = <8>; + no-1-8-v; + no-sd; + no-sdio; + vmmc-supply = <&vddshv>; + non-removable; + status = "okay"; +}; + +&rtc { + status = "disabled"; +}; + +&tps { + vcc1-supply = <&vcc3v3in>; + vcc2-supply = <&vcc3v3in>; + vcc3-supply = <&vcc3v3in>; + vcc4-supply = <&vcc3v3in>; + vcc5-supply = <&vcc3v3in>; + vcc6-supply = <&vcc3v3in>; + vcc7-supply = <&vcc3v3in>; + vccio-supply = <&vcc3v3in>; +}; + +/* TPS outputs */ +&vrtc_reg { + regulator-always-on; +}; + +&vio_reg { + regulator-always-on; +}; + +&vdd1_reg { + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; +}; + +&vdd2_reg { + regulator-name = "vdd_core"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; +}; + +&vdd3_reg { + regulator-always-on; +}; + +&vdig1_reg { + regulator-always-on; +}; + +&vdig2_reg { + regulator-always-on; +}; + +&vpll_reg { + regulator-always-on; +}; + +&vdac_reg { + regulator-always-on; +}; + +&vaux1_reg { + regulator-always-on; +}; + +&vaux2_reg { + regulator-always-on; +}; + +&vaux33_reg { + regulator-always-on; +}; + +&vmmc_reg { + regulator-always-on; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <24000000>; + vcc-supply = <&vddshv>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + }; + }; +}; + +&usb0_phy { + vcc-supply = <&vaux1_reg>; +}; + +&usb1_phy { + vcc-supply = <&vaux1_reg>; +}; + +&wkup_m3_ipc { + firmware-name = "am335x-evm-scale-data.bin"; +}; diff --git a/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi b/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi index 18ad52e9395510..89d16fcc773e0f 100644 --- a/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi @@ -1501,7 +1501,6 @@ SYSC_OMAP2_SOFTRESET | mmc1: mmc@0 { compatible = "ti,am335-sdhci"; - ti,needs-special-reset; dmas = <&edma 24 0>, <&edma 25 0>; dma-names = "tx", "rx"; interrupts = <64>; @@ -1987,7 +1986,6 @@ SYSC_OMAP2_SOFTRESET | mmc2: mmc@0 { compatible = "ti,am335-sdhci"; - ti,needs-special-reset; dmas = <&edma 2 0 &edma 3 0>; dma-names = "tx", "rx"; diff --git a/arch/arm/boot/dts/ti/omap/am33xx.dtsi b/arch/arm/boot/dts/ti/omap/am33xx.dtsi index 43ec2a95f4bb7a..ca3e7f5d7d0dcd 100644 --- a/arch/arm/boot/dts/ti/omap/am33xx.dtsi +++ b/arch/arm/boot/dts/ti/omap/am33xx.dtsi @@ -45,7 +45,7 @@ aliases { cpus { #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu: cpu@0 { compatible = "arm,cortex-a8"; enable-method = "ti,am3352"; device_type = "cpu"; @@ -338,7 +338,6 @@ SYSC_OMAP2_SOFTRESET | mmc3: mmc@0 { compatible = "ti,am335-sdhci"; - ti,needs-special-reset; interrupts = <29>; reg = <0x0 0x1000>; status = "disabled"; diff --git a/arch/arm/boot/dts/ti/omap/am4372.dtsi b/arch/arm/boot/dts/ti/omap/am4372.dtsi index 0a1df30f2818b2..504fa6b57d39be 100644 --- a/arch/arm/boot/dts/ti/omap/am4372.dtsi +++ b/arch/arm/boot/dts/ti/omap/am4372.dtsi @@ -321,7 +321,6 @@ SYSC_OMAP2_SOFTRESET | mmc3: mmc@0 { compatible = "ti,am437-sdhci"; - ti,needs-special-reset; interrupts = ; reg = <0x0 0x1000>; status = "disabled"; diff --git a/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi b/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi index fd4634f8c62937..e08f356e71cb0c 100644 --- a/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi +++ b/arch/arm/boot/dts/ti/omap/am437x-l4.dtsi @@ -1103,7 +1103,6 @@ SYSC_OMAP2_SOFTRESET | mmc1: mmc@0 { compatible = "ti,am437-sdhci"; reg = <0x0 0x1000>; - ti,needs-special-reset; dmas = <&edma 24 0>, <&edma 25 0>; dma-names = "tx", "rx"; @@ -1620,7 +1619,6 @@ SYSC_OMAP2_SOFTRESET | mmc2: mmc@0 { compatible = "ti,am437-sdhci"; reg = <0x0 0x1000>; - ti,needs-special-reset; dmas = <&edma 2 0>, <&edma 3 0>; dma-names = "tx", "rx"; diff --git a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts index e6a18954e449e4..43cf4ade950b64 100644 --- a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts +++ b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts @@ -545,7 +545,6 @@ &mmc2 { non-removable; mmc-pwrseq = <&emmc_pwrseq>; - ti,needs-special-reset; dmas = <&sdma_xbar 47>, <&sdma_xbar 48>; dma-names = "tx", "rx"; @@ -561,7 +560,6 @@ &mmc4 { /* DDR50: DDR up to 50 MHz (1.8 V signaling). */ status = "okay"; - ti,needs-special-reset; vmmc-supply = <&vdd_3v3>; cap-power-off-card; keep-power-in-suspend; diff --git a/arch/arm/boot/dts/ti/omap/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/ti/omap/am57xx-cl-som-am57x.dts index 3dd898955e767e..77c9fbb3bfbd82 100644 --- a/arch/arm/boot/dts/ti/omap/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/ti/omap/am57xx-cl-som-am57x.dts @@ -481,7 +481,6 @@ &mmc2 { vmmc-supply = <&vdd_3v3>; bus-width = <8>; ti,non-removable; - cap-mmc-dual-data-rate; }; &qspi { diff --git a/arch/arm/boot/dts/ti/omap/omap3-beagle-xm.dts b/arch/arm/boot/dts/ti/omap/omap3-beagle-xm.dts index 08ee0f8ea68fda..71b39a923d37c6 100644 --- a/arch/arm/boot/dts/ti/omap/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/ti/omap/omap3-beagle-xm.dts @@ -291,7 +291,7 @@ codec { }; twl_power: power { - compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off"; + compatible = "ti,twl4030-power-idle-osc-off"; ti,use_poweroff; }; }; diff --git a/arch/arm/boot/dts/ti/omap/omap3-n900.dts b/arch/arm/boot/dts/ti/omap/omap3-n900.dts index c50ca572d1b9b5..7db73d9bed9e4b 100644 --- a/arch/arm/boot/dts/ti/omap/omap3-n900.dts +++ b/arch/arm/boot/dts/ti/omap/omap3-n900.dts @@ -508,7 +508,7 @@ twl_audio: audio { }; twl_power: power { - compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off"; + compatible = "ti,twl4030-power-idle-osc-off"; ti,use_poweroff; }; }; diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 3389a70e4d4978..04ff75dcc20e75 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -1371,7 +1371,7 @@ static void sa1111_bus_remove(struct device *dev) drv->remove(sadev); } -struct bus_type sa1111_bus_type = { +const struct bus_type sa1111_bus_type = { .name = "sa1111-rab", .match = sa1111_match, .probe = sa1111_bus_probe, diff --git a/arch/arm/configs/am200epdkit_defconfig b/arch/arm/configs/am200epdkit_defconfig index 134a559aba3dd5..2367b1685c1cf8 100644 --- a/arch/arm/configs/am200epdkit_defconfig +++ b/arch/arm/configs/am200epdkit_defconfig @@ -68,7 +68,6 @@ CONFIG_SOUND=m CONFIG_SND=m CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m -# CONFIG_SND_SUPPORT_OLD_API is not set # CONFIG_SND_VERBOSE_PROCFS is not set CONFIG_SND_PXA2XX_AC97=m CONFIG_USB_GADGET=y diff --git a/arch/arm/configs/aspeed_g4_defconfig b/arch/arm/configs/aspeed_g4_defconfig index 28b724d59e7e23..45d8738abb750b 100644 --- a/arch/arm/configs/aspeed_g4_defconfig +++ b/arch/arm/configs/aspeed_g4_defconfig @@ -117,7 +117,6 @@ CONFIG_KEYBOARD_GPIO_POLLED=y # CONFIG_VT is not set # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=6 CONFIG_SERIAL_8250_RUNTIME_UARTS=6 diff --git a/arch/arm/configs/aspeed_g5_defconfig b/arch/arm/configs/aspeed_g5_defconfig index 61cee1e7ebea61..2e6ea13c1e9be7 100644 --- a/arch/arm/configs/aspeed_g5_defconfig +++ b/arch/arm/configs/aspeed_g5_defconfig @@ -138,7 +138,6 @@ CONFIG_SERIO_RAW=y # CONFIG_VT is not set # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=6 CONFIG_SERIAL_8250_RUNTIME_UARTS=6 @@ -308,7 +307,7 @@ CONFIG_PANIC_ON_OOPS=y CONFIG_PANIC_TIMEOUT=-1 CONFIG_SOFTLOCKUP_DETECTOR=y CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y -CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y +CONFIG_BOOTPARAM_HUNG_TASK_PANIC=1 CONFIG_WQ_WATCHDOG=y # CONFIG_SCHED_DEBUG is not set CONFIG_FUNCTION_TRACER=y diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index ff13e1ecf4bb95..4f1153098b16f4 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -181,7 +181,7 @@ CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_OF_AT91=y CONFIG_MMC_ATMELMCI=y -CONFIG_MMC_SPI=y +CONFIG_MMC_SPI=m CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y diff --git a/arch/arm/configs/axm55xx_defconfig b/arch/arm/configs/axm55xx_defconfig index 242a61208a0f80..22b189090e15f4 100644 --- a/arch/arm/configs/axm55xx_defconfig +++ b/arch/arm/configs/axm55xx_defconfig @@ -232,4 +232,3 @@ CONFIG_RCU_CPU_STALL_TIMEOUT=60 CONFIG_DEBUG_USER=y CONFIG_CRYPTO_GCM=y CONFIG_CRYPTO_SHA256=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/clps711x_defconfig b/arch/arm/configs/clps711x_defconfig index 6fa3477e6b026d..f66d502ce2efcc 100644 --- a/arch/arm/configs/clps711x_defconfig +++ b/arch/arm/configs/clps711x_defconfig @@ -75,5 +75,4 @@ CONFIG_MINIX_FS=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y CONFIG_EARLY_PRINTK=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig index bb6c4748bfc80a..e98c35df675e65 100644 --- a/arch/arm/configs/dove_defconfig +++ b/arch/arm/configs/dove_defconfig @@ -126,7 +126,6 @@ CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_LZO=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_DEV_MARVELL_CESA=y CONFIG_PRINTK_TIME=y # CONFIG_DEBUG_BUGVERBOSE is not set diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index 7f3756d8b086d2..9f3c7324d1cf48 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -119,4 +119,3 @@ CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/hisi_defconfig b/arch/arm/configs/hisi_defconfig index e19c1039fb9384..384aade1a48bb5 100644 --- a/arch/arm/configs/hisi_defconfig +++ b/arch/arm/configs/hisi_defconfig @@ -35,7 +35,6 @@ CONFIG_NETDEVICES=y CONFIG_HIX5HD2_GMAC=y CONFIG_HIP04_ETH=y CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig index e6ec768f42e2cd..d57285cfefb29d 100644 --- a/arch/arm/configs/jornada720_defconfig +++ b/arch/arm/configs/jornada720_defconfig @@ -92,4 +92,3 @@ CONFIG_NLS_UTF8=m CONFIG_DEBUG_KERNEL=y # CONFIG_FTRACE is not set CONFIG_DEBUG_LL=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index c1291ca290b23c..b0cadd8781526e 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -228,7 +228,6 @@ CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CTR=y CONFIG_CRYPTO_XCBC=y -CONFIG_CRYPTO_ANSI_CPRNG=y CONFIG_CRYPTO_USER_API_HASH=y CONFIG_CRYPTO_USER_API_SKCIPHER=y CONFIG_DMA_CMA=y diff --git a/arch/arm/configs/lpc18xx_defconfig b/arch/arm/configs/lpc18xx_defconfig index 2d489186e945f3..f142a6637edee7 100644 --- a/arch/arm/configs/lpc18xx_defconfig +++ b/arch/arm/configs/lpc18xx_defconfig @@ -90,7 +90,6 @@ CONFIG_KEYBOARD_GPIO_POLLED=y # CONFIG_UNIX98_PTYS is not set # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_NONSTANDARD=y diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig index 9afccd76446b6b..b9e2e603cd95e4 100644 --- a/arch/arm/configs/lpc32xx_defconfig +++ b/arch/arm/configs/lpc32xx_defconfig @@ -113,7 +113,6 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_SOUND=y CONFIG_SND=y -# CONFIG_SND_SUPPORT_OLD_API is not set # CONFIG_SND_VERBOSE_PROCFS is not set CONFIG_SND_DEBUG=y CONFIG_SND_DEBUG_VERBOSE=y @@ -177,7 +176,6 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=y -CONFIG_CRYPTO_ANSI_CPRNG=y # CONFIG_CRYPTO_HW is not set CONFIG_PRINTK_TIME=y CONFIG_DYNAMIC_DEBUG=y diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig index f67e9cda73e24f..a9a212abfd69ad 100644 --- a/arch/arm/configs/mmp2_defconfig +++ b/arch/arm/configs/mmp2_defconfig @@ -78,4 +78,3 @@ CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y CONFIG_DEBUG_MMP_UART3=y CONFIG_EARLY_PRINTK=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 12f706e2ded541..7f1fa9dd88c92c 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -281,6 +281,8 @@ CONFIG_TI_CPSW_SWITCHDEV=y CONFIG_TI_CPTS=y CONFIG_TI_KEYSTONE_NETCP=y CONFIG_TI_KEYSTONE_NETCP_ETHSS=y +CONFIG_TI_PRUSS=m +CONFIG_TI_PRUETH=m CONFIG_XILINX_EMACLITE=y CONFIG_SFP=m CONFIG_BROADCOM_PHY=y diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig index 55f4ab67a30681..d3a26efe766c4c 100644 --- a/arch/arm/configs/mv78xx0_defconfig +++ b/arch/arm/configs/mv78xx0_defconfig @@ -121,4 +121,3 @@ CONFIG_DEBUG_KERNEL=y CONFIG_SCHEDSTATS=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 3b08c63b6de4f9..603fb003b22367 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -100,6 +100,8 @@ CONFIG_SND=y CONFIG_SND_SOC=y CONFIG_SND_MXS_SOC=y CONFIG_SND_SOC_MXS_SGTL5000=y +CONFIG_SND_SOC_TLV320AIC3X_I2C=y +CONFIG_SND_SIMPLE_CARD=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index 24c54bf1e2433e..df88763fc7c3d4 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -148,7 +148,6 @@ CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y -# CONFIG_SND_SUPPORT_OLD_API is not set # CONFIG_SND_VERBOSE_PROCFS is not set CONFIG_SND_DUMMY=y CONFIG_SND_USB_AUDIO=y @@ -220,7 +219,6 @@ CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_PCBC=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_LZO=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index c28426250ec3fc..002c9145026bc2 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -145,4 +145,3 @@ CONFIG_LATENCYTOP=y # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig index 4748c7d33cb8a9..8cbca84fe33a3c 100644 --- a/arch/arm/configs/pxa168_defconfig +++ b/arch/arm/configs/pxa168_defconfig @@ -48,4 +48,3 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_DEBUG_PREEMPT is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig index 381356faf38251..07d422f0ff348a 100644 --- a/arch/arm/configs/pxa3xx_defconfig +++ b/arch/arm/configs/pxa3xx_defconfig @@ -106,5 +106,4 @@ CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig index 49b59c600ae1c2..71ed0d73f8a94d 100644 --- a/arch/arm/configs/pxa910_defconfig +++ b/arch/arm/configs/pxa910_defconfig @@ -59,4 +59,3 @@ CONFIG_DEBUG_USER=y CONFIG_DEBUG_LL=y CONFIG_DEBUG_MMP_UART2=y CONFIG_EARLY_PRINTK=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index e4cb33b2bcee22..0085921833c3e8 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -10,7 +10,6 @@ CONFIG_KEXEC=y CONFIG_ARCH_RENESAS=y CONFIG_PL310_ERRATA_588369=y CONFIG_SMP=y -CONFIG_SCHED_MC=y CONFIG_NR_CPUS=8 CONFIG_HIGHMEM=y CONFIG_ARM_APPENDED_DTB=y @@ -24,6 +23,7 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y CONFIG_CPUFREQ_DT=y CONFIG_VFP=y CONFIG_NEON=y +# CONFIG_SCHED_SMT is not set # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_SLAB_FREELIST_HARDENED=y CONFIG_CMA=y @@ -75,7 +75,6 @@ CONFIG_INPUT_DA9063_ONKEY=y CONFIG_INPUT_ADXL34X=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set # CONFIG_SERIAL_8250_16550A_VARIANTS is not set CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_PCI is not set @@ -200,6 +199,7 @@ CONFIG_RZN1_DMAMUX=y CONFIG_RCAR_DMAC=y CONFIG_RENESAS_USB_DMAC=y CONFIG_RZ_DMAC=y +CONFIG_ARM_GT_INITIAL_PRESCALER_VAL=1 # CONFIG_IOMMU_SUPPORT is not set CONFIG_IIO=y CONFIG_AK8975=y @@ -218,6 +218,7 @@ CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_NFS_V4_1=y CONFIG_ROOT_NFS=y +# CONFIG_RPCSEC_GSS_KRB5 is not set CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_DMA_CMA=y diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index 395df2f9dc8ee0..c130af6d44d48e 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -228,7 +228,6 @@ CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index ab477ca13f8996..68aedaf92667a4 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -219,7 +219,6 @@ CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_LOGO=y CONFIG_SOUND=y CONFIG_SND=y -# CONFIG_SND_SUPPORT_OLD_API is not set # CONFIG_SND_DRIVERS is not set CONFIG_SND_HDA_TEGRA=y CONFIG_SND_HDA_INPUT_BEEP=y @@ -315,10 +314,6 @@ CONFIG_AK8975=y CONFIG_PWM=y CONFIG_PWM_TEGRA=y CONFIG_PHY_TEGRA_XUSB=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y diff --git a/arch/arm/crypto/Kconfig b/arch/arm/crypto/Kconfig index c436eec22d86ca..f30d743df26433 100644 --- a/arch/arm/crypto/Kconfig +++ b/arch/arm/crypto/Kconfig @@ -33,22 +33,6 @@ config CRYPTO_NHPOLY1305_NEON Architecture: arm using: - NEON (Advanced SIMD) extensions -config CRYPTO_BLAKE2B_NEON - tristate "Hash functions: BLAKE2b (NEON)" - depends on KERNEL_MODE_NEON - select CRYPTO_BLAKE2B - help - BLAKE2b cryptographic hash function (RFC 7693) - - Architecture: arm using - - NEON (Advanced SIMD) extensions - - BLAKE2b digest algorithm optimized with ARM NEON instructions. - On ARM processors that have NEON support but not the ARMv8 - Crypto Extensions, typically this BLAKE2b implementation is - much faster than the SHA-2 family and slightly faster than - SHA-1. - config CRYPTO_AES_ARM tristate "Ciphers: AES" select CRYPTO_ALGAPI diff --git a/arch/arm/crypto/Makefile b/arch/arm/crypto/Makefile index 6346a73effc06a..86dd43313dbfd1 100644 --- a/arch/arm/crypto/Makefile +++ b/arch/arm/crypto/Makefile @@ -5,7 +5,6 @@ obj-$(CONFIG_CRYPTO_AES_ARM) += aes-arm.o obj-$(CONFIG_CRYPTO_AES_ARM_BS) += aes-arm-bs.o -obj-$(CONFIG_CRYPTO_BLAKE2B_NEON) += blake2b-neon.o obj-$(CONFIG_CRYPTO_NHPOLY1305_NEON) += nhpoly1305-neon.o obj-$(CONFIG_CRYPTO_AES_ARM_CE) += aes-arm-ce.o @@ -13,7 +12,6 @@ obj-$(CONFIG_CRYPTO_GHASH_ARM_CE) += ghash-arm-ce.o aes-arm-y := aes-cipher-core.o aes-cipher-glue.o aes-arm-bs-y := aes-neonbs-core.o aes-neonbs-glue.o -blake2b-neon-y := blake2b-neon-core.o blake2b-neon-glue.o aes-arm-ce-y := aes-ce-core.o aes-ce-glue.o ghash-arm-ce-y := ghash-ce-core.o ghash-ce-glue.o nhpoly1305-neon-y := nh-neon-core.o nhpoly1305-neon-glue.o diff --git a/arch/arm/crypto/blake2b-neon-core.S b/arch/arm/crypto/blake2b-neon-core.S deleted file mode 100644 index 0406a186377fb4..00000000000000 --- a/arch/arm/crypto/blake2b-neon-core.S +++ /dev/null @@ -1,347 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * BLAKE2b digest algorithm, NEON accelerated - * - * Copyright 2020 Google LLC - * - * Author: Eric Biggers - */ - -#include - - .text - .fpu neon - - // The arguments to blake2b_compress_neon() - STATE .req r0 - BLOCK .req r1 - NBLOCKS .req r2 - INC .req r3 - - // Pointers to the rotation tables - ROR24_TABLE .req r4 - ROR16_TABLE .req r5 - - // The original stack pointer - ORIG_SP .req r6 - - // NEON registers which contain the message words of the current block. - // M_0-M_3 are occasionally used for other purposes too. - M_0 .req d16 - M_1 .req d17 - M_2 .req d18 - M_3 .req d19 - M_4 .req d20 - M_5 .req d21 - M_6 .req d22 - M_7 .req d23 - M_8 .req d24 - M_9 .req d25 - M_10 .req d26 - M_11 .req d27 - M_12 .req d28 - M_13 .req d29 - M_14 .req d30 - M_15 .req d31 - - .align 4 - // Tables for computing ror64(x, 24) and ror64(x, 16) using the vtbl.8 - // instruction. This is the most efficient way to implement these - // rotation amounts with NEON. (On Cortex-A53 it's the same speed as - // vshr.u64 + vsli.u64, while on Cortex-A7 it's faster.) -.Lror24_table: - .byte 3, 4, 5, 6, 7, 0, 1, 2 -.Lror16_table: - .byte 2, 3, 4, 5, 6, 7, 0, 1 - // The BLAKE2b initialization vector -.Lblake2b_IV: - .quad 0x6a09e667f3bcc908, 0xbb67ae8584caa73b - .quad 0x3c6ef372fe94f82b, 0xa54ff53a5f1d36f1 - .quad 0x510e527fade682d1, 0x9b05688c2b3e6c1f - .quad 0x1f83d9abfb41bd6b, 0x5be0cd19137e2179 - -// Execute one round of BLAKE2b by updating the state matrix v[0..15] in the -// NEON registers q0-q7. The message block is in q8..q15 (M_0-M_15). The stack -// pointer points to a 32-byte aligned buffer containing a copy of q8 and q9 -// (M_0-M_3), so that they can be reloaded if they are used as temporary -// registers. The macro arguments s0-s15 give the order in which the message -// words are used in this round. 'final' is 1 if this is the final round. -.macro _blake2b_round s0, s1, s2, s3, s4, s5, s6, s7, \ - s8, s9, s10, s11, s12, s13, s14, s15, final=0 - - // Mix the columns: - // (v[0], v[4], v[8], v[12]), (v[1], v[5], v[9], v[13]), - // (v[2], v[6], v[10], v[14]), and (v[3], v[7], v[11], v[15]). - - // a += b + m[blake2b_sigma[r][2*i + 0]]; - vadd.u64 q0, q0, q2 - vadd.u64 q1, q1, q3 - vadd.u64 d0, d0, M_\s0 - vadd.u64 d1, d1, M_\s2 - vadd.u64 d2, d2, M_\s4 - vadd.u64 d3, d3, M_\s6 - - // d = ror64(d ^ a, 32); - veor q6, q6, q0 - veor q7, q7, q1 - vrev64.32 q6, q6 - vrev64.32 q7, q7 - - // c += d; - vadd.u64 q4, q4, q6 - vadd.u64 q5, q5, q7 - - // b = ror64(b ^ c, 24); - vld1.8 {M_0}, [ROR24_TABLE, :64] - veor q2, q2, q4 - veor q3, q3, q5 - vtbl.8 d4, {d4}, M_0 - vtbl.8 d5, {d5}, M_0 - vtbl.8 d6, {d6}, M_0 - vtbl.8 d7, {d7}, M_0 - - // a += b + m[blake2b_sigma[r][2*i + 1]]; - // - // M_0 got clobbered above, so we have to reload it if any of the four - // message words this step needs happens to be M_0. Otherwise we don't - // need to reload it here, as it will just get clobbered again below. -.if \s1 == 0 || \s3 == 0 || \s5 == 0 || \s7 == 0 - vld1.8 {M_0}, [sp, :64] -.endif - vadd.u64 q0, q0, q2 - vadd.u64 q1, q1, q3 - vadd.u64 d0, d0, M_\s1 - vadd.u64 d1, d1, M_\s3 - vadd.u64 d2, d2, M_\s5 - vadd.u64 d3, d3, M_\s7 - - // d = ror64(d ^ a, 16); - vld1.8 {M_0}, [ROR16_TABLE, :64] - veor q6, q6, q0 - veor q7, q7, q1 - vtbl.8 d12, {d12}, M_0 - vtbl.8 d13, {d13}, M_0 - vtbl.8 d14, {d14}, M_0 - vtbl.8 d15, {d15}, M_0 - - // c += d; - vadd.u64 q4, q4, q6 - vadd.u64 q5, q5, q7 - - // b = ror64(b ^ c, 63); - // - // This rotation amount isn't a multiple of 8, so it has to be - // implemented using a pair of shifts, which requires temporary - // registers. Use q8-q9 (M_0-M_3) for this, and reload them afterwards. - veor q8, q2, q4 - veor q9, q3, q5 - vshr.u64 q2, q8, #63 - vshr.u64 q3, q9, #63 - vsli.u64 q2, q8, #1 - vsli.u64 q3, q9, #1 - vld1.8 {q8-q9}, [sp, :256] - - // Mix the diagonals: - // (v[0], v[5], v[10], v[15]), (v[1], v[6], v[11], v[12]), - // (v[2], v[7], v[8], v[13]), and (v[3], v[4], v[9], v[14]). - // - // There are two possible ways to do this: use 'vext' instructions to - // shift the rows of the matrix so that the diagonals become columns, - // and undo it afterwards; or just use 64-bit operations on 'd' - // registers instead of 128-bit operations on 'q' registers. We use the - // latter approach, as it performs much better on Cortex-A7. - - // a += b + m[blake2b_sigma[r][2*i + 0]]; - vadd.u64 d0, d0, d5 - vadd.u64 d1, d1, d6 - vadd.u64 d2, d2, d7 - vadd.u64 d3, d3, d4 - vadd.u64 d0, d0, M_\s8 - vadd.u64 d1, d1, M_\s10 - vadd.u64 d2, d2, M_\s12 - vadd.u64 d3, d3, M_\s14 - - // d = ror64(d ^ a, 32); - veor d15, d15, d0 - veor d12, d12, d1 - veor d13, d13, d2 - veor d14, d14, d3 - vrev64.32 d15, d15 - vrev64.32 d12, d12 - vrev64.32 d13, d13 - vrev64.32 d14, d14 - - // c += d; - vadd.u64 d10, d10, d15 - vadd.u64 d11, d11, d12 - vadd.u64 d8, d8, d13 - vadd.u64 d9, d9, d14 - - // b = ror64(b ^ c, 24); - vld1.8 {M_0}, [ROR24_TABLE, :64] - veor d5, d5, d10 - veor d6, d6, d11 - veor d7, d7, d8 - veor d4, d4, d9 - vtbl.8 d5, {d5}, M_0 - vtbl.8 d6, {d6}, M_0 - vtbl.8 d7, {d7}, M_0 - vtbl.8 d4, {d4}, M_0 - - // a += b + m[blake2b_sigma[r][2*i + 1]]; -.if \s9 == 0 || \s11 == 0 || \s13 == 0 || \s15 == 0 - vld1.8 {M_0}, [sp, :64] -.endif - vadd.u64 d0, d0, d5 - vadd.u64 d1, d1, d6 - vadd.u64 d2, d2, d7 - vadd.u64 d3, d3, d4 - vadd.u64 d0, d0, M_\s9 - vadd.u64 d1, d1, M_\s11 - vadd.u64 d2, d2, M_\s13 - vadd.u64 d3, d3, M_\s15 - - // d = ror64(d ^ a, 16); - vld1.8 {M_0}, [ROR16_TABLE, :64] - veor d15, d15, d0 - veor d12, d12, d1 - veor d13, d13, d2 - veor d14, d14, d3 - vtbl.8 d12, {d12}, M_0 - vtbl.8 d13, {d13}, M_0 - vtbl.8 d14, {d14}, M_0 - vtbl.8 d15, {d15}, M_0 - - // c += d; - vadd.u64 d10, d10, d15 - vadd.u64 d11, d11, d12 - vadd.u64 d8, d8, d13 - vadd.u64 d9, d9, d14 - - // b = ror64(b ^ c, 63); - veor d16, d4, d9 - veor d17, d5, d10 - veor d18, d6, d11 - veor d19, d7, d8 - vshr.u64 q2, q8, #63 - vshr.u64 q3, q9, #63 - vsli.u64 q2, q8, #1 - vsli.u64 q3, q9, #1 - // Reloading q8-q9 can be skipped on the final round. -.if ! \final - vld1.8 {q8-q9}, [sp, :256] -.endif -.endm - -// -// void blake2b_compress_neon(struct blake2b_state *state, -// const u8 *block, size_t nblocks, u32 inc); -// -// Only the first three fields of struct blake2b_state are used: -// u64 h[8]; (inout) -// u64 t[2]; (inout) -// u64 f[2]; (in) -// - .align 5 -ENTRY(blake2b_compress_neon) - push {r4-r10} - - // Allocate a 32-byte stack buffer that is 32-byte aligned. - mov ORIG_SP, sp - sub ip, sp, #32 - bic ip, ip, #31 - mov sp, ip - - adr ROR24_TABLE, .Lror24_table - adr ROR16_TABLE, .Lror16_table - - mov ip, STATE - vld1.64 {q0-q1}, [ip]! // Load h[0..3] - vld1.64 {q2-q3}, [ip]! // Load h[4..7] -.Lnext_block: - adr r10, .Lblake2b_IV - vld1.64 {q14-q15}, [ip] // Load t[0..1] and f[0..1] - vld1.64 {q4-q5}, [r10]! // Load IV[0..3] - vmov r7, r8, d28 // Copy t[0] to (r7, r8) - vld1.64 {q6-q7}, [r10] // Load IV[4..7] - adds r7, r7, INC // Increment counter - bcs .Lslow_inc_ctr - vmov.i32 d28[0], r7 - vst1.64 {d28}, [ip] // Update t[0] -.Linc_ctr_done: - - // Load the next message block and finish initializing the state matrix - // 'v'. Fortunately, there are exactly enough NEON registers to fit the - // entire state matrix in q0-q7 and the entire message block in q8-15. - // - // However, _blake2b_round also needs some extra registers for rotates, - // so we have to spill some registers. It's better to spill the message - // registers than the state registers, as the message doesn't change. - // Therefore we store a copy of the first 32 bytes of the message block - // (q8-q9) in an aligned buffer on the stack so that they can be - // reloaded when needed. (We could just reload directly from the - // message buffer, but it's faster to use aligned loads.) - vld1.8 {q8-q9}, [BLOCK]! - veor q6, q6, q14 // v[12..13] = IV[4..5] ^ t[0..1] - vld1.8 {q10-q11}, [BLOCK]! - veor q7, q7, q15 // v[14..15] = IV[6..7] ^ f[0..1] - vld1.8 {q12-q13}, [BLOCK]! - vst1.8 {q8-q9}, [sp, :256] - mov ip, STATE - vld1.8 {q14-q15}, [BLOCK]! - - // Execute the rounds. Each round is provided the order in which it - // needs to use the message words. - _blake2b_round 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 - _blake2b_round 14, 10, 4, 8, 9, 15, 13, 6, 1, 12, 0, 2, 11, 7, 5, 3 - _blake2b_round 11, 8, 12, 0, 5, 2, 15, 13, 10, 14, 3, 6, 7, 1, 9, 4 - _blake2b_round 7, 9, 3, 1, 13, 12, 11, 14, 2, 6, 5, 10, 4, 0, 15, 8 - _blake2b_round 9, 0, 5, 7, 2, 4, 10, 15, 14, 1, 11, 12, 6, 8, 3, 13 - _blake2b_round 2, 12, 6, 10, 0, 11, 8, 3, 4, 13, 7, 5, 15, 14, 1, 9 - _blake2b_round 12, 5, 1, 15, 14, 13, 4, 10, 0, 7, 6, 3, 9, 2, 8, 11 - _blake2b_round 13, 11, 7, 14, 12, 1, 3, 9, 5, 0, 15, 4, 8, 6, 2, 10 - _blake2b_round 6, 15, 14, 9, 11, 3, 0, 8, 12, 2, 13, 7, 1, 4, 10, 5 - _blake2b_round 10, 2, 8, 4, 7, 6, 1, 5, 15, 11, 9, 14, 3, 12, 13, 0 - _blake2b_round 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 - _blake2b_round 14, 10, 4, 8, 9, 15, 13, 6, 1, 12, 0, 2, 11, 7, 5, 3 \ - final=1 - - // Fold the final state matrix into the hash chaining value: - // - // for (i = 0; i < 8; i++) - // h[i] ^= v[i] ^ v[i + 8]; - // - vld1.64 {q8-q9}, [ip]! // Load old h[0..3] - veor q0, q0, q4 // v[0..1] ^= v[8..9] - veor q1, q1, q5 // v[2..3] ^= v[10..11] - vld1.64 {q10-q11}, [ip] // Load old h[4..7] - veor q2, q2, q6 // v[4..5] ^= v[12..13] - veor q3, q3, q7 // v[6..7] ^= v[14..15] - veor q0, q0, q8 // v[0..1] ^= h[0..1] - veor q1, q1, q9 // v[2..3] ^= h[2..3] - mov ip, STATE - subs NBLOCKS, NBLOCKS, #1 // nblocks-- - vst1.64 {q0-q1}, [ip]! // Store new h[0..3] - veor q2, q2, q10 // v[4..5] ^= h[4..5] - veor q3, q3, q11 // v[6..7] ^= h[6..7] - vst1.64 {q2-q3}, [ip]! // Store new h[4..7] - - // Advance to the next block, if there is one. - bne .Lnext_block // nblocks != 0? - - mov sp, ORIG_SP - pop {r4-r10} - mov pc, lr - -.Lslow_inc_ctr: - // Handle the case where the counter overflowed its low 32 bits, by - // carrying the overflow bit into the full 128-bit counter. - vmov r9, r10, d29 - adcs r8, r8, #0 - adcs r9, r9, #0 - adc r10, r10, #0 - vmov d28, r7, r8 - vmov d29, r9, r10 - vst1.64 {q14}, [ip] // Update t[0] and t[1] - b .Linc_ctr_done -ENDPROC(blake2b_compress_neon) diff --git a/arch/arm/crypto/blake2b-neon-glue.c b/arch/arm/crypto/blake2b-neon-glue.c deleted file mode 100644 index 2ff443a91724f5..00000000000000 --- a/arch/arm/crypto/blake2b-neon-glue.c +++ /dev/null @@ -1,104 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * BLAKE2b digest algorithm, NEON accelerated - * - * Copyright 2020 Google LLC - */ - -#include -#include - -#include -#include - -#include -#include - -asmlinkage void blake2b_compress_neon(struct blake2b_state *state, - const u8 *block, size_t nblocks, u32 inc); - -static void blake2b_compress_arch(struct blake2b_state *state, - const u8 *block, size_t nblocks, u32 inc) -{ - do { - const size_t blocks = min_t(size_t, nblocks, - SZ_4K / BLAKE2B_BLOCK_SIZE); - - kernel_neon_begin(); - blake2b_compress_neon(state, block, blocks, inc); - kernel_neon_end(); - - nblocks -= blocks; - block += blocks * BLAKE2B_BLOCK_SIZE; - } while (nblocks); -} - -static int crypto_blake2b_update_neon(struct shash_desc *desc, - const u8 *in, unsigned int inlen) -{ - return crypto_blake2b_update_bo(desc, in, inlen, blake2b_compress_arch); -} - -static int crypto_blake2b_finup_neon(struct shash_desc *desc, const u8 *in, - unsigned int inlen, u8 *out) -{ - return crypto_blake2b_finup(desc, in, inlen, out, - blake2b_compress_arch); -} - -#define BLAKE2B_ALG(name, driver_name, digest_size) \ - { \ - .base.cra_name = name, \ - .base.cra_driver_name = driver_name, \ - .base.cra_priority = 200, \ - .base.cra_flags = CRYPTO_ALG_OPTIONAL_KEY | \ - CRYPTO_AHASH_ALG_BLOCK_ONLY | \ - CRYPTO_AHASH_ALG_FINAL_NONZERO, \ - .base.cra_blocksize = BLAKE2B_BLOCK_SIZE, \ - .base.cra_ctxsize = sizeof(struct blake2b_tfm_ctx), \ - .base.cra_module = THIS_MODULE, \ - .digestsize = digest_size, \ - .setkey = crypto_blake2b_setkey, \ - .init = crypto_blake2b_init, \ - .update = crypto_blake2b_update_neon, \ - .finup = crypto_blake2b_finup_neon, \ - .descsize = sizeof(struct blake2b_state), \ - .statesize = BLAKE2B_STATE_SIZE, \ - } - -static struct shash_alg blake2b_neon_algs[] = { - BLAKE2B_ALG("blake2b-160", "blake2b-160-neon", BLAKE2B_160_HASH_SIZE), - BLAKE2B_ALG("blake2b-256", "blake2b-256-neon", BLAKE2B_256_HASH_SIZE), - BLAKE2B_ALG("blake2b-384", "blake2b-384-neon", BLAKE2B_384_HASH_SIZE), - BLAKE2B_ALG("blake2b-512", "blake2b-512-neon", BLAKE2B_512_HASH_SIZE), -}; - -static int __init blake2b_neon_mod_init(void) -{ - if (!(elf_hwcap & HWCAP_NEON)) - return -ENODEV; - - return crypto_register_shashes(blake2b_neon_algs, - ARRAY_SIZE(blake2b_neon_algs)); -} - -static void __exit blake2b_neon_mod_exit(void) -{ - crypto_unregister_shashes(blake2b_neon_algs, - ARRAY_SIZE(blake2b_neon_algs)); -} - -module_init(blake2b_neon_mod_init); -module_exit(blake2b_neon_mod_exit); - -MODULE_DESCRIPTION("BLAKE2b digest algorithm, NEON accelerated"); -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Eric Biggers "); -MODULE_ALIAS_CRYPTO("blake2b-160"); -MODULE_ALIAS_CRYPTO("blake2b-160-neon"); -MODULE_ALIAS_CRYPTO("blake2b-256"); -MODULE_ALIAS_CRYPTO("blake2b-256-neon"); -MODULE_ALIAS_CRYPTO("blake2b-384"); -MODULE_ALIAS_CRYPTO("blake2b-384-neon"); -MODULE_ALIAS_CRYPTO("blake2b-512"); -MODULE_ALIAS_CRYPTO("blake2b-512-neon"); diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h index a815f39b424390..90b6a832108ddd 100644 --- a/arch/arm/include/asm/hardware/sa1111.h +++ b/arch/arm/include/asm/hardware/sa1111.h @@ -368,7 +368,7 @@ -extern struct bus_type sa1111_bus_type; +extern const struct bus_type sa1111_bus_type; #define SA1111_DEVID_SBI (1 << 0) #define SA1111_DEVID_SK (1 << 1) diff --git a/arch/arm/include/asm/simd.h b/arch/arm/include/asm/simd.h index be08a8da046f92..8549fa8b7253bd 100644 --- a/arch/arm/include/asm/simd.h +++ b/arch/arm/include/asm/simd.h @@ -2,14 +2,21 @@ #ifndef _ASM_SIMD_H #define _ASM_SIMD_H +#include #include #include #include +#include + static __must_check inline bool may_use_simd(void) { return IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && !in_hardirq() && !irqs_disabled(); } +DEFINE_LOCK_GUARD_0(ksimd, kernel_neon_begin(), kernel_neon_end()) + +#define scoped_ksimd() scoped_guard(ksimd) + #endif /* _ASM_SIMD_H */ diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index f90be312418e87..d6ae80b5df36f6 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -283,10 +283,17 @@ extern int __put_user_8(void *, unsigned long long); __gu_err; \ }) +/* + * This is a type: either unsigned long, if the argument fits into + * that type, or otherwise unsigned long long. + */ +#define __long_type(x) \ + __typeof__(__builtin_choose_expr(sizeof(x) > sizeof(0UL), 0ULL, 0UL)) + #define __get_user_err(x, ptr, err, __t) \ do { \ unsigned long __gu_addr = (unsigned long)(ptr); \ - unsigned long __gu_val; \ + __long_type(x) __gu_val; \ unsigned int __ua_flags; \ __chk_user_ptr(ptr); \ might_fault(); \ @@ -295,6 +302,7 @@ do { \ case 1: __get_user_asm_byte(__gu_val, __gu_addr, err, __t); break; \ case 2: __get_user_asm_half(__gu_val, __gu_addr, err, __t); break; \ case 4: __get_user_asm_word(__gu_val, __gu_addr, err, __t); break; \ + case 8: __get_user_asm_dword(__gu_val, __gu_addr, err, __t); break; \ default: (__gu_val) = __get_user_bad(); \ } \ uaccess_restore(__ua_flags); \ @@ -353,6 +361,22 @@ do { \ #define __get_user_asm_word(x, addr, err, __t) \ __get_user_asm(x, addr, err, "ldr" __t) +#ifdef __ARMEB__ +#define __WORD0_OFFS 4 +#define __WORD1_OFFS 0 +#else +#define __WORD0_OFFS 0 +#define __WORD1_OFFS 4 +#endif + +#define __get_user_asm_dword(x, addr, err, __t) \ + ({ \ + unsigned long __w0, __w1; \ + __get_user_asm(__w0, addr + __WORD0_OFFS, err, "ldr" __t); \ + __get_user_asm(__w1, addr + __WORD1_OFFS, err, "ldr" __t); \ + (x) = ((u64)__w1 << 32) | (u64) __w0; \ +}) + #define __put_user_switch(x, ptr, __err, __fn) \ do { \ const __typeof__(*(ptr)) __user *__pu_ptr = (ptr); \ diff --git a/arch/arm/include/asm/word-at-a-time.h b/arch/arm/include/asm/word-at-a-time.h index f9a3897b06e7ff..5023f98d8293d5 100644 --- a/arch/arm/include/asm/word-at-a-time.h +++ b/arch/arm/include/asm/word-at-a-time.h @@ -67,7 +67,7 @@ static inline unsigned long find_zero(unsigned long mask) */ static inline unsigned long load_unaligned_zeropad(const void *addr) { - unsigned long ret, offset; + unsigned long ret, tmp; /* Load word from unaligned pointer addr */ asm( @@ -75,9 +75,9 @@ static inline unsigned long load_unaligned_zeropad(const void *addr) "2:\n" " .pushsection .text.fixup,\"ax\"\n" " .align 2\n" - "3: and %1, %2, #0x3\n" - " bic %2, %2, #0x3\n" - " ldr %0, [%2]\n" + "3: bic %1, %2, #0x3\n" + " ldr %0, [%1]\n" + " and %1, %2, #0x3\n" " lsl %1, %1, #0x3\n" #ifndef __ARMEB__ " lsr %0, %0, %1\n" @@ -90,7 +90,7 @@ static inline unsigned long load_unaligned_zeropad(const void *addr) " .align 3\n" " .long 1b, 3b\n" " .popsection" - : "=&r" (ret), "=&r" (offset) + : "=&r" (ret), "=&r" (tmp) : "r" (addr), "Qo" (*(unsigned long *)addr)); return ret; diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c index fd0dbeb93357db..cb7d8a7b14e0d9 100644 --- a/arch/arm/mach-exynos/mcpm-exynos.c +++ b/arch/arm/mach-exynos/mcpm-exynos.c @@ -215,7 +215,7 @@ static const struct of_device_id exynos_dt_mcpm_match[] = { {}, }; -static void exynos_mcpm_setup_entry_point(void) +static void exynos_mcpm_setup_entry_point(void *data) { /* * U-Boot SPL is hardcoded to jump to the start of ns_sram_base_addr @@ -228,10 +228,14 @@ static void exynos_mcpm_setup_entry_point(void) __raw_writel(__pa_symbol(mcpm_entry_point), ns_sram_base_addr + 8); } -static struct syscore_ops exynos_mcpm_syscore_ops = { +static const struct syscore_ops exynos_mcpm_syscore_ops = { .resume = exynos_mcpm_setup_entry_point, }; +static struct syscore exynos_mcpm_syscore = { + .ops = &exynos_mcpm_syscore_ops, +}; + static int __init exynos_mcpm_init(void) { struct device_node *node; @@ -300,9 +304,9 @@ static int __init exynos_mcpm_init(void) pmu_raw_writel(value, EXYNOS_COMMON_OPTION(i)); } - exynos_mcpm_setup_entry_point(); + exynos_mcpm_setup_entry_point(NULL); - register_syscore_ops(&exynos_mcpm_syscore_ops); + register_syscore(&exynos_mcpm_syscore); return ret; } diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index 150a1e56dcae92..22d723553f6276 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -53,9 +53,9 @@ struct exynos_pm_data { void (*pm_prepare)(void); void (*pm_resume_prepare)(void); - void (*pm_resume)(void); - int (*pm_suspend)(void); int (*cpu_suspend)(unsigned long); + + const struct syscore_ops *syscore_ops; }; /* Used only on Exynos542x/5800 */ @@ -376,7 +376,7 @@ static void exynos5420_pm_prepare(void) } -static int exynos_pm_suspend(void) +static int exynos_pm_suspend(void *data) { exynos_pm_central_suspend(); @@ -390,7 +390,7 @@ static int exynos_pm_suspend(void) return 0; } -static int exynos5420_pm_suspend(void) +static int exynos5420_pm_suspend(void *data) { u32 this_cluster; @@ -408,7 +408,7 @@ static int exynos5420_pm_suspend(void) return 0; } -static void exynos_pm_resume(void) +static void exynos_pm_resume(void *data) { u32 cpuid = read_cpuid_part(); @@ -429,7 +429,7 @@ static void exynos_pm_resume(void) exynos_set_delayed_reset_assertion(true); } -static void exynos3250_pm_resume(void) +static void exynos3250_pm_resume(void *data) { u32 cpuid = read_cpuid_part(); @@ -473,7 +473,7 @@ static void exynos5420_prepare_pm_resume(void) } } -static void exynos5420_pm_resume(void) +static void exynos5420_pm_resume(void *data) { unsigned long tmp; @@ -596,41 +596,52 @@ static const struct platform_suspend_ops exynos_suspend_ops = { .valid = suspend_valid_only_mem, }; +static const struct syscore_ops exynos3250_syscore_ops = { + .suspend = exynos_pm_suspend, + .resume = exynos3250_pm_resume, +}; + static const struct exynos_pm_data exynos3250_pm_data = { .wkup_irq = exynos3250_wkup_irq, .wake_disable_mask = ((0xFF << 8) | (0x1F << 1)), - .pm_suspend = exynos_pm_suspend, - .pm_resume = exynos3250_pm_resume, .pm_prepare = exynos3250_pm_prepare, .cpu_suspend = exynos3250_cpu_suspend, + .syscore_ops = &exynos3250_syscore_ops, +}; + +static const struct syscore_ops exynos_syscore_ops = { + .suspend = exynos_pm_suspend, + .resume = exynos_pm_resume, }; static const struct exynos_pm_data exynos4_pm_data = { .wkup_irq = exynos4_wkup_irq, .wake_disable_mask = ((0xFF << 8) | (0x1F << 1)), - .pm_suspend = exynos_pm_suspend, - .pm_resume = exynos_pm_resume, .pm_prepare = exynos_pm_prepare, .cpu_suspend = exynos_cpu_suspend, + .syscore_ops = &exynos_syscore_ops, }; static const struct exynos_pm_data exynos5250_pm_data = { .wkup_irq = exynos5250_wkup_irq, .wake_disable_mask = ((0xFF << 8) | (0x1F << 1)), - .pm_suspend = exynos_pm_suspend, - .pm_resume = exynos_pm_resume, .pm_prepare = exynos_pm_prepare, .cpu_suspend = exynos_cpu_suspend, + .syscore_ops = &exynos_syscore_ops, +}; + +static const struct syscore_ops exynos5420_syscore_ops = { + .resume = exynos5420_pm_resume, + .suspend = exynos5420_pm_suspend, }; static const struct exynos_pm_data exynos5420_pm_data = { .wkup_irq = exynos5250_wkup_irq, .wake_disable_mask = (0x7F << 7) | (0x1F << 1), .pm_resume_prepare = exynos5420_prepare_pm_resume, - .pm_resume = exynos5420_pm_resume, - .pm_suspend = exynos5420_pm_suspend, .pm_prepare = exynos5420_pm_prepare, .cpu_suspend = exynos5420_cpu_suspend, + .syscore_ops = &exynos5420_syscore_ops, }; static const struct of_device_id exynos_pmu_of_device_ids[] __initconst = { @@ -656,7 +667,7 @@ static const struct of_device_id exynos_pmu_of_device_ids[] __initconst = { { /*sentinel*/ }, }; -static struct syscore_ops exynos_pm_syscore_ops; +static struct syscore exynos_pm_syscore; void __init exynos_pm_init(void) { @@ -684,10 +695,9 @@ void __init exynos_pm_init(void) tmp |= pm_data->wake_disable_mask; pmu_raw_writel(tmp, S5P_WAKEUP_MASK); - exynos_pm_syscore_ops.suspend = pm_data->pm_suspend; - exynos_pm_syscore_ops.resume = pm_data->pm_resume; + exynos_pm_syscore.ops = pm_data->syscore_ops; - register_syscore_ops(&exynos_pm_syscore_ops); + register_syscore(&exynos_pm_syscore); suspend_set_ops(&exynos_suspend_ops); /* diff --git a/arch/arm/mach-gemini/board-dt.c b/arch/arm/mach-gemini/board-dt.c index fbafe7475c028d..2bba617e4d54aa 100644 --- a/arch/arm/mach-gemini/board-dt.c +++ b/arch/arm/mach-gemini/board-dt.c @@ -34,7 +34,7 @@ static void gemini_idle(void) { /* * Because of broken hardware we have to enable interrupts or the CPU - * will never wakeup... Acctualy it is not very good to enable + * will never wakeup... Actually it is not very good to enable * interrupts first since scheduler can miss a tick, but there is * no other way around this. Platforms that needs it for power saving * should enable it in init code, since by default it is diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig index 638eabad2dd37e..64ec487c13abd8 100644 --- a/arch/arm/mach-mediatek/Kconfig +++ b/arch/arm/mach-mediatek/Kconfig @@ -19,6 +19,10 @@ config MACH_MT6572 bool "MediaTek MT6572 SoCs support" default ARCH_MEDIATEK +config MACH_MT6582 + bool "MediaTek MT6582 SoCs support" + default ARCH_MEDIATEK + config MACH_MT6589 bool "MediaTek MT6589 SoCs support" default ARCH_MEDIATEK diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c index 5c28124bd0078b..fd3a8834fc4fd4 100644 --- a/arch/arm/mach-mediatek/mediatek.c +++ b/arch/arm/mach-mediatek/mediatek.c @@ -39,6 +39,7 @@ static void __init mediatek_timer_init(void) static const char * const mediatek_board_dt_compat[] = { "mediatek,mt2701", "mediatek,mt6572", + "mediatek,mt6582", "mediatek,mt6589", "mediatek,mt6592", "mediatek,mt7623", diff --git a/arch/arm/mach-mediatek/platsmp.c b/arch/arm/mach-mediatek/platsmp.c index bbd26d423bdef2..6b0943d95555af 100644 --- a/arch/arm/mach-mediatek/platsmp.c +++ b/arch/arm/mach-mediatek/platsmp.c @@ -56,6 +56,7 @@ static const struct of_device_id mtk_tz_smp_boot_infos[] __initconst = { static const struct of_device_id mtk_smp_boot_infos[] __initconst = { { .compatible = "mediatek,mt6572", .data = &mtk_mt6572_boot }, + { .compatible = "mediatek,mt6582", .data = &mtk_mt7623_boot }, { .compatible = "mediatek,mt6589", .data = &mtk_mt6589_boot }, { .compatible = "mediatek,mt7623", .data = &mtk_mt7623_boot }, { .compatible = "mediatek,mt7629", .data = &mtk_mt7623_boot }, diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S index 35c2f9574dbd56..5cf6fcca602ce9 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S +++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -97,7 +97,7 @@ ENTRY(qwerty_fiqin_start) ldr r13, [r12, #IRQ_ITR_REG_OFFSET] @ fetch interrupts status bics r13, r13, r11 @ clear masked - any left? - beq exit @ none - spurious FIQ? exit + beq .Lexit @ none - spurious FIQ? exit ldr r10, [r12, #IRQ_SIR_FIQ_REG_OFFSET] @ get requested interrupt number @@ -105,25 +105,25 @@ ENTRY(qwerty_fiqin_start) str r8, [r12, #IRQ_CONTROL_REG_OFFSET] cmp r10, #(INT_GPIO_BANK1 - NR_IRQS_LEGACY) @ is it GPIO interrupt? - beq gpio @ yes - process it + beq .Lgpio @ yes - process it mov r8, #1 orr r8, r11, r8, lsl r10 @ mask spurious interrupt str r8, [r12, #IRQ_MIR_REG_OFFSET] -exit: +.Lexit: subs pc, lr, #4 @ return from FIQ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @@@@@@@@@@@@@@@@@@@@@@@@@@@ -gpio: @ GPIO bank interrupt handler +.Lgpio: @ GPIO bank interrupt handler ldr r12, omap1510_gpio_base @ set base pointer to GPIO bank ldr r11, [r12, #OMAP1510_GPIO_INT_MASK] @ fetch GPIO interrupts mask -restart: +.Lrestart: ldr r13, [r12, #OMAP1510_GPIO_INT_STATUS] @ fetch status bits bics r13, r13, r11 @ clear masked - any left? - beq exit @ no - spurious interrupt? exit + beq .Lexit @ no - spurious interrupt? exit orr r11, r11, r13 @ mask all requested interrupts str r11, [r12, #OMAP1510_GPIO_INT_MASK] @@ -131,7 +131,7 @@ restart: str r13, [r12, #OMAP1510_GPIO_INT_STATUS] @ ack all requested interrupts ands r10, r13, #KEYBRD_CLK_MASK @ extract keyboard status - set? - beq hksw @ no - try next source + beq .Lhksw @ no - try next source @@@@@@@@@@@@@@@@@@@@@@ @@ -145,10 +145,10 @@ restart: ldr r10, [r9, #BUF_STATE] @ fetch kbd interface state cmp r10, #0 @ are we expecting start bit? - bne data @ no - go to data processing + bne .Ldata @ no - go to data processing ands r8, r8, #KEYBRD_DATA_MASK @ check start bit - detected? - beq hksw @ no - try next source + beq .Lhksw @ no - try next source @ r8 contains KEYBRD_DATA_MASK, use it str r8, [r9, #BUF_STATE] @ enter data processing state @@ -162,9 +162,9 @@ restart: mvn r11, #KEYBRD_CLK_MASK @ prepare all except kbd mask str r11, [r12, #OMAP1510_GPIO_INT_MASK] @ store into the mask register - b restart @ restart + b .Lrestart @ restart -data: ldr r10, [r9, #BUF_MASK] @ fetch current input bit mask +.Ldata: ldr r10, [r9, #BUF_MASK] @ fetch current input bit mask @ r8 still contains GPIO input bits ands r8, r8, #KEYBRD_DATA_MASK @ is keyboard data line low? @@ -175,7 +175,7 @@ data: ldr r10, [r9, #BUF_MASK] @ fetch current input bit mask mov r10, r10, lsl #1 @ shift mask left bics r10, r10, #0x800 @ have we got all the bits? strne r10, [r9, #BUF_MASK] @ not yet - store the mask - bne restart @ and restart + bne .Lrestart @ and restart @ r10 already contains 0, reuse it str r10, [r9, #BUF_STATE] @ reset state to start @@ -189,7 +189,7 @@ data: ldr r10, [r9, #BUF_MASK] @ fetch current input bit mask ldr r10, [r9, #BUF_KEYS_CNT] @ get saved keystrokes count ldr r8, [r9, #BUF_BUF_LEN] @ get buffer size cmp r10, r8 @ is buffer full? - beq hksw @ yes - key lost, next source + beq .Lhksw @ yes - key lost, next source add r10, r10, #1 @ incremet keystrokes counter str r10, [r9, #BUF_KEYS_CNT] @@ -213,9 +213,9 @@ data: ldr r10, [r9, #BUF_MASK] @ fetch current input bit mask @@@@@@@@@@@@@@@@@@@@@@@@ -hksw: @Is hook switch interrupt requested? +.Lhksw: @Is hook switch interrupt requested? tst r13, #HOOK_SWITCH_MASK @ is hook switch status bit set? - beq mdm @ no - try next source + beq .Lmdm @ no - try next source @@@@@@@@@@@@@@@@@@@@@@@@ @@ -230,9 +230,9 @@ hksw: @Is hook switch interrupt requested? @@@@@@@@@@@@@@@@@@@@@@@@ -mdm: @Is it a modem interrupt? +.Lmdm: @Is it a modem interrupt? tst r13, #MODEM_IRQ_MASK @ is modem status bit set? - beq irq @ no - check for next interrupt + beq .Lirq @ no - check for next interrupt @@@@@@@@@@@@@@@@@@@@@@@@ @@ -245,13 +245,13 @@ mdm: @Is it a modem interrupt? @@@@@@@@@@@@@@@@@@@@@@@@ -irq: @ Place deferred_fiq interrupt request +.Lirq: @ Place deferred_fiq interrupt request ldr r12, deferred_fiq_ih_base @ set pointer to IRQ handler mov r10, #DEFERRED_FIQ_MASK @ set deferred_fiq bit str r10, [r12, #IRQ_ISR_REG_OFFSET] @ place it in the ISR register ldr r12, omap1510_gpio_base @ set pointer back to GPIO bank - b restart @ check for next GPIO interrupt + b .Lrestart @ check for next GPIO interrupt @@@@@@@@@@@@@@@@@@@@@@@@@@@ diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h index 2517c4a5a0e200..04b4ba0f59ab8e 100644 --- a/arch/arm/mach-omap2/omap-secure.h +++ b/arch/arm/mach-omap2/omap-secure.h @@ -68,7 +68,7 @@ extern u32 omap_secure_dispatcher(u32 idx, u32 flag, u32 nargs, u32 arg1, u32 arg2, u32 arg3, u32 arg4); extern void omap_smccc_smc(u32 fn, u32 arg); extern void omap_smc1(u32 fn, u32 arg); -extern u32 omap_smc2(u32 id, u32 falg, u32 pargs); +extern u32 omap_smc2(u32 id, u32 flag, u32 pargs); extern u32 omap_smc3(u32 id, u32 process, u32 flag, u32 pargs); extern int omap_secure_ram_reserve_memblock(void); extern u32 save_secure_ram_context(u32 args_pa); diff --git a/arch/arm/mach-omap2/omap-smc.S b/arch/arm/mach-omap2/omap-smc.S index 7376f528034db1..fe3b5478200a46 100644 --- a/arch/arm/mach-omap2/omap-smc.S +++ b/arch/arm/mach-omap2/omap-smc.S @@ -32,7 +32,7 @@ ENTRY(_omap_smc1) ENDPROC(_omap_smc1) /** - * u32 omap_smc2(u32 id, u32 falg, u32 pargs) + * u32 omap_smc2(u32 id, u32 flag, u32 pargs) * Low level common routine for secure HAL and PPA APIs. * @id: Application ID of HAL APIs * @flag: Flag to indicate the criticality of operation diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index c9c2c46ecead02..caad4fca8de3ed 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -34,9 +34,9 @@ extern void __init pxa27x_map_io(void); extern void __init pxa3xx_init_irq(void); extern void __init pxa3xx_map_io(void); -extern struct syscore_ops pxa_irq_syscore_ops; -extern struct syscore_ops pxa2xx_mfp_syscore_ops; -extern struct syscore_ops pxa3xx_mfp_syscore_ops; +extern struct syscore pxa_irq_syscore; +extern struct syscore pxa2xx_mfp_syscore; +extern struct syscore pxa3xx_mfp_syscore; void __init pxa_set_ffuart_info(void *info); void __init pxa_set_btuart_info(void *info); diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 5bfce8aa4102d7..99acebbbf06535 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -178,7 +178,7 @@ void __init pxa_init_irq(int irq_nr, int (*fn)(struct irq_data *, unsigned int)) static unsigned long saved_icmr[MAX_INTERNAL_IRQS/32]; static unsigned long saved_ipr[MAX_INTERNAL_IRQS]; -static int pxa_irq_suspend(void) +static int pxa_irq_suspend(void *data) { int i; @@ -197,7 +197,7 @@ static int pxa_irq_suspend(void) return 0; } -static void pxa_irq_resume(void) +static void pxa_irq_resume(void *data) { int i; @@ -219,11 +219,15 @@ static void pxa_irq_resume(void) #define pxa_irq_resume NULL #endif -struct syscore_ops pxa_irq_syscore_ops = { +static const struct syscore_ops pxa_irq_syscore_ops = { .suspend = pxa_irq_suspend, .resume = pxa_irq_resume, }; +struct syscore pxa_irq_syscore = { + .ops = &pxa_irq_syscore_ops, +}; + #ifdef CONFIG_OF static const struct of_device_id intc_ids[] __initconst = { { .compatible = "marvell,pxa-intc", }, diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index f5a3d890f682e7..d1347055fbe4f1 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -346,7 +346,7 @@ static unsigned long saved_gpdr[4]; static unsigned long saved_gplr[4]; static unsigned long saved_pgsr[4]; -static int pxa2xx_mfp_suspend(void) +static int pxa2xx_mfp_suspend(void *data) { int i; @@ -385,7 +385,7 @@ static int pxa2xx_mfp_suspend(void) return 0; } -static void pxa2xx_mfp_resume(void) +static void pxa2xx_mfp_resume(void *data) { int i; @@ -404,11 +404,15 @@ static void pxa2xx_mfp_resume(void) #define pxa2xx_mfp_resume NULL #endif -struct syscore_ops pxa2xx_mfp_syscore_ops = { +static const struct syscore_ops pxa2xx_mfp_syscore_ops = { .suspend = pxa2xx_mfp_suspend, .resume = pxa2xx_mfp_resume, }; +struct syscore pxa2xx_mfp_syscore = { + .ops = &pxa2xx_mfp_syscore_ops, +}; + static int __init pxa2xx_mfp_init(void) { int i; diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c index d16ab7451efefc..fe7498fbb62b34 100644 --- a/arch/arm/mach-pxa/mfp-pxa3xx.c +++ b/arch/arm/mach-pxa/mfp-pxa3xx.c @@ -27,13 +27,13 @@ * a pull-down mode if they're an active low chip select, and we're * just entering standby. */ -static int pxa3xx_mfp_suspend(void) +static int pxa3xx_mfp_suspend(void *data) { mfp_config_lpm(); return 0; } -static void pxa3xx_mfp_resume(void) +static void pxa3xx_mfp_resume(void *data) { mfp_config_run(); @@ -49,7 +49,11 @@ static void pxa3xx_mfp_resume(void) #define pxa3xx_mfp_resume NULL #endif -struct syscore_ops pxa3xx_mfp_syscore_ops = { +static const struct syscore_ops pxa3xx_mfp_syscore_ops = { .suspend = pxa3xx_mfp_suspend, .resume = pxa3xx_mfp_resume, }; + +struct syscore pxa3xx_mfp_syscore = { + .ops = &pxa3xx_mfp_syscore_ops, +}; diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 03e34841fc004c..70509a5998142e 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -235,8 +235,8 @@ static int __init pxa25x_init(void) pxa25x_init_pm(); - register_syscore_ops(&pxa_irq_syscore_ops); - register_syscore_ops(&pxa2xx_mfp_syscore_ops); + register_syscore(&pxa_irq_syscore); + register_syscore(&pxa2xx_mfp_syscore); if (!of_have_populated_dt()) { software_node_register(&pxa2xx_gpiochip_node); diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index f8382477d629ea..ff636197903838 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -337,8 +337,8 @@ static int __init pxa27x_init(void) pxa27x_init_pm(); - register_syscore_ops(&pxa_irq_syscore_ops); - register_syscore_ops(&pxa2xx_mfp_syscore_ops); + register_syscore(&pxa_irq_syscore); + register_syscore(&pxa2xx_mfp_syscore); if (!of_have_populated_dt()) { software_node_register(&pxa2xx_gpiochip_node); diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 1d1e5713464dc2..06c578ea658e32 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -424,8 +424,8 @@ static int __init pxa3xx_init(void) if (cpu_is_pxa320()) enable_irq_wake(IRQ_WAKEUP1); - register_syscore_ops(&pxa_irq_syscore_ops); - register_syscore_ops(&pxa3xx_mfp_syscore_ops); + register_syscore(&pxa_irq_syscore); + register_syscore(&pxa3xx_mfp_syscore); } return ret; diff --git a/arch/arm/mach-pxa/smemc.c b/arch/arm/mach-pxa/smemc.c index 2d2a321d82f816..fb93a8f28356e0 100644 --- a/arch/arm/mach-pxa/smemc.c +++ b/arch/arm/mach-pxa/smemc.c @@ -18,7 +18,7 @@ static unsigned long msc[2]; static unsigned long sxcnfg, memclkcfg; static unsigned long csadrcfg[4]; -static int pxa3xx_smemc_suspend(void) +static int pxa3xx_smemc_suspend(void *data) { msc[0] = __raw_readl(MSC0); msc[1] = __raw_readl(MSC1); @@ -32,7 +32,7 @@ static int pxa3xx_smemc_suspend(void) return 0; } -static void pxa3xx_smemc_resume(void) +static void pxa3xx_smemc_resume(void *data) { __raw_writel(msc[0], MSC0); __raw_writel(msc[1], MSC1); @@ -46,11 +46,15 @@ static void pxa3xx_smemc_resume(void) __raw_writel(0x2, CSMSADRCFG); } -static struct syscore_ops smemc_syscore_ops = { +static const struct syscore_ops smemc_syscore_ops = { .suspend = pxa3xx_smemc_suspend, .resume = pxa3xx_smemc_resume, }; +static struct syscore smemc_syscore = { + .ops = &smemc_syscore_ops, +}; + static int __init smemc_init(void) { if (cpu_is_pxa3xx()) { @@ -64,7 +68,7 @@ static int __init smemc_init(void) */ __raw_writel(0x2, CSMSADRCFG); - register_syscore_ops(&smemc_syscore_ops); + register_syscore(&smemc_syscore); } return 0; diff --git a/arch/arm/mach-s3c/irq-pm-s3c64xx.c b/arch/arm/mach-s3c/irq-pm-s3c64xx.c index 4a1e935bada191..ab726c595001d8 100644 --- a/arch/arm/mach-s3c/irq-pm-s3c64xx.c +++ b/arch/arm/mach-s3c/irq-pm-s3c64xx.c @@ -58,7 +58,7 @@ static struct irq_grp_save { static u32 irq_uart_mask[SERIAL_SAMSUNG_UARTS]; -static int s3c64xx_irq_pm_suspend(void) +static int s3c64xx_irq_pm_suspend(void *data) { struct irq_grp_save *grp = eint_grp_save; int i; @@ -79,7 +79,7 @@ static int s3c64xx_irq_pm_suspend(void) return 0; } -static void s3c64xx_irq_pm_resume(void) +static void s3c64xx_irq_pm_resume(void *data) { struct irq_grp_save *grp = eint_grp_save; int i; @@ -100,18 +100,22 @@ static void s3c64xx_irq_pm_resume(void) S3C_PMDBG("%s: IRQ configuration restored\n", __func__); } -static struct syscore_ops s3c64xx_irq_syscore_ops = { +static const struct syscore_ops s3c64xx_irq_syscore_ops = { .suspend = s3c64xx_irq_pm_suspend, .resume = s3c64xx_irq_pm_resume, }; +static struct syscore s3c64xx_irq_syscore = { + .ops = &s3c64xx_irq_syscore_ops, +}; + static __init int s3c64xx_syscore_init(void) { /* Appropriate drivers (pinctrl, uart) handle this when using DT. */ if (of_have_populated_dt() || !soc_is_s3c64xx()) return 0; - register_syscore_ops(&s3c64xx_irq_syscore_ops); + register_syscore(&s3c64xx_irq_syscore); return 0; } diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c index 6fa70f787df4e0..fa270750364cf4 100644 --- a/arch/arm/mach-s5pv210/pm.c +++ b/arch/arm/mach-s5pv210/pm.c @@ -195,20 +195,24 @@ static const struct platform_suspend_ops s5pv210_suspend_ops = { /* * Syscore operations used to delay restore of certain registers. */ -static void s5pv210_pm_resume(void) +static void s5pv210_pm_resume(void *data) { s3c_pm_do_restore_core(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save)); } -static struct syscore_ops s5pv210_pm_syscore_ops = { +static const struct syscore_ops s5pv210_pm_syscore_ops = { .resume = s5pv210_pm_resume, }; +static struct syscore s5pv210_pm_syscore = { + .ops = &s5pv210_pm_syscore_ops, +}; + /* * Initialization entry point. */ void __init s5pv210_pm_init(void) { - register_syscore_ops(&s5pv210_pm_syscore_ops); + register_syscore(&s5pv210_pm_syscore); suspend_set_ops(&s5pv210_suspend_ops); } diff --git a/arch/arm/mach-versatile/integrator_ap.c b/arch/arm/mach-versatile/integrator_ap.c index 4bd6712e9f525d..ee90d6619d0db9 100644 --- a/arch/arm/mach-versatile/integrator_ap.c +++ b/arch/arm/mach-versatile/integrator_ap.c @@ -63,13 +63,13 @@ static void __init ap_map_io(void) #ifdef CONFIG_PM static unsigned long ic_irq_enable; -static int irq_suspend(void) +static int irq_suspend(void *data) { ic_irq_enable = readl(VA_IC_BASE + IRQ_ENABLE); return 0; } -static void irq_resume(void) +static void irq_resume(void *data) { /* disable all irq sources */ cm_clear_irqs(); @@ -83,14 +83,18 @@ static void irq_resume(void) #define irq_resume NULL #endif -static struct syscore_ops irq_syscore_ops = { +static const struct syscore_ops irq_syscore_ops = { .suspend = irq_suspend, .resume = irq_resume, }; +static struct syscore irq_syscore = { + .ops = &irq_syscore_ops, +}; + static int __init irq_syscore_init(void) { - register_syscore_ops(&irq_syscore_ops); + register_syscore(&irq_syscore); return 0; } diff --git a/arch/arm/mach-versatile/versatile.c b/arch/arm/mach-versatile/versatile.c index 7ef03d0c224d57..f0c80d4663ca57 100644 --- a/arch/arm/mach-versatile/versatile.c +++ b/arch/arm/mach-versatile/versatile.c @@ -134,7 +134,7 @@ static void __init versatile_dt_pci_init(void) val = readl(versatile_sys_base + VERSATILE_SYS_PCICTL_OFFSET); if (val & 1) { /* - * Enable PCI accesses. Note that the documentaton is + * Enable PCI accesses. Note that the documentation is * inconsistent whether or not this is needed, but the old * driver had it so we will keep it. */ diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 3c6ddb1afdc463..812380f30ae36a 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -19,10 +19,11 @@ #include #include #include +#include #include #include -#include +#include #include #include "fault.h" @@ -809,6 +810,9 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) int thumb2_32b = 0; int fault; + if (addr >= TASK_SIZE && user_mode(regs)) + harden_branch_predictor(); + if (interrupts_enabled(regs)) local_irq_enable(); diff --git a/arch/arm/mm/cache-b15-rac.c b/arch/arm/mm/cache-b15-rac.c index 6f63b90f9e1ac7..e7807356dfab0f 100644 --- a/arch/arm/mm/cache-b15-rac.c +++ b/arch/arm/mm/cache-b15-rac.c @@ -256,7 +256,7 @@ static int b15_rac_dead_cpu(unsigned int cpu) return 0; } -static int b15_rac_suspend(void) +static int b15_rac_suspend(void *data) { /* Suspend the read-ahead cache oeprations, forcing our cache * implementation to fallback to the regular ARMv7 calls. @@ -271,7 +271,7 @@ static int b15_rac_suspend(void) return 0; } -static void b15_rac_resume(void) +static void b15_rac_resume(void *data) { /* Coming out of a S3 suspend/resume cycle, the read-ahead cache * register RAC_CONFIG0_REG will be restored to its default value, make @@ -282,11 +282,15 @@ static void b15_rac_resume(void) clear_bit(RAC_SUSPENDED, &b15_rac_flags); } -static struct syscore_ops b15_rac_syscore_ops = { +static const struct syscore_ops b15_rac_syscore_ops = { .suspend = b15_rac_suspend, .resume = b15_rac_resume, }; +static struct syscore b15_rac_syscore = { + .ops = &b15_rac_syscore_ops, +}; + static int __init b15_rac_init(void) { struct device_node *dn, *cpu_dn; @@ -347,7 +351,7 @@ static int __init b15_rac_init(void) } if (IS_ENABLED(CONFIG_PM_SLEEP)) - register_syscore_ops(&b15_rac_syscore_ops); + register_syscore(&b15_rac_syscore); spin_lock(&rac_lock); reg = __raw_readl(b15_rac_base + RAC_CONFIG0_REG); diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 08641a936394ce..a4c765d24692a1 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -624,16 +624,14 @@ static void __arm_dma_free(struct device *dev, size_t size, void *cpu_addr, kfree(buf); } -static void dma_cache_maint_page(struct page *page, unsigned long offset, - size_t size, enum dma_data_direction dir, +static void dma_cache_maint_page(phys_addr_t phys, size_t size, + enum dma_data_direction dir, void (*op)(const void *, size_t, int)) { - unsigned long pfn; + unsigned long offset = offset_in_page(phys); + unsigned long pfn = __phys_to_pfn(phys); size_t left = size; - pfn = page_to_pfn(page) + offset / PAGE_SIZE; - offset %= PAGE_SIZE; - /* * A single sg entry may refer to multiple physically contiguous * pages. But we still need to process highmem pages individually. @@ -644,17 +642,18 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset, size_t len = left; void *vaddr; - page = pfn_to_page(pfn); - - if (PageHighMem(page)) { + phys = __pfn_to_phys(pfn); + if (PhysHighMem(phys)) { if (len + offset > PAGE_SIZE) len = PAGE_SIZE - offset; if (cache_is_vipt_nonaliasing()) { - vaddr = kmap_atomic(page); + vaddr = kmap_atomic_pfn(pfn); op(vaddr + offset, len, dir); kunmap_atomic(vaddr); } else { + struct page *page = phys_to_page(phys); + vaddr = kmap_high_get(page); if (vaddr) { op(vaddr + offset, len, dir); @@ -662,7 +661,8 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset, } } } else { - vaddr = page_address(page) + offset; + phys += offset; + vaddr = phys_to_virt(phys); op(vaddr, len, dir); } offset = 0; @@ -676,14 +676,11 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset, * Note: Drivers should NOT use this function directly. * Use the driver DMA support - see dma-mapping.h (dma_sync_*) */ -static void __dma_page_cpu_to_dev(struct page *page, unsigned long off, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_device(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { - phys_addr_t paddr; + dma_cache_maint_page(paddr, size, dir, dmac_map_area); - dma_cache_maint_page(page, off, size, dir, dmac_map_area); - - paddr = page_to_phys(page) + off; if (dir == DMA_FROM_DEVICE) { outer_inv_range(paddr, paddr + size); } else { @@ -692,17 +689,15 @@ static void __dma_page_cpu_to_dev(struct page *page, unsigned long off, /* FIXME: non-speculating: flush on bidirectional mappings? */ } -static void __dma_page_dev_to_cpu(struct page *page, unsigned long off, - size_t size, enum dma_data_direction dir) +void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) { - phys_addr_t paddr = page_to_phys(page) + off; - /* FIXME: non-speculating: not required */ /* in any case, don't bother invalidating if DMA to device */ if (dir != DMA_TO_DEVICE) { outer_inv_range(paddr, paddr + size); - dma_cache_maint_page(page, off, size, dir, dmac_unmap_area); + dma_cache_maint_page(paddr, size, dir, dmac_unmap_area); } /* @@ -737,6 +732,9 @@ static int __dma_info_to_prot(enum dma_data_direction dir, unsigned long attrs) if (attrs & DMA_ATTR_PRIVILEGED) prot |= IOMMU_PRIV; + if (attrs & DMA_ATTR_MMIO) + prot |= IOMMU_MMIO; + switch (dir) { case DMA_BIDIRECTIONAL: return prot | IOMMU_READ | IOMMU_WRITE; @@ -1205,7 +1203,7 @@ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg, unsigned int len = PAGE_ALIGN(s->offset + s->length); if (!dev->dma_coherent && !(attrs & DMA_ATTR_SKIP_CPU_SYNC)) - __dma_page_cpu_to_dev(sg_page(s), s->offset, s->length, dir); + arch_sync_dma_for_device(sg_phys(s), s->length, dir); prot = __dma_info_to_prot(dir, attrs); @@ -1307,8 +1305,7 @@ static void arm_iommu_unmap_sg(struct device *dev, __iommu_remove_mapping(dev, sg_dma_address(s), sg_dma_len(s)); if (!dev->dma_coherent && !(attrs & DMA_ATTR_SKIP_CPU_SYNC)) - __dma_page_dev_to_cpu(sg_page(s), s->offset, - s->length, dir); + arch_sync_dma_for_cpu(sg_phys(s), s->length, dir); } } @@ -1330,7 +1327,7 @@ static void arm_iommu_sync_sg_for_cpu(struct device *dev, return; for_each_sg(sg, s, nents, i) - __dma_page_dev_to_cpu(sg_page(s), s->offset, s->length, dir); + arch_sync_dma_for_cpu(sg_phys(s), s->length, dir); } @@ -1352,29 +1349,31 @@ static void arm_iommu_sync_sg_for_device(struct device *dev, return; for_each_sg(sg, s, nents, i) - __dma_page_cpu_to_dev(sg_page(s), s->offset, s->length, dir); + arch_sync_dma_for_device(sg_phys(s), s->length, dir); } /** - * arm_iommu_map_page + * arm_iommu_map_phys * @dev: valid struct device pointer - * @page: page that buffer resides in - * @offset: offset into page for start of buffer + * @phys: physical address that buffer resides in * @size: size of buffer to map * @dir: DMA transfer direction + * @attrs: DMA mapping attributes * * IOMMU aware version of arm_dma_map_page() */ -static dma_addr_t arm_iommu_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, enum dma_data_direction dir, - unsigned long attrs) +static dma_addr_t arm_iommu_map_phys(struct device *dev, phys_addr_t phys, + size_t size, enum dma_data_direction dir, unsigned long attrs) { struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev); + int len = PAGE_ALIGN(size + offset_in_page(phys)); + phys_addr_t addr = phys & PAGE_MASK; dma_addr_t dma_addr; - int ret, prot, len = PAGE_ALIGN(size + offset); + int ret, prot; - if (!dev->dma_coherent && !(attrs & DMA_ATTR_SKIP_CPU_SYNC)) - __dma_page_cpu_to_dev(page, offset, size, dir); + if (!dev->dma_coherent && + !(attrs & (DMA_ATTR_SKIP_CPU_SYNC | DMA_ATTR_MMIO))) + arch_sync_dma_for_device(phys, size, dir); dma_addr = __alloc_iova(mapping, len); if (dma_addr == DMA_MAPPING_ERROR) @@ -1382,12 +1381,11 @@ static dma_addr_t arm_iommu_map_page(struct device *dev, struct page *page, prot = __dma_info_to_prot(dir, attrs); - ret = iommu_map(mapping->domain, dma_addr, page_to_phys(page), len, - prot, GFP_KERNEL); + ret = iommu_map(mapping->domain, dma_addr, addr, len, prot, GFP_KERNEL); if (ret < 0) goto fail; - return dma_addr + offset; + return dma_addr + offset_in_page(phys); fail: __free_iova(mapping, dma_addr, len); return DMA_MAPPING_ERROR; @@ -1399,82 +1397,27 @@ static dma_addr_t arm_iommu_map_page(struct device *dev, struct page *page, * @handle: DMA address of buffer * @size: size of buffer (same as passed to dma_map_page) * @dir: DMA transfer direction (same as passed to dma_map_page) + * @attrs: DMA mapping attributes * - * IOMMU aware version of arm_dma_unmap_page() + * IOMMU aware version of arm_dma_unmap_phys() */ -static void arm_iommu_unmap_page(struct device *dev, dma_addr_t handle, +static void arm_iommu_unmap_phys(struct device *dev, dma_addr_t handle, size_t size, enum dma_data_direction dir, unsigned long attrs) { struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev); dma_addr_t iova = handle & PAGE_MASK; - struct page *page; int offset = handle & ~PAGE_MASK; int len = PAGE_ALIGN(size + offset); if (!iova) return; - if (!dev->dma_coherent && !(attrs & DMA_ATTR_SKIP_CPU_SYNC)) { - page = phys_to_page(iommu_iova_to_phys(mapping->domain, iova)); - __dma_page_dev_to_cpu(page, offset, size, dir); - } - - iommu_unmap(mapping->domain, iova, len); - __free_iova(mapping, iova, len); -} - -/** - * arm_iommu_map_resource - map a device resource for DMA - * @dev: valid struct device pointer - * @phys_addr: physical address of resource - * @size: size of resource to map - * @dir: DMA transfer direction - */ -static dma_addr_t arm_iommu_map_resource(struct device *dev, - phys_addr_t phys_addr, size_t size, - enum dma_data_direction dir, unsigned long attrs) -{ - struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev); - dma_addr_t dma_addr; - int ret, prot; - phys_addr_t addr = phys_addr & PAGE_MASK; - unsigned int offset = phys_addr & ~PAGE_MASK; - size_t len = PAGE_ALIGN(size + offset); - - dma_addr = __alloc_iova(mapping, len); - if (dma_addr == DMA_MAPPING_ERROR) - return dma_addr; - - prot = __dma_info_to_prot(dir, attrs) | IOMMU_MMIO; - - ret = iommu_map(mapping->domain, dma_addr, addr, len, prot, GFP_KERNEL); - if (ret < 0) - goto fail; - - return dma_addr + offset; -fail: - __free_iova(mapping, dma_addr, len); - return DMA_MAPPING_ERROR; -} + if (!dev->dma_coherent && + !(attrs & (DMA_ATTR_SKIP_CPU_SYNC | DMA_ATTR_MMIO))) { + phys_addr_t phys = iommu_iova_to_phys(mapping->domain, iova); -/** - * arm_iommu_unmap_resource - unmap a device DMA resource - * @dev: valid struct device pointer - * @dma_handle: DMA address to resource - * @size: size of resource to map - * @dir: DMA transfer direction - */ -static void arm_iommu_unmap_resource(struct device *dev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction dir, - unsigned long attrs) -{ - struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev); - dma_addr_t iova = dma_handle & PAGE_MASK; - unsigned int offset = dma_handle & ~PAGE_MASK; - size_t len = PAGE_ALIGN(size + offset); - - if (!iova) - return; + arch_sync_dma_for_cpu(phys + offset, size, dir); + } iommu_unmap(mapping->domain, iova, len); __free_iova(mapping, iova, len); @@ -1485,14 +1428,14 @@ static void arm_iommu_sync_single_for_cpu(struct device *dev, { struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev); dma_addr_t iova = handle & PAGE_MASK; - struct page *page; unsigned int offset = handle & ~PAGE_MASK; + phys_addr_t phys; if (dev->dma_coherent || !iova) return; - page = phys_to_page(iommu_iova_to_phys(mapping->domain, iova)); - __dma_page_dev_to_cpu(page, offset, size, dir); + phys = iommu_iova_to_phys(mapping->domain, iova); + arch_sync_dma_for_cpu(phys + offset, size, dir); } static void arm_iommu_sync_single_for_device(struct device *dev, @@ -1500,14 +1443,14 @@ static void arm_iommu_sync_single_for_device(struct device *dev, { struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev); dma_addr_t iova = handle & PAGE_MASK; - struct page *page; unsigned int offset = handle & ~PAGE_MASK; + phys_addr_t phys; if (dev->dma_coherent || !iova) return; - page = phys_to_page(iommu_iova_to_phys(mapping->domain, iova)); - __dma_page_cpu_to_dev(page, offset, size, dir); + phys = iommu_iova_to_phys(mapping->domain, iova); + arch_sync_dma_for_device(phys + offset, size, dir); } static const struct dma_map_ops iommu_ops = { @@ -1516,8 +1459,8 @@ static const struct dma_map_ops iommu_ops = { .mmap = arm_iommu_mmap_attrs, .get_sgtable = arm_iommu_get_sgtable, - .map_page = arm_iommu_map_page, - .unmap_page = arm_iommu_unmap_page, + .map_phys = arm_iommu_map_phys, + .unmap_phys = arm_iommu_unmap_phys, .sync_single_for_cpu = arm_iommu_sync_single_for_cpu, .sync_single_for_device = arm_iommu_sync_single_for_device, @@ -1525,9 +1468,6 @@ static const struct dma_map_ops iommu_ops = { .unmap_sg = arm_iommu_unmap_sg, .sync_sg_for_cpu = arm_iommu_sync_sg_for_cpu, .sync_sg_for_device = arm_iommu_sync_sg_for_device, - - .map_resource = arm_iommu_map_resource, - .unmap_resource = arm_iommu_unmap_resource, }; /** @@ -1794,20 +1734,6 @@ void arch_teardown_dma_ops(struct device *dev) set_dma_ops(dev, NULL); } -void arch_sync_dma_for_device(phys_addr_t paddr, size_t size, - enum dma_data_direction dir) -{ - __dma_page_cpu_to_dev(phys_to_page(paddr), paddr & (PAGE_SIZE - 1), - size, dir); -} - -void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size, - enum dma_data_direction dir) -{ - __dma_page_dev_to_cpu(phys_to_page(paddr), paddr & (PAGE_SIZE - 1), - size, dir); -} - void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs) { diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 2bc828a1940c05..ed4330cc3f4e6f 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -128,6 +128,19 @@ static inline bool is_translation_fault(unsigned int fsr) return false; } +static inline bool is_permission_fault(unsigned int fsr) +{ + int fs = fsr_fs(fsr); +#ifdef CONFIG_ARM_LPAE + if ((fs & FS_MMU_NOLL_MASK) == FS_PERM_NOLL) + return true; +#else + if (fs == FS_L1_PERM || fs == FS_L2_PERM) + return true; +#endif + return false; +} + static void die_kernel_fault(const char *msg, struct mm_struct *mm, unsigned long addr, unsigned int fsr, struct pt_regs *regs) @@ -162,6 +175,8 @@ __do_kernel_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr, */ if (addr < PAGE_SIZE) { msg = "NULL pointer dereference"; + } else if (is_permission_fault(fsr) && fsr & FSR_LNX_PF) { + msg = "execution of memory"; } else { if (is_translation_fault(fsr) && kfence_handle_page_fault(addr, is_write_fault(fsr), regs)) @@ -183,9 +198,6 @@ __do_user_fault(unsigned long addr, unsigned int fsr, unsigned int sig, { struct task_struct *tsk = current; - if (addr > TASK_SIZE) - harden_branch_predictor(); - #ifdef CONFIG_DEBUG_USER if (((user_debug & UDBG_SEGV) && (sig == SIGSEGV)) || ((user_debug & UDBG_BUS) && (sig == SIGBUS))) { @@ -225,19 +237,6 @@ void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs) } #ifdef CONFIG_MMU -static inline bool is_permission_fault(unsigned int fsr) -{ - int fs = fsr_fs(fsr); -#ifdef CONFIG_ARM_LPAE - if ((fs & FS_MMU_NOLL_MASK) == FS_PERM_NOLL) - return true; -#else - if (fs == FS_L1_PERM || fs == FS_L2_PERM) - return true; -#endif - return false; -} - #ifdef CONFIG_CPU_TTBR0_PAN static inline bool ttbr0_usermode_access_allowed(struct pt_regs *regs) { @@ -259,6 +258,37 @@ static inline bool ttbr0_usermode_access_allowed(struct pt_regs *regs) } #endif +static int __kprobes +do_kernel_address_page_fault(struct mm_struct *mm, unsigned long addr, + unsigned int fsr, struct pt_regs *regs) +{ + if (user_mode(regs)) { + /* + * Fault from user mode for a kernel space address. User mode + * should not be faulting in kernel space, which includes the + * vector/khelper page. Handle the branch predictor hardening + * while interrupts are still disabled, then send a SIGSEGV. + */ + harden_branch_predictor(); + __do_user_fault(addr, fsr, SIGSEGV, SEGV_MAPERR, regs); + } else { + /* + * Fault from kernel mode. Enable interrupts if they were + * enabled in the parent context. Section (upper page table) + * translation faults are handled via do_translation_fault(), + * so we will only get here for a non-present kernel space + * PTE or PTE permission fault. This may happen in exceptional + * circumstances and need the fixup tables to be walked. + */ + if (interrupts_enabled(regs)) + local_irq_enable(); + + __do_kernel_fault(mm, addr, fsr, regs); + } + + return 0; +} + static int __kprobes do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { @@ -272,6 +302,12 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (kprobe_page_fault(regs, fsr)) return 0; + /* + * Handle kernel addresses faults separately, which avoids touching + * the mmap lock from contexts that are not able to sleep. + */ + if (addr >= TASK_SIZE) + return do_kernel_address_page_fault(mm, addr, fsr, regs); /* Enable interrupts if they were enabled in the parent context. */ if (interrupts_enabled(regs)) @@ -448,16 +484,20 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) * We enter here because the first level page table doesn't contain * a valid entry for the address. * - * If the address is in kernel space (>= TASK_SIZE), then we are - * probably faulting in the vmalloc() area. + * If this is a user address (addr < TASK_SIZE), we handle this as a + * normal page fault. This leaves the remainder of the function to handle + * kernel address translation faults. + * + * Since user mode is not permitted to access kernel addresses, pass these + * directly to do_kernel_address_page_fault() to handle. * - * If the init_task's first level page tables contains the relevant - * entry, we copy the it to this task. If not, we send the process - * a signal, fixup the exception, or oops the kernel. + * Otherwise, we're probably faulting in the vmalloc() area, so try to fix + * that up. Note that we must not take any locks or enable interrupts in + * this case. * - * NOTE! We MUST NOT take any locks for this case. We may be in an - * interrupt or a critical region, and should only copy the information - * from the master page table, nothing more. + * If vmalloc() fixup fails, that means the non-leaf page tables did not + * contain an entry for this address, so handle this via + * do_kernel_address_page_fault(). */ #ifdef CONFIG_MMU static int __kprobes @@ -523,7 +563,8 @@ do_translation_fault(unsigned long addr, unsigned int fsr, return 0; bad_area: - do_bad_area(addr, fsr, regs); + do_kernel_address_page_fault(current->mm, addr, fsr, regs); + return 0; } #else /* CONFIG_MMU */ @@ -543,7 +584,16 @@ do_translation_fault(unsigned long addr, unsigned int fsr, static int do_sect_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { + /* + * If this is a kernel address, but from user mode, then userspace + * is trying bad stuff. Invoke the branch predictor handling. + * Interrupts are disabled here. + */ + if (addr >= TASK_SIZE && user_mode(regs)) + harden_branch_predictor(); + do_bad_area(addr, fsr, regs); + return 0; } #endif /* CONFIG_ARM_LPAE */ diff --git a/arch/arm/tools/syscall.tbl b/arch/arm/tools/syscall.tbl index b07e699aaa3c28..fd09afae72a242 100644 --- a/arch/arm/tools/syscall.tbl +++ b/arch/arm/tools/syscall.tbl @@ -484,3 +484,4 @@ 467 common open_tree_attr sys_open_tree_attr 468 common file_getattr sys_file_getattr 469 common file_setattr sys_file_setattr +470 common listns sys_listns diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 6663ffd23f252e..93173f0a09c7de 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -21,6 +21,7 @@ config ARM64 select ARCH_ENABLE_THP_MIGRATION if TRANSPARENT_HUGEPAGE select ARCH_HAS_CACHE_LINE_SIZE select ARCH_HAS_CC_PLATFORM + select ARCH_HAS_CPU_CACHE_INVALIDATE_MEMREGION select ARCH_HAS_CURRENT_STACK_POINTER select ARCH_HAS_DEBUG_VIRTUAL select ARCH_HAS_DEBUG_VM_PGTABLE @@ -47,7 +48,6 @@ config ARM64 select ARCH_HAS_SETUP_DMA_OPS select ARCH_HAS_SET_DIRECT_MAP select ARCH_HAS_SET_MEMORY - select ARCH_HAS_MEM_ENCRYPT select ARCH_HAS_FORCE_DMA_UNENCRYPTED select ARCH_STACKWALK select ARCH_HAS_STRICT_KERNEL_RWX @@ -149,6 +149,7 @@ config ARM64 select GENERIC_ARCH_TOPOLOGY select GENERIC_CLOCKEVENTS_BROADCAST select GENERIC_CPU_AUTOPROBE + select GENERIC_CPU_CACHE_MAINTENANCE select GENERIC_CPU_DEVICES select GENERIC_CPU_VULNERABILITIES select GENERIC_EARLY_IOREMAP @@ -2023,6 +2024,31 @@ config ARM64_TLB_RANGE ARMv8.4-TLBI provides TLBI invalidation instruction that apply to a range of input addresses. +config ARM64_MPAM + bool "Enable support for MPAM" + select ARM64_MPAM_DRIVER if EXPERT # does nothing yet + select ACPI_MPAM if ACPI + help + Memory System Resource Partitioning and Monitoring (MPAM) is an + optional extension to the Arm architecture that allows each + transaction issued to the memory system to be labelled with a + Partition identifier (PARTID) and Performance Monitoring Group + identifier (PMG). + + Memory system components, such as the caches, can be configured with + policies to control how much of various physical resources (such as + memory bandwidth or cache memory) the transactions labelled with each + PARTID can consume. Depending on the capabilities of the hardware, + the PARTID and PMG can also be used as filtering criteria to measure + the memory system resource consumption of different parts of a + workload. + + Use of this extension requires CPU support, support in the + Memory System Components (MSC), and a description from firmware + of where the MSCs are in the address space. + + MPAM is exposed to user-space via the resctrl pseudo filesystem. + endmenu # "ARMv8.4 architectural features" menu "ARMv8.5 architectural features" diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 13173795c43d4f..fff14807c965a1 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -119,6 +119,14 @@ config ARCH_BLAIZE help This enables support for the Blaize SoC family +config ARCH_BST + bool "Black Sesame Technologies SoC Family" + help + This enables support for Black Sesame Technologies (BST) SoC family. + BST produces automotive-grade system-on-chips for intelligent driving, + focusing on computer vision and AI capabilities. The BST C1200 family + includes SoCs for ADAS and autonomous driving applications. + config ARCH_CIX bool "Cixtech SoC family" help @@ -316,6 +324,7 @@ config ARCH_QCOM select GPIOLIB select PINCTRL select HAVE_PWRCTRL if PCI + select HAVE_SHARED_GPIOS help This enables support for the ARMv8 based Qualcomm chipsets. diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index b0844404eda183..98ec8f1b76e475 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -13,6 +13,7 @@ subdir-y += axiado subdir-y += bitmain subdir-y += blaize subdir-y += broadcom +subdir-y += bst subdir-y += cavium subdir-y += cix subdir-y += exynos diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi index ceedae9e399b6e..8d1110c14bad2f 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi @@ -304,6 +304,42 @@ mmc2_pins: mmc2-pins { bias-pull-up; }; + /omit-if-no-ref/ + nand_pins: nand-pins { + pins = "PC0", "PC1", "PC2", "PC5", "PC8", "PC9", + "PC10", "PC11", "PC12", "PC13", "PC14", + "PC15", "PC16"; + function = "nand0"; + }; + + /omit-if-no-ref/ + nand_cs0_pin: nand-cs0-pin { + pins = "PC4"; + function = "nand0"; + bias-pull-up; + }; + + /omit-if-no-ref/ + nand_cs1_pin: nand-cs1-pin { + pins = "PC3"; + function = "nand0"; + bias-pull-up; + }; + + /omit-if-no-ref/ + nand_rb0_pin: nand-rb0-pin { + pins = "PC6"; + function = "nand0"; + bias-pull-up; + }; + + /omit-if-no-ref/ + nand_rb1_pin: nand-rb1-pin { + pins = "PC7"; + function = "nand0"; + bias-pull-up; + }; + /omit-if-no-ref/ spi0_pins: spi0-pins { pins = "PC0", "PC2", "PC4"; @@ -377,6 +413,22 @@ iommu: iommu@30f0000 { #iommu-cells = <1>; }; + nfc: nand-controller@4011000 { + compatible = "allwinner,sun50i-h616-nand-controller"; + reg = <0x04011000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND0>, + <&ccu CLK_NAND1>, <&ccu CLK_MBUS_NAND>; + clock-names = "ahb", "mod", "ecc", "mbus"; + resets = <&ccu RST_BUS_NAND>; + reset-names = "ahb"; + dmas = <&dma 10>; + dma-names = "rxtx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + mmc0: mmc@4020000 { compatible = "allwinner,sun50i-h616-mmc", "allwinner,sun50i-a100-mmc"; diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi index 7b36c47a3a1399..42dab01e3f56b2 100644 --- a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi @@ -145,6 +145,14 @@ pio: pinctrl@2000000 { interrupt-controller; #interrupt-cells = <3>; + /omit-if-no-ref/ + i2s2_pi_pins: i2s2-pi-pins { + pins = "PI2", "PI3", "PI4", "PI5"; + allwinner,pinmux = <5>; + function = "i2s2"; + bias-disable; + }; + mmc0_pins: mmc0-pins { pins = "PF0" ,"PF1", "PF2", "PF3", "PF4", "PF5"; allwinner,pinmux = <2>; @@ -182,6 +190,30 @@ rgmii0_pins: rgmii0-pins { bias-disable; }; + rgmii1_pins: rgmii1-pins { + pins = "PJ0", "PJ1", "PJ2", "PJ3", "PJ4", + "PJ5", "PJ6", "PJ7", "PJ8", "PJ9", + "PJ11", "PJ12", "PJ13", "PJ14", "PJ15"; + allwinner,pinmux = <5>; + function = "gmac1"; + drive-strength = <40>; + bias-disable; + }; + + /omit-if-no-ref/ + spdif_out_pb_pin: spdif-pb-pin { + pins = "PB8"; + function = "spdif"; + allwinner,pinmux = <2>; + }; + + /omit-if-no-ref/ + spdif_out_pi_pin: spdif-pi-pin { + pins = "PI10"; + function = "spdif"; + allwinner,pinmux = <2>; + }; + uart0_pb_pins: uart0-pb-pins { pins = "PB9", "PB10"; allwinner,pinmux = <2>; @@ -231,6 +263,8 @@ uart0: serial@2500000 { reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART0>; resets = <&ccu RST_BUS_UART0>; + dmas = <&dma 14>, <&dma 14>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -242,6 +276,8 @@ uart1: serial@2500400 { reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART1>; resets = <&ccu RST_BUS_UART1>; + dmas = <&dma 15>, <&dma 15>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -253,6 +289,8 @@ uart2: serial@2500800 { reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART2>; resets = <&ccu RST_BUS_UART2>; + dmas = <&dma 16>, <&dma 16>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -264,6 +302,8 @@ uart3: serial@2500c00 { reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART3>; resets = <&ccu RST_BUS_UART3>; + dmas = <&dma 17>, <&dma 17>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -275,6 +315,8 @@ uart4: serial@2501000 { reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART4>; resets = <&ccu RST_BUS_UART4>; + dmas = <&dma 18>, <&dma 18>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -286,6 +328,8 @@ uart5: serial@2501400 { reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART5>; resets = <&ccu RST_BUS_UART5>; + dmas = <&dma 19>, <&dma 19>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -297,6 +341,8 @@ uart6: serial@2501800 { reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART6>; resets = <&ccu RST_BUS_UART6>; + dmas = <&dma 20>, <&dma 20>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -308,6 +354,8 @@ uart7: serial@2501c00 { reg-io-width = <4>; clocks = <&ccu CLK_BUS_UART7>; resets = <&ccu RST_BUS_UART7>; + dmas = <&dma 21>, <&dma 21>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -319,6 +367,8 @@ i2c0: i2c@2502000 { interrupts = ; clocks = <&ccu CLK_BUS_I2C0>; resets = <&ccu RST_BUS_I2C0>; + dmas = <&dma 43>, <&dma 43>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -332,6 +382,8 @@ i2c1: i2c@2502400 { interrupts = ; clocks = <&ccu CLK_BUS_I2C1>; resets = <&ccu RST_BUS_I2C1>; + dmas = <&dma 44>, <&dma 44>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -345,6 +397,8 @@ i2c2: i2c@2502800 { interrupts = ; clocks = <&ccu CLK_BUS_I2C2>; resets = <&ccu RST_BUS_I2C2>; + dmas = <&dma 45>, <&dma 45>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -358,6 +412,8 @@ i2c3: i2c@2502c00 { interrupts = ; clocks = <&ccu CLK_BUS_I2C3>; resets = <&ccu RST_BUS_I2C3>; + dmas = <&dma 46>, <&dma 46>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -371,6 +427,8 @@ i2c4: i2c@2503000 { interrupts = ; clocks = <&ccu CLK_BUS_I2C4>; resets = <&ccu RST_BUS_I2C4>; + dmas = <&dma 47>, <&dma 47>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -384,6 +442,8 @@ i2c5: i2c@2503400 { interrupts = ; clocks = <&ccu CLK_BUS_I2C5>; resets = <&ccu RST_BUS_I2C5>; + dmas = <&dma 48>, <&dma 48>; + dma-names = "rx", "tx"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -398,6 +458,19 @@ syscon: syscon@3000000 { ranges; }; + dma: dma-controller@3002000 { + compatible = "allwinner,sun55i-a523-dma", + "allwinner,sun50i-a100-dma"; + reg = <0x03002000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>; + clock-names = "bus", "mbus"; + dma-channels = <16>; + dma-requests = <54>; + resets = <&ccu RST_BUS_DMA>; + #dma-cells = <1>; + }; + sid: efuse@3006000 { compatible = "allwinner,sun55i-a523-sid", "allwinner,sun50i-a64-sid"; @@ -603,6 +676,51 @@ mdio0: mdio { }; }; + gmac1: ethernet@4510000 { + compatible = "allwinner,sun55i-a523-gmac200", + "snps,dwmac-4.20a"; + reg = <0x04510000 0x10000>; + clocks = <&ccu CLK_BUS_EMAC1>, <&ccu CLK_MBUS_EMAC1>; + clock-names = "stmmaceth", "mbus"; + resets = <&ccu RST_BUS_EMAC1>; + reset-names = "stmmaceth"; + interrupts = ; + interrupt-names = "macirq"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins>; + power-domains = <&pck600 PD_VO1>; + syscon = <&syscon>; + snps,fixed-burst; + snps,axi-config = <&gmac1_stmmac_axi_setup>; + snps,mtl-rx-config = <&gmac1_mtl_rx_setup>; + snps,mtl-tx-config = <&gmac1_mtl_tx_setup>; + status = "disabled"; + + mdio1: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gmac1_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + + queue0 {}; + }; + + gmac1_stmmac_axi_setup: stmmac-axi-config { + snps,wr_osr_lmt = <0xf>; + snps,rd_osr_lmt = <0xf>; + snps,blen = <256 128 64 32 16 8 4>; + }; + + gmac1_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + + queue0 {}; + }; + }; + ppu: power-controller@7001400 { compatible = "allwinner,sun55i-a523-ppu"; reg = <0x07001400 0x400>; @@ -674,6 +792,8 @@ r_i2c0: i2c@7081400 { reg = <0x07081400 0x400>; interrupts = ; clocks = <&r_ccu CLK_BUS_R_I2C0>; + dmas = <&dma 49>, <&dma 49>; + dma-names = "rx", "tx"; resets = <&r_ccu RST_BUS_R_I2C0>; pinctrl-names = "default"; pinctrl-0 = <&r_i2c_pins>; @@ -720,6 +840,90 @@ mcu_ccu: clock-controller@7102000 { #reset-cells = <1>; }; + i2s0: i2s@7112000 { + compatible = "allwinner,sun55i-a523-i2s", + "allwinner,sun50i-r329-i2s"; + reg = <0x07112000 0x1000>; + interrupts = ; + clocks = <&mcu_ccu CLK_BUS_MCU_I2S0>, <&mcu_ccu CLK_MCU_I2S0>; + clock-names = "apb", "mod"; + resets = <&mcu_ccu RST_BUS_MCU_I2S0>; + dmas = <&mcu_dma 3>, <&mcu_dma 3>; + dma-names = "rx", "tx"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s1: i2s@7113000 { + compatible = "allwinner,sun55i-a523-i2s", + "allwinner,sun50i-r329-i2s"; + reg = <0x07113000 0x1000>; + interrupts = ; + clocks = <&mcu_ccu CLK_BUS_MCU_I2S1>, <&mcu_ccu CLK_MCU_I2S1>; + clock-names = "apb", "mod"; + resets = <&mcu_ccu RST_BUS_MCU_I2S1>; + dmas = <&mcu_dma 4>, <&mcu_dma 4>; + dma-names = "rx", "tx"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s2: i2s@7114000 { + compatible = "allwinner,sun55i-a523-i2s", + "allwinner,sun50i-r329-i2s"; + reg = <0x07114000 0x1000>; + interrupts = ; + clocks = <&mcu_ccu CLK_BUS_MCU_I2S2>, <&mcu_ccu CLK_MCU_I2S2>; + clock-names = "apb", "mod"; + resets = <&mcu_ccu RST_BUS_MCU_I2S2>; + dmas = <&mcu_dma 5>, <&mcu_dma 5>; + dma-names = "rx", "tx"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s3: i2s@7115000 { + compatible = "allwinner,sun55i-a523-i2s", + "allwinner,sun50i-r329-i2s"; + reg = <0x07115000 0x1000>; + interrupts = ; + clocks = <&mcu_ccu CLK_BUS_MCU_I2S3>, <&mcu_ccu CLK_MCU_I2S3>; + clock-names = "apb", "mod"; + resets = <&mcu_ccu RST_BUS_MCU_I2S3>; + dmas = <&mcu_dma 6>, <&mcu_dma 6>; + dma-names = "rx", "tx"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + spdif: spdif@7116000 { + compatible = "allwinner,sun55i-a523-spdif"; + reg = <0x07116000 0x400>; + interrupts = ; + clocks = <&mcu_ccu CLK_BUS_MCU_SPDIF>, + <&mcu_ccu CLK_MCU_SPDIF_TX>, + <&mcu_ccu CLK_MCU_SPDIF_RX>; + clock-names = "apb", "tx", "rx"; + resets = <&mcu_ccu RST_BUS_MCU_SPDIF>; + dmas = <&mcu_dma 2>, <&mcu_dma 2>; + dma-names = "rx", "tx"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + mcu_dma: dma-controller@7121000 { + compatible = "allwinner,sun55i-a523-mcu-dma", + "allwinner,sun50i-a100-dma"; + reg = <0x07121000 0x1000>; + interrupts = ; + clocks = <&mcu_ccu CLK_BUS_MCU_DMA>, <&mcu_ccu CLK_MCU_MBUS_DMA>; + clock-names = "bus", "mbus"; + dma-channels = <16>; + dma-requests = <15>; + resets = <&mcu_ccu RST_BUS_MCU_DMA>; + #dma-cells = <1>; + }; + npu: npu@7122000 { compatible = "vivante,gc"; reg = <0x07122000 0x1000>; diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts b/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts index f82a8d12169789..bfdf1728cd14b6 100644 --- a/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts +++ b/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts @@ -14,6 +14,7 @@ / { aliases { ethernet0 = &gmac0; + ethernet1 = &gmac1; serial0 = &uart0; }; @@ -75,7 +76,7 @@ &ehci1 { &gmac0 { phy-mode = "rgmii-id"; - phy-handle = <&ext_rgmii_phy>; + phy-handle = <&ext_rgmii0_phy>; phy-supply = <®_cldo3>; allwinner,tx-delay-ps = <300>; @@ -84,13 +85,24 @@ &gmac0 { status = "okay"; }; +&gmac1 { + phy-mode = "rgmii-id"; + phy-handle = <&ext_rgmii1_phy>; + phy-supply = <®_cldo4>; + + tx-internal-delay-ps = <300>; + rx-internal-delay-ps = <400>; + + status = "okay"; +}; + &gpu { mali-supply = <®_dcdc2>; status = "okay"; }; &mdio0 { - ext_rgmii_phy: ethernet-phy@1 { + ext_rgmii0_phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; reset-gpios = <&pio 7 8 GPIO_ACTIVE_LOW>; /* PH8 */ @@ -99,6 +111,16 @@ ext_rgmii_phy: ethernet-phy@1 { }; }; +&mdio1 { + ext_rgmii1_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + reset-gpios = <&pio 9 16 GPIO_ACTIVE_LOW>; /* PJ16 */ + reset-assert-us = <10000>; + reset-deassert-us = <150000>; + }; +}; + &mmc0 { vmmc-supply = <®_cldo3>; cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */ @@ -250,6 +272,8 @@ reg_cldo4: cldo4 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc-pj-phy"; + /* enough time for the PHY to fully power on */ + regulator-enable-ramp-delay = <150000>; }; reg_cpusldo: cpusldo { diff --git a/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts b/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts index 1b054fa8ef74f1..054d0357c139f5 100644 --- a/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts +++ b/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts @@ -13,6 +13,7 @@ / { aliases { ethernet0 = &gmac0; + ethernet1 = &gmac1; serial0 = &uart0; }; @@ -73,7 +74,7 @@ &ehci1 { &gmac0 { phy-mode = "rgmii-id"; - phy-handle = <&ext_rgmii_phy>; + phy-handle = <&ext_rgmii0_phy>; phy-supply = <®_dcdc4>; allwinner,tx-delay-ps = <100>; @@ -82,13 +83,24 @@ &gmac0 { status = "okay"; }; +&gmac1 { + phy-mode = "rgmii-id"; + phy-handle = <&ext_rgmii1_phy>; + phy-supply = <®_dcdc4>; + + tx-internal-delay-ps = <100>; + rx-internal-delay-ps = <100>; + + status = "okay"; +}; + &gpu { mali-supply = <®_dcdc2>; status = "okay"; }; &mdio0 { - ext_rgmii_phy: ethernet-phy@1 { + ext_rgmii0_phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; reset-gpios = <&pio 7 8 GPIO_ACTIVE_LOW>; /* PH8 */ @@ -97,6 +109,16 @@ ext_rgmii_phy: ethernet-phy@1 { }; }; +&mdio1 { + ext_rgmii1_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + reset-gpios = <&pio 9 16 GPIO_ACTIVE_LOW>; /* PJ16 */ + reset-assert-us = <10000>; + reset-deassert-us = <150000>; + }; +}; + &mmc0 { vmmc-supply = <®_cldo3>; cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */ diff --git a/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts b/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts index 39a4e194712a28..9e6b21cf293ee7 100644 --- a/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts +++ b/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts @@ -15,6 +15,7 @@ / { compatible = "xunlong,orangepi-4a", "allwinner,sun55i-t527"; aliases { + ethernet0 = &gmac1; serial0 = &uart0; }; @@ -102,11 +103,33 @@ &ehci1 { status = "okay"; }; +&gmac1 { + phy-mode = "rgmii-id"; + phy-handle = <&ext_rgmii_phy>; + phy-supply = <®_cldo4>; + + tx-internal-delay-ps = <0>; + rx-internal-delay-ps = <300>; + + status = "okay"; +}; + &gpu { mali-supply = <®_dcdc2>; status = "okay"; }; +&mdio1 { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + interrupts-extended = <&pio 8 16 IRQ_TYPE_LEVEL_LOW>; /* PI16 */ + reset-gpios = <&pio 8 15 GPIO_ACTIVE_LOW>; /* PI15 */ + reset-assert-us = <10000>; + reset-deassert-us = <150000>; + }; +}; + &mmc0 { vmmc-supply = <®_cldo3>; cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */ diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index effd242f6bf709..657e986e5dba74 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -630,6 +630,15 @@ emac0-tx-ecc@ff8c0400 { interrupts = <5 4>; }; + sdmmca-ecc@ff8c8c00 { + compatible = "altr,socfpga-s10-sdmmc-ecc", + "altr,socfpga-sdmmc-ecc"; + reg = <0xff8c8c00 0x100>; + altr,ecc-parent = <&mmc>; + interrupts = <14 4>, + <15 4>; + }; + }; qspi: spi@ff8d2000 { diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index 4eee777ef1a149..58f776e411fc36 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -50,19 +50,6 @@ ref_033v: regulator-v-ref { regulator-min-microvolt = <330000>; regulator-max-microvolt = <330000>; }; - - soc@0 { - eccmgr { - sdmmca-ecc@ff8c8c00 { - compatible = "altr,socfpga-s10-sdmmc-ecc", - "altr,socfpga-sdmmc-ecc"; - reg = <0xff8c8c00 0x100>; - altr,ecc-parent = <&mmc>; - interrupts = <14 4>, - <15 4>; - }; - }; - }; }; &pinctrl0 { @@ -190,6 +177,8 @@ flash@0 { cdns,tsd2d-ns = <50>; cdns,tchsh-ns = <4>; cdns,tslch-ns = <4>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; partitions { compatible = "fixed-partitions"; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts index 7c53cb9621e574..92954c5beb5432 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts @@ -50,19 +50,6 @@ ref_033v: regulator-v-ref { regulator-min-microvolt = <330000>; regulator-max-microvolt = <330000>; }; - - soc@0 { - eccmgr { - sdmmca-ecc@ff8c8c00 { - compatible = "altr,socfpga-s10-sdmmc-ecc", - "altr,socfpga-sdmmc-ecc"; - reg = <0xff8c8c00 0x100>; - altr,ecc-parent = <&mmc>; - interrupts = <14 4>, - <15 4>; - }; - }; - }; }; &gpio1 { diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts index ad52e8a0b9ba42..5ba6ca4ef19a0d 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts @@ -62,7 +62,6 @@ &osc1 { &gmac0 { status = "okay"; phy-mode = "rgmii"; - phy-addr = <0xffffffff>; }; &gmac1 { @@ -73,7 +72,6 @@ &gmac1 { &gmac2 { status = "okay"; phy-mode = "rgmii"; - phy-addr = <0xffffffff>; }; &mmc { @@ -104,5 +102,4 @@ &usb1 { &sysmgr { reg = <0xffd12000 0x1000>; - interrupts = <0x0 0x10 0x4>; }; diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 619dce79b0204d..219fb088c704d0 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -80,6 +80,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-tx9-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-ugoos-am3.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi index b1da8cbaa25a18..2b12d8284594f4 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-a5.dtsi @@ -5,6 +5,7 @@ #include "amlogic-a4-common.dtsi" #include "amlogic-a5-reset.h" +#include #include / { cpus { @@ -58,6 +59,95 @@ reset: reset-controller@2000 { #reset-cells = <1>; }; + periphs_pinctrl: pinctrl@4000 { + compatible = "amlogic,pinctrl-a5", + "amlogic,pinctrl-a4"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x4000 0x0 0x300>; + + gpioz: gpio@c0 { + reg = <0x0 0xc0 0x0 0x40>, + <0x0 0x18 0x0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_Z<<8) 16>; + }; + + gpiox: gpio@100 { + reg = <0x0 0x100 0x0 0x40>, + <0x0 0xc 0x0 0xc>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_X<<8) 20>; + }; + + gpiot: gpio@140 { + reg = <0x0 0x140 0x0 0x40>, + <0x0 0x2c 0x0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_T<<8) 14>; + }; + + gpiod: gpio@180 { + reg = <0x0 0x180 0x0 0x40>, + <0x0 0x40 0x0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_D<<8) 16>; + }; + + gpioe: gpio@1c0 { + reg = <0x0 0x1c0 0x0 0x40>, + <0x0 0x48 0x0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_E<<8) 2>; + }; + + gpioc: gpio@200 { + reg = <0x0 0x200 0x0 0x40>, + <0x0 0x24 0x0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_C<<8) 11>; + }; + + gpiob: gpio@240 { + reg = <0x0 0x240 0x0 0x40>, + <0x0 0x0 0x0 0x8>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_B<<8) 14>; + }; + + gpioh: gpio@280 { + reg = <0x0 0x280 0x0 0x40>, + <0x0 0x4c 0x0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_H<<8) 5>; + }; + + gpio_test_n: gpio@2c0 { + reg = <0x0 0x2c0 0x0 0x40>, + <0x0 0x3c 0x0 0x4>; + reg-names = "gpio", "mux"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_TEST_N<<8) 1>; + }; + }; + gpio_intc: interrupt-controller@4080 { compatible = "amlogic,a5-gpio-intc", "amlogic,meson-gpio-intc"; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts index 45f8631f9feb6e..e026604c55e620 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts @@ -17,6 +17,7 @@ / { aliases { serial0 = &uart_b; spi0 = &spifc; + i2c2 = &i2c2; }; memory@0 { @@ -146,6 +147,36 @@ sdcard: regulator-sdcard { regulator-boot-on; regulator-always-on; }; + + camera_vdddo_1v8: regulator-camera-1v8 { + compatible = "regulator-fixed"; + regulator-name = "CAMERA_VDDDO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + camera_vdda_2v9: regulator-camera-2v9 { + compatible = "regulator-fixed"; + regulator-name = "CAMERA_VDDA"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + vin-supply = <&vcc_5v>; + regulator-boot-on; + regulator-always-on; + }; + + camera_vddd_1v2: regulator-camera-1v2 { + compatible = "regulator-fixed"; + regulator-name = "CAMERA_VDDD"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&vcc_3v3>; + regulator-boot-on; + regulator-always-on; + }; }; &uart_b { @@ -258,3 +289,56 @@ &sd { vmmc-supply = <&sdcard>; vqmmc-supply = <&sdcard>; }; + +&i2c2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins1>; + clock-frequency = <100000>; /* default 100k */ + + imx290: sensor0@1a { + compatible = "sony,imx290"; + reg = <0x1a>; + clocks = <&clkc_pll CLKID_MCLK0>; + clock-names = "xclk"; + clock-frequency = <37125000>; + assigned-clocks = <&clkc_pll CLKID_MCLK_PLL>, + <&clkc_pll CLKID_MCLK0>; + assigned-clock-rates = <74250000>, <37125000>; + + vdddo-supply = <&camera_vdddo_1v8>; + vdda-supply = <&camera_vdda_2v9>; + vddd-supply = <&camera_vddd_1v2>; + + reset-gpios = <&gpio GPIOE_4 GPIO_ACTIVE_LOW>; + + port { + imx290_out: endpoint { + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <222750000 148500000>; + remote-endpoint = <&c3_mipi_csi_in>; + }; + }; + }; +}; + +&csi2 { + status = "okay"; + + ports { + port@0 { + c3_mipi_csi_in: endpoint { + remote-endpoint = <&imx290_out>; + data-lanes = <1 2 3 4>; + }; + }; + }; +}; + +&adap { + status = "okay"; +}; + +&isp { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi index 07aaaf71ea9aed..13b7ac03f9b201 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi @@ -1031,5 +1031,93 @@ mdio0: mdio { #size-cells = <0>; }; }; + + csi2: csi2@ff018000 { + compatible = "amlogic,c3-mipi-csi2"; + reg = <0x0 0xff018000 0x0 0x100>, + <0x0 0xff019000 0x0 0x300>, + <0x0 0xff01a000 0x0 0x100>; + reg-names = "aphy", "dphy", "host"; + power-domains = <&pwrc PWRC_C3_MIPI_ISP_WRAP_ID>; + clocks = <&clkc_periphs CLKID_VAPB>, + <&clkc_periphs CLKID_CSI_PHY0>; + clock-names = "vapb", "phy0"; + assigned-clocks = <&clkc_periphs CLKID_VAPB>, + <&clkc_periphs CLKID_CSI_PHY0>; + assigned-clock-rates = <0>, <200000000>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + c3_mipi_csi_out: endpoint { + remote-endpoint = <&c3_adap_in>; + }; + }; + }; + }; + + adap: adap@ff010000 { + compatible = "amlogic,c3-mipi-adapter"; + reg = <0x0 0xff010000 0x0 0x100>, + <0x0 0xff01b000 0x0 0x100>, + <0x0 0xff01d000 0x0 0x200>; + reg-names = "top", "fd", "rd"; + power-domains = <&pwrc PWRC_C3_ISP_TOP_ID>; + clocks = <&clkc_periphs CLKID_VAPB>, + <&clkc_periphs CLKID_ISP0>; + clock-names = "vapb", "isp0"; + assigned-clocks = <&clkc_periphs CLKID_VAPB>, + <&clkc_periphs CLKID_ISP0>; + assigned-clock-rates = <0>, <400000000>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + c3_adap_in: endpoint { + remote-endpoint = <&c3_mipi_csi_out>; + }; + }; + + port@1 { + reg = <1>; + c3_adap_out: endpoint { + remote-endpoint = <&c3_isp_in>; + }; + }; + }; + }; + + isp: isp@ff000000 { + compatible = "amlogic,c3-isp"; + reg = <0x0 0xff000000 0x0 0xf000>; + reg-names = "isp"; + power-domains = <&pwrc PWRC_C3_ISP_TOP_ID>; + clocks = <&clkc_periphs CLKID_VAPB>, + <&clkc_periphs CLKID_ISP0>; + clock-names = "vapb", "isp0"; + assigned-clocks = <&clkc_periphs CLKID_VAPB>, + <&clkc_periphs CLKID_ISP0>; + assigned-clock-rates = <0>, <400000000>; + interrupts = ; + status = "disabled"; + + port { + c3_isp_in: endpoint { + remote-endpoint = <&c3_adap_out>; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi index 5f602f1170c001..8ef6319390331f 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-s6.dtsi @@ -7,6 +7,7 @@ #include #include #include +#include / { cpus { #address-cells = <2>; @@ -41,6 +42,15 @@ cpu3: cpu@300 { }; }; + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + + pwrc: power-controller { + compatible = "amlogic,s6-pwrc"; + #power-domain-cells = <1>; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = , @@ -189,6 +199,24 @@ gpiocc: gpio@300 { gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_CC<<8) 2>; }; }; + + gpio_intc: interrupt-controller@4080 { + compatible = "amlogic,s6-gpio-intc", + "amlogic,meson-gpio-intc"; + reg = <0x0 0x4080 0x0 0x20>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = + <10 11 12 13 14 15 16 17 18 19 20 21>; + }; + + ao-secure@10220 { + compatible = "amlogic,s6-ao-secure", + "amlogic,meson-gx-ao-secure", + "syscon"; + reg = <0x0 0x10220 0x0 0x140>; + amlogic,has-chip-id; + }; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi index d262c0b66e4b52..a3faf4d188e112 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi @@ -7,6 +7,7 @@ #include #include #include +#include / { cpus { @@ -79,6 +80,15 @@ l2: l2-cache0 { }; }; + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + + pwrc: power-controller { + compatible = "amlogic,s7-pwrc"; + #power-domain-cells = <1>; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = , @@ -211,6 +221,24 @@ gpiocc: gpio@300 { gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_CC<<8) 2>; }; }; + + gpio_intc: interrupt-controller@4080 { + compatible = "amlogic,s7-gpio-intc", + "amlogic,meson-gpio-intc"; + reg = <0x0 0x4080 0x0 0x20>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = + <10 11 12 13 14 15 16 17 18 19 20 21>; + }; + + ao-secure@10220 { + compatible = "amlogic,s7-ao-secure", + "amlogic,meson-gx-ao-secure", + "syscon"; + reg = <0x0 0x10220 0x0 0x140>; + amlogic,has-chip-id; + }; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi index c4d260d5bb5865..0c4417bcd68274 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-s7d.dtsi @@ -7,6 +7,7 @@ #include #include #include +#include / { cpus { @@ -43,6 +44,15 @@ cpu3: cpu@300 { }; + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + + pwrc: power-controller { + compatible = "amlogic,s7d-pwrc"; + #power-domain-cells = <1>; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = , @@ -184,6 +194,24 @@ gpiocc: gpio@300 { gpio-ranges = <&periphs_pinctrl 0 (AMLOGIC_GPIO_CC<<8) 2>; }; }; + + gpio_intc: interrupt-controller@4080 { + compatible = "amlogic,s7d-gpio-intc", + "amlogic,meson-gpio-intc"; + reg = <0x0 0x4080 0x0 0x20>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = + <10 11 12 13 14 15 16 17 18 19 20 21>; + }; + + ao-secure@10220 { + compatible = "amlogic,s7d-ao-secure", + "amlogic,meson-gx-ao-secure", + "syscon"; + reg = <0x0 0x10220 0x0 0x140>; + amlogic,has-chip-id; + }; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 04fb130ac7c6a4..e95c91894968b2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -208,7 +208,7 @@ pcieA: pcie@f9800000 { reg = <0x0 0xf9800000 0x0 0x400000>, <0x0 0xff646000 0x0 0x2000>, <0x0 0xf9f00000 0x0 0x100000>; - reg-names = "elbi", "cfg", "config"; + reg-names = "dbi", "cfg", "config"; interrupts = ; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; @@ -234,7 +234,7 @@ pcieB: pcie@fa000000 { reg = <0x0 0xfa000000 0x0 0x400000>, <0x0 0xff648000 0x0 0x2000>, <0x0 0xfa400000 0x0 0x100000>; - reg-names = "elbi", "cfg", "config"; + reg-names = "dbi", "cfg", "config"; interrupts = ; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index dcc927a9da8024..ca455f634834b5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -138,7 +138,7 @@ pcie: pcie@fc000000 { reg = <0x0 0xfc000000 0x0 0x400000>, <0x0 0xff648000 0x0 0x2000>, <0x0 0xfc400000 0x0 0x200000>; - reg-names = "elbi", "cfg", "config"; + reg-names = "dbi", "cfg", "config"; interrupts = ; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi index f04efa8282561c..23358d94844c94 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi @@ -87,7 +87,7 @@ cpu100: cpu@100 { i-cache-line-size = <32>; i-cache-size = <0x8000>; i-cache-sets = <32>; - next-level-cache = <&l2_cache_l>; + next-level-cache = <&l2_cache_b>; #cooling-cells = <2>; }; @@ -103,7 +103,7 @@ cpu101: cpu@101 { i-cache-line-size = <32>; i-cache-size = <0x8000>; i-cache-sets = <32>; - next-level-cache = <&l2_cache_l>; + next-level-cache = <&l2_cache_b>; #cooling-cells = <2>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-tx9-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-tx9-pro.dts new file mode 100644 index 00000000000000..9a62176cfe5a10 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-tx9-pro.dts @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione + */ + +/dts-v1/; + +#include "meson-gxm.dtsi" +#include "meson-gx-p23x-q20x.dtsi" +#include + +/ { + compatible = "oranth,tx9-pro", "amlogic,s912", "amlogic,meson-gxm"; + model = "Tanix TX9 Pro"; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "Update"; + linux,code = ; + press-threshold-microvolt = <10000>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + button { + label = "power"; + linux,code = ; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>; + pinctrl-names = "default"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; + phy-mode = "rgmii"; +}; + +&external_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_15 */ + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&ir { + linux,rc-map-name = "rc-tanix-tx3mini"; +}; + +&sd_emmc_a { + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index 83d45afc6588e1..01ecfa30418453 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -7,15 +7,13 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \ bcm2711-rpi-4-b.dtb \ bcm2711-rpi-cm4-io.dtb \ bcm2712-rpi-5-b.dtb \ - bcm2712-rpi-5-b-ovl-rp1.dtb \ bcm2712-d-rpi-5-b.dtb \ bcm2837-rpi-2-b.dtb \ bcm2837-rpi-3-a-plus.dtb \ bcm2837-rpi-3-b.dtb \ bcm2837-rpi-3-b-plus.dtb \ bcm2837-rpi-cm3-io3.dtb \ - bcm2837-rpi-zero-2-w.dtb \ - rp1.dtbo + bcm2837-rpi-zero-2-w.dtb subdir-y += bcmbca subdir-y += northstar2 diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-base.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-base.dtsi new file mode 100644 index 00000000000000..04738bf281ebda --- /dev/null +++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-base.dtsi @@ -0,0 +1,254 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/dts-v1/; + +#include +#include +#include "bcm2712.dtsi" + +/ { + compatible = "raspberrypi,5-model-b", "brcm,bcm2712"; + model = "Raspberry Pi 5"; + + aliases { + serial10 = &uart10; + }; + + chosen: chosen { + stdout-path = "serial10:115200n8"; + }; + + clk_rp1_xosc: clock-50000000 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "rp1-xosc"; + clock-frequency = <50000000>; + }; + + /* Will be filled by the bootloader */ + memory@0 { + device_type = "memory"; + reg = <0 0 0 0x28000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_button_default>; + status = "okay"; + + power_button: power-button { + label = "pwr_button"; + linux,code = ; + gpios = <&gio 20 GPIO_ACTIVE_LOW>; + debounce-interval = <50>; + }; + }; + + sd_io_1v8_reg: sd-io-1v8-reg { + compatible = "regulator-gpio"; + regulator-name = "vdd-sd-io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-settling-time-us = <5000>; + gpios = <&gio_aon 3 GPIO_ACTIVE_HIGH>; + states = <1800000 1>, + <3300000 0>; + }; + + sd_vcc_reg: sd-vcc-reg { + compatible = "regulator-fixed"; + regulator-name = "vcc-sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpios = <&gio_aon 4 GPIO_ACTIVE_HIGH>; + }; + + wl_on_reg: wl-on-reg { + compatible = "regulator-fixed"; + regulator-name = "wl-on-regulator"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-0 = <&wl_on_default>; + pinctrl-names = "default"; + gpio = <&gio 28 GPIO_ACTIVE_HIGH>; + startup-delay-us = <150000>; + enable-active-high; + }; +}; + +&pinctrl { + bt_shutdown_default: bt-shutdown-default-state { + function = "gpio"; + pins = "gpio29"; + }; + + emmc_sd_default: emmc-sd-default-state { + pins = "emmc_cmd", "emmc_dat0", "emmc_dat1", "emmc_dat2", "emmc_dat3"; + bias-pull-up; + }; + + pwr_button_default: pwr-button-default-state { + function = "gpio"; + pins = "gpio20"; + bias-pull-up; + }; + + sdio2_30_default: sdio2-30-default-state { + clk-pins { + function = "sd2"; + pins = "gpio30"; + bias-disable; + }; + cmd-pins { + function = "sd2"; + pins = "gpio31"; + bias-pull-up; + }; + dat-pins { + function = "sd2"; + pins = "gpio32", "gpio33", "gpio34", "gpio35"; + bias-pull-up; + }; + }; + + uarta_24_default: uarta-24-default-state { + rts-pins { + function = "uart0"; + pins = "gpio24"; + bias-disable; + }; + cts-pins { + function = "uart0"; + pins = "gpio25"; + bias-pull-up; + }; + txd-pins { + function = "uart0"; + pins = "gpio26"; + bias-disable; + }; + rxd-pins { + function = "uart0"; + pins = "gpio27"; + bias-pull-up; + }; + }; + + wl_on_default: wl-on-default-state { + function = "gpio"; + pins = "gpio28"; + }; +}; + +&pinctrl_aon { + emmc_aon_cd_default: emmc-aon-cd-default-state { + function = "sd_card_g"; + pins = "aon_gpio5"; + bias-pull-up; + }; +}; + +/* The Debug UART, on Rpi5 it's on JST-SH 1.0mm 3-pin connector + * labeled "UART", i.e. the interface with the system console. + */ +&uart10 { + status = "okay"; +}; + +/* SDIO1 is used to drive the SD card */ +&sdio1 { + pinctrl-0 = <&emmc_sd_default>, <&emmc_aon_cd_default>; + pinctrl-names = "default"; + vqmmc-supply = <&sd_io_1v8_reg>; + vmmc-supply = <&sd_vcc_reg>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-ddr50; + sd-uhs-sdr104; + cd-gpios = <&gio_aon 5 GPIO_ACTIVE_LOW>; +}; + +&sdio2 { + pinctrl-0 = <&sdio2_30_default>; + pinctrl-names = "default"; + bus-width = <4>; + vmmc-supply = <&wl_on_reg>; + sd-uhs-ddr50; + non-removable; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + wifi: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&soc { + firmware: firmware { + compatible = "raspberrypi,bcm2835-firmware", "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + + mboxes = <&mailbox>; + dma-ranges; + + firmware_clocks: clocks { + compatible = "raspberrypi,firmware-clocks"; + #clock-cells = <1>; + }; + + reset: reset { + compatible = "raspberrypi,firmware-reset"; + #reset-cells = <1>; + }; + }; + + power: power { + compatible = "raspberrypi,bcm2835-power"; + firmware = <&firmware>; + #power-domain-cells = <1>; + }; +}; + +/* uarta communicates with the BT module */ +&uarta { + uart-has-rtscts; + pinctrl-0 = <&uarta_24_default &bt_shutdown_default>; + pinctrl-names = "default"; + status = "okay"; + + bluetooth: bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <3000000>; + shutdown-gpios = <&gio 29 GPIO_ACTIVE_HIGH>; + }; +}; + +&hvs { + clocks = <&firmware_clocks 4>, <&firmware_clocks 16>; + clock-names = "core", "disp"; +}; + +&hdmi0 { + clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>; + clock-names = "hdmi", "bvb", "audio", "cec"; +}; + +&hdmi1 { + clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>; + clock-names = "hdmi", "bvb", "audio", "cec"; +}; + +&pcie1 { + status = "okay"; +}; + +&pcie2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts deleted file mode 100644 index 04738bf281ebda..00000000000000 --- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts +++ /dev/null @@ -1,254 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) -/dts-v1/; - -#include -#include -#include "bcm2712.dtsi" - -/ { - compatible = "raspberrypi,5-model-b", "brcm,bcm2712"; - model = "Raspberry Pi 5"; - - aliases { - serial10 = &uart10; - }; - - chosen: chosen { - stdout-path = "serial10:115200n8"; - }; - - clk_rp1_xosc: clock-50000000 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-output-names = "rp1-xosc"; - clock-frequency = <50000000>; - }; - - /* Will be filled by the bootloader */ - memory@0 { - device_type = "memory"; - reg = <0 0 0 0x28000000>; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pwr_button_default>; - status = "okay"; - - power_button: power-button { - label = "pwr_button"; - linux,code = ; - gpios = <&gio 20 GPIO_ACTIVE_LOW>; - debounce-interval = <50>; - }; - }; - - sd_io_1v8_reg: sd-io-1v8-reg { - compatible = "regulator-gpio"; - regulator-name = "vdd-sd-io"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - regulator-settling-time-us = <5000>; - gpios = <&gio_aon 3 GPIO_ACTIVE_HIGH>; - states = <1800000 1>, - <3300000 0>; - }; - - sd_vcc_reg: sd-vcc-reg { - compatible = "regulator-fixed"; - regulator-name = "vcc-sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - enable-active-high; - gpios = <&gio_aon 4 GPIO_ACTIVE_HIGH>; - }; - - wl_on_reg: wl-on-reg { - compatible = "regulator-fixed"; - regulator-name = "wl-on-regulator"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - pinctrl-0 = <&wl_on_default>; - pinctrl-names = "default"; - gpio = <&gio 28 GPIO_ACTIVE_HIGH>; - startup-delay-us = <150000>; - enable-active-high; - }; -}; - -&pinctrl { - bt_shutdown_default: bt-shutdown-default-state { - function = "gpio"; - pins = "gpio29"; - }; - - emmc_sd_default: emmc-sd-default-state { - pins = "emmc_cmd", "emmc_dat0", "emmc_dat1", "emmc_dat2", "emmc_dat3"; - bias-pull-up; - }; - - pwr_button_default: pwr-button-default-state { - function = "gpio"; - pins = "gpio20"; - bias-pull-up; - }; - - sdio2_30_default: sdio2-30-default-state { - clk-pins { - function = "sd2"; - pins = "gpio30"; - bias-disable; - }; - cmd-pins { - function = "sd2"; - pins = "gpio31"; - bias-pull-up; - }; - dat-pins { - function = "sd2"; - pins = "gpio32", "gpio33", "gpio34", "gpio35"; - bias-pull-up; - }; - }; - - uarta_24_default: uarta-24-default-state { - rts-pins { - function = "uart0"; - pins = "gpio24"; - bias-disable; - }; - cts-pins { - function = "uart0"; - pins = "gpio25"; - bias-pull-up; - }; - txd-pins { - function = "uart0"; - pins = "gpio26"; - bias-disable; - }; - rxd-pins { - function = "uart0"; - pins = "gpio27"; - bias-pull-up; - }; - }; - - wl_on_default: wl-on-default-state { - function = "gpio"; - pins = "gpio28"; - }; -}; - -&pinctrl_aon { - emmc_aon_cd_default: emmc-aon-cd-default-state { - function = "sd_card_g"; - pins = "aon_gpio5"; - bias-pull-up; - }; -}; - -/* The Debug UART, on Rpi5 it's on JST-SH 1.0mm 3-pin connector - * labeled "UART", i.e. the interface with the system console. - */ -&uart10 { - status = "okay"; -}; - -/* SDIO1 is used to drive the SD card */ -&sdio1 { - pinctrl-0 = <&emmc_sd_default>, <&emmc_aon_cd_default>; - pinctrl-names = "default"; - vqmmc-supply = <&sd_io_1v8_reg>; - vmmc-supply = <&sd_vcc_reg>; - bus-width = <4>; - sd-uhs-sdr50; - sd-uhs-ddr50; - sd-uhs-sdr104; - cd-gpios = <&gio_aon 5 GPIO_ACTIVE_LOW>; -}; - -&sdio2 { - pinctrl-0 = <&sdio2_30_default>; - pinctrl-names = "default"; - bus-width = <4>; - vmmc-supply = <&wl_on_reg>; - sd-uhs-ddr50; - non-removable; - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - wifi: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - -&soc { - firmware: firmware { - compatible = "raspberrypi,bcm2835-firmware", "simple-mfd"; - #address-cells = <1>; - #size-cells = <1>; - - mboxes = <&mailbox>; - dma-ranges; - - firmware_clocks: clocks { - compatible = "raspberrypi,firmware-clocks"; - #clock-cells = <1>; - }; - - reset: reset { - compatible = "raspberrypi,firmware-reset"; - #reset-cells = <1>; - }; - }; - - power: power { - compatible = "raspberrypi,bcm2835-power"; - firmware = <&firmware>; - #power-domain-cells = <1>; - }; -}; - -/* uarta communicates with the BT module */ -&uarta { - uart-has-rtscts; - pinctrl-0 = <&uarta_24_default &bt_shutdown_default>; - pinctrl-names = "default"; - status = "okay"; - - bluetooth: bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <3000000>; - shutdown-gpios = <&gio 29 GPIO_ACTIVE_HIGH>; - }; -}; - -&hvs { - clocks = <&firmware_clocks 4>, <&firmware_clocks 16>; - clock-names = "core", "disp"; -}; - -&hdmi0 { - clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>; - clock-names = "hdmi", "bvb", "audio", "cec"; -}; - -&hdmi1 { - clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>; - clock-names = "hdmi", "bvb", "audio", "cec"; -}; - -&pcie1 { - status = "okay"; -}; - -&pcie2 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts index 3e0319fdb93f7b..28560828144622 100644 --- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts +++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts @@ -1,22 +1,16 @@ // SPDX-License-Identifier: (GPL-2.0 OR MIT) /* - * bcm2712-rpi-5-b-ovl-rp1.dts is the overlay-ready DT which will make - * the RP1 driver to load the RP1 dtb overlay at runtime, while - * bcm2712-rpi-5-b.dts (this file) is the fully defined one (i.e. it - * already contains RP1 node, so no overlay is loaded nor needed). - * This file is intended to host the override nodes for the RP1 peripherals, - * e.g. to declare the phy of the ethernet interface or the custom pin setup - * for several RP1 peripherals. - * This in turn is due to the fact that there's no current generic - * infrastructure to reference nodes (i.e. the nodes in rp1-common.dtsi) that - * are not yet defined in the DT since they are loaded at runtime via overlay. + * As a loose attempt to separate RP1 customizations from SoC peripherals + * definitioni, this file is intended to host the override nodes for the RP1 + * peripherals, e.g. to declare the phy of the ethernet interface or custom + * pin setup. * All other nodes that do not have anything to do with RP1 should be added - * to the included bcm2712-rpi-5-b-ovl-rp1.dts instead. + * to the included bcm2712-rpi-5-b-base.dtsi instead. */ /dts-v1/; -#include "bcm2712-rpi-5-b-ovl-rp1.dts" +#include "bcm2712-rpi-5-b-base.dtsi" / { aliases { @@ -25,7 +19,26 @@ aliases { }; &pcie2 { - #include "rp1-nexus.dtsi" + pci@0,0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + ranges; + bus-range = <0 1>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + + dev@0,0 { + compatible = "pci1de4,1"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 0x0 0x82010000 0x0 0x0 0x0 0x400000>; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <3>; + #size-cells = <2>; + + #include "rp1-common.dtsi" + }; + }; }; &rp1_eth { diff --git a/arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi b/arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi deleted file mode 100644 index 0ef30d7f1c3521..00000000000000 --- a/arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi +++ /dev/null @@ -1,14 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) - -rp1_nexus { - compatible = "pci1de4,1"; - #address-cells = <3>; - #size-cells = <2>; - ranges = <0x01 0x00 0x00000000 - 0x02000000 0x00 0x00000000 - 0x0 0x400000>; - interrupt-controller; - #interrupt-cells = <2>; - - #include "rp1-common.dtsi" -}; diff --git a/arch/arm64/boot/dts/broadcom/rp1.dtso b/arch/arm64/boot/dts/broadcom/rp1.dtso deleted file mode 100644 index ab4f146d22c064..00000000000000 --- a/arch/arm64/boot/dts/broadcom/rp1.dtso +++ /dev/null @@ -1,11 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) - -/dts-v1/; -/plugin/; - -&pcie2 { - #address-cells = <3>; - #size-cells = <2>; - - #include "rp1-nexus.dtsi" -}; diff --git a/arch/arm64/boot/dts/bst/Makefile b/arch/arm64/boot/dts/bst/Makefile new file mode 100644 index 00000000000000..4c1b8b4cdad893 --- /dev/null +++ b/arch/arm64/boot/dts/bst/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_ARCH_BST) += bstc1200-cdcu1.0-adas_4c2g.dtb diff --git a/arch/arm64/boot/dts/bst/bstc1200-cdcu1.0-adas_4c2g.dts b/arch/arm64/boot/dts/bst/bstc1200-cdcu1.0-adas_4c2g.dts new file mode 100644 index 00000000000000..5eb9ef369d8c94 --- /dev/null +++ b/arch/arm64/boot/dts/bst/bstc1200-cdcu1.0-adas_4c2g.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "bstc1200.dtsi" + +/ { + model = "BST C1200-96 CDCU1.0 4C2G"; + compatible = "bst,c1200-cdcu1.0-adas-4c2g", "bst,c1200"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@810000000 { + device_type = "memory"; + reg = <0x8 0x10000000 0x0 0x30000000>, + <0x8 0xc0000000 0x1 0x0>, + <0xc 0x00000000 0x0 0x40000000>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/bst/bstc1200.dtsi b/arch/arm64/boot/dts/bst/bstc1200.dtsi new file mode 100644 index 00000000000000..dd13c6bfc3c89a --- /dev/null +++ b/arch/arm64/boot/dts/bst/bstc1200.dtsi @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include + +/ { + compatible = "bst,c1200"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a78"; + reg = <0x0>; + enable-method = "psci"; + next-level-cache = <&l2_cache>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a78"; + reg = <0x100>; + enable-method = "psci"; + next-level-cache = <&l2_cache>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a78"; + reg = <0x200>; + enable-method = "psci"; + next-level-cache = <&l2_cache>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a78"; + reg = <0x300>; + enable-method = "psci"; + next-level-cache = <&l2_cache>; + }; + + l2_cache: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + soc { + compatible = "simple-bus"; + ranges; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + + uart0: serial@20008000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x20008000 0x0 0x1000>; + clock-frequency = <25000000>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + gic: interrupt-controller@32800000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x32800000 0x0 0x10000>, + <0x0 0x32880000 0x0 0x100000>; + ranges; + #address-cells = <2>; + #size-cells = <2>; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = ; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + always-on; + interrupt-parent = <&gic>; + interrupts = , + , + , + ; + }; +}; diff --git a/arch/arm64/boot/dts/cix/sky1-orion-o6.dts b/arch/arm64/boot/dts/cix/sky1-orion-o6.dts index d74964d53c3bc2..4dee8cd0b86dac 100644 --- a/arch/arm64/boot/dts/cix/sky1-orion-o6.dts +++ b/arch/arm64/boot/dts/cix/sky1-orion-o6.dts @@ -7,6 +7,8 @@ /dts-v1/; #include "sky1.dtsi" +#include "sky1-pinfunc.h" + / { model = "Radxa Orion O6"; compatible = "radxa,orion-o6", "cix,sky1"; @@ -34,6 +36,56 @@ linux,cma { }; +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hog-cfg { + pins { + pinmux = , + , + , + ; + bias-pull-down; + drive-strength = <8>; + }; + }; +}; + +&iomuxc_s5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_s5>; + + pinctrl_hog_s5: hog-s5-cfg { + pins { + pinmux = ; + bias-pull-up; + drive-strength = <8>; + + }; + }; +}; + +&pcie_x8_rc { + status = "okay"; +}; + +&pcie_x4_rc { + status = "okay"; +}; + +&pcie_x2_rc { + status = "okay"; +}; + +&pcie_x1_0_rc { + status = "okay"; +}; + +&pcie_x1_1_rc { + status = "okay"; +}; + &uart2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/cix/sky1-pinfunc.h b/arch/arm64/boot/dts/cix/sky1-pinfunc.h new file mode 100644 index 00000000000000..ebe9f6fef40367 --- /dev/null +++ b/arch/arm64/boot/dts/cix/sky1-pinfunc.h @@ -0,0 +1,401 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright 2024-2025 Cix Technology Group Co., Ltd. + */ + +#ifndef __CIX_SKY1_H +#define __CIX_SKY1_H + +/* s5 pads */ +#define CIX_PAD_GPIO001_FUNC_GPIO001 (0 << 8 | 0x0) +#define CIX_PAD_GPIO002_FUNC_GPIO002 (1 << 8 | 0x0) +#define CIX_PAD_GPIO003_FUNC_GPIO003 (2 << 8 | 0x0) +#define CIX_PAD_GPIO004_FUNC_GPIO004 (3 << 8 | 0x0) +#define CIX_PAD_GPIO005_FUNC_GPIO005 (4 << 8 | 0x0) +#define CIX_PAD_GPIO006_FUNC_GPIO006 (5 << 8 | 0x0) +#define CIX_PAD_GPIO007_FUNC_GPIO007 (6 << 8 | 0x0) +#define CIX_PAD_GPIO008_FUNC_GPIO008 (7 << 8 | 0x0) +#define CIX_PAD_GPIO009_FUNC_GPIO009 (8 << 8 | 0x0) +#define CIX_PAD_GPIO010_FUNC_GPIO010 (9 << 8 | 0x0) +#define CIX_PAD_GPIO011_FUNC_GPIO011 (10 << 8 | 0x0) +#define CIX_PAD_GPIO012_FUNC_GPIO012 (11 << 8 | 0x0) +#define CIX_PAD_GPIO013_FUNC_GPIO013 (12 << 8 | 0x0) +#define CIX_PAD_GPIO014_FUNC_GPIO014 (13 << 8 | 0x0) +#define CIX_PAD_SFI_I2C0_SCL_FUNC_SFI_I2C0_SCL (28 << 8 | 0x0) +#define CIX_PAD_SFI_I2C0_SCL_FUNC_SFI_I3C0_SCL (28 << 8 | 0x1) +#define CIX_PAD_SFI_I2C0_SDA_FUNC_SFI_I2C0_SDA (29 << 8 | 0x0) +#define CIX_PAD_SFI_I2C0_SDA_FUNC_SFI_I3C0_SDA (29 << 8 | 0x1) +#define CIX_PAD_SFI_I2C1_SCL_FUNC_SFI_I2C1_SCL (30 << 8 | 0x0) +#define CIX_PAD_SFI_I2C1_SCL_FUNC_SFI_I3C1_SCL (30 << 8 | 0x1) +#define CIX_PAD_SFI_I2C1_SCL_FUNC_SFI_SPI_CS0 (30 << 8 | 0x2) +#define CIX_PAD_SFI_I2C1_SDA_FUNC_SFI_I2C1_SDA (31 << 8 | 0x0) +#define CIX_PAD_SFI_I2C1_SDA_FUNC_SFI_I3C1_SDA (31 << 8 | 0x1) +#define CIX_PAD_SFI_I2C1_SDA_FUNC_SFI_SPI_CS1 (31 << 8 | 0x2) +#define CIX_PAD_SFI_GPIO0_FUNC_GPIO015 (32 << 8 | 0x0) +#define CIX_PAD_SFI_GPIO0_FUNC_SFI_SPI_SCK (32 << 8 | 0x1) +#define CIX_PAD_SFI_GPIO0_FUNC_SFI_GPIO0 (32 << 8 | 0x2) +#define CIX_PAD_SFI_GPIO1_FUNC_GPIO016 (33 << 8 | 0x0) +#define CIX_PAD_SFI_GPIO1_FUNC_SFI_SPI_MOSI (33 << 8 | 0x1) +#define CIX_PAD_SFI_GPIO1_FUNC_SFI_GPIO1 (33 << 8 | 0x2) +#define CIX_PAD_SFI_GPIO2_FUNC_GPIO017 (34 << 8 | 0x0) +#define CIX_PAD_SFI_GPIO2_FUNC_SFI_SPI_MISO (34 << 8 | 0x1) +#define CIX_PAD_SFI_GPIO2_FUNC_SFI_GPIO2 (34 << 8 | 0x2) +#define CIX_PAD_GPIO018_FUNC_SFI_GPIO3 (35 << 8 | 0x0) +#define CIX_PAD_GPIO018_FUNC_GPIO018 (35 << 8 | 0x1) +#define CIX_PAD_GPIO019_FUNC_SFI_GPIO4 (36 << 8 | 0x0) +#define CIX_PAD_GPIO019_FUNC_GPIO019 (36 << 8 | 0x1) +#define CIX_PAD_GPIO020_FUNC_SFI_GPIO5 (37 << 8 | 0x0) +#define CIX_PAD_GPIO020_FUNC_GPIO020 (37 << 8 | 0x1) +#define CIX_PAD_GPIO021_FUNC_SFI_GPIO6 (38 << 8 | 0x0) +#define CIX_PAD_GPIO021_FUNC_GPIO021 (38 << 8 | 0x1) +#define CIX_PAD_GPIO022_FUNC_SFI_GPIO7 (39 << 8 | 0x0) +#define CIX_PAD_GPIO022_FUNC_GPIO022 (39 << 8 | 0x1) +#define CIX_PAD_GPIO023_FUNC_SFI_GPIO8 (40 << 8 | 0x0) +#define CIX_PAD_GPIO023_FUNC_GPIO023 (40 << 8 | 0x1) +#define CIX_PAD_GPIO023_FUNC_SFI_I3C0_PUR_EN_L (40 << 8 | 0x2) +#define CIX_PAD_GPIO024_FUNC_SFI_GPIO9 (41 << 8 | 0x0) +#define CIX_PAD_GPIO024_FUNC_GPIO024 (41 << 8 | 0x1) +#define CIX_PAD_GPIO024_FUNC_SFI_I3C1_PUR_EN_L (41 << 8 | 0x2) +#define CIX_PAD_SPI1_MISO_FUNC_SPI1_MISO (42 << 8 | 0x0) +#define CIX_PAD_SPI1_MISO_FUNC_GPIO025 (42 << 8 | 0x1) +#define CIX_PAD_SPI1_CS0_FUNC_SPI1_CS0 (43 << 8 | 0x0) +#define CIX_PAD_SPI1_CS0_FUNC_GPIO026 (43 << 8 | 0x1) +#define CIX_PAD_SPI1_CS1_FUNC_SPI1_CS1 (44 << 8 | 0x0) +#define CIX_PAD_SPI1_CS1_FUNC_GPIO027 (44 << 8 | 0x1) +#define CIX_PAD_SPI1_MOSI_FUNC_SPI1_MOSI (45 << 8 | 0x0) +#define CIX_PAD_SPI1_MOSI_FUNC_GPIO028 (45 << 8 | 0x1) +#define CIX_PAD_SPI1_CLK_FUNC_SPI1_CLK (46 << 8 | 0x0) +#define CIX_PAD_SPI1_CLK_FUNC_GPIO029 (46 << 8 | 0x1) +#define CIX_PAD_GPIO030_FUNC_GPIO030 (47 << 8 | 0x0) +#define CIX_PAD_GPIO030_FUNC_USB_OC0_L (47 << 8 | 0x1) +#define CIX_PAD_GPIO031_FUNC_GPIO031 (48 << 8 | 0x0) +#define CIX_PAD_GPIO031_FUNC_USB_OC1_L (48 << 8 | 0x1) +#define CIX_PAD_GPIO032_FUNC_GPIO032 (49 << 8 | 0x0) +#define CIX_PAD_GPIO032_FUNC_USB_OC2_L (49 << 8 | 0x1) +#define CIX_PAD_GPIO033_FUNC_GPIO033 (50 << 8 | 0x0) +#define CIX_PAD_GPIO033_FUNC_USB_OC3_L (50 << 8 | 0x1) +#define CIX_PAD_GPIO034_FUNC_GPIO034 (51 << 8 | 0x0) +#define CIX_PAD_GPIO034_FUNC_USB_OC4_L (51 << 8 | 0x1) +#define CIX_PAD_GPIO035_FUNC_GPIO035 (52 << 8 | 0x0) +#define CIX_PAD_GPIO035_FUNC_USB_OC5_L (52 << 8 | 0x1) +#define CIX_PAD_GPIO036_FUNC_GPIO036 (53 << 8 | 0x0) +#define CIX_PAD_GPIO036_FUNC_USB_OC6_L (53 << 8 | 0x1) +#define CIX_PAD_GPIO037_FUNC_GPIO037 (54 << 8 | 0x0) +#define CIX_PAD_GPIO037_FUNC_USB_OC7_L (54 << 8 | 0x1) +#define CIX_PAD_GPIO038_FUNC_GPIO038 (55 << 8 | 0x0) +#define CIX_PAD_GPIO038_FUNC_USB_OC8_L (55 << 8 | 0x1) +#define CIX_PAD_GPIO039_FUNC_GPIO039 (56 << 8 | 0x0) +#define CIX_PAD_GPIO039_FUNC_USB_OC9_L (56 << 8 | 0x1) +#define CIX_PAD_GPIO040_FUNC_GPIO040 (57 << 8 | 0x0) +#define CIX_PAD_GPIO040_FUNC_USB_DRIVE_VBUS0 (57 << 8 | 0x1) +#define CIX_PAD_GPIO041_FUNC_GPIO041 (58 << 8 | 0x0) +#define CIX_PAD_GPIO041_FUNC_USB_DRIVE_VBUS4 (58 << 8 | 0x1) +#define CIX_PAD_GPIO042_FUNC_GPIO042 (59 << 8 | 0x0) +#define CIX_PAD_GPIO042_FUNC_USB_DRIVE_VBUS5 (59 << 8 | 0x1) +#define CIX_PAD_SE_QSPI_CLK_FUNC_SE_QSPI_CLK (60 << 8 | 0x0) +#define CIX_PAD_SE_QSPI_CLK_FUNC_QSPI_CLK (60 << 8 | 0x1) +#define CIX_PAD_SE_QSPI_CS_L_FUNC_SE_QSPI_CS_L (61 << 8 | 0x0) +#define CIX_PAD_SE_QSPI_CS_L_FUNC_QSPI_CS_L (61 << 8 | 0x1) +#define CIX_PAD_SE_QSPI_DATA0_FUNC_SE_QSPI_DATA0 (62 << 8 | 0x0) +#define CIX_PAD_SE_QSPI_DATA0_FUNC_QSPI_DATA0 (62 << 8 | 0x1) +#define CIX_PAD_SE_QSPI_DATA1_FUNC_SE_QSPI_DATA1 (63 << 8 | 0x0) +#define CIX_PAD_SE_QSPI_DATA1_FUNC_QSPI_DATA1 (63 << 8 | 0x1) +#define CIX_PAD_SE_QSPI_DATA2_FUNC_SE_QSPI_DATA2 (64 << 8 | 0x0) +#define CIX_PAD_SE_QSPI_DATA2_FUNC_QSPI_DATA2 (64 << 8 | 0x1) +#define CIX_PAD_SE_QSPI_DATA3_FUNC_SE_QSPI_DATA3 (65 << 8 | 0x0) +#define CIX_PAD_SE_QSPI_DATA3_FUNC_QSPI_DATA3 (65 << 8 | 0x1) +/* s0 pads */ +#define CIX_PAD_GPIO043_FUNC_GPIO043 (0 << 8 | 0x0) +#define CIX_PAD_GPIO044_FUNC_GPIO044 (1 << 8 | 0x0) +#define CIX_PAD_GPIO045_FUNC_GPIO045 (2 << 8 | 0x0) +#define CIX_PAD_GPIO046_FUNC_GPIO046 (3 << 8 | 0x0) +#define CIX_PAD_DP2_DIGON_FUNC_DP2_DIGON (18 << 8 | 0x0) +#define CIX_PAD_DP2_BLON_FUNC_DP2_BLON (19 << 8 | 0x0) +#define CIX_PAD_DP2_VARY_BL_FUNC_DP2_VARY_BL (20 << 8 | 0x0) +#define CIX_PAD_I2C7_SCL_FUNC_I2C7_SCL (21 << 8 | 0x0) +#define CIX_PAD_I2C7_SDA_FUNC_I2C7_SDA (22 << 8 | 0x0) +#define CIX_PAD_I2C5_SCL_FUNC_I2C5_SCL (26 << 8 | 0x0) +#define CIX_PAD_I2C5_SCL_FUNC_GPIO047 (26 << 8 | 0x1) +#define CIX_PAD_I2C5_SDA_FUNC_I2C5_SDA (27 << 8 | 0x0) +#define CIX_PAD_I2C5_SDA_FUNC_GPIO048 (27 << 8 | 0x1) +#define CIX_PAD_I2C6_SCL_FUNC_I2C6_SCL (28 << 8 | 0x0) +#define CIX_PAD_I2C6_SCL_FUNC_GPIO049 (28 << 8 | 0x1) +#define CIX_PAD_I2C6_SDA_FUNC_I2C6_SDA (29 << 8 | 0x0) +#define CIX_PAD_I2C6_SDA_FUNC_GPIO050 (29 << 8 | 0x1) +#define CIX_PAD_I2C0_CLK_FUNC_I2C0_CLK (30 << 8 | 0x0) +#define CIX_PAD_I2C0_CLK_FUNC_GPIO051 (30 << 8 | 0x1) +#define CIX_PAD_I2C0_SDA_FUNC_I2C0_SDA (31 << 8 | 0x0) +#define CIX_PAD_I2C0_SDA_FUNC_GPIO052 (31 << 8 | 0x1) +#define CIX_PAD_I2C1_CLK_FUNC_I2C1_CLK (32 << 8 | 0x0) +#define CIX_PAD_I2C1_CLK_FUNC_GPIO053 (32 << 8 | 0x1) +#define CIX_PAD_I2C1_SDA_FUNC_I2C1_SDA (33 << 8 | 0x0) +#define CIX_PAD_I2C1_SDA_FUNC_GPIO054 (33 << 8 | 0x1) +#define CIX_PAD_I2C2_SCL_FUNC_I2C2_SCL (34 << 8 | 0x0) +#define CIX_PAD_I2C2_SCL_FUNC_I3C0_SCL (34 << 8 | 0x1) +#define CIX_PAD_I2C2_SCL_FUNC_GPIO055 (34 << 8 | 0x2) +#define CIX_PAD_I2C2_SDA_FUNC_I2C2_SDA (35 << 8 | 0x0) +#define CIX_PAD_I2C2_SDA_FUNC_I3C0_SDA (35 << 8 | 0x1) +#define CIX_PAD_I2C2_SDA_FUNC_GPIO056 (35 << 8 | 0x2) +#define CIX_PAD_GPIO057_FUNC_GPIO057 (36 << 8 | 0x0) +#define CIX_PAD_GPIO057_FUNC_I3C0_PUR_EN_L (36 << 8 | 0x1) +#define CIX_PAD_I2C3_CLK_FUNC_I2C3_CLK (37 << 8 | 0x0) +#define CIX_PAD_I2C3_CLK_FUNC_I3C1_CLK (37 << 8 | 0x1) +#define CIX_PAD_I2C3_CLK_FUNC_GPIO058 (37 << 8 | 0x2) +#define CIX_PAD_I2C3_SDA_FUNC_I2C3_SDA (38 << 8 | 0x0) +#define CIX_PAD_I2C3_SDA_FUNC_I3C1_SDA (38 << 8 | 0x1) +#define CIX_PAD_I2C3_SDA_FUNC_GPIO059 (38 << 8 | 0x2) +#define CIX_PAD_GPIO060_FUNC_GPIO060 (39 << 8 | 0x0) +#define CIX_PAD_GPIO060_FUNC_I3C1_PUR_EN_L (39 << 8 | 0x1) +#define CIX_PAD_I2C4_CLK_FUNC_I2C4_CLK (40 << 8 | 0x0) +#define CIX_PAD_I2C4_CLK_FUNC_GPIO061 (40 << 8 | 0x1) +#define CIX_PAD_I2C4_SDA_FUNC_I2C4_SDA (41 << 8 | 0x0) +#define CIX_PAD_I2C4_SDA_FUNC_GPIO062 (41 << 8 | 0x1) +#define CIX_PAD_HDA_BITCLK_FUNC_HDA_BITCLK (42 << 8 | 0x0) +#define CIX_PAD_HDA_BITCLK_FUNC_I2S0_SCK (42 << 8 | 0x1) +#define CIX_PAD_HDA_BITCLK_FUNC_I2S9_RSCK_DBG (42 << 8 | 0x2) +#define CIX_PAD_HDA_RST_L_FUNC_HDA_RST_L (43 << 8 | 0x0) +#define CIX_PAD_HDA_RST_L_FUNC_I2S0_DATA_IN (43 << 8 | 0x1) +#define CIX_PAD_HDA_RST_L_FUNC_I2S9_DATA_IN0_DBG (43 << 8 | 0x2) +#define CIX_PAD_HDA_SDIN0_FUNC_HDA_SDIN0 (44 << 8 | 0x0) +#define CIX_PAD_HDA_SDIN0_FUNC_I2S0_MCLK (44 << 8 | 0x1) +#define CIX_PAD_HDA_SDIN0_FUNC_I2S9_TSCK_DBG (44 << 8 | 0x2) +#define CIX_PAD_HDA_SDOUT0_FUNC_HDA_SDOUT0 (45 << 8 | 0x0) +#define CIX_PAD_HDA_SDOUT0_FUNC_I2S0_DATA_OUT (45 << 8 | 0x1) +#define CIX_PAD_HDA_SDOUT0_FUNC_I2S9_TWS_DBG (45 << 8 | 0x2) +#define CIX_PAD_HDA_SYNC_FUNC_HDA_SYNC (46 << 8 | 0x0) +#define CIX_PAD_HDA_SYNC_FUNC_I2S0_WS (46 << 8 | 0x1) +#define CIX_PAD_HDA_SYNC_FUNC_I2S9_RWS_DBG (46 << 8 | 0x2) +#define CIX_PAD_HDA_SDIN1_FUNC_HDA_SDIN1 (47 << 8 | 0x0) +#define CIX_PAD_HDA_SDIN1_FUNC_GPIO063 (47 << 8 | 0x1) +#define CIX_PAD_HDA_SDIN1_FUNC_I2S9_DATA_IN1_DBG (47 << 8 | 0x2) +#define CIX_PAD_HDA_SDOUT1_FUNC_HDA_SDOUT1 (48 << 8 | 0x0) +#define CIX_PAD_HDA_SDOUT1_FUNC_GPIO064 (48 << 8 | 0x1) +#define CIX_PAD_HDA_SDOUT1_FUNC_I2S9_DATA_OUT0_DBG (48 << 8 | 0x2) +#define CIX_PAD_I2S1_MCLK_FUNC_I2S1_MCLK (49 << 8 | 0x0) +#define CIX_PAD_I2S1_MCLK_FUNC_GPIO065 (49 << 8 | 0x1) +#define CIX_PAD_I2S1_SCK_FUNC_I2S1_SCK (50 << 8 | 0x0) +#define CIX_PAD_I2S1_SCK_FUNC_GPIO066 (50 << 8 | 0x1) +#define CIX_PAD_I2S1_WS_FUNC_I2S1_WS (51 << 8 | 0x0) +#define CIX_PAD_I2S1_WS_FUNC_GPIO067 (51 << 8 | 0x1) +#define CIX_PAD_I2S1_DATA_IN_FUNC_I2S1_DATA_IN (52 << 8 | 0x0) +#define CIX_PAD_I2S1_DATA_IN_FUNC_GPIO068 (52 << 8 | 0x1) +#define CIX_PAD_I2S1_DATA_OUT_FUNC_I2S1_DATA_OUT (53 << 8 | 0x0) +#define CIX_PAD_I2S1_DATA_OUT_FUNC_GPIO069 (53 << 8 | 0x1) +#define CIX_PAD_I2S2_MCLK_FUNC_I2S2_MCLK (54 << 8 | 0x0) +#define CIX_PAD_I2S2_MCLK_FUNC_GPIO070 (54 << 8 | 0x1) +#define CIX_PAD_I2S2_RSCK_FUNC_I2S2_RSCK (55 << 8 | 0x0) +#define CIX_PAD_I2S2_RSCK_FUNC_GPIO071 (55 << 8 | 0x1) +#define CIX_PAD_I2S2_RSCK_FUNC_I2S5_RSCK_DBG (55 << 8 | 0x2) +#define CIX_PAD_I2S2_RSCK_FUNC_I2S6_RSCK_DBG (55 << 8 | 0x3) +#define CIX_PAD_I2S2_RWS_FUNC_I2S2_RWS (56 << 8 | 0x0) +#define CIX_PAD_I2S2_RWS_FUNC_GPIO072 (56 << 8 | 0x1) +#define CIX_PAD_I2S2_RWS_FUNC_I2S5_RWS_DBG (56 << 8 | 0x2) +#define CIX_PAD_I2S2_RWS_FUNC_I2S6_RWS_DBG (56 << 8 | 0x3) +#define CIX_PAD_I2S2_TSCK_FUNC_I2S2_TSCK (57 << 8 | 0x0) +#define CIX_PAD_I2S2_TSCK_FUNC_GPIO073 (57 << 8 | 0x1) +#define CIX_PAD_I2S2_TSCK_FUNC_I2S5_TSCK_DBG (57 << 8 | 0x2) +#define CIX_PAD_I2S2_TSCK_FUNC_I2S6_TSCK_DBG (57 << 8 | 0x3) +#define CIX_PAD_I2S2_TWS_FUNC_I2S2_TWS (58 << 8 | 0x0) +#define CIX_PAD_I2S2_TWS_FUNC_GPIO074 (58 << 8 | 0x1) +#define CIX_PAD_I2S2_TWS_FUNC_I2S5_TWS_DBG (58 << 8 | 0x2) +#define CIX_PAD_I2S2_TWS_FUNC_I2S6_TWS_DBG (58 << 8 | 0x3) +#define CIX_PAD_I2S2_DATA_IN0_FUNC_I2S2_DATA_IN0 (59 << 8 | 0x0) +#define CIX_PAD_I2S2_DATA_IN0_FUNC_GPIO075 (59 << 8 | 0x1) +#define CIX_PAD_I2S2_DATA_IN0_FUNC_I2S5_DATA_IN0_DBG (59 << 8 | 0x2) +#define CIX_PAD_I2S2_DATA_IN0_FUNC_I2S6_DATA_IN0_DBG (59 << 8 | 0x3) +#define CIX_PAD_I2S2_DATA_IN1_FUNC_I2S2_DATA_IN1 (60 << 8 | 0x0) +#define CIX_PAD_I2S2_DATA_IN1_FUNC_GPIO076 (60 << 8 | 0x1) +#define CIX_PAD_I2S2_DATA_IN1_FUNC_I2S5_DATA_IN1_DBG (60 << 8 | 0x2) +#define CIX_PAD_I2S2_DATA_IN1_FUNC_I2S6_DATA_IN1_DBG (60 << 8 | 0x3) +#define CIX_PAD_I2S2_DATA_OUT0_FUNC_I2S2_DATA_OUT0 (61 << 8 | 0x0) +#define CIX_PAD_I2S2_DATA_OUT0_FUNC_GPIO077 (61 << 8 | 0x1) +#define CIX_PAD_I2S2_DATA_OUT0_FUNC_I2S5_DATA_OUT0_DBG (61 << 8 | 0x2) +#define CIX_PAD_I2S2_DATA_OUT0_FUNC_I2S6_DATA_OUT0_DBG (61 << 8 | 0x3) +#define CIX_PAD_I2S2_DATA_OUT1_FUNC_I2S2_DATA_OUT1 (62 << 8 | 0x0) +#define CIX_PAD_I2S2_DATA_OUT1_FUNC_GPIO078 (62 << 8 | 0x1) +#define CIX_PAD_I2S2_DATA_OUT1_FUNC_I2S5_DATA_OUT1_DBG (62 << 8 | 0x2) +#define CIX_PAD_I2S2_DATA_OUT1_FUNC_I2S6_DATA_OUT1_DBG (62 << 8 | 0x3) +#define CIX_PAD_I2S2_DATA_OUT2_FUNC_I2S2_DATA_OUT2 (63 << 8 | 0x0) +#define CIX_PAD_I2S2_DATA_OUT2_FUNC_GPIO079 (63 << 8 | 0x1) +#define CIX_PAD_I2S2_DATA_OUT3_FUNC_I2S2_DATA_OUT3 (64 << 8 | 0x0) +#define CIX_PAD_I2S2_DATA_OUT3_FUNC_GPIO080 (64 << 8 | 0x1) +#define CIX_PAD_I2S2_DATA_OUT3_FUNC_I2S9_DATA_OUT1_DBG (64 << 8 | 0x2) +#define CIX_PAD_I2S3_MCLK_FUNC_I2S3_MCLK (65 << 8 | 0x0) +#define CIX_PAD_I2S3_MCLK_FUNC_GPIO081 (65 << 8 | 0x1) +#define CIX_PAD_I2S3_RSCK_FUNC_I2S3_RSCK (66 << 8 | 0x0) +#define CIX_PAD_I2S3_RSCK_FUNC_GPIO082 (66 << 8 | 0x1) +#define CIX_PAD_I2S3_RSCK_FUNC_I2S7_RSCK_DBG (66 << 8 | 0x2) +#define CIX_PAD_I2S3_RSCK_FUNC_I2S8_RSCK_DBG (66 << 8 | 0x3) +#define CIX_PAD_I2S3_RWS_FUNC_I2S3_RWS (67 << 8 | 0x0) +#define CIX_PAD_I2S3_RWS_FUNC_GPIO083 (67 << 8 | 0x1) +#define CIX_PAD_I2S3_RWS_FUNC_I2S7_RWS_DBG (67 << 8 | 0x2) +#define CIX_PAD_I2S3_RWS_FUNC_I2S8_RWS_DBG (67 << 8 | 0x3) +#define CIX_PAD_I2S3_TSCK_FUNC_I2S3_TSCK (68 << 8 | 0x0) +#define CIX_PAD_I2S3_TSCK_FUNC_GPIO084 (68 << 8 | 0x1) +#define CIX_PAD_I2S3_TSCK_FUNC_I2S7_TSCK_DBG (68 << 8 | 0x2) +#define CIX_PAD_I2S3_TSCK_FUNC_I2S8_TSCK_DBG (68 << 8 | 0x3) +#define CIX_PAD_I2S3_TWS_FUNC_I2S3_TWS (69 << 8 | 0x0) +#define CIX_PAD_I2S3_TWS_FUNC_GPIO085 (69 << 8 | 0x1) +#define CIX_PAD_I2S3_TWS_FUNC_I2S7_TWS_DBG (69 << 8 | 0x2) +#define CIX_PAD_I2S3_TWS_FUNC_I2S8_TWS_DBG (69 << 8 | 0x3) +#define CIX_PAD_I2S3_DATA_IN0_FUNC_I2S3_DATA_IN0 (70 << 8 | 0x0) +#define CIX_PAD_I2S3_DATA_IN0_FUNC_GPIO086 (70 << 8 | 0x1) +#define CIX_PAD_I2S3_DATA_IN0_FUNC_I2S7_DATA_IN0_DBG (70 << 8 | 0x2) +#define CIX_PAD_I2S3_DATA_IN0_FUNC_I2S8_DATA_IN0_DBG (70 << 8 | 0x3) +#define CIX_PAD_I2S3_DATA_IN1_FUNC_I2S3_DATA_IN1 (71 << 8 | 0x0) +#define CIX_PAD_I2S3_DATA_IN1_FUNC_GPIO087 (71 << 8 | 0x1) +#define CIX_PAD_I2S3_DATA_IN1_FUNC_I2S7_DATA_IN1_DBG (71 << 8 | 0x2) +#define CIX_PAD_I2S3_DATA_IN1_FUNC_I2S8_DATA_IN1_DBG (71 << 8 | 0x3) +#define CIX_PAD_I2S3_DATA_OUT0_FUNC_I2S3_DATA_OUT0 (72 << 8 | 0x0) +#define CIX_PAD_I2S3_DATA_OUT0_FUNC_GPIO088 (72 << 8 | 0x1) +#define CIX_PAD_I2S3_DATA_OUT0_FUNC_I2S7_DATA_OUT0_DBG (72 << 8 | 0x2) +#define CIX_PAD_I2S3_DATA_OUT0_FUNC_I2S8_DATA_OUT0_DBG (72 << 8 | 0x3) +#define CIX_PAD_I2S3_DATA_OUT1_FUNC_I2S3_DATA_OUT1 (73 << 8 | 0x0) +#define CIX_PAD_I2S3_DATA_OUT1_FUNC_GPIO089 (73 << 8 | 0x1) +#define CIX_PAD_I2S3_DATA_OUT1_FUNC_I2S7_DATA_OUT1_DBG (73 << 8 | 0x2) +#define CIX_PAD_I2S3_DATA_OUT1_FUNC_I2S8_DATA_OUT1_DBG (73 << 8 | 0x3) +#define CIX_PAD_GPIO090_FUNC_GPIO090 (74 << 8 | 0x0) +#define CIX_PAD_GPIO090_FUNC_I2S4_MCLK_LB (74 << 8 | 0x1) +#define CIX_PAD_GPIO091_FUNC_GPIO091 (75 << 8 | 0x0) +#define CIX_PAD_GPIO091_FUNC_I2S4_SCK_LB (75 << 8 | 0x1) +#define CIX_PAD_GPIO092_FUNC_GPIO092 (76 << 8 | 0x0) +#define CIX_PAD_GPIO092_FUNC_I2S4_WS_LB (76 << 8 | 0x1) +#define CIX_PAD_GPIO093_FUNC_GPIO093 (77 << 8 | 0x0) +#define CIX_PAD_GPIO093_FUNC_I2S4_DATA_IN_LB (77 << 8 | 0x1) +#define CIX_PAD_GPIO094_FUNC_GPIO094 (78 << 8 | 0x0) +#define CIX_PAD_GPIO094_FUNC_I2S4_DATA_OUT_LB (78 << 8 | 0x1) +#define CIX_PAD_UART0_TXD_FUNC_UART0_TXD (79 << 8 | 0x0) +#define CIX_PAD_UART0_TXD_FUNC_PWM0 (79 << 8 | 0x1) +#define CIX_PAD_UART0_TXD_FUNC_GPIO095 (79 << 8 | 0x2) +#define CIX_PAD_UART0_RXD_FUNC_UART0_RXD (80 << 8 | 0x0) +#define CIX_PAD_UART0_RXD_FUNC_PWM1 (80 << 8 | 0x1) +#define CIX_PAD_UART0_RXD_FUNC_GPIO096 (80 << 8 | 0x2) +#define CIX_PAD_UART0_CTS_FUNC_UART0_CTS (81 << 8 | 0x0) +#define CIX_PAD_UART0_CTS_FUNC_FAN_OUT2 (81 << 8 | 0x1) +#define CIX_PAD_UART0_CTS_FUNC_GPIO097 (81 << 8 | 0x2) +#define CIX_PAD_UART0_RTS_FUNC_UART0_RTS (82 << 8 | 0x0) +#define CIX_PAD_UART0_RTS_FUNC_FAN_TACH2 (82 << 8 | 0x1) +#define CIX_PAD_UART0_RTS_FUNC_GPIO098 (82 << 8 | 0x2) +#define CIX_PAD_UART1_TXD_FUNC_UART1_TXD (83 << 8 | 0x0) +#define CIX_PAD_UART1_TXD_FUNC_FAN_OUT0 (83 << 8 | 0x1) +#define CIX_PAD_UART1_TXD_FUNC_GPIO099 (83 << 8 | 0x2) +#define CIX_PAD_UART1_RXD_FUNC_UART1_RXD (84 << 8 | 0x0) +#define CIX_PAD_UART1_RXD_FUNC_FAN_TACH0 (84 << 8 | 0x1) +#define CIX_PAD_UART1_RXD_FUNC_GPIO100 (84 << 8 | 0x2) +#define CIX_PAD_UART1_CTS_FUNC_UART1_CTS (85 << 8 | 0x0) +#define CIX_PAD_UART1_CTS_FUNC_FAN_OUT1 (85 << 8 | 0x1) +#define CIX_PAD_UART1_CTS_FUNC_GPIO101 (85 << 8 | 0x2) +#define CIX_PAD_UART1_RTS_FUNC_UART1_RTS (86 << 8 | 0x0) +#define CIX_PAD_UART1_RTS_FUNC_FAN_TACH1 (86 << 8 | 0x1) +#define CIX_PAD_UART1_RTS_FUNC_GPIO102 (86 << 8 | 0x2) +#define CIX_PAD_UART2_TXD_FUNC_UART2_TXD (87 << 8 | 0x0) +#define CIX_PAD_UART2_TXD_FUNC_GPIO103 (87 << 8 | 0x1) +#define CIX_PAD_UART2_RXD_FUNC_UART2_RXD (88 << 8 | 0x0) +#define CIX_PAD_UART2_RXD_FUNC_GPIO104 (88 << 8 | 0x1) +#define CIX_PAD_UART3_TXD_FUNC_UART3_TXD (89 << 8 | 0x0) +#define CIX_PAD_UART3_TXD_FUNC_GPIO105 (89 << 8 | 0x1) +#define CIX_PAD_UART3_RXD_FUNC_UART3_RXD (90 << 8 | 0x0) +#define CIX_PAD_UART3_RXD_FUNC_GPIO106 (90 << 8 | 0x1) +#define CIX_PAD_UART3_CTS_FUNC_UART3_CTS (91 << 8 | 0x0) +#define CIX_PAD_UART3_CTS_FUNC_GPIO107 (91 << 8 | 0x1) +#define CIX_PAD_UART3_CTS_FUNC_TRIGIN0 (91 << 8 | 0x2) +#define CIX_PAD_UART3_RTS_FUNC_UART3_RTS (92 << 8 | 0x0) +#define CIX_PAD_UART3_RTS_FUNC_GPIO108 (92 << 8 | 0x1) +#define CIX_PAD_UART3_RTS_FUNC_TRIGIN1 (92 << 8 | 0x2) +#define CIX_PAD_UART4_CSU_PM_TXD_FUNC_UART4_CSU_PM_TXD (93 << 8 | 0x0) +#define CIX_PAD_UART4_CSU_PM_TXD_FUNC_GPIO109 (93 << 8 | 0x1) +#define CIX_PAD_UART4_CSU_PM_RXD_FUNC_UART4_CSU_PM_RXD (94 << 8 | 0x0) +#define CIX_PAD_UART4_CSU_PM_RXD_FUNC_GPIO110 (94 << 8 | 0x1) +#define CIX_PAD_UART5_CSU_SE_TXD_FUNC_UART5_CSU_SE_TXD (95 << 8 | 0x0) +#define CIX_PAD_UART5_CSU_SE_TXD_FUNC_GPIO111 (95 << 8 | 0x1) +#define CIX_PAD_UART5_CSU_SE_RXD_FUNC_UART5_CSU_SE_RXD (96 << 8 | 0x0) +#define CIX_PAD_UART5_CSU_SE_RXD_FUNC_GPIO112 (96 << 8 | 0x1) +#define CIX_PAD_UART6_CSU_SE_RXD_FUNC_UART6_CSU_SE_RXD (97 << 8 | 0x0) +#define CIX_PAD_UART6_CSU_SE_RXD_FUNC_GPIO113 (97 << 8 | 0x1) +#define CIX_PAD_CLK_REQ0_L_FUNC_CLK_REQ0_L (98 << 8 | 0x0) +#define CIX_PAD_CLK_REQ0_L_FUNC_GPIO114 (98 << 8 | 0x1) +#define CIX_PAD_CLK_REQ2_L_FUNC_CLK_REQ2_L (99 << 8 | 0x0) +#define CIX_PAD_CLK_REQ2_L_FUNC_GPIO115 (99 << 8 | 0x1) +#define CIX_PAD_CLK_REQ4_L_FUNC_CLK_REQ4_L (100 << 8 | 0x0) +#define CIX_PAD_CLK_REQ4_L_FUNC_GPIO116 (100 << 8 | 0x1) +#define CIX_PAD_CSI0_MCLK0_FUNC_CSI0_MCLK0 (101 << 8 | 0x0) +#define CIX_PAD_CSI0_MCLK0_FUNC_GPIO117 (101 << 8 | 0x1) +#define CIX_PAD_CSI0_MCLK1_FUNC_CSI0_MCLK1 (102 << 8 | 0x0) +#define CIX_PAD_CSI0_MCLK1_FUNC_GPIO118 (102 << 8 | 0x1) +#define CIX_PAD_CSI1_MCLK0_FUNC_CSI1_MCLK0 (103 << 8 | 0x0) +#define CIX_PAD_CSI1_MCLK0_FUNC_GPIO119 (103 << 8 | 0x1) +#define CIX_PAD_CSI1_MCLK1_FUNC_CSI1_MCLK1 (104 << 8 | 0x0) +#define CIX_PAD_CSI1_MCLK1_FUNC_GPIO120 (104 << 8 | 0x1) +#define CIX_PAD_GPIO121_FUNC_GPIO121 (105 << 8 | 0x0) +#define CIX_PAD_GPIO121_FUNC_GMAC0_REFCLK_25M (105 << 8 | 0x1) +#define CIX_PAD_GPIO122_FUNC_GPIO122 (106 << 8 | 0x0) +#define CIX_PAD_GPIO122_FUNC_GMAC0_TX_CTL (106 << 8 | 0x1) +#define CIX_PAD_GPIO123_FUNC_GPIO123 (107 << 8 | 0x0) +#define CIX_PAD_GPIO123_FUNC_GMAC0_TXD0 (107 << 8 | 0x1) +#define CIX_PAD_GPIO124_FUNC_GPIO124 (108 << 8 | 0x0) +#define CIX_PAD_GPIO124_FUNC_GMAC0_TXD1 (108 << 8 | 0x1) +#define CIX_PAD_GPIO125_FUNC_GPIO125 (109 << 8 | 0x0) +#define CIX_PAD_GPIO125_FUNC_GMAC0_TXD2 (109 << 8 | 0x1) +#define CIX_PAD_GPIO126_FUNC_GPIO126 (110 << 8 | 0x0) +#define CIX_PAD_GPIO126_FUNC_GMAC0_TXD3 (110 << 8 | 0x1) +#define CIX_PAD_GPIO127_FUNC_GPIO127 (111 << 8 | 0x0) +#define CIX_PAD_GPIO127_FUNC_GMAC0_TX_CLK (111 << 8 | 0x1) +#define CIX_PAD_GPIO128_FUNC_GPIO128 (112 << 8 | 0x0) +#define CIX_PAD_GPIO128_FUNC_GMAC0_RX_CTL (112 << 8 | 0x1) +#define CIX_PAD_GPIO129_FUNC_GPIO129 (113 << 8 | 0x0) +#define CIX_PAD_GPIO129_FUNC_GMAC0_RXD0 (113 << 8 | 0x1) +#define CIX_PAD_GPIO130_FUNC_GPIO130 (114 << 8 | 0x0) +#define CIX_PAD_GPIO130_FUNC_GMAC0_RXD1 (114 << 8 | 0x1) +#define CIX_PAD_GPIO131_FUNC_GPIO131 (115 << 8 | 0x0) +#define CIX_PAD_GPIO131_FUNC_GMAC0_RXD2 (115 << 8 | 0x1) +#define CIX_PAD_GPIO132_FUNC_GPIO132 (116 << 8 | 0x0) +#define CIX_PAD_GPIO132_FUNC_GMAC0_RXD3 (116 << 8 | 0x1) +#define CIX_PAD_GPIO133_FUNC_GPIO133 (117 << 8 | 0x0) +#define CIX_PAD_GPIO133_FUNC_GMAC0_RX_CLK (117 << 8 | 0x1) +#define CIX_PAD_GPIO134_FUNC_GPIO134 (118 << 8 | 0x0) +#define CIX_PAD_GPIO134_FUNC_GMAC0_MDC (118 << 8 | 0x1) +#define CIX_PAD_GPIO135_FUNC_GPIO135 (119 << 8 | 0x0) +#define CIX_PAD_GPIO135_FUNC_GMAC0_MDIO (119 << 8 | 0x1) +#define CIX_PAD_GPIO136_FUNC_GPIO136 (120 << 8 | 0x0) +#define CIX_PAD_GPIO136_FUNC_GMAC1_REFCLK_25M (120 << 8 | 0x1) +#define CIX_PAD_GPIO137_FUNC_GPIO137 (121 << 8 | 0x0) +#define CIX_PAD_GPIO137_FUNC_GMAC1_TX_CTL (121 << 8 | 0x1) +#define CIX_PAD_GPIO138_FUNC_GPIO138 (122 << 8 | 0x0) +#define CIX_PAD_GPIO138_FUNC_GMAC1_TXD0 (122 << 8 | 0x1) +#define CIX_PAD_GPIO138_FUNC_SPI2_MISO (122 << 8 | 0x2) +#define CIX_PAD_GPIO139_FUNC_GPIO139 (123 << 8 | 0x0) +#define CIX_PAD_GPIO139_FUNC_GMAC1_TXD1 (123 << 8 | 0x1) +#define CIX_PAD_GPIO139_FUNC_SPI2_CS0 (123 << 8 | 0x2) +#define CIX_PAD_GPIO140_FUNC_GPIO140 (124 << 8 | 0x0) +#define CIX_PAD_GPIO140_FUNC_GMAC1_TXD2 (124 << 8 | 0x1) +#define CIX_PAD_GPIO140_FUNC_SPI2_CS1 (124 << 8 | 0x2) +#define CIX_PAD_GPIO141_FUNC_GPIO141 (125 << 8 | 0x0) +#define CIX_PAD_GPIO141_FUNC_GMAC1_TXD3 (125 << 8 | 0x1) +#define CIX_PAD_GPIO141_FUNC_SPI2_MOSI (125 << 8 | 0x2) +#define CIX_PAD_GPIO142_FUNC_GPIO142 (126 << 8 | 0x0) +#define CIX_PAD_GPIO142_FUNC_GMAC1_TX_CLK (126 << 8 | 0x1) +#define CIX_PAD_GPIO142_FUNC_SPI2_CLK (126 << 8 | 0x2) +#define CIX_PAD_GPIO143_FUNC_GPIO143 (127 << 8 | 0x0) +#define CIX_PAD_GPIO143_FUNC_GMAC1_RX_CTL (127 << 8 | 0x1) +#define CIX_PAD_GPIO144_FUNC_GPIO144 (128 << 8 | 0x0) +#define CIX_PAD_GPIO144_FUNC_GMAC1_RXD0 (128 << 8 | 0x1) +#define CIX_PAD_GPIO145_FUNC_GPIO145 (129 << 8 | 0x0) +#define CIX_PAD_GPIO145_FUNC_GMAC1_RXD1 (129 << 8 | 0x1) +#define CIX_PAD_GPIO146_FUNC_GPIO146 (130 << 8 | 0x0) +#define CIX_PAD_GPIO146_FUNC_GMAC1_RXD2 (130 << 8 | 0x1) +#define CIX_PAD_GPIO147_FUNC_GPIO147 (131 << 8 | 0x0) +#define CIX_PAD_GPIO147_FUNC_GMAC1_RXD3 (131 << 8 | 0x1) +#define CIX_PAD_GPIO148_FUNC_GPIO148 (132 << 8 | 0x0) +#define CIX_PAD_GPIO148_FUNC_GMAC1_RX_CLK (132 << 8 | 0x1) +#define CIX_PAD_GPIO149_FUNC_GPIO149 (133 << 8 | 0x0) +#define CIX_PAD_GPIO149_FUNC_GMAC1_MDC (133 << 8 | 0x1) +#define CIX_PAD_GPIO150_FUNC_GPIO150 (134 << 8 | 0x0) +#define CIX_PAD_GPIO150_FUNC_GMAC1_MDIO (134 << 8 | 0x1) +#define CIX_PAD_GPIO151_FUNC_GPIO151 (135 << 8 | 0x0) +#define CIX_PAD_GPIO151_FUNC_PM_GPIO0 (135 << 8 | 0x1) +#define CIX_PAD_GPIO152_FUNC_GPIO152 (136 << 8 | 0x0) +#define CIX_PAD_GPIO152_FUNC_PM_GPIO1 (136 << 8 | 0x1) +#define CIX_PAD_GPIO153_FUNC_GPIO153 (137 << 8 | 0x0) +#define CIX_PAD_GPIO153_FUNC_PM_GPIO2 (137 << 8 | 0x1) + +#endif diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi index 2fb2c99c0796d4..64b76905cbff5e 100644 --- a/arch/arm64/boot/dts/cix/sky1.dtsi +++ b/arch/arm64/boot/dts/cix/sky1.dtsi @@ -264,6 +264,26 @@ i2c7: i2c@4080000 { status = "disabled"; }; + spi0: spi@4090000 { + compatible = "cix,sky1-spi-r1p6", "cdns,spi-r1p6"; + reg = <0x0 0x04090000 0x0 0x10000>; + clocks = <&scmi_clk CLK_TREE_FCH_SPI0_APB>, + <&scmi_clk CLK_TREE_FCH_SPI0_APB>; + clock-names = "ref_clk", "pclk"; + interrupts = ; + status = "disabled"; + }; + + spi1: spi@40a0000 { + compatible = "cix,sky1-spi-r1p6", "cdns,spi-r1p6"; + reg = <0x0 0x040a0000 0x0 0x10000>; + clocks = <&scmi_clk CLK_TREE_FCH_SPI1_APB>, + <&scmi_clk CLK_TREE_FCH_SPI1_APB>; + clock-names = "ref_clk", "pclk"; + interrupts = ; + status = "disabled"; + }; + uart0: serial@40b0000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0x040b0000 0x0 0x1000>; @@ -328,6 +348,11 @@ i3c1: i3c@4100000 { status = "disabled"; }; + iomuxc: pinctrl@4170000 { + compatible = "cix,sky1-pinctrl"; + reg = <0x0 0x04170000 0x0 0x1000>; + }; + mbox_ap2se: mailbox@5060000 { compatible = "cix,sky1-mbox"; reg = <0x0 0x05060000 0x0 0x10000>; @@ -388,6 +413,132 @@ mbox_ap2sfh: mailbox@80a0000 { cix,mbox-dir = "tx"; }; + pcie_x8_rc: pcie@a010000 { + compatible = "cix,sky1-pcie-host"; + reg = <0x00 0x0a010000 0x00 0x10000>, + <0x00 0x2c000000 0x00 0x4000000>, + <0x00 0x0a000300 0x00 0x100>, + <0x00 0x0a000400 0x00 0x100>, + <0x00 0x60000000 0x00 0x00100000>; + reg-names = "reg", "cfg", "rcsu_strap", "rcsu_status", "msg"; + ranges = <0x01000000 0x0 0x60100000 0x0 0x60100000 0x0 0x00100000>, + <0x02000000 0x0 0x60200000 0x0 0x60200000 0x0 0x1fe00000>, + <0x43000000 0x18 0x00000000 0x18 0x00000000 0x04 0x00000000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0xc0 0xff>; + device_type = "pci"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 2 &gic 0 0 GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 3 &gic 0 0 GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 4 &gic 0 0 GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH 0>; + msi-map = <0xc000 &gic_its 0xc000 0x4000>; + status = "disabled"; + }; + + pcie_x4_rc: pcie@a070000 { + compatible = "cix,sky1-pcie-host"; + reg = <0x00 0x0a070000 0x00 0x10000>, + <0x00 0x29000000 0x00 0x3000000>, + <0x00 0x0a060300 0x00 0x40>, + <0x00 0x0a060400 0x00 0x40>, + <0x00 0x50000000 0x00 0x00100000>; + reg-names = "reg", "cfg", "rcsu_strap", "rcsu_status", "msg"; + ranges = <0x01000000 0x00 0x50100000 0x00 0x50100000 0x00 0x00100000>, + <0x02000000 0x00 0x50200000 0x00 0x50200000 0x00 0x0fe00000>, + <0x43000000 0x14 0x00000000 0x14 0x00000000 0x04 0x00000000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x90 0xbf>; + device_type = "pci"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 2 &gic 0 0 GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 3 &gic 0 0 GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 4 &gic 0 0 GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH 0>; + msi-map = <0x9000 &gic_its 0x9000 0x3000>; + status = "disabled"; + }; + + pcie_x2_rc: pcie@a0c0000 { + compatible = "cix,sky1-pcie-host"; + reg = <0x00 0x0a0c0000 0x00 0x10000>, + <0x00 0x26000000 0x00 0x3000000>, + <0x00 0x0a0600340 0x00 0x20>, + <0x00 0x0a0600440 0x00 0x20>, + <0x00 0x40000000 0x00 0x00100000>; + reg-names = "reg", "cfg", "rcsu_strap", "rcsu_status", "msg"; + ranges = <0x01000000 0x0 0x40100000 0x0 0x40100000 0x0 0x00100000>, + <0x02000000 0x0 0x40200000 0x0 0x40200000 0x0 0x0fe00000>, + <0x43000000 0x10 0x00000000 0x10 0x00000000 0x04 0x00000000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x60 0x8f>; + device_type = "pci"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 2 &gic 0 0 GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 3 &gic 0 0 GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 4 &gic 0 0 GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH 0>; + msi-map = <0x6000 &gic_its 0x6000 0x3000>; + status = "disabled"; + }; + + pcie_x1_0_rc: pcie@a0d0000 { + compatible = "cix,sky1-pcie-host"; + reg = <0x00 0x0a0d0000 0x00 0x10000>, + <0x00 0x20000000 0x00 0x3000000>, + <0x00 0x0a060360 0x00 0x20>, + <0x00 0x0a060460 0x00 0x20>, + <0x00 0x30000000 0x00 0x00100000>; + reg-names = "reg", "cfg", "rcsu_strap", "rcsu_status", "msg"; + ranges = <0x01000000 0x0 0x30100000 0x0 0x30100000 0x0 0x00100000>, + <0x02000000 0x0 0x30200000 0x0 0x30200000 0x0 0x07e00000>, + <0x43000000 0x08 0x00000000 0x08 0x00000000 0x04 0x00000000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0x2f>; + device_type = "pci"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 2 &gic 0 0 GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 3 &gic 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 4 &gic 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH 0>; + msi-map = <0x0000 &gic_its 0x0000 0x3000>; + status = "disabled"; + }; + + pcie_x1_1_rc: pcie@a0e0000 { + compatible = "cix,sky1-pcie-host"; + reg = <0x00 0x0a0e0000 0x00 0x10000>, + <0x00 0x23000000 0x00 0x3000000>, + <0x00 0x0a060380 0x00 0x20>, + <0x00 0x0a060480 0x00 0x20>, + <0x00 0x38000000 0x00 0x00100000>; + reg-names = "reg", "cfg", "rcsu_strap", "rcsu_status", "msg"; + ranges = <0x01000000 0x0 0x38100000 0x0 0x38100000 0x0 0x00100000>, + <0x02000000 0x0 0x38200000 0x0 0x38200000 0x0 0x07e00000>, + <0x43000000 0x0C 0x00000000 0x0C 0x00000000 0x04 0x00000000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x30 0x5f>; + device_type = "pci"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 2 &gic 0 0 GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 3 &gic 0 0 GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH 0>, + <0 0 0 4 &gic 0 0 GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH 0>; + msi-map = <0x3000 &gic_its 0x3000 0x3000>; + status = "disabled"; + }; + gic: interrupt-controller@e010000 { compatible = "arm,gic-v3"; reg = <0x0 0x0e010000 0 0x10000>, /* GICD */ @@ -416,6 +567,11 @@ ppi_partition1: interrupt-partition-1 { }; }; }; + + iomuxc_s5: pinctrl@16007000 { + compatible = "cix,sky1-pinctrl-s5"; + reg = <0x0 0x16007000 0x0 0x1000>; + }; }; timer { diff --git a/arch/arm64/boot/dts/exynos/exynos7870-a2corelte.dts b/arch/arm64/boot/dts/exynos/exynos7870-a2corelte.dts index eb7b4859318740..6f40ca4350ed72 100644 --- a/arch/arm64/boot/dts/exynos/exynos7870-a2corelte.dts +++ b/arch/arm64/boot/dts/exynos/exynos7870-a2corelte.dts @@ -27,20 +27,7 @@ aliases { }; chosen { - #address-cells = <2>; - #size-cells = <1>; - ranges; - stdout-path = &serial2; - - framebuffer@67000000 { - compatible = "simple-framebuffer"; - reg = <0x0 0x67000000 (540 * 960 * 4)>; - width = <540>; - height = <960>; - stride = <(540 * 4)>; - format = "a8r8g8b8"; - }; }; gpio-keys { @@ -110,8 +97,9 @@ ramoops@46800000 { pmsg-size = <0x4000>; }; - framebuffer@67000000 { + cont_splash_mem: framebuffer@67000000 { reg = <0x0 0x67000000 (540 * 960 * 4)>; + iommu-addresses = <&decon 0x67000000 (540 * 960 * 4)>; no-map; }; }; @@ -124,6 +112,47 @@ vibrator { }; }; +&decon { + memory-region = <&cont_splash_mem>; + + status = "okay"; +}; + +&dsi { + #address-cells = <1>; + #size-cells = <0>; + + samsung,burst-clock-frequency = <836000000>; + samsung,esc-clock-frequency = <16000000>; + samsung,pll-clock-frequency = <26000000>; + + status = "okay"; + + panel@0 { + compatible = "syna,td4101-panel"; + reg = <0>; + + backlight-gpios = <&gpd3 7 GPIO_ACTIVE_LOW>; + + width-mm = <62>; + height-mm = <110>; + + panel-timing { + clock-frequency = <69336720>; + + hactive = <540>; + hsync-len = <4>; + hfront-porch = <364>; + hback-porch = <40>; + + vactive = <960>; + vsync-len = <2>; + vfront-porch = <244>; + vback-porch = <13>; + }; + }; +}; + &gpu { status = "okay"; }; @@ -447,6 +476,7 @@ &mmc0 { vmmc-supply = <&vdd_ldo26>; vqmmc-supply = <&vdd_ldo27>; + bus-width = <8>; fifo-depth = <64>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; diff --git a/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts b/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts index b8ce433b93b1b4..09f2367cfec938 100644 --- a/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts +++ b/arch/arm64/boot/dts/exynos/exynos7870-j6lte.dts @@ -27,20 +27,7 @@ aliases { }; chosen { - #address-cells = <2>; - #size-cells = <1>; - ranges; - stdout-path = &serial2; - - framebuffer@67000000 { - compatible = "simple-framebuffer"; - reg = <0x0 0x67000000 (720 * 1480 * 4)>; - width = <720>; - height = <1480>; - stride = <(720 * 4)>; - format = "a8r8g8b8"; - }; }; gpio-hall-effect-sensor { @@ -119,8 +106,9 @@ ramoops@46e00000 { pmsg-size = <0x4000>; }; - framebuffer@67000000 { + cont_splash_mem: framebuffer@67000000 { reg = <0x0 0x67000000 (720 * 1480 * 4)>; + iommu-addresses = <&decon 0x67000000 (720 * 1480 * 4)>; no-map; }; }; @@ -133,6 +121,28 @@ vibrator { }; }; +&decon { + memory-region = <&cont_splash_mem>; + + status = "okay"; +}; + +&dsi { + #address-cells = <1>; + #size-cells = <0>; + + samsung,burst-clock-frequency = <500000000>; + samsung,esc-clock-frequency = <16000000>; + samsung,pll-clock-frequency = <26000000>; + + status = "okay"; + + panel@0 { + compatible = "samsung,s6e8aa5x01-ams561ra01"; + reg = <0>; + }; +}; + &gpu { status = "okay"; }; @@ -430,6 +440,7 @@ &mmc0 { vmmc-supply = <&vdd_ldo26>; vqmmc-supply = <&vdd_ldo27>; + bus-width = <8>; fifo-depth = <64>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; diff --git a/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts b/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts index b1d9eff5a82702..29e124c72e9d25 100644 --- a/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts +++ b/arch/arm64/boot/dts/exynos/exynos7870-on7xelte.dts @@ -27,20 +27,7 @@ aliases { }; chosen { - #address-cells = <2>; - #size-cells = <1>; - ranges; - stdout-path = &serial2; - - framebuffer@67000000 { - compatible = "simple-framebuffer"; - reg = <0x0 0x67000000 (1080 * 1920 * 4)>; - width = <1080>; - height = <1920>; - stride = <(1080 * 4)>; - format = "a8r8g8b8"; - }; }; gpio-keys { @@ -108,8 +95,9 @@ ramoops@46e00000 { pmsg-size = <0x4000>; }; - framebuffer@67000000 { + cont_splash_mem: framebuffer@67000000 { reg = <0x0 0x67000000 (1080 * 1920 * 4)>; + iommu-addresses = <&decon 0x67000000 (1080 * 1920 * 4)>; no-map; }; }; @@ -122,6 +110,47 @@ vibrator { }; }; +&decon { + memory-region = <&cont_splash_mem>; + + status = "okay"; +}; + +&dsi { + #address-cells = <1>; + #size-cells = <0>; + + samsung,burst-clock-frequency = <1001000000>; + samsung,esc-clock-frequency = <16000000>; + samsung,pll-clock-frequency = <26000000>; + + status = "okay"; + + panel@0 { + compatible = "syna,td4300-panel"; + reg = <0>; + + backlight-gpios = <&gpd3 5 GPIO_ACTIVE_LOW>; + + width-mm = <68>; + height-mm = <121>; + + panel-timing { + clock-frequency = <144389520>; + + hactive = <1080>; + hsync-len = <4>; + hfront-porch = <120>; + hback-porch = <32>; + + vactive = <1920>; + vsync-len = <2>; + vfront-porch = <21>; + vback-porch = <4>; + }; + }; +}; + &gpu { status = "okay"; }; @@ -463,6 +492,7 @@ &mmc0 { vmmc-supply = <&vdd_ldo26>; vqmmc-supply = <&vdd_ldo27>; + bus-width = <8>; fifo-depth = <64>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; diff --git a/arch/arm64/boot/dts/exynos/exynos7870.dtsi b/arch/arm64/boot/dts/exynos/exynos7870.dtsi index d5d347623b9038..2827e10d69625a 100644 --- a/arch/arm64/boot/dts/exynos/exynos7870.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7870.dtsi @@ -178,6 +178,14 @@ pmu_system_controller: system-controller@10480000 { "samsung,exynos7-pmu", "syscon"; reg = <0x10480000 0x10000>; + mipi_phy: mipi-phy { + compatible = "samsung,exynos7870-mipi-video-phy"; + #phy-cells = <1>; + + samsung,cam0-sysreg = <&syscon_cam0>; + samsung,disp-sysreg = <&syscon_disp>; + }; + reboot-mode { compatible = "syscon-reboot-mode"; offset = <0x080c>; @@ -675,6 +683,77 @@ cmu_isp: clock-controller@144d0000 { <&cmu_mif CLK_GOUT_MIF_CMU_ISP_VRA>; }; + syscon_cam0: system-controller@144f1040 { + compatible = "samsung,exynos7870-cam0-sysreg", "syscon"; + reg = <0x144f1040 0x04>; + }; + + dsi: dsi@14800000 { + compatible = "samsung,exynos7870-mipi-dsi"; + reg = <0x14800000 0x100>; + interrupts = ; + + clocks = <&cmu_dispaud CLK_GOUT_DISPAUD_BUS_DISP>, + <&cmu_dispaud CLK_GOUT_DISPAUD_APB_DISP>, + <&cmu_dispaud CLK_GOUT_DISPAUD_MUX_MIPIPHY_TXBYTECLKHS_USER>, + <&cmu_dispaud CLK_GOUT_DISPAUD_MUX_MIPIPHY_RXCLKESC0_USER>; + clock-names = "bus", "pll", "byte", "esc"; + + phys = <&mipi_phy 1>; + phy-names = "dsim"; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsi_to_decon: endpoint { + remote-endpoint = <&decon_to_dsi>; + }; + }; + }; + }; + + decon: display-controller@14830000 { + compatible = "samsung,exynos7870-decon"; + reg = <0x14830000 0x8000>; + interrupts = , + , + ; + interrupt-names = "fifo", "vsync", "lcd_sys"; + + clocks = <&cmu_dispaud CLK_GOUT_DISPAUD_MUX_PLL>, + <&cmu_dispaud CLK_GOUT_DISPAUD_MUX_BUS_USER>, + <&cmu_dispaud CLK_GOUT_DISPAUD_MUX_DECON_ECLK>, + <&cmu_dispaud CLK_GOUT_DISPAUD_MUX_DECON_VCLK>; + clock-names = "pclk_decon0", "aclk_decon0", + "decon0_eclk", "decon0_vclk"; + + iommus = <&sysmmu_decon>; + + status = "disabled"; + + port { + decon_to_dsi: endpoint { + remote-endpoint = <&dsi_to_decon>; + }; + }; + }; + + sysmmu_decon: iommu@14860000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14860000 0x1000>; + interrupts = ; + #iommu-cells = <0>; + + clocks = <&cmu_dispaud CLK_GOUT_DISPAUD_MUX_BUS_USER>; + clock-names = "sysmmu"; + }; + pinctrl_dispaud: pinctrl@148c0000 { compatible = "samsung,exynos7870-pinctrl"; reg = <0x148c0000 0x1000>; @@ -692,6 +771,11 @@ cmu_dispaud: clock-controller@148d0000 { <&cmu_mif CLK_GOUT_MIF_CMU_DISPAUD_DECON_ECLK>, <&cmu_mif CLK_GOUT_MIF_CMU_DISPAUD_DECON_VCLK>; }; + + syscon_disp: system-controller@148f100c { + compatible = "samsung,exynos7870-disp-sysreg", "syscon"; + reg = <0x148f100c 0x04>; + }; }; timer { diff --git a/arch/arm64/boot/dts/exynos/exynos990.dtsi b/arch/arm64/boot/dts/exynos/exynos990.dtsi index 7179109c49d0b0..f8e2a31b4b7519 100644 --- a/arch/arm64/boot/dts/exynos/exynos990.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos990.dtsi @@ -260,6 +260,12 @@ cmu_peric0: clock-controller@10400000 { clock-names = "oscclk", "bus", "ip"; }; + sysreg_peric0: syscon@10420000 { + compatible = "samsung,exynos990-peric0-sysreg", "syscon"; + reg = <0x10420000 0x10000>; + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_SYSREG_PCLK>; + }; + pinctrl_peric0: pinctrl@10430000 { compatible = "samsung,exynos990-pinctrl"; reg = <0x10430000 0x1000>; @@ -277,6 +283,12 @@ cmu_peric1: clock-controller@10700000 { clock-names = "oscclk", "bus", "ip"; }; + sysreg_peric1: syscon@10720000 { + compatible = "samsung,exynos990-peric1-sysreg", "syscon"; + reg = <0x10720000 0x10000>; + clocks = <&cmu_peric1 CLK_GOUT_PERIC1_SYSREG_PCLK>; + }; + pinctrl_peric1: pinctrl@10730000 { compatible = "samsung,exynos990-pinctrl"; reg = <0x10730000 0x1000>; diff --git a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi index 0fdf2062930a99..6ee74d260776f1 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi +++ b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi @@ -1449,11 +1449,37 @@ ufs_0_phy: phy@16e04000 { status = "disabled"; }; + cmu_mfc: clock-controller@19c00000 { + compatible = "samsung,exynosautov920-cmu-mfc"; + reg = <0x19c00000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_MFC_MFC>, + <&cmu_top DOUT_CLKCMU_MFC_WFD>; + clock-names = "oscclk", + "mfc", + "wfd"; + }; + pinctrl_aud: pinctrl@1a460000 { compatible = "samsung,exynosautov920-pinctrl"; reg = <0x1a460000 0x10000>; }; + cmu_m2m: clock-controller@1a800000 { + compatible = "samsung,exynosautov920-cmu-m2m"; + reg = <0x1a800000 0x8000>; + #clock-cells = <1>; + + clocks = <&xtcxo>, + <&cmu_top DOUT_CLKCMU_M2M_NOC>, + <&cmu_top DOUT_CLKCMU_M2M_JPEG>; + clock-names = "oscclk", + "noc", + "jpeg"; + }; + cmu_cpucl0: clock-controller@1ec00000 { compatible = "samsung,exynosautov920-cmu-cpucl0"; reg = <0x1ec00000 0x8000>; diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi b/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi index 84ff3e047d3b31..93892adaa67943 100644 --- a/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi +++ b/arch/arm64/boot/dts/exynos/google/gs101-pixel-common.dtsi @@ -109,6 +109,13 @@ pmic { system-power-controller; wakeup-source; + clocks { + compatible = "samsung,s2mpg10-clk"; + #clock-cells = <1>; + clock-output-names = "rtc32k_ap", "peri32k1", + "peri32k2"; + }; + regulators { }; }; diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi index 31c99526470d0b..d06d1d05f36408 100644 --- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi @@ -7,6 +7,7 @@ */ #include +#include #include #include #include @@ -72,80 +73,96 @@ cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0000>; + clocks = <&acpm_ipc GS101_CLK_ACPM_DVFS_CPUCL0>; enable-method = "psci"; cpu-idle-states = <&ananke_cpu_sleep>; capacity-dmips-mhz = <250>; dynamic-power-coefficient = <70>; + operating-points-v2 = <&cpucl0_opp_table>; }; cpu1: cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0100>; + clocks = <&acpm_ipc GS101_CLK_ACPM_DVFS_CPUCL0>; enable-method = "psci"; cpu-idle-states = <&ananke_cpu_sleep>; capacity-dmips-mhz = <250>; dynamic-power-coefficient = <70>; + operating-points-v2 = <&cpucl0_opp_table>; }; cpu2: cpu@200 { device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0200>; + clocks = <&acpm_ipc GS101_CLK_ACPM_DVFS_CPUCL0>; enable-method = "psci"; cpu-idle-states = <&ananke_cpu_sleep>; capacity-dmips-mhz = <250>; dynamic-power-coefficient = <70>; + operating-points-v2 = <&cpucl0_opp_table>; }; cpu3: cpu@300 { device_type = "cpu"; compatible = "arm,cortex-a55"; reg = <0x0300>; + clocks = <&acpm_ipc GS101_CLK_ACPM_DVFS_CPUCL0>; enable-method = "psci"; cpu-idle-states = <&ananke_cpu_sleep>; capacity-dmips-mhz = <250>; dynamic-power-coefficient = <70>; + operating-points-v2 = <&cpucl0_opp_table>; }; cpu4: cpu@400 { device_type = "cpu"; compatible = "arm,cortex-a76"; reg = <0x0400>; + clocks = <&acpm_ipc GS101_CLK_ACPM_DVFS_CPUCL1>; enable-method = "psci"; cpu-idle-states = <&enyo_cpu_sleep>; capacity-dmips-mhz = <620>; dynamic-power-coefficient = <284>; + operating-points-v2 = <&cpucl1_opp_table>; }; cpu5: cpu@500 { device_type = "cpu"; compatible = "arm,cortex-a76"; reg = <0x0500>; + clocks = <&acpm_ipc GS101_CLK_ACPM_DVFS_CPUCL1>; enable-method = "psci"; cpu-idle-states = <&enyo_cpu_sleep>; capacity-dmips-mhz = <620>; dynamic-power-coefficient = <284>; + operating-points-v2 = <&cpucl1_opp_table>; }; cpu6: cpu@600 { device_type = "cpu"; compatible = "arm,cortex-x1"; reg = <0x0600>; + clocks = <&acpm_ipc GS101_CLK_ACPM_DVFS_CPUCL2>; enable-method = "psci"; cpu-idle-states = <&hera_cpu_sleep>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <650>; + operating-points-v2 = <&cpucl2_opp_table>; }; cpu7: cpu@700 { device_type = "cpu"; compatible = "arm,cortex-x1"; reg = <0x0700>; + clocks = <&acpm_ipc GS101_CLK_ACPM_DVFS_CPUCL2>; enable-method = "psci"; cpu-idle-states = <&hera_cpu_sleep>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <650>; + operating-points-v2 = <&cpucl2_opp_table>; }; idle-states { @@ -183,6 +200,273 @@ hera_cpu_sleep: cpu-hera-sleep { }; }; + cpucl0_opp_table: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <537500>; + clock-latency-ns = <500000>; + }; + + opp-574000000 { + opp-hz = /bits/ 64 <574000000>; + opp-microvolt = <600000>; + clock-latency-ns = <500000>; + }; + + opp-738000000 { + opp-hz = /bits/ 64 <738000000>; + opp-microvolt = <618750>; + clock-latency-ns = <500000>; + }; + + opp-930000000 { + opp-hz = /bits/ 64 <930000000>; + opp-microvolt = <668750>; + clock-latency-ns = <500000>; + }; + + opp-1098000000 { + opp-hz = /bits/ 64 <1098000000>; + opp-microvolt = <712500>; + clock-latency-ns = <500000>; + }; + + opp-1197000000 { + opp-hz = /bits/ 64 <1197000000>; + opp-microvolt = <731250>; + clock-latency-ns = <500000>; + }; + + opp-1328000000 { + opp-hz = /bits/ 64 <1328000000>; + opp-microvolt = <762500>; + clock-latency-ns = <500000>; + }; + + opp-1401000000 { + opp-hz = /bits/ 64 <1401000000>; + opp-microvolt = <781250>; + clock-latency-ns = <500000>; + }; + + opp-1598000000 { + opp-hz = /bits/ 64 <1598000000>; + opp-microvolt = <831250>; + clock-latency-ns = <500000>; + }; + + opp-1704000000 { + opp-hz = /bits/ 64 <1704000000>; + opp-microvolt = <862500>; + clock-latency-ns = <500000>; + }; + + opp-1803000000 { + opp-hz = /bits/ 64 <1803000000>; + opp-microvolt = <906250>; + clock-latency-ns = <500000>; + }; + }; + + cpucl1_opp_table: opp-table-1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <506250>; + clock-latency-ns = <500000>; + }; + + opp-553000000 { + opp-hz = /bits/ 64 <553000000>; + opp-microvolt = <537500>; + clock-latency-ns = <500000>; + }; + + opp-696000000 { + opp-hz = /bits/ 64 <696000000>; + opp-microvolt = <562500>; + clock-latency-ns = <500000>; + }; + + opp-799000000 { + opp-hz = /bits/ 64 <799000000>; + opp-microvolt = <581250>; + clock-latency-ns = <500000>; + }; + + opp-910000000 { + opp-hz = /bits/ 64 <910000000>; + opp-microvolt = <606250>; + clock-latency-ns = <500000>; + }; + + opp-1024000000 { + opp-hz = /bits/ 64 <1024000000>; + opp-microvolt = <625000>; + clock-latency-ns = <500000>; + }; + + opp-1197000000 { + opp-hz = /bits/ 64 <1197000000>; + opp-microvolt = <662500>; + clock-latency-ns = <500000>; + }; + + opp-1328000000 { + opp-hz = /bits/ 64 <1328000000>; + opp-microvolt = <687500>; + clock-latency-ns = <500000>; + }; + + opp-1491000000 { + opp-hz = /bits/ 64 <1491000000>; + opp-microvolt = <731250>; + clock-latency-ns = <500000>; + }; + + opp-1663000000 { + opp-hz = /bits/ 64 <1663000000>; + opp-microvolt = <775000>; + clock-latency-ns = <500000>; + }; + + opp-1836000000 { + opp-hz = /bits/ 64 <1836000000>; + opp-microvolt = <818750>; + clock-latency-ns = <500000>; + }; + + opp-1999000000 { + opp-hz = /bits/ 64 <1999000000>; + opp-microvolt = <868750>; + clock-latency-ns = <500000>; + }; + + opp-2130000000 { + opp-hz = /bits/ 64 <2130000000>; + opp-microvolt = <918750>; + clock-latency-ns = <500000>; + }; + + opp-2253000000 { + opp-hz = /bits/ 64 <2253000000>; + opp-microvolt = <968750>; + clock-latency-ns = <500000>; + }; + }; + + cpucl2_opp_table: opp-table-2 { + compatible = "operating-points-v2"; + opp-shared; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <500000>; + clock-latency-ns = <500000>; + }; + + opp-851000000 { + opp-hz = /bits/ 64 <851000000>; + opp-microvolt = <556250>; + clock-latency-ns = <500000>; + }; + + opp-984000000 { + opp-hz = /bits/ 64 <984000000>; + opp-microvolt = <575000>; + clock-latency-ns = <500000>; + }; + + opp-1106000000 { + opp-hz = /bits/ 64 <1106000000>; + opp-microvolt = <606250>; + clock-latency-ns = <500000>; + }; + + opp-1277000000 { + opp-hz = /bits/ 64 <1277000000>; + opp-microvolt = <631250>; + clock-latency-ns = <500000>; + }; + + opp-1426000000 { + opp-hz = /bits/ 64 <1426000000>; + opp-microvolt = <662500>; + clock-latency-ns = <500000>; + }; + + opp-1582000000 { + opp-hz = /bits/ 64 <1582000000>; + opp-microvolt = <693750>; + clock-latency-ns = <500000>; + }; + + opp-1745000000 { + opp-hz = /bits/ 64 <1745000000>; + opp-microvolt = <731250>; + clock-latency-ns = <500000>; + }; + + opp-1826000000 { + opp-hz = /bits/ 64 <1826000000>; + opp-microvolt = <750000>; + clock-latency-ns = <500000>; + }; + + opp-2048000000 { + opp-hz = /bits/ 64 <2048000000>; + opp-microvolt = <793750>; + clock-latency-ns = <500000>; + }; + + opp-2188000000 { + opp-hz = /bits/ 64 <2188000000>; + opp-microvolt = <831250>; + clock-latency-ns = <500000>; + }; + + opp-2252000000 { + opp-hz = /bits/ 64 <2252000000>; + opp-microvolt = <850000>; + clock-latency-ns = <500000>; + }; + + opp-2401000000 { + opp-hz = /bits/ 64 <2401000000>; + opp-microvolt = <887500>; + clock-latency-ns = <500000>; + }; + + opp-2507000000 { + opp-hz = /bits/ 64 <2507000000>; + opp-microvolt = <925000>; + clock-latency-ns = <500000>; + }; + + opp-2630000000 { + opp-hz = /bits/ 64 <2630000000>; + opp-microvolt = <968750>; + clock-latency-ns = <500000>; + }; + + opp-2704000000 { + opp-hz = /bits/ 64 <2704000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <500000>; + }; + + opp-2802000000 { + opp-hz = /bits/ 64 <2802000000>; + opp-microvolt = <1056250>; + clock-latency-ns = <500000>; + }; + }; + /* ect node is required to be present by bootloader */ ect { }; @@ -202,6 +486,7 @@ ext_200m: clock-2 { firmware { acpm_ipc: power-management { compatible = "google,gs101-acpm-ipc"; + #clock-cells = <1>; mboxes = <&ap2apm_mailbox>; shmem = <&apm_sram>; }; @@ -288,13 +573,19 @@ soc: soc@0 { cmu_misc: clock-controller@10010000 { compatible = "google,gs101-cmu-misc"; - reg = <0x10010000 0x8000>; + reg = <0x10010000 0x10000>; #clock-cells = <1>; clocks = <&cmu_top CLK_DOUT_CMU_MISC_BUS>, <&cmu_top CLK_DOUT_CMU_MISC_SSS>; clock-names = "bus", "sss"; }; + sysreg_misc: syscon@10030000 { + compatible = "google,gs101-misc-sysreg", "syscon"; + reg = <0x10030000 0x10000>; + clocks = <&cmu_misc CLK_GOUT_MISC_SYSREG_MISC_PCLK>; + }; + timer@10050000 { compatible = "google,gs101-mct", "samsung,exynos4210-mct"; @@ -365,7 +656,7 @@ ppi_cluster2: interrupt-partition-2 { cmu_peric0: clock-controller@10800000 { compatible = "google,gs101-cmu-peric0"; - reg = <0x10800000 0x4000>; + reg = <0x10800000 0x10000>; #clock-cells = <1>; clocks = <&ext_24_5m>, <&cmu_top CLK_DOUT_CMU_PERIC0_BUS>, @@ -911,7 +1202,7 @@ spi_14: spi@10a20000 { cmu_peric1: clock-controller@10c00000 { compatible = "google,gs101-cmu-peric1"; - reg = <0x10c00000 0x4000>; + reg = <0x10c00000 0x10000>; #clock-cells = <1>; clocks = <&ext_24_5m>, <&cmu_top CLK_DOUT_CMU_PERIC1_BUS>, @@ -1265,7 +1556,7 @@ spi_13: spi@10d60000 { cmu_hsi0: clock-controller@11000000 { compatible = "google,gs101-cmu-hsi0"; - reg = <0x11000000 0x4000>; + reg = <0x11000000 0x10000>; #clock-cells = <1>; clocks = <&ext_24_5m>, @@ -1277,6 +1568,12 @@ cmu_hsi0: clock-controller@11000000 { "usbdpdbg"; }; + sysreg_hsi0: syscon@11020000 { + compatible = "google,gs101-hsi0-sysreg", "syscon"; + reg = <0x11020000 0x10000>; + clocks = <&cmu_hsi0 CLK_GOUT_HSI0_SYSREG_HSI0_PCLK>; + }; + usbdrd31_phy: phy@11100000 { compatible = "google,gs101-usb31drd-phy"; reg = <0x11100000 0x0200>, @@ -1332,7 +1629,7 @@ pinctrl_hsi1: pinctrl@11840000 { cmu_hsi2: clock-controller@14400000 { compatible = "google,gs101-cmu-hsi2"; - reg = <0x14400000 0x4000>; + reg = <0x14400000 0x10000>; #clock-cells = <1>; clocks = <&ext_24_5m>, <&cmu_top CLK_DOUT_CMU_HSI2_BUS>, @@ -1395,16 +1692,16 @@ ufs_0_phy: phy@14704000 { cmu_apm: clock-controller@17400000 { compatible = "google,gs101-cmu-apm"; - reg = <0x17400000 0x8000>; + reg = <0x17400000 0x10000>; #clock-cells = <1>; clocks = <&ext_24_5m>; clock-names = "oscclk"; }; - sysreg_apm: syscon@174204e0 { + sysreg_apm: syscon@17420000 { compatible = "google,gs101-apm-sysreg", "syscon"; - reg = <0x174204e0 0x1000>; + reg = <0x17420000 0x10000>; }; pmu_system_controller: system-controller@17460000 { @@ -1497,7 +1794,7 @@ pinctrl_gsacore: pinctrl@17a80000 { cmu_top: clock-controller@1e080000 { compatible = "google,gs101-cmu-top"; - reg = <0x1e080000 0x8000>; + reg = <0x1e080000 0x10000>; #clock-cells = <1>; clocks = <&ext_24_5m>; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 525ef180481d33..f30d3fd724d0ce 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -136,12 +136,18 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-phg.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-rdk.dtb imx8mm-phyboard-polis-peb-av-10-dtbs += imx8mm-phyboard-polis-rdk.dtb imx8mm-phyboard-polis-peb-av-10.dtbo +imx8mm-phyboard-polis-peb-av-10-etml1010g3dra-dtbs += imx8mm-phyboard-polis-rdk.dtb \ + imx8mm-phyboard-polis-peb-av-10-etml1010g3dra.dtbo +imx8mm-phyboard-polis-peb-av-10-ph128800t006-dtbs += imx8mm-phyboard-polis-rdk.dtb \ + imx8mm-phyboard-polis-peb-av-10-ph128800t006.dtbo imx8mm-phyboard-polis-peb-eval-01-dtbs += imx8mm-phyboard-polis-rdk.dtb imx8mm-phyboard-polis-peb-eval-01.dtbo imx8mm-phycore-no-eth-dtbs += imx8mm-phyboard-polis-rdk.dtb imx8mm-phycore-no-eth.dtbo imx8mm-phycore-no-spiflash-dtbs += imx8mm-phyboard-polis-rdk.dtb imx8mm-phycore-no-spiflash.dtbo imx8mm-phycore-rpmsg-dtbs += imx8mm-phyboard-polis-rdk.dtb imx8mm-phycore-rpmsg.dtbo dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-peb-av-10.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-peb-av-10-etml1010g3dra.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-peb-av-10-ph128800t006.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-phyboard-polis-peb-eval-01.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-phycore-no-eth.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-phycore-no-spiflash.dtb @@ -226,14 +232,32 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-navqp.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-nitrogen-enc-carrier-board.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-nitrogen-smarc-universal-board.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb +imx8mp-phyboard-pollux-etml1010g3dra-dtbs += imx8mp-phyboard-pollux-rdk.dtb \ + imx8mp-phyboard-pollux-etml1010g3dra.dtbo +imx8mp-phyboard-pollux-peb-av-10-dtbs += imx8mp-phyboard-pollux-rdk.dtb \ + imx8mp-phyboard-pollux-peb-av-10.dtbo +imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra-dtbs += imx8mp-phyboard-pollux-rdk.dtb \ + imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtbo +imx8mp-phyboard-pollux-peb-av-10-ph128800t006-dtbs += imx8mp-phyboard-pollux-rdk.dtb \ + imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtbo +imx8mp-phyboard-pollux-ph128800t006-dtbs += imx8mp-phyboard-pollux-rdk.dtb \ + imx8mp-phyboard-pollux-ph128800t006.dtbo imx8mp-phyboard-pollux-rdk-no-eth-dtbs += imx8mp-phyboard-pollux-rdk.dtb imx8mp-phycore-no-eth.dtbo +dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-etml1010g3dra.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-peb-av-10.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-ph128800t006.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk-no-eth.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-prt8ml.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-basic.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-hdmi.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-lt6.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-mi1010ait-1cp1.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-bd500.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-hdmi.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-tian-g07017.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revc-jutouch-jt101tm023.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-toradex-smarc-dev.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mp-ras314.dtb @@ -344,6 +368,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqps-mb-smarc-2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8ulp-9x9-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx91-11x11-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx91-phyboard-segin.dtb dtb-$(CONFIG_ARCH_MXC) += imx91-tqma9131-mba91xxca.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb.dtb @@ -356,11 +381,15 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-kontron-bl-osm-s.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin.dtb +imx93-phyboard-nash-jtag-dtbs += imx93-phyboard-nash.dtb imx93-phyboard-nash-jtag.dtbo imx93-phyboard-nash-peb-wlbt-07-dtbs += imx93-phyboard-nash.dtb imx93-phyboard-nash-peb-wlbt-07.dtbo +imx93-phyboard-nash-pwm-fan-dtbs += imx93-phyboard-nash.dtb imx93-phyboard-nash-pwm-fan.dtbo imx93-phyboard-segin-peb-eval-01-dtbs += imx93-phyboard-segin.dtb imx93-phyboard-segin-peb-eval-01.dtbo imx93-phyboard-segin-peb-wlbt-05-dtbs += imx93-phyboard-segin.dtb imx93-phyboard-segin-peb-wlbt-05.dtbo imx93-phycore-rpmsg-dtbs += imx93-phyboard-nash.dtb imx93-phyboard-segin.dtb imx93-phycore-rpmsg.dtbo +dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash-jtag.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash-peb-wlbt-07.dtb +dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-nash-pwm-fan.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin-peb-eval-01.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin-peb-wlbt-05.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-phycore-rpmsg.dtb @@ -373,6 +402,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx943-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk-sof.dtb +dtb-$(CONFIG_ARCH_MXC) += imx95-toradex-smarc-dev.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-tqma9596sa-mb-smarc-2.dtb imx95-15x15-evk-pcie0-ep-dtbs = imx95-15x15-evk.dtb imx-pcie0-ep.dtbo @@ -382,6 +412,8 @@ imx95-19x19-evk-pcie1-ep-dtbs += imx95-19x19-evk.dtb imx-pcie1-ep.dtbo dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk-pcie0-ep.dtb imx95-19x19-evk-pcie1-ep.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-libra-rdk-fpsc.dtb +dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-verdin-evk.dtb + imx8mm-kontron-dl-dtbs := imx8mm-kontron-bl.dtb imx8mm-kontron-dl.dtbo imx8mm-kontron-bl-lte-dtbs := imx8mm-kontron-bl.dtb imx8mm-kontron-bl-lte.dtbo diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index fc3e138077b86c..ef80bf6a604f47 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -493,10 +493,11 @@ QORIQ_CLK_PLL_DIV(4)>, }; usb0: usb@2f00000 { - compatible = "snps,dwc3"; + compatible = "fsl,ls1012a-dwc3", "fsl,ls1028a-dwc3"; reg = <0x0 0x2f00000 0x0 0x10000>; interrupts = ; dr_mode = "host"; + dma-coherent; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 7d172d7e5737c4..e7f9c9319319a6 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -613,9 +613,11 @@ gpio3: gpio@2320000 { }; usb0: usb@3100000 { - compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; + compatible = "fsl,ls1028a-dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; interrupts = ; + iommus = <&smmu 1>; + dma-coherent; snps,dis_rxdet_inp3_quirk; snps,quirk-frame-length-adjustment = <0x20>; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; @@ -623,9 +625,11 @@ usb0: usb@3100000 { }; usb1: usb@3110000 { - compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; + compatible = "fsl,ls1028a-dwc3"; reg = <0x0 0x3110000 0x0 0x10000>; interrupts = ; + iommus = <&smmu 2>; + dma-coherent; snps,dis_rxdet_inp3_quirk; snps,quirk-frame-length-adjustment = <0x20>; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 73315c51703943..50d9b03a284a2a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -833,10 +833,11 @@ aux_bus: bus { dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>; usb0: usb@2f00000 { - compatible = "snps,dwc3"; + compatible = "fsl,ls1043a-dwc3", "fsl,ls1028a-dwc3"; reg = <0x0 0x2f00000 0x0 0x10000>; interrupts = ; dr_mode = "host"; + dma-coherent; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; usb3-lpm-capable; @@ -845,10 +846,11 @@ usb0: usb@2f00000 { }; usb1: usb@3000000 { - compatible = "snps,dwc3"; + compatible = "fsl,ls1043a-dwc3", "fsl,ls1028a-dwc3"; reg = <0x0 0x3000000 0x0 0x10000>; interrupts = ; dr_mode = "host"; + dma-coherent; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; usb3-lpm-capable; @@ -857,10 +859,11 @@ usb1: usb@3000000 { }; usb2: usb@3100000 { - compatible = "snps,dwc3"; + compatible = "fsl,ls1043a-dwc3", "fsl,ls1028a-dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; interrupts = ; dr_mode = "host"; + dma-coherent; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; usb3-lpm-capable; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts index 736722b58e77f7..48a6c08fcea822 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts @@ -42,6 +42,21 @@ aliases { chosen { stdout-path = "serial0:115200n8"; }; + + sfp1: sfp-1 { + compatible = "sff,sfp"; + i2c-bus = <&sfp1_i2c>; + maximum-power-milliwatt = <2000>; + mod-def0-gpios = <&stat_pres2 6 GPIO_ACTIVE_LOW>; + }; + + sfp2: sfp-2 { + compatible = "sff,sfp"; + i2c-bus = <&sfp2_i2c>; + maximum-power-milliwatt = <2000>; + mod-def0-gpios = <&stat_pres2 7 GPIO_ACTIVE_LOW>; + }; + }; &dspi { @@ -139,6 +154,31 @@ temp-sensor@4c { reg = <0x4c>; }; }; + + i2c@7 { + reg = <0x7>; + #address-cells = <1>; + #size-cells = <0>; + + i2c-mux@76 { + compatible = "nxp,pca9547"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + + sfp1_i2c: i2c@6 { + reg = <0x6>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp2_i2c: i2c@7 { + reg = <0x7>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; }; }; @@ -166,8 +206,20 @@ nand@1,0 { fpga: board-control@2,0 { compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis", "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; reg = <0x2 0x0 0x0000100>; ranges = <0 2 0 0x100>; + + stat_pres2: gpio@c { + compatible = "fsl,ls1046aqds-fpga-gpio-stat-pres2"; + reg = <0xc 1>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "SLOT1", "SLOT2", "SLOT3", "SLOT4", "SLOT5", "SLOT6", + "SFP1_MOD_DEF", "SFP2_MOD_DEF"; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 770d91ef0310d9..22173d69713d1b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -749,10 +749,11 @@ aux_bus: bus { dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>; usb0: usb@2f00000 { - compatible = "snps,dwc3"; + compatible = "fsl,ls1046a-dwc3", "fsl,ls1028a-dwc3"; reg = <0x0 0x2f00000 0x0 0x10000>; interrupts = ; dr_mode = "host"; + dma-coherent; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; @@ -760,10 +761,11 @@ usb0: usb@2f00000 { }; usb1: usb@3000000 { - compatible = "snps,dwc3"; + compatible = "fsl,ls1046a-dwc3", "fsl,ls1028a-dwc3"; reg = <0x0 0x3000000 0x0 0x10000>; interrupts = ; dr_mode = "host"; + dma-coherent; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; @@ -771,10 +773,11 @@ usb1: usb@3000000 { }; usb2: usb@3100000 { - compatible = "snps,dwc3"; + compatible = "fsl,ls1046a-dwc3", "fsl,ls1028a-dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; interrupts = ; dr_mode = "host"; + dma-coherent; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts index 3a11068f2212f7..71765ec91745ec 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts @@ -253,6 +253,10 @@ usbhub: usb-hub@2d { reg = <0x2d>; }; + uc: board-controller@7e { + compatible = "traverse,ten64-controller"; + reg = <0x7e>; + }; }; &i2c2 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 9d5726378aa015..b2f6cd237be046 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -489,10 +489,12 @@ esdhc: mmc@2140000 { }; usb0: usb@3100000 { - compatible = "snps,dwc3"; + compatible = "fsl,ls1088a-dwc3", "fsl,ls1028a-dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; interrupts = ; dr_mode = "host"; + iommus = <&smmu 1>; + dma-coherent; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; @@ -500,10 +502,12 @@ usb0: usb@3100000 { }; usb1: usb@3110000 { - compatible = "snps,dwc3"; + compatible = "fsl,ls1088a-dwc3", "fsl,ls1028a-dwc3"; reg = <0x0 0x3110000 0x0 0x10000>; interrupts = ; dr_mode = "host"; + iommus = <&smmu 2>; + dma-coherent; snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts index 2d01e20b47e7f9..d8ef68ad3bcc72 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts @@ -6,7 +6,7 @@ /dts-v1/; -#include "fsl-lx2160a.dtsi" +#include "fsl-lx2160a-rev2.dtsi" / { model = "NXP Layerscape LX2160AQDS"; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts index 0c44b3cbef773d..935f421475acb8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts @@ -6,7 +6,7 @@ /dts-v1/; -#include "fsl-lx2160a.dtsi" +#include "fsl-lx2160a-rev2.dtsi" / { model = "NXP Layerscape LX2160ARDB"; @@ -31,6 +31,28 @@ sb_3v3: regulator-sb3v3 { regulator-boot-on; regulator-always-on; }; + + sfp2: sfp-2 { + compatible = "sff,sfp"; + i2c-bus = <&sfp2_i2c>; + maximum-power-milliwatt = <2000>; + /* Leave commented out if using DPMAC_LINK_TYPE_FIXED mode */ + /* tx-disable-gpios = <&sfp2_csr 0 GPIO_ACTIVE_HIGH>; */ + los-gpios = <&sfp2_csr 4 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&sfp2_csr 5 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sfp2_csr 7 GPIO_ACTIVE_LOW>; + }; + + sfp3: sfp-3 { + compatible = "sff,sfp"; + i2c-bus = <&sfp3_i2c>; + maximum-power-milliwatt = <2000>; + /* Leave commented out if using DPMAC_LINK_TYPE_FIXED mode */ + /* tx-disable-gpios = <&sfp3_csr 0 GPIO_ACTIVE_HIGH>; */ + los-gpios = <&sfp3_csr 4 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&sfp3_csr 5 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&sfp3_csr 7 GPIO_ACTIVE_LOW>; + }; }; &crypto { @@ -170,6 +192,37 @@ mt35xu512aba1: flash@1 { &i2c0 { status = "okay"; + cpld@66 { + compatible = "fsl,lx2160ardb-fpga"; + reg = <0x66>; + #address-cells = <1>; + #size-cells = <0>; + + sfp2_csr: gpio@19 { + compatible = "fsl,lx2160ardb-fpga-gpio-sfp"; + reg = <0x19>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "SFP2_TX_EN", "", + "", "", + "SFP2_RX_LOS", "SFP2_TX_FAULT", + "", "SFP2_MOD_ABS"; + }; + + sfp3_csr: gpio@1a { + compatible = "fsl,lx2160ardb-fpga-gpio-sfp"; + reg = <0x1a>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "SFP3_TX_EN", "", + "", "", + "SFP3_RX_LOS", "SFP3_TX_FAULT", + "", "SFP3_MOD_ABS"; + }; + }; + i2c-mux@77 { compatible = "nxp,pca9547"; reg = <0x77>; @@ -205,6 +258,31 @@ temperature-sensor@4d { vcc-supply = <&sb_3v3>; }; }; + + i2c@7 { + reg = <0x7>; + #address-cells = <1>; + #size-cells = <0>; + + i2c-mux@75 { + compatible = "nxp,pca9547"; + reg = <0x75>; + #address-cells = <1>; + #size-cells = <0>; + + sfp2_i2c: i2c@4 { + reg = <0x4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sfp3_i2c: i2c@5 { + reg = <0x5>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index c9541403bcd823..d899c0355e51dd 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -1094,24 +1094,28 @@ ftm_alarm0: rtc@2800000 { }; usb0: usb@3100000 { - compatible = "snps,dwc3"; + compatible = "fsl,lx2160a-dwc3", "fsl,ls1028a-dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; interrupts = ; dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; usb3-lpm-capable; + iommus = <&smmu 1>; + dma-coherent; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; status = "disabled"; }; usb1: usb@3110000 { - compatible = "snps,dwc3"; + compatible = "fsl,lx2160a-dwc3", "fsl,ls1028a-dwc3"; reg = <0x0 0x3110000 0x0 0x10000>; interrupts = ; dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; usb3-lpm-capable; + iommus = <&smmu 2>; + dma-coherent; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; status = "disabled"; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts index 9f5ff1ffe7d5ea..7a595fddc02735 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts @@ -6,7 +6,7 @@ /dts-v1/; -#include "fsl-lx2160a.dtsi" +#include "fsl-lx2160a-rev2.dtsi" / { model = "NXP Layerscape LX2162AQDS"; diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi index 311d4950793cff..06790255a764a5 100644 --- a/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-apalis-eval.dtsi @@ -109,7 +109,10 @@ &pciea { status = "okay"; }; -/* TODO: Apalis BKL1_PWM */ +/* Apalis BKL1_PWM */ +&pwm_lvds1 { + status = "okay"; +}; /* Apalis DAP1 */ &sai1 { diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi index 3d8731504ce15c..7022de46b8bff4 100644 --- a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.1.dtsi @@ -196,7 +196,10 @@ &pciea { status = "okay"; }; -/* TODO: Apalis BKL1_PWM */ +/* Apalis BKL1_PWM */ +&pwm_lvds1 { + status = "okay"; +}; /* Apalis DAP1 */ &sai1 { diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi index 106e802a68ba58..12732ed7f81197 100644 --- a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi @@ -245,7 +245,10 @@ &pciea { status = "okay"; }; -/* TODO: Apalis BKL1_PWM */ +/* Apalis BKL1_PWM */ +&pwm_lvds1 { + status = "okay"; +}; /* Apalis DAP1 */ &sai1 { diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi index 86d018f470c1ac..9153dddfd3b848 100644 --- a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi @@ -18,7 +18,7 @@ backlight: backlight { brightness-levels = <0 45 63 88 119 158 203 255>; default-brightness-level = <4>; enable-gpios = <&lsio_gpio1 4 GPIO_ACTIVE_HIGH>; /* Apalis BKL1_ON */ - /* TODO: hook-up to Apalis BKL1_PWM */ + pwms = <&pwm_lvds1 0 6666667 PWM_POLARITY_INVERTED>; status = "disabled"; }; @@ -31,12 +31,6 @@ gpio_fan: gpio-fan { 3000 1>; }; - /* TODO: LVDS Panel */ - - /* TODO: Shared PCIe/SATA Reference Clock */ - - /* TODO: PCIe Wi-Fi Reference Clock */ - /* * Power management bus used to control LDO1OUT of the * second PMIC PF8100. This is used for controlling voltage levels of @@ -83,8 +77,8 @@ reg_module_wifi: regulator-module-wifi { gpio = <&lsio_gpio1 28 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-always-on; - regulator-name = "wifi_pwrdn_fake_regulator"; - regulator-settling-time-us = <100>; + regulator-name = "Wi-Fi_POWER_DOWN"; /* Wi-Fi module PDn */ + startup-delay-us = <100>; }; reg_pcie_switch: regulator-pcie-switch { @@ -232,6 +226,34 @@ sound-spdif { spdif-out; }; + thermal-zones { + pmic-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tsens IMX_SC_R_PMIC_0>; + + cooling-maps { + cooling_maps_map0: map0 { + trip = <&pmic_alert0>; + }; + }; + + trips { + pmic_alert0: trip0 { + hysteresis = <2000>; + temperature = <110000>; + type = "passive"; + }; + + pmic_crit0: trip1 { + hysteresis = <2000>; + temperature = <125000>; + type = "critical"; + }; + }; + }; + }; + touchscreen: touchscreen { compatible = "toradex,vf50-touchscreen"; interrupt-parent = <&lsio_gpio3>; @@ -262,15 +284,15 @@ &asrc0 { &adc0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_adc0>; + vref-supply = <®_vref_1v8>; }; &adc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_adc1>; + vref-supply = <®_vref_1v8>; }; -/* TODO: Asynchronous Sample Rate Converter (ASRC) */ - &cpu_alert0 { temperature = <95000>; }; @@ -799,7 +821,10 @@ &phyx2_lpcg { <&hsio_refa_clk>, <&hsio_per_clk>; }; -/* TODO: Apalis BKL1_PWM */ +&pwm_lvds1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_bkl>; +}; /* Apalis DAP1 */ &sai1 { @@ -841,8 +866,6 @@ &spdif0 { status = "okay"; }; -/* TODO: Thermal Zones */ - /* TODO: Apalis USBH2, Apalis USBH3 and on-module Wi-Fi via on-module HSIC Hub */ /* Apalis USBH4 */ diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi index c32a6947ae9c42..5e4233ccfde469 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi @@ -296,7 +296,8 @@ edma0: dma-controller@591f0000 { , /* 20 unused */ , /* 21 */ , /* 22 unused */ - ; /* 23 unused */ + , /* 23 unused */ + ; power-domains = <&pd IMX_SC_R_DMA_0_CH0>, <&pd IMX_SC_R_DMA_0_CH1>, <&pd IMX_SC_R_DMA_0_CH2>, @@ -558,7 +559,8 @@ edma1: dma-controller@599f0000 { , /* 7 unused */ , /* sai4 */ , - ; /* sai5 */ + , /* sai5 */ + ; power-domains = <&pd IMX_SC_R_DMA_1_CH0>, <&pd IMX_SC_R_DMA_1_CH1>, <&pd IMX_SC_R_DMA_1_CH2>, diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi index ce6ef160fd5506..176e2e332f87c5 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi @@ -77,7 +77,11 @@ usdhc1: mmc@5b010000 { <&sdhc0_lpcg IMX_LPCG_CLK_5>, <&sdhc0_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "ahb", "per"; + assigned-clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <400000000>; power-domains = <&pd IMX_SC_R_SDHC_0>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step = <2>; status = "disabled"; }; @@ -88,6 +92,8 @@ usdhc2: mmc@5b020000 { <&sdhc1_lpcg IMX_LPCG_CLK_5>, <&sdhc1_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "ahb", "per"; + assigned-clocks = <&clk IMX_SC_R_SDHC_1 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <200000000>; power-domains = <&pd IMX_SC_R_SDHC_1>; fsl,tuning-start-tap = <20>; fsl,tuning-step = <2>; @@ -101,7 +107,11 @@ usdhc3: mmc@5b030000 { <&sdhc2_lpcg IMX_LPCG_CLK_5>, <&sdhc2_lpcg IMX_LPCG_CLK_0>; clock-names = "ipg", "ahb", "per"; + assigned-clocks = <&clk IMX_SC_R_SDHC_2 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <200000000>; power-domains = <&pd IMX_SC_R_SDHC_2>; + fsl,tuning-start-tap = <20>; + fsl,tuning-step = <2>; status = "disabled"; }; @@ -114,8 +124,9 @@ fec1: ethernet@5b040000 { clocks = <&enet0_lpcg IMX_LPCG_CLK_4>, <&enet0_lpcg IMX_LPCG_CLK_2>, <&enet0_lpcg IMX_LPCG_CLK_3>, - <&enet0_lpcg IMX_LPCG_CLK_0>; - clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; + <&enet0_lpcg IMX_LPCG_CLK_0>, + <&enet0_lpcg IMX_LPCG_CLK_1>; + clock-names = "ipg", "ahb", "enet_clk_ref", "ptp", "enet_2x_txclk"; assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>, <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>; assigned-clock-rates = <250000000>, <125000000>; @@ -134,8 +145,9 @@ fec2: ethernet@5b050000 { clocks = <&enet1_lpcg IMX_LPCG_CLK_4>, <&enet1_lpcg IMX_LPCG_CLK_2>, <&enet1_lpcg IMX_LPCG_CLK_3>, - <&enet1_lpcg IMX_LPCG_CLK_0>; - clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; + <&enet1_lpcg IMX_LPCG_CLK_0>, + <&enet0_lpcg IMX_LPCG_CLK_1>; + clock-names = "ipg", "ahb", "enet_clk_ref", "ptp", "enet_2x_txclk"; assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>, <&clk IMX_SC_R_ENET_1 IMX_SC_C_CLKDIV>; assigned-clock-rates = <250000000>, <125000000>; diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi index 575be8115e427e..4de78f870c05c8 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi @@ -182,7 +182,8 @@ edma2: dma-controller@5a1f0000 { , , , - ; + , + ; power-domains = <&pd IMX_SC_R_DMA_2_CH0>, <&pd IMX_SC_R_DMA_2_CH1>, <&pd IMX_SC_R_DMA_2_CH2>, @@ -466,7 +467,8 @@ edma3: dma-controller@5a9f0000 { , , , - ; + , + ; power-domains = <&pd IMX_SC_R_DMA_3_CH0>, <&pd IMX_SC_R_DMA_3_CH1>, <&pd IMX_SC_R_DMA_3_CH2>, diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts index 25a77cac6f0b5f..5c68d33e19f22e 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts @@ -598,6 +598,10 @@ &lpuart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart1>; status = "okay"; + + bluetooth { + compatible = "nxp,88w8987-bt"; + }; }; &lsio_mu5 { @@ -649,6 +653,7 @@ &pcie0 { pinctrl-names = "default"; reset-gpio = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>; vpcie-supply = <®_pcieb>; + vpcie3v3aux-supply = <®_pcieb>; status = "okay"; }; @@ -775,8 +780,10 @@ &usbotg2 { }; &usdhc1 { - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1>; + pinctrl-2 = <&pinctrl_usdhc1>; bus-width = <8>; no-sd; no-sdio; @@ -785,12 +792,15 @@ &usdhc1 { }; &usdhc2 { - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; bus-width = <4>; vmmc-supply = <®_usdhc2_vmmc>; cd-gpios = <&lsio_gpio5 1 GPIO_ACTIVE_LOW>; wp-gpios = <&lsio_gpio5 0 GPIO_ACTIVE_HIGH>; + max-frequency = <100000000>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi index 72434529f78e69..7a191195dbd976 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi @@ -101,7 +101,8 @@ &edma0 { , /* gpt0 */ , /* gpt1 */ , /* gpt2 */ - ; /* gpt3 */ + , /* gpt3 */ + ; power-domains = <&pd IMX_SC_R_DMA_0_CH0>, <&pd IMX_SC_R_DMA_0_CH1>, <&pd IMX_SC_R_DMA_0_CH2>, @@ -145,7 +146,8 @@ &edma2 { , , , - ; + , + ; }; &edma3 { @@ -156,7 +158,8 @@ &edma3 { , , , - ; + , + ; }; &flexcan1 { diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi index da33a35c6d4660..74f9ce493248ee 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi @@ -7,6 +7,7 @@ /delete-node/ &fec2; /delete-node/ &usbotg3; /delete-node/ &usb3_phy; +/delete-node/ &usb3_lpcg; / { conn_enet0_root_clk: clock-conn-enet0-root { diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi index ff7ca20752309a..6eab8a6001dbf9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi @@ -542,6 +542,7 @@ &pcie0 { assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>, <&clk IMX8MM_SYS_PLL2_250M>; vpcie-supply = <®_pcie0>; + supports-clkreq; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10-etml1010g3dra.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10-etml1010g3dra.dtso new file mode 100644 index 00000000000000..193fa9dc34d4a8 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10-etml1010g3dra.dtso @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + */ + +/dts-v1/; +/plugin/; + +#include +#include "imx8mm-phyboard-polis-peb-av-10.dtsi" + +&backlight { + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + pwms = <&pwm4 0 50000 0>; + status = "okay"; +}; + +&bridge_out { + ti,lvds-vod-swing-clock-microvolt = <200000 600000>; + ti,lvds-vod-swing-data-microvolt = <200000 600000>; +}; + +&lcdif { + status = "okay"; +}; + +&mipi_dsi { + status = "okay"; +}; + +&panel { + compatible = "edt,etml1010g3dra"; + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +&sn65dsi83 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10-ph128800t006.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10-ph128800t006.dtso new file mode 100644 index 00000000000000..fd819bd563b8f6 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10-ph128800t006.dtso @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + */ + +/dts-v1/; +/plugin/; + +#include +#include "imx8mm-phyboard-polis-peb-av-10.dtsi" + +&backlight { + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + pwms = <&pwm4 0 50000 0>; + status = "okay"; +}; + +&bridge_out { + ti,lvds-vod-swing-clock-microvolt = <200000 600000>; + ti,lvds-vod-swing-data-microvolt = <200000 600000>; +}; + +&lcdif { + status = "okay"; +}; + +&mipi_dsi { + status = "okay"; +}; + +&panel { + compatible = "powertip,ph128800t006-zhc01"; + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +&sn65dsi83 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtsi new file mode 100644 index 00000000000000..bd1f255e15ea95 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtsi @@ -0,0 +1,189 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + */ + +#include +#include +#include "imx8mm-pinfunc.h" + +&{/} { + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + power-supply = <®_vdd_3v3_s>; + status = "disabled"; + }; + + panel: panel { + backlight = <&backlight>; + power-supply = <®_vcc_3v3>; + status = "disabled"; + + port { + panel_in: endpoint { + remote-endpoint = <&bridge_out>; + }; + }; + }; + + reg_sound_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8_Audio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_sound_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3_Analog"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + sound-peb-av-10 { + compatible = "simple-audio-card"; + simple-audio-card,name = "snd-peb-av-10"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,mclk-fs = <32>; + simple-audio-card,widgets = + "Line", "Line In", + "Speaker", "Speaker", + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Speaker", "SPOP", + "Speaker", "SPOM", + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE1L", "Line In", + "LINE1R", "Line In", + "MIC3R", "Microphone Jack", + "Microphone Jack", "Mic Bias"; + + simple-audio-card,cpu { + sound-dai = <&sai5>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&codec>; + clocks = <&clk IMX8MM_CLK_SAI5>; + }; + }; +}; + +&bridge_out { + remote-endpoint = <&panel_in>; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + codec: codec@18 { + compatible = "ti,tlv320aic3007"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tlv320>; + #sound-dai-cells = <0>; + reg = <0x18>; + reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + ai3x-gpio-func = <0xd 0x0>; + ai3x-micbias-vg = <2>; + AVDD-supply = <®_sound_3v3>; + IOVDD-supply = <®_sound_3v3>; + DRVDD-supply = <®_sound_3v3>; + DVDD-supply = <®_sound_1v8>; + }; + + eeprom@57 { + compatible = "atmel,24c32"; + pagesize = <32>; + reg = <0x57>; + vcc-supply = <®_vdd_3v3_s>; + }; + + eeprom@5f { + compatible = "atmel,24c32"; + pagesize = <32>; + reg = <0x5f>; + size = <32>; + vcc-supply = <®_vdd_3v3_s>; + }; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; +}; + +&sai5 { + assigned-clocks = <&clk IMX8MM_CLK_SAI5>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL2_OUT>; + assigned-clock-rates = <11289600>; + clocks = <&clk IMX8MM_CLK_SAI5_IPG>, <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_SAI5_ROOT>, <&clk IMX8MM_CLK_DUMMY>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_AUDIO_PLL1_OUT>, + <&clk IMX8MM_AUDIO_PLL2_OUT>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", + "pll11k"; + fsl,sai-mclk-direction-output; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai5>; + #sound-dai-cells = <0>; + status = "okay"; +}; + +&iomuxc { + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c2 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c2 + >; + }; + + pinctrl_i2c3_gpio: i2c3gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x1e2 + MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x1e2 + >; + }; + pinctrl_lcd: lcd0grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1 0x12 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_MCLK_PWM4_OUT 0x12 + >; + }; + + pinctrl_sai5: sai5grp { + fsl,pins = < + MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK 0xd6 + MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0 0xd6 + MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0xd6 + MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0xd6 + MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0xd6 + >; + }; + + pinctrl_tlv320: tlv320grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x116 + MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x16 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtso index 79e4c3710ac3f4..28e8589f9f951a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtso +++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtso @@ -1,239 +1,9 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) /* * Copyright (C) 2025 PHYTEC Messtechnik GmbH - * Author: Teresa Remmet */ /dts-v1/; /plugin/; -#include -#include -#include "imx8mm-pinfunc.h" - -&{/} { - backlight: backlight { - compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd>; - default-brightness-level = <6>; - pwms = <&pwm4 0 50000 0>; - power-supply = <®_vdd_3v3_s>; - enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; - brightness-levels = <0 4 8 16 32 64 128 255>; - }; - - panel { - compatible = "edt,etml1010g3dra"; - backlight = <&backlight>; - power-supply = <®_vcc_3v3>; - - port { - panel_in: endpoint { - remote-endpoint = <&bridge_out>; - }; - }; - }; - - reg_sound_1v8: regulator-1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1V8_Audio"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - reg_sound_3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3_Analog"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - sound-peb-av-10 { - compatible = "simple-audio-card"; - simple-audio-card,name = "snd-peb-av-10"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&dailink_master>; - simple-audio-card,frame-master = <&dailink_master>; - simple-audio-card,mclk-fs = <32>; - simple-audio-card,widgets = - "Line", "Line In", - "Speaker", "Speaker", - "Microphone", "Microphone Jack", - "Headphone", "Headphone Jack"; - simple-audio-card,routing = - "Speaker", "SPOP", - "Speaker", "SPOM", - "Headphone Jack", "HPLOUT", - "Headphone Jack", "HPROUT", - "LINE1L", "Line In", - "LINE1R", "Line In", - "MIC3R", "Microphone Jack", - "Microphone Jack", "Mic Bias"; - - simple-audio-card,cpu { - sound-dai = <&sai5>; - }; - - dailink_master: simple-audio-card,codec { - sound-dai = <&codec>; - clocks = <&clk IMX8MM_CLK_SAI5>; - }; - }; -}; - -&i2c3 { - clock-frequency = <400000>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&pinctrl_i2c3>; - pinctrl-1 = <&pinctrl_i2c3_gpio>; - sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - codec: codec@18 { - compatible = "ti,tlv320aic3007"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_tlv320>; - #sound-dai-cells = <0>; - reg = <0x18>; - reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; - ai3x-gpio-func = <0xd 0x0>; - ai3x-micbias-vg = <2>; - AVDD-supply = <®_sound_3v3>; - IOVDD-supply = <®_sound_3v3>; - DRVDD-supply = <®_sound_3v3>; - DVDD-supply = <®_sound_1v8>; - }; - - eeprom@57 { - compatible = "atmel,24c32"; - pagesize = <32>; - reg = <0x57>; - vcc-supply = <®_vdd_3v3_s>; - }; - - eeprom@5f { - compatible = "atmel,24c32"; - pagesize = <32>; - reg = <0x5f>; - size = <32>; - vcc-supply = <®_vdd_3v3_s>; - }; -}; - -&lcdif { - status = "okay"; -}; - -&mipi_dsi { - samsung,esc-clock-frequency = <10000000>; - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - port@1 { - reg = <1>; - dsi_out: endpoint { - remote-endpoint = <&bridge_in>; - }; - }; - }; -}; - -&pwm4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm4>; - status = "okay"; -}; - -&sai5 { - assigned-clocks = <&clk IMX8MM_CLK_SAI5>; - assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL2_OUT>; - assigned-clock-rates = <11289600>; - clocks = <&clk IMX8MM_CLK_SAI5_IPG>, <&clk IMX8MM_CLK_DUMMY>, - <&clk IMX8MM_CLK_SAI5_ROOT>, <&clk IMX8MM_CLK_DUMMY>, - <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_AUDIO_PLL1_OUT>, - <&clk IMX8MM_AUDIO_PLL2_OUT>; - clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", - "pll11k"; - fsl,sai-mclk-direction-output; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai5>; - #sound-dai-cells = <0>; - status = "okay"; -}; - -&sn65dsi83 { - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - bridge_in: endpoint { - remote-endpoint = <&dsi_out>; - data-lanes = <1 2 3 4>; - }; - }; - - port@2 { - reg = <2>; - bridge_out: endpoint { - remote-endpoint = <&panel_in>; - ti,lvds-vod-swing-clock-microvolt = <200000 600000>; - ti,lvds-vod-swing-data-microvolt = <200000 600000>; - }; - }; - }; -}; - -&iomuxc { - - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c2 - MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c2 - >; - }; - - pinctrl_i2c3_gpio: i2c3gpiogrp { - fsl,pins = < - MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x1e2 - MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x1e2 - >; - }; - pinctrl_lcd: lcd0grp { - fsl,pins = < - MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1 0x12 - >; - }; - - pinctrl_pwm4: pwm4grp { - fsl,pins = < - MX8MM_IOMUXC_SAI3_MCLK_PWM4_OUT 0x12 - >; - }; - - pinctrl_sai5: sai5grp { - fsl,pins = < - MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK 0xd6 - MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0 0xd6 - MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0xd6 - MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0xd6 - MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0xd6 - >; - }; - - pinctrl_tlv320: tlv320grp { - fsl,pins = < - MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x16 - MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20 0x16 - >; - }; -}; +#include "imx8mm-phyboard-polis-peb-av-10.dtsi" diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-eval-01.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-eval-01.dtso index a28f51ece93ba6..1059c26990fe6e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-eval-01.dtso +++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-eval-01.dtso @@ -1,7 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) /* * Copyright (C) 2025 PHYTEC Messtechnik GmbH - * Author: Janine Hagemann */ /dts-v1/; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts index be470cfb03d75d..6043e7d1630693 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts @@ -1,7 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) /* * Copyright (C) 2022 PHYTEC Messtechnik GmbH - * Author: Teresa Remmet */ /dts-v1/; @@ -285,6 +284,8 @@ &usbotg1 { over-current-active-low; samsung,picophy-pre-emp-curr-control = <3>; samsung,picophy-dc-vol-level-adjust = <7>; + pinctrl-0 = <&pinctrl_usbotg1>; + pinctrl-names = "default"; srp-disable; vbus-supply = <®_usb_otg1_vbus>; status = "okay"; @@ -458,6 +459,12 @@ MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x00 >; }; + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x00 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x182 diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi index 921a7f58fd41da..3d66c6701342ae 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi @@ -1,7 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) /* * Copyright (C) 2022 PHYTEC Messtechnik GmbH - * Author: Teresa Remmet */ #include "imx8mm.dtsi" @@ -288,6 +287,23 @@ sn65dsi83: bridge@2d { reg = <0x2d>; vcc-supply = <®_vdd_1v8>; status = "disabled"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_in: endpoint { + remote-endpoint = <&mipi_dsi_out>; + data-lanes = <1 2 3 4>; + }; + }; + + port@2 { + reg = <2>; + bridge_out: endpoint {}; + }; + }; }; /* EEPROM */ @@ -305,6 +321,14 @@ rv3028: rtc@52 { }; }; +&mipi_dsi { + samsung,esc-clock-frequency = <10000000>; +}; + +&mipi_dsi_out { + remote-endpoint = <&bridge_in>; +}; + /* eMMC */ &usdhc3 { assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts index 755cf9cacd2274..2ecc8b3c67dabd 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts @@ -452,7 +452,7 @@ MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x00 pinctrl_usbotg1: usbotg1grp { fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x80 + MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x00 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi index 37db4f0dd5052b..dca213c85cc3bc 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi @@ -115,6 +115,7 @@ mdio { ethphy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; + ti,clk-output-sel = ; ti,rx-internal-delay = ; ti,tx-internal-delay = ; tx-fifo-depth = ; @@ -445,7 +446,7 @@ MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 - MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x0 MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi index 752caa38eb03bf..266038fbbef976 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi @@ -351,17 +351,6 @@ MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140 >; }; - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 - MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 - MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 - MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 - MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 - MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 - >; - }; - pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts index c09b40fc6decd4..468c7e993c52bc 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts @@ -253,6 +253,7 @@ mdio { ethphy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; + ti,clk-output-sel = ; ti,rx-internal-delay = ; ti,tx-internal-delay = ; tx-fifo-depth = ; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts index a5f52f60169e96..5aa0e2cd155ec2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts @@ -248,6 +248,7 @@ mdio { ethphy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; + ti,clk-output-sel = ; ti,rx-internal-delay = ; ti,tx-internal-delay = ; tx-fifo-depth = ; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-aipstz.h b/arch/arm64/boot/dts/freescale/imx8mp-aipstz.h new file mode 100644 index 00000000000000..6481c484ca3797 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-aipstz.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */ +/* + * Copyright 2025 NXP + */ + +#ifndef __IMX8MP_AIPSTZ_H +#define __IMX8MP_AIPSTZ_H + +/* consumer type - master or peripheral */ +#define IMX8MP_AIPSTZ_MASTER 0x0 +#define IMX8MP_AIPSTZ_PERIPH 0x1 + +/* master configuration options */ +#define IMX8MP_AIPSTZ_MPL (1 << 0) +#define IMX8MP_AIPSTZ_MTW (1 << 1) +#define IMX8MP_AIPSTZ_MTR (1 << 2) +#define IMX8MP_AIPSTZ_MBW (1 << 3) + +/* peripheral configuration options */ +#define IMX8MP_AIPSTZ_TP (1 << 0) +#define IMX8MP_AIPSTZ_WP (1 << 1) +#define IMX8MP_AIPSTZ_SP (1 << 2) +#define IMX8MP_AIPSTZ_BW (1 << 3) + +/* master ID definitions */ +#define IMX8MP_AIPSTZ_EDMA 0 /* AUDIOMIX EDMA */ +#define IMX8MP_AIPSTZ_CA53 1 /* Cortex-A53 cluster */ +#define IMX8MP_AIPSTZ_SDMA2 3 /* AUDIOMIX SDMA2 */ +#define IMX8MP_AIPSTZ_SDMA3 3 /* AUDIOMIX SDMA3 */ +#define IMX8MP_AIPSTZ_HIFI4 5 /* HIFI4 DSP */ +#define IMX8MP_AIPSTZ_CM7 6 /* Cortex-M7 */ + +#endif /* __IMX8MP_AIPSTZ_H */ diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts index af02af9e5334da..9422beee30b29c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts @@ -96,9 +96,9 @@ mdio { #address-cells = <1>; #size-cells = <0>; - ethphy0: ethernet-phy@0 { /* RTL8211E */ + ethphy0: ethernet-phy@1 { /* RTL8211E */ compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; + reg = <1>; reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>; reset-assert-us = <20>; reset-deassert-us = <200000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts index d241db3743a9c7..04619a7229065b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts @@ -22,6 +22,18 @@ chosen { stdout-path = &uart2; }; + hdmi-connector { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_out>; + }; + }; + }; + reg_baseboard_vdd3v3: regulator-baseboard-vdd3v3 { compatible = "regulator-fixed"; regulator-min-microvolt = <3300000>; @@ -222,6 +234,28 @@ flash: flash@0 { }; }; +&hdmi_pvi { + status = "okay"; +}; + +&hdmi_tx { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi>; + status = "okay"; + + ports { + port@1 { + hdmi_tx_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; +}; + +&hdmi_tx_phy { + status = "okay"; +}; + &i2c4 { expander0: gpio@20 { compatible = "nxp,pca9535"; @@ -276,6 +310,10 @@ ethmac2: mac-address@c { }; }; +&lcdif3 { + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; }; @@ -430,6 +468,15 @@ MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82 >; }; + pinctrl_hdmi: hdmigrp { + fsl,pins = < + MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x1c3 + MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x1c3 + MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x19 + MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x19 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts index ebdf13e97b4e2d..3d18c964a22cd9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts @@ -88,6 +88,7 @@ led-0 { color = ; default-state = "off"; function = LED_FUNCTION_INDICATOR; + function-enumerator = <0>; gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* GPIO E */ pinctrl-0 = <&pinctrl_dhcom_e>; pinctrl-names = "default"; @@ -97,6 +98,7 @@ led-1 { color = ; default-state = "off"; function = LED_FUNCTION_INDICATOR; + function-enumerator = <1>; gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* GPIO F */ pinctrl-0 = <&pinctrl_dhcom_f>; pinctrl-names = "default"; @@ -106,6 +108,7 @@ led-2 { color = ; default-state = "off"; function = LED_FUNCTION_INDICATOR; + function-enumerator = <2>; gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; /* GPIO H */ pinctrl-0 = <&pinctrl_dhcom_h>; pinctrl-names = "default"; @@ -115,6 +118,7 @@ led-3 { color = ; default-state = "off"; function = LED_FUNCTION_INDICATOR; + function-enumerator = <3>; gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; /* GPIO I */ pinctrl-0 = <&pinctrl_dhcom_i>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi index 68c2e0156a5c81..f8303b7e2bd22b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi @@ -113,6 +113,7 @@ mdio { ethphy0f: ethernet-phy@1 { /* SMSC LAN8740Ai */ compatible = "ethernet-phy-id0007.c110", "ethernet-phy-ieee802.3-c22"; + clocks = <&clk IMX8MP_CLK_ENET_QOS>; interrupt-parent = <&gpio3>; interrupts = <19 IRQ_TYPE_LEVEL_LOW>; pinctrl-0 = <&pinctrl_ethphy0>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index 3730792daf5010..c6facb2ad9aaa2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -442,6 +442,10 @@ &flexcan2 { status = "disabled";/* can2 pin conflict with pdm */ }; +&hdmi_pai { + status = "okay"; +}; + &hdmi_pvi { status = "okay"; }; @@ -710,6 +714,8 @@ &pcie0 { pinctrl-0 = <&pinctrl_pcie0>; reset-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>; vpcie-supply = <®_pcie0>; + vpcie3v3aux-supply = <®_pcie0>; + supports-clkreq; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-etml1010g3dra.dtso b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-etml1010g3dra.dtso new file mode 100644 index 00000000000000..7a7f27d6bb1be6 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-etml1010g3dra.dtso @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + */ + +#include +#include + +/dts-v1/; +/plugin/; + +&backlight_lvds1 { + brightness-levels = <0 8 16 32 64 128 255>; + default-brightness-level = <8>; + enable-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; + num-interpolated-steps = <2>; + pwms = <&pwm3 0 50000 0>; + status = "okay"; +}; + +&lcdif2 { + status = "okay"; +}; + +&lvds_bridge { + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, <&clk IMX8MP_VIDEO_PLL1>; + assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>; + /* + * The LVDS panel uses 72.4 MHz pixel clock, set IMX8MP_VIDEO_PLL1 to + * 72.4 * 7 = 506.8 MHz so the LDB serializer and LCDIFv3 scanout + * engine can reach accurate pixel clock of exactly 72.4 MHz. + */ + assigned-clock-rates = <0>, <506800000>; + status = "okay"; +}; + +&panel_lvds1 { + compatible = "edt,etml1010g3dra"; + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtso b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtso new file mode 100644 index 00000000000000..aceb5b6056ef12 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-etml1010g3dra.dtso @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + */ + +/dts-v1/; +/plugin/; + +#include +#include +#include "imx8mp-phyboard-pollux-peb-av-10.dtsi" + +&backlight_lvds0 { + brightness-levels = <0 8 16 32 64 128 255>; + default-brightness-level = <8>; + enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + num-interpolated-steps = <2>; + pwms = <&pwm4 0 50000 0>; + status = "okay"; +}; + +&lcdif2 { + status = "okay"; +}; + +&lvds_bridge { + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, <&clk IMX8MP_VIDEO_PLL1>; + assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>; + /* + * The LVDS panel uses 72.4 MHz pixel clock, set IMX8MP_VIDEO_PLL1 to + * 72.4 * 7 = 506.8 MHz so the LDB serializer and LCDIFv3 scanout + * engine can reach accurate pixel clock of exactly 72.4 MHz. + */ + assigned-clock-rates = <0>, <506800000>; + status = "okay"; +}; + +&panel_lvds0 { + compatible = "edt,etml1010g3dra"; + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtso b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtso new file mode 100644 index 00000000000000..559286f384be45 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10-ph128800t006.dtso @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + */ + +/dts-v1/; +/plugin/; + +#include +#include +#include "imx8mp-phyboard-pollux-peb-av-10.dtsi" + +&backlight_lvds0 { + brightness-levels = <0 8 16 32 64 128 255>; + default-brightness-level = <8>; + enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + num-interpolated-steps = <2>; + pwms = <&pwm4 0 66667 0>; + status = "okay"; +}; + +&lcdif2 { + status = "okay"; +}; + +&lvds_bridge { + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, <&clk IMX8MP_VIDEO_PLL1>; + assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>; + /* + * The LVDS panel uses 66.5 MHz pixel clock, set IMX8MP_VIDEO_PLL1 to + * 66.5 * 7 = 465.5 MHz so the LDB serializer and LCDIFv3 scanout + * engine can reach accurate pixel clock of exactly 66.5 MHz. + */ + assigned-clock-rates = <0>, <465500000>; + status = "okay"; +}; + +&panel_lvds0 { + compatible = "powertip,ph128800t006-zhc01"; + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10.dtsi new file mode 100644 index 00000000000000..bb740f845855ac --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10.dtsi @@ -0,0 +1,198 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + */ + +#include +#include +#include "imx8mp-pinfunc.h" + +&{/} { + backlight_lvds0: backlight0 { + compatible = "pwm-backlight"; + pinctrl-0 = <&pinctrl_lvds0>; + pinctrl-names = "default"; + power-supply = <®_vcc_12v>; + status = "disabled"; + }; + + panel_lvds0: panel-lvds0 { + backlight = <&backlight_lvds0>; + power-supply = <®_vcc_3v3_sw>; + status = "disabled"; + + port { + panel0_in: endpoint { + remote-endpoint = <&ldb_lvds_ch0>; + }; + }; + }; + + reg_vcc_12v: regulator-12v { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <12000000>; + regulator-min-microvolt = <12000000>; + regulator-name = "VCC_12V"; + }; + + reg_vcc_1v8_audio: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "VCC_1V8_Audio"; + }; + + reg_vcc_3v3_analog: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VCC_3V3_Analog"; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "snd-peb-av-10"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,mclk-fs = <32>; + simple-audio-card,widgets = + "Line", "Line In", + "Speaker", "Speaker", + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Speaker", "SPOP", + "Speaker", "SPOM", + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE1L", "Line In", + "LINE1R", "Line In", + "MIC3R", "Microphone Jack", + "Microphone Jack", "Mic Bias"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&codec>; + clocks = <&clk IMX8MP_CLK_SAI2>; + }; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + pinctrl-0 = <&pinctrl_i2c4>; + pinctrl-1 = <&pinctrl_i2c4_gpio>; + pinctrl-names = "default", "gpio"; + scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + codec: codec@18 { + compatible = "ti,tlv320aic3007"; + reg = <0x18>; + pinctrl-0 = <&pinctrl_tlv320>; + pinctrl-names = "default"; + #sound-dai-cells = <0>; + reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + ai3x-gpio-func = <0xd 0x0>; + ai3x-micbias-vg = <2>; + AVDD-supply = <®_vcc_3v3_analog>; + DRVDD-supply = <®_vcc_3v3_analog>; + DVDD-supply = <®_vcc_1v8_audio>; + IOVDD-supply = <®_vcc_3v3_sw>; + }; + + eeprom@57 { + compatible = "atmel,24c32"; + reg = <0x57>; + pagesize = <32>; + vcc-supply = <®_vcc_3v3_sw>; + }; +}; + +&ldb_lvds_ch0 { + remote-endpoint = <&panel0_in>; +}; + +&pwm4 { + pinctrl-0 = <&pinctrl_pwm4>; + pinctrl-names = "default"; +}; + +&sai2 { + pinctrl-0 = <&pinctrl_sai2>; + pinctrl-names = "default"; + assigned-clocks = <&clk IMX8MP_CLK_SAI2>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>; + assigned-clock-rates = <12288000>; + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_IPG>, + <&clk IMX8MP_CLK_DUMMY>, + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI2_MCLK1>, + <&clk IMX8MP_CLK_DUMMY>, + <&clk IMX8MP_CLK_DUMMY>, + <&clk IMX8MP_AUDIO_PLL1_OUT>, + <&clk IMX8MP_AUDIO_PLL2_OUT>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", + "pll11k"; + #sound-dai-cells = <0>; + fsl,sai-mclk-direction-output; + fsl,sai-synchronous-rx; + status = "okay"; +}; + +&iomuxc { + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c2 + MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c2 + >; + }; + + pinctrl_i2c4_gpio: i2c4gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20 0x1e2 + MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x1e2 + >; + }; + + pinctrl_lvds0: lvds0grp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01 0x12 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT 0x12 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK 0xd6 + MX8MP_IOMUXC_SAI2_RXFS__AUDIOMIX_SAI2_RX_SYNC 0xd6 + MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK 0xd6 + MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6 + MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00 0xd6 + >; + }; + + pinctrl_tlv320: tlv320grp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x16 + MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x16 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10.dtso b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10.dtso new file mode 100644 index 00000000000000..95078618ee095a --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-peb-av-10.dtso @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + */ + +/dts-v1/; +/plugin/; + +#include "imx8mp-phyboard-pollux-peb-av-10.dtsi" diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-ph128800t006.dtso b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-ph128800t006.dtso new file mode 100644 index 00000000000000..a39f83bf820490 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-ph128800t006.dtso @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + */ + +#include +#include + +/dts-v1/; +/plugin/; + +&backlight_lvds1 { + brightness-levels = <0 8 16 32 64 128 255>; + default-brightness-level = <8>; + enable-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; + num-interpolated-steps = <2>; + pwms = <&pwm3 0 66667 0>; + status = "okay"; +}; + +&lcdif2 { + status = "okay"; +}; + +&lvds_bridge { + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, <&clk IMX8MP_VIDEO_PLL1>; + assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>; + /* + * The LVDS panel uses 72.4 MHz pixel clock, set IMX8MP_VIDEO_PLL1 to + * 66.5 * 7 = 465.5 MHz so the LDB serializer and LCDIFv3 scanout + * engine can reach accurate pixel clock of exactly 66.5 MHz. + */ + assigned-clock-rates = <0>, <465500000>; + status = "okay"; +}; + + +&panel_lvds1 { + compatible = "powertip,ph128800t006-zhc01"; + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts index 43615230864227..9687b4ded8f4c9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts @@ -1,14 +1,12 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright (C) 2020 PHYTEC Messtechnik GmbH - * Author: Teresa Remmet */ /dts-v1/; #include #include -#include #include #include "imx8mp-phycore-som.dtsi" @@ -21,16 +19,12 @@ chosen { stdout-path = &uart1; }; - backlight_lvds: backlight { + backlight_lvds1: backlight1 { compatible = "pwm-backlight"; - pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lvds1>; - brightness-levels = <0 4 8 16 32 64 128 255>; - default-brightness-level = <11>; - enable-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; - num-interpolated-steps = <2>; + pinctrl-names = "default"; power-supply = <®_lvds1_reg_en>; - pwms = <&pwm3 0 50000 0>; + status = "disabled"; }; fan0: fan { @@ -43,10 +37,11 @@ fan0: fan { #cooling-cells = <2>; }; - panel1_lvds: panel-lvds { - compatible = "edt,etml1010g3dra"; - backlight = <&backlight_lvds>; + panel_lvds1: panel-lvds1 { + /* compatible panel in overlay */ + backlight = <&backlight_lvds1>; power-supply = <®_vcc_3v3_sw>; + status = "disabled"; port { panel1_in: endpoint { @@ -232,32 +227,8 @@ led-3 { }; }; -&lcdif2 { - status = "okay"; -}; - -&lvds_bridge { - status = "okay"; - - ports { - port@2 { - ldb_lvds_ch1: endpoint { - remote-endpoint = <&panel1_in>; - }; - }; - }; -}; - -&media_blk_ctrl { - /* - * The LVDS panel on this device uses 72.4 MHz pixel clock, - * set IMX8MP_VIDEO_PLL1 to 72.4 * 7 = 506.8 MHz so the LDB - * serializer and LCDIFv3 scanout engine can reach accurate - * pixel clock of exactly 72.4 MHz. - */ - assigned-clock-rates = <500000000>, <200000000>, - <0>, <0>, <500000000>, - <506800000>; +&ldb_lvds_ch1 { + remote-endpoint = <&panel1_in>; }; &snvs_pwrkey { @@ -282,9 +253,8 @@ &pcie { }; &pwm3 { - status = "okay"; - pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; + pinctrl-names = "default"; }; &rv3028 { diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi index 04f724c6ec210b..88831c0fbb7be3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi @@ -1,7 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0 +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright (C) 2020 PHYTEC Messtechnik GmbH - * Author: Teresa Remmet */ #include diff --git a/arch/arm64/boot/dts/freescale/imx8mp-prt8ml.dts b/arch/arm64/boot/dts/freescale/imx8mp-prt8ml.dts new file mode 100644 index 00000000000000..30616218017b2a --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-prt8ml.dts @@ -0,0 +1,504 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2020 Protonic Holland + * Copyright 2019 NXP + */ + +/dts-v1/; + +#include "imx8mp.dtsi" + +/ { + model = "Protonic PRT8ML"; + compatible = "prt,prt8ml", "fsl,imx8mp"; + + chosen { + stdout-path = &uart4; + }; + + pcie_refclk: pcie0-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + pcie_refclk_oe: pcie0-refclk-oe { + compatible = "gpio-gate-clock"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_refclk>; + clocks = <&pcie_refclk>; + #clock-cells = <0>; + enable-gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; + }; +}; + +&A53_0 { + cpu-supply = <&fan53555>; +}; + +&A53_1 { + cpu-supply = <&fan53555>; +}; + +&A53_2 { + cpu-supply = <&fan53555>; +}; + +&A53_3 { + cpu-supply = <&fan53555>; +}; + +&a53_opp_table { + opp-1200000000 { + opp-microvolt = <900000>; + }; + + opp-1600000000 { + opp-microvolt = <980000>; + }; + + /* Power supply insuffient for 1.8 GHz */ + /delete-node/ opp-1800000000; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH>; + + /* Disable DMA to meet performance requirements */ + /delete-property/ dmas; + /delete-property/ dma-names; + status = "okay"; + + switch@0 { + compatible = "nxp,sja1105q"; + reg = <0>; + reset-gpios = <&gpio_exp_1 4 GPIO_ACTIVE_LOW>; + spi-cpha; + spi-max-frequency = <4000000>; + spi-rx-delay-us = <1>; + spi-tx-delay-us = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@3 { + reg = <3>; + label = "rj45"; + phy-handle = <&rj45_phy>; + phy-mode = "rgmii-id"; + }; + + port@4 { + reg = <4>; + ethernet = <&fec>; + label = "cpu"; + phy-mode = "rgmii-id"; + rx-internal-delay-ps = <2000>; + tx-internal-delay-ps = <2000>; + + /* Unreliable at 1000Mbps, limit RGMII to 100Mbps */ + fixed-link { + full-duplex; + speed = <100>; + }; + }; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rgmii"; /* switch inserts delay */ + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <0>; + status = "okay"; + + fixed-link { + full-duplex; + speed = <100>; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + rj45_phy: ethernet-phy@2 { + reg = <2>; + reset-gpios = <&gpio_exp_1 1 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <80000>; + }; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + ak5558: codec@10 { + compatible = "asahi-kasei,ak5558"; + reg = <0x10>; + reset-gpios = <&gpio_exp_1 2 GPIO_ACTIVE_LOW>; + }; + + gpio_exp_1: gpio@25 { + compatible = "nxp,pca9571"; + reg = <0x25>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + tps65987ddh_0: usb-pd@20 { + compatible = "ti,tps6598x"; + reg = <0x20>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tps65987ddh_0>; + interrupts-extended = <&gpio1 12 IRQ_TYPE_LEVEL_LOW>; + }; + + gpio_exp_2: gpio@25 { + compatible = "nxp,pca9571"; + reg = <0x25>; + gpio-controller; + #gpio-cells = <2>; + + c0-hreset-hog { + gpio-hog; + gpios = <7 GPIO_ACTIVE_LOW>; + line-name = "c0-hreset"; + output-low; + }; + + c1-hreset-hog { + gpio-hog; + gpios = <6 GPIO_ACTIVE_LOW>; + line-name = "c1-hreset"; + output-low; + }; + }; + + fan53555: regulator@60 { + compatible = "fcs,fan53555"; + reg = <0x60>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fan53555>; + regulator-name = "fan53555"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <980000>; + regulator-always-on; + regulator-boot-on; + fcs,suspend-voltage-selector = <1>; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + ak4458: codec@11 { + compatible = "asahi-kasei,ak4458"; + reg = <0x11>; + #sound-dai-cells = <0>; + reset-gpios = <&gpio_exp_2 5 GPIO_ACTIVE_LOW>; + }; + + tps65987ddh_1: usb-pd@20 { + compatible = "ti,tps6598x"; + reg = <0x20>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tps65987ddh_1>; + interrupts-extended = <&gpio1 15 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&lcdif1 { + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usb3_0 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "host"; + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + assigned-clocks = <&clk IMX8MP_CLK_USDHC2>; + assigned-clock-rates = <100000000>; + bus-width = <4>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + no-1-8-v; + sd-uhs-sdr12; + sd-uhs-sdr25; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clk IMX8MP_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; + bus-width = <8>; + non-removable; + no-sdio; + no-sd; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x154 + MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x154 + MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x154 + MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x154 + >; + }; + + pinctrl_fan53555: fan53555grp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x114 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3 + MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3 + MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91 + MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91 + MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91 + MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91 + MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91 + MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f + MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f + MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f + MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f + MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154 + MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX8MP_IOMUXC_UART3_TXD__CAN2_RX 0x154 + MX8MP_IOMUXC_UART3_RXD__CAN2_TX 0x154 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI1_SCLK__I2C1_SCL 0x400000c3 + MX8MP_IOMUXC_ECSPI1_MOSI__I2C1_SDA 0x400000c3 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400000c3 + MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400000c3 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400000c3 + MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400000c3 + >; + }; + + pinctrl_pcie_refclk: pcierefclkgrp { + fsl,pins = < + MX8MP_IOMUXC_UART1_TXD__GPIO5_IO23 0xc6 + >; + }; + + pinctrl_tps65987ddh_0: tps65987ddh-0grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x1d0 + >; + }; + + pinctrl_tps65987ddh_1: tps65987ddh-1grp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x1d0 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x040 + MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x040 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2-gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x0d4 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x166 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-hdmi.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-hdmi.dts new file mode 100644 index 00000000000000..c263e8fd048464 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-hdmi.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +#include "imx8mp-skov-revb-hdmi.dts" + +/ { + model = "SKOV IMX8MP CPU revC - HDMI"; + compatible = "skov,imx8mp-skov-revc-hdmi", "fsl,imx8mp"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-jutouch-jt101tm023.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-jutouch-jt101tm023.dts new file mode 100644 index 00000000000000..3e320d6dea3a27 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revc-jutouch-jt101tm023.dts @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; + +#include "imx8mp-skov-reva.dtsi" + +/ { + model = "SKOV IMX8MP CPU revC - JuTouch JT101TM023"; + compatible = "skov,imx8mp-skov-revc-jutouch-jt101tm023", "fsl,imx8mp"; + + panel { + compatible = "jutouch,jt101tm023"; + backlight = <&backlight>; + power-supply = <®_tft_vcom>; + + port { + in_lvds0: endpoint { + remote-endpoint = <&ldb_lvds_ch0>; + }; + }; + }; +}; + +&backlight { + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + status = "okay"; + + touchscreen@2a { + compatible = "eeti,exc81w32", "eeti,exc80h84"; + reg = <0x2a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>; + interrupts-extended = <&gpio4 28 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <1280>; + touchscreen-size-y = <800>; + vdd-supply = <®_vdd_3v3>; + }; +}; + +&lcdif2 { + status = "okay"; +}; + +&lvds_bridge { + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, + <&clk IMX8MP_VIDEO_PLL1>; + assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>; + /* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_DISP2_PIX * 7 */ + assigned-clock-rates = <0>, <506800000>; + status = "okay"; + + ports { + port@1 { + ldb_lvds_ch0: endpoint { + remote-endpoint = <&in_lvds0>; + }; + }; + }; +}; + +&pwm4 { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +®_tft_vcom { + regulator-min-microvolt = <3160000>; + regulator-max-microvolt = <3160000>; + voltage-table = <3160000 73>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts index 4eedd00d83b9fc..59642a8a2c445d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts @@ -238,6 +238,13 @@ sound { audio-asrc = <&easrc>; audio-cpu = <&sai3>; audio-codec = <&tlv320aic3x04>; + audio-routing = + "IN3_L", "Mic Jack", + "Mic Jack", "Mic Bias", + "IN1_L", "Line In Jack", + "IN1_R", "Line In Jack", + "Line Out Jack", "LOL", + "Line Out Jack", "LOR"; }; thermal-zones { diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts index 88ad422c27603b..399230144ce39c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts @@ -9,7 +9,7 @@ #include "imx8mp-tx8p-ml81.dtsi" / { - compatible = "gocontroll,moduline-display", "fsl,imx8mp"; + compatible = "gocontroll,moduline-display-106", "karo,tx8p-ml81", "fsl,imx8mp"; chassis-type = "embedded"; hardware = "Moduline Display V1.06"; model = "GOcontroll Moduline Display baseboard"; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi index fe8ba16eb40e71..761ee046eb72ef 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi @@ -47,6 +47,7 @@ &eqos { <&clk IMX8MP_SYS_PLL2_100M>, <&clk IMX8MP_SYS_PLL2_50M>; assigned-clock-rates = <266000000>, <100000000>, <50000000>; + nvmem-cells = <ð_mac1>; phy-handle = <ðphy0>; phy-mode = "rmii"; pinctrl-0 = <&pinctrl_eqos>; @@ -75,6 +76,10 @@ ethphy0: ethernet-phy@0 { }; }; +&fec { + nvmem-cells = <ð_mac2>; +}; + &gpio1 { gpio-line-names = "SODIMM_152", "SODIMM_42", diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi index cbf0c9a740faa6..de852ebff57128 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi @@ -101,6 +101,7 @@ ethphy0: ethernet-phy@0 { reg = <0x0>; interrupt-parent = <&gpio3>; interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + ti,clk-output-sel = ; ti,rx-internal-delay = ; ti,tx-internal-delay = ; tx-fifo-depth = ; @@ -395,13 +396,6 @@ &i2c3 { status = "okay"; }; -/* off-board header */ -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - /* console */ &uart2 { pinctrl-names = "default"; @@ -409,25 +403,6 @@ &uart2 { status = "okay"; }; -/* off-board header */ -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - status = "okay"; -}; - -/* off-board */ -&usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - bus-width = <4>; - non-removable; - status = "okay"; - bus-width = <4>; - non-removable; - status = "okay"; -}; - /* eMMC */ &usdhc3 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; @@ -464,7 +439,7 @@ MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x16 MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x16 MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x16 MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x16 - MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x16 + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x0 >; }; @@ -523,13 +498,6 @@ MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x400001c2 >; }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140 - MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140 - >; - }; - pinctrl_uart2: uart2grp { fsl,pins = < MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140 @@ -537,24 +505,6 @@ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140 >; }; - pinctrl_uart3: uart3grp { - fsl,pins = < - MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x140 - MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x140 - >; - }; - - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190 - MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0 - MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0 - MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0 - MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0 - MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0 - >; - }; - pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi index cf747ec6fa16eb..76020ef89bf3e8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi @@ -365,17 +365,6 @@ MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x140 >; }; - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190 - MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0 - MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0 - MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0 - MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0 - MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0 - >; - }; - pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts index 12de7cf1e8538e..7662663ff5dad8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts @@ -228,6 +228,7 @@ mdio { ethphy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0x0>; + ti,clk-output-sel = ; ti,rx-internal-delay = ; ti,tx-internal-delay = ; tx-fifo-depth = ; diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index a3de6604e29f25..9b2b3a9bf9e80c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -13,6 +13,7 @@ #include #include +#include "imx8mp-aipstz.h" #include "imx8mp-pinfunc.h" / { @@ -80,6 +81,12 @@ A53_0: cpu@0 { operating-points-v2 = <&a53_opp_table>; #cooling-cells = <2>; cpu-idle-states = <&cpu_pd_wait>; + + cpu0_therm: thermal-idle { + #cooling-cells = <2>; + duration-us = <10000>; + exit-latency-us = <700>; + }; }; A53_1: cpu@1 { @@ -98,6 +105,12 @@ A53_1: cpu@1 { operating-points-v2 = <&a53_opp_table>; #cooling-cells = <2>; cpu-idle-states = <&cpu_pd_wait>; + + cpu1_therm: thermal-idle { + #cooling-cells = <2>; + duration-us = <10000>; + exit-latency-us = <700>; + }; }; A53_2: cpu@2 { @@ -116,6 +129,12 @@ A53_2: cpu@2 { operating-points-v2 = <&a53_opp_table>; #cooling-cells = <2>; cpu-idle-states = <&cpu_pd_wait>; + + cpu2_therm: thermal-idle { + #cooling-cells = <2>; + duration-us = <10000>; + exit-latency-us = <700>; + }; }; A53_3: cpu@3 { @@ -134,6 +153,12 @@ A53_3: cpu@3 { operating-points-v2 = <&a53_opp_table>; #cooling-cells = <2>; cpu-idle-states = <&cpu_pd_wait>; + + cpu3_therm: thermal-idle { + #cooling-cells = <2>; + duration-us = <10000>; + exit-latency-us = <700>; + }; }; A53_L2: l2-cache0 { @@ -323,7 +348,11 @@ map0 { <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&gpu3d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&gpu2d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&npu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&npu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu0_therm 0 50>, + <&cpu1_therm 0 50>, + <&cpu2_therm 0 50>, + <&cpu3_therm 0 50>; }; }; }; @@ -356,7 +385,11 @@ map0 { <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&gpu3d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&gpu2d THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&npu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&npu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu0_therm 0 50>, + <&cpu1_therm 0 50>, + <&cpu2_therm 0 50>, + <&cpu3_therm 0 50>; }; }; }; @@ -1396,12 +1429,14 @@ eqos: ethernet@30bf0000 { }; }; - aips5: bus@30c00000 { - compatible = "fsl,aips-bus", "simple-bus"; - reg = <0x30c00000 0x400000>; + aips5: bus@30df0000 { + compatible = "fsl,imx8mp-aipstz"; + reg = <0x30df0000 0x10000>; + power-domains = <&pgc_audio>; #address-cells = <1>; #size-cells = <1>; - ranges; + #access-controller-cells = <3>; + ranges = <0x30c00000 0x30c00000 0x400000>; spba-bus@30c00000 { compatible = "fsl,spba-bus", "simple-bus"; @@ -1770,6 +1805,7 @@ mipi_csi_0: csi@32e40000 { assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_250M>, <&clk IMX8MP_CLK_24M>; power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>; + fsl,num-channels = <3>; status = "disabled"; ports { @@ -1805,6 +1841,7 @@ mipi_csi_1: csi@32e50000 { assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_250M>, <&clk IMX8MP_CLK_24M>; power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_2>; + fsl,num-channels = <3>; status = "disabled"; ports { @@ -2073,7 +2110,7 @@ irqsteer_hdmi: interrupt-controller@32fc2000 { hdmi_pvi: display-bridge@32fc4000 { compatible = "fsl,imx8mp-hdmi-pvi"; - reg = <0x32fc4000 0x1000>; + reg = <0x32fc4000 0x800>; interrupt-parent = <&irqsteer_hdmi>; interrupts = <12>; power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>; @@ -2099,6 +2136,23 @@ pvi_to_hdmi_tx: endpoint { }; }; + hdmi_pai: audio-bridge@32fc4800 { + compatible = "fsl,imx8mp-hdmi-pai"; + reg = <0x32fc4800 0x800>; + interrupt-parent = <&irqsteer_hdmi>; + interrupts = <14>; + clocks = <&clk IMX8MP_CLK_HDMI_APB>; + clock-names = "apb"; + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PAI>; + status = "disabled"; + + port { + pai_to_hdmi_tx: endpoint { + remote-endpoint = <&hdmi_tx_from_pai>; + }; + }; + }; + lcdif3: display-controller@32fc6000 { compatible = "fsl,imx8mp-lcdif"; reg = <0x32fc6000 0x1000>; @@ -2150,6 +2204,14 @@ port@1 { reg = <1>; /* Point endpoint to the HDMI connector */ }; + + port@2 { + reg = <2>; + + hdmi_tx_from_pai: endpoint { + remote-endpoint = <&pai_to_hdmi_tx>; + }; + }; }; }; @@ -2445,6 +2507,11 @@ dsp: dsp@3b6e8000 { firmware-name = "imx/dsp/hifi4.bin"; resets = <&audio_blk_ctrl IMX8MP_AUDIOMIX_DSP_RUNSTALL>; reset-names = "runstall"; + access-controllers = <&aips5 + IMX8MP_AIPSTZ_HIFI4 + IMX8MP_AIPSTZ_MASTER + (IMX8MP_AIPSTZ_MPL | IMX8MP_AIPSTZ_MTW | IMX8MP_AIPSTZ_MTR) + >; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index a88bc903466363..d48f901487d49a 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -375,6 +375,7 @@ &pcie0 { <&clk IMX8MQ_CLK_PCIE1_PHY>, <&clk IMX8MQ_CLK_PCIE1_AUX>; vph-supply = <&vgen5_reg>; + supports-clkreq; status = "okay"; }; @@ -397,7 +398,9 @@ &pcie1 { <&clk IMX8MQ_CLK_PCIE2_PHY>, <&clk IMX8MQ_CLK_PCIE2_AUX>; vpcie-supply = <®_pcie1>; + vpcie3v3aux-supply = <®_pcie1>; vph-supply = <&vgen5_reg>; + supports-clkreq; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi index b1c3f331c4ed06..8a37cbe922accb 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis-v1.1.dtsi @@ -11,4 +11,12 @@ / { model = "Toradex Apalis iMX8QM V1.1"; }; -/* TODO: Cooling Maps */ +&cooling_maps_map0 { + cooling-device = + <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A72_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A72_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi index f97feee52c8186..7594ac61fe5613 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm-apalis.dtsi @@ -314,8 +314,6 @@ &pinctrl_pcie_sata_refclk { ; }; -/* TODO: On-module Wi-Fi */ - /* Apalis MMC1 */ &usdhc2 { /* diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts index 9c0b6b8d6459de..f1b0563d3a0904 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts @@ -249,6 +249,13 @@ reg_2v8: regulator-2v8 { regulator-max-microvolt = <2800000>; }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_usdhc2_vmmc: usdhc2-vmmc { compatible = "regulator-fixed"; regulator-name = "SD1_SPWR"; @@ -256,6 +263,7 @@ reg_usdhc2_vmmc: usdhc2-vmmc { regulator-max-microvolt = <3000000>; gpio = <&lsio_gpio4 7 GPIO_ACTIVE_HIGH>; enable-active-high; + off-on-delay-us = <4800>; }; reg_audio: regulator-audio { @@ -323,6 +331,15 @@ reg_pciea: regulator-pcie { enable-active-high; }; + reg_usb_otg1_vbus: regulator-usbotg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&lsio_gpio4 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_vref_1v8: regulator-adc-vref { compatible = "regulator-fixed"; regulator-name = "vref_1v8"; @@ -560,12 +577,14 @@ light-sensor@44 { compatible = "isil,isl29023"; reg = <0x44>; interrupt-parent = <&lsio_gpio4>; - interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; }; pressure-sensor@60 { compatible = "fsl,mpl3115"; reg = <0x60>; + vdd-supply = <®_3v3>; + vddio-supply = <®_3v3>; }; max7322: gpio@68 { @@ -686,6 +705,16 @@ &lpuart0 { status = "okay"; }; +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart1>; + status = "okay"; + + bluetooth { + compatible = "nxp,88w8987-bt"; + }; +}; + &lpuart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart2>; @@ -775,6 +804,8 @@ &pciea { pinctrl-names = "default"; reset-gpio = <&lsio_gpio4 29 GPIO_ACTIVE_LOW>; vpcie-supply = <®_pciea>; + vpcie3v3aux-supply = <®_pciea>; + supports-clkreq; status = "okay"; }; @@ -800,8 +831,12 @@ &pwm_lvds1 { }; &usdhc1 { - pinctrl-names = "default"; + assigned-clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1>; + pinctrl-2 = <&pinctrl_usdhc1>; bus-width = <8>; no-sd; no-sdio; @@ -810,8 +845,10 @@ &usdhc1 { }; &usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; bus-width = <4>; vmmc-supply = <®_usdhc2_vmmc>; cd-gpios = <&lsio_gpio5 22 GPIO_ACTIVE_LOW>; @@ -819,10 +856,25 @@ &usdhc2 { status = "okay"; }; +&usbphy1 { + status = "okay"; +}; + &usb3_phy { status = "okay"; }; +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + srp-disable; + hnp-disable; + adp-disable; + disable-over-current; + status = "okay"; +}; + &usbotg3 { status = "okay"; }; @@ -896,6 +948,38 @@ &vpu_dsp { status = "okay"; }; +&thermal_zones { + pmic-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tsens IMX_SC_R_PMIC_0>; + + trips { + pmic_alert0: trip0 { + temperature = <110000>; + hysteresis = <2000>; + type = "passive"; + }; + + pmic_crit0: trip1 { + temperature = <125000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&pmic_alert0>; + cooling-device = <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; @@ -1011,38 +1095,38 @@ IMX8QM_SPI2_CS0_LSIO_GPIO3_IO10 0x21 pinctrl_mipi0_lpi2c0: mipi0_lpi2c0grp { fsl,pins = < - IMX8QM_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL 0xc6000020 - IMX8QM_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA 0xc6000020 - IMX8QM_MIPI_DSI0_GPIO0_01_LSIO_GPIO1_IO19 0x00000020 + IMX8QM_MIPI_DSI0_I2C0_SCL_MIPI_DSI0_I2C0_SCL 0xc6000020 + IMX8QM_MIPI_DSI0_I2C0_SDA_MIPI_DSI0_I2C0_SDA 0xc6000020 + IMX8QM_MIPI_DSI0_GPIO0_01_LSIO_GPIO1_IO19 0x00000020 >; }; pinctrl_mipi1_lpi2c0: mipi1_lpi2c0grp { fsl,pins = < - IMX8QM_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL 0xc6000020 - IMX8QM_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA 0xc6000020 - IMX8QM_MIPI_DSI1_GPIO0_01_LSIO_GPIO1_IO23 0x00000020 + IMX8QM_MIPI_DSI1_I2C0_SCL_MIPI_DSI1_I2C0_SCL 0xc6000020 + IMX8QM_MIPI_DSI1_I2C0_SDA_MIPI_DSI1_I2C0_SDA 0xc6000020 + IMX8QM_MIPI_DSI1_GPIO0_01_LSIO_GPIO1_IO23 0x00000020 >; }; pinctrl_flexspi0: flexspi0grp { fsl,pins = < - IMX8QM_QSPI0A_DATA0_LSIO_QSPI0A_DATA0 0x06000021 - IMX8QM_QSPI0A_DATA1_LSIO_QSPI0A_DATA1 0x06000021 - IMX8QM_QSPI0A_DATA2_LSIO_QSPI0A_DATA2 0x06000021 - IMX8QM_QSPI0A_DATA3_LSIO_QSPI0A_DATA3 0x06000021 - IMX8QM_QSPI0A_DQS_LSIO_QSPI0A_DQS 0x06000021 - IMX8QM_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B 0x06000021 - IMX8QM_QSPI0A_SS1_B_LSIO_QSPI0A_SS1_B 0x06000021 - IMX8QM_QSPI0A_SCLK_LSIO_QSPI0A_SCLK 0x06000021 - IMX8QM_QSPI0B_SCLK_LSIO_QSPI0B_SCLK 0x06000021 - IMX8QM_QSPI0B_DATA0_LSIO_QSPI0B_DATA0 0x06000021 - IMX8QM_QSPI0B_DATA1_LSIO_QSPI0B_DATA1 0x06000021 - IMX8QM_QSPI0B_DATA2_LSIO_QSPI0B_DATA2 0x06000021 - IMX8QM_QSPI0B_DATA3_LSIO_QSPI0B_DATA3 0x06000021 - IMX8QM_QSPI0B_DQS_LSIO_QSPI0B_DQS 0x06000021 - IMX8QM_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B 0x06000021 - IMX8QM_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B 0x06000021 + IMX8QM_QSPI0A_DATA0_LSIO_QSPI0A_DATA0 0x06000021 + IMX8QM_QSPI0A_DATA1_LSIO_QSPI0A_DATA1 0x06000021 + IMX8QM_QSPI0A_DATA2_LSIO_QSPI0A_DATA2 0x06000021 + IMX8QM_QSPI0A_DATA3_LSIO_QSPI0A_DATA3 0x06000021 + IMX8QM_QSPI0A_DQS_LSIO_QSPI0A_DQS 0x06000021 + IMX8QM_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B 0x06000021 + IMX8QM_QSPI0A_SS1_B_LSIO_QSPI0A_SS1_B 0x06000021 + IMX8QM_QSPI0A_SCLK_LSIO_QSPI0A_SCLK 0x06000021 + IMX8QM_QSPI0B_SCLK_LSIO_QSPI0B_SCLK 0x06000021 + IMX8QM_QSPI0B_DATA0_LSIO_QSPI0B_DATA0 0x06000021 + IMX8QM_QSPI0B_DATA1_LSIO_QSPI0B_DATA1 0x06000021 + IMX8QM_QSPI0B_DATA2_LSIO_QSPI0B_DATA2 0x06000021 + IMX8QM_QSPI0B_DATA3_LSIO_QSPI0B_DATA3 0x06000021 + IMX8QM_QSPI0B_DQS_LSIO_QSPI0B_DQS 0x06000021 + IMX8QM_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B 0x06000021 + IMX8QM_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B 0x06000021 >; }; @@ -1092,6 +1176,15 @@ IMX8QM_UART0_TX_DMA_UART0_TX 0x06000020 >; }; + pinctrl_lpuart1: lpuart1grp { + fsl,pins = < + IMX8QM_UART1_RX_DMA_UART1_RX 0x06000020 + IMX8QM_UART1_TX_DMA_UART1_TX 0x06000020 + IMX8QM_UART1_CTS_B_DMA_UART1_CTS_B 0x06000020 + IMX8QM_UART1_RTS_B_DMA_UART1_RTS_B 0x06000020 + >; + }; + pinctrl_lpuart2: lpuart2grp { fsl,pins = < IMX8QM_UART0_RTS_B_DMA_UART2_RX 0x06000020 @@ -1201,6 +1294,12 @@ IMX8QM_USB_SS3_TC3_LSIO_GPIO4_IO06 0x60 >; }; + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + IMX8QM_USB_SS3_TC0_LSIO_GPIO4_IO03 0x06000021 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 @@ -1228,4 +1327,12 @@ IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021 IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021 >; }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + IMX8QM_USDHC1_DATA6_LSIO_GPIO5_IO21 0x00000021 + IMX8QM_USDHC1_DATA7_LSIO_GPIO5_IO22 0x00000021 + IMX8QM_USDHC1_RESET_B_LSIO_GPIO4_IO07 0x00000021 + >; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi index c9b55f02497ab6..7c5386d4ab2b7a 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi @@ -327,7 +327,8 @@ &edma0 { , /* sai2 */ , /* sai3 */ , /* sai4 */ - ; /* sai5 */ + , /* sai5 */ + ; power-domains = <&pd IMX_SC_R_DMA_2_CH0>, <&pd IMX_SC_R_DMA_2_CH1>, <&pd IMX_SC_R_DMA_2_CH2>, @@ -365,7 +366,8 @@ &edma1 { , /* no used */ , /* sai6 */ , - ; /* sai7 */ + , /* sai7 */ + ; power-domains = <&pd IMX_SC_R_DMA_3_CH0>, <&pd IMX_SC_R_DMA_3_CH1>, <&pd IMX_SC_R_DMA_3_CH2>, diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi index d4856b8590e0c5..974e193f8dcb90 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi @@ -99,7 +99,8 @@ &edma2 { , , , - ; + , + ; power-domains = <&pd IMX_SC_R_DMA_0_CH0>, <&pd IMX_SC_R_DMA_0_CH1>, <&pd IMX_SC_R_DMA_0_CH2>, @@ -171,25 +172,25 @@ &flexcan3 { &lpuart0 { compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; - dmas = <&edma2 13 0 0>, <&edma2 12 0 1>; + dmas = <&edma2 12 0 FSL_EDMA_RX>, <&edma2 13 0 0>; dma-names = "rx","tx"; }; &lpuart1 { compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; - dmas = <&edma2 15 0 0>, <&edma2 14 0 1>; + dmas = <&edma2 14 0 FSL_EDMA_RX>, <&edma2 15 0 0>; dma-names = "rx","tx"; }; &lpuart2 { compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; - dmas = <&edma2 17 0 0>, <&edma2 16 0 1>; + dmas = <&edma2 16 0 FSL_EDMA_RX>, <&edma2 17 0 0>; dma-names = "rx","tx"; }; &lpuart3 { compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; - dmas = <&edma2 19 0 0>, <&edma2 18 0 1>; + dmas = <&edma2 18 0 FSL_EDMA_RX>, <&edma2 19 0 0>; dma-names = "rx","tx"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi index 5206ca82eaf642..cb66853b1cd3f3 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi @@ -369,7 +369,7 @@ watchdog { }; }; - thermal-zones { + thermal_zones: thermal-zones { cpu0-thermal { polling-delay-passive = <250>; polling-delay = <2000>; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts index 7b033744554105..523f48896b6b8e 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts @@ -150,6 +150,13 @@ reg_2v8: regulator-2v8 { regulator-max-microvolt = <2800000>; }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_pcieb: regulator-pcie { compatible = "regulator-fixed"; regulator-max-microvolt = <3300000>; @@ -212,6 +219,15 @@ reg_can_stby: regulator-can-stby { vin-supply = <®_can_en>; }; + reg_fec2_supply: regulator-fec2_nvcc { + compatible = "regulator-fixed"; + regulator-name = "fec2_nvcc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&max7322 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_usb_otg1_vbus: regulator-usbotg1-vbus { compatible = "regulator-fixed"; regulator-max-microvolt = <5000000>; @@ -397,6 +413,8 @@ &fec1 { pinctrl-0 = <&pinctrl_fec1>; phy-mode = "rgmii-id"; phy-handle = <ðphy0>; + nvmem-cells = <&fec_mac0>; + nvmem-cell-names = "mac-address"; fsl,magic-packet; status = "okay"; @@ -408,9 +426,26 @@ ethphy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; }; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; }; }; +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec2>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy1>; + phy-supply = <®_fec2_supply>; + fsl,magic-packet; + nvmem-cells = <&fec_mac1>; + nvmem-cell-names = "mac-address"; + status = "disabled"; +}; + &i2c1 { #address-cells = <1>; #size-cells = <0>; @@ -453,6 +488,8 @@ i2c@2 { pressure-sensor@60 { compatible = "fsl,mpl3115"; reg = <0x60>; + vdd-supply = <®_3v3>; + vddio-supply = <®_3v3>; }; }; @@ -586,6 +623,20 @@ &flexcan2 { status = "okay"; }; +&flexspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi0>; + status = "okay"; + + flash0: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <133000000>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + }; +}; + &jpegdec { status = "okay"; }; @@ -600,6 +651,16 @@ &lpuart0 { status = "okay"; }; +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart1>; + status = "okay"; + + bluetooth { + compatible = "nxp,88w8987-bt"; + }; +}; + &lpuart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpuart2>; @@ -631,6 +692,8 @@ &pcie0 { pinctrl-names = "default"; reset-gpios = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>; vpcie-supply = <®_pcieb>; + vpcie3v3aux-supply = <®_pcieb>; + supports-clkreq; status = "okay"; }; @@ -729,9 +792,11 @@ map0 { &usdhc1 { assigned-clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>; - assigned-clock-rates = <200000000>; - pinctrl-names = "default"; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1>; + pinctrl-2 = <&pinctrl_usdhc1>; bus-width = <8>; no-sd; no-sdio; @@ -742,8 +807,10 @@ &usdhc1 { &usdhc2 { assigned-clocks = <&clk IMX_SC_R_SDHC_1 IMX_SC_PM_CLK_PER>; assigned-clock-rates = <200000000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; bus-width = <4>; vmmc-supply = <®_usdhc2_vmmc>; cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>; @@ -807,8 +874,8 @@ &iomuxc { pinctrl_cm40_i2c: cm40i2cgrp { fsl,pins = < - IMX8QXP_ADC_IN1_M40_I2C0_SDA 0x0600004c - IMX8QXP_ADC_IN0_M40_I2C0_SCL 0x0600004c + IMX8QXP_ADC_IN1_M40_I2C0_SDA 0x0600004c + IMX8QXP_ADC_IN0_M40_I2C0_SCL 0x0600004c >; }; @@ -821,16 +888,16 @@ IMX8QXP_ADC_IN0_LSIO_GPIO1_IO10 0xc600004c pinctrl_esai0: esai0grp { fsl,pins = < - IMX8QXP_ESAI0_FSR_ADMA_ESAI0_FSR 0xc6000040 - IMX8QXP_ESAI0_FST_ADMA_ESAI0_FST 0xc6000040 - IMX8QXP_ESAI0_SCKR_ADMA_ESAI0_SCKR 0xc6000040 - IMX8QXP_ESAI0_SCKT_ADMA_ESAI0_SCKT 0xc6000040 - IMX8QXP_ESAI0_TX0_ADMA_ESAI0_TX0 0xc6000040 - IMX8QXP_ESAI0_TX1_ADMA_ESAI0_TX1 0xc6000040 - IMX8QXP_ESAI0_TX2_RX3_ADMA_ESAI0_TX2_RX3 0xc6000040 - IMX8QXP_ESAI0_TX3_RX2_ADMA_ESAI0_TX3_RX2 0xc6000040 - IMX8QXP_ESAI0_TX4_RX1_ADMA_ESAI0_TX4_RX1 0xc6000040 - IMX8QXP_ESAI0_TX5_RX0_ADMA_ESAI0_TX5_RX0 0xc6000040 + IMX8QXP_ESAI0_FSR_ADMA_ESAI0_FSR 0xc6000040 + IMX8QXP_ESAI0_FST_ADMA_ESAI0_FST 0xc6000040 + IMX8QXP_ESAI0_SCKR_ADMA_ESAI0_SCKR 0xc6000040 + IMX8QXP_ESAI0_SCKT_ADMA_ESAI0_SCKT 0xc6000040 + IMX8QXP_ESAI0_TX0_ADMA_ESAI0_TX0 0xc6000040 + IMX8QXP_ESAI0_TX1_ADMA_ESAI0_TX1 0xc6000040 + IMX8QXP_ESAI0_TX2_RX3_ADMA_ESAI0_TX2_RX3 0xc6000040 + IMX8QXP_ESAI0_TX3_RX2_ADMA_ESAI0_TX3_RX2 0xc6000040 + IMX8QXP_ESAI0_TX4_RX1_ADMA_ESAI0_TX4_RX1 0xc6000040 + IMX8QXP_ESAI0_TX5_RX0_ADMA_ESAI0_TX5_RX0 0xc6000040 >; }; @@ -853,6 +920,23 @@ IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020 >; }; + pinctrl_fec2: fec2grp { + fsl,pins = < + IMX8QXP_ESAI0_SCKR_CONN_ENET1_RGMII_TX_CTL 0x00000060 + IMX8QXP_ESAI0_FSR_CONN_ENET1_RGMII_TXC 0x00000060 + IMX8QXP_ESAI0_TX4_RX1_CONN_ENET1_RGMII_TXD0 0x00000060 + IMX8QXP_ESAI0_TX5_RX0_CONN_ENET1_RGMII_TXD1 0x00000060 + IMX8QXP_ESAI0_FST_CONN_ENET1_RGMII_TXD2 0x00000060 + IMX8QXP_ESAI0_SCKT_CONN_ENET1_RGMII_TXD3 0x00000060 + IMX8QXP_ESAI0_TX0_CONN_ENET1_RGMII_RXC 0x00000060 + IMX8QXP_SPDIF0_TX_CONN_ENET1_RGMII_RX_CTL 0x00000060 + IMX8QXP_SPDIF0_RX_CONN_ENET1_RGMII_RXD0 0x00000060 + IMX8QXP_ESAI0_TX3_RX2_CONN_ENET1_RGMII_RXD1 0x00000060 + IMX8QXP_ESAI0_TX2_RX3_CONN_ENET1_RGMII_RXD2 0x00000060 + IMX8QXP_ESAI0_TX1_CONN_ENET1_RGMII_RXD3 0x00000060 + >; + }; + pinctrl_flexcan1: flexcan0grp { fsl,pins = < IMX8QXP_FLEXCAN0_TX_ADMA_FLEXCAN0_TX 0x21 @@ -874,6 +958,27 @@ IMX8QXP_MIPI_CSI0_I2C0_SDA_MIPI_CSI0_I2C0_SDA 0xc2000020 >; }; + pinctrl_flexspi0: flexspi0grp { + fsl,pins = < + IMX8QXP_QSPI0A_DATA0_LSIO_QSPI0A_DATA0 0x06000021 + IMX8QXP_QSPI0A_DATA1_LSIO_QSPI0A_DATA1 0x06000021 + IMX8QXP_QSPI0A_DATA2_LSIO_QSPI0A_DATA2 0x06000021 + IMX8QXP_QSPI0A_DATA3_LSIO_QSPI0A_DATA3 0x06000021 + IMX8QXP_QSPI0A_DQS_LSIO_QSPI0A_DQS 0x06000021 + IMX8QXP_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B 0x06000021 + IMX8QXP_QSPI0A_SS1_B_LSIO_QSPI0A_SS1_B 0x06000021 + IMX8QXP_QSPI0A_SCLK_LSIO_QSPI0A_SCLK 0x06000021 + IMX8QXP_QSPI0B_SCLK_LSIO_QSPI0B_SCLK 0x06000021 + IMX8QXP_QSPI0B_DATA0_LSIO_QSPI0B_DATA0 0x06000021 + IMX8QXP_QSPI0B_DATA1_LSIO_QSPI0B_DATA1 0x06000021 + IMX8QXP_QSPI0B_DATA2_LSIO_QSPI0B_DATA2 0x06000021 + IMX8QXP_QSPI0B_DATA3_LSIO_QSPI0B_DATA3 0x06000021 + IMX8QXP_QSPI0B_DQS_LSIO_QSPI0B_DQS 0x06000021 + IMX8QXP_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B 0x06000021 + IMX8QXP_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B 0x06000021 + >; + }; + pinctrl_ioexp_rst: ioexprstgrp { fsl,pins = < IMX8QXP_SPI2_SDO_LSIO_GPIO1_IO01 0x06000021 @@ -900,17 +1005,26 @@ IMX8QXP_UART0_TX_ADMA_UART0_TX 0x06000020 >; }; + pinctrl_lpuart1: lpuart1grp { + fsl,pins = < + IMX8QXP_UART1_TX_ADMA_UART1_TX 0x06000020 + IMX8QXP_UART1_RX_ADMA_UART1_RX 0x06000020 + IMX8QXP_UART1_RTS_B_ADMA_UART1_RTS_B 0x06000020 + IMX8QXP_UART1_CTS_B_ADMA_UART1_CTS_B 0x06000020 + >; + }; + pinctrl_lpuart2: lpuart2grp { fsl,pins = < - IMX8QXP_UART2_TX_ADMA_UART2_TX 0x06000020 - IMX8QXP_UART2_RX_ADMA_UART2_RX 0x06000020 + IMX8QXP_UART2_TX_ADMA_UART2_TX 0x06000020 + IMX8QXP_UART2_RX_ADMA_UART2_RX 0x06000020 >; }; pinctrl_lpuart3: lpuart3grp { fsl,pins = < - IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX 0x06000020 - IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX 0x06000020 + IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX 0x06000020 + IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX 0x06000020 >; }; @@ -932,13 +1046,13 @@ IMX8QXP_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO02 0x04000021 pinctrl_typec: typecgrp { fsl,pins = < - IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03 0x06000021 + IMX8QXP_SPI2_SCK_LSIO_GPIO1_IO03 0x06000021 >; }; pinctrl_typec_mux: typecmuxgrp { fsl,pins = < - IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09 0x60 + IMX8QXP_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09 0x60 >; }; @@ -953,11 +1067,11 @@ IMX8QXP_SAI0_TXFS_ADMA_SAI0_TXFS 0x06000040 pinctrl_sai1: sai1grp { fsl,pins = < - IMX8QXP_SAI1_RXD_ADMA_SAI1_RXD 0x06000040 - IMX8QXP_SAI1_RXC_ADMA_SAI1_TXC 0x06000040 - IMX8QXP_SAI1_RXFS_ADMA_SAI1_TXFS 0x06000040 - IMX8QXP_SPI0_CS1_ADMA_SAI1_TXD 0x06000060 - IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00 0x06000040 + IMX8QXP_SAI1_RXD_ADMA_SAI1_RXD 0x06000040 + IMX8QXP_SAI1_RXC_ADMA_SAI1_TXC 0x06000040 + IMX8QXP_SAI1_RXFS_ADMA_SAI1_TXFS 0x06000040 + IMX8QXP_SPI0_CS1_ADMA_SAI1_TXD 0x06000060 + IMX8QXP_SPI2_CS0_LSIO_GPIO1_IO00 0x06000040 >; }; @@ -977,6 +1091,14 @@ IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 >; }; + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + IMX8QXP_USDHC1_RESET_B_LSIO_GPIO4_IO19 0x00000021 + IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21 0x00000021 + IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22 0x00000021 + >; + }; + pinctrl_usdhc2: usdhc2grp { fsl,pins = < IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index 95edab058276bc..7c4a50e0ec9e9a 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -234,11 +234,20 @@ ocotp: ocotp { compatible = "fsl,imx8qxp-scu-ocotp"; #address-cells = <1>; #size-cells = <1>; + + fec_mac0: mac@2c4 { + reg = <0x2c4 6>; + }; + + fec_mac1: mac@2c6 { + reg = <0x2c6 6>; + }; }; scu_key: keys { compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key"; linux,keycodes = ; + wakeup-source; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/freescale/imx91-phyboard-segin.dts b/arch/arm64/boot/dts/freescale/imx91-phyboard-segin.dts new file mode 100644 index 00000000000000..7b18a58024f5c6 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx91-phyboard-segin.dts @@ -0,0 +1,345 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + * Author: Christoph Stoidner + * + * Product homepage: + * phyBOARD-Segin carrier board is reused for the i.MX91 design. + * https://www.phytec.eu/en/produkte/single-board-computer/phyboard-segin-imx6ul/ + */ +/dts-v1/; + +#include "imx91-phycore-som.dtsi" + +/{ + model = "PHYTEC phyBOARD-Segin-i.MX91"; + compatible = "phytec,imx91-phyboard-segin", "phytec,imx91-phycore-som", + "fsl,imx91"; + + aliases { + ethernet1 = &eqos; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + i2c0 = &lpi2c1; + i2c1 = &lpi2c2; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + rtc0 = &i2c_rtc; + rtc1 = &bbnsm_rtc; + serial0 = &lpuart1; + }; + + chosen { + stdout-path = &lpuart1; + }; + + flexcan1_tc: can-phy0 { + /* TI SN65HVD234D CAN-CC 1MBit/s */ + compatible = "ti,tcan1043"; + #phy-cells = <0>; + max-bitrate = <1000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1_tc>; + enable-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + }; + + reg_sound_1v8: regulator-sound-1v8 { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "VCC1V8_AUDIO"; + }; + + reg_sound_3v3: regulator-sound-3v3 { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VCC3V3_ANALOG"; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "USB_OTG1_VBUS"; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-always-on; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + regulator-name = "USB_OTG2_VBUS"; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-always-on; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "VCC_SD"; + }; + + sound: sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "phyBOARD-Segin-TLV320AIC3007"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,widgets = + "Line", "Line In", + "Line", "Line Out", + "Speaker", "Speaker"; + simple-audio-card,routing = + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "Speaker", "SPOP", + "Speaker", "SPOM", + "LINE1L", "Line In", + "LINE1R", "Line In"; + + simple-audio-card,cpu { + sound-dai = <&sai1>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&audio_codec>; + clocks = <&clk IMX93_CLK_SAI1>; + }; + }; +}; + +/* Ethernet */ +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rmii"; + phy-handle = <ðphy2>; + assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>, + <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>; + assigned-clock-rates = <100000000>, <50000000>; + status = "okay"; +}; + +&mdio { + ethphy2: ethernet-phy@2 { + compatible = "ethernet-phy-id0022.1561"; + reg = <2>; + clocks = <&clk IMX91_CLK_ENET2_REGULAR>; + clock-names = "rmii-ref"; + micrel,led-mode = <1>; + }; +}; + +/* CAN */ +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + phys = <&flexcan1_tc>; + status = "okay"; +}; + +/* I2C2 */ +&lpi2c2 { + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c2>; + pinctrl-1 = <&pinctrl_lpi2c2_gpio>; + scl-gpios = <&gpio1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + /* Codec */ + audio_codec: audio-codec@18 { + compatible = "ti,tlv320aic3007"; + reg = <0x18>; + #sound-dai-cells = <0>; + AVDD-supply = <®_sound_3v3>; + IOVDD-supply = <®_sound_3v3>; + DRVDD-supply = <®_sound_3v3>; + DVDD-supply = <®_sound_1v8>; + }; + + /* RTC */ + i2c_rtc: rtc@68 { + compatible = "microcrystal,rv4162"; + reg = <0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + interrupt-parent = <&gpio4>; + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +/* Console */ +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* Audio */ +&sai1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&clk IMX93_CLK_SAI1>; + assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>; + assigned-clock-rates = <19200000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +/* USB */ +&usbphynop1 { + vbus-supply = <®_usb_otg1_vbus>; +}; + +&usbphynop2 { + vbus-supply = <®_usb_otg2_vbus>; +}; + +&usbotg1 { + disable-over-current; + dr_mode = "otg"; + status = "okay"; +}; + +&usbotg2 { + disable-over-current; + dr_mode = "host"; + status = "okay"; +}; + +/* SD-Card */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2_default>, <&pinctrl_usdhc2_cd>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>; + bus-width = <4>; + cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + disable-wp; + no-mmc; + no-sdio; + vmmc-supply = <®_usdhc2_vmmc>; + status = "okay"; +}; + +&iomuxc { + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX91_PAD_ENET1_TD2__ENET_QOS_CLOCK_GENERATE_CLK 0x4000050e + MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e + MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e + MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x50e + MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1 0x50e + MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e + MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x50e + MX91_PAD_ENET1_RXC__ENET_QOS_RX_ER 0x57e + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX91_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e + MX91_PAD_PDM_CLK__CAN1_TX 0x139e + >; + }; + + pinctrl_flexcan1_tc: flexcan1tcgrp { + fsl,pins = < + MX91_PAD_ENET2_TD3__GPIO4_IO16 0x31e + >; + }; + + pinctrl_lpi2c2: lpi2c2grp { + fsl,pins = < + MX91_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e + MX91_PAD_I2C2_SDA__LPI2C2_SDA 0x40000b9e + >; + }; + + pinctrl_lpi2c2_gpio: lpi2c2gpiogrp { + fsl,pins = < + MX91_PAD_I2C2_SCL__GPIO1_IO2 0x31e + MX91_PAD_I2C2_SDA__GPIO1_IO3 0x31e + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX91_PAD_SD2_RESET_B__GPIO3_IO7 0x31e + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX91_PAD_ENET2_RD2__GPIO4_IO26 0x31e + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + MX91_PAD_UART2_RXD__SAI1_MCLK 0x1202 + MX91_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x1202 + MX91_PAD_SAI1_TXC__SAI1_TX_BCLK 0x1202 + MX91_PAD_SAI1_TXD0__SAI1_TX_DATA0 0x1402 + MX91_PAD_SAI1_RXD0__SAI1_RX_DATA0 0x1402 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX91_PAD_UART1_RXD__LPUART1_RX 0x31e + MX91_PAD_UART1_TXD__LPUART1_TX 0x30e + >; + }; + + pinctrl_usdhc2_cd: usdhc2cdgrp { + fsl,pins = < + MX91_PAD_SD2_CD_B__GPIO3_IO0 0x31e + >; + }; + + pinctrl_usdhc2_default: usdhc2grp { + fsl,pins = < + MX91_PAD_SD2_CLK__USDHC2_CLK 0x158e + MX91_PAD_SD2_CMD__USDHC2_CMD 0x1382 + MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x1386 + MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x138e + MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x139e + MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x139e + MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX91_PAD_SD2_CLK__USDHC2_CLK 0x159e + MX91_PAD_SD2_CMD__USDHC2_CMD 0x139e + MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x138e + MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x138e + MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x139e + MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x139e + MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX91_PAD_SD2_CLK__USDHC2_CLK 0x158e + MX91_PAD_SD2_CMD__USDHC2_CMD 0x138e + MX91_PAD_SD2_DATA0__USDHC2_DATA0 0x139e + MX91_PAD_SD2_DATA1__USDHC2_DATA1 0x139e + MX91_PAD_SD2_DATA2__USDHC2_DATA2 0x139e + MX91_PAD_SD2_DATA3__USDHC2_DATA3 0x139e + MX91_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx91-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx91-phycore-som.dtsi new file mode 100644 index 00000000000000..29a428a052b076 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx91-phycore-som.dtsi @@ -0,0 +1,304 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + * Author: Christoph Stoidner + * + * Product homepage: + * https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/ + */ + +#include + +#include "imx91.dtsi" + +/ { + model = "PHYTEC phyCORE-i.MX91"; + compatible = "phytec,imx91-phycore-som", "fsl,imx91"; + + aliases { + ethernet0 = &fec; + }; + + reserved-memory { + ranges; + #address-cells = <2>; + #size-cells = <2>; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + alloc-ranges = <0 0x80000000 0 0x40000000>; + size = <0 0x10000000>; + linux,cma-default; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-0 { + color = ; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_vdda_1v8: regulator-vdda-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDA_1V8"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + vin-supply = <&buck5>; + }; +}; + +/* ADC */ +&adc1 { + vref-supply = <®_vdda_1v8>; +}; + +/* Ethernet */ +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + + assigned-clocks = <&clk IMX91_CLK_ENET_TIMER>, + <&clk IMX91_CLK_ENET2_REGULAR>; + assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>, + <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>; + assigned-clock-rates = <100000000>, <50000000>; + status = "okay"; + + mdio: mdio { + clock-frequency = <5000000>; + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + reset-gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>; + reset-assert-us = <30>; + }; + }; +}; + +/* I2C3 */ +&lpi2c3 { + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c3>; + pinctrl-1 = <&pinctrl_lpi2c3_gpio>; + scl-gpios = <&gpio2 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio2 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + pmic@25 { + compatible = "nxp,pca9451a"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio4>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + + regulators { + buck1: BUCK1 { + regulator-name = "VDD_SOC"; + regulator-max-microvolt = <950000>; + regulator-min-microvolt = <610000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck2: BUCK2 { + regulator-name = "VDDQ_0V6"; + regulator-max-microvolt = <600000>; + regulator-min-microvolt = <600000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4: BUCK4 { + regulator-name = "VDD_3V3_BUCK"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: BUCK5 { + regulator-name = "VDD_1V8"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { + regulator-name = "VDD_1V1"; + regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-name = "PMIC_SNVS_1V8"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: LDO4 { + regulator-name = "VDD_0V8"; + regulator-max-microvolt = <800000>; + regulator-min-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: LDO5 { + regulator-name = "NVCC_SD2"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + /* EEPROM */ + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + vcc-supply = <&buck4>; + }; +}; + +/* eMMC */ +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + non-removable; + no-1-8-v; + status = "okay"; +}; + +/* Watchdog */ +&wdog3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec: fecgrp { + fsl,pins = < + MX91_PAD_ENET2_MDC__ENET2_MDC 0x50e + MX91_PAD_ENET2_MDIO__ENET2_MDIO 0x502 + /* the three pins below are connected to PHYs straps, + * that is what the pull-up/down setting is for. + */ + MX91_PAD_ENET2_RD0__ENET2_RGMII_RD0 0x37e + MX91_PAD_ENET2_RD1__ENET2_RGMII_RD1 0x37e + MX91_PAD_ENET2_RX_CTL__ENET2_RGMII_RX_CTL 0x57e + MX91_PAD_ENET2_TD0__ENET2_RGMII_TD0 0x50e + MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1 0x50e + MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL 0x50e + MX91_PAD_ENET2_TD2__ENET2_TX_CLK2 0x4000050e + MX91_PAD_ENET2_RXC__GPIO4_IO23 0x51e + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX91_PAD_I2C1_SDA__GPIO1_IO1 0x11e + >; + }; + + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = < + MX91_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e + MX91_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e + >; + }; + + pinctrl_lpi2c3_gpio: lpi2c3gpiogrp { + fsl,pins = < + MX91_PAD_GPIO_IO28__GPIO2_IO28 0x31e + MX91_PAD_GPIO_IO29__GPIO2_IO29 0x31e + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX91_PAD_ENET2_RD3__GPIO4_IO27 0x31e + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX91_PAD_SD1_CLK__USDHC1_CLK 0x179e + MX91_PAD_SD1_CMD__USDHC1_CMD 0x1386 + MX91_PAD_SD1_DATA0__USDHC1_DATA0 0x138e + MX91_PAD_SD1_DATA1__USDHC1_DATA1 0x1386 + MX91_PAD_SD1_DATA2__USDHC1_DATA2 0x138e + MX91_PAD_SD1_DATA3__USDHC1_DATA3 0x1386 + MX91_PAD_SD1_DATA4__USDHC1_DATA4 0x1386 + MX91_PAD_SD1_DATA5__USDHC1_DATA5 0x1386 + MX91_PAD_SD1_DATA6__USDHC1_DATA6 0x1386 + MX91_PAD_SD1_DATA7__USDHC1_DATA7 0x1386 + MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x179e + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX91_PAD_SD1_CLK__USDHC1_CLK 0x17be + MX91_PAD_SD1_CMD__USDHC1_CMD 0x139e + MX91_PAD_SD1_DATA0__USDHC1_DATA0 0x138e + MX91_PAD_SD1_DATA1__USDHC1_DATA1 0x139e + MX91_PAD_SD1_DATA2__USDHC1_DATA2 0x13be + MX91_PAD_SD1_DATA3__USDHC1_DATA3 0x139e + MX91_PAD_SD1_DATA4__USDHC1_DATA4 0x139e + MX91_PAD_SD1_DATA5__USDHC1_DATA5 0x139e + MX91_PAD_SD1_DATA6__USDHC1_DATA6 0x139e + MX91_PAD_SD1_DATA7__USDHC1_DATA7 0x139e + MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x179e + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX91_PAD_SD1_CLK__USDHC1_CLK 0x17be + MX91_PAD_SD1_CMD__USDHC1_CMD 0x139e + MX91_PAD_SD1_DATA0__USDHC1_DATA0 0x139e + MX91_PAD_SD1_DATA1__USDHC1_DATA1 0x13be + MX91_PAD_SD1_DATA2__USDHC1_DATA2 0x13be + MX91_PAD_SD1_DATA3__USDHC1_DATA3 0x13be + MX91_PAD_SD1_DATA4__USDHC1_DATA4 0x13be + MX91_PAD_SD1_DATA5__USDHC1_DATA5 0x13be + MX91_PAD_SD1_DATA6__USDHC1_DATA6 0x13be + MX91_PAD_SD1_DATA7__USDHC1_DATA7 0x13be + MX91_PAD_SD1_STROBE__USDHC1_STROBE 0x179e + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX91_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x31e + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi b/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi index 52da571f26c4e8..7958cef353766a 100644 --- a/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi +++ b/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi @@ -706,7 +706,7 @@ flexcan2: can@425b0000 { }; flexspi1: spi@425e0000 { - compatible = "nxp,imx8mm-fspi"; + compatible = "nxp,imx93-fspi", "nxp,imx8mm-fspi"; reg = <0x425e0000 0x10000>, <0x28000000 0x10000000>; reg-names = "fspi_base", "fspi_mmap"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-jtag.dtso b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-jtag.dtso new file mode 100644 index 00000000000000..89f93dca3208bc --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-jtag.dtso @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + * Author: Primoz Fiser + */ + +#include "imx93-pinfunc.h" + +/dts-v1/; +/plugin/; + +/* + * NOTE: Bind pinctrl_jtag to gpio2 so that the pinctrl settings are applied. + * JTAG itself has no dedicated driver, so without attaching it to an active + * device node (like gpio2), the pinmux configuration would not take effect. + */ +&gpio2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_jtag>; +}; + +&iomuxc { + pinctrl_jtag: jtaggrp { + fsl,pins = < + MX93_PAD_GPIO_IO24__JTAG_MUX_TDO 0x31e + MX93_PAD_GPIO_IO25__JTAG_MUX_TCK 0x31e + MX93_PAD_GPIO_IO26__JTAG_MUX_TDI 0x31e + MX93_PAD_GPIO_IO27__JTAG_MUX_TMS 0x31e + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-pwm-fan.dtso b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-pwm-fan.dtso new file mode 100644 index 00000000000000..d1adf04d56d9b8 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash-pwm-fan.dtso @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + * Author: Primoz Fiser + */ + +#include +#include "imx93-pinfunc.h" + +/dts-v1/; +/plugin/; + +&{/} { + fan0: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fan>; + cooling-levels = <1 90 150 200 255>; + pwms = <&tpm6 1 40000 PWM_POLARITY_INVERTED>; + }; + + thermal-zones { + cpu-thermal { + trips { + cpu_low: cpu-low { + hysteresis = <3000>; + temperature = <50000>; + type = "active"; + }; + + cpu_med: cpu-med { + hysteresis = <3000>; + temperature = <58000>; + type = "active"; + }; + + cpu_high: cpu-high { + hysteresis = <3000>; + temperature = <65000>; + type = "active"; + }; + }; + + cooling-maps { + map1 { + cooling-device = <&fan0 1 1>; + trip = <&cpu_low>; + }; + + map2 { + cooling-device = <&fan0 2 2>; + trip = <&cpu_med>; + }; + + map3 { + cooling-device = <&fan0 4 4>; + trip = <&cpu_high>; + }; + }; + }; + }; +}; + +&tpm6 { + status = "okay"; +}; + +&iomuxc { + pinctrl_fan: fangrp { + fsl,pins = < + MX93_PAD_GPIO_IO23__TPM6_CH1 0x31e + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts index 5599e296919f4d..9e875e082ee87b 100644 --- a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts +++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts @@ -71,6 +71,22 @@ iio-hwmon { io-channels = <&curr_sens 0>; }; + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "USB1_VBUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_usb2_vbus: regulator-usb2-vbus { + compatible = "regulator-fixed"; + regulator-name = "USB2_VBUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; @@ -187,6 +203,14 @@ &lpuart7 { }; /* USB */ +&usbphynop1 { + vbus-supply = <®_usb1_vbus>; +}; + +&usbphynop2 { + vbus-supply = <®_usb2_vbus>; +}; + &usbotg1 { disable-over-current; dr_mode = "otg"; diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts index 802d96b19e4ccc..ac64abacc4a277 100644 --- a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts +++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts @@ -59,6 +59,22 @@ reg_sound_3v3: regulator-sound-3v3 { regulator-name = "VCC3V3_ANALOG"; }; + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "USB_OTG1_VBUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + regulator-name = "USB_OTG2_VBUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; enable-active-high; @@ -177,6 +193,14 @@ &sai1 { }; /* USB */ +&usbphynop1 { + vbus-supply = <®_usb_otg1_vbus>; +}; + +&usbphynop2 { + vbus-supply = <®_usb_otg2_vbus>; +}; + &usbotg1 { disable-over-current; dr_mode = "otg"; diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi b/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi index 82914ca148d3aa..3a23e2eb9febe8 100644 --- a/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi @@ -67,6 +67,7 @@ flash0: flash@0 { spi-max-frequency = <62000000>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; + vcc-supply = <&buck5>; partitions { compatible = "fixed-partitions"; diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi index a5f09487d80366..2dc8b18ae91e5c 100644 --- a/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93-var-som.dtsi @@ -12,7 +12,35 @@ /{ model = "Variscite VAR-SOM-MX93 module"; compatible = "variscite,var-som-mx93", "fsl,imx93"; - mmc_pwrseq: mmc-pwrseq { + sound { + compatible = "simple-audio-card"; + simple-audio-card,bitclock-master = <&codec_dai>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,name = "wm8904-audio"; + simple-audio-card,routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "IN1L", "Microphone Jack", + "IN1R", "Microphone Jack"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Line", "Line In Jack"; + simple-audio-card,mclk-fs = <256>; + + codec_dai: simple-audio-card,codec { + sound-dai = <&wm8904>; + }; + + simple-audio-card,cpu { + sound-dai = <&sai1>; + }; + }; + + usdhc3_pwrseq: mmc-pwrseq { compatible = "mmc-pwrseq-simple"; post-power-on-delay-ms = <100>; power-off-delay-us = <10000>; @@ -70,6 +98,175 @@ led@1 { }; }; +&lpi2c3 { + clock-frequency = <400000>; + pinctrl-names = "default", "sleep", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c3>; + pinctrl-1 = <&pinctrl_lpi2c3_gpio>; + pinctrl-2 = <&pinctrl_lpi2c3_gpio>; + scl-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; + status = "okay"; + + pmic@25 { + compatible = "nxp,pca9451a"; + reg = <0x25>; + + regulators { + buck1: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2237500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck2: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck4: BUCK4{ + regulator-name = "BUCK4"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: BUCK5{ + regulator-name = "BUCK5"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + wm8904: audio-codec@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + #sound-dai-cells = <0>; + clocks = <&clk IMX93_CLK_SAI1_GATE>; + clock-names = "mclk"; + AVDD-supply = <&buck5>; + CPVDD-supply = <&buck5>; + DBVDD-supply = <&buck4>; + DCVDD-supply = <&buck5>; + MICVDD-supply = <&buck5>; + wlf,drc-cfg-names = "default", "peaklimiter", "tradition", + "soft", "music"; + /* + * Config registers per name, respectively: + * KNEE_IP = 0, KNEE_OP = 0, HI_COMP = 1, LO_COMP = 1 + * KNEE_IP = -24, KNEE_OP = -6, HI_COMP = 1/4, LO_COMP = 1 + * KNEE_IP = -42, KNEE_OP = -3, HI_COMP = 0, LO_COMP = 1 + * KNEE_IP = -45, KNEE_OP = -9, HI_COMP = 1/8, LO_COMP = 1 + * KNEE_IP = -30, KNEE_OP = -10.5, HI_COMP = 1/4, LO_COMP = 1 + */ + wlf,drc-cfg-regs = /bits/ 16 <0x01af 0x3248 0x0000 0x0000>, + /bits/ 16 <0x04af 0x324b 0x0010 0x0408>, + /bits/ 16 <0x04af 0x324b 0x0028 0x0704>, + /bits/ 16 <0x04af 0x324b 0x0018 0x078c>, + /bits/ 16 <0x04af 0x324b 0x0010 0x050e>; + /* GPIO1 = DMIC_CLK, don't touch others */ + wlf,gpio-cfg = <0x0018>, <0xffff>, <0xffff>, <0xffff>; + }; +}; + +&lpspi8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi8>; + cs-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + status = "okay"; + + /* Resistive touch controller */ + ads7846: touchscreen@0 { + compatible = "ti,ads7846"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_restouch>; + interrupt-parent = <&gpio4>; + interrupts = <29 IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <1000000>; + pendown-gpio = <&gpio4 29 0>; + vcc-supply = <&buck5>; + ti,x-min = /bits/ 16 <125>; + ti,x-max = /bits/ 16 <4008>; + ti,y-min = /bits/ 16 <282>; + ti,y-max = /bits/ 16 <3864>; + ti,x-plate-ohms = /bits/ 16 <180>; + ti,pressure-max = /bits/ 16 <255>; + ti,debounce-max = /bits/ 16 <10>; + ti,debounce-tol = /bits/ 16 <3>; + ti,debounce-rep = /bits/ 16 <1>; + ti,settle-delay-usec = /bits/ 16 <150>; + ti,keep-vref-on; + wakeup-source; + }; +}; + +/* BT module */ +&lpuart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart5>, <&pinctrl_bluetooth>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "nxp,88w8987-bt"; + }; +}; + +&sai1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_sai1>; + pinctrl-1 = <&pinctrl_sai1_sleep>; + assigned-clocks = <&clk IMX93_CLK_SAI1>; + assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>; + assigned-clock-rates = <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + /* eMMC */ &usdhc1 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; @@ -81,7 +278,27 @@ &usdhc1 { status = "okay"; }; +/* WiFi */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_wlan>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_wlan>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_wlan>; + pinctrl-3 = <&pinctrl_usdhc3_sleep>, <&pinctrl_usdhc3_wlan>; + bus-width = <4>; + mmc-pwrseq = <&usdhc3_pwrseq>; + non-removable; + wakeup-source; + status = "okay"; +}; + &iomuxc { + pinctrl_bluetooth: bluetoothgrp { + fsl,pins = < + MX93_PAD_ENET2_MDIO__GPIO4_IO15 0x51e + >; + }; + pinctrl_eqos: eqosgrp { fsl,pins = < MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x57e @@ -108,6 +325,68 @@ MX93_PAD_UART2_TXD__GPIO1_IO07 0x51e >; }; + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = < + MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e + MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e + >; + }; + + pinctrl_lpi2c3_gpio: lpi2c3-gpiogrp { + fsl,pins = < + MX93_PAD_GPIO_IO28__GPIO2_IO28 0x40000b9e + MX93_PAD_GPIO_IO29__GPIO2_IO29 0x40000b9e + >; + }; + + pinctrl_lpspi8: lpspi8grp { + fsl,pins = < + MX93_PAD_GPIO_IO12__GPIO2_IO12 0x31e + MX93_PAD_GPIO_IO13__LPSPI8_SIN 0x31e + MX93_PAD_GPIO_IO14__LPSPI8_SOUT 0x31e + MX93_PAD_GPIO_IO15__LPSPI8_SCK 0x31e + >; + }; + + pinctrl_lpuart5: lpuart5grp { + fsl,pins = < + MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x31e + MX93_PAD_DAP_TDI__LPUART5_RX 0x31e + MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x31e + MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x31e + >; + }; + + pinctrl_restouch: restouchgrp { + fsl,pins = < + MX93_PAD_CCM_CLKO4__GPIO4_IO29 0x31e + >; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = < + MX93_PAD_SAI1_TXC__SAI1_TX_BCLK 0x31e + MX93_PAD_SAI1_TXFS__SAI1_TX_SYNC 0x31e + MX93_PAD_SAI1_TXD0__SAI1_TX_DATA00 0x31e + MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00 0x31e + MX93_PAD_I2C2_SDA__SAI1_RX_BCLK 0x31e + MX93_PAD_I2C2_SCL__SAI1_RX_SYNC 0x31e + MX93_PAD_UART2_RXD__SAI1_MCLK 0x31e + >; + }; + + pinctrl_sai1_sleep: sai1-sleepgrp { + fsl,pins = < + MX93_PAD_SAI1_TXC__GPIO1_IO12 0x31e + MX93_PAD_SAI1_TXFS__GPIO1_IO11 0x31e + MX93_PAD_SAI1_TXD0__GPIO1_IO13 0x31e + MX93_PAD_SAI1_RXD0__GPIO1_IO14 0x31e + MX93_PAD_UART2_RXD__GPIO1_IO06 0x31e + MX93_PAD_I2C2_SDA__GPIO1_IO03 0x31e + MX93_PAD_I2C2_SCL__GPIO1_IO02 0x31e + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe @@ -123,4 +402,55 @@ MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe >; }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x1582 /* SDIO_B_CLK */ + MX93_PAD_SD3_CMD__USDHC3_CMD 0x40001382 /* SDIO_B_CMD */ + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x40001382 /* SDIO_B_D0 */ + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x40001382 /* SDIO_B_D1 */ + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x40001382 /* SDIO_B_D2 */ + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x40001382 /* SDIO_B_D3 */ + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x158e /* SDIO_B_CLK */ + MX93_PAD_SD3_CMD__USDHC3_CMD 0x4000138e /* SDIO_B_CMD */ + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x4000138e /* SDIO_B_D0 */ + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x4000138e /* SDIO_B_D1 */ + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x4000138e /* SDIO_B_D2 */ + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x4000138e /* SDIO_B_D3 */ + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX93_PAD_SD3_CLK__USDHC3_CLK 0x15fe /* SDIO_B_CLK */ + MX93_PAD_SD3_CMD__USDHC3_CMD 0x400013fe /* SDIO_B_CMD */ + MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x400013fe /* SDIO_B_D0 */ + MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x400013fe /* SDIO_B_D1 */ + MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x400013fe /* SDIO_B_D2 */ + MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x400013fe /* SDIO_B_D3 */ + >; + }; + + pinctrl_usdhc3_sleep: usdhc3-sleepgrp { + fsl,pins = < + MX93_PAD_SD3_CLK__GPIO3_IO20 0x400 + MX93_PAD_SD3_CMD__GPIO3_IO21 0x400 + MX93_PAD_SD3_DATA0__GPIO3_IO22 0x400 + MX93_PAD_SD3_DATA1__GPIO3_IO23 0x400 + MX93_PAD_SD3_DATA2__GPIO3_IO24 0x400 + MX93_PAD_SD3_DATA3__GPIO3_IO25 0x400 + >; + }; + + pinctrl_usdhc3_wlan: usdhc3-wlangrp { + fsl,pins = < + MX93_PAD_ENET2_MDC__GPIO4_IO14 0x51e /* WIFI_REG_ON */ + MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x51e /* WIFI_PWR_EN */ + >; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx94.dtsi b/arch/arm64/boot/dts/freescale/imx94.dtsi index d4a880496b0eea..73184f03f8a3e1 100644 --- a/arch/arm64/boot/dts/freescale/imx94.dtsi +++ b/arch/arm64/boot/dts/freescale/imx94.dtsi @@ -1190,5 +1190,11 @@ wdog3: watchdog@49220000 { status = "disabled"; }; }; + + ddr-pmu@4e090dc0 { + compatible = "fsl,imx94-ddr-pmu", "fsl,imx93-ddr-pmu"; + reg = <0x0 0x4e090dc0 0x0 0x200>; + interrupts = ; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts index 148243470dd4ab..c1e245ecea9c16 100644 --- a/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts @@ -61,6 +61,7 @@ chosen { fan0: pwm-fan { compatible = "pwm-fan"; + fan-supply = <®_vcc_12v>; #cooling-cells = <2>; cooling-levels = <64 128 192 255>; pwms = <&tpm6 0 4000000 PWM_POLARITY_INVERTED>; @@ -556,6 +557,8 @@ &pcie0 { pinctrl-names = "default"; reset-gpio = <&gpio5 13 GPIO_ACTIVE_LOW>; vpcie-supply = <®_m2_pwr>; + vpcie3v3aux-supply = <®_m2_pwr>; + supports-clkreq; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts index 9f968feccef67c..aaa0da55a22bc3 100644 --- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts @@ -542,6 +542,8 @@ &pcie0 { pinctrl-names = "default"; reset-gpio = <&i2c7_pcal6524 5 GPIO_ACTIVE_LOW>; vpcie-supply = <®_pcie0>; + vpcie3v3aux-supply = <®_pcie0>; + supports-clkreq; status = "okay"; }; @@ -557,6 +559,7 @@ &pcie1 { pinctrl-names = "default"; reset-gpio = <&i2c7_pcal6524 16 GPIO_ACTIVE_LOW>; vpcie-supply = <®_slot_pwr>; + vpcie3v3aux-supply = <®_slot_pwr>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-verdin-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-verdin-evk.dts new file mode 100644 index 00000000000000..2b0ff232f680dd --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx95-19x19-verdin-evk.dts @@ -0,0 +1,695 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2023 NXP + * Copyright 2025 Marek Vasut + */ + +/dts-v1/; + +#include +#include "imx95.dtsi" + +#define FALLING_EDGE 1 +#define RISING_EDGE 2 + +#define BRD_SM_CTRL_SD3_WAKE 0x8000 /* PCAL6408A-0 */ +#define BRD_SM_CTRL_PCIE1_WAKE 0x8001 /* PCAL6408A-4 */ +#define BRD_SM_CTRL_BT_WAKE 0x8002 /* PCAL6408A-5 */ +#define BRD_SM_CTRL_PCIE2_WAKE 0x8003 /* PCAL6408A-6 */ +#define BRD_SM_CTRL_BUTTON 0x8004 /* PCAL6408A-7 */ + +/ { + model = "i.MX 95 Verdin Evaluation Kit (EVK)"; + compatible = "toradex,verdin-imx95-19x19-evk", "fsl,imx95"; + + aliases { + ethernet0 = &enetc_port0; + ethernet1 = &enetc_port1; + ethernet2 = &enetc_port2; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + i2c0 = &lpi2c1; + i2c1 = &lpi2c2; + i2c2 = &lpi2c3; + i2c3 = &lpi2c4; + i2c4 = &lpi2c5; + i2c5 = &lpi2c6; + i2c6 = &lpi2c7; + i2c7 = &lpi2c8; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + serial0 = &lpuart1; + }; + + chosen { + stdout-path = &lpuart1; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0 0x80000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + linux_cma: linux,cma { + compatible = "shared-dma-pool"; + alloc-ranges = <0 0x80000000 0 0x7f000000>; + size = <0 0x3c000000>; + linux,cma-default; + reusable; + }; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "+V1.8_SW"; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "+V3.3_SW"; + }; + + reg_m2_pwr: regulator-m2-pwr { + compatible = "regulator-fixed"; + regulator-name = "M.2-power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 4 GPIO_ACTIVE_LOW>; + }; + + reg_pcie0: regulator-pcie { + compatible = "regulator-fixed"; + regulator-name = "PCIE_WLAN_EN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_m2_pwr>; + gpio = <&i2c7_pcal6524 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VDD_SD2_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + off-on-delay-us = <12000>; + }; + + usdhc3_pwrseq: usdhc3-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&i2c7_pcal6524 11 GPIO_ACTIVE_HIGH>; + }; + + sound-wm8904 { + compatible = "fsl,imx-audio-wm8904"; + model = "wm8904-audio"; + audio-cpu = <&sai3>; + audio-codec = <&wm8904>; + audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "AMIC", "MICBIAS", + "IN2L", "AMIC"; + }; +}; + +&enetc_port0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enetc0>; + phy-handle = <ðphy0>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&flexspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi1>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi1_reset>; + reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <200000000>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + }; +}; + +&lpi2c4 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c4>; + status = "okay"; + + wm8904: codec@1a { + #sound-dai-cells = <0>; + compatible = "wlf,wm8904"; + reg = <0x1a>; + clocks = <&scmi_clk IMX95_CLK_SAI3>; + clock-names = "mclk"; + AVDD-supply = <®_1p8v>; + CPVDD-supply = <®_1p8v>; + DBVDD-supply = <®_1p8v>; + DCVDD-supply = <®_1p8v>; + MICVDD-supply = <®_1p8v>; + }; +}; + +&lpi2c5 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c5>; + status = "okay"; +}; + +&lpi2c6 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c6>; + status = "okay"; +}; + +&lpi2c7 { + clock-frequency = <1000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c7>; + status = "okay"; + + i2c7_pcal6524: i2c7-gpio@23 { + compatible = "nxp,pcal6524"; + reg = <0x23>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c7_pcal6524>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio5>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + }; + + /* Current measurement at SoM 5V power output */ + hwmon@41 { + compatible = "ti,ina219"; + reg = <0x41>; + shunt-resistor = <10000>; + }; + + /* Current measurement at Board power input */ + hwmon@45 { + compatible = "ti,ina219"; + reg = <0x45>; + shunt-resistor = <10000>; + }; + + eeprom@50 { + compatible = "st,24c02"; + reg = <0x50>; + }; + + ptn5110: tcpc@52 { + compatible = "nxp,ptn5110", "tcpci"; + reg = <0x52>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_typec>; + interrupt-parent = <&gpio5>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + + typec_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + data-role = "dual"; + try-power-role = "sink"; + source-pdos = ; + sink-pdos = ; + op-sink-microwatt = <15000000>; + self-powered; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + typec_con_hs: endpoint { + remote-endpoint = <&usb3_data_hs>; + }; + }; + + port@1 { + reg = <1>; + + typec_con_ss: endpoint { + remote-endpoint = <&usb3_data_ss>; + }; + }; + }; + }; + }; +}; + +&lpuart1 { + /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&mu7 { + status = "okay"; +}; + +&netcmix_blk_ctrl { + status = "okay"; +}; + +&netc_blk_ctrl { + status = "okay"; +}; + +&netc_emdio { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emdio>; + status = "okay"; + + ethphy0: ethernet-phy@1 { + reg = <1>; + realtek,clkout-disable; + }; +}; + +&pcie0 { + pinctrl-0 = <&pinctrl_pcie0>; + pinctrl-names = "default"; + reset-gpio = <&i2c7_pcal6524 17 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_pcie0>; + status = "okay"; +}; + +&pcie1 { + pinctrl-0 = <&pinctrl_pcie1>; + pinctrl-names = "default"; + reset-gpio = <&i2c7_pcal6524 16 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&sai1 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai1>; + assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>, + <&scmi_clk IMX95_CLK_AUDIOPLL2>, + <&scmi_clk IMX95_CLK_SAI1>; + assigned-clock-parents = <0>, <0>, <0>, <0>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>; + assigned-clock-rates = <3932160000>, + <3612672000>, <393216000>, + <361267200>, <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +&sai3 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>, + <&scmi_clk IMX95_CLK_AUDIOPLL2>, + <&scmi_clk IMX95_CLK_SAI3>; + assigned-clock-parents = <0>, <0>, <0>, <0>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>; + assigned-clock-rates = <3932160000>, + <3612672000>, <393216000>, + <361267200>, <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + usb-role-switch; + role-switch-default-mode = "peripheral"; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + status = "okay"; + + port { + usb3_data_hs: endpoint { + remote-endpoint = <&typec_con_hs>; + }; + }; +}; + +&usb3_phy { + fsl,phy-tx-preemp-amp-tune-microamp = <600>; + orientation-switch; + status = "okay"; + + port { + usb3_data_ss: endpoint { + remote-endpoint = <&typec_con_ss>; + }; + }; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + pinctrl-3 = <&pinctrl_usdhc1>; + bus-width = <8>; + non-removable; + no-sdio; + no-sd; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-3 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + bus-width = <4>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + mmc-pwrseq = <&usdhc3_pwrseq>; + vmmc-supply = <®_pcie0>; + bus-width = <4>; + keep-power-in-suspend; + non-removable; + status = "okay"; +}; + +&scmi_misc { + nxp,ctrl-ids = ; +}; + +&wdog3 { + fsl,ext-reset-output; + status = "okay"; +}; + +&scmi_iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_hog: hoggrp { + fsl,pins = + ; + }; + + pinctrl_emdio: emdiogrp { + fsl,pins = + , + ; + }; + + pinctrl_enetc0: enetc0grp { + fsl,pins = + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_flexspi1: flexspi1grp { + fsl,pins = + , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_flexspi1_reset: flexspi1-reset-grp { + fsl,pins = + ; + }; + + pinctrl_hp: hpgrp { + fsl,pins = + ; + }; + + pinctrl_i2c4_pcal6408: i2c4pcal6498grp { + fsl,pins = + ; + }; + + pinctrl_i2c7_pcal6524: i2c7pcal6524grp { + fsl,pins = + ; + }; + + pinctrl_lpi2c4: lpi2c4grp { + fsl,pins = + , + ; + }; + + pinctrl_lpi2c5: lpi2c5grp { + fsl,pins = + , + ; + }; + + pinctrl_lpi2c6: lpi2c6grp { + fsl,pins = + , + ; + }; + + pinctrl_lpi2c7: lpi2c7grp { + fsl,pins = + , + ; + }; + + pinctrl_pcal6416: pcal6416grp { + fsl,pins = + ; + }; + + pinctrl_pcie0: pcie0grp { + fsl,pins = + ; + }; + + pinctrl_pcie1: pcie1grp { + fsl,pins = + ; + }; + + pinctrl_pdm: pdmgrp { + fsl,pins = + , + ; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = + ; + }; + + pinctrl_sai1: sai1grp { + fsl,pins = + , + , + , + ; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = + , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = + , + , + , + , + ; + }; + + pinctrl_tpm6: tpm6grp { + fsl,pins = + ; + }; + + pinctrl_typec: typecgrp { + fsl,pins = + ; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = + , + ; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = + , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = + , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = + , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = + ; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = + , + , + , + , + , + , + ; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = + , + , + , + , + , + , + ; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = + , + , + , + , + , + , + ; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = + , + , + , + , + , + ; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx95-toradex-smarc-dev.dts b/arch/arm64/boot/dts/freescale/imx95-toradex-smarc-dev.dts new file mode 100644 index 00000000000000..5b05f256fd52ec --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx95-toradex-smarc-dev.dts @@ -0,0 +1,277 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2025 Toradex + * + * https://www.toradex.com/computer-on-modules/smarc-arm-family/nxp-imx95 + * https://www.toradex.com/products/carrier-board/smarc-development-board-kit + */ + +/dts-v1/; + +#include +#include "imx95-toradex-smarc.dtsi" + +/ { + model = "Toradex SMARC iMX95 on Toradex SMARC Development Board"; + compatible = "toradex,smarc-imx95-dev", + "toradex,smarc-imx95", + "fsl,imx95"; + + reg_carrier_1p8v: regulator-carrier-1p8v { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "On-carrier 1V8"; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,bitclock-master = <&codec_dai>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&codec_dai>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,name = "tdx-smarc-wm8904"; + simple-audio-card,routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "IN2L", "Line In Jack", + "IN2R", "Line In Jack", + "Microphone Jack", "MICBIAS", + "IN1L", "Microphone Jack"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Line", "Line In Jack"; + + codec_dai: simple-audio-card,codec { + clocks = <&scmi_clk IMX95_CLK_SAI3>; + sound-dai = <&wm8904_1a>; + }; + + simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + }; +}; + +/* SMARC GBE0 */ +&enetc_port0 { + status = "okay"; +}; + +/* SMARC GBE1 */ +&enetc_port1 { + status = "okay"; +}; + +/* SMARC CAN0 */ +&flexcan1 { + status = "okay"; +}; + +/* SMARC CAN1 */ +&flexcan2 { + status = "okay"; +}; + +&gpio2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio12>, <&pinctrl_gpio13>; +}; + +&gpio4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio10>, <&pinctrl_gpio11>; +}; + +&gpio5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio2>, + <&pinctrl_gpio3>, + <&pinctrl_gpio4>, + <&pinctrl_gpio6>, + <&pinctrl_gpio8>, + <&pinctrl_gpio9>; +}; + +/* SMARC I2C_CAM0 */ +&i2c_cam0 { + status = "okay"; +}; + +/* SMARC I2C_CAM1 */ +&i2c_cam1 { + status = "okay"; +}; + +/* SMARC I2C_GP */ +&lpi2c2 { + status = "okay"; + + wm8904_1a: audio-codec@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>, <&pinctrl_sai3_mclk>; + #sound-dai-cells = <0>; + clocks = <&scmi_clk IMX95_CLK_SAI3>; + clock-names = "mclk"; + AVDD-supply = <®_carrier_1p8v>; + CPVDD-supply = <®_carrier_1p8v>; + DBVDD-supply = <®_carrier_1p8v>; + DCVDD-supply = <®_carrier_1p8v>; + MICVDD-supply = <®_carrier_1p8v>; + }; + + temperature-sensor@4f { + compatible = "ti,tmp1075"; + reg = <0x4f>; + }; + + eeprom@57 { + compatible = "st,24c02", "atmel,24c02"; + reg = <0x57>; + pagesize = <16>; + }; + +}; + +/* SMARC I2C_PM */ +&lpi2c3 { + clock-frequency = <100000>; + status = "okay"; + + fan_controller: fan@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + #pwm-cells = <2>; + + fan { + cooling-levels = <255>; + pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>; + }; + }; + + /* Current measurement into module VCC */ + hwmon@40 { + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <5000>; + }; +}; + +/* SMARC I2C_LCD */ +&lpi2c5 { + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9543"; + reg = <0x70>; + i2c-mux-idle-disconnect; + #address-cells = <1>; + #size-cells = <0>; + + /* I2C on DSI Connector Pins 4/6 */ + i2c_dsi_0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + /* I2C on DSI Connector Pins 52/54 */ + i2c_dsi_1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +/* SMARC SPI0 */ +&lpspi6 { + status = "okay"; +}; + +/* SMARC SER1, used as the Linux Console */ +&lpuart1 { + status = "okay"; +}; + +/* SMARC SER0, RS485 */ +&lpuart2 { + linux,rs485-enabled-at-boot-time; + rs485-rts-active-low; + rs485-rx-during-tx; + status = "okay"; +}; + +/* SMARC SER3, RS232 */ +&lpuart3 { + status = "okay"; +}; + +/* SMARC MDIO, shared between all ethernet ports */ +&netc_emdio { + status = "okay"; + + ethphy3: ethernet-phy@4 { + reg = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio7>; + interrupt-parent = <&gpio5>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +/* SMARC PCIE_A / M2 Key B */ +&pcie0 { + status = "okay"; +}; + +/* SMARC PCIE_B / M2 Key E */ +&pcie1 { + status = "okay"; +}; + +/* SMARC I2S0 */ +&sai3 { + status = "okay"; +}; + +/* SMARC LCD0_BKLT_PWM */ +&tpm3 { + status = "okay"; +}; + +/* SMARC LCD1_BKLT_PWM */ +&tpm4 { + status = "okay"; +}; + +/* SMARC GPIO5 as PWM */ +&tpm5 { + status = "okay"; +}; + +/* SMARC USB0 */ +&usb2 { + status = "okay"; +}; + +/* SMARC USB1..4 */ +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + status = "okay"; +}; + +&usb3_phy { + status = "okay"; +}; + +/* SMARC SDIO */ +&usdhc2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi b/arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi new file mode 100644 index 00000000000000..115a16e44a999a --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi @@ -0,0 +1,1153 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (C) 2025 Toradex + * + * https://www.toradex.com/computer-on-modules/smarc-arm-family/nxp-imx95 + */ + +#include +#include +#include "imx95.dtsi" + +/ { + aliases { + can0 = &flexcan1; + can1 = &flexcan2; + ethernet0 = &enetc_port0; + ethernet1 = &enetc_port1; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + rtc0 = &rtc_i2c; + rtc1 = &scmi_bbm; + serial0 = &lpuart2; + serial1 = &lpuart1; + serial3 = &lpuart3; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + clk_dsi2dp_bridge: clock-dsi2dp-bridge { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; + + clk_serdes_eth_ref: clock-eth-ref { + compatible = "gpio-gate-clock"; + #clock-cells = <0>; + /* CTRL_ETH_REF_CLK_STBY# */ + enable-gpios = <&som_gpio_expander_1 13 GPIO_ACTIVE_HIGH>; + }; + + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + /* SMARC P64 - USB0_OTG_ID */ + id-gpios = <&som_gpio_expander_0 3 GPIO_ACTIVE_HIGH>; + label = "USB0"; + self-powered; + type = "micro"; + vbus-supply = <®_usb0_vbus>; + + port { + usb_dr_connector: endpoint { + remote-endpoint = <&usb0_otg_id>; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + smarc_key_sleep: key-sleep { + gpios = <&som_ec_gpio_expander 4 GPIO_ACTIVE_LOW>; + label = "SMARC_SLEEP#"; + wakeup-source; + linux,code = ; + }; + + smarc_switch_lid: switch-lid { + gpios = <&som_ec_gpio_expander 2 GPIO_ACTIVE_LOW>; + label = "SMARC_LID#"; + linux,code = ; + linux,input-type = ; + }; + }; + + reg_module_1p8v: regulator-module-1p8v { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "On-module +V1.8"; + }; + + /* Non PMIC On-module Supplies */ + reg_module_dp_1p2v: regulator-module-dp-1p2v { + compatible = "regulator-fixed"; + regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1200000>; + regulator-name = "On-module +V1.2_DP"; + vin-supply = <®_module_1p8v>; + }; + + reg_usb0_vbus: regulator-usb0-vbus { + compatible = "regulator-fixed"; + /* SMARC P62 - USB0_EN_OC# */ + gpios = <&som_gpio_expander_0 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-name = "USB0_EN_OC#"; + }; + + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + /* CTRL_V_BUS_USB_HUB or SMARC P71 - USB2_EN_OC# */ + gpios = <&som_gpio_expander_0 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-name = "CTRL_V_BUS_USB_HUB"; + }; + + reg_usdhc2_vmmc: regulator-vmmc-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_pwr_en>; + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + off-on-delay-us = <100000>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "SDIO_PWR_EN"; + startup-delay-us = <20000>; + }; + + reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc { + compatible = "regulator-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_vsel>; + gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + states = <1800000 0x1>, + <3300000 0x0>; + regulator-name = "PMIC_SD2_VSEL"; + }; + + reg_wifi_en: regulator-wifi-en { + compatible = "regulator-fixed"; + /* CTRL_EN_WIFI */ + gpios = <&som_gpio_expander_1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "CTRL_EN_WIFI"; + startup-delay-us = <2000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + linux_cma: linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0 0x3c000000>; + alloc-ranges = <0 0x80000000 0 0x7F000000>; + linux,cma-default; + }; + }; +}; + +/* SMARC GBE0 */ +&enetc_port0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enetc0>, <&pinctrl_enetc0_1588_tmr>; + phy-handle = <ðphy1>; + phy-mode = "rgmii-id"; +}; + +/* SMARC GBE1 */ +&enetc_port1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enetc1>, <&pinctrl_enetc1_1588_tmr>; + phy-handle = <ðphy2>; + phy-mode = "rgmii-id"; +}; + +/* SMARC CAN0 */ +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; +}; + +/* SMARC CAN1 */ +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; +}; + +&gpio1 { + gpio-line-names = "", /* 0 */ + "", + "SMARC_I2C_GP_CK", + "SMARC_I2C_GP_DAT", + "", + "", + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "", + "CTRL_IO_EXP_INT_B"; + status = "okay"; +}; + +&gpio2 { + gpio-line-names = "SMARC_SPI0_CS0#", /* 0 */ + "", + "", + "", + "", + "", + "SMARC_GPIO5", + "", + "I2C_CAM_DAT", + "I2C_CAM_CK", + "SMARC_GPIO12", /* 10 */ + "SMARC_GPIO13", + "", + "", + "", + "", + "", + "", + "SMARC_SPI1_CS0#", + "", + "", /* 20 */ + "", + "SMARC_I2C_LCD_DAT", + "SMARC_I2C_LCD_CK", + "SMARC_SPI0_CS1#", + "", + "", + "", + "SMARC_I2C_PM_DAT", + "SMARC_I2C_PM_CK", + "I2C_SOM_DAT", /* 30 */ + "I2C_SOM_CK"; + status = "okay"; +}; + +&gpio3 { + gpio-line-names = "SMARC_SDIO_CD#", /* 0 */ + "", + "", + "", + "", + "", + "", + "SMARC_SDIO_PWR_EN", + "", + "", + "", /* 10 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "PMIC_SD2_VSEL"; + status = "okay"; +}; + +&gpio4 { + gpio-line-names = "", /* 0 */ + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "", + "SMARC_GPIO11", + "SMARC_GPIO10", + "", + "", + "", + "", + "", /* 20 */ + "", + "", + "", + "", + "", + "", + "", + "SMARC_SMB_ALERT#"; + status = "okay"; +}; + +&gpio5 { + gpio-line-names = "SMARC_GPIO2", /* 0 */ + "SMARC_GPIO3", + "SMARC_GPIO4", + "SMARC_GPIO6", + "", + "", + "", + "", + "SMARC_GPIO9", + "SMARC_GPIO7", + "SMARC_GPIO8", /* 10 */ + "SMARC_SPI1_CS1#", + "", + "SPI1_TPM_CS#"; + status = "okay"; +}; + +/* SMARC I2C_GP */ +&lpi2c2 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c2>; + pinctrl-1 = <&pinctrl_lpi2c2_gpio>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + scl-gpios = <&gpio1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + eeprom@50 { + compatible = "st,24c32", "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + }; +}; + +/* SMARC I2C_PM */ +&lpi2c3 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c3>; + pinctrl-1 = <&pinctrl_lpi2c3_gpio>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + scl-gpios = <&gpio2 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio2 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; +}; + +/* I2C_SOM */ +&lpi2c4 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c4>, <&pinctrl_ctrl_io_exp_int_b>; + pinctrl-1 = <&pinctrl_lpi2c4_gpio>, <&pinctrl_ctrl_io_exp_int_b>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + scl-gpios = <&gpio2 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + som_gpio_expander_0: gpio@20 { + compatible = "nxp,pcal6408"; + reg = <0x20>; + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio1>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + #gpio-cells = <2>; + gpio-controller; + gpio-line-names = + "SMARC_PCIE_WAKE#", /* 0 */ + "SMARC_PCIE_B_RST#", + "SMARC_PCIE_A_RST#", + "SMARC_USB0_OTG_ID", + "SMARC_USB0_EN", /* SMARC USB0_EN_OC# - Open Drain Output */ + "SMARC_USB0_OC#", /* SMARC USB0_EN_OC# - Over-Current Sense Input */ + "", + "SMARC_PCIE_C_RST#"; + }; + + som_gpio_expander_1: gpio@21 { + compatible = "nxp,pcal6416"; + reg = <0x21>; + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio1>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + #gpio-cells = <2>; + gpio-controller; + gpio-line-names = + "SMARC_GPIO0", /* 0 */ + "SMARC_GPIO1", + "SMARC_LCD0_VDD_EN", + "SMARC_LCD0_BKLT_EN", + "SMARC_LCD1_VDD_EN", + "SMARC_LCD1_BKLT_EN", + "", + "", + "", + "", + "", /* 10 */ + "", + "", + "", + "", + "SMARC_SDIO_WP"; + }; + + embedded-controller@28 { + compatible = "toradex,smarc-imx95-ec", "toradex,smarc-ec"; + reg = <0x28>; + }; + + som_ec_gpio_expander: gpio@29 { + compatible = "toradex,ecgpiol16", "nxp,pcal6416"; + reg = <0x29>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ec_int>; + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio1>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + #gpio-cells = <2>; + gpio-controller; + gpio-line-names = + "SMARC_CHARGER_PRSNT#", + "SMARC_CHARGING#", + "SMARC_LID#", + "SMARC_BATLOW#", + "SMARC_SLEEP#"; + }; + + /* SMARC DP0 */ + som_dsi2dp_bridge: bridge@2c { + compatible = "ti,sn65dsi86"; + reg = <0x2c>; + clocks = <&clk_dsi2dp_bridge>; + clock-names = "refclk"; + vcc-supply = <®_module_dp_1p2v>; + vcca-supply = <®_module_dp_1p2v>; + vccio-supply = <®_module_1p8v>; + vpll-supply = <®_module_1p8v>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sn65dsi86_in: endpoint { + }; + }; + + port@1 { + reg = <1>; + + sn65dsi86_out: endpoint { + data-lanes = <3 2 1 0>; + }; + }; + }; + }; + + rtc_i2c: rtc@32 { + compatible = "epson,rx8130"; + reg = <0x32>; + }; + + temperature-sensor@48 { + compatible = "ti,tmp1075"; + reg = <0x48>; + }; + + eeprom@50 { + compatible = "st,24c02", "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +/* SMARC I2C_LCD */ +&lpi2c5 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c5>; + pinctrl-1 = <&pinctrl_lpi2c5_gpio>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + scl-gpios = <&gpio2 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio2 22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; +}; + +/* I2C_CAM */ +&lpi2c7 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c7>; + pinctrl-1 = <&pinctrl_lpi2c7_gpio>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + scl-gpios = <&gpio2 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio2 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9543"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + /* SMARC I2C_CAM0 */ + i2c_cam0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + /* SMARC I2C_CAM1 */ + i2c_cam1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +/* SMARC SPI1 */ +&lpspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi4>; + cs-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>, + <&gpio5 11 GPIO_ACTIVE_LOW>, + <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; + + som_tpm: tpm@2 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <0x2>; + spi-max-frequency = <18500000>; + }; +}; + +/* SMARC SPI0 */ +&lpspi6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi6>; + cs-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>, + <&gpio2 24 GPIO_ACTIVE_LOW>; +}; + +/* SMARC SER1, used as the Linux Console */ +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; +}; + +/* SMARC SER0 */ +&lpuart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; +}; + +/* SMARC SER3 */ +&lpuart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; +}; + +/* SMARC MDIO, shared between all ethernet ports */ +&netc_emdio { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emdio>; + + ethphy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&som_gpio_expander_1>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + }; + + ethphy2: ethernet-phy@2 { + reg = <2>; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + }; +}; + +&netcmix_blk_ctrl { + status = "okay"; +}; + +&netc_blk_ctrl { + status = "okay"; +}; + +&netc_timer { + status = "okay"; +}; + +/* SMARC PCIE_A */ +&pcie0 { + pinctrl-0 = <&pinctrl_pcie0>; + pinctrl-names = "default"; + reset-gpios = <&som_gpio_expander_0 2 GPIO_ACTIVE_LOW>; +}; + +/* SMARC PCIE_B */ +&pcie1 { + pinctrl-0 = <&pinctrl_pcie1>; + pinctrl-names = "default"; + reset-gpios = <&som_gpio_expander_0 1 GPIO_ACTIVE_LOW>; +}; + +/* SMARC I2S0 */ +&sai3 { + #sound-dai-cells = <0>; + assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>, + <&scmi_clk IMX95_CLK_AUDIOPLL2>, + <&scmi_clk IMX95_CLK_SAI3>; + assigned-clock-parents = <0>, <0>, <0>, <0>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>; + assigned-clock-rates = <3932160000>, + <3612672000>, <393216000>, + <361267200>, <12288000>; + fsl,sai-mclk-direction-output; +}; + +&thermal_zones { + /* PF09 Main PMIC */ + pf09-thermal { + polling-delay = <2000>; + polling-delay-passive = <250>; + thermal-sensors = <&scmi_sensor 2>; + + trips { + trip0 { + hysteresis = <2000>; + temperature = <155000>; + type = "critical"; + }; + }; + }; + + /* PF53 VDD_ARM PMIC */ + pf53-arm-thermal { + polling-delay = <2000>; + polling-delay-passive = <250>; + thermal-sensors = <&scmi_sensor 4>; + + trips { + trip0 { + hysteresis = <2000>; + temperature = <155000>; + type = "critical"; + }; + }; + }; + + /* PF53 VDD_SOC PMIC */ + pf53-soc-thermal { + polling-delay = <2000>; + polling-delay-passive = <250>; + thermal-sensors = <&scmi_sensor 3>; + + trips { + trip0 { + hysteresis = <2000>; + temperature = <155000>; + type = "critical"; + }; + }; + }; +}; + +/* SMARC LCD0_BKLT_PWM */ +&tpm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd0_bklt_pwm>; +}; + +/* SMARC LCD1_BKLT_PWM */ +&tpm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd1_bklt_pwm>; +}; + +/* SMARC GPIO5 as PWM */ +&tpm5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio5_pwm>; +}; + +/* SMARC USB0 */ +&usb2 { + adp-disable; + dr_mode = "otg"; + hnp-disable; + srp-disable; + usb-role-switch; + vbus-supply = <®_usb0_vbus>; + + port { + usb0_otg_id: endpoint { + remote-endpoint = <&usb_dr_connector>; + }; + }; +}; + +&usb3 { + fsl,disable-port-power-control; +}; + +/* SMARC USB1..4 */ +&usb3_dwc3 { + dr_mode = "host"; +}; + +&usb3_phy { + vbus-supply = <®_usb1_vbus>; +}; + +/* On-module eMMC */ +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + non-removable; + no-sdio; + no-sd; + status = "okay"; +}; + +/* SMARC SDIO */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_cd>; + pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_cd>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>,<&pinctrl_usdhc2_cd>; + pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd>; + cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + vqmmc-supply = <®_usdhc2_vqmmc>; + wp-gpios = <&som_gpio_expander_1 15 GPIO_ACTIVE_HIGH>; +}; + +/* On-module Wi-Fi */ +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + keep-power-in-suspend; + non-removable; + vmmc-supply = <®_wifi_en>; +}; + +&scmi_bbm { + linux,code = ; +}; + +&wdog3 { + fsl,ext-reset-output; + status = "okay"; +}; + +&scmi_iomuxc { + /* SMARC CAM_MCK */ + pinctrl_cam_mck: cammckgrp { + fsl,pins = ; /* SMARC S6 - CAM_MCK */ + }; + + pinctrl_ec_int: ecintgrp { + fsl,pins = ; /* SAI1_TXFS - EC_MCU_INT# */ + }; + + /* SMARC MDIO, shared between all ethernet ports */ + pinctrl_emdio: emdiogrp { + fsl,pins = , /* SMARC S45 - MDIO_CLK */ + ; /* SMARC S46 - MDIO_DAT */ + }; + + /* SMARC GBE0 */ + pinctrl_enetc0: enetc0grp { + fsl,pins = , /* ENET1_TX_CTL */ + , /* ENET1_TXC */ + , /* ENET1_TDO */ + , /* ENET1_TD1 */ + , /* ENET1_TD2 */ + , /* ENET1_TD3 */ + , /* ENET1_RX_CTL */ + , /* ENET1_RXC */ + , /* ENET1_RD0 */ + , /* ENET1_RD1 */ + , /* ENET1_RD2 */ + ; /* ENET1_RD3 */ + }; + + /* SMARC GBE0_SDP */ + pinctrl_enetc0_1588_tmr: enetc01588tmrgrp { + fsl,pins = ; /* SMARC P6 - GBE0_SDP */ + }; + + /* SMARC GBE1 */ + pinctrl_enetc1: enetc1grp { + fsl,pins = , /* ENET2_TX_CTL */ + , /* ENET2_TXC */ + , /* ENET2_TD0 */ + , /* ENET2_TD1 */ + , /* ENET2_TD2 */ + , /* ENET2_TD3 */ + , /* ENET2_RX_CTL */ + , /* ENET2_RXC */ + , /* ENET2_RD0 */ + , /* ENET2_RD1 */ + , /* ENET2_RD2 */ + ; /* ENET2_RD3 */ + }; + + /* SMARC GBE1_SDP */ + pinctrl_enetc1_1588_tmr: enetc11588tmrgrp { + fsl,pins = ; /* SMARC P5 - GBE1_SDP */ + }; + + /* SMARC CAN0 */ + pinctrl_flexcan1: flexcan1grp { + fsl,pins = , /* SMARC P143 - CAN0_TX */ + ; /* SMARC P144 - CAN0_RX */ + }; + + /* SMARC CAN1 */ + pinctrl_flexcan2: flexcan2grp { + fsl,pins = , /* SMARC P145 - CAN1_TX */ + ; /* SMARC P146 - CAN1_RX */ + }; + + /* SMARC GPIO2 */ + pinctrl_gpio2: gpio2grp { + fsl,pins = ; /* SMARC P110 - GPIO2 */ + }; + + /* SMARC GPIO3 */ + pinctrl_gpio3: gpio3grp { + fsl,pins = ; /* SMARC P111 - GPIO3 */ + }; + + /* SMARC GPIO4 */ + pinctrl_gpio4: gpio4grp { + fsl,pins = ; /* SMARC P112 - GPIO4 */ + }; + + /* SMARC GPIO5 */ + pinctrl_gpio5: gpio5grp { + fsl,pins = ; /* SMARC P113 - GPIO5 */ + }; + + /* SMARC GPIO5 as PWM */ + pinctrl_gpio5_pwm: gpio5pwmgrp { + fsl,pins = ; /* SMARC P113 - PWM_OUT */ + }; + + /* SMARC GPIO6 */ + pinctrl_gpio6: gpio6grp { + fsl,pins = ; /* SMARC P114 - GPIO6 */ + }; + + /* SMARC GPIO7 */ + pinctrl_gpio7: gpio7grp { + fsl,pins = ; /* SMARC P115 - GPIO7 */ + }; + + /* SMARC GPIO8 */ + pinctrl_gpio8: gpio8grp { + fsl,pins = ; /* SMARC P116 - GPIO8 */ + }; + + /* SMARC GPIO9 */ + pinctrl_gpio9: gpio9grp { + fsl,pins = ; /* SMARC P117 - GPIO9 */ + }; + + /* SMARC GPIO10 */ + pinctrl_gpio10: gpio10grp { + fsl,pins = ; /* SMARC P118 - GPIO10 */ + }; + + /* SMARC GPIO11 */ + pinctrl_gpio11: gpio11grp { + fsl,pins = ; /* SMARC P119 - GPIO11 */ + }; + + /* SMARC GPIO12 */ + pinctrl_gpio12: gpio12grp { + fsl,pins = ; /* SMARC S142 - GPIO12 */ + }; + + /* SMARC GPIO13 */ + pinctrl_gpio13: gpio13grp { + fsl,pins = ; /* SMARC S123 - GPIO13 */ + }; + + pinctrl_ctrl_io_exp_int_b: ioexpintgrp { + fsl,pins = ; /* CTRL_IO_EXP_INT_B */ + }; + + /* SMARC LCD0_BKLT_PWM */ + pinctrl_lcd0_bklt_pwm: lcd0bkltpwmgrp { + fsl,pins = ; /* SMARC S141 - LCD0_BKLT_PWM */ + }; + + /* SMARC LCD1_BKLT_PWM */ + pinctrl_lcd1_bklt_pwm: lcd1bkltpwmgrp { + fsl,pins = ; /* SMARC S122 - LCD1_BKLT_PWM */ + }; + + /* SMARC I2C_GP */ + pinctrl_lpi2c2: lpi2c2grp { + fsl,pins = , /* SMARC S48 - I2C_GP_CK */ + ; /* SMARC S49 - I2C_GP_DAT */ + }; + + /* SMARC I2C_GP as GPIOs */ + pinctrl_lpi2c2_gpio: lpi2c2gpiogrp { + fsl,pins = , /* SMARC S48 - I2C_GP_CK */ + ; /* SMARC S49 - I2C_GP_DAT */ + }; + + /* SMARC I2C_PM */ + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = , /* SMARC P122 - I2C_PM_DAT */ + ; /* SMARC P121 - I2C_PM_CK */ + }; + + /* SMARC I2C_PM as GPIOs */ + pinctrl_lpi2c3_gpio: lpi2c3gpiogrp { + fsl,pins = , /* SMARC P122 - I2C_PM_DAT */ + ; /* SMARC P121 - I2C_PM_CK */ + }; + + /* I2C_SOM */ + pinctrl_lpi2c4: lpi2c4grp { + fsl,pins = , /* I2C_SOM_CK */ + ; /* I2C_SOM_DAT */ + }; + + /* I2C_SOM as GPIOs */ + pinctrl_lpi2c4_gpio: lpi2c4gpiogrp { + fsl,pins = , /* I2C_SOM_CK */ + ; /* I2C_SOM_DAT */ + }; + + /* SMARC I2C_LCD */ + pinctrl_lpi2c5: lpi2c5grp { + fsl,pins = , /* SMARC S140 - I2C_LCD_DAT */ + ; /* SMARC S139 - I2C_LCD_CK */ + }; + + /* SMARC I2C_LCD as GPIOs */ + pinctrl_lpi2c5_gpio: lpi2c5gpiogrp { + fsl,pins = , /* SMARC S140 - I2C_LCD_DAT */ + ; /* SMARC S139 - I2C_LCD_CK */ + }; + + /* I2C_CAM */ + pinctrl_lpi2c7: lpi2c7grp { + fsl,pins = , /* I2C_CAM_DAT */ + ; /* I2C_CAM_CK */ + }; + + /* I2C_CAM as GPIOs */ + pinctrl_lpi2c7_gpio: lpi2c7gpiogrp { + fsl,pins = , /* I2C_CAM_DAT */ + ; /* I2C_CAM_CK */ + }; + + /* SMARC SPI1 */ + pinctrl_lpspi4: lpspi4grp { + fsl,pins = , /* SMARC P56 - SPI1_CK */ + , /* SMARC P58 - SPI1_DO */ + , /* SMARC P57 - SPI1_DIN */ + , /* SPI1_TPM_CS# */ + , /* SMARC P54 - SPI1_CS0# */ + ; /* SMARC P55 - SPI1_CS1# */ + }; + + /* SMARC SPI0 */ + pinctrl_lpspi6: lpspi6grp { + fsl,pins = , /* SMARC P43 - SPI0_CS0# */ + , /* SMARC P31 - SPI0_CS1# */ + , /* SMARC P45 - SPI0_DIN */ + , /* SMARC P46 - SPI0_DO */ + ; /* SMARC P44 - SPI0_CK */ + }; + + /* SMARC PCIE_A */ + pinctrl_pcie0: pcie0grp { + fsl,pins = ; /* SMARC P78 - PCIE_A_CKREQ# */ + }; + + /* SMARC PCIE_B */ + pinctrl_pcie1: pcie1grp { + fsl,pins = ; /* SMARC P77 - PCIE_B_CKREQ# */ + }; + + /* SMARC I2S0 */ + pinctrl_sai3: sai3grp { + fsl,pins = , /* SMARC S38 - I2S0_CK */ + , /* SMARC S41 - I2S0_SDIN */ + , /* SMARC S40 - I2S0_SDOUT */ + ; /* SMARC S39 - I2S0_LRCK */ + }; + + /* SMARC AUDIO_MCK */ + pinctrl_sai3_mclk: sai3mclkgrp { + fsl,pins = ; /* SMARC S42 - AUDIO_MCK */ + }; + + /* SMARC I2S2 */ + pinctrl_sai5: sai5grp { + fsl,pins = , /* SMARC S53 - I2S2_CK */ + , /* SMARC S51 - I2S2_SDOUT */ + , /* SMARC S52 - I2S2_SDIN */ + ; /* SMARC S50 - I2S2_LRCK */ + }; + + /* SMARC SMB_ALERT# */ + pinctrl_smb_alert_gpio: smbalertgrp { + fsl,pins = ; /* SMARC P1 - SMB_ALERT# */ + }; + + /* SMARC SER1, used as the Linux Console */ + pinctrl_uart1: uart1grp { + fsl,pins = , /* SMARC P134 - SER1_TX */ + ; /* SMARC P135 - SER1_RX */ + }; + + /* SMARC SER0 */ + pinctrl_uart2: uart2grp { + fsl,pins = , /* SMARC P132 - SER0_CTS# */ + , /* SMARC P131 - SER0_RTS# */ + , /* SMARC P130 - SER0_RX */ + ; /* SMARC P129 - SER0_TX */ + }; + + /* SMARC SER3 */ + pinctrl_uart3: uart3grp { + fsl,pins = , /* SMARC P140 - SER3_TX */ + ; /* SMARC P141 - SER3_RX */ + }; + + /* On-module eMMC */ + pinctrl_usdhc1: usdhc1grp { + fsl,pins = , /* SD1_CLK */ + , /* SD1_CMD */ + , /* SD1_DATA0 */ + , /* SD1_DATA1 */ + , /* SD1_DATA2 */ + , /* SD1_DATA3 */ + , /* SD1_DATA4 */ + , /* SD1_DATA5 */ + , /* SD1_DATA6 */ + , /* SD1_DATA7 */ + ; /* SD1_STROBE */ + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = , /* SD1_CLK */ + , /* SD1_CMD */ + , /* SD1_DATA0 */ + , /* SD1_DATA1 */ + , /* SD1_DATA2 */ + , /* SD1_DATA3 */ + , /* SD1_DATA4 */ + , /* SD1_DATA5 */ + , /* SD1_DATA6 */ + , /* SD1_DATA7 */ + ; /* SD1_STROBE */ + }; + + /* SMARC SDIO */ + pinctrl_usdhc2: usdhc2grp { + fsl,pins = , /* SMARC P36 - SDIO_CK */ + , /* SMARC P34 - SDIO_CMD */ + , /* SMARC P39 - SDIO_D0 */ + , /* SMARC P40 - SDIO_D1 */ + , /* SMARC P41 - SDIO_D2 */ + ; /* SMARC P42 - SDIO_D3 */ + }; + + /* SMARC SDIO */ + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = , /* SMARC P36 - SDIO_CK */ + , /* SMARC P34 - SDIO_CMD */ + , /* SMARC P39 - SDIO_D0 */ + , /* SMARC P40 - SDIO_D1 */ + , /* SMARC P41 - SDIO_D2 */ + ; /* SMARC P42 - SDIO_D3 */ + }; + + /* SMARC SDIO */ + pinctrl_usdhc2_sleep: usdhc2-sleepgrp { + fsl,pins = , /* SMARC P36 - SDIO_CK */ + , /* SMARC P34 - SDIO_CMD */ + , /* SMARC P39 - SDIO_D0 */ + , /* SMARC P40 - SDIO_D1 */ + , /* SMARC P41 - SDIO_D2 */ + ; /* SMARC P42 - SDIO_D3 */ + }; + + /* SMARC SDIO_CD# */ + pinctrl_usdhc2_cd: usdhc2-cdgrp { + fsl,pins = ; /* SMARC P35 - SDIO_CD# */ + }; + + /* SMARC SDIO_PWR_EN */ + pinctrl_usdhc2_pwr_en: usdhc2-pwrengrp { + fsl,pins = ; /* SMARC P37 - SDIO_PWR_EN */ + }; + + pinctrl_usdhc2_vsel: usdhc2-vselgrp { + fsl,pins = ; /* PMIC_SD2_VSEL */ + }; + + /* On-module Wi-Fi */ + pinctrl_usdhc3: usdhc3grp { + fsl,pins = , /* SD3_CLK */ + , /* SD3_CMD */ + , /* SD3_DATA0 */ + , /* SD3_DATA1 */ + , /* SD3_DATA2 */ + ; /* SD3_DATA3 */ + }; + + /* On-module Wi-Fi */ + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = , /* SD3_CLK */ + , /* SD3_CMD */ + , /* SD3_DATA1 */ + , /* SD3_DATA2 */ + , /* SD3_DATA3 */ + ; /* SD3_DATA4 */ + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx95-tqma9596sa-mb-smarc-2.dts b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa-mb-smarc-2.dts index 5b6b2bb80b288b..97726eded0f864 100644 --- a/arch/arm64/boot/dts/freescale/imx95-tqma9596sa-mb-smarc-2.dts +++ b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa-mb-smarc-2.dts @@ -39,6 +39,8 @@ aliases { serial5 = &lpuart6; serial6 = &lpuart7; serial7 = &lpuart8; + spi0 = &flexspi1; + spi1 = &lpspi3; }; chosen { @@ -144,6 +146,13 @@ sound { model = "tqm-tlv320aic32"; audio-codec = <&tlv320aic3x04>; audio-cpu = <&sai3>; + audio-routing = + "IN3_L", "Mic Jack", + "Mic Jack", "Mic Bias", + "IN1_L", "Line In Jack", + "IN1_R", "Line In Jack", + "Line Out Jack", "LOL", + "Line Out Jack", "LOR"; }; }; @@ -172,15 +181,11 @@ pcie2-clk-en-hog { }; &flexcan1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1>; xceiver-supply = <®_3v3>; status = "okay"; }; &flexcan3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan3>; xceiver-supply = <®_3v3>; status = "okay"; }; @@ -204,15 +209,12 @@ eeprom2: eeprom@57 { }; &lpspi3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lpspi3>; - cs-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>, <&gpio2 7 GPIO_ACTIVE_LOW>; status = "okay"; }; /* SER0 */ &lpuart1 { - status = "disabled"; + status = "reserved"; }; /* SER3 */ @@ -232,27 +234,11 @@ &lpuart8 { /* X44 mPCIe */ &pcie0 { - pinctrl-0 = <&pinctrl_pcie0>; - pinctrl-names = "default"; - clocks = <&scmi_clk IMX95_CLK_HSIO>, - <&pcieclk 1>, - <&scmi_clk IMX95_CLK_HSIOPLL_VCO>, - <&scmi_clk IMX95_CLK_HSIOPCIEAUX>; - clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux"; - reset-gpio = <&expander2 9 GPIO_ACTIVE_LOW>; status = "okay"; }; /* X22 PCIe x1 socket */ &pcie1 { - pinctrl-0 = <&pinctrl_pcie1>; - pinctrl-names = "default"; - clocks = <&scmi_clk IMX95_CLK_HSIO>, - <&pcieclk 0>, - <&scmi_clk IMX95_CLK_HSIOPLL_VCO>, - <&scmi_clk IMX95_CLK_HSIOPCIEAUX>; - clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux"; - reset-gpio = <&expander2 10 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -261,39 +247,9 @@ ®_sdvmmc { }; &sai3 { - #sound-dai-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai3>; - assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, - <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, - <&scmi_clk IMX95_CLK_AUDIOPLL1>, - <&scmi_clk IMX95_CLK_AUDIOPLL2>, - <&scmi_clk IMX95_CLK_SAI3>; - assigned-clock-parents = <0>, <0>, <0>, <0>, - <&scmi_clk IMX95_CLK_AUDIOPLL1>; - assigned-clock-rates = <3932160000>, - <3612672000>, <393216000>, - <361267200>, <12288000>; - fsl,sai-mclk-direction-output; status = "okay"; }; -&sai5 { - #sound-dai-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sai5>; - assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, - <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, - <&scmi_clk IMX95_CLK_AUDIOPLL1>, - <&scmi_clk IMX95_CLK_AUDIOPLL2>, - <&scmi_clk IMX95_CLK_SAI5>; - assigned-clock-parents = <0>, <0>, <0>, <0>, - <&scmi_clk IMX95_CLK_AUDIOPLL1>; - assigned-clock-rates = <3932160000>, - <3612672000>, <393216000>, - <361267200>, <12288000>; -}; - /* X4 */ &usb2 { srp-disable; @@ -305,20 +261,9 @@ &usb2 { status = "okay"; }; - /* X16 */ &usdhc2 { - pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; - pinctrl-0 = <&pinctrl_usdhc2>; - pinctrl-1 = <&pinctrl_usdhc2_100mhz>; - pinctrl-2 = <&pinctrl_usdhc2_200mhz>; - pinctrl-3 = <&pinctrl_usdhc2>; - vmmc-supply = <®_sdvmmc>; - cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; - no-1-8-v; no-mmc; no-sdio; - disable-wp; - bus-width = <4>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi index 180124cc5bce1f..43418844701b13 100644 --- a/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi +++ b/arch/arm64/boot/dts/freescale/imx95-tqma9596sa.dtsi @@ -106,16 +106,25 @@ &netc_timer { status = "okay"; }; +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; +}; + +&flexcan3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan3>; +}; + &flexspi1 { - pinctrl-names = "default", "sleep"; + pinctrl-names = "default"; pinctrl-0 = <&pinctrl_flexspi1>; - pinctrl-1 = <&pinctrl_flexspi1>; status = "okay"; flash0: flash@0 { compatible = "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <80000000>; + spi-max-frequency = <66000000>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; vcc-supply = <®_1v8>; @@ -156,9 +165,8 @@ &gpio2 { &lpi2c1 { clock-frequency = <400000>; - pinctrl-names = "default", "sleep"; + pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpi2c1>; - pinctrl-1 = <&pinctrl_lpi2c1>; status = "okay"; tmp1075: temperature-sensor@4a { @@ -195,6 +203,7 @@ m24c64: eeprom@54 { eeprom@58 { compatible = "atmel,24c64d-wl"; reg = <0x58>; + pagesize = <32>; vcc-supply = <®_1v8>; }; @@ -202,6 +211,7 @@ eeprom@58 { eeprom@5c { compatible = "atmel,24c64d-wl"; reg = <0x5c>; + pagesize = <32>; vcc-supply = <®_1v8>; }; @@ -255,9 +265,11 @@ expander1: gpio@75 { /* I2C_CAM0 */ &lpi2c3 { clock-frequency = <400000>; - pinctrl-names = "default", "sleep"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_lpi2c3>; - pinctrl-1 = <&pinctrl_lpi2c3>; + pinctrl-1 = <&pinctrl_lpi2c3_gpio>; + sda-gpios = <&gpio2 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio2 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; dp_bridge: dp-bridge@f { @@ -292,21 +304,31 @@ dp_dsi_in: endpoint { /* I2C_CAM1 */ &lpi2c4 { clock-frequency = <400000>; - pinctrl-names = "default", "sleep"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_lpi2c4>; - pinctrl-1 = <&pinctrl_lpi2c4>; + pinctrl-1 = <&pinctrl_lpi2c4_gpio>; + sda-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio2 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; }; /* I2C_LCD */ &lpi2c6 { clock-frequency = <400000>; - pinctrl-names = "default", "sleep"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_lpi2c6>; - pinctrl-1 = <&pinctrl_lpi2c6>; + pinctrl-1 = <&pinctrl_lpi2c6_gpio>; + sda-gpios = <&gpio2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio2 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; }; +&lpspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi3>; + cs-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>, <&gpio2 7 GPIO_ACTIVE_LOW>; +}; + /* SER0 */ &lpuart1 { pinctrl-names = "default"; @@ -375,6 +397,63 @@ ethphy3: ethernet-phy@3 { }; }; +&pcie0 { + pinctrl-0 = <&pinctrl_pcie0>; + pinctrl-names = "default"; + clocks = <&scmi_clk IMX95_CLK_HSIO>, + <&scmi_clk IMX95_CLK_HSIOPLL>, + <&scmi_clk IMX95_CLK_HSIOPLL_VCO>, + <&scmi_clk IMX95_CLK_HSIOPCIEAUX>, + <&pcieclk 1>; + clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref"; + reset-gpios = <&expander2 9 GPIO_ACTIVE_LOW>; +}; + +&pcie1 { + pinctrl-0 = <&pinctrl_pcie1>; + pinctrl-names = "default"; + clocks = <&scmi_clk IMX95_CLK_HSIO>, + <&scmi_clk IMX95_CLK_HSIOPLL>, + <&scmi_clk IMX95_CLK_HSIOPLL_VCO>, + <&scmi_clk IMX95_CLK_HSIOPCIEAUX>, + <&pcieclk 0>; + clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref"; + reset-gpios = <&expander2 10 GPIO_ACTIVE_LOW>; +}; + +&sai3 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>, + <&scmi_clk IMX95_CLK_AUDIOPLL2>, + <&scmi_clk IMX95_CLK_SAI3>; + assigned-clock-parents = <0>, <0>, <0>, <0>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>; + assigned-clock-rates = <3932160000>, + <3612672000>, <393216000>, + <361267200>, <12288000>; + fsl,sai-mclk-direction-output; +}; + +&sai5 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai5>; + assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>, + <&scmi_clk IMX95_CLK_AUDIOPLL2>, + <&scmi_clk IMX95_CLK_SAI5>; + assigned-clock-parents = <0>, <0>, <0>, <0>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>; + assigned-clock-rates = <3932160000>, + <3612672000>, <393216000>, + <361267200>, <12288000>; +}; + &scmi_bbm { linux,code = ; }; @@ -425,11 +504,10 @@ &usb3_phy { }; &usdhc1 { - pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; pinctrl-2 = <&pinctrl_usdhc1_200mhz>; - pinctrl-3 = <&pinctrl_usdhc1>; bus-width = <8>; non-removable; no-sdio; @@ -437,6 +515,18 @@ &usdhc1 { status = "okay"; }; +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + vmmc-supply = <®_sdvmmc>; + cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + no-1-8-v; + disable-wp; + bus-width = <4>; +}; + &wdog3 { status = "okay"; }; @@ -497,12 +587,12 @@ pinctrl_flexcan3: flexcan3grp { }; pinctrl_flexspi1: flexspi1grp { - fsl,pins = , - , - , - , - , - ; + fsl,pins = , + , + , + , + , + ; }; pinctrl_gpio1: gpio1grp { @@ -527,14 +617,29 @@ pinctrl_lpi2c3: lpi2c3grp { ; }; + pinctrl_lpi2c3_gpio: lpi2c3-gpiogrp { + fsl,pins = , + ; + }; + pinctrl_lpi2c4: lpi2c4grp { - fsl,pins = , - ; + fsl,pins = , + ; + }; + + pinctrl_lpi2c4_gpio: lpi2c4-gpiogrp { + fsl,pins = , + ; }; pinctrl_lpi2c6: lpi2c6grp { - fsl,pins = , - ; + fsl,pins = , + ; + }; + + pinctrl_lpi2c6_gpio: lpi2c6-gpiogrp { + fsl,pins = , + ; }; pinctrl_lpspi3: lpspi3grp { @@ -617,7 +722,7 @@ pinctrl_tpm4: tpm4grp { fsl,pins = ; }; - pinctrl_tpm5: tpm4grp { + pinctrl_tpm5: tpm5grp { fsl,pins = ; }; diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi index 6da961eb3fe5cc..a4d85481755947 100644 --- a/arch/arm64/boot/dts/freescale/imx95.dtsi +++ b/arch/arm64/boot/dts/freescale/imx95.dtsi @@ -250,6 +250,28 @@ dummy: clock-dummy { clock-output-names = "dummy"; }; + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-hz-real = /bits/ 64 <500000000>; + opp-microvolt = <920000>; + }; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-hz-real = /bits/ 64 <800000000>; + opp-microvolt = <920000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-hz-real = /bits/ 64 <1000000000>; + opp-microvolt = <920000>; + }; + }; + clk_ext1: clock-ext1 { compatible = "fixed-clock"; #clock-cells = <0>; @@ -806,7 +828,7 @@ i3c2: i3c@42520000 { interrupts = ; #address-cells = <3>; #size-cells = <0>; - clocks = <&scmi_clk IMX95_CLK_BUSAON>, + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, <&scmi_clk IMX95_CLK_I3C2SLOW>; clock-names = "pclk", "fast_clk"; status = "disabled"; @@ -945,7 +967,7 @@ flexcan3: can@42600000 { }; flexspi1: spi@425e0000 { - compatible = "nxp,imx8mm-fspi"; + compatible = "nxp,imx95-fspi", "nxp,imx8mm-fspi"; reg = <0x425e0000 0x10000>, <0x28000000 0x8000000>; reg-names = "fspi_base", "fspi_mmap"; #address-cells = <1>; @@ -2139,6 +2161,21 @@ netc_emdio: mdio@0,0 { }; }; + gpu: gpu@4d900000 { + compatible = "nxp,imx95-mali", "arm,mali-valhall-csf"; + reg = <0 0x4d900000 0 0x480000>; + clocks = <&scmi_clk IMX95_CLK_GPU>, <&scmi_clk IMX95_CLK_GPUAPB>; + clock-names = "core", "coregroup"; + interrupts = , + , + ; + interrupt-names = "job", "mmu", "gpu"; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&scmi_devpd IMX95_PD_GPU>; + #cooling-cells = <2>; + dynamic-power-coefficient = <1013>; + }; + ddr-pmu@4e090dc0 { compatible = "fsl,imx95-ddr-pmu", "fsl,imx93-ddr-pmu"; reg = <0x0 0x4e090dc0 0x0 0x200>; diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi index 79daba930ad648..10d5c211b1c9b5 100644 --- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi +++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi @@ -141,6 +141,13 @@ sound: sound { model = "tqm-tlv320aic32"; ssi-controller = <&sai3>; audio-codec = <&tlv320aic3x04>; + audio-routing = + "IN3_L", "Mic Jack", + "Mic Jack", "Mic Bias", + "IN1_L", "Line In Jack", + "IN1_R", "Line In Jack", + "Line Out Jack", "LOL", + "Line Out Jack", "LOR"; }; }; @@ -185,7 +192,7 @@ ethphy0: ethernet-phy@e { reset-assert-us = <500000>; reset-deassert-us = <500>; interrupt-parent = <&expander2>; - interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; }; }; }; diff --git a/arch/arm64/boot/dts/freescale/mba8xx.dtsi b/arch/arm64/boot/dts/freescale/mba8xx.dtsi index c4b5663949ade6..f534dab44e8ed1 100644 --- a/arch/arm64/boot/dts/freescale/mba8xx.dtsi +++ b/arch/arm64/boot/dts/freescale/mba8xx.dtsi @@ -128,6 +128,13 @@ sound { model = "tqm-tlv320aic32"; audio-codec = <&tlv320aic3x04>; ssi-controller = <&sai1>; + audio-routing = + "IN3_L", "Mic Jack", + "Mic Jack", "Mic Bias", + "IN1_L", "Line In Jack", + "IN1_R", "Line In Jack", + "Line Out Jack", "LOL", + "Line Out Jack", "LOR"; }; }; diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi index d167624d1f0cb2..51d00dac12deb3 100644 --- a/arch/arm64/boot/dts/freescale/s32g2.dtsi +++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi @@ -3,7 +3,7 @@ * NXP S32G2 SoC family * * Copyright (c) 2021 SUSE LLC - * Copyright 2017-2021, 2024 NXP + * Copyright 2017-2021, 2024-2025 NXP */ #include @@ -727,6 +727,62 @@ usdhc0: mmc@402f0000 { status = "disabled"; }; + gmac0: ethernet@4033c000 { + compatible = "nxp,s32g2-dwmac"; + reg = <0x4033c000 0x2000>, /* gmac IP */ + <0x4007c004 0x4>; /* GMAC_0_CTRL_STS */ + interrupt-parent = <&gic>; + interrupts = ; + interrupt-names = "macirq"; + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + status = "disabled"; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <5>; + + queue0 { + }; + + queue1 { + }; + + queue2 { + }; + + queue3 { + }; + + queue4 { + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <5>; + + queue0 { + }; + + queue1 { + }; + + queue2 { + }; + + queue3 { + }; + + queue4 { + }; + }; + + gmac0mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + gic: interrupt-controller@50800000 { compatible = "arm,gic-v3"; reg = <0x50800000 0x10000>, diff --git a/arch/arm64/boot/dts/freescale/s32g274a-evb.dts b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts index c4a195dd67bf51..aa40a52f8e531b 100644 --- a/arch/arm64/boot/dts/freescale/s32g274a-evb.dts +++ b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* * Copyright (c) 2021 SUSE LLC - * Copyright 2019-2021, 2024 NXP + * Copyright 2019-2021, 2024-2025 NXP */ /dts-v1/; @@ -14,6 +14,7 @@ / { compatible = "nxp,s32g274a-evb", "nxp,s32g2"; aliases { + ethernet0 = &gmac0; serial0 = &uart0; }; @@ -43,3 +44,18 @@ &usdhc0 { no-1-8-v; status = "okay"; }; + +&gmac0 { + clocks = <&clks 24>, <&clks 19>, <&clks 18>, <&clks 15>; + clock-names = "stmmaceth", "tx", "rx", "ptp_ref"; + phy-mode = "rgmii-id"; + phy-handle = <&rgmiiaphy4>; + status = "okay"; +}; + +&gmac0mdio { + /* KSZ 9031 on RGMII */ + rgmiiaphy4: ethernet-phy@4 { + reg = <4>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts index 4f58be68c8182f..ee3121b192e53e 100644 --- a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts +++ b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts @@ -14,6 +14,7 @@ / { compatible = "nxp,s32g274a-rdb2", "nxp,s32g2"; aliases { + ethernet0 = &gmac0; serial0 = &uart0; serial1 = &uart1; }; @@ -77,3 +78,18 @@ &usdhc0 { no-1-8-v; status = "okay"; }; + +&gmac0 { + clocks = <&clks 24>, <&clks 19>, <&clks 18>, <&clks 15>; + clock-names = "stmmaceth", "tx", "rx", "ptp_ref"; + phy-mode = "rgmii-id"; + phy-handle = <&rgmiiaphy1>; + status = "okay"; +}; + +&gmac0mdio { + /* KSZ 9031 on RGMII */ + rgmiiaphy1: ethernet-phy@1 { + reg = <1>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/s32g3.dtsi b/arch/arm64/boot/dts/freescale/s32g3.dtsi index be3a582ebc1bf4..eff7673e7f3412 100644 --- a/arch/arm64/boot/dts/freescale/s32g3.dtsi +++ b/arch/arm64/boot/dts/freescale/s32g3.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* - * Copyright 2021-2024 NXP + * Copyright 2021-2025 NXP * * Authors: Ghennadi Procopciuc * Ciprian Costea @@ -804,6 +804,62 @@ usdhc0: mmc@402f0000 { status = "disabled"; }; + gmac0: ethernet@4033c000 { + compatible = "nxp,s32g2-dwmac"; + reg = <0x4033c000 0x2000>, /* gmac IP */ + <0x4007c004 0x4>; /* GMAC_0_CTRL_STS */ + interrupt-parent = <&gic>; + interrupts = ; + interrupt-names = "macirq"; + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + status = "disabled"; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <5>; + + queue0 { + }; + + queue1 { + }; + + queue2 { + }; + + queue3 { + }; + + queue4 { + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <5>; + + queue0 { + }; + + queue1 { + }; + + queue2 { + }; + + queue3 { + }; + + queue4 { + }; + }; + + gmac0mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + swt8: watchdog@40500000 { compatible = "nxp,s32g3-swt", "nxp,s32g2-swt"; reg = <40500000 0x1000>; diff --git a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts index e94f70ad82d978..326322b6219210 100644 --- a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts +++ b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* - * Copyright 2021-2024 NXP + * Copyright 2021-2025 NXP * * NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3) */ @@ -15,6 +15,7 @@ / { compatible = "nxp,s32g399a-rdb3", "nxp,s32g3"; aliases { + ethernet0 = &gmac0; mmc0 = &usdhc0; serial0 = &uart0; serial1 = &uart1; @@ -93,3 +94,18 @@ &usdhc0 { disable-wp; status = "okay"; }; + +&gmac0 { + clocks = <&clks 24>, <&clks 19>, <&clks 18>, <&clks 15>; + clock-names = "stmmaceth", "tx", "rx", "ptp_ref"; + phy-mode = "rgmii-id"; + phy-handle = <&rgmiiaphy1>; + status = "okay"; +}; + +&gmac0mdio { + /* KSZ 9031 on RGMII */ + rgmiiaphy1: ethernet-phy@1 { + reg = <1>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/tqma8xxs-mb-smarc-2.dtsi b/arch/arm64/boot/dts/freescale/tqma8xxs-mb-smarc-2.dtsi index 478cc8ede05ef9..3d20e3bf32ce7c 100644 --- a/arch/arm64/boot/dts/freescale/tqma8xxs-mb-smarc-2.dtsi +++ b/arch/arm64/boot/dts/freescale/tqma8xxs-mb-smarc-2.dtsi @@ -98,6 +98,13 @@ sound { model = "tqm-tlv320aic32"; ssi-controller = <&sai1>; audio-codec = <&tlv320aic3x04>; + audio-routing = + "IN3_L", "Mic Jack", + "Mic Jack", "Mic Bias", + "IN1_L", "Line In Jack", + "IN1_R", "Line In Jack", + "Line Out Jack", "LOL", + "Line Out Jack", "LOR"; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts index 3f13a960f34efd..ed84ab92fb19cb 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -675,10 +675,7 @@ &dwc3 { /* USB */ snps,lfps_filter_quirk; snps,dis_u2_susphy_quirk; snps,dis_u3_susphy_quirk; - snps,tx_de_emphasis_quirk; - snps,tx_de_emphasis = <1>; snps,dis_enblslpm_quirk; - snps,gctl-reset-quirk; usb-role-switch; role-switch-default-mode = "host"; port { diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile index 33f6d01266b1a4..a117268267ee06 100644 --- a/arch/arm64/boot/dts/intel/Makefile +++ b/arch/arm64/boot/dts/intel/Makefile @@ -2,7 +2,9 @@ dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_n6000.dtb \ socfpga_agilex_socdk.dtb \ socfpga_agilex_socdk_nand.dtb \ + socfpga_agilex3_socdk.dtb \ socfpga_agilex5_socdk.dtb \ + socfpga_agilex5_socdk_013b.dtb \ socfpga_agilex5_socdk_nand.dtb \ socfpga_n5x_socdk.dtb dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi index c1e66db0f4c524..0dfbafde882225 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi @@ -167,6 +167,7 @@ clkmgr: clock-controller@ffd10000 { compatible = "intel,agilex-clkmgr"; reg = <0xffd10000 0x1000>; #clock-cells = <1>; + clocks = <&osc1>; }; gmac0: ethernet@ff800000 { diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts new file mode 100644 index 00000000000000..14b299f19f3a5f --- /dev/null +++ b/arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2025, Altera Corporation + */ +#include "socfpga_agilex5.dtsi" + +/ { + model = "SoCFPGA Agilex3 SoCDK"; + compatible = "intel,socfpga-agilex3-socdk", "intel,socfpga-agilex3", + "intel,socfpga-agilex5"; + + aliases { + serial0 = &uart0; + ethernet2 = &gmac2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + /delete-node/ cpu@2; + /delete-node/ cpu@3; + }; + + leds { + compatible = "gpio-leds"; + + led0 { + label = "hps_led0"; + gpios = <&porta 1 GPIO_ACTIVE_HIGH>; + }; + + led1 { + label = "hps_led1"; + gpios = <&porta 12 GPIO_ACTIVE_HIGH>; + }; + + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0x0 0x80000000 0x0 0x0>; + }; +}; + +&gmac2 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <&emac2_phy0>; + max-frame-size = <9000>; + + mdio0 { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + emac2_phy0: ethernet-phy@0 { + reg = <0>; + rxc-skew-ps = <0>; + rxdv-skew-ps = <0>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + txc-skew-ps = <0>; + txen-skew-ps = <60>; + txd0-skew-ps = <60>; + txd1-skew-ps = <60>; + txd2-skew-ps = <60>; + txd3-skew-ps = <60>; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&osc1 { + clock-frequency = <25000000>; +}; + +&qspi { + status = "okay"; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <100000000>; + m25p,fast-read; + cdns,read-delay = <2>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + qspi_boot: partition@0 { + label = "u-boot"; + reg = <0x0 0x00c00000>; + }; + + root: partition@c00000 { + label = "root"; + reg = <0x00c00000 0x03400000>; + }; + }; + }; +}; + +&smmu { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi index 04e99cd7e74b6d..a5c2025a616e89 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi @@ -37,6 +37,7 @@ cpu0: cpu@0 { reg = <0x0>; device_type = "cpu"; enable-method = "psci"; + next-level-cache = <&L2>; }; cpu1: cpu@1 { @@ -44,6 +45,7 @@ cpu1: cpu@1 { reg = <0x100>; device_type = "cpu"; enable-method = "psci"; + next-level-cache = <&L2>; }; cpu2: cpu@2 { @@ -51,6 +53,7 @@ cpu2: cpu@2 { reg = <0x200>; device_type = "cpu"; enable-method = "psci"; + next-level-cache = <&L2>; }; cpu3: cpu@3 { @@ -58,6 +61,30 @@ cpu3: cpu@3 { reg = <0x300>; device_type = "cpu"; enable-method = "psci"; + next-level-cache = <&L2>; + }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + next-level-cache = <&L3>; + cache-unified; + }; + + L3: l3-cache { + compatible = "cache"; + cache-level = <3>; + cache-unified; + }; + + }; + + firmware { + svc { + compatible = "intel,agilex5-svc"; + method = "smc"; + memory-region = <&service_reserved>; + iommus = <&smmu 10>; }; }; @@ -75,8 +102,11 @@ intc: interrupt-controller@1d000000 { #address-cells = <2>; #size-cells = <2>; interrupt-controller; + interrupt-parent = <&intc>; #redistributor-regions = <1>; redistributor-stride = <0x0 0x20000>; + /* VGIC maintenance interrupt */ + interrupts = ; its: msi-controller@1d040000 { compatible = "arm,gic-v3-its"; @@ -133,6 +163,12 @@ usbphy0: usbphy { compatible = "usb-nop-xceiv"; }; + pmu0: pmu { + compatible = "arm,armv8-pmuv3"; + interrupt-parent = <&intc>; + interrupts = ; + }; + soc: soc@0 { compatible = "simple-bus"; ranges = <0 0 0 0xffffffff>; @@ -203,7 +239,8 @@ i2c4: i2c@10c02c00 { }; i3c0: i3c@10da0000 { - compatible = "snps,dw-i3c-master-1.00a"; + compatible = "altr,agilex5-dw-i3c-master", + "snps,dw-i3c-master-1.00a"; reg = <0x10da0000 0x1000>; #address-cells = <3>; #size-cells = <0>; @@ -213,7 +250,8 @@ i3c0: i3c@10da0000 { }; i3c1: i3c@10da1000 { - compatible = "snps,dw-i3c-master-1.00a"; + compatible = "altr,agilex5-dw-i3c-master", + "snps,dw-i3c-master-1.00a"; reg = <0x10da1000 0x1000>; #address-cells = <3>; #size-cells = <0>; @@ -271,7 +309,9 @@ nand: nand-controller@10b80000 { #size-cells = <0>; interrupts = ; clocks = <&clkmgr AGILEX5_NAND_NF_CLK>; + clock-names = "nf_clk"; cdns,board-delay-ps = <4830>; + iommus = <&smmu 4>; status = "disabled"; }; @@ -298,6 +338,7 @@ dmac0: dma-controller@10db0000 { snps,block-size = <32767 32767 32767 32767>; snps,priority = <0 1 2 3>; snps,axi-max-burst-len = <8>; + iommus = <&smmu 8>; }; dmac1: dma-controller@10dc0000 { @@ -315,6 +356,7 @@ dmac1: dma-controller@10dc0000 { snps,block-size = <32767 32767 32767 32767>; snps,priority = <0 1 2 3>; snps,axi-max-burst-len = <8>; + iommus = <&smmu 9>; }; rst: rstmgr@10d11000 { @@ -323,6 +365,18 @@ rst: rstmgr@10d11000 { #reset-cells = <1>; }; + smmu: iommu@16000000 { + compatible = "arm,smmu-v3"; + reg = <0x16000000 0x30000>; + interrupts = , + , + ; + interrupt-names = "eventq", "gerror", "priq"; + dma-coherent; + #iommu-cells = <1>; + status = "disabled"; + }; + spi0: spi@10da4000 { compatible = "snps,dw-apb-ssi"; reg = <0x10da4000 0x1000>; @@ -423,6 +477,7 @@ usb0: usb@10b00000 { phy-names = "usb2-phy"; resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>; reset-names = "dwc2", "dwc2-ecc"; + iommus = <&smmu 6>; clocks = <&clkmgr AGILEX5_USB2OTG_HCLK>; clock-names = "otg"; status = "disabled"; @@ -822,5 +877,61 @@ queue7 { }; }; }; + + pmu0_tcu: pmu@16002000 { + compatible = "arm,smmu-v3-pmcg"; + reg = <0x16002000 0x1000>, + <0x16022000 0x1000>; + interrupt-parent = <&intc>; + interrupts = ; + }; + + pmu0_tbu0: pmu@16042000 { + compatible = "arm,smmu-v3-pmcg"; + reg = <0x16042000 0x1000>, + <0x16052000 0x1000>; + interrupt-parent = <&intc>; + interrupts = ; + }; + + pmu0_tbu1: pmu@16062000 { + compatible = "arm,smmu-v3-pmcg"; + reg = <0x16062000 0x1000>, + <0x16072000 0x1000>; + interrupt-parent = <&intc>; + interrupts = ; + }; + + pmu0_tbu2: pmu@16082000 { + compatible = "arm,smmu-v3-pmcg"; + reg = <0x16082000 0x1000>, + <0x16092000 0x1000>; + interrupt-parent = <&intc>; + interrupts = ; + }; + + pmu0_tbu3: pmu@160a2000 { + compatible = "arm,smmu-v3-pmcg"; + reg = <0x160A2000 0x1000>, + <0x160B2000 0x1000>; + interrupt-parent = <&intc>; + interrupts = ; + }; + + pmu0_tbu4: pmu@160c2000 { + compatible = "arm,smmu-v3-pmcg"; + reg = <0x160C2000 0x1000>, + <0x160D2000 0x1000>; + interrupt-parent = <&intc>; + interrupts = ; + }; + + pmu0_tbu5: pmu@160e2000 { + compatible = "arm,smmu-v3-pmcg"; + reg = <0x160E2000 0x1000>, + <0x160F2000 0x1000>; + interrupt-parent = <&intc>; + interrupts = ; + }; }; }; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts index e9776e1cdc9a00..262bb3e8e5c724 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts +++ b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts @@ -77,6 +77,8 @@ flash@0 { cdns,tsd2d-ns = <50>; cdns,tchsh-ns = <4>; cdns,tslch-ns = <4>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; partitions { compatible = "fixed-partitions"; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_013b.dts b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_013b.dts new file mode 100644 index 00000000000000..f71e1280c7788c --- /dev/null +++ b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_013b.dts @@ -0,0 +1,126 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2025, Altera Corporation + */ +#include "socfpga_agilex5.dtsi" + +/ { + model = "SoCFPGA Agilex5 013B SoCDK"; + compatible = "intel,socfpga-agilex5-socdk-013b", "intel,socfpga-agilex5"; + + aliases { + serial0 = &uart0; + ethernet2 = &gmac2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led0 { + label = "hps_led0"; + gpios = <&porta 1 GPIO_ACTIVE_HIGH>; + }; + + led1 { + label = "hps_led1"; + gpios = <&porta 12 GPIO_ACTIVE_HIGH>; + }; + + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0x0 0x80000000 0x0 0x0>; + }; +}; + +&gmac2 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <&emac2_phy0>; + max-frame-size = <9000>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + emac2_phy0: ethernet-phy@0 { + reg = <0>; + rxc-skew-ps = <0>; + rxdv-skew-ps = <0>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + txc-skew-ps = <0>; + txen-skew-ps = <60>; + txd0-skew-ps = <60>; + txd1-skew-ps = <60>; + txd2-skew-ps = <60>; + txd3-skew-ps = <60>; + }; + }; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&osc1 { + clock-frequency = <25000000>; +}; + +&qspi { + status = "okay"; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <100000000>; + m25p,fast-read; + cdns,read-delay = <2>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + qspi_boot: partition@0 { + label = "u-boot"; + reg = <0x0 0x00c00000>; + }; + + root: partition@c00000 { + label = "root"; + reg = <0x00c00000 0x03400000>; + }; + }; + }; +}; + +&smmu { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_nand.dts b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_nand.dts index 38a582ef86b42c..ec4541d44c9bc0 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_nand.dts +++ b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_nand.dts @@ -10,6 +10,7 @@ / { aliases { serial0 = &uart0; + ethernet0 = &gmac0; }; chosen { @@ -36,6 +37,23 @@ memory@80000000 { }; }; +&gmac0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <&emac0_phy0>; + max-frame-size = <9000>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + emac0_phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + &gpio0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts index b31cfa6b802d9f..9ee312bae8d27d 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts +++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts @@ -116,6 +116,8 @@ flash@0 { cdns,tsd2d-ns = <50>; cdns,tchsh-ns = <4>; cdns,tslch-ns = <4>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; partitions { compatible = "fixed-partitions"; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts index 0f9020bd0c52a5..98900cb410dc50 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts +++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts @@ -81,7 +81,7 @@ phy0: ethernet-phy@0 { &nand { status = "okay"; - flash@0 { + nand@0 { #address-cells = <1>; #size-cells = <1>; reg = <0>; diff --git a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts index 7952c7f47cc2f8..0034a489722092 100644 --- a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts +++ b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts @@ -93,6 +93,8 @@ flash@0 { cdns,tsd2d-ns = <50>; cdns,tchsh-ns = <4>; cdns,tslch-ns = <4>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; partitions { compatible = "fixed-partitions"; diff --git a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi index 293403a1a333c7..df939426d25837 100644 --- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi @@ -56,7 +56,7 @@ nand_pins: nand-pins { marvell,function = "dev"; }; - nand_rb: nand-rb { + nand_rb: nand-rb-pins { marvell,pins = "mpp13"; marvell,function = "nf"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi index ee67c70bf02efc..fb361d657a779f 100644 --- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi @@ -89,7 +89,7 @@ nand_pins: nand-pins { marvell,function = "dev"; }; - nand_rb: nand-rb { + nand_rb: nand-rb-pins { marvell,pins = "mpp13", "mpp12"; marvell,function = "nf"; }; diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi index 50e9e072482892..3cc320f569add5 100644 --- a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi +++ b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi @@ -379,7 +379,7 @@ nand_pins: nand-pins { "mpp27"; marvell,function = "dev"; }; - nand_rb: nand-rb { + nand_rb: nand-rb-pins { marvell,pins = "mpp13"; marvell,function = "nf"; }; diff --git a/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts b/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts index 5cf83d8ca1f598..2507896d58f9b6 100644 --- a/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts +++ b/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts @@ -413,13 +413,7 @@ fixed-link { /* SRDS #0,#1,#2,#3 - PCIe */ &cp0_pcie0 { num-lanes = <4>; - /* - * The mvebu-comphy driver does not currently know how to pass correct - * lane-count to ATF while configuring the serdes lanes. - * Rely on bootloader configuration only. - * - * phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, <&cp0_comphy2 0>, <&cp0_comphy3 0>; - */ + phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, <&cp0_comphy2 0>, <&cp0_comphy3 0>; status = "okay"; }; @@ -481,13 +475,7 @@ &cp1_eth0 { /* SRDS #0,#1 - PCIe */ &cp1_pcie0 { num-lanes = <2>; - /* - * The mvebu-comphy driver does not currently know how to pass correct - * lane-count to ATF while configuring the serdes lanes. - * Rely on bootloader configuration only. - * - * phys = <&cp1_comphy0 0>, <&cp1_comphy1 0>; - */ + phys = <&cp1_comphy0 0>, <&cp1_comphy1 0>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts b/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts index 47a4f01a7077bf..b2ce5edd9c6ac6 100644 --- a/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts +++ b/arch/arm64/boot/dts/marvell/mmp/pxa1908-samsung-coreprimevelte.dts @@ -10,6 +10,7 @@ / { aliases { mmc0 = &sdh2; /* eMMC */ mmc1 = &sdh0; /* SD card */ + mmc2 = &sdh1; /* SDIO */ serial0 = &uart0; }; @@ -23,6 +24,7 @@ chosen { fb0: framebuffer@17177000 { compatible = "simple-framebuffer"; reg = <0 0x17177000 0 (480 * 800 * 4)>; + power-domains = <&apmu PXA1908_POWER_DOMAIN_DSI>; width = <480>; height = <800>; stride = <(480 * 4)>; @@ -30,46 +32,26 @@ fb0: framebuffer@17177000 { }; }; - /* Bootloader fills this in */ memory@0 { device_type = "memory"; - reg = <0 0 0 0>; + reg = <0 0 0 0x40000000>; }; reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; + /* + * Reserved by the vendor bootloader as a "secure region". + * + * TODO: See if the responsible stage of the bootloader can be + * replaced + */ + secure-region@0 { + reg = <0 0 0 0x1000000>; + }; framebuffer@17000000 { reg = <0 0x17000000 0 0x1800000>; no-map; }; - - gpu@9000000 { - reg = <0 0x9000000 0 0x1000000>; - }; - - /* Communications processor, aka modem */ - cp@5000000 { - reg = <0 0x5000000 0 0x3000000>; - }; - - cm3@a000000 { - reg = <0 0xa000000 0 0x80000>; - }; - - seclog@8000000 { - reg = <0 0x8000000 0 0x100000>; - }; - - ramoops@8100000 { - compatible = "ramoops"; - reg = <0 0x8100000 0 0x40000>; - record-size = <0x8000>; - console-size = <0x20000>; - max-reason = <5>; - }; }; i2c-muic { @@ -88,6 +70,12 @@ muic: extcon@14 { reg = <0x14>; interrupt-parent = <&gpio>; interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + + usb_con: connector { + compatible = "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + }; }; }; @@ -115,6 +103,21 @@ key-voldown { gpios = <&gpio 17 GPIO_ACTIVE_LOW>; }; }; + + backlight { + compatible = "kinetic,ktd2801"; + ctrl-gpios = <&gpio 97 GPIO_ACTIVE_HIGH>; + max-brightness = <210>; + }; + + vibrator { + compatible = "pwm-vibrator"; + pwm-names = "enable"; + pwms = <&pwm3 100000>; + enable-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_pin>; + }; }; &smmu { @@ -286,6 +289,151 @@ sdh0_pins_2: sdh0-pins-2 { pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; pinctrl-single,low-power-mode = <0x208 0x388>; }; + + sdh1_pins_0: sdh1-pins-0 { + pinctrl-single,pins = < + 0x170 1 + 0x174 1 + 0x178 1 + 0x17c 1 + 0x180 1 + >; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + sdh1_pins_1: sdh1-pins-1 { + pinctrl-single,pins = <0x184 1>; + pinctrl-single,drive-strength = <0 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0x208 0x388>; + }; + + sdh1_pins_2: sdh1-pins-2 { + pinctrl-single,pins = <0xec 0>; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0x8000 0x8000 0 0xc000>; + pinctrl-single,bias-pulldown = <0x8000 0x8000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + sdh1_fast_pins_0: sdh1-fast-pins-0 { + pinctrl-single,pins = < + 0x170 1 + 0x174 1 + 0x178 1 + 0x17c 1 + 0x180 1 + >; + pinctrl-single,drive-strength = <0x1800 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + sdh1_fast_pins_1: sdh1-fast-pins-1 { + pinctrl-single,pins = <0x184 1>; + pinctrl-single,drive-strength = <0x1800 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0x208 0x388>; + }; + + sdh2_pins_0: sdh2-pins-0 { + pinctrl-single,pins = < + 0x24 1 + 0x28 1 + 0x2c 1 + 0x30 1 + 0x34 1 + 0x38 1 + 0x3c 1 + 0x40 1 + >; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + sdh2_pins_1: sdh2-pins-1 { + pinctrl-single,pins = <0x64 1>; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0x208 0x388>; + }; + + sdh2_pins_2: sdh2-pins-2 { + pinctrl-single,pins = <0x5c 1>; + pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>; + pinctrl-single,low-power-mode = <0x288 0x388>; + }; + + sdh2_fast_pins_0: sdh2-fast-pins-0 { + pinctrl-single,pins = < + 0x24 1 + 0x28 1 + 0x2c 1 + 0x30 1 + 0x34 1 + 0x38 1 + 0x3c 1 + 0x40 1 + >; + pinctrl-single,drive-strength = <0x1800 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; + + sdh2_fast_pins_1: sdh2-fast-pins-1 { + pinctrl-single,pins = <0x64 1>; + pinctrl-single,drive-strength = <0x1800 0x1800>; + pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0x208 0x388>; + }; + + sdh2_fast_pins_2: sdh2-fast-pins-2 { + pinctrl-single,pins = <0x5c 1>; + pinctrl-single,drive-strength = <0x1800 0x1800>; + pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>; + pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>; + pinctrl-single,low-power-mode = <0x288 0x388>; + }; + + vibrator_pin: vibrator-pin { + pinctrl-single,pins = <0x12c 0>; + pinctrl-single,drive-strength = <0x1000 0x1800>; + pinctrl-single,bias-pullup = <0x8000 0xc000 0x8000 0xc000>; + pinctrl-single,bias-pulldown = <0xa000 0xa000 0 0xa000>; + pinctrl-single,input-schmitt = <0 0x30>; + pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>; + pinctrl-single,low-power-mode = <0 0x388>; + }; }; &uart0 { @@ -303,10 +451,46 @@ &twsi1 { &twsi2 { status = "okay"; + + pmic@30 { + compatible = "marvell,88pm886-a1"; + reg = <0x30>; + interrupts = ; + wakeup-source; + + regulators { + ldo2: ldo2 { + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <3100000>; + }; + + ldo6: ldo6 { + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + + ldo14: ldo14 { + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; }; &twsi3 { status = "okay"; + + touchscreen@50 { + compatible = "imagis,ist3032c"; + reg = <0x50>; + interrupt-parent = <&gpio>; + interrupts = <72 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&ldo2>; + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + }; }; &usb { @@ -314,18 +498,33 @@ &usb { }; &sdh2 { - /* Disabled for now because initialization fails with -ETIMEDOUT. */ - status = "disabled"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&sdh2_pins_0 &sdh2_pins_1 &sdh2_pins_2>; + pinctrl-1 = <&sdh2_fast_pins_0 &sdh2_fast_pins_1 &sdh2_fast_pins_2>; bus-width = <8>; non-removable; mmc-ddr-1_8v; + mmc-hs200-1_8v; }; &sdh0 { pinctrl-names = "default"; pinctrl-0 = <&sdh0_pins_0 &sdh0_pins_1 &sdh0_pins_2>; - cd-gpios = <&gpio 11 0>; - cd-inverted; + cd-gpios = <&gpio 11 GPIO_ACTIVE_LOW>; bus-width = <4>; wp-inverted; + vmmc-supply = <&ldo14>; + vqmmc-supply = <&ldo6>; +}; + +&sdh1 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&sdh1_pins_0 &sdh1_pins_1 &sdh1_pins_2>; + pinctrl-1 = <&sdh1_fast_pins_0 &sdh1_fast_pins_1 &sdh1_pins_2>; + bus-width = <4>; + non-removable; +}; + +&pwm3 { + status = "okay"; }; diff --git a/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi b/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi index cf2b9109688ce5..5778bfdb85675e 100644 --- a/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi +++ b/arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi @@ -3,6 +3,7 @@ #include #include +#include / { model = "Marvell Armada PXA1908"; @@ -58,6 +59,20 @@ psci { method = "smc"; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops@8100000 { + compatible = "ramoops"; + reg = <0 0x8100000 0 0x40000>; + record-size = <0x8000>; + console-size = <0x20000>; + max-reason = <5>; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = , @@ -79,6 +94,7 @@ smmu: iommu@c0010000 { #iommu-cells = <1>; interrupts = , ; + power-domains = <&apmu PXA1908_POWER_DOMAIN_VPU>; status = "disabled"; }; @@ -195,6 +211,38 @@ gpio@100 { }; }; + pwm0: pwm@1a000 { + compatible = "marvell,pxa250-pwm"; + reg = <0x1a000 0x10>; + clocks = <&apbc PXA1908_CLK_PWM0>; + #pwm-cells = <1>; + status = "disabled"; + }; + + pwm1: pwm@1a400 { + compatible = "marvell,pxa250-pwm"; + reg = <0x1a400 0x10>; + clocks = <&apbc PXA1908_CLK_PWM1>; + #pwm-cells = <1>; + status = "disabled"; + }; + + pwm2: pwm@1a800 { + compatible = "marvell,pxa250-pwm"; + reg = <0x1a800 0x10>; + clocks = <&apbc PXA1908_CLK_PWM2>; + #pwm-cells = <1>; + status = "disabled"; + }; + + pwm3: pwm@1ac00 { + compatible = "marvell,pxa250-pwm"; + reg = <0x1ac00 0x10>; + clocks = <&apbc PXA1908_CLK_PWM3>; + #pwm-cells = <1>; + status = "disabled"; + }; + pmx: pinmux@1e000 { compatible = "marvell,pxa1908-padconf", "pinconf-single"; reg = <0x1e000 0x330>; @@ -291,9 +339,10 @@ sdh2: mmc@81000 { }; apmu: clock-controller@82800 { - compatible = "marvell,pxa1908-apmu"; + compatible = "marvell,pxa1908-apmu", "syscon"; reg = <0x82800 0x400>; #clock-cells = <1>; + #power-domain-cells = <1>; }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index a4df4c21399eef..3f76d9ce987975 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -19,12 +19,71 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nand.dtbo dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nor.dtbo dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sata.dtbo dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd.dtbo +mt7986a-bananapi-bpi-r3-emmc-nand-dtbs := \ + mt7986a-bananapi-bpi-r3.dtb \ + mt7986a-bananapi-bpi-r3-emmc.dtbo \ + mt7986a-bananapi-bpi-r3-nand.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc-nand.dtb +mt7986a-bananapi-bpi-r3-emmc-nor-dtbs := \ + mt7986a-bananapi-bpi-r3.dtb \ + mt7986a-bananapi-bpi-r3-emmc.dtbo \ + mt7986a-bananapi-bpi-r3-nor.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc-nor.dtb +mt7986a-bananapi-bpi-r3-sd-nand-dtbs := \ + mt7986a-bananapi-bpi-r3.dtb \ + mt7986a-bananapi-bpi-r3-sd.dtbo \ + mt7986a-bananapi-bpi-r3-nand.dtbo \ + mt7986a-bananapi-bpi-r3-sata.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd-nand.dtb +mt7986a-bananapi-bpi-r3-sd-nor-dtbs := \ + mt7986a-bananapi-bpi-r3.dtb \ + mt7986a-bananapi-bpi-r3-sd.dtbo \ + mt7986a-bananapi-bpi-r3-nor.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd-nor.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-2g5.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-emmc.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-4e.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-8x.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-cn15.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-cn18.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-emmc.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-sd.dtbo dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-sd.dtbo +mt7988a-bananapi-bpi-r4-emmc-dtbs := \ + mt7988a-bananapi-bpi-r4.dtb \ + mt7988a-bananapi-bpi-r4-emmc.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-emmc.dtb +mt7988a-bananapi-bpi-r4-sd-dtbs := \ + mt7988a-bananapi-bpi-r4.dtb \ + mt7988a-bananapi-bpi-r4-sd.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-sd.dtb +mt7988a-bananapi-bpi-r4-2g5-emmc-dtbs := \ + mt7988a-bananapi-bpi-r4-2g5.dtb \ + mt7988a-bananapi-bpi-r4-emmc.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-2g5-emmc.dtb +mt7988a-bananapi-bpi-r4-2g5-sd-dtbs := \ + mt7988a-bananapi-bpi-r4-2g5.dtb \ + mt7988a-bananapi-bpi-r4-sd.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-2g5-sd.dtb +mt7988a-bananapi-bpi-r4-pro-8x-emmc-dtbs := \ + mt7988a-bananapi-bpi-r4-pro-8x.dtb \ + mt7988a-bananapi-bpi-r4-pro-emmc.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-8x-emmc.dtb +mt7988a-bananapi-bpi-r4-pro-8x-sd-dtbs := \ + mt7988a-bananapi-bpi-r4-pro-8x.dtb \ + mt7988a-bananapi-bpi-r4-pro-sd.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-8x-sd.dtb +mt7988a-bananapi-bpi-r4-pro-8x-sd-cn15-dtbs := \ + mt7988a-bananapi-bpi-r4-pro-8x-sd.dtb \ + mt7988a-bananapi-bpi-r4-pro-cn15.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-8x-sd-cn15.dtb +mt7988a-bananapi-bpi-r4-pro-8x-sd-cn18-dtbs := \ + mt7988a-bananapi-bpi-r4-pro-8x-sd.dtb \ + mt7988a-bananapi-bpi-r4-pro-cn18.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4-pro-8x-sd-cn18.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb @@ -99,11 +158,16 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8370-genio-510-evk.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8370-grinn-genio-510-sbc.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-genio-1200-evk.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-genio-1200-evk-ufs.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8390-genio-700-evk.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8390-grinn-genio-700-sbc.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-kontron-3-5-sbc-i1200.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-radxa-nio-12l.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-radxa-nio-12l-8-hd-panel.dtbo +mt8395-radxa-nio-12l-8-hd-panel-dtbs := mt8395-radxa-nio-12l.dtb mt8395-radxa-nio-12l-8-hd-panel.dtbo +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8395-radxa-nio-12l-8-hd-panel.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb # Device tree overlays support @@ -111,4 +175,6 @@ DTC_FLAGS_mt7986a-bananapi-bpi-r3 := -@ DTC_FLAGS_mt7986a-bananapi-bpi-r3-mini := -@ DTC_FLAGS_mt7988a-bananapi-bpi-r4 := -@ DTC_FLAGS_mt7988a-bananapi-bpi-r4-2g5 := -@ +DTC_FLAGS_mt7988a-bananapi-bpi-r4-pro-4e := -@ +DTC_FLAGS_mt7988a-bananapi-bpi-r4-pro-8x := -@ DTC_FLAGS_mt8395-radxa-nio-12l := -@ diff --git a/arch/arm64/boot/dts/mediatek/mt6878-pinfunc.h b/arch/arm64/boot/dts/mediatek/mt6878-pinfunc.h new file mode 100644 index 00000000000000..4e8e475a74549b --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt6878-pinfunc.h @@ -0,0 +1,1201 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2023 MediaTek Inc. + * Author: Light Hsieh + * + * Copyright (C) 2025 Igor Belwon + */ + +#ifndef __MT6878_PINFUNC_H +#define __MT6878_PINFUNC_H + +#include "mt65xx.h" + +#define PINMUX_GPIO0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0) +#define PINMUX_GPIO0__FUNC_TP_GPIO0_AO (MTK_PIN_NO(0) | 1) +#define PINMUX_GPIO0__FUNC_SRCLKENA1 (MTK_PIN_NO(0) | 2) +#define PINMUX_GPIO0__FUNC_DBG_MON_A3 (MTK_PIN_NO(0) | 7) + +#define PINMUX_GPIO1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0) +#define PINMUX_GPIO1__FUNC_TP_GPIO1_AO (MTK_PIN_NO(1) | 1) +#define PINMUX_GPIO1__FUNC_SRCLKENA1 (MTK_PIN_NO(1) | 2) +#define PINMUX_GPIO1__FUNC_SRCLKENA2 (MTK_PIN_NO(1) | 3) +#define PINMUX_GPIO1__FUNC_IDDIG (MTK_PIN_NO(1) | 5) +#define PINMUX_GPIO1__FUNC_DBG_MON_A4 (MTK_PIN_NO(1) | 7) + +#define PINMUX_GPIO2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0) +#define PINMUX_GPIO2__FUNC_TP_GPIO2_AO (MTK_PIN_NO(2) | 1) +#define PINMUX_GPIO2__FUNC_SRCLKENAI0 (MTK_PIN_NO(2) | 2) +#define PINMUX_GPIO2__FUNC_SCP_DMIC_CLK (MTK_PIN_NO(2) | 4) +#define PINMUX_GPIO2__FUNC_DMIC_CLK (MTK_PIN_NO(2) | 5) +#define PINMUX_GPIO2__FUNC_DBG_MON_A5 (MTK_PIN_NO(2) | 7) + +#define PINMUX_GPIO3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0) +#define PINMUX_GPIO3__FUNC_TP_GPIO3_AO (MTK_PIN_NO(3) | 1) +#define PINMUX_GPIO3__FUNC_SRCLKENAI1 (MTK_PIN_NO(3) | 2) +#define PINMUX_GPIO3__FUNC_SCP_DMIC_DAT (MTK_PIN_NO(3) | 4) +#define PINMUX_GPIO3__FUNC_DMIC_DAT (MTK_PIN_NO(3) | 5) +#define PINMUX_GPIO3__FUNC_DBG_MON_A6 (MTK_PIN_NO(3) | 7) + +#define PINMUX_GPIO4__FUNC_GPIO4 (MTK_PIN_NO(4) | 0) +#define PINMUX_GPIO4__FUNC_SPI7_CLK (MTK_PIN_NO(4) | 1) +#define PINMUX_GPIO4__FUNC_TP_GPIO4_AO (MTK_PIN_NO(4) | 2) +#define PINMUX_GPIO4__FUNC_ANT_SEL0 (MTK_PIN_NO(4) | 3) +#define PINMUX_GPIO4__FUNC_DMIC1_CLK (MTK_PIN_NO(4) | 5) +#define PINMUX_GPIO4__FUNC_MD_INT4 (MTK_PIN_NO(4) | 6) +#define PINMUX_GPIO4__FUNC_DBG_MON_A7 (MTK_PIN_NO(4) | 7) + +#define PINMUX_GPIO5__FUNC_GPIO5 (MTK_PIN_NO(5) | 0) +#define PINMUX_GPIO5__FUNC_SPI7_CSB (MTK_PIN_NO(5) | 1) +#define PINMUX_GPIO5__FUNC_TP_GPIO5_AO (MTK_PIN_NO(5) | 2) +#define PINMUX_GPIO5__FUNC_ANT_SEL1 (MTK_PIN_NO(5) | 3) +#define PINMUX_GPIO5__FUNC_DMIC1_DAT (MTK_PIN_NO(5) | 5) +#define PINMUX_GPIO5__FUNC_MD_INT0 (MTK_PIN_NO(5) | 6) +#define PINMUX_GPIO5__FUNC_DBG_MON_A8 (MTK_PIN_NO(5) | 7) + +#define PINMUX_GPIO6__FUNC_GPIO6 (MTK_PIN_NO(6) | 0) +#define PINMUX_GPIO6__FUNC_SPI7_MO (MTK_PIN_NO(6) | 1) +#define PINMUX_GPIO6__FUNC_TP_GPIO6_AO (MTK_PIN_NO(6) | 2) +#define PINMUX_GPIO6__FUNC_ANT_SEL2 (MTK_PIN_NO(6) | 3) +#define PINMUX_GPIO6__FUNC_MD32_0_GPIO0 (MTK_PIN_NO(6) | 4) +#define PINMUX_GPIO6__FUNC_MD_INT3 (MTK_PIN_NO(6) | 6) +#define PINMUX_GPIO6__FUNC_DBG_MON_B0 (MTK_PIN_NO(6) | 7) + +#define PINMUX_GPIO7__FUNC_GPIO7 (MTK_PIN_NO(7) | 0) +#define PINMUX_GPIO7__FUNC_SPI7_MI (MTK_PIN_NO(7) | 1) +#define PINMUX_GPIO7__FUNC_TP_GPIO7_AO (MTK_PIN_NO(7) | 2) +#define PINMUX_GPIO7__FUNC_ANT_SEL3 (MTK_PIN_NO(7) | 3) +#define PINMUX_GPIO7__FUNC_MD32_1_GPIO0 (MTK_PIN_NO(7) | 4) + +#define PINMUX_GPIO8__FUNC_GPIO8 (MTK_PIN_NO(8) | 0) +#define PINMUX_GPIO8__FUNC_SCP_JTAG0_TRSTN_VLP (MTK_PIN_NO(8) | 2) +#define PINMUX_GPIO8__FUNC_SPM_JTAG_TRSTN_VLP (MTK_PIN_NO(8) | 3) +#define PINMUX_GPIO8__FUNC_SSPM_JTAG_TRSTN_VLP (MTK_PIN_NO(8) | 4) +#define PINMUX_GPIO8__FUNC_HFRP_JTAG0_TRSTN (MTK_PIN_NO(8) | 5) +#define PINMUX_GPIO8__FUNC_IO_JTAG_TRSTN (MTK_PIN_NO(8) | 6) +#define PINMUX_GPIO8__FUNC_CONN_BGF_MCU_TDI (MTK_PIN_NO(8) | 7) + +#define PINMUX_GPIO9__FUNC_GPIO9 (MTK_PIN_NO(9) | 0) +#define PINMUX_GPIO9__FUNC_SCP_JTAG0_TCK_VLP (MTK_PIN_NO(9) | 2) +#define PINMUX_GPIO9__FUNC_SPM_JTAG_TCK_VLP (MTK_PIN_NO(9) | 3) +#define PINMUX_GPIO9__FUNC_SSPM_JTAG_TCK_VLP (MTK_PIN_NO(9) | 4) +#define PINMUX_GPIO9__FUNC_HFRP_JTAG0_TCK (MTK_PIN_NO(9) | 5) +#define PINMUX_GPIO9__FUNC_IO_JTAG_TCK (MTK_PIN_NO(9) | 6) +#define PINMUX_GPIO9__FUNC_CONN_BGF_MCU_TRST_B (MTK_PIN_NO(9) | 7) + +#define PINMUX_GPIO10__FUNC_GPIO10 (MTK_PIN_NO(10) | 0) +#define PINMUX_GPIO10__FUNC_SCP_JTAG0_TMS_VLP (MTK_PIN_NO(10) | 2) +#define PINMUX_GPIO10__FUNC_SPM_JTAG_TMS_VLP (MTK_PIN_NO(10) | 3) +#define PINMUX_GPIO10__FUNC_SSPM_JTAG_TMS_VLP (MTK_PIN_NO(10) | 4) +#define PINMUX_GPIO10__FUNC_HFRP_JTAG0_TMS (MTK_PIN_NO(10) | 5) +#define PINMUX_GPIO10__FUNC_IO_JTAG_TMS (MTK_PIN_NO(10) | 6) +#define PINMUX_GPIO10__FUNC_CONN_BGF_MCU_TCK (MTK_PIN_NO(10) | 7) + +#define PINMUX_GPIO11__FUNC_GPIO11 (MTK_PIN_NO(11) | 0) +#define PINMUX_GPIO11__FUNC_SCP_JTAG0_TDI_VLP (MTK_PIN_NO(11) | 2) +#define PINMUX_GPIO11__FUNC_SPM_JTAG_TDI_VLP (MTK_PIN_NO(11) | 3) +#define PINMUX_GPIO11__FUNC_SSPM_JTAG_TDI_VLP (MTK_PIN_NO(11) | 4) +#define PINMUX_GPIO11__FUNC_HFRP_JTAG0_TDI (MTK_PIN_NO(11) | 5) +#define PINMUX_GPIO11__FUNC_IO_JTAG_TDI (MTK_PIN_NO(11) | 6) +#define PINMUX_GPIO11__FUNC_CONN_BGF_MCU_TDO (MTK_PIN_NO(11) | 7) + +#define PINMUX_GPIO12__FUNC_GPIO12 (MTK_PIN_NO(12) | 0) +#define PINMUX_GPIO12__FUNC_SCP_JTAG0_TDO_VLP (MTK_PIN_NO(12) | 2) +#define PINMUX_GPIO12__FUNC_SPM_JTAG_TDO_VLP (MTK_PIN_NO(12) | 3) +#define PINMUX_GPIO12__FUNC_SSPM_JTAG_TDO_VLP (MTK_PIN_NO(12) | 4) +#define PINMUX_GPIO12__FUNC_HFRP_JTAG0_TDO (MTK_PIN_NO(12) | 5) +#define PINMUX_GPIO12__FUNC_IO_JTAG_TDO (MTK_PIN_NO(12) | 6) +#define PINMUX_GPIO12__FUNC_CONN_BGF_MCU_TMS (MTK_PIN_NO(12) | 7) + +#define PINMUX_GPIO13__FUNC_GPIO13 (MTK_PIN_NO(13) | 0) +#define PINMUX_GPIO13__FUNC_MFG_EB_JTAG_TDI (MTK_PIN_NO(13) | 1) +#define PINMUX_GPIO13__FUNC_CONN_WF_MCU_TDI (MTK_PIN_NO(13) | 2) +#define PINMUX_GPIO13__FUNC_SCP_JTAG0_TDI_VCORE (MTK_PIN_NO(13) | 3) +#define PINMUX_GPIO13__FUNC_SPM_JTAG_TDI_VCORE (MTK_PIN_NO(13) | 5) +#define PINMUX_GPIO13__FUNC_MCUPM_JTAG_TDI (MTK_PIN_NO(13) | 6) + +#define PINMUX_GPIO14__FUNC_GPIO14 (MTK_PIN_NO(14) | 0) +#define PINMUX_GPIO14__FUNC_MFG_EB_JTAG_TRSTN (MTK_PIN_NO(14) | 1) +#define PINMUX_GPIO14__FUNC_CONN_WF_MCU_TRST_B (MTK_PIN_NO(14) | 2) +#define PINMUX_GPIO14__FUNC_SCP_JTAG0_TRSTN_VCORE (MTK_PIN_NO(14) | 3) +#define PINMUX_GPIO14__FUNC_SPM_JTAG_TRSTN_VCORE (MTK_PIN_NO(14) | 5) +#define PINMUX_GPIO14__FUNC_MCUPM_JTAG_TRSTN (MTK_PIN_NO(14) | 6) + +#define PINMUX_GPIO15__FUNC_GPIO15 (MTK_PIN_NO(15) | 0) +#define PINMUX_GPIO15__FUNC_MFG_EB_JTAG_TCK (MTK_PIN_NO(15) | 1) +#define PINMUX_GPIO15__FUNC_CONN_WF_MCU_TCK (MTK_PIN_NO(15) | 2) +#define PINMUX_GPIO15__FUNC_SCP_JTAG0_TCK_VCORE (MTK_PIN_NO(15) | 3) +#define PINMUX_GPIO15__FUNC_SPM_JTAG_TCK_VCORE (MTK_PIN_NO(15) | 5) +#define PINMUX_GPIO15__FUNC_MCUPM_JTAG_TCK (MTK_PIN_NO(15) | 6) + +#define PINMUX_GPIO16__FUNC_GPIO16 (MTK_PIN_NO(16) | 0) +#define PINMUX_GPIO16__FUNC_MFG_EB_JTAG_TDO (MTK_PIN_NO(16) | 1) +#define PINMUX_GPIO16__FUNC_CONN_WF_MCU_TDO (MTK_PIN_NO(16) | 2) +#define PINMUX_GPIO16__FUNC_SCP_JTAG0_TDO_VCORE (MTK_PIN_NO(16) | 3) +#define PINMUX_GPIO16__FUNC_SPM_JTAG_TDO_VCORE (MTK_PIN_NO(16) | 5) +#define PINMUX_GPIO16__FUNC_MCUPM_JTAG_TDO (MTK_PIN_NO(16) | 6) + +#define PINMUX_GPIO17__FUNC_GPIO17 (MTK_PIN_NO(17) | 0) +#define PINMUX_GPIO17__FUNC_MFG_EB_JTAG_TMS (MTK_PIN_NO(17) | 1) +#define PINMUX_GPIO17__FUNC_CONN_WF_MCU_TMS (MTK_PIN_NO(17) | 2) +#define PINMUX_GPIO17__FUNC_SCP_JTAG0_TMS_VCORE (MTK_PIN_NO(17) | 3) +#define PINMUX_GPIO17__FUNC_SPM_JTAG_TMS_VCORE (MTK_PIN_NO(17) | 5) +#define PINMUX_GPIO17__FUNC_MCUPM_JTAG_TMS (MTK_PIN_NO(17) | 6) + +#define PINMUX_GPIO18__FUNC_GPIO18 (MTK_PIN_NO(18) | 0) +#define PINMUX_GPIO18__FUNC_CONN_BT_TXD (MTK_PIN_NO(18) | 2) +#define PINMUX_GPIO18__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(18) | 3) +#define PINMUX_GPIO18__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(18) | 6) + +#define PINMUX_GPIO19__FUNC_GPIO19 (MTK_PIN_NO(19) | 0) +#define PINMUX_GPIO19__FUNC_PWM_0 (MTK_PIN_NO(19) | 1) +#define PINMUX_GPIO19__FUNC_SDA10 (MTK_PIN_NO(19) | 3) +#define PINMUX_GPIO19__FUNC_MD32_0_GPIO0 (MTK_PIN_NO(19) | 4) +#define PINMUX_GPIO19__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(19) | 5) +#define PINMUX_GPIO19__FUNC_DBG_MON_A9 (MTK_PIN_NO(19) | 7) + +#define PINMUX_GPIO20__FUNC_GPIO20 (MTK_PIN_NO(20) | 0) +#define PINMUX_GPIO20__FUNC_PWM_1 (MTK_PIN_NO(20) | 1) +#define PINMUX_GPIO20__FUNC_SPI4_CLK (MTK_PIN_NO(20) | 2) +#define PINMUX_GPIO20__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(20) | 4) +#define PINMUX_GPIO20__FUNC_DAP_SONIC_SWCK (MTK_PIN_NO(20) | 6) +#define PINMUX_GPIO20__FUNC_DBG_MON_A10 (MTK_PIN_NO(20) | 7) + +#define PINMUX_GPIO21__FUNC_GPIO21 (MTK_PIN_NO(21) | 0) +#define PINMUX_GPIO21__FUNC_PWM_2 (MTK_PIN_NO(21) | 1) +#define PINMUX_GPIO21__FUNC_SPI4_CSB (MTK_PIN_NO(21) | 2) +#define PINMUX_GPIO21__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(21) | 4) +#define PINMUX_GPIO21__FUNC_IDDIG (MTK_PIN_NO(21) | 5) +#define PINMUX_GPIO21__FUNC_DAP_SONIC_SWD (MTK_PIN_NO(21) | 6) +#define PINMUX_GPIO21__FUNC_DBG_MON_A11 (MTK_PIN_NO(21) | 7) + +#define PINMUX_GPIO22__FUNC_GPIO22 (MTK_PIN_NO(22) | 0) +#define PINMUX_GPIO22__FUNC_PWM_3 (MTK_PIN_NO(22) | 1) +#define PINMUX_GPIO22__FUNC_SPI4_MO (MTK_PIN_NO(22) | 2) +#define PINMUX_GPIO22__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(22) | 4) +#define PINMUX_GPIO22__FUNC_VBUSVALID (MTK_PIN_NO(22) | 5) +#define PINMUX_GPIO22__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(22) | 6) +#define PINMUX_GPIO22__FUNC_DBG_MON_A12 (MTK_PIN_NO(22) | 7) + +#define PINMUX_GPIO23__FUNC_GPIO23 (MTK_PIN_NO(23) | 0) +#define PINMUX_GPIO23__FUNC_SPI4_MI (MTK_PIN_NO(23) | 2) +#define PINMUX_GPIO23__FUNC_MD32_1_GPIO0 (MTK_PIN_NO(23) | 4) +#define PINMUX_GPIO23__FUNC_USB_DRVVBUS (MTK_PIN_NO(23) | 5) +#define PINMUX_GPIO23__FUNC_DAP_MD32_SWD (MTK_PIN_NO(23) | 6) +#define PINMUX_GPIO23__FUNC_DBG_MON_A13 (MTK_PIN_NO(23) | 7) + +#define PINMUX_GPIO24__FUNC_GPIO24 (MTK_PIN_NO(24) | 0) +#define PINMUX_GPIO24__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(24) | 1) +#define PINMUX_GPIO24__FUNC_SCL12 (MTK_PIN_NO(24) | 2) +#define PINMUX_GPIO24__FUNC_SCL10 (MTK_PIN_NO(24) | 3) +#define PINMUX_GPIO24__FUNC_CMVREF0 (MTK_PIN_NO(24) | 4) +#define PINMUX_GPIO24__FUNC_CONN_WIFI_TXD (MTK_PIN_NO(24) | 5) +#define PINMUX_GPIO24__FUNC_CMFLASH0 (MTK_PIN_NO(24) | 6) +#define PINMUX_GPIO24__FUNC_DBG_MON_A14 (MTK_PIN_NO(24) | 7) + +#define PINMUX_GPIO25__FUNC_GPIO25 (MTK_PIN_NO(25) | 0) +#define PINMUX_GPIO25__FUNC_SPI6_CLK (MTK_PIN_NO(25) | 1) +#define PINMUX_GPIO25__FUNC_SCL11 (MTK_PIN_NO(25) | 2) +#define PINMUX_GPIO25__FUNC_CMVREF1 (MTK_PIN_NO(25) | 4) +#define PINMUX_GPIO25__FUNC_CMFLASH1 (MTK_PIN_NO(25) | 6) +#define PINMUX_GPIO25__FUNC_DBG_MON_A15 (MTK_PIN_NO(25) | 7) + +#define PINMUX_GPIO26__FUNC_GPIO26 (MTK_PIN_NO(26) | 0) +#define PINMUX_GPIO26__FUNC_SPI6_CSB (MTK_PIN_NO(26) | 1) +#define PINMUX_GPIO26__FUNC_SDA11 (MTK_PIN_NO(26) | 2) +#define PINMUX_GPIO26__FUNC_USB_DRVVBUS (MTK_PIN_NO(26) | 3) +#define PINMUX_GPIO26__FUNC_CMVREF2 (MTK_PIN_NO(26) | 4) +#define PINMUX_GPIO26__FUNC_CMFLASH2 (MTK_PIN_NO(26) | 6) +#define PINMUX_GPIO26__FUNC_DBG_MON_A16 (MTK_PIN_NO(26) | 7) + +#define PINMUX_GPIO27__FUNC_GPIO27 (MTK_PIN_NO(27) | 0) +#define PINMUX_GPIO27__FUNC_SPI6_MO (MTK_PIN_NO(27) | 1) +#define PINMUX_GPIO27__FUNC_VBUSVALID (MTK_PIN_NO(27) | 3) +#define PINMUX_GPIO27__FUNC_CMVREF3 (MTK_PIN_NO(27) | 4) +#define PINMUX_GPIO27__FUNC_DMIC1_CLK (MTK_PIN_NO(27) | 5) +#define PINMUX_GPIO27__FUNC_CMFLASH3 (MTK_PIN_NO(27) | 6) +#define PINMUX_GPIO27__FUNC_DBG_MON_A17 (MTK_PIN_NO(27) | 7) + +#define PINMUX_GPIO28__FUNC_GPIO28 (MTK_PIN_NO(28) | 0) +#define PINMUX_GPIO28__FUNC_SPI6_MI (MTK_PIN_NO(28) | 1) +#define PINMUX_GPIO28__FUNC_IDDIG (MTK_PIN_NO(28) | 3) +#define PINMUX_GPIO28__FUNC_DMIC1_DAT (MTK_PIN_NO(28) | 5) +#define PINMUX_GPIO28__FUNC_CMFLASH0 (MTK_PIN_NO(28) | 6) +#define PINMUX_GPIO28__FUNC_DBG_MON_A18 (MTK_PIN_NO(28) | 7) + +#define PINMUX_GPIO29__FUNC_GPIO29 (MTK_PIN_NO(29) | 0) +#define PINMUX_GPIO29__FUNC_I2SIN2_BCK (MTK_PIN_NO(29) | 1) +#define PINMUX_GPIO29__FUNC_TP_UTXD1_VCORE (MTK_PIN_NO(29) | 2) +#define PINMUX_GPIO29__FUNC_MD_UTXD0 (MTK_PIN_NO(29) | 3) +#define PINMUX_GPIO29__FUNC_SSPM_UTXD_AO_VCORE (MTK_PIN_NO(29) | 4) +#define PINMUX_GPIO29__FUNC_MD32_1_TXD (MTK_PIN_NO(29) | 5) +#define PINMUX_GPIO29__FUNC_CONN_BT_TXD (MTK_PIN_NO(29) | 6) +#define PINMUX_GPIO29__FUNC_PTA_TXD (MTK_PIN_NO(29) | 7) + +#define PINMUX_GPIO30__FUNC_GPIO30 (MTK_PIN_NO(30) | 0) +#define PINMUX_GPIO30__FUNC_I2SIN2_LRCK (MTK_PIN_NO(30) | 1) +#define PINMUX_GPIO30__FUNC_TP_URXD1_VCORE (MTK_PIN_NO(30) | 2) +#define PINMUX_GPIO30__FUNC_MD_URXD0 (MTK_PIN_NO(30) | 3) +#define PINMUX_GPIO30__FUNC_SSPM_URXD_AO_VCORE (MTK_PIN_NO(30) | 4) +#define PINMUX_GPIO30__FUNC_MD32_1_RXD (MTK_PIN_NO(30) | 5) +#define PINMUX_GPIO30__FUNC_PTA_RXD (MTK_PIN_NO(30) | 7) + +#define PINMUX_GPIO31__FUNC_GPIO31 (MTK_PIN_NO(31) | 0) +#define PINMUX_GPIO31__FUNC_I2SOUT2_DO (MTK_PIN_NO(31) | 1) +#define PINMUX_GPIO31__FUNC_TP_UTXD2_VCORE (MTK_PIN_NO(31) | 2) +#define PINMUX_GPIO31__FUNC_MD_UTXD1 (MTK_PIN_NO(31) | 3) +#define PINMUX_GPIO31__FUNC_HFRP_UTXD1 (MTK_PIN_NO(31) | 4) +#define PINMUX_GPIO31__FUNC_MD32_0_TXD (MTK_PIN_NO(31) | 5) +#define PINMUX_GPIO31__FUNC_CONN_WIFI_TXD (MTK_PIN_NO(31) | 6) +#define PINMUX_GPIO31__FUNC_CONN_BGF_UART0_TXD (MTK_PIN_NO(31) | 7) + +#define PINMUX_GPIO32__FUNC_GPIO32 (MTK_PIN_NO(32) | 0) +#define PINMUX_GPIO32__FUNC_I2SIN2_DI (MTK_PIN_NO(32) | 1) +#define PINMUX_GPIO32__FUNC_TP_URXD2_VCORE (MTK_PIN_NO(32) | 2) +#define PINMUX_GPIO32__FUNC_MD_URXD1 (MTK_PIN_NO(32) | 3) +#define PINMUX_GPIO32__FUNC_HFRP_URXD1 (MTK_PIN_NO(32) | 4) +#define PINMUX_GPIO32__FUNC_MD32_0_RXD (MTK_PIN_NO(32) | 5) +#define PINMUX_GPIO32__FUNC_CONN_BGF_UART0_RXD (MTK_PIN_NO(32) | 7) + +#define PINMUX_GPIO33__FUNC_GPIO33 (MTK_PIN_NO(33) | 0) +#define PINMUX_GPIO33__FUNC_ANT_SEL0 (MTK_PIN_NO(33) | 1) +#define PINMUX_GPIO33__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(33) | 3) +#define PINMUX_GPIO33__FUNC_SCL1 (MTK_PIN_NO(33) | 4) +#define PINMUX_GPIO33__FUNC_CONN_BPI_BUS18_ANT1 (MTK_PIN_NO(33) | 5) +#define PINMUX_GPIO33__FUNC_MD_UCTS0 (MTK_PIN_NO(33) | 6) + +#define PINMUX_GPIO34__FUNC_GPIO34 (MTK_PIN_NO(34) | 0) +#define PINMUX_GPIO34__FUNC_ANT_SEL1 (MTK_PIN_NO(34) | 1) +#define PINMUX_GPIO34__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(34) | 3) +#define PINMUX_GPIO34__FUNC_SDA1 (MTK_PIN_NO(34) | 4) +#define PINMUX_GPIO34__FUNC_CONN_BPI_BUS19_ANT2 (MTK_PIN_NO(34) | 5) +#define PINMUX_GPIO34__FUNC_MD_URTS0 (MTK_PIN_NO(34) | 6) + +#define PINMUX_GPIO35__FUNC_GPIO35 (MTK_PIN_NO(35) | 0) +#define PINMUX_GPIO35__FUNC_ANT_SEL2 (MTK_PIN_NO(35) | 1) +#define PINMUX_GPIO35__FUNC_SSPM_JTAG_TCK_VCORE (MTK_PIN_NO(35) | 2) +#define PINMUX_GPIO35__FUNC_UDI_TCK (MTK_PIN_NO(35) | 3) +#define PINMUX_GPIO35__FUNC_CONN_BPI_BUS20_ANT3 (MTK_PIN_NO(35) | 5) +#define PINMUX_GPIO35__FUNC_MD_UCTS1 (MTK_PIN_NO(35) | 6) + +#define PINMUX_GPIO36__FUNC_GPIO36 (MTK_PIN_NO(36) | 0) +#define PINMUX_GPIO36__FUNC_ANT_SEL3 (MTK_PIN_NO(36) | 1) +#define PINMUX_GPIO36__FUNC_SSPM_JTAG_TRSTN_VCORE (MTK_PIN_NO(36) | 2) +#define PINMUX_GPIO36__FUNC_UDI_NTRST (MTK_PIN_NO(36) | 3) +#define PINMUX_GPIO36__FUNC_CONN_BPI_BUS21_ANT4 (MTK_PIN_NO(36) | 5) +#define PINMUX_GPIO36__FUNC_MD_URTS1 (MTK_PIN_NO(36) | 6) + +#define PINMUX_GPIO37__FUNC_GPIO37 (MTK_PIN_NO(37) | 0) +#define PINMUX_GPIO37__FUNC_ANT_SEL4 (MTK_PIN_NO(37) | 1) +#define PINMUX_GPIO37__FUNC_SSPM_JTAG_TDI_VCORE (MTK_PIN_NO(37) | 2) +#define PINMUX_GPIO37__FUNC_UDI_TDI (MTK_PIN_NO(37) | 3) +#define PINMUX_GPIO37__FUNC_TP_UCTS1_VCORE (MTK_PIN_NO(37) | 6) + +#define PINMUX_GPIO38__FUNC_GPIO38 (MTK_PIN_NO(38) | 0) +#define PINMUX_GPIO38__FUNC_ANT_SEL5 (MTK_PIN_NO(38) | 1) +#define PINMUX_GPIO38__FUNC_SSPM_JTAG_TMS_VCORE (MTK_PIN_NO(38) | 2) +#define PINMUX_GPIO38__FUNC_UDI_TMS (MTK_PIN_NO(38) | 3) +#define PINMUX_GPIO38__FUNC_TP_URTS1_VCORE (MTK_PIN_NO(38) | 6) + +#define PINMUX_GPIO39__FUNC_GPIO39 (MTK_PIN_NO(39) | 0) +#define PINMUX_GPIO39__FUNC_ANT_SEL6 (MTK_PIN_NO(39) | 1) +#define PINMUX_GPIO39__FUNC_SSPM_JTAG_TDO_VCORE (MTK_PIN_NO(39) | 2) +#define PINMUX_GPIO39__FUNC_UDI_TDO (MTK_PIN_NO(39) | 3) +#define PINMUX_GPIO39__FUNC_CLKM3 (MTK_PIN_NO(39) | 5) + +#define PINMUX_GPIO40__FUNC_GPIO40 (MTK_PIN_NO(40) | 0) +#define PINMUX_GPIO40__FUNC_ANT_SEL7 (MTK_PIN_NO(40) | 1) +#define PINMUX_GPIO40__FUNC_PMSR_SMAP (MTK_PIN_NO(40) | 2) +#define PINMUX_GPIO40__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(40) | 3) +#define PINMUX_GPIO40__FUNC_CONN_WIFI_TXD (MTK_PIN_NO(40) | 4) +#define PINMUX_GPIO40__FUNC_GPS_PPS (MTK_PIN_NO(40) | 5) + +#define PINMUX_GPIO41__FUNC_GPIO41 (MTK_PIN_NO(41) | 0) +#define PINMUX_GPIO41__FUNC_I2SIN1_MCK (MTK_PIN_NO(41) | 1) +#define PINMUX_GPIO41__FUNC_IDDIG (MTK_PIN_NO(41) | 2) +#define PINMUX_GPIO41__FUNC_GPS_PPS (MTK_PIN_NO(41) | 3) +#define PINMUX_GPIO41__FUNC_HFRP_UCTS1 (MTK_PIN_NO(41) | 4) +#define PINMUX_GPIO41__FUNC_TP_UCTS2_VCORE (MTK_PIN_NO(41) | 5) +#define PINMUX_GPIO41__FUNC_ANT_SEL8 (MTK_PIN_NO(41) | 6) +#define PINMUX_GPIO41__FUNC_DBG_MON_B1 (MTK_PIN_NO(41) | 7) + +#define PINMUX_GPIO42__FUNC_GPIO42 (MTK_PIN_NO(42) | 0) +#define PINMUX_GPIO42__FUNC_I2SIN1_BCK (MTK_PIN_NO(42) | 1) +#define PINMUX_GPIO42__FUNC_I2SIN4_BCK (MTK_PIN_NO(42) | 2) +#define PINMUX_GPIO42__FUNC_HFRP_URTS1 (MTK_PIN_NO(42) | 4) +#define PINMUX_GPIO42__FUNC_TP_URTS2_VCORE (MTK_PIN_NO(42) | 5) +#define PINMUX_GPIO42__FUNC_ANT_SEL9 (MTK_PIN_NO(42) | 6) +#define PINMUX_GPIO42__FUNC_DBG_MON_B2 (MTK_PIN_NO(42) | 7) + +#define PINMUX_GPIO43__FUNC_GPIO43 (MTK_PIN_NO(43) | 0) +#define PINMUX_GPIO43__FUNC_I2SIN1_LRCK (MTK_PIN_NO(43) | 1) +#define PINMUX_GPIO43__FUNC_I2SIN4_LRCK (MTK_PIN_NO(43) | 2) +#define PINMUX_GPIO43__FUNC_ANT_SEL10 (MTK_PIN_NO(43) | 6) +#define PINMUX_GPIO43__FUNC_DBG_MON_B3 (MTK_PIN_NO(43) | 7) + +#define PINMUX_GPIO44__FUNC_GPIO44 (MTK_PIN_NO(44) | 0) +#define PINMUX_GPIO44__FUNC_I2SOUT1_DO (MTK_PIN_NO(44) | 1) +#define PINMUX_GPIO44__FUNC_I2SOUT4_DATA0 (MTK_PIN_NO(44) | 2) +#define PINMUX_GPIO44__FUNC_ANT_SEL11 (MTK_PIN_NO(44) | 6) +#define PINMUX_GPIO44__FUNC_DBG_MON_B4 (MTK_PIN_NO(44) | 7) + +#define PINMUX_GPIO45__FUNC_GPIO45 (MTK_PIN_NO(45) | 0) +#define PINMUX_GPIO45__FUNC_I2SIN1_DI (MTK_PIN_NO(45) | 1) +#define PINMUX_GPIO45__FUNC_I2SIN4_DATA0 (MTK_PIN_NO(45) | 2) +#define PINMUX_GPIO45__FUNC_AGPS_SYNC (MTK_PIN_NO(45) | 5) +#define PINMUX_GPIO45__FUNC_ANT_SEL12 (MTK_PIN_NO(45) | 6) +#define PINMUX_GPIO45__FUNC_DBG_MON_B5 (MTK_PIN_NO(45) | 7) + +#define PINMUX_GPIO46__FUNC_GPIO46 (MTK_PIN_NO(46) | 0) +#define PINMUX_GPIO46__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(46) | 1) +#define PINMUX_GPIO46__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(46) | 2) +#define PINMUX_GPIO46__FUNC_SRCLKENAI0 (MTK_PIN_NO(46) | 3) +#define PINMUX_GPIO46__FUNC_SSPM_UTXD_AO_VLP (MTK_PIN_NO(46) | 5) +#define PINMUX_GPIO46__FUNC_MD_MCIF_UTXD0 (MTK_PIN_NO(46) | 6) +#define PINMUX_GPIO46__FUNC_DBG_MON_B6 (MTK_PIN_NO(46) | 7) + +#define PINMUX_GPIO47__FUNC_GPIO47 (MTK_PIN_NO(47) | 0) +#define PINMUX_GPIO47__FUNC_MD_INT2_C2K_UIM1_HOT_PLUG (MTK_PIN_NO(47) | 1) +#define PINMUX_GPIO47__FUNC_MD_INT1_C2K_UIM0_HOT_PLUG (MTK_PIN_NO(47) | 2) +#define PINMUX_GPIO47__FUNC_SRCLKENAI1 (MTK_PIN_NO(47) | 3) +#define PINMUX_GPIO47__FUNC_SRCLKENA1 (MTK_PIN_NO(47) | 4) +#define PINMUX_GPIO47__FUNC_SSPM_URXD_AO_VLP (MTK_PIN_NO(47) | 5) +#define PINMUX_GPIO47__FUNC_MD_MCIF_URXD0 (MTK_PIN_NO(47) | 6) +#define PINMUX_GPIO47__FUNC_DBG_MON_B7 (MTK_PIN_NO(47) | 7) + +#define PINMUX_GPIO48__FUNC_GPIO48 (MTK_PIN_NO(48) | 0) +#define PINMUX_GPIO48__FUNC_UTXD0 (MTK_PIN_NO(48) | 1) +#define PINMUX_GPIO48__FUNC_MD_UTXD1 (MTK_PIN_NO(48) | 3) +#define PINMUX_GPIO48__FUNC_HFRP_UTXD1 (MTK_PIN_NO(48) | 4) +#define PINMUX_GPIO48__FUNC_MD32_0_TXD (MTK_PIN_NO(48) | 5) + +#define PINMUX_GPIO49__FUNC_GPIO49 (MTK_PIN_NO(49) | 0) +#define PINMUX_GPIO49__FUNC_URXD0 (MTK_PIN_NO(49) | 1) +#define PINMUX_GPIO49__FUNC_MD_URXD1 (MTK_PIN_NO(49) | 3) +#define PINMUX_GPIO49__FUNC_HFRP_URXD1 (MTK_PIN_NO(49) | 4) +#define PINMUX_GPIO49__FUNC_MD32_0_RXD (MTK_PIN_NO(49) | 5) + +#define PINMUX_GPIO50__FUNC_GPIO50 (MTK_PIN_NO(50) | 0) +#define PINMUX_GPIO50__FUNC_MD_UTXD0 (MTK_PIN_NO(50) | 1) +#define PINMUX_GPIO50__FUNC_TP_UTXD1_VLP (MTK_PIN_NO(50) | 2) +#define PINMUX_GPIO50__FUNC_CONN_BGF_UART0_TXD (MTK_PIN_NO(50) | 3) +#define PINMUX_GPIO50__FUNC_SSPM_UTXD_AO_VLP (MTK_PIN_NO(50) | 4) +#define PINMUX_GPIO50__FUNC_MD_MCIF_UTXD0 (MTK_PIN_NO(50) | 5) +#define PINMUX_GPIO50__FUNC_TP_UTXD2_VLP (MTK_PIN_NO(50) | 6) +#define PINMUX_GPIO50__FUNC_UTXD1 (MTK_PIN_NO(50) | 7) + +#define PINMUX_GPIO51__FUNC_GPIO51 (MTK_PIN_NO(51) | 0) +#define PINMUX_GPIO51__FUNC_MD_URXD0 (MTK_PIN_NO(51) | 1) +#define PINMUX_GPIO51__FUNC_TP_URXD1_VLP (MTK_PIN_NO(51) | 2) +#define PINMUX_GPIO51__FUNC_CONN_BGF_UART0_RXD (MTK_PIN_NO(51) | 3) +#define PINMUX_GPIO51__FUNC_SSPM_URXD_AO_VLP (MTK_PIN_NO(51) | 4) +#define PINMUX_GPIO51__FUNC_MD_MCIF_URXD0 (MTK_PIN_NO(51) | 5) +#define PINMUX_GPIO51__FUNC_TP_URXD2_VLP (MTK_PIN_NO(51) | 6) +#define PINMUX_GPIO51__FUNC_URXD1 (MTK_PIN_NO(51) | 7) + +#define PINMUX_GPIO52__FUNC_GPIO52 (MTK_PIN_NO(52) | 0) +#define PINMUX_GPIO52__FUNC_KPROW0 (MTK_PIN_NO(52) | 1) +#define PINMUX_GPIO52__FUNC_CMFLASH0 (MTK_PIN_NO(52) | 2) +#define PINMUX_GPIO52__FUNC_SDA12 (MTK_PIN_NO(52) | 3) +#define PINMUX_GPIO52__FUNC_DSI_TE1 (MTK_PIN_NO(52) | 4) + +#define PINMUX_GPIO53__FUNC_GPIO53 (MTK_PIN_NO(53) | 0) +#define PINMUX_GPIO53__FUNC_KPROW1 (MTK_PIN_NO(53) | 1) +#define PINMUX_GPIO53__FUNC_CMFLASH1 (MTK_PIN_NO(53) | 2) +#define PINMUX_GPIO53__FUNC_SCL12 (MTK_PIN_NO(53) | 3) +#define PINMUX_GPIO53__FUNC_LCM_RST1 (MTK_PIN_NO(53) | 4) +#define PINMUX_GPIO53__FUNC_EXTIF0_ACT (MTK_PIN_NO(53) | 6) + +#define PINMUX_GPIO54__FUNC_GPIO54 (MTK_PIN_NO(54) | 0) +#define PINMUX_GPIO54__FUNC_KPCOL0_VLP (MTK_PIN_NO(54) | 1) +#define PINMUX_GPIO54__FUNC_KPCOL0_VLP_A (MTK_PIN_NO(54) | 7) + +#define PINMUX_GPIO55__FUNC_GPIO55 (MTK_PIN_NO(55) | 0) +#define PINMUX_GPIO55__FUNC_KPCOL1 (MTK_PIN_NO(55) | 1) +#define PINMUX_GPIO55__FUNC_SDA12 (MTK_PIN_NO(55) | 3) +#define PINMUX_GPIO55__FUNC_DISP_PWM1 (MTK_PIN_NO(55) | 4) +#define PINMUX_GPIO55__FUNC_JTRSTN_SEL1_VCORE (MTK_PIN_NO(55) | 7) + +#define PINMUX_GPIO56__FUNC_GPIO56 (MTK_PIN_NO(56) | 0) +#define PINMUX_GPIO56__FUNC_SPI0_CLK (MTK_PIN_NO(56) | 1) +#define PINMUX_GPIO56__FUNC_JTCK_SEL1_VCORE (MTK_PIN_NO(56) | 7) + +#define PINMUX_GPIO57__FUNC_GPIO57 (MTK_PIN_NO(57) | 0) +#define PINMUX_GPIO57__FUNC_SPI0_CSB (MTK_PIN_NO(57) | 1) +#define PINMUX_GPIO57__FUNC_JTMS_SEL1_VCORE (MTK_PIN_NO(57) | 7) + +#define PINMUX_GPIO58__FUNC_GPIO58 (MTK_PIN_NO(58) | 0) +#define PINMUX_GPIO58__FUNC_SPI0_MO (MTK_PIN_NO(58) | 1) +#define PINMUX_GPIO58__FUNC_JTDO_SEL1_VCORE (MTK_PIN_NO(58) | 7) + +#define PINMUX_GPIO59__FUNC_GPIO59 (MTK_PIN_NO(59) | 0) +#define PINMUX_GPIO59__FUNC_SPI0_MI (MTK_PIN_NO(59) | 1) +#define PINMUX_GPIO59__FUNC_JTDI_SEL1_VCORE (MTK_PIN_NO(59) | 7) + +#define PINMUX_GPIO60__FUNC_GPIO60 (MTK_PIN_NO(60) | 0) +#define PINMUX_GPIO60__FUNC_SCP_SPI1_CK (MTK_PIN_NO(60) | 1) +#define PINMUX_GPIO60__FUNC_SPI1_CLK (MTK_PIN_NO(60) | 2) +#define PINMUX_GPIO60__FUNC_SCP_SCL3 (MTK_PIN_NO(60) | 4) +#define PINMUX_GPIO60__FUNC_TP_GPIO0_AO (MTK_PIN_NO(60) | 5) +#define PINMUX_GPIO60__FUNC_UTXD0 (MTK_PIN_NO(60) | 6) +#define PINMUX_GPIO60__FUNC_TP_UTXD2_VLP (MTK_PIN_NO(60) | 7) + +#define PINMUX_GPIO61__FUNC_GPIO61 (MTK_PIN_NO(61) | 0) +#define PINMUX_GPIO61__FUNC_SCP_SPI1_CS (MTK_PIN_NO(61) | 1) +#define PINMUX_GPIO61__FUNC_SPI1_CSB (MTK_PIN_NO(61) | 2) +#define PINMUX_GPIO61__FUNC_TP_GPIO1_AO (MTK_PIN_NO(61) | 5) +#define PINMUX_GPIO61__FUNC_URXD0 (MTK_PIN_NO(61) | 6) +#define PINMUX_GPIO61__FUNC_TP_URXD2_VLP (MTK_PIN_NO(61) | 7) + +#define PINMUX_GPIO62__FUNC_GPIO62 (MTK_PIN_NO(62) | 0) +#define PINMUX_GPIO62__FUNC_SCP_SPI1_MO (MTK_PIN_NO(62) | 1) +#define PINMUX_GPIO62__FUNC_SPI1_MO (MTK_PIN_NO(62) | 2) +#define PINMUX_GPIO62__FUNC_SCP_SCL3 (MTK_PIN_NO(62) | 3) +#define PINMUX_GPIO62__FUNC_SCP_SDA3 (MTK_PIN_NO(62) | 4) +#define PINMUX_GPIO62__FUNC_TP_GPIO2_AO (MTK_PIN_NO(62) | 5) +#define PINMUX_GPIO62__FUNC_DBG_MON_B29 (MTK_PIN_NO(62) | 7) + +#define PINMUX_GPIO63__FUNC_GPIO63 (MTK_PIN_NO(63) | 0) +#define PINMUX_GPIO63__FUNC_SCP_SPI1_MI (MTK_PIN_NO(63) | 1) +#define PINMUX_GPIO63__FUNC_SPI1_MI (MTK_PIN_NO(63) | 2) +#define PINMUX_GPIO63__FUNC_SCP_SDA3 (MTK_PIN_NO(63) | 3) +#define PINMUX_GPIO63__FUNC_TP_GPIO3_AO (MTK_PIN_NO(63) | 5) +#define PINMUX_GPIO63__FUNC_DBG_MON_B30 (MTK_PIN_NO(63) | 7) + +#define PINMUX_GPIO64__FUNC_GPIO64 (MTK_PIN_NO(64) | 0) +#define PINMUX_GPIO64__FUNC_SCP_SPI2_CK (MTK_PIN_NO(64) | 1) +#define PINMUX_GPIO64__FUNC_SPI2_CLK (MTK_PIN_NO(64) | 2) +#define PINMUX_GPIO64__FUNC_SCP_SCL2 (MTK_PIN_NO(64) | 4) +#define PINMUX_GPIO64__FUNC_TP_GPIO4_AO (MTK_PIN_NO(64) | 5) + +#define PINMUX_GPIO65__FUNC_GPIO65 (MTK_PIN_NO(65) | 0) +#define PINMUX_GPIO65__FUNC_SCP_SPI2_CS (MTK_PIN_NO(65) | 1) +#define PINMUX_GPIO65__FUNC_SPI2_CSB (MTK_PIN_NO(65) | 2) +#define PINMUX_GPIO65__FUNC_TP_GPIO5_AO (MTK_PIN_NO(65) | 5) +#define PINMUX_GPIO65__FUNC_DBG_MON_B31 (MTK_PIN_NO(65) | 7) + +#define PINMUX_GPIO66__FUNC_GPIO66 (MTK_PIN_NO(66) | 0) +#define PINMUX_GPIO66__FUNC_SCP_SPI2_MO (MTK_PIN_NO(66) | 1) +#define PINMUX_GPIO66__FUNC_SPI2_MO (MTK_PIN_NO(66) | 2) +#define PINMUX_GPIO66__FUNC_SCP_SCL2 (MTK_PIN_NO(66) | 3) +#define PINMUX_GPIO66__FUNC_SCP_SDA2 (MTK_PIN_NO(66) | 4) +#define PINMUX_GPIO66__FUNC_TP_GPIO6_AO (MTK_PIN_NO(66) | 5) + +#define PINMUX_GPIO67__FUNC_GPIO67 (MTK_PIN_NO(67) | 0) +#define PINMUX_GPIO67__FUNC_SCP_SPI2_MI (MTK_PIN_NO(67) | 1) +#define PINMUX_GPIO67__FUNC_SPI2_MI (MTK_PIN_NO(67) | 2) +#define PINMUX_GPIO67__FUNC_SCP_SDA2 (MTK_PIN_NO(67) | 3) +#define PINMUX_GPIO67__FUNC_TP_GPIO7_AO (MTK_PIN_NO(67) | 5) + +#define PINMUX_GPIO68__FUNC_GPIO68 (MTK_PIN_NO(68) | 0) +#define PINMUX_GPIO68__FUNC_SCP_SPI3_CK (MTK_PIN_NO(68) | 1) +#define PINMUX_GPIO68__FUNC_SPI3_CLK (MTK_PIN_NO(68) | 2) +#define PINMUX_GPIO68__FUNC_MD_INT4 (MTK_PIN_NO(68) | 3) +#define PINMUX_GPIO68__FUNC_SCP_SCL4 (MTK_PIN_NO(68) | 4) +#define PINMUX_GPIO68__FUNC_TP_GPIO8_AO (MTK_PIN_NO(68) | 5) +#define PINMUX_GPIO68__FUNC_DBG_MON_A19 (MTK_PIN_NO(68) | 7) + +#define PINMUX_GPIO69__FUNC_GPIO69 (MTK_PIN_NO(69) | 0) +#define PINMUX_GPIO69__FUNC_SCP_SPI3_CS (MTK_PIN_NO(69) | 1) +#define PINMUX_GPIO69__FUNC_SPI3_CSB (MTK_PIN_NO(69) | 2) +#define PINMUX_GPIO69__FUNC_MD_INT3 (MTK_PIN_NO(69) | 3) +#define PINMUX_GPIO69__FUNC_TP_GPIO9_AO (MTK_PIN_NO(69) | 5) +#define PINMUX_GPIO69__FUNC_DBG_MON_A20 (MTK_PIN_NO(69) | 7) + +#define PINMUX_GPIO70__FUNC_GPIO70 (MTK_PIN_NO(70) | 0) +#define PINMUX_GPIO70__FUNC_SCP_SPI3_MO (MTK_PIN_NO(70) | 1) +#define PINMUX_GPIO70__FUNC_SPI3_MO (MTK_PIN_NO(70) | 2) +#define PINMUX_GPIO70__FUNC_SCP_SCL4 (MTK_PIN_NO(70) | 3) +#define PINMUX_GPIO70__FUNC_SCP_SDA4 (MTK_PIN_NO(70) | 4) +#define PINMUX_GPIO70__FUNC_TP_GPIO10_AO (MTK_PIN_NO(70) | 5) +#define PINMUX_GPIO70__FUNC_DBG_MON_A21 (MTK_PIN_NO(70) | 7) + +#define PINMUX_GPIO71__FUNC_GPIO71 (MTK_PIN_NO(71) | 0) +#define PINMUX_GPIO71__FUNC_SCP_SPI3_MI (MTK_PIN_NO(71) | 1) +#define PINMUX_GPIO71__FUNC_SPI3_MI (MTK_PIN_NO(71) | 2) +#define PINMUX_GPIO71__FUNC_SCP_SDA4 (MTK_PIN_NO(71) | 3) +#define PINMUX_GPIO71__FUNC_MD_INT0 (MTK_PIN_NO(71) | 4) +#define PINMUX_GPIO71__FUNC_TP_GPIO11_AO (MTK_PIN_NO(71) | 5) +#define PINMUX_GPIO71__FUNC_DBG_MON_A22 (MTK_PIN_NO(71) | 7) + +#define PINMUX_GPIO72__FUNC_GPIO72 (MTK_PIN_NO(72) | 0) +#define PINMUX_GPIO72__FUNC_SPI5_CLK (MTK_PIN_NO(72) | 1) +#define PINMUX_GPIO72__FUNC_SCP_SPI0_CK (MTK_PIN_NO(72) | 2) +#define PINMUX_GPIO72__FUNC_UCTS2 (MTK_PIN_NO(72) | 3) +#define PINMUX_GPIO72__FUNC_MBISTREADEN_TRIGGER (MTK_PIN_NO(72) | 4) +#define PINMUX_GPIO72__FUNC_TP_GPIO12_AO (MTK_PIN_NO(72) | 5) +#define PINMUX_GPIO72__FUNC_EXTIF0_ACT (MTK_PIN_NO(72) | 6) +#define PINMUX_GPIO72__FUNC_DAP_SONIC_SWCK (MTK_PIN_NO(72) | 7) + +#define PINMUX_GPIO73__FUNC_GPIO73 (MTK_PIN_NO(73) | 0) +#define PINMUX_GPIO73__FUNC_SPI5_CSB (MTK_PIN_NO(73) | 1) +#define PINMUX_GPIO73__FUNC_SCP_SPI0_CS (MTK_PIN_NO(73) | 2) +#define PINMUX_GPIO73__FUNC_URTS2 (MTK_PIN_NO(73) | 3) +#define PINMUX_GPIO73__FUNC_MBISTWRITEEN_TRIGGER (MTK_PIN_NO(73) | 4) +#define PINMUX_GPIO73__FUNC_TP_GPIO13_AO (MTK_PIN_NO(73) | 5) +#define PINMUX_GPIO73__FUNC_EXTIF0_PRI (MTK_PIN_NO(73) | 6) +#define PINMUX_GPIO73__FUNC_DAP_SONIC_SWD (MTK_PIN_NO(73) | 7) + +#define PINMUX_GPIO74__FUNC_GPIO74 (MTK_PIN_NO(74) | 0) +#define PINMUX_GPIO74__FUNC_SPI5_MO (MTK_PIN_NO(74) | 1) +#define PINMUX_GPIO74__FUNC_SCP_SPI0_MO (MTK_PIN_NO(74) | 2) +#define PINMUX_GPIO74__FUNC_UTXD2 (MTK_PIN_NO(74) | 3) +#define PINMUX_GPIO74__FUNC_TP_UTXD2_VCORE (MTK_PIN_NO(74) | 4) +#define PINMUX_GPIO74__FUNC_TP_GPIO14_AO (MTK_PIN_NO(74) | 5) +#define PINMUX_GPIO74__FUNC_EXTIF0_GNT_B (MTK_PIN_NO(74) | 6) +#define PINMUX_GPIO74__FUNC_DAP_MD32_SWCK (MTK_PIN_NO(74) | 7) + +#define PINMUX_GPIO75__FUNC_GPIO75 (MTK_PIN_NO(75) | 0) +#define PINMUX_GPIO75__FUNC_SPI5_MI (MTK_PIN_NO(75) | 1) +#define PINMUX_GPIO75__FUNC_SCP_SPI0_MI (MTK_PIN_NO(75) | 2) +#define PINMUX_GPIO75__FUNC_URXD2 (MTK_PIN_NO(75) | 3) +#define PINMUX_GPIO75__FUNC_TP_URXD2_VCORE (MTK_PIN_NO(75) | 4) +#define PINMUX_GPIO75__FUNC_TP_GPIO15_AO (MTK_PIN_NO(75) | 5) +#define PINMUX_GPIO75__FUNC_DAP_MD32_SWD (MTK_PIN_NO(75) | 7) + +#define PINMUX_GPIO76__FUNC_GPIO76 (MTK_PIN_NO(76) | 0) +#define PINMUX_GPIO76__FUNC_AP_GOOD (MTK_PIN_NO(76) | 1) +#define PINMUX_GPIO76__FUNC_CONN_WIFI_TXD (MTK_PIN_NO(76) | 3) +#define PINMUX_GPIO76__FUNC_GPS_PPS (MTK_PIN_NO(76) | 4) +#define PINMUX_GPIO76__FUNC_PMSR_SMAP (MTK_PIN_NO(76) | 5) +#define PINMUX_GPIO76__FUNC_AGPS_SYNC (MTK_PIN_NO(76) | 6) + +#define PINMUX_GPIO77__FUNC_GPIO77 (MTK_PIN_NO(77) | 0) +#define PINMUX_GPIO77__FUNC_MSDC1_CLK (MTK_PIN_NO(77) | 1) +#define PINMUX_GPIO77__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(77) | 2) +#define PINMUX_GPIO77__FUNC_UDI_TCK (MTK_PIN_NO(77) | 3) +#define PINMUX_GPIO77__FUNC_CONN_DSP_JCK (MTK_PIN_NO(77) | 4) +#define PINMUX_GPIO77__FUNC_TSFDC_EN (MTK_PIN_NO(77) | 6) +#define PINMUX_GPIO77__FUNC_SSPM_JTAG_TCK_VCORE (MTK_PIN_NO(77) | 7) + +#define PINMUX_GPIO78__FUNC_GPIO78 (MTK_PIN_NO(78) | 0) +#define PINMUX_GPIO78__FUNC_MSDC1_CMD (MTK_PIN_NO(78) | 1) +#define PINMUX_GPIO78__FUNC_CONN_WF_MCU_AICE_TMSC (MTK_PIN_NO(78) | 2) +#define PINMUX_GPIO78__FUNC_UDI_TMS (MTK_PIN_NO(78) | 3) +#define PINMUX_GPIO78__FUNC_CONN_DSP_JMS (MTK_PIN_NO(78) | 4) +#define PINMUX_GPIO78__FUNC_TSFDC_VCO_RST (MTK_PIN_NO(78) | 6) +#define PINMUX_GPIO78__FUNC_SSPM_JTAG_TMS_VCORE (MTK_PIN_NO(78) | 7) + +#define PINMUX_GPIO79__FUNC_GPIO79 (MTK_PIN_NO(79) | 0) +#define PINMUX_GPIO79__FUNC_MSDC1_DAT0 (MTK_PIN_NO(79) | 1) +#define PINMUX_GPIO79__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(79) | 2) +#define PINMUX_GPIO79__FUNC_UDI_TDI (MTK_PIN_NO(79) | 3) +#define PINMUX_GPIO79__FUNC_CONN_DSP_JDI (MTK_PIN_NO(79) | 4) +#define PINMUX_GPIO79__FUNC_TSFDC_TSSEL2 (MTK_PIN_NO(79) | 6) +#define PINMUX_GPIO79__FUNC_SSPM_JTAG_TDI_VCORE (MTK_PIN_NO(79) | 7) + +#define PINMUX_GPIO80__FUNC_GPIO80 (MTK_PIN_NO(80) | 0) +#define PINMUX_GPIO80__FUNC_MSDC1_DAT1 (MTK_PIN_NO(80) | 1) +#define PINMUX_GPIO80__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(80) | 2) +#define PINMUX_GPIO80__FUNC_UDI_TDO (MTK_PIN_NO(80) | 3) +#define PINMUX_GPIO80__FUNC_CONN_DSP_JDO (MTK_PIN_NO(80) | 4) +#define PINMUX_GPIO80__FUNC_TSFDC_TSSEL1 (MTK_PIN_NO(80) | 6) +#define PINMUX_GPIO80__FUNC_SSPM_JTAG_TDO_VCORE (MTK_PIN_NO(80) | 7) + +#define PINMUX_GPIO81__FUNC_GPIO81 (MTK_PIN_NO(81) | 0) +#define PINMUX_GPIO81__FUNC_MSDC1_DAT2 (MTK_PIN_NO(81) | 1) +#define PINMUX_GPIO81__FUNC_CONN_WF_MCU_AICE_TCKC (MTK_PIN_NO(81) | 2) +#define PINMUX_GPIO81__FUNC_UDI_NTRST (MTK_PIN_NO(81) | 3) +#define PINMUX_GPIO81__FUNC_CONN_BGF_MCU_AICE_TCKC (MTK_PIN_NO(81) | 4) +#define PINMUX_GPIO81__FUNC_MIPI3_D_SDATA (MTK_PIN_NO(81) | 5) +#define PINMUX_GPIO81__FUNC_TSFDC_TSSEL0 (MTK_PIN_NO(81) | 6) +#define PINMUX_GPIO81__FUNC_SSPM_JTAG_TRSTN_VCORE (MTK_PIN_NO(81) | 7) + +#define PINMUX_GPIO82__FUNC_GPIO82 (MTK_PIN_NO(82) | 0) +#define PINMUX_GPIO82__FUNC_MSDC1_DAT3 (MTK_PIN_NO(82) | 1) +#define PINMUX_GPIO82__FUNC_CONN_BGF_MCU_AICE_TMSC (MTK_PIN_NO(82) | 3) +#define PINMUX_GPIO82__FUNC_CONN_DSP_JINTP (MTK_PIN_NO(82) | 4) +#define PINMUX_GPIO82__FUNC_MIPI3_D_SCLK (MTK_PIN_NO(82) | 5) +#define PINMUX_GPIO82__FUNC_TSFDC_RCK_SELB (MTK_PIN_NO(82) | 6) + +#define PINMUX_GPIO83__FUNC_GPIO83 (MTK_PIN_NO(83) | 0) +#define PINMUX_GPIO83__FUNC_MD1_SIM1_SCLK (MTK_PIN_NO(83) | 1) +#define PINMUX_GPIO83__FUNC_TSFDC_26M (MTK_PIN_NO(83) | 6) + +#define PINMUX_GPIO84__FUNC_GPIO84 (MTK_PIN_NO(84) | 0) +#define PINMUX_GPIO84__FUNC_MD1_SIM1_SRST (MTK_PIN_NO(84) | 1) +#define PINMUX_GPIO84__FUNC_SPM_JTAG_TCK_VCORE (MTK_PIN_NO(84) | 3) +#define PINMUX_GPIO84__FUNC_APU_JTAG_TCK (MTK_PIN_NO(84) | 4) +#define PINMUX_GPIO84__FUNC_TSFDC_SDO (MTK_PIN_NO(84) | 6) +#define PINMUX_GPIO84__FUNC_CONN_DSP_L5_JCK (MTK_PIN_NO(84) | 7) + +#define PINMUX_GPIO85__FUNC_GPIO85 (MTK_PIN_NO(85) | 0) +#define PINMUX_GPIO85__FUNC_MD1_SIM1_SIO (MTK_PIN_NO(85) | 1) +#define PINMUX_GPIO85__FUNC_SPM_JTAG_TRSTN_VCORE (MTK_PIN_NO(85) | 3) +#define PINMUX_GPIO85__FUNC_APU_JTAG_TRST (MTK_PIN_NO(85) | 4) +#define PINMUX_GPIO85__FUNC_TSFDC_FOUT (MTK_PIN_NO(85) | 6) +#define PINMUX_GPIO85__FUNC_CONN_DSP_L5_JINTP (MTK_PIN_NO(85) | 7) + +#define PINMUX_GPIO86__FUNC_GPIO86 (MTK_PIN_NO(86) | 0) +#define PINMUX_GPIO86__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(86) | 1) +#define PINMUX_GPIO86__FUNC_SPM_JTAG_TDI_VCORE (MTK_PIN_NO(86) | 3) +#define PINMUX_GPIO86__FUNC_APU_JTAG_TDI (MTK_PIN_NO(86) | 4) +#define PINMUX_GPIO86__FUNC_TSFDC_SCK (MTK_PIN_NO(86) | 6) +#define PINMUX_GPIO86__FUNC_CONN_DSP_L5_JDI (MTK_PIN_NO(86) | 7) + +#define PINMUX_GPIO87__FUNC_GPIO87 (MTK_PIN_NO(87) | 0) +#define PINMUX_GPIO87__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(87) | 1) +#define PINMUX_GPIO87__FUNC_SPM_JTAG_TMS_VCORE (MTK_PIN_NO(87) | 3) +#define PINMUX_GPIO87__FUNC_APU_JTAG_TMS (MTK_PIN_NO(87) | 4) +#define PINMUX_GPIO87__FUNC_TSFDC_SDI (MTK_PIN_NO(87) | 6) +#define PINMUX_GPIO87__FUNC_CONN_DSP_L5_JMS (MTK_PIN_NO(87) | 7) + +#define PINMUX_GPIO88__FUNC_GPIO88 (MTK_PIN_NO(88) | 0) +#define PINMUX_GPIO88__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(88) | 1) +#define PINMUX_GPIO88__FUNC_SPM_JTAG_TDO_VCORE (MTK_PIN_NO(88) | 3) +#define PINMUX_GPIO88__FUNC_APU_JTAG_TDO (MTK_PIN_NO(88) | 4) +#define PINMUX_GPIO88__FUNC_TSFDC_SCF (MTK_PIN_NO(88) | 6) +#define PINMUX_GPIO88__FUNC_CONN_DSP_L5_JDO (MTK_PIN_NO(88) | 7) + +#define PINMUX_GPIO89__FUNC_GPIO89 (MTK_PIN_NO(89) | 0) +#define PINMUX_GPIO89__FUNC_DSI_TE (MTK_PIN_NO(89) | 1) +#define PINMUX_GPIO89__FUNC_DBG_MON_B8 (MTK_PIN_NO(89) | 7) + +#define PINMUX_GPIO90__FUNC_GPIO90 (MTK_PIN_NO(90) | 0) +#define PINMUX_GPIO90__FUNC_LCM_RST (MTK_PIN_NO(90) | 1) +#define PINMUX_GPIO90__FUNC_DBG_MON_B9 (MTK_PIN_NO(90) | 7) + +#define PINMUX_GPIO91__FUNC_GPIO91 (MTK_PIN_NO(91) | 0) +#define PINMUX_GPIO91__FUNC_DISP_PWM (MTK_PIN_NO(91) | 1) +#define PINMUX_GPIO91__FUNC_DBG_MON_B10 (MTK_PIN_NO(91) | 7) + +#define PINMUX_GPIO92__FUNC_GPIO92 (MTK_PIN_NO(92) | 0) +#define PINMUX_GPIO92__FUNC_CMMCLK0 (MTK_PIN_NO(92) | 1) +#define PINMUX_GPIO92__FUNC_DBG_MON_A23 (MTK_PIN_NO(92) | 7) + +#define PINMUX_GPIO93__FUNC_GPIO93 (MTK_PIN_NO(93) | 0) +#define PINMUX_GPIO93__FUNC_CMMCLK1 (MTK_PIN_NO(93) | 1) +#define PINMUX_GPIO93__FUNC_DBG_MON_A24 (MTK_PIN_NO(93) | 7) + +#define PINMUX_GPIO94__FUNC_GPIO94 (MTK_PIN_NO(94) | 0) +#define PINMUX_GPIO94__FUNC_CMMCLK2 (MTK_PIN_NO(94) | 1) +#define PINMUX_GPIO94__FUNC_DBG_MON_A25 (MTK_PIN_NO(94) | 7) + +#define PINMUX_GPIO95__FUNC_GPIO95 (MTK_PIN_NO(95) | 0) +#define PINMUX_GPIO95__FUNC_CMMCLK3 (MTK_PIN_NO(95) | 1) +#define PINMUX_GPIO95__FUNC_MD32_1_TXD (MTK_PIN_NO(95) | 5) +#define PINMUX_GPIO95__FUNC_PTA_TXD (MTK_PIN_NO(95) | 6) +#define PINMUX_GPIO95__FUNC_DBG_MON_A26 (MTK_PIN_NO(95) | 7) + +#define PINMUX_GPIO96__FUNC_GPIO96 (MTK_PIN_NO(96) | 0) +#define PINMUX_GPIO96__FUNC_CMMCLK4 (MTK_PIN_NO(96) | 1) +#define PINMUX_GPIO96__FUNC_MD32_1_RXD (MTK_PIN_NO(96) | 5) +#define PINMUX_GPIO96__FUNC_PTA_RXD (MTK_PIN_NO(96) | 6) +#define PINMUX_GPIO96__FUNC_DBG_MON_A27 (MTK_PIN_NO(96) | 7) + +#define PINMUX_GPIO97__FUNC_GPIO97 (MTK_PIN_NO(97) | 0) +#define PINMUX_GPIO97__FUNC_MD_UCNT_A_TGL (MTK_PIN_NO(97) | 1) + +#define PINMUX_GPIO98__FUNC_GPIO98 (MTK_PIN_NO(98) | 0) +#define PINMUX_GPIO98__FUNC_DIGRF_IRQ (MTK_PIN_NO(98) | 1) + +#define PINMUX_GPIO99__FUNC_GPIO99 (MTK_PIN_NO(99) | 0) +#define PINMUX_GPIO99__FUNC_BPI_BUS0 (MTK_PIN_NO(99) | 1) +#define PINMUX_GPIO99__FUNC_MFG_TSFDC_EN (MTK_PIN_NO(99) | 4) +#define PINMUX_GPIO99__FUNC_ANT_SEL0 (MTK_PIN_NO(99) | 6) +#define PINMUX_GPIO99__FUNC_DBG_MON_B11 (MTK_PIN_NO(99) | 7) + +#define PINMUX_GPIO100__FUNC_GPIO100 (MTK_PIN_NO(100) | 0) +#define PINMUX_GPIO100__FUNC_BPI_BUS1 (MTK_PIN_NO(100) | 1) +#define PINMUX_GPIO100__FUNC_MFG_TSFDC_VCO_RST (MTK_PIN_NO(100) | 4) +#define PINMUX_GPIO100__FUNC_ANT_SEL1 (MTK_PIN_NO(100) | 6) +#define PINMUX_GPIO100__FUNC_DBG_MON_B12 (MTK_PIN_NO(100) | 7) + +#define PINMUX_GPIO101__FUNC_GPIO101 (MTK_PIN_NO(101) | 0) +#define PINMUX_GPIO101__FUNC_BPI_BUS2 (MTK_PIN_NO(101) | 1) +#define PINMUX_GPIO101__FUNC_DMIC1_CLK (MTK_PIN_NO(101) | 3) +#define PINMUX_GPIO101__FUNC_MFG_TSFDC_TSSEL2 (MTK_PIN_NO(101) | 4) +#define PINMUX_GPIO101__FUNC_ANT_SEL2 (MTK_PIN_NO(101) | 6) +#define PINMUX_GPIO101__FUNC_DBG_MON_B13 (MTK_PIN_NO(101) | 7) + +#define PINMUX_GPIO102__FUNC_GPIO102 (MTK_PIN_NO(102) | 0) +#define PINMUX_GPIO102__FUNC_BPI_BUS3 (MTK_PIN_NO(102) | 1) +#define PINMUX_GPIO102__FUNC_DMIC1_DAT (MTK_PIN_NO(102) | 3) +#define PINMUX_GPIO102__FUNC_MFG_TSFDC_TSSEL1 (MTK_PIN_NO(102) | 4) +#define PINMUX_GPIO102__FUNC_ANT_SEL3 (MTK_PIN_NO(102) | 6) +#define PINMUX_GPIO102__FUNC_DBG_MON_B14 (MTK_PIN_NO(102) | 7) + +#define PINMUX_GPIO103__FUNC_GPIO103 (MTK_PIN_NO(103) | 0) +#define PINMUX_GPIO103__FUNC_BPI_BUS4 (MTK_PIN_NO(103) | 1) +#define PINMUX_GPIO103__FUNC_MFG_TSFDC_TSSEL0 (MTK_PIN_NO(103) | 4) +#define PINMUX_GPIO103__FUNC_ANT_SEL4 (MTK_PIN_NO(103) | 6) +#define PINMUX_GPIO103__FUNC_DBG_MON_B15 (MTK_PIN_NO(103) | 7) + +#define PINMUX_GPIO104__FUNC_GPIO104 (MTK_PIN_NO(104) | 0) +#define PINMUX_GPIO104__FUNC_BPI_BUS5 (MTK_PIN_NO(104) | 1) +#define PINMUX_GPIO104__FUNC_MFG_TSFDC_RCK_SELB (MTK_PIN_NO(104) | 4) +#define PINMUX_GPIO104__FUNC_ANT_SEL5 (MTK_PIN_NO(104) | 6) +#define PINMUX_GPIO104__FUNC_DBG_MON_B16 (MTK_PIN_NO(104) | 7) + +#define PINMUX_GPIO105__FUNC_GPIO105 (MTK_PIN_NO(105) | 0) +#define PINMUX_GPIO105__FUNC_BPI_BUS6 (MTK_PIN_NO(105) | 1) +#define PINMUX_GPIO105__FUNC_CONN_BPI_BUS6 (MTK_PIN_NO(105) | 2) +#define PINMUX_GPIO105__FUNC_ANT_SEL6 (MTK_PIN_NO(105) | 6) +#define PINMUX_GPIO105__FUNC_DBG_MON_B17 (MTK_PIN_NO(105) | 7) + +#define PINMUX_GPIO106__FUNC_GPIO106 (MTK_PIN_NO(106) | 0) +#define PINMUX_GPIO106__FUNC_BPI_BUS7 (MTK_PIN_NO(106) | 1) +#define PINMUX_GPIO106__FUNC_CONN_BPI_BUS7 (MTK_PIN_NO(106) | 2) +#define PINMUX_GPIO106__FUNC_MFG_TSFDC_SDO (MTK_PIN_NO(106) | 4) +#define PINMUX_GPIO106__FUNC_AUD_DAC_26M_CLK (MTK_PIN_NO(106) | 5) +#define PINMUX_GPIO106__FUNC_ANT_SEL7 (MTK_PIN_NO(106) | 6) +#define PINMUX_GPIO106__FUNC_DBG_MON_B18 (MTK_PIN_NO(106) | 7) + +#define PINMUX_GPIO107__FUNC_GPIO107 (MTK_PIN_NO(107) | 0) +#define PINMUX_GPIO107__FUNC_BPI_BUS8 (MTK_PIN_NO(107) | 1) +#define PINMUX_GPIO107__FUNC_CONN_BPI_BUS8 (MTK_PIN_NO(107) | 2) +#define PINMUX_GPIO107__FUNC_MFG_TSFDC_FOUT (MTK_PIN_NO(107) | 4) +#define PINMUX_GPIO107__FUNC_I2SOUT4_DATA0 (MTK_PIN_NO(107) | 5) +#define PINMUX_GPIO107__FUNC_ANT_SEL8 (MTK_PIN_NO(107) | 6) +#define PINMUX_GPIO107__FUNC_DBG_MON_B19 (MTK_PIN_NO(107) | 7) + +#define PINMUX_GPIO108__FUNC_GPIO108 (MTK_PIN_NO(108) | 0) +#define PINMUX_GPIO108__FUNC_BPI_BUS9 (MTK_PIN_NO(108) | 1) +#define PINMUX_GPIO108__FUNC_CONN_BPI_BUS9 (MTK_PIN_NO(108) | 2) +#define PINMUX_GPIO108__FUNC_I2SOUT4_DATA1 (MTK_PIN_NO(108) | 5) +#define PINMUX_GPIO108__FUNC_ANT_SEL9 (MTK_PIN_NO(108) | 6) +#define PINMUX_GPIO108__FUNC_DBG_MON_B20 (MTK_PIN_NO(108) | 7) + +#define PINMUX_GPIO109__FUNC_GPIO109 (MTK_PIN_NO(109) | 0) +#define PINMUX_GPIO109__FUNC_BPI_BUS10 (MTK_PIN_NO(109) | 1) +#define PINMUX_GPIO109__FUNC_CONN_BPI_BUS10 (MTK_PIN_NO(109) | 2) +#define PINMUX_GPIO109__FUNC_I2SOUT4_DATA2 (MTK_PIN_NO(109) | 5) +#define PINMUX_GPIO109__FUNC_ANT_SEL10 (MTK_PIN_NO(109) | 6) +#define PINMUX_GPIO109__FUNC_DBG_MON_B21 (MTK_PIN_NO(109) | 7) + +#define PINMUX_GPIO110__FUNC_GPIO110 (MTK_PIN_NO(110) | 0) +#define PINMUX_GPIO110__FUNC_BPI_BUS11 (MTK_PIN_NO(110) | 1) +#define PINMUX_GPIO110__FUNC_CONN_BPI_BUS11_OLAT0 (MTK_PIN_NO(110) | 2) +#define PINMUX_GPIO110__FUNC_I2SOUT4_DATA3 (MTK_PIN_NO(110) | 5) +#define PINMUX_GPIO110__FUNC_ANT_SEL11 (MTK_PIN_NO(110) | 6) +#define PINMUX_GPIO110__FUNC_DBG_MON_B22 (MTK_PIN_NO(110) | 7) + +#define PINMUX_GPIO111__FUNC_GPIO111 (MTK_PIN_NO(111) | 0) +#define PINMUX_GPIO111__FUNC_BPI_BUS12 (MTK_PIN_NO(111) | 1) +#define PINMUX_GPIO111__FUNC_CONN_BPI_BUS12_OLAT1 (MTK_PIN_NO(111) | 2) +#define PINMUX_GPIO111__FUNC_CLKM0 (MTK_PIN_NO(111) | 3) +#define PINMUX_GPIO111__FUNC_I2SIN4_BCK (MTK_PIN_NO(111) | 5) +#define PINMUX_GPIO111__FUNC_ANT_SEL12 (MTK_PIN_NO(111) | 6) +#define PINMUX_GPIO111__FUNC_DBG_MON_B23 (MTK_PIN_NO(111) | 7) + +#define PINMUX_GPIO112__FUNC_GPIO112 (MTK_PIN_NO(112) | 0) +#define PINMUX_GPIO112__FUNC_BPI_BUS13 (MTK_PIN_NO(112) | 1) +#define PINMUX_GPIO112__FUNC_CONN_BPI_BUS13_OLAT2 (MTK_PIN_NO(112) | 2) +#define PINMUX_GPIO112__FUNC_CLKM1 (MTK_PIN_NO(112) | 3) +#define PINMUX_GPIO112__FUNC_I2SIN4_DATA0 (MTK_PIN_NO(112) | 5) +#define PINMUX_GPIO112__FUNC_ANT_SEL13 (MTK_PIN_NO(112) | 6) +#define PINMUX_GPIO112__FUNC_DBG_MON_B24 (MTK_PIN_NO(112) | 7) + +#define PINMUX_GPIO113__FUNC_GPIO113 (MTK_PIN_NO(113) | 0) +#define PINMUX_GPIO113__FUNC_BPI_BUS14 (MTK_PIN_NO(113) | 1) +#define PINMUX_GPIO113__FUNC_CONN_BPI_BUS14_OLAT3 (MTK_PIN_NO(113) | 2) +#define PINMUX_GPIO113__FUNC_CLKM2 (MTK_PIN_NO(113) | 3) +#define PINMUX_GPIO113__FUNC_I2SIN4_DATA1 (MTK_PIN_NO(113) | 5) +#define PINMUX_GPIO113__FUNC_ANT_SEL14 (MTK_PIN_NO(113) | 6) +#define PINMUX_GPIO113__FUNC_DBG_MON_B25 (MTK_PIN_NO(113) | 7) + +#define PINMUX_GPIO114__FUNC_GPIO114 (MTK_PIN_NO(114) | 0) +#define PINMUX_GPIO114__FUNC_BPI_BUS15 (MTK_PIN_NO(114) | 1) +#define PINMUX_GPIO114__FUNC_CONN_BPI_BUS15_OLAT4 (MTK_PIN_NO(114) | 2) +#define PINMUX_GPIO114__FUNC_CLKM3 (MTK_PIN_NO(114) | 3) +#define PINMUX_GPIO114__FUNC_I2SIN4_DATA2 (MTK_PIN_NO(114) | 5) +#define PINMUX_GPIO114__FUNC_ANT_SEL15 (MTK_PIN_NO(114) | 6) +#define PINMUX_GPIO114__FUNC_DBG_MON_B26 (MTK_PIN_NO(114) | 7) + +#define PINMUX_GPIO115__FUNC_GPIO115 (MTK_PIN_NO(115) | 0) +#define PINMUX_GPIO115__FUNC_BPI_BUS16 (MTK_PIN_NO(115) | 1) +#define PINMUX_GPIO115__FUNC_CONN_BPI_BUS16_OLAT5 (MTK_PIN_NO(115) | 2) +#define PINMUX_GPIO115__FUNC_I2SIN4_DATA3 (MTK_PIN_NO(115) | 5) +#define PINMUX_GPIO115__FUNC_ANT_SEL16 (MTK_PIN_NO(115) | 6) +#define PINMUX_GPIO115__FUNC_DBG_MON_B27 (MTK_PIN_NO(115) | 7) + +#define PINMUX_GPIO116__FUNC_GPIO116 (MTK_PIN_NO(116) | 0) +#define PINMUX_GPIO116__FUNC_BPI_BUS17 (MTK_PIN_NO(116) | 1) +#define PINMUX_GPIO116__FUNC_CONN_BPI_BUS17_ANT0 (MTK_PIN_NO(116) | 2) +#define PINMUX_GPIO116__FUNC_I2SIN4_LRCK (MTK_PIN_NO(116) | 5) +#define PINMUX_GPIO116__FUNC_ANT_SEL17 (MTK_PIN_NO(116) | 6) +#define PINMUX_GPIO116__FUNC_DBG_MON_B28 (MTK_PIN_NO(116) | 7) + +#define PINMUX_GPIO117__FUNC_GPIO117 (MTK_PIN_NO(117) | 0) +#define PINMUX_GPIO117__FUNC_MIPI0_D_SCLK (MTK_PIN_NO(117) | 1) +#define PINMUX_GPIO117__FUNC_CONN_MIPI0_SCLK (MTK_PIN_NO(117) | 2) +#define PINMUX_GPIO117__FUNC_BPI_BUS18 (MTK_PIN_NO(117) | 3) +#define PINMUX_GPIO117__FUNC_ANT_SEL18 (MTK_PIN_NO(117) | 6) + +#define PINMUX_GPIO118__FUNC_GPIO118 (MTK_PIN_NO(118) | 0) +#define PINMUX_GPIO118__FUNC_MIPI0_D_SDATA (MTK_PIN_NO(118) | 1) +#define PINMUX_GPIO118__FUNC_CONN_MIPI0_SDATA (MTK_PIN_NO(118) | 2) +#define PINMUX_GPIO118__FUNC_BPI_BUS19 (MTK_PIN_NO(118) | 3) +#define PINMUX_GPIO118__FUNC_ANT_SEL19 (MTK_PIN_NO(118) | 6) + +#define PINMUX_GPIO119__FUNC_GPIO119 (MTK_PIN_NO(119) | 0) +#define PINMUX_GPIO119__FUNC_MIPI1_D_SCLK (MTK_PIN_NO(119) | 1) +#define PINMUX_GPIO119__FUNC_CONN_MIPI1_SCLK (MTK_PIN_NO(119) | 2) +#define PINMUX_GPIO119__FUNC_BPI_BUS20 (MTK_PIN_NO(119) | 3) +#define PINMUX_GPIO119__FUNC_ANT_SEL20 (MTK_PIN_NO(119) | 6) + +#define PINMUX_GPIO120__FUNC_GPIO120 (MTK_PIN_NO(120) | 0) +#define PINMUX_GPIO120__FUNC_MIPI1_D_SDATA (MTK_PIN_NO(120) | 1) +#define PINMUX_GPIO120__FUNC_CONN_MIPI1_SDATA (MTK_PIN_NO(120) | 2) +#define PINMUX_GPIO120__FUNC_BPI_BUS21 (MTK_PIN_NO(120) | 3) +#define PINMUX_GPIO120__FUNC_ANT_SEL21 (MTK_PIN_NO(120) | 6) + +#define PINMUX_GPIO121__FUNC_GPIO121 (MTK_PIN_NO(121) | 0) +#define PINMUX_GPIO121__FUNC_MIPI2_D_SCLK (MTK_PIN_NO(121) | 1) +#define PINMUX_GPIO121__FUNC_MIPI4_D_SCLK (MTK_PIN_NO(121) | 2) +#define PINMUX_GPIO121__FUNC_BPI_BUS22 (MTK_PIN_NO(121) | 3) +#define PINMUX_GPIO121__FUNC_MD_GPS_L1_BLANK (MTK_PIN_NO(121) | 6) + +#define PINMUX_GPIO122__FUNC_GPIO122 (MTK_PIN_NO(122) | 0) +#define PINMUX_GPIO122__FUNC_MIPI2_D_SDATA (MTK_PIN_NO(122) | 1) +#define PINMUX_GPIO122__FUNC_MIPI4_D_SDATA (MTK_PIN_NO(122) | 2) +#define PINMUX_GPIO122__FUNC_BPI_BUS23 (MTK_PIN_NO(122) | 3) +#define PINMUX_GPIO122__FUNC_MD_GPS_L5_BLANK (MTK_PIN_NO(122) | 6) + +#define PINMUX_GPIO123__FUNC_GPIO123 (MTK_PIN_NO(123) | 0) +#define PINMUX_GPIO123__FUNC_MIPI_M_SCLK (MTK_PIN_NO(123) | 1) + +#define PINMUX_GPIO124__FUNC_GPIO124 (MTK_PIN_NO(124) | 0) +#define PINMUX_GPIO124__FUNC_MIPI_M_SDATA (MTK_PIN_NO(124) | 1) + +#define PINMUX_GPIO125__FUNC_GPIO125 (MTK_PIN_NO(125) | 0) +#define PINMUX_GPIO125__FUNC_SCL0 (MTK_PIN_NO(125) | 1) +#define PINMUX_GPIO125__FUNC_SCP_SCL4 (MTK_PIN_NO(125) | 2) +#define PINMUX_GPIO125__FUNC_TP_UTXD2_VLP (MTK_PIN_NO(125) | 3) +#define PINMUX_GPIO125__FUNC_TP_UCTS1_VLP (MTK_PIN_NO(125) | 4) +#define PINMUX_GPIO125__FUNC_TP_GPIO4_AO (MTK_PIN_NO(125) | 5) +#define PINMUX_GPIO125__FUNC_UTXD2 (MTK_PIN_NO(125) | 6) + +#define PINMUX_GPIO126__FUNC_GPIO126 (MTK_PIN_NO(126) | 0) +#define PINMUX_GPIO126__FUNC_SDA0 (MTK_PIN_NO(126) | 1) +#define PINMUX_GPIO126__FUNC_SCP_SDA4 (MTK_PIN_NO(126) | 2) +#define PINMUX_GPIO126__FUNC_TP_URXD2_VLP (MTK_PIN_NO(126) | 3) +#define PINMUX_GPIO126__FUNC_TP_URTS1_VLP (MTK_PIN_NO(126) | 4) +#define PINMUX_GPIO126__FUNC_TP_GPIO5_AO (MTK_PIN_NO(126) | 5) +#define PINMUX_GPIO126__FUNC_URXD2 (MTK_PIN_NO(126) | 6) + +#define PINMUX_GPIO127__FUNC_GPIO127 (MTK_PIN_NO(127) | 0) +#define PINMUX_GPIO127__FUNC_SCL1 (MTK_PIN_NO(127) | 1) +#define PINMUX_GPIO127__FUNC_SCP_SCL5 (MTK_PIN_NO(127) | 2) +#define PINMUX_GPIO127__FUNC_TP_UCTS2_VLP (MTK_PIN_NO(127) | 3) +#define PINMUX_GPIO127__FUNC_TP_UTXD1_VLP (MTK_PIN_NO(127) | 4) +#define PINMUX_GPIO127__FUNC_TP_GPIO6_AO (MTK_PIN_NO(127) | 5) +#define PINMUX_GPIO127__FUNC_MD_MCIF_UTXD0 (MTK_PIN_NO(127) | 6) + +#define PINMUX_GPIO128__FUNC_GPIO128 (MTK_PIN_NO(128) | 0) +#define PINMUX_GPIO128__FUNC_SDA1 (MTK_PIN_NO(128) | 1) +#define PINMUX_GPIO128__FUNC_SCP_SDA5 (MTK_PIN_NO(128) | 2) +#define PINMUX_GPIO128__FUNC_TP_URTS2_VLP (MTK_PIN_NO(128) | 3) +#define PINMUX_GPIO128__FUNC_TP_URXD1_VLP (MTK_PIN_NO(128) | 4) +#define PINMUX_GPIO128__FUNC_TP_GPIO7_AO (MTK_PIN_NO(128) | 5) +#define PINMUX_GPIO128__FUNC_MD_MCIF_URXD0 (MTK_PIN_NO(128) | 6) + +#define PINMUX_GPIO129__FUNC_GPIO129 (MTK_PIN_NO(129) | 0) +#define PINMUX_GPIO129__FUNC_SCL2 (MTK_PIN_NO(129) | 1) + +#define PINMUX_GPIO130__FUNC_GPIO130 (MTK_PIN_NO(130) | 0) +#define PINMUX_GPIO130__FUNC_SDA2 (MTK_PIN_NO(130) | 1) + +#define PINMUX_GPIO131__FUNC_GPIO131 (MTK_PIN_NO(131) | 0) +#define PINMUX_GPIO131__FUNC_SCL3 (MTK_PIN_NO(131) | 1) +#define PINMUX_GPIO131__FUNC_TP_UTXD2_VCORE (MTK_PIN_NO(131) | 3) +#define PINMUX_GPIO131__FUNC_SSPM_UTXD_AO_VCORE (MTK_PIN_NO(131) | 6) + +#define PINMUX_GPIO132__FUNC_GPIO132 (MTK_PIN_NO(132) | 0) +#define PINMUX_GPIO132__FUNC_SDA3 (MTK_PIN_NO(132) | 1) +#define PINMUX_GPIO132__FUNC_TP_URXD2_VCORE (MTK_PIN_NO(132) | 3) +#define PINMUX_GPIO132__FUNC_SSPM_URXD_AO_VCORE (MTK_PIN_NO(132) | 6) + +#define PINMUX_GPIO133__FUNC_GPIO133 (MTK_PIN_NO(133) | 0) +#define PINMUX_GPIO133__FUNC_SCL4 (MTK_PIN_NO(133) | 1) + +#define PINMUX_GPIO134__FUNC_GPIO134 (MTK_PIN_NO(134) | 0) +#define PINMUX_GPIO134__FUNC_SDA4 (MTK_PIN_NO(134) | 1) + +#define PINMUX_GPIO135__FUNC_GPIO135 (MTK_PIN_NO(135) | 0) +#define PINMUX_GPIO135__FUNC_SCL5 (MTK_PIN_NO(135) | 1) + +#define PINMUX_GPIO136__FUNC_GPIO136 (MTK_PIN_NO(136) | 0) +#define PINMUX_GPIO136__FUNC_SDA5 (MTK_PIN_NO(136) | 1) + +#define PINMUX_GPIO137__FUNC_GPIO137 (MTK_PIN_NO(137) | 0) +#define PINMUX_GPIO137__FUNC_SCL6 (MTK_PIN_NO(137) | 1) + +#define PINMUX_GPIO138__FUNC_GPIO138 (MTK_PIN_NO(138) | 0) +#define PINMUX_GPIO138__FUNC_SDA6 (MTK_PIN_NO(138) | 1) + +#define PINMUX_GPIO139__FUNC_GPIO139 (MTK_PIN_NO(139) | 0) +#define PINMUX_GPIO139__FUNC_SCL7 (MTK_PIN_NO(139) | 1) +#define PINMUX_GPIO139__FUNC_TP_UTXD1_VCORE (MTK_PIN_NO(139) | 3) +#define PINMUX_GPIO139__FUNC_MD_UTXD0 (MTK_PIN_NO(139) | 4) +#define PINMUX_GPIO139__FUNC_UTXD1 (MTK_PIN_NO(139) | 6) + +#define PINMUX_GPIO140__FUNC_GPIO140 (MTK_PIN_NO(140) | 0) +#define PINMUX_GPIO140__FUNC_SDA7 (MTK_PIN_NO(140) | 1) +#define PINMUX_GPIO140__FUNC_TP_URXD1_VCORE (MTK_PIN_NO(140) | 3) +#define PINMUX_GPIO140__FUNC_MD_URXD0 (MTK_PIN_NO(140) | 4) +#define PINMUX_GPIO140__FUNC_URXD1 (MTK_PIN_NO(140) | 6) + +#define PINMUX_GPIO141__FUNC_GPIO141 (MTK_PIN_NO(141) | 0) +#define PINMUX_GPIO141__FUNC_SCL8 (MTK_PIN_NO(141) | 1) + +#define PINMUX_GPIO142__FUNC_GPIO142 (MTK_PIN_NO(142) | 0) +#define PINMUX_GPIO142__FUNC_SDA8 (MTK_PIN_NO(142) | 1) + +#define PINMUX_GPIO143__FUNC_GPIO143 (MTK_PIN_NO(143) | 0) +#define PINMUX_GPIO143__FUNC_SCL9 (MTK_PIN_NO(143) | 1) +#define PINMUX_GPIO143__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(143) | 2) +#define PINMUX_GPIO143__FUNC_HFRP_UTXD1 (MTK_PIN_NO(143) | 3) +#define PINMUX_GPIO143__FUNC_CONN_BGF_MCU_AICE_TMSC (MTK_PIN_NO(143) | 4) +#define PINMUX_GPIO143__FUNC_CONN_WF_MCU_AICE_TMSC (MTK_PIN_NO(143) | 5) +#define PINMUX_GPIO143__FUNC_MBISTREADEN_TRIGGER (MTK_PIN_NO(143) | 7) + +#define PINMUX_GPIO144__FUNC_GPIO144 (MTK_PIN_NO(144) | 0) +#define PINMUX_GPIO144__FUNC_SDA9 (MTK_PIN_NO(144) | 1) +#define PINMUX_GPIO144__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(144) | 2) +#define PINMUX_GPIO144__FUNC_HFRP_URXD1 (MTK_PIN_NO(144) | 3) +#define PINMUX_GPIO144__FUNC_CONN_BGF_MCU_AICE_TCKC (MTK_PIN_NO(144) | 4) +#define PINMUX_GPIO144__FUNC_CONN_WF_MCU_AICE_TCKC (MTK_PIN_NO(144) | 5) +#define PINMUX_GPIO144__FUNC_MBISTWRITEEN_TRIGGER (MTK_PIN_NO(144) | 7) + +#define PINMUX_GPIO145__FUNC_GPIO145 (MTK_PIN_NO(145) | 0) +#define PINMUX_GPIO145__FUNC_SCL10 (MTK_PIN_NO(145) | 1) +#define PINMUX_GPIO145__FUNC_SCP_SCL0 (MTK_PIN_NO(145) | 2) +#define PINMUX_GPIO145__FUNC_TP_GPIO8_AO (MTK_PIN_NO(145) | 5) + +#define PINMUX_GPIO146__FUNC_GPIO146 (MTK_PIN_NO(146) | 0) +#define PINMUX_GPIO146__FUNC_SDA10 (MTK_PIN_NO(146) | 1) +#define PINMUX_GPIO146__FUNC_SCP_SDA0 (MTK_PIN_NO(146) | 2) +#define PINMUX_GPIO146__FUNC_TP_GPIO9_AO (MTK_PIN_NO(146) | 5) + +#define PINMUX_GPIO147__FUNC_GPIO147 (MTK_PIN_NO(147) | 0) +#define PINMUX_GPIO147__FUNC_SCL11 (MTK_PIN_NO(147) | 1) +#define PINMUX_GPIO147__FUNC_SCP_SCL1 (MTK_PIN_NO(147) | 2) +#define PINMUX_GPIO147__FUNC_SCP_DMIC_CLK (MTK_PIN_NO(147) | 3) +#define PINMUX_GPIO147__FUNC_DMIC_CLK (MTK_PIN_NO(147) | 4) +#define PINMUX_GPIO147__FUNC_TP_GPIO10_AO (MTK_PIN_NO(147) | 5) +#define PINMUX_GPIO147__FUNC_EXTIF0_PRI (MTK_PIN_NO(147) | 6) + +#define PINMUX_GPIO148__FUNC_GPIO148 (MTK_PIN_NO(148) | 0) +#define PINMUX_GPIO148__FUNC_SDA11 (MTK_PIN_NO(148) | 1) +#define PINMUX_GPIO148__FUNC_SCP_SDA1 (MTK_PIN_NO(148) | 2) +#define PINMUX_GPIO148__FUNC_SCP_DMIC_DAT (MTK_PIN_NO(148) | 3) +#define PINMUX_GPIO148__FUNC_DMIC_DAT (MTK_PIN_NO(148) | 4) +#define PINMUX_GPIO148__FUNC_TP_GPIO11_AO (MTK_PIN_NO(148) | 5) +#define PINMUX_GPIO148__FUNC_EXTIF0_GNT_B (MTK_PIN_NO(148) | 6) + +#define PINMUX_GPIO149__FUNC_GPIO149 (MTK_PIN_NO(149) | 0) +#define PINMUX_GPIO149__FUNC_KPROW2 (MTK_PIN_NO(149) | 1) +#define PINMUX_GPIO149__FUNC_PWM_VLP (MTK_PIN_NO(149) | 2) +#define PINMUX_GPIO149__FUNC_MD_INT0 (MTK_PIN_NO(149) | 4) +#define PINMUX_GPIO149__FUNC_TP_GPIO12_AO (MTK_PIN_NO(149) | 5) +#define PINMUX_GPIO149__FUNC_SCL0 (MTK_PIN_NO(149) | 6) +#define PINMUX_GPIO149__FUNC_DBG_MON_A28 (MTK_PIN_NO(149) | 7) + +#define PINMUX_GPIO150__FUNC_GPIO150 (MTK_PIN_NO(150) | 0) +#define PINMUX_GPIO150__FUNC_KPCOL2 (MTK_PIN_NO(150) | 1) +#define PINMUX_GPIO150__FUNC_PWM_VLP (MTK_PIN_NO(150) | 2) +#define PINMUX_GPIO150__FUNC_CMMCLK5 (MTK_PIN_NO(150) | 3) +#define PINMUX_GPIO150__FUNC_MD_INT3 (MTK_PIN_NO(150) | 4) +#define PINMUX_GPIO150__FUNC_TP_GPIO13_AO (MTK_PIN_NO(150) | 5) +#define PINMUX_GPIO150__FUNC_SDA0 (MTK_PIN_NO(150) | 6) + +#define PINMUX_GPIO151__FUNC_GPIO151 (MTK_PIN_NO(151) | 0) +#define PINMUX_GPIO151__FUNC_SRCLKENAI0 (MTK_PIN_NO(151) | 1) +#define PINMUX_GPIO151__FUNC_MD_INT4 (MTK_PIN_NO(151) | 4) +#define PINMUX_GPIO151__FUNC_TP_GPIO14_AO (MTK_PIN_NO(151) | 5) +#define PINMUX_GPIO151__FUNC_DBG_MON_A29 (MTK_PIN_NO(151) | 7) + +#define PINMUX_GPIO152__FUNC_GPIO152 (MTK_PIN_NO(152) | 0) +#define PINMUX_GPIO152__FUNC_SRCLKENAI1 (MTK_PIN_NO(152) | 1) +#define PINMUX_GPIO152__FUNC_SPMI_M_TRIG_FLAG (MTK_PIN_NO(152) | 4) +#define PINMUX_GPIO152__FUNC_TP_GPIO15_AO (MTK_PIN_NO(152) | 5) +#define PINMUX_GPIO152__FUNC_DBG_MON_A30 (MTK_PIN_NO(152) | 7) + +#define PINMUX_GPIO153__FUNC_GPIO153 (MTK_PIN_NO(153) | 0) +#define PINMUX_GPIO153__FUNC_MD1_SIM2_SCLK (MTK_PIN_NO(153) | 1) +#define PINMUX_GPIO153__FUNC_DISP_PWM1 (MTK_PIN_NO(153) | 2) +#define PINMUX_GPIO153__FUNC_SPMI_P_TRIG_FLAG (MTK_PIN_NO(153) | 4) +#define PINMUX_GPIO153__FUNC_DBG_MON_A0 (MTK_PIN_NO(153) | 7) + +#define PINMUX_GPIO154__FUNC_GPIO154 (MTK_PIN_NO(154) | 0) +#define PINMUX_GPIO154__FUNC_MD1_SIM2_SRST (MTK_PIN_NO(154) | 1) +#define PINMUX_GPIO154__FUNC_LCM_RST1 (MTK_PIN_NO(154) | 2) +#define PINMUX_GPIO154__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(154) | 3) +#define PINMUX_GPIO154__FUNC_CMFLASH2 (MTK_PIN_NO(154) | 4) +#define PINMUX_GPIO154__FUNC_MBISTREADEN_TRIGGER (MTK_PIN_NO(154) | 5) +#define PINMUX_GPIO154__FUNC_DBG_MON_A1 (MTK_PIN_NO(154) | 7) + +#define PINMUX_GPIO155__FUNC_GPIO155 (MTK_PIN_NO(155) | 0) +#define PINMUX_GPIO155__FUNC_MD1_SIM2_SIO (MTK_PIN_NO(155) | 1) +#define PINMUX_GPIO155__FUNC_DSI_TE1 (MTK_PIN_NO(155) | 2) +#define PINMUX_GPIO155__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(155) | 3) +#define PINMUX_GPIO155__FUNC_CMFLASH3 (MTK_PIN_NO(155) | 4) +#define PINMUX_GPIO155__FUNC_MBISTWRITEEN_TRIGGER (MTK_PIN_NO(155) | 5) +#define PINMUX_GPIO155__FUNC_DBG_MON_A2 (MTK_PIN_NO(155) | 7) + +#define PINMUX_GPIO156__FUNC_GPIO156 (MTK_PIN_NO(156) | 0) +#define PINMUX_GPIO156__FUNC_SPMI_M_SCL (MTK_PIN_NO(156) | 1) + +#define PINMUX_GPIO157__FUNC_GPIO157 (MTK_PIN_NO(157) | 0) +#define PINMUX_GPIO157__FUNC_SPMI_M_SDA (MTK_PIN_NO(157) | 1) + +#define PINMUX_GPIO158__FUNC_GPIO158 (MTK_PIN_NO(158) | 0) +#define PINMUX_GPIO158__FUNC_SPMI_P_SCL (MTK_PIN_NO(158) | 1) + +#define PINMUX_GPIO159__FUNC_GPIO159 (MTK_PIN_NO(159) | 0) +#define PINMUX_GPIO159__FUNC_SPMI_P_SDA (MTK_PIN_NO(159) | 1) + +#define PINMUX_GPIO160__FUNC_GPIO160 (MTK_PIN_NO(160) | 0) +#define PINMUX_GPIO160__FUNC_SRCLKENA0 (MTK_PIN_NO(160) | 1) + +#define PINMUX_GPIO161__FUNC_GPIO161 (MTK_PIN_NO(161) | 0) +#define PINMUX_GPIO161__FUNC_SCP_VREQ_VAO (MTK_PIN_NO(161) | 1) + +#define PINMUX_GPIO162__FUNC_GPIO162 (MTK_PIN_NO(162) | 0) +#define PINMUX_GPIO162__FUNC_RTC32K_CK (MTK_PIN_NO(162) | 1) + +#define PINMUX_GPIO163__FUNC_GPIO163 (MTK_PIN_NO(163) | 0) +#define PINMUX_GPIO163__FUNC_WATCHDOG (MTK_PIN_NO(163) | 1) + +#define PINMUX_GPIO164__FUNC_GPIO164 (MTK_PIN_NO(164) | 0) +#define PINMUX_GPIO164__FUNC_AUD_CLK_MOSI (MTK_PIN_NO(164) | 1) +#define PINMUX_GPIO164__FUNC_AUD_CLK_MOSI_A (MTK_PIN_NO(164) | 3) + +#define PINMUX_GPIO165__FUNC_GPIO165 (MTK_PIN_NO(165) | 0) +#define PINMUX_GPIO165__FUNC_AUD_SYNC_MOSI (MTK_PIN_NO(165) | 1) + +#define PINMUX_GPIO166__FUNC_GPIO166 (MTK_PIN_NO(166) | 0) +#define PINMUX_GPIO166__FUNC_AUD_DAT_MOSI0 (MTK_PIN_NO(166) | 1) +#define PINMUX_GPIO166__FUNC_AUD_DAT_MOSI0_A (MTK_PIN_NO(166) | 3) + +#define PINMUX_GPIO167__FUNC_GPIO167 (MTK_PIN_NO(167) | 0) +#define PINMUX_GPIO167__FUNC_AUD_DAT_MOSI1 (MTK_PIN_NO(167) | 1) +#define PINMUX_GPIO167__FUNC_AUD_DAT_MOSI1_A (MTK_PIN_NO(167) | 3) + +#define PINMUX_GPIO168__FUNC_GPIO168 (MTK_PIN_NO(168) | 0) +#define PINMUX_GPIO168__FUNC_AUD_NLE_MOSI0 (MTK_PIN_NO(168) | 1) +#define PINMUX_GPIO168__FUNC_AUD_SYNC_MISO (MTK_PIN_NO(168) | 2) + +#define PINMUX_GPIO169__FUNC_GPIO169 (MTK_PIN_NO(169) | 0) +#define PINMUX_GPIO169__FUNC_AUD_NLE_MOSI1 (MTK_PIN_NO(169) | 1) +#define PINMUX_GPIO169__FUNC_AUD_CLK_MISO (MTK_PIN_NO(169) | 2) +#define PINMUX_GPIO169__FUNC_AUD_CLK_MISO_A (MTK_PIN_NO(169) | 3) + +#define PINMUX_GPIO170__FUNC_GPIO170 (MTK_PIN_NO(170) | 0) +#define PINMUX_GPIO170__FUNC_AUD_DAT_MISO0 (MTK_PIN_NO(170) | 1) +#define PINMUX_GPIO170__FUNC_VOW_DAT_MISO (MTK_PIN_NO(170) | 2) +#define PINMUX_GPIO170__FUNC_AUD_DAT_MISO0_A (MTK_PIN_NO(170) | 3) + +#define PINMUX_GPIO171__FUNC_GPIO171 (MTK_PIN_NO(171) | 0) +#define PINMUX_GPIO171__FUNC_AUD_DAT_MISO1 (MTK_PIN_NO(171) | 1) +#define PINMUX_GPIO171__FUNC_VOW_CLK_MISO (MTK_PIN_NO(171) | 2) +#define PINMUX_GPIO171__FUNC_AUD_DAT_MISO1_A (MTK_PIN_NO(171) | 3) + +#define PINMUX_GPIO172__FUNC_GPIO172 (MTK_PIN_NO(172) | 0) +#define PINMUX_GPIO172__FUNC_CONN_TOP_CLK (MTK_PIN_NO(172) | 1) +#define PINMUX_GPIO172__FUNC_DBG_MON_A31 (MTK_PIN_NO(172) | 7) + +#define PINMUX_GPIO173__FUNC_GPIO173 (MTK_PIN_NO(173) | 0) +#define PINMUX_GPIO173__FUNC_CONN_TOP_DATA (MTK_PIN_NO(173) | 1) + +#define PINMUX_GPIO174__FUNC_GPIO174 (MTK_PIN_NO(174) | 0) +#define PINMUX_GPIO174__FUNC_CONN_BT_CLK (MTK_PIN_NO(174) | 1) + +#define PINMUX_GPIO175__FUNC_GPIO175 (MTK_PIN_NO(175) | 0) +#define PINMUX_GPIO175__FUNC_CONN_BT_DATA (MTK_PIN_NO(175) | 1) + +#define PINMUX_GPIO176__FUNC_GPIO176 (MTK_PIN_NO(176) | 0) +#define PINMUX_GPIO176__FUNC_CONN_HRST_B (MTK_PIN_NO(176) | 1) + +#define PINMUX_GPIO177__FUNC_GPIO177 (MTK_PIN_NO(177) | 0) +#define PINMUX_GPIO177__FUNC_CONN_WB_PTA (MTK_PIN_NO(177) | 1) + +#define PINMUX_GPIO178__FUNC_GPIO178 (MTK_PIN_NO(178) | 0) +#define PINMUX_GPIO178__FUNC_CONN_WF_CTRL0 (MTK_PIN_NO(178) | 1) + +#define PINMUX_GPIO179__FUNC_GPIO179 (MTK_PIN_NO(179) | 0) +#define PINMUX_GPIO179__FUNC_CONN_WF_CTRL1 (MTK_PIN_NO(179) | 1) + +#define PINMUX_GPIO180__FUNC_GPIO180 (MTK_PIN_NO(180) | 0) +#define PINMUX_GPIO180__FUNC_CONN_WF_CTRL2 (MTK_PIN_NO(180) | 1) + +#define PINMUX_GPIO181__FUNC_GPIO181 (MTK_PIN_NO(181) | 0) +#define PINMUX_GPIO181__FUNC_CONN_WF_CTRL3 (MTK_PIN_NO(181) | 1) +#define PINMUX_GPIO181__FUNC_CONN_TOP_CLK_2 (MTK_PIN_NO(181) | 2) +#define PINMUX_GPIO181__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(181) | 3) + +#define PINMUX_GPIO182__FUNC_GPIO182 (MTK_PIN_NO(182) | 0) +#define PINMUX_GPIO182__FUNC_CONN_WF_CTRL4 (MTK_PIN_NO(182) | 1) +#define PINMUX_GPIO182__FUNC_CONN_TOP_DATA_2 (MTK_PIN_NO(182) | 2) +#define PINMUX_GPIO182__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(182) | 3) + +#define PINMUX_GPIO183__FUNC_GPIO183 (MTK_PIN_NO(183) | 0) +#define PINMUX_GPIO183__FUNC_CONN_HRST_B_2 (MTK_PIN_NO(183) | 1) + +#define PINMUX_GPIO184__FUNC_GPIO184 (MTK_PIN_NO(184) | 0) +#define PINMUX_GPIO184__FUNC_MSDC0_DSL (MTK_PIN_NO(184) | 1) +#define PINMUX_GPIO184__FUNC_ANT_SEL13 (MTK_PIN_NO(184) | 3) + +#define PINMUX_GPIO185__FUNC_GPIO185 (MTK_PIN_NO(185) | 0) +#define PINMUX_GPIO185__FUNC_MSDC0_CLK (MTK_PIN_NO(185) | 1) +#define PINMUX_GPIO185__FUNC_CONN_TCXOENA_REQ (MTK_PIN_NO(185) | 2) +#define PINMUX_GPIO185__FUNC_ANT_SEL14 (MTK_PIN_NO(185) | 3) + +#define PINMUX_GPIO186__FUNC_GPIO186 (MTK_PIN_NO(186) | 0) +#define PINMUX_GPIO186__FUNC_MSDC0_CMD (MTK_PIN_NO(186) | 1) +#define PINMUX_GPIO186__FUNC_GPS_L1_ELNA_EN (MTK_PIN_NO(186) | 2) +#define PINMUX_GPIO186__FUNC_ANT_SEL15 (MTK_PIN_NO(186) | 3) +#define PINMUX_GPIO186__FUNC_I2SOUT4_DATA0 (MTK_PIN_NO(186) | 5) + +#define PINMUX_GPIO187__FUNC_GPIO187 (MTK_PIN_NO(187) | 0) +#define PINMUX_GPIO187__FUNC_MSDC0_RSTB (MTK_PIN_NO(187) | 1) +#define PINMUX_GPIO187__FUNC_GPS_L5_ELNA_EN (MTK_PIN_NO(187) | 2) +#define PINMUX_GPIO187__FUNC_ANT_SEL16 (MTK_PIN_NO(187) | 3) +#define PINMUX_GPIO187__FUNC_I2SOUT4_DATA1 (MTK_PIN_NO(187) | 5) + +#define PINMUX_GPIO188__FUNC_GPIO188 (MTK_PIN_NO(188) | 0) +#define PINMUX_GPIO188__FUNC_MSDC0_DAT0 (MTK_PIN_NO(188) | 1) +#define PINMUX_GPIO188__FUNC_ANT_SEL17 (MTK_PIN_NO(188) | 3) +#define PINMUX_GPIO188__FUNC_I2SOUT4_DATA2 (MTK_PIN_NO(188) | 5) + +#define PINMUX_GPIO189__FUNC_GPIO189 (MTK_PIN_NO(189) | 0) +#define PINMUX_GPIO189__FUNC_MSDC0_DAT1 (MTK_PIN_NO(189) | 1) +#define PINMUX_GPIO189__FUNC_ANT_SEL18 (MTK_PIN_NO(189) | 3) +#define PINMUX_GPIO189__FUNC_I2SOUT4_DATA3 (MTK_PIN_NO(189) | 5) + +#define PINMUX_GPIO190__FUNC_GPIO190 (MTK_PIN_NO(190) | 0) +#define PINMUX_GPIO190__FUNC_MSDC0_DAT2 (MTK_PIN_NO(190) | 1) +#define PINMUX_GPIO190__FUNC_DMIC1_CLK (MTK_PIN_NO(190) | 2) +#define PINMUX_GPIO190__FUNC_ANT_SEL19 (MTK_PIN_NO(190) | 3) +#define PINMUX_GPIO190__FUNC_I2SIN4_BCK (MTK_PIN_NO(190) | 5) + +#define PINMUX_GPIO191__FUNC_GPIO191 (MTK_PIN_NO(191) | 0) +#define PINMUX_GPIO191__FUNC_MSDC0_DAT3 (MTK_PIN_NO(191) | 1) +#define PINMUX_GPIO191__FUNC_DMIC1_DAT (MTK_PIN_NO(191) | 2) +#define PINMUX_GPIO191__FUNC_ANT_SEL20 (MTK_PIN_NO(191) | 3) +#define PINMUX_GPIO191__FUNC_I2SIN4_DATA0 (MTK_PIN_NO(191) | 5) + +#define PINMUX_GPIO192__FUNC_GPIO192 (MTK_PIN_NO(192) | 0) +#define PINMUX_GPIO192__FUNC_MSDC0_DAT4 (MTK_PIN_NO(192) | 1) +#define PINMUX_GPIO192__FUNC_IDDIG (MTK_PIN_NO(192) | 2) +#define PINMUX_GPIO192__FUNC_ANT_SEL21 (MTK_PIN_NO(192) | 3) +#define PINMUX_GPIO192__FUNC_UFS_MPHY_SCL (MTK_PIN_NO(192) | 4) +#define PINMUX_GPIO192__FUNC_I2SIN4_DATA1 (MTK_PIN_NO(192) | 5) + +#define PINMUX_GPIO193__FUNC_GPIO193 (MTK_PIN_NO(193) | 0) +#define PINMUX_GPIO193__FUNC_MSDC0_DAT5 (MTK_PIN_NO(193) | 1) +#define PINMUX_GPIO193__FUNC_USB_DRVVBUS (MTK_PIN_NO(193) | 2) +#define PINMUX_GPIO193__FUNC_UFS_MPHY_SDA (MTK_PIN_NO(193) | 4) +#define PINMUX_GPIO193__FUNC_I2SIN4_DATA2 (MTK_PIN_NO(193) | 5) + +#define PINMUX_GPIO194__FUNC_GPIO194 (MTK_PIN_NO(194) | 0) +#define PINMUX_GPIO194__FUNC_MSDC0_DAT6 (MTK_PIN_NO(194) | 1) +#define PINMUX_GPIO194__FUNC_VBUSVALID (MTK_PIN_NO(194) | 2) +#define PINMUX_GPIO194__FUNC_I2SIN4_DATA3 (MTK_PIN_NO(194) | 5) + +#define PINMUX_GPIO195__FUNC_GPIO195 (MTK_PIN_NO(195) | 0) +#define PINMUX_GPIO195__FUNC_MSDC0_DAT7 (MTK_PIN_NO(195) | 1) +#define PINMUX_GPIO195__FUNC_I2SIN4_LRCK (MTK_PIN_NO(195) | 5) + +#endif /* __MT6878_PINFUNC_H */ diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi index 917fa39a74f8d7..158bd9a305d708 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi @@ -278,6 +278,10 @@ efuse: efuse@10206000 { #address-cells = <1>; #size-cells = <1>; + soc-uuid@140 { + reg = <0x140 0x8>; + }; + thermal_calibration: calib@198 { reg = <0x198 0xc>; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts b/arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts index 4f6cbb49128722..2e39e728773017 100644 --- a/arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts +++ b/arch/arm64/boot/dts/mediatek/mt7981b-openwrt-one.dts @@ -3,13 +3,163 @@ /dts-v1/; #include "mt7981b.dtsi" +#include +#include +#include "dt-bindings/pinctrl/mt65xx.h" / { compatible = "openwrt,one", "mediatek,mt7981b"; model = "OpenWrt One"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + memory@40000000 { reg = <0 0x40000000 0 0x40000000>; device_type = "memory"; }; + + pwm-leds { + compatible = "pwm-leds"; + + led-0 { + color = ; + default-brightness = <0>; + function = LED_FUNCTION_STATUS; + max-brightness = <255>; + pwms = <&pwm 0 10000>; + }; + + led-1 { + color = ; + default-brightness = <0>; + function = LED_FUNCTION_STATUS; + max-brightness = <255>; + pwms = <&pwm 1 10000>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led-0 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&pio 9 GPIO_ACTIVE_HIGH>; + }; + + led-1 { + color = ; + function = LED_FUNCTION_LAN; + gpios = <&pio 34 GPIO_ACTIVE_LOW>; + linux,default-trigger = "netdev"; + }; + + led-2 { + color = ; + function = LED_FUNCTION_LAN; + gpios = <&pio 35 GPIO_ACTIVE_LOW>; + linux,default-trigger = "netdev"; + }; + }; +}; + +&pio { + pwm_pins: pwm-pins { + mux { + function = "pwm"; + groups = "pwm0_0", "pwm1_1"; + }; + }; + + spi2_flash_pins: spi2-pins { + mux { + function = "spi"; + groups = "spi2"; + }; + + conf-pu { + bias-pull-up = ; + drive-strength = <8>; + pins = "SPI2_CS", "SPI2_WP"; + }; + + conf-pd { + bias-pull-down = ; + drive-strength = <8>; + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + }; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + status = "okay"; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_flash_pins>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x00000 0x40000>; + label = "bl2-nor"; + }; + + partition@40000 { + reg = <0x40000 0xc0000>; + label = "factory"; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + wifi_factory_calibration: eeprom@0 { + reg = <0x0 0x1000>; + }; + + wan_factory_mac: macaddr@24 { + reg = <0x24 0x6>; + compatible = "mac-base"; + #nvmem-cell-cells = <1>; + }; + }; + }; + + partition@100000 { + reg = <0x100000 0x80000>; + label = "fip-nor"; + }; + + partition@180000 { + reg = <0x180000 0xc80000>; + label = "recovery"; + }; + }; + }; +}; + +&uart0 { + status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi index 277c11247c1323..416096b80770cc 100644 --- a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi @@ -41,6 +41,18 @@ psci { method = "smc"; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 192 KiB reserved for ARM Trusted Firmware (BL31) */ + secmon_reserved: secmon@43000000 { + reg = <0 0x43000000 0 0x30000>; + no-map; + }; + }; + soc { compatible = "simple-bus"; ranges; @@ -82,7 +94,7 @@ apmixedsys: clock-controller@1001e000 { #clock-cells = <1>; }; - pwm@10048000 { + pwm: pwm@10048000 { compatible = "mediatek,mt7981-pwm"; reg = <0 0x10048000 0 0x1000>; clocks = <&infracfg CLK_INFRA_PWM_STA>, @@ -94,7 +106,7 @@ pwm@10048000 { #pwm-cells = <2>; }; - serial@11002000 { + uart0: serial@11002000 { compatible = "mediatek,mt7981-uart", "mediatek,mt6577-uart"; reg = <0 0x11002000 0 0x100>; interrupts = ; @@ -102,10 +114,12 @@ serial@11002000 { clocks = <&infracfg CLK_INFRA_UART0_SEL>, <&infracfg CLK_INFRA_UART0_CK>; clock-names = "baud", "bus"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; status = "disabled"; }; - serial@11003000 { + uart1: serial@11003000 { compatible = "mediatek,mt7981-uart", "mediatek,mt6577-uart"; reg = <0 0x11003000 0 0x100>; interrupts = ; @@ -116,7 +130,7 @@ serial@11003000 { status = "disabled"; }; - serial@11004000 { + uart2: serial@11004000 { compatible = "mediatek,mt7981-uart", "mediatek,mt6577-uart"; reg = <0 0x11004000 0 0x100>; interrupts = ; @@ -142,7 +156,7 @@ i2c@11007000 { status = "disabled"; }; - spi@11009000 { + spi2: spi@11009000 { compatible = "mediatek,mt7981-spi-ipm", "mediatek,spi-ipm"; reg = <0 0x11009000 0 0x1000>; interrupts = ; @@ -229,6 +243,13 @@ pio: pinctrl@11d00000 { gpio-controller; #gpio-cells = <2>; #interrupt-cells = <2>; + + uart0_pins: uart0-pins { + mux { + function = "uart"; + groups = "uart0"; + }; + }; }; efuse@11f20000 { @@ -237,6 +258,10 @@ efuse@11f20000 { #address-cells = <1>; #size-cells = <1>; + soc-uuid@140 { + reg = <0x140 0x10>; + }; + thermal_calibration: thermal-calib@274 { reg = <0x274 0xc>; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts index e7654dc9a1c9b4..19f538d160ab5f 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts @@ -42,7 +42,7 @@ fan: pwm-fan { compatible = "pwm-fan"; #cooling-cells = <2>; /* cooling level (0, 1, 2) - pwm inverted */ - cooling-levels = <255 96 0>; + cooling-levels = <255 40 0>; pwms = <&pwm 0 10000>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi index a8972330a7b89c..7790601586ccf4 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi @@ -450,6 +450,10 @@ efuse: efuse@11d00000 { #address-cells = <1>; #size-cells = <1>; + soc-uuid@140 { + reg = <0x140 0x8>; + }; + thermal_calibration: calib@274 { reg = <0x274 0xc>; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts index 6f0c81e3fd941e..0e41c07d3a5f45 100644 --- a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts +++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts @@ -19,4 +19,5 @@ &gmac1 { &int_2p5g_phy { pinctrl-0 = <&i2p5gbe_led0_pins>; pinctrl-names = "i2p5gbe-led"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-4e.dts b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-4e.dts new file mode 100644 index 00000000000000..c7ea6e88c4f485 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-4e.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2025 MediaTek Inc. + * Author: Frank Wunderlich + */ + +/dts-v1/; + +#include "mt7988a-bananapi-bpi-r4-pro.dtsi" + +/ { + model = "Bananapi BPI-R4"; + compatible = "bananapi,bpi-r4-pro-4e", + "bananapi,bpi-r4-pro", + "mediatek,mt7988a"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-8x.dts b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-8x.dts new file mode 100644 index 00000000000000..c9a0e69e9dd51b --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-8x.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2025 MediaTek Inc. + * Author: Frank Wunderlich + */ + +/dts-v1/; + +#include "mt7988a-bananapi-bpi-r4-pro.dtsi" + +/ { + model = "Bananapi BPI-R4"; + compatible = "bananapi,bpi-r4-pro-8x", + "bananapi,bpi-r4-pro", + "mediatek,mt7988a"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-cn15.dtso b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-cn15.dtso new file mode 100644 index 00000000000000..9750916042deb2 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-cn15.dtso @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2025 MediaTek Inc. + * Author: Frank Wunderlich + */ + +/* This enables key-b slot CN15 on pcie2(11280000 1L0) on BPI-R4-Pro */ + +/dts-v1/; +/plugin/; + +#include + +/ { + compatible = "bananapi,bpi-r4-pro", "mediatek,mt7988a"; +}; + +&{/soc/pinctrl@1001f000/pcie-2-hog} { + output-low; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-cn18.dtso b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-cn18.dtso new file mode 100644 index 00000000000000..9830fb0fd97a2f --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-cn18.dtso @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2025 MediaTek Inc. + * Author: Frank Wunderlich + */ + +/* This enables key-b slot CN18 on pcie3(11290000 1L1) on BPI-R4-Pro */ + +/dts-v1/; +/plugin/; + +#include + +/ { + compatible = "bananapi,bpi-r4-pro", "mediatek,mt7988a"; +}; + +&{/soc/pinctrl@1001f000/pcie-3-hog} { + output-low; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-emmc.dtso b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-emmc.dtso new file mode 100644 index 00000000000000..5ed2f0a6bd662a --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-emmc.dtso @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2021 MediaTek Inc. + * Author: Frank Wunderlich + */ + +/dts-v1/; +/plugin/; + +/ { + compatible = "bananapi,bpi-r4-pro", "mediatek,mt7988a"; +}; + +&{/soc/mmc@11230000} { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_emmc_51>; + pinctrl-1 = <&mmc0_pins_emmc_51>; + bus-width = <8>; + max-frequency = <200000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + hs400-ds-delay = <0x12814>; + vqmmc-supply = <®_1p8v>; + vmmc-supply = <®_3p3v>; + non-removable; + no-sd; + no-sdio; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; +}; + diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-sd.dtso b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-sd.dtso new file mode 100644 index 00000000000000..1ec1a9fbd8ba61 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro-sd.dtso @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2023 MediaTek Inc. + * Author: Frank Wunderlich + */ + +/dts-v1/; +/plugin/; + +#include + +/ { + compatible = "bananapi,bpi-r4-pro", "mediatek,mt7988a"; +}; + +&{/soc/mmc@11230000} { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_sdcard>; + pinctrl-1 = <&mmc0_pins_sdcard>; + cd-gpios = <&pio 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + max-frequency = <48000000>; + cap-sd-highspeed; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + no-mmc; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; +}; + diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro.dtsi new file mode 100644 index 00000000000000..a48132f0941143 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-pro.dtsi @@ -0,0 +1,534 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2025 MediaTek Inc. + * Author: Sam.Shih + * Author: Frank Wunderlich + */ + +/dts-v1/; + +#include "mt7988a.dtsi" +#include +#include +#include +#include + +/ { + aliases { + ethernet0 = &gmac0; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + /* PCA9548 (0-0070) provides 4 i2c channels */ + i2c3 = &imux0; + i2c4 = &imux1_sfp1; + i2c5 = &imux2_sfp2; + i2c6 = &imux3_wifi; + }; + + chosen { + stdout-path = &serial0; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + /* cooling level (0, 1, 2, 3) : (0% duty, 30% duty, 50% duty, 100% duty) */ + cooling-levels = <0 80 128 255>; + pinctrl-0 = <&pwm0_pins>; + pinctrl-names = "default"; + pwms = <&pwm 0 50000>; + #cooling-cells = <2>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-reset { + label = "reset"; + gpios = <&pio 13 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + button-wps { + label = "WPS"; + gpios = <&pio 14 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led_red: sys-led-red { + color = ; + gpios = <&pca9555 15 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led_blue: sys-led-blue { + color = ; + gpios = <&pca9555 14 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + reg_1p8v: regulator-dvdd1v8 { + compatible = "regulator-fixed"; + regulator-name = "DVDD1V8_SOC"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3v3vd { + compatible = "regulator-fixed"; + regulator-name = "3V3VD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* SFP1 cage (LAN) */ + sfp1: sfp1 { + compatible = "sff,sfp"; + i2c-bus = <&imux1_sfp1>; + los-gpios = <&pio 70 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&pio 69 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&pio 21 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; + }; + + /* SFP2 cage (WAN) */ + sfp2: sfp2 { + compatible = "sff,sfp"; + i2c-bus = <&imux2_sfp2>; + los-gpios = <&pio 2 GPIO_ACTIVE_HIGH>; + mod-def0-gpios = <&pio 1 GPIO_ACTIVE_LOW>; + tx-disable-gpios = <&pio 0 GPIO_ACTIVE_HIGH>; + maximum-power-milliwatt = <3000>; + }; +}; + +&cci { + proc-supply = <&rt5190_buck3>; +}; + +&cpu0 { + proc-supply = <&rt5190_buck3>; +}; + +&cpu1 { + proc-supply = <&rt5190_buck3>; +}; + +&cpu2 { + proc-supply = <&rt5190_buck3>; +}; + +&cpu3 { + proc-supply = <&rt5190_buck3>; +}; + +&cpu_thermal { + trips { + cpu_trip_hot: hot { + temperature = <120000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu_trip_active_high: active-high { + temperature = <115000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_trip_active_med: active-med { + temperature = <85000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_trip_active_low: active-low { + temperature = <40000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map-cpu-active-high { + /* active: set fan to cooling level 2 */ + cooling-device = <&fan 3 3>; + trip = <&cpu_trip_active_high>; + }; + + map-cpu-active-med { + /* active: set fan to cooling level 1 */ + cooling-device = <&fan 2 2>; + trip = <&cpu_trip_active_med>; + }; + + map-cpu-active-low { + /* active: set fan to cooling level 0 */ + cooling-device = <&fan 1 1>; + trip = <&cpu_trip_active_low>; + }; + }; +}; + +ð { + pinctrl-0 = <&mdio0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&fan { + pinctrl-0 = <&pwm0_pins>; + pinctrl-names = "default"; + pwms = <&pwm 0 50000>; + status = "okay"; +}; + +&gmac0 { + status = "okay"; +}; + +&gsw_phy0 { + pinctrl-0 = <&gbe0_led0_pins>; + pinctrl-names = "gbe-led"; +}; + +&gsw_phy0_led0 { + color = ; + status = "okay"; +}; + +&gsw_port0 { + label = "mgmt"; +}; + +/* R4Pro has only port 0 connected, so disable the others */ +&gsw_phy1 { + status = "disabled"; +}; + +&gsw_port1 { + status = "disabled"; +}; + +&gsw_phy2 { + status = "disabled"; +}; + +&gsw_port2 { + status = "disabled"; +}; + +&gsw_phy3 { + status = "disabled"; +}; + +&gsw_port3 { + status = "disabled"; +}; + +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; + + rt5190a_64: rt5190a@64 { + compatible = "richtek,rt5190a"; + reg = <0x64>; + vin2-supply = <&rt5190_buck1>; + vin3-supply = <&rt5190_buck1>; + vin4-supply = <&rt5190_buck1>; + + regulators { + rt5190_buck1: buck1 { + regulator-name = "rt5190a-buck1"; + regulator-min-microvolt = <5090000>; + regulator-max-microvolt = <5090000>; + regulator-allowed-modes = + ; + regulator-boot-on; + regulator-always-on; + }; + + buck2 { + regulator-name = "vcore"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + rt5190_buck3: buck3 { + regulator-name = "vproc"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4 { + regulator-name = "rt5190a-buck4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allowed-modes = + ; + regulator-boot-on; + regulator-always-on; + }; + + ldo { + regulator-name = "rt5190a-ldo"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_1_pins>; + pinctrl-names = "default"; + status = "okay"; + + pca9545: i2c-mux@70 { + compatible = "nxp,pca9545"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + imux0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + pca9555: i2c-gpio-expander@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + address-width = <8>; + pagesize = <8>; + size = <256>; + }; + }; + + imux1_sfp1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + imux2_sfp2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + imux3_wifi: i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +/* mPCIe SIM2 (11300000) */ +&pcie0 { + status = "okay"; +}; + +/* mPCIe (11310000 near leds) SIM3 */ +&pcie1 { + status = "okay"; +}; + +/* M.2 (11280000) 1L0 key-m SSD1 CN13 / key-b SIM1 CN15 */ +&pcie2 { + status = "okay"; +}; + +/* M.2 (11290000) 1L1 key-m SSD2 CN14 / key-b SIM2 CN18 */ +&pcie3 { + status = "okay"; +}; + +&pio { + gbe0_led0_pins: gbe0-led0-pins { + mux { + function = "led"; + groups = "gbe0_led0"; + }; + }; + + i2c0_pins: i2c0-g0-pins { + mux { + function = "i2c"; + groups = "i2c0_1"; + }; + }; + + i2c1_pins: i2c1-g0-pins { + mux { + function = "i2c"; + groups = "i2c1_0"; + }; + }; + + i2c2_1_pins: i2c2-g1-pins { + mux { + function = "i2c"; + groups = "i2c2_1"; + }; + }; + + mdio0_pins: mdio0-pins { + mux { + function = "eth"; + groups = "mdc_mdio0"; + }; + + conf { + pins = "SMI_0_MDC", "SMI_0_MDIO"; + drive-strength = <8>; + }; + }; + + mmc0_pins_emmc_51: mmc0-emmc-51-pins { + mux { + function = "flash"; + groups = "emmc_51"; + }; + }; + + mmc0_pins_sdcard: mmc0-sdcard-pins { + mux { + function = "flash"; + groups = "sdcard"; + }; + }; + + /* 1L0 0=key-b (CN15), 1=key-m (CN13) */ + pcie-2-hog { + gpio-hog; + gpios = <79 GPIO_ACTIVE_HIGH>; + output-high; + }; + + /* 1L1 0=key-b (CN18), 1=key-m (CN14) */ + pcie-3-hog { + gpio-hog; + gpios = <63 GPIO_ACTIVE_HIGH>; + output-high; + }; + + pwm0_pins: pwm0-pins { + mux { + groups = "pwm0"; + function = "pwm"; + }; + }; + + spi0_flash_pins: spi0-flash-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + }; +}; + +&pwm { + status = "okay"; +}; + +&serial0 { + status = "okay"; +}; + +&spi0 { + pinctrl-0 = <&spi0_flash_pins>; + pinctrl-names = "default"; + status = "okay"; + + spi_nand: nand@0 { + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <52000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; + }; +}; + +&spi_nand { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x200000>; + label = "bl2"; + }; + + partition@200000 { + compatible = "linux,ubi"; + reg = <0x200000 0xfe00000>; + label = "ubi"; + }; + }; +}; + +/* back USB */ +&ssusb0 { + /* Use U2P only instead of both U3P/U2P due to U3P serdes shared with pcie2 */ + phys = <&xphyu2port0 PHY_TYPE_USB2>; + mediatek,u3p-dis-msk = <1>; + status = "okay"; +}; + +/* front USB */ +&ssusb1 { + status = "okay"; +}; + +&switch { + dsa,member = <1 0>; + status = "okay"; +}; + +&tphy { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&xsphy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi index 366203a72d6d20..bec590d26659c0 100644 --- a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi @@ -418,7 +418,7 @@ lvts: lvts@1100a000 { nvmem-cell-names = "lvts-calib-data-1"; }; - usb@11190000 { + ssusb0: usb@11190000 { compatible = "mediatek,mt7988-xhci", "mediatek,mtk-xhci"; reg = <0 0x11190000 0 0x2e00>, <0 0x11193e00 0 0x0100>; @@ -714,6 +714,10 @@ efuse@11f50000 { #address-cells = <1>; #size-cells = <1>; + soc-uuid@140 { + reg = <0x140 0x10>; + }; + lvts_calibration: calib@918 { reg = <0x918 0x28>; }; @@ -995,6 +999,7 @@ mdio_bus: mdio-bus { int_2p5g_phy: ethernet-phy@15 { compatible = "ethernet-phy-ieee802.3-c45"; reg = <15>; + status = "disabled"; }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 960d8955d018c1..4e20a8f2eb2580 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -1445,11 +1445,11 @@ usb_host: usb@11200000 { }; }; - audiosys: audio-controller@11220000 { + audiosys: clock-controller@11220000 { compatible = "mediatek,mt8183-audiosys", "syscon"; reg = <0 0x11220000 0 0x1000>; #clock-cells = <1>; - afe: mt8183-afe-pcm { + afe: audio-controller { compatible = "mediatek,mt8183-audio"; interrupts = ; resets = <&watchdog MT8183_TOPRGU_AUDIO_SW_RST>; diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index ec452d65703149..c7adafaa83288d 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -3067,7 +3067,7 @@ jpgdec@0,0 { jpgdec@0,10000 { compatible = "mediatek,mt8195-jpgdec-hw"; - reg = <0 0 0x10000 0x10000>;/* JPGDEC_C1 */ + reg = <0 0x10000 0 0x10000>;/* JPGDEC_C1 */ iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>, <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>, <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>, diff --git a/arch/arm64/boot/dts/mediatek/mt8196-gce.h b/arch/arm64/boot/dts/mediatek/mt8196-gce.h new file mode 100644 index 00000000000000..aa909e4f4964df --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8196-gce.h @@ -0,0 +1,612 @@ +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */ +/* + * Copyright (c) 2025 MediaTek Inc. + * + */ + +#ifndef __DTS_GCE_MT8196_H +#define __DTS_GCE_MT8196_H + +/* GCE Thread Priority + * The GCE core has multiple GCE threads, each of which can independently + * execute its own sequence of instructions. + * However, the GCE threads on the same core cannot run in parallel. + * Different GCE threads can determine thread priority based on the scenario, + * thereby serving different user needs. + * + * Low priority thread is executed when no high priority thread is active. + * Same priority thread is scheduled by round robin. + */ +#define CMDQ_THR_PRIO_LOWEST 0 +#define CMDQ_THR_PRIO_1 1 +#define CMDQ_THR_PRIO_2 2 +#define CMDQ_THR_PRIO_3 3 +#define CMDQ_THR_PRIO_4 4 +#define CMDQ_THR_PRIO_5 5 +#define CMDQ_THR_PRIO_6 6 +#define CMDQ_THR_PRIO_HIGHEST 7 + +/* + * GCE0 Hardware Event IDs + * Different SoCs will have varying numbers of hardware event signals, + * which are sent from the corresponding hardware to the GCE. + * Each hardware event signal corresponds to an event ID in the GCE. + * The CMDQ driver can use the following event ID definitions to allow + * the client driver to use wait and clear APIs provided by CMDQ, enabling + * the GCE to execute operations in the instructions for that event ID. + * + * The event IDs of GCE0 are mainly used by display hardware. + */ +/* CMDQ_EVENT_DISP0_STREAM_SOF0 ~ 15: 0 ~ 15 */ +#define CMDQ_EVENT_DISP0_STREAM_SOF(n) (0 + (n)) +/* CMDQ_EVENT_DISP0_FRAME_DONE_SEL0 ~ 15: 16 ~ 31 */ +#define CMDQ_EVENT_DISP0_FRAME_DONE_SEL(n) (16 + (n)) +#define CMDQ_EVENT_DISP0_DISP_WDMA0_TARGET_LINE_END_ENG_EVENT 32 +#define CMDQ_EVENT_DISP0_DISP_WDMA0_SW_RST_DONE_ENG_EVENT 33 +#define CMDQ_EVENT_DISP0_DISP_POSTMASK1_RST_DONE_ENG_EVENT 34 +#define CMDQ_EVENT_DISP0_DISP_POSTMASK0_RST_DONE_ENG_EVENT 35 +#define CMDQ_EVENT_DISP0_DISP_MUTEX0_TIMEOUT_ENG_EVENT 36 +/* CMDQ_EVENT_DISP0_DISP_MUTEX0_REG_UPDATE_ENG_EVENT0 ~ 15: 37 ~ 52 */ +#define CMDQ_EVENT_DISP0_DISP_MUTEX0_REG_UPDATE_ENG_EVENT(n) (37 + (n)) +#define CMDQ_EVENT_DISP0_DISP_MUTEX0_GET_RELEASE_ENG_EVENT 53 +#define CMDQ_EVENT_DISP0_DISP_MDP_RDMA0_SW_RST_DONE_ENG_EVENT 54 +/* CMDQ_EVENT_DISP1_STREAM_SOF0 ~ 15: 55 ~ 70 */ +#define CMDQ_EVENT_DISP1_STREAM_SOF(n) (55 + (n)) +/* CMDQ_EVENT_DISP1_FRAME_DONE_SEL0 ~ 15: 71 ~ 86 */ +#define CMDQ_EVENT_DISP1_FRAME_DONE_SEL(n) (71 + (n)) +/* CMDQ_EVENT_DISP1_STREAM_DONE_ENG_EVENT0 ~ 15: 87 ~ 102 */ +#define CMDQ_EVENT_DISP1_STREAM_DONE_ENG_EVENT(n) (87 + (n)) +/* CMDQ_EVENT_DISP1_REG_UPDATE_DONE_ENG_EVENT0 ~ 15: 103 ~ 118 */ +#define CMDQ_EVENT_DISP1_REG_UPDATE_DONE_ENG_EVENT(n) (103 + (n)) +#define CMDQ_EVENT_DISP1_OCIP_SUBSYS_SRAM_ISOINT_ENG_EVENT 119 +#define CMDQ_EVENT_DISP1_DISP_WDMA4_TARGET_LINE_END_ENG_EVENT 120 +#define CMDQ_EVENT_DISP1_DISP_WDMA4_SW_RST_DONE_ENG_EVENT 121 +#define CMDQ_EVENT_DISP1_DISP_WDMA3_TARGET_LINE_END_ENG_EVENT 122 +#define CMDQ_EVENT_DISP1_DISP_WDMA3_SW_RST_DONE_ENG_EVENT 123 +#define CMDQ_EVENT_DISP1_DISP_WDMA2_TARGET_LINE_END_ENG_EVENT 124 +#define CMDQ_EVENT_DISP1_DISP_WDMA2_SW_RST_DONE_ENG_EVENT 125 +#define CMDQ_EVENT_DISP1_DISP_WDMA1_TARGET_LINE_END_ENG_EVENT 126 +#define CMDQ_EVENT_DISP1_DISP_WDMA1_SW_RST_DONE_ENG_EVENT 127 +#define CMDQ_EVENT_DISP1_DISP_MUTEX0_TIMEOUT_ENG_EVENT 128 +#define CMDQ_EVENT_DISP1_DISP_MUTEX0_GET_RLZ_ENG_EVENT 129 +#define CMDQ_EVENT_DISP1_DISP_MDP_RDMA1_SW_RST_DONE_ENG_EVENT 130 +#define CMDQ_EVENT_DISP1_DISP_GDMA0_SW_RST_DONE_ENG_EVENT 131 +#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_INT_TG_VSYNC_START_ENG_EVENT 132 +#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_INT_TG_VSYNC_END_ENG_EVENT 133 +#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_INT_TG_VRR_VFP_LAST_SAFE_BLANK_ENG_EVENT 134 +#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_INT_TG_VFP_START_ENG_EVENT 135 +#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_INT_TG_VFP_LAST_LINE_ENG_EVENT 136 +#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_INT_TG_VDE_END_ENG_EVENT 137 +#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_INT_TG_TRIGGER_LOOP_CLR_ENG_EVENT 138 +#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_INT_TG_TARGET_LINE1_ENG_EVENT 139 +#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_INT_TG_TARGET_LINE0_ENG_EVENT 140 +#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_EXT_TG_VSYNC_START_ENG_EVENT 141 +#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_EXT_TG_VSYNC_END_ENG_EVENT 142 +#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_EXT_TG_VDE_START_ENG_EVENT 143 +#define CMDQ_EVENT_DISP1_DISP_DVO0_DVO_EXT_TG_VDE_END_ENG_EVENT 144 +/* CMDQ_EVENT_DISP1_DISP_DSI2_ENG_EVENT0 ~ 10: 145 ~ 155 */ +#define CMDQ_EVENT_DISP1_DISP_DSI2_ENG_EVENT(n) (145 + (n)) +/* CMDQ_EVENT_DISP1_DISP_DSI1_ENG_EVENT0 ~ 21: 156 ~ 177 */ +#define CMDQ_EVENT_DISP1_DISP_DSI1_ENG_EVENT(n) (156 + (n)) +/* CMDQ_EVENT_DISP1_DISP_DSI0_ENG_EVENT0 ~ 10: 178 ~ 188 */ +#define CMDQ_EVENT_DISP1_DISP_DSI0_ENG_EVENT(n) (178 + (n)) +#define CMDQ_EVENT_DISP1_DISP_DP_INTF1_VSYNC_START_ENG_EVENT 189 +#define CMDQ_EVENT_DISP1_DISP_DP_INTF1_VSYNC_END_ENG_EVENT 190 +#define CMDQ_EVENT_DISP1_DISP_DP_INTF1_VDE_START_ENG_EVENT 191 +#define CMDQ_EVENT_DISP1_DISP_DP_INTF1_VDE_END_ENG_EVENT 192 +#define CMDQ_EVENT_DISP1_DISP_DP_INTF1_TARGET_LINE_ENG_EVENT 193 +#define CMDQ_EVENT_DISP1_DISP_DP_INTF0_VSYNC_START_ENG_EVENT 194 +#define CMDQ_EVENT_DISP1_DISP_DP_INTF0_VSYNC_END_ENG_EVENT 195 +#define CMDQ_EVENT_DISP1_DISP_DP_INTF0_VDE_START_ENG_EVENT 196 +#define CMDQ_EVENT_DISP1_DISP_DP_INTF0_VDE_END_ENG_EVENT 197 +#define CMDQ_EVENT_DISP1_DISP_DP_INTF0_TARGET_LINE_ENG_EVENT 198 +/* CMDQ_EVENT_DISP1_BUF_UNDERRUN_ENG_EVENT0 ~ 10: 199 ~ 209 */ +#define CMDQ_EVENT_DISP1_BUF_UNDERRUN_ENG_EVENT(n) (199 + (n)) +/* CMDQ_EVENT_MML0_STREAM_SOF0 ~ 15: 210 ~ 225 */ +#define CMDQ_EVENT_MML0_STREAM_SOF(n) (210 + (n)) +/* CMDQ_EVENT_MML0_FRAME_DONE_SEL0 ~ 15: 226 ~ 241 */ +#define CMDQ_EVENT_MML0_FRAME_DONE_SEL(n) (226 + (n)) +/* CMDQ_EVENT_MML0_REG_UPDATE_DONE_ENG_EVENT0 ~ 15: 242 ~ 257 */ +#define CMDQ_EVENT_MML0_REG_UPDATE_DONE_ENG_EVENT(n) (242 + (n)) +#define CMDQ_EVENT_MML0_MDP_WROT2_SW_RST_DONE_ENG_EVENT 258 +#define CMDQ_EVENT_MML0_MDP_WROT1_SW_RST_DONE_ENG_EVENT 259 +#define CMDQ_EVENT_MML0_MDP_WROT0_SW_RST_DONE_ENG_EVENT 260 +#define CMDQ_EVENT_MML0_MDP_RROT0_SW_RST_DONE_ENG_EVENT 261 +#define CMDQ_EVENT_MML0_MDP_RDMA2_SW_RST_DONE_ENG_EVENT 262 +#define CMDQ_EVENT_MML0_MDP_RDMA1_SW_RST_DONE_ENG_EVENT 263 +#define CMDQ_EVENT_MML0_MDP_RDMA0_SW_RST_DONE_ENG_EVENT 264 +#define CMDQ_EVENT_MML0_MDP_MERGE0_SW_RST_DONE_ENG_EVENT 265 +#define CMDQ_EVENT_MML0_DISP_MUTEX0_TIMEOUT_ENG_EVENT 266 +#define CMDQ_EVENT_MML0_DISP_MUTEX0_GET_RLZ_ENG_EVENT 267 +/* CMDQ_EVENT_MML1_STREAM_SOF0 ~ 15: 268 ~ 283 */ +#define CMDQ_EVENT_MML1_STREAM_SOF(n) (268 + (n)) +/* CMDQ_EVENT_MML1_FRAME_DONE_SEL0 ~ 15: 284 ~ 299 */ +#define CMDQ_EVENT_MML1_FRAME_DONE_SEL(n) (284 + (n)) +/* CMDQ_EVENT_MML1_REG_UPDATE_DONE_ENG_EVENT0 ~ 15: 300 ~ 315 */ +#define CMDQ_EVENT_MML1_REG_UPDATE_DONE_ENG_EVENT(n) (300 + (n)) +#define CMDQ_EVENT_MML1_MDP_WROT2_SW_RST_DONE_ENG_EVENT 316 +#define CMDQ_EVENT_MML1_MDP_WROT1_SW_RST_DONE_ENG_EVENT 317 +#define CMDQ_EVENT_MML1_MDP_WROT0_SW_RST_DONE_ENG_EVENT 318 +#define CMDQ_EVENT_MML1_MDP_RROT0_SW_RST_DONE_ENG_EVENT 319 +#define CMDQ_EVENT_MML1_MDP_RDMA2_SW_RST_DONE_ENG_EVENT 320 +#define CMDQ_EVENT_MML1_MDP_RDMA1_SW_RST_DONE_ENG_EVENT 321 +#define CMDQ_EVENT_MML1_MDP_RDMA0_SW_RST_DONE_ENG_EVENT 322 +#define CMDQ_EVENT_MML1_MDP_MERGE0_SW_RST_DONE_ENG_EVENT 323 +#define CMDQ_EVENT_MML1_DISP_MUTEX0_TIMEOUT_ENG_EVENT 324 +#define CMDQ_EVENT_MML1_DISP_MUTEX0_GET_RLZ_ENG_EVENT 325 +/* CMDQ_EVENT_OVL0_STREAM_SOF0 ~ 15: 326 ~ 341 */ +#define CMDQ_EVENT_OVL0_STREAM_SOF(n) (326 + (n)) +/* CMDQ_EVENT_OVL0_FRAME_DONE_SEL0 ~ 15: 342 ~ 357 */ +#define CMDQ_EVENT_OVL0_FRAME_DONE_SEL(n) (342 + (n)) +#define CMDQ_EVENT_OVL0_OVL_UFBC_WDMA0_TARGET_LINE_END_ENG_EVENT 358 +#define CMDQ_EVENT_OVL0_OVL_MUTEX0_TIMEOUT_ENG_EVENT 359 +/* CMDQ_EVENT_OVL0_OVL_MUTEX0_REG_UPDATE_DONE_ENG_EVENT0 ~ 15: 360 ~ 375 */ +#define CMDQ_EVENT_OVL0_OVL_MUTEX0_REG_UPDATE_DONE_ENG_EVENT(n) (360 + (n)) +#define CMDQ_EVENT_OVL0_OVL_MUTEX0_GET_RELEASE_ENG_EVENT 376 +#define CMDQ_EVENT_OVL0_OVL_MDP_RDMA1_SW_RST_DONE_ENG_EVENT 377 +#define CMDQ_EVENT_OVL0_OVL_MDP_RDMA0_SW_RST_DONE_ENG_EVENT 378 +#define CMDQ_EVENT_OVL0_OVL_EXDMA9_FRAME_RESET_DONE_ENG_EVENT 379 +#define CMDQ_EVENT_OVL0_OVL_EXDMA8_FRAME_RESET_DONE_ENG_EVENT 380 +#define CMDQ_EVENT_OVL0_OVL_EXDMA7_FRAME_RESET_DONE_ENG_EVENT 381 +#define CMDQ_EVENT_OVL0_OVL_EXDMA6_FRAME_RESET_DONE_ENG_EVENT 382 +#define CMDQ_EVENT_OVL0_OVL_EXDMA5_FRAME_RESET_DONE_ENG_EVENT 383 +#define CMDQ_EVENT_OVL0_OVL_EXDMA4_FRAME_RESET_DONE_ENG_EVENT 384 +#define CMDQ_EVENT_OVL0_OVL_EXDMA3_FRAME_RESET_DONE_ENG_EVENT 385 +#define CMDQ_EVENT_OVL0_OVL_EXDMA2_FRAME_RESET_DONE_ENG_EVENT 386 +#define CMDQ_EVENT_OVL0_OVL_EXDMA1_FRAME_RESET_DONE_ENG_EVENT 387 +#define CMDQ_EVENT_OVL0_OVL_EXDMA0_FRAME_RESET_DONE_ENG_EVENT 388 +#define CMDQ_EVENT_OVL0_OVL_DISP_WDMA1_TARGET_LINE_END_ENG_EVENT 389 +#define CMDQ_EVENT_OVL0_OVL_DISP_WDMA1_SW_RST_DONE_END_ENG_EVENT 390 +#define CMDQ_EVENT_OVL0_OVL_DISP_WDMA0_TARGET_LINE_END_ENG_EVENT 391 +#define CMDQ_EVENT_OVL0_OVL_DISP_WDMA0_SW_RST_DONE_END_ENG_EVENT 392 +#define CMDQ_EVENT_OVL0_OVL_BWM0_FRAME_RESET_DONE_ENG_EVENT 393 +/* CMDQ_EVENT_OVL1_STREAM_SOF0 ~ 15: 394 ~ 409 */ +#define CMDQ_EVENT_OVL1_STREAM_SOF(n) (394 + (n)) +/* CMDQ_EVENT_OVL1_FRAME_DONE_SEL0 ~ 15: 410 ~ 425 */ +#define CMDQ_EVENT_OVL1_FRAME_DONE_SEL(n) (410 + (n)) +#define CMDQ_EVENT_OVL1_OVL_UFBC_WDMA0_TARGET_LINE_END_ENG_EVENT 426 +#define CMDQ_EVENT_OVL1_OVL_MUTEX0_TIMEOUT_ENG_EVENT 427 +/* CMDQ_EVENT_OVL1_OVL_MUTEX0_REG_UPDATE_DONE_ENG_EVENT0 ~ 15: 428 ~ 443 */ +#define CMDQ_EVENT_OVL1_OVL_MUTEX0_REG_UPDATE_DONE_ENG_EVENT(n) (428 + (n)) +#define CMDQ_EVENT_OVL1_OVL_MUTEX0_GET_RELEASE_ENG_EVENT 444 +#define CMDQ_EVENT_OVL1_OVL_MDP_RDMA1_SW_RST_DONE_ENG_EVENT 445 +#define CMDQ_EVENT_OVL1_OVL_MDP_RDMA0_SW_RST_DONE_ENG_EVENT 446 +#define CMDQ_EVENT_OVL1_OVL_EXDMA9_FRAME_RESET_DONE_ENG_EVENT 447 +#define CMDQ_EVENT_OVL1_OVL_EXDMA8_FRAME_RESET_DONE_ENG_EVENT 448 +#define CMDQ_EVENT_OVL1_OVL_EXDMA7_FRAME_RESET_DONE_ENG_EVENT 449 +#define CMDQ_EVENT_OVL1_OVL_EXDMA6_FRAME_RESET_DONE_ENG_EVENT 450 +#define CMDQ_EVENT_OVL1_OVL_EXDMA5_FRAME_RESET_DONE_ENG_EVENT 451 +#define CMDQ_EVENT_OVL1_OVL_EXDMA4_FRAME_RESET_DONE_ENG_EVENT 452 +#define CMDQ_EVENT_OVL1_OVL_EXDMA3_FRAME_RESET_DONE_ENG_EVENT 453 +#define CMDQ_EVENT_OVL1_OVL_EXDMA2_FRAME_RESET_DONE_ENG_EVENT 454 +#define CMDQ_EVENT_OVL1_OVL_EXDMA1_FRAME_RESET_DONE_ENG_EVENT 455 +#define CMDQ_EVENT_OVL1_OVL_EXDMA0_FRAME_RESET_DONE_ENG_EVENT 456 +#define CMDQ_EVENT_OVL1_OVL_DISP_WDMA1_TARGET_LINE_END_ENG_EVENT 457 +#define CMDQ_EVENT_OVL1_OVL_DISP_WDMA1_SW_RST_DONE_END_ENG_EVENT 458 +#define CMDQ_EVENT_OVL1_OVL_DISP_WDMA0_TARGET_LINE_END_ENG_EVENT 459 +#define CMDQ_EVENT_OVL1_OVL_DISP_WDMA0_SW_RST_DONE_END_ENG_EVENT 460 +#define CMDQ_EVENT_OVL1_OVL_BWM0_FRAME_RESET_DONE_ENG_EVENT 461 +#define CMDQ_EVENT_DPC_DT_DONE0 462 +#define CMDQ_EVENT_DPC_DT_DONE1 463 +#define CMDQ_EVENT_DPC_DT_DONE2_0_MERGE 464 +#define CMDQ_EVENT_DPC_DT_DONE2_1_MERGE 465 +#define CMDQ_EVENT_DPC_DT_DONE2_2_MERGE 466 +#define CMDQ_EVENT_DPC_DT_DONE2_3_MERGE 467 +#define CMDQ_EVENT_DPC_DT_DONE3 468 +#define CMDQ_EVENT_DPC_DT_DONE4_MERGE 469 +#define CMDQ_EVENT_DPC_DT_DONE5 470 +#define CMDQ_EVENT_DPC_DT_DONE6_0_MERGE 471 +#define CMDQ_EVENT_DPC_DT_DONE6_1_MERGE 472 +#define CMDQ_EVENT_DPC_DT_DONE6_2_MERGE 473 +#define CMDQ_EVENT_DPC_DT_DONE6_3_MERGE 474 +#define CMDQ_EVENT_DPC_DT_DONE7 475 +#define CMDQ_EVENT_DPC_DT_DONE32_MERGE 476 +#define CMDQ_EVENT_DPC_DT_DONE33 477 +#define CMDQ_EVENT_DPC_DT_DONE34_0 478 +#define CMDQ_EVENT_DPC_DT_DONE35 479 +#define CMDQ_EVENT_DPC_DISP_SSYS_DT_ERR_ON_BEFORE_OFF 480 +#define CMDQ_EVENT_DPC_DISP_SSYS_DT_ERR_PRETE_BEFORE_ON 481 +#define CMDQ_EVENT_DPC_DISP_DVFS_DT_ERR_ON_BEFORE_OFF 482 +#define CMDQ_EVENT_DPC_DISP_DVFS_DT_ERR_PRETE_BEFORE_ON 483 +#define CMDQ_EVENT_DPC_DISP_SB_DT_ERR_ON_BEFORE_OFF 484 +#define CMDQ_EVENT_DPC_DISP_SB_DT_ERR_PRETE_BEFORE_ON 485 +#define CMDQ_EVENT_DPC_DISP_SW_CONFIG_WHEN_MTCMOS_OFF 486 +#define CMDQ_EVENT_DPC_MML_SSYS_DT_ERR_ON_BEFORE_OFF 487 +#define CMDQ_EVENT_DPC_MML_SSYS_DT_ERR_PRETE_BEFORE_ON 488 +#define CMDQ_EVENT_DPC_MML_DVFS_DT_ERR_ON_BEFORE_OFF 489 +#define CMDQ_EVENT_DPC_MML_DVFS_DT_ERR_PRETE_BEFORE_ON 490 +#define CMDQ_EVENT_DPC_MML_SB_DT_ERR_ON_BEFORE_OFF 491 +#define CMDQ_EVENT_DPC_MML_SB_DT_ERR_PRETE_BEFORE_ON 492 +#define CMDQ_EVENT_DPC_MML_SW_CONFIG_WHEN_MTCMOS_OFF 493 +/* CMDQ_EVENT_DPTX_DPTX_EVENT0 ~ 3: 494 ~ 497 */ +#define CMDQ_EVENT_DPTX_DPTX_EVENT(n) (494 + (n)) +/* CMDQ_EVENT_EDPTX_EDPTX_EVENT0 ~ 1: 498 ~ 499 */ +#define CMDQ_EVENT_EDPTX_EDPTX_EVENT(n) (498 + (n)) + +#define CMDQ_EVENT_DSI0_TE_I_DSI0_TE_I 898 +#define CMDQ_EVENT_DSI1_TE_I_DSI1_TE_I 899 +#define CMDQ_EVENT_DSI2_TE_I_DSI2_TE_I 900 +/* CMDQ_EVENT_POWEREVENT_GCE_EVENT_SUBSYS_PWR_ACK0 ~ 23: 901 ~ 924 */ +#define CMDQ_EVENT_POWEREVENT_GCE_EVENT_SUBSYS_PWR_ACK(n) (901 + (n)) +/* CMDQ_EVENT_GCE_EVENT_DPTX_GCE_EVENT_DPTX0 ~ 1: 925 ~ 926 */ +#define CMDQ_EVENT_GCE_EVENT_DPTX_GCE_EVENT_DPTX(n) (925 + (n)) +/* CMDQ_EVENT_GCE_EVENT_DPTX_P1_GCE_EVENT_DPTX_P10 ~ 1: 927 ~ 928 */ +#define CMDQ_EVENT_GCE_EVENT_DPTX_P1_GCE_EVENT_DPTX_P1(n) (927 + (n)) +/* CMDQ_EVENT_GCE_EVENT_EDPTX_GCE_EVENT_EDPTX0 ~ 1: 929 ~ 930 */ +#define CMDQ_EVENT_GCE_EVENT_EDPTX_GCE_EVENT_EDPTX(n) (929 + (n)) +#define CMDQ_EVENT_DSI3_TE_I_DSI3_TE_I 931 +#define CMDQ_EVENT_SPI0_FINISH_EVENT_DSI4_TE_I 932 +#define CMDQ_EVENT_SPI0_EVENT_EVENT_DSI5_TE_I 933 + +/* + * GCE1 Hardware Event IDs + * Different SoCs will have varying numbers of hardware event signals, + * which are sent from the corresponding hardware to the GCE. + * Each hardware event signal corresponds to an event ID in the GCE. + * The CMDQ driver can use the following event ID definitions to allow + * the client driver to use wait and clear APIs provided by CMDQ, enabling + * the GCE to execute operations in the instructions for that event ID. + * + * The event IDs of GCE1 are mainly used by non-display hardware. + */ +#define CMDQ_EVENT_VENC3_VENC_RESERVED 0 +#define CMDQ_EVENT_VENC3_VENC_FRAME_DONE 1 +#define CMDQ_EVENT_VENC3_VENC_PAUSE_DONE 2 +#define CMDQ_EVENT_VENC3_JPGENC_DONE 3 +#define CMDQ_EVENT_VENC3_VENC_MB_DONE 4 +#define CMDQ_EVENT_VENC3_VENC_128BYTE_DONE 5 +#define CMDQ_EVENT_VENC3_JPGDEC_DONE 6 +#define CMDQ_EVENT_VENC3_JPGDEC_C1_DONE 7 +#define CMDQ_EVENT_VENC3_JPGDEC_INSUFF_DONE 8 +#define CMDQ_EVENT_VENC3_JPGDEC_C1_INSUFF_DONE 9 +#define CMDQ_EVENT_VENC3_WP_2ND_STAGE_DONE 10 +#define CMDQ_EVENT_VENC3_WP_3RD_STAGE_DONE 11 +#define CMDQ_EVENT_VENC3_PPS_HEADER_DONE 12 +#define CMDQ_EVENT_VENC3_SPS_HEADER_DONE 13 +#define CMDQ_EVENT_VENC3_VPS_HEADER_DONE 14 +#define CMDQ_EVENT_VENC3_VENC_SLICE_DONE 15 +#define CMDQ_EVENT_VENC3_VENC_SOC_SLICE_DONE 16 +#define CMDQ_EVENT_VENC3_VENC_SOC_FRAME_DONE 17 + +#define CMDQ_EVENT_VENC2_VENC_FRAME_DONE 33 +#define CMDQ_EVENT_VENC2_VENC_PAUSE_DONE 34 +#define CMDQ_EVENT_VENC2_JPGENC_DONE 35 +#define CMDQ_EVENT_VENC2_VENC_MB_DONE 36 +#define CMDQ_EVENT_VENC2_VENC_128BYTE_DONE 37 +#define CMDQ_EVENT_VENC2_JPGDEC_DONE 38 +#define CMDQ_EVENT_VENC2_JPGDEC_C1_DONE 39 +#define CMDQ_EVENT_VENC2_JPGDEC_INSUFF_DONE 40 +#define CMDQ_EVENT_VENC2_JPGDEC_C1_INSUFF_DONE 41 +#define CMDQ_EVENT_VENC2_WP_2ND_STAGE_DONE 42 +#define CMDQ_EVENT_VENC2_WP_3RD_STAGE_DONE 43 +#define CMDQ_EVENT_VENC2_PPS_HEADER_DONE 44 +#define CMDQ_EVENT_VENC2_SPS_HEADER_DONE 45 +#define CMDQ_EVENT_VENC2_VPS_HEADER_DONE 46 +#define CMDQ_EVENT_VENC2_VENC_SLICE_DONE 47 +#define CMDQ_EVENT_VENC2_VENC_SOC_SLICE_DONE 48 +#define CMDQ_EVENT_VENC2_VENC_SOC_FRAME_DONE 49 + +#define CMDQ_EVENT_VENC1_VENC_FRAME_DONE 65 +#define CMDQ_EVENT_VENC1_VENC_PAUSE_DONE 66 +#define CMDQ_EVENT_VENC1_JPGENC_DONE 67 +#define CMDQ_EVENT_VENC1_VENC_MB_DONE 68 +#define CMDQ_EVENT_VENC1_VENC_128BYTE_DONE 69 +#define CMDQ_EVENT_VENC1_JPGDEC_DONE 70 +#define CMDQ_EVENT_VENC1_JPGDEC_C1_DONE 71 +#define CMDQ_EVENT_VENC1_JPGDEC_INSUFF_DONE 72 +#define CMDQ_EVENT_VENC1_JPGDEC_C1_INSUFF_DONE 73 +#define CMDQ_EVENT_VENC1_WP_2ND_STAGE_DONE 74 +#define CMDQ_EVENT_VENC1_WP_3RD_STAGE_DONE 75 +#define CMDQ_EVENT_VENC1_PPS_HEADER_DONE 76 +#define CMDQ_EVENT_VENC1_SPS_HEADER_DONE 77 +#define CMDQ_EVENT_VENC1_VPS_HEADER_DONE 78 +#define CMDQ_EVENT_VENC1_VENC_SLICE_DONE 79 +#define CMDQ_EVENT_VENC1_VENC_SOC_SLICE_DONE 80 +#define CMDQ_EVENT_VENC1_VENC_SOC_FRAME_DONE 81 + +#define CMDQ_EVENT_VDEC1_VDEC_LINE_CNT_INT 192 +#define CMDQ_EVENT_VDEC1_VDEC_INT 193 +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_2 194 +#define CMDQ_EVENT_VDEC1_VDEC_DEC_ERR 195 +#define CMDQ_EVENT_VDEC1_VDEC_BUSY_OVERFLOW 196 +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_5 197 +#define CMDQ_EVENT_VDEC1_VDEC_INI_FETCH_RDY 198 +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_7 199 +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_8 200 +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_9 201 +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_10 202 +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_11 203 + +#define CMDQ_EVENT_VDEC1_VDEC_GCE_CNT_OP_THR 207 + +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_32 224 +#define CMDQ_EVENT_VDEC1_VDEC_LAT_INT 225 +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_34 226 +#define CMDQ_EVENT_VDEC1_VDEC_LAT_DEC_ERR 227 +#define CMDQ_EVENT_VDEC1_VDEC_LAT_BUSY_OVERFLOW 228 +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_37 229 +#define CMDQ_EVENT_VDEC1_VDEC_LAT_INI_FETCH_RDY 230 +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_39 231 +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_40 232 +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_41 233 +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_42 234 +#define CMDQ_EVENT_VDEC1_VDEC1_EVENT_43 235 + +#define CMDQ_EVENT_VDEC1_VDEC_LAT_GCE_CNT_OP_THR 239 + +#define CMDQ_EVENT_IMG_IMG_EVENT_0 256 +/* CMDQ_EVENT_IMG_TRAW0_CQ_THR_DONE_TRAW0_0 ~ 5: 257 ~ 262 */ +#define CMDQ_EVENT_IMG_TRAW0_CQ_THR_DONE_TRAW0(n) (257 + (n)) +#define CMDQ_EVENT_IMG_TRAW0_DMA_ERR_EVENT 263 +#define CMDQ_EVENT_IMG_TRAW0_DUMMY_0 264 +/* CMDQ_EVENT_IMG_TRAW1_CQ_THR_DONE_TRAW0_0 ~ 5: 265 ~ 270 */ +#define CMDQ_EVENT_IMG_TRAW1_CQ_THR_DONE_TRAW0(n) (265 + (n)) +#define CMDQ_EVENT_IMG_TRAW1_DMA_ERR_EVENT 271 +#define CMDQ_EVENT_IMG_ADL_TILE_DONE_EVENT 272 +#define CMDQ_EVENT_IMG_ADLWR0_TILE_DONE_EVENT 273 +#define CMDQ_EVENT_IMG_ADLWR1_TILE_DONE_EVENT 274 +#define CMDQ_EVENT_IMG_IMGSYS_IPE_ME_DONE 275 +#define CMDQ_EVENT_IMG_IMGSYS_IPE_MMG_DONE 276 +/* CMDQ_EVENT_IMG_QOF_ACK_EVENT0 ~ 19: 277 ~ 296 */ +#define CMDQ_EVENT_IMG_QOF_ACK_EVENT(n) (277 + (n)) +/* CMDQ_EVENT_IMG_QOF_ON_EVENT0 ~ 4: 297 ~ 301 */ +#define CMDQ_EVENT_IMG_QOF_ON_EVENT(n) (297 + (n)) +/* CMDQ_EVENT_IMG_QOF_OFF_EVENT0 ~ 4: 302 ~ 306 */ +#define CMDQ_EVENT_IMG_QOF_OFF_EVENT(n) (302 + (n)) +/* CMDQ_EVENT_IMG_QOF_SAVE_EVENT0 ~ 4: 307 ~ 311 */ +#define CMDQ_EVENT_IMG_QOF_SAVE_EVENT(n) (307 + (n)) +/* CMDQ_EVENT_IMG_QOF_RESTORE_EVENT0 ~ 4: 312 ~ 316 */ +#define CMDQ_EVENT_IMG_QOF_RESTORE_EVENT(n) (312 + (n)) +/* CMDQ_EVENT_IMG_DIP_CQ_THR_DONE_P20~5: 317 ~ 322 */ +#define CMDQ_EVENT_IMG_DIP_CQ_THR_DONE_P2(n) (317 + (n)) +#define CMDQ_EVENT_IMG_DIP_DMA_ERR_EVENT 323 +#define CMDQ_EVENT_IMG_DIP_NR_DMA_ERR_EVENT 324 +#define CMDQ_EVENT_IMG_DIP_DUMMY_0 325 +#define CMDQ_EVENT_IMG_WPE_EIS_GCE_FRAME_DONE 326 +#define CMDQ_EVENT_IMG_WPE_EIS_DONE_SYNC_OUT 327 +/* CMDQ_EVENT_IMG_WPE_EIS_CQ_THR_DONE_P20 ~ 5: 328 ~ 333 */ +#define CMDQ_EVENT_IMG_WPE_EIS_CQ_THR_DONE_P2(n) (328 + (n)) +/* CMDQ_EVENT_IMG_PQDIP_A_CQ_THR_DONE_P20 ~ 5: 334 ~ 339 */ +#define CMDQ_EVENT_IMG_PQDIP_A_CQ_THR_DONE_P2(n) (334 + (n)) +#define CMDQ_EVENT_IMG_PQA_DMA_ERR_EVENT 340 +/* CMDQ_EVENT_IMG_WPE0_DUMMY0~2: 341 ~ 343 */ +#define CMDQ_EVENT_IMG_WPE0_DUMMY(n) (341 + (n)) +#define CMDQ_EVENT_IMG_OMC_TNR_GCE_FRAME_DONE 344 +#define CMDQ_EVENT_IMG_OMC_TNR_DONE_SYNC_OUT 345 +/* CMDQ_EVENT_IMG_OMC_TNR_CQ_THR_DONE_P20 ~ 5: 346 ~ 351 */ +#define CMDQ_EVENT_IMG_OMC_TNR_CQ_THR_DONE_P2(n) (346 + (n)) +/* CMDQ_EVENT_IMG_PQDIP_B_CQ_THR_DONE_P20 ~ 5: 352 ~ 357 */ +#define CMDQ_EVENT_IMG_PQDIP_B_CQ_THR_DONE_P2(n) (352 + (n)) +#define CMDQ_EVENT_IMG_PQB_DMA_ERR_EVENT 358 +/* CMDQ_EVENT_IMG_WPE1_DUMMY0 ~ 2: 359 ~ 361 */ +#define CMDQ_EVENT_IMG_WPE1_DUMMY(n) (359 + (n)) +#define CMDQ_EVENT_IMG_WPE_LITE_GCE_FRAME_DONE 362 +#define CMDQ_EVENT_IMG_WPE_LITE_DONE_SYNC_OUT 363 +/* CMDQ_EVENT_IMG_WPE_LITE_CQ_THR_DONE_P20 ~ 5: 364 ~ 369 */ +#define CMDQ_EVENT_IMG_WPE_LITE_CQ_THR_DONE_P2(n) (364 + (n)) +#define CMDQ_EVENT_IMG_OMC_LITE_GCE_FRAME_DONE 370 +#define CMDQ_EVENT_IMG_OMC_LITE_DONE_SYNC_OUT 371 +/* CMDQ_EVENT_IMG_OMC_LITE_CQ_THR_DONE_P20 ~ 5: 372 ~ 377 */ +#define CMDQ_EVENT_IMG_OMC_LITE_CQ_THR_DONE_P2(n) (372 + (n)) +/* CMDQ_EVENT_IMG_WPE2_DUMMY0 ~ 2: 378 ~ 380 */ +#define CMDQ_EVENT_IMG_WPE2_DUMMY(n) (378 + (n)) +#define CMDQ_EVENT_IMG_IMGSYS_IPE_FDVT0_DONE 381 +#define CMDQ_EVENT_IMG_IMG_EVENT_126 382 +#define CMDQ_EVENT_IMG_IMG_EVENT_127 383 +#define CMDQ_EVENT_CAM_CAM_EVENT_0 384 +#define CMDQ_EVENT_CAM_CAM_SUBA_SW_PASS1_DONE 385 +#define CMDQ_EVENT_CAM_CAM_SUBB_SW_PASS1_DONE 386 +#define CMDQ_EVENT_CAM_CAM_SUBC_SW_PASS1_DONE 387 +#define CMDQ_EVENT_CAM_CAM_SUBA_TFMR_PASS1_DONE 388 +#define CMDQ_EVENT_CAM_CAM_SUBB_TFMR_PASS1_DONE 389 +#define CMDQ_EVENT_CAM_CAM_SUBC_TFMR_PASS1_DONE 390 +/* CMDQ_EVENT_CAM_CAMSV_A_SW_PASS1_DONE0 ~ 3: 391 ~ 394 */ +#define CMDQ_EVENT_CAM_CAMSV_A_SW_PASS1_DONE(n) (391 + (n)) +/* CMDQ_EVENT_CAM_CAMSV_B_SW_PASS1_DONE0 ~ 3: 395 ~ 398 */ +#define CMDQ_EVENT_CAM_CAMSV_B_SW_PASS1_DONE(n) (395 + (n)) +/* CMDQ_EVENT_CAM_CAMSV_C_SW_PASS1_DONE0 ~ 3: 399 + 402 */ +#define CMDQ_EVENT_CAM_CAMSV_C_SW_PASS1_DONE(n) (399 + (n)) +/* CMDQ_EVENT_CAM_CAMSV_D_SW_PASS1_DONE0 ~ 3: 403 ~ 406 */ +#define CMDQ_EVENT_CAM_CAMSV_D_SW_PASS1_DONE(n) (403 + (n)) +/* CMDQ_EVENT_CAM_CAMSV_E_SW_PASS1_DONE0 ~ 3: 407 ~ 409 */ +#define CMDQ_EVENT_CAM_CAMSV_E_SW_PASS1_DONE(n) (407 + (n)) +/* CMDQ_EVENT_CAM_CAMSV_F_SW_PASS1_DONE0 ~ 3: 411 ~ 413 */ +#define CMDQ_EVENT_CAM_CAMSV_F_SW_PASS1_DONE(n) (411 + (n)) +#define CMDQ_EVENT_CAM_MRAW0_SW_PASS1_DONE 415 +#define CMDQ_EVENT_CAM_MRAW1_SW_PASS1_DONE 416 +#define CMDQ_EVENT_CAM_MRAW2_SW_PASS1_DONE 417 +#define CMDQ_EVENT_CAM_MRAW3_SW_PASS1_DONE 418 +#define CMDQ_EVENT_CAM_UISP_SW_PASS1_DONE 419 +#define CMDQ_EVENT_CAM_TG_MRAW0_OUT_SOF 420 +#define CMDQ_EVENT_CAM_TG_MRAW1_OUT_SOF 421 +#define CMDQ_EVENT_CAM_TG_MRAW2_OUT_SOF 422 +#define CMDQ_EVENT_CAM_TG_MRAW3_OUT_SOF 423 +#define CMDQ_EVENT_CAM_PDA0_IRQO_EVENT_DONE_D1 424 +#define CMDQ_EVENT_CAM_PDA1_IRQO_EVENT_DONE_D1 425 +#define CMDQ_EVENT_CAM_DPE_DVP_CMQ_EVENT 426 +#define CMDQ_EVENT_CAM_DPE_DVS_CMQ_EVENT 427 +#define CMDQ_EVENT_CAM_DPE_DVFG_CMQ_EVENT 428 +#define CMDQ_EVENT_CAM_CAM_EVENT_45 429 +#define CMDQ_EVENT_CAM_CAM_EVENT_46 430 +#define CMDQ_EVENT_CAM_CAM_EVENT_47 431 +#define CMDQ_EVENT_CAM_CAM_EVENT_48 432 +/* CMDQ_EVENT_CAM_CAM_SUBA_TG_INT1 ~ 4: 433 ~ 436 */ +#define CMDQ_EVENT_CAM_CAM_SUBA_TG_INT(n) (433 + (n) - 1) +/* CMDQ_EVENT_CAM_CAM_SUBB_TG_INT1 ~ 4: 437 ~ 440 */ +#define CMDQ_EVENT_CAM_CAM_SUBB_TG_INT(n) (437 + (n) - 1) +/* CMDQ_EVENT_CAM_CAM_SUBC_TG_INT1 ~ 4: 441 ~ 444 */ +#define CMDQ_EVENT_CAM_CAM_SUBC_TG_INT(n) (441 + (n) - 1) +#define CMDQ_EVENT_CAM_RAW_O_SOF_SUBA 445 +#define CMDQ_EVENT_CAM_RAW_O_SOF_SUBB 446 +#define CMDQ_EVENT_CAM_RAW_O_SOF_SUBC 447 +#define CMDQ_EVENT_CAM_TFMR_RAW_O_SOF_SUBA 448 +#define CMDQ_EVENT_CAM_TFMR_RAW_O_SOF_SUBB 449 +#define CMDQ_EVENT_CAM_TFMR_RAW_O_SOF_SUBC 450 +#define CMDQ_EVENT_CAM_RAW_SEL_SOF_UISP 451 +#define CMDQ_EVENT_CAM_CAM_SUBA_RING_BUFFER_OVERFLOW_INT_IN 452 +#define CMDQ_EVENT_CAM_CAM_SUBB_RING_BUFFER_OVERFLOW_INT_IN 453 +#define CMDQ_EVENT_CAM_CAM_SUBC_RING_BUFFER_OVERFLOW_INT_IN 454 +#define CMDQ_EVENT_CAM_CAM_EVENT_71 455 +#define CMDQ_EVENT_CAM_ADL_WR_FRAME_DONE 456 +#define CMDQ_EVENT_CAM_ADL_RD_FRAME_DONE 457 +#define CMDQ_EVENT_CAM_QOF_RAWA_POWER_ON_EVENT 458 +#define CMDQ_EVENT_CAM_QOF_RAWB_POWER_ON_EVENT 459 +#define CMDQ_EVENT_CAM_QOF_RAWC_POWER_ON_EVENT 460 +#define CMDQ_EVENT_CAM_QOF_RAWA_POWER_OFF_EVENT 461 +#define CMDQ_EVENT_CAM_QOF_RAWB_POWER_OFF_EVENT 462 +#define CMDQ_EVENT_CAM_QOF_RAWC_POWER_OFF_EVENT 463 +#define CMDQ_EVENT_CAM_QOF_RAWA_SAVE_EVENT 464 +#define CMDQ_EVENT_CAM_QOF_RAWB_SAVE_EVENT 465 +#define CMDQ_EVENT_CAM_QOF_RAWC_SAVE_EVENT 466 +#define CMDQ_EVENT_CAM_QOF_RAWA_RESTORE_EVENT 467 +#define CMDQ_EVENT_CAM_QOF_RAWB_RESTORE_EVENT 468 +#define CMDQ_EVENT_CAM_QOF_RAWC_RESTORE_EVENT 469 +/* CMDQ_EVENT_CAM_QOF_CAM_EVENT0 ~ 11: 470 ~ 481 */ +#define CMDQ_EVENT_CAM_QOF_CAM_EVENT(n) (470 + (n)) +/* CMDQ_EVENT_CAM_SENINF_CFG_DONE_EVENT0 ~ 11: 482 ~ 495 */ +#define CMDQ_EVENT_CAM_SENINF_CFG_DONE_EVENT(n) (482 + (n)) +#define CMDQ_EVENT_CAM_CCU0_TO_GCE_NON_SEC_IRQ 496 +#define CMDQ_EVENT_CAM_CCU0_TO_GCE_SEC_IRQ 497 +#define CMDQ_EVENT_CAM_CCU0_TO_GCE_VM_IRQ 498 +#define CMDQ_EVENT_CAM_CCU0_TO_GCE_EXCH_VM_IRQ 499 +#define CMDQ_EVENT_CAM_CCU1_TO_GCE_NON_SEC_IRQ 500 +#define CMDQ_EVENT_CAM_CCU1_TO_GCE_SEC_IRQ 501 +#define CMDQ_EVENT_CAM_CCU1_TO_GCE_VM_IRQ 502 +#define CMDQ_EVENT_CAM_CCU1_TO_GCE_EXCH_VM_IRQ 503 +/* CMDQ_EVENT_CAM_I2C_CH2_EVENT0 ~ 4: 504 ~ 509 */ +#define CMDQ_EVENT_CAM_I2C_CH2_EVENT(n) (504 + (n)) +#define CMDQ_EVENT_CAM_CAM_EVENT_125 509 +#define CMDQ_EVENT_CAM_CAM_EVENT_126 510 +#define CMDQ_EVENT_CAM_CAM_EVENT_127 511 + +#define CMDQ_EVENT_SMI_EVENT_MMINFRA_SMI_MMSRAM_COMM_SMIASSER 898 +#define CMDQ_EVENT_SMI_EVENT_MMINFRA_SMI_MDP_COMM_SMIASSER 899 +#define CMDQ_EVENT_SMI_EVENT_MMINFRA_SMI_DISP_COMM_SMIASSER 900 + +/* + * GCE Software Tokens + * Apart from the event IDs that are already bound to hardware event signals, + * the remaining event IDs can be used as software tokens. + * This allows the client driver to name and operate them independently, + * and their usage is the same as that of hardware events. + */ +/* Begin of GCE0 software token */ +/* Config thread notify trigger thread */ +#define CMDQ_SYNC_TOKEN_CONFIG_DIRTY 640 +/* Trigger thread notify config thread */ +#define CMDQ_SYNC_TOKEN_STREAM_EOF 641 +/* Block Trigger thread until the ESD check finishes */ +#define CMDQ_SYNC_TOKEN_ESD_EOF 642 +#define CMDQ_SYNC_TOKEN_STREAM_BLOCK 643 +/* Check CABC setup finish */ +#define CMDQ_SYNC_TOKEN_CABC_EOF 644 +/* VFP period token for Msync */ +#define CMDQ_SYNC_TOKEN_VFP_PERIOD 645 +/* Software sync token for dual display */ +#define CMDQ_SYNC_TOKEN_CONFIG_DIRTY_1 694 +#define CMDQ_SYNC_TOKEN_STREAM_EOF_1 695 +#define CMDQ_SYNC_TOKEN_ESD_EOF_1 696 +#define CMDQ_SYNC_TOKEN_STREAM_BLOCK_1 697 +#define CMDQ_SYNC_TOKEN_CABC_EOF_1 698 + +/* + * GPR access tokens (for HW register backup) + * There are 15 32-bit GPR, form 3 GPR as a set + * (64-bit for address, 32-bit for value) + * + * CMDQ_SYNC_TOKEN_GPR_SET0 ~ 4: 700 ~ 704 + */ +#define CMDQ_SYNC_TOKEN_GPR_SET(n) (700 + (n)) +#define CMDQ_SYNC_TOKEN_TE_0 705 +#define CMDQ_SYNC_TOKEN_PREFETCH_TE_0 706 +#define CMDQ_SYNC_TOKEN_VIDLE_POWER_ON 707 +#define CMDQ_SYNC_TOKEN_CHECK_TRIGGER_MERGE 708 + +/* Resource lock event to control resource in GCE thread */ +#define CMDQ_SYNC_RESOURCE_WROT0 710 +#define CMDQ_SYNC_RESOURCE_WROT1 711 +/* Hardware TRACE software token */ +#define CMDQ_SYNC_TOKEN_HW_TRACE_WAIT 712 +#define CMDQ_SYNC_TOKEN_HW_TRACE_LOCK 713 +/* Software sync token for dual display */ +#define CMDQ_SYNC_TOKEN_CONFIG_DIRTY_3 714 +#define CMDQ_SYNC_TOKEN_STREAM_EOF_3 715 +#define CMDQ_SYNC_TOKEN_ESD_EOF_3 716 +#define CMDQ_SYNC_TOKEN_STREAM_BLOCK_3 717 +#define CMDQ_SYNC_TOKEN_CABC_EOF_3 718 +/* End of GCE0 software token */ + +/* Begin of GCE1 software token */ +/* CMDQ_SYNC_TOKEN_IMGSYS_POOL0 ~ 300: 512 ~ 812 */ +#define CMDQ_SYNC_TOKEN_IMGSYS_POOL(n) (512 + (n)) +/* ISP software token */ +#define CMDQ_SYNC_TOKEN_IMGSYS_WPE_EIS 813 +#define CMDQ_SYNC_TOKEN_IMGSYS_OMC_TNR 814 +#define CMDQ_SYNC_TOKEN_IMGSYS_WPE_LITE 815 +#define CMDQ_SYNC_TOKEN_IMGSYS_TRAW 816 +#define CMDQ_SYNC_TOKEN_IMGSYS_LTRAW 817 +#define CMDQ_SYNC_TOKEN_IMGSYS_XTRAW 818 +#define CMDQ_SYNC_TOKEN_IMGSYS_DIP 819 +#define CMDQ_SYNC_TOKEN_IMGSYS_PQDIP_A 820 +#define CMDQ_SYNC_TOKEN_IMGSYS_PQDIP_B 821 +#define CMDQ_SYNC_TOKEN_IPESYS_ME 822 +#define CMDQ_SYNC_TOKEN_APUSYS_APU 823 +#define CMDQ_SYNC_TOKEN_IMGSYS_VSS_TRAW 824 +#define CMDQ_SYNC_TOKEN_IMGSYS_VSS_LTRAW 825 +#define CMDQ_SYNC_TOKEN_IMGSYS_VSS_XTRAW 826 +#define CMDQ_SYNC_TOKEN_IMGSYS_VSS_DIP 827 +#define CMDQ_SYNC_TOKEN_IMGSYS_OMC_LITE 828 +/* IMG software token for QoS */ +#define CMDQ_SYNC_TOKEN_IMGSYS_QOS_LOCK 829 +/* IMG software token for Qof */ +#define CMDQ_SYNC_TOKEN_DIP_POWER_CTRL 830 +#define CMDQ_SYNC_TOKEN_DIP_TRIG_PWR_ON 831 +#define CMDQ_SYNC_TOKEN_DIP_PWR_ON 832 +#define CMDQ_SYNC_TOKEN_DIP_TRIG_PWR_OFF 833 +#define CMDQ_SYNC_TOKEN_DIP_PWR_OFF 834 +#define CMDQ_SYNC_TOKEN_DIP_PWR_HAND_SHAKE 835 +#define CMDQ_SYNC_TOKEN_TRAW_POWER_CTRL 836 +#define CMDQ_SYNC_TOKEN_TRAW_TRIG_PWR_ON 837 +#define CMDQ_SYNC_TOKEN_TRAW_PWR_ON 838 +#define CMDQ_SYNC_TOKEN_TRAW_TRIG_PWR_OFF 839 +#define CMDQ_SYNC_TOKEN_TRAW_PWR_OFF 840 +#define CMDQ_SYNC_TOKEN_TRAW_PWR_HAND_SHAKE 841 +/* End of GCE1 software token */ + +/* Begin of common software token */ +/* + * Notify normal CMDQ there are some secure task done + * MUST NOT CHANGE, this token sync with secure world + */ +#define CMDQ_SYNC_SECURE_THR_EOF 940 +/* CMDQ use software token */ +#define CMDQ_SYNC_TOKEN_USER_0 941 +#define CMDQ_SYNC_TOKEN_USER_1 942 +#define CMDQ_SYNC_TOKEN_POLL_MONITOR 943 +#define CMDQ_SYNC_TOKEN_TPR_LOCK 942 +/* TZMP software token */ +#define CMDQ_SYNC_TOKEN_TZMP_DISP_WAIT 943 +#define CMDQ_SYNC_TOKEN_TZMP_DISP_SET 944 +#define CMDQ_SYNC_TOKEN_TZMP_ISP_WAIT 945 +#define CMDQ_SYNC_TOKEN_TZMP_ISP_SET 946 +#define CMDQ_SYNC_TOKEN_TZMP_AIE_WAIT 947 +#define CMDQ_SYNC_TOKEN_TZMP_AIE_SET 948 +#define CMDQ_SYNC_TOKEN_TZMP_ADL_WAIT 949 +#define CMDQ_SYNC_TOKEN_TZMP_ADL_SET 950 +/* PREBUILT software token */ +#define CMDQ_SYNC_TOKEN_PREBUILT_MDP_LOCK 951 +#define CMDQ_SYNC_TOKEN_PREBUILT_MML_LOCK 952 +#define CMDQ_SYNC_TOKEN_PREBUILT_VFMT_LOCK 953 +#define CMDQ_SYNC_TOKEN_PREBUILT_DISP_LOCK 954 +#define CMDQ_SYNC_TOKEN_DISP_VA_START 955 +#define CMDQ_SYNC_TOKEN_DISP_VA_END 956 + +/* + * Event for GPR timer, used in sleep and poll with timeout + * + * CMDQ_TOKEN_GPR_TIMER_R0~15: 994 ~ 1009 + */ +#define CMDQ_TOKEN_GPR_TIMER_R(n) (994 + (n)) +/* End of common software token */ + +#endif diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts index c8418888268d98..b5dd5ef9fa11ae 100644 --- a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts +++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts @@ -284,6 +284,11 @@ eth_phy: ethernet-phy@0 { }; }; +&gpu { + mali-supply = <&mt6357_vcore_reg>; + status = "okay"; +}; + &i2c0 { clock-frequency = <100000>; pinctrl-0 = <&i2c0_pins>; @@ -353,6 +358,10 @@ touchscreen@5d { }; }; +&mfg { + domain-supply = <&mt6357_vsram_others_reg>; +}; + &mmc0 { assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL>; assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi index e6d2b3221a3b7a..a5ca3cda6ef30d 100644 --- a/arch/arm64/boot/dts/mediatek/mt8365.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi @@ -267,6 +267,26 @@ clk26m: oscillator { clock-output-names = "clk26m"; }; + gpu_opp_table: opp-table-gpu { + compatible = "operating-points-v2"; + opp-shared; + + opp-450000000 { + opp-hz = /bits/ 64 <450000000>; + opp-microvolt = <650000>; + }; + + opp-560000000 { + opp-hz = /bits/ 64 <560000000>; + opp-microvolt = <700000>; + }; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <800000>; + }; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -292,6 +312,27 @@ gic: interrupt-controller@c000000 { interrupts = ; }; + mfgcfg: syscon@13000000 { + compatible = "mediatek,mt8365-mfgcfg", "syscon"; + reg = <0 0x13000000 0 0x1000>; + #clock-cells = <1>; + }; + + gpu: gpu@13040000 { + compatible = "mediatek,mt8365-mali", "arm,mali-bifrost"; + reg = <0 0x13040000 0 0x4000>; + + clocks = <&mfgcfg CLK_MFG_BG3D>; + interrupts = , + , + , + ; + interrupt-names = "job", "mmu", "gpu", "event"; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&spm MT8365_POWER_DOMAIN_MFG>; + status = "disabled"; + }; + topckgen: syscon@10000000 { compatible = "mediatek,mt8365-topckgen", "syscon"; reg = <0 0x10000000 0 0x1000>; @@ -398,7 +439,7 @@ power-domain@MT8365_POWER_DOMAIN_CONN { mediatek,infracfg = <&infracfg>; }; - power-domain@MT8365_POWER_DOMAIN_MFG { + mfg: power-domain@MT8365_POWER_DOMAIN_MFG { reg = ; clocks = <&topckgen CLK_TOP_MFG_SEL>; clock-names = "mfg"; diff --git a/arch/arm64/boot/dts/mediatek/mt8370-grinn-genio-510-sbc.dts b/arch/arm64/boot/dts/mediatek/mt8370-grinn-genio-510-sbc.dts new file mode 100644 index 00000000000000..92ff80e60974b2 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8370-grinn-genio-510-sbc.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2025 Grinn sp. z o.o. + * Author: Bartosz Bilas + */ +/dts-v1/; + +#include "mt8370.dtsi" +#include "mt8390-grinn-genio-som.dtsi" +#include "mt8390-grinn-genio-sbc.dtsi" + +/ { + model = "Grinn GenioSBC-510"; + compatible = "grinn,genio-510-sbc", "mediatek,mt8370", "mediatek,mt8188"; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 1 0x00000000>; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-700-sbc.dts b/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-700-sbc.dts new file mode 100644 index 00000000000000..4931d761bd1fa4 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-700-sbc.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2025 Grinn sp. z o.o. + * Author: Mateusz Koza + */ +/dts-v1/; + +#include "mt8188.dtsi" +#include "mt8390-grinn-genio-som.dtsi" +#include "mt8390-grinn-genio-sbc.dtsi" + +/ { + model = "Grinn GenioSBC-700"; + compatible = "grinn,genio-700-sbc", "mediatek,mt8390", "mediatek,mt8188"; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 1 0x00000000>; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-sbc.dtsi b/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-sbc.dtsi new file mode 100644 index 00000000000000..888248a75e933d --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-sbc.dtsi @@ -0,0 +1,538 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2025 Grinn sp. z o.o. + * Author: Mateusz Koza + */ + +#include + +/ { + chassis-type = "embedded"; + + aliases { + ethernet0 = ð + i2c0 = &i2c0; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c5 = &i2c5; + i2c6 = &i2c6; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * 12 MiB reserved for OP-TEE (BL32) + * +-----------------------+ 0x43e0_0000 + * | SHMEM 2MiB | + * +-----------------------+ 0x43c0_0000 + * | | TA_RAM 8MiB | + * + TZDRAM +--------------+ 0x4340_0000 + * | | TEE_RAM 2MiB | + * +-----------------------+ 0x4320_0000 + */ + optee_reserved: optee@43200000 { + no-map; + reg = <0 0x43200000 0 0x00c00000>; + }; + + scp_mem: memory@50000000 { + compatible = "shared-dma-pool"; + reg = <0 0x50000000 0 0x2900000>; + no-map; + }; + + /* 2 MiB reserved for ARM Trusted Firmware (BL31) */ + bl31_secmon_reserved: memory@54600000 { + no-map; + reg = <0 0x54600000 0x0 0x200000>; + }; + + apu_mem: memory@55000000 { + compatible = "shared-dma-pool"; + reg = <0 0x55000000 0 0x1400000>; /* 20 MB */ + }; + + vpu_mem: memory@57000000 { + compatible = "shared-dma-pool"; + reg = <0 0x57000000 0 0x1400000>; /* 20 MB */ + }; + + adsp_mem: memory@60000000 { + compatible = "shared-dma-pool"; + reg = <0 0x60000000 0 0xf00000>; + no-map; + }; + + afe_dma_mem: memory@60f00000 { + compatible = "shared-dma-pool"; + reg = <0 0x60f00000 0 0x100000>; + no-map; + }; + + adsp_dma_mem: memory@61000000 { + compatible = "shared-dma-pool"; + reg = <0 0x61000000 0 0x100000>; + no-map; + }; + }; + + reg_sbc_vsys: regulator-vsys { + compatible = "regulator-fixed"; + regulator-name = "vsys"; + regulator-always-on; + regulator-boot-on; + }; + + reg_fixed_5v: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + vin-supply = <®_sbc_vsys>; + }; + + reg_fixed_4v2: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-4v2"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + enable-active-high; + regulator-always-on; + vin-supply = <®_sbc_vsys>; + }; + + reg_fixed_3v3: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + regulator-always-on; + vin-supply = <®_sbc_vsys>; + }; +}; + +&pio { + gpio-line-names = + /* 0 - 4 */ "RPI_GPIO0", "RPI_GPIO1", "", "", "RPI_GPIO4", + /* 5 - 9 */ "", "RPI_GPIO6", "", "", "RPI_GPIO9", + /* 10 - 14 */ "RPI_GPIO10", "RPI_GPIO11", "", "", "", + /* 15 - 19 */ "", "", "", "", "", + /* 20 - 24 */ "", "RPI_GPIO21", "", "RPI_GPIO23", "", + /* 25 - 29 */ "", "", "", "", "", + /* 30 - 34 */ "RPI_GPIO30", "", "", "", "", + /* 35 - 39 */ "RPI_GPIO35", "RPI_GPIO36", "", "", "", + /* 40 - 44 */ "", "", "", "", "", + /* 45 - 49 */ "", "", "", "", "", + /* 50 - 54 */ "", "", "", "", "", + /* 55 - 59 */ "RPI_GPIO55", "RPI_GPIO56", "", "", "RPI_GPIO59", + /* 60 - 64 */ "RPI_GPIO60", "", "", "", "", + /* 65 - 69 */ "", "", "", "", "RPI_GPIO69", + /* 70 - 74 */ "", "", "RPI_GPIO72", "RPI_GPIO73", "RPI_GPIO74", + /* 75 - 79 */ "", "", "", "", "RPI_GPIO79", + /* 80 - 84 */ "RPI_GPIO80", "RPI_GPIO81", "RPI_GPIO82", "", "", + /* 85 - 89 */ "", "", "", "", "", + /* 90 - 94 */ "", "", "", "", "", + /* 95 - 99 */ "", "", "", "", "", + /*100 - 104 */ "", "", "", "", "", + /*105 - 109 */ "", "", "", "", "", + /*110 - 114 */ "", "", "", "", "", + /*115 - 119 */ "", "", "", "", "", + /*120 - 124 */ "", "RPI_GPIO121", "RPI_GPIO122", "RPI_GPIO123", "RPI_GPIO124"; + + i2c0_pins: i2c0-pins { + pins { + pinmux = , + ; + bias-pull-up = ; + drive-strength-microamp = <1000>; + }; + }; + + i2c2_pins: i2c2-pins { + pins { + pinmux = , + ; + bias-pull-up = ; + drive-strength-microamp = <1000>; + }; + }; + + i2c3_pins: i2c3-pins { + pins { + pinmux = , + ; + bias-pull-up = ; + drive-strength-microamp = <1000>; + }; + }; + + i2c5_pins: i2c5-pins { + pins { + pinmux = , + ; + bias-pull-up = ; + drive-strength-microamp = <1000>; + }; + }; + + i2c6_pins: i2c6-pins { + pins { + pinmux = , + ; + bias-pull-up = ; + drive-strength-microamp = <1000>; + }; + }; + + uart0_pins: uart0-pins { + pins { + pinmux = , + ; + bias-pull-up; + }; + }; + + uart1_pins: uart1-pins { + pins { + pinmux = , + ; + bias-pull-up; + }; + }; + + uart2_pins: uart2-pins { + pins { + pinmux = , + ; + bias-pull-up; + }; + }; + + pcie_pins_default: pcie-default { + mux { + pinmux = , + , + ; + bias-pull-up; + }; + }; + + eth_default_pins: eth-default-pins { + pins-cc { + pinmux = , + , + , + ; + drive-strength = <8>; + }; + + pins-mdio { + pinmux = , + ; + drive-strength = <8>; + input-enable; + }; + + pins-power { + pinmux = , + ; + output-high; + }; + + pins-rxd { + pinmux = , + , + , + ; + drive-strength = <8>; + }; + + pins-txd { + pinmux = , + , + , + ; + drive-strength = <8>; + }; + }; + + eth_sleep_pins: eth-sleep-pins { + pins-cc { + pinmux = , + , + , + ; + }; + + pins-mdio { + pinmux = , + ; + input-disable; + bias-disable; + }; + + pins-rxd { + pinmux = , + , + , + ; + }; + + pins-txd { + pinmux = , + , + , + ; + }; + }; + + spi2_pins: spi2-pins { + pins-spi { + pinmux = , + , + , + ; + bias-disable; + }; + }; + + audio_default_pins: audio-default-pins { + pins-cmd-dat { + pinmux = , + , + , + ; + }; + }; + + usb_default_pins: usb-default-pins { + pins-valid { + pinmux = ; + input-enable; + }; + }; +}; + +ð { + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <ð_default_pins>; + pinctrl-1 = <ð_sleep_pins>; + mediatek,mac-wol; + mediatek,tx-delay-ps = <30>; + snps,reset-active-low; + snps,reset-delays-us = <0 11000 200000>; + snps,reset-gpio = <&pio 147 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +ð_mdio { + ethernet_phy0: ethernet-phy@3 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <3>; + interrupts-extended = <&pio 148 IRQ_TYPE_LEVEL_LOW>; + eee-broken-1000t; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pins_default>; + status = "okay"; +}; + +&pciephy { + status = "okay"; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins>; + mediatek,pad-select = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; +}; + +&u3phy0 { + status = "okay"; +}; + +&u3phy1 { + status = "okay"; +}; + +&u3phy2 { + status = "okay"; +}; + +&xhci1 { + #address-cells = <1>; + #size-cells = <0>; + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; + + hub_2_0: hub@1 { + compatible = "usb451,8027"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + vdd-supply = <®_fixed_3v3>; + }; + + hub_3_0: hub@2 { + compatible = "usb451,8025"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + vdd-supply = <®_fixed_3v3>; + }; +}; + +&xhci2 { + #address-cells = <1>; + #size-cells = <0>; + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; + + hub@1 { + compatible = "microchip,usb2513bi"; + reg = <1>; + vdd-supply = <®_fixed_3v3>; + }; +}; + +&ssusb0 { + dr_mode = "peripheral"; + pinctrl-names = "default"; + pinctrl-0 = <&usb_default_pins>; + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&ssusb1 { + dr_mode = "host"; + maximum-speed = "super-speed"; + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&ssusb2 { + dr_mode = "host"; + maximum-speed = "high-speed"; + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&scp_cluster { + status = "okay"; +}; + +&scp_c0 { + memory-region = <&scp_mem>; + status = "okay"; +}; + +&gpu { + mali-supply = <&mt6359_vproc2_buck_reg>; + status = "okay"; +}; + +&adsp { + memory-region = <&adsp_dma_mem>, <&adsp_mem>; + status = "okay"; +}; + +&afe { + memory-region = <&afe_dma_mem>; + status = "okay"; +}; + +&sound { + compatible = "mediatek,mt8390-mt6359-evk", "mediatek,mt8188-mt6359-evb"; + model = "mt8390-evk"; + pinctrl-names = "default"; + pinctrl-0 = <&audio_default_pins>; + audio-routing = + "Headphone", "Headphone L", + "Headphone", "Headphone R", + "AP DMIC", "AUDGLB", + "AP DMIC", "MIC_BIAS_0", + "AP DMIC", "MIC_BIAS_2", + "DMIC_INPUT", "AP DMIC"; + + mediatek,adsp = <&adsp>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-som.dtsi b/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-som.dtsi new file mode 100644 index 00000000000000..8da47c9163138f --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8390-grinn-genio-som.dtsi @@ -0,0 +1,210 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2025 Grinn sp. z o.o. + * Author: Mateusz Koza + */ + +#include "mt6359.dtsi" +#include + +/ { + aliases { + i2c1 = &i2c1; + mmc0 = &mmc0; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&mfg0 { + domain-supply = <&mt6359_vproc2_buck_reg>; +}; + +&mfg1 { + domain-supply = <&mt6359_vsram_others_ldo_reg>; +}; + +&mmc0 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_default_pins>; + pinctrl-1 = <&mmc0_uhs_pins>; + bus-width = <8>; + max-frequency = <200000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + supports-cqe; + cap-mmc-hw-reset; + no-sdio; + no-sd; + hs400-ds-delay = <0x1481b>; + vmmc-supply = <&mt6359_vemc_1_ldo_reg>; + vqmmc-supply = <&mt6359_vufs_ldo_reg>; + non-removable; +}; + +&mt6359_vbbck_ldo_reg { + regulator-always-on; +}; + +&mt6359_vcn18_ldo_reg { + regulator-name = "vcn18_pmu"; + regulator-always-on; +}; + +&mt6359_vcn33_2_bt_ldo_reg { + regulator-name = "vcn33_2_pmu"; + regulator-always-on; +}; + +&mt6359_vcore_buck_reg { + regulator-name = "dvdd_proc_l"; + regulator-always-on; +}; + +&mt6359_vgpu11_buck_reg { + regulator-name = "dvdd_core"; + regulator-always-on; +}; + +&mt6359_vpa_buck_reg { + regulator-name = "vpa_pmu"; + regulator-max-microvolt = <3100000>; +}; + +&mt6359_vproc2_buck_reg { + /* The name "vgpu" is required by mtk-regulator-coupler */ + regulator-name = "vgpu"; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <800000>; + regulator-coupled-with = <&mt6359_vsram_others_ldo_reg>; + regulator-coupled-max-spread = <6250>; +}; + +&mt6359_vpu_buck_reg { + regulator-name = "dvdd_adsp"; + regulator-always-on; +}; + +&mt6359_vrf12_ldo_reg { + regulator-name = "va12_abb2_pmu"; + regulator-always-on; +}; + +&mt6359_vsim1_ldo_reg { + regulator-name = "vsim1_pmu"; + regulator-enable-ramp-delay = <480>; +}; + +&mt6359_vsram_others_ldo_reg { + /* The name "vsram_gpu" is required by mtk-regulator-coupler */ + regulator-name = "vsram_gpu"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <800000>; + regulator-coupled-with = <&mt6359_vproc2_buck_reg>; + regulator-coupled-max-spread = <6250>; +}; + +&mt6359_vufs_ldo_reg { + regulator-name = "vufs18_pmu"; + regulator-always-on; +}; + +&pio { + + i2c1_pins: i2c1-pins { + pins { + pinmux = , + ; + bias-pull-up = ; + drive-strength-microamp = <1000>; + }; + }; + + mmc0_default_pins: mmc0-default-pins { + pins-clk { + pinmux = ; + drive-strength = <6>; + bias-pull-down = ; + }; + + pins-cmd-dat { + pinmux = , + , + , + , + , + , + , + , + ; + input-enable; + drive-strength = <6>; + bias-pull-up = ; + }; + + pins-rst { + pinmux = ; + drive-strength = <6>; + bias-pull-up = ; + }; + }; + + mmc0_uhs_pins: mmc0-uhs-pins { + pins-clk { + pinmux = ; + drive-strength = <8>; + bias-pull-down = ; + }; + + pins-cmd-dat { + pinmux = , + , + , + , + , + , + , + , + ; + input-enable; + drive-strength = <8>; + bias-pull-up = ; + }; + + pins-ds { + pinmux = ; + drive-strength = <8>; + bias-pull-down = ; + }; + + pins-rst { + pinmux = ; + drive-strength = <8>; + bias-pull-up = ; + }; + }; +}; + +&pmic { + interrupt-parent = <&pio>; + interrupts = <222 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>; + + keys { + compatible = "mediatek,mt6359-keys"; + mediatek,long-press-mode = <1>; + power-off-time-sec = <0>; + + power-key { + linux,keycodes = ; + wakeup-source; + }; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk-ufs.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk-ufs.dts new file mode 100644 index 00000000000000..e09a3ecd877303 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk-ufs.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2025 MediaTek Inc. + * Author: Ramax Lo + * Macpaul Lin + */ +/dts-v1/; + +#include "mt8395-genio-common.dtsi" + +/ { + model = "MediaTek Genio 1200 EVK-P1V2-UFS"; + compatible = "mediatek,mt8395-evk-ufs", "mediatek,mt8395", + "mediatek,mt8195"; +}; + +&ufshci { + status = "okay"; + vcc-supply = <&mt6359_vemc_1_ldo_reg>; + vccq2-supply = <&mt6359_vufs_ldo_reg>; +}; + +&ufsphy { + status = "okay"; +}; + +&mmc0 { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts index cf8cd37f570845..68455f28c24674 100644 --- a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts +++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts @@ -6,1197 +6,10 @@ */ /dts-v1/; -#include "mt8195.dtsi" -#include "mt6359.dtsi" -#include -#include -#include -#include -#include -#include -#include +#include "mt8395-genio-common.dtsi" / { model = "MediaTek Genio 1200 EVK-P1V2-EMMC"; compatible = "mediatek,mt8395-evk", "mediatek,mt8395", "mediatek,mt8195"; - - aliases { - serial0 = &uart0; - ethernet0 = ð - }; - - chosen { - stdout-path = "serial0:921600n8"; - }; - - firmware { - optee { - compatible = "linaro,optee-tz"; - method = "smc"; - }; - }; - - memory@40000000 { - device_type = "memory"; - reg = <0 0x40000000 0x2 0x00000000>; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - /* - * 12 MiB reserved for OP-TEE (BL32) - * +-----------------------+ 0x43e0_0000 - * | SHMEM 2MiB | - * +-----------------------+ 0x43c0_0000 - * | | TA_RAM 8MiB | - * + TZDRAM +--------------+ 0x4340_0000 - * | | TEE_RAM 2MiB | - * +-----------------------+ 0x4320_0000 - */ - optee_reserved: optee@43200000 { - no-map; - reg = <0 0x43200000 0 0x00c00000>; - }; - - scp_mem: memory@50000000 { - compatible = "shared-dma-pool"; - reg = <0 0x50000000 0 0x2900000>; - no-map; - }; - - vpu_mem: memory@53000000 { - compatible = "shared-dma-pool"; - reg = <0 0x53000000 0 0x1400000>; /* 20 MB */ - }; - - /* 2 MiB reserved for ARM Trusted Firmware (BL31) */ - bl31_secmon_mem: memory@54600000 { - no-map; - reg = <0 0x54600000 0x0 0x200000>; - }; - - adsp_mem: memory@60000000 { - compatible = "shared-dma-pool"; - reg = <0 0x60000000 0 0xf00000>; - no-map; - }; - - afe_dma_mem: memory@60f00000 { - compatible = "shared-dma-pool"; - reg = <0 0x60f00000 0 0x100000>; - no-map; - }; - - adsp_dma_mem: memory@61000000 { - compatible = "shared-dma-pool"; - reg = <0 0x61000000 0 0x100000>; - no-map; - }; - - apu_mem: memory@62000000 { - compatible = "shared-dma-pool"; - reg = <0 0x62000000 0 0x1400000>; /* 20 MB */ - }; - }; - - backlight_lcm0: backlight-lcm0 { - compatible = "pwm-backlight"; - brightness-levels = <0 1023>; - default-brightness-level = <576>; - num-interpolated-steps = <1023>; - pwms = <&disp_pwm0 0 500000>; - }; - - backlight_lcd1: backlight-lcd1 { - compatible = "pwm-backlight"; - pwms = <&disp_pwm1 0 500000>; - enable-gpios = <&pio 46 GPIO_ACTIVE_HIGH>; - brightness-levels = <0 1023>; - num-interpolated-steps = <1023>; - default-brightness-level = <576>; - status = "disabled"; - }; - - can_clk: can-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <20000000>; - clock-output-names = "can-clk"; - }; - - edp_panel_fixed_3v3: regulator-0 { - compatible = "regulator-fixed"; - regulator-name = "edp_panel_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - gpio = <&pio 6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&edp_panel_3v3_en_pins>; - }; - - edp_panel_fixed_12v: regulator-1 { - compatible = "regulator-fixed"; - regulator-name = "edp_backlight_12v"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - enable-active-high; - gpio = <&pio 96 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&edp_panel_12v_en_pins>; - }; - - keys: gpio-keys { - compatible = "gpio-keys"; - - button-volume-up { - wakeup-source; - debounce-interval = <100>; - gpios = <&pio 106 GPIO_ACTIVE_LOW>; - label = "volume_up"; - linux,code = ; - }; - }; - - lcm0_iovcc: regulator-vio18-lcm0 { - compatible = "regulator-fixed"; - regulator-name = "vio18_lcm0"; - enable-active-high; - gpio = <&pio 47 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&dsi0_vreg_en_pins>; - vin-supply = <&mt6360_ldo2>; - }; - - lcm0_vddp: regulator-vsys-lcm0 { - compatible = "regulator-fixed"; - regulator-name = "vsys_lcm0"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&mt6360_ldo1>; - }; - - wifi_fixed_3v3: regulator-2 { - compatible = "regulator-fixed"; - regulator-name = "wifi_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&pio 135 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; -}; - -&adsp { - memory-region = <&adsp_dma_mem>, <&adsp_mem>; - status = "okay"; -}; - -&afe { - memory-region = <&afe_dma_mem>; - status = "okay"; -}; - -&disp_pwm0 { - pinctrl-names = "default"; - pinctrl-0 = <&disp_pwm0_pins>; - status = "okay"; -}; - -&dither0_in { - remote-endpoint = <&gamma0_out>; -}; - -&dither0_out { - remote-endpoint = <&dsi0_in>; -}; - -&dmic_codec { - wakeup-delay-ms = <200>; -}; - -&dsi0 { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - panel@0 { - compatible = "startek,kd070fhfid078", "himax,hx8279"; - reg = <0>; - backlight = <&backlight_lcm0>; - enable-gpios = <&pio 48 GPIO_ACTIVE_HIGH>; - reset-gpios = <&pio 108 GPIO_ACTIVE_HIGH>; - iovcc-supply = <&lcm0_iovcc>; - vdd-supply = <&lcm0_vddp>; - pinctrl-names = "default"; - pinctrl-0 = <&panel_default_pins>; - - port { - dsi_panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dsi0_in: endpoint { - remote-endpoint = <&dither0_out>; - }; - }; - - port@1 { - reg = <1>; - dsi0_out: endpoint { - remote-endpoint = <&dsi_panel_in>; - }; - }; - }; -}; - -ð { - phy-mode ="rgmii-rxid"; - phy-handle = <ð_phy0>; - snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>; - snps,reset-delays-us = <0 10000 10000>; - mediatek,tx-delay-ps = <2030>; - mediatek,mac-wol; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <ð_default_pins>; - pinctrl-1 = <ð_sleep_pins>; - status = "okay"; - - mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - eth_phy0: ethernet-phy@1 { - compatible = "ethernet-phy-id001c.c916"; - reg = <0x1>; - }; - }; -}; - -&gamma0_out { - remote-endpoint = <&dither0_in>; -}; - -&gpu { - mali-supply = <&mt6315_7_vbuck1>; - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&i2c1 { - clock-frequency = <400000>; - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - status = "okay"; - - touchscreen@5d { - compatible = "goodix,gt9271"; - reg = <0x5d>; - interrupts-extended = <&pio 132 IRQ_TYPE_EDGE_RISING>; - irq-gpios = <&pio 132 GPIO_ACTIVE_HIGH>; - reset-gpios = <&pio 133 GPIO_ACTIVE_HIGH>; - AVDD28-supply = <&mt6360_ldo1>; - pinctrl-names = "default"; - pinctrl-0 = <&touch_pins>; - }; -}; - -&i2c2 { - clock-frequency = <400000>; - pinctrl-0 = <&i2c2_pins>; - pinctrl-names = "default"; - status = "okay"; - - typec-mux@48 { - compatible = "ite,it5205"; - reg = <0x48>; - vcc-supply = <&mt6359_vibr_ldo_reg>; - mode-switch; - orientation-switch; - status = "okay"; - - port { - it5205_sbu_ep: endpoint { - remote-endpoint = <&mt6360_ssusb_sbu_ep>; - }; - }; - }; -}; - -&i2c6 { - clock-frequency = <400000>; - pinctrl-0 = <&i2c6_pins>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - mt6360: pmic@34 { - compatible = "mediatek,mt6360"; - reg = <0x34>; - interrupt-parent = <&pio>; - interrupts = <128 IRQ_TYPE_EDGE_FALLING>; - interrupt-names = "IRQB"; - interrupt-controller; - #interrupt-cells = <1>; - pinctrl-0 = <&mt6360_pins>; - - charger { - compatible = "mediatek,mt6360-chg"; - richtek,vinovp-microvolt = <14500000>; - - otg_vbus_regulator: usb-otg-vbus-regulator { - regulator-name = "usb-otg-vbus"; - regulator-min-microvolt = <4425000>; - regulator-max-microvolt = <5825000>; - }; - }; - - regulator { - compatible = "mediatek,mt6360-regulator"; - LDO_VIN3-supply = <&mt6360_buck2>; - - mt6360_buck1: buck1 { - regulator-name = "emi_vdd2"; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1300000>; - regulator-allowed-modes = ; - regulator-always-on; - }; - - mt6360_buck2: buck2 { - regulator-name = "emi_vddq"; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1300000>; - regulator-allowed-modes = ; - regulator-always-on; - }; - - mt6360_ldo1: ldo1 { - regulator-name = "tp1_p3v0"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-allowed-modes = ; - regulator-always-on; - }; - - mt6360_ldo2: ldo2 { - regulator-name = "panel1_p1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-allowed-modes = ; - }; - - mt6360_ldo3: ldo3 { - regulator-name = "vmc_pmu"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3600000>; - regulator-allowed-modes = ; - }; - - mt6360_ldo5: ldo5 { - regulator-name = "vmch_pmu"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3600000>; - regulator-allowed-modes = ; - }; - - /* This is a measure point, which name is mt6360_ldo1 on schematic */ - mt6360_ldo6: ldo6 { - regulator-name = "mt6360_ldo1"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <2100000>; - regulator-allowed-modes = ; - }; - - mt6360_ldo7: ldo7 { - regulator-name = "emi_vmddr_en"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <2100000>; - regulator-allowed-modes = ; - regulator-always-on; - }; - }; - - tcpc { - compatible = "mediatek,mt6360-tcpc"; - interrupts-extended = <&pio 17 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "PD_IRQB"; - - connector { - compatible = "usb-c-connector"; - label = "USB-C"; - data-role = "dual"; - op-sink-microwatt = <10000000>; - power-role = "dual"; - try-power-role = "sink"; - - source-pdos = ; - sink-pdos = ; - - pd-revision = /bits/ 8 <0x03 0x01 0x01 0x06>; - - altmodes { - displayport { - svid = /bits/ 16 <0xff01>; - vdo = <0x00001c46>; - }; - }; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - typec_con_hs: endpoint { - remote-endpoint = <&mtu3_hs0_role_sw>; - }; - }; - - port@1 { - reg = <1>; - typec_con_ss: endpoint { - remote-endpoint = <&mtu3_ss0_role_sw>; - }; - }; - - port@2 { - reg = <2>; - mt6360_ssusb_sbu_ep: endpoint { - remote-endpoint = <&it5205_sbu_ep>; - }; - }; - }; - }; - }; - }; -}; - -&mfg0 { - domain-supply = <&mt6315_7_vbuck1>; -}; - -&mfg1 { - domain-supply = <&mt6359_vsram_others_ldo_reg>; -}; - -&mipi_tx0 { - status = "okay"; -}; - -&mmc0 { - status = "okay"; - pinctrl-names = "default", "state_uhs"; - pinctrl-0 = <&mmc0_default_pins>; - pinctrl-1 = <&mmc0_uhs_pins>; - bus-width = <8>; - max-frequency = <200000000>; - cap-mmc-highspeed; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - cap-mmc-hw-reset; - no-sdio; - no-sd; - hs400-ds-delay = <0x14c11>; - vmmc-supply = <&mt6359_vemc_1_ldo_reg>; - vqmmc-supply = <&mt6359_vufs_ldo_reg>; - non-removable; -}; - -&mmc1 { - pinctrl-names = "default", "state_uhs"; - pinctrl-0 = <&mmc1_default_pins>; - pinctrl-1 = <&mmc1_uhs_pins>; - bus-width = <4>; - max-frequency = <200000000>; - cap-sd-highspeed; - sd-uhs-sdr50; - sd-uhs-sdr104; - no-mmc; - no-sdio; - vmmc-supply = <&mt6360_ldo5>; - vqmmc-supply = <&mt6360_ldo3>; - status = "okay"; - non-removable; -}; - -&mt6359_vaud18_ldo_reg { - regulator-always-on; -}; - -&mt6359_vbbck_ldo_reg { - regulator-always-on; -}; - -/* For USB Hub */ -&mt6359_vcamio_ldo_reg { - regulator-always-on; -}; - -&mt6359_vcn33_2_bt_ldo_reg { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; -}; - -&mt6359_vcore_buck_reg { - regulator-always-on; -}; - -&mt6359_vgpu11_buck_reg { - regulator-always-on; -}; - -&mt6359_vpu_buck_reg { - regulator-always-on; -}; - -&mt6359_vrf12_ldo_reg { - regulator-always-on; -}; - -/* for GPU SRAM */ -&mt6359_vsram_others_ldo_reg { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <750000>; -}; - -&mt6359codec { - mediatek,mic-type-0 = <1>; /* ACC */ - mediatek,mic-type-1 = <3>; /* DCC */ - mediatek,mic-type-2 = <1>; /* ACC */ -}; - -&ovl0_in { - remote-endpoint = <&vdosys0_ep_main>; -}; - -&pcie0 { - pinctrl-names = "default", "idle"; - pinctrl-0 = <&pcie0_default_pins>; - pinctrl-1 = <&pcie0_idle_pins>; - status = "okay"; -}; - -&pcie1 { - pinctrl-names = "default"; - pinctrl-0 = <&pcie1_default_pins>; - status = "disabled"; -}; - -&pciephy { - status = "okay"; -}; - -&pio { - audio_default_pins: audio-default-pins { - pins-cmd-dat { - pinmux = , - , - , - , - , - , - , - , - , - , - , - , - ; - }; - }; - - disp_pwm1_default_pins: disp-pwm1-default-pins { - pins1 { - pinmux = ; - }; - }; - - edp_panel_12v_en_pins: edp-panel-12v-en-pins { - pins1 { - pinmux = ; - output-high; - }; - }; - - edp_panel_3v3_en_pins: edp-panel-3v3-en-pins { - pins1 { - pinmux = ; - output-high; - }; - }; - - eth_default_pins: eth-default-pins { - pins-cc { - pinmux = , - , - , - ; - drive-strength = <8>; - }; - - pins-mdio { - pinmux = , - ; - input-enable; - }; - - pins-power { - pinmux = , - ; - output-high; - }; - - pins-rxd { - pinmux = , - , - , - ; - }; - - pins-txd { - pinmux = , - , - , - ; - drive-strength = <8>; - }; - }; - - eth_sleep_pins: eth-sleep-pins { - pins-cc { - pinmux = , - , - , - ; - }; - - pins-mdio { - pinmux = , - ; - input-disable; - bias-disable; - }; - - pins-rxd { - pinmux = , - , - , - ; - }; - - pins-txd { - pinmux = , - , - , - ; - }; - }; - - gpio_key_pins: gpio-keys-pins { - pins { - pinmux = ; - bias-pull-up; - input-enable; - }; - }; - - i2c0_pins: i2c0-pins { - pins { - pinmux = , - ; - bias-pull-up = ; - drive-strength-microamp = <1000>; - }; - }; - - i2c1_pins: i2c1-pins { - pins { - pinmux = , - ; - bias-pull-up = ; - drive-strength-microamp = <1000>; - }; - }; - - i2c2_pins: i2c2-pins { - pins { - pinmux = , - ; - bias-pull-up = ; - drive-strength = <6>; - }; - }; - - i2c6_pins: i2c6-pins { - pins { - pinmux = , - ; - bias-pull-up; - }; - }; - - mmc0_default_pins: mmc0-default-pins { - pins-clk { - pinmux = ; - drive-strength = <6>; - bias-pull-down = ; - }; - - pins-cmd-dat { - pinmux = , - , - , - , - , - , - , - , - ; - input-enable; - drive-strength = <6>; - bias-pull-up = ; - }; - - pins-rst { - pinmux = ; - drive-strength = <6>; - bias-pull-up = ; - }; - }; - - mmc0_uhs_pins: mmc0-uhs-pins { - pins-clk { - pinmux = ; - drive-strength = <8>; - bias-pull-down = ; - }; - - pins-cmd-dat { - pinmux = , - , - , - , - , - , - , - , - ; - input-enable; - drive-strength = <8>; - bias-pull-up = ; - }; - - pins-ds { - pinmux = ; - drive-strength = <8>; - bias-pull-down = ; - }; - - pins-rst { - pinmux = ; - drive-strength = <8>; - bias-pull-up = ; - }; - }; - - mmc1_default_pins: mmc1-default-pins { - pins-clk { - pinmux = ; - drive-strength = <8>; - bias-pull-down = ; - }; - - pins-cmd-dat { - pinmux = , - , - , - , - ; - input-enable; - drive-strength = <8>; - bias-pull-up = ; - }; - }; - - mmc1_uhs_pins: mmc1-uhs-pins { - pins-clk { - pinmux = ; - drive-strength = <8>; - bias-pull-down = ; - }; - - pins-cmd-dat { - pinmux = , - , - , - , - ; - input-enable; - drive-strength = <8>; - bias-pull-up = ; - }; - }; - - mt6360_pins: mt6360-pins { - pins { - pinmux = , - ; - input-enable; - bias-pull-up; - }; - }; - - dsi0_vreg_en_pins: dsi0-vreg-en-pins { - pins-pwr-en { - pinmux = ; - output-low; - }; - }; - - panel_default_pins: panel-default-pins { - pins-rst { - pinmux = ; - output-high; - }; - - pins-en { - pinmux = ; - output-low; - }; - }; - - pcie0_default_pins: pcie0-default-pins { - pins { - pinmux = , - , - ; - bias-pull-up; - }; - }; - - pcie0_idle_pins: pcie0-idle-pins { - pins { - pinmux = ; - bias-disable; - output-low; - }; - }; - - pcie1_default_pins: pcie1-default-pins { - pins { - pinmux = , - , - ; - bias-pull-up; - }; - }; - - disp_pwm0_pins: disp-pwm0-pins { - pins-disp-pwm { - pinmux = ; - }; - }; - - spi1_pins: spi1-pins { - pins { - pinmux = , - , - , - ; - bias-disable; - }; - }; - - spi2_pins: spi-pins { - pins { - pinmux = , - , - , - ; - bias-disable; - }; - }; - - touch_pins: touch-pins { - pins-irq { - pinmux = ; - input-enable; - bias-disable; - }; - - pins-reset { - pinmux = ; - output-high; - }; - }; - - u3_p0_vbus: u3-p0-vbus-default-pins { - pins-vbus { - pinmux = ; - input-enable; - }; - }; - - uart0_pins: uart0-pins { - pins { - pinmux = , - ; - }; - }; - - uart1_pins: uart1-pins { - pins { - pinmux = , - , - , - ; - }; - }; -}; - -&pmic { - interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>; - - mt6359keys: keys { - compatible = "mediatek,mt6359-keys"; - mediatek,long-press-mode = <1>; - power-off-time-sec = <0>; - - power-key { - linux,keycodes = ; - wakeup-source; - }; - - home { - linux,keycodes = ; - }; - }; -}; - -&scp { - memory-region = <&scp_mem>; - firmware-name = "mediatek/mt8195/scp.img"; - status = "okay"; -}; - -&sound { - compatible = "mediatek,mt8195_mt6359"; - model = "mt8395-evk"; - pinctrl-names = "default"; - pinctrl-0 = <&audio_default_pins>; - audio-routing = - "Headphone", "Headphone L", - "Headphone", "Headphone R"; - mediatek,adsp = <&adsp>; - status = "okay"; - - headphone-dai-link { - link-name = "DL_SRC_BE"; - - codec { - sound-dai = <&pmic 0>; - }; - }; -}; - -&spi1 { - pinctrl-0 = <&spi1_pins>; - pinctrl-names = "default"; - mediatek,pad-select = <0>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - cs-gpios = <&pio 64 GPIO_ACTIVE_LOW>; - - can0: can@0 { - compatible = "microchip,mcp2518fd"; - reg = <0>; - clocks = <&can_clk>; - spi-max-frequency = <20000000>; - interrupts-extended = <&pio 16 IRQ_TYPE_LEVEL_LOW>; - vdd-supply = <&mt6359_vcn33_2_bt_ldo_reg>; - xceiver-supply = <&mt6359_vcn33_2_bt_ldo_reg>; - }; -}; - -&spi2 { - pinctrl-0 = <&spi2_pins>; - pinctrl-names = "default"; - mediatek,pad-select = <0>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; -}; - -&spmi { - #address-cells = <2>; - #size-cells = <0>; - - mt6315_6: pmic@6 { - compatible = "mediatek,mt6315-regulator"; - reg = <0x6 SPMI_USID>; - - regulators { - mt6315_6_vbuck1: vbuck1 { - regulator-name = "Vbcpu"; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1193750>; - regulator-enable-ramp-delay = <256>; - regulator-allowed-modes = <0 1 2>; - regulator-always-on; - }; - }; - }; - - mt6315_7: pmic@7 { - compatible = "mediatek,mt6315-regulator"; - reg = <0x7 SPMI_USID>; - - regulators { - mt6315_7_vbuck1: vbuck1 { - regulator-name = "Vgpu"; - regulator-min-microvolt = <546000>; - regulator-max-microvolt = <787000>; - regulator-enable-ramp-delay = <256>; - regulator-allowed-modes = <0 1 2>; - }; - }; - }; -}; - -&u3phy0 { - status = "okay"; -}; - -&u3phy1 { - status = "okay"; - - u3port1: usb-phy@700 { - mediatek,force-mode; - }; -}; - -&u3phy2 { - status = "okay"; -}; - -&u3phy3 { - status = "okay"; -}; - -&uart0 { - pinctrl-0 = <&uart0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&uart1 { - pinctrl-0 = <&uart1_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&ufsphy { - status = "disabled"; -}; - -&ssusb0 { - dr_mode = "otg"; - pinctrl-names = "default"; - pinctrl-0 = <&u3_p0_vbus>; - usb-role-switch; - vusb33-supply = <&mt6359_vusb_ldo_reg>; - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mtu3_hs0_role_sw: endpoint { - remote-endpoint = <&typec_con_hs>; - }; - }; - - port@1 { - reg = <1>; - mtu3_ss0_role_sw: endpoint { - remote-endpoint = <&typec_con_ss>; - }; - }; - }; -}; - -&ssusb2 { - vusb33-supply = <&mt6359_vusb_ldo_reg>; - status = "okay"; -}; - -&ssusb3 { - vusb33-supply = <&mt6359_vusb_ldo_reg>; - status = "okay"; -}; - -&vdosys0 { - port { - #address-cells = <1>; - #size-cells = <0>; - - vdosys0_ep_main: endpoint@0 { - reg = <0>; - remote-endpoint = <&ovl0_in>; - }; - }; -}; - -&xhci0 { - status = "okay"; -}; - -&xhci1 { - vusb33-supply = <&mt6359_vusb_ldo_reg>; - status = "okay"; -}; - -&xhci2 { - status = "okay"; -}; - -&xhci3 { - status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-common.dtsi b/arch/arm64/boot/dts/mediatek/mt8395-genio-common.dtsi new file mode 100644 index 00000000000000..2b7167804e71d0 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-common.dtsi @@ -0,0 +1,1230 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2023 MediaTek Inc. + * Author: Ben Lok + * Macpaul Lin + */ +/dts-v1/; + +#include "mt8195.dtsi" +#include "mt6359.dtsi" +#include +#include +#include +#include +#include +#include +#include + +/ { + aliases { + serial0 = &uart0; + ethernet0 = ð + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0x2 0x00000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * 12 MiB reserved for OP-TEE (BL32) + * +-----------------------+ 0x43e0_0000 + * | SHMEM 2MiB | + * +-----------------------+ 0x43c0_0000 + * | | TA_RAM 8MiB | + * + TZDRAM +--------------+ 0x4340_0000 + * | | TEE_RAM 2MiB | + * +-----------------------+ 0x4320_0000 + */ + optee_reserved: optee@43200000 { + no-map; + reg = <0 0x43200000 0 0x00c00000>; + }; + + scp_mem: memory@50000000 { + compatible = "shared-dma-pool"; + reg = <0 0x50000000 0 0x2900000>; + no-map; + }; + + vpu_mem: memory@53000000 { + compatible = "shared-dma-pool"; + reg = <0 0x53000000 0 0x1400000>; /* 20 MB */ + }; + + /* 2 MiB reserved for ARM Trusted Firmware (BL31) */ + bl31_secmon_mem: memory@54600000 { + no-map; + reg = <0 0x54600000 0x0 0x200000>; + }; + + adsp_mem: memory@60000000 { + compatible = "shared-dma-pool"; + reg = <0 0x60000000 0 0xf00000>; + no-map; + }; + + afe_dma_mem: memory@60f00000 { + compatible = "shared-dma-pool"; + reg = <0 0x60f00000 0 0x100000>; + no-map; + }; + + adsp_dma_mem: memory@61000000 { + compatible = "shared-dma-pool"; + reg = <0 0x61000000 0 0x100000>; + no-map; + }; + + apu_mem: memory@62000000 { + compatible = "shared-dma-pool"; + reg = <0 0x62000000 0 0x1400000>; /* 20 MB */ + }; + }; + + backlight_lcm0: backlight-lcm0 { + compatible = "pwm-backlight"; + brightness-levels = <0 1023>; + default-brightness-level = <576>; + num-interpolated-steps = <1023>; + pwms = <&disp_pwm0 0 500000>; + }; + + backlight_lcd1: backlight-lcd1 { + compatible = "pwm-backlight"; + pwms = <&disp_pwm1 0 500000>; + enable-gpios = <&pio 46 GPIO_ACTIVE_HIGH>; + brightness-levels = <0 1023>; + num-interpolated-steps = <1023>; + default-brightness-level = <576>; + status = "disabled"; + }; + + can_clk: can-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <20000000>; + clock-output-names = "can-clk"; + }; + + edp_panel_fixed_3v3: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "edp_panel_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&edp_panel_3v3_en_pins>; + }; + + edp_panel_fixed_12v: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "edp_backlight_12v"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + enable-active-high; + gpio = <&pio 96 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&edp_panel_12v_en_pins>; + }; + + keys: gpio-keys { + compatible = "gpio-keys"; + + button-volume-up { + wakeup-source; + debounce-interval = <100>; + gpios = <&pio 106 GPIO_ACTIVE_LOW>; + label = "volume_up"; + linux,code = ; + }; + }; + + lcm0_iovcc: regulator-vio18-lcm0 { + compatible = "regulator-fixed"; + regulator-name = "vio18_lcm0"; + enable-active-high; + gpio = <&pio 47 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&dsi0_vreg_en_pins>; + vin-supply = <&mt6360_ldo2>; + }; + + lcm0_vddp: regulator-vsys-lcm0 { + compatible = "regulator-fixed"; + regulator-name = "vsys_lcm0"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&mt6360_ldo1>; + }; + + wifi_fixed_3v3: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "wifi_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 135 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; +}; + +&adsp { + memory-region = <&adsp_dma_mem>, <&adsp_mem>; + status = "okay"; +}; + +&afe { + memory-region = <&afe_dma_mem>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu1 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu2 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu3 { + cpu-supply = <&mt6359_vcore_buck_reg>; +}; + +&cpu4 { + cpu-supply = <&mt6315_6_vbuck1>; +}; + +&cpu5 { + cpu-supply = <&mt6315_6_vbuck1>; +}; + +&cpu6 { + cpu-supply = <&mt6315_6_vbuck1>; +}; + +&cpu7 { + cpu-supply = <&mt6315_6_vbuck1>; +}; + +&disp_pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&disp_pwm0_pins>; + status = "okay"; +}; + +&dither0_in { + remote-endpoint = <&gamma0_out>; +}; + +&dither0_out { + remote-endpoint = <&dsi0_in>; +}; + +&dmic_codec { + wakeup-delay-ms = <200>; +}; + +&dsi0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + panel@0 { + compatible = "startek,kd070fhfid078", "himax,hx8279"; + reg = <0>; + backlight = <&backlight_lcm0>; + enable-gpios = <&pio 48 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 108 GPIO_ACTIVE_HIGH>; + iovcc-supply = <&lcm0_iovcc>; + vdd-supply = <&lcm0_vddp>; + pinctrl-names = "default"; + pinctrl-0 = <&panel_default_pins>; + + port { + dsi_panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dither0_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + remote-endpoint = <&dsi_panel_in>; + }; + }; + }; +}; + +ð { + phy-mode ="rgmii-rxid"; + phy-handle = <ð_phy0>; + snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>; + snps,reset-delays-us = <0 10000 10000>; + mediatek,tx-delay-ps = <2030>; + mediatek,mac-wol; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <ð_default_pins>; + pinctrl-1 = <ð_sleep_pins>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + eth_phy0: ethernet-phy@1 { + compatible = "ethernet-phy-id001c.c916"; + reg = <0x1>; + }; + }; +}; + +&gamma0_out { + remote-endpoint = <&dither0_in>; +}; + +&gpu { + mali-supply = <&mt6315_7_vbuck1>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; + + touchscreen@5d { + compatible = "goodix,gt9271"; + reg = <0x5d>; + interrupts-extended = <&pio 132 IRQ_TYPE_EDGE_RISING>; + irq-gpios = <&pio 132 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 133 GPIO_ACTIVE_HIGH>; + AVDD28-supply = <&mt6360_ldo1>; + pinctrl-names = "default"; + pinctrl-0 = <&touch_pins>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + status = "okay"; + + typec-mux@48 { + compatible = "ite,it5205"; + reg = <0x48>; + vcc-supply = <&mt6359_vibr_ldo_reg>; + mode-switch; + orientation-switch; + status = "okay"; + + port { + it5205_sbu_ep: endpoint { + remote-endpoint = <&mt6360_ssusb_sbu_ep>; + }; + }; + }; +}; + +&i2c6 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c6_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + mt6360: pmic@34 { + compatible = "mediatek,mt6360"; + reg = <0x34>; + interrupt-parent = <&pio>; + interrupts = <128 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "IRQB"; + interrupt-controller; + #interrupt-cells = <1>; + pinctrl-0 = <&mt6360_pins>; + + charger { + compatible = "mediatek,mt6360-chg"; + richtek,vinovp-microvolt = <14500000>; + + otg_vbus_regulator: usb-otg-vbus-regulator { + regulator-name = "usb-otg-vbus"; + regulator-min-microvolt = <4425000>; + regulator-max-microvolt = <5825000>; + }; + }; + + regulator { + compatible = "mediatek,mt6360-regulator"; + LDO_VIN3-supply = <&mt6360_buck2>; + + mt6360_buck1: buck1 { + regulator-name = "emi_vdd2"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = ; + regulator-always-on; + }; + + mt6360_buck2: buck2 { + regulator-name = "emi_vddq"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = ; + regulator-always-on; + }; + + mt6360_ldo1: ldo1 { + regulator-name = "tp1_p3v0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-allowed-modes = ; + regulator-always-on; + }; + + mt6360_ldo2: ldo2 { + regulator-name = "panel1_p1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allowed-modes = ; + }; + + mt6360_ldo3: ldo3 { + regulator-name = "vmc_pmu"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = ; + }; + + mt6360_ldo5: ldo5 { + regulator-name = "vmch_pmu"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = ; + }; + + /* This is a measure point, which name is mt6360_ldo1 on schematic */ + mt6360_ldo6: ldo6 { + regulator-name = "mt6360_ldo1"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = ; + }; + + mt6360_ldo7: ldo7 { + regulator-name = "emi_vmddr_en"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = ; + regulator-always-on; + }; + }; + + tcpc { + compatible = "mediatek,mt6360-tcpc"; + interrupts-extended = <&pio 17 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "PD_IRQB"; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + op-sink-microwatt = <10000000>; + power-role = "dual"; + try-power-role = "sink"; + + source-pdos = ; + sink-pdos = ; + + pd-revision = /bits/ 8 <0x03 0x01 0x01 0x06>; + + altmodes { + displayport { + svid = /bits/ 16 <0xff01>; + vdo = <0x00001c46>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + typec_con_hs: endpoint { + remote-endpoint = <&mtu3_hs0_role_sw>; + }; + }; + + port@1 { + reg = <1>; + typec_con_ss: endpoint { + remote-endpoint = <&mtu3_ss0_role_sw>; + }; + }; + + port@2 { + reg = <2>; + mt6360_ssusb_sbu_ep: endpoint { + remote-endpoint = <&it5205_sbu_ep>; + }; + }; + }; + }; + }; + }; +}; + +&mfg0 { + domain-supply = <&mt6315_7_vbuck1>; +}; + +&mfg1 { + domain-supply = <&mt6359_vsram_others_ldo_reg>; +}; + +&mipi_tx0 { + status = "okay"; +}; + +&mmc0 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_default_pins>; + pinctrl-1 = <&mmc0_uhs_pins>; + bus-width = <8>; + max-frequency = <200000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + cap-mmc-hw-reset; + no-sdio; + no-sd; + hs400-ds-delay = <0x14c11>; + vmmc-supply = <&mt6359_vemc_1_ldo_reg>; + vqmmc-supply = <&mt6359_vufs_ldo_reg>; + non-removable; +}; + +&mmc1 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc1_default_pins>; + pinctrl-1 = <&mmc1_uhs_pins>; + bus-width = <4>; + max-frequency = <200000000>; + cap-sd-highspeed; + sd-uhs-sdr50; + sd-uhs-sdr104; + no-mmc; + no-sdio; + vmmc-supply = <&mt6360_ldo5>; + vqmmc-supply = <&mt6360_ldo3>; + status = "okay"; + non-removable; +}; + +&mt6359_vaud18_ldo_reg { + regulator-always-on; +}; + +&mt6359_vbbck_ldo_reg { + regulator-always-on; +}; + +/* For USB Hub */ +&mt6359_vcamio_ldo_reg { + regulator-always-on; +}; + +&mt6359_vcn33_2_bt_ldo_reg { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; +}; + +&mt6359_vcore_buck_reg { + regulator-always-on; +}; + +&mt6359_vgpu11_buck_reg { + regulator-always-on; +}; + +&mt6359_vpu_buck_reg { + regulator-always-on; +}; + +&mt6359_vrf12_ldo_reg { + regulator-always-on; +}; + +/* for GPU SRAM */ +&mt6359_vsram_others_ldo_reg { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; +}; + +&mt6359codec { + mediatek,mic-type-0 = <1>; /* ACC */ + mediatek,mic-type-1 = <3>; /* DCC */ + mediatek,mic-type-2 = <1>; /* ACC */ +}; + +&ovl0_in { + remote-endpoint = <&vdosys0_ep_main>; +}; + +&pcie0 { + pinctrl-names = "default", "idle"; + pinctrl-0 = <&pcie0_default_pins>; + pinctrl-1 = <&pcie0_idle_pins>; + status = "okay"; +}; + +&pcie1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_pins>; + status = "disabled"; +}; + +&pciephy { + status = "okay"; +}; + +&pio { + audio_default_pins: audio-default-pins { + pins-cmd-dat { + pinmux = , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + }; + + disp_pwm1_default_pins: disp-pwm1-default-pins { + pins1 { + pinmux = ; + }; + }; + + edp_panel_12v_en_pins: edp-panel-12v-en-pins { + pins1 { + pinmux = ; + output-high; + }; + }; + + edp_panel_3v3_en_pins: edp-panel-3v3-en-pins { + pins1 { + pinmux = ; + output-high; + }; + }; + + eth_default_pins: eth-default-pins { + pins-cc { + pinmux = , + , + , + ; + drive-strength = <8>; + }; + + pins-mdio { + pinmux = , + ; + input-enable; + }; + + pins-power { + pinmux = , + ; + output-high; + }; + + pins-rxd { + pinmux = , + , + , + ; + }; + + pins-txd { + pinmux = , + , + , + ; + drive-strength = <8>; + }; + }; + + eth_sleep_pins: eth-sleep-pins { + pins-cc { + pinmux = , + , + , + ; + }; + + pins-mdio { + pinmux = , + ; + input-disable; + bias-disable; + }; + + pins-rxd { + pinmux = , + , + , + ; + }; + + pins-txd { + pinmux = , + , + , + ; + }; + }; + + gpio_key_pins: gpio-keys-pins { + pins { + pinmux = ; + bias-pull-up; + input-enable; + }; + }; + + i2c0_pins: i2c0-pins { + pins { + pinmux = , + ; + bias-pull-up = ; + drive-strength-microamp = <1000>; + }; + }; + + i2c1_pins: i2c1-pins { + pins { + pinmux = , + ; + bias-pull-up = ; + drive-strength-microamp = <1000>; + }; + }; + + i2c2_pins: i2c2-pins { + pins { + pinmux = , + ; + bias-pull-up = ; + drive-strength = <6>; + }; + }; + + i2c6_pins: i2c6-pins { + pins { + pinmux = , + ; + bias-pull-up; + }; + }; + + mmc0_default_pins: mmc0-default-pins { + pins-clk { + pinmux = ; + drive-strength = <6>; + bias-pull-down = ; + }; + + pins-cmd-dat { + pinmux = , + , + , + , + , + , + , + , + ; + input-enable; + drive-strength = <6>; + bias-pull-up = ; + }; + + pins-rst { + pinmux = ; + drive-strength = <6>; + bias-pull-up = ; + }; + }; + + mmc0_uhs_pins: mmc0-uhs-pins { + pins-clk { + pinmux = ; + drive-strength = <8>; + bias-pull-down = ; + }; + + pins-cmd-dat { + pinmux = , + , + , + , + , + , + , + , + ; + input-enable; + drive-strength = <8>; + bias-pull-up = ; + }; + + pins-ds { + pinmux = ; + drive-strength = <8>; + bias-pull-down = ; + }; + + pins-rst { + pinmux = ; + drive-strength = <8>; + bias-pull-up = ; + }; + }; + + mmc1_default_pins: mmc1-default-pins { + pins-clk { + pinmux = ; + drive-strength = <8>; + bias-pull-down = ; + }; + + pins-cmd-dat { + pinmux = , + , + , + , + ; + input-enable; + drive-strength = <8>; + bias-pull-up = ; + }; + }; + + mmc1_uhs_pins: mmc1-uhs-pins { + pins-clk { + pinmux = ; + drive-strength = <8>; + bias-pull-down = ; + }; + + pins-cmd-dat { + pinmux = , + , + , + , + ; + input-enable; + drive-strength = <8>; + bias-pull-up = ; + }; + }; + + mt6360_pins: mt6360-pins { + pins { + pinmux = , + ; + input-enable; + bias-pull-up; + }; + }; + + dsi0_vreg_en_pins: dsi0-vreg-en-pins { + pins-pwr-en { + pinmux = ; + output-low; + }; + }; + + panel_default_pins: panel-default-pins { + pins-rst { + pinmux = ; + output-high; + }; + + pins-en { + pinmux = ; + output-low; + }; + }; + + pcie0_default_pins: pcie0-default-pins { + pins { + pinmux = , + , + ; + bias-pull-up; + }; + }; + + pcie0_idle_pins: pcie0-idle-pins { + pins { + pinmux = ; + bias-disable; + output-low; + }; + }; + + pcie1_default_pins: pcie1-default-pins { + pins { + pinmux = , + , + ; + bias-pull-up; + }; + }; + + disp_pwm0_pins: disp-pwm0-pins { + pins-disp-pwm { + pinmux = ; + }; + }; + + spi1_pins: spi1-pins { + pins { + pinmux = , + , + , + ; + bias-disable; + }; + }; + + spi2_pins: spi-pins { + pins { + pinmux = , + , + , + ; + bias-disable; + }; + }; + + touch_pins: touch-pins { + pins-irq { + pinmux = ; + input-enable; + bias-disable; + }; + + pins-reset { + pinmux = ; + output-high; + }; + }; + + u3_p0_vbus: u3-p0-vbus-default-pins { + pins-vbus { + pinmux = ; + input-enable; + }; + }; + + uart0_pins: uart0-pins { + pins { + pinmux = , + ; + }; + }; + + uart1_pins: uart1-pins { + pins { + pinmux = , + , + , + ; + }; + }; +}; + +&pmic { + interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>; + + mt6359keys: keys { + compatible = "mediatek,mt6359-keys"; + mediatek,long-press-mode = <1>; + power-off-time-sec = <0>; + + power-key { + linux,keycodes = ; + wakeup-source; + }; + + home { + linux,keycodes = ; + }; + }; +}; + +&scp { + memory-region = <&scp_mem>; + firmware-name = "mediatek/mt8195/scp.img"; + status = "okay"; +}; + +&sound { + compatible = "mediatek,mt8195_mt6359"; + model = "mt8395-evk"; + pinctrl-names = "default"; + pinctrl-0 = <&audio_default_pins>; + audio-routing = + "Headphone", "Headphone L", + "Headphone", "Headphone R"; + mediatek,adsp = <&adsp>; + status = "okay"; + + headphone-dai-link { + link-name = "DL_SRC_BE"; + + codec { + sound-dai = <&pmic 0>; + }; + }; +}; + +&spi1 { + pinctrl-0 = <&spi1_pins>; + pinctrl-names = "default"; + mediatek,pad-select = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + cs-gpios = <&pio 64 GPIO_ACTIVE_LOW>; + + can0: can@0 { + compatible = "microchip,mcp2518fd"; + reg = <0>; + clocks = <&can_clk>; + spi-max-frequency = <20000000>; + interrupts-extended = <&pio 16 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&mt6359_vcn33_2_bt_ldo_reg>; + xceiver-supply = <&mt6359_vcn33_2_bt_ldo_reg>; + }; +}; + +&spi2 { + pinctrl-0 = <&spi2_pins>; + pinctrl-names = "default"; + mediatek,pad-select = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; +}; + +&spmi { + #address-cells = <2>; + #size-cells = <0>; + + mt6315_6: pmic@6 { + compatible = "mediatek,mt6315-regulator"; + reg = <0x6 SPMI_USID>; + + regulators { + mt6315_6_vbuck1: vbuck1 { + regulator-name = "Vbcpu"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1193750>; + regulator-enable-ramp-delay = <256>; + regulator-allowed-modes = <0 1 2>; + regulator-always-on; + }; + }; + }; + + mt6315_7: pmic@7 { + compatible = "mediatek,mt6315-regulator"; + reg = <0x7 SPMI_USID>; + + regulators { + mt6315_7_vbuck1: vbuck1 { + regulator-name = "Vgpu"; + regulator-min-microvolt = <546000>; + regulator-max-microvolt = <787000>; + regulator-enable-ramp-delay = <256>; + regulator-allowed-modes = <0 1 2>; + }; + }; + }; +}; + +&u3phy0 { + status = "okay"; +}; + +&u3phy1 { + status = "okay"; + + u3port1: usb-phy@700 { + mediatek,force-mode; + }; +}; + +&u3phy2 { + status = "okay"; +}; + +&u3phy3 { + status = "okay"; +}; + +&uart0 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&uart1 { + pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&ufsphy { + status = "disabled"; +}; + +&ssusb0 { + dr_mode = "otg"; + pinctrl-names = "default"; + pinctrl-0 = <&u3_p0_vbus>; + usb-role-switch; + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mtu3_hs0_role_sw: endpoint { + remote-endpoint = <&typec_con_hs>; + }; + }; + + port@1 { + reg = <1>; + mtu3_ss0_role_sw: endpoint { + remote-endpoint = <&typec_con_ss>; + }; + }; + }; +}; + +&ssusb2 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&ssusb3 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&vdosys0 { + port { + #address-cells = <1>; + #size-cells = <0>; + + vdosys0_ep_main: endpoint@0 { + reg = <0>; + remote-endpoint = <&ovl0_in>; + }; + }; +}; + +&xhci0 { + status = "okay"; +}; + +&xhci1 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&xhci2 { + status = "okay"; +}; + +&xhci3 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile index 171e08c94d5a21..b139cbd144422e 100644 --- a/arch/arm64/boot/dts/nvidia/Makefile +++ b/arch/arm64/boot/dts/nvidia/Makefile @@ -3,6 +3,7 @@ # Enables support for device-tree overlays DTC_FLAGS_tegra210-p2371-2180 := -@ DTC_FLAGS_tegra210-p3450-0000 := -@ +DTC_FLAGS_tegra210-p3541-0000 := -@ DTC_FLAGS_tegra186-p2771-0000 := -@ DTC_FLAGS_tegra186-p3509-0000+p3636-0001 := -@ DTC_FLAGS_tegra194-p2972-0000 := -@ @@ -19,6 +20,7 @@ dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-2180.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2571.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p3450-0000.dtb +dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p3541-0000.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2894-0050-a08.dtb dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index 5bcccfef3f7f8c..26cd11a8a4a12c 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -175,6 +175,7 @@ i2c-bus { gic: interrupt-controller@50041000 { compatible = "arm,cortex-a15-gic"; + #address-cells = <0>; #interrupt-cells = <3>; interrupt-controller; reg = <0x0 0x50041000 0x0 0x1000>, @@ -271,7 +272,7 @@ gpio: gpio@6000d000 { interrupt-controller; }; - apbdma: dma@60020000 { + apbdma: dma-controller@60020000 { compatible = "nvidia,tegra124-apbdma", "nvidia,tegra148-apbdma"; reg = <0x0 0x60020000 0x0 0x1400>; interrupts = , diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts index 5f3f572ecea97e..d9aafe05311215 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts @@ -671,7 +671,6 @@ connector { vbus-gpios = <&gpio TEGRA186_MAIN_GPIO(L, 4) GPIO_ACTIVE_LOW>; - id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 5778c93af3e6e7..b006304519096a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -36,6 +36,12 @@ gpio: gpio@2200000 { interrupt-controller; #gpio-cells = <2>; gpio-controller; + gpio-ranges = <&pinmux 0 0 140>; + }; + + pinmux: pinmux@2430000 { + compatible = "nvidia,tegra186-pinmux"; + reg = <0x0 0x2430000 0x0 0x15000>; }; ethernet@2490000 { @@ -1173,6 +1179,7 @@ fuse@3820000 { gic: interrupt-controller@3881000 { compatible = "arm,gic-400"; + #address-cells = <0>; #interrupt-cells = <3>; interrupt-controller; reg = <0x0 0x03881000 0x0 0x1000>, @@ -1274,10 +1281,16 @@ gpio_aon: gpio@c2f0000 { interrupts = ; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pinmux_aon 0 0 47>; interrupt-controller; #interrupt-cells = <2>; }; + pinmux_aon: pinmux@c300000 { + compatible = "nvidia,tegra186-pinmux-aon"; + reg = <0x0 0xc300000 0x0 0x4000>; + }; + pwm4: pwm@c340000 { compatible = "nvidia,tegra186-pwm"; reg = <0x0 0xc340000 0x0 0x10000>; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi index 1399342f23e1c4..b782f8db1288a6 100644 --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -1331,6 +1331,7 @@ fuse@3820000 { gic: interrupt-controller@3881000 { compatible = "arm,gic-400"; + #address-cells = <0>; #interrupt-cells = <3>; interrupt-controller; reg = <0x0 0x03881000 0x0 0x1000>, diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi index e07aeeee358671..9ee7952af79977 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi @@ -18,6 +18,12 @@ chosen { stdout-path = "serial0:115200n8"; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + }; + memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0x1 0x0>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index 584461f3a6196c..4a64fe510f0355 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -20,10 +20,10 @@ dpaux@54040000 { vi@54080000 { status = "okay"; - avdd-dsi-csi-supply = <&vdd_dsi_csi>; - csi@838 { status = "okay"; + + avdd-dsi-csi-supply = <&vdd_dsi_csi>; }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index ec0e84cb83ef9b..d78b9bd45df6cc 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -22,6 +22,12 @@ chosen { stdout-path = "serial0:115200n8"; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + }; + memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0x1 0x0>; @@ -64,10 +70,10 @@ dpaux@54040000 { vi@54080000 { status = "okay"; - avdd-dsi-csi-supply = <&vdd_sys_1v2>; - csi@838 { status = "okay"; + + avdd-dsi-csi-supply = <&vdd_sys_1v2>; }; }; @@ -520,7 +526,7 @@ pcie-6 { ports { usb2-0 { status = "okay"; - mode = "peripheral"; + mode = "otg"; usb-role-switch; vbus-supply = <&vdd_5v0_usb>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3541-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3541-0000.dts new file mode 100644 index 00000000000000..b86e271dde0bee --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3541-0000.dts @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra210-p3450-0000.dts" + +/ { + model = "NVIDIA Jetson Nano 2GB Developer Kit"; + compatible = "nvidia,p3541-0000", "nvidia,p3450-0000", "nvidia,tegra210"; + + memory@80000000 { + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + + host1x@50000000 { + sor@54540000 { + status = "disabled"; + }; + + dpaux@545c0000 { + status = "disabled"; + }; + }; + + padctl@7009f000 { + ports { + usb2-1 { + vbus-supply = <&vdd_hub_5v0>; + }; + + usb2-2 { + vbus-supply = <&vdd_hub_5v0>; + }; + + usb3-0 { + /delete-property/ vbus-supply; + }; + }; + }; + + regulator-vdd-hdmi-5v0 { + gpio = <&gpio TEGRA_GPIO(A, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + /delete-node/ regulator-vdd-hub-3v3; + + vdd_hub_5v0: regulator-vdd-hub-5v0 { + compatible = "regulator-fixed"; + + regulator-name = "VDD_HUB_5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio TEGRA_GPIO(I, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vdd_5v0_sys>; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-peripherals-opp.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-peripherals-opp.dtsi new file mode 100644 index 00000000000000..bf2527d737932a --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra210-peripherals-opp.dtsi @@ -0,0 +1,135 @@ +// SPDX-License-Identifier: GPL-2.0 + +/ { + /* EMC DVFS OPP table */ + emc_icc_dvfs_opp_table: opp-table-dvfs0 { + compatible = "operating-points-v2"; + + opp-40800000-800 { + opp-microvolt = <800000 800000 1150000>; + opp-hz = /bits/ 64 <40800000>; + opp-supported-hw = <0x0003>; + }; + + opp-68000000-800 { + opp-microvolt = <800000 800000 1150000>; + opp-hz = /bits/ 64 <68000000>; + opp-supported-hw = <0x0003>; + }; + + opp-102000000-800 { + opp-microvolt = <800000 800000 1150000>; + opp-hz = /bits/ 64 <102000000>; + opp-supported-hw = <0x0003>; + }; + + opp-204000000-800 { + opp-microvolt = <800000 800000 1150000>; + opp-hz = /bits/ 64 <204000000>; + opp-supported-hw = <0x0007>; + opp-suspend; + }; + + opp-408000000-812 { + opp-microvolt = <812000 812000 1150000>; + opp-hz = /bits/ 64 <408000000>; + opp-supported-hw = <0x0003>; + }; + + opp-665600000-825 { + opp-microvolt = <825000 825000 1150000>; + opp-hz = /bits/ 64 <665600000>; + opp-supported-hw = <0x0003>; + }; + + opp-800000000-825 { + opp-microvolt = <825000 825000 1150000>; + opp-hz = /bits/ 64 <800000000>; + opp-supported-hw = <0x0003>; + }; + + opp-1065600000-837 { + opp-microvolt = <837000 837000 1150000>; + opp-hz = /bits/ 64 <1065600000>; + opp-supported-hw = <0x0003>; + }; + + opp-1331200000-850 { + opp-microvolt = <850000 850000 1150000>; + opp-hz = /bits/ 64 <1331200000>; + opp-supported-hw = <0x0003>; + }; + + opp-1600000000-887 { + opp-microvolt = <887000 887000 1150000>; + opp-hz = /bits/ 64 <1600000000>; + opp-supported-hw = <0x0007>; + }; + }; + + /* EMC bandwidth OPP table */ + emc_bw_dfs_opp_table: opp-table-dvfs1 { + compatible = "operating-points-v2"; + + opp-40800000 { + opp-hz = /bits/ 64 <40800000>; + opp-supported-hw = <0x0003>; + opp-peak-kBps = <652800>; + }; + + opp-68000000 { + opp-hz = /bits/ 64 <68000000>; + opp-supported-hw = <0x0003>; + opp-peak-kBps = <1088000>; + }; + + opp-102000000 { + opp-hz = /bits/ 64 <102000000>; + opp-supported-hw = <0x0003>; + opp-peak-kBps = <1632000>; + }; + + opp-204000000 { + opp-hz = /bits/ 64 <204000000>; + opp-supported-hw = <0x0007>; + opp-peak-kBps = <3264000>; + opp-suspend; + }; + + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-supported-hw = <0x0003>; + opp-peak-kBps = <6528000>; + }; + + opp-665600000 { + opp-hz = /bits/ 64 <665600000>; + opp-supported-hw = <0x0003>; + opp-peak-kBps = <10649600>; + }; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-supported-hw = <0x001F>; + opp-peak-kBps = <12800000>; + }; + + opp-1065600000 { + opp-hz = /bits/ 64 <1065600000>; + opp-supported-hw = <0x0003>; + opp-peak-kBps = <17049600>; + }; + + opp-1331200000 { + opp-hz = /bits/ 64 <1331200000>; + opp-supported-hw = <0x0003>; + opp-peak-kBps = <21299200>; + }; + + opp-1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-supported-hw = <0x0007>; + opp-peak-kBps = <25600000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 402b0ede1472af..709da31d57851a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -9,6 +9,8 @@ #include #include +#include "tegra210-peripherals-opp.dtsi" + / { compatible = "nvidia,tegra210"; interrupt-parent = <&lic>; @@ -183,9 +185,7 @@ tsec@54100000 { reg = <0x0 0x54100000 0x0 0x00040000>; interrupts = ; clocks = <&tegra_car TEGRA210_CLK_TSEC>; - clock-names = "tsec"; resets = <&tegra_car 83>; - reset-names = "tsec"; status = "disabled"; }; @@ -202,6 +202,19 @@ dc@54200000 { nvidia,outputs = <&dsia &dsib &sor0 &sor1>; nvidia,head = <0>; + + interconnects = <&mc TEGRA210_MC_DISPLAY0A &emc>, + <&mc TEGRA210_MC_DISPLAY0B &emc>, + <&mc TEGRA210_MC_DISPLAY0C &emc>, + <&mc TEGRA210_MC_DISPLAYHC &emc>, + <&mc TEGRA210_MC_DISPLAYD &emc>, + <&mc TEGRA210_MC_DISPLAYT &emc>; + interconnect-names = "wina", + "winb", + "winc", + "cursor", + "wind", + "wint"; }; dc@54240000 { @@ -217,6 +230,15 @@ dc@54240000 { nvidia,outputs = <&dsia &dsib &sor0 &sor1>; nvidia,head = <1>; + + interconnects = <&mc TEGRA210_MC_DISPLAY0AB &emc>, + <&mc TEGRA210_MC_DISPLAY0BB &emc>, + <&mc TEGRA210_MC_DISPLAY0CB &emc>, + <&mc TEGRA210_MC_DISPLAYHCB &emc>; + interconnect-names = "wina", + "winb", + "winc", + "cursor"; }; dsia: dsi@54300000 { @@ -253,7 +275,13 @@ vic@54340000 { nvjpg@54380000 { compatible = "nvidia,tegra210-nvjpg"; reg = <0x0 0x54380000 0x0 0x00040000>; - status = "disabled"; + clocks = <&tegra_car TEGRA210_CLK_NVJPG>; + clock-names = "nvjpg"; + resets = <&tegra_car 195>; + reset-names = "nvjpg"; + + iommus = <&mc TEGRA_SWGROUP_NVJPG>; + power-domains = <&pd_nvjpg>; }; dsib: dsi@54400000 { @@ -277,13 +305,25 @@ dsib: dsi@54400000 { nvdec@54480000 { compatible = "nvidia,tegra210-nvdec"; reg = <0x0 0x54480000 0x0 0x00040000>; - status = "disabled"; + clocks = <&tegra_car TEGRA210_CLK_NVDEC>; + clock-names = "nvdec"; + resets = <&tegra_car 194>; + reset-names = "nvdec"; + + iommus = <&mc TEGRA_SWGROUP_NVDEC>; + power-domains = <&pd_nvdec>; }; nvenc@544c0000 { compatible = "nvidia,tegra210-nvenc"; reg = <0x0 0x544c0000 0x0 0x00040000>; - status = "disabled"; + clocks = <&tegra_car TEGRA210_CLK_NVENC>; + clock-names = "nvenc"; + resets = <&tegra_car 219>; + reset-names = "nvenc"; + + iommus = <&mc TEGRA_SWGROUP_NVENC>; + power-domains = <&pd_nvenc>; }; tsec@54500000 { @@ -409,6 +449,7 @@ i2c@546c0000 { gic: interrupt-controller@50041000 { compatible = "arm,gic-400"; + #address-cells = <0>; #interrupt-cells = <3>; interrupt-controller; reg = <0x0 0x50041000 0x0 0x1000>, @@ -485,6 +526,21 @@ flow-controller@60007000 { reg = <0x0 0x60007000 0x0 0x1000>; }; + actmon@6000c800 { + compatible = "nvidia,tegra210-actmon", "nvidia,tegra124-actmon"; + reg = <0x0 0x6000c800 0x0 0x400>; + interrupts = ; + clocks = <&tegra_car TEGRA210_CLK_ACTMON>, + <&tegra_car TEGRA210_CLK_EMC>; + clock-names = "actmon", "emc"; + resets = <&tegra_car 119>; + reset-names = "actmon"; + operating-points-v2 = <&emc_bw_dfs_opp_table>; + interconnects = <&mc TEGRA210_MC_MPCORER &emc>; + interconnect-names = "cpu-read"; + #cooling-cells = <2>; + }; + gpio: gpio@6000d000 { compatible = "nvidia,tegra210-gpio", "nvidia,tegra30-gpio"; reg = <0x0 0x6000d000 0x0 0x1000>; @@ -502,7 +558,7 @@ gpio: gpio@6000d000 { interrupt-controller; }; - apbdma: dma@60020000 { + apbdma: dma-controller@60020000 { compatible = "nvidia,tegra210-apbdma", "nvidia,tegra148-apbdma"; reg = <0x0 0x60020000 0x0 0x1400>; interrupts = , @@ -894,6 +950,18 @@ pd_audio: aud { #power-domain-cells = <0>; }; + pd_nvenc: mpe { + clocks = <&tegra_car TEGRA210_CLK_NVENC>; + resets = <&tegra_car 219>; + #power-domain-cells = <0>; + }; + + pd_nvdec: nvdec { + clocks = <&tegra_car TEGRA210_CLK_NVDEC>; + resets = <&tegra_car 194>; + #power-domain-cells = <0>; + }; + pd_sor: sor { clocks = <&tegra_car TEGRA210_CLK_SOR0>, <&tegra_car TEGRA210_CLK_SOR1>, @@ -947,6 +1015,12 @@ pd_xusbhost: xusbc { resets = <&tegra_car TEGRA210_CLK_XUSB_HOST>; #power-domain-cells = <0>; }; + + pd_nvjpg: nvjpg { + clocks = <&tegra_car TEGRA210_CLK_NVJPG>; + resets = <&tegra_car 195>; + #power-domain-cells = <0>; + }; }; }; @@ -978,6 +1052,7 @@ mc: memory-controller@70019000 { #iommu-cells = <1>; #reset-cells = <1>; + #interconnect-cells = <1>; }; emc: external-memory-controller@7001b000 { @@ -989,6 +1064,9 @@ emc: external-memory-controller@7001b000 { clock-names = "emc"; interrupts = ; nvidia,memory-controller = <&mc>; + operating-points-v2 = <&emc_icc_dvfs_opp_table>; + + #interconnect-cells = <0>; #cooling-cells = <2>; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi index 9086a0d010e5c5..58bf55c0e414ca 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701.dtsi @@ -8,6 +8,7 @@ / { aliases { mmc0 = "/bus@0/mmc@3460000"; mmc1 = "/bus@0/mmc@3400000"; + rtc0 = "/bpmp/i2c/pmic@3c"; }; bus@0 { @@ -170,6 +171,16 @@ bpmp { i2c { status = "okay"; + pmic@3c { + compatible = "nvidia,vrs-10"; + reg = <0x3c>; + interrupt-parent = <&pmc>; + /* VRS Wake ID is 24 */ + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + }; + thermal-sensor@4c { compatible = "ti,tmp451"; status = "okay"; diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi index 84db7132e8fc83..ab391a71c3d338 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3767.dtsi @@ -7,6 +7,7 @@ / { aliases { mmc0 = "/bus@0/mmc@3400000"; + rtc0 = "/bpmp/i2c/pmic@3c"; }; bus@0 { @@ -121,6 +122,20 @@ pmc@c360000 { }; }; + bpmp { + i2c { + pmic@3c { + compatible = "nvidia,vrs-10"; + reg = <0x3c>; + interrupt-parent = <&pmc>; + /* VRS Wake ID is 24 */ + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + }; + vdd_5v0_sys: regulator-vdd-5v0-sys { compatible = "regulator-fixed"; regulator-name = "VDD_5V0_SYS"; diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi index df034dbb82853e..827dbb42082619 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi @@ -9,6 +9,7 @@ #include #include #include +#include / { compatible = "nvidia,tegra234"; @@ -127,6 +128,56 @@ gpio: gpio@2200000 { pinmux: pinmux@2430000 { compatible = "nvidia,tegra234-pinmux"; reg = <0x0 0x2430000 0x0 0x19100>; + + pex_rst_c4_in_state: pinmux-pex-rst-c4-in { + pex_rst { + nvidia,pins = "pex_l4_rst_n_pl1"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + }; + + pex_rst_c5_in_state: pinmux-pex-rst-c5-in { + pex_rst { + nvidia,pins = "pex_l5_rst_n_paf1"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + }; + + pex_rst_c6_in_state: pinmux-pex-rst-c6-in { + pex_rst { + nvidia,pins = "pex_l6_rst_n_paf3"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + }; + + pex_rst_c7_in_state: pinmux-pex-rst-c7-in { + pex_rst { + nvidia,pins = "pex_l7_rst_n_pag1"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + }; + + pex_rst_c10_in_state: pinmux-pex-rst-c10-in { + pex_rst { + nvidia,pins = "pex_l10_rst_n_pag7"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + }; }; gpcdma: dma-controller@2600000 { @@ -3276,8 +3327,15 @@ usb@3610000 { <0x0 0x03650000 0x0 0x10000>; reg-names = "hcd", "fpci", "bar2"; - interrupts = , - ; + interrupts-extended = <&gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <&pmc 76 IRQ_TYPE_LEVEL_HIGH>, + <&pmc 77 IRQ_TYPE_LEVEL_HIGH>, + <&pmc 78 IRQ_TYPE_LEVEL_HIGH>, + <&pmc 79 IRQ_TYPE_LEVEL_HIGH>, + <&pmc 80 IRQ_TYPE_LEVEL_HIGH>, + <&pmc 81 IRQ_TYPE_LEVEL_HIGH>, + <&pmc 82 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA234_CLK_XUSB_CORE_HOST>, <&bpmp TEGRA234_CLK_XUSB_FALCON>, @@ -4630,6 +4688,8 @@ pcie-ep@140e0000 { <&bpmp TEGRA234_RESET_PEX2_CORE_10>; reset-names = "apb", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&pex_rst_c10_in_state>; interrupts = ; /* controller interrupt */ interrupt-names = "intr"; @@ -4881,6 +4941,8 @@ pcie-ep@14160000 { <&bpmp TEGRA234_RESET_PEX0_CORE_4>; reset-names = "apb", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&pex_rst_c4_in_state>; interrupts = ; /* controller interrupt */ interrupt-names = "intr"; nvidia,bpmp = <&bpmp 4>; @@ -5023,6 +5085,8 @@ pcie-ep@141a0000 { <&bpmp TEGRA234_RESET_PEX1_CORE_5>; reset-names = "apb", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&pex_rst_c5_in_state>; interrupts = ; /* controller interrupt */ interrupt-names = "intr"; @@ -5115,6 +5179,8 @@ pcie-ep@141c0000 { <&bpmp TEGRA234_RESET_PEX1_CORE_6>; reset-names = "apb", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&pex_rst_c6_in_state>; interrupts = ; /* controller interrupt */ interrupt-names = "intr"; @@ -5207,6 +5273,8 @@ pcie-ep@141e0000 { <&bpmp TEGRA234_RESET_PEX2_CORE_7>; reset-names = "apb", "core"; + pinctrl-names = "default"; + pinctrl-0 = <&pex_rst_c7_in_state>; interrupts = ; /* controller interrupt */ interrupt-names = "intr"; diff --git a/arch/arm64/boot/dts/nvidia/tegra264-p3971.dtsi b/arch/arm64/boot/dts/nvidia/tegra264-p3971.dtsi index 6b6259b7310fb1..b1bd4ee7aee308 100644 --- a/arch/arm64/boot/dts/nvidia/tegra264-p3971.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra264-p3971.dtsi @@ -1,4 +1,112 @@ // SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause / { + bus@0 { + aconnect@9000000 { + status = "okay"; + + dma-controller@9440000 { + status = "okay"; + }; + + ahub@9630000 { + status = "okay"; + + i2s@9280000 { + status = "okay"; + }; + + i2s@9290000 { + status = "okay"; + }; + + i2s@92b0000 { + status = "okay"; + }; + }; + + interrupt-controller@9960000 { + status = "okay"; + }; + }; + }; + + bus@8800000000 { + hda@90b0000 { + nvidia,model = "NVIDIA Jetson Thor AGX HDA"; + status = "okay"; + }; + }; + + sound { + status = "okay"; + + dais = /* ADMAIF (FE) Ports */ + <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>, + <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>, + <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>, + <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>, + <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>, + <&admaif20_port>, <&admaif21_port>, <&admaif22_port>, <&admaif23_port>, + <&admaif24_port>, <&admaif25_port>, <&admaif26_port>, <&admaif27_port>, + <&admaif28_port>, <&admaif29_port>, <&admaif30_port>, <&admaif31_port>, + /* XBAR Ports */ + <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s4_port>, + <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>, + <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>, + <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>, + <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>, + <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>, + <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>, + <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>, + <&xbar_amx3_in1_port>, <&xbar_amx3_in2_port>, + <&xbar_amx3_in3_port>, <&xbar_amx3_in4_port>, + <&xbar_amx4_in1_port>, <&xbar_amx4_in2_port>, + <&xbar_amx4_in3_port>, <&xbar_amx4_in4_port>, + <&xbar_amx5_in1_port>, <&xbar_amx5_in2_port>, + <&xbar_amx5_in3_port>, <&xbar_amx5_in4_port>, + <&xbar_amx6_in1_port>, <&xbar_amx6_in2_port>, + <&xbar_amx6_in3_port>, <&xbar_amx6_in4_port>, + <&xbar_adx1_in_port>, <&xbar_adx2_in_port>, + <&xbar_adx3_in_port>, <&xbar_adx4_in_port>, + <&xbar_adx5_in_port>, <&xbar_adx6_in_port>, + <&xbar_mix_in1_port>, <&xbar_mix_in2_port>, + <&xbar_mix_in3_port>, <&xbar_mix_in4_port>, + <&xbar_mix_in5_port>, <&xbar_mix_in6_port>, + <&xbar_mix_in7_port>, <&xbar_mix_in8_port>, + <&xbar_mix_in9_port>, <&xbar_mix_in10_port>, + <&xbar_asrc_in1_port>, <&xbar_asrc_in2_port>, + <&xbar_asrc_in3_port>, <&xbar_asrc_in4_port>, + <&xbar_asrc_in5_port>, <&xbar_asrc_in6_port>, + <&xbar_asrc_in7_port>, + <&xbar_ope1_in_port>, + /* HW accelerators */ + <&sfc1_out_port>, <&sfc2_out_port>, + <&sfc3_out_port>, <&sfc4_out_port>, + <&mvc1_out_port>, <&mvc2_out_port>, + <&amx1_out_port>, <&amx2_out_port>, + <&amx3_out_port>, <&amx4_out_port>, + <&amx5_out_port>, <&amx6_out_port>, + <&adx1_out1_port>, <&adx1_out2_port>, + <&adx1_out3_port>, <&adx1_out4_port>, + <&adx2_out1_port>, <&adx2_out2_port>, + <&adx2_out3_port>, <&adx2_out4_port>, + <&adx3_out1_port>, <&adx3_out2_port>, + <&adx3_out3_port>, <&adx3_out4_port>, + <&adx4_out1_port>, <&adx4_out2_port>, + <&adx4_out3_port>, <&adx4_out4_port>, + <&adx5_out1_port>, <&adx5_out2_port>, + <&adx5_out3_port>, <&adx5_out4_port>, + <&adx6_out1_port>, <&adx6_out2_port>, + <&adx6_out3_port>, <&adx6_out4_port>, + <&mix_out1_port>, <&mix_out2_port>, <&mix_out3_port>, + <&mix_out4_port>, <&mix_out5_port>, + <&asrc_out1_port>, <&asrc_out2_port>, <&asrc_out3_port>, + <&asrc_out4_port>, <&asrc_out5_port>, <&asrc_out6_port>, + <&ope1_out_port>, + /* BE I/O Ports */ + <&i2s1_port>, <&i2s2_port>, <&i2s4_port>; + + label = "NVIDIA Jetson Thor AGX APE"; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra264.dtsi b/arch/arm64/boot/dts/nvidia/tegra264.dtsi index 872a69553e3c82..f137565da80489 100644 --- a/arch/arm64/boot/dts/nvidia/tegra264.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra264.dtsi @@ -4,6 +4,7 @@ #include #include #include +#include #include / { @@ -49,6 +50,3163 @@ timer@8000000 { status = "disabled"; }; + aconnect@9000000 { + compatible = "nvidia,tegra264-aconnect", + "nvidia,tegra210-aconnect"; + clocks = <&bpmp TEGRA264_CLK_APE>, + <&bpmp TEGRA264_CLK_ADSP>; + clock-names = "ape", "apb2ape"; + power-domains = <&bpmp TEGRA264_POWER_DOMAIN_AUD>; + status = "disabled"; + + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x9000000 0x0 0x9000000 0x0 0x2000000>; + + adma: dma-controller@9440000 { + compatible = "nvidia,tegra264-adma"; + reg = <0x0 0x9440000 0x0 0xb0000>; + interrupt-parent = <&agic_page0>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + #dma-cells = <1>; + clocks = <&bpmp TEGRA264_CLK_AHUB>; + clock-names = "d_audio"; + status = "disabled"; + }; + + tegra_ahub: ahub@9630000 { + compatible = "nvidia,tegra264-ahub"; + reg = <0x0 0x9630000 0x0 0x10000>; + clocks = <&bpmp TEGRA264_CLK_AHUB>; + clock-names = "ahub"; + assigned-clocks = <&bpmp TEGRA264_CLK_AHUB>; + assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLAON_APE>; + status = "disabled"; + + #address-cells = <2>; + #size-cells = <2>; + /* ADMA is under AHUB range, its excluded in the defined range */ + ranges = <0x0 0x9280000 0x0 0x9280000 0x0 0x1c0000>, + <0x0 0x9510000 0x0 0x9510000 0x0 0x370000>; + + tegra_i2s1: i2s@9280000 { + compatible = "nvidia,tegra264-i2s"; + reg = <0x0 0x9280000 0x0 0x10000>; + clocks = <&bpmp TEGRA264_CLK_I2S1>, + <&bpmp TEGRA264_CLK_I2S1_SCLK_IN>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA264_CLK_I2S1>; + assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S1"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s1_cif: endpoint { + remote-endpoint = <&xbar_i2s1>; + }; + }; + + i2s1_port: port@1 { + reg = <1>; + + i2s1_dap: endpoint { + dai-format = "i2s"; + /* placeholder for external codec */ + }; + }; + }; + }; + + tegra_i2s2: i2s@9290000 { + compatible = "nvidia,tegra264-i2s"; + reg = <0x0 0x9290000 0x0 0x10000>; + clocks = <&bpmp TEGRA264_CLK_I2S2>, + <&bpmp TEGRA264_CLK_I2S2_SCLK_IN>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA264_CLK_I2S2>; + assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S2"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s2_cif: endpoint { + remote-endpoint = <&xbar_i2s2>; + }; + }; + + i2s2_port: port@1 { + reg = <1>; + + i2s2_dap: endpoint { + dai-format = "i2s"; + /* placeholder for external codec */ + }; + }; + }; + }; + + tegra_i2s3: i2s@92a0000 { + compatible = "nvidia,tegra264-i2s"; + reg = <0x0 0x92a0000 0x0 0x10000>; + clocks = <&bpmp TEGRA264_CLK_I2S3>, + <&bpmp TEGRA264_CLK_I2S3_SCLK_IN>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA264_CLK_I2S3>; + assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S3"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s3_cif: endpoint { + remote-endpoint = <&xbar_i2s3>; + }; + }; + + i2s3_port: port@1 { + reg = <1>; + + i2s3_dap: endpoint { + dai-format = "i2s"; + /* placeholder for external codec */ + }; + }; + }; + }; + + tegra_i2s4: i2s@92b0000 { + compatible = "nvidia,tegra264-i2s"; + reg = <0x0 0x92b0000 0x0 0x10000>; + clocks = <&bpmp TEGRA264_CLK_I2S4>, + <&bpmp TEGRA264_CLK_I2S4_SCLK_IN>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA264_CLK_I2S4>; + assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S4"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s4_cif: endpoint { + remote-endpoint = <&xbar_i2s4>; + }; + }; + + i2s4_port: port@1 { + reg = <1>; + + i2s4_dap: endpoint { + dai-format = "i2s"; + /* placeholder for external codec */ + }; + }; + }; + }; + + tegra_i2s5: i2s@92c0000 { + compatible = "nvidia,tegra264-i2s"; + reg = <0x0 0x92c0000 0x0 0x10000>; + clocks = <&bpmp TEGRA264_CLK_I2S5>, + <&bpmp TEGRA264_CLK_I2S5_SCLK_IN>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA264_CLK_I2S5>; + assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S5"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s5_cif: endpoint { + remote-endpoint = <&xbar_i2s5>; + }; + }; + + i2s5_port: port@1 { + reg = <1>; + + i2s5_dap: endpoint { + dai-format = "i2s"; + /* placeholder for external codec */ + }; + }; + }; + }; + + tegra_i2s6: i2s@92d0000 { + compatible = "nvidia,tegra264-i2s"; + reg = <0x0 0x92d0000 0x0 0x10000>; + clocks = <&bpmp TEGRA264_CLK_I2S6>, + <&bpmp TEGRA264_CLK_I2S6_SCLK_IN>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA264_CLK_I2S6>; + assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S6"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s6_cif: endpoint { + remote-endpoint = <&xbar_i2s6>; + }; + }; + + i2s6_port: port@1 { + reg = <1>; + + i2s6_dap: endpoint { + dai-format = "i2s"; + /* placeholder for external codec */ + }; + }; + }; + }; + + tegra_i2s7: i2s@92e0000 { + compatible = "nvidia,tegra264-i2s"; + reg = <0x0 0x92e0000 0x0 0x10000>; + clocks = <&bpmp TEGRA264_CLK_I2S7>, + <&bpmp TEGRA264_CLK_I2S7_SCLK_IN>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA264_CLK_I2S7>; + assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S7"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s7_cif: endpoint { + remote-endpoint = <&xbar_i2s7>; + }; + }; + + i2s7_port: port@1 { + reg = <1>; + + i2s7_dap: endpoint { + dai-format = "i2s"; + /* placeholder for external codec */ + }; + }; + }; + }; + + tegra_i2s8: i2s@92f0000 { + compatible = "nvidia,tegra264-i2s"; + reg = <0x0 0x92f0000 0x0 0x10000>; + clocks = <&bpmp TEGRA264_CLK_I2S8>, + <&bpmp TEGRA264_CLK_I2S8_SCLK_IN>; + clock-names = "i2s", "sync_input"; + assigned-clocks = <&bpmp TEGRA264_CLK_I2S8>; + assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>; + assigned-clock-rates = <1536000>; + sound-name-prefix = "I2S8"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + i2s8_cif: endpoint { + remote-endpoint = <&xbar_i2s8>; + }; + }; + + i2s8_port: port@1 { + reg = <1>; + + i2s8_dap: endpoint { + dai-format = "i2s"; + /* placeholder for external codec */ + }; + }; + }; + }; + + tegra_dmic1: dmic@9300000 { + compatible = "nvidia,tegra264-dmic", + "nvidia,tegra210-dmic"; + reg = <0x0 0x9300000 0x0 0x10000>; + clocks = <&bpmp TEGRA264_CLK_DMIC1>; + clock-names = "dmic"; + assigned-clocks = <&bpmp TEGRA264_CLK_DMIC1>; + assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC1"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic1_cif: endpoint { + remote-endpoint = <&xbar_dmic1>; + }; + }; + + dmic1_port: port@1 { + reg = <1>; + + dmic1_dap: endpoint { + /* placeholder for external codec */ + }; + }; + }; + }; + + tegra_dmic2: dmic@9310000 { + compatible = "nvidia,tegra264-dmic", + "nvidia,tegra210-dmic"; + reg = <0x0 0x9310000 0x0 0x10000>; + clocks = <&bpmp TEGRA264_CLK_DMIC1>; + clock-names = "dmic"; + assigned-clocks = <&bpmp TEGRA264_CLK_DMIC1>; + assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>; + assigned-clock-rates = <3072000>; + sound-name-prefix = "DMIC2"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dmic2_cif: endpoint { + remote-endpoint = <&xbar_dmic2>; + }; + }; + + dmic2_port: port@1 { + reg = <1>; + + dmic2_dap: endpoint { + /* placeholder for external codec */ + }; + }; + }; + }; + + tegra_dspk1: dspk@9380000 { + compatible = "nvidia,tegra264-dspk", + "nvidia,tegra186-dspk"; + reg = <0x0 0x9380000 0x0 0x10000>; + clocks = <&bpmp TEGRA264_CLK_DSPK1>; + clock-names = "dspk"; + assigned-clocks = <&bpmp TEGRA264_CLK_DSPK1>; + assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLA1_OUT1>; + assigned-clock-rates = <12288000>; + sound-name-prefix = "DSPK1"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dspk1_cif: endpoint { + remote-endpoint = <&xbar_dspk1>; + }; + }; + + dspk1_port: port@1 { + reg = <1>; + + dspk1_dap: endpoint { + /* placeholder for external codec */ + }; + }; + }; + }; + + tegra_amx1: amx@9510000 { + compatible = "nvidia,tegra264-amx"; + reg = <0x0 0x9510000 0x0 0x10000>; + sound-name-prefix = "AMX1"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx1_in1: endpoint { + remote-endpoint = <&xbar_amx1_in1>; + }; + }; + + port@1 { + reg = <1>; + + amx1_in2: endpoint { + remote-endpoint = <&xbar_amx1_in2>; + }; + }; + + port@2 { + reg = <2>; + + amx1_in3: endpoint { + remote-endpoint = <&xbar_amx1_in3>; + }; + }; + + port@3 { + reg = <3>; + + amx1_in4: endpoint { + remote-endpoint = <&xbar_amx1_in4>; + }; + }; + + amx1_out_port: port@4 { + reg = <4>; + + amx1_out: endpoint { + remote-endpoint = <&xbar_amx1_out>; + }; + }; + }; + }; + + tegra_amx2: amx@9520000 { + compatible = "nvidia,tegra264-amx"; + reg = <0x0 0x9520000 0x0 0x10000>; + sound-name-prefix = "AMX2"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx2_in1: endpoint { + remote-endpoint = <&xbar_amx2_in1>; + }; + }; + + port@1 { + reg = <1>; + + amx2_in2: endpoint { + remote-endpoint = <&xbar_amx2_in2>; + }; + }; + + port@2 { + reg = <2>; + + amx2_in3: endpoint { + remote-endpoint = <&xbar_amx2_in3>; + }; + }; + + port@3 { + reg = <3>; + + amx2_in4: endpoint { + remote-endpoint = <&xbar_amx2_in4>; + }; + }; + + amx2_out_port: port@4 { + reg = <4>; + + amx2_out: endpoint { + remote-endpoint = <&xbar_amx2_out>; + }; + }; + }; + }; + + tegra_amx3: amx@9530000 { + compatible = "nvidia,tegra264-amx"; + reg = <0x0 0x9530000 0x0 0x10000>; + sound-name-prefix = "AMX3"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx3_in1: endpoint { + remote-endpoint = <&xbar_amx3_in1>; + }; + }; + + port@1 { + reg = <1>; + + amx3_in2: endpoint { + remote-endpoint = <&xbar_amx3_in2>; + }; + }; + + port@2 { + reg = <2>; + + amx3_in3: endpoint { + remote-endpoint = <&xbar_amx3_in3>; + }; + }; + + port@3 { + reg = <3>; + + amx3_in4: endpoint { + remote-endpoint = <&xbar_amx3_in4>; + }; + }; + + amx3_out_port: port@4 { + reg = <4>; + + amx3_out: endpoint { + remote-endpoint = <&xbar_amx3_out>; + }; + }; + }; + }; + + tegra_amx4: amx@9540000 { + compatible = "nvidia,tegra264-amx"; + reg = <0x0 0x9540000 0x0 0x10000>; + sound-name-prefix = "AMX4"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx4_in1: endpoint { + remote-endpoint = <&xbar_amx4_in1>; + }; + }; + + port@1 { + reg = <1>; + + amx4_in2: endpoint { + remote-endpoint = <&xbar_amx4_in2>; + }; + }; + + port@2 { + reg = <2>; + + amx4_in3: endpoint { + remote-endpoint = <&xbar_amx4_in3>; + }; + }; + + port@3 { + reg = <3>; + + amx4_in4: endpoint { + remote-endpoint = <&xbar_amx4_in4>; + }; + }; + + amx4_out_port: port@4 { + reg = <4>; + + amx4_out: endpoint { + remote-endpoint = <&xbar_amx4_out>; + }; + }; + }; + }; + + tegra_amx5: amx@9550000 { + compatible = "nvidia,tegra264-amx"; + reg = <0x0 0x9550000 0x0 0x10000>; + sound-name-prefix = "AMX5"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx5_in1: endpoint { + remote-endpoint = <&xbar_amx5_in1>; + }; + }; + + port@1 { + reg = <1>; + + amx5_in2: endpoint { + remote-endpoint = <&xbar_amx5_in2>; + }; + }; + + port@2 { + reg = <2>; + + amx5_in3: endpoint { + remote-endpoint = <&xbar_amx5_in3>; + }; + }; + + port@3 { + reg = <3>; + + amx5_in4: endpoint { + remote-endpoint = <&xbar_amx5_in4>; + }; + }; + + amx5_out_port: port@4 { + reg = <4>; + + amx5_out: endpoint { + remote-endpoint = <&xbar_amx5_out>; + }; + }; + }; + }; + + tegra_amx6: amx@9560000 { + compatible = "nvidia,tegra264-amx"; + reg = <0x0 0x9560000 0x0 0x10000>; + sound-name-prefix = "AMX6"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + amx6_in1: endpoint { + remote-endpoint = <&xbar_amx6_in1>; + }; + }; + + port@1 { + reg = <1>; + + amx6_in2: endpoint { + remote-endpoint = <&xbar_amx6_in2>; + }; + }; + + port@2 { + reg = <2>; + + amx6_in3: endpoint { + remote-endpoint = <&xbar_amx6_in3>; + }; + }; + + port@3 { + reg = <3>; + + amx6_in4: endpoint { + remote-endpoint = <&xbar_amx6_in4>; + }; + }; + + amx6_out_port: port@4 { + reg = <4>; + + amx6_out: endpoint { + remote-endpoint = <&xbar_amx6_out>; + }; + }; + }; + }; + + tegra_adx1: adx@9590000 { + compatible = "nvidia,tegra264-adx"; + reg = <0x0 0x9590000 0x0 0x10000>; + sound-name-prefix = "ADX1"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx1_in: endpoint { + remote-endpoint = <&xbar_adx1_in>; + }; + }; + + adx1_out1_port: port@1 { + reg = <1>; + + adx1_out1: endpoint { + remote-endpoint = <&xbar_adx1_out1>; + }; + }; + + adx1_out2_port: port@2 { + reg = <2>; + + adx1_out2: endpoint { + remote-endpoint = <&xbar_adx1_out2>; + }; + }; + + adx1_out3_port: port@3 { + reg = <3>; + + adx1_out3: endpoint { + remote-endpoint = <&xbar_adx1_out3>; + }; + }; + + adx1_out4_port: port@4 { + reg = <4>; + + adx1_out4: endpoint { + remote-endpoint = <&xbar_adx1_out4>; + }; + }; + }; + }; + + tegra_adx2: adx@95a0000 { + compatible = "nvidia,tegra264-adx"; + reg = <0x0 0x95a0000 0x0 0x10000>; + sound-name-prefix = "ADX2"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx2_in: endpoint { + remote-endpoint = <&xbar_adx2_in>; + }; + }; + + adx2_out1_port: port@1 { + reg = <1>; + + adx2_out1: endpoint { + remote-endpoint = <&xbar_adx2_out1>; + }; + }; + + adx2_out2_port: port@2 { + reg = <2>; + + adx2_out2: endpoint { + remote-endpoint = <&xbar_adx2_out2>; + }; + }; + + adx2_out3_port: port@3 { + reg = <3>; + + adx2_out3: endpoint { + remote-endpoint = <&xbar_adx2_out3>; + }; + }; + + adx2_out4_port: port@4 { + reg = <4>; + + adx2_out4: endpoint { + remote-endpoint = <&xbar_adx2_out4>; + }; + }; + }; + }; + + tegra_adx3: adx@95b0000 { + compatible = "nvidia,tegra264-adx"; + reg = <0x0 0x95b0000 0x0 0x10000>; + sound-name-prefix = "ADX3"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx3_in: endpoint { + remote-endpoint = <&xbar_adx3_in>; + }; + }; + + adx3_out1_port: port@1 { + reg = <1>; + + adx3_out1: endpoint { + remote-endpoint = <&xbar_adx3_out1>; + }; + }; + + adx3_out2_port: port@2 { + reg = <2>; + + adx3_out2: endpoint { + remote-endpoint = <&xbar_adx3_out2>; + }; + }; + + adx3_out3_port: port@3 { + reg = <3>; + + adx3_out3: endpoint { + remote-endpoint = <&xbar_adx3_out3>; + }; + }; + + adx3_out4_port: port@4 { + reg = <4>; + + adx3_out4: endpoint { + remote-endpoint = <&xbar_adx3_out4>; + }; + }; + }; + }; + + tegra_adx4: adx@95c0000 { + compatible = "nvidia,tegra264-adx"; + reg = <0x0 0x95c0000 0x0 0x10000>; + sound-name-prefix = "ADX4"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx4_in: endpoint { + remote-endpoint = <&xbar_adx4_in>; + }; + }; + + adx4_out1_port: port@1 { + reg = <1>; + + adx4_out1: endpoint { + remote-endpoint = <&xbar_adx4_out1>; + }; + }; + + adx4_out2_port: port@2 { + reg = <2>; + + adx4_out2: endpoint { + remote-endpoint = <&xbar_adx4_out2>; + }; + }; + + adx4_out3_port: port@3 { + reg = <3>; + + adx4_out3: endpoint { + remote-endpoint = <&xbar_adx4_out3>; + }; + }; + + adx4_out4_port: port@4 { + reg = <4>; + + adx4_out4: endpoint { + remote-endpoint = <&xbar_adx4_out4>; + }; + }; + }; + }; + + tegra_adx5: adx@95d0000 { + compatible = "nvidia,tegra264-adx"; + reg = <0x0 0x95d0000 0x0 0x10000>; + sound-name-prefix = "ADX5"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx5_in: endpoint { + remote-endpoint = <&xbar_adx5_in>; + }; + }; + + adx5_out1_port: port@1 { + reg = <1>; + + adx5_out1: endpoint { + remote-endpoint = <&xbar_adx5_out1>; + }; + }; + + adx5_out2_port: port@2 { + reg = <2>; + + adx5_out2: endpoint { + remote-endpoint = <&xbar_adx5_out2>; + }; + }; + + adx5_out3_port: port@3 { + reg = <3>; + + adx5_out3: endpoint { + remote-endpoint = <&xbar_adx5_out3>; + }; + }; + + adx5_out4_port: port@4 { + reg = <4>; + + adx5_out4: endpoint { + remote-endpoint = <&xbar_adx5_out4>; + }; + }; + }; + }; + + tegra_adx6: adx@95e0000 { + compatible = "nvidia,tegra264-adx"; + reg = <0x0 0x95e0000 0x0 0x10000>; + sound-name-prefix = "ADX6"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adx6_in: endpoint { + remote-endpoint = <&xbar_adx6_in>; + }; + }; + + adx6_out1_port: port@1 { + reg = <1>; + + adx6_out1: endpoint { + remote-endpoint = <&xbar_adx6_out1>; + }; + }; + + adx6_out2_port: port@2 { + reg = <2>; + + adx6_out2: endpoint { + remote-endpoint = <&xbar_adx6_out2>; + }; + }; + + adx6_out3_port: port@3 { + reg = <3>; + + adx6_out3: endpoint { + remote-endpoint = <&xbar_adx6_out3>; + }; + }; + + adx6_out4_port: port@4 { + reg = <4>; + + adx6_out4: endpoint { + remote-endpoint = <&xbar_adx6_out4>; + }; + }; + }; + }; + + tegra_admaif: admaif@9610000 { + compatible = "nvidia,tegra264-admaif"; + reg = <0x0 0x9610000 0x0 0x10000>; + dmas = <&adma 1>, <&adma 1>, + <&adma 2>, <&adma 2>, + <&adma 3>, <&adma 3>, + <&adma 4>, <&adma 4>, + <&adma 5>, <&adma 5>, + <&adma 6>, <&adma 6>, + <&adma 7>, <&adma 7>, + <&adma 8>, <&adma 8>, + <&adma 9>, <&adma 9>, + <&adma 10>, <&adma 10>, + <&adma 11>, <&adma 11>, + <&adma 12>, <&adma 12>, + <&adma 13>, <&adma 13>, + <&adma 14>, <&adma 14>, + <&adma 15>, <&adma 15>, + <&adma 16>, <&adma 16>, + <&adma 17>, <&adma 17>, + <&adma 18>, <&adma 18>, + <&adma 19>, <&adma 19>, + <&adma 20>, <&adma 20>, + <&adma 21>, <&adma 21>, + <&adma 22>, <&adma 22>, + <&adma 23>, <&adma 23>, + <&adma 24>, <&adma 24>, + <&adma 25>, <&adma 25>, + <&adma 26>, <&adma 26>, + <&adma 27>, <&adma 27>, + <&adma 28>, <&adma 28>, + <&adma 29>, <&adma 29>, + <&adma 30>, <&adma 30>, + <&adma 31>, <&adma 31>, + <&adma 32>, <&adma 32>; + dma-names = "rx1", "tx1", + "rx2", "tx2", + "rx3", "tx3", + "rx4", "tx4", + "rx5", "tx5", + "rx6", "tx6", + "rx7", "tx7", + "rx8", "tx8", + "rx9", "tx9", + "rx10", "tx10", + "rx11", "tx11", + "rx12", "tx12", + "rx13", "tx13", + "rx14", "tx14", + "rx15", "tx15", + "rx16", "tx16", + "rx17", "tx17", + "rx18", "tx18", + "rx19", "tx19", + "rx20", "tx20", + "rx21", "tx21", + "rx22", "tx22", + "rx23", "tx23", + "rx24", "tx24", + "rx25", "tx25", + "rx26", "tx26", + "rx27", "tx27", + "rx28", "tx28", + "rx29", "tx29", + "rx30", "tx30", + "rx31", "tx31", + "rx32", "tx32"; + + interconnects = + <&mc TEGRA264_MEMORY_CLIENT_APEDMAR &emc>, + <&mc TEGRA264_MEMORY_CLIENT_APEDMAW &emc>; + interconnect-names = "dma-mem", "write"; + + iommus = <&smmu1 TEGRA264_SID_APE>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + admaif0_port: port@0 { + reg = <0x0>; + + admaif0: endpoint { + remote-endpoint = <&xbar_admaif0>; + }; + }; + + admaif1_port: port@1 { + reg = <0x1>; + + admaif1: endpoint { + remote-endpoint = <&xbar_admaif1>; + }; + }; + + admaif2_port: port@2 { + reg = <0x2>; + + admaif2: endpoint { + remote-endpoint = <&xbar_admaif2>; + }; + }; + + admaif3_port: port@3 { + reg = <0x3>; + + admaif3: endpoint { + remote-endpoint = <&xbar_admaif3>; + }; + }; + + admaif4_port: port@4 { + reg = <0x4>; + + admaif4: endpoint { + remote-endpoint = <&xbar_admaif4>; + }; + }; + + admaif5_port: port@5 { + reg = <0x5>; + + admaif5: endpoint { + remote-endpoint = <&xbar_admaif5>; + }; + }; + + admaif6_port: port@6 { + reg = <0x6>; + + admaif6: endpoint { + remote-endpoint = <&xbar_admaif6>; + }; + }; + + admaif7_port: port@7 { + reg = <0x7>; + + admaif7: endpoint { + remote-endpoint = <&xbar_admaif7>; + }; + }; + + admaif8_port: port@8 { + reg = <0x8>; + + admaif8: endpoint { + remote-endpoint = <&xbar_admaif8>; + }; + }; + + admaif9_port: port@9 { + reg = <0x9>; + + admaif9: endpoint { + remote-endpoint = <&xbar_admaif9>; + }; + }; + + admaif10_port: port@a { + reg = <0xa>; + + admaif10: endpoint { + remote-endpoint = <&xbar_admaif10>; + }; + }; + + admaif11_port: port@b { + reg = <0xb>; + + admaif11: endpoint { + remote-endpoint = <&xbar_admaif11>; + }; + }; + + admaif12_port: port@c { + reg = <0xc>; + + admaif12: endpoint { + remote-endpoint = <&xbar_admaif12>; + }; + }; + + admaif13_port: port@d { + reg = <0xd>; + + admaif13: endpoint { + remote-endpoint = <&xbar_admaif13>; + }; + }; + + admaif14_port: port@e { + reg = <0xe>; + + admaif14: endpoint { + remote-endpoint = <&xbar_admaif14>; + }; + }; + + admaif15_port: port@f { + reg = <0xf>; + + admaif15: endpoint { + remote-endpoint = <&xbar_admaif15>; + }; + }; + + admaif16_port: port@10 { + reg = <0x10>; + + admaif16: endpoint { + remote-endpoint = <&xbar_admaif16>; + }; + }; + + admaif17_port: port@11 { + reg = <0x11>; + + admaif17: endpoint { + remote-endpoint = <&xbar_admaif17>; + }; + }; + + admaif18_port: port@12 { + reg = <0x12>; + + admaif18: endpoint { + remote-endpoint = <&xbar_admaif18>; + }; + }; + + admaif19_port: port@13 { + reg = <0x13>; + + admaif19: endpoint { + remote-endpoint = <&xbar_admaif19>; + }; + }; + + admaif20_port: port@14 { + reg = <0x14>; + + admaif20: endpoint { + remote-endpoint = <&xbar_admaif20>; + }; + }; + + admaif21_port: port@15 { + reg = <0x15>; + + admaif21: endpoint { + remote-endpoint = <&xbar_admaif21>; + }; + }; + + admaif22_port: port@16 { + reg = <0x16>; + + admaif22: endpoint { + remote-endpoint = <&xbar_admaif22>; + }; + }; + + admaif23_port: port@17 { + reg = <0x17>; + + admaif23: endpoint { + remote-endpoint = <&xbar_admaif23>; + }; + }; + + admaif24_port: port@18 { + reg = <0x18>; + + admaif24: endpoint { + remote-endpoint = <&xbar_admaif24>; + }; + }; + + admaif25_port: port@19 { + reg = <0x19>; + + admaif25: endpoint { + remote-endpoint = <&xbar_admaif25>; + }; + }; + + admaif26_port: port@1a { + reg = <0x1a>; + + admaif26: endpoint { + remote-endpoint = <&xbar_admaif26>; + }; + }; + + admaif27_port: port@1b { + reg = <0x1b>; + + admaif27: endpoint { + remote-endpoint = <&xbar_admaif27>; + }; + }; + + admaif28_port: port@1c { + reg = <0x1c>; + + admaif28: endpoint { + remote-endpoint = <&xbar_admaif28>; + }; + }; + + admaif29_port: port@1d { + reg = <0x1d>; + + admaif29: endpoint { + remote-endpoint = <&xbar_admaif29>; + }; + }; + + admaif30_port: port@1e { + reg = <0x1e>; + + admaif30: endpoint { + remote-endpoint = <&xbar_admaif30>; + }; + }; + + admaif31_port: port@1f { + reg = <0x1f>; + + admaif31: endpoint { + remote-endpoint = <&xbar_admaif31>; + }; + }; + }; + }; + + tegra_sfc1: sfc@9700000 { + compatible = "nvidia,tegra264-sfc", + "nvidia,tegra210-sfc"; + reg = <0x0 0x9700000 0x0 0x10000>; + sound-name-prefix = "SFC1"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc1_cif_in: endpoint { + remote-endpoint = <&xbar_sfc1_in>; + }; + }; + + sfc1_out_port: port@1 { + reg = <1>; + + sfc1_cif_out: endpoint { + remote-endpoint = <&xbar_sfc1_out>; + }; + }; + }; + }; + + tegra_sfc2: sfc@9710000 { + compatible = "nvidia,tegra264-sfc", + "nvidia,tegra210-sfc"; + reg = <0x0 0x9710000 0x0 0x10000>; + sound-name-prefix = "SFC2"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc2_cif_in: endpoint { + remote-endpoint = <&xbar_sfc2_in>; + }; + }; + + sfc2_out_port: port@1 { + reg = <1>; + + sfc2_cif_out: endpoint { + remote-endpoint = <&xbar_sfc2_out>; + }; + }; + }; + }; + + tegra_sfc3: sfc@9720000 { + compatible = "nvidia,tegra264-sfc", + "nvidia,tegra210-sfc"; + reg = <0x0 0x9720000 0x0 0x10000>; + sound-name-prefix = "SFC3"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc3_cif_in: endpoint { + remote-endpoint = <&xbar_sfc3_in>; + }; + }; + + sfc3_out_port: port@1 { + reg = <1>; + + sfc3_cif_out: endpoint { + remote-endpoint = <&xbar_sfc3_out>; + }; + }; + }; + }; + + tegra_sfc4: sfc@9730000 { + compatible = "nvidia,tegra264-sfc", + "nvidia,tegra210-sfc"; + reg = <0x0 0x9730000 0x0 0x10000>; + sound-name-prefix = "SFC4"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sfc4_cif_in: endpoint { + remote-endpoint = <&xbar_sfc4_in>; + }; + }; + + sfc4_out_port: port@1 { + reg = <1>; + + sfc4_cif_out: endpoint { + remote-endpoint = <&xbar_sfc4_out>; + }; + }; + }; + }; + + tegra_ope1: processing-engine@9780000 { + compatible = "nvidia,tegra264-ope", + "nvidia,tegra210-ope"; + reg = <0x0 0x9780000 0x0 0x10000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x9780000 0x0 0x9780000 0x0 0x30000>; + sound-name-prefix = "OPE1"; + + equalizer@9790000 { + compatible = "nvidia,tegra264-peq", + "nvidia,tegra210-peq"; + reg = <0x0 0x9790000 0x0 0x10000>; + }; + + dynamic-range-compressor@97a0000 { + compatible = "nvidia,tegra264-mbdrc", + "nvidia,tegra210-mbdrc"; + reg = <0x0 0x97a0000 0x0 0x10000>; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + ope1_cif_in_ep: endpoint { + remote-endpoint = + <&xbar_ope1_in_ep>; + }; + }; + + ope1_out_port: port@1 { + reg = <0x1>; + + ope1_cif_out_ep: endpoint { + remote-endpoint = + <&xbar_ope1_out_ep>; + }; + }; + }; + }; + + tegra_mvc1: mvc@9800000 { + compatible = "nvidia,tegra264-mvc", + "nvidia,tegra210-mvc"; + reg = <0x0 0x9800000 0x0 0x10000>; + sound-name-prefix = "MVC1"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc1_cif_in: endpoint { + remote-endpoint = <&xbar_mvc1_in>; + }; + }; + + mvc1_out_port: port@1 { + reg = <1>; + + mvc1_cif_out: endpoint { + remote-endpoint = <&xbar_mvc1_out>; + }; + }; + }; + }; + + tegra_mvc2: mvc@9810000 { + compatible = "nvidia,tegra264-mvc", + "nvidia,tegra210-mvc"; + reg = <0x0 0x9810000 0x0 0x10000>; + sound-name-prefix = "MVC2"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mvc2_cif_in: endpoint { + remote-endpoint = <&xbar_mvc2_in>; + }; + }; + + mvc2_out_port: port@1 { + reg = <1>; + + mvc2_cif_out: endpoint { + remote-endpoint = <&xbar_mvc2_out>; + }; + }; + }; + }; + + tegra_amixer: amixer@9820000 { + compatible = "nvidia,tegra264-amixer", + "nvidia,tegra210-amixer"; + reg = <0x0 0x9820000 0x0 0x10000>; + sound-name-prefix = "MIXER1"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + mix_in1: endpoint { + remote-endpoint = <&xbar_mix_in1>; + }; + }; + + port@1 { + reg = <0x1>; + + mix_in2: endpoint { + remote-endpoint = <&xbar_mix_in2>; + }; + }; + + port@2 { + reg = <0x2>; + + mix_in3: endpoint { + remote-endpoint = <&xbar_mix_in3>; + }; + }; + + port@3 { + reg = <0x3>; + + mix_in4: endpoint { + remote-endpoint = <&xbar_mix_in4>; + }; + }; + + port@4 { + reg = <0x4>; + + mix_in5: endpoint { + remote-endpoint = <&xbar_mix_in5>; + }; + }; + + port@5 { + reg = <0x5>; + + mix_in6: endpoint { + remote-endpoint = <&xbar_mix_in6>; + }; + }; + + port@6 { + reg = <0x6>; + + mix_in7: endpoint { + remote-endpoint = <&xbar_mix_in7>; + }; + }; + + port@7 { + reg = <0x7>; + + mix_in8: endpoint { + remote-endpoint = <&xbar_mix_in8>; + }; + }; + + port@8 { + reg = <0x8>; + + mix_in9: endpoint { + remote-endpoint = <&xbar_mix_in9>; + }; + }; + + port@9 { + reg = <0x9>; + + mix_in10: endpoint { + remote-endpoint = <&xbar_mix_in10>; + }; + }; + + mix_out1_port: port@a { + reg = <0xa>; + + mix_out1: endpoint { + remote-endpoint = <&xbar_mix_out1>; + }; + }; + + mix_out2_port: port@b { + reg = <0xb>; + + mix_out2: endpoint { + remote-endpoint = <&xbar_mix_out2>; + }; + }; + + mix_out3_port: port@c { + reg = <0xc>; + + mix_out3: endpoint { + remote-endpoint = <&xbar_mix_out3>; + }; + }; + + mix_out4_port: port@d { + reg = <0xd>; + + mix_out4: endpoint { + remote-endpoint = <&xbar_mix_out4>; + }; + }; + + mix_out5_port: port@e { + reg = <0xe>; + + mix_out5: endpoint { + remote-endpoint = <&xbar_mix_out5>; + }; + }; + }; + }; + + tegra_asrc: asrc@9850000 { + compatible = "nvidia,tegra264-asrc"; + reg = <0x0 0x9850000 0x0 0x10000>; + sound-name-prefix = "ASRC1"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + asrc_in1_ep: endpoint { + remote-endpoint = + <&xbar_asrc_in1_ep>; + }; + }; + + port@1 { + reg = <0x1>; + + asrc_in2_ep: endpoint { + remote-endpoint = + <&xbar_asrc_in2_ep>; + }; + }; + + port@2 { + reg = <0x2>; + + asrc_in3_ep: endpoint { + remote-endpoint = + <&xbar_asrc_in3_ep>; + }; + }; + + port@3 { + reg = <0x3>; + + asrc_in4_ep: endpoint { + remote-endpoint = + <&xbar_asrc_in4_ep>; + }; + }; + + port@4 { + reg = <0x4>; + + asrc_in5_ep: endpoint { + remote-endpoint = + <&xbar_asrc_in5_ep>; + }; + }; + + port@5 { + reg = <0x5>; + + asrc_in6_ep: endpoint { + remote-endpoint = + <&xbar_asrc_in6_ep>; + }; + }; + + port@6 { + reg = <0x6>; + + asrc_in7_ep: endpoint { + remote-endpoint = + <&xbar_asrc_in7_ep>; + }; + }; + + asrc_out1_port: port@7 { + reg = <0x7>; + + asrc_out1_ep: endpoint { + remote-endpoint = + <&xbar_asrc_out1_ep>; + }; + }; + + asrc_out2_port: port@8 { + reg = <0x8>; + + asrc_out2_ep: endpoint { + remote-endpoint = + <&xbar_asrc_out2_ep>; + }; + }; + + asrc_out3_port: port@9 { + reg = <0x9>; + + asrc_out3_ep: endpoint { + remote-endpoint = + <&xbar_asrc_out3_ep>; + }; + }; + + asrc_out4_port: port@a { + reg = <0xa>; + + asrc_out4_ep: endpoint { + remote-endpoint = + <&xbar_asrc_out4_ep>; + }; + }; + + asrc_out5_port: port@b { + reg = <0xb>; + + asrc_out5_ep: endpoint { + remote-endpoint = + <&xbar_asrc_out5_ep>; + }; + }; + + asrc_out6_port: port@c { + reg = <0xc>; + + asrc_out6_ep: endpoint { + remote-endpoint = + <&xbar_asrc_out6_ep>; + }; + }; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0x0>; + + xbar_admaif0: endpoint { + remote-endpoint = <&admaif0>; + }; + }; + + port@1 { + reg = <0x1>; + + xbar_admaif1: endpoint { + remote-endpoint = <&admaif1>; + }; + }; + + port@2 { + reg = <0x2>; + + xbar_admaif2: endpoint { + remote-endpoint = <&admaif2>; + }; + }; + + port@3 { + reg = <0x3>; + + xbar_admaif3: endpoint { + remote-endpoint = <&admaif3>; + }; + }; + + port@4 { + reg = <0x4>; + + xbar_admaif4: endpoint { + remote-endpoint = <&admaif4>; + }; + }; + + port@5 { + reg = <0x5>; + + xbar_admaif5: endpoint { + remote-endpoint = <&admaif5>; + }; + }; + + port@6 { + reg = <0x6>; + + xbar_admaif6: endpoint { + remote-endpoint = <&admaif6>; + }; + }; + + port@7 { + reg = <0x7>; + + xbar_admaif7: endpoint { + remote-endpoint = <&admaif7>; + }; + }; + + port@8 { + reg = <0x8>; + + xbar_admaif8: endpoint { + remote-endpoint = <&admaif8>; + }; + }; + + port@9 { + reg = <0x9>; + + xbar_admaif9: endpoint { + remote-endpoint = <&admaif9>; + }; + }; + + port@a { + reg = <0xa>; + + xbar_admaif10: endpoint { + remote-endpoint = <&admaif10>; + }; + }; + + port@b { + reg = <0xb>; + + xbar_admaif11: endpoint { + remote-endpoint = <&admaif11>; + }; + }; + + port@c { + reg = <0xc>; + + xbar_admaif12: endpoint { + remote-endpoint = <&admaif12>; + }; + }; + + port@d { + reg = <0xd>; + + xbar_admaif13: endpoint { + remote-endpoint = <&admaif13>; + }; + }; + + port@e { + reg = <0xe>; + + xbar_admaif14: endpoint { + remote-endpoint = <&admaif14>; + }; + }; + + port@f { + reg = <0xf>; + + xbar_admaif15: endpoint { + remote-endpoint = <&admaif15>; + }; + }; + + port@10 { + reg = <0x10>; + + xbar_admaif16: endpoint { + remote-endpoint = <&admaif16>; + }; + }; + + port@11 { + reg = <0x11>; + + xbar_admaif17: endpoint { + remote-endpoint = <&admaif17>; + }; + }; + + port@12 { + reg = <0x12>; + + xbar_admaif18: endpoint { + remote-endpoint = <&admaif18>; + }; + }; + + port@13 { + reg = <0x13>; + + xbar_admaif19: endpoint { + remote-endpoint = <&admaif19>; + }; + }; + + port@14 { + reg = <0x14>; + + xbar_admaif20: endpoint { + remote-endpoint = <&admaif20>; + }; + }; + + port@15 { + reg = <0x15>; + + xbar_admaif21: endpoint { + remote-endpoint = <&admaif21>; + }; + }; + + port@16 { + reg = <0x16>; + + xbar_admaif22: endpoint { + remote-endpoint = <&admaif22>; + }; + }; + + port@17 { + reg = <0x17>; + + xbar_admaif23: endpoint { + remote-endpoint = <&admaif23>; + }; + }; + + port@18 { + reg = <0x18>; + + xbar_admaif24: endpoint { + remote-endpoint = <&admaif24>; + }; + }; + + port@19 { + reg = <0x19>; + + xbar_admaif25: endpoint { + remote-endpoint = <&admaif25>; + }; + }; + + port@1a { + reg = <0x1a>; + + xbar_admaif26: endpoint { + remote-endpoint = <&admaif26>; + }; + }; + + port@1b { + reg = <0x1b>; + + xbar_admaif27: endpoint { + remote-endpoint = <&admaif27>; + }; + }; + + port@1c { + reg = <0x1c>; + + xbar_admaif28: endpoint { + remote-endpoint = <&admaif28>; + }; + }; + + port@1d { + reg = <0x1d>; + + xbar_admaif29: endpoint { + remote-endpoint = <&admaif29>; + }; + }; + + port@1e { + reg = <0x1e>; + + xbar_admaif30: endpoint { + remote-endpoint = <&admaif30>; + }; + }; + + port@1f { + reg = <0x1f>; + + xbar_admaif31: endpoint { + remote-endpoint = <&admaif31>; + }; + }; + + xbar_i2s1_port: port@20 { + reg = <0x20>; + + xbar_i2s1: endpoint { + remote-endpoint = <&i2s1_cif>; + }; + }; + + xbar_i2s2_port: port@21 { + reg = <0x21>; + + xbar_i2s2: endpoint { + remote-endpoint = <&i2s2_cif>; + }; + }; + + xbar_i2s3_port: port@22 { + reg = <0x22>; + + xbar_i2s3: endpoint { + remote-endpoint = <&i2s3_cif>; + }; + }; + + xbar_i2s4_port: port@23 { + reg = <0x23>; + + xbar_i2s4: endpoint { + remote-endpoint = <&i2s4_cif>; + }; + }; + + xbar_i2s5_port: port@24 { + reg = <0x24>; + + xbar_i2s5: endpoint { + remote-endpoint = <&i2s5_cif>; + }; + }; + + xbar_i2s6_port: port@25 { + reg = <0x25>; + + xbar_i2s6: endpoint { + remote-endpoint = <&i2s6_cif>; + }; + }; + + xbar_i2s7_port: port@26 { + reg = <0x26>; + + xbar_i2s7: endpoint { + remote-endpoint = <&i2s7_cif>; + }; + }; + + xbar_i2s8_port: port@27 { + reg = <0x27>; + + xbar_i2s8: endpoint { + remote-endpoint = <&i2s8_cif>; + }; + }; + + xbar_dmic1_port: port@28 { + reg = <0x28>; + + xbar_dmic1: endpoint { + remote-endpoint = <&dmic1_cif>; + }; + }; + + xbar_dmic2_port: port@29 { + reg = <0x29>; + + xbar_dmic2: endpoint { + remote-endpoint = <&dmic2_cif>; + }; + }; + + xbar_dspk1_port: port@2a { + reg = <0x2a>; + + xbar_dspk1: endpoint { + remote-endpoint = <&dspk1_cif>; + }; + }; + + xbar_sfc1_in_port: port@2b { + reg = <0x2b>; + + xbar_sfc1_in: endpoint { + remote-endpoint = <&sfc1_cif_in>; + }; + }; + + port@2c { + reg = <0x2c>; + + xbar_sfc1_out: endpoint { + remote-endpoint = <&sfc1_cif_out>; + }; + }; + + xbar_sfc2_in_port: port@2d { + reg = <0x2d>; + + xbar_sfc2_in: endpoint { + remote-endpoint = <&sfc2_cif_in>; + }; + }; + + port@2e { + reg = <0x2e>; + + xbar_sfc2_out: endpoint { + remote-endpoint = <&sfc2_cif_out>; + }; + }; + + xbar_sfc3_in_port: port@2f { + reg = <0x2f>; + + xbar_sfc3_in: endpoint { + remote-endpoint = <&sfc3_cif_in>; + }; + }; + + port@30 { + reg = <0x30>; + + xbar_sfc3_out: endpoint { + remote-endpoint = <&sfc3_cif_out>; + }; + }; + + xbar_sfc4_in_port: port@31 { + reg = <0x31>; + + xbar_sfc4_in: endpoint { + remote-endpoint = <&sfc4_cif_in>; + }; + }; + + port@32 { + reg = <0x32>; + + xbar_sfc4_out: endpoint { + remote-endpoint = <&sfc4_cif_out>; + }; + }; + + xbar_mvc1_in_port: port@33 { + reg = <0x33>; + + xbar_mvc1_in: endpoint { + remote-endpoint = <&mvc1_cif_in>; + }; + }; + + port@34 { + reg = <0x34>; + + xbar_mvc1_out: endpoint { + remote-endpoint = <&mvc1_cif_out>; + }; + }; + + xbar_mvc2_in_port: port@35 { + reg = <0x35>; + + xbar_mvc2_in: endpoint { + remote-endpoint = <&mvc2_cif_in>; + }; + }; + + port@36 { + reg = <0x36>; + + xbar_mvc2_out: endpoint { + remote-endpoint = <&mvc2_cif_out>; + }; + }; + + xbar_amx1_in1_port: port@37 { + reg = <0x37>; + + xbar_amx1_in1: endpoint { + remote-endpoint = <&amx1_in1>; + }; + }; + + xbar_amx1_in2_port: port@38 { + reg = <0x38>; + + xbar_amx1_in2: endpoint { + remote-endpoint = <&amx1_in2>; + }; + }; + + xbar_amx1_in3_port: port@39 { + reg = <0x39>; + + xbar_amx1_in3: endpoint { + remote-endpoint = <&amx1_in3>; + }; + }; + + xbar_amx1_in4_port: port@3a { + reg = <0x3a>; + + xbar_amx1_in4: endpoint { + remote-endpoint = <&amx1_in4>; + }; + }; + + port@3b { + reg = <0x3b>; + + xbar_amx1_out: endpoint { + remote-endpoint = <&amx1_out>; + }; + }; + + xbar_amx2_in1_port: port@3c { + reg = <0x3c>; + + xbar_amx2_in1: endpoint { + remote-endpoint = <&amx2_in1>; + }; + }; + + xbar_amx2_in2_port: port@3d { + reg = <0x3d>; + + xbar_amx2_in2: endpoint { + remote-endpoint = <&amx2_in2>; + }; + }; + + xbar_amx2_in3_port: port@3e { + reg = <0x3e>; + + xbar_amx2_in3: endpoint { + remote-endpoint = <&amx2_in3>; + }; + }; + + xbar_amx2_in4_port: port@3f { + reg = <0x3f>; + + xbar_amx2_in4: endpoint { + remote-endpoint = <&amx2_in4>; + }; + }; + + port@40 { + reg = <0x40>; + + xbar_amx2_out: endpoint { + remote-endpoint = <&amx2_out>; + }; + }; + + xbar_amx3_in1_port: port@41 { + reg = <0x41>; + + xbar_amx3_in1: endpoint { + remote-endpoint = <&amx3_in1>; + }; + }; + + xbar_amx3_in2_port: port@42 { + reg = <0x42>; + + xbar_amx3_in2: endpoint { + remote-endpoint = <&amx3_in2>; + }; + }; + + xbar_amx3_in3_port: port@43 { + reg = <0x43>; + + xbar_amx3_in3: endpoint { + remote-endpoint = <&amx3_in3>; + }; + }; + + xbar_amx3_in4_port: port@44 { + reg = <0x44>; + + xbar_amx3_in4: endpoint { + remote-endpoint = <&amx3_in4>; + }; + }; + + port@45 { + reg = <0x45>; + + xbar_amx3_out: endpoint { + remote-endpoint = <&amx3_out>; + }; + }; + + xbar_amx4_in1_port: port@46 { + reg = <0x46>; + + xbar_amx4_in1: endpoint { + remote-endpoint = <&amx4_in1>; + }; + }; + + xbar_amx4_in2_port: port@47 { + reg = <0x47>; + + xbar_amx4_in2: endpoint { + remote-endpoint = <&amx4_in2>; + }; + }; + + xbar_amx4_in3_port: port@48 { + reg = <0x48>; + + xbar_amx4_in3: endpoint { + remote-endpoint = <&amx4_in3>; + }; + }; + + xbar_amx4_in4_port: port@49 { + reg = <0x49>; + + xbar_amx4_in4: endpoint { + remote-endpoint = <&amx4_in4>; + }; + }; + + port@4a { + reg = <0x4a>; + + xbar_amx4_out: endpoint { + remote-endpoint = <&amx4_out>; + }; + }; + + xbar_amx5_in1_port: port@4b { + reg = <0x4b>; + + xbar_amx5_in1: endpoint { + remote-endpoint = <&amx5_in1>; + }; + }; + + xbar_amx5_in2_port: port@4c { + reg = <0x4c>; + + xbar_amx5_in2: endpoint { + remote-endpoint = <&amx5_in2>; + }; + }; + + xbar_amx5_in3_port: port@4d { + reg = <0x4d>; + + xbar_amx5_in3: endpoint { + remote-endpoint = <&amx5_in3>; + }; + }; + + xbar_amx5_in4_port: port@4e { + reg = <0x4e>; + + xbar_amx5_in4: endpoint { + remote-endpoint = <&amx5_in4>; + }; + }; + + port@4f { + reg = <0x4f>; + + xbar_amx5_out: endpoint { + remote-endpoint = <&amx5_out>; + }; + }; + + xbar_amx6_in1_port: port@50 { + reg = <0x50>; + + xbar_amx6_in1: endpoint { + remote-endpoint = <&amx6_in1>; + }; + }; + + xbar_amx6_in2_port: port@51 { + reg = <0x51>; + + xbar_amx6_in2: endpoint { + remote-endpoint = <&amx6_in2>; + }; + }; + + xbar_amx6_in3_port: port@52 { + reg = <0x52>; + + xbar_amx6_in3: endpoint { + remote-endpoint = <&amx6_in3>; + }; + }; + + xbar_amx6_in4_port: port@53 { + reg = <0x53>; + + xbar_amx6_in4: endpoint { + remote-endpoint = <&amx6_in4>; + }; + }; + + port@54 { + reg = <0x54>; + + xbar_amx6_out: endpoint { + remote-endpoint = <&amx6_out>; + }; + }; + + xbar_adx1_in_port: port@55 { + reg = <0x55>; + + xbar_adx1_in: endpoint { + remote-endpoint = <&adx1_in>; + }; + }; + + port@56 { + reg = <0x56>; + + xbar_adx1_out1: endpoint { + remote-endpoint = <&adx1_out1>; + }; + }; + + port@57 { + reg = <0x57>; + + xbar_adx1_out2: endpoint { + remote-endpoint = <&adx1_out2>; + }; + }; + + port@58 { + reg = <0x58>; + + xbar_adx1_out3: endpoint { + remote-endpoint = <&adx1_out3>; + }; + }; + + port@59 { + reg = <0x59>; + + xbar_adx1_out4: endpoint { + remote-endpoint = <&adx1_out4>; + }; + }; + + xbar_adx2_in_port: port@5a { + reg = <0x5a>; + + xbar_adx2_in: endpoint { + remote-endpoint = <&adx2_in>; + }; + }; + + port@5b { + reg = <0x5b>; + + xbar_adx2_out1: endpoint { + remote-endpoint = <&adx2_out1>; + }; + }; + + port@5c { + reg = <0x5c>; + + xbar_adx2_out2: endpoint { + remote-endpoint = <&adx2_out2>; + }; + }; + + port@5d { + reg = <0x5d>; + + xbar_adx2_out3: endpoint { + remote-endpoint = <&adx2_out3>; + }; + }; + + port@5e { + reg = <0x5e>; + + xbar_adx2_out4: endpoint { + remote-endpoint = <&adx2_out4>; + }; + }; + + xbar_adx3_in_port: port@5f { + reg = <0x5f>; + + xbar_adx3_in: endpoint { + remote-endpoint = <&adx3_in>; + }; + }; + + port@60 { + reg = <0x60>; + + xbar_adx3_out1: endpoint { + remote-endpoint = <&adx3_out1>; + }; + }; + + port@61 { + reg = <0x61>; + + xbar_adx3_out2: endpoint { + remote-endpoint = <&adx3_out2>; + }; + }; + + port@62 { + reg = <0x62>; + + xbar_adx3_out3: endpoint { + remote-endpoint = <&adx3_out3>; + }; + }; + + port@63 { + reg = <0x63>; + + xbar_adx3_out4: endpoint { + remote-endpoint = <&adx3_out4>; + }; + }; + + xbar_adx4_in_port: port@64 { + reg = <0x64>; + + xbar_adx4_in: endpoint { + remote-endpoint = <&adx4_in>; + }; + }; + + port@65 { + reg = <0x65>; + + xbar_adx4_out1: endpoint { + remote-endpoint = <&adx4_out1>; + }; + }; + + port@66 { + reg = <0x66>; + + xbar_adx4_out2: endpoint { + remote-endpoint = <&adx4_out2>; + }; + }; + + port@67 { + reg = <0x67>; + + xbar_adx4_out3: endpoint { + remote-endpoint = <&adx4_out3>; + }; + }; + + port@68 { + reg = <0x68>; + + xbar_adx4_out4: endpoint { + remote-endpoint = <&adx4_out4>; + }; + }; + + xbar_adx5_in_port: port@69 { + reg = <0x69>; + + xbar_adx5_in: endpoint { + remote-endpoint = <&adx5_in>; + }; + }; + + port@6a { + reg = <0x6a>; + + xbar_adx5_out1: endpoint { + remote-endpoint = <&adx5_out1>; + }; + }; + + port@6b { + reg = <0x6b>; + + xbar_adx5_out2: endpoint { + remote-endpoint = <&adx5_out2>; + }; + }; + + port@6c { + reg = <0x6c>; + + xbar_adx5_out3: endpoint { + remote-endpoint = <&adx5_out3>; + }; + }; + + port@6d { + reg = <0x6d>; + + xbar_adx5_out4: endpoint { + remote-endpoint = <&adx5_out4>; + }; + }; + + xbar_adx6_in_port: port@6e { + reg = <0x6e>; + + xbar_adx6_in: endpoint { + remote-endpoint = <&adx6_in>; + }; + }; + + port@6f { + reg = <0x6f>; + + xbar_adx6_out1: endpoint { + remote-endpoint = <&adx6_out1>; + }; + }; + + port@70 { + reg = <0x70>; + + xbar_adx6_out2: endpoint { + remote-endpoint = <&adx6_out2>; + }; + }; + + port@71 { + reg = <0x71>; + + xbar_adx6_out3: endpoint { + remote-endpoint = <&adx6_out3>; + }; + }; + + port@72 { + reg = <0x72>; + + xbar_adx6_out4: endpoint { + remote-endpoint = <&adx6_out4>; + }; + }; + + xbar_mix_in1_port: port@73 { + reg = <0x73>; + + xbar_mix_in1: endpoint { + remote-endpoint = <&mix_in1>; + }; + }; + + xbar_mix_in2_port: port@74 { + reg = <0x74>; + + xbar_mix_in2: endpoint { + remote-endpoint = <&mix_in2>; + }; + }; + + xbar_mix_in3_port: port@75 { + reg = <0x75>; + + xbar_mix_in3: endpoint { + remote-endpoint = <&mix_in3>; + }; + }; + + xbar_mix_in4_port: port@76 { + reg = <0x76>; + + xbar_mix_in4: endpoint { + remote-endpoint = <&mix_in4>; + }; + }; + + xbar_mix_in5_port: port@77 { + reg = <0x77>; + + xbar_mix_in5: endpoint { + remote-endpoint = <&mix_in5>; + }; + }; + + xbar_mix_in6_port: port@78 { + reg = <0x78>; + + xbar_mix_in6: endpoint { + remote-endpoint = <&mix_in6>; + }; + }; + + xbar_mix_in7_port: port@79 { + reg = <0x79>; + + xbar_mix_in7: endpoint { + remote-endpoint = <&mix_in7>; + }; + }; + + xbar_mix_in8_port: port@7a { + reg = <0x7a>; + + xbar_mix_in8: endpoint { + remote-endpoint = <&mix_in8>; + }; + }; + + xbar_mix_in9_port: port@7b { + reg = <0x7b>; + + xbar_mix_in9: endpoint { + remote-endpoint = <&mix_in9>; + }; + }; + + xbar_mix_in10_port: port@7c { + reg = <0x7c>; + + xbar_mix_in10: endpoint { + remote-endpoint = <&mix_in10>; + }; + }; + + port@7d { + reg = <0x7d>; + + xbar_mix_out1: endpoint { + remote-endpoint = <&mix_out1>; + }; + }; + + port@7e { + reg = <0x7e>; + + xbar_mix_out2: endpoint { + remote-endpoint = <&mix_out2>; + }; + }; + + port@7f { + reg = <0x7f>; + + xbar_mix_out3: endpoint { + remote-endpoint = <&mix_out3>; + }; + }; + + port@80 { + reg = <0x80>; + + xbar_mix_out4: endpoint { + remote-endpoint = <&mix_out4>; + }; + }; + + port@81 { + reg = <0x81>; + + xbar_mix_out5: endpoint { + remote-endpoint = <&mix_out5>; + }; + }; + + xbar_asrc_in1_port: port@82 { + reg = <0x82>; + + xbar_asrc_in1_ep: endpoint { + remote-endpoint = <&asrc_in1_ep>; + }; + }; + + port@83 { + reg = <0x83>; + + xbar_asrc_out1_ep: endpoint { + remote-endpoint = <&asrc_out1_ep>; + }; + }; + + xbar_asrc_in2_port: port@84 { + reg = <0x84>; + + xbar_asrc_in2_ep: endpoint { + remote-endpoint = <&asrc_in2_ep>; + }; + }; + + port@85 { + reg = <0x85>; + + xbar_asrc_out2_ep: endpoint { + remote-endpoint = <&asrc_out2_ep>; + }; + }; + + xbar_asrc_in3_port: port@86 { + reg = <0x86>; + + xbar_asrc_in3_ep: endpoint { + remote-endpoint = <&asrc_in3_ep>; + }; + }; + + port@87 { + reg = <0x87>; + + xbar_asrc_out3_ep: endpoint { + remote-endpoint = <&asrc_out3_ep>; + }; + }; + + xbar_asrc_in4_port: port@88 { + reg = <0x88>; + + xbar_asrc_in4_ep: endpoint { + remote-endpoint = <&asrc_in4_ep>; + }; + }; + + port@89 { + reg = <0x89>; + + xbar_asrc_out4_ep: endpoint { + remote-endpoint = <&asrc_out4_ep>; + }; + }; + + xbar_asrc_in5_port: port@8a { + reg = <0x8a>; + + xbar_asrc_in5_ep: endpoint { + remote-endpoint = <&asrc_in5_ep>; + }; + }; + + port@8b { + reg = <0x8b>; + + xbar_asrc_out5_ep: endpoint { + remote-endpoint = <&asrc_out5_ep>; + }; + }; + + xbar_asrc_in6_port: port@8c { + reg = <0x8c>; + + xbar_asrc_in6_ep: endpoint { + remote-endpoint = <&asrc_in6_ep>; + }; + }; + + port@8d { + reg = <0x8d>; + + xbar_asrc_out6_ep: endpoint { + remote-endpoint = <&asrc_out6_ep>; + }; + }; + + xbar_asrc_in7_port: port@8e { + reg = <0x8e>; + + xbar_asrc_in7_ep: endpoint { + remote-endpoint = <&asrc_in7_ep>; + }; + }; + + xbar_ope1_in_port: port@8f { + reg = <0x8f>; + + xbar_ope1_in_ep: endpoint { + remote-endpoint = <&ope1_cif_in_ep>; + }; + }; + + port@90 { + reg = <0x90>; + + xbar_ope1_out_ep: endpoint { + remote-endpoint = <&ope1_cif_out_ep>; + }; + }; + }; + }; + + agic_page0: interrupt-controller@9960000 { + compatible = "nvidia,tegra264-agic", + "nvidia,tegra210-agic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x9961000 0x0 0x1000>, + <0x0 0x9962000 0x0 0x1000>; + interrupts = ; + clocks = <&bpmp TEGRA264_CLK_ADSP>; + clock-names = "clk"; + status = "disabled"; + }; + + agic_page1: interrupt-controller@9970000 { + compatible = "nvidia,tegra264-agic", + "nvidia,tegra210-agic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x9971000 0x0 0x1000>, + <0x0 0x9972000 0x0 0x1000>; + interrupts = ; + clocks = <&bpmp TEGRA264_CLK_ADSP>; + clock-names = "clk"; + status = "disabled"; + }; + + agic_page2: interrupt-controller@9980000 { + compatible = "nvidia,tegra264-agic", + "nvidia,tegra210-agic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x9981000 0x0 0x1000>, + <0x0 0x9982000 0x0 0x1000>; + interrupts = ; + clocks = <&bpmp TEGRA264_CLK_ADSP>; + clock-names = "clk"; + status = "disabled"; + }; + + agic_page3: interrupt-controller@9990000 { + compatible = "nvidia,tegra264-agic", + "nvidia,tegra210-agic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x9991000 0x0 0x1000>, + <0x0 0x9992000 0x0 0x1000>; + interrupts = ; + clocks = <&bpmp TEGRA264_CLK_ADSP>; + clock-names = "clk"; + status = "disabled"; + }; + + agic_page4: interrupt-controller@99a0000 { + compatible = "nvidia,tegra264-agic", + "nvidia,tegra210-agic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x99a1000 0x0 0x1000>, + <0x0 0x99a2000 0x0 0x1000>; + interrupts = ; + clocks = <&bpmp TEGRA264_CLK_ADSP>; + clock-names = "clk"; + status = "disabled"; + }; + + agic_page5: interrupt-controller@99b0000 { + compatible = "nvidia,tegra264-agic", + "nvidia,tegra210-agic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x99b1000 0x0 0x1000>, + <0x0 0x99b2000 0x0 0x1000>; + interrupts = ; + clocks = <&bpmp TEGRA264_CLK_ADSP>; + clock-names = "clk"; + status = "disabled"; + }; + }; + gpcdma: dma-controller@8400000 { compatible = "nvidia,tegra264-gpcdma", "nvidia,tegra186-gpcdma"; reg = <0x0 0x08400000 0x0 0x210000>; @@ -542,6 +3700,22 @@ smmu3: iommu@6000000 { #iommu-cells = <1>; dma-coherent; }; + + hda@90b0000 { + compatible = "nvidia,tegra264-hda"; + reg = <0x0 0x90b0000 0x0 0x10000>; + interrupts = ; + clocks = <&bpmp TEGRA264_CLK_AZA_2XBIT>; + clock-names = "hda"; + resets = <&bpmp TEGRA264_RESET_HDA>, + <&bpmp TEGRA264_RESET_HDACODEC>; + reset-names = "hda", "hda2codec_2x"; + interconnects = <&mc TEGRA264_MEMORY_CLIENT_HDAR &emc>, + <&mc TEGRA264_MEMORY_CLIENT_HDAW &emc>; + interconnect-names = "dma-mem", "write"; + iommus = <&smmu3 TEGRA264_SID_HDA>; + status = "disabled"; + }; }; /* UPHY MMIO */ @@ -625,6 +3799,22 @@ psci { method = "smc"; }; + sound { + compatible = "nvidia,tegra264-audio-graph-card"; + + clocks = <&bpmp TEGRA264_CLK_PLLA1>, + <&bpmp TEGRA264_CLK_PLLA1_OUT1>; + clock-names = "pll_a", "plla_out0"; + assigned-clocks = <&bpmp TEGRA264_CLK_PLLA1>, + <&bpmp TEGRA264_CLK_PLLA1_OUT1>, + <&bpmp TEGRA264_CLK_AUD_MCLK>; + assigned-clock-parents = <0>, + <&bpmp TEGRA264_CLK_PLLA1>, + <&bpmp TEGRA264_CLK_PLLA1_OUT1>; + + status = "disabled"; + }; + timer { compatible = "arm,armv8-timer"; interrupts = , diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 296688f7cb2655..6f34d5ed331c4c 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -33,8 +33,10 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp454.dtb dtb-$(CONFIG_ARCH_QCOM) += lemans-evk.dtb lemans-evk-camera-csi1-imx577-dtbs := lemans-evk.dtb lemans-evk-camera-csi1-imx577.dtbo +lemans-evk-camera-dtbs := lemans-evk.dtb lemans-evk-camera.dtbo dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-camera-csi1-imx577.dtb +dtb-$(CONFIG_ARCH_QCOM) += lemans-evk-camera.dtb dtb-$(CONFIG_ARCH_QCOM) += monaco-evk.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8216-samsung-fortuna3g.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb @@ -72,6 +74,8 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8917-xiaomi-riva.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8929-wingtech-wt82918hd.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8937-xiaomi-land.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8939-asus-z00t.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8939-huawei-kiwi.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8939-longcheer-l9100.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8939-samsung-a7.dtb @@ -126,6 +130,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcm6490-shift-otter.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs615-ride.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcs6490-radxa-dragon-q6a.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb qcs6490-rb3gen2-vision-mezzanine-dtbs := qcs6490-rb3gen2.dtb qcs6490-rb3gen2-vision-mezzanine.dtbo @@ -258,6 +263,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium-ebbg.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium-tianma.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-polaris.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm850-huawei-matebook-e-2019.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb dtb-$(CONFIG_ARCH_QCOM) += sdx75-idp.dtb @@ -298,6 +304,10 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-qrd.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-samsung-r0q.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb + +sm8550-hdk-rear-camera-card-dtbs := sm8550-hdk.dtb sm8550-hdk-rear-camera-card.dtbo + +dtb-$(CONFIG_ARCH_QCOM) += sm8550-hdk-rear-camera-card.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb @@ -344,6 +354,8 @@ x1e80100-qcp-el2-dtbs := x1e80100-qcp.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1e80100-qcp.dtb x1e80100-qcp-el2.dtb x1p42100-asus-zenbook-a14-el2-dtbs := x1p42100-asus-zenbook-a14.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1p42100-asus-zenbook-a14.dtb x1p42100-asus-zenbook-a14-el2.dtb +x1p42100-asus-zenbook-a14-lcd-el2-dtbs := x1p42100-asus-zenbook-a14-lcd.dtb x1-el2.dtbo +dtb-$(CONFIG_ARCH_QCOM) += x1p42100-asus-zenbook-a14-lcd.dtb x1p42100-asus-zenbook-a14-lcd-el2.dtb x1p42100-crd-el2-dtbs := x1p42100-crd.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1p42100-crd.dtb x1p42100-crd-el2.dtb x1p42100-hp-omnibook-x14-el2-dtbs := x1p42100-hp-omnibook-x14.dtb x1-el2.dtbo diff --git a/arch/arm64/boot/dts/qcom/agatti.dtsi b/arch/arm64/boot/dts/qcom/agatti.dtsi new file mode 100644 index 00000000000000..8bf5c5583fc22e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/agatti.dtsi @@ -0,0 +1,2750 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2023, Linaro Ltd + * + * Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32764>; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&l2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&cpu_pd0>; + power-domain-names = "psci"; + l2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&l2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&cpu_pd1>; + power-domain-names = "psci"; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&l2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&cpu_pd2>; + power-domain-names = "psci"; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + clocks = <&cpufreq_hw 0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + enable-method = "psci"; + next-level-cache = <&l2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + power-domains = <&cpu_pd3>; + power-domain-names = "psci"; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + }; + }; + + domain-idle-states { + cluster_sleep: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000043>; + entry-latency-us = <800>; + exit-latency-us = <2118>; + min-residency-us = <7376>; + }; + }; + + idle-states { + entry-method = "psci"; + + cpu_sleep: cpu-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <290>; + exit-latency-us = <376>; + min-residency-us = <1182>; + local-timer-stop; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-qcm2290", "qcom,scm"; + clocks = <&rpmcc RPM_SMD_CE1_CLK>; + clock-names = "core"; + qcom,dload-mode = <&tcsr_regs 0x13000>; + #reset-cells = <1>; + interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + }; + }; + + memory@40000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x40000000 0 0>; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + cpu_pd0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&cpu_sleep>; + }; + + cpu_pd1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&cpu_sleep>; + }; + + cpu_pd2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&cpu_sleep>; + }; + + cpu_pd3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&cpu_sleep>; + }; + + cluster_pd: power-domain-cpu-cluster { + #power-domain-cells = <0>; + power-domains = <&mpm>; + domain-idle-states = <&cluster_sleep>; + }; + }; + + rpm: remoteproc { + compatible = "qcom,qcm2290-rpm-proc", "qcom,rpm-proc"; + + glink-edge { + compatible = "qcom,glink-rpm"; + interrupts = ; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-qcm2290", "qcom,glink-smd-rpm"; + qcom,glink-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-qcm2290", "qcom,rpmcc"; + clocks = <&xo_board>; + clock-names = "xo"; + #clock-cells = <1>; + }; + + rpmpd: power-controller { + compatible = "qcom,qcm2290-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_min_svs: opp1 { + opp-level = ; + }; + + rpmpd_opp_low_svs: opp2 { + opp-level = ; + }; + + rpmpd_opp_svs: opp3 { + opp-level = ; + }; + + rpmpd_opp_svs_plus: opp4 { + opp-level = ; + }; + + rpmpd_opp_nom: opp5 { + opp-level = ; + }; + + rpmpd_opp_nom_plus: opp6 { + opp-level = ; + }; + + rpmpd_opp_turbo: opp7 { + opp-level = ; + }; + + rpmpd_opp_turbo_plus: opp8 { + opp-level = ; + }; + }; + }; + }; + }; + + mpm: interrupt-controller { + compatible = "qcom,mpm"; + qcom,rpm-msg-ram = <&apss_mpm>; + interrupts = ; + mboxes = <&apcs_glb 1>; + interrupt-controller; + #interrupt-cells = <2>; + #power-domain-cells = <0>; + interrupt-parent = <&intc>; + qcom,mpm-pin-count = <96>; + qcom,mpm-pin-map = <2 275>, /* TSENS0 uplow */ + <5 296>, /* Soundwire master_irq */ + <12 422>, /* DWC3 ss_phy_irq */ + <24 79>, /* Soundwire wake_irq */ + <86 183>, /* MPM wake, SPMI */ + <90 260>; /* QUSB2_PHY DP+DM */ + }; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: hyp@45700000 { + reg = <0x0 0x45700000 0x0 0x600000>; + no-map; + }; + + xbl_aop_mem: xbl-aop@45e00000 { + reg = <0x0 0x45e00000 0x0 0x140000>; + no-map; + }; + + sec_apps_mem: sec-apps@45fff000 { + reg = <0x0 0x45fff000 0x0 0x1000>; + no-map; + }; + + smem_mem: smem@46000000 { + compatible = "qcom,smem"; + reg = <0x0 0x46000000 0x0 0x200000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + }; + + pil_modem_mem: modem@4ab00000 { + reg = <0x0 0x4ab00000 0x0 0x6900000>; + no-map; + }; + + pil_video_mem: video@51400000 { + reg = <0x0 0x51400000 0x0 0x500000>; + no-map; + }; + + wlan_msa_mem: wlan-msa@51900000 { + reg = <0x0 0x51900000 0x0 0x100000>; + no-map; + }; + + pil_adsp_mem: adsp@51a00000 { + reg = <0x0 0x51a00000 0x0 0x1c00000>; + no-map; + }; + + pil_ipa_fw_mem: ipa-fw@53600000 { + reg = <0x0 0x53600000 0x0 0x10000>; + no-map; + }; + + pil_ipa_gsi_mem: ipa-gsi@53610000 { + reg = <0x0 0x53610000 0x0 0x5000>; + no-map; + }; + + pil_gpu_mem: zap@53615000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x53615000 0x0 0x2000>; + no-map; + }; + + cont_splash_memory: framebuffer@5c000000 { + reg = <0x0 0x5c000000 0x0 0x00f00000>; + no-map; + }; + + dfps_data_memory: dpfs-data@5cf00000 { + reg = <0x0 0x5cf00000 0x0 0x0100000>; + no-map; + }; + + removed_mem: reserved@60000000 { + reg = <0x0 0x60000000 0x0 0x3900000>; + no-map; + }; + + rmtfs_mem: memory@89b01000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x89b01000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = ; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = ; + + mboxes = <&apcs_glb 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = ; + + mboxes = <&apcs_glb 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + wlan_smp2p_in: wlan-wpss-to-ap { + qcom,entry-name = "wlan"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + + tcsr_mutex: hwlock@340000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x00340000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr_regs: syscon@3c0000 { + compatible = "qcom,qcm2290-tcsr", "syscon"; + reg = <0x0 0x003c0000 0x0 0x40000>; + }; + + tlmm: pinctrl@500000 { + compatible = "qcom,qcm2290-tlmm"; + reg = <0x0 0x00500000 0x0 0x300000>; + interrupts = ; + gpio-controller; + gpio-ranges = <&tlmm 0 0 127>; + wakeup-parent = <&mpm>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + qup_i2c0_default: qup-i2c0-default-state { + pins = "gpio0", "gpio1"; + function = "qup0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c1_default: qup-i2c1-default-state { + pins = "gpio4", "gpio5"; + function = "qup1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c2_default: qup-i2c2-default-state { + pins = "gpio6", "gpio7"; + function = "qup2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c3_default: qup-i2c3-default-state { + pins = "gpio8", "gpio9"; + function = "qup3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c4_default: qup-i2c4-default-state { + pins = "gpio12", "gpio13"; + function = "qup4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c5_default: qup-i2c5-default-state { + pins = "gpio14", "gpio15"; + function = "qup5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi0_default: qup-spi0-default-state { + pins = "gpio0", "gpio1","gpio2", "gpio3"; + function = "qup0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi1_default: qup-spi1-default-state { + pins = "gpio4", "gpio5", "gpio69", "gpio70"; + function = "qup1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi2_default: qup-spi2-default-state { + pins = "gpio6", "gpio7", "gpio71", "gpio80"; + function = "qup2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi3_default: qup-spi3-default-state { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "qup3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi4_default: qup-spi4-default-state { + pins = "gpio12", "gpio13", "gpio96", "gpio97"; + function = "qup4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi5_default: qup-spi5-default-state { + pins = "gpio14", "gpio15", "gpio16", "gpio17"; + function = "qup5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart0_default: qup-uart0-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "qup0"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart1_default: qup-uart1-default-state { + pins = "gpio4", "gpio5", "gpio69", "gpio70"; + function = "qup1"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart3_default: qup-uart3-default-state { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "qup3"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart4_default: qup-uart4-default-state { + pins = "gpio12", "gpio13"; + function = "qup4"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart5_default: qup-uart5-default-state { + pins = "gpio14", "gpio15", "gpio16", "gpio17"; + function = "qup5"; + drive-strength = <2>; + bias-disable; + }; + + cci0_default: cci0-default-state { + pins = "gpio22", "gpio23"; + function = "cci_i2c"; + drive-strength = <2>; + bias-disable; + }; + + cci1_default: cci1-default-state { + pins = "gpio29", "gpio30"; + function = "cci_i2c"; + drive-strength = <2>; + bias-disable; + }; + + sdc1_state_on: sdc1-on-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_state_off: sdc1-off-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <2>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc2_state_on: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_state_off: sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; + + lpass_tlmm: pinctrl@a7c0000 { + compatible = "qcom,qcm2290-lpass-lpi-pinctrl", + "qcom,sm6115-lpass-lpi-pinctrl"; + reg = <0x0 0x0a7c0000 0x0 0x20000>, + <0x0 0x0a950000 0x0 0x10000>; + + clocks = <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 19>; + + lpi_i2s2_active: lpi-i2s2-active-state { + sck-pins { + pins = "gpio10"; + function = "i2s2_clk"; + bias-disable; + drive-strength = <8>; + }; + + ws-pins { + pins = "gpio11"; + function = "i2s2_ws"; + bias-disable; + drive-strength = <8>; + }; + + data-pins { + pins = "gpio12"; + function = "i2s2_data"; + bias-disable; + drive-strength = <8>; + }; + }; + }; + + gcc: clock-controller@1400000 { + compatible = "qcom,gcc-qcm2290"; + reg = <0x0 0x01400000 0x0 0x1f0000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; + clock-names = "bi_tcxo", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + usb_hsphy: phy@1613000 { + compatible = "qcom,qcm2290-qusb2-phy"; + reg = <0x0 0x01613000 0x0 0x180>; + + clocks = <&gcc GCC_AHB2PHY_USB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2_hstx_trim>; + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_qmpphy: phy@1615000 { + compatible = "qcom,qcm2290-qmp-usb3-phy"; + reg = <0x0 0x01615000 0x0 0x1000>; + + clocks = <&gcc GCC_AHB2PHY_USB_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "cfg_ahb", + "ref", + "com_aux", + "pipe"; + + resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>, + <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>; + reset-names = "phy", + "phy_phy"; + + #clock-cells = <0>; + clock-output-names = "usb3_phy_pipe_clk_src"; + + #phy-cells = <0>; + orientation-switch; + + qcom,tcsr-reg = <&tcsr_regs 0xb244>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_dwc3_ss>; + }; + }; + }; + }; + + system_noc: interconnect@1880000 { + compatible = "qcom,qcm2290-snoc"; + reg = <0x0 0x01880000 0x0 0x60200>; + #interconnect-cells = <2>; + + qup_virt: interconnect-qup { + compatible = "qcom,qcm2290-qup-virt"; + #interconnect-cells = <2>; + }; + + mmnrt_virt: interconnect-mmnrt { + compatible = "qcom,qcm2290-mmnrt-virt"; + #interconnect-cells = <2>; + }; + + mmrt_virt: interconnect-mmrt { + compatible = "qcom,qcm2290-mmrt-virt"; + #interconnect-cells = <2>; + }; + }; + + config_noc: interconnect@1900000 { + compatible = "qcom,qcm2290-cnoc"; + reg = <0x0 0x01900000 0x0 0x8200>; + #interconnect-cells = <2>; + }; + + cryptobam: dma-controller@1b04000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x0 0x01b04000 0x0 0x24000>; + interrupts = ; + clocks = <&rpmcc RPM_SMD_CE1_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + iommus = <&apps_smmu 0x0084 0x11>, + <&apps_smmu 0x0086 0x11>; + }; + + crypto: crypto@1b3a000 { + compatible = "qcom,qcm2290-qce", "qcom,ipq4019-qce", "qcom,qce"; + reg = <0x0 0x01b3a000 0x0 0x6000>; + clocks = <&rpmcc RPM_SMD_CE1_CLK>; + clock-names = "core"; + dmas = <&cryptobam 6>, <&cryptobam 7>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x0084 0x11>, + <&apps_smmu 0x0086 0x11>; + }; + + qfprom@1b44000 { + compatible = "qcom,qcm2290-qfprom", "qcom,qfprom"; + reg = <0x0 0x01b44000 0x0 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2_hstx_trim: hstx-trim@25b { + reg = <0x25b 0x1>; + bits = <1 4>; + }; + + gpu_speed_bin: gpu-speed-bin@2006 { + reg = <0x2006 0x2>; + bits = <5 8>; + }; + }; + + pmu@1b8e300 { + compatible = "qcom,qcm2290-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0x0 0x01b8e300 0x0 0x600>; + interrupts = ; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + interconnects = <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG + &bimc SLAVE_EBI1 RPM_ACTIVE_TAG>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <(200 * 4 * 1000)>; + }; + + opp-1 { + opp-peak-kBps = <(300 * 4 * 1000)>; + }; + + opp-2 { + opp-peak-kBps = <(451 * 4 * 1000)>; + }; + + opp-3 { + opp-peak-kBps = <(547 * 4 * 1000)>; + }; + + opp-4 { + opp-peak-kBps = <(681 * 4 * 1000)>; + }; + + opp-5 { + opp-peak-kBps = <(768 * 4 * 1000)>; + }; + + opp-6 { + opp-peak-kBps = <(1017 * 4 * 1000)>; + }; + + opp-7 { + opp-peak-kBps = <(1353 * 4 * 1000)>; + }; + + opp-8 { + opp-peak-kBps = <(1555 * 4 * 1000)>; + }; + + opp-9 { + opp-peak-kBps = <(1804 * 4 * 1000)>; + }; + }; + }; + + spmi_bus: spmi@1c40000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0x01c40000 0x0 0x1100>, + <0x0 0x01e00000 0x0 0x2000000>, + <0x0 0x03e00000 0x0 0x100000>, + <0x0 0x03f00000 0x0 0xa0000>, + <0x0 0x01c0a000 0x0 0x26000>; + reg-names = "core", + "chnls", + "obsrvr", + "intr", + "cnfg"; + interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tsens0: thermal-sensor@4411000 { + compatible = "qcom,qcm2290-tsens", "qcom,tsens-v2"; + reg = <0x0 0x04411000 0x0 0x1ff>, + <0x0 0x04410000 0x0 0x8>; + #qcom,sensors = <10>; + interrupts-extended = <&mpm 2 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + rng: rng@4453000 { + compatible = "qcom,prng-ee"; + reg = <0x0 0x04453000 0x0 0x1000>; + clocks = <&rpmcc RPM_SMD_HWKM_CLK>; + clock-names = "core"; + }; + + bimc: interconnect@4480000 { + compatible = "qcom,qcm2290-bimc"; + reg = <0x0 0x04480000 0x0 0x80000>; + #interconnect-cells = <2>; + }; + + rpm_msg_ram: sram@45f0000 { + compatible = "qcom,rpm-msg-ram", "mmio-sram"; + reg = <0x0 0x045f0000 0x0 0x7000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x045f0000 0x7000>; + + apss_mpm: sram@1b8 { + reg = <0x1b8 0x48>; + }; + }; + + sram@4690000 { + compatible = "qcom,rpm-stats"; + reg = <0x0 0x04690000 0x0 0x10000>; + }; + + sdhc_1: mmc@4744000 { + compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x04744000 0x0 0x1000>, + <0x0 0x04745000 0x0 0x1000>, + <0x0 0x04748000 0x0 0x8000>; + reg-names = "hc", + "cqhci", + "ice"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_SDCC1_ICE_CORE_CLK>; + clock-names = "iface", + "core", + "xo", + "ice"; + + resets = <&gcc GCC_SDCC1_BCR>; + + power-domains = <&rpmpd QCM2290_VDDCX>; + operating-points-v2 = <&sdhc1_opp_table>; + iommus = <&apps_smmu 0xc0 0x0>; + interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_SDCC_1 RPM_ALWAYS_TAG>; + interconnect-names = "sdhc-ddr", + "cpu-sdhc"; + + qcom,dll-config = <0x000f642c>; + qcom,ddr-config = <0x80040868>; + bus-width = <8>; + + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + + status = "disabled"; + + sdhc1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <250000 133320>; + opp-avg-kBps = <102400 65000>; + }; + + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <800000 300000>; + opp-avg-kBps = <204800 200000>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmpd_opp_svs_plus>; + opp-peak-kBps = <800000 300000>; + opp-avg-kBps = <204800 200000>; + }; + }; + }; + + sdhc_2: mmc@4784000 { + compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x04784000 0x0 0x1000>; + reg-names = "hc"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "core", + "xo"; + + resets = <&gcc GCC_SDCC2_BCR>; + + power-domains = <&rpmpd QCM2290_VDDCX>; + operating-points-v2 = <&sdhc2_opp_table>; + iommus = <&apps_smmu 0xa0 0x0>; + interconnects = <&system_noc MASTER_SDCC_2 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_SDCC_2 RPM_ALWAYS_TAG>; + interconnect-names = "sdhc-ddr", + "cpu-sdhc"; + + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + bus-width = <4>; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <250000 133320>; + opp-avg-kBps = <261438 150000>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmpd_opp_svs_plus>; + opp-peak-kBps = <800000 300000>; + opp-avg-kBps = <261438 300000>; + }; + }; + }; + + gpi_dma0: dma-controller@4a00000 { + compatible = "qcom,qcm2290-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0x0 0x04a00000 0x0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + ; + dma-channels = <10>; + dma-channel-mask = <0x1f>; + iommus = <&apps_smmu 0xf6 0x0>; + #dma-cells = <3>; + status = "disabled"; + }; + + qupv3_id_0: geniqup@4ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x04ac0000 0x0 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + iommus = <&apps_smmu 0xe3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c0: i2c@4a80000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a80000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c0_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@4a80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a80000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi0_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart0: serial@4a80000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a80000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart0_default>; + pinctrl-names = "default"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; + status = "disabled"; + }; + + i2c1: i2c@4a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a84000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c1_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@4a84000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a84000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi1_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart1: serial@4a84000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a84000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart1_default>; + pinctrl-names = "default"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; + status = "disabled"; + }; + + i2c2: i2c@4a88000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a88000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c2_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@4a88000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a88000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi2_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@4a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a8c000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c3_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@4a8c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a8c000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi3_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart3: serial@4a8c000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a8c000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart3_default>; + pinctrl-names = "default"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; + status = "disabled"; + }; + + i2c4: i2c@4a90000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a90000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c4_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@4a90000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a90000 0x0 0x4000>; + interrupts = ; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_default>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart4: serial@4a90000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a90000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart4_default>; + pinctrl-names = "default"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; + status = "disabled"; + }; + + i2c5: i2c@4a94000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x04a94000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c5_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@4a94000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x04a94000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi5_default>; + pinctrl-names = "default"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart5: serial@4a94000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a94000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart5_default>; + pinctrl-names = "default"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; + status = "disabled"; + }; + }; + + usb: usb@4ef8800 { + compatible = "qcom,qcm2290-dwc3", "qcom,dwc3"; + reg = <0x0 0x04ef8800 0x0 0x400>; + interrupts-extended = <&intc GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <&mpm 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq"; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <133333333>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + /* TODO: USB<->IPA path */ + interconnects = <&system_noc MASTER_USB3_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_USB3 RPM_ALWAYS_TAG>; + interconnect-names = "usb-ddr", + "apps-usb"; + wakeup-source; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_dwc3: usb@4e00000 { + compatible = "snps,dwc3"; + reg = <0x0 0x04e00000 0x0 0xcd00>; + interrupts = ; + phys = <&usb_hsphy>, <&usb_qmpphy>; + phy-names = "usb2-phy", "usb3-phy"; + iommus = <&apps_smmu 0x120 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x10>; + snps,usb3_lpm_capable; + snps,parkmode-disable-ss-quirk; + maximum-speed = "super-speed"; + dr_mode = "otg"; + usb-role-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_dwc3_ss: endpoint { + remote-endpoint = <&usb_qmpphy_usb_ss_in>; + }; + }; + }; + }; + }; + + gpu: gpu@5900000 { + compatible = "qcom,adreno-07000200", "qcom,adreno"; + reg = <0x0 0x05900000 0x0 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = ; + + clocks = <&gpucc GPU_CC_GX_GFX3D_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gcc GCC_BIMC_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>; + clock-names = "core", + "iface", + "mem_iface", + "alt_mem_iface", + "gmu", + "xo"; + + interconnects = <&bimc MASTER_GFX3D RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "gfx-mem"; + + iommus = <&adreno_smmu 0 1>, + <&adreno_smmu 2 0>; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&rpmpd QCM2290_VDDCX>; + qcom,gmu = <&gmu_wrapper>; + + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + #cooling-cells = <2>; + + status = "disabled"; + + gpu_zap_shader: zap-shader { + memory-region = <&pil_gpu_mem>; + }; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* TODO: Scale RPM_SMD_BIMC_GPU_CLK w/ turbo freqs */ + opp-1123200000 { + opp-hz = /bits/ 64 <1123200000>; + required-opps = <&rpmpd_opp_turbo_plus>; + opp-peak-kBps = <6881000>; + opp-supported-hw = <0x3>; + turbo-mode; + }; + + opp-1017600000 { + opp-hz = /bits/ 64 <1017600000>; + required-opps = <&rpmpd_opp_turbo>; + opp-peak-kBps = <6881000>; + opp-supported-hw = <0x3>; + turbo-mode; + }; + + opp-921600000 { + opp-hz = /bits/ 64 <921600000>; + required-opps = <&rpmpd_opp_nom_plus>; + opp-peak-kBps = <6881000>; + opp-supported-hw = <0x3>; + }; + + opp-844800000 { + opp-hz = /bits/ 64 <844800000>; + required-opps = <&rpmpd_opp_nom>; + opp-peak-kBps = <6881000>; + opp-supported-hw = <0x7>; + }; + + opp-672000000 { + opp-hz = /bits/ 64 <672000000>; + required-opps = <&rpmpd_opp_svs_plus>; + opp-peak-kBps = <3879000>; + opp-supported-hw = <0xf>; + }; + + opp-537600000 { + opp-hz = /bits/ 64 <537600000>; + required-opps = <&rpmpd_opp_svs>; + opp-peak-kBps = <2929000>; + opp-supported-hw = <0xf>; + }; + + opp-355200000 { + opp-hz = /bits/ 64 <355200000>; + required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <1720000>; + opp-supported-hw = <0xf>; + }; + }; + }; + + gmu_wrapper: gmu@596a000 { + compatible = "qcom,adreno-gmu-wrapper"; + reg = <0x0 0x0596a000 0x0 0x30000>; + reg-names = "gmu"; + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", + "gx"; + }; + + gpucc: clock-controller@5990000 { + compatible = "qcom,qcm2290-gpucc"; + reg = <0x0 0x05990000 0x0 0x9000>; + clocks = <&gcc GCC_GPU_CFG_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + power-domains = <&rpmpd QCM2290_VDDCX>; + required-opps = <&rpmpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@59a0000 { + compatible = "qcom,qcm2290-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x059a0000 0x0 0x10000>; + interrupts = , + , + , + , + , + , + , + , + ; + + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; + clock-names = "mem", + "hlos", + "iface"; + + power-domains = <&gpucc GPU_CX_GDSC>; + + #global-interrupts = <1>; + #iommu-cells = <2>; + }; + + cci: cci@5c1b000 { + compatible = "qcom,qcm2290-cci", "qcom,msm8996-cci"; + reg = <0x0 0x5c1b000 0x0 0x1000>; + + interrupts = ; + + clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, <&gcc GCC_CAMSS_CCI_0_CLK>; + clock-names = "ahb", "cci"; + assigned-clocks = <&gcc GCC_CAMSS_CCI_0_CLK>; + assigned-clock-rates = <37500000>; + + power-domains = <&gcc GCC_CAMSS_TOP_GDSC>; + + pinctrl-0 = <&cci0_default &cci1_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + cci_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + camss: camss@5c11000 { + compatible = "qcom,qcm2290-camss"; + + reg = <0x0 0x5c11000 0x0 0x1000>, + <0x0 0x5c6e000 0x0 0x1000>, + <0x0 0x5c75000 0x0 0x1000>, + <0x0 0x5c52000 0x0 0x1000>, + <0x0 0x5c53000 0x0 0x1000>, + <0x0 0x5c66000 0x0 0x400>, + <0x0 0x5c68000 0x0 0x400>, + <0x0 0x5c6f000 0x0 0x4000>, + <0x0 0x5c76000 0x0 0x4000>; + reg-names = "top", + "csid0", + "csid1", + "csiphy0", + "csiphy1", + "csitpg0", + "csitpg1", + "vfe0", + "vfe1"; + + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&gcc GCC_CAMSS_AXI_CLK>, + <&gcc GCC_CAMSS_NRT_AXI_CLK>, + <&gcc GCC_CAMSS_RT_AXI_CLK>, + <&gcc GCC_CAMSS_TFE_0_CSID_CLK>, + <&gcc GCC_CAMSS_TFE_1_CSID_CLK>, + <&gcc GCC_CAMSS_CPHY_0_CLK>, + <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>, + <&gcc GCC_CAMSS_CPHY_1_CLK>, + <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>, + <&gcc GCC_CAMSS_TOP_AHB_CLK>, + <&gcc GCC_CAMSS_TFE_0_CLK>, + <&gcc GCC_CAMSS_TFE_0_CPHY_RX_CLK>, + <&gcc GCC_CAMSS_TFE_1_CLK>, + <&gcc GCC_CAMSS_TFE_1_CPHY_RX_CLK> ; + clock-names = "ahb", + "axi", + "camnoc_nrt_axi", + "camnoc_rt_axi", + "csi0", + "csi1", + "csiphy0", + "csiphy0_timer", + "csiphy1", + "csiphy1_timer", + "top_ahb", + "vfe0", + "vfe0_cphy_rx", + "vfe1", + "vfe1_cphy_rx"; + + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "csid0", + "csid1", + "csiphy0", + "csiphy1", + "csitpg0", + "csitpg1", + "vfe0", + "vfe1"; + + interconnects = <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG + &config_noc SLAVE_CAMERA_CFG RPM_ACTIVE_TAG>, + <&mmrt_virt MASTER_CAMNOC_HF RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, + <&mmnrt_virt MASTER_CAMNOC_SF RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "ahb", + "hf_mnoc", + "sf_mnoc"; + + iommus = <&apps_smmu 0x400 0x0>, + <&apps_smmu 0x800 0x0>, + <&apps_smmu 0x820 0x0>, + <&apps_smmu 0x840 0x0>; + + power-domains = <&gcc GCC_CAMSS_TOP_GDSC>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + }; + }; + }; + + mdss: display-subsystem@5e00000 { + compatible = "qcom,qcm2290-mdss"; + reg = <0x0 0x05e00000 0x0 0x1000>; + reg-names = "mdss"; + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "bus", + "core"; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + power-domains = <&dispcc MDSS_GDSC>; + + iommus = <&apps_smmu 0x420 0x2>, + <&apps_smmu 0x421 0x0>; + interconnects = <&mmrt_virt MASTER_MDP0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_DISPLAY_CFG RPM_ALWAYS_TAG>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdp: display-controller@5e01000 { + compatible = "qcom,qcm2290-dpu"; + reg = <0x0 0x05e01000 0x0 0x8f000>, + <0x0 0x05eb0000 0x0 0x3000>; + reg-names = "mdp", + "vbif"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "iface", + "core", + "lut", + "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd QCM2290_VDDCX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmpd_opp_min_svs>; + }; + + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-256000000 { + opp-hz = /bits/ 64 <256000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-307200000 { + opp-hz = /bits/ 64 <307200000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + }; + + mdss_dsi0: dsi@5e94000 { + compatible = "qcom,qcm2290-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0 0x05e94000 0x0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd QCM2290_VDDCX>; + phys = <&mdss_dsi0_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmpd_opp_min_svs>; + }; + + opp-164000000 { + opp-hz = /bits/ 64 <164000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmpd_opp_svs>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@5e94400 { + compatible = "qcom,dsi-phy-14nm-2290"; + reg = <0x0 0x05e94400 0x0 0x100>, + <0x0 0x05e94500 0x0 0x300>, + <0x0 0x05e94800 0x0 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "ref"; + + power-domains = <&rpmpd QCM2290_VDDMX>; + required-opps = <&rpmpd_opp_nom>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + }; + + dispcc: clock-controller@5f00000 { + compatible = "qcom,qcm2290-dispcc"; + reg = <0x0 0x05f00000 0x0 0x20000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&rpmcc RPM_SMD_XO_A_CLK_SRC>, + <&gcc GCC_DISP_GPLL0_CLK_SRC>, + <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, + <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; + clock-names = "bi_tcxo", + "bi_tcxo_ao", + "gcc_disp_gpll0_clk_src", + "gcc_disp_gpll0_div_clk_src", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk"; + #power-domain-cells = <1>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + remoteproc_mpss: remoteproc@6080000 { + compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas"; + reg = <0x0 0x06080000 0x0 0x100>; + + interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack", + "shutdown-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd QCM2290_VDDCX>; + + memory-region = <&pil_modem_mem>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = ; + label = "mpss"; + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 12>; + }; + }; + + remoteproc_adsp: remoteproc@ab00000 { + compatible = "qcom,qcm2290-adsp-pas", "qcom,sm6115-adsp-pas"; + reg = <0x0 0x0ab00000 0x0 0x100>; + + interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd QCM2290_VDD_LPI_CX>, + <&rpmpd QCM2290_VDD_LPI_MX>; + + memory-region = <&pil_adsp_mem>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = ; + label = "lpass"; + qcom,remote-pid = <2>; + mboxes = <&apcs_glb 8>; + + apr { + compatible = "qcom,apr-v2"; + qcom,glink-channels = "apr_audio_svc"; + qcom,domain = ; + #address-cells = <1>; + #size-cells = <0>; + + service@3 { + reg = ; + compatible = "qcom,q6core"; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + }; + + q6afe: service@4 { + compatible = "qcom,q6afe"; + reg = ; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + + q6afecc: clock-controller { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + }; + + q6asm: service@7 { + compatible = "qcom,q6asm"; + reg = ; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x1c1 0x0>; + + dai@0 { + reg = ; + }; + + dai@1 { + reg = ; + }; + + dai@2 { + reg = ; + }; + }; + }; + + q6adm: service@8 { + compatible = "qcom,q6adm"; + reg = ; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + }; + }; + + apps_smmu: iommu@c600000 { + compatible = "qcom,qcm2290-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x0c600000 0x0 0x80000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + venus: video-codec@5a00000 { + compatible = "qcom,qcm2290-venus"; + reg = <0 0x5a00000 0 0xf0000>; + interrupts = ; + + power-domains = <&gcc GCC_VENUS_GDSC>, + <&gcc GCC_VCODEC0_GDSC>, + <&rpmpd QCM2290_VDDCX>; + power-domain-names = "venus", + "vcodec0", + "cx"; + operating-points-v2 = <&venus_opp_table>; + + clocks = <&gcc GCC_VIDEO_VENUS_CTL_CLK>, + <&gcc GCC_VIDEO_AHB_CLK>, + <&gcc GCC_VENUS_CTL_AXI_CLK>, + <&gcc GCC_VIDEO_THROTTLE_CORE_CLK>, + <&gcc GCC_VIDEO_VCODEC0_SYS_CLK>, + <&gcc GCC_VCODEC0_AXI_CLK>; + clock-names = "core", + "iface", + "bus", + "throttle", + "vcodec0_core", + "vcodec0_bus"; + + memory-region = <&pil_video_mem>; + iommus = <&apps_smmu 0x860 0x0>, + <&apps_smmu 0x880 0x0>, + <&apps_smmu 0x861 0x04>, + <&apps_smmu 0x863 0x0>, + <&apps_smmu 0x804 0xe0>; + + interconnects = <&mmnrt_virt MASTER_VIDEO_P0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG + &config_noc SLAVE_VENUS_CFG RPM_ACTIVE_TAG>; + interconnect-names = "video-mem", + "cpu-cfg"; + + venus_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-133333333 { + opp-hz = /bits/ 64 <133333333>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-240000000 { + opp-hz = /bits/ 64 <240000000>; + required-opps = <&rpmpd_opp_svs>; + }; + }; + }; + + wifi: wifi@c800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0x0 0x0c800000 0x0 0x800000>; + reg-names = "membase"; + memory-region = <&wlan_msa_mem>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + iommus = <&apps_smmu 0x1a0 0x1>; + qcom,msa-fixed-perm; + status = "disabled"; + }; + + watchdog@f017000 { + compatible = "qcom,apss-wdt-qcm2290", "qcom,kpss-wdt"; + reg = <0x0 0x0f017000 0x0 0x1000>; + interrupts = , + ; + clocks = <&sleep_clk>; + }; + + apcs_glb: mailbox@f111000 { + compatible = "qcom,qcm2290-apcs-hmss-global"; + reg = <0x0 0x0f111000 0x0 0x1000>; + #mbox-cells = <1>; + }; + + timer@f120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x0f120000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x0f121000 0x8000>; + + frame@0 { + reg = <0x0 0x1000>, + <0x1000 0x1000>; + interrupts = , + ; + frame-number = <0>; + }; + + frame@2000 { + reg = <0x2000 0x1000>; + interrupts = ; + frame-number = <1>; + status = "disabled"; + }; + + frame@3000 { + reg = <0x3000 0x1000>; + interrupts = ; + frame-number = <2>; + status = "disabled"; + }; + + frame@4000 { + reg = <0x4000 0x1000>; + interrupts = ; + frame-number = <3>; + status = "disabled"; + }; + + frame@5000 { + reg = <0x5000 0x1000>; + interrupts = ; + frame-number = <4>; + status = "disabled"; + }; + + frame@6000 { + reg = <0x6000 0x1000>; + interrupts = ; + frame-number = <5>; + status = "disabled"; + }; + + frame@7000 { + reg = <0x7000 0x1000>; + interrupts = ; + frame-number = <6>; + status = "disabled"; + }; + }; + + intc: interrupt-controller@f200000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x0f200000 0x0 0x10000>, + <0x0 0x0f300000 0x0 0x100000>; + interrupts = ; + #interrupt-cells = <3>; + interrupt-controller; + interrupt-parent = <&intc>; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + }; + + cpufreq_hw: cpufreq@f521000 { + compatible = "qcom,qcm2290-cpufreq-hw", "qcom,cpufreq-hw"; + reg = <0x0 0x0f521000 0x0 0x1000>; + reg-names = "freq-domain0"; + interrupts-extended = <&lmh_cluster 0>; + interrupt-names = "dcvsh-irq-0"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + + lmh_cluster: lmh@f550800 { + compatible = "qcom,qcm2290-lmh", "qcom,sm8150-lmh"; + reg = <0x0 0x0f550800 0x0 0x400>; + interrupts = ; + cpus = <&cpu0>; + qcom,lmh-temp-arm-millicelsius = <65000>; + qcom,lmh-temp-low-millicelsius = <94500>; + qcom,lmh-temp-high-millicelsius = <95000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + thermal-zones { + mapss-thermal { + thermal-sensors = <&tsens0 0>; + + trips { + mapss_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mapss_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mapss_crit: mapss-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + video-thermal { + thermal-sensors = <&tsens0 1>; + + trips { + video_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + video_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + video_crit: video-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + wlan-thermal { + thermal-sensors = <&tsens0 2>; + + trips { + wlan_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + wlan_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + wlan_crit: wlan-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss0-thermal { + thermal-sensors = <&tsens0 3>; + + trips { + cpuss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss0_crit: cpuss0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss1-thermal { + thermal-sensors = <&tsens0 4>; + + trips { + cpuss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss1_crit: cpuss1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mdm0-thermal { + thermal-sensors = <&tsens0 5>; + + trips { + mdm0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm0_crit: mdm0-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mdm1-thermal { + thermal-sensors = <&tsens0 6>; + + trips { + mdm1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + mdm1_crit: mdm1-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpu-thermal { + thermal-sensors = <&tsens0 7>; + + trips { + gpu_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_crit: gpu-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + hm-center-thermal { + thermal-sensors = <&tsens0 8>; + + trips { + hm_center_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + hm_center_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + hm_center_crit: hm-center-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + camera-thermal { + thermal-sensors = <&tsens0 9>; + + trips { + camera_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + camera_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + camera_crit: camera-crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts index 5b2e88915c2fdb..9fa70ff6887b78 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -203,6 +203,10 @@ &gpu { status = "okay"; }; +&gpu_zap_shader { + firmware-name = "qcom/apq8096/a530_zap.mbn"; +}; + &hsusb_phy1 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts index df8d6e5c1f45e0..36dd6599402b46 100644 --- a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts +++ b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts @@ -743,20 +743,32 @@ retimer_ss1_con_sbu_out: endpoint { }; &lpass_tlmm { - spkr_01_sd_n_active: spkr-01-sd-n-active-state { + spkr_0_sd_n_active: spkr-0-sd-n-active-state { pins = "gpio12"; function = "gpio"; drive-strength = <16>; bias-disable; - output-low; }; - spkr_23_sd_n_active: spkr-23-sd-n-active-state { + spkr_1_sd_n_active: spkr-1-sd-n-active-state { pins = "gpio13"; function = "gpio"; drive-strength = <16>; bias-disable; - output-low; + }; + + spkr_2_sd_n_active: spkr-2-sd-n-active-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + spkr_3_sd_n_active: spkr-3-sd-n-active-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <16>; + bias-disable; }; }; @@ -908,12 +920,14 @@ &smb2360_2_eusb2_repeater { &swr0 { status = "okay"; - pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>; + pinctrl-0 = <&wsa_swr_active>; pinctrl-names = "default"; /* WSA8845, Left Woofer */ left_woofer: speaker@0,0 { compatible = "sdw20217020400"; + pinctrl-0 = <&spkr_0_sd_n_active>; + pinctrl-names = "default"; reg = <0 0>; reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; #sound-dai-cells = <0>; @@ -926,8 +940,10 @@ left_woofer: speaker@0,0 { /* WSA8845, Left Tweeter */ left_tweeter: speaker@0,1 { compatible = "sdw20217020400"; + pinctrl-0 = <&spkr_1_sd_n_active>; + pinctrl-names = "default"; reg = <0 1>; - reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>; + reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; #sound-dai-cells = <0>; sound-name-prefix = "TweeterLeft"; vdd-1p8-supply = <&vreg_l15b_1p8>; @@ -961,14 +977,16 @@ wcd_tx: codec@0,3 { &swr3 { status = "okay"; - pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>; + pinctrl-0 = <&wsa2_swr_active>; pinctrl-names = "default"; /* WSA8845, Right Woofer */ right_woofer: speaker@0,0 { compatible = "sdw20217020400"; + pinctrl-0 = <&spkr_2_sd_n_active>; + pinctrl-names = "default"; reg = <0 0>; - reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; + reset-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>; #sound-dai-cells = <0>; sound-name-prefix = "WooferRight"; vdd-1p8-supply = <&vreg_l15b_1p8>; @@ -979,8 +997,10 @@ right_woofer: speaker@0,0 { /* WSA8845, Right Tweeter */ right_tweeter: speaker@0,1 { compatible = "sdw20217020400"; + pinctrl-0 = <&spkr_3_sd_n_active>; + pinctrl-names = "default"; reg = <0 1>; - reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>; + reset-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>; #sound-dai-cells = <0>; sound-name-prefix = "TweeterRight"; vdd-1p8-supply = <&vreg_l15b_1p8>; diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi b/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi index 1aead50b8920b5..4a69852e917605 100644 --- a/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi +++ b/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi @@ -3,8 +3,8 @@ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. */ -#include "x1e80100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "hamoa.dtsi" +#include "hamoa-pmics.dtsi" #include #include @@ -451,8 +451,7 @@ &remoteproc_cdsp { }; &tlmm { - gpio-reserved-ranges = <34 2>, /* TPM LP & INT */ - <44 4>; /* SPI (TPM) */ + gpio-reserved-ranges = <34 2>; /* TPM LP & INT */ pcie4_default: pcie4-default-state { clkreq-n-pins { diff --git a/arch/arm64/boot/dts/qcom/hamoa-pmics.dtsi b/arch/arm64/boot/dts/qcom/hamoa-pmics.dtsi new file mode 100644 index 00000000000000..6a31a0adf8be47 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/hamoa-pmics.dtsi @@ -0,0 +1,569 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024, Linaro Limited + */ + +#include +#include +#include +#include + +/ { + thermal-zones { + pm8550-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pm8550_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pm8550ve-2-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pm8550ve_2_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pmc8380-3-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pmc8380_3_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pmc8380-4-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pmc8380_4_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pmc8380-5-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pmc8380_5_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pmc8380_6_thermal: pmc8380-6-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pmc8380_6_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pm8550ve-8-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pm8550ve_8_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pm8550ve-9-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pm8550ve_9_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + + pm8010-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&pm8010_temp_alarm>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + }; + }; + }; +}; + +&spmi_bus0 { + /* PMK8380 */ + pmk8550: pmic@0 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmk8550_pon: pon@1300 { + compatible = "qcom,pmk8350-pon"; + reg = <0x1300>, <0x800>; + reg-names = "hlos", "pbs"; + + pon_pwrkey: pwrkey { + compatible = "qcom,pmk8350-pwrkey"; + interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>; + linux,code = ; + }; + + pon_resin: resin { + compatible = "qcom,pmk8350-resin"; + interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>; + status = "disabled"; + }; + }; + + pmk8550_rtc: rtc@6100 { + compatible = "qcom,pmk8350-rtc"; + reg = <0x6100>, <0x6200>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; + qcom,no-alarm; /* alarm owned by ADSP */ + qcom,uefi-rtc-info; + }; + + pmk8550_sdam_2: nvram@7100 { + compatible = "qcom,spmi-sdam"; + reg = <0x7100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x7100 0x100>; + + reboot_reason: reboot-reason@48 { + reg = <0x48 0x1>; + bits = <1 7>; + }; + }; + + pmk8550_sdam_15: nvram@7e00 { + compatible = "qcom,spmi-sdam"; + reg = <0x7e00>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x7e00 0x100>; + + charge_limit_en: charge-limit-en@73 { + reg = <0x73 0x1>; + }; + + charge_limit_end: charge-limit-end@75 { + reg = <0x75 0x1>; + }; + + charge_limit_delta: charge-limit-delta@76 { + reg = <0x76 0x1>; + }; + }; + + pmk8550_gpios: gpio@8800 { + compatible = "qcom,pmk8550-gpio", "qcom,spmi-gpio"; + reg = <0xb800>; + gpio-controller; + gpio-ranges = <&pmk8550_gpios 0 0 6>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pmk8550_pwm: pwm { + compatible = "qcom,pmk8550-pwm"; + + #pwm-cells = <2>; + + status = "disabled"; + }; + }; + + /* PMC8380C */ + pm8550: pmic@1 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8550_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8550_gpios: gpio@8800 { + compatible = "qcom,pm8550-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8550_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pm8550_flash: led-controller@ee00 { + compatible = "qcom,pm8550-flash-led", "qcom,spmi-flash-led"; + reg = <0xee00>; + status = "disabled"; + }; + + pm8550_pwm: pwm { + compatible = "qcom,pm8550-pwm", "qcom,pm8350c-pwm"; + #pwm-cells = <2>; + + status = "disabled"; + }; + }; + + /* PMC8380VE */ + pm8550ve_2: pmic@2 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8550ve_2_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8550ve_2_gpios: gpio@8800 { + compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8550ve_2_gpios 0 0 8>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + /* PMC8380 is actually not a PM8550 series rebrand */ + pmc8380_3: pmic@3 { + compatible = "qcom,pmc8380", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmc8380_3_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmc8380_3_gpios: gpio@8800 { + compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmc8380_3_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmc8380_4: pmic@4 { + compatible = "qcom,pmc8380", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmc8380_4_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmc8380_4_gpios: gpio@8800 { + compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmc8380_4_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmc8380_5: pmic@5 { + compatible = "qcom,pmc8380", "qcom,spmi-pmic"; + reg = <0x5 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmc8380_5_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmc8380_5_gpios: gpio@8800 { + compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmc8380_5_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmc8380_6: pmic@6 { + compatible = "qcom,pmc8380", "qcom,spmi-pmic"; + reg = <0x6 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmc8380_6_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pmc8380_6_gpios: gpio@8800 { + compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmc8380_6_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + /* PMC8380VE */ + pm8550ve_8: pmic@8 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x8 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8550ve_8_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x8 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8550ve_8_gpios: gpio@8800 { + compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8550ve_8_gpios 0 0 8>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + /* PMC8380VE */ + pm8550ve_9: pmic@9 { + compatible = "qcom,pm8550", "qcom,spmi-pmic"; + reg = <0x9 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8550ve_9_temp_alarm: temp-alarm@a00 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0xa00>; + interrupts = <0x9 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + + pm8550ve_9_gpios: gpio@8800 { + compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pm8550ve_9_gpios 0 0 8>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8010: pmic@c { + compatible = "qcom,pm8010", "qcom,spmi-pmic"; + reg = <0xc SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + pm8010_temp_alarm: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0xc 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + }; +}; + +&spmi_bus1 { + smb2360_0: pmic@7 { + compatible = "qcom,smb2360", "qcom,spmi-pmic"; + reg = <0x7 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + smb2360_0_eusb2_repeater: phy@fd00 { + compatible = "qcom,smb2360-eusb2-repeater"; + reg = <0xfd00>; + #phy-cells = <0>; + }; + }; + + smb2360_1: pmic@a { + compatible = "qcom,smb2360", "qcom,spmi-pmic"; + reg = <0xa SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + smb2360_1_eusb2_repeater: phy@fd00 { + compatible = "qcom,smb2360-eusb2-repeater"; + reg = <0xfd00>; + #phy-cells = <0>; + }; + }; + + smb2360_2: pmic@b { + compatible = "qcom,smb2360", "qcom,spmi-pmic"; + reg = <0xb SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + smb2360_2_eusb2_repeater: phy@fd00 { + compatible = "qcom,smb2360-eusb2-repeater"; + reg = <0xfd00>; + #phy-cells = <0>; + }; + }; + + smb2360_3: pmic@c { + compatible = "qcom,smb2360", "qcom,spmi-pmic"; + reg = <0xc SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + smb2360_3_eusb2_repeater: phy@fd00 { + compatible = "qcom,smb2360-eusb2-repeater"; + reg = <0xfd00>; + #phy-cells = <0>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/hamoa.dtsi b/arch/arm64/boot/dts/qcom/hamoa.dtsi new file mode 100644 index 00000000000000..a17900eacb2039 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/hamoa.dtsi @@ -0,0 +1,9629 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + clock-frequency = <76800000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32764>; + #clock-cells = <0>; + }; + + bi_tcxo_div2: bi-tcxo-div2-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-mult = <1>; + clock-div = <2>; + }; + + bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK_A>; + clock-mult = <1>; + clock-div = <2>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&l2_0>; + power-domains = <&cpu_pd0>, <&scmi_dvfs 0>; + power-domain-names = "psci", "perf"; + + l2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&l2_0>; + power-domains = <&cpu_pd1>, <&scmi_dvfs 0>; + power-domain-names = "psci", "perf"; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&l2_0>; + power-domains = <&cpu_pd2>, <&scmi_dvfs 0>; + power-domain-names = "psci", "perf"; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&l2_0>; + power-domains = <&cpu_pd3>, <&scmi_dvfs 0>; + power-domain-names = "psci", "perf"; + }; + + cpu4: cpu@10000 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x10000>; + enable-method = "psci"; + next-level-cache = <&l2_1>; + power-domains = <&cpu_pd4>, <&scmi_dvfs 1>; + power-domain-names = "psci", "perf"; + + l2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + cpu5: cpu@10100 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x10100>; + enable-method = "psci"; + next-level-cache = <&l2_1>; + power-domains = <&cpu_pd5>, <&scmi_dvfs 1>; + power-domain-names = "psci", "perf"; + }; + + cpu6: cpu@10200 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x10200>; + enable-method = "psci"; + next-level-cache = <&l2_1>; + power-domains = <&cpu_pd6>, <&scmi_dvfs 1>; + power-domain-names = "psci", "perf"; + }; + + cpu7: cpu@10300 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x10300>; + enable-method = "psci"; + next-level-cache = <&l2_1>; + power-domains = <&cpu_pd7>, <&scmi_dvfs 1>; + power-domain-names = "psci", "perf"; + }; + + cpu8: cpu@20000 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x20000>; + enable-method = "psci"; + next-level-cache = <&l2_2>; + power-domains = <&cpu_pd8>, <&scmi_dvfs 2>; + power-domain-names = "psci", "perf"; + + l2_2: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + cpu9: cpu@20100 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x20100>; + enable-method = "psci"; + next-level-cache = <&l2_2>; + power-domains = <&cpu_pd9>, <&scmi_dvfs 2>; + power-domain-names = "psci", "perf"; + }; + + cpu10: cpu@20200 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x20200>; + enable-method = "psci"; + next-level-cache = <&l2_2>; + power-domains = <&cpu_pd10>, <&scmi_dvfs 2>; + power-domain-names = "psci", "perf"; + }; + + cpu11: cpu@20300 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x20300>; + enable-method = "psci"; + next-level-cache = <&l2_2>; + power-domains = <&cpu_pd11>, <&scmi_dvfs 2>; + power-domain-names = "psci", "perf"; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu4>; + }; + + core1 { + cpu = <&cpu5>; + }; + + core2 { + cpu = <&cpu6>; + }; + + core3 { + cpu = <&cpu7>; + }; + }; + + cpu_map_cluster2: cluster2 { + core0 { + cpu = <&cpu8>; + }; + + core1 { + cpu = <&cpu9>; + }; + + core2 { + cpu = <&cpu10>; + }; + + core3 { + cpu = <&cpu11>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + cluster_c4: cpu-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "ret"; + arm,psci-suspend-param = <0x00000004>; + entry-latency-us = <180>; + exit-latency-us = <500>; + min-residency-us = <600>; + }; + }; + + domain-idle-states { + cluster_cl4: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x01000044>; + entry-latency-us = <350>; + exit-latency-us = <500>; + min-residency-us = <2500>; + }; + + cluster_cl5: cluster-sleep-1 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x01000054>; + entry-latency-us = <2200>; + exit-latency-us = <4000>; + min-residency-us = <7000>; + }; + }; + }; + + dummy-sink { + compatible = "arm,coresight-dummy-sink"; + + in-ports { + port { + eud_in: endpoint { + remote-endpoint = <&swao_rep_out1>; + }; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-x1e80100", "qcom,scm"; + interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + qcom,dload-mode = <&tcsr 0x19000>; + }; + + scmi { + compatible = "arm,scmi"; + mboxes = <&cpucp_mbox 0>, <&cpucp_mbox 2>; + mbox-names = "tx", "rx"; + shmem = <&cpu_scp_lpri0>, <&cpu_scp_lpri1>; + + #address-cells = <1>; + #size-cells = <0>; + + scmi_dvfs: protocol@13 { + reg = <0x13>; + #power-domain-cells = <1>; + }; + }; + }; + + clk_virt: interconnect-0 { + compatible = "qcom,x1e80100-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-1 { + compatible = "qcom,x1e80100-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x80000000 0 0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + cpu_pd0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd0>; + domain-idle-states = <&cluster_c4>; + }; + + cpu_pd1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd0>; + domain-idle-states = <&cluster_c4>; + }; + + cpu_pd2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd0>; + domain-idle-states = <&cluster_c4>; + }; + + cpu_pd3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd0>; + domain-idle-states = <&cluster_c4>; + }; + + cpu_pd4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd1>; + domain-idle-states = <&cluster_c4>; + }; + + cpu_pd5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd1>; + domain-idle-states = <&cluster_c4>; + }; + + cpu_pd6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd1>; + domain-idle-states = <&cluster_c4>; + }; + + cpu_pd7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd1>; + domain-idle-states = <&cluster_c4>; + }; + + cpu_pd8: power-domain-cpu8 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd2>; + domain-idle-states = <&cluster_c4>; + }; + + cpu_pd9: power-domain-cpu9 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd2>; + domain-idle-states = <&cluster_c4>; + }; + + cpu_pd10: power-domain-cpu10 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd2>; + domain-idle-states = <&cluster_c4>; + }; + + cpu_pd11: power-domain-cpu11 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd2>; + domain-idle-states = <&cluster_c4>; + }; + + cluster_pd0: power-domain-cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&cluster_cl4>, <&cluster_cl5>; + power-domains = <&system_pd>; + }; + + cluster_pd1: power-domain-cpu-cluster1 { + #power-domain-cells = <0>; + domain-idle-states = <&cluster_cl4>, <&cluster_cl5>; + power-domains = <&system_pd>; + }; + + cluster_pd2: power-domain-cpu-cluster2 { + #power-domain-cells = <0>; + domain-idle-states = <&cluster_cl4>, <&cluster_cl5>; + power-domains = <&system_pd>; + }; + + system_pd: power-domain-system { + #power-domain-cells = <0>; + /* TODO: system-wide idle states */ + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gunyah_hyp_mem: gunyah-hyp@80000000 { + reg = <0x0 0x80000000 0x0 0x800000>; + no-map; + }; + + hyp_elf_package_mem: hyp-elf-package@80800000 { + reg = <0x0 0x80800000 0x0 0x200000>; + no-map; + }; + + ncc_mem: ncc@80a00000 { + reg = <0x0 0x80a00000 0x0 0x400000>; + no-map; + }; + + cpucp_log_mem: cpucp-log@80e00000 { + reg = <0x0 0x80e00000 0x0 0x40000>; + no-map; + }; + + cpucp_mem: cpucp@80e40000 { + reg = <0x0 0x80e40000 0x0 0x540000>; + no-map; + }; + + reserved-region@81380000 { + reg = <0x0 0x81380000 0x0 0x80000>; + no-map; + }; + + tags_mem: tags-region@81400000 { + reg = <0x0 0x81400000 0x0 0x1a0000>; + no-map; + }; + + xbl_dtlog_mem: xbl-dtlog@81a00000 { + reg = <0x0 0x81a00000 0x0 0x40000>; + no-map; + }; + + xbl_ramdump_mem: xbl-ramdump@81a40000 { + reg = <0x0 0x81a40000 0x0 0x1c0000>; + no-map; + }; + + aop_image_mem: aop-image@81c00000 { + reg = <0x0 0x81c00000 0x0 0x60000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db@81c60000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x81c60000 0x0 0x20000>; + no-map; + }; + + aop_config_mem: aop-config@81c80000 { + reg = <0x0 0x81c80000 0x0 0x20000>; + no-map; + }; + + tme_crash_dump_mem: tme-crash-dump@81ca0000 { + reg = <0x0 0x81ca0000 0x0 0x40000>; + no-map; + }; + + tme_log_mem: tme-log@81ce0000 { + reg = <0x0 0x81ce0000 0x0 0x4000>; + no-map; + }; + + uefi_log_mem: uefi-log@81ce4000 { + reg = <0x0 0x81ce4000 0x0 0x10000>; + no-map; + }; + + secdata_apss_mem: secdata-apss@81cff000 { + reg = <0x0 0x81cff000 0x0 0x1000>; + no-map; + }; + + pdp_ns_shared_mem: pdp-ns-shared@81e00000 { + reg = <0x0 0x81e00000 0x0 0x100000>; + no-map; + }; + + gpu_prr_mem: gpu-prr@81f00000 { + reg = <0x0 0x81f00000 0x0 0x10000>; + no-map; + }; + + tpm_control_mem: tpm-control@81f10000 { + reg = <0x0 0x81f10000 0x0 0x10000>; + no-map; + }; + + usb_ucsi_shared_mem: usb-ucsi-shared@81f20000 { + reg = <0x0 0x81f20000 0x0 0x10000>; + no-map; + }; + + pld_pep_mem: pld-pep@81f30000 { + reg = <0x0 0x81f30000 0x0 0x6000>; + no-map; + }; + + pld_gmu_mem: pld-gmu@81f36000 { + reg = <0x0 0x81f36000 0x0 0x1000>; + no-map; + }; + + pld_pdp_mem: pld-pdp@81f37000 { + reg = <0x0 0x81f37000 0x0 0x1000>; + no-map; + }; + + tz_stat_mem: tz-stat@82700000 { + reg = <0x0 0x82700000 0x0 0x100000>; + no-map; + }; + + xbl_tmp_buffer_mem: xbl-tmp-buffer@82800000 { + reg = <0x0 0x82800000 0x0 0xc00000>; + no-map; + }; + + adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap@84b00000 { + reg = <0x0 0x84b00000 0x0 0x800000>; + no-map; + }; + + spu_secure_shared_memory_mem: spu-secure-shared-memory@85300000 { + reg = <0x0 0x85300000 0x0 0x80000>; + no-map; + }; + + adsp_boot_dtb_mem: adsp-boot-dtb@866c0000 { + reg = <0x0 0x866c0000 0x0 0x40000>; + no-map; + }; + + spss_region_mem: spss-region@86700000 { + reg = <0x0 0x86700000 0x0 0x400000>; + no-map; + }; + + adsp_boot_mem: adsp-boot@86b00000 { + reg = <0x0 0x86b00000 0x0 0xc00000>; + no-map; + }; + + video_mem: video@87700000 { + reg = <0x0 0x87700000 0x0 0x700000>; + no-map; + }; + + adspslpi_mem: adspslpi@87e00000 { + reg = <0x0 0x87e00000 0x0 0x3a00000>; + no-map; + }; + + q6_adsp_dtb_mem: q6-adsp-dtb@8b800000 { + reg = <0x0 0x8b800000 0x0 0x80000>; + no-map; + }; + + cdsp_mem: cdsp@8b900000 { + reg = <0x0 0x8b900000 0x0 0x2000000>; + no-map; + }; + + q6_cdsp_dtb_mem: q6-cdsp-dtb@8d900000 { + reg = <0x0 0x8d900000 0x0 0x80000>; + no-map; + }; + + gpu_microcode_mem: gpu-microcode@8d9fe000 { + reg = <0x0 0x8d9fe000 0x0 0x2000>; + no-map; + }; + + cvp_mem: cvp@8da00000 { + reg = <0x0 0x8da00000 0x0 0x700000>; + no-map; + }; + + camera_mem: camera@8e100000 { + reg = <0x0 0x8e100000 0x0 0x800000>; + no-map; + }; + + av1_encoder_mem: av1-encoder@8e900000 { + reg = <0x0 0x8e900000 0x0 0x700000>; + no-map; + }; + + reserved-region@8f000000 { + reg = <0x0 0x8f000000 0x0 0xa00000>; + no-map; + }; + + wpss_mem: wpss@8fa00000 { + reg = <0x0 0x8fa00000 0x0 0x1900000>; + no-map; + }; + + q6_wpss_dtb_mem: q6-wpss-dtb@91300000 { + reg = <0x0 0x91300000 0x0 0x80000>; + no-map; + }; + + xbl_sc_mem: xbl-sc@d8000000 { + reg = <0x0 0xd8000000 0x0 0x40000>; + no-map; + }; + + reserved-region@d8040000 { + reg = <0x0 0xd8040000 0x0 0xa0000>; + no-map; + }; + + qtee_mem: qtee@d80e0000 { + reg = <0x0 0xd80e0000 0x0 0x520000>; + no-map; + }; + + ta_mem: ta@d8600000 { + reg = <0x0 0xd8600000 0x0 0x8a00000>; + no-map; + }; + + tags_mem1: tags@e1000000 { + reg = <0x0 0xe1000000 0x0 0x26a0000>; + no-map; + }; + + llcc_lpi_mem: llcc-lpi@ff800000 { + reg = <0x0 0xff800000 0x0 0x600000>; + no-map; + }; + + smem_mem: smem@ffe00000 { + compatible = "qcom,smem"; + reg = <0x0 0xffe00000 0x0 0x200000>; + hwlocks = <&tcsr_mutex 3>; + no-map; + }; + }; + + qup_opp_table_100mhz: opp-table-qup100mhz { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + + qup_opp_table_120mhz: opp-table-qup120mhz { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-120000000 { + opp-hz = /bits/ 64 <120000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,smem = <443>, <429>; + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,smem = <94>, <432>; + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <2>; + dma-ranges = <0 0 0 0 0x10 0>; + ranges = <0 0 0 0 0x10 0>; + + gcc: clock-controller@100000 { + compatible = "qcom,x1e80100-gcc"; + reg = <0 0x00100000 0 0x200000>; + + clocks = <&bi_tcxo_div2>, + <&sleep_clk>, + <&pcie3_phy>, + <&pcie4_phy>, + <&pcie5_phy>, + <&pcie6a_phy>, + <0>, + <&usb_1_ss0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, + <&usb_1_ss1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, + <&usb_1_ss2_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; + + power-domains = <&rpmhpd RPMHPD_CX>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + ipcc: mailbox@408000 { + compatible = "qcom,x1e80100-ipcc", "qcom,ipcc"; + reg = <0 0x00408000 0 0x1000>; + + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + + #mbox-cells = <2>; + }; + + gpi_dma2: dma-controller@800000 { + compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0 0x00800000 0 0x60000>; + + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + + dma-channels = <12>; + dma-channel-mask = <0x3e>; + #dma-cells = <3>; + + iommus = <&apps_smmu 0x436 0x0>; + + status = "disabled"; + }; + + qupv3_2: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x008c0000 0 0x2000>; + + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + + iommus = <&apps_smmu 0x423 0x0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + i2c16: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, + <&gpi_dma2 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c16_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi16: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00880000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table_120mhz>; + + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, + <&gpi_dma2 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c17: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, + <&gpi_dma2 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c17_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi17: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00884000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table_120mhz>; + + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, + <&gpi_dma2 1 1 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c18: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, + <&gpi_dma2 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c18_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi18: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00888000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, + <&gpi_dma2 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c19: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c19_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi19: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + + dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, + <&gpi_dma2 1 3 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c20: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00890000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c20_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi20: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00890000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + + dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, + <&gpi_dma2 1 4 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c21: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + + dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, + <&gpi_dma2 1 5 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c21_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi21: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, + <&gpi_dma2 1 5 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + uart21: serial@894000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00894000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "qup-core", + "qup-config"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + + pinctrl-0 = <&qup_uart21_default>; + pinctrl-names = "default"; + + status = "disabled"; + }; + + i2c22: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00898000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + + dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>, + <&gpi_dma2 1 6 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c22_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi22: spi@898000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00898000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + + dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>, + <&gpi_dma2 1 6 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi22_data_clk>, <&qup_spi22_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c23: i2c@89c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0089c000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + + dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>, + <&gpi_dma2 1 7 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c23_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi23: spi@89c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0089c000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + + dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>, + <&gpi_dma2 1 7 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi23_data_clk>, <&qup_spi23_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0 0x00a00000 0 0x60000>; + + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + + dma-channels = <12>; + dma-channel-mask = <0x3e>; + #dma-cells = <3>; + + iommus = <&apps_smmu 0x136 0x0>; + + status = "disabled"; + }; + + qupv3_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00ac0000 0 0x2000>; + + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + + iommus = <&apps_smmu 0x123 0x0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c8_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table_120mhz>; + + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c9_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table_120mhz>; + + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c10_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c11_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c12_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c13_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c14_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi14: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a98000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + + dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, + <&gpi_dma1 1 6 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + uart14: serial@a98000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a98000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "qup-core", + "qup-config"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + + pinctrl-0 = <&qup_uart14_default>; + pinctrl-names = "default"; + + status = "disabled"; + }; + + i2c15: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a9c000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + + dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, + <&gpi_dma1 1 7 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c15_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi15: spi@a9c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a9c000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + + dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>, + <&gpi_dma1 1 7 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + gpi_dma0: dma-controller@b00000 { + compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0 0x00b00000 0 0x60000>; + + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + + dma-channels = <12>; + dma-channel-mask = <0x3e>; + #dma-cells = <3>; + + iommus = <&apps_smmu 0x456 0x0>; + + status = "disabled"; + }; + + qupv3_0: geniqup@bc0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00bc0000 0 0x2000>; + + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + + iommus = <&apps_smmu 0x443 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + i2c0: i2c@b80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00b80000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c0_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi0: spi@b80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00b80000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table_120mhz>; + + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c1: i2c@b84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00b84000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c1_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi1: spi@b84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00b84000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table_120mhz>; + + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c2: i2c@b88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00b88000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c2_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + uart2: serial@b88000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00b88000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "qup-core", + "qup-config"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + + pinctrl-0 = <&qup_uart2_default>; + pinctrl-names = "default"; + + status = "disabled"; + }; + + spi2: spi@b88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00b88000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c3: i2c@b8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00b8c000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c3_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi3: spi@b8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00b8c000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c4: i2c@b90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00b90000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c4_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi4: spi@b90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00b90000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c5: i2c@b94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00b94000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c5_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi5: spi@b94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00b94000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c6: i2c@b98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00b98000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c6_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi6: spi@b98000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00b98000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c7: i2c@b9c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00b9c000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + + dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, + <&gpi_dma0 1 7 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c7_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi7: spi@b9c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00b9c000 0 0x4000>; + + interrupts = ; + + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + + dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, + <&gpi_dma0 1 7 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + tsens0: thermal-sensor@c271000 { + compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2"; + reg = <0 0x0c271000 0 0x1000>, + <0 0x0c222000 0 0x1000>; + + interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <16>; + + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c272000 { + compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2"; + reg = <0 0x0c272000 0 0x1000>, + <0 0x0c223000 0 0x1000>; + + interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <16>; + + #thermal-sensor-cells = <1>; + }; + + tsens2: thermal-sensor@c273000 { + compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2"; + reg = <0 0x0c273000 0 0x1000>, + <0 0x0c224000 0 0x1000>; + + interrupts-extended = <&pdc 28 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 643 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <16>; + + #thermal-sensor-cells = <1>; + }; + + tsens3: thermal-sensor@c274000 { + compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2"; + reg = <0 0x0c274000 0 0x1000>, + <0 0x0c225000 0 0x1000>; + + interrupts-extended = <&pdc 29 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <16>; + + #thermal-sensor-cells = <1>; + }; + + usb_1_ss0_hsphy: phy@fd3000 { + compatible = "qcom,x1e80100-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0 0x00fd3000 0 0x154>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + status = "disabled"; + }; + + usb_1_ss0_qmpphy: phy@fd5000 { + compatible = "qcom,x1e80100-qmp-usb3-dp-phy"; + reg = <0 0x00fd5000 0 0x4000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; + + power-domains = <&gcc GCC_USB_0_PHY_GDSC>; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB4_0_DP0_PHY_PRIM_BCR>; + reset-names = "phy", + "common"; + + #clock-cells = <1>; + #phy-cells = <1>; + + mode-switch; + orientation-switch; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_ss0_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_ss0_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_ss0_dwc3_ss>; + }; + }; + + port@2 { + reg = <2>; + + usb_1_ss0_qmpphy_dp_in: endpoint { + remote-endpoint = <&mdss_dp0_out>; + }; + }; + }; + }; + + usb_1_ss1_hsphy: phy@fd9000 { + compatible = "qcom,x1e80100-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0 0x00fd9000 0 0x154>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + + status = "disabled"; + }; + + usb_1_ss1_qmpphy: phy@fda000 { + compatible = "qcom,x1e80100-qmp-usb3-dp-phy"; + reg = <0 0x00fda000 0 0x4000>; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; + + power-domains = <&gcc GCC_USB_1_PHY_GDSC>; + + resets = <&gcc GCC_USB3_PHY_SEC_BCR>, + <&gcc GCC_USB4_1_DP0_PHY_SEC_BCR>; + reset-names = "phy", + "common"; + + #clock-cells = <1>; + #phy-cells = <1>; + + mode-switch; + orientation-switch; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_ss1_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_ss1_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_ss1_dwc3_ss>; + }; + }; + + port@2 { + reg = <2>; + + usb_1_ss1_qmpphy_dp_in: endpoint { + remote-endpoint = <&mdss_dp1_out>; + }; + }; + }; + }; + + usb_1_ss2_hsphy: phy@fde000 { + compatible = "qcom,x1e80100-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0 0x00fde000 0 0x154>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB2_1_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_TERT_BCR>; + + status = "disabled"; + }; + + usb_1_ss2_qmpphy: phy@fdf000 { + compatible = "qcom,x1e80100-qmp-usb3-dp-phy"; + reg = <0 0x00fdf000 0 0x4000>; + + clocks = <&gcc GCC_USB3_TERT_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_TERT_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_TERT_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; + + power-domains = <&gcc GCC_USB_2_PHY_GDSC>; + + resets = <&gcc GCC_USB3_PHY_TERT_BCR>, + <&gcc GCC_USB4_2_DP0_PHY_TERT_BCR>; + reset-names = "phy", + "common"; + + #clock-cells = <1>; + #phy-cells = <1>; + + mode-switch; + orientation-switch; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_ss2_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_ss2_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_ss2_dwc3_ss>; + }; + }; + + port@2 { + reg = <2>; + + usb_1_ss2_qmpphy_dp_in: endpoint { + remote-endpoint = <&mdss_dp2_out>; + }; + }; + }; + }; + + cnoc_main: interconnect@1500000 { + compatible = "qcom,x1e80100-cnoc-main"; + reg = <0 0x01500000 0 0x14400>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + config_noc: interconnect@1600000 { + compatible = "qcom,x1e80100-cnoc-cfg"; + reg = <0 0x01600000 0 0x6600>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + system_noc: interconnect@1680000 { + compatible = "qcom,x1e80100-system-noc"; + reg = <0 0x01680000 0 0x1c080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + pcie_south_anoc: interconnect@16c0000 { + compatible = "qcom,x1e80100-pcie-south-anoc"; + reg = <0 0x016c0000 0 0xd080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + pcie_center_anoc: interconnect@16d0000 { + compatible = "qcom,x1e80100-pcie-center-anoc"; + reg = <0 0x016d0000 0 0x7000>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,x1e80100-aggre1-noc"; + reg = <0 0x016e0000 0 0x14400>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,x1e80100-aggre2-noc"; + reg = <0 0x01700000 0 0x1c400>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + pcie_north_anoc: interconnect@1740000 { + compatible = "qcom,x1e80100-pcie-north-anoc"; + reg = <0 0x01740000 0 0x9080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + usb_center_anoc: interconnect@1750000 { + compatible = "qcom,x1e80100-usb-center-anoc"; + reg = <0 0x01750000 0 0x8800>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + usb_north_anoc: interconnect@1760000 { + compatible = "qcom,x1e80100-usb-north-anoc"; + reg = <0 0x01760000 0 0x7080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + usb_south_anoc: interconnect@1770000 { + compatible = "qcom,x1e80100-usb-south-anoc"; + reg = <0 0x01770000 0 0xf080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + mmss_noc: interconnect@1780000 { + compatible = "qcom,x1e80100-mmss-noc"; + reg = <0 0x01780000 0 0x5B800>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + pcie3: pcie@1bd0000 { + device_type = "pci"; + compatible = "qcom,pcie-x1e80100"; + reg = <0x0 0x01bd0000 0x0 0x3000>, + <0x0 0x78000000 0x0 0xf20>, + <0x0 0x78000f40 0x0 0xa8>, + <0x0 0x78001000 0x0 0x1000>, + <0x0 0x78100000 0x0 0x100000>, + <0x0 0x01bd3000 0x0 0x1000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config", + "mhi"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x78200000 0x0 0x100000>, + <0x02000000 0x0 0x78300000 0x0 0x78300000 0x0 0x3d00000>, + <0x03000000 0x7 0x40000000 0x7 0x40000000 0x0 0x40000000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <3>; + num-lanes = <8>; + + interrupts = , + , + , + , + , + , + , + , + ; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_3_AUX_CLK>, + <&gcc GCC_PCIE_3_CFG_AHB_CLK>, + <&gcc GCC_PCIE_3_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_3_SLV_AXI_CLK>, + <&gcc GCC_PCIE_3_SLV_Q2A_AXI_CLK>, + <&gcc GCC_CFG_NOC_PCIE_ANOC_NORTH_AHB_CLK>, + <&gcc GCC_CNOC_PCIE_NORTH_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "noc_aggr", + "cnoc_sf_axi"; + + assigned-clocks = <&gcc GCC_PCIE_3_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&pcie_north_anoc MASTER_PCIE_3 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc_main SLAVE_PCIE_3 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "pcie-mem", + "cpu-pcie"; + + resets = <&gcc GCC_PCIE_3_BCR>, + <&gcc GCC_PCIE_3_LINK_DOWN_BCR>; + reset-names = "pci", + "link_down"; + + power-domains = <&gcc GCC_PCIE_3_GDSC>; + + phys = <&pcie3_phy>; + phy-names = "pciephy"; + + eq-presets-8gts = /bits/ 16 <0x5555 0x5555 0x5555 0x5555 + 0x5555 0x5555 0x5555 0x5555>; + eq-presets-16gts = /bits/ 8 <0x55 0x55 0x55 0x55 0x55 0x55 0x55 0x55>; + + operating-points-v2 = <&pcie3_opp_table>; + + status = "disabled"; + + pcie3_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* 2.5GT/s x1 */ + opp-2500000-1 { + opp-hz = /bits/ 64 <2500000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <250000 1>; + opp-level = <1>; + }; + + /* 2.5 GT/s x2 */ + opp-5000000-1 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + opp-level = <1>; + }; + + /* 2.5 GT/s x4 */ + opp-10000000-1 { + opp-hz = /bits/ 64 <10000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1000000 1>; + opp-level = <1>; + }; + + /* 2.5 GT/s x8 */ + opp-20000000-1 { + opp-hz = /bits/ 64 <20000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <2000000 1>; + opp-level = <1>; + }; + + /* 5 GT/s x1 */ + opp-5000000-2 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + opp-level = <2>; + }; + + /* 5 GT/s x2 */ + opp-10000000-2 { + opp-hz = /bits/ 64 <10000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1000000 1>; + opp-level = <2>; + }; + + /* 5 GT/s x4 */ + opp-20000000-2 { + opp-hz = /bits/ 64 <20000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <2000000 1>; + opp-level = <2>; + }; + + /* 5 GT/s x8 */ + opp-40000000-2 { + opp-hz = /bits/ 64 <40000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <4000000 1>; + opp-level = <2>; + }; + + /* 8 GT/s x1 */ + opp-8000000-3 { + opp-hz = /bits/ 64 <8000000>; + required-opps = <&rpmhpd_opp_svs>; + opp-peak-kBps = <984500 1>; + opp-level = <3>; + }; + + /* 8 GT/s x2 */ + opp-16000000-3 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_svs>; + opp-peak-kBps = <1969000 1>; + opp-level = <3>; + }; + + /* 8 GT/s x4 */ + opp-32000000-3 { + opp-hz = /bits/ 64 <32000000>; + required-opps = <&rpmhpd_opp_svs>; + opp-peak-kBps = <3938000 1>; + opp-level = <3>; + }; + + /* 8 GT/s x8 */ + opp-64000000-3 { + opp-hz = /bits/ 64 <64000000>; + required-opps = <&rpmhpd_opp_svs>; + opp-peak-kBps = <7876000 1>; + opp-level = <3>; + }; + + /* 16 GT/s x1 */ + opp-16000000-4 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_svs>; + opp-peak-kBps = <1969000 1>; + opp-level = <4>; + }; + + /* 16 GT/s x2 */ + opp-32000000-4 { + opp-hz = /bits/ 64 <32000000>; + required-opps = <&rpmhpd_opp_svs>; + opp-peak-kBps = <3938000 1>; + opp-level = <4>; + }; + + /* 16 GT/s x4 */ + opp-64000000-4 { + opp-hz = /bits/ 64 <64000000>; + required-opps = <&rpmhpd_opp_svs>; + opp-peak-kBps = <7876000 1>; + opp-level = <4>; + }; + + /* 16 GT/s x8 */ + opp-128000000-4 { + opp-hz = /bits/ 64 <128000000>; + required-opps = <&rpmhpd_opp_svs>; + opp-peak-kBps = <15753000 1>; + opp-level = <4>; + }; + }; + + pcie3_port: pcie@0 { + device_type = "pci"; + compatible = "pciclass,0604"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + }; + + pcie3_phy: phy@1be0000 { + compatible = "qcom,x1e80100-qmp-gen4x8-pcie-phy"; + reg = <0 0x01be0000 0 0x10000>; + + clocks = <&gcc GCC_PCIE_3_PHY_AUX_CLK>, + <&gcc GCC_PCIE_3_CFG_AHB_CLK>, + <&tcsr TCSR_PCIE_8L_CLKREF_EN>, + <&gcc GCC_PCIE_3_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_3_PIPE_CLK>, + <&gcc GCC_PCIE_3_PIPEDIV2_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe", + "pipediv2"; + + resets = <&gcc GCC_PCIE_3_PHY_BCR>, + <&gcc GCC_PCIE_3_NOCSR_COM_PHY_BCR>; + reset-names = "phy", + "phy_nocsr"; + + assigned-clocks = <&gcc GCC_PCIE_3_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc GCC_PCIE_3_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie3_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie6a: pci@1bf8000 { + device_type = "pci"; + compatible = "qcom,pcie-x1e80100"; + reg = <0 0x01bf8000 0 0x3000>, + <0 0x70000000 0 0xf20>, + <0 0x70000f40 0 0xa8>, + <0 0x70001000 0 0x1000>, + <0 0x70100000 0 0x100000>, + <0 0x01bfb000 0 0x1000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config", + "mhi"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x70200000 0x0 0x100000>, + <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x3d00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <6>; + num-lanes = <4>; + + msi-map = <0x0 &gic_its 0xe0000 0x10000>; + + interrupts = , + , + , + , + , + , + , + , + ; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 843 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 845 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_6A_AUX_CLK>, + <&gcc GCC_PCIE_6A_CFG_AHB_CLK>, + <&gcc GCC_PCIE_6A_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_6A_SLV_AXI_CLK>, + <&gcc GCC_PCIE_6A_SLV_Q2A_AXI_CLK>, + <&gcc GCC_CFG_NOC_PCIE_ANOC_SOUTH_AHB_CLK>, + <&gcc GCC_CNOC_PCIE_SOUTH_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "noc_aggr", + "cnoc_sf_axi"; + + assigned-clocks = <&gcc GCC_PCIE_6A_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&pcie_south_anoc MASTER_PCIE_6A QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc_main SLAVE_PCIE_6A QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "pcie-mem", + "cpu-pcie"; + + resets = <&gcc GCC_PCIE_6A_BCR>, + <&gcc GCC_PCIE_6A_LINK_DOWN_BCR>; + reset-names = "pci", + "link_down"; + + power-domains = <&gcc GCC_PCIE_6A_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + phys = <&pcie6a_phy>; + phy-names = "pciephy"; + + eq-presets-8gts = /bits/ 16 <0x5555 0x5555 0x5555 0x5555>; + eq-presets-16gts = /bits/ 8 <0x55 0x55 0x55 0x55>; + + status = "disabled"; + }; + + pcie6a_phy: phy@1bfc000 { + compatible = "qcom,x1e80100-qmp-gen4x4-pcie-phy"; + reg = <0 0x01bfc000 0 0x2000>, + <0 0x01bfe000 0 0x2000>; + + clocks = <&gcc GCC_PCIE_6A_PHY_AUX_CLK>, + <&gcc GCC_PCIE_6A_CFG_AHB_CLK>, + <&tcsr TCSR_PCIE_4L_CLKREF_EN>, + <&gcc GCC_PCIE_6A_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_6A_PIPE_CLK>, + <&gcc GCC_PCIE_6A_PIPEDIV2_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe", + "pipediv2"; + + resets = <&gcc GCC_PCIE_6A_PHY_BCR>, + <&gcc GCC_PCIE_6A_NOCSR_COM_PHY_BCR>; + reset-names = "phy", + "phy_nocsr"; + + assigned-clocks = <&gcc GCC_PCIE_6A_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc GCC_PCIE_6_PHY_GDSC>; + + qcom,4ln-config-sel = <&tcsr 0x1a000 0>; + + #clock-cells = <0>; + clock-output-names = "pcie6a_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie5: pci@1c00000 { + device_type = "pci"; + compatible = "qcom,pcie-x1e80100"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x7e000000 0 0xf1d>, + <0 0x7e000f40 0 0xa8>, + <0 0x7e001000 0 0x1000>, + <0 0x7e100000 0 0x100000>, + <0 0x01c03000 0 0x1000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config", + "mhi"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x7e200000 0x0 0x100000>, + <0x02000000 0x0 0x7e300000 0x0 0x7e300000 0x0 0x1d00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <5>; + num-lanes = <2>; + + interrupts = , + , + , + , + , + , + , + , + ; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_5_AUX_CLK>, + <&gcc GCC_PCIE_5_CFG_AHB_CLK>, + <&gcc GCC_PCIE_5_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_5_SLV_AXI_CLK>, + <&gcc GCC_PCIE_5_SLV_Q2A_AXI_CLK>, + <&gcc GCC_CFG_NOC_PCIE_ANOC_NORTH_AHB_CLK>, + <&gcc GCC_CNOC_PCIE_NORTH_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "noc_aggr", + "cnoc_sf_axi"; + + assigned-clocks = <&gcc GCC_PCIE_5_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&pcie_north_anoc MASTER_PCIE_5 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc_main SLAVE_PCIE_5 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "pcie-mem", + "cpu-pcie"; + + resets = <&gcc GCC_PCIE_5_BCR>, + <&gcc GCC_PCIE_5_LINK_DOWN_BCR>; + reset-names = "pci", + "link_down"; + + power-domains = <&gcc GCC_PCIE_5_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + phys = <&pcie5_phy>; + phy-names = "pciephy"; + + eq-presets-8gts = /bits/ 16 <0x5555 0x5555>; + + status = "disabled"; + }; + + pcie5_phy: phy@1c06000 { + compatible = "qcom,x1e80100-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c06000 0 0x2000>; + + clocks = <&gcc GCC_PCIE_5_AUX_CLK>, + <&gcc GCC_PCIE_5_CFG_AHB_CLK>, + <&tcsr TCSR_PCIE_2L_5_CLKREF_EN>, + <&gcc GCC_PCIE_5_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_5_PIPE_CLK>, + <&gcc GCC_PCIE_5_PIPEDIV2_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe", + "pipediv2"; + + resets = <&gcc GCC_PCIE_5_PHY_BCR>, + <&gcc GCC_PCIE_5_NOCSR_COM_PHY_BCR>; + reset-names = "phy", + "phy_nocsr"; + + assigned-clocks = <&gcc GCC_PCIE_5_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc GCC_PCIE_5_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie5_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie4: pci@1c08000 { + device_type = "pci"; + compatible = "qcom,pcie-x1e80100"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x7c000000 0 0xf1d>, + <0 0x7c000f40 0 0xa8>, + <0 0x7c001000 0 0x1000>, + <0 0x7c100000 0 0x100000>, + <0 0x01c0b000 0 0x1000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config", + "mhi"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x7c200000 0x0 0x100000>, + <0x02000000 0x0 0x7c300000 0x0 0x7c300000 0x0 0x1d00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <4>; + num-lanes = <2>; + + msi-map = <0x0 &gic_its 0xc0000 0x10000>; + + interrupts = , + , + , + , + , + , + , + , + ; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_4_AUX_CLK>, + <&gcc GCC_PCIE_4_CFG_AHB_CLK>, + <&gcc GCC_PCIE_4_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_4_SLV_AXI_CLK>, + <&gcc GCC_PCIE_4_SLV_Q2A_AXI_CLK>, + <&gcc GCC_CFG_NOC_PCIE_ANOC_NORTH_AHB_CLK>, + <&gcc GCC_CNOC_PCIE_NORTH_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "noc_aggr", + "cnoc_sf_axi"; + + assigned-clocks = <&gcc GCC_PCIE_4_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&pcie_north_anoc MASTER_PCIE_4 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc_main SLAVE_PCIE_4 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "pcie-mem", + "cpu-pcie"; + + resets = <&gcc GCC_PCIE_4_BCR>, + <&gcc GCC_PCIE_4_LINK_DOWN_BCR>; + reset-names = "pci", + "link_down"; + + power-domains = <&gcc GCC_PCIE_4_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + phys = <&pcie4_phy>; + phy-names = "pciephy"; + + eq-presets-8gts = /bits/ 16 <0x5555 0x5555>; + + status = "disabled"; + + pcie4_port0: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + }; + + pcie4_phy: phy@1c0e000 { + compatible = "qcom,x1e80100-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c0e000 0 0x2000>; + + clocks = <&gcc GCC_PCIE_4_AUX_CLK>, + <&gcc GCC_PCIE_4_CFG_AHB_CLK>, + <&tcsr TCSR_PCIE_2L_4_CLKREF_EN>, + <&gcc GCC_PCIE_4_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_4_PIPE_CLK>, + <&gcc GCC_PCIE_4_PIPEDIV2_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe", + "pipediv2"; + + resets = <&gcc GCC_PCIE_4_PHY_BCR>, + <&gcc GCC_PCIE_4_NOCSR_COM_PHY_BCR>; + reset-names = "phy", + "phy_nocsr"; + + assigned-clocks = <&gcc GCC_PCIE_4_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc GCC_PCIE_4_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie4_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0 0x01f40000 0 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: clock-controller@1fc0000 { + compatible = "qcom,x1e80100-tcsr", "syscon"; + reg = <0 0x01fc0000 0 0x30000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + gpu: gpu@3d00000 { + compatible = "qcom,adreno-43050c01", "qcom,adreno"; + reg = <0x0 0x03d00000 0x0 0x40000>, + <0x0 0x03d9e000 0x0 0x1000>, + <0x0 0x03d61000 0x0 0x800>; + + reg-names = "kgsl_3d0_reg_memory", + "cx_mem", + "cx_dbgc"; + + interrupts = ; + + iommus = <&adreno_smmu 0 0x0>, + <&adreno_smmu 1 0x0>; + + operating-points-v2 = <&gpu_opp_table>; + + qcom,gmu = <&gmu>; + #cooling-cells = <2>; + + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + + interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "gfx-mem"; + + status = "disabled"; + + gpu_zap_shader: zap-shader { + memory-region = <&gpu_microcode_mem>; + }; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2-adreno", "operating-points-v2"; + + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-level = ; + opp-peak-kBps = <16500000>; + qcom,opp-acd-level = <0xa82a5ffd>; + opp-supported-hw = <0x03>; + }; + + opp-1375000000 { + opp-hz = /bits/ 64 <1375000000>; + opp-level = ; + opp-peak-kBps = <16500000>; + qcom,opp-acd-level = <0xa82a5ffd>; + opp-supported-hw = <0x03>; + }; + + opp-1250000000 { + opp-hz = /bits/ 64 <1250000000>; + opp-level = ; + opp-peak-kBps = <16500000>; + qcom,opp-acd-level = <0xa82a5ffd>; + opp-supported-hw = <0x07>; + }; + + opp-1175000000 { + opp-hz = /bits/ 64 <1175000000>; + opp-level = ; + opp-peak-kBps = <14398438>; + qcom,opp-acd-level = <0xa82a5ffd>; + opp-supported-hw = <0x07>; + }; + + opp-1100000000-0 { + opp-hz = /bits/ 64 <1100000000>; + opp-level = ; + opp-peak-kBps = <14398438>; + qcom,opp-acd-level = <0xa82a5ffd>; + opp-supported-hw = <0x07>; + }; + + /* Only applicable for SKUs which has 1100Mhz as Fmax */ + opp-1100000000-1 { + opp-hz = /bits/ 64 <1100000000>; + opp-level = ; + opp-peak-kBps = <16500000>; + qcom,opp-acd-level = <0xa82a5ffd>; + opp-supported-hw = <0x08>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-level = ; + opp-peak-kBps = <14398438>; + qcom,opp-acd-level = <0xa82b5ffd>; + opp-supported-hw = <0x0f>; + }; + + opp-925000000 { + opp-hz = /bits/ 64 <925000000>; + opp-level = ; + opp-peak-kBps = <14398438>; + qcom,opp-acd-level = <0xa82b5ffd>; + opp-supported-hw = <0x0f>; + }; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-level = ; + opp-peak-kBps = <12449219>; + qcom,opp-acd-level = <0xa82c5ffd>; + opp-supported-hw = <0x0f>; + }; + + opp-744000000 { + opp-hz = /bits/ 64 <744000000>; + opp-level = ; + opp-peak-kBps = <10687500>; + qcom,opp-acd-level = <0x882e5ffd>; + opp-supported-hw = <0x0f>; + }; + + opp-687000000-0 { + opp-hz = /bits/ 64 <687000000>; + opp-level = ; + opp-peak-kBps = <8171875>; + qcom,opp-acd-level = <0x882e5ffd>; + opp-supported-hw = <0x0f>; + }; + + /* Only applicable for SKUs which has 687Mhz as Fmax */ + opp-687000000-1 { + opp-hz = /bits/ 64 <687000000>; + opp-level = ; + opp-peak-kBps = <16500000>; + qcom,opp-acd-level = <0x882e5ffd>; + opp-supported-hw = <0x10>; + }; + + opp-550000000 { + opp-hz = /bits/ 64 <550000000>; + opp-level = ; + opp-peak-kBps = <6074219>; + qcom,opp-acd-level = <0xc0285ffd>; + opp-supported-hw = <0x1f>; + }; + + opp-390000000 { + opp-hz = /bits/ 64 <390000000>; + opp-level = ; + opp-peak-kBps = <3000000>; + qcom,opp-acd-level = <0xc0285ffd>; + opp-supported-hw = <0x1f>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-level = ; + opp-peak-kBps = <2136719>; + qcom,opp-acd-level = <0xc02b5ffd>; + opp-supported-hw = <0x1f>; + }; + }; + }; + + gmu: gmu@3d6a000 { + compatible = "qcom,adreno-gmu-x185.1", "qcom,adreno-gmu"; + reg = <0x0 0x03d6a000 0x0 0x35000>, + <0x0 0x03d50000 0x0 0x10000>, + <0x0 0x0b280000 0x0 0x10000>; + reg-names = "gmu", "rscc", "gmu_pdc"; + + interrupts = , + ; + interrupt-names = "hfi", "gmu"; + + clocks = <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_DEMET_CLK>; + clock-names = "ahb", + "gmu", + "cxo", + "axi", + "memnoc", + "hub", + "demet"; + + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", + "gx"; + + iommus = <&adreno_smmu 5 0x0>; + + qcom,qmp = <&aoss_qmp>; + + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-550000000 { + opp-hz = /bits/ 64 <550000000>; + opp-level = ; + }; + + opp-220000000 { + opp-hz = /bits/ 64 <220000000>; + opp-level = ; + }; + }; + }; + + gpucc: clock-controller@3d90000 { + compatible = "qcom,x1e80100-gpucc"; + reg = <0 0x03d90000 0 0xa000>; + clocks = <&bi_tcxo_div2>, + <&gcc GCC_GPU_GPLL0_CPH_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CPH_CLK_SRC>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@3da0000 { + compatible = "qcom,x1e80100-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x03da0000 0x0 0x40000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>; + clock-names = "hlos", + "bus", + "iface", + "ahb"; + power-domains = <&gpucc GPU_CX_GDSC>; + dma-coherent; + }; + + gem_noc: interconnect@26400000 { + compatible = "qcom,x1e80100-gem-noc"; + reg = <0 0x26400000 0 0x311200>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + nsp_noc: interconnect@320c0000 { + compatible = "qcom,x1e80100-nsp-noc"; + reg = <0 0x320C0000 0 0xe080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + remoteproc_adsp: remoteproc@6800000 { + compatible = "qcom,x1e80100-adsp-pas"; + reg = <0x0 0x06800000 0x0 0x10000>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_LCX>, + <&rpmhpd RPMHPD_LMX>; + power-domain-names = "lcx", + "lmx"; + + interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + + memory-region = <&adspslpi_mem>, + <&q6_adsp_dtb_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1003 0x80>, + <&apps_smmu 0x1063 0x0>; + dma-coherent; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1004 0x80>, + <&apps_smmu 0x1064 0x0>; + dma-coherent; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1005 0x80>, + <&apps_smmu 0x1065 0x0>; + dma-coherent; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x1006 0x80>, + <&apps_smmu 0x1066 0x0>; + dma-coherent; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x1007 0x80>, + <&apps_smmu 0x1067 0x0>; + dma-coherent; + }; + }; + + gpr { + compatible = "qcom,gpr"; + qcom,glink-channels = "adsp_apps"; + qcom,domain = ; + qcom,intents = <512 20>; + #address-cells = <1>; + #size-cells = <0>; + + q6apm: service@1 { + compatible = "qcom,q6apm"; + reg = ; + #sound-dai-cells = <0>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6apmbedai: bedais { + compatible = "qcom,q6apm-lpass-dais"; + #sound-dai-cells = <1>; + }; + + q6apmdai: dais { + compatible = "qcom,q6apm-dais"; + iommus = <&apps_smmu 0x1001 0x80>, + <&apps_smmu 0x1061 0x0>; + }; + }; + + q6prm: service@2 { + compatible = "qcom,q6prm"; + reg = ; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6prmcc: clock-controller { + compatible = "qcom,q6prm-lpass-clocks"; + #clock-cells = <2>; + }; + }; + }; + }; + }; + + lpass_wsa2macro: codec@6aa0000 { + compatible = "qcom,x1e80100-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro"; + reg = <0 0x06aa0000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", + "macro", + "dcodec", + "fsgen"; + + #clock-cells = <0>; + clock-output-names = "wsa2-mclk"; + #sound-dai-cells = <1>; + sound-name-prefix = "WSA2"; + }; + + swr3: soundwire@6ab0000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06ab0000 0 0x10000>; + clocks = <&lpass_wsa2macro>; + clock-names = "iface"; + interrupts = ; + label = "WSA2"; + + pinctrl-0 = <&wsa2_swr_active>; + pinctrl-names = "default"; + resets = <&lpass_audiocc LPASS_AUDIO_SWR_WSA2_CGCR>; + reset-names = "swr_audio_cgcr"; + + qcom,din-ports = <4>; + qcom,dout-ports = <9>; + + qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0xc8 0xff 0xff 0x0f 0x0f 0xff 0x31f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>; + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_rxmacro: codec@6ac0000 { + compatible = "qcom,x1e80100-lpass-rx-macro", "qcom,sm8550-lpass-rx-macro"; + reg = <0 0x06ac0000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", + "macro", + "dcodec", + "fsgen"; + + #clock-cells = <0>; + clock-output-names = "mclk"; + #sound-dai-cells = <1>; + }; + + swr1: soundwire@6ad0000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06ad0000 0 0x10000>; + clocks = <&lpass_rxmacro>; + clock-names = "iface"; + interrupts = ; + label = "RX"; + + pinctrl-0 = <&rx_swr_active>; + pinctrl-names = "default"; + + resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>; + reset-names = "swr_audio_cgcr"; + qcom,din-ports = <1>; + qcom,dout-ports = <11>; + + qcom,ports-sinterval = /bits/ 16 <0x03 0x1f 0x1f 0x07 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0x0f 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0x01 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_txmacro: codec@6ae0000 { + compatible = "qcom,x1e80100-lpass-tx-macro", "qcom,sm8550-lpass-tx-macro"; + reg = <0 0x06ae0000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", + "macro", + "dcodec", + "fsgen"; + + #clock-cells = <0>; + clock-output-names = "mclk"; + #sound-dai-cells = <1>; + }; + + lpass_wsamacro: codec@6b00000 { + compatible = "qcom,x1e80100-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro"; + reg = <0 0x06b00000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", + "macro", + "dcodec", + "fsgen"; + + #clock-cells = <0>; + clock-output-names = "mclk"; + #sound-dai-cells = <1>; + sound-name-prefix = "WSA"; + }; + + swr0: soundwire@6b10000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06b10000 0 0x10000>; + clocks = <&lpass_wsamacro>; + clock-names = "iface"; + interrupts = ; + label = "WSA"; + + pinctrl-0 = <&wsa_swr_active>; + pinctrl-names = "default"; + resets = <&lpass_audiocc LPASS_AUDIO_SWR_WSA_CGCR>; + reset-names = "swr_audio_cgcr"; + + qcom,din-ports = <4>; + qcom,dout-ports = <9>; + + qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0xc8 0xff 0xff 0x0f 0x0f 0xff 0x31f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>; + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_audiocc: clock-controller@6b6c000 { + compatible = "qcom,x1e80100-lpassaudiocc", "qcom,sc8280xp-lpassaudiocc"; + reg = <0 0x06b6c000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + swr2: soundwire@6d30000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06d30000 0 0x10000>; + clocks = <&lpass_txmacro>; + clock-names = "iface"; + interrupts = , + ; + interrupt-names = "core", "wakeup"; + label = "TX"; + resets = <&lpasscc LPASS_AUDIO_SWR_TX_CGCR>; + reset-names = "swr_audio_cgcr"; + + pinctrl-0 = <&tx_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <4>; + qcom,dout-ports = <1>; + + qcom,ports-sinterval-low = /bits/ 8 <0x00 0x01 0x03 0x03 0x00>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x01 0x02 0x00 0x00>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0x00 0x00 0x01 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_vamacro: codec@6d44000 { + compatible = "qcom,x1e80100-lpass-va-macro", "qcom,sm8550-lpass-va-macro"; + reg = <0 0x06d44000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "mclk", + "macro", + "dcodec"; + + #clock-cells = <0>; + clock-output-names = "fsgen"; + #sound-dai-cells = <1>; + }; + + lpass_tlmm: pinctrl@6e80000 { + compatible = "qcom,x1e80100-lpass-lpi-pinctrl", "qcom,sm8550-lpass-lpi-pinctrl"; + reg = <0 0x06e80000 0 0x20000>, + <0 0x07250000 0 0x10000>; + + clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 23>; + + tx_swr_active: tx-swr-active-state { + clk-pins { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio1", "gpio2"; + function = "swr_tx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + rx_swr_active: rx-swr-active-state { + clk-pins { + pins = "gpio3"; + function = "swr_rx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio4", "gpio5"; + function = "swr_rx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + dmic01_default: dmic01-default-state { + clk-pins { + pins = "gpio6"; + function = "dmic1_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio7"; + function = "dmic1_data"; + drive-strength = <8>; + input-enable; + }; + }; + + dmic23_default: dmic23-default-state { + clk-pins { + pins = "gpio8"; + function = "dmic2_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio9"; + function = "dmic2_data"; + drive-strength = <8>; + input-enable; + }; + }; + + wsa_swr_active: wsa-swr-active-state { + clk-pins { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + wsa2_swr_active: wsa2-swr-active-state { + clk-pins { + pins = "gpio15"; + function = "wsa2_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio16"; + function = "wsa2_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + }; + + lpasscc: clock-controller@6ea0000 { + compatible = "qcom,x1e80100-lpasscc", "qcom,sc8280xp-lpasscc"; + reg = <0 0x06ea0000 0 0x12000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + lpass_ag_noc: interconnect@7e40000 { + compatible = "qcom,x1e80100-lpass-ag-noc"; + reg = <0 0x07e40000 0 0xe080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + lpass_lpiaon_noc: interconnect@7400000 { + compatible = "qcom,x1e80100-lpass-lpiaon-noc"; + reg = <0 0x07400000 0 0x19080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + lpass_lpicx_noc: interconnect@7430000 { + compatible = "qcom,x1e80100-lpass-lpicx-noc"; + reg = <0 0x07430000 0 0x3A200>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + sdhc_2: mmc@8804000 { + compatible = "qcom,x1e80100-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + iommus = <&apps_smmu 0x520 0>; + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + + interconnects = <&aggre2_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "sdhc-ddr", "cpu-sdhc"; + bus-width = <4>; + dma-coherent; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + sdhc_4: mmc@8844000 { + compatible = "qcom,x1e80100-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08844000 0 0x1000>; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC4_AHB_CLK>, + <&gcc GCC_SDCC4_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + iommus = <&apps_smmu 0x160 0>; + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&sdhc4_opp_table>; + + interconnects = <&aggre2_noc MASTER_SDCC_4 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_SDCC_4 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "sdhc-ddr", "cpu-sdhc"; + bus-width = <4>; + dma-coherent; + + status = "disabled"; + + sdhc4_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + usb_2_hsphy: phy@88e0000 { + compatible = "qcom,x1e80100-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0 0x088e0000 0 0x154>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB2_2_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_USB20_HS_BCR>; + + status = "disabled"; + }; + + usb_mp_hsphy0: phy@88e1000 { + compatible = "qcom,x1e80100-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0 0x088e1000 0 0x154>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB3_MP0_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_HS0_MP_BCR>; + + status = "disabled"; + }; + + usb_mp_hsphy1: phy@88e2000 { + compatible = "qcom,x1e80100-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0 0x088e2000 0 0x154>; + #phy-cells = <0>; + + clocks = <&tcsr TCSR_USB3_MP1_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_HS1_MP_BCR>; + + status = "disabled"; + }; + + usb_mp_qmpphy0: phy@88e3000 { + compatible = "qcom,x1e80100-qmp-usb3-uni-phy"; + reg = <0 0x088e3000 0 0x2000>; + + clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "pipe"; + + resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>, + <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>; + reset-names = "phy", + "phy_phy"; + + power-domains = <&gcc GCC_USB3_MP_SS0_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "usb_mp_phy0_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_mp_qmpphy1: phy@88e5000 { + compatible = "qcom,x1e80100-qmp-usb3-uni-phy"; + reg = <0 0x088e5000 0 0x2000>; + + clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "pipe"; + + resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>, + <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>; + reset-names = "phy", + "phy_phy"; + + power-domains = <&gcc GCC_USB3_MP_SS1_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "usb_mp_phy1_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_1_ss2: usb@a0f8800 { + compatible = "qcom,x1e80100-dwc3", "qcom,dwc3"; + reg = <0 0x0a0f8800 0 0x400>; + + clocks = <&gcc GCC_CFG_NOC_USB3_TERT_AXI_CLK>, + <&gcc GCC_USB30_TERT_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_TERT_AXI_CLK>, + <&gcc GCC_USB30_TERT_SLEEP_CLK>, + <&gcc GCC_USB30_TERT_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_NORTH_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_SOUTH_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "noc_aggr", + "noc_aggr_north", + "noc_aggr_south", + "noc_sys"; + + assigned-clocks = <&gcc GCC_USB30_TERT_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_TERT_MASTER_CLK>; + assigned-clock-rates = <19200000>, + <200000000>; + + interrupts-extended = <&intc GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 58 IRQ_TYPE_EDGE_BOTH>, + <&pdc 57 IRQ_TYPE_EDGE_BOTH>, + <&pdc 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc GCC_USB30_TERT_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_TERT_BCR>; + + interconnects = <&usb_south_anoc MASTER_USB3_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_USB3_2 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "usb-ddr", + "apps-usb"; + + wakeup-source; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_1_ss2_dwc3: usb@a000000 { + compatible = "snps,dwc3"; + reg = <0 0x0a000000 0 0xcd00>; + + interrupts = ; + + iommus = <&apps_smmu 0x14a0 0x0>; + + phys = <&usb_1_ss2_hsphy>, + <&usb_1_ss2_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", + "usb3-phy"; + + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,usb3_lpm_capable; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + + dma-coherent; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_ss2_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_ss2_dwc3_ss: endpoint { + remote-endpoint = <&usb_1_ss2_qmpphy_usb_ss_in>; + }; + }; + }; + }; + }; + + usb_2: usb@a2f8800 { + compatible = "qcom,x1e80100-dwc3", "qcom,dwc3"; + reg = <0 0x0a2f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>, + <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>, + <&gcc GCC_USB20_SLEEP_CLK>, + <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_NORTH_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_SOUTH_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "noc_aggr", + "noc_aggr_north", + "noc_aggr_south", + "noc_sys"; + + assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 50 IRQ_TYPE_EDGE_BOTH>, + <&pdc 49 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq"; + + power-domains = <&gcc GCC_USB20_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB20_PRIM_BCR>; + + interconnects = <&usb_north_anoc MASTER_USB2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_USB2 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "usb-ddr", + "apps-usb"; + + qcom,select-utmi-as-pipe-clk; + wakeup-source; + + status = "disabled"; + + usb_2_dwc3: usb@a200000 { + compatible = "snps,dwc3"; + reg = <0 0x0a200000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x14e0 0x0>; + phys = <&usb_2_hsphy>; + phy-names = "usb2-phy"; + maximum-speed = "high-speed"; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + + dma-coherent; + + port { + usb_2_dwc3_hs: endpoint { + }; + }; + }; + }; + + usb_mp: usb@a4f8800 { + compatible = "qcom,x1e80100-dwc3-mp", "qcom,dwc3"; + reg = <0 0x0a4f8800 0 0x400>; + + clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>, + <&gcc GCC_USB30_MP_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_MP_AXI_CLK>, + <&gcc GCC_USB30_MP_SLEEP_CLK>, + <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_NORTH_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_SOUTH_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "noc_aggr", + "noc_aggr_north", + "noc_aggr_south", + "noc_sys"; + + assigned-clocks = <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MP_MASTER_CLK>; + assigned-clock-rates = <19200000>, + <200000000>; + + interrupts-extended = <&intc GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 52 IRQ_TYPE_EDGE_BOTH>, + <&pdc 51 IRQ_TYPE_EDGE_BOTH>, + <&pdc 54 IRQ_TYPE_EDGE_BOTH>, + <&pdc 53 IRQ_TYPE_EDGE_BOTH>, + <&pdc 55 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 56 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event_1", "pwr_event_2", + "hs_phy_1", "hs_phy_2", + "dp_hs_phy_1", "dm_hs_phy_1", + "dp_hs_phy_2", "dm_hs_phy_2", + "ss_phy_1", "ss_phy_2"; + + power-domains = <&gcc GCC_USB30_MP_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_MP_BCR>; + + interconnects = <&usb_north_anoc MASTER_USB3_MP QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_USB3_MP QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "usb-ddr", + "apps-usb"; + + wakeup-source; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_mp_dwc3: usb@a400000 { + compatible = "snps,dwc3"; + reg = <0 0x0a400000 0 0xcd00>; + + interrupts = ; + + iommus = <&apps_smmu 0x1400 0x0>; + + phys = <&usb_mp_hsphy0>, <&usb_mp_qmpphy0>, + <&usb_mp_hsphy1>, <&usb_mp_qmpphy1>; + phy-names = "usb2-0", "usb3-0", + "usb2-1", "usb3-1"; + dr_mode = "host"; + + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,usb3_lpm_capable; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + + dma-coherent; + }; + }; + + usb_1_ss0: usb@a6f8800 { + compatible = "qcom,x1e80100-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_CFG_NOC_USB_ANOC_NORTH_AHB_CLK>, + <&gcc GCC_CFG_NOC_USB_ANOC_SOUTH_AHB_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "noc_aggr", + "noc_aggr_north", + "noc_aggr_south", + "noc_sys"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, + <200000000>; + + interrupts-extended = <&intc GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 61 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + wakeup-source; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_1_ss0_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + + interrupts = ; + + iommus = <&apps_smmu 0x1420 0x0>; + + phys = <&usb_1_ss0_hsphy>, + <&usb_1_ss0_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", + "usb3-phy"; + + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,usb3_lpm_capable; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + + dma-coherent; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_ss0_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_ss0_dwc3_ss: endpoint { + remote-endpoint = <&usb_1_ss0_qmpphy_usb_ss_in>; + }; + }; + }; + }; + }; + + usb_1_ss1: usb@a8f8800 { + compatible = "qcom,x1e80100-dwc3", "qcom,dwc3"; + reg = <0 0x0a8f8800 0 0x400>; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_NORTH_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_USB_SOUTH_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "noc_aggr", + "noc_aggr_north", + "noc_aggr_south", + "noc_sys"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, + <200000000>; + + interrupts-extended = <&intc GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 60 IRQ_TYPE_EDGE_BOTH>, + <&pdc 11 IRQ_TYPE_EDGE_BOTH>, + <&pdc 47 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc GCC_USB30_SEC_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + interconnects = <&usb_south_anoc MASTER_USB3_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_USB3_1 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "usb-ddr", + "apps-usb"; + + wakeup-source; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_1_ss1_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0 0x0a800000 0 0xcd00>; + + interrupts = ; + + iommus = <&apps_smmu 0x1460 0x0>; + + phys = <&usb_1_ss1_hsphy>, + <&usb_1_ss1_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", + "usb3-phy"; + + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,usb3_lpm_capable; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + + dma-coherent; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_ss1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_ss1_dwc3_ss: endpoint { + remote-endpoint = <&usb_1_ss1_qmpphy_usb_ss_in>; + }; + }; + }; + }; + }; + + iris: video-codec@aa00000 { + compatible = "qcom,x1e80100-iris", "qcom,sm8550-iris"; + + reg = <0 0x0aa00000 0 0xf0000>; + interrupts = ; + + power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>, + <&videocc VIDEO_CC_MVS0_GDSC>, + <&rpmhpd RPMHPD_MXC>, + <&rpmhpd RPMHPD_MMCX>; + power-domain-names = "venus", + "vcodec0", + "mxc", + "mmcx"; + operating-points-v2 = <&iris_opp_table>; + + clocks = <&gcc GCC_VIDEO_AXI0_CLK>, + <&videocc VIDEO_CC_MVS0C_CLK>, + <&videocc VIDEO_CC_MVS0_CLK>; + clock-names = "iface", + "core", + "vcodec0_core"; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>, + <&mmss_noc MASTER_VIDEO QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "cpu-cfg", + "video-mem"; + + memory-region = <&video_mem>; + + resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>; + reset-names = "bus"; + + iommus = <&apps_smmu 0x1940 0>, + <&apps_smmu 0x1947 0>; + dma-coherent; + + /* + * IRIS firmware is signed by vendors, only + * enable on boards where the proper signed firmware + * is available. + */ + status = "disabled"; + + iris_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmhpd_opp_low_svs_d1>, + <&rpmhpd_opp_low_svs_d1>; + }; + + opp-240000000 { + opp-hz = /bits/ 64 <240000000>; + required-opps = <&rpmhpd_opp_svs>, + <&rpmhpd_opp_low_svs>; + }; + + opp-338000000 { + opp-hz = /bits/ 64 <338000000>; + required-opps = <&rpmhpd_opp_svs>, + <&rpmhpd_opp_svs>; + }; + + opp-366000000 { + opp-hz = /bits/ 64 <366000000>; + required-opps = <&rpmhpd_opp_svs_l1>, + <&rpmhpd_opp_svs_l1>; + }; + + opp-444000000 { + opp-hz = /bits/ 64 <444000000>; + required-opps = <&rpmhpd_opp_nom>, + <&rpmhpd_opp_nom>; + }; + + opp-481000000 { + opp-hz = /bits/ 64 <481000000>; + required-opps = <&rpmhpd_opp_turbo>, + <&rpmhpd_opp_turbo>; + }; + }; + }; + + videocc: clock-controller@aaf0000 { + compatible = "qcom,x1e80100-videocc"; + reg = <0 0x0aaf0000 0 0x10000>; + clocks = <&bi_tcxo_div2>, + <&gcc GCC_VIDEO_AHB_CLK>; + power-domains = <&rpmhpd RPMHPD_MMCX>, + <&rpmhpd RPMHPD_MXC>; + required-opps = <&rpmhpd_opp_low_svs>, + <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + mdss: display-subsystem@ae00000 { + compatible = "qcom,x1e80100-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + interrupts = ; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>, + <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", + "mdp1-mem", + "cpu-cfg"; + + power-domains = <&dispcc MDSS_GDSC>; + + iommus = <&apps_smmu 0x1c00 0x2>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,x1e80100-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", + "vbif"; + + interrupts-extended = <&mdss 0>; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_intf0_out: endpoint { + remote-endpoint = <&mdss_dp0_in>; + }; + }; + + port@4 { + reg = <4>; + + mdss_intf4_out: endpoint { + remote-endpoint = <&mdss_dp1_in>; + }; + }; + + port@5 { + reg = <5>; + + mdss_intf5_out: endpoint { + remote-endpoint = <&mdss_dp3_in>; + }; + }; + + port@6 { + reg = <6>; + + mdss_intf6_out: endpoint { + remote-endpoint = <&mdss_dp2_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-514000000 { + opp-hz = /bits/ 64 <514000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-575000000 { + opp-hz = /bits/ 64 <575000000>; + required-opps = <&rpmhpd_opp_nom_l1>; + }; + }; + }; + + mdss_dp0: displayport-controller@ae90000 { + compatible = "qcom,x1e80100-dp"; + reg = <0 0x0ae90000 0 0x200>, + <0 0x0ae90200 0 0x200>, + <0 0x0ae90400 0 0xc00>, + <0 0x0ae91000 0 0x400>, + <0 0x0ae91400 0 0x400>; + + interrupts-extended = <&mdss 12>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel", + "stream_1_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>; + assigned-clock-parents = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + operating-points-v2 = <&mdss_dp0_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp0_in: endpoint { + remote-endpoint = <&mdss_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp0_out: endpoint { + data-lanes = <0 1 2 3>; + remote-endpoint = <&usb_1_ss0_qmpphy_dp_in>; + }; + }; + }; + + mdss_dp0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dp1: displayport-controller@ae98000 { + compatible = "qcom,x1e80100-dp"; + reg = <0 0x0ae98000 0 0x200>, + <0 0x0ae98200 0 0x200>, + <0 0x0ae98400 0 0xc00>, + <0 0x0ae99000 0 0x400>, + <0 0x0ae99400 0 0x400>; + + interrupts-extended = <&mdss 13>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX1_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX1_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK>, + <&dispcc DISP_CC_MDSS_DPTX1_PIXEL1_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel", + "stream_1_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC>; + assigned-clock-parents = <&usb_1_ss1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_ss1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&usb_1_ss1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + operating-points-v2 = <&mdss_dp1_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&usb_1_ss1_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp1_in: endpoint { + remote-endpoint = <&mdss_intf4_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp1_out: endpoint { + data-lanes = <0 1 2 3>; + remote-endpoint = <&usb_1_ss1_qmpphy_dp_in>; + }; + }; + }; + + mdss_dp1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dp2: displayport-controller@ae9a000 { + compatible = "qcom,x1e80100-dp"; + reg = <0 0x0ae9a000 0 0x200>, + <0 0x0ae9a200 0 0x200>, + <0 0x0ae9a400 0 0xc00>, + <0 0x0ae9b000 0 0x400>, + <0 0x0ae9b400 0 0x400>; + + interrupts-extended = <&mdss 14>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX2_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX2_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK>, + <&dispcc DISP_CC_MDSS_DPTX2_PIXEL1_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel", + "stream_1_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX2_PIXEL1_CLK_SRC>; + assigned-clock-parents = <&usb_1_ss2_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_ss2_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&usb_1_ss2_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + operating-points-v2 = <&mdss_dp2_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&usb_1_ss2_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dp2_in: endpoint { + remote-endpoint = <&mdss_intf6_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp2_out: endpoint { + data-lanes = <0 1 2 3>; + remote-endpoint = <&usb_1_ss2_qmpphy_dp_in>; + }; + }; + }; + + mdss_dp2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dp3: displayport-controller@aea0000 { + compatible = "qcom,x1e80100-dp"; + reg = <0 0x0aea0000 0 0x200>, + <0 0x0aea0200 0 0x200>, + <0 0x0aea0400 0 0xc00>, + <0 0x0aea1000 0 0x400>, + <0 0x0aea1400 0 0x400>; + + interrupts-extended = <&mdss 15>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX3_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX3_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX3_PIXEL0_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&mdss_dp3_phy 0>, + <&mdss_dp3_phy 1>; + + operating-points-v2 = <&mdss_dp3_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&mdss_dp3_phy>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp3_in: endpoint { + remote-endpoint = <&mdss_intf5_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp3_out: endpoint { + }; + }; + }; + + mdss_dp3_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + }; + + mdss_dp2_phy: phy@aec2a00 { + compatible = "qcom,x1e80100-dp-phy"; + reg = <0 0x0aec2a00 0 0x19c>, + <0 0x0aec2200 0 0xec>, + <0 0x0aec2600 0 0xec>, + <0 0x0aec2000 0 0x1c8>; + + clocks = <&dispcc DISP_CC_MDSS_DPTX2_AUX_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", + "cfg_ahb"; + + power-domains = <&rpmhpd RPMHPD_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss_dp3_phy: phy@aec5a00 { + compatible = "qcom,x1e80100-dp-phy"; + reg = <0 0x0aec5a00 0 0x19c>, + <0 0x0aec5200 0 0xec>, + <0 0x0aec5600 0 0xec>, + <0 0x0aec5000 0 0x1c8>; + + clocks = <&dispcc DISP_CC_MDSS_DPTX3_AUX_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", + "cfg_ahb"; + + power-domains = <&rpmhpd RPMHPD_MX>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,x1e80100-dispcc"; + reg = <0 0x0af00000 0 0x20000>; + clocks = <&bi_tcxo_div2>, + <&bi_tcxo_ao_div2>, + <&gcc GCC_DISP_AHB_CLK>, + <&sleep_clk>, + <0>, /* dsi0 */ + <0>, + <0>, /* dsi1 */ + <0>, + <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>, /* dp0 */ + <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&usb_1_ss1_qmpphy QMP_USB43DP_DP_LINK_CLK>, /* dp1 */ + <&usb_1_ss1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&usb_1_ss2_qmpphy QMP_USB43DP_DP_LINK_CLK>, /* dp2 */ + <&usb_1_ss2_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&mdss_dp3_phy 0>, /* dp3 */ + <&mdss_dp3_phy 1>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,x1e80100-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; + + qcom,pdc-ranges = <0 480 42>, <42 251 5>, + <47 522 52>, <99 609 32>, + <131 717 12>, <143 816 19>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + aoss_qmp: power-management@c300000 { + compatible = "qcom,x1e80100-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + interrupt-parent = <&ipcc>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; + }; + + spmi: arbiter@c400000 { + compatible = "qcom,x1e80100-spmi-pmic-arb"; + reg = <0 0x0c400000 0 0x3000>, + <0 0x0c500000 0 0x400000>, + <0 0x0c440000 0 0x80000>; + reg-names = "core", "chnls", "obsrvr"; + + qcom,ee = <0>; + qcom,channel = <0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + spmi_bus0: spmi@c42d000 { + reg = <0 0x0c42d000 0 0x4000>, + <0 0x0c4c0000 0 0x10000>; + reg-names = "cnfg", "intr"; + + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <4>; + + #address-cells = <2>; + #size-cells = <0>; + }; + + spmi_bus1: spmi@c432000 { + reg = <0 0x0c432000 0 0x4000>, + <0 0x0c4d0000 0 0x10000>; + reg-names = "cnfg", "intr"; + + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 3 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <4>; + + #address-cells = <2>; + #size-cells = <0>; + }; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,x1e80100-tlmm"; + reg = <0 0x0f100000 0 0xf00000>; + + interrupts = ; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + gpio-ranges = <&tlmm 0 0 239>; + wakeup-parent = <&pdc>; + + edp0_hpd_default: edp0-hpd-default-state { + pins = "gpio119"; + function = "edp0_hot"; + bias-disable; + }; + + qup_i2c0_data_clk: qup-i2c0-data-clk-state { + /* SDA, SCL */ + pins = "gpio0", "gpio1"; + function = "qup0_se0"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c1_data_clk: qup-i2c1-data-clk-state { + /* SDA, SCL */ + pins = "gpio4", "gpio5"; + function = "qup0_se1"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c2_data_clk: qup-i2c2-data-clk-state { + /* SDA, SCL */ + pins = "gpio8", "gpio9"; + function = "qup0_se2"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk-state { + /* SDA, SCL */ + pins = "gpio12", "gpio13"; + function = "qup0_se3"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c4_data_clk: qup-i2c4-data-clk-state { + /* SDA, SCL */ + pins = "gpio16", "gpio17"; + function = "qup0_se4"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c5_data_clk: qup-i2c5-data-clk-state { + /* SDA, SCL */ + pins = "gpio20", "gpio21"; + function = "qup0_se5"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk-state { + /* SDA, SCL */ + pins = "gpio24", "gpio25"; + function = "qup0_se6"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c7_data_clk: qup-i2c7-data-clk-state { + /* SDA, SCL */ + pins = "gpio14", "gpio15"; + function = "qup0_se7"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c8_data_clk: qup-i2c8-data-clk-state { + /* SDA, SCL */ + pins = "gpio32", "gpio33"; + function = "qup1_se0"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c9_data_clk: qup-i2c9-data-clk-state { + /* SDA, SCL */ + pins = "gpio36", "gpio37"; + function = "qup1_se1"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c10_data_clk: qup-i2c10-data-clk-state { + /* SDA, SCL */ + pins = "gpio40", "gpio41"; + function = "qup1_se2"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c11_data_clk: qup-i2c11-data-clk-state { + /* SDA, SCL */ + pins = "gpio44", "gpio45"; + function = "qup1_se3"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c12_data_clk: qup-i2c12-data-clk-state { + /* SDA, SCL */ + pins = "gpio48", "gpio49"; + function = "qup1_se4"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c13_data_clk: qup-i2c13-data-clk-state { + /* SDA, SCL */ + pins = "gpio52", "gpio53"; + function = "qup1_se5"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c14_data_clk: qup-i2c14-data-clk-state { + /* SDA, SCL */ + pins = "gpio56", "gpio57"; + function = "qup1_se6"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c15_data_clk: qup-i2c15-data-clk-state { + /* SDA, SCL */ + pins = "gpio54", "gpio55"; + function = "qup1_se7"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c16_data_clk: qup-i2c16-data-clk-state { + /* SDA, SCL */ + pins = "gpio64", "gpio65"; + function = "qup2_se0"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c17_data_clk: qup-i2c17-data-clk-state { + /* SDA, SCL */ + pins = "gpio68", "gpio69"; + function = "qup2_se1"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c18_data_clk: qup-i2c18-data-clk-state { + /* SDA, SCL */ + pins = "gpio72", "gpio73"; + function = "qup2_se2"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c19_data_clk: qup-i2c19-data-clk-state { + /* SDA, SCL */ + pins = "gpio76", "gpio77"; + function = "qup2_se3"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c20_data_clk: qup-i2c20-data-clk-state { + /* SDA, SCL */ + pins = "gpio80", "gpio81"; + function = "qup2_se4"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c21_data_clk: qup-i2c21-data-clk-state { + /* SDA, SCL */ + pins = "gpio84", "gpio85"; + function = "qup2_se5"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c22_data_clk: qup-i2c22-data-clk-state { + /* SDA, SCL */ + pins = "gpio88", "gpio89"; + function = "qup2_se6"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c23_data_clk: qup-i2c23-data-clk-state { + /* SDA, SCL */ + pins = "gpio86", "gpio87"; + function = "qup2_se7"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_spi0_cs: qup-spi0-cs-state { + pins = "gpio3"; + function = "qup0_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi0_data_clk: qup-spi0-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio0", "gpio1", "gpio2"; + function = "qup0_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi1_cs: qup-spi1-cs-state { + pins = "gpio7"; + function = "qup0_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi1_data_clk: qup-spi1-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio4", "gpio5", "gpio6"; + function = "qup0_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi2_cs: qup-spi2-cs-state { + pins = "gpio11"; + function = "qup0_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi2_data_clk: qup-spi2-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio8", "gpio9", "gpio10"; + function = "qup0_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi3_cs: qup-spi3-cs-state { + pins = "gpio15"; + function = "qup0_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi3_data_clk: qup-spi3-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio12", "gpio13", "gpio14"; + function = "qup0_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi4_cs: qup-spi4-cs-state { + pins = "gpio19"; + function = "qup0_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi4_data_clk: qup-spi4-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio16", "gpio17", "gpio18"; + function = "qup0_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi5_cs: qup-spi5-cs-state { + pins = "gpio23"; + function = "qup0_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi5_data_clk: qup-spi5-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio20", "gpio21", "gpio22"; + function = "qup0_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi6_cs: qup-spi6-cs-state { + pins = "gpio27"; + function = "qup0_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi6_data_clk: qup-spi6-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio24", "gpio25", "gpio26"; + function = "qup0_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi7_cs: qup-spi7-cs-state { + pins = "gpio13"; + function = "qup0_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi7_data_clk: qup-spi7-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio14", "gpio15", "gpio12"; + function = "qup0_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi8_cs: qup-spi8-cs-state { + pins = "gpio35"; + function = "qup1_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi8_data_clk: qup-spi8-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio32", "gpio33", "gpio34"; + function = "qup1_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi9_cs: qup-spi9-cs-state { + pins = "gpio39"; + function = "qup1_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi9_data_clk: qup-spi9-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio36", "gpio37", "gpio38"; + function = "qup1_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi10_cs: qup-spi10-cs-state { + pins = "gpio43"; + function = "qup1_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi10_data_clk: qup-spi10-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio40", "gpio41", "gpio42"; + function = "qup1_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi11_cs: qup-spi11-cs-state { + pins = "gpio47"; + function = "qup1_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi11_data_clk: qup-spi11-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio44", "gpio45", "gpio46"; + function = "qup1_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi12_cs: qup-spi12-cs-state { + pins = "gpio51"; + function = "qup1_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi12_data_clk: qup-spi12-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio48", "gpio49", "gpio50"; + function = "qup1_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi13_cs: qup-spi13-cs-state { + pins = "gpio55"; + function = "qup1_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi13_data_clk: qup-spi13-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio52", "gpio53", "gpio54"; + function = "qup1_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi14_cs: qup-spi14-cs-state { + pins = "gpio59"; + function = "qup1_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi14_data_clk: qup-spi14-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio56", "gpio57", "gpio58"; + function = "qup1_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi15_cs: qup-spi15-cs-state { + pins = "gpio53"; + function = "qup1_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi15_data_clk: qup-spi15-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio54", "gpio55", "gpio52"; + function = "qup1_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi16_cs: qup-spi16-cs-state { + pins = "gpio67"; + function = "qup2_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi16_data_clk: qup-spi16-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio64", "gpio65", "gpio66"; + function = "qup2_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi17_cs: qup-spi17-cs-state { + pins = "gpio71"; + function = "qup2_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi17_data_clk: qup-spi17-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio68", "gpio69", "gpio70"; + function = "qup2_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi18_cs: qup-spi18-cs-state { + pins = "gpio75"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi18_data_clk: qup-spi18-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio72", "gpio73", "gpio74"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi19_cs: qup-spi19-cs-state { + pins = "gpio79"; + function = "qup2_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi19_data_clk: qup-spi19-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio76", "gpio77", "gpio78"; + function = "qup2_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi20_cs: qup-spi20-cs-state { + pins = "gpio83"; + function = "qup2_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi20_data_clk: qup-spi20-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio80", "gpio81", "gpio82"; + function = "qup2_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi21_cs: qup-spi21-cs-state { + pins = "gpio87"; + function = "qup2_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi21_data_clk: qup-spi21-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio84", "gpio85", "gpio86"; + function = "qup2_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi22_cs: qup-spi22-cs-state { + pins = "gpio91"; + function = "qup2_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi22_data_clk: qup-spi22-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio88", "gpio89", "gpio90"; + function = "qup2_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi23_cs: qup-spi23-cs-state { + pins = "gpio85"; + function = "qup2_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi23_data_clk: qup-spi23-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio86", "gpio87", "gpio84"; + function = "qup2_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_uart2_default: qup-uart2-default-state { + cts-pins { + pins = "gpio8"; + function = "qup0_se2"; + drive-strength = <2>; + bias-disable; + }; + + rts-pins { + pins = "gpio9"; + function = "qup0_se2"; + drive-strength = <2>; + bias-disable; + }; + + tx-pins { + pins = "gpio10"; + function = "qup0_se2"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio11"; + function = "qup0_se2"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_uart14_default: qup-uart14-default-state { + cts-pins { + pins = "gpio56"; + function = "qup1_se6"; + bias-bus-hold; + }; + + rts-pins { + pins = "gpio57"; + function = "qup1_se6"; + drive-strength = <2>; + bias-disable; + }; + + tx-pins { + pins = "gpio58"; + function = "qup1_se6"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio59"; + function = "qup1_se6"; + bias-pull-up; + }; + }; + + qup_uart21_default: qup-uart21-default-state { + tx-pins { + pins = "gpio86"; + function = "qup2_se5"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio87"; + function = "qup2_se5"; + drive-strength = <2>; + bias-disable; + }; + }; + + sdc2_default: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdc2_sleep: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; + + stm@10002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0x0 0x10002000 0x0 0x1000>, + <0x0 0x16280000 0x0 0x180000>; + reg-names = "stm-base", + "stm-stimulus-base"; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = <&funnel0_in7>; + }; + }; + }; + }; + + tpdm@10003000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x10003000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + status = "disabled"; + + out-ports { + port { + dcc_tpdm_out: endpoint { + remote-endpoint = <&qdss_tpda_in0>; + }; + }; + }; + }; + + tpda@10004000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x10004000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + qdss_tpda_in0: endpoint { + remote-endpoint = <&dcc_tpdm_out>; + }; + }; + + port@1 { + reg = <1>; + + qdss_tpda_in1: endpoint { + remote-endpoint = <&qdss_tpdm_out>; + }; + }; + }; + + out-ports { + port { + qdss_tpda_out: endpoint { + remote-endpoint = <&funnel0_in6>; + }; + }; + }; + }; + + tpdm@1000f000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x1000f000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + qdss_tpdm_out: endpoint { + remote-endpoint = <&qdss_tpda_in1>; + }; + }; + }; + }; + + funnel@10041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x10041000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@6 { + reg = <6>; + + funnel0_in6: endpoint { + remote-endpoint = <&qdss_tpda_out>; + }; + }; + + port@7 { + reg = <7>; + + funnel0_in7: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + + out-ports { + port { + funnel0_out: endpoint { + remote-endpoint = <&qdss_funnel_in0>; + }; + }; + }; + }; + + funnel@10042000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x10042000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + reg = <2>; + + funnel1_in2: endpoint { + remote-endpoint = <&tmess_funnel_out>; + }; + }; + + port@5 { + reg = <5>; + + funnel1_in5: endpoint { + remote-endpoint = <&dlst_funnel_out>; + }; + }; + + port@6 { + reg = <6>; + + funnel1_in6: endpoint { + remote-endpoint = <&dlct1_funnel_out>; + }; + }; + }; + + out-ports { + port { + funnel1_out: endpoint { + remote-endpoint = <&qdss_funnel_in1>; + }; + }; + }; + }; + + funnel@10045000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x10045000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + qdss_funnel_in0: endpoint { + remote-endpoint = <&funnel0_out>; + }; + }; + + port@1 { + reg = <1>; + + qdss_funnel_in1: endpoint { + remote-endpoint = <&funnel1_out>; + }; + }; + }; + + out-ports { + port { + qdss_funnel_out: endpoint { + remote-endpoint = <&aoss_funnel_in7>; + }; + }; + }; + }; + + tpdm@10800000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x10800000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + mxa_tpdm_out: endpoint { + remote-endpoint = <&dlct2_tpda_in15>; + }; + }; + }; + }; + + tpdm@1082c000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x1082c000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + gcc_tpdm_out: endpoint { + remote-endpoint = <&dlct1_tpda_in21>; + }; + }; + }; + }; + + tpdm@10841000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x10841000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + prng_tpdm_out: endpoint { + remote-endpoint = <&dlct1_tpda_in19>; + }; + }; + }; + }; + + tpdm@10844000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x10844000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + lpass_cx_tpdm_out: endpoint { + remote-endpoint = <&lpass_cx_funnel_in0>; + }; + }; + }; + }; + + funnel@10846000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x10846000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + lpass_cx_funnel_in0: endpoint { + remote-endpoint = <&lpass_cx_tpdm_out>; + }; + }; + }; + + out-ports { + port { + lpass_cx_funnel_out: endpoint { + remote-endpoint = <&dlct1_tpda_in4>; + }; + }; + }; + }; + + cti@1098b000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x1098b000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + tpdm@109d0000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x109d0000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + status = "disabled"; + + out-ports { + port { + qm_tpdm_out: endpoint { + remote-endpoint = <&dlct1_tpda_in20>; + }; + }; + }; + }; + + tpdm@10ac0000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x10ac0000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + status = "disabled"; + + out-ports { + port { + dlst_tpdm0_out: endpoint { + remote-endpoint = <&dlst_tpda_in8>; + }; + }; + }; + }; + + tpdm@10ac1000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x10ac1000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + dlst_tpdm1_out: endpoint { + remote-endpoint = <&dlst_tpda_in9>; + }; + }; + }; + }; + + tpda@10ac4000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x10ac4000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@8 { + reg = <8>; + + dlst_tpda_in8: endpoint { + remote-endpoint = <&dlst_tpdm0_out>; + }; + }; + + port@9 { + reg = <9>; + + dlst_tpda_in9: endpoint { + remote-endpoint = <&dlst_tpdm1_out>; + }; + }; + }; + + out-ports { + port { + dlst_tpda_out: endpoint { + remote-endpoint = <&dlst_funnel_in0>; + }; + }; + }; + }; + + funnel@10ac5000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x10ac5000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + dlst_funnel_in0: endpoint { + remote-endpoint = <&dlst_tpda_out>; + }; + }; + }; + + out-ports { + port { + dlst_funnel_out: endpoint { + remote-endpoint = <&funnel1_in5>; + }; + }; + }; + }; + + funnel@10b04000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x10b04000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@3 { + reg = <3>; + + aoss_funnel_in3: endpoint { + remote-endpoint = <&ddr_lpi_funnel_out>; + }; + }; + + port@6 { + reg = <6>; + + aoss_funnel_in6: endpoint { + remote-endpoint = <&aoss_tpda_out>; + }; + }; + + port@7 { + reg = <7>; + + aoss_funnel_in7: endpoint { + remote-endpoint = <&qdss_funnel_out>; + }; + }; + }; + + out-ports { + port { + aoss_funnel_out: endpoint { + remote-endpoint = <&etf0_in>; + }; + }; + }; + }; + + etf0: tmc@10b05000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x0 0x10b05000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + etf0_in: endpoint { + remote-endpoint = <&aoss_funnel_out>; + }; + }; + }; + + out-ports { + port { + etf0_out: endpoint { + remote-endpoint = <&swao_rep_in>; + }; + }; + }; + }; + + replicator@10b06000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0x0 0x10b06000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + swao_rep_in: endpoint { + remote-endpoint = <&etf0_out>; + }; + }; + }; + + out-ports { + port { + swao_rep_out1: endpoint { + remote-endpoint = <&eud_in>; + }; + }; + }; + }; + + tpda@10b08000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x10b08000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + aoss_tpda_in0: endpoint { + remote-endpoint = <&aoss_tpdm0_out>; + }; + }; + + port@1 { + reg = <1>; + + aoss_tpda_in1: endpoint { + remote-endpoint = <&aoss_tpdm1_out>; + }; + }; + + port@2 { + reg = <2>; + + aoss_tpda_in2: endpoint { + remote-endpoint = <&aoss_tpdm2_out>; + }; + }; + + port@3 { + reg = <3>; + + aoss_tpda_in3: endpoint { + remote-endpoint = <&aoss_tpdm3_out>; + }; + }; + + port@4 { + reg = <4>; + + aoss_tpda_in4: endpoint { + remote-endpoint = <&aoss_tpdm4_out>; + }; + }; + }; + + out-ports { + port { + aoss_tpda_out: endpoint { + remote-endpoint = <&aoss_funnel_in6>; + }; + }; + }; + }; + + tpdm@10b09000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x10b09000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + aoss_tpdm0_out: endpoint { + remote-endpoint = <&aoss_tpda_in0>; + }; + }; + }; + }; + + tpdm@10b0a000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x10b0a000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + aoss_tpdm1_out: endpoint { + remote-endpoint = <&aoss_tpda_in1>; + }; + }; + }; + }; + + tpdm@10b0b000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x10b0b000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + aoss_tpdm2_out: endpoint { + remote-endpoint = <&aoss_tpda_in2>; + }; + }; + }; + }; + + tpdm@10b0c000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x10b0c000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + aoss_tpdm3_out: endpoint { + remote-endpoint = <&aoss_tpda_in3>; + }; + }; + }; + }; + + tpdm@10b0d000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x10b0d000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + aoss_tpdm4_out: endpoint { + remote-endpoint = <&aoss_tpda_in4>; + }; + }; + }; + }; + + tpdm@10b20000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x10b20000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + status = "disabled"; + + out-ports { + port { + lpicc_tpdm_out: endpoint { + remote-endpoint = <&ddr_lpi_tpda_in>; + }; + }; + }; + }; + + tpda@10b23000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x10b23000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + status = "disabled"; + + in-ports { + port { + ddr_lpi_tpda_in: endpoint { + remote-endpoint = <&lpicc_tpdm_out>; + }; + }; + }; + + out-ports { + port { + ddr_lpi_tpda_out: endpoint { + remote-endpoint = <&ddr_lpi_funnel_in0>; + }; + }; + }; + }; + + funnel@10b24000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x10b24000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + status = "disabled"; + + in-ports { + port { + ddr_lpi_funnel_in0: endpoint { + remote-endpoint = <&ddr_lpi_tpda_out>; + }; + }; + }; + + out-ports { + port { + ddr_lpi_funnel_out: endpoint { + remote-endpoint = <&aoss_funnel_in3>; + }; + }; + }; + }; + + tpdm@10c08000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x10c08000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + mm_tpdm_out: endpoint { + remote-endpoint = <&mm_funnel_in4>; + }; + }; + }; + }; + + funnel@10c0b000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x10c0b000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + + mm_funnel_in4: endpoint { + remote-endpoint = <&mm_tpdm_out>; + }; + }; + }; + + out-ports { + port { + mm_funnel_out: endpoint { + remote-endpoint = <&dlct2_tpda_in4>; + }; + }; + }; + }; + + tpdm@10c28000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x10c28000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + dlct1_tpdm_out: endpoint { + remote-endpoint = <&dlct1_tpda_in26>; + }; + }; + }; + }; + + tpdm@10c29000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x10c29000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + ipcc_tpdm_out: endpoint { + remote-endpoint = <&dlct1_tpda_in27>; + }; + }; + }; + }; + + tpda@10c2b000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x10c2b000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + + dlct1_tpda_in4: endpoint { + remote-endpoint = <&lpass_cx_funnel_out>; + }; + }; + + port@13 { + reg = <19>; + + dlct1_tpda_in19: endpoint { + remote-endpoint = <&prng_tpdm_out>; + }; + }; + + port@14 { + reg = <20>; + + dlct1_tpda_in20: endpoint { + remote-endpoint = <&qm_tpdm_out>; + }; + }; + + port@15 { + reg = <21>; + + dlct1_tpda_in21: endpoint { + remote-endpoint = <&gcc_tpdm_out>; + }; + }; + + port@1a { + reg = <26>; + + dlct1_tpda_in26: endpoint { + remote-endpoint = <&dlct1_tpdm_out>; + }; + }; + + port@1b { + reg = <27>; + + dlct1_tpda_in27: endpoint { + remote-endpoint = <&ipcc_tpdm_out>; + }; + }; + }; + + out-ports { + port { + dlct1_tpda_out: endpoint { + remote-endpoint = <&dlct1_funnel_in0>; + }; + }; + }; + }; + + funnel@10c2c000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x10c2c000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dlct1_funnel_in0: endpoint { + remote-endpoint = <&dlct1_tpda_out>; + }; + }; + + port@4 { + reg = <4>; + + dlct1_funnel_in4: endpoint { + remote-endpoint = <&dlct2_funnel_out>; + }; + }; + + port@5 { + reg = <5>; + + dlct1_funnel_in5: endpoint { + remote-endpoint = <&ddr_funnel0_out>; + }; + }; + }; + + out-ports { + port { + dlct1_funnel_out: endpoint { + remote-endpoint = <&funnel1_in6>; + }; + }; + }; + }; + + tpdm@10c38000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x10c38000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + dlct2_tpdm0_out: endpoint { + remote-endpoint = <&dlct2_tpda_in16>; + }; + }; + }; + }; + + tpdm@10c39000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x10c39000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + dlct2_tpdm1_out: endpoint { + remote-endpoint = <&dlct2_tpda_in17>; + }; + }; + }; + }; + + tpda@10c3c000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x10c3c000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + + dlct2_tpda_in4: endpoint { + remote-endpoint = <&mm_funnel_out>; + }; + }; + + port@f { + reg = <15>; + + dlct2_tpda_in15: endpoint { + remote-endpoint = <&mxa_tpdm_out>; + }; + }; + + port@10 { + reg = <16>; + + dlct2_tpda_in16: endpoint { + remote-endpoint = <&dlct2_tpdm0_out>; + }; + }; + + port@11 { + reg = <17>; + + dlct2_tpda_in17: endpoint { + remote-endpoint = <&dlct2_tpdm1_out>; + }; + }; + }; + + out-ports { + port { + dlct2_tpda_out: endpoint { + remote-endpoint = <&dlct2_funnel_in0>; + }; + }; + }; + }; + + funnel@10c3d000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x10c3d000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + dlct2_funnel_in0: endpoint { + remote-endpoint = <&dlct2_tpda_out>; + }; + }; + }; + + out-ports { + port { + dlct2_funnel_out: endpoint { + remote-endpoint = <&dlct1_funnel_in4>; + }; + }; + }; + }; + + tpdm@10cc1000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x10cc1000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + status = "disabled"; + + out-ports { + port { + tmess_tpdm1_out: endpoint { + remote-endpoint = <&tmess_tpda_in2>; + }; + }; + }; + }; + + tpda@10cc4000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x10cc4000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + reg = <2>; + + tmess_tpda_in2: endpoint { + remote-endpoint = <&tmess_tpdm1_out>; + }; + }; + }; + + out-ports { + port { + tmess_tpda_out: endpoint { + remote-endpoint = <&tmess_funnel_in0>; + }; + }; + }; + }; + + funnel@10cc5000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x10cc5000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + tmess_funnel_in0: endpoint { + remote-endpoint = <&tmess_tpda_out>; + }; + }; + }; + + out-ports { + port { + tmess_funnel_out: endpoint { + remote-endpoint = <&funnel1_in2>; + }; + }; + }; + }; + + funnel@10d04000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x10d04000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@6 { + reg = <6>; + + ddr_funnel0_in6: endpoint { + remote-endpoint = <&ddr_funnel1_out>; + }; + }; + }; + + out-ports { + port { + ddr_funnel0_out: endpoint { + remote-endpoint = <&dlct1_funnel_in5>; + }; + }; + }; + }; + + tpdm@10d08000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x10d08000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + llcc0_tpdm_out: endpoint { + remote-endpoint = <&llcc_tpda_in0>; + }; + }; + }; + }; + + tpdm@10d09000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x10d09000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + llcc1_tpdm_out: endpoint { + remote-endpoint = <&llcc_tpda_in1>; + }; + }; + }; + }; + + tpdm@10d0a000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x10d0a000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + llcc2_tpdm_out: endpoint { + remote-endpoint = <&llcc_tpda_in2>; + }; + }; + }; + }; + + tpdm@10d0b000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x10d0b000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + llcc3_tpdm_out: endpoint { + remote-endpoint = <&llcc_tpda_in3>; + }; + }; + }; + }; + + tpdm@10d0c000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x10d0c000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + llcc4_tpdm_out: endpoint { + remote-endpoint = <&llcc_tpda_in4>; + }; + }; + }; + }; + + tpdm@10d0d000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x10d0d000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + llcc5_tpdm_out: endpoint { + remote-endpoint = <&llcc_tpda_in5>; + }; + }; + }; + }; + + tpdm@10d0e000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x10d0e000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + llcc6_tpdm_out: endpoint { + remote-endpoint = <&llcc_tpda_in6>; + }; + }; + }; + }; + + tpdm@10d0f000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x10d0f000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + llcc7_tpdm_out: endpoint { + remote-endpoint = <&llcc_tpda_in7>; + }; + }; + }; + }; + + tpda@10d12000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x10d12000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + llcc_tpda_in0: endpoint { + remote-endpoint = <&llcc0_tpdm_out>; + }; + }; + + port@1 { + reg = <1>; + + llcc_tpda_in1: endpoint { + remote-endpoint = <&llcc1_tpdm_out>; + }; + }; + + port@2 { + reg = <2>; + + llcc_tpda_in2: endpoint { + remote-endpoint = <&llcc2_tpdm_out>; + }; + }; + + port@3 { + reg = <3>; + + llcc_tpda_in3: endpoint { + remote-endpoint = <&llcc3_tpdm_out>; + }; + }; + + port@4 { + reg = <4>; + + llcc_tpda_in4: endpoint { + remote-endpoint = <&llcc4_tpdm_out>; + }; + }; + + port@5 { + reg = <5>; + + llcc_tpda_in5: endpoint { + remote-endpoint = <&llcc5_tpdm_out>; + }; + }; + + port@6 { + reg = <6>; + + llcc_tpda_in6: endpoint { + remote-endpoint = <&llcc6_tpdm_out>; + }; + }; + + port@7 { + reg = <7>; + + llcc_tpda_in7: endpoint { + remote-endpoint = <&llcc7_tpdm_out>; + }; + }; + }; + + out-ports { + port { + llcc_tpda_out: endpoint { + remote-endpoint = <&ddr_funnel1_in0>; + }; + }; + }; + }; + + funnel@10d13000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x10d13000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + ddr_funnel1_in0: endpoint { + remote-endpoint = <&llcc_tpda_out>; + }; + }; + }; + + out-ports { + port { + ddr_funnel1_out: endpoint { + remote-endpoint = <&ddr_funnel0_in6>; + }; + }; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,x1e80100-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + + #iommu-cells = <2>; + #global-interrupts = <1>; + + dma-coherent; + }; + + pcie_smmu: iommu@15400000 { + compatible = "arm,smmu-v3"; + reg = <0 0x15400000 0 0x80000>; + #iommu-cells = <1>; + interrupts = , + , + ; + interrupt-names = "eventq", + "gerror", + "cmdq-sync"; + dma-coherent; + status = "reserved"; /* Controlled by Gunyah. */ + }; + + intc: interrupt-controller@17000000 { + compatible = "arm,gic-v3"; + reg = <0 0x17000000 0 0x10000>, /* GICD */ + <0 0x17080000 0 0x300000>; /* GICR * 12 */ + + interrupts = ; + + #interrupt-cells = <3>; + interrupt-controller; + + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x40000>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic_its: msi-controller@17040000 { + compatible = "arm,gic-v3-its"; + reg = <0 0x17040000 0 0x40000>; + + msi-controller; + #msi-cells = <1>; + }; + }; + + cpucp_mbox: mailbox@17430000 { + compatible = "qcom,x1e80100-cpucp-mbox"; + reg = <0 0x17430000 0 0x10000>, <0 0x18830000 0 0x10000>; + interrupts = ; + #mbox-cells = <1>; + }; + + apps_rsc: rsc@17500000 { + compatible = "qcom,rpmh-rsc"; + reg = <0 0x17500000 0 0x10000>, + <0 0x17510000 0 0x10000>, + <0 0x17520000 0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + + interrupts = , + , + ; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = , , + , ; + + label = "apps_rsc"; + power-domains = <&system_pd>; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,x1e80100-rpmh-clk"; + + clocks = <&xo_board>; + clock-names = "xo"; + + #clock-cells = <1>; + }; + + rpmhpd: power-controller { + compatible = "qcom,x1e80100-rpmhpd"; + + operating-points-v2 = <&rpmhpd_opp_table>; + + #power-domain-cells = <1>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp-16 { + opp-level = ; + }; + + rpmhpd_opp_min_svs: opp-48 { + opp-level = ; + }; + + rpmhpd_opp_low_svs_d2: opp-52 { + opp-level = ; + }; + + rpmhpd_opp_low_svs_d1: opp-56 { + opp-level = ; + }; + + rpmhpd_opp_low_svs_d0: opp-60 { + opp-level = ; + }; + + rpmhpd_opp_low_svs: opp-64 { + opp-level = ; + }; + + rpmhpd_opp_low_svs_l1: opp-80 { + opp-level = ; + }; + + rpmhpd_opp_svs: opp-128 { + opp-level = ; + }; + + rpmhpd_opp_svs_l0: opp-144 { + opp-level = ; + }; + + rpmhpd_opp_svs_l1: opp-192 { + opp-level = ; + }; + + rpmhpd_opp_nom: opp-256 { + opp-level = ; + }; + + rpmhpd_opp_nom_l1: opp-320 { + opp-level = ; + }; + + rpmhpd_opp_nom_l2: opp-336 { + opp-level = ; + }; + + rpmhpd_opp_turbo: opp-384 { + opp-level = ; + }; + + rpmhpd_opp_turbo_l1: opp-416 { + opp-level = ; + }; + }; + }; + }; + + timer@17800000 { + compatible = "arm,armv7-timer-mem"; + reg = <0 0x17800000 0 0x1000>; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0 0x20000000>; + + frame@17801000 { + reg = <0 0x17801000 0x1000>, + <0 0x17802000 0x1000>; + + interrupts = , + ; + + frame-number = <0>; + }; + + frame@17803000 { + reg = <0 0x17803000 0x1000>; + + interrupts = ; + + frame-number = <1>; + + status = "disabled"; + }; + + frame@17805000 { + reg = <0 0x17805000 0x1000>; + + interrupts = ; + + frame-number = <2>; + + status = "disabled"; + }; + + frame@17807000 { + reg = <0 0x17807000 0x1000>; + + interrupts = ; + + frame-number = <3>; + + status = "disabled"; + }; + + frame@17809000 { + reg = <0 0x17809000 0x1000>; + + interrupts = ; + + frame-number = <4>; + + status = "disabled"; + }; + + frame@1780b000 { + reg = <0 0x1780b000 0x1000>; + + interrupts = ; + + frame-number = <5>; + + status = "disabled"; + }; + + frame@1780d000 { + reg = <0 0x1780d000 0x1000>; + + interrupts = ; + + frame-number = <6>; + + status = "disabled"; + }; + }; + + sram: sram@18b4e000 { + compatible = "mmio-sram"; + reg = <0x0 0x18b4e000 0x0 0x400>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x18b4e000 0x400>; + + cpu_scp_lpri0: scp-sram-section@0 { + compatible = "arm,scmi-shmem"; + reg = <0x0 0x200>; + }; + + cpu_scp_lpri1: scp-sram-section@200 { + compatible = "arm,scmi-shmem"; + reg = <0x200 0x200>; + }; + }; + + sbsa_watchdog: watchdog@1c840000 { + compatible = "arm,sbsa-gwdt"; + reg = <0 0x1c840000 0 0x1000>, + <0 0x1c850000 0 0x1000>; + interrupts = ; + }; + + qfprom: efuse@221c8000 { + compatible = "qcom,x1e80100-qfprom", "qcom,qfprom"; + reg = <0 0x221c8000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + gpu_speed_bin: gpu-speed-bin@119 { + reg = <0x119 0x2>; + bits = <7 8>; + }; + }; + + pmu@24091000 { + compatible = "qcom,x1e80100-llcc-bwmon", "qcom,sc7280-llcc-bwmon"; + reg = <0 0x24091000 0 0x1000>; + + interrupts = ; + + interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&llcc_bwmon_opp_table>; + + llcc_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <800000>; + }; + + opp-1 { + opp-peak-kBps = <2188000>; + }; + + opp-2 { + opp-peak-kBps = <3072000>; + }; + + opp-3 { + opp-peak-kBps = <6220800>; + }; + + opp-4 { + opp-peak-kBps = <6835200>; + }; + + opp-5 { + opp-peak-kBps = <8371200>; + }; + + opp-6 { + opp-peak-kBps = <10944000>; + }; + + opp-7 { + opp-peak-kBps = <12748800>; + }; + + opp-8 { + opp-peak-kBps = <14745600>; + }; + + opp-9 { + opp-peak-kBps = <16896000>; + }; + }; + }; + + /* cluster0 */ + bwmon_cluster0: pmu@240b3400 { + compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0 0x240b3400 0 0x600>; + + interrupts = ; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + }; + + /* cluster2 */ + bwmon_cluster2: pmu@240b5400 { + compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0 0x240b5400 0 0x600>; + + interrupts = ; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <4800000>; + }; + + opp-1 { + opp-peak-kBps = <7464000>; + }; + + opp-2 { + opp-peak-kBps = <9600000>; + }; + + opp-3 { + opp-peak-kBps = <12896000>; + }; + + opp-4 { + opp-peak-kBps = <14928000>; + }; + + opp-5 { + opp-peak-kBps = <17064000>; + }; + }; + }; + + /* cluster1 */ + pmu@240b6400 { + compatible = "qcom,x1e80100-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0 0x240b6400 0 0x600>; + + interrupts = ; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + }; + + system-cache-controller@25000000 { + compatible = "qcom,x1e80100-llcc"; + reg = <0 0x25000000 0 0x200000>, + <0 0x25200000 0 0x200000>, + <0 0x25400000 0 0x200000>, + <0 0x25600000 0 0x200000>, + <0 0x25800000 0 0x200000>, + <0 0x25a00000 0 0x200000>, + <0 0x25c00000 0 0x200000>, + <0 0x25e00000 0 0x200000>, + <0 0x26000000 0 0x200000>, + <0 0x26200000 0 0x200000>; + reg-names = "llcc0_base", + "llcc1_base", + "llcc2_base", + "llcc3_base", + "llcc4_base", + "llcc5_base", + "llcc6_base", + "llcc7_base", + "llcc_broadcast_base", + "llcc_broadcast_and_base"; + interrupts = ; + }; + + remoteproc_cdsp: remoteproc@32300000 { + compatible = "qcom,x1e80100-cdsp-pas"; + reg = <0x0 0x32300000 0x0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MXC>, + <&rpmhpd RPMHPD_NSP>; + power-domain-names = "cx", + "mxc", + "nsp"; + + interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + + memory-region = <&cdsp_mem>, + <&q6_cdsp_dtb_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "cdsp"; + qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x0c01 0x20>; + dma-coherent; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x0c02 0x20>; + dma-coherent; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0c03 0x20>; + dma-coherent; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x0c04 0x20>; + dma-coherent; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x0c05 0x20>; + dma-coherent; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x0c06 0x20>; + dma-coherent; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x0c07 0x20>; + dma-coherent; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x0c08 0x20>; + dma-coherent; + }; + + /* note: compute-cb@9 is secure */ + + compute-cb@10 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <10>; + iommus = <&apps_smmu 0x0c0c 0x20>; + dma-coherent; + }; + + compute-cb@11 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <11>; + iommus = <&apps_smmu 0x0c0d 0x20>; + dma-coherent; + }; + + compute-cb@12 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <12>; + iommus = <&apps_smmu 0x0c0e 0x20>; + dma-coherent; + }; + + compute-cb@13 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <13>; + iommus = <&apps_smmu 0x0c0f 0x20>; + dma-coherent; + }; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + + interrupts = , + , + , + ; + }; + + thermal_zones: thermal-zones { + aoss0-thermal { + thermal-sensors = <&tsens0 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-0-top-thermal { + thermal-sensors = <&tsens0 1>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-0-btm-thermal { + thermal-sensors = <&tsens0 2>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-1-top-thermal { + thermal-sensors = <&tsens0 3>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-1-btm-thermal { + thermal-sensors = <&tsens0 4>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-2-top-thermal { + thermal-sensors = <&tsens0 5>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-2-btm-thermal { + thermal-sensors = <&tsens0 6>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-3-top-thermal { + thermal-sensors = <&tsens0 7>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-3-btm-thermal { + thermal-sensors = <&tsens0 8>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss0-top-thermal { + thermal-sensors = <&tsens0 9>; + + trips { + cpuss2-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss0-btm-thermal { + thermal-sensors = <&tsens0 10>; + + trips { + cpuss2-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mem-thermal { + thermal-sensors = <&tsens0 11>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + mem-critical { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + video-thermal { + thermal-sensors = <&tsens0 12>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + video-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + aoss1-thermal { + thermal-sensors = <&tsens1 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-0-top-thermal { + thermal-sensors = <&tsens1 1>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-0-btm-thermal { + thermal-sensors = <&tsens1 2>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-1-top-thermal { + thermal-sensors = <&tsens1 3>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-1-btm-thermal { + thermal-sensors = <&tsens1 4>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-2-top-thermal { + thermal-sensors = <&tsens1 5>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-2-btm-thermal { + thermal-sensors = <&tsens1 6>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-3-top-thermal { + thermal-sensors = <&tsens1 7>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-3-btm-thermal { + thermal-sensors = <&tsens1 8>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss1-top-thermal { + thermal-sensors = <&tsens1 9>; + + trips { + cpuss2-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss1-btm-thermal { + thermal-sensors = <&tsens1 10>; + + trips { + cpuss2-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + aoss2-thermal { + thermal-sensors = <&tsens2 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-0-top-thermal { + thermal-sensors = <&tsens2 1>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-0-btm-thermal { + thermal-sensors = <&tsens2 2>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-1-top-thermal { + thermal-sensors = <&tsens2 3>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-1-btm-thermal { + thermal-sensors = <&tsens2 4>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-2-top-thermal { + thermal-sensors = <&tsens2 5>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-2-btm-thermal { + thermal-sensors = <&tsens2 6>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-3-top-thermal { + thermal-sensors = <&tsens2 7>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-3-btm-thermal { + thermal-sensors = <&tsens2 8>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss2-top-thermal { + thermal-sensors = <&tsens2 9>; + + trips { + cpuss2-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss2-btm-thermal { + thermal-sensors = <&tsens2 10>; + + trips { + cpuss2-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + aoss3-thermal { + thermal-sensors = <&tsens3 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + nsp0-thermal { + thermal-sensors = <&tsens3 1>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsp0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + nsp1-thermal { + thermal-sensors = <&tsens3 2>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsp1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + nsp2-thermal { + thermal-sensors = <&tsens3 3>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsp2-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + nsp3-thermal { + thermal-sensors = <&tsens3 4>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsp3-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-0-thermal { + polling-delay-passive = <200>; + + thermal-sensors = <&tsens3 5>; + + cooling-maps { + map0 { + trip = <&gpuss0_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + gpuss0_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <1000>; + type = "passive"; + }; + + gpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-1-thermal { + polling-delay-passive = <200>; + + thermal-sensors = <&tsens3 6>; + + cooling-maps { + map0 { + trip = <&gpuss1_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + gpuss1_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <1000>; + type = "passive"; + }; + + gpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-2-thermal { + polling-delay-passive = <200>; + + thermal-sensors = <&tsens3 7>; + + cooling-maps { + map0 { + trip = <&gpuss2_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + gpuss2_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <1000>; + type = "passive"; + }; + + gpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-3-thermal { + polling-delay-passive = <200>; + + thermal-sensors = <&tsens3 8>; + + cooling-maps { + map0 { + trip = <&gpuss3_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + gpuss3_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <1000>; + type = "passive"; + }; + + gpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-4-thermal { + polling-delay-passive = <200>; + + thermal-sensors = <&tsens3 9>; + + cooling-maps { + map0 { + trip = <&gpuss4_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + gpuss4_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <1000>; + type = "passive"; + }; + + gpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-5-thermal { + polling-delay-passive = <200>; + + thermal-sensors = <&tsens3 10>; + + cooling-maps { + map0 { + trip = <&gpuss5_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + gpuss5_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <1000>; + type = "passive"; + }; + + gpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-6-thermal { + polling-delay-passive = <200>; + + thermal-sensors = <&tsens3 11>; + + cooling-maps { + map0 { + trip = <&gpuss6_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + gpuss6_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <1000>; + type = "passive"; + }; + + gpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-7-thermal { + polling-delay-passive = <200>; + + thermal-sensors = <&tsens3 12>; + + cooling-maps { + map0 { + trip = <&gpuss7_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + gpuss7_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <1000>; + type = "passive"; + }; + + gpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + camera0-thermal { + thermal-sensors = <&tsens3 13>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + camera0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + camera1-thermal { + thermal-sensors = <&tsens3 14>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + camera0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi index ef2b52f3597d9b..eb393f3fd728f0 100644 --- a/arch/arm64/boot/dts/qcom/ipq5424.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi @@ -3,7 +3,7 @@ * IPQ5424 device tree source * * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. - * Copyright (c) 2022-2025 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. */ #include @@ -13,6 +13,7 @@ #include #include #include +#include / { #address-cells = <2>; @@ -57,6 +58,7 @@ cpu0: cpu@0 { clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>; + #cooling-cells = <2>; l2_0: l2-cache { compatible = "cache"; @@ -82,6 +84,7 @@ cpu1: cpu@100 { clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>; + #cooling-cells = <2>; l2_100: l2-cache { compatible = "cache"; @@ -101,6 +104,7 @@ cpu2: cpu@200 { clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>; + #cooling-cells = <2>; l2_200: l2-cache { compatible = "cache"; @@ -120,6 +124,7 @@ cpu3: cpu@300 { clock-names = "cpu"; operating-points-v2 = <&cpu_opp_table>; interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>; + #cooling-cells = <2>; l2_300: l2-cache { compatible = "cache"; @@ -213,7 +218,7 @@ smem@8a800000 { }; tfa@8a832000 { - reg = <0x0 0x8a832000 0x0 0x7d000>; + reg = <0x0 0x8a832000 0x0 0x80000>; no-map; status = "disabled"; }; @@ -815,6 +820,36 @@ apss_clk: clock-controller@fa80000 { #interconnect-cells = <1>; }; + clock-controller@39b00000 { + compatible = "qcom,ipq5424-nsscc"; + reg = <0 0x39b00000 0 0x100000>; + clocks = <&cmn_pll IPQ5424_XO_24MHZ_CLK>, + <&cmn_pll IPQ5424_NSS_300MHZ_CLK>, + <&cmn_pll IPQ5424_PPE_375MHZ_CLK>, + <&gcc GPLL0_OUT_AUX>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <&gcc GCC_NSSCC_CLK>; + clock-names = "xo", + "nss", + "ppe", + "gpll0_out", + "uniphy0_rx", + "uniphy0_tx", + "uniphy1_rx", + "uniphy1_tx", + "uniphy2_rx", + "uniphy2_tx", + "bus"; + #clock-cells = <1>; + #reset-cells = <1>; + #interconnect-cells = <1>; + }; + pcie3: pcie@40000000 { compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574"; reg = <0x0 0x40000000 0x0 0xf1c>, @@ -1235,18 +1270,28 @@ cpu0-thermal { thermal-sensors = <&tsens 14>; trips { - cpu-critical { + cpu0_crit: cpu-critical { temperature = <120000>; hysteresis = <9000>; type = "critical"; }; - cpu-passive { + cpu0_alert: cpu-passive { temperature = <110000>; hysteresis = <9000>; type = "passive"; }; }; + + cooling-maps { + map0 { + trip = <&cpu0_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu1-thermal { @@ -1254,18 +1299,28 @@ cpu1-thermal { thermal-sensors = <&tsens 12>; trips { - cpu-critical { + cpu1_crit: cpu-critical { temperature = <120000>; hysteresis = <9000>; type = "critical"; }; - cpu-passive { + cpu1_alert: cpu-passive { temperature = <110000>; hysteresis = <9000>; type = "passive"; }; }; + + cooling-maps { + map0 { + trip = <&cpu1_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu2-thermal { @@ -1273,18 +1328,28 @@ cpu2-thermal { thermal-sensors = <&tsens 11>; trips { - cpu-critical { + cpu2_crit: cpu-critical { temperature = <120000>; hysteresis = <9000>; type = "critical"; }; - cpu-passive { + cpu2_alert: cpu-passive { temperature = <110000>; hysteresis = <9000>; type = "passive"; }; }; + + cooling-maps { + map0 { + trip = <&cpu2_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu3-thermal { @@ -1292,18 +1357,28 @@ cpu3-thermal { thermal-sensors = <&tsens 13>; trips { - cpu-critical { + cpu3_crit: cpu-critical { temperature = <120000>; hysteresis = <9000>; type = "critical"; }; - cpu-passive { + cpu3_alert: cpu-passive { temperature = <110000>; hysteresis = <9000>; type = "passive"; }; }; + + cooling-maps { + map0 { + trip = <&cpu3_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; wcss-tile2-thermal { diff --git a/arch/arm64/boot/dts/qcom/kodiak.dtsi b/arch/arm64/boot/dts/qcom/kodiak.dtsi new file mode 100644 index 00000000000000..c2ccbb67f800cb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/kodiak.dtsi @@ -0,0 +1,7750 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * sc7280 SoC device tree source + * + * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + i2c14 = &i2c14; + i2c15 = &i2c15; + mmc1 = &sdhc_1; + mmc2 = &sdhc_2; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + spi3 = &spi3; + spi4 = &spi4; + spi5 = &spi5; + spi6 = &spi6; + spi7 = &spi7; + spi8 = &spi8; + spi9 = &spi9; + spi10 = &spi10; + spi11 = &spi11; + spi12 = &spi12; + spi13 = &spi13; + spi14 = &spi14; + spi15 = &spi15; + }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + clock-frequency = <76800000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32764>; + #clock-cells = <0>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + wlan_ce_mem: wlan-ce@4cd000 { + no-map; + reg = <0x0 0x004cd000 0x0 0x1000>; + }; + + hyp_mem: hyp@80000000 { + reg = <0x0 0x80000000 0x0 0x600000>; + no-map; + }; + + xbl_mem: xbl@80600000 { + reg = <0x0 0x80600000 0x0 0x200000>; + no-map; + }; + + aop_mem: aop@80800000 { + reg = <0x0 0x80800000 0x0 0x60000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db@80860000 { + reg = <0x0 0x80860000 0x0 0x20000>; + compatible = "qcom,cmd-db"; + no-map; + }; + + reserved_xbl_uefi_log: xbl-uefi-res@80880000 { + reg = <0x0 0x80884000 0x0 0x10000>; + no-map; + }; + + sec_apps_mem: sec-apps@808ff000 { + reg = <0x0 0x808ff000 0x0 0x1000>; + no-map; + }; + + smem_mem: smem@80900000 { + reg = <0x0 0x80900000 0x0 0x200000>; + no-map; + }; + + cpucp_mem: cpucp@80b00000 { + no-map; + reg = <0x0 0x80b00000 0x0 0x100000>; + }; + + wlan_fw_mem: wlan-fw@80c00000 { + reg = <0x0 0x80c00000 0x0 0xc00000>; + no-map; + }; + + adsp_mem: adsp@86700000 { + reg = <0x0 0x86700000 0x0 0x2800000>; + no-map; + }; + + video_mem: video@8b200000 { + reg = <0x0 0x8b200000 0x0 0x500000>; + no-map; + }; + + cdsp_mem: cdsp@88f00000 { + reg = <0x0 0x88f00000 0x0 0x1e00000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@8b700000 { + reg = <0 0x8b700000 0 0x10000>; + no-map; + }; + + gpu_zap_mem: zap@8b71a000 { + reg = <0 0x8b71a000 0 0x2000>; + no-map; + }; + + mpss_mem: mpss@8b800000 { + reg = <0x0 0x8b800000 0x0 0xf600000>; + no-map; + }; + + wpss_mem: wpss@9ae00000 { + reg = <0x0 0x9ae00000 0x0 0x1900000>; + no-map; + }; + + rmtfs_mem: rmtfs@9c900000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x9c900000 0x0 0x280000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = ; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x0>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + power-domains = <&cpu_pd0>; + power-domain-names = "psci"; + next-level-cache = <&l2_0>; + operating-points-v2 = <&cpu0_opp_table>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + l2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + l3_0: l3-cache { + compatible = "cache"; + cache-level = <3>; + cache-unified; + }; + }; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x100>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + power-domains = <&cpu_pd1>; + power-domain-names = "psci"; + next-level-cache = <&l2_100>; + operating-points-v2 = <&cpu0_opp_table>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + l2_100: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x200>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + power-domains = <&cpu_pd2>; + power-domain-names = "psci"; + next-level-cache = <&l2_200>; + operating-points-v2 = <&cpu0_opp_table>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + l2_200: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x300>; + clocks = <&cpufreq_hw 0>; + enable-method = "psci"; + power-domains = <&cpu_pd3>; + power-domain-names = "psci"; + next-level-cache = <&l2_300>; + operating-points-v2 = <&cpu0_opp_table>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + l2_300: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x400>; + clocks = <&cpufreq_hw 1>; + enable-method = "psci"; + power-domains = <&cpu_pd4>; + power-domain-names = "psci"; + next-level-cache = <&l2_400>; + operating-points-v2 = <&cpu4_opp_table>; + capacity-dmips-mhz = <1946>; + dynamic-power-coefficient = <520>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; + l2_400: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x500>; + clocks = <&cpufreq_hw 1>; + enable-method = "psci"; + power-domains = <&cpu_pd5>; + power-domain-names = "psci"; + next-level-cache = <&l2_500>; + operating-points-v2 = <&cpu4_opp_table>; + capacity-dmips-mhz = <1946>; + dynamic-power-coefficient = <520>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; + l2_500: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x600>; + clocks = <&cpufreq_hw 1>; + enable-method = "psci"; + power-domains = <&cpu_pd6>; + power-domain-names = "psci"; + next-level-cache = <&l2_600>; + operating-points-v2 = <&cpu4_opp_table>; + capacity-dmips-mhz = <1946>; + dynamic-power-coefficient = <520>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; + l2_600: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo"; + reg = <0x0 0x700>; + clocks = <&cpufreq_hw 2>; + enable-method = "psci"; + power-domains = <&cpu_pd7>; + power-domain-names = "psci"; + next-level-cache = <&l2_700>; + operating-points-v2 = <&cpu7_opp_table>; + capacity-dmips-mhz = <1985>; + dynamic-power-coefficient = <552>; + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, + <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; + qcom,freq-domain = <&cpufreq_hw 2>; + #cooling-cells = <2>; + l2_700: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + + core4 { + cpu = <&cpu4>; + }; + + core5 { + cpu = <&cpu5>; + }; + + core6 { + cpu = <&cpu6>; + }; + + core7 { + cpu = <&cpu7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + little_cpu_sleep_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-power-down"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <549>; + exit-latency-us = <901>; + min-residency-us = <1774>; + local-timer-stop; + }; + + little_cpu_sleep_1: cpu-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "little-rail-power-down"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <702>; + exit-latency-us = <915>; + min-residency-us = <4001>; + local-timer-stop; + }; + + big_cpu_sleep_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-power-down"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <523>; + exit-latency-us = <1244>; + min-residency-us = <2207>; + local-timer-stop; + }; + + big_cpu_sleep_1: cpu-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "big-rail-power-down"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <526>; + exit-latency-us = <1854>; + min-residency-us = <5555>; + local-timer-stop; + }; + }; + + domain_idle_states: domain-idle-states { + cluster_sleep_apss_off: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <2752>; + exit-latency-us = <3048>; + min-residency-us = <6118>; + }; + + cluster_sleep_cx_ret: cluster-sleep-1 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41001344>; + entry-latency-us = <3263>; + exit-latency-us = <4562>; + min-residency-us = <8467>; + }; + + cluster_sleep_llcc_off: cluster-sleep-2 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x4100b344>; + entry-latency-us = <3638>; + exit-latency-us = <6562>; + min-residency-us = <9826>; + }; + }; + }; + + cpu0_opp_table: opp-table-cpu0 { + compatible = "operating-points-v2"; + opp-shared; + + cpu0_opp_300mhz: opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <800000 9600000>; + }; + + cpu0_opp_691mhz: opp-691200000 { + opp-hz = /bits/ 64 <691200000>; + opp-peak-kBps = <800000 17817600>; + }; + + cpu0_opp_806mhz: opp-806400000 { + opp-hz = /bits/ 64 <806400000>; + opp-peak-kBps = <800000 20889600>; + }; + + cpu0_opp_941mhz: opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + opp-peak-kBps = <1804000 24576000>; + }; + + cpu0_opp_1152mhz: opp-1152000000 { + opp-hz = /bits/ 64 <1152000000>; + opp-peak-kBps = <2188000 27033600>; + }; + + cpu0_opp_1325mhz: opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + opp-peak-kBps = <2188000 33792000>; + }; + + cpu0_opp_1517mhz: opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <3072000 38092800>; + }; + + cpu0_opp_1651mhz: opp-1651200000 { + opp-hz = /bits/ 64 <1651200000>; + opp-peak-kBps = <3072000 41779200>; + }; + + cpu0_opp_1805mhz: opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + opp-peak-kBps = <4068000 48537600>; + }; + + cpu0_opp_1958mhz: opp-1958400000 { + opp-hz = /bits/ 64 <1958400000>; + opp-peak-kBps = <4068000 48537600>; + }; + + cpu0_opp_2016mhz: opp-2016000000 { + opp-hz = /bits/ 64 <2016000000>; + opp-peak-kBps = <6220000 48537600>; + }; + }; + + cpu4_opp_table: opp-table-cpu4 { + compatible = "operating-points-v2"; + opp-shared; + + cpu4_opp_691mhz: opp-691200000 { + opp-hz = /bits/ 64 <691200000>; + opp-peak-kBps = <1804000 9600000>; + }; + + cpu4_opp_941mhz: opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + opp-peak-kBps = <2188000 17817600>; + }; + + cpu4_opp_1229mhz: opp-1228800000 { + opp-hz = /bits/ 64 <1228800000>; + opp-peak-kBps = <4068000 24576000>; + }; + + cpu4_opp_1344mhz: opp-1344000000 { + opp-hz = /bits/ 64 <1344000000>; + opp-peak-kBps = <4068000 24576000>; + }; + + cpu4_opp_1517mhz: opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <4068000 24576000>; + }; + + cpu4_opp_1651mhz: opp-1651200000 { + opp-hz = /bits/ 64 <1651200000>; + opp-peak-kBps = <6220000 38092800>; + }; + + cpu4_opp_1901mhz: opp-1900800000 { + opp-hz = /bits/ 64 <1900800000>; + opp-peak-kBps = <6220000 44851200>; + }; + + cpu4_opp_2054mhz: opp-2054400000 { + opp-hz = /bits/ 64 <2054400000>; + opp-peak-kBps = <6220000 44851200>; + }; + + cpu4_opp_2112mhz: opp-2112000000 { + opp-hz = /bits/ 64 <2112000000>; + opp-peak-kBps = <6220000 44851200>; + }; + + cpu4_opp_2131mhz: opp-2131200000 { + opp-hz = /bits/ 64 <2131200000>; + opp-peak-kBps = <6220000 44851200>; + }; + + cpu4_opp_2208mhz: opp-2208000000 { + opp-hz = /bits/ 64 <2208000000>; + opp-peak-kBps = <6220000 44851200>; + }; + + cpu4_opp_2400mhz: opp-2400000000 { + opp-hz = /bits/ 64 <2400000000>; + opp-peak-kBps = <12787200 48537600>; + }; + + cpu4_opp_2611mhz: opp-2611200000 { + opp-hz = /bits/ 64 <2611200000>; + opp-peak-kBps = <12787200 48537600>; + }; + }; + + cpu7_opp_table: opp-table-cpu7 { + compatible = "operating-points-v2"; + opp-shared; + + cpu7_opp_806mhz: opp-806400000 { + opp-hz = /bits/ 64 <806400000>; + opp-peak-kBps = <1804000 9600000>; + }; + + cpu7_opp_1056mhz: opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-peak-kBps = <2188000 17817600>; + }; + + cpu7_opp_1325mhz: opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + opp-peak-kBps = <4068000 24576000>; + }; + + cpu7_opp_1517mhz: opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <4068000 24576000>; + }; + + cpu7_opp_1766mhz: opp-1766400000 { + opp-hz = /bits/ 64 <1766400000>; + opp-peak-kBps = <6220000 38092800>; + }; + + cpu7_opp_1862mhz: opp-1862400000 { + opp-hz = /bits/ 64 <1862400000>; + opp-peak-kBps = <6220000 38092800>; + }; + + cpu7_opp_2035mhz: opp-2035200000 { + opp-hz = /bits/ 64 <2035200000>; + opp-peak-kBps = <6220000 38092800>; + }; + + cpu7_opp_2112mhz: opp-2112000000 { + opp-hz = /bits/ 64 <2112000000>; + opp-peak-kBps = <6220000 44851200>; + }; + + cpu7_opp_2208mhz: opp-2208000000 { + opp-hz = /bits/ 64 <2208000000>; + opp-peak-kBps = <6220000 44851200>; + }; + + cpu7_opp_2381mhz: opp-2380800000 { + opp-hz = /bits/ 64 <2380800000>; + opp-peak-kBps = <6832000 44851200>; + }; + + cpu7_opp_2400mhz: opp-2400000000 { + opp-hz = /bits/ 64 <2400000000>; + opp-peak-kBps = <12787200 48537600>; + }; + + cpu7_opp_2515mhz: opp-2515200000 { + opp-hz = /bits/ 64 <2515200000>; + opp-peak-kBps = <12787200 48537600>; + }; + + cpu7_opp_2707mhz: opp-2707200000 { + opp-hz = /bits/ 64 <2707200000>; + opp-peak-kBps = <12787200 48537600>; + }; + + cpu7_opp_3014mhz: opp-3014400000 { + opp-hz = /bits/ 64 <3014400000>; + opp-peak-kBps = <12787200 48537600>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x80000000 0 0>; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sc7280", "qcom,scm"; + qcom,dload-mode = <&tcsr_2 0x13000>; + }; + }; + + clk_virt: interconnect { + compatible = "qcom,sc7280-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + cdsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + cdsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-wpss { + compatible = "qcom,smp2p"; + qcom,smem = <617>, <616>; + interrupts-extended = <&ipcc IPCC_CLIENT_WPSS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_WPSS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <13>; + + wpss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + wpss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + wlan_smp2p_out: wlan-ap-to-wpss { + qcom,entry-name = "wlan"; + #qcom,smem-state-cells = <1>; + }; + + wlan_smp2p_in: wlan-wpss-to-ap { + qcom,entry-name = "wlan"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmu-a55 { + compatible = "arm,cortex-a55-pmu"; + interrupts = ; + }; + + pmu-a78 { + compatible = "arm,cortex-a78-pmu"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + cpu_pd0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; + }; + + cpu_pd1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; + }; + + cpu_pd2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; + }; + + cpu_pd3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; + }; + + cpu_pd4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>; + }; + + cpu_pd5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>; + }; + + cpu_pd6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>; + }; + + cpu_pd7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>; + }; + + cluster_pd: power-domain-cluster { + #power-domain-cells = <0>; + domain-idle-states = <&cluster_sleep_apss_off &cluster_sleep_cx_ret &cluster_sleep_llcc_off>; + }; + }; + + qspi_opp_table: opp-table-qspi { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + qup_opp_table: opp-table-qup { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-128000000 { + opp-hz = /bits/ 64 <128000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sc7280"; + reg = <0 0x00100000 0 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>, + <0>, <&pcie1_phy>, + <&ufs_mem_phy 0>, <&ufs_mem_phy 1>, <&ufs_mem_phy 2>, + <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; + clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", + "pcie_0_pipe_clk", "pcie_1_pipe_clk", + "ufs_phy_rx_symbol_0_clk", "ufs_phy_rx_symbol_1_clk", + "ufs_phy_tx_symbol_0_clk", + "usb3_phy_wrapper_gcc_usb30_pipe_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + power-domains = <&rpmhpd SC7280_CX>; + }; + + ipcc: mailbox@408000 { + compatible = "qcom,sc7280-ipcc", "qcom,ipcc"; + reg = <0 0x00408000 0 0x1000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + qfprom: efuse@784000 { + compatible = "qcom,sc7280-qfprom", "qcom,qfprom"; + reg = <0 0x00784000 0 0xa20>, + <0 0x00780000 0 0xa20>, + <0 0x00782000 0 0x120>, + <0 0x00786000 0 0x1fff>; + clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>; + clock-names = "core"; + power-domains = <&rpmhpd SC7280_MX>; + #address-cells = <1>; + #size-cells = <1>; + + gpu_speed_bin: gpu-speed-bin@1e9 { + reg = <0x1e9 0x2>; + bits = <5 8>; + }; + }; + + sdhc_1: mmc@7c4000 { + compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk>, <&sdc1_cmd>, <&sdc1_data>, <&sdc1_rclk>; + pinctrl-1 = <&sdc1_clk_sleep>, <&sdc1_cmd_sleep>, <&sdc1_data_sleep>, <&sdc1_rclk_sleep>; + status = "disabled"; + + reg = <0 0x007c4000 0 0x1000>, + <0 0x007c5000 0 0x1000>; + reg-names = "hc", "cqhci"; + + iommus = <&apps_smmu 0xc0 0x0>; + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + interconnects = <&aggre1_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_1 0>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&sdhc1_opp_table>; + + bus-width = <8>; + supports-cqe; + dma-coherent; + + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + + resets = <&gcc GCC_SDCC1_BCR>; + + sdhc1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1800000 400000>; + opp-avg-kBps = <100000 0>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <5400000 1600000>; + opp-avg-kBps = <390000 0>; + }; + }; + }; + + gpi_dma0: dma-controller@900000 { + #dma-cells = <3>; + compatible = "qcom,sc7280-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0 0x00900000 0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + dma-channels = <12>; + dma-channel-mask = <0x7f>; + iommus = <&apps_smmu 0x0136 0x0>; + status = "disabled"; + }; + + qupv3_id_0: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x009c0000 0 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + iommus = <&apps_smmu 0x123 0x0>; + status = "disabled"; + + i2c0: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00980000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi0: spi@980000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00980000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart0: serial@980000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00980000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart0_cts>, <&qup_uart0_rts>, <&qup_uart0_tx>, <&qup_uart0_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c1: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00984000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi1: spi@984000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00984000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart1: serial@984000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00984000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart1_cts>, <&qup_uart1_rts>, <&qup_uart1_tx>, <&qup_uart1_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c2: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00988000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi2: spi@988000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00988000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart2: serial@988000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00988000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart2_cts>, <&qup_uart2_rts>, <&qup_uart2_tx>, <&qup_uart2_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c3: i2c@98c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0098c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi3: spi@98c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0098c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart3: serial@98c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0098c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart3_cts>, <&qup_uart3_rts>, <&qup_uart3_tx>, <&qup_uart3_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c4: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00990000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi4: spi@990000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00990000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart4: serial@990000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00990000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart4_cts>, <&qup_uart4_rts>, <&qup_uart4_tx>, <&qup_uart4_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c5: i2c@994000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00994000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi5: spi@994000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00994000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart5: serial@994000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x00994000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart5_tx>, <&qup_uart5_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c6: i2c@998000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00998000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi6: spi@998000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00998000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart6: serial@998000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00998000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart6_cts>, <&qup_uart6_rts>, <&qup_uart6_tx>, <&qup_uart6_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c7: i2c@99c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0099c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, + <&gpi_dma0 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi7: spi@99c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0099c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, + <&gpi_dma0 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart7: serial@99c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0099c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart7_cts>, <&qup_uart7_rts>, <&qup_uart7_tx>, <&qup_uart7_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@a00000 { + #dma-cells = <3>; + compatible = "qcom,sc7280-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0 0x00a00000 0 0x60000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + dma-channels = <12>; + dma-channel-mask = <0x1e>; + iommus = <&apps_smmu 0x56 0x0>; + status = "disabled"; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00ac0000 0 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + iommus = <&apps_smmu 0x43 0x0>; + status = "disabled"; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart8: serial@a80000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart8_cts>, <&qup_uart8_rts>, <&qup_uart8_tx>, <&qup_uart8_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart9: serial@a84000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart9_cts>, <&qup_uart9_rts>, <&qup_uart9_tx>, <&qup_uart9_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart10: serial@a88000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart10_cts>, <&qup_uart10_rts>, <&qup_uart10_tx>, <&qup_uart10_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart11: serial@a8c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart11_cts>, <&qup_uart11_rts>, <&qup_uart11_tx>, <&qup_uart11_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart12: serial@a90000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart12_cts>, <&qup_uart12_rts>, <&qup_uart12_tx>, <&qup_uart12_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart13: serial@a94000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart13_cts>, <&qup_uart13_rts>, <&qup_uart13_tx>, <&qup_uart13_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi14: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a98000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, + <&gpi_dma1 1 6 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart14: serial@a98000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a98000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart14_cts>, <&qup_uart14_rts>, <&qup_uart14_tx>, <&qup_uart14_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c15: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a9c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c15_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + power-domains = <&rpmhpd SC7280_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, + <&gpi_dma1 1 7 QCOM_GPI_I2C>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + spi15: spi@a9c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a9c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>, + <&gpi_dma1 1 7 QCOM_GPI_SPI>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + uart15: serial@a9c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a9c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart15_cts>, <&qup_uart15_rts>, <&qup_uart15_tx>, <&qup_uart15_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + }; + + rng: rng@10d3000 { + compatible = "qcom,sc7280-trng", "qcom,trng"; + reg = <0 0x010d3000 0 0x1000>; + }; + + cnoc2: interconnect@1500000 { + reg = <0 0x01500000 0 0x1000>; + compatible = "qcom,sc7280-cnoc2"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + cnoc3: interconnect@1502000 { + reg = <0 0x01502000 0 0x1000>; + compatible = "qcom,sc7280-cnoc3"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect@1580000 { + reg = <0 0x01580000 0 0x4>; + compatible = "qcom,sc7280-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1680000 { + reg = <0 0x01680000 0 0x15480>; + compatible = "qcom,sc7280-system-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sc7280-aggre1-noc"; + reg = <0 0x016e0000 0 0x1c080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>; + }; + + aggre2_noc: interconnect@1700000 { + reg = <0 0x01700000 0 0x2b080>; + compatible = "qcom,sc7280-aggre2-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&rpmhcc RPMH_IPA_CLK>; + }; + + mmss_noc: interconnect@1740000 { + reg = <0 0x01740000 0 0x1e080>; + compatible = "qcom,sc7280-mmss-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + wifi: wifi@17a10040 { + compatible = "qcom,wcn6750-wifi"; + reg = <0 0x17a10040 0 0x0>; + iommus = <&apps_smmu 0x1c00 0x1>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + qcom,rproc = <&remoteproc_wpss>; + memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>; + status = "disabled"; + qcom,smem-states = <&wlan_smp2p_out 0>; + qcom,smem-state-names = "wlan-smp2p-out"; + }; + + pcie0: pcie@1c00000 { + compatible = "qcom,pcie-sc7280"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>, + <0 0x01c03000 0 0x1000>; + reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; + + interrupts = , + , + , + , + , + , + , + , + ; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK_SRC>, + <&pcie0_phy>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_CENTER_SF_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>; + clock-names = "pipe", + "pipe_mux", + "phy_pipe", + "ref", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu", + "ddrss_sf_tbu", + "aggre0", + "aggre1"; + + iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, + <0x100 &apps_smmu 0x1c01 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc GCC_PCIE_0_GDSC>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_clkreq_n>; + dma-coherent; + + status = "disabled"; + + pcie0_port: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy"; + reg = <0 0x01c06000 0 0x1000>; + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_CLKREF_EN>, + <&gcc GCC_PCIE0_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen", + "pipe"; + + clock-output-names = "pcie_0_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE0_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + }; + + pcie1: pcie@1c08000 { + compatible = "qcom,pcie-sc7280"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + + reg-names = "parf", "dbi", "elbi", "atu", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <2>; + + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + + interrupts = , + , + , + , + , + , + , + , + ; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK_SRC>, + <&pcie1_phy>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_CENTER_SF_AXI_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; + + clock-names = "pipe", + "pipe_mux", + "phy_pipe", + "ref", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "tbu", + "ddrss_sf_tbu", + "aggre0", + "aggre1"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + resets = <&gcc GCC_PCIE_1_BCR>; + reset-names = "pci"; + + power-domains = <&gcc GCC_PCIE_1_GDSC>; + + phys = <&pcie1_phy>; + phy-names = "pciephy"; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_clkreq_n>; + + dma-coherent; + + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>; + + status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + }; + + pcie1_phy: phy@1c0e000 { + compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c0e000 0 0x1000>; + clocks = <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_CLKREF_EN>, + <&gcc GCC_PCIE1_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen", + "pipe"; + + clock-output-names = "pcie_1_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE1_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + }; + + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,sc7280-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0x0 0x01d84000 0x0 0x3000>; + interrupts = ; + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc GCC_UFS_PHY_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + iommus = <&apps_smmu 0x80 0x0>; + dma-coherent; + + interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &cnoc2 SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "ufs-ddr", "cpu-ufs"; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + + operating-points-v2 = <&ufs_opp_table>; + + qcom,ice = <&ice>; + + status = "disabled"; + + ufs_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <75000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <150000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <300000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sc7280-qmp-ufs-phy"; + reg = <0x0 0x01d87000 0x0 0xe00>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_1_CLKREF_EN>; + clock-names = "ref", "ref_aux", "qref"; + + power-domains = <&rpmhpd SC7280_MX>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + ice: crypto@1d88000 { + compatible = "qcom,sc7280-inline-crypto-engine", + "qcom,inline-crypto-engine"; + reg = <0 0x01d88000 0 0x8000>; + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + }; + + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0x0 0x01dc4000 0x0 0x28000>; + interrupts = ; + #dma-cells = <1>; + iommus = <&apps_smmu 0x4e4 0x0011>, + <&apps_smmu 0x4e6 0x0011>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <16>; + qcom,num-ees = <4>; + }; + + crypto: crypto@1dfa000 { + compatible = "qcom,sc7280-qce", "qcom,sm8150-qce", "qcom,qce"; + reg = <0x0 0x01dfa000 0x0 0x6000>; + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x4e4 0x0011>, + <&apps_smmu 0x4e4 0x0011>; + interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "memory"; + }; + + ipa: ipa@1e40000 { + compatible = "qcom,sc7280-ipa"; + + iommus = <&apps_smmu 0x480 0x0>, + <&apps_smmu 0x482 0x0>; + reg = <0 0x01e40000 0 0x8000>, + <0 0x01e50000 0 0x4ad0>, + <0 0x01e04000 0 0x23000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_IPA_CFG 0>; + interconnect-names = "memory", + "config"; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + status = "disabled"; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0 0x01f40000 0 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr_1: syscon@1f60000 { + compatible = "qcom,sc7280-tcsr", "syscon"; + reg = <0 0x01f60000 0 0x20000>; + }; + + tcsr_2: syscon@1fc0000 { + compatible = "qcom,sc7280-tcsr", "syscon"; + reg = <0 0x01fc0000 0 0x30000>; + }; + + lpasscc: lpasscc@3000000 { + compatible = "qcom,sc7280-lpasscc"; + reg = <0 0x03000000 0 0x40>, + <0 0x03c04000 0 0x4>; + reg-names = "qdsp6ss", "top_cc"; + clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>; + clock-names = "iface"; + #clock-cells = <1>; + status = "reserved"; /* Owned by ADSP firmware */ + }; + + lpass_rx_macro: codec@3200000 { + compatible = "qcom,sc7280-lpass-rx-macro"; + reg = <0 0x03200000 0 0x1000>; + + pinctrl-names = "default"; + pinctrl-0 = <&lpass_rx_swr_clk>, <&lpass_rx_swr_data>; + + clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>, + <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>, + <&lpass_va_macro>; + clock-names = "mclk", "npl", "fsgen"; + + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>, + <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; + power-domain-names = "macro", "dcodec"; + + #clock-cells = <0>; + #sound-dai-cells = <1>; + + status = "disabled"; + }; + + swr0: soundwire@3210000 { + compatible = "qcom,soundwire-v1.6.0"; + reg = <0 0x03210000 0 0x2000>; + + interrupts = ; + clocks = <&lpass_rx_macro>; + clock-names = "iface"; + + qcom,din-ports = <0>; + qcom,dout-ports = <5>; + + resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>; + reset-names = "swr_audio_cgcr"; + + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>; + qcom,ports-sinterval-low = /bits/ 8 <0x03 0x3f 0x1f 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x01>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00>; + + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + + status = "disabled"; + }; + + lpass_tx_macro: codec@3220000 { + compatible = "qcom,sc7280-lpass-tx-macro"; + reg = <0 0x03220000 0 0x1000>; + + pinctrl-names = "default"; + pinctrl-0 = <&lpass_tx_swr_clk>, <&lpass_tx_swr_data>; + + clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>, + <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>, + <&lpass_va_macro>; + clock-names = "mclk", "npl", "fsgen"; + + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>, + <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; + power-domain-names = "macro", "dcodec"; + + #clock-cells = <0>; + #sound-dai-cells = <1>; + + status = "disabled"; + }; + + swr1: soundwire@3230000 { + compatible = "qcom,soundwire-v1.6.0"; + reg = <0 0x03230000 0 0x2000>; + + interrupts-extended = <&intc GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_tx_macro>; + clock-names = "iface"; + + qcom,din-ports = <3>; + qcom,dout-ports = <0>; + + resets = <&lpass_audiocc LPASS_AUDIO_SWR_TX_CGCR>; + reset-names = "swr_audio_cgcr"; + + qcom,ports-sinterval-low = /bits/ 8 <0x01 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x00 0x02>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0x00 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x00 0x01 0x00>; + + #sound-dai-cells = <1>; + #address-cells = <2>; + #size-cells = <0>; + + status = "disabled"; + }; + + lpass_wsa_macro: codec@3240000 { + compatible = "qcom,sc7280-lpass-wsa-macro"; + reg = <0x0 0x03240000 0x0 0x1000>; + + clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>, + <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>, + <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_va_macro>; + clock-names = "mclk", + "npl", + "macro", + "dcodec", + "fsgen"; + + pinctrl-0 = <&lpass_wsa_swr_clk>, <&lpass_wsa_swr_data>; + pinctrl-names = "default"; + + #clock-cells = <0>; + clock-output-names = "mclk"; + #sound-dai-cells = <1>; + + status = "disabled"; + }; + + swr2: soundwire@3250000 { + compatible = "qcom,soundwire-v1.6.0"; + reg = <0x0 0x03250000 0x0 0x2000>; + + interrupts = ; + clocks = <&lpass_wsa_macro>; + clock-names = "iface"; + + resets = <&lpass_audiocc LPASS_AUDIO_SWR_WSA_CGCR>; + reset-names = "swr_audio_cgcr"; + + qcom,din-ports = <2>; + qcom,dout-ports = <6>; + + qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x07 + 0x1f 0x3f 0x0f 0x0f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 + 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff + 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff + 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + + status = "disabled"; + }; + + lpass_audiocc: clock-controller@3300000 { + compatible = "qcom,sc7280-lpassaudiocc"; + reg = <0 0x03300000 0 0x30000>, + <0 0x032a9000 0 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>; + clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src"; + power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + }; + + lpass_va_macro: codec@3370000 { + compatible = "qcom,sc7280-lpass-va-macro"; + reg = <0 0x03370000 0 0x1000>; + + clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>; + clock-names = "mclk"; + + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>, + <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; + power-domain-names = "macro", "dcodec"; + + #clock-cells = <0>; + #sound-dai-cells = <1>; + + status = "disabled"; + }; + + lpass_aon: clock-controller@3380000 { + compatible = "qcom,sc7280-lpassaoncc"; + reg = <0 0x03380000 0 0x30000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&lpass_core LPASS_CORE_CC_CORE_CLK>; + clock-names = "bi_tcxo", "bi_tcxo_ao", "iface"; + #clock-cells = <1>; + #power-domain-cells = <1>; + status = "reserved"; /* Owned by ADSP firmware */ + }; + + lpass_core: clock-controller@3900000 { + compatible = "qcom,sc7280-lpasscorecc"; + reg = <0 0x03900000 0 0x50000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>; + #clock-cells = <1>; + #power-domain-cells = <1>; + status = "reserved"; /* Owned by ADSP firmware */ + }; + + lpass_cpu: audio@3987000 { + compatible = "qcom,sc7280-lpass-cpu"; + + reg = <0 0x03987000 0 0x68000>, + <0 0x03b00000 0 0x29000>, + <0 0x03260000 0 0xc000>, + <0 0x03280000 0 0x29000>, + <0 0x03340000 0 0x29000>, + <0 0x0336c000 0 0x3000>; + reg-names = "lpass-hdmiif", + "lpass-lpaif", + "lpass-rxtx-cdc-dma-lpm", + "lpass-rxtx-lpaif", + "lpass-va-lpaif", + "lpass-va-cdc-dma-lpm"; + + iommus = <&apps_smmu 0x1820 0>, + <&apps_smmu 0x1821 0>, + <&apps_smmu 0x1832 0>; + + power-domains = <&rpmhpd SC7280_LCX>; + power-domain-names = "lcx"; + required-opps = <&rpmhpd_opp_nom>; + + clocks = <&lpass_aon LPASS_AON_CC_AUDIO_HM_H_CLK>, + <&lpass_core LPASS_CORE_CC_EXT_MCLK0_CLK>, + <&lpass_core LPASS_CORE_CC_SYSNOC_MPORT_CORE_CLK>, + <&lpass_core LPASS_CORE_CC_EXT_IF0_IBIT_CLK>, + <&lpass_core LPASS_CORE_CC_EXT_IF1_IBIT_CLK>, + <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM_CLK>, + <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM0_CLK>, + <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM1_CLK>, + <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM2_CLK>, + <&lpass_aon LPASS_AON_CC_VA_MEM0_CLK>; + clock-names = "aon_cc_audio_hm_h", + "audio_cc_ext_mclk0", + "core_cc_sysnoc_mport_core", + "core_cc_ext_if0_ibit", + "core_cc_ext_if1_ibit", + "audio_cc_codec_mem", + "audio_cc_codec_mem0", + "audio_cc_codec_mem1", + "audio_cc_codec_mem2", + "aon_cc_va_mem0"; + + #sound-dai-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + interrupts = , + , + , + ; + interrupt-names = "lpass-irq-lpaif", + "lpass-irq-hdmi", + "lpass-irq-vaif", + "lpass-irq-rxtxif"; + + status = "disabled"; + }; + + slimbam: dma-controller@3a84000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0 0x03a84000 0 0x20000>; + interrupts = ; + #dma-cells = <1>; + qcom,controlled-remotely; + num-channels = <31>; + qcom,ee = <1>; + qcom,num-ees = <2>; + iommus = <&apps_smmu 0x1826 0x0>; + status = "disabled"; + }; + + slim: slim-ngd@3ac0000 { + compatible = "qcom,slim-ngd-v1.5.0"; + reg = <0 0x03ac0000 0 0x2c000>; + interrupts = ; + dmas = <&slimbam 3>, <&slimbam 4>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x1826 0x0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + lpass_hm: clock-controller@3c00000 { + compatible = "qcom,sc7280-lpasshm"; + reg = <0 0x03c00000 0 0x28>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + #clock-cells = <1>; + #power-domain-cells = <1>; + status = "reserved"; /* Owned by ADSP firmware */ + }; + + lpass_ag_noc: interconnect@3c40000 { + reg = <0 0x03c40000 0 0xf080>; + compatible = "qcom,sc7280-lpass-ag-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_tlmm: pinctrl@33c0000 { + compatible = "qcom,sc7280-lpass-lpi-pinctrl"; + reg = <0 0x033c0000 0x0 0x20000>, + <0 0x03550000 0x0 0x10000>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 15>; + + lpass_dmic01_clk: dmic01-clk-state { + pins = "gpio6"; + function = "dmic1_clk"; + drive-strength = <8>; + bias-disable; + }; + + lpass_dmic01_data: dmic01-data-state { + pins = "gpio7"; + function = "dmic1_data"; + drive-strength = <8>; + bias-pull-down; + }; + + lpass_dmic23_clk: dmic23-clk-state { + pins = "gpio8"; + function = "dmic2_clk"; + drive-strength = <8>; + bias-disable; + }; + + lpass_dmic23_data: dmic23-data-state { + pins = "gpio9"; + function = "dmic2_data"; + drive-strength = <8>; + bias-pull-down; + }; + + lpass_rx_swr_clk: rx-swr-clk-state { + pins = "gpio3"; + function = "swr_rx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + lpass_rx_swr_data: rx-swr-data-state { + pins = "gpio4", "gpio5"; + function = "swr_rx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + + lpass_tx_swr_clk: tx-swr-clk-state { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + lpass_tx_swr_data: tx-swr-data-state { + pins = "gpio1", "gpio2", "gpio14"; + function = "swr_tx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + + lpass_wsa_swr_clk: wsa-swr-clk-state { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + lpass_wsa_swr_data: wsa-swr-data-state { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + gpu: gpu@3d00000 { + compatible = "qcom,adreno-635.0", "qcom,adreno"; + reg = <0 0x03d00000 0 0x40000>, + <0 0x03d9e000 0 0x1000>, + <0 0x03d61000 0 0x800>; + reg-names = "kgsl_3d0_reg_memory", + "cx_mem", + "cx_dbgc"; + interrupts = ; + iommus = <&adreno_smmu 0 0x400>, + <&adreno_smmu 1 0x400>; + operating-points-v2 = <&gpu_opp_table>; + qcom,gmu = <&gmu>; + interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "gfx-mem"; + #cooling-cells = <2>; + + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + + status = "disabled"; + + gpu_zap_shader: zap-shader { + memory-region = <&gpu_zap_mem>; + }; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-315000000 { + opp-hz = /bits/ 64 <315000000>; + opp-level = ; + opp-peak-kBps = <1804000>; + opp-supported-hw = <0x17>; + }; + + opp-450000000 { + opp-hz = /bits/ 64 <450000000>; + opp-level = ; + opp-peak-kBps = <4068000>; + opp-supported-hw = <0x17>; + }; + + /* Only applicable for SKUs which has 550Mhz as Fmax */ + opp-550000000-0 { + opp-hz = /bits/ 64 <550000000>; + opp-level = ; + opp-peak-kBps = <8368000>; + opp-supported-hw = <0x01>; + }; + + opp-550000000-1 { + opp-hz = /bits/ 64 <550000000>; + opp-level = ; + opp-peak-kBps = <6832000>; + opp-supported-hw = <0x16>; + }; + + opp-608000000 { + opp-hz = /bits/ 64 <608000000>; + opp-level = ; + opp-peak-kBps = <8368000>; + opp-supported-hw = <0x16>; + }; + + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-level = ; + opp-peak-kBps = <8532000>; + opp-supported-hw = <0x06>; + }; + + opp-812000000 { + opp-hz = /bits/ 64 <812000000>; + opp-level = ; + opp-peak-kBps = <8532000>; + opp-supported-hw = <0x06>; + }; + + opp-840000000 { + opp-hz = /bits/ 64 <840000000>; + opp-level = ; + opp-peak-kBps = <8532000>; + opp-supported-hw = <0x02>; + }; + + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-level = ; + opp-peak-kBps = <8532000>; + opp-supported-hw = <0x02>; + }; + }; + }; + + gmu: gmu@3d6a000 { + compatible = "qcom,adreno-gmu-635.0", "qcom,adreno-gmu"; + reg = <0 0x03d6a000 0 0x34000>, + <0 0x3de0000 0 0x10000>, + <0 0x0b290000 0 0x10000>; + reg-names = "gmu", "rscc", "gmu_pdc"; + interrupts = , + ; + interrupt-names = "hfi", "gmu"; + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>; + clock-names = "gmu", + "cxo", + "axi", + "memnoc", + "ahb", + "hub", + "smmu_vote"; + power-domains = <&gpucc GPU_CC_CX_GDSC>, + <&gpucc GPU_CC_GX_GDSC>; + power-domain-names = "cx", + "gx"; + iommus = <&adreno_smmu 5 0x400>; + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = ; + }; + }; + }; + + gpucc: clock-controller@3d90000 { + compatible = "qcom,sc7280-gpucc"; + reg = <0 0x03d90000 0 0x9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + dma@117f000 { + compatible = "qcom,sc7280-dcc", "qcom,dcc"; + reg = <0x0 0x0117f000 0x0 0x1000>, + <0x0 0x01112000 0x0 0x6000>; + }; + + adreno_smmu: iommu@3da0000 { + compatible = "qcom,sc7280-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; + reg = <0 0x03da0000 0 0x20000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HUB_AON_CLK>; + clock-names = "gcc_gpu_memnoc_gfx_clk", + "gcc_gpu_snoc_dvm_gfx_clk", + "gpu_cc_ahb_clk", + "gpu_cc_hlos1_vote_gpu_smmu_clk", + "gpu_cc_cx_gmu_clk", + "gpu_cc_hub_cx_int_clk", + "gpu_cc_hub_aon_clk"; + + power-domains = <&gpucc GPU_CC_CX_GDSC>; + dma-coherent; + }; + + gfx_0_tbu: tbu@3dd9000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x3dd9000 0x0 0x1000>; + qcom,stream-id-range = <&adreno_smmu 0x0 0x400>; + }; + + gfx_1_tbu: tbu@3ddd000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x3ddd000 0x0 0x1000>; + qcom,stream-id-range = <&adreno_smmu 0x400 0x400>; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sc7280-mpss-pas"; + reg = <0 0x04080000 0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC7280_CX>, + <&rpmhpd SC7280_MSS>; + power-domain-names = "cx", "mss"; + + memory-region = <&mpss_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + label = "modem"; + qcom,remote-pid = <1>; + }; + }; + + stm@6002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0 0x06002000 0 0x1000>, + <0 0x16280000 0 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = <&funnel0_in7>; + }; + }; + }; + }; + + tpda@6004000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x06004000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1c { + reg = <0x1c>; + + qdss_tpda_in28: endpoint { + remote-endpoint = <&spdm_tpdm_out>; + }; + }; + }; + + out-ports { + port { + qdss_tpda_out: endpoint { + remote-endpoint = <&qdss_dl_funnel_in0>; + }; + }; + }; + }; + + funnel@6005000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x06005000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + qdss_dl_funnel_in0: endpoint { + remote-endpoint = <&qdss_tpda_out>; + }; + }; + }; + + out-ports { + port { + qdss_dl_funnel_out: endpoint { + remote-endpoint = <&funnel0_in6>; + }; + }; + }; + }; + + tpdm@600f000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x0600f000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + spdm_tpdm_out: endpoint { + remote-endpoint = <&qdss_tpda_in28>; + }; + }; + }; + }; + + cti@6010000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06010000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + funnel@6041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06041000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel0_out: endpoint { + remote-endpoint = <&merge_funnel_in0>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@6 { + reg = <6>; + + funnel0_in6: endpoint { + remote-endpoint = <&qdss_dl_funnel_out>; + }; + }; + + port@7 { + reg = <7>; + funnel0_in7: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + }; + + funnel@6042000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06042000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + funnel1_out: endpoint { + remote-endpoint = <&merge_funnel_in1>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + funnel1_in4: endpoint { + remote-endpoint = <&apss_merge_funnel_out>; + }; + }; + }; + }; + + funnel@6045000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06045000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + merge_funnel_out: endpoint { + remote-endpoint = <&swao_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + merge_funnel_in0: endpoint { + remote-endpoint = <&funnel0_out>; + }; + }; + + port@1 { + reg = <1>; + merge_funnel_in1: endpoint { + remote-endpoint = <&funnel1_out>; + }; + }; + }; + }; + + replicator@6046000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x06046000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + replicator_out: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + }; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = <&swao_replicator_out>; + }; + }; + }; + }; + + etr@6048000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06048000 0 0x1000>; + iommus = <&apps_smmu 0x04c0 0>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,scatter-gather; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = <&replicator_out>; + }; + }; + }; + }; + + cti@6b00000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06b00000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@6b01000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06b01000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@6b02000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06b02000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@6b03000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06b03000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + funnel@6b04000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x06b04000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + swao_funnel_out: endpoint { + remote-endpoint = <&etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@6 { + reg = <6>; + + swao_funnel_in6: endpoint { + remote-endpoint = <&aoss_tpda_out>; + }; + }; + + port@7 { + reg = <7>; + swao_funnel_in: endpoint { + remote-endpoint = <&merge_funnel_out>; + }; + }; + }; + }; + + etf@6b05000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x06b05000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + etf_out: endpoint { + remote-endpoint = <&swao_replicator_in>; + }; + }; + }; + + in-ports { + port { + etf_in: endpoint { + remote-endpoint = <&swao_funnel_out>; + }; + }; + }; + }; + + replicator@6b06000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0 0x06b06000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + qcom,replicator-loses-context; + + out-ports { + port { + swao_replicator_out: endpoint { + remote-endpoint = <&replicator_in>; + }; + }; + }; + + in-ports { + port { + swao_replicator_in: endpoint { + remote-endpoint = <&etf_out>; + }; + }; + }; + }; + + tpda@6b08000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x06b08000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + aoss_tpda_in0: endpoint { + remote-endpoint = <&swao_prio0_tpdm_out>; + }; + }; + + port@1 { + reg = <1>; + + aoss_tpda_in1: endpoint { + remote-endpoint = <&swao_prio1_tpdm_out>; + }; + }; + + port@2 { + reg = <2>; + + aoss_tpda_in2: endpoint { + remote-endpoint = <&swao_prio2_tpdm_out>; + }; + }; + + port@3 { + reg = <3>; + + aoss_tpda_in3: endpoint { + remote-endpoint = <&swao_prio3_tpdm_out>; + }; + }; + + port@4 { + reg = <4>; + + aoss_tpda_in4: endpoint { + remote-endpoint = <&swao_tpdm_out>; + }; + }; + }; + + out-ports { + port { + aoss_tpda_out: endpoint { + remote-endpoint = <&swao_funnel_in6>; + }; + }; + }; + }; + + tpdm@6b09000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x06b09000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + swao_prio0_tpdm_out: endpoint { + remote-endpoint = <&aoss_tpda_in0>; + }; + }; + }; + }; + + tpdm@6b0a000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x06b0a000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + swao_prio1_tpdm_out: endpoint { + remote-endpoint = <&aoss_tpda_in1>; + }; + }; + }; + }; + + tpdm@6b0b000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x06b0b000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + swao_prio2_tpdm_out: endpoint { + remote-endpoint = <&aoss_tpda_in2>; + }; + }; + }; + }; + + tpdm@6b0c000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x06b0c000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + swao_prio3_tpdm_out: endpoint { + remote-endpoint = <&aoss_tpda_in3>; + }; + }; + }; + }; + + tpdm@6b0d000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x06b0d000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + swao_tpdm_out: endpoint { + remote-endpoint = <&aoss_tpda_in4>; + }; + }; + }; + }; + + cti@6b11000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06b11000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + etm@7040000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07040000 0 0x1000>; + + cpu = <&cpu0>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&apss_funnel_in0>; + }; + }; + }; + }; + + etm@7140000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07140000 0 0x1000>; + + cpu = <&cpu1>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&apss_funnel_in1>; + }; + }; + }; + }; + + etm@7240000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07240000 0 0x1000>; + + cpu = <&cpu2>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&apss_funnel_in2>; + }; + }; + }; + }; + + etm@7340000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07340000 0 0x1000>; + + cpu = <&cpu3>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&apss_funnel_in3>; + }; + }; + }; + }; + + etm@7440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07440000 0 0x1000>; + + cpu = <&cpu4>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = <&apss_funnel_in4>; + }; + }; + }; + }; + + etm@7540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07540000 0 0x1000>; + + cpu = <&cpu5>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = <&apss_funnel_in5>; + }; + }; + }; + }; + + etm@7640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07640000 0 0x1000>; + + cpu = <&cpu6>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = <&apss_funnel_in6>; + }; + }; + }; + }; + + etm@7740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x07740000 0 0x1000>; + + cpu = <&cpu7>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = <&apss_funnel_in7>; + }; + }; + }; + }; + + funnel@7800000 { /* APSS Funnel */ + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07800000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_funnel_out: endpoint { + remote-endpoint = <&apss_merge_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + apss_funnel_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + apss_funnel_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + apss_funnel_in2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + apss_funnel_in3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + + port@4 { + reg = <4>; + apss_funnel_in4: endpoint { + remote-endpoint = <&etm4_out>; + }; + }; + + port@5 { + reg = <5>; + apss_funnel_in5: endpoint { + remote-endpoint = <&etm5_out>; + }; + }; + + port@6 { + reg = <6>; + apss_funnel_in6: endpoint { + remote-endpoint = <&etm6_out>; + }; + }; + + port@7 { + reg = <7>; + apss_funnel_in7: endpoint { + remote-endpoint = <&etm7_out>; + }; + }; + }; + }; + + funnel@7810000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0x07810000 0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + apss_merge_funnel_out: endpoint { + remote-endpoint = <&funnel1_in4>; + }; + }; + }; + + in-ports { + port { + apss_merge_funnel_in: endpoint { + remote-endpoint = <&apss_funnel_out>; + }; + }; + }; + }; + + sdhc_2: mmc@8804000 { + compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>; + pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>; + status = "disabled"; + + reg = <0 0x08804000 0 0x1000>; + + iommus = <&apps_smmu 0x100 0x0>; + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_2 0>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + + bus-width = <4>; + dma-coherent; + + qcom,dll-config = <0x0007642c>; + + resets = <&gcc GCC_SDCC2_BCR>; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <1800000 400000>; + opp-avg-kBps = <100000 0>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <5400000 1600000>; + opp-avg-kBps = <200000 0>; + }; + }; + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sc7280-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + }; + + usb_2_hsphy: phy@88e4000 { + compatible = "qcom,sc7280-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e4000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + }; + + refgen: regulator@88e7000 { + compatible = "qcom,sc7280-refgen-regulator", + "qcom,sm8250-refgen-regulator"; + reg = <0x0 0x088e7000 0x0 0x84>; + }; + + usb_1_qmpphy: phy@88e8000 { + compatible = "qcom,sc7280-qmp-usb3-dp-phy"; + reg = <0 0x088e8000 0 0x3000>; + status = "disabled"; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + #clock-cells = <1>; + #phy-cells = <1>; + + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_dp_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_dp_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + + port@2 { + reg = <2>; + + usb_dp_qmpphy_dp_in: endpoint { + remote-endpoint = <&mdss_dp_out>; + }; + }; + }; + }; + + usb_2: usb@8c00000 { + compatible = "qcom,sc7280-dwc3", "qcom,snps-dwc3"; + reg = <0 0x08c00000 0 0xfc100>; + status = "disabled"; + + clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, + <&gcc GCC_USB30_SEC_SLEEP_CLK>, + <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 12 IRQ_TYPE_EDGE_BOTH>, + <&pdc 13 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "dwc_usb3", + "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq"; + + power-domains = <&gcc GCC_USB30_SEC_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_SEC_BCR>; + + interconnects = <&aggre1_noc MASTER_USB2 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_USB2 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + iommus = <&apps_smmu 0xa0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + phys = <&usb_2_hsphy>; + phy-names = "usb2-phy"; + maximum-speed = "high-speed"; + usb-role-switch; + + port { + usb2_role_switch: endpoint { + remote-endpoint = <&eud_ep>; + }; + }; + }; + + qspi: spi@88dc000 { + compatible = "qcom,sc7280-qspi", "qcom,qspi-v1"; + reg = <0 0x088dc000 0 0x1000>; + iommus = <&apps_smmu 0x20 0x0>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <&gcc GCC_QSPI_CORE_CLK>; + clock-names = "iface", "core"; + interconnects = <&gem_noc MASTER_APPSS_PROC 0 + &cnoc2 SLAVE_QSPI_0 0>; + interconnect-names = "qspi-config"; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qspi_opp_table>; + status = "disabled"; + }; + + remoteproc_adsp: remoteproc@3700000 { + compatible = "qcom,sc7280-adsp-pas"; + reg = <0 0x03700000 0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC7280_LCX>, + <&rpmhpd SC7280_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + + apr { + compatible = "qcom,apr-v2"; + qcom,glink-channels = "apr_audio_svc"; + qcom,domain = ; + #address-cells = <1>; + #size-cells = <0>; + + service@3 { + reg = ; + compatible = "qcom,q6core"; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + + q6afe: service@4 { + compatible = "qcom,q6afe"; + reg = ; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + + q6afecc: clock-controller { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + + q6usbdai: usbd { + compatible = "qcom,q6usb"; + iommus = <&apps_smmu 0x180f 0x0>; + #sound-dai-cells = <1>; + qcom,usb-audio-intr-idx = /bits/ 16 <2>; + }; + }; + + q6asm: service@7 { + compatible = "qcom,q6asm"; + reg = ; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x1801 0x0>; + + dai@0 { + reg = ; + }; + + dai@1 { + reg = ; + }; + + dai@2 { + reg = ; + }; + }; + }; + + q6adm: service@8 { + compatible = "qcom,q6adm"; + reg = ; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1803 0x0>; + dma-coherent; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1804 0x0>; + dma-coherent; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1805 0x0>; + dma-coherent; + }; + }; + }; + }; + + remoteproc_wpss: remoteproc@8a00000 { + compatible = "qcom,sc7280-wpss-pas"; + reg = <0 0x08a00000 0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&wpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC7280_CX>, + <&rpmhpd SC7280_MX>; + power-domain-names = "cx", "mx"; + + memory-region = <&wpss_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&wpss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_WPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_WPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "wpss"; + qcom,remote-pid = <13>; + }; + }; + + pmu@9091000 { + compatible = "qcom,sc7280-llcc-bwmon"; + reg = <0 0x09091000 0 0x1000>; + + interrupts = ; + + interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>; + + operating-points-v2 = <&llcc_bwmon_opp_table>; + + llcc_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <800000>; + }; + opp-1 { + opp-peak-kBps = <1804000>; + }; + opp-2 { + opp-peak-kBps = <2188000>; + }; + opp-3 { + opp-peak-kBps = <3072000>; + }; + opp-4 { + opp-peak-kBps = <4068000>; + }; + opp-5 { + opp-peak-kBps = <6220000>; + }; + opp-6 { + opp-peak-kBps = <6832000>; + }; + opp-7 { + opp-peak-kBps = <8532000>; + }; + opp-8 { + opp-peak-kBps = <10944000>; + }; + opp-9 { + opp-peak-kBps = <12787200>; + }; + }; + }; + + pmu@90b6400 { + compatible = "qcom,sc7280-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0 0x090b6400 0 0x600>; + + interrupts = ; + + interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>; + operating-points-v2 = <&cpu_bwmon_opp_table>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <2400000>; + }; + opp-1 { + opp-peak-kBps = <4800000>; + }; + opp-2 { + opp-peak-kBps = <7456000>; + }; + opp-3 { + opp-peak-kBps = <9600000>; + }; + opp-4 { + opp-peak-kBps = <12896000>; + }; + opp-5 { + opp-peak-kBps = <14928000>; + }; + opp-6 { + opp-peak-kBps = <17056000>; + }; + }; + }; + + dc_noc: interconnect@90e0000 { + reg = <0 0x090e0000 0 0x5080>; + compatible = "qcom,sc7280-dc-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect@9100000 { + reg = <0 0x09100000 0 0xe2200>; + compatible = "qcom,sc7280-gem-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system-cache-controller@9200000 { + compatible = "qcom,sc7280-llcc"; + reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>, + <0 0x09600000 0 0x58000>; + reg-names = "llcc0_base", "llcc1_base", "llcc_broadcast_base"; + interrupts = ; + }; + + eud: eud@88e0000 { + compatible = "qcom,sc7280-eud", "qcom,eud"; + reg = <0 0x88e0000 0 0x2000>, + <0 0x88e2000 0 0x1000>; + interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + eud_ep: endpoint { + remote-endpoint = <&usb2_role_switch>; + }; + }; + }; + }; + + nsp_noc: interconnect@a0c0000 { + reg = <0 0x0a0c0000 0 0x10000>; + compatible = "qcom,sc7280-nsp-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + remoteproc_cdsp: remoteproc@a300000 { + compatible = "qcom,sc7280-cdsp-pas"; + reg = <0 0x0a300000 0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC7280_CX>, + <&rpmhpd SC7280_MX>; + power-domain-names = "cx", "mx"; + + interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>; + + memory-region = <&cdsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "cdsp"; + qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x11a1 0x0420>, + <&apps_smmu 0x1181 0x0420>; + dma-coherent; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x11a2 0x0420>, + <&apps_smmu 0x1182 0x0420>; + dma-coherent; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x11a3 0x0420>, + <&apps_smmu 0x1183 0x0420>; + dma-coherent; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x11a4 0x0420>, + <&apps_smmu 0x1184 0x0420>; + dma-coherent; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x11a5 0x0420>, + <&apps_smmu 0x1185 0x0420>; + dma-coherent; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x11a6 0x0420>, + <&apps_smmu 0x1186 0x0420>; + dma-coherent; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x11a7 0x0420>, + <&apps_smmu 0x1187 0x0420>; + dma-coherent; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x11a8 0x0420>, + <&apps_smmu 0x1188 0x0420>; + dma-coherent; + }; + + /* note: secure cb9 in downstream */ + + compute-cb@11 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <11>; + iommus = <&apps_smmu 0x11ab 0x0420>, + <&apps_smmu 0x118b 0x0420>; + dma-coherent; + }; + + compute-cb@12 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <12>; + iommus = <&apps_smmu 0x11ac 0x0420>, + <&apps_smmu 0x118c 0x0420>; + dma-coherent; + }; + + compute-cb@13 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <13>; + iommus = <&apps_smmu 0x11ad 0x0420>, + <&apps_smmu 0x118d 0x0420>; + dma-coherent; + }; + + compute-cb@14 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <14>; + iommus = <&apps_smmu 0x11ae 0x0420>, + <&apps_smmu 0x118e 0x0420>; + dma-coherent; + }; + }; + }; + }; + + usb_1: usb@a600000 { + compatible = "qcom,sc7280-dwc3", "qcom,snps-dwc3"; + reg = <0 0x0a600000 0 0xfc100>; + status = "disabled"; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dwc_usb3", + "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_USB3_0 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + wakeup-source; + + iommus = <&apps_smmu 0xe0 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,parkmode-disable-ss-quirk; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + num-hc-interrupters = /bits/ 16 <3>; + phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", "usb3-phy"; + maximum-speed = "super-speed"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; + }; + }; + }; + }; + + venus: video-codec@aa00000 { + compatible = "qcom,sc7280-venus"; + reg = <0 0x0aa00000 0 0xd0600>; + interrupts = ; + + clocks = <&videocc VIDEO_CC_MVSC_CORE_CLK>, + <&videocc VIDEO_CC_MVSC_CTL_AXI_CLK>, + <&videocc VIDEO_CC_VENUS_AHB_CLK>, + <&videocc VIDEO_CC_MVS0_CORE_CLK>, + <&videocc VIDEO_CC_MVS0_AXI_CLK>; + clock-names = "core", "bus", "iface", + "vcodec_core", "vcodec_bus"; + + power-domains = <&videocc MVSC_GDSC>, + <&videocc MVS0_GDSC>, + <&rpmhpd SC7280_CX>; + power-domain-names = "venus", "vcodec0", "cx"; + operating-points-v2 = <&venus_opp_table>; + + interconnects = <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_VENUS_CFG 0>, + <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "cpu-cfg", "video-mem"; + + iommus = <&apps_smmu 0x2180 0x20>; + memory-region = <&video_mem>; + + status = "disabled"; + + venus_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-133330000 { + opp-hz = /bits/ 64 <133330000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-240000000 { + opp-hz = /bits/ 64 <240000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-335000000 { + opp-hz = /bits/ 64 <335000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-424000000 { + opp-hz = /bits/ 64 <424000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-460000048 { + opp-hz = /bits/ 64 <460000048>; + required-opps = <&rpmhpd_opp_turbo>; + }; + }; + }; + + videocc: clock-controller@aaf0000 { + compatible = "qcom,sc7280-videocc"; + reg = <0 0x0aaf0000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>; + clock-names = "bi_tcxo", "bi_tcxo_ao"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + cci0: cci@ac4a000 { + compatible = "qcom,sc7280-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac4a000 0 0x1000>; + interrupts = ; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_0_CLK>, + <&camcc CAM_CC_CCI_0_CLK_SRC>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + pinctrl-0 = <&cci0_default &cci1_default>; + pinctrl-1 = <&cci0_sleep &cci1_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + cci0_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci0_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci1: cci@ac4b000 { + compatible = "qcom,sc7280-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac4b000 0 0x1000>; + interrupts = ; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_1_CLK>, + <&camcc CAM_CC_CCI_1_CLK_SRC>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + pinctrl-0 = <&cci2_default &cci3_default>; + pinctrl-1 = <&cci2_sleep &cci3_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + cci1_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci1_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + camss: isp@acb3000 { + compatible = "qcom,sc7280-camss"; + + reg = <0x0 0x0acb3000 0x0 0x1000>, + <0x0 0x0acba000 0x0 0x1000>, + <0x0 0x0acc1000 0x0 0x1000>, + <0x0 0x0acc8000 0x0 0x1000>, + <0x0 0x0accf000 0x0 0x1000>, + <0x0 0x0ace0000 0x0 0x2000>, + <0x0 0x0ace2000 0x0 0x2000>, + <0x0 0x0ace4000 0x0 0x2000>, + <0x0 0x0ace6000 0x0 0x2000>, + <0x0 0x0ace8000 0x0 0x2000>, + <0x0 0x0acaf000 0x0 0x4000>, + <0x0 0x0acb6000 0x0 0x4000>, + <0x0 0x0acbd000 0x0 0x4000>, + <0x0 0x0acc4000 0x0 0x4000>, + <0x0 0x0accb000 0x0 0x4000>; + reg-names = "csid0", + "csid1", + "csid2", + "csid_lite0", + "csid_lite1", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "csiphy4", + "vfe0", + "vfe1", + "vfe2", + "vfe_lite0", + "vfe_lite1"; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CSIPHY0_CLK>, + <&camcc CAM_CC_CSI0PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY1_CLK>, + <&camcc CAM_CC_CSI1PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY2_CLK>, + <&camcc CAM_CC_CSI2PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY3_CLK>, + <&camcc CAM_CC_CSI3PHYTIMER_CLK>, + <&camcc CAM_CC_CSIPHY4_CLK>, + <&camcc CAM_CC_CSI4PHYTIMER_CLK>, + <&gcc GCC_CAMERA_HF_AXI_CLK>, + <&gcc GCC_CAMERA_SF_AXI_CLK>, + <&camcc CAM_CC_ICP_AHB_CLK>, + <&camcc CAM_CC_IFE_0_CLK>, + <&camcc CAM_CC_IFE_0_AXI_CLK>, + <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_0_CSID_CLK>, + <&camcc CAM_CC_IFE_1_CLK>, + <&camcc CAM_CC_IFE_1_AXI_CLK>, + <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_1_CSID_CLK>, + <&camcc CAM_CC_IFE_2_CLK>, + <&camcc CAM_CC_IFE_2_AXI_CLK>, + <&camcc CAM_CC_IFE_2_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_2_CSID_CLK>, + <&camcc CAM_CC_IFE_LITE_0_CLK>, + <&camcc CAM_CC_IFE_LITE_0_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_LITE_0_CSID_CLK>, + <&camcc CAM_CC_IFE_LITE_1_CLK>, + <&camcc CAM_CC_IFE_LITE_1_CPHY_RX_CLK>, + <&camcc CAM_CC_IFE_LITE_1_CSID_CLK>; + clock-names = "camnoc_axi", + "cpas_ahb", + "csiphy0", + "csiphy0_timer", + "csiphy1", + "csiphy1_timer", + "csiphy2", + "csiphy2_timer", + "csiphy3", + "csiphy3_timer", + "csiphy4", + "csiphy4_timer", + "gcc_axi_hf", + "gcc_axi_sf", + "icp_ahb", + "vfe0", + "vfe0_axi", + "vfe0_cphy_rx", + "vfe0_csid", + "vfe1", + "vfe1_axi", + "vfe1_cphy_rx", + "vfe1_csid", + "vfe2", + "vfe2_axi", + "vfe2_cphy_rx", + "vfe2_csid", + "vfe_lite0", + "vfe_lite0_cphy_rx", + "vfe_lite0_csid", + "vfe_lite1", + "vfe_lite1_cphy_rx", + "vfe_lite1_csid"; + + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + interrupt-names = "csid0", + "csid1", + "csid2", + "csid_lite0", + "csid_lite1", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "csiphy4", + "vfe0", + "vfe1", + "vfe2", + "vfe_lite0", + "vfe_lite1"; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc2 SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>, + <&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "ahb", + "hf_0"; + + iommus = <&apps_smmu 0x800 0x4e0>; + + power-domains = <&camcc CAM_CC_IFE_0_GDSC>, + <&camcc CAM_CC_IFE_1_GDSC>, + <&camcc CAM_CC_IFE_2_GDSC>, + <&camcc CAM_CC_TITAN_TOP_GDSC>; + power-domain-names = "ife0", + "ife1", + "ife2", + "top"; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + }; + + port@2 { + reg = <2>; + }; + + port@3 { + reg = <3>; + }; + + port@4 { + reg = <4>; + }; + }; + }; + + camcc: clock-controller@ad00000 { + compatible = "qcom,sc7280-camcc"; + reg = <0 0x0ad00000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sc7280-dispcc"; + reg = <0 0x0af00000 0 0x20000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_DISP_GPLL0_CLK_SRC>, + <&mdss_dsi_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi_phy DSI_PIXEL_PLL_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&mdss_edp_phy 0>, + <&mdss_edp_phy 1>; + clock-names = "bi_tcxo", + "gcc_disp_gpll0_clk", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dp_phy_pll_link_clk", + "dp_phy_pll_vco_div_clk", + "edp_phy_pll_link_clk", + "edp_phy_pll_vco_div_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + mdss: display-subsystem@ae00000 { + compatible = "qcom,sc7280-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "ahb", + "core"; + + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &cnoc2 SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; + + iommus = <&apps_smmu 0x900 0x402>; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,sc7280-dpu"; + reg = <0 0x0ae01000 0 0x8f030>, + <0 0x0aeb0000 0 0x3000>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&gcc GCC_DISP_SF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>; + assigned-clock-rates = <19200000>, + <19200000>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SC7280_CX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf5_out: endpoint { + remote-endpoint = <&edp_in>; + }; + }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&dp_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-380000000 { + opp-hz = /bits/ 64 <380000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-506666667 { + opp-hz = /bits/ 64 <506666667>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-608000000 { + opp-hz = /bits/ 64 <608000000>; + required-opps = <&rpmhpd_opp_turbo>; + }; + }; + }; + + mdss_dsi: dsi@ae94000 { + compatible = "qcom,sc7280-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi_phy DSI_PIXEL_PLL_CLK>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SC7280_CX>; + + phys = <&mdss_dsi_phy>; + + refgen-supply = <&refgen>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi_phy: phy@ae94400 { + compatible = "qcom,sc7280-dsi-phy-7nm"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94900 0 0x280>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss_edp: edp@aea0000 { + compatible = "qcom,sc7280-edp"; + pinctrl-names = "default"; + pinctrl-0 = <&edp_hot_plug_det>; + + reg = <0 0x0aea0000 0 0x200>, + <0 0x0aea0200 0 0x200>, + <0 0x0aea0400 0 0xc00>, + <0 0x0aea1000 0 0x400>, + <0 0x0aea1400 0 0x400>; + + interrupt-parent = <&mdss>; + interrupts = <14>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&mdss_edp_phy 0>, <&mdss_edp_phy 1>; + + phys = <&mdss_edp_phy>; + phy-names = "dp"; + + operating-points-v2 = <&edp_opp_table>; + power-domains = <&rpmhpd SC7280_CX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + edp_in: endpoint { + remote-endpoint = <&dpu_intf5_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_edp_out: endpoint { }; + }; + }; + + edp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_edp_phy: phy@aec2a00 { + compatible = "qcom,sc7280-edp-phy"; + + reg = <0 0x0aec2a00 0 0x19c>, + <0 0x0aec2200 0 0xa0>, + <0 0x0aec2600 0 0xa0>, + <0 0x0aec2000 0 0x1c0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_EDP_CLKREF_EN>; + clock-names = "aux", + "cfg_ahb"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss_dp: displayport-controller@ae90000 { + compatible = "qcom,sc7280-dp"; + + reg = <0 0x0ae90000 0 0x200>, + <0 0x0ae90200 0 0x200>, + <0 0x0ae90400 0 0xc00>, + <0 0x0ae91000 0 0x400>, + <0 0x0ae91400 0 0x400>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SC7280_CX>; + + #sound-dai-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dp_out: endpoint { + remote-endpoint = <&usb_dp_qmpphy_dp_in>; + }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sc7280-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>; + qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>, + <55 306 4>, <59 312 3>, <62 374 2>, + <64 434 2>, <66 438 3>, <69 86 1>, + <70 520 54>, <124 609 31>, <155 63 1>, + <156 716 12>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + pdc_reset: reset-controller@b5e0000 { + compatible = "qcom,sc7280-pdc-global"; + reg = <0 0x0b5e0000 0 0x20000>; + #reset-cells = <1>; + status = "reserved"; /* Owned by firmware */ + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sc7280-tsens","qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x1ff>; /* SROT */ + #qcom,sensors = <15>; + interrupts = , + ; + interrupt-names = "uplow","critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sc7280-tsens","qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x1ff>; /* SROT */ + #qcom,sensors = <12>; + interrupts = , + ; + interrupt-names = "uplow","critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_reset: reset-controller@c2a0000 { + compatible = "qcom,sc7280-aoss-cc", "qcom,sdm845-aoss-cc"; + reg = <0 0x0c2a0000 0 0x31000>; + #reset-cells = <1>; + }; + + aoss_qmp: power-management@c300000 { + compatible = "qcom,sc7280-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0x0c440000 0 0x1100>, + <0 0x0c600000 0 0x2000000>, + <0 0x0e600000 0 0x100000>, + <0 0x0e700000 0 0xa0000>, + <0 0x0c40a000 0 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sc7280-pinctrl"; + reg = <0 0x0f100000 0 0x300000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 175>; + wakeup-parent = <&pdc>; + + cci0_default: cci0-default-state { + pins = "gpio69", "gpio70"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci0_sleep: cci0-sleep-state { + pins = "gpio69", "gpio70"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci1_default: cci1-default-state { + pins = "gpio71", "gpio72"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci1_sleep: cci1-sleep-state { + pins = "gpio71", "gpio72"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci2_default: cci2-default-state { + pins = "gpio73", "gpio74"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci2_sleep: cci2-sleep-state { + pins = "gpio73", "gpio74"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci3_default: cci3-default-state { + pins = "gpio75", "gpio76"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci3_sleep: cci3-sleep-state { + pins = "gpio75", "gpio76"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + dp_hot_plug_det: dp-hot-plug-det-state { + pins = "gpio47"; + function = "dp_hot"; + }; + + edp_hot_plug_det: edp-hot-plug-det-state { + pins = "gpio60"; + function = "edp_hot"; + }; + + mi2s0_data0: mi2s0-data0-state { + pins = "gpio98"; + function = "mi2s0_data0"; + }; + + mi2s0_data1: mi2s0-data1-state { + pins = "gpio99"; + function = "mi2s0_data1"; + }; + + mi2s0_mclk: mi2s0-mclk-state { + pins = "gpio96"; + function = "pri_mi2s"; + }; + + mi2s0_sclk: mi2s0-sclk-state { + pins = "gpio97"; + function = "mi2s0_sck"; + }; + + mi2s0_ws: mi2s0-ws-state { + pins = "gpio100"; + function = "mi2s0_ws"; + }; + + mi2s1_data0: mi2s1-data0-state { + pins = "gpio107"; + function = "mi2s1_data0"; + }; + + mi2s1_sclk: mi2s1-sclk-state { + pins = "gpio106"; + function = "mi2s1_sck"; + }; + + mi2s1_ws: mi2s1-ws-state { + pins = "gpio108"; + function = "mi2s1_ws"; + }; + + pcie0_clkreq_n: pcie0-clkreq-n-state { + pins = "gpio88"; + function = "pcie0_clkreqn"; + }; + + pcie1_clkreq_n: pcie1-clkreq-n-state { + pins = "gpio79"; + function = "pcie1_clkreqn"; + }; + + qspi_clk: qspi-clk-state { + pins = "gpio14"; + function = "qspi_clk"; + }; + + qspi_cs0: qspi-cs0-state { + pins = "gpio15"; + function = "qspi_cs"; + }; + + qspi_cs1: qspi-cs1-state { + pins = "gpio19"; + function = "qspi_cs"; + }; + + qspi_data0: qspi-data0-state { + pins = "gpio12"; + function = "qspi_data"; + }; + + qspi_data1: qspi-data1-state { + pins = "gpio13"; + function = "qspi_data"; + }; + + qspi_data23: qspi-data23-state { + pins = "gpio16", "gpio17"; + function = "qspi_data"; + }; + + qup_i2c0_data_clk: qup-i2c0-data-clk-state { + pins = "gpio0", "gpio1"; + function = "qup00"; + }; + + qup_i2c1_data_clk: qup-i2c1-data-clk-state { + pins = "gpio4", "gpio5"; + function = "qup01"; + }; + + qup_i2c2_data_clk: qup-i2c2-data-clk-state { + pins = "gpio8", "gpio9"; + function = "qup02"; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk-state { + pins = "gpio12", "gpio13"; + function = "qup03"; + }; + + qup_i2c4_data_clk: qup-i2c4-data-clk-state { + pins = "gpio16", "gpio17"; + function = "qup04"; + }; + + qup_i2c5_data_clk: qup-i2c5-data-clk-state { + pins = "gpio20", "gpio21"; + function = "qup05"; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk-state { + pins = "gpio24", "gpio25"; + function = "qup06"; + }; + + qup_i2c7_data_clk: qup-i2c7-data-clk-state { + pins = "gpio28", "gpio29"; + function = "qup07"; + }; + + qup_i2c8_data_clk: qup-i2c8-data-clk-state { + pins = "gpio32", "gpio33"; + function = "qup10"; + }; + + qup_i2c9_data_clk: qup-i2c9-data-clk-state { + pins = "gpio36", "gpio37"; + function = "qup11"; + }; + + qup_i2c10_data_clk: qup-i2c10-data-clk-state { + pins = "gpio40", "gpio41"; + function = "qup12"; + }; + + qup_i2c11_data_clk: qup-i2c11-data-clk-state { + pins = "gpio44", "gpio45"; + function = "qup13"; + }; + + qup_i2c12_data_clk: qup-i2c12-data-clk-state { + pins = "gpio48", "gpio49"; + function = "qup14"; + }; + + qup_i2c13_data_clk: qup-i2c13-data-clk-state { + pins = "gpio52", "gpio53"; + function = "qup15"; + }; + + qup_i2c14_data_clk: qup-i2c14-data-clk-state { + pins = "gpio56", "gpio57"; + function = "qup16"; + }; + + qup_i2c15_data_clk: qup-i2c15-data-clk-state { + pins = "gpio60", "gpio61"; + function = "qup17"; + }; + + qup_spi0_data_clk: qup-spi0-data-clk-state { + pins = "gpio0", "gpio1", "gpio2"; + function = "qup00"; + }; + + qup_spi0_cs: qup-spi0-cs-state { + pins = "gpio3"; + function = "qup00"; + }; + + qup_spi0_cs_gpio: qup-spi0-cs-gpio-state { + pins = "gpio3"; + function = "gpio"; + }; + + qup_spi1_data_clk: qup-spi1-data-clk-state { + pins = "gpio4", "gpio5", "gpio6"; + function = "qup01"; + }; + + qup_spi1_cs: qup-spi1-cs-state { + pins = "gpio7"; + function = "qup01"; + }; + + qup_spi1_cs_gpio: qup-spi1-cs-gpio-state { + pins = "gpio7"; + function = "gpio"; + }; + + qup_spi2_data_clk: qup-spi2-data-clk-state { + pins = "gpio8", "gpio9", "gpio10"; + function = "qup02"; + }; + + qup_spi2_cs: qup-spi2-cs-state { + pins = "gpio11"; + function = "qup02"; + }; + + qup_spi2_cs_gpio: qup-spi2-cs-gpio-state { + pins = "gpio11"; + function = "gpio"; + }; + + qup_spi3_data_clk: qup-spi3-data-clk-state { + pins = "gpio12", "gpio13", "gpio14"; + function = "qup03"; + }; + + qup_spi3_cs: qup-spi3-cs-state { + pins = "gpio15"; + function = "qup03"; + }; + + qup_spi3_cs_gpio: qup-spi3-cs-gpio-state { + pins = "gpio15"; + function = "gpio"; + }; + + qup_spi4_data_clk: qup-spi4-data-clk-state { + pins = "gpio16", "gpio17", "gpio18"; + function = "qup04"; + }; + + qup_spi4_cs: qup-spi4-cs-state { + pins = "gpio19"; + function = "qup04"; + }; + + qup_spi4_cs_gpio: qup-spi4-cs-gpio-state { + pins = "gpio19"; + function = "gpio"; + }; + + qup_spi5_data_clk: qup-spi5-data-clk-state { + pins = "gpio20", "gpio21", "gpio22"; + function = "qup05"; + }; + + qup_spi5_cs: qup-spi5-cs-state { + pins = "gpio23"; + function = "qup05"; + }; + + qup_spi5_cs_gpio: qup-spi5-cs-gpio-state { + pins = "gpio23"; + function = "gpio"; + }; + + qup_spi6_data_clk: qup-spi6-data-clk-state { + pins = "gpio24", "gpio25", "gpio26"; + function = "qup06"; + }; + + qup_spi6_cs: qup-spi6-cs-state { + pins = "gpio27"; + function = "qup06"; + }; + + qup_spi6_cs_gpio: qup-spi6-cs-gpio-state { + pins = "gpio27"; + function = "gpio"; + }; + + qup_spi7_data_clk: qup-spi7-data-clk-state { + pins = "gpio28", "gpio29", "gpio30"; + function = "qup07"; + }; + + qup_spi7_cs: qup-spi7-cs-state { + pins = "gpio31"; + function = "qup07"; + }; + + qup_spi7_cs_gpio: qup-spi7-cs-gpio-state { + pins = "gpio31"; + function = "gpio"; + }; + + qup_spi8_data_clk: qup-spi8-data-clk-state { + pins = "gpio32", "gpio33", "gpio34"; + function = "qup10"; + }; + + qup_spi8_cs: qup-spi8-cs-state { + pins = "gpio35"; + function = "qup10"; + }; + + qup_spi8_cs_gpio: qup-spi8-cs-gpio-state { + pins = "gpio35"; + function = "gpio"; + }; + + qup_spi9_data_clk: qup-spi9-data-clk-state { + pins = "gpio36", "gpio37", "gpio38"; + function = "qup11"; + }; + + qup_spi9_cs: qup-spi9-cs-state { + pins = "gpio39"; + function = "qup11"; + }; + + qup_spi9_cs_gpio: qup-spi9-cs-gpio-state { + pins = "gpio39"; + function = "gpio"; + }; + + qup_spi10_data_clk: qup-spi10-data-clk-state { + pins = "gpio40", "gpio41", "gpio42"; + function = "qup12"; + }; + + qup_spi10_cs: qup-spi10-cs-state { + pins = "gpio43"; + function = "qup12"; + }; + + qup_spi10_cs_gpio: qup-spi10-cs-gpio-state { + pins = "gpio43"; + function = "gpio"; + }; + + qup_spi11_data_clk: qup-spi11-data-clk-state { + pins = "gpio44", "gpio45", "gpio46"; + function = "qup13"; + }; + + qup_spi11_cs: qup-spi11-cs-state { + pins = "gpio47"; + function = "qup13"; + }; + + qup_spi11_cs_gpio: qup-spi11-cs-gpio-state { + pins = "gpio47"; + function = "gpio"; + }; + + qup_spi12_data_clk: qup-spi12-data-clk-state { + pins = "gpio48", "gpio49", "gpio50"; + function = "qup14"; + }; + + qup_spi12_cs: qup-spi12-cs-state { + pins = "gpio51"; + function = "qup14"; + }; + + qup_spi12_cs_gpio: qup-spi12-cs-gpio-state { + pins = "gpio51"; + function = "gpio"; + }; + + qup_spi13_data_clk: qup-spi13-data-clk-state { + pins = "gpio52", "gpio53", "gpio54"; + function = "qup15"; + }; + + qup_spi13_cs: qup-spi13-cs-state { + pins = "gpio55"; + function = "qup15"; + }; + + qup_spi13_cs_gpio: qup-spi13-cs-gpio-state { + pins = "gpio55"; + function = "gpio"; + }; + + qup_spi14_data_clk: qup-spi14-data-clk-state { + pins = "gpio56", "gpio57", "gpio58"; + function = "qup16"; + }; + + qup_spi14_cs: qup-spi14-cs-state { + pins = "gpio59"; + function = "qup16"; + }; + + qup_spi14_cs_gpio: qup-spi14-cs-gpio-state { + pins = "gpio59"; + function = "gpio"; + }; + + qup_spi15_data_clk: qup-spi15-data-clk-state { + pins = "gpio60", "gpio61", "gpio62"; + function = "qup17"; + }; + + qup_spi15_cs: qup-spi15-cs-state { + pins = "gpio63"; + function = "qup17"; + }; + + qup_spi15_cs_gpio: qup-spi15-cs-gpio-state { + pins = "gpio63"; + function = "gpio"; + }; + + qup_uart0_cts: qup-uart0-cts-state { + pins = "gpio0"; + function = "qup00"; + }; + + qup_uart0_rts: qup-uart0-rts-state { + pins = "gpio1"; + function = "qup00"; + }; + + qup_uart0_tx: qup-uart0-tx-state { + pins = "gpio2"; + function = "qup00"; + }; + + qup_uart0_rx: qup-uart0-rx-state { + pins = "gpio3"; + function = "qup00"; + }; + + qup_uart1_cts: qup-uart1-cts-state { + pins = "gpio4"; + function = "qup01"; + }; + + qup_uart1_rts: qup-uart1-rts-state { + pins = "gpio5"; + function = "qup01"; + }; + + qup_uart1_tx: qup-uart1-tx-state { + pins = "gpio6"; + function = "qup01"; + }; + + qup_uart1_rx: qup-uart1-rx-state { + pins = "gpio7"; + function = "qup01"; + }; + + qup_uart2_cts: qup-uart2-cts-state { + pins = "gpio8"; + function = "qup02"; + }; + + qup_uart2_rts: qup-uart2-rts-state { + pins = "gpio9"; + function = "qup02"; + }; + + qup_uart2_tx: qup-uart2-tx-state { + pins = "gpio10"; + function = "qup02"; + }; + + qup_uart2_rx: qup-uart2-rx-state { + pins = "gpio11"; + function = "qup02"; + }; + + qup_uart3_cts: qup-uart3-cts-state { + pins = "gpio12"; + function = "qup03"; + }; + + qup_uart3_rts: qup-uart3-rts-state { + pins = "gpio13"; + function = "qup03"; + }; + + qup_uart3_tx: qup-uart3-tx-state { + pins = "gpio14"; + function = "qup03"; + }; + + qup_uart3_rx: qup-uart3-rx-state { + pins = "gpio15"; + function = "qup03"; + }; + + qup_uart4_cts: qup-uart4-cts-state { + pins = "gpio16"; + function = "qup04"; + }; + + qup_uart4_rts: qup-uart4-rts-state { + pins = "gpio17"; + function = "qup04"; + }; + + qup_uart4_tx: qup-uart4-tx-state { + pins = "gpio18"; + function = "qup04"; + }; + + qup_uart4_rx: qup-uart4-rx-state { + pins = "gpio19"; + function = "qup04"; + }; + + qup_uart5_tx: qup-uart5-tx-state { + pins = "gpio22"; + function = "qup05"; + }; + + qup_uart5_rx: qup-uart5-rx-state { + pins = "gpio23"; + function = "qup05"; + }; + + qup_uart6_cts: qup-uart6-cts-state { + pins = "gpio24"; + function = "qup06"; + }; + + qup_uart6_rts: qup-uart6-rts-state { + pins = "gpio25"; + function = "qup06"; + }; + + qup_uart6_tx: qup-uart6-tx-state { + pins = "gpio26"; + function = "qup06"; + }; + + qup_uart6_rx: qup-uart6-rx-state { + pins = "gpio27"; + function = "qup06"; + }; + + qup_uart7_cts: qup-uart7-cts-state { + pins = "gpio28"; + function = "qup07"; + }; + + qup_uart7_rts: qup-uart7-rts-state { + pins = "gpio29"; + function = "qup07"; + }; + + qup_uart7_tx: qup-uart7-tx-state { + pins = "gpio30"; + function = "qup07"; + }; + + qup_uart7_rx: qup-uart7-rx-state { + pins = "gpio31"; + function = "qup07"; + }; + + qup_uart8_cts: qup-uart8-cts-state { + pins = "gpio32"; + function = "qup10"; + }; + + qup_uart8_rts: qup-uart8-rts-state { + pins = "gpio33"; + function = "qup10"; + }; + + qup_uart8_tx: qup-uart8-tx-state { + pins = "gpio34"; + function = "qup10"; + }; + + qup_uart8_rx: qup-uart8-rx-state { + pins = "gpio35"; + function = "qup10"; + }; + + qup_uart9_cts: qup-uart9-cts-state { + pins = "gpio36"; + function = "qup11"; + }; + + qup_uart9_rts: qup-uart9-rts-state { + pins = "gpio37"; + function = "qup11"; + }; + + qup_uart9_tx: qup-uart9-tx-state { + pins = "gpio38"; + function = "qup11"; + }; + + qup_uart9_rx: qup-uart9-rx-state { + pins = "gpio39"; + function = "qup11"; + }; + + qup_uart10_cts: qup-uart10-cts-state { + pins = "gpio40"; + function = "qup12"; + }; + + qup_uart10_rts: qup-uart10-rts-state { + pins = "gpio41"; + function = "qup12"; + }; + + qup_uart10_tx: qup-uart10-tx-state { + pins = "gpio42"; + function = "qup12"; + }; + + qup_uart10_rx: qup-uart10-rx-state { + pins = "gpio43"; + function = "qup12"; + }; + + qup_uart11_cts: qup-uart11-cts-state { + pins = "gpio44"; + function = "qup13"; + }; + + qup_uart11_rts: qup-uart11-rts-state { + pins = "gpio45"; + function = "qup13"; + }; + + qup_uart11_tx: qup-uart11-tx-state { + pins = "gpio46"; + function = "qup13"; + }; + + qup_uart11_rx: qup-uart11-rx-state { + pins = "gpio47"; + function = "qup13"; + }; + + qup_uart12_cts: qup-uart12-cts-state { + pins = "gpio48"; + function = "qup14"; + }; + + qup_uart12_rts: qup-uart12-rts-state { + pins = "gpio49"; + function = "qup14"; + }; + + qup_uart12_tx: qup-uart12-tx-state { + pins = "gpio50"; + function = "qup14"; + }; + + qup_uart12_rx: qup-uart12-rx-state { + pins = "gpio51"; + function = "qup14"; + }; + + qup_uart13_cts: qup-uart13-cts-state { + pins = "gpio52"; + function = "qup15"; + }; + + qup_uart13_rts: qup-uart13-rts-state { + pins = "gpio53"; + function = "qup15"; + }; + + qup_uart13_tx: qup-uart13-tx-state { + pins = "gpio54"; + function = "qup15"; + }; + + qup_uart13_rx: qup-uart13-rx-state { + pins = "gpio55"; + function = "qup15"; + }; + + qup_uart14_cts: qup-uart14-cts-state { + pins = "gpio56"; + function = "qup16"; + }; + + qup_uart14_rts: qup-uart14-rts-state { + pins = "gpio57"; + function = "qup16"; + }; + + qup_uart14_tx: qup-uart14-tx-state { + pins = "gpio58"; + function = "qup16"; + }; + + qup_uart14_rx: qup-uart14-rx-state { + pins = "gpio59"; + function = "qup16"; + }; + + qup_uart15_cts: qup-uart15-cts-state { + pins = "gpio60"; + function = "qup17"; + }; + + qup_uart15_rts: qup-uart15-rts-state { + pins = "gpio61"; + function = "qup17"; + }; + + qup_uart15_tx: qup-uart15-tx-state { + pins = "gpio62"; + function = "qup17"; + }; + + qup_uart15_rx: qup-uart15-rx-state { + pins = "gpio63"; + function = "qup17"; + }; + + sdc1_clk: sdc1-clk-state { + pins = "sdc1_clk"; + }; + + sdc1_cmd: sdc1-cmd-state { + pins = "sdc1_cmd"; + }; + + sdc1_data: sdc1-data-state { + pins = "sdc1_data"; + }; + + sdc1_rclk: sdc1-rclk-state { + pins = "sdc1_rclk"; + }; + + sdc1_clk_sleep: sdc1-clk-sleep-state { + pins = "sdc1_clk"; + drive-strength = <2>; + bias-bus-hold; + }; + + sdc1_cmd_sleep: sdc1-cmd-sleep-state { + pins = "sdc1_cmd"; + drive-strength = <2>; + bias-bus-hold; + }; + + sdc1_data_sleep: sdc1-data-sleep-state { + pins = "sdc1_data"; + drive-strength = <2>; + bias-bus-hold; + }; + + sdc1_rclk_sleep: sdc1-rclk-sleep-state { + pins = "sdc1_rclk"; + drive-strength = <2>; + bias-bus-hold; + }; + + sdc2_clk: sdc2-clk-state { + pins = "sdc2_clk"; + }; + + sdc2_cmd: sdc2-cmd-state { + pins = "sdc2_cmd"; + }; + + sdc2_data: sdc2-data-state { + pins = "sdc2_data"; + }; + + sdc2_clk_sleep: sdc2-clk-sleep-state { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-bus-hold; + }; + + sdc2_cmd_sleep: sdc2-cmd-sleep-state { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-bus-hold; + }; + + sdc2_data_sleep: sdc2-data-sleep-state { + pins = "sdc2_data"; + drive-strength = <2>; + bias-bus-hold; + }; + }; + + sram@146a5000 { + compatible = "qcom,sc7280-imem", "syscon", "simple-mfd"; + reg = <0 0x146a5000 0 0x6000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0 0x146a5000 0x6000>; + + pil-reloc@594c { + compatible = "qcom,pil-reloc-info"; + reg = <0x594c 0xc8>; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sc7280-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + dma-coherent; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + anoc_1_tbu: tbu@151dd000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151dd000 0x0 0x1000>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>; + qcom,stream-id-range = <&apps_smmu 0x0 0x400>; + }; + + anoc_2_tbu: tbu@151e1000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151e1000 0x0 0x1000>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>; + qcom,stream-id-range = <&apps_smmu 0x400 0x400>; + }; + + mnoc_hf_0_tbu: tbu@151e5000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151e5000 0x0 0x1000>; + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_HF0_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x800 0x400>; + }; + + mnoc_hf_1_tbu: tbu@151e9000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151e9000 0x0 0x1000>; + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_HF1_GDSC>; + qcom,stream-id-range = <&apps_smmu 0xc00 0x400>; + }; + + compute_dsp_1_tbu: tbu@151ed000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151ed000 0x0 0x1000>; + interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_TURING_MMU_TBU1_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x1000 0x400>; + }; + + compute_dsp_0_tbu: tbu@151f1000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151f1000 0x0 0x1000>; + interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_TURING_MMU_TBU0_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x1400 0x400>; + }; + + adsp_tbu: tbu@151f5000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151f5000 0x0 0x1000>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &lpass_ag_noc SLAVE_LPASS_CORE_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + qcom,stream-id-range = <&apps_smmu 0x1800 0x400>; + }; + + anoc_1_pcie_tbu: tbu@151f9000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151f9000 0x0 0x1000>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>; + qcom,stream-id-range = <&apps_smmu 0x1c00 0x400>; + }; + + mnoc_sf_0_tbu: tbu@151fd000 { + compatible = "qcom,sc7280-tbu"; + reg = <0x0 0x151fd000 0x0 0x1000>; + interconnects = <&mmss_noc MASTER_CAMNOC_SF QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_SF0_GDSC>; + qcom,stream-id-range = <&apps_smmu 0x2000 0x400>; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + reg = <0 0x17a00000 0 0x10000>, /* GICD */ + <0 0x17a60000 0 0x100000>; /* GICR * 8 */ + interrupts = ; + #interrupt-cells = <3>; + interrupt-controller; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + msi-controller@17a40000 { + compatible = "arm,gic-v3-its"; + reg = <0 0x17a40000 0 0x20000>; + msi-controller; + #msi-cells = <1>; + status = "disabled"; + }; + }; + + watchdog: watchdog@17c10000 { + compatible = "qcom,apss-wdt-sc7280", "qcom,kpss-wdt"; + reg = <0 0x17c10000 0 0x1000>; + clocks = <&sleep_clk>; + interrupts = ; + status = "reserved"; /* Owned by Gunyah hyp */ + }; + + timer@17c20000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x20000000>; + compatible = "arm,armv7-timer-mem"; + reg = <0 0x17c20000 0 0x1000>; + + frame@17c21000 { + frame-number = <0>; + interrupts = , + ; + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = ; + reg = <0x17c23000 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = ; + reg = <0x17c25000 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = ; + reg = <0x17c27000 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = ; + reg = <0x17c29000 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = ; + reg = <0x17c2b000 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = ; + reg = <0x17c2d000 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + reg = <0 0x18200000 0 0x10000>, + <0 0x18210000 0 0x10000>, + <0 0x18220000 0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = , + , + ; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = , + , + , + ; + power-domains = <&cluster_pd>; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhpd: power-controller { + compatible = "qcom,sc7280-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = ; + }; + + rpmhpd_opp_low_svs: opp2 { + opp-level = ; + }; + + rpmhpd_opp_svs: opp3 { + opp-level = ; + }; + + rpmhpd_opp_svs_l1: opp4 { + opp-level = ; + }; + + rpmhpd_opp_svs_l2: opp5 { + opp-level = ; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = ; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = ; + }; + + rpmhpd_opp_turbo: opp8 { + opp-level = ; + }; + + rpmhpd_opp_turbo_l1: opp9 { + opp-level = ; + }; + }; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sc7280-rpmh-clk"; + clocks = <&xo_board>; + clock-names = "xo"; + #clock-cells = <1>; + }; + }; + + epss_l3: interconnect@18590000 { + compatible = "qcom,sc7280-epss-l3", "qcom,epss-l3"; + reg = <0 0x18590000 0 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + #interconnect-cells = <1>; + }; + + cpufreq_hw: cpufreq@18591000 { + compatible = "qcom,sc7280-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0 0x18591000 0 0x1000>, + <0 0x18592000 0 0x1000>, + <0 0x18593000 0 0x1000>; + + interrupts = , + , + ; + interrupt-names = "dcvsh-irq-0", + "dcvsh-irq-1", + "dcvsh-irq-2"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + }; + + sound: sound { + }; + + thermal_zones: thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu0_alert1>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu1_alert1>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu2_alert1>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu3_alert1>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpu4_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_alert0>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_alert1>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu5_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_alert0>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_alert1>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu6_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_alert0>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_alert1>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu7_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_alert0>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu7_alert1>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu8-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 11>; + + trips { + cpu8_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu8_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu8_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu8_alert0>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu8_alert1>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu9-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 12>; + + trips { + cpu9_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu9_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu9_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu9_alert0>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu9_alert1>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu10-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 13>; + + trips { + cpu10_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu10_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu10_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu10_alert0>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu10_alert1>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu11-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens0 14>; + + trips { + cpu11_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu11_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu11_crit: cpu-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu11_alert0>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu11_alert1>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + aoss0-thermal { + polling-delay-passive = <0>; + + thermal-sensors = <&tsens0 0>; + + trips { + aoss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss0_crit: aoss0-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <0>; + + thermal-sensors = <&tsens1 0>; + + trips { + aoss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss1_crit: aoss1-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <0>; + + thermal-sensors = <&tsens0 5>; + + trips { + cpuss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cpuss0_crit: cluster0-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <0>; + + thermal-sensors = <&tsens0 6>; + + trips { + cpuss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cpuss1_crit: cluster0-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss0-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&tsens1 1>; + + trips { + gpuss0_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpuss0_crit: gpuss0-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpuss0_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpuss1-thermal { + polling-delay-passive = <100>; + + thermal-sensors = <&tsens1 2>; + + trips { + gpuss1_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpuss1_crit: gpuss1-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpuss1_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + nspss0-thermal { + thermal-sensors = <&tsens1 3>; + + trips { + nspss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nspss0_crit: nspss0-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nspss1-thermal { + thermal-sensors = <&tsens1 4>; + + trips { + nspss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nspss1_crit: nspss1-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + video-thermal { + thermal-sensors = <&tsens1 5>; + + trips { + video_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + video_crit: video-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + ddr-thermal { + thermal-sensors = <&tsens1 6>; + + trips { + ddr_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + ddr_crit: ddr-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + mdmss0-thermal { + thermal-sensors = <&tsens1 7>; + + trips { + mdmss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + mdmss0_crit: mdmss0-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + mdmss1-thermal { + thermal-sensors = <&tsens1 8>; + + trips { + mdmss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + mdmss1_crit: mdmss1-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + mdmss2-thermal { + thermal-sensors = <&tsens1 9>; + + trips { + mdmss2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + mdmss2_crit: mdmss2-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + mdmss3-thermal { + thermal-sensors = <&tsens1 10>; + + trips { + mdmss3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + mdmss3_crit: mdmss3-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + camera0-thermal { + thermal-sensors = <&tsens1 11>; + + trips { + camera0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + camera0_crit: camera0-crit { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/lemans-evk-camera.dtso b/arch/arm64/boot/dts/qcom/lemans-evk-camera.dtso new file mode 100644 index 00000000000000..4600d5441cce45 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/lemans-evk-camera.dtso @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024-2025 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/* + * Camera Sensor overlay on top of leman evk core kit. + */ + +/dts-v1/; +/plugin/; + +#include +#include + +&{/} { + vreg_cam1_1p8: vreg_cam1_1p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_cam1_1p8"; + startup-delay-us = <10000>; + enable-active-high; + gpio = <&pmm8654au_0_gpios 8 GPIO_ACTIVE_HIGH>; + }; +}; + +&camcc { + status = "okay"; +}; + +&camss { + vdda-pll-supply = <&vreg_l1c>; + vdda-phy-supply = <&vreg_l4a>; + + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + csiphy1_ep: endpoint { + clock-lanes = <7>; + data-lanes = <0 1 2 3>; + remote-endpoint = <&imx577_ep1>; + }; + }; + }; +}; + +&cci1 { + pinctrl-0 = <&cci1_0_default>; + pinctrl-1 = <&cci1_0_sleep>; + + status = "okay"; +}; + +&cci1_i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + camera@1a { + compatible = "sony,imx577"; + reg = <0x1a>; + + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&cam1_default>; + pinctrl-names = "default"; + + clocks = <&camcc CAM_CC_MCLK1_CLK>; + assigned-clocks = <&camcc CAM_CC_MCLK1_CLK>; + assigned-clock-rates = <24000000>; + + dovdd-supply = <&vreg_s4a>; + avdd-supply = <&vreg_cam1_1p8>; + + port { + imx577_ep1: endpoint { + clock-lanes = <7>; + link-frequencies = /bits/ 64 <600000000>; + data-lanes = <0 1 2 3>; + remote-endpoint = <&csiphy1_ep>; + }; + }; + }; +}; + +&tlmm { + cam1_default: cam1-default-state { + mclk-pins { + pins = "gpio73"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + rst-pins { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts index c7dc9b8f445787..b40fa203e4a2f0 100644 --- a/arch/arm64/boot/dts/qcom/lemans-evk.dts +++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts @@ -6,6 +6,7 @@ /dts-v1/; #include +#include #include #include @@ -501,6 +502,20 @@ mac_addr0: mac-addr@0 { }; }; +&i2c19 { + status = "okay"; + + fan_controller: fan@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + #pwm-cells = <2>; + + fan { + pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED>; + }; + }; +}; + &iris { firmware-name = "qcom/vpu/vpu30_p4_s6_16mb.mbn"; @@ -587,15 +602,28 @@ &pcie1_phy { status = "okay"; }; +&pmm8654au_0_pon_resin { + linux,code = ; + status = "okay"; +}; + +&qup_i2c19_default { + drive-strength = <2>; + bias-pull-up; +}; + &qupv3_id_0 { + firmware-name = "qcom/sa8775p/qupv3fw.elf"; status = "okay"; }; &qupv3_id_1 { + firmware-name = "qcom/sa8775p/qupv3fw.elf"; status = "okay"; }; &qupv3_id_2 { + firmware-name = "qcom/sa8775p/qupv3fw.elf"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/lemans-pmics.dtsi b/arch/arm64/boot/dts/qcom/lemans-pmics.dtsi index 1369c3d43f866d..341119fc824406 100644 --- a/arch/arm64/boot/dts/qcom/lemans-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/lemans-pmics.dtsi @@ -132,6 +132,15 @@ pmm8654au_0_pon_resin: resin { }; }; + pmm8654au_0_rtc: rtc@6100 { + compatible = "qcom,pmk8350-rtc"; + reg = <0x6100>, + <0x6200>; + reg-names = "rtc", + "alarm"; + interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; + }; + pmm8654au_0_gpios: gpio@8800 { compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; reg = <0x8800>; diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi index cf685cb186edca..0b154d57ba24e6 100644 --- a/arch/arm64/boot/dts/qcom/lemans.dtsi +++ b/arch/arm64/boot/dts/qcom/lemans.dtsi @@ -3901,6 +3901,32 @@ usb_0_hsphy: phy@88e4000 { status = "disabled"; }; + usb_1_hsphy: phy@88e6000 { + compatible = "qcom,sa8775p-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e6000 0 0x120>; + clocks = <&gcc GCC_USB_CLKREF_EN>; + clock-names = "ref"; + resets = <&gcc GCC_USB2_PHY_SEC_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_2_hsphy: phy@88e7000 { + compatible = "qcom,sa8775p-usb-hs-phy", + "qcom,usb-snps-hs-5nm-phy"; + reg = <0 0x088e7000 0 0x120>; + clocks = <&gcc GCC_USB_CLKREF_EN>; + clock-names = "ref"; + resets = <&gcc GCC_USB3_PHY_TERT_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + usb_0_qmpphy: phy@88e8000 { compatible = "qcom,sa8775p-qmp-usb3-uni-phy"; reg = <0 0x088e8000 0 0x2000>; @@ -3925,6 +3951,36 @@ usb_0_qmpphy: phy@88e8000 { status = "disabled"; }; + usb_1_qmpphy: phy@88ea000 { + compatible = "qcom,sa8775p-qmp-usb3-uni-phy"; + reg = <0 0x088ea000 0 0x2000>; + + clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, + <&gcc GCC_USB_CLKREF_EN>, + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "aux", "ref", "com_aux", "pipe"; + + resets = <&gcc GCC_USB3_PHY_SEC_BCR>, + <&gcc GCC_USB3PHY_PHY_SEC_BCR>; + reset-names = "phy", "phy_phy"; + + power-domains = <&gcc USB30_SEC_GDSC>; + + #clock-cells = <0>; + clock-output-names = "usb3_sec_phy_pipe_clk_src"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + refgen: regulator@891c000 { + compatible = "qcom,sa8775p-refgen-regulator", + "qcom,sm8250-refgen-regulator"; + reg = <0x0 0x0891c000 0x0 0x84>; + }; + usb_0: usb@a600000 { compatible = "qcom,sa8775p-dwc3", "qcom,snps-dwc3"; reg = <0 0x0a600000 0 0xfc100>; @@ -3973,43 +4029,6 @@ usb_0: usb@a600000 { status = "disabled"; }; - usb_1_hsphy: phy@88e6000 { - compatible = "qcom,sa8775p-usb-hs-phy", - "qcom,usb-snps-hs-5nm-phy"; - reg = <0 0x088e6000 0 0x120>; - clocks = <&gcc GCC_USB_CLKREF_EN>; - clock-names = "ref"; - resets = <&gcc GCC_USB2_PHY_SEC_BCR>; - - #phy-cells = <0>; - - status = "disabled"; - }; - - usb_1_qmpphy: phy@88ea000 { - compatible = "qcom,sa8775p-qmp-usb3-uni-phy"; - reg = <0 0x088ea000 0 0x2000>; - - clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, - <&gcc GCC_USB_CLKREF_EN>, - <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, - <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; - clock-names = "aux", "ref", "com_aux", "pipe"; - - resets = <&gcc GCC_USB3_PHY_SEC_BCR>, - <&gcc GCC_USB3PHY_PHY_SEC_BCR>; - reset-names = "phy", "phy_phy"; - - power-domains = <&gcc USB30_SEC_GDSC>; - - #clock-cells = <0>; - clock-output-names = "usb3_sec_phy_pipe_clk_src"; - - #phy-cells = <0>; - - status = "disabled"; - }; - usb_1: usb@a800000 { compatible = "qcom,sa8775p-dwc3", "qcom,snps-dwc3"; reg = <0 0x0a800000 0 0xfc100>; @@ -4058,19 +4077,6 @@ usb_1: usb@a800000 { status = "disabled"; }; - usb_2_hsphy: phy@88e7000 { - compatible = "qcom,sa8775p-usb-hs-phy", - "qcom,usb-snps-hs-5nm-phy"; - reg = <0 0x088e7000 0 0x120>; - clocks = <&gcc GCC_USB_CLKREF_EN>; - clock-names = "ref"; - resets = <&gcc GCC_USB3_PHY_TERT_BCR>; - - #phy-cells = <0>; - - status = "disabled"; - }; - usb_2: usb@a400000 { compatible = "qcom,sa8775p-dwc3", "qcom,snps-dwc3"; reg = <0 0x0a400000 0 0xfc100>; @@ -4106,6 +4112,7 @@ usb_2: usb@a400000 { <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB2 0>; interconnect-names = "usb-ddr", "apps-usb"; + qcom,select-utmi-as-pipe-clk; wakeup-source; iommus = <&apps_smmu 0x020 0x0>; @@ -4899,6 +4906,8 @@ mdss0_dsi0: dsi@ae94000 { operating-points-v2 = <&mdss_dsi_opp_table>; power-domains = <&rpmhpd SA8775P_MMCX>; + refgen-supply = <&refgen>; + #address-cells = <1>; #size-cells = <0>; @@ -4981,6 +4990,8 @@ mdss0_dsi1: dsi@ae96000 { operating-points-v2 = <&mdss_dsi_opp_table>; power-domains = <&rpmhpd SA8775P_MMCX>; + refgen-supply = <&refgen>; + #address-cells = <1>; #size-cells = <0>; @@ -6812,11 +6823,12 @@ ethernet1: ethernet@23000000 { "ptp_ref", "phyaux"; - interconnects = <&aggre1_noc MASTER_EMAC_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_EMAC1_CFG QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "mac-mem", "cpu-mac"; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_EMAC1_CFG QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_EMAC_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "cpu-mac", + "mac-mem"; power-domains = <&gcc EMAC1_GDSC>; @@ -6853,11 +6865,12 @@ ethernet0: ethernet@23040000 { "ptp_ref", "phyaux"; - interconnects = <&aggre1_noc MASTER_EMAC QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_EMAC_CFG QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "mac-mem", "cpu-mac"; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_EMAC_CFG QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_EMAC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "cpu-mac", + "mac-mem"; power-domains = <&gcc EMAC0_GDSC>; diff --git a/arch/arm64/boot/dts/qcom/monaco-evk.dts b/arch/arm64/boot/dts/qcom/monaco-evk.dts index e72cf6725a52c0..bb35893da73d14 100644 --- a/arch/arm64/boot/dts/qcom/monaco-evk.dts +++ b/arch/arm64/boot/dts/qcom/monaco-evk.dts @@ -9,8 +9,8 @@ #include #include -#include "qcs8300.dtsi" -#include "qcs8300-pmics.dtsi" +#include "monaco.dtsi" +#include "monaco-pmics.dtsi" / { model = "Qualcomm Technologies, Inc. Monaco EVK"; @@ -401,10 +401,12 @@ &iris { }; &qupv3_id_0 { + firmware-name = "qcom/qcs8300/qupv3fw.elf"; status = "okay"; }; &qupv3_id_1 { + firmware-name = "qcom/qcs8300/qupv3fw.elf"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/monaco-pmics.dtsi b/arch/arm64/boot/dts/qcom/monaco-pmics.dtsi new file mode 100644 index 00000000000000..e990d7367719be --- /dev/null +++ b/arch/arm64/boot/dts/qcom/monaco-pmics.dtsi @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include +#include + +&spmi_bus { + pmm8620au_0: pmic@0 { + compatible = "qcom,pmm8654au", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmm8620au_0_rtc: rtc@6100 { + compatible = "qcom,pmk8350-rtc"; + reg = <0x6100>, <0x6200>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pmm8620au_0_gpios: gpio@8800 { + compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmm8620au_0_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmm8650au_1: pmic@2 { + compatible = "qcom,pmm8654au", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmm8650au_1_gpios: gpio@8800 { + compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmm8650au_1_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/monaco.dtsi b/arch/arm64/boot/dts/qcom/monaco.dtsi new file mode 100644 index 00000000000000..816fa2af8a9a66 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/monaco.dtsi @@ -0,0 +1,6230 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + #address-cells = <2>; + #size-cells = <2>; + + clocks { + xo_board_clk: xo-board-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <38400000>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a78c"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&l2_0>; + power-domains = <&cpu_pd0>; + power-domain-names = "psci"; + capacity-dmips-mhz = <1946>; + dynamic-power-coefficient = <472>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3_cl0 MASTER_EPSS_L3_APPS + &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>; + + l2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a78c"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&l2_1>; + power-domains = <&cpu_pd1>; + power-domain-names = "psci"; + capacity-dmips-mhz = <1946>; + dynamic-power-coefficient = <472>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3_cl0 MASTER_EPSS_L3_APPS + &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>; + + l2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a78c"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&l2_2>; + power-domains = <&cpu_pd2>; + power-domain-names = "psci"; + capacity-dmips-mhz = <1946>; + dynamic-power-coefficient = <507>; + qcom,freq-domain = <&cpufreq_hw 2>; + operating-points-v2 = <&cpu2_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3_cl0 MASTER_EPSS_L3_APPS + &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>; + + l2_2: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a78c"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&l2_3>; + power-domains = <&cpu_pd3>; + power-domain-names = "psci"; + capacity-dmips-mhz = <1946>; + dynamic-power-coefficient = <507>; + qcom,freq-domain = <&cpufreq_hw 2>; + operating-points-v2 = <&cpu2_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3_cl0 MASTER_EPSS_L3_APPS + &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>; + + l2_3: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu4: cpu@10000 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x10000>; + enable-method = "psci"; + next-level-cache = <&l2_4>; + power-domains = <&cpu_pd4>; + power-domain-names = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3_cl1 MASTER_EPSS_L3_APPS + &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>; + + l2_4: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_1>; + }; + }; + + cpu5: cpu@10100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x10100>; + enable-method = "psci"; + next-level-cache = <&l2_5>; + power-domains = <&cpu_pd5>; + power-domain-names = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3_cl1 MASTER_EPSS_L3_APPS + &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>; + + l2_5: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_1>; + }; + }; + + cpu6: cpu@10200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x10200>; + enable-method = "psci"; + next-level-cache = <&l2_6>; + power-domains = <&cpu_pd6>; + power-domain-names = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3_cl1 MASTER_EPSS_L3_APPS + &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>; + + l2_6: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_1>; + }; + }; + + cpu7: cpu@10300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x10300>; + enable-method = "psci"; + next-level-cache = <&l2_7>; + power-domains = <&cpu_pd7>; + power-domain-names = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&epss_l3_cl1 MASTER_EPSS_L3_APPS + &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>; + + l2_7: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_1>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu4>; + }; + + core1 { + cpu = <&cpu5>; + }; + + core2 { + cpu = <&cpu6>; + }; + + core3 { + cpu = <&cpu7>; + }; + }; + }; + + l3_0: l3-cache-0 { + compatible = "cache"; + cache-level = <3>; + cache-unified; + }; + + l3_1: l3-cache-1 { + compatible = "cache"; + cache-level = <3>; + cache-unified; + }; + + idle-states { + entry-method = "psci"; + + little_cpu_sleep_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "silver-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <449>; + exit-latency-us = <801>; + min-residency-us = <1574>; + local-timer-stop; + }; + + little_cpu_sleep_1: cpu-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "silver-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <602>; + exit-latency-us = <961>; + min-residency-us = <4288>; + local-timer-stop; + }; + + big_cpu_sleep_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <549>; + exit-latency-us = <901>; + min-residency-us = <1774>; + local-timer-stop; + }; + + big_cpu_sleep_1: cpu-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "gold-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <702>; + exit-latency-us = <1061>; + min-residency-us = <4488>; + local-timer-stop; + }; + }; + + domain-idle-states { + silver_cluster_sleep: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <2552>; + exit-latency-us = <2848>; + min-residency-us = <5908>; + }; + + gold_cluster_sleep: cluster-sleep-1 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <2752>; + exit-latency-us = <3048>; + min-residency-us = <6118>; + }; + + system_sleep: domain-sleep { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x42000144>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + }; + }; + }; + + cpu0_opp_table: opp-table-cpu0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + opp-peak-kBps = <(681600 * 4) (921600 * 32)>; + }; + + opp-1017600000 { + opp-hz = /bits/ 64 <1017600000>; + opp-peak-kBps = <(1017600 * 4) (921600 * 32)>; + }; + + opp-1190400000 { + opp-hz = /bits/ 64 <1190400000>; + opp-peak-kBps = <(1708800 * 4) (921600 * 32)>; + }; + + opp-1267200000 { + opp-hz = /bits/ 64 <1267200000>; + opp-peak-kBps = <(2092800 * 4) (998400 * 32)>; + }; + + opp-1344000000 { + opp-hz = /bits/ 64 <1344000000>; + opp-peak-kBps = <(2092800 * 4) (1075200 * 32)>; + }; + + opp-1420800000 { + opp-hz = /bits/ 64 <1420800000>; + opp-peak-kBps = <(2092800 * 4) (1152000 * 32)>; + }; + + opp-1497600000 { + opp-hz = /bits/ 64 <1497600000>; + opp-peak-kBps = <(2092800 * 4) (1228800 * 32)>; + }; + + opp-1574400000 { + opp-hz = /bits/ 64 <1574400000>; + opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>; + }; + + opp-1670400000 { + opp-hz = /bits/ 64 <1670400000>; + opp-peak-kBps = <(2736000 * 4) (1401600 * 32)>; + }; + + opp-1747200000 { + opp-hz = /bits/ 64 <1747200000>; + opp-peak-kBps = <(2736000 * 4) (1401600 * 32)>; + }; + + opp-1824000000 { + opp-hz = /bits/ 64 <1824000000>; + opp-peak-kBps = <(2736000 * 4) (1478400 * 32)>; + }; + + opp-1900800000 { + opp-hz = /bits/ 64 <1900800000>; + opp-peak-kBps = <(2736000 * 4) (1478400 * 32)>; + }; + + opp-1977600000 { + opp-hz = /bits/ 64 <1977600000>; + opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>; + }; + + opp-2054400000 { + opp-hz = /bits/ 64 <2054400000>; + opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>; + }; + + opp-2112000000 { + opp-hz = /bits/ 64 <2112000000>; + opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>; + }; + + }; + + cpu2_opp_table: opp-table-cpu2 { + compatible = "operating-points-v2"; + opp-shared; + + opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + opp-peak-kBps = <(681600 * 4) (921600 * 32)>; + }; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + opp-peak-kBps = <(1017600 * 4) (921600 * 32)>; + }; + + opp-1267200000 { + opp-hz = /bits/ 64 <1267200000>; + opp-peak-kBps = <(1708800 * 4) (921600 * 32)>; + }; + + opp-1344000000 { + opp-hz = /bits/ 64 <1344000000>; + opp-peak-kBps = <(2092800 * 4) (998400 * 32)>; + }; + + opp-1420800000 { + opp-hz = /bits/ 64 <1420800000>; + opp-peak-kBps = <(2092800 * 4) (998400 * 32)>; + }; + + opp-1497600000 { + opp-hz = /bits/ 64 <1497600000>; + opp-peak-kBps = <(2092800 * 4) (1075200 * 32)>; + }; + + opp-1574400000 { + opp-hz = /bits/ 64 <1574400000>; + opp-peak-kBps = <(2092800 * 4) (1152000 * 32)>; + }; + + opp-1632000000 { + opp-hz = /bits/ 64 <1632000000>; + opp-peak-kBps = <(2092800 * 4) (1228800 * 32)>; + }; + + opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>; + }; + + opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>; + }; + + opp-1900800000 { + opp-hz = /bits/ 64 <1900800000>; + opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>; + }; + + opp-1977600000 { + opp-hz = /bits/ 64 <1977600000>; + opp-peak-kBps = <(2736000 * 4) (1401600 * 32)>; + }; + + opp-2054400000 { + opp-hz = /bits/ 64 <2054400000>; + opp-peak-kBps = <(2736000 * 4) (1478400 * 32)>; + }; + + opp-2131200000 { + opp-hz = /bits/ 64 <2131200000>; + opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>; + }; + + opp-2208000000 { + opp-hz = /bits/ 64 <2208000000>; + opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>; + }; + + opp-2284800000 { + opp-hz = /bits/ 64 <2284800000>; + opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>; + }; + + opp-2361600000 { + opp-hz = /bits/ 64 <2361600000>; + opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>; + }; + + }; + + cpu4_opp_table: opp-table-cpu4 { + compatible = "operating-points-v2"; + opp-shared; + + opp-844800000 { + opp-hz = /bits/ 64 <844800000>; + opp-peak-kBps = <(681600 * 4) (921600 * 32)>; + }; + + opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + opp-peak-kBps = <(1708800 * 4) (921600 * 32)>; + }; + + opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + opp-peak-kBps = <(2092800 * 4) (998400 * 32)>; + }; + + opp-1305600000 { + opp-hz = /bits/ 64 <1305600000>; + opp-peak-kBps = <(2092800 * 4) (1075200 * 32)>; + }; + + opp-1382400000 { + opp-hz = /bits/ 64 <1382400000>; + opp-peak-kBps = <(2092800 * 4) (1152000 * 32)>; + }; + + opp-1459200000 { + opp-hz = /bits/ 64 <1459200000>; + opp-peak-kBps = <(2092800 * 4) (1228800 * 32)>; + }; + + opp-1497600000 { + opp-hz = /bits/ 64 <1497600000>; + opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>; + }; + + opp-1574400000 { + opp-hz = /bits/ 64 <1574400000>; + opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>; + }; + + opp-1651200000 { + opp-hz = /bits/ 64 <1651200000>; + opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>; + }; + + opp-1728000000 { + opp-hz = /bits/ 64 <1728000000>; + opp-peak-kBps = <(2736000 * 4) (1401600 * 32)>; + }; + + opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + opp-peak-kBps = <(2736000 * 4) (1478400 * 32)>; + }; + + opp-1881600000 { + opp-hz = /bits/ 64 <1881600000>; + opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>; + }; + + opp-1958400000 { + opp-hz = /bits/ 64 <1958400000>; + opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>; + }; + }; + + dummy_eud: dummy-sink { + compatible = "arm,coresight-dummy-sink"; + + in-ports { + port { + eud_in: endpoint { + remote-endpoint = <&swao_rep_out1>; + }; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-qcs8300", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x13000>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + clk_virt: interconnect-0 { + compatible = "qcom,qcs8300-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-1 { + compatible = "qcom,qcs8300-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + qup_opp_table: opp-table-qup { + compatible = "operating-points-v2"; + + opp-120000000 { + opp-hz = /bits/ 64 <120000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + + pmu-a55 { + compatible = "arm,cortex-a55-pmu"; + interrupts = ; + }; + + pmu-a78 { + compatible = "arm,cortex-a78-pmu"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + cpu_pd0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd0>; + domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>; + }; + + cpu_pd1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd0>; + domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>; + }; + + cpu_pd2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd0>; + domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>; + }; + + cpu_pd3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd0>; + domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>; + }; + + cpu_pd4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd1>; + domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; + }; + + cpu_pd5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd1>; + domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; + }; + + cpu_pd6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd1>; + domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; + }; + + cpu_pd7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd1>; + domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; + }; + + cluster_pd0: power-domain-cluster0 { + #power-domain-cells = <0>; + power-domains = <&system_pd>; + domain-idle-states = <&gold_cluster_sleep>; + }; + + cluster_pd1: power-domain-cluster1 { + #power-domain-cells = <0>; + power-domains = <&system_pd>; + domain-idle-states = <&silver_cluster_sleep>; + }; + + system_pd: power-domain-system { + #power-domain-cells = <0>; + domain-idle-states = <&system_sleep>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + aop_image_mem: aop-image-region@90800000 { + reg = <0x0 0x90800000 0x0 0x60000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db-region@90860000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x90860000 0x0 0x20000>; + no-map; + }; + + smem_mem: smem@90900000 { + compatible = "qcom,smem"; + reg = <0x0 0x90900000 0x0 0x200000>; + no-map; + hwlocks = <&tcsr_mutex 3>; + }; + + lpass_machine_learning_mem: lpass-machine-learning-region@93b00000 { + reg = <0x0 0x93b00000 0x0 0xf00000>; + no-map; + }; + + adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap-region@94a00000 { + reg = <0x0 0x94a00000 0x0 0x800000>; + no-map; + }; + + camera_mem: camera-region@95200000 { + reg = <0x0 0x95200000 0x0 0x500000>; + no-map; + }; + + adsp_mem: adsp-region@95c00000 { + no-map; + reg = <0x0 0x95c00000 0x0 0x1e00000>; + }; + + q6_adsp_dtb_mem: q6-adsp-dtb-region@97a00000 { + reg = <0x0 0x97a00000 0x0 0x80000>; + no-map; + }; + + q6_gpdsp_dtb_mem: q6-gpdsp-dtb-region@97a80000 { + reg = <0x0 0x97a80000 0x0 0x80000>; + no-map; + }; + + gpdsp_mem: gpdsp-region@97b00000 { + reg = <0x0 0x97b00000 0x0 0x1e00000>; + no-map; + }; + + q6_cdsp_dtb_mem: q6-cdsp-dtb-region@99900000 { + reg = <0x0 0x99900000 0x0 0x80000>; + no-map; + }; + + cdsp_mem: cdsp-region@99980000 { + reg = <0x0 0x99980000 0x0 0x1e00000>; + no-map; + }; + + gpu_microcode_mem: gpu-microcode-region@9b780000 { + reg = <0x0 0x9b780000 0x0 0x2000>; + no-map; + }; + + cvp_mem: cvp-region@9b782000 { + reg = <0x0 0x9b782000 0x0 0x700000>; + no-map; + }; + + video_mem: video-region@9be82000 { + reg = <0x0 0x9be82000 0x0 0x700000>; + no-map; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,smem = <443>, <429>; + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,smem = <94>, <432>; + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + smp2p_cdsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + }; + + smp2p-gpdsp { + compatible = "qcom,smp2p"; + interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0 + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_GPDSP0 + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,smem = <617>, <616>; + qcom,local-pid = <0>; + qcom,remote-pid = <17>; + + smp2p_gpdsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + smp2p_gpdsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + ranges = <0 0 0 0 0x10 0>; + #address-cells = <2>; + #size-cells = <2>; + + gcc: clock-controller@100000 { + compatible = "qcom,qcs8300-gcc"; + reg = <0x0 0x00100000 0x0 0xc7018>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; + }; + + ipcc: mailbox@408000 { + compatible = "qcom,qcs8300-ipcc", "qcom,ipcc"; + reg = <0x0 0x408000 0x0 0x1000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + qfprom: efuse@784000 { + compatible = "qcom,qcs8300-qfprom", "qcom,qfprom"; + reg = <0x0 0x00784000 0x0 0x2410>; + #address-cells = <1>; + #size-cells = <1>; + + gpu_speed_bin: gpu_speed_bin@240c { + reg = <0x240c 0x1>; + bits = <0 8>; + }; + }; + + gpi_dma0: dma-controller@900000 { + compatible = "qcom,qcs8300-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0x0 0x900000 0x0 0x60000>; + #dma-cells = <3>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + iommus = <&apps_smmu 0x416 0x0>; + dma-channels = <12>; + dma-channel-mask = <0xfff>; + dma-coherent; + status = "disabled"; + }; + + qupv3_id_0: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x9c0000 0x0 0x2000>; + ranges; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + #address-cells = <2>; + #size-cells = <2>; + iommus = <&apps_smmu 0x403 0x0>; + dma-coherent; + status = "disabled"; + + i2c0: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x980000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c0_data_clk>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + spi0: spi@980000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x980000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + uart0: serial@980000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x980000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart0_cts>, <&qup_uart0_rts>, + <&qup_uart0_tx>, <&qup_uart0_rx>; + pinctrl-names = "default"; + interrupts = ; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + i2c1: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x984000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c1_data_clk>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + spi1: spi@984000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x984000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + uart1: serial@984000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x984000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart1_cts>, <&qup_uart1_rts>, + <&qup_uart1_tx>, <&qup_uart1_rx>; + pinctrl-names = "default"; + interrupts = ; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + i2c2: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x988000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c2_data_clk>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + spi2: spi@988000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x988000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + uart2: serial@988000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x988000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart2_cts>, <&qup_uart2_rts>, + <&qup_uart2_tx>, <&qup_uart2_rx>; + pinctrl-names = "default"; + interrupts = ; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + i2c3: i2c@98c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x98c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c3_data_clk>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + spi3: spi@98c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x98c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + uart3: serial@98c000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x98c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart3_cts>, <&qup_uart3_rts>, + <&qup_uart3_tx>, <&qup_uart3_rx>; + pinctrl-names = "default"; + interrupts = ; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + i2c4: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x990000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c4_data_clk>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + spi4: spi@990000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x990000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + uart4: serial@990000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x990000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart4_cts>, <&qup_uart4_rts>, + <&qup_uart4_tx>, <&qup_uart4_rx>; + pinctrl-names = "default"; + interrupts = ; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + i2c5: i2c@994000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x994000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c5_data_clk>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + spi5: spi@994000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x994000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + uart5: serial@994000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x994000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart5_cts>, <&qup_uart5_rts>, + <&qup_uart5_tx>, <&qup_uart5_rx>; + pinctrl-names = "default"; + interrupts = ; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + i2c6: i2c@998000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x998000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c6_data_clk>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + spi6: spi@998000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x998000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + uart6: serial@998000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x998000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart6_cts>, <&qup_uart6_rts>, + <&qup_uart6_tx>, <&qup_uart6_rx>; + pinctrl-names = "default"; + interrupts = ; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + uart7: serial@99c000 { + compatible = "qcom,geni-debug-uart"; + reg = <0x0 0x0099c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; + pinctrl-names = "default"; + interrupts = ; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,qcs8300-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0x0 0xa00000 0x0 0x60000>; + #dma-cells = <3>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + iommus = <&apps_smmu 0x456 0x0>; + dma-channels = <12>; + dma-channel-mask = <0xfff>; + dma-coherent; + status = "disabled"; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0xac0000 0x0 0x2000>; + ranges; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + #address-cells = <2>; + #size-cells = <2>; + iommus = <&apps_smmu 0x443 0x0>; + dma-coherent; + status = "disabled"; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa80000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c8_data_clk>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa80000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + uart8: serial@a80000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0xa80000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart8_cts>, <&qup_uart8_rts>, + <&qup_uart8_tx>, <&qup_uart8_rx>; + pinctrl-names = "default"; + interrupts = ; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa84000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c9_data_clk>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa84000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + uart9: serial@a84000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0xa84000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart9_cts>, <&qup_uart9_rts>, + <&qup_uart9_tx>, <&qup_uart9_rx>; + pinctrl-names = "default"; + interrupts = ; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa88000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c10_data_clk>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa88000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + uart10: serial@a88000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0xa88000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart10_cts>, <&qup_uart10_rts>, + <&qup_uart10_tx>, <&qup_uart10_rx>; + pinctrl-names = "default"; + interrupts = ; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa8c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c11_data_clk>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + uart11: serial@a8c000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0xa8c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart11_tx>, <&qup_uart11_rx>; + pinctrl-names = "default"; + interrupts = ; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa90000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c12_data_clk>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa90000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + uart12: serial@a90000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0xa90000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart12_cts>, <&qup_uart12_rts>, + <&qup_uart12_tx>, <&qup_uart12_rx>; + pinctrl-names = "default"; + interrupts = ; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa94000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c13_data_clk>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa94000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + uart13: serial@a94000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0xa94000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart13_cts>, <&qup_uart13_rts>, + <&qup_uart13_tx>, <&qup_uart13_rx>; + pinctrl-names = "default"; + interrupts = ; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa98000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c14_data_clk>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + spi14: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa98000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, + <&gpi_dma1 1 6 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + uart14: serial@a98000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0xa98000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart14_cts>, <&qup_uart14_rts>, + <&qup_uart14_tx>, <&qup_uart14_rx>; + pinctrl-names = "default"; + interrupts = ; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + i2c15: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa9c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c15_data_clk>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, + <&gpi_dma1 1 7 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + spi15: spi@a9c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa9c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>, + <&gpi_dma1 1 7 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + uart15: serial@a9c000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0xa9c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart15_cts>, <&qup_uart15_rts>, + <&qup_uart15_tx>, <&qup_uart15_rx>; + pinctrl-names = "default"; + interrupts = ; + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + }; + + gpi_dma3: dma-controller@b00000 { + compatible = "qcom,qcs8300-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0x0 0xb00000 0x0 0x60000>; + #dma-cells = <3>; + interrupts = , + , + , + ; + iommus = <&apps_smmu 0x56 0x0>; + dma-channels = <4>; + dma-channel-mask = <0xf>; + dma-coherent; + status = "disabled"; + }; + + qupv3_id_3: geniqup@bc0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0xbc0000 0x0 0x2000>; + ranges; + clocks = <&gcc GCC_QUPV3_WRAP_3_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_3_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + #address-cells = <2>; + #size-cells = <2>; + iommus = <&apps_smmu 0x43 0x0>; + dma-coherent; + status = "disabled"; + + i2c16: i2c@b80000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xb80000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c16_data_clk>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma3 0 0 QCOM_GPI_I2C>, + <&gpi_dma3 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + spi16: spi@b80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xb80000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma3 0 0 QCOM_GPI_SPI>, + <&gpi_dma3 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + uart16: serial@b80000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0xb80000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart16_cts>, <&qup_uart16_rts>, + <&qup_uart16_tx>, <&qup_uart16_rx>; + pinctrl-names = "default"; + interrupts = ; + interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + }; + + rng: rng@10d2000 { + compatible = "qcom,qcs8300-trng", "qcom,trng"; + reg = <0x0 0x010d2000 0x0 0x1000>; + }; + + config_noc: interconnect@14c0000 { + compatible = "qcom,qcs8300-config-noc"; + reg = <0x0 0x014c0000 0x0 0x13080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1680000 { + compatible = "qcom,qcs8300-system-noc"; + reg = <0x0 0x01680000 0x0 0x15080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16c0000 { + compatible = "qcom,qcs8300-aggre1-noc"; + reg = <0x0 0x016c0000 0x0 0x17080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,qcs8300-aggre2-noc"; + reg = <0x0 0x01700000 0x0 0x1a080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pcie_anoc: interconnect@1760000 { + compatible = "qcom,qcs8300-pcie-anoc"; + reg = <0x0 0x01760000 0x0 0xc080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gpdsp_anoc: interconnect@1780000 { + compatible = "qcom,qcs8300-gpdsp-anoc"; + reg = <0x0 0x01780000 0x0 0xd080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect@17a0000 { + compatible = "qcom,qcs8300-mmss-noc"; + reg = <0x0 0x017a0000 0x0 0x40000>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + ufs_mem_hc: ufs@1d84000 { + compatible = "qcom,qcs8300-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; + reg = <0x0 0x01d84000 0x0 0x3000>; + interrupts = ; + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc GCC_UFS_PHY_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + iommus = <&apps_smmu 0x100 0x0>; + dma-coherent; + + interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "ufs-ddr", + "cpu-ufs"; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + freq-table-hz = <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + qcom,ice = <&ice>; + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,qcs8300-qmp-ufs-phy", "qcom,sa8775p-qmp-ufs-phy"; + reg = <0x0 0x01d87000 0x0 0xe10>; + /* + * Yes, GCC_EDP_REF_CLKREF_EN is correct in qref. It + * enables the CXO clock to eDP *and* UFS PHY. + */ + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_EDP_REF_CLKREF_EN>; + clock-names = "ref", + "ref_aux", + "qref"; + power-domains = <&gcc GCC_UFS_PHY_GDSC>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + #phy-cells = <0>; + status = "disabled"; + }; + + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0x0 0x01dc4000 0x0 0x28000>; + interrupts = ; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <20>; + qcom,num-ees = <4>; + iommus = <&apps_smmu 0x480 0x00>, + <&apps_smmu 0x481 0x00>; + }; + + ice: crypto@1d88000 { + compatible = "qcom,qcs8300-inline-crypto-engine", + "qcom,inline-crypto-engine"; + reg = <0x0 0x01d88000 0x0 0x18000>; + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1fc0000 { + compatible = "qcom,qcs8300-tcsr", "syscon"; + reg = <0x0 0x1fc0000 0x0 0x30000>; + }; + + remoteproc_adsp: remoteproc@3000000 { + compatible = "qcom,qcs8300-adsp-pas", "qcom,sa8775p-adsp-pas"; + reg = <0x0 0x3000000 0x0 0x00100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_LCX>, + <&rpmhpd RPMHPD_LMX>; + power-domain-names = "lcx", + "lmx"; + + memory-region = <&adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + memory-region = <&adsp_rpc_remote_heap_mem>; + qcom,vmids = ; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x2003 0x0>; + dma-coherent; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x2004 0x0>; + dma-coherent; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x2005 0x0>; + dma-coherent; + }; + }; + + gpr { + compatible = "qcom,gpr"; + qcom,glink-channels = "adsp_apps"; + qcom,domain = ; + qcom,intents = <512 20>; + #address-cells = <1>; + #size-cells = <0>; + + q6apm: service@1 { + compatible = "qcom,q6apm"; + reg = ; + #sound-dai-cells = <0>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6apmbedai: bedais { + compatible = "qcom,q6apm-lpass-dais"; + #sound-dai-cells = <1>; + }; + + q6apmdai: dais { + compatible = "qcom,q6apm-dais"; + iommus = <&apps_smmu 0x2001 0x0>; + }; + }; + + q6prm: service@2 { + compatible = "qcom,q6prm"; + reg = ; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6prmcc: clock-controller { + compatible = "qcom,q6prm-lpass-clocks"; + #clock-cells = <2>; + }; + }; + }; + }; + }; + + lpass_ag_noc: interconnect@3c40000 { + compatible = "qcom,qcs8300-lpass-ag-noc"; + reg = <0x0 0x03c40000 0x0 0x17200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + stm@4002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0x0 0x04002000 0x0 0x1000>, + <0x0 0x16280000 0x0 0x180000>; + reg-names = "stm-base", + "stm-stimulus-base"; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = <&funnel0_in7>; + }; + }; + }; + }; + + tpda@4004000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x04004000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + qdss_tpda_in1: endpoint { + remote-endpoint = <&qdss_tpdm1_out>; + }; + }; + }; + + out-ports { + port { + qdss_tpda_out: endpoint { + remote-endpoint = <&funnel0_in6>; + }; + }; + }; + }; + + tpdm@400f000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x0400f000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + qdss_tpdm1_out: endpoint { + remote-endpoint = <&qdss_tpda_in1>; + }; + }; + }; + }; + + funnel@4041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x04041000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@6 { + reg = <6>; + + funnel0_in6: endpoint { + remote-endpoint = <&qdss_tpda_out>; + }; + }; + + port@7 { + reg = <7>; + + funnel0_in7: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + + out-ports { + port { + funnel0_out: endpoint { + remote-endpoint = <&qdss_funnel_in0>; + }; + }; + }; + }; + + funnel@4042000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x04042000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + + funnel1_in4: endpoint { + remote-endpoint = <&apss_funnel1_out>; + }; + }; + + port@5 { + reg = <5>; + + funnel1_in5: endpoint { + remote-endpoint = <&dlct0_funnel_out>; + }; + }; + + port@6 { + reg = <6>; + + funnel1_in6: endpoint { + remote-endpoint = <&dlmm_funnel_out>; + }; + }; + + port@7 { + reg = <7>; + + funnel1_in7: endpoint { + remote-endpoint = <&dlst_ch_funnel_out>; + }; + }; + }; + + out-ports { + port { + funnel1_out: endpoint { + remote-endpoint = <&qdss_funnel_in1>; + }; + }; + }; + }; + + funnel@4045000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x04045000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + qdss_funnel_in0: endpoint { + remote-endpoint = <&funnel0_out>; + }; + }; + + port@1 { + reg = <1>; + + qdss_funnel_in1: endpoint { + remote-endpoint = <&funnel1_out>; + }; + }; + }; + + out-ports { + port { + qdss_funnel_out: endpoint { + remote-endpoint = <&aoss_funnel_in7>; + }; + }; + }; + }; + + tpdm@4841000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x04841000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + prng_tpdm_out: endpoint { + remote-endpoint = <&dlct0_tpda_in19>; + }; + }; + }; + }; + + tpdm@4850000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x04850000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + pimem_tpdm_out: endpoint { + remote-endpoint = <&dlct0_tpda_in25>; + }; + }; + }; + }; + + tpdm@4860000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x04860000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + dlst_ch_tpdm0_out: endpoint { + remote-endpoint = <&dlst_ch_tpda_in8>; + }; + }; + }; + }; + + tpda@4864000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x04864000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@8 { + reg = <8>; + + dlst_ch_tpda_in8: endpoint { + remote-endpoint = <&dlst_ch_tpdm0_out>; + }; + }; + }; + + out-ports { + port { + dlst_ch_tpda_out: endpoint { + remote-endpoint = <&dlst_ch_funnel_in0>; + }; + }; + }; + }; + + funnel@4865000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x04865000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dlst_ch_funnel_in0: endpoint { + remote-endpoint = <&dlst_ch_tpda_out>; + }; + }; + + port@4 { + reg = <4>; + + dlst_ch_funnel_in4: endpoint { + remote-endpoint = <&dlst_funnel_out>; + }; + }; + + port@6 { + reg = <6>; + + dlst_ch_funnel_in6: endpoint { + remote-endpoint = <&gdsp_funnel_out>; + }; + }; + }; + + out-ports { + port { + dlst_ch_funnel_out: endpoint { + remote-endpoint = <&funnel1_in7>; + }; + }; + }; + }; + + tpdm@4980000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x04980000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + turing2_tpdm_out: endpoint { + remote-endpoint = <&turing2_funnel_in0>; + }; + }; + }; + }; + + funnel@4983000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x04983000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + turing2_funnel_in0: endpoint { + remote-endpoint = <&turing2_tpdm_out>; + }; + }; + }; + + out-ports { + port { + turing2_funnel_out0: endpoint { + remote-endpoint = <&gdsp_tpda_in5>; + }; + }; + }; + }; + + tpdm@4ac0000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x04ac0000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + dlmm_tpdm0_out: endpoint { + remote-endpoint = <&dlmm_tpda_in27>; + }; + }; + }; + }; + + tpda@4ac4000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x04ac4000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1b { + reg = <27>; + + dlmm_tpda_in27: endpoint { + remote-endpoint = <&dlmm_tpdm0_out>; + }; + }; + }; + + out-ports { + port { + dlmm_tpda_out: endpoint { + remote-endpoint = <&dlmm_funnel_in0>; + }; + }; + }; + }; + + funnel@4ac5000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x04ac5000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + dlmm_funnel_in0: endpoint { + remote-endpoint = <&dlmm_tpda_out>; + }; + }; + }; + + out-ports { + port { + dlmm_funnel_out: endpoint { + remote-endpoint = <&funnel1_in6>; + }; + }; + }; + }; + + tpdm@4ad0000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x04ad0000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + dlct0_tpdm0_out: endpoint { + remote-endpoint = <&dlct0_tpda_in26>; + }; + }; + }; + }; + + tpda@4ad3000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x04ad3000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@13 { + reg = <19>; + + dlct0_tpda_in19: endpoint { + remote-endpoint = <&prng_tpdm_out>; + }; + }; + + port@19 { + reg = <25>; + + dlct0_tpda_in25: endpoint { + remote-endpoint = <&pimem_tpdm_out>; + }; + }; + + port@1a { + reg = <26>; + + dlct0_tpda_in26: endpoint { + remote-endpoint = <&dlct0_tpdm0_out>; + }; + }; + }; + + out-ports { + port { + dlct0_tpda_out: endpoint { + remote-endpoint = <&dlct0_funnel_in0>; + }; + }; + }; + }; + + funnel@4ad4000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x04ad4000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dlct0_funnel_in0: endpoint { + remote-endpoint = <&dlct0_tpda_out>; + }; + }; + + port@4 { + reg = <4>; + + dlct0_funnel_in4: endpoint { + remote-endpoint = <&ddr_funnel5_out>; + }; + }; + }; + + out-ports { + port { + dlct0_funnel_out: endpoint { + remote-endpoint = <&funnel1_in5>; + }; + }; + }; + }; + + funnel@4b04000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x04b04000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@6 { + reg = <6>; + + aoss_funnel_in6: endpoint { + remote-endpoint = <&aoss_tpda_out>; + }; + }; + + port@7 { + reg = <7>; + + aoss_funnel_in7: endpoint { + remote-endpoint = <&qdss_funnel_out>; + }; + }; + }; + + out-ports { + port { + aoss_funnel_out: endpoint { + remote-endpoint = <&etf0_in>; + }; + }; + }; + }; + + tmc_etf: tmc@4b05000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x0 0x04b05000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + etf0_in: endpoint { + remote-endpoint = <&aoss_funnel_out>; + }; + }; + }; + + out-ports { + port { + etf0_out: endpoint { + remote-endpoint = <&swao_rep_in>; + }; + }; + }; + }; + + replicator@4b06000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0x0 0x04b06000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + swao_rep_in: endpoint { + remote-endpoint = <&etf0_out>; + }; + }; + }; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + swao_rep_out1: endpoint { + remote-endpoint = <&eud_in>; + }; + }; + }; + }; + + tpda@4b08000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x04b08000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + aoss_tpda_in0: endpoint { + remote-endpoint = <&aoss_tpdm0_out>; + }; + }; + + port@1 { + reg = <1>; + + aoss_tpda_in1: endpoint { + remote-endpoint = <&aoss_tpdm1_out>; + }; + }; + + port@2 { + reg = <2>; + + aoss_tpda_in2: endpoint { + remote-endpoint = <&aoss_tpdm2_out>; + }; + }; + + port@3 { + reg = <3>; + + aoss_tpda_in3: endpoint { + remote-endpoint = <&aoss_tpdm3_out>; + }; + }; + + port@4 { + reg = <4>; + + aoss_tpda_in4: endpoint { + remote-endpoint = <&aoss_tpdm4_out>; + }; + }; + }; + + out-ports { + port { + aoss_tpda_out: endpoint { + remote-endpoint = <&aoss_funnel_in6>; + }; + }; + }; + }; + + tpdm@4b09000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x04b09000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + aoss_tpdm0_out: endpoint { + remote-endpoint = <&aoss_tpda_in0>; + }; + }; + }; + }; + + tpdm@4b0a000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x04b0a000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + aoss_tpdm1_out: endpoint { + remote-endpoint = <&aoss_tpda_in1>; + }; + }; + }; + }; + + tpdm@4b0b000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x04b0b000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + aoss_tpdm2_out: endpoint { + remote-endpoint = <&aoss_tpda_in2>; + }; + }; + }; + }; + + tpdm@4b0c000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x04b0c000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + aoss_tpdm3_out: endpoint { + remote-endpoint = <&aoss_tpda_in3>; + }; + }; + }; + }; + + tpdm@4b0d000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x04b0d000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + aoss_tpdm4_out: endpoint { + remote-endpoint = <&aoss_tpda_in4>; + }; + }; + }; + }; + + cti@4b13000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x04b13000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + tpdm@4b80000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x04b80000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + turing0_tpdm0_out: endpoint { + remote-endpoint = <&turing0_tpda_in0>; + }; + }; + }; + }; + + tpda@4b86000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x04b86000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + turing0_tpda_in0: endpoint { + remote-endpoint = <&turing0_tpdm0_out>; + }; + }; + }; + + out-ports { + port { + turing0_tpda_out: endpoint { + remote-endpoint = <&turing0_funnel_in0>; + }; + }; + }; + }; + + funnel@4b87000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x04b87000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + turing0_funnel_in0: endpoint { + remote-endpoint = <&turing0_tpda_out>; + }; + }; + }; + + out-ports { + port { + turing0_funnel_out: endpoint { + remote-endpoint = <&gdsp_funnel_in4>; + }; + }; + }; + }; + + cti@4b8b000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x04b8b000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + tpdm@4c40000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x04c40000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + gdsp_tpdm0_out: endpoint { + remote-endpoint = <&gdsp_tpda_in8>; + }; + }; + }; + }; + + tpda@4c44000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x04c44000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@5 { + reg = <5>; + + gdsp_tpda_in5: endpoint { + remote-endpoint = <&turing2_funnel_out0>; + }; + }; + + port@8 { + reg = <8>; + + gdsp_tpda_in8: endpoint { + remote-endpoint = <&gdsp_tpdm0_out>; + }; + }; + }; + + out-ports { + port { + gdsp_tpda_out: endpoint { + remote-endpoint = <&gdsp_funnel_in0>; + }; + }; + }; + }; + + funnel@4c45000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x04c45000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + gdsp_funnel_in0: endpoint { + remote-endpoint = <&gdsp_tpda_out>; + }; + }; + + port@4 { + reg = <4>; + + gdsp_funnel_in4: endpoint { + remote-endpoint = <&turing0_funnel_out>; + }; + }; + }; + + out-ports { + port { + gdsp_funnel_out: endpoint { + remote-endpoint = <&dlst_ch_funnel_in6>; + }; + }; + }; + }; + + tpdm@4c50000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x04c50000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + dlst_tpdm0_out: endpoint { + remote-endpoint = <&dlst_tpda_in8>; + }; + }; + }; + }; + + tpda@4c54000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x04c54000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@8 { + reg = <8>; + + dlst_tpda_in8: endpoint { + remote-endpoint = <&dlst_tpdm0_out>; + }; + }; + }; + + out-ports { + port { + dlst_tpda_out: endpoint { + remote-endpoint = <&dlst_funnel_in0>; + }; + }; + }; + }; + + funnel@4c55000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x04c55000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + dlst_funnel_in0: endpoint { + remote-endpoint = <&dlst_tpda_out>; + }; + }; + }; + + out-ports { + port { + dlst_funnel_out: endpoint { + remote-endpoint = <&dlst_ch_funnel_in4>; + }; + }; + }; + }; + + tpdm@4e00000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x04e00000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + ddr_tpdm3_out: endpoint { + remote-endpoint = <&ddr_tpda_in4>; + }; + }; + }; + }; + + tpda@4e03000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x04e03000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ddr_tpda_in0: endpoint { + remote-endpoint = <&ddr_funnel0_out0>; + }; + }; + + port@1 { + reg = <1>; + + ddr_tpda_in1: endpoint { + remote-endpoint = <&ddr_funnel1_out0>; + }; + }; + + port@4 { + reg = <4>; + + ddr_tpda_in4: endpoint { + remote-endpoint = <&ddr_tpdm3_out>; + }; + }; + }; + + out-ports { + port { + ddr_tpda_out: endpoint { + remote-endpoint = <&ddr_funnel5_in0>; + }; + }; + }; + }; + + funnel@4e04000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x04e04000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + ddr_funnel5_in0: endpoint { + remote-endpoint = <&ddr_tpda_out>; + }; + }; + }; + + out-ports { + port { + ddr_funnel5_out: endpoint { + remote-endpoint = <&dlct0_funnel_in4>; + }; + }; + }; + }; + + tpdm@4e10000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x04e10000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + ddr_tpdm0_out: endpoint { + remote-endpoint = <&ddr_funnel0_in0>; + }; + }; + }; + }; + + funnel@4e12000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x04e12000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + ddr_funnel0_in0: endpoint { + remote-endpoint = <&ddr_tpdm0_out>; + }; + }; + }; + + out-ports { + port { + ddr_funnel0_out0: endpoint { + remote-endpoint = <&ddr_tpda_in0>; + }; + }; + }; + }; + + tpdm@4e20000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x04e20000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + ddr_tpdm1_out: endpoint { + remote-endpoint = <&ddr_funnel1_in0>; + }; + }; + }; + }; + + funnel@4e22000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x04e22000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + ddr_funnel1_in0: endpoint { + remote-endpoint = <&ddr_tpdm1_out>; + }; + }; + }; + + out-ports { + port { + ddr_funnel1_out0: endpoint { + remote-endpoint = <&ddr_tpda_in1>; + }; + }; + }; + }; + + etm@6040000 { + compatible = "arm,primecell"; + reg = <0x0 0x06040000 0x0 0x1000>; + cpu = <&cpu0>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&apss_funnel0_in0>; + }; + }; + }; + }; + + etm@6140000 { + compatible = "arm,primecell"; + reg = <0x0 0x06140000 0x0 0x1000>; + cpu = <&cpu1>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&apss_funnel0_in1>; + }; + }; + }; + }; + + etm@6240000 { + compatible = "arm,primecell"; + reg = <0x0 0x06240000 0x0 0x1000>; + cpu = <&cpu2>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&apss_funnel0_in2>; + }; + }; + }; + }; + + etm@6340000 { + compatible = "arm,primecell"; + reg = <0x0 0x06340000 0x0 0x1000>; + cpu = <&cpu3>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&apss_funnel0_in3>; + }; + }; + }; + }; + + etm@6440000 { + compatible = "arm,primecell"; + reg = <0x0 0x06440000 0x0 0x1000>; + cpu = <&cpu4>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = <&apss_funnel0_in4>; + }; + }; + }; + }; + + etm@6540000 { + compatible = "arm,primecell"; + reg = <0x0 0x06540000 0x0 0x1000>; + cpu = <&cpu5>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = <&apss_funnel0_in5>; + }; + }; + }; + }; + + etm@6640000 { + compatible = "arm,primecell"; + reg = <0x0 0x06640000 0x0 0x1000>; + cpu = <&cpu6>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = <&apss_funnel0_in6>; + }; + }; + }; + }; + + etm@6740000 { + compatible = "arm,primecell"; + reg = <0x0 0x06740000 0x0 0x1000>; + cpu = <&cpu7>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = <&apss_funnel0_in7>; + }; + }; + }; + }; + + funnel@6800000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x06800000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + apss_funnel0_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + + apss_funnel0_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + + apss_funnel0_in2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + + apss_funnel0_in3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + + port@4 { + reg = <4>; + + apss_funnel0_in4: endpoint { + remote-endpoint = <&etm4_out>; + }; + }; + + port@5 { + reg = <5>; + + apss_funnel0_in5: endpoint { + remote-endpoint = <&etm5_out>; + }; + }; + + port@6 { + reg = <6>; + + apss_funnel0_in6: endpoint { + remote-endpoint = <&etm6_out>; + }; + }; + + port@7 { + reg = <7>; + + apss_funnel0_in7: endpoint { + remote-endpoint = <&etm7_out>; + }; + }; + }; + + out-ports { + port { + apss_funnel0_out: endpoint { + remote-endpoint = <&apss_funnel1_in0>; + }; + }; + }; + }; + + funnel@6810000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x06810000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + apss_funnel1_in0: endpoint { + remote-endpoint = <&apss_funnel0_out>; + }; + }; + + port@3 { + reg = <3>; + + apss_funnel1_in3: endpoint { + remote-endpoint = <&apss_tpda_out>; + }; + }; + }; + + out-ports { + port { + apss_funnel1_out: endpoint { + remote-endpoint = <&funnel1_in4>; + }; + }; + }; + }; + + cti@682b000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x0682b000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + tpdm@6860000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x06860000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + apss_tpdm3_out: endpoint { + remote-endpoint = <&apss_tpda_in3>; + }; + }; + }; + }; + + tpdm@6861000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x06861000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + apss_tpdm4_out: endpoint { + remote-endpoint = <&apss_tpda_in4>; + }; + }; + }; + }; + + tpda@6863000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x06863000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + apss_tpda_in0: endpoint { + remote-endpoint = <&apss_tpdm0_out>; + }; + }; + + port@1 { + reg = <1>; + + apss_tpda_in1: endpoint { + remote-endpoint = <&apss_tpdm1_out>; + }; + }; + + port@2 { + reg = <2>; + + apss_tpda_in2: endpoint { + remote-endpoint = <&apss_tpdm2_out>; + }; + }; + + port@3 { + reg = <3>; + + apss_tpda_in3: endpoint { + remote-endpoint = <&apss_tpdm3_out>; + }; + }; + + port@4 { + reg = <4>; + + apss_tpda_in4: endpoint { + remote-endpoint = <&apss_tpdm4_out>; + }; + }; + }; + + out-ports { + port { + apss_tpda_out: endpoint { + remote-endpoint = <&apss_funnel1_in3>; + }; + }; + }; + }; + + tpdm@68a0000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x068a0000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + apss_tpdm1_out: endpoint { + remote-endpoint = <&apss_tpda_in1>; + }; + }; + }; + }; + + tpdm@68b0000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x068b0000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + apss_tpdm0_out: endpoint { + remote-endpoint = <&apss_tpda_in0>; + }; + }; + }; + }; + + tpdm@68c0000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x068c0000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + apss_tpdm2_out: endpoint { + remote-endpoint = <&apss_tpda_in2>; + }; + }; + }; + }; + + cti@68e0000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x068e0000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@68f0000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x068f0000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@6900000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06900000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + sdhc_1: mmc@87c4000 { + compatible = "qcom,qcs8300-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x087c4000 0x0 0x1000>, + <0x0 0x087c5000 0x0 0x1000>; + reg-names = "hc", + "cqhci"; + + interrupts = , + ; + interrupt-names = "hc_irq", + "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "core", + "xo"; + + resets = <&gcc GCC_SDCC1_BCR>; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&sdhc1_opp_table>; + iommus = <&apps_smmu 0x0 0x0>; + interconnects = <&aggre1_noc MASTER_SDC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_SDC1 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "sdhc-ddr", + "cpu-sdhc"; + + qcom,dll-config = <0x000f64ee>; + qcom,ddr-config = <0x80040868>; + supports-cqe; + dma-coherent; + + status = "disabled"; + + sdhc1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + usb_1_hsphy: phy@8904000 { + compatible = "qcom,qcs8300-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0x0 0x08904000 0x0 0x400>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_USB2_PHY_PRIM_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_2_hsphy: phy@8906000 { + compatible = "qcom,qcs8300-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0x0 0x08906000 0x0 0x400>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_USB2_PHY_SEC_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_qmpphy: phy@8907000 { + compatible = "qcom,qcs8300-qmp-usb3-uni-phy"; + reg = <0x0 0x08907000 0x0 0x2000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&gcc GCC_USB_CLKREF_EN>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "pipe"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3PHY_PHY_PRIM_BCR>; + reset-names = "phy", "phy_phy"; + + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + + #clock-cells = <0>; + clock-output-names = "usb3_prim_phy_pipe_clk_src"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + serdes0: phy@8909000 { + compatible = "qcom,qcs8300-dwmac-sgmii-phy", "qcom,sa8775p-dwmac-sgmii-phy"; + reg = <0x0 0x08909000 0x0 0x00000e10>; + clocks = <&gcc GCC_SGMI_CLKREF_EN>; + clock-names = "sgmi_ref"; + #phy-cells = <0>; + status = "disabled"; + }; + + refgen: regulator@891c000 { + compatible = "qcom,qcs8300-refgen-regulator", + "qcom,sm8250-refgen-regulator"; + reg = <0x0 0x0891c000 0x0 0x84>; + }; + + gpu: gpu@3d00000 { + compatible = "qcom,adreno-623.0", "qcom,adreno"; + reg = <0x0 0x03d00000 0x0 0x40000>, + <0x0 0x03d9e000 0x0 0x1000>, + <0x0 0x03d61000 0x0 0x800>; + reg-names = "kgsl_3d0_reg_memory", + "cx_mem", + "cx_dbgc"; + interrupts = ; + iommus = <&adreno_smmu 0 0xc00>, + <&adreno_smmu 1 0xc00>; + operating-points-v2 = <&gpu_opp_table>; + qcom,gmu = <&gmu>; + interconnects = <&gem_noc MASTER_GFX3D QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "gfx-mem"; + #cooling-cells = <2>; + + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + + status = "disabled"; + + gpu_zap_shader: zap-shader { + memory-region = <&gpu_microcode_mem>; + }; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-877000000 { + opp-hz = /bits/ 64 <877000000>; + opp-level = ; + opp-peak-kBps = <12484375>; + opp-supported-hw = <0x1>; + }; + + opp-780000000 { + opp-hz = /bits/ 64 <780000000>; + opp-level = ; + opp-peak-kBps = <10687500>; + opp-supported-hw = <0x1>; + }; + + opp-599000000 { + opp-hz = /bits/ 64 <599000000>; + opp-level = ; + opp-peak-kBps = <8171875>; + opp-supported-hw = <0x3>; + }; + + opp-479000000 { + opp-hz = /bits/ 64 <479000000>; + opp-level = ; + opp-peak-kBps = <5285156>; + opp-supported-hw = <0x3>; + }; + }; + }; + + gmu: gmu@3d6a000 { + compatible = "qcom,adreno-gmu-623.0", "qcom,adreno-gmu"; + reg = <0x0 0x03d6a000 0x0 0x34000>, + <0x0 0x03de0000 0x0 0x10000>, + <0x0 0x0b290000 0x0 0x10000>; + reg-names = "gmu", "rscc", "gmu_pdc"; + interrupts = , + ; + interrupt-names = "hfi", "gmu"; + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>; + clock-names = "gmu", + "cxo", + "axi", + "memnoc", + "ahb", + "hub"; + power-domains = <&gpucc GPU_CC_CX_GDSC>, + <&gpucc GPU_CC_GX_GDSC>; + power-domain-names = "cx", + "gx"; + iommus = <&adreno_smmu 5 0xc00>; + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-level = ; + }; + }; + }; + + gpucc: clock-controller@3d90000 { + compatible = "qcom,qcs8300-gpucc"; + reg = <0x0 0x03d90000 0x0 0xa000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@3da0000 { + compatible = "qcom,qcs8300-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x3da0000 0x0 0x20000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HUB_AON_CLK>; + + clock-names = "gcc_gpu_memnoc_gfx_clk", + "gcc_gpu_snoc_dvm_gfx_clk", + "gpu_cc_ahb_clk", + "gpu_cc_hlos1_vote_gpu_smmu_clk", + "gpu_cc_cx_gmu_clk", + "gpu_cc_hub_cx_int_clk", + "gpu_cc_hub_aon_clk"; + power-domains = <&gpucc GPU_CC_CX_GDSC>; + dma-coherent; + }; + + pmu@9091000 { + compatible = "qcom,qcs8300-llcc-bwmon", "qcom,sc7280-llcc-bwmon"; + reg = <0x0 0x9091000 0x0 0x1000>; + + interrupts = ; + + interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&llcc_bwmon_opp_table>; + + llcc_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <762000>; + }; + + opp-1 { + opp-peak-kBps = <1720000>; + }; + + opp-2 { + opp-peak-kBps = <2086000>; + }; + + opp-3 { + opp-peak-kBps = <2601000>; + }; + + opp-4 { + opp-peak-kBps = <2929000>; + }; + + opp-5 { + opp-peak-kBps = <5931000>; + }; + + opp-6 { + opp-peak-kBps = <6515000>; + }; + + opp-7 { + opp-peak-kBps = <7984000>; + }; + + opp-8 { + opp-peak-kBps = <10437000>; + }; + + opp-9 { + opp-peak-kBps = <12195000>; + }; + }; + }; + + pmu@90b5400 { + compatible = "qcom,qcs8300-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0x0 0x90b5400 0x0 0x600>; + interrupts = ; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <9155000>; + }; + + opp-1 { + opp-peak-kBps = <12298000>; + }; + + opp-2 { + opp-peak-kBps = <14236000>; + }; + + opp-3 { + opp-peak-kBps = <16265000>; + }; + }; + }; + + pmu@90b6400 { + compatible = "qcom,qcs8300-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0x0 0x90b6400 0x0 0x600>; + interrupts = ; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + }; + + dc_noc: interconnect@90e0000 { + compatible = "qcom,qcs8300-dc-noc"; + reg = <0x0 0x090e0000 0x0 0x5080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect@9100000 { + compatible = "qcom,qcs8300-gem-noc"; + reg = <0x0 0x9100000 0x0 0xf7080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + llcc: system-cache-controller@9200000 { + compatible = "qcom,qcs8300-llcc"; + reg = <0x0 0x09200000 0x0 0x80000>, + <0x0 0x09300000 0x0 0x80000>, + <0x0 0x09400000 0x0 0x80000>, + <0x0 0x09500000 0x0 0x80000>, + <0x0 0x09a00000 0x0 0x80000>; + reg-names = "llcc0_base", + "llcc1_base", + "llcc2_base", + "llcc3_base", + "llcc_broadcast_base"; + interrupts = ; + }; + + usb_1: usb@a600000 { + compatible = "qcom,qcs8300-dwc3", "qcom,snps-dwc3"; + reg = <0x0 0x0a600000 0x0 0xfc100>; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dwc_usb3", + "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "usb-ddr", "apps-usb"; + + iommus = <&apps_smmu 0x80 0x0>; + phys = <&usb_1_hsphy>, <&usb_qmpphy>; + phy-names = "usb2-phy", "usb3-phy"; + snps,dis_enblslpm_quirk; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + + wakeup-source; + + status = "disabled"; + }; + + usb_2: usb@a400000 { + compatible = "qcom,qcs8300-dwc3", "qcom,snps-dwc3"; + reg = <0x0 0x0a400000 0x0 0xfc100>; + + clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>, + <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>, + <&gcc GCC_USB20_SLEEP_CLK>, + <&gcc GCC_USB20_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, + <&gcc GCC_USB20_MASTER_CLK>; + assigned-clock-rates = <19200000>, <120000000>; + + interrupts-extended = <&intc GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 10 IRQ_TYPE_EDGE_BOTH>, + <&pdc 9 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "dwc_usb3", + "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq"; + + power-domains = <&gcc GCC_USB20_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB20_PRIM_BCR>; + + interconnects = <&aggre1_noc MASTER_USB2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_USB2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "usb-ddr", "apps-usb"; + + iommus = <&apps_smmu 0x20 0x0>; + + phys = <&usb_2_hsphy>; + phy-names = "usb2-phy"; + maximum-speed = "high-speed"; + + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + snps,dis_enblslpm_quirk; + + qcom,select-utmi-as-pipe-clk; + wakeup-source; + + status = "disabled"; + }; + + iris: video-codec@aa00000 { + compatible = "qcom,qcs8300-iris"; + + reg = <0x0 0x0aa00000 0x0 0xf0000>; + interrupts = ; + + power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>, + <&videocc VIDEO_CC_MVS0_GDSC>, + <&rpmhpd RPMHPD_MX>, + <&rpmhpd RPMHPD_MMCX>; + power-domain-names = "venus", + "vcodec0", + "mxc", + "mmcx"; + + operating-points-v2 = <&iris_opp_table>; + + clocks = <&gcc GCC_VIDEO_AXI0_CLK>, + <&videocc VIDEO_CC_MVS0C_CLK>, + <&videocc VIDEO_CC_MVS0_CLK>; + clock-names = "iface", + "core", + "vcodec0_core"; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>, + <&mmss_noc MASTER_VIDEO_P0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "cpu-cfg", + "video-mem"; + + memory-region = <&video_mem>; + + resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>; + reset-names = "bus"; + + iommus = <&apps_smmu 0x0880 0x0400>, + <&apps_smmu 0x0887 0x0400>; + dma-coherent; + + status = "disabled"; + + iris_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-366000000 { + opp-hz = /bits/ 64 <366000000>; + required-opps = <&rpmhpd_opp_svs_l1>, + <&rpmhpd_opp_svs_l1>; + }; + + opp-444000000 { + opp-hz = /bits/ 64 <444000000>; + required-opps = <&rpmhpd_opp_nom>, + <&rpmhpd_opp_nom>; + }; + + opp-533000000 { + opp-hz = /bits/ 64 <533000000>; + required-opps = <&rpmhpd_opp_turbo>, + <&rpmhpd_opp_turbo>; + }; + + opp-560000000 { + opp-hz = /bits/ 64 <560000000>; + required-opps = <&rpmhpd_opp_turbo_l1>, + <&rpmhpd_opp_turbo_l1>; + }; + }; + }; + + videocc: clock-controller@abf0000 { + compatible = "qcom,qcs8300-videocc"; + reg = <0x0 0x0abf0000 0x0 0x10000>; + clocks = <&gcc GCC_VIDEO_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + camcc: clock-controller@ade0000 { + compatible = "qcom,qcs8300-camcc"; + reg = <0x0 0x0ade0000 0x0 0x20000>; + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sa8775p-dispcc0"; + reg = <0x0 0x0af00000 0x0 0x20000>; + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>, + <0>, <0>, <0>, <0>, + <0>, <0>, <0>, <0>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,qcs8300-pdc", "qcom,pdc"; + reg = <0x0 0xb220000 0x0 0x30000>, + <0x0 0x17c000f0 0x0 0x64>; + interrupt-parent = <&intc>; + #interrupt-cells = <2>; + interrupt-controller; + qcom,pdc-ranges = <0 480 40>, + <40 140 14>, + <54 263 1>, + <55 306 4>, + <59 312 3>, + <62 374 2>, + <64 434 2>, + <66 438 2>, + <70 520 1>, + <73 523 1>, + <118 568 6>, + <124 609 3>, + <159 638 1>, + <160 720 3>, + <169 728 30>, + <199 416 2>, + <201 449 1>, + <202 89 1>, + <203 451 1>, + <204 462 1>, + <205 264 1>, + <206 579 1>, + <207 653 1>, + <208 656 1>, + <209 659 1>, + <210 122 1>, + <211 699 1>, + <212 705 1>, + <213 450 1>, + <214 643 2>, + <216 646 5>, + <221 390 5>, + <226 700 2>, + <228 440 1>, + <229 663 1>, + <230 524 2>, + <232 612 3>, + <235 723 5>; + }; + + aoss_qmp: power-management@c300000 { + compatible = "qcom,qcs8300-aoss-qmp", "qcom,aoss-qmp"; + reg = <0x0 0x0c300000 0x0 0x400>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + #clock-cells = <0>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0x0 0x0c3f0000 0x0 0x400>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0x0c440000 0x0 0x1100>, + <0x0 0x0c600000 0x0 0x2000000>, + <0x0 0x0e600000 0x0 0x100000>, + <0x0 0x0e700000 0x0 0xa0000>, + <0x0 0x0c40a000 0x0 0x26000>; + reg-names = "core", + "chnls", + "obsrvr", + "intr", + "cnfg"; + qcom,channel = <0>; + qcom,ee = <0>; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + interrupt-controller; + #interrupt-cells = <4>; + #address-cells = <2>; + #size-cells = <0>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,qcs8300-tlmm"; + reg = <0x0 0x0f100000 0x0 0x300000>; + interrupts = ; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 134>; + interrupt-controller; + #interrupt-cells = <2>; + wakeup-parent = <&pdc>; + + hs0_mi2s_active: hs0-mi2s-active-state { + pins = "gpio106", "gpio107", "gpio108", "gpio109"; + function = "hs0_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + mi2s1_active: mi2s1-active-state { + data0-pins { + pins = "gpio100"; + function = "mi2s1_data0"; + drive-strength = <8>; + bias-disable; + }; + + data1-pins { + pins = "gpio101"; + function = "mi2s1_data1"; + drive-strength = <8>; + bias-disable; + }; + + sclk-pins { + pins = "gpio98"; + function = "mi2s1_sck"; + drive-strength = <8>; + bias-disable; + }; + + ws-pins { + pins = "gpio99"; + function = "mi2s1_ws"; + drive-strength = <8>; + bias-disable; + }; + }; + + qup_i2c0_data_clk: qup-i2c0-data-clk-state { + pins = "gpio17", "gpio18"; + function = "qup0_se0"; + }; + + qup_i2c1_data_clk: qup-i2c1-data-clk-state { + pins = "gpio19", "gpio20"; + function = "qup0_se1"; + }; + + qup_i2c2_data_clk: qup-i2c2-data-clk-state { + pins = "gpio33", "gpio34"; + function = "qup0_se2"; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk-state { + pins = "gpio25", "gpio26"; + function = "qup0_se3"; + }; + + qup_i2c4_data_clk: qup-i2c4-data-clk-state { + pins = "gpio29", "gpio30"; + function = "qup0_se4"; + }; + + qup_i2c5_data_clk: qup-i2c5-data-clk-state { + pins = "gpio21", "gpio22"; + function = "qup0_se5"; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk-state { + pins = "gpio80", "gpio81"; + function = "qup0_se6"; + }; + + qup_i2c8_data_clk: qup-i2c8-data-clk-state { + pins = "gpio37", "gpio38"; + function = "qup1_se0"; + }; + + qup_i2c9_data_clk: qup-i2c9-data-clk-state { + pins = "gpio39", "gpio40"; + function = "qup1_se1"; + }; + + qup_i2c10_data_clk: qup-i2c10-data-clk-state { + pins = "gpio84", "gpio85"; + function = "qup1_se2"; + }; + + qup_i2c11_data_clk: qup-i2c11-data-clk-state { + pins = "gpio41", "gpio42"; + function = "qup1_se3"; + }; + + qup_i2c12_data_clk: qup-i2c12-data-clk-state { + pins = "gpio45", "gpio46"; + function = "qup1_se4"; + }; + + qup_i2c13_data_clk: qup-i2c13-data-clk-state { + pins = "gpio49", "gpio50"; + function = "qup1_se5"; + }; + + qup_i2c14_data_clk: qup-i2c14-data-clk-state { + pins = "gpio89", "gpio90"; + function = "qup1_se6"; + }; + + qup_i2c15_data_clk: qup-i2c15-data-clk-state { + pins = "gpio91", "gpio92"; + function = "qup1_se7"; + }; + + qup_i2c16_data_clk: qup-i2c16-data-clk-state { + pins = "gpio10", "gpio11"; + function = "qup2_se0"; + }; + + qup_spi0_data_clk: qup-spi0-data-clk-state { + pins = "gpio17", "gpio18", "gpio19"; + function = "qup0_se0"; + }; + + qup_spi0_cs: qup-spi0-cs-state { + pins = "gpio20"; + function = "qup0_se0"; + }; + + qup_spi0_cs_gpio: qup-spi0-cs-gpio-state { + pins = "gpio20"; + function = "gpio"; + }; + + qup_spi1_data_clk: qup-spi1-data-clk-state { + pins = "gpio19", "gpio20", "gpio17"; + function = "qup0_se1"; + }; + + qup_spi1_cs: qup-spi1-cs-state { + pins = "gpio18"; + function = "qup0_se1"; + }; + + qup_spi1_cs_gpio: qup-spi1-cs-gpio-state { + pins = "gpio18"; + function = "gpio"; + }; + + qup_spi2_data_clk: qup-spi2-data-clk-state { + pins = "gpio33", "gpio34", "gpio35"; + function = "qup0_se2"; + }; + + qup_spi2_cs: qup-spi2-cs-state { + pins = "gpio36"; + function = "qup0_se2"; + }; + + qup_spi2_cs_gpio: qup-spi2-cs-gpio-state { + pins = "gpio36"; + function = "gpio"; + }; + + qup_spi3_data_clk: qup-spi3-data-clk-state { + pins = "gpio25", "gpio26", "gpio27"; + function = "qup0_se3"; + }; + + qup_spi3_cs: qup-spi3-cs-state { + pins = "gpio28"; + function = "qup0_se3"; + }; + + qup_spi3_cs_gpio: qup-spi3-cs-gpio-state { + pins = "gpio28"; + function = "gpio"; + }; + + qup_spi4_data_clk: qup-spi4-data-clk-state { + pins = "gpio29", "gpio30", "gpio31"; + function = "qup0_se4"; + }; + + qup_spi4_cs: qup-spi4-cs-state { + pins = "gpio32"; + function = "qup0_se4"; + }; + + qup_spi4_cs_gpio: qup-spi4-cs-gpio-state { + pins = "gpio32"; + function = "gpio"; + }; + + qup_spi5_data_clk: qup-spi5-data-clk-state { + pins = "gpio21", "gpio22", "gpio23"; + function = "qup0_se5"; + }; + + qup_spi5_cs: qup-spi5-cs-state { + pins = "gpio24"; + function = "qup0_se5"; + }; + + qup_spi5_cs_gpio: qup-spi5-cs-gpio-state { + pins = "gpio24"; + function = "gpio"; + }; + + qup_spi6_data_clk: qup-spi6-data-clk-state { + pins = "gpio80", "gpio81", "gpio82"; + function = "qup0_se6"; + }; + + qup_spi6_cs: qup-spi6-cs-state { + pins = "gpio83"; + function = "qup0_se6"; + }; + + qup_spi6_cs_gpio: qup-spi6-cs-gpio-state { + pins = "gpio83"; + function = "gpio"; + }; + + qup_spi8_data_clk: qup-spi8-data-clk-state { + pins = "gpio37", "gpio38", "gpio39"; + function = "qup1_se0"; + }; + + qup_spi8_cs: qup-spi8-cs-state { + pins = "gpio40"; + function = "qup1_se0"; + }; + + qup_spi8_cs_gpio: qup-spi8-cs-gpio-state { + pins = "gpio40"; + function = "gpio"; + }; + + qup_spi9_data_clk: qup-spi9-data-clk-state { + pins = "gpio39", "gpio40", "gpio37"; + function = "qup1_se1"; + }; + + qup_spi9_cs: qup-spi9-cs-state { + pins = "gpio38"; + function = "qup1_se1"; + }; + + qup_spi9_cs_gpio: qup-spi9-cs-gpio-state { + pins = "gpio38"; + function = "gpio"; + }; + + qup_spi10_data_clk: qup-spi10-data-clk-state { + pins = "gpio84", "gpio85", "gpio86"; + function = "qup1_se2"; + }; + + qup_spi10_cs: qup-spi10-cs-state { + pins = "gpio87"; + function = "qup1_se2"; + }; + + qup_spi10_cs_gpio: qup-spi10-cs-gpio-state { + pins = "gpio87"; + function = "gpio"; + }; + + qup_spi12_data_clk: qup-spi12-data-clk-state { + pins = "gpio45", "gpio46", "gpio47"; + function = "qup1_se4"; + }; + + qup_spi12_cs: qup-spi12-cs-state { + pins = "gpio48"; + function = "qup1_se4"; + }; + + qup_spi12_cs_gpio: qup-spi12-cs-gpio-state { + pins = "gpio48"; + function = "gpio"; + }; + + qup_spi13_data_clk: qup-spi13-data-clk-state { + pins = "gpio49", "gpio50", "gpio51"; + function = "qup1_se5"; + }; + + qup_spi13_cs: qup-spi13-cs-state { + pins = "gpio52"; + function = "qup1_se5"; + }; + + qup_spi13_cs_gpio: qup-spi13-cs-gpio-state { + pins = "gpio52"; + function = "gpio"; + }; + + qup_spi14_data_clk: qup-spi14-data-clk-state { + pins = "gpio89", "gpio90", "gpio91"; + function = "qup1_se6"; + }; + + qup_spi14_cs: qup-spi14-cs-state { + pins = "gpio92"; + function = "qup1_se6"; + }; + + qup_spi14_cs_gpio: qup-spi14-cs-gpio-state { + pins = "gpio92"; + function = "gpio"; + }; + + qup_spi15_data_clk: qup-spi15-data-clk-state { + pins = "gpio91", "gpio92", "gpio89"; + function = "qup1_se7"; + }; + + qup_spi15_cs: qup-spi15-cs-state { + pins = "gpio90"; + function = "qup1_se7"; + }; + + qup_spi15_cs_gpio: qup-spi15-cs-gpio-state { + pins = "gpio90"; + function = "gpio"; + }; + + qup_spi16_data_clk: qup-spi16-data-clk-state { + pins = "gpio10", "gpio11", "gpio12"; + function = "qup2_se0"; + }; + + qup_spi16_cs: qup-spi16-cs-state { + pins = "gpio13"; + function = "qup2_se0"; + }; + + qup_spi16_cs_gpio: qup-spi16-cs-gpio-state { + pins = "gpio13"; + function = "gpio"; + }; + + qup_uart0_cts: qup-uart0-cts-state { + pins = "gpio17"; + function = "qup0_se0"; + }; + + qup_uart0_rts: qup-uart0-rts-state { + pins = "gpio18"; + function = "qup0_se0"; + }; + + qup_uart0_tx: qup-uart0-tx-state { + pins = "gpio19"; + function = "qup0_se0"; + }; + + qup_uart0_rx: qup-uart0-rx-state { + pins = "gpio20"; + function = "qup0_se0"; + }; + + qup_uart1_cts: qup-uart1-cts-state { + pins = "gpio19"; + function = "qup0_se1"; + }; + + qup_uart1_rts: qup-uart1-rts-state { + pins = "gpio20"; + function = "qup0_se1"; + }; + + qup_uart1_tx: qup-uart1-tx-state { + pins = "gpio17"; + function = "qup0_se1"; + }; + + qup_uart1_rx: qup-uart1-rx-state { + pins = "gpio18"; + function = "qup0_se1"; + }; + + qup_uart2_cts: qup-uart2-cts-state { + pins = "gpio33"; + function = "qup0_se2"; + }; + + qup_uart2_rts: qup-uart2-rts-state { + pins = "gpio34"; + function = "qup0_se2"; + }; + + qup_uart2_tx: qup-uart2-tx-state { + pins = "gpio35"; + function = "qup0_se2"; + }; + + qup_uart2_rx: qup-uart2-rx-state { + pins = "gpio36"; + function = "qup0_se2"; + }; + + qup_uart3_cts: qup-uart3-cts-state { + pins = "gpio25"; + function = "qup0_se3"; + }; + + qup_uart3_rts: qup-uart3-rts-state { + pins = "gpio26"; + function = "qup0_se3"; + }; + + qup_uart3_tx: qup-uart3-tx-state { + pins = "gpio27"; + function = "qup0_se3"; + }; + + qup_uart3_rx: qup-uart3-rx-state { + pins = "gpio28"; + function = "qup0_se3"; + }; + + qup_uart4_cts: qup-uart4-cts-state { + pins = "gpio29"; + function = "qup0_se4"; + }; + + qup_uart4_rts: qup-uart4-rts-state { + pins = "gpio30"; + function = "qup0_se4"; + }; + + qup_uart4_tx: qup-uart4-tx-state { + pins = "gpio31"; + function = "qup0_se4"; + }; + + qup_uart4_rx: qup-uart4-rx-state { + pins = "gpio32"; + function = "qup0_se4"; + }; + + qup_uart5_cts: qup-uart5-cts-state { + pins = "gpio21"; + function = "qup0_se5"; + }; + + qup_uart5_rts: qup-uart5-rts-state { + pins = "gpio22"; + function = "qup0_se5"; + }; + + qup_uart5_tx: qup-uart5-tx-state { + pins = "gpio23"; + function = "qup0_se5"; + }; + + qup_uart5_rx: qup-uart5-rx-state { + pins = "gpio23"; + function = "qup0_se5"; + }; + + qup_uart6_cts: qup-uart6-cts-state { + pins = "gpio80"; + function = "qup0_se6"; + }; + + qup_uart6_rts: qup-uart6-rts-state { + pins = "gpio81"; + function = "qup0_se6"; + }; + + qup_uart6_tx: qup-uart6-tx-state { + pins = "gpio82"; + function = "qup0_se6"; + }; + + qup_uart6_rx: qup-uart6-rx-state { + pins = "gpio83"; + function = "qup0_se6"; + }; + + qup_uart7_tx: qup-uart7-tx-state { + pins = "gpio43"; + function = "qup0_se7"; + }; + + qup_uart7_rx: qup-uart7-rx-state { + pins = "gpio44"; + function = "qup0_se7"; + }; + + qup_uart8_cts: qup-uart8-cts-state { + pins = "gpio37"; + function = "qup1_se0"; + }; + + qup_uart8_rts: qup-uart8-rts-state { + pins = "gpio38"; + function = "qup1_se0"; + }; + + qup_uart8_tx: qup-uart8-tx-state { + pins = "gpio39"; + function = "qup1_se0"; + }; + + qup_uart8_rx: qup-uart8-rx-state { + pins = "gpio40"; + function = "qup1_se0"; + }; + + qup_uart9_cts: qup-uart9-cts-state { + pins = "gpio39"; + function = "qup1_se1"; + }; + + qup_uart9_rts: qup-uart9-rts-state { + pins = "gpio40"; + function = "qup1_se1"; + }; + + qup_uart9_tx: qup-uart9-tx-state { + pins = "gpio37"; + function = "qup1_se1"; + }; + + qup_uart9_rx: qup-uart9-rx-state { + pins = "gpio38"; + function = "qup1_se1"; + }; + + qup_uart10_cts: qup-uart10-cts-state { + pins = "gpio84"; + function = "qup1_se2"; + }; + + qup_uart10_rts: qup-uart10-rts-state { + pins = "gpio84"; + function = "qup1_se2"; + }; + + qup_uart10_tx: qup-uart10-tx-state { + pins = "gpio85"; + function = "qup1_se2"; + }; + + qup_uart10_rx: qup-uart10-rx-state { + pins = "gpio87"; + function = "qup1_se2"; + }; + + qup_uart11_tx: qup-uart11-tx-state { + pins = "gpio41"; + function = "qup1_se3"; + }; + + qup_uart11_rx: qup-uart11-rx-state { + pins = "gpio42"; + function = "qup1_se3"; + }; + + qup_uart12_cts: qup-uart12-cts-state { + pins = "gpio45"; + function = "qup1_se4"; + }; + + qup_uart12_rts: qup-uart12-rts-state { + pins = "gpio46"; + function = "qup1_se4"; + }; + + qup_uart12_tx: qup-uart12-tx-state { + pins = "gpio47"; + function = "qup1_se4"; + }; + + qup_uart12_rx: qup-uart12-rx-state { + pins = "gpio48"; + function = "qup1_se4"; + }; + + qup_uart13_cts: qup-uart13-cts-state { + pins = "gpio49"; + function = "qup1_se5"; + }; + + qup_uart13_rts: qup-uart13-rts-state { + pins = "gpio50"; + function = "qup1_se5"; + }; + + qup_uart13_tx: qup-uart13-tx-state { + pins = "gpio51"; + function = "qup1_se5"; + }; + + qup_uart13_rx: qup-uart13-rx-state { + pins = "gpio52"; + function = "qup1_se5"; + }; + + qup_uart14_cts: qup-uart14-cts-state { + pins = "gpio89"; + function = "qup1_se6"; + }; + + qup_uart14_rts: qup-uart14-rts-state { + pins = "gpio90"; + function = "qup1_se6"; + }; + + qup_uart14_tx: qup-uart14-tx-state { + pins = "gpio91"; + function = "qup1_se6"; + }; + + qup_uart14_rx: qup-uart14-rx-state { + pins = "gpio92"; + function = "qup1_se6"; + }; + + qup_uart15_cts: qup-uart15-cts-state { + pins = "gpio91"; + function = "qup1_se7"; + }; + + qup_uart15_rts: qup-uart15-rts-state { + pins = "gpio92"; + function = "qup1_se7"; + }; + + qup_uart15_tx: qup-uart15-tx-state { + pins = "gpio89"; + function = "qup1_se7"; + }; + + qup_uart15_rx: qup-uart15-rx-state { + pins = "gpio90"; + function = "qup1_se7"; + }; + + qup_uart16_cts: qup-uart16-cts-state { + pins = "gpio10"; + function = "qup2_se0"; + }; + + qup_uart16_rts: qup-uart16-rts-state { + pins = "gpio11"; + function = "qup2_se0"; + }; + + qup_uart16_tx: qup-uart16-tx-state { + pins = "gpio12"; + function = "qup2_se0"; + }; + + qup_uart16_rx: qup-uart16-rx-state { + pins = "gpio13"; + function = "qup2_se0"; + }; + + sdc1_state_on: sdc1-on-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_state_off: sdc1-off-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <2>; + bias-bus-hold; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <2>; + bias-bus-hold; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <2>; + bias-bus-hold; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-bus-hold; + }; + }; + }; + + sram: sram@146d8000 { + compatible = "qcom,qcs8300-imem", "syscon", "simple-mfd"; + reg = <0x0 0x146d8000 0x0 0x1000>; + ranges = <0x0 0x0 0x146d8000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,qcs8300-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + + reg = <0x0 0x15000000 0x0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + dma-coherent; + + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + pcie_smmu: iommu@15200000 { + compatible = "qcom,qcs8300-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x15200000 0x0 0x80000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + dma-coherent; + + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x17a00000 0x0 0x10000>, + <0x0 0x17a60000 0x0 0x100000>; + interrupts = ; + #interrupt-cells = <3>; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + }; + + watchdog@17c10000 { + compatible = "qcom,apss-wdt-qcs8300", "qcom,kpss-wdt"; + reg = <0x0 0x17c10000 0x0 0x1000>; + clocks = <&sleep_clk>; + interrupts = ; + }; + + timer@17c20000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17c20000 0x0 0x1000>; + ranges = <0x0 0x0 0x0 0x20000000>; + #address-cells = <1>; + #size-cells = <1>; + + frame@17c21000 { + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; + frame-number = <0>; + interrupts = , + ; + }; + + frame@17c23000 { + reg = <0x17c23000 0x1000>; + frame-number = <1>; + interrupts = ; + status = "disabled"; + }; + + frame@17c25000 { + reg = <0x17c25000 0x1000>; + frame-number = <2>; + interrupts = ; + status = "disabled"; + }; + + frame@17c27000 { + reg = <0x17c27000 0x1000>; + frame-number = <3>; + interrupts = ; + status = "disabled"; + }; + + frame@17c29000 { + reg = <0x17c29000 0x1000>; + frame-number = <4>; + interrupts = ; + status = "disabled"; + }; + + frame@17c2b000 { + reg = <0x17c2b000 0x1000>; + frame-number = <5>; + interrupts = ; + status = "disabled"; + }; + + frame@17c2d000 { + reg = <0x17c2d000 0x1000>; + frame-number = <6>; + interrupts = ; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", + "drv-1", + "drv-2"; + interrupts = , + , + ; + + power-domains = <&system_pd>; + label = "apps_rsc"; + + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = , + , + , + ; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sa8775p-rpmh-clk"; + #clock-cells = <1>; + clocks = <&xo_board_clk>; + clock-names = "xo"; + }; + + rpmhpd: power-controller { + compatible = "qcom,qcs8300-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp-0 { + opp-level = ; + }; + + rpmhpd_opp_min_svs: opp-1 { + opp-level = ; + }; + + rpmhpd_opp_low_svs: opp-2 { + opp-level = ; + }; + + rpmhpd_opp_svs: opp-3 { + opp-level = ; + }; + + rpmhpd_opp_svs_l1: opp-4 { + opp-level = ; + }; + + rpmhpd_opp_nom: opp-5 { + opp-level = ; + }; + + rpmhpd_opp_nom_l1: opp-6 { + opp-level = ; + }; + + rpmhpd_opp_nom_l2: opp-7 { + opp-level = ; + }; + + rpmhpd_opp_turbo: opp-8 { + opp-level = ; + }; + + rpmhpd_opp_turbo_l1: opp-9 { + opp-level = ; + }; + }; + }; + }; + + epss_l3_cl0: interconnect@18590000 { + compatible = "qcom,qcs8300-epss-l3", "qcom,sa8775p-epss-l3", + "qcom,epss-l3"; + reg = <0x0 0x18590000 0x0 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + #interconnect-cells = <1>; + }; + + cpufreq_hw: cpufreq@18591000 { + compatible = "qcom,qcs8300-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0x0 0x18591000 0x0 0x1000>, + <0x0 0x18593000 0x0 0x1000>, + <0x0 0x18594000 0x0 0x1000>; + reg-names = "freq-domain0", + "freq-domain1", + "freq-domain2"; + + interrupts = , + , + ; + interrupt-names = "dcvsh-irq-0", + "dcvsh-irq-1", + "dcvsh-irq-2"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; + + epss_l3_cl1: interconnect@18592000 { + compatible = "qcom,qcs8300-epss-l3", "qcom,sa8775p-epss-l3", + "qcom,epss-l3"; + reg = <0x0 0x18592000 0x0 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + #interconnect-cells = <1>; + }; + + remoteproc_gpdsp: remoteproc@20c00000 { + compatible = "qcom,qcs8300-gpdsp-pas", "qcom,sa8775p-gpdsp0-pas"; + reg = <0x0 0x20c00000 0x0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 768 IRQ_TYPE_EDGE_RISING>, + <&smp2p_gpdsp_in 0 0>, + <&smp2p_gpdsp_in 1 0>, + <&smp2p_gpdsp_in 2 0>, + <&smp2p_gpdsp_in 3 0>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MXC>; + power-domain-names = "cx", + "mxc"; + + interconnects = <&gpdsp_anoc MASTER_DSP0 QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_CLK_CTL QCOM_ICC_TAG_ALWAYS>; + + memory-region = <&gpdsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_gpdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0 + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_GPDSP0 + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "gpdsp"; + qcom,remote-pid = <17>; + }; + }; + + ethernet0: ethernet@23040000 { + compatible = "qcom,qcs8300-ethqos", "qcom,sa8775p-ethqos"; + reg = <0x0 0x23040000 0x0 0x00010000>, + <0x0 0x23056000 0x0 0x00000100>; + reg-names = "stmmaceth", "rgmii"; + + interrupts = , + ; + interrupt-names = "macirq", "sfty"; + + clocks = <&gcc GCC_EMAC0_AXI_CLK>, + <&gcc GCC_EMAC0_SLV_AHB_CLK>, + <&gcc GCC_EMAC0_PTP_CLK>, + <&gcc GCC_EMAC0_PHY_AUX_CLK>; + clock-names = "stmmaceth", + "pclk", + "ptp_ref", + "phyaux"; + power-domains = <&gcc GCC_EMAC0_GDSC>; + + phys = <&serdes0>; + phy-names = "serdes"; + + iommus = <&apps_smmu 0x120 0xf>; + dma-coherent; + + snps,tso; + snps,pbl = <32>; + rx-fifo-depth = <16384>; + tx-fifo-depth = <20480>; + + status = "disabled"; + }; + + nspa_noc: interconnect@260c0000 { + compatible = "qcom,qcs8300-nspa-noc"; + reg = <0x0 0x260c0000 0x0 0x16080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + remoteproc_cdsp: remoteproc@26300000 { + compatible = "qcom,qcs8300-cdsp-pas", "qcom,sa8775p-cdsp0-pas"; + reg = <0x0 0x26300000 0x0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MXC>, + <&rpmhpd RPMHPD_NSP0>; + + power-domain-names = "cx", + "mxc", + "nsp"; + + interconnects = <&nspa_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + + memory-region = <&cdsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "cdsp"; + qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x19c1 0x0440>, + <&apps_smmu 0x1961 0x0400>; + dma-coherent; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x19c2 0x0440>, + <&apps_smmu 0x1962 0x0400>; + dma-coherent; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x19c3 0x0440>, + <&apps_smmu 0x1963 0x0400>; + dma-coherent; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x19c4 0x0440>, + <&apps_smmu 0x1964 0x0400>; + dma-coherent; + }; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts index 887764dc55b21a..93d5ea279cff1e 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts @@ -79,6 +79,19 @@ led-0 { }; }; + reg_ts_vcca: regulator-vcca-ts { + compatible = "regulator-fixed"; + regulator-name = "regulator-vcca-ts"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 78 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&ts_vcca_default>; + pinctrl-names = "default"; + }; + usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; @@ -176,6 +189,25 @@ imu@68 { }; }; +&blsp_i2c5 { + status = "okay"; + + touchscreen@48 { + compatible = "himax,hx8527e", "himax,hx852es"; + reg = <0x48>; + + interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; + vcca-supply = <®_ts_vcca>; + vccd-supply = <&pm8916_l6>; + + pinctrl-0 = <&ts_int_reset_default>; + pinctrl-names = "default"; + + linux,keycodes = ; + }; +}; + &blsp_uart2 { status = "okay"; pinctrl-0 = <&blsp_uart2_console_default>; @@ -338,6 +370,20 @@ spk_ext_pa_default: spk-ext-pa-default-state { bias-disable; }; + ts_int_reset_default: ts-int-reset-default-state { + pins = "gpio12", "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + ts_vcca_default: ts-vcca-default-state { + pins = "gpio78"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + usb_id_default: usb-id-default-state { pins = "gpio110"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi index e7f265e3c2ab87..e33453c3e51e84 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa-common.dtsi @@ -5,7 +5,7 @@ /* SM5504 MUIC instead of SM5502 */ /delete-node/ &muic; -/* Touchscreen varies depending on model variant */ +/* IST3038 instead of Zinitix BT541 */ /delete-node/ &touchscreen; &blsp_i2c1 { @@ -24,6 +24,26 @@ usb_con: connector { }; }; +&blsp_i2c5 { + touchscreen: touchscreen@50 { + compatible = "imagis,ist3038"; + reg = <0x50>; + + interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>; + + touchscreen-size-x = <480>; + touchscreen-size-y = <800>; + + vdd-supply = <®_vdd_tsp_a>; + vddio-supply = <&pm8916_l6>; + + pinctrl-0 = <&tsp_int_default>; + pinctrl-names = "default"; + + linux,keycodes = ; + }; +}; + /* On rossa backlight is controlled with MIPI DCS commands */ &clk_pwm { status = "disabled"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts index 3413b0970c4abc..1981bb71f6a928 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-rossa.dts @@ -16,26 +16,6 @@ &battery { constant-charge-voltage-max-microvolt = <4400000>; }; -&blsp_i2c5 { - touchscreen@50 { - compatible = "imagis,ist3038"; - reg = <0x50>; - - interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>; - - touchscreen-size-x = <480>; - touchscreen-size-y = <800>; - - vdd-supply = <®_vdd_tsp_a>; - vddio-supply = <&pm8916_l6>; - - pinctrl-0 = <&tsp_int_default>; - pinctrl-names = "default"; - - linux,keycodes = ; - }; -}; - &mpss_mem { /* Firmware for rossa needs more space */ reg = <0x0 0x86800000 0x0 0x5800000>; diff --git a/arch/arm64/boot/dts/qcom/msm8937-xiaomi-land.dts b/arch/arm64/boot/dts/qcom/msm8937-xiaomi-land.dts new file mode 100644 index 00000000000000..91837ff940f1b6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8937-xiaomi-land.dts @@ -0,0 +1,381 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024, Barnabas Czeman + */ +/dts-v1/; + +#include +#include +#include + +#include "msm8937.dtsi" +#include "pm8937.dtsi" +#include "pmi8950.dtsi" + +/delete-node/ &qseecom_mem; + +/ { + model = "Xiaomi Redmi 3S (land)"; + compatible = "xiaomi,land", "qcom,msm8937"; + chassis-type = "handset"; + + qcom,msm-id = ; + qcom,board-id = <0x1000b 1>, <0x2000b 1>; + + aliases { + mmc0 = &sdhc_1; + mmc1 = &sdhc_2; + }; + + battery: battery { + compatible = "simple-battery"; + + charge-full-design-microamp-hours = <4100000>; + constant-charge-current-max-microamp = <1000000>; + voltage-min-design-microvolt = <3400000>; + voltage-max-design-microvolt = <4400000>; + }; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "framebuffer0"; + + framebuffer0: framebuffer@8dd01000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x8dd01000 0x0 (720 * 1280 * 3)>; + width = <720>; + height = <1280>; + stride = <(720 * 3)>; + format = "r8g8b8"; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + power-domains = <&gcc MDSS_GDSC>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + key-volup { + label = "Volume Up"; + linux,code = ; + gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + }; + }; + + irled { + compatible = "gpio-ir-tx"; + gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; + }; + + reserved-memory { + reserved@84a00000 { + reg = <0x0 0x84a00000 0x0 0x1900000>; + no-map; + }; + + framebuffer: memory@8dd01000 { + reg = <0x0 0x8dd01000 0x0 (720 * 1280 * 3)>; + no-map; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + led-controller@45 { + compatible = "awinic,aw2013"; + reg = <0x45>; + #address-cells = <1>; + #size-cells = <0>; + + vcc-supply = <&pm8937_l10>; + vio-supply = <&pm8937_l5>; + + led@0 { + reg = <0>; + function = LED_FUNCTION_STATUS; + led-max-microamp = <5000>; + color = ; + }; + + led@1 { + reg = <1>; + function = LED_FUNCTION_STATUS; + led-max-microamp = <5000>; + color = ; + }; + + led@2 { + reg = <2>; + function = LED_FUNCTION_STATUS; + led-max-microamp = <5000>; + color = ; + }; + }; +}; + +&blsp1_i2c3 { + status = "okay"; + + touchscreen@3e { + compatible = "edt,edt-ft5306"; + reg = <0x3e>; + + interrupts-extended = <&tlmm 65 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + vcc-supply = <&pm8937_l10>; + iovcc-supply = <&pm8937_l5>; + + pinctrl-0 = <&tsp_int_rst_default>; + pinctrl-names = "default"; + + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + }; +}; + +&pm8937_resin { + linux,code = ; + + status = "okay"; +}; + +&pm8937_spmi_regulators { + /* APC */ + pm8937_s5: s5 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&pmi8950_wled { + qcom,num-strings = <2>; + qcom,external-pfet; + qcom,current-limit-microamp = <20000>; + qcom,ovp-millivolt = <29600>; + + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm8937-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + + vdd_l1_l19-supply = <&pm8937_s3>; + vdd_l2_l23-supply = <&pm8937_s3>; + vdd_l3-supply = <&pm8937_s3>; + vdd_l4_l5_l6_l7_l16-supply = <&pm8937_s4>; + vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>; + vdd_l9_l10_l13_l14_l15_l18-supply = <&vph_pwr>; + + pm8937_s1: s1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1225000>; + }; + + pm8937_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8937_s4: s4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8937_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8937_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8937_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8937_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8937_l8: l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + pm8937_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8937_l10: l10 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8937_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + pm8937_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8937_l13: l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8937_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8937_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8937_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8937_l17: l17 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2900000>; + }; + + pm8937_l19: l19 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1350000>; + }; + + pm8937_l22: l22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8937_l23: l23 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; +}; + +&sdc2_cmd_default { + drive-strength = <12>; +}; + +&sdc2_data_default { + drive-strength = <12>; +}; + +&sdhc_1 { + vmmc-supply = <&pm8937_l8>; + vqmmc-supply = <&pm8937_l5>; + + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 67 GPIO_ACTIVE_LOW>; + vmmc-supply = <&pm8937_l11>; + vqmmc-supply = <&pm8937_l12>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32768>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <20 4>; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio91"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio67"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_int_rst_default: tsp-int-rst-default-state { + pins = "gpio64", "gpio65"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; + +&wcnss { + vddpx-supply = <&pm8937_l5>; + + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; + vddxo-supply = <&pm8937_l7>; + vddrfa-supply = <&pm8937_l19>; + vddpa-supply = <&pm8937_l9>; + vdddig-supply = <&pm8937_l5>; +}; + +&wcnss_mem { + status = "okay"; +}; + +&xo_board { + clock-frequency = <19200000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8937.dtsi b/arch/arm64/boot/dts/qcom/msm8937.dtsi new file mode 100644 index 00000000000000..b936210809894d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8937.dtsi @@ -0,0 +1,2133 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Dang Huynh + */ + +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53"; + reg = <0x0>; + device_type = "cpu"; + enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table_c0>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + + l2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x80000>; + cache-unified; + }; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53"; + reg = <0x1>; + device_type = "cpu"; + enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table_c0>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53"; + reg = <0x2>; + device_type = "cpu"; + enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table_c0>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53"; + reg = <0x3>; + device_type = "cpu"; + enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table_c0>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu4: cpu@100 { + compatible = "arm,cortex-a53"; + reg = <0x100>; + device_type = "cpu"; + next-level-cache = <&l2_1>; + enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table_c1>; + #cooling-cells = <2>; + + l2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x100000>; + cache-unified; + }; + }; + + cpu5: cpu@101 { + compatible = "arm,cortex-a53"; + reg = <0x101>; + device_type = "cpu"; + next-level-cache = <&l2_1>; + enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table_c1>; + #cooling-cells = <2>; + }; + + cpu6: cpu@102 { + compatible = "arm,cortex-a53"; + reg = <0x102>; + device_type = "cpu"; + next-level-cache = <&l2_1>; + enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table_c1>; + #cooling-cells = <2>; + }; + + cpu7: cpu@103 { + compatible = "arm,cortex-a53"; + reg = <0x103>; + device_type = "cpu"; + next-level-cache = <&l2_1>; + enable-method = "psci"; + operating-points-v2 = <&cpu_opp_table_c1>; + #cooling-cells = <2>; + }; + + cpu-map { + /* Little Cores */ + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + }; + + /* Big Cores */ + cluster1 { + core0 { + cpu = <&cpu4>; + }; + + core1 { + cpu = <&cpu5>; + }; + + core2 { + cpu = <&cpu6>; + }; + + core3 { + cpu = <&cpu7>; + }; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-msm8937", "qcom,scm"; + clocks = <&gcc GCC_CRYPTO_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "core", + "bus", + "iface"; + #reset-cells = <1>; + + qcom,dload-mode = <&tcsr 0x6100>; + }; + }; + + memory@80000000 { + /* We expect the bootloader to fill in the reg */ + reg = <0 0x80000000 0 0>; + device_type = "memory"; + }; + + reserved-memory { + ranges; + #address-cells = <2>; + #size-cells = <2>; + + qseecom_mem: reserved@85b00000 { + reg = <0x0 0x85b00000 0x0 0x800000>; + no-map; + }; + + smem@86300000 { + compatible = "qcom,smem"; + reg = <0x0 0x86300000 0x0 0x100000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + }; + + reserved@86400000 { + reg = <0x0 0x86400000 0x0 0x400000>; + no-map; + }; + + rmtfs@92100000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x92100000 0x0 0x180000>; + no-map; + + qcom,client-id = <1>; + }; + + adsp_mem: adsp { + size = <0x0 0x1100000>; + alignment = <0x0 0x100000>; + alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; + no-map; + status = "disabled"; + }; + + mba_mem: mba { + size = <0x0 0x100000>; + alignment = <0x0 0x100000>; + alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; + no-map; + status = "disabled"; + }; + + wcnss_mem: wcnss { + size = <0x0 0x700000>; + alignment = <0x0 0x100000>; + alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; + no-map; + status = "disabled"; + }; + + venus_mem: venus { + size = <0x0 0x400000>; + alignment = <0x0 0x100000>; + alloc-ranges = <0x0 0x86800000 0x0 0x8000000>; + no-map; + status = "disabled"; + }; + }; + + cpu_opp_table_c0: opp-table-c0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-768000000 { + opp-hz = /bits/ 64 <768000000>; + }; + + opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + }; + + opp-998400000 { + opp-hz = /bits/ 64 <998400000>; + }; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + }; + }; + + cpu_opp_table_c1: opp-table-c1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-960000000 { + opp-hz = /bits/ 64 <960000000>; + }; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + }; + + opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + }; + + opp-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + }; + + opp-1344000000 { + opp-hz = /bits/ 64 <1344000000>; + }; + + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + }; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + rpm: remoteproc { + compatible = "qcom,msm8937-rpm-proc", "qcom,rpm-proc"; + + smd-edge { + interrupts = ; + qcom,ipc = <&apcs1 8 0>; + qcom,smd-edge = <15>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8937", "qcom,smd-rpm"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8937", "qcom,rpmcc"; + #clock-cells = <1>; + clocks = <&xo_board>; + clock-names = "xo"; + }; + + rpmpd: power-controller { + compatible = "qcom,msm8937-rpmpd", "qcom,msm8917-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = ; + }; + + rpmpd_opp_ret_plus: opp2 { + opp-level = ; + }; + + rpmpd_opp_min_svs: opp3 { + opp-level = ; + }; + + rpmpd_opp_low_svs: opp4 { + opp-level = ; + }; + + rpmpd_opp_svs: opp5 { + opp-level = ; + }; + + rpmpd_opp_svs_plus: opp6 { + opp-level = ; + }; + + rpmpd_opp_nom: opp7 { + opp-level = ; + }; + + rpmpd_opp_nom_plus: opp8 { + opp-level = ; + }; + + rpmpd_opp_turbo: opp9 { + opp-level = ; + }; + }; + }; + }; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = ; + + mboxes = <&apcs1 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = ; + + mboxes = <&apcs1 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-wcnss { + compatible = "qcom,smp2p"; + qcom,smem = <451>, <431>; + + interrupts = ; + + mboxes = <&apcs1 18>; + + qcom,local-pid = <0>; + qcom,remote-pid = <4>; + + wcnss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + wcnss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smsm { + compatible = "qcom,smsm"; + + #address-cells = <1>; + #size-cells = <0>; + + mboxes = <0>, <&apcs1 13>, <0>, <&apcs1 19>; + + apps_smsm: apps@0 { + reg = <0>; + + #qcom,smem-state-cells = <1>; + }; + + hexagon_smsm: hexagon@1 { + reg = <1>; + interrupts = ; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smsm: wcnss@6 { + reg = <6>; + interrupts = ; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + ranges = <0 0 0 0xffffffff>; + #address-cells = <1>; + #size-cells = <1>; + + qfprom: qfprom@a4000 { + compatible = "qcom,msm8937-qfprom", "qcom,qfprom"; + reg = <0x000a4000 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + + tsens_base1: base1@1d8 { + reg = <0x1d8 0x1>; + bits = <0 8>; + }; + + tsens_s5_p1: s5-p1@1d9 { + reg = <0x1d9 0x1>; + bits = <0 6>; + }; + + tsens_s5_p2: s5-p2@1d9 { + reg = <0x1d9 0x2>; + bits = <6 6>; + }; + + tsens_s6_p1: s6-p1@1da { + reg = <0x1da 0x2>; + bits = <4 6>; + }; + + tsens_s6_p2: s6-p2@1db { + reg = <0x1db 0x1>; + bits = <2 6>; + }; + + tsens_s7_p1: s7-p1@1dc { + reg = <0x1dc 0x1>; + bits = <0 6>; + }; + + tsens_s7_p2: s7-p2@1dc { + reg = <0x1dc 0x2>; + bits = <6 6>; + }; + + tsens_s8_p1: s8-p1@1dd { + reg = <0x1dd 0x2>; + bits = <4 6>; + }; + + tsens_s8_p2: s8-p2@1de { + reg = <0x1de 0x1>; + bits = <2 6>; + }; + + tsens_base2: base2@1df { + reg = <0x1df 0x1>; + bits = <0 8>; + }; + + tsens_mode: mode@210 { + reg = <0x210 0x1>; + bits = <0 3>; + }; + + tsens_s0_p1: s0-p1@210 { + reg = <0x210 0x2>; + bits = <3 6>; + }; + + tsens_s0_p2: s0-p2@211 { + reg = <0x211 0x1>; + bits = <1 6>; + }; + + tsens_s1_p1: s1-p1@211 { + reg = <0x211 0x2>; + bits = <7 6>; + }; + + tsens_s1_p2: s1-p2@212 { + reg = <0x212 0x2>; + bits = <5 6>; + }; + + tsens_s2_p1: s2-p1@213 { + reg = <0x213 0x2>; + bits = <3 6>; + }; + + tsens_s2_p2: s2-p2@214 { + reg = <0x214 0x1>; + bits = <1 6>; + }; + + tsens_s3_p1: s3-p1@214 { + reg = <0x214 0x2>; + bits = <7 6>; + }; + + tsens_s3_p2: s3-p2@215 { + reg = <0x215 0x2>; + bits = <5 6>; + }; + + tsens_s4_p1: s4-p1@216 { + reg = <0x216 0x2>; + bits = <3 6>; + }; + + tsens_s4_p2: s4-p2@217 { + reg = <0x217 0x1>; + bits = <1 6>; + }; + + tsens_s9_p1: s9-p1@230 { + reg = <0x230 0x1>; + bits = <0 6>; + }; + + tsens_s9_p2: s9-p2@230 { + reg = <0x230 0x2>; + bits = <6 6>; + }; + + tsens_s10_p1: s10-p1@231 { + reg = <0x231 0x2>; + bits = <4 6>; + }; + + tsens_s10_p2: s10-p2@232 { + reg = <0x232 0x1>; + bits = <2 6>; + }; + + gpu_speed_bin: gpu-speed-bin@201b { + reg = <0x201b 0x1>; + bits = <7 1>; + }; + }; + + rpm_msg_ram: sram@60000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x00060000 0x8000>; + }; + + usb_hs_phy: phy@6c000 { + compatible = "qcom,usb-hs-28nm-femtophy"; + reg = <0x0006c000 0x200>; + #phy-cells = <0>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, + <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", + "ahb", + "sleep"; + resets = <&gcc GCC_QUSB2_PHY_BCR>, + <&gcc GCC_USB2_HS_PHY_ONLY_BCR>; + reset-names = "phy", + "por"; + status = "disabled"; + }; + + rng@e3000 { + compatible = "qcom,prng"; + reg = <0x000e3000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + tsens: thermal-sensor@4a9000 { + compatible = "qcom,msm8937-tsens", "qcom,tsens-v1"; + reg = <0x004a9000 0x1000>, + <0x004a8000 0x1000>; + interrupts = ; + interrupt-names = "uplow"; + nvmem-cells = <&tsens_mode>, + <&tsens_base1>, <&tsens_base2>, + <&tsens_s0_p1>, <&tsens_s0_p2>, + <&tsens_s1_p1>, <&tsens_s1_p2>, + <&tsens_s2_p1>, <&tsens_s2_p2>, + <&tsens_s3_p1>, <&tsens_s3_p2>, + <&tsens_s4_p1>, <&tsens_s4_p2>, + <&tsens_s5_p1>, <&tsens_s5_p2>, + <&tsens_s6_p1>, <&tsens_s6_p2>, + <&tsens_s7_p1>, <&tsens_s7_p2>, + <&tsens_s8_p1>, <&tsens_s8_p2>, + <&tsens_s9_p1>, <&tsens_s9_p2>, + <&tsens_s10_p1>, <&tsens_s10_p2>; + nvmem-cell-names = "mode", + "base1", "base2", + "s0_p1", "s0_p2", + "s1_p1", "s1_p2", + "s2_p1", "s2_p2", + "s3_p1", "s3_p2", + "s4_p1", "s4_p2", + "s5_p1", "s5_p2", + "s6_p1", "s6_p2", + "s7_p1", "s7_p2", + "s8_p1", "s8_p2", + "s9_p1", "s9_p2", + "s10_p1", "s10_p2"; + #qcom,sensors = <11>; + #thermal-sensor-cells = <1>; + }; + + restart@4ab000 { + compatible = "qcom,pshold"; + reg = <0x004ab000 0x4>; + }; + + tlmm: pinctrl@1000000 { + compatible = "qcom,msm8917-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = ; + gpio-controller; + gpio-ranges = <&tlmm 0 0 134>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1_i2c2_default: blsp1-i2c2-default-state { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c2_sleep: blsp1-i2c2-sleep-state { + pins = "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c3_default: blsp1-i2c3-default-state { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c3_sleep: blsp1-i2c3-sleep-state { + pins = "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c4_default: blsp1-i2c4-default-state { + pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_i2c4_sleep: blsp1-i2c4-sleep-state { + pins = "gpio14", "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c1_default: blsp2-i2c1-default-state { + pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c1_sleep: blsp2-i2c1-sleep-state { + pins = "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_spi3_default: blsp1-spi3-default-state { + cs-pins { + pins = "gpio10"; + function = "blsp_spi3"; + drive-strength = <2>; + bias-disable; + }; + + spi-pins { + pins = "gpio8", "gpio9", "gpio11"; + function = "blsp_spi3"; + drive-strength = <12>; + bias-disable; + }; + }; + + blsp1_spi3_sleep: blsp1-spi3-sleep-state { + cs-pins { + pins = "gpio10"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + spi-pins { + pins = "gpio8", "gpio9", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + blsp2_spi2_default: blsp2-spi2-default-state { + cs0-pins { + pins = "gpio47"; + function = "blsp_spi6"; + drive-strength = <16>; + bias-disable; + }; + + cs1-pins { + pins = "gpio22"; + function = "blsp_spi6"; + drive-strength = <16>; + bias-disable; + }; + + spi-pins { + pins = "gpio20", "gpio21", "gpio23"; + function = "blsp_spi6"; + drive-strength = <16>; + bias-disable; + }; + }; + + blsp2_spi2_sleep: blsp2-spi2-sleep-state { + cs0-pins { + pins = "gpio47"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + cs1-pins { + pins = "gpio22"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + spi-pins { + pins = "gpio20", "gpio21", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + blsp1_uart1_default: blsp1-uart1-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "blsp_uart1"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_uart1_sleep: blsp1-uart1-sleep-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_uart2_default: blsp1-uart2-default-state { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_uart2_sleep: blsp1-uart2-sleep-state { + pins = "gpio4", "gpio5"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + sdc1_default: sdc1-default-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_sleep: sdc1-sleep-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc1_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc1_data"; + drive-strength = <2>; + bias-pull-up; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc2_default: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + sdc2_cmd_default: cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <16>; + bias-pull-up; + }; + + sdc2_data_default: data-pins { + pins = "sdc2_data"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + sdc2_sleep: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + wcnss_pin_a: wcnss-active-state { + wcss-wlan-pins { + pins = "gpio79", "gpio80"; + function = "wcss_wlan"; + drive-strength = <6>; + bias-pull-up; + + }; + + wcss-wlan0-pins { + pins = "gpio78"; + function = "wcss_wlan0"; + drive-strength = <6>; + bias-pull-up; + + }; + + wcss-wlan1-pins { + pins = "gpio77"; + function = "wcss_wlan1"; + drive-strength = <6>; + bias-pull-up; + + }; + + wcss-wlan2-pins { + pins = "gpio76"; + function = "wcss_wlan2"; + drive-strength = <6>; + bias-pull-up; + + }; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-msm8937"; + reg = <0x01800000 0x80000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&sleep_clk>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, + <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>, + <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>; + clock-names = "xo", + "sleep", + "dsi0pll", + "dsi0pllbyte", + "dsi1pll", + "dsi1pllbyte"; + }; + + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-msm8937", "syscon"; + reg = <0x01937000 0x30000>; + }; + + mdss: display-subsystem@1a00000 { + compatible = "qcom,mdss"; + reg = <0x01a00000 0x1000>, + <0x01ab0000 0x3000>; + reg-names = "mdss_phys", + "vbif_phys"; + ranges; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "vsync"; + interrupts = ; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + + status = "disabled"; + + mdp: display-controller@1a01000 { + compatible = "qcom,msm8937-mdp5", "qcom,mdp5"; + reg = <0x01a01000 0x89000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + iommus = <&apps_iommu 0x15>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + mdp5_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + }; + }; + + mdss_dsi0: dsi@1a94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x01a94000 0x300>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + assigned-clocks = <&gcc BYTE0_CLK_SRC>, + <&gcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + phys = <&mdss_dsi0_phy>; + + operating-points-v2 = <&mdss_dsi0_opp_table>; + power-domains = <&rpmpd MSM8937_VDDCX>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&mdp5_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + + mdss_dsi0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-125000000 { + opp-hz = /bits/ 64 <125000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + }; + + mdss_dsi0_phy: phy@1a94400 { + compatible = "qcom,dsi-phy-28nm-8937"; + reg = <0x01a94a00 0xd4>, + <0x01a94400 0x280>, + <0x01a94b80 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "ref"; + + status = "disabled"; + }; + + mdss_dsi1: dsi@1a96000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x01a96000 0x300>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + assigned-clocks = <&gcc MSM8937_BYTE1_CLK_SRC>, + <&gcc MSM8937_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc MSM8937_GCC_MDSS_BYTE1_CLK>, + <&gcc MSM8937_GCC_MDSS_PCLK1_CLK>, + <&gcc MSM8937_GCC_MDSS_ESC1_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + phys = <&mdss_dsi1_phy>; + + operating-points-v2 = <&mdss_dsi1_opp_table>; + power-domains = <&rpmpd MSM8937_VDDCX>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi1_in: endpoint { + remote-endpoint = <&mdp5_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi1_out: endpoint { + }; + }; + }; + + mdss_dsi1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-125000000 { + opp-hz = /bits/ 64 <125000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + }; + + mdss_dsi1_phy: phy@1a96a00 { + compatible = "qcom,dsi-phy-28nm-8937"; + reg = <0x01a96a00 0xd4>, + <0x01a96400 0x280>, + <0x01a94b80 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "ref"; + + status = "disabled"; + }; + }; + + gpu: gpu@1c00000 { + compatible = "qcom,adreno-505.0", "qcom,adreno"; + reg = <0x01c00000 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = ; + interrupt-names = "kgsl_3d0_irq"; + #cooling-cells = <2>; + clocks = <&gcc GCC_OXILI_GFX3D_CLK>, + <&gcc GCC_OXILI_AHB_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_BIMC_GPU_CLK>, + <&gcc MSM8937_GCC_OXILI_TIMER_CLK>, + <&gcc MSM8937_GCC_OXILI_AON_CLK>; + clock-names = "core", + "iface", + "mem_iface", + "alt_mem_iface", + "rbbmtimer", + "alwayson"; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&gcc OXILI_GX_GDSC>; + + iommus = <&adreno_smmu 0>; + + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_min_svs>; + }; + + opp-216000000 { + opp-hz = /bits/ 64 <216000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_nom>; + }; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_nom_plus>; + }; + + opp-450000000 { + opp-hz = /bits/ 64 <450000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_turbo>; + }; + }; + }; + + adreno_smmu: iommu@1c40000 { + compatible = "qcom,msm8996-smmu-v2", + "qcom,adreno-smmu", + "qcom,smmu-v2"; + reg = <0x01c40000 0x10000>; + + #global-interrupts = <1>; + interrupts = , + , + , + , + ; + #iommu-cells = <1>; + + clocks = <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_OXILI_AHB_CLK>; + clock-names = "bus", + "iface"; + + power-domains = <&gcc MSM8937_OXILI_CX_GDSC>; + }; + + apps_iommu: iommu@1e20000 { + compatible = "qcom,msm8937-iommu", "qcom,msm-iommu-v1"; + ranges = <0 0x01e20000 0x20000>; + + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_APSS_TCU_CLK>; + clock-names = "iface", + "bus"; + + qcom,iommu-secure-id = <17>; + + #address-cells = <1>; + #iommu-cells = <1>; + #size-cells = <1>; + + /* VFE */ + iommu-ctx@14000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x14000 0x1000>; + interrupts = ; + }; + + /* MDP_0 */ + iommu-ctx@15000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x15000 0x1000>; + interrupts = ; + }; + + /* VENUS_NS */ + iommu-ctx@16000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x16000 0x1000>; + interrupts = ; + }; + }; + + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0200f000 0x001000>, + <0x02400000 0x800000>, + <0x02c00000 0x800000>, + <0x03800000 0x200000>, + <0x0200a000 0x002100>; + reg-names = "core", + "chnls", + "obsrvr", + "intr", + "cnfg"; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + bam_dmux_dma: dma-controller@4044000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x04044000 0x19000>; + interrupts = ; + #dma-cells = <1>; + qcom,ee = <0>; + + num-channels = <6>; + qcom,num-ees = <1>; + qcom,powered-remotely; + + status = "disabled"; + }; + + sdhc_1: mmc@7824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x07824900 0x500>, + <0x07824000 0x800>; + reg-names = "hc", + "core"; + + interrupts = , + ; + interrupt-names = "hc_irq", + "pwr_irq"; + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "core", + "xo"; + pinctrl-0 = <&sdc1_default>; + pinctrl-1 = <&sdc1_sleep>; + pinctrl-names = "default", + "sleep"; + power-domains = <&rpmpd MSM8937_VDDCX>; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-ddr-1_8v; + bus-width = <8>; + non-removable; + status = "disabled"; + }; + + sdhc_2: mmc@7864900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x07864900 0x500>, + <0x07864000 0x800>; + reg-names = "hc", + "core"; + + interrupts = , + ; + interrupt-names = "hc_irq", + "pwr_irq"; + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "core", + "xo"; + pinctrl-0 = <&sdc2_default>; + pinctrl-1 = <&sdc2_sleep>; + pinctrl-names = "default", + "sleep"; + power-domains = <&rpmpd MSM8937_VDDCX>; + bus-width = <4>; + status = "disabled"; + }; + + blsp1_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x1f000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + qcom,controlled-remotely; + #dma-cells = <1>; + num-channels = <12>; + qcom,num-ees = <4>; + qcom,ee = <0>; + }; + + blsp1_uart2: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b0000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", + "iface"; + dmas = <&blsp1_dma 2>, + <&blsp1_dma 3>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + pinctrl-names = "default", + "sleep"; + status = "disabled"; + }; + + blsp1_i2c2: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b6000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 6>, + <&blsp1_dma 7>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&blsp1_i2c2_default>; + pinctrl-1 = <&blsp1_i2c2_sleep>; + pinctrl-names = "default", + "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c3: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", + "iface"; + dmas = <&blsp1_dma 8>, + <&blsp1_dma 9>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&blsp1_i2c3_default>; + pinctrl-1 = <&blsp1_i2c3_sleep>; + pinctrl-names = "default", + "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_spi3: spi@78b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", + "iface"; + dmas = <&blsp1_dma 8>, + <&blsp1_dma 9>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&blsp1_spi3_default>; + pinctrl-1 = <&blsp1_spi3_sleep>; + pinctrl-names = "default", + "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp1_i2c4: i2c@78b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b8000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", + "iface"; + dmas = <&blsp1_dma 10>, + <&blsp1_dma 11>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&blsp1_i2c4_default>; + pinctrl-1 = <&blsp1_i2c4_sleep>; + pinctrl-names = "default", + "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_dma: dma-controller@7ac4000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07ac4000 0x1d000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + qcom,controlled-remotely; + #dma-cells = <1>; + num-channels = <10>; + qcom,num-ees = <4>; + qcom,ee = <0>; + }; + + blsp2_i2c1: i2c@7af5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x07af5000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", + "iface"; + dmas = <&blsp2_dma 4>, + <&blsp2_dma 5>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&blsp2_i2c1_default>; + pinctrl-1 = <&blsp2_i2c1_sleep>; + pinctrl-names = "default", + "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_spi2: spi@7af6000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x07af6000 0x600>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", + "iface"; + dmas = <&blsp2_dma 6>, + <&blsp2_dma 7>; + dma-names = "tx", + "rx"; + pinctrl-0 = <&blsp2_spi2_default>; + pinctrl-1 = <&blsp2_spi2_sleep>; + pinctrl-names = "default", + "sleep"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usb: usb@78db000 { + compatible = "qcom,ci-hdrc"; + reg = <0x078db000 0x200>, + <0x078db200 0x200>; + interrupts = , + ; + clocks = <&gcc GCC_USB_HS_AHB_CLK>, + <&gcc GCC_USB_HS_SYSTEM_CLK>; + clock-names = "iface", + "core"; + assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; + assigned-clock-rates = <80000000>; + resets = <&gcc GCC_USB_HS_BCR>; + reset-names = "core"; + phy_type = "ulpi"; + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + ahb-burst-config = <0>; + phy-names = "usb-phy"; + phys = <&usb_hs_phy>; + status = "disabled"; + #reset-cells = <1>; + }; + + wcnss: remoteproc@a204000 { + compatible = "qcom,pronto-v3-pil", "qcom,pronto"; + reg = <0x0a204000 0x2000>, + <0x0a202000 0x1000>, + <0x0a21b000 0x3000>; + reg-names = "ccu", + "dxe", + "pmu"; + + memory-region = <&wcnss_mem>; + + interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + power-domains = <&rpmpd MSM8937_VDDCX>, + <&rpmpd MSM8937_VDDMX>; + power-domain-names = "cx", + "mx"; + + qcom,smem-states = <&wcnss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + pinctrl-0 = <&wcnss_pin_a>; + pinctrl-names = "default"; + + status = "disabled"; + + wcnss_iris: iris { + clocks = <&rpmcc RPM_SMD_RF_CLK2>; + clock-names = "xo"; + }; + + smd-edge { + interrupts = ; + + mboxes = <&apcs1 17>; + qcom,smd-edge = <6>; + qcom,remote-pid = <4>; + + label = "pronto"; + + wcnss_ctrl: wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&wcnss>; + + wcnss_bt: bluetooth { + compatible = "qcom,wcnss-bt"; + }; + + wcnss_wifi: wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = , + ; + interrupt-names = "tx", + "rx"; + + qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", + "tx-rings-empty"; + }; + }; + }; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0b000000 0x1000>, + <0x0b002000 0x1000>; + }; + + apcs1: mailbox@b011000 { + compatible = "qcom,msm8939-apcs-kpss-global", "syscon"; + reg = <0x0b011000 0x1000>; + #mbox-cells = <1>; + }; + + watchdog@b017000 { + compatible = "qcom,apss-wdt-qcs404", "qcom,kpss-wdt"; + reg = <0x0b017000 0x1000>; + clocks = <&sleep_clk>; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + frame@b121000 { + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; + frame-number = <0>; + interrupts = , + ; + }; + + frame@b123000 { + reg = <0x0b123000 0x1000>; + frame-number = <1>; + interrupts = ; + status = "disabled"; + }; + + frame@b124000 { + reg = <0x0b124000 0x1000>; + frame-number = <2>; + interrupts = ; + status = "disabled"; + }; + + frame@b125000 { + reg = <0x0b125000 0x1000>; + frame-number = <3>; + interrupts = ; + status = "disabled"; + }; + + frame@b126000 { + reg = <0x0b126000 0x1000>; + frame-number = <4>; + interrupts = ; + status = "disabled"; + }; + + frame@b127000 { + reg = <0x0b127000 0x1000>; + frame-number = <5>; + interrupts = ; + status = "disabled"; + }; + + frame@b128000 { + reg = <0x0b128000 0x1000>; + frame-number = <6>; + interrupts = ; + status = "disabled"; + }; + }; + }; + + thermal_zones: thermal-zones { + aoss-thermal { + thermal-sensors = <&tsens 0>; + + trips { + aoss_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + mdm-core-thermal { + thermal-sensors = <&tsens 1>; + + trips { + mdm_core_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + q6-thermal { + thermal-sensors = <&tsens 2>; + + trips { + q6_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + camera-thermal { + thermal-sensors = <&tsens 3>; + + trips { + camera_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpuss1-thermal { + thermal-sensors = <&tsens 4>; + + cooling-maps { + map0 { + trip = <&cpuss1_alert0>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpuss1_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss1_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss1_crit: cpuss1-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu4-thermal { + thermal-sensors = <&tsens 5>; + + cooling-maps { + map0 { + trip = <&cpu4_alert1>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu4_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu4_crit: cpu-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu5-thermal { + thermal-sensors = <&tsens 6>; + + cooling-maps { + map0 { + trip = <&cpu5_alert1>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu5_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu5_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_crit: cpu-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu6-thermal { + thermal-sensors = <&tsens 7>; + + cooling-maps { + map0 { + trip = <&cpu6_alert1>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu6_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu6_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_crit: cpu-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu7-thermal { + thermal-sensors = <&tsens 8>; + + cooling-maps { + map0 { + trip = <&cpu7_alert1>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu7_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu7_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_crit: cpu-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpuss0-thermal { + thermal-sensors = <&tsens 9>; + + cooling-maps { + map0 { + trip = <&cpuss0_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpuss0_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpuss0_alert1: trip-point1 { + temperature = <85000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss0_crit: cpuss0-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <250>; + + thermal-sensors = <&tsens 10>; + + cooling-maps { + map0 { + trip = <&gpu_alert>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + gpu_alert: trip-point0 { + temperature = <70000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_crit: gpu-crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; +}; + diff --git a/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts b/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts new file mode 100644 index 00000000000000..ebb548e62e02b9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8939-asus-z00t.dts @@ -0,0 +1,256 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8939-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + +#include +#include +#include + +/ { + model = "Asus ZenFone 2 Laser/Selfie (1080p)"; + compatible = "asus,z00t", "qcom,msm8939"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; + mmc1 = &sdhc_2; + serial0 = &blsp_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + button-volume-up { + label = "Volume Up"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + }; + + button-volume-down { + label = "Volume Down"; + gpios = <&tlmm 117 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + }; + }; + + reg_sd_vmmc: regulator-sdcard-vmmc { + compatible = "regulator-fixed"; + regulator-name = "sdcard-vmmc"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>; + enable-active-high; + + startup-delay-us = <200>; + + pinctrl-0 = <&sd_vmmc_en_default>; + pinctrl-names = "default"; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb_id_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + magnetometer@c { + compatible = "asahi-kasei,ak09911"; + reg = <0x0c>; + + vdd-supply = <&pm8916_l8>; + vid-supply = <&pm8916_l6>; + + reset-gpios = <&tlmm 112 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&mag_reset_default>; + pinctrl-names = "default"; + }; + + imu@68 { + compatible = "invensense,mpu6515"; + reg = <0x68>; + + interrupts-extended = <&tlmm 36 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8916_l8>; + vddio-supply = <&pm8916_l6>; + + pinctrl-0 = <&imu_default>; + pinctrl-names = "default"; + + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5306"; + reg = <0x38>; + + interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; + + vcc-supply = <&pm8916_l8>; + iovcc-supply = <&pm8916_l6>; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <1920>; + + pinctrl-0 = <&touchscreen_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_uart2 { + pinctrl-0 = <&blsp_uart2_console_default>; + pinctrl-1 = <&blsp_uart2_console_sleep>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5500000>; +}; + +&pm8916_codec { + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + qcom,micbias1-ext-cap; + qcom,hphl-jack-type-normally-open; + + status = "okay"; +}; + +&pm8916_vib { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <®_sd_vmmc>; + + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&sound { + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + status = "okay"; +}; + +&usb { + extcon = <&usb_id>, <&usb_id>; + + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3660b"; +}; + +&wcnss_mem { + status = "okay"; +}; + +&tlmm { + touchscreen_default: touchscreen-default-state { + reset-pins { + pins = "gpio12"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + touch-pins { + pins = "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + imu_default: imu-default-state { + pins = "gpio36"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sd_vmmc_en_default: sd-vmmc-en-default-state { + pins = "gpio87"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107", "gpio117"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + usb_id_default: usb-id-default-state { + pins = "gpio110"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + mag_reset_default: mag-reset-default-state { + pins = "gpio112"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts index 220eeb31fdc70b..0bb9e3d8f7144a 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts @@ -27,10 +27,10 @@ &battery { &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/msm8996/oneplus3/a530_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/msm8996/oneplus3/a530_zap.mbn"; }; &mss_pil { diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts index f772618e80c702..1d7b27c5aff60c 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts @@ -28,10 +28,10 @@ &battery { &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/msm8996/oneplus3t/a530_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/msm8996/oneplus3t/a530_zap.mbn"; }; &mss_pil { diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts index bd3f39e1b98fb6..3c6a40212a8dce 100644 --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts @@ -91,10 +91,8 @@ synaptics@20 { }; -&gpu { - zap-shader { - firmware-name = "qcom/msm8996/gemini/a530_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/msm8996/gemini/a530_zap.mbn"; }; &mdss_dsi0 { diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index c75b522f6eba66..9d4ce47578fb42 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -1333,7 +1333,7 @@ opp-133000000 { }; }; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&gpu_mem>; }; }; @@ -3496,6 +3496,9 @@ usb2: usb@76f8800 { <&gcc GCC_USB20_MASTER_CLK>; assigned-clock-rates = <19200000>, <60000000>; + interconnects = <&pnoc MASTER_USB_HS &bimc SLAVE_EBI_CH0>, + <&bimc MASTER_AMPSS_M0 &pnoc SLAVE_USB_HS>; + interconnect-names = "usb-ddr", "apps-usb"; power-domains = <&gcc USB30_GDSC>; qcom,select-utmi-as-pipe-clk; status = "disabled"; diff --git a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts index 443599a5a5dd57..f8ab03f106a1b7 100644 --- a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts +++ b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-natrium.dts @@ -39,10 +39,8 @@ touchscreen@20 { }; }; -&gpu { - zap-shader { - firmware-name = "qcom/msm8996/natrium/a530_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/msm8996/natrium/a530_zap.mbn"; }; &mdss_dsi0 { diff --git a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts index 33d84ac541e1c5..1cc33c3123a4e0 100644 --- a/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts +++ b/arch/arm64/boot/dts/qcom/msm8996pro-xiaomi-scorpio.dts @@ -91,10 +91,8 @@ touchscreen: atmel-mxt-ts@4a { }; }; -&gpu { - zap-shader { - firmware-name = "qcom/msm8996/scorpio/a530_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/msm8996/scorpio/a530_zap.mbn"; }; &mdp_smmu { diff --git a/arch/arm64/boot/dts/qcom/pmi8950.dtsi b/arch/arm64/boot/dts/qcom/pmi8950.dtsi index 3d3b1cd97cc3d0..5bd91a5cd1245f 100644 --- a/arch/arm64/boot/dts/qcom/pmi8950.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8950.dtsi @@ -22,19 +22,19 @@ pmi8950_vadc: adc@3100 { channel@0 { reg = ; - qcom,pre-scaling = <1 4>; + qcom,pre-scaling = <1 20>; label = "usbin"; }; channel@1 { reg = ; - qcom,pre-scaling = <1 4>; + qcom,pre-scaling = <1 20>; label = "dcin"; }; channel@2 { reg = ; - qcom,pre-scaling = <1 1>; + qcom,pre-scaling = <1 3>; label = "vchg_sns"; }; @@ -55,6 +55,14 @@ channel@d { qcom,pre-scaling = <1 1>; label = "chg_temp"; }; + + channel@e { + reg = ; + }; + + channel@f { + reg = ; + }; }; pmi8950_mpps: mpps@a000 { diff --git a/arch/arm64/boot/dts/qcom/purwa.dtsi b/arch/arm64/boot/dts/qcom/purwa.dtsi new file mode 100644 index 00000000000000..2cecd2dd0de8c3 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/purwa.dtsi @@ -0,0 +1,754 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/* X1P42100 is heavily based on hamoa, with some meaningful differences */ +#include "hamoa.dtsi" + +/delete-node/ &bwmon_cluster0; +/delete-node/ &cluster_pd2; +/delete-node/ &cpu_map_cluster2; +/delete-node/ &cpu8; +/delete-node/ &cpu9; +/delete-node/ &cpu10; +/delete-node/ &cpu11; +/delete-node/ &cpu_pd8; +/delete-node/ &cpu_pd9; +/delete-node/ &cpu_pd10; +/delete-node/ &cpu_pd11; +/delete-node/ &gpu_opp_table; +/delete-node/ &gpu_speed_bin; +/delete-node/ &pcie3_phy; +/delete-node/ &thermal_zones; + +&gcc { + compatible = "qcom,x1p42100-gcc", "qcom,x1e80100-gcc"; +}; + +&gmu { + compatible = "qcom,adreno-gmu-x145.0", "qcom,adreno-gmu"; +}; + +&gpu { + compatible = "qcom,adreno-43030c00", "qcom,adreno"; + + nvmem-cells = <&gpu_speed_bin>; + nvmem-cell-names = "speed_bin"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2-adreno", "operating-points-v2"; + + opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-level = ; + opp-peak-kBps = <16500000>; + qcom,opp-acd-level = <0xa8295ffd>; + opp-supported-hw = <0x3>; + }; + + opp-1250000000 { + opp-hz = /bits/ 64 <1250000000>; + opp-level = ; + opp-peak-kBps = <16500000>; + qcom,opp-acd-level = <0x882a5ffd>; + opp-supported-hw = <0x7>; + }; + + opp-1107000000 { + opp-hz = /bits/ 64 <1107000000>; + opp-level = ; + opp-peak-kBps = <16500000>; + qcom,opp-acd-level = <0x882a5ffd>; + opp-supported-hw = <0xf>; + }; + + opp-1014000000 { + opp-hz = /bits/ 64 <1014000000>; + opp-level = ; + opp-peak-kBps = <14398438>; + qcom,opp-acd-level = <0xa82a5ffd>; + opp-supported-hw = <0xf>; + }; + + opp-940000000 { + opp-hz = /bits/ 64 <940000000>; + opp-level = ; + opp-peak-kBps = <14398438>; + qcom,opp-acd-level = <0xa82a5ffd>; + opp-supported-hw = <0xf>; + }; + + opp-825000000 { + opp-hz = /bits/ 64 <825000000>; + opp-level = ; + opp-peak-kBps = <12449219>; + qcom,opp-acd-level = <0x882b5ffd>; + opp-supported-hw = <0xf>; + }; + + opp-720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-level = ; + opp-peak-kBps = <10687500>; + qcom,opp-acd-level = <0xa82c5ffd>; + opp-supported-hw = <0xf>; + }; + + opp-666000000-0 { + opp-hz = /bits/ 64 <666000000>; + opp-level = ; + opp-peak-kBps = <8171875>; + qcom,opp-acd-level = <0xa82d5ffd>; + opp-supported-hw = <0xf>; + }; + + /* Only applicable for SKUs which has 666Mhz as Fmax */ + opp-666000000-1 { + opp-hz = /bits/ 64 <666000000>; + opp-level = ; + opp-peak-kBps = <16500000>; + qcom,opp-acd-level = <0xa82d5ffd>; + opp-supported-hw = <0x10>; + }; + + opp-550000000 { + opp-hz = /bits/ 64 <550000000>; + opp-level = ; + opp-peak-kBps = <6074219>; + qcom,opp-acd-level = <0x882e5ffd>; + opp-supported-hw = <0x1f>; + }; + + opp-380000000 { + opp-hz = /bits/ 64 <380000000>; + opp-level = ; + opp-peak-kBps = <3000000>; + qcom,opp-acd-level = <0xc82f5ffd>; + opp-supported-hw = <0x1f>; + }; + + opp-280000000 { + opp-hz = /bits/ 64 <280000000>; + opp-level = ; + opp-peak-kBps = <2136719>; + qcom,opp-acd-level = <0xc82f5ffd>; + opp-supported-hw = <0x1f>; + }; + }; + +}; + +&gpucc { + compatible = "qcom,x1p42100-gpucc"; +}; + +/* PCIe3 has half the lanes compared to X1E80100 */ +&pcie3 { + num-lanes = <4>; +}; + +&pcie6a_phy { + compatible = "qcom,x1p42100-qmp-gen4x4-pcie-phy"; +}; + +&qfprom { + gpu_speed_bin: gpu-speed-bin@119 { + reg = <0x119 0x2>; + bits = <7 9>; + }; +}; + +&soc { + /* The PCIe3 PHY on X1P42100 uses a different IP block */ + pcie3_phy: phy@1bd4000 { + compatible = "qcom,x1p42100-qmp-gen4x4-pcie-phy"; + reg = <0x0 0x01bd4000 0x0 0x2000>, + <0x0 0x01bd6000 0x0 0x2000>; + + clocks = <&gcc GCC_PCIE_3_PHY_AUX_CLK>, + <&gcc GCC_PCIE_3_CFG_AHB_CLK>, + <&tcsr TCSR_PCIE_8L_CLKREF_EN>, + <&gcc GCC_PCIE_3_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_3_PIPE_CLK>, + <&gcc GCC_PCIE_3_PIPEDIV2_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe", + "pipediv2"; + + resets = <&gcc GCC_PCIE_3_PHY_BCR>, + <&gcc GCC_PCIE_3_NOCSR_COM_PHY_BCR>; + reset-names = "phy", + "phy_nocsr"; + + assigned-clocks = <&gcc GCC_PCIE_3_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc GCC_PCIE_3_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie3_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; +}; + +/* While physically present, this controller is left unconfigured and unused */ +&tsens3 { + status = "disabled"; +}; + +/ { + thermal-zones { + aoss0-thermal { + thermal-sensors = <&tsens0 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-0-top-thermal { + thermal-sensors = <&tsens0 1>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-0-btm-thermal { + thermal-sensors = <&tsens0 2>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-1-top-thermal { + thermal-sensors = <&tsens0 3>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-1-btm-thermal { + thermal-sensors = <&tsens0 4>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-2-top-thermal { + thermal-sensors = <&tsens0 5>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-2-btm-thermal { + thermal-sensors = <&tsens0 6>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-3-top-thermal { + thermal-sensors = <&tsens0 7>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-3-btm-thermal { + thermal-sensors = <&tsens0 8>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss0-top-thermal { + thermal-sensors = <&tsens0 9>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss0-btm-thermal { + thermal-sensors = <&tsens0 10>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mem-thermal { + thermal-sensors = <&tsens0 11>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + video-thermal { + thermal-sensors = <&tsens0 12>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + aoss1-thermal { + thermal-sensors = <&tsens1 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-0-top-thermal { + thermal-sensors = <&tsens1 1>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-0-btm-thermal { + thermal-sensors = <&tsens1 2>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-1-top-thermal { + thermal-sensors = <&tsens1 3>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-1-btm-thermal { + thermal-sensors = <&tsens1 4>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-2-top-thermal { + thermal-sensors = <&tsens1 5>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-2-btm-thermal { + thermal-sensors = <&tsens1 6>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-3-top-thermal { + thermal-sensors = <&tsens1 7>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-3-btm-thermal { + thermal-sensors = <&tsens1 8>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss1-top-thermal { + thermal-sensors = <&tsens1 9>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss1-btm-thermal { + thermal-sensors = <&tsens1 10>; + + trips { + trip-point0 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + aoss2-thermal { + thermal-sensors = <&tsens2 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + nsp0-thermal { + thermal-sensors = <&tsens2 1>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + nsp1-thermal { + thermal-sensors = <&tsens2 2>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + nsp2-thermal { + thermal-sensors = <&tsens2 3>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + nsp3-thermal { + thermal-sensors = <&tsens2 4>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-0-thermal { + polling-delay-passive = <200>; + + thermal-sensors = <&tsens2 5>; + + cooling-maps { + map0 { + trip = <&gpuss0_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + gpuss0_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-1-thermal { + polling-delay-passive = <200>; + + thermal-sensors = <&tsens2 6>; + + cooling-maps { + map0 { + trip = <&gpuss1_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + gpuss1_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-2-thermal { + polling-delay-passive = <200>; + + thermal-sensors = <&tsens2 7>; + + cooling-maps { + map0 { + trip = <&gpuss2_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + gpuss2_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpuss-3-thermal { + polling-delay-passive = <200>; + + thermal-sensors = <&tsens2 8>; + + cooling-maps { + map0 { + trip = <&gpuss3_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + gpuss3_alert0: trip-point0 { + temperature = <95000>; + hysteresis = <1000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + camera0-thermal { + thermal-sensors = <&tsens2 9>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + camera1-thermal { + thermal-sensors = <&tsens2 10>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi deleted file mode 100644 index 08141b41de2462..00000000000000 --- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi +++ /dev/null @@ -1,2592 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) -/* - * Copyright (c) 2023, Linaro Ltd - * - * Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/ { - interrupt-parent = <&intc>; - - #address-cells = <2>; - #size-cells = <2>; - - chosen { }; - - clocks { - xo_board: xo-board { - compatible = "fixed-clock"; - #clock-cells = <0>; - }; - - sleep_clk: sleep-clk { - compatible = "fixed-clock"; - clock-frequency = <32764>; - #clock-cells = <0>; - }; - }; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x0>; - clocks = <&cpufreq_hw 0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; - enable-method = "psci"; - next-level-cache = <&l2_0>; - qcom,freq-domain = <&cpufreq_hw 0>; - power-domains = <&cpu_pd0>; - power-domain-names = "psci"; - l2_0: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - }; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x1>; - clocks = <&cpufreq_hw 0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; - enable-method = "psci"; - next-level-cache = <&l2_0>; - qcom,freq-domain = <&cpufreq_hw 0>; - power-domains = <&cpu_pd1>; - power-domain-names = "psci"; - }; - - cpu2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x2>; - clocks = <&cpufreq_hw 0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; - enable-method = "psci"; - next-level-cache = <&l2_0>; - qcom,freq-domain = <&cpufreq_hw 0>; - power-domains = <&cpu_pd2>; - power-domain-names = "psci"; - }; - - cpu3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x3>; - clocks = <&cpufreq_hw 0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; - enable-method = "psci"; - next-level-cache = <&l2_0>; - qcom,freq-domain = <&cpufreq_hw 0>; - power-domains = <&cpu_pd3>; - power-domain-names = "psci"; - }; - - cpu-map { - cluster0 { - core0 { - cpu = <&cpu0>; - }; - - core1 { - cpu = <&cpu1>; - }; - - core2 { - cpu = <&cpu2>; - }; - - core3 { - cpu = <&cpu3>; - }; - }; - }; - - domain-idle-states { - cluster_sleep: cluster-sleep-0 { - compatible = "domain-idle-state"; - arm,psci-suspend-param = <0x41000043>; - entry-latency-us = <800>; - exit-latency-us = <2118>; - min-residency-us = <7376>; - }; - }; - - idle-states { - entry-method = "psci"; - - cpu_sleep: cpu-sleep-0 { - compatible = "arm,idle-state"; - idle-state-name = "power-collapse"; - arm,psci-suspend-param = <0x40000003>; - entry-latency-us = <290>; - exit-latency-us = <376>; - min-residency-us = <1182>; - local-timer-stop; - }; - }; - }; - - firmware { - scm: scm { - compatible = "qcom,scm-qcm2290", "qcom,scm"; - clocks = <&rpmcc RPM_SMD_CE1_CLK>; - clock-names = "core"; - qcom,dload-mode = <&tcsr_regs 0x13000>; - #reset-cells = <1>; - interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG - &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; - }; - }; - - memory@40000000 { - device_type = "memory"; - /* We expect the bootloader to fill in the size */ - reg = <0 0x40000000 0 0>; - }; - - pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = ; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - - cpu_pd0: power-domain-cpu0 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd>; - domain-idle-states = <&cpu_sleep>; - }; - - cpu_pd1: power-domain-cpu1 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd>; - domain-idle-states = <&cpu_sleep>; - }; - - cpu_pd2: power-domain-cpu2 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd>; - domain-idle-states = <&cpu_sleep>; - }; - - cpu_pd3: power-domain-cpu3 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd>; - domain-idle-states = <&cpu_sleep>; - }; - - cluster_pd: power-domain-cpu-cluster { - #power-domain-cells = <0>; - power-domains = <&mpm>; - domain-idle-states = <&cluster_sleep>; - }; - }; - - rpm: remoteproc { - compatible = "qcom,qcm2290-rpm-proc", "qcom,rpm-proc"; - - glink-edge { - compatible = "qcom,glink-rpm"; - interrupts = ; - qcom,rpm-msg-ram = <&rpm_msg_ram>; - mboxes = <&apcs_glb 0>; - - rpm_requests: rpm-requests { - compatible = "qcom,rpm-qcm2290", "qcom,glink-smd-rpm"; - qcom,glink-channels = "rpm_requests"; - - rpmcc: clock-controller { - compatible = "qcom,rpmcc-qcm2290", "qcom,rpmcc"; - clocks = <&xo_board>; - clock-names = "xo"; - #clock-cells = <1>; - }; - - rpmpd: power-controller { - compatible = "qcom,qcm2290-rpmpd"; - #power-domain-cells = <1>; - operating-points-v2 = <&rpmpd_opp_table>; - - rpmpd_opp_table: opp-table { - compatible = "operating-points-v2"; - - rpmpd_opp_min_svs: opp1 { - opp-level = ; - }; - - rpmpd_opp_low_svs: opp2 { - opp-level = ; - }; - - rpmpd_opp_svs: opp3 { - opp-level = ; - }; - - rpmpd_opp_svs_plus: opp4 { - opp-level = ; - }; - - rpmpd_opp_nom: opp5 { - opp-level = ; - }; - - rpmpd_opp_nom_plus: opp6 { - opp-level = ; - }; - - rpmpd_opp_turbo: opp7 { - opp-level = ; - }; - - rpmpd_opp_turbo_plus: opp8 { - opp-level = ; - }; - }; - }; - }; - }; - - mpm: interrupt-controller { - compatible = "qcom,mpm"; - qcom,rpm-msg-ram = <&apss_mpm>; - interrupts = ; - mboxes = <&apcs_glb 1>; - interrupt-controller; - #interrupt-cells = <2>; - #power-domain-cells = <0>; - interrupt-parent = <&intc>; - qcom,mpm-pin-count = <96>; - qcom,mpm-pin-map = <2 275>, /* TSENS0 uplow */ - <5 296>, /* Soundwire master_irq */ - <12 422>, /* DWC3 ss_phy_irq */ - <24 79>, /* Soundwire wake_irq */ - <86 183>, /* MPM wake, SPMI */ - <90 260>; /* QUSB2_PHY DP+DM */ - }; - }; - - reserved_memory: reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - hyp_mem: hyp@45700000 { - reg = <0x0 0x45700000 0x0 0x600000>; - no-map; - }; - - xbl_aop_mem: xbl-aop@45e00000 { - reg = <0x0 0x45e00000 0x0 0x140000>; - no-map; - }; - - sec_apps_mem: sec-apps@45fff000 { - reg = <0x0 0x45fff000 0x0 0x1000>; - no-map; - }; - - smem_mem: smem@46000000 { - compatible = "qcom,smem"; - reg = <0x0 0x46000000 0x0 0x200000>; - no-map; - - hwlocks = <&tcsr_mutex 3>; - qcom,rpm-msg-ram = <&rpm_msg_ram>; - }; - - pil_modem_mem: modem@4ab00000 { - reg = <0x0 0x4ab00000 0x0 0x6900000>; - no-map; - }; - - pil_video_mem: video@51400000 { - reg = <0x0 0x51400000 0x0 0x500000>; - no-map; - }; - - wlan_msa_mem: wlan-msa@51900000 { - reg = <0x0 0x51900000 0x0 0x100000>; - no-map; - }; - - pil_adsp_mem: adsp@51a00000 { - reg = <0x0 0x51a00000 0x0 0x1c00000>; - no-map; - }; - - pil_ipa_fw_mem: ipa-fw@53600000 { - reg = <0x0 0x53600000 0x0 0x10000>; - no-map; - }; - - pil_ipa_gsi_mem: ipa-gsi@53610000 { - reg = <0x0 0x53610000 0x0 0x5000>; - no-map; - }; - - pil_gpu_mem: zap@53615000 { - compatible = "shared-dma-pool"; - reg = <0x0 0x53615000 0x0 0x2000>; - no-map; - }; - - cont_splash_memory: framebuffer@5c000000 { - reg = <0x0 0x5c000000 0x0 0x00f00000>; - no-map; - }; - - dfps_data_memory: dpfs-data@5cf00000 { - reg = <0x0 0x5cf00000 0x0 0x0100000>; - no-map; - }; - - removed_mem: reserved@60000000 { - reg = <0x0 0x60000000 0x0 0x3900000>; - no-map; - }; - - rmtfs_mem: memory@89b01000 { - compatible = "qcom,rmtfs-mem"; - reg = <0x0 0x89b01000 0x0 0x200000>; - no-map; - - qcom,client-id = <1>; - qcom,vmid = ; - }; - }; - - smp2p-adsp { - compatible = "qcom,smp2p"; - qcom,smem = <443>, <429>; - - interrupts = ; - - mboxes = <&apcs_glb 10>; - - qcom,local-pid = <0>; - qcom,remote-pid = <2>; - - adsp_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; - - adsp_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - smp2p-mpss { - compatible = "qcom,smp2p"; - qcom,smem = <435>, <428>; - - interrupts = ; - - mboxes = <&apcs_glb 14>; - - qcom,local-pid = <0>; - qcom,remote-pid = <1>; - - modem_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; - - modem_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - wlan_smp2p_in: wlan-wpss-to-ap { - qcom,entry-name = "wlan"; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - soc: soc@0 { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0 0 0 0 0x10 0>; - dma-ranges = <0 0 0 0 0x10 0>; - - tcsr_mutex: hwlock@340000 { - compatible = "qcom,tcsr-mutex"; - reg = <0x0 0x00340000 0x0 0x20000>; - #hwlock-cells = <1>; - }; - - tcsr_regs: syscon@3c0000 { - compatible = "qcom,qcm2290-tcsr", "syscon"; - reg = <0x0 0x003c0000 0x0 0x40000>; - }; - - tlmm: pinctrl@500000 { - compatible = "qcom,qcm2290-tlmm"; - reg = <0x0 0x00500000 0x0 0x300000>; - interrupts = ; - gpio-controller; - gpio-ranges = <&tlmm 0 0 127>; - wakeup-parent = <&mpm>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - - qup_i2c0_default: qup-i2c0-default-state { - pins = "gpio0", "gpio1"; - function = "qup0"; - drive-strength = <2>; - bias-pull-up; - }; - - qup_i2c1_default: qup-i2c1-default-state { - pins = "gpio4", "gpio5"; - function = "qup1"; - drive-strength = <2>; - bias-pull-up; - }; - - qup_i2c2_default: qup-i2c2-default-state { - pins = "gpio6", "gpio7"; - function = "qup2"; - drive-strength = <2>; - bias-pull-up; - }; - - qup_i2c3_default: qup-i2c3-default-state { - pins = "gpio8", "gpio9"; - function = "qup3"; - drive-strength = <2>; - bias-pull-up; - }; - - qup_i2c4_default: qup-i2c4-default-state { - pins = "gpio12", "gpio13"; - function = "qup4"; - drive-strength = <2>; - bias-pull-up; - }; - - qup_i2c5_default: qup-i2c5-default-state { - pins = "gpio14", "gpio15"; - function = "qup5"; - drive-strength = <2>; - bias-pull-up; - }; - - qup_spi0_default: qup-spi0-default-state { - pins = "gpio0", "gpio1","gpio2", "gpio3"; - function = "qup0"; - drive-strength = <2>; - bias-pull-up; - }; - - qup_spi1_default: qup-spi1-default-state { - pins = "gpio4", "gpio5", "gpio69", "gpio70"; - function = "qup1"; - drive-strength = <2>; - bias-pull-up; - }; - - qup_spi2_default: qup-spi2-default-state { - pins = "gpio6", "gpio7", "gpio71", "gpio80"; - function = "qup2"; - drive-strength = <2>; - bias-pull-up; - }; - - qup_spi3_default: qup-spi3-default-state { - pins = "gpio8", "gpio9", "gpio10", "gpio11"; - function = "qup3"; - drive-strength = <2>; - bias-pull-up; - }; - - qup_spi4_default: qup-spi4-default-state { - pins = "gpio12", "gpio13", "gpio96", "gpio97"; - function = "qup4"; - drive-strength = <2>; - bias-pull-up; - }; - - qup_spi5_default: qup-spi5-default-state { - pins = "gpio14", "gpio15", "gpio16", "gpio17"; - function = "qup5"; - drive-strength = <2>; - bias-pull-up; - }; - - qup_uart0_default: qup-uart0-default-state { - pins = "gpio0", "gpio1", "gpio2", "gpio3"; - function = "qup0"; - drive-strength = <2>; - bias-disable; - }; - - qup_uart3_default: qup-uart3-default-state { - pins = "gpio8", "gpio9", "gpio10", "gpio11"; - function = "qup3"; - drive-strength = <2>; - bias-disable; - }; - - qup_uart4_default: qup-uart4-default-state { - pins = "gpio12", "gpio13"; - function = "qup4"; - drive-strength = <2>; - bias-disable; - }; - - cci0_default: cci0-default-state { - pins = "gpio22", "gpio23"; - function = "cci_i2c"; - drive-strength = <2>; - bias-disable; - }; - - cci1_default: cci1-default-state { - pins = "gpio29", "gpio30"; - function = "cci_i2c"; - drive-strength = <2>; - bias-disable; - }; - - sdc1_state_on: sdc1-on-state { - clk-pins { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-pins { - pins = "sdc1_cmd"; - drive-strength = <10>; - bias-pull-up; - }; - - data-pins { - pins = "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - - rclk-pins { - pins = "sdc1_rclk"; - bias-pull-down; - }; - }; - - sdc1_state_off: sdc1-off-state { - clk-pins { - pins = "sdc1_clk"; - drive-strength = <2>; - bias-disable; - }; - - cmd-pins { - pins = "sdc1_cmd"; - drive-strength = <2>; - bias-pull-up; - }; - - data-pins { - pins = "sdc1_data"; - drive-strength = <2>; - bias-pull-up; - }; - - rclk-pins { - pins = "sdc1_rclk"; - bias-pull-down; - }; - }; - - sdc2_state_on: sdc2-on-state { - clk-pins { - pins = "sdc2_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-pins { - pins = "sdc2_cmd"; - drive-strength = <10>; - bias-pull-up; - }; - - data-pins { - pins = "sdc2_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - sdc2_state_off: sdc2-off-state { - clk-pins { - pins = "sdc2_clk"; - drive-strength = <2>; - bias-disable; - }; - - cmd-pins { - pins = "sdc2_cmd"; - drive-strength = <2>; - bias-pull-up; - }; - - data-pins { - pins = "sdc2_data"; - drive-strength = <2>; - bias-pull-up; - }; - }; - }; - - gcc: clock-controller@1400000 { - compatible = "qcom,gcc-qcm2290"; - reg = <0x0 0x01400000 0x0 0x1f0000>; - clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; - clock-names = "bi_tcxo", "sleep_clk"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; - - usb_hsphy: phy@1613000 { - compatible = "qcom,qcm2290-qusb2-phy"; - reg = <0x0 0x01613000 0x0 0x180>; - - clocks = <&gcc GCC_AHB2PHY_USB_CLK>, - <&rpmcc RPM_SMD_XO_CLK_SRC>; - clock-names = "cfg_ahb", "ref"; - - resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; - nvmem-cells = <&qusb2_hstx_trim>; - #phy-cells = <0>; - - status = "disabled"; - }; - - usb_qmpphy: phy@1615000 { - compatible = "qcom,qcm2290-qmp-usb3-phy"; - reg = <0x0 0x01615000 0x0 0x1000>; - - clocks = <&gcc GCC_AHB2PHY_USB_CLK>, - <&gcc GCC_USB3_PRIM_CLKREF_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, - <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "cfg_ahb", - "ref", - "com_aux", - "pipe"; - - resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>, - <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>; - reset-names = "phy", - "phy_phy"; - - #clock-cells = <0>; - clock-output-names = "usb3_phy_pipe_clk_src"; - - #phy-cells = <0>; - orientation-switch; - - qcom,tcsr-reg = <&tcsr_regs 0xb244>; - - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - usb_qmpphy_out: endpoint { - }; - }; - - port@1 { - reg = <1>; - - usb_qmpphy_usb_ss_in: endpoint { - remote-endpoint = <&usb_dwc3_ss>; - }; - }; - }; - }; - - system_noc: interconnect@1880000 { - compatible = "qcom,qcm2290-snoc"; - reg = <0x0 0x01880000 0x0 0x60200>; - #interconnect-cells = <2>; - - qup_virt: interconnect-qup { - compatible = "qcom,qcm2290-qup-virt"; - #interconnect-cells = <2>; - }; - - mmnrt_virt: interconnect-mmnrt { - compatible = "qcom,qcm2290-mmnrt-virt"; - #interconnect-cells = <2>; - }; - - mmrt_virt: interconnect-mmrt { - compatible = "qcom,qcm2290-mmrt-virt"; - #interconnect-cells = <2>; - }; - }; - - config_noc: interconnect@1900000 { - compatible = "qcom,qcm2290-cnoc"; - reg = <0x0 0x01900000 0x0 0x8200>; - #interconnect-cells = <2>; - }; - - cryptobam: dma-controller@1b04000 { - compatible = "qcom,bam-v1.7.0"; - reg = <0x0 0x01b04000 0x0 0x24000>; - interrupts = ; - clocks = <&rpmcc RPM_SMD_CE1_CLK>; - clock-names = "bam_clk"; - #dma-cells = <1>; - qcom,ee = <0>; - qcom,controlled-remotely; - iommus = <&apps_smmu 0x0084 0x11>, - <&apps_smmu 0x0086 0x11>; - }; - - crypto: crypto@1b3a000 { - compatible = "qcom,qcm2290-qce", "qcom,ipq4019-qce", "qcom,qce"; - reg = <0x0 0x01b3a000 0x0 0x6000>; - clocks = <&rpmcc RPM_SMD_CE1_CLK>; - clock-names = "core"; - dmas = <&cryptobam 6>, <&cryptobam 7>; - dma-names = "rx", "tx"; - iommus = <&apps_smmu 0x0084 0x11>, - <&apps_smmu 0x0086 0x11>; - }; - - qfprom@1b44000 { - compatible = "qcom,qcm2290-qfprom", "qcom,qfprom"; - reg = <0x0 0x01b44000 0x0 0x3000>; - #address-cells = <1>; - #size-cells = <1>; - - qusb2_hstx_trim: hstx-trim@25b { - reg = <0x25b 0x1>; - bits = <1 4>; - }; - - gpu_speed_bin: gpu-speed-bin@2006 { - reg = <0x2006 0x2>; - bits = <5 8>; - }; - }; - - pmu@1b8e300 { - compatible = "qcom,qcm2290-cpu-bwmon", "qcom,sdm845-bwmon"; - reg = <0x0 0x01b8e300 0x0 0x600>; - interrupts = ; - - operating-points-v2 = <&cpu_bwmon_opp_table>; - interconnects = <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG - &bimc SLAVE_EBI1 RPM_ACTIVE_TAG>; - - cpu_bwmon_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-0 { - opp-peak-kBps = <(200 * 4 * 1000)>; - }; - - opp-1 { - opp-peak-kBps = <(300 * 4 * 1000)>; - }; - - opp-2 { - opp-peak-kBps = <(451 * 4 * 1000)>; - }; - - opp-3 { - opp-peak-kBps = <(547 * 4 * 1000)>; - }; - - opp-4 { - opp-peak-kBps = <(681 * 4 * 1000)>; - }; - - opp-5 { - opp-peak-kBps = <(768 * 4 * 1000)>; - }; - - opp-6 { - opp-peak-kBps = <(1017 * 4 * 1000)>; - }; - - opp-7 { - opp-peak-kBps = <(1353 * 4 * 1000)>; - }; - - opp-8 { - opp-peak-kBps = <(1555 * 4 * 1000)>; - }; - - opp-9 { - opp-peak-kBps = <(1804 * 4 * 1000)>; - }; - }; - }; - - spmi_bus: spmi@1c40000 { - compatible = "qcom,spmi-pmic-arb"; - reg = <0x0 0x01c40000 0x0 0x1100>, - <0x0 0x01e00000 0x0 0x2000000>, - <0x0 0x03e00000 0x0 0x100000>, - <0x0 0x03f00000 0x0 0xa0000>, - <0x0 0x01c0a000 0x0 0x26000>; - reg-names = "core", - "chnls", - "obsrvr", - "intr", - "cnfg"; - interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "periph_irq"; - qcom,ee = <0>; - qcom,channel = <0>; - #address-cells = <2>; - #size-cells = <0>; - interrupt-controller; - #interrupt-cells = <4>; - }; - - tsens0: thermal-sensor@4411000 { - compatible = "qcom,qcm2290-tsens", "qcom,tsens-v2"; - reg = <0x0 0x04411000 0x0 0x1ff>, - <0x0 0x04410000 0x0 0x8>; - #qcom,sensors = <10>; - interrupts-extended = <&mpm 2 IRQ_TYPE_LEVEL_HIGH>, - <&intc GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "uplow", "critical"; - #thermal-sensor-cells = <1>; - }; - - rng: rng@4453000 { - compatible = "qcom,prng-ee"; - reg = <0x0 0x04453000 0x0 0x1000>; - clocks = <&rpmcc RPM_SMD_HWKM_CLK>; - clock-names = "core"; - }; - - bimc: interconnect@4480000 { - compatible = "qcom,qcm2290-bimc"; - reg = <0x0 0x04480000 0x0 0x80000>; - #interconnect-cells = <2>; - }; - - rpm_msg_ram: sram@45f0000 { - compatible = "qcom,rpm-msg-ram", "mmio-sram"; - reg = <0x0 0x045f0000 0x0 0x7000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x0 0x045f0000 0x7000>; - - apss_mpm: sram@1b8 { - reg = <0x1b8 0x48>; - }; - }; - - sram@4690000 { - compatible = "qcom,rpm-stats"; - reg = <0x0 0x04690000 0x0 0x10000>; - }; - - sdhc_1: mmc@4744000 { - compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5"; - reg = <0x0 0x04744000 0x0 0x1000>, - <0x0 0x04745000 0x0 0x1000>, - <0x0 0x04748000 0x0 0x8000>; - reg-names = "hc", - "cqhci", - "ice"; - - interrupts = , - ; - interrupt-names = "hc_irq", "pwr_irq"; - - clocks = <&gcc GCC_SDCC1_AHB_CLK>, - <&gcc GCC_SDCC1_APPS_CLK>, - <&rpmcc RPM_SMD_XO_CLK_SRC>, - <&gcc GCC_SDCC1_ICE_CORE_CLK>; - clock-names = "iface", - "core", - "xo", - "ice"; - - resets = <&gcc GCC_SDCC1_BCR>; - - power-domains = <&rpmpd QCM2290_VDDCX>; - operating-points-v2 = <&sdhc1_opp_table>; - iommus = <&apps_smmu 0xc0 0x0>; - interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG - &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, - <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc SLAVE_SDCC_1 RPM_ALWAYS_TAG>; - interconnect-names = "sdhc-ddr", - "cpu-sdhc"; - - qcom,dll-config = <0x000f642c>; - qcom,ddr-config = <0x80040868>; - bus-width = <8>; - - mmc-ddr-1_8v; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - - status = "disabled"; - - sdhc1_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmpd_opp_low_svs>; - opp-peak-kBps = <250000 133320>; - opp-avg-kBps = <102400 65000>; - }; - - opp-192000000 { - opp-hz = /bits/ 64 <192000000>; - required-opps = <&rpmpd_opp_low_svs>; - opp-peak-kBps = <800000 300000>; - opp-avg-kBps = <204800 200000>; - }; - - opp-384000000 { - opp-hz = /bits/ 64 <384000000>; - required-opps = <&rpmpd_opp_svs_plus>; - opp-peak-kBps = <800000 300000>; - opp-avg-kBps = <204800 200000>; - }; - }; - }; - - sdhc_2: mmc@4784000 { - compatible = "qcom,qcm2290-sdhci", "qcom,sdhci-msm-v5"; - reg = <0x0 0x04784000 0x0 0x1000>; - reg-names = "hc"; - - interrupts = , - ; - interrupt-names = "hc_irq", "pwr_irq"; - - clocks = <&gcc GCC_SDCC2_AHB_CLK>, - <&gcc GCC_SDCC2_APPS_CLK>, - <&rpmcc RPM_SMD_XO_CLK_SRC>; - clock-names = "iface", - "core", - "xo"; - - resets = <&gcc GCC_SDCC2_BCR>; - - power-domains = <&rpmpd QCM2290_VDDCX>; - operating-points-v2 = <&sdhc2_opp_table>; - iommus = <&apps_smmu 0xa0 0x0>; - interconnects = <&system_noc MASTER_SDCC_2 RPM_ALWAYS_TAG - &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, - <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc SLAVE_SDCC_2 RPM_ALWAYS_TAG>; - interconnect-names = "sdhc-ddr", - "cpu-sdhc"; - - qcom,dll-config = <0x0007642c>; - qcom,ddr-config = <0x80040868>; - bus-width = <4>; - - status = "disabled"; - - sdhc2_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmpd_opp_low_svs>; - opp-peak-kBps = <250000 133320>; - opp-avg-kBps = <261438 150000>; - }; - - opp-202000000 { - opp-hz = /bits/ 64 <202000000>; - required-opps = <&rpmpd_opp_svs_plus>; - opp-peak-kBps = <800000 300000>; - opp-avg-kBps = <261438 300000>; - }; - }; - }; - - gpi_dma0: dma-controller@4a00000 { - compatible = "qcom,qcm2290-gpi-dma", "qcom,sm6350-gpi-dma"; - reg = <0x0 0x04a00000 0x0 0x60000>; - interrupts = , - , - , - , - , - , - , - , - , - ; - dma-channels = <10>; - dma-channel-mask = <0x1f>; - iommus = <&apps_smmu 0xf6 0x0>; - #dma-cells = <3>; - status = "disabled"; - }; - - qupv3_id_0: geniqup@4ac0000 { - compatible = "qcom,geni-se-qup"; - reg = <0x0 0x04ac0000 0x0 0x2000>; - clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, - <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; - clock-names = "m-ahb", "s-ahb"; - iommus = <&apps_smmu 0xe3 0x0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - status = "disabled"; - - i2c0: i2c@4a80000 { - compatible = "qcom,geni-i2c"; - reg = <0x0 0x04a80000 0x0 0x4000>; - interrupts = ; - clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_i2c0_default>; - pinctrl-names = "default"; - dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, - <&gpi_dma0 1 0 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG - &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, - <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, - <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG - &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi0: spi@4a80000 { - compatible = "qcom,geni-spi"; - reg = <0x0 0x04a80000 0x0 0x4000>; - interrupts = ; - clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_spi0_default>; - pinctrl-names = "default"; - dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, - <&gpi_dma0 1 0 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG - &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, - <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; - interconnect-names = "qup-core", - "qup-config"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - uart0: serial@4a80000 { - compatible = "qcom,geni-uart"; - reg = <0x0 0x04a80000 0x0 0x4000>; - interrupts = ; - clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_uart0_default>; - pinctrl-names = "default"; - interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG - &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, - <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; - interconnect-names = "qup-core", - "qup-config"; - status = "disabled"; - }; - - i2c1: i2c@4a84000 { - compatible = "qcom,geni-i2c"; - reg = <0x0 0x04a84000 0x0 0x4000>; - interrupts = ; - clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_i2c1_default>; - pinctrl-names = "default"; - dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, - <&gpi_dma0 1 1 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG - &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, - <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, - <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG - &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi1: spi@4a84000 { - compatible = "qcom,geni-spi"; - reg = <0x0 0x04a84000 0x0 0x4000>; - interrupts = ; - clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_spi1_default>; - pinctrl-names = "default"; - dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, - <&gpi_dma0 1 1 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG - &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, - <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; - interconnect-names = "qup-core", - "qup-config"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c2: i2c@4a88000 { - compatible = "qcom,geni-i2c"; - reg = <0x0 0x04a88000 0x0 0x4000>; - interrupts = ; - clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_i2c2_default>; - pinctrl-names = "default"; - dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, - <&gpi_dma0 1 2 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG - &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, - <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, - <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG - &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi2: spi@4a88000 { - compatible = "qcom,geni-spi"; - reg = <0x0 0x04a88000 0x0 0x4000>; - interrupts = ; - clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_spi2_default>; - pinctrl-names = "default"; - dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, - <&gpi_dma0 1 2 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG - &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, - <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; - interconnect-names = "qup-core", - "qup-config"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c3: i2c@4a8c000 { - compatible = "qcom,geni-i2c"; - reg = <0x0 0x04a8c000 0x0 0x4000>; - interrupts = ; - clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_i2c3_default>; - pinctrl-names = "default"; - dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, - <&gpi_dma0 1 3 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG - &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, - <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, - <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG - &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi3: spi@4a8c000 { - compatible = "qcom,geni-spi"; - reg = <0x0 0x04a8c000 0x0 0x4000>; - interrupts = ; - clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_spi3_default>; - pinctrl-names = "default"; - dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, - <&gpi_dma0 1 3 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG - &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, - <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; - interconnect-names = "qup-core", - "qup-config"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - uart3: serial@4a8c000 { - compatible = "qcom,geni-uart"; - reg = <0x0 0x04a8c000 0x0 0x4000>; - interrupts = ; - clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_uart3_default>; - pinctrl-names = "default"; - interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG - &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, - <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; - interconnect-names = "qup-core", - "qup-config"; - status = "disabled"; - }; - - i2c4: i2c@4a90000 { - compatible = "qcom,geni-i2c"; - reg = <0x0 0x04a90000 0x0 0x4000>; - interrupts = ; - clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_i2c4_default>; - pinctrl-names = "default"; - dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, - <&gpi_dma0 1 4 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG - &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, - <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, - <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG - &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi4: spi@4a90000 { - compatible = "qcom,geni-spi"; - reg = <0x0 0x04a90000 0x0 0x4000>; - interrupts = ; - clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi4_default>; - dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, - <&gpi_dma0 1 4 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG - &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, - <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; - interconnect-names = "qup-core", - "qup-config"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - uart4: serial@4a90000 { - compatible = "qcom,geni-uart"; - reg = <0x0 0x04a90000 0x0 0x4000>; - interrupts = ; - clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_uart4_default>; - pinctrl-names = "default"; - interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG - &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, - <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; - interconnect-names = "qup-core", - "qup-config"; - status = "disabled"; - }; - - i2c5: i2c@4a94000 { - compatible = "qcom,geni-i2c"; - reg = <0x0 0x04a94000 0x0 0x4000>; - interrupts = ; - clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_i2c5_default>; - pinctrl-names = "default"; - dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, - <&gpi_dma0 1 5 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG - &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, - <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, - <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG - &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spi5: spi@4a94000 { - compatible = "qcom,geni-spi"; - reg = <0x0 0x04a94000 0x0 0x4000>; - interrupts = ; - clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_spi5_default>; - pinctrl-names = "default"; - dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, - <&gpi_dma0 1 5 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG - &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, - <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; - interconnect-names = "qup-core", - "qup-config"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - }; - - usb: usb@4ef8800 { - compatible = "qcom,qcm2290-dwc3", "qcom,dwc3"; - reg = <0x0 0x04ef8800 0x0 0x400>; - interrupts-extended = <&intc GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, - <&mpm 12 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", - "ss_phy_irq"; - - clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MASTER_CLK>, - <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB3_PRIM_CLKREF_CLK>; - clock-names = "cfg_noc", - "core", - "iface", - "sleep", - "mock_utmi", - "xo"; - - assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_MASTER_CLK>; - assigned-clock-rates = <19200000>, <133333333>; - - resets = <&gcc GCC_USB30_PRIM_BCR>; - power-domains = <&gcc GCC_USB30_PRIM_GDSC>; - /* TODO: USB<->IPA path */ - interconnects = <&system_noc MASTER_USB3_0 RPM_ALWAYS_TAG - &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, - <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc SLAVE_USB3 RPM_ALWAYS_TAG>; - interconnect-names = "usb-ddr", - "apps-usb"; - wakeup-source; - - #address-cells = <2>; - #size-cells = <2>; - ranges; - - status = "disabled"; - - usb_dwc3: usb@4e00000 { - compatible = "snps,dwc3"; - reg = <0x0 0x04e00000 0x0 0xcd00>; - interrupts = ; - phys = <&usb_hsphy>, <&usb_qmpphy>; - phy-names = "usb2-phy", "usb3-phy"; - iommus = <&apps_smmu 0x120 0x0>; - snps,dis_u2_susphy_quirk; - snps,dis_enblslpm_quirk; - snps,has-lpm-erratum; - snps,hird-threshold = /bits/ 8 <0x10>; - snps,usb3_lpm_capable; - snps,parkmode-disable-ss-quirk; - maximum-speed = "super-speed"; - dr_mode = "otg"; - usb-role-switch; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - usb_dwc3_hs: endpoint { - }; - }; - - port@1 { - reg = <1>; - - usb_dwc3_ss: endpoint { - remote-endpoint = <&usb_qmpphy_usb_ss_in>; - }; - }; - }; - }; - }; - - gpu: gpu@5900000 { - compatible = "qcom,adreno-07000200", "qcom,adreno"; - reg = <0x0 0x05900000 0x0 0x40000>; - reg-names = "kgsl_3d0_reg_memory"; - - interrupts = ; - - clocks = <&gpucc GPU_CC_GX_GFX3D_CLK>, - <&gpucc GPU_CC_AHB_CLK>, - <&gcc GCC_BIMC_GPU_AXI_CLK>, - <&gcc GCC_GPU_MEMNOC_GFX_CLK>, - <&gpucc GPU_CC_CX_GMU_CLK>, - <&gpucc GPU_CC_CXO_CLK>; - clock-names = "core", - "iface", - "mem_iface", - "alt_mem_iface", - "gmu", - "xo"; - - interconnects = <&bimc MASTER_GFX3D RPM_ALWAYS_TAG - &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; - interconnect-names = "gfx-mem"; - - iommus = <&adreno_smmu 0 1>, - <&adreno_smmu 2 0>; - operating-points-v2 = <&gpu_opp_table>; - power-domains = <&rpmpd QCM2290_VDDCX>; - qcom,gmu = <&gmu_wrapper>; - - nvmem-cells = <&gpu_speed_bin>; - nvmem-cell-names = "speed_bin"; - #cooling-cells = <2>; - - status = "disabled"; - - zap-shader { - memory-region = <&pil_gpu_mem>; - }; - - gpu_opp_table: opp-table { - compatible = "operating-points-v2"; - - /* TODO: Scale RPM_SMD_BIMC_GPU_CLK w/ turbo freqs */ - opp-1123200000 { - opp-hz = /bits/ 64 <1123200000>; - required-opps = <&rpmpd_opp_turbo_plus>; - opp-peak-kBps = <6881000>; - opp-supported-hw = <0x3>; - turbo-mode; - }; - - opp-1017600000 { - opp-hz = /bits/ 64 <1017600000>; - required-opps = <&rpmpd_opp_turbo>; - opp-peak-kBps = <6881000>; - opp-supported-hw = <0x3>; - turbo-mode; - }; - - opp-921600000 { - opp-hz = /bits/ 64 <921600000>; - required-opps = <&rpmpd_opp_nom_plus>; - opp-peak-kBps = <6881000>; - opp-supported-hw = <0x3>; - }; - - opp-844800000 { - opp-hz = /bits/ 64 <844800000>; - required-opps = <&rpmpd_opp_nom>; - opp-peak-kBps = <6881000>; - opp-supported-hw = <0x7>; - }; - - opp-672000000 { - opp-hz = /bits/ 64 <672000000>; - required-opps = <&rpmpd_opp_svs_plus>; - opp-peak-kBps = <3879000>; - opp-supported-hw = <0xf>; - }; - - opp-537600000 { - opp-hz = /bits/ 64 <537600000>; - required-opps = <&rpmpd_opp_svs>; - opp-peak-kBps = <2929000>; - opp-supported-hw = <0xf>; - }; - - opp-355200000 { - opp-hz = /bits/ 64 <355200000>; - required-opps = <&rpmpd_opp_low_svs>; - opp-peak-kBps = <1720000>; - opp-supported-hw = <0xf>; - }; - }; - }; - - gmu_wrapper: gmu@596a000 { - compatible = "qcom,adreno-gmu-wrapper"; - reg = <0x0 0x0596a000 0x0 0x30000>; - reg-names = "gmu"; - power-domains = <&gpucc GPU_CX_GDSC>, - <&gpucc GPU_GX_GDSC>; - power-domain-names = "cx", - "gx"; - }; - - gpucc: clock-controller@5990000 { - compatible = "qcom,qcm2290-gpucc"; - reg = <0x0 0x05990000 0x0 0x9000>; - clocks = <&gcc GCC_GPU_CFG_AHB_CLK>, - <&rpmcc RPM_SMD_XO_CLK_SRC>, - <&gcc GCC_GPU_GPLL0_CLK_SRC>, - <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; - power-domains = <&rpmpd QCM2290_VDDCX>; - required-opps = <&rpmpd_opp_low_svs>; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; - - adreno_smmu: iommu@59a0000 { - compatible = "qcom,qcm2290-smmu-500", "qcom,adreno-smmu", - "qcom,smmu-500", "arm,mmu-500"; - reg = <0x0 0x059a0000 0x0 0x10000>; - interrupts = , - , - , - , - , - , - , - , - ; - - clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, - <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, - <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; - clock-names = "mem", - "hlos", - "iface"; - - power-domains = <&gpucc GPU_CX_GDSC>; - - #global-interrupts = <1>; - #iommu-cells = <2>; - }; - - cci: cci@5c1b000 { - compatible = "qcom,qcm2290-cci", "qcom,msm8996-cci"; - reg = <0x0 0x5c1b000 0x0 0x1000>; - - interrupts = ; - - clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, <&gcc GCC_CAMSS_CCI_0_CLK>; - clock-names = "ahb", "cci"; - assigned-clocks = <&gcc GCC_CAMSS_CCI_0_CLK>; - assigned-clock-rates = <37500000>; - - power-domains = <&gcc GCC_CAMSS_TOP_GDSC>; - - pinctrl-0 = <&cci0_default &cci1_default>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - - cci_i2c0: i2c-bus@0 { - reg = <0>; - clock-frequency = <400000>; - #address-cells = <1>; - #size-cells = <0>; - }; - - cci_i2c1: i2c-bus@1 { - reg = <1>; - clock-frequency = <400000>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - camss: camss@5c6e000 { - compatible = "qcom,qcm2290-camss"; - - reg = <0x0 0x5c6e000 0x0 0x1000>, - <0x0 0x5c75000 0x0 0x1000>, - <0x0 0x5c52000 0x0 0x1000>, - <0x0 0x5c53000 0x0 0x1000>, - <0x0 0x5c66000 0x0 0x400>, - <0x0 0x5c68000 0x0 0x400>, - <0x0 0x5c11000 0x0 0x1000>, - <0x0 0x5c6f000 0x0 0x4000>, - <0x0 0x5c76000 0x0 0x4000>; - reg-names = "csid0", - "csid1", - "csiphy0", - "csiphy1", - "csitpg0", - "csitpg1", - "top", - "vfe0", - "vfe1"; - - clocks = <&gcc GCC_CAMERA_AHB_CLK>, - <&gcc GCC_CAMSS_AXI_CLK>, - <&gcc GCC_CAMSS_NRT_AXI_CLK>, - <&gcc GCC_CAMSS_RT_AXI_CLK>, - <&gcc GCC_CAMSS_TFE_0_CSID_CLK>, - <&gcc GCC_CAMSS_TFE_1_CSID_CLK>, - <&gcc GCC_CAMSS_CPHY_0_CLK>, - <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>, - <&gcc GCC_CAMSS_CPHY_1_CLK>, - <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>, - <&gcc GCC_CAMSS_TOP_AHB_CLK>, - <&gcc GCC_CAMSS_TFE_0_CLK>, - <&gcc GCC_CAMSS_TFE_0_CPHY_RX_CLK>, - <&gcc GCC_CAMSS_TFE_1_CLK>, - <&gcc GCC_CAMSS_TFE_1_CPHY_RX_CLK> ; - clock-names = "ahb", - "axi", - "camnoc_nrt_axi", - "camnoc_rt_axi", - "csi0", - "csi1", - "csiphy0", - "csiphy0_timer", - "csiphy1", - "csiphy1_timer", - "top_ahb", - "vfe0", - "vfe0_cphy_rx", - "vfe1", - "vfe1_cphy_rx"; - - interrupts = , - , - , - , - , - , - , - ; - interrupt-names = "csid0", - "csid1", - "csiphy0", - "csiphy1", - "csitpg0", - "csitpg1", - "vfe0", - "vfe1"; - - interconnects = <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG - &config_noc SLAVE_CAMERA_CFG RPM_ACTIVE_TAG>, - <&mmrt_virt MASTER_CAMNOC_HF RPM_ALWAYS_TAG - &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, - <&mmnrt_virt MASTER_CAMNOC_SF RPM_ALWAYS_TAG - &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; - interconnect-names = "ahb", - "hf_mnoc", - "sf_mnoc"; - - iommus = <&apps_smmu 0x400 0x0>, - <&apps_smmu 0x800 0x0>, - <&apps_smmu 0x820 0x0>, - <&apps_smmu 0x840 0x0>; - - power-domains = <&gcc GCC_CAMSS_TOP_GDSC>; - - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - }; - - port@1 { - reg = <1>; - }; - }; - }; - - mdss: display-subsystem@5e00000 { - compatible = "qcom,qcm2290-mdss"; - reg = <0x0 0x05e00000 0x0 0x1000>; - reg-names = "mdss"; - interrupts = ; - interrupt-controller; - #interrupt-cells = <1>; - - clocks = <&gcc GCC_DISP_AHB_CLK>, - <&gcc GCC_DISP_HF_AXI_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>; - clock-names = "iface", - "bus", - "core"; - - resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; - - power-domains = <&dispcc MDSS_GDSC>; - - iommus = <&apps_smmu 0x420 0x2>, - <&apps_smmu 0x421 0x0>; - interconnects = <&mmrt_virt MASTER_MDP0 RPM_ALWAYS_TAG - &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, - <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc SLAVE_DISPLAY_CFG RPM_ALWAYS_TAG>; - interconnect-names = "mdp0-mem", - "cpu-cfg"; - - #address-cells = <2>; - #size-cells = <2>; - ranges; - - status = "disabled"; - - mdp: display-controller@5e01000 { - compatible = "qcom,qcm2290-dpu"; - reg = <0x0 0x05e01000 0x0 0x8f000>, - <0x0 0x05eb0000 0x0 0x3000>; - reg-names = "mdp", - "vbif"; - - interrupt-parent = <&mdss>; - interrupts = <0>; - - clocks = <&gcc GCC_DISP_HF_AXI_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - clock-names = "bus", - "iface", - "core", - "lut", - "vsync"; - - operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmpd QCM2290_VDDCX>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dpu_intf1_out: endpoint { - remote-endpoint = <&mdss_dsi0_in>; - }; - }; - }; - - mdp_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-19200000 { - opp-hz = /bits/ 64 <19200000>; - required-opps = <&rpmpd_opp_min_svs>; - }; - - opp-192000000 { - opp-hz = /bits/ 64 <192000000>; - required-opps = <&rpmpd_opp_low_svs>; - }; - - opp-256000000 { - opp-hz = /bits/ 64 <256000000>; - required-opps = <&rpmpd_opp_svs>; - }; - - opp-307200000 { - opp-hz = /bits/ 64 <307200000>; - required-opps = <&rpmpd_opp_svs_plus>; - }; - - opp-384000000 { - opp-hz = /bits/ 64 <384000000>; - required-opps = <&rpmpd_opp_nom>; - }; - }; - }; - - mdss_dsi0: dsi@5e94000 { - compatible = "qcom,qcm2290-dsi-ctrl", "qcom,mdss-dsi-ctrl"; - reg = <0x0 0x05e94000 0x0 0x400>; - reg-names = "dsi_ctrl"; - - interrupt-parent = <&mdss>; - interrupts = <4>; - - clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, - <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, - <&dispcc DISP_CC_MDSS_PCLK0_CLK>, - <&dispcc DISP_CC_MDSS_ESC0_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&gcc GCC_DISP_HF_AXI_CLK>; - clock-names = "byte", - "byte_intf", - "pixel", - "core", - "iface", - "bus"; - - assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, - <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; - assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, - <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; - - operating-points-v2 = <&dsi_opp_table>; - power-domains = <&rpmpd QCM2290_VDDCX>; - phys = <&mdss_dsi0_phy>; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - - dsi_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-19200000 { - opp-hz = /bits/ 64 <19200000>; - required-opps = <&rpmpd_opp_min_svs>; - }; - - opp-164000000 { - opp-hz = /bits/ 64 <164000000>; - required-opps = <&rpmpd_opp_low_svs>; - }; - - opp-187500000 { - opp-hz = /bits/ 64 <187500000>; - required-opps = <&rpmpd_opp_svs>; - }; - }; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - mdss_dsi0_in: endpoint { - remote-endpoint = <&dpu_intf1_out>; - }; - }; - - port@1 { - reg = <1>; - - mdss_dsi0_out: endpoint { - }; - }; - }; - }; - - mdss_dsi0_phy: phy@5e94400 { - compatible = "qcom,dsi-phy-14nm-2290"; - reg = <0x0 0x05e94400 0x0 0x100>, - <0x0 0x05e94500 0x0 0x300>, - <0x0 0x05e94800 0x0 0x188>; - reg-names = "dsi_phy", - "dsi_phy_lane", - "dsi_pll"; - - clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&rpmcc RPM_SMD_XO_CLK_SRC>; - clock-names = "iface", - "ref"; - - power-domains = <&rpmpd QCM2290_VDDMX>; - required-opps = <&rpmpd_opp_nom>; - - #clock-cells = <1>; - #phy-cells = <0>; - - status = "disabled"; - }; - }; - - dispcc: clock-controller@5f00000 { - compatible = "qcom,qcm2290-dispcc"; - reg = <0x0 0x05f00000 0x0 0x20000>; - clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, - <&rpmcc RPM_SMD_XO_A_CLK_SRC>, - <&gcc GCC_DISP_GPLL0_CLK_SRC>, - <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, - <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, - <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; - clock-names = "bi_tcxo", - "bi_tcxo_ao", - "gcc_disp_gpll0_clk_src", - "gcc_disp_gpll0_div_clk_src", - "dsi0_phy_pll_out_byteclk", - "dsi0_phy_pll_out_dsiclk"; - #power-domain-cells = <1>; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - remoteproc_mpss: remoteproc@6080000 { - compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas"; - reg = <0x0 0x06080000 0x0 0x100>; - - interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", - "fatal", - "ready", - "handover", - "stop-ack", - "shutdown-ack"; - - clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; - clock-names = "xo"; - - power-domains = <&rpmpd QCM2290_VDDCX>; - - memory-region = <&pil_modem_mem>; - - qcom,smem-states = <&modem_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts = ; - label = "mpss"; - qcom,remote-pid = <1>; - mboxes = <&apcs_glb 12>; - }; - }; - - remoteproc_adsp: remoteproc@ab00000 { - compatible = "qcom,qcm2290-adsp-pas", "qcom,sm6115-adsp-pas"; - reg = <0x0 0x0ab00000 0x0 0x100>; - - interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", - "fatal", - "ready", - "handover", - "stop-ack"; - - clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; - clock-names = "xo"; - - power-domains = <&rpmpd QCM2290_VDD_LPI_CX>, - <&rpmpd QCM2290_VDD_LPI_MX>; - - memory-region = <&pil_adsp_mem>; - - qcom,smem-states = <&adsp_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts = ; - label = "lpass"; - qcom,remote-pid = <2>; - mboxes = <&apcs_glb 8>; - }; - }; - - apps_smmu: iommu@c600000 { - compatible = "qcom,qcm2290-smmu-500", "qcom,smmu-500", "arm,mmu-500"; - reg = <0x0 0x0c600000 0x0 0x80000>; - #iommu-cells = <2>; - #global-interrupts = <1>; - - interrupts = , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - ; - }; - - venus: video-codec@5a00000 { - compatible = "qcom,qcm2290-venus"; - reg = <0 0x5a00000 0 0xf0000>; - interrupts = ; - - power-domains = <&gcc GCC_VENUS_GDSC>, - <&gcc GCC_VCODEC0_GDSC>, - <&rpmpd QCM2290_VDDCX>; - power-domain-names = "venus", - "vcodec0", - "cx"; - operating-points-v2 = <&venus_opp_table>; - - clocks = <&gcc GCC_VIDEO_VENUS_CTL_CLK>, - <&gcc GCC_VIDEO_AHB_CLK>, - <&gcc GCC_VENUS_CTL_AXI_CLK>, - <&gcc GCC_VIDEO_THROTTLE_CORE_CLK>, - <&gcc GCC_VIDEO_VCODEC0_SYS_CLK>, - <&gcc GCC_VCODEC0_AXI_CLK>; - clock-names = "core", - "iface", - "bus", - "throttle", - "vcodec0_core", - "vcodec0_bus"; - - memory-region = <&pil_video_mem>; - iommus = <&apps_smmu 0x860 0x0>, - <&apps_smmu 0x880 0x0>, - <&apps_smmu 0x861 0x04>, - <&apps_smmu 0x863 0x0>, - <&apps_smmu 0x804 0xe0>; - - interconnects = <&mmnrt_virt MASTER_VIDEO_P0 RPM_ALWAYS_TAG - &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, - <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG - &config_noc SLAVE_VENUS_CFG RPM_ACTIVE_TAG>; - interconnect-names = "video-mem", - "cpu-cfg"; - - venus_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-133333333 { - opp-hz = /bits/ 64 <133333333>; - required-opps = <&rpmpd_opp_low_svs>; - }; - - opp-240000000 { - opp-hz = /bits/ 64 <240000000>; - required-opps = <&rpmpd_opp_svs>; - }; - }; - }; - - wifi: wifi@c800000 { - compatible = "qcom,wcn3990-wifi"; - reg = <0x0 0x0c800000 0x0 0x800000>; - reg-names = "membase"; - memory-region = <&wlan_msa_mem>; - interrupts = , - , - , - , - , - , - , - , - , - , - , - ; - iommus = <&apps_smmu 0x1a0 0x1>; - qcom,msa-fixed-perm; - status = "disabled"; - }; - - watchdog@f017000 { - compatible = "qcom,apss-wdt-qcm2290", "qcom,kpss-wdt"; - reg = <0x0 0x0f017000 0x0 0x1000>; - interrupts = , - ; - clocks = <&sleep_clk>; - }; - - apcs_glb: mailbox@f111000 { - compatible = "qcom,qcm2290-apcs-hmss-global"; - reg = <0x0 0x0f111000 0x0 0x1000>; - #mbox-cells = <1>; - }; - - timer@f120000 { - compatible = "arm,armv7-timer-mem"; - reg = <0x0 0x0f120000 0x0 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x0 0x0f121000 0x8000>; - - frame@0 { - reg = <0x0 0x1000>, - <0x1000 0x1000>; - interrupts = , - ; - frame-number = <0>; - }; - - frame@2000 { - reg = <0x2000 0x1000>; - interrupts = ; - frame-number = <1>; - status = "disabled"; - }; - - frame@3000 { - reg = <0x3000 0x1000>; - interrupts = ; - frame-number = <2>; - status = "disabled"; - }; - - frame@4000 { - reg = <0x4000 0x1000>; - interrupts = ; - frame-number = <3>; - status = "disabled"; - }; - - frame@5000 { - reg = <0x5000 0x1000>; - interrupts = ; - frame-number = <4>; - status = "disabled"; - }; - - frame@6000 { - reg = <0x6000 0x1000>; - interrupts = ; - frame-number = <5>; - status = "disabled"; - }; - - frame@7000 { - reg = <0x7000 0x1000>; - interrupts = ; - frame-number = <6>; - status = "disabled"; - }; - }; - - intc: interrupt-controller@f200000 { - compatible = "arm,gic-v3"; - reg = <0x0 0x0f200000 0x0 0x10000>, - <0x0 0x0f300000 0x0 0x100000>; - interrupts = ; - #interrupt-cells = <3>; - interrupt-controller; - interrupt-parent = <&intc>; - #redistributor-regions = <1>; - redistributor-stride = <0x0 0x20000>; - }; - - cpufreq_hw: cpufreq@f521000 { - compatible = "qcom,qcm2290-cpufreq-hw", "qcom,cpufreq-hw"; - reg = <0x0 0x0f521000 0x0 0x1000>; - reg-names = "freq-domain0"; - interrupts-extended = <&lmh_cluster 0>; - interrupt-names = "dcvsh-irq-0"; - clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>; - clock-names = "xo", "alternate"; - - #freq-domain-cells = <1>; - #clock-cells = <1>; - }; - - lmh_cluster: lmh@f550800 { - compatible = "qcom,qcm2290-lmh", "qcom,sm8150-lmh"; - reg = <0x0 0x0f550800 0x0 0x400>; - interrupts = ; - cpus = <&cpu0>; - qcom,lmh-temp-arm-millicelsius = <65000>; - qcom,lmh-temp-low-millicelsius = <94500>; - qcom,lmh-temp-high-millicelsius = <95000>; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; - - thermal-zones { - mapss-thermal { - thermal-sensors = <&tsens0 0>; - - trips { - mapss_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - mapss_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - mapss_crit: mapss-crit { - temperature = <110000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - video-thermal { - thermal-sensors = <&tsens0 1>; - - trips { - video_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - video_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - video_crit: video-crit { - temperature = <110000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - wlan-thermal { - thermal-sensors = <&tsens0 2>; - - trips { - wlan_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - wlan_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - wlan_crit: wlan-crit { - temperature = <110000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpuss0-thermal { - thermal-sensors = <&tsens0 3>; - - trips { - cpuss0_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpuss0_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpuss0_crit: cpuss0-crit { - temperature = <110000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpuss1-thermal { - thermal-sensors = <&tsens0 4>; - - trips { - cpuss1_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpuss1_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpuss1_crit: cpuss1-crit { - temperature = <110000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - mdm0-thermal { - thermal-sensors = <&tsens0 5>; - - trips { - mdm0_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - mdm0_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - mdm0_crit: mdm0-crit { - temperature = <110000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - mdm1-thermal { - thermal-sensors = <&tsens0 6>; - - trips { - mdm1_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - mdm1_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - mdm1_crit: mdm1-crit { - temperature = <110000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - gpu-thermal { - thermal-sensors = <&tsens0 7>; - - trips { - gpu_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - gpu_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - gpu_crit: gpu-crit { - temperature = <110000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - hm-center-thermal { - thermal-sensors = <&tsens0 8>; - - trips { - hm_center_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - hm_center_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - hm_center_crit: hm-center-crit { - temperature = <110000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - camera-thermal { - thermal-sensors = <&tsens0 9>; - - trips { - camera_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - camera_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - camera_crit: camera-crit { - temperature = <110000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = , - , - , - ; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts index 519e458e1a8908..455e5c9bb072a4 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts @@ -16,7 +16,7 @@ #include #include #include -#include "sc7280.dtsi" +#include "kodiak.dtsi" #include "pm7250b.dtsi" #include "pm7325.dtsi" #include "pm8350c.dtsi" /* PM7350C */ @@ -47,6 +47,8 @@ framebuffer0: framebuffer@a000000 { stride = <(1224 * 4)>; format = "a8r8g8b8"; clocks = <&gcc GCC_DISP_HF_AXI_CLK>; + vci-supply = <&vreg_oled_vci>; + dvdd-supply = <&vreg_oled_dvdd>; }; }; @@ -193,6 +195,19 @@ vreg_usb_redrive_1v8: regulator-usb-redrive-1v8 { pinctrl-names = "default"; }; + vreg_vtof_ldo_2p8: regulator-vtof-ldo-2p8 { + compatible = "regulator-fixed"; + regulator-name = "VTOF_LDO_2P8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <233>; + + gpio = <&tlmm 141 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vreg_bob>; + }; + reserved-memory { cont_splash_mem: cont-splash@e1000000 { reg = <0x0 0xe1000000 0x0 0x2300000>; @@ -627,6 +642,15 @@ eeprom@50 { }; &cci0_i2c1 { + camera_imx858_dw9800k: actuator@e { + compatible = "dongwoon,dw9800k"; + reg = <0x0e>; + vdd-supply = <&vreg_afvdd_2p8>; + + dongwoon,sac-mode = <1>; + dongwoon,vcm-prescale = <16>; + }; + /* IMX858 @ 29 */ eeprom@54 { @@ -749,6 +773,8 @@ vreg_l6p: ldo6 { regulator-name = "vreg_l6p"; regulator-min-microvolt = <1700000>; regulator-max-microvolt = <1904000>; + /* Pull-up for CCI I2C busses */ + regulator-always-on; }; vreg_l7p: ldo7 { @@ -780,7 +806,16 @@ ocp96011_sbu_mux: endpoint { }; }; - /* AW86927FCR haptics @ 5a */ + vibrator@5a { + compatible = "awinic,aw86927"; + reg = <0x5a>; + + interrupts-extended = <&tlmm 101 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&aw86927_int_default>; + pinctrl-names = "default"; + }; }; &i2c2 { @@ -839,6 +874,11 @@ &ipa { status = "okay"; }; +&lpass_audiocc { + compatible = "qcom,qcm6490-lpassaudiocc"; + /delete-property/ power-domains; +}; + &mdss { status = "okay"; }; @@ -1318,6 +1358,13 @@ usb_redrive_1v8_en_default: usb-redrive-1v8-en-default-state { bias-disable; output-high; }; + + aw86927_int_default: aw86927-int-default-state { + pins = "gpio101"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; &uart5 { diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts index 73fce639370cd3..089a027c57d5ca 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts @@ -13,7 +13,7 @@ #include #include #include -#include "sc7280.dtsi" +#include "kodiak.dtsi" #include "pm7250b.dtsi" #include "pm7325.dtsi" #include "pm8350c.dtsi" diff --git a/arch/arm64/boot/dts/qcom/qcm6490-particle-tachyon.dts b/arch/arm64/boot/dts/qcom/qcm6490-particle-tachyon.dts index 251e72f1142877..bf18c485208137 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-particle-tachyon.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-particle-tachyon.dts @@ -11,7 +11,7 @@ #include #include #include -#include "sc7280.dtsi" +#include "kodiak.dtsi" #include "pm8350c.dtsi" #include "pmk8350.dtsi" diff --git a/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts index eb8efba1b9dda4..797f37596bf197 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts @@ -14,7 +14,7 @@ #include #include #include -#include "sc7280.dtsi" +#include "kodiak.dtsi" #include "pm7250b.dtsi" #include "pm7325.dtsi" #include "pm8350c.dtsi" /* PM7350C */ @@ -118,6 +118,11 @@ cdsp_mem: cdsp@88f00000 { no-map; }; + removed_mem: removed@c0000000 { + reg = <0x0 0xc0000000 0x0 0x5100000>; + no-map; + }; + rmtfs_mem: rmtfs@f8500000 { compatible = "qcom,rmtfs-mem"; reg = <0x0 0xf8500000 0x0 0x600000>; @@ -130,8 +135,6 @@ rmtfs_mem: rmtfs@f8500000 { thermal-zones { camera-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pmk8350_adc_tm 2>; trips { @@ -144,8 +147,6 @@ active-config0 { }; chg-skin-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm7250b_adc_tm 0>; trips { @@ -158,8 +159,6 @@ active-config0 { }; conn-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pm7250b_adc_tm 1>; trips { @@ -172,8 +171,6 @@ active-config0 { }; quiet-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pmk8350_adc_tm 1>; trips { @@ -186,8 +183,6 @@ active-config0 { }; rear-cam-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pmk8350_adc_tm 4>; trips { @@ -200,8 +195,6 @@ active-config0 { }; sdm-skin-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pmk8350_adc_tm 3>; trips { @@ -214,8 +207,6 @@ active-config0 { }; xo-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; thermal-sensors = <&pmk8350_adc_tm 0>; trips { @@ -568,6 +559,11 @@ &ipa { status = "okay"; }; +&lpass_audiocc { + compatible = "qcom,qcm6490-lpassaudiocc"; + /delete-property/ power-domains; +}; + &pm7250b_adc { channel@4d { reg = ; @@ -614,6 +610,46 @@ volume_down_default: volume-down-default-state { }; }; +&pm8350c_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = ; + led-sources = <1>, <2>; + led-max-microamp = <500000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <1280000>; + }; +}; + +&pm8350c_pwm { + status = "okay"; + + multi-led { + color = ; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = ; + }; + + led@2 { + reg = <2>; + color = ; + }; + + led@3 { + reg = <3>; + color = ; + }; + }; +}; + &pmk8350_adc_tm { status = "okay"; @@ -857,7 +893,7 @@ &uart5 { &uart7 { /delete-property/interrupts; interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>, - <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; + <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>; pinctrl-names = "default", "sleep"; @@ -920,10 +956,6 @@ &usb_1_dwc3_hs { remote-endpoint = <&pmic_glink_hs_in>; }; -&usb_dp_qmpphy_out { - remote-endpoint = <&pmic_glink_ss_in>; -}; - &usb_1_hsphy { vdda-pll-supply = <&vreg_l10c>; vdda18-supply = <&vreg_l1c>; @@ -950,6 +982,16 @@ &usb_1_qmpphy { status = "okay"; }; +&usb_dp_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&venus { + firmware-name = "qcom/qcm6490/SHIFT/otter/venus.mbn"; + + status = "okay"; +}; + &wifi { qcom,calibration-variant = "SHIFTphone_8"; diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts index 705ea71b07a10a..be67eb173046f9 100644 --- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts +++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts @@ -7,10 +7,10 @@ #include #include #include -#include "sm6150.dtsi" +#include "talos.dtsi" #include "pm8150.dtsi" / { - model = "Qualcomm Technologies, Inc. QCS615 Ride"; + model = "Qualcomm Technologies, Inc. QCS615 Ride (IQ-615 Beta EVK)"; compatible = "qcom,qcs615-ride", "qcom,qcs615", "qcom,sm6150"; chassis-type = "embedded"; @@ -39,6 +39,18 @@ xo_board_clk: xo-board-clk { }; }; + dp-dsi0-connector { + compatible = "dp-connector"; + label = "DSI0"; + type = "mini"; + + port { + dp_dsi0_connector_in: endpoint { + remote-endpoint = <&dsi2dp_bridge_out>; + }; + }; + }; + vreg_conn_1p8: regulator-conn-1p8 { compatible = "regulator-fixed"; regulator-name = "vreg_conn_1p8"; @@ -65,6 +77,64 @@ regulator-usb2-vbus { regulator-always-on; }; + vreg_12p0: regulator-vreg-12p0 { + compatible = "regulator-fixed"; + regulator-name = "VREG_12P0"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vreg_1p0: regulator-vreg-1p0 { + compatible = "regulator-fixed"; + regulator-name = "VREG_1P0"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + + vin-supply = <&vreg_1p8>; + }; + + vreg_1p8: regulator-vreg-1p8 { + compatible = "regulator-fixed"; + regulator-name = "VREG_1P8"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + vin-supply = <&vreg_5p0>; + }; + + vreg_3p0: regulator-vreg-3p0 { + compatible = "regulator-fixed"; + regulator-name = "VREG_3P0"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + vin-supply = <&vreg_12p0>; + }; + + vreg_5p0: regulator-vreg-5p0 { + compatible = "regulator-fixed"; + regulator-name = "VREG_5P0"; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&vreg_12p0>; + }; + wcn6855-pmu { compatible = "qcom,wcn6855-pmu"; @@ -288,6 +358,86 @@ vreg_l17a: ldo17 { }; }; +&i2c2 { + clock-frequency = <400000>; + status = "okay"; + + io_expander: pinctrl@3e { + compatible = "semtech,sx1509q"; + reg = <0x3e>; + interrupts-extended = <&tlmm 58 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + semtech,probe-reset; + }; + + i2c-mux@77 { + compatible = "nxp,pca9542"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + bridge@58 { + compatible = "analogix,anx7625"; + reg = <0x58>; + interrupts-extended = <&io_expander 0 IRQ_TYPE_EDGE_FALLING>; + enable-gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; + vdd10-supply = <&vreg_1p0>; + vdd18-supply = <&vreg_1p8>; + vdd33-supply = <&vreg_3p0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsi2dp_bridge_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + + dsi2dp_bridge_out: endpoint { + remote-endpoint = <&dp_dsi0_connector_in>; + }; + }; + }; + }; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l11a>; + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <&dsi2dp_bridge_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vcca-supply = <&vreg_l5a>; + status = "okay"; +}; + &pcie { perst-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>; @@ -398,6 +548,7 @@ wlan_en_state: wlan-en-state { pins = "gpio98"; function = "gpio"; bias-pull-down; + drive-strength = <16>; output-low; }; }; diff --git a/arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dts b/arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dts new file mode 100644 index 00000000000000..bb5a42b038f19b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs6490-radxa-dragon-q6a.dts @@ -0,0 +1,1095 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2025 Radxa Computer (Shenzhen) Co., Ltd. + */ + +/dts-v1/; + +/* PM7250B is configured to use SID8/9 */ +#define PM7250B_SID 8 +#define PM7250B_SID1 9 + +#include +#include +#include +#include +#include +#include "kodiak.dtsi" +#include "pm7250b.dtsi" +#include "pm7325.dtsi" +#include "pm8350c.dtsi" /* PM7350C */ +#include "pmk8350.dtsi" /* PMK7325 */ +#include "qcs6490-audioreach.dtsi" + +/delete-node/ &adsp_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &mpss_mem; +/delete-node/ &remoteproc_mpss; +/delete-node/ &remoteproc_wpss; +/delete-node/ &rmtfs_mem; +/delete-node/ &video_mem; +/delete-node/ &wifi; +/delete-node/ &wlan_ce_mem; +/delete-node/ &wlan_fw_mem; +/delete-node/ &wpss_mem; +/delete-node/ &xbl_mem; + +/ { + model = "Radxa Dragon Q6A"; + compatible = "radxa,dragon-q6a", "qcom,qcm6490"; + chassis-type = "embedded"; + + aliases { + mmc0 = &sdhc_1; + mmc1 = &sdhc_2; + serial0 = &uart5; + }; + + wcd938x: audio-codec { + compatible = "qcom,wcd9380-codec"; + + pinctrl-0 = <&wcd_default>; + pinctrl-names = "default"; + + reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>; + + vdd-rxtx-supply = <&vreg_l18b_1p8>; + vdd-io-supply = <&vreg_l18b_1p8>; + vdd-buck-supply = <&vreg_l17b_1p8>; + vdd-mic-bias-supply = <&vreg_bob_3p296>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + qcom,hphl-jack-type-normally-closed; + + #sound-dai-cells = <1>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + usb2_1_con: connector-0 { + compatible = "usb-a-connector"; + vbus-supply = <&vcc_5v_peri>; + + port { + usb2_1_connector: endpoint { + remote-endpoint = <&usb_hub_2_1>; + }; + }; + }; + + usb2_2_con: connector-1 { + compatible = "usb-a-connector"; + vbus-supply = <&vcc_5v_peri>; + + port { + usb2_2_connector: endpoint { + remote-endpoint = <&usb_hub_2_2>; + }; + }; + }; + + usb2_3_con: connector-2 { + compatible = "usb-a-connector"; + vbus-supply = <&vcc_5v_peri>; + + port { + usb2_3_connector: endpoint { + remote-endpoint = <&usb_hub_2_3>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-0 = <&user_led>; + pinctrl-names = "default"; + + user-led { + color = ; + function = LED_FUNCTION_INDICATOR; + gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + panic-indicator; + }; + }; + + reserved-memory { + xbl_mem: xbl@80700000 { + reg = <0x0 0x80700000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap_mem: cdsp-secure-heap@81800000 { + reg = <0x0 0x81800000 0x0 0x1e00000>; + no-map; + }; + + camera_mem: camera@84300000 { + reg = <0x0 0x84300000 0x0 0x500000>; + no-map; + }; + + adsp_mem: adsp@84800000 { + reg = <0x0 0x84800000 0x0 0x2800000>; + no-map; + }; + + cdsp_mem: cdsp@87000000 { + reg = <0x0 0x87000000 0x0 0x1e00000>; + no-map; + }; + + video_mem: video@88e00000 { + reg = <0x0 0x88e00000 0x0 0x700000>; + no-map; + }; + + cvp_mem: cvp@89500000 { + reg = <0x0 0x89500000 0x0 0x500000>; + no-map; + }; + + gpu_microcode_mem: gpu-microcode@89a00000 { + reg = <0x0 0x89a00000 0x0 0x2000>; + no-map; + }; + + tz_stat_mem: tz-stat@c0000000 { + reg = <0x0 0xc0000000 0x0 0x100000>; + no-map; + }; + + tags_mem: tags@c0100000 { + reg = <0x0 0xc0100000 0x0 0x1200000>; + no-map; + }; + + qtee_mem: qtee@c1300000 { + reg = <0x0 0xc1300000 0x0 0x500000>; + no-map; + }; + + trusted_apps_mem: trusted-apps@c1800000 { + reg = <0x0 0xc1800000 0x0 0x1c00000>; + no-map; + }; + + debug_vm_mem: debug-vm@d0600000 { + reg = <0x0 0xd0600000 0x0 0x100000>; + no-map; + }; + }; + + thermal-zones { + msm-skin-thermal { + polling-delay-passive = <0>; + thermal-sensors = <&pmk8350_adc_tm 2>; + }; + + quiet-thermal { + polling-delay-passive = <0>; + thermal-sensors = <&pmk8350_adc_tm 1>; + }; + + ufs-thermal { + polling-delay-passive = <0>; + thermal-sensors = <&pmk8350_adc_tm 3>; + }; + + xo-thermal { + polling-delay-passive = <0>; + thermal-sensors = <&pmk8350_adc_tm 0>; + }; + }; + + vcc_1v8: regulator-vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_5v_peri>; + + regulator-boot-on; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_5v_peri>; + + regulator-boot-on; + regulator-always-on; + }; + + vcc_5v_peri: regulator-vcc-5v-peri { + compatible = "regulator-fixed"; + regulator-name = "vcc_5v_peri"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vph_pwr>; + + regulator-boot-on; + regulator-always-on; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-boot-on; + regulator-always-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm7325-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p536>; + vdd-l2-l7-supply = <&vreg_bob_3p296>; + vdd-l6-l9-l10-supply = <&vreg_s8b_1p2>; + vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p84>; + + vreg_s1b_1p84: smps1 { + regulator-name = "vreg_s1b_1p84"; + regulator-min-microvolt = <1840000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7b_0p536: smps7 { + regulator-name = "vreg_s7b_0p536"; + regulator-min-microvolt = <536000>; + regulator-max-microvolt = <1120000>; + }; + + vreg_s8b_1p2: smps8 { + regulator-name = "vreg_s8b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1496000>; + regulator-initial-mode = ; + }; + + vreg_l1b_0p912: ldo1 { + regulator-name = "vreg_l1b_0p912"; + regulator-min-microvolt = <832000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l2b_3p072: ldo2 { + regulator-name = "vreg_l2b_3p072"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l6b_1p2: ldo6 { + regulator-name = "vreg_l6b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l7b_2p96: ldo7 { + regulator-name = "vreg_l7b_2p96"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l9b_1p2: ldo9 { + regulator-name = "vreg_l9b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l17b_1p8: ldo17 { + regulator-name = "vreg_l17b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1896000>; + regulator-initial-mode = ; + }; + + vreg_l18b_1p8: ldo18 { + regulator-name = "vreg_l18b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_l19b_1p8: ldo19 { + regulator-name = "vreg_l19b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + }; + + regulators-1 { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-l1-l12-supply = <&vreg_s1b_1p84>; + vdd-l6-l9-l11-supply = <&vreg_bob_3p296>; + vdd-l10-supply = <&vreg_s7b_0p536>; + vdd-bob-supply = <&vph_pwr>; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1976000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l6c_2p96: ldo6 { + regulator-name = "vreg_l6c_2p96"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l9c_2p96: ldo9 { + regulator-name = "vreg_l9c_2p96"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l10c_0p88: ldo10 { + regulator-name = "vreg_l10c_0p88"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1048000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_bob_3p296: bob { + regulator-name = "vreg_bob_3p296"; + regulator-min-microvolt = <3032000>; + regulator-max-microvolt = <3960000>; + }; + }; +}; + +&gcc { + protected-clocks = , + , + , + , + , + , + , + , + , + , + ; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/qcs6490/a660_zap.mbn"; +}; + +/* Pin 13, 15 in GPIO header */ +&i2c0 { + qcom,enable-gsi-dma; + status = "okay"; +}; + +/* Pin 27, 28 in GPIO header */ +&i2c2 { + qcom,enable-gsi-dma; + status = "okay"; +}; + +/* Pin 3, 5 in GPIO header */ +&i2c6 { + qcom,enable-gsi-dma; + status = "okay"; +}; + +&i2c10 { + qcom,enable-gsi-dma; + status = "okay"; + + rtc: rtc@68 { + compatible = "st,m41t11"; + reg = <0x68>; + }; +}; + +/* External touchscreen */ +&i2c13 { + qcom,enable-gsi-dma; + status = "okay"; +}; + +&lpass_audiocc { + compatible = "qcom,qcm6490-lpassaudiocc"; + /delete-property/ power-domains; +}; + +&lpass_rx_macro { + status = "okay"; +}; + +&lpass_tx_macro { + status = "okay"; +}; + +&lpass_va_macro { + status = "okay"; +}; + +&pcie0 { + perst-gpios = <&tlmm 87 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&pcie0_clkreq_n>, <&pcie0_reset_n>, <&pcie0_wake_n>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l10c_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + status = "okay"; +}; + +&pcie1 { + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&pcie1_clkreq_n>, <&pcie1_reset_n>, <&pcie1_wake_n>; + pinctrl-names = "default"; + + /* Support for QPS615 PCIe switch */ + iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, + <0x100 &apps_smmu 0x1c81 0x1>, + <0x208 &apps_smmu 0x1c84 0x1>, + <0x210 &apps_smmu 0x1c85 0x1>, + <0x218 &apps_smmu 0x1c86 0x1>, + <0x300 &apps_smmu 0x1c87 0x1>, + <0x400 &apps_smmu 0x1c88 0x1>, + <0x500 &apps_smmu 0x1c89 0x1>, + <0x501 &apps_smmu 0x1c90 0x1>; + + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l10c_0p88>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + status = "okay"; +}; + +&pm7325_gpios { + pm7325_adc_default: adc-default-state { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-high-impedance; + }; +}; + +&pm7325_temp_alarm { + io-channels = <&pmk8350_vadc PM7325_ADC7_DIE_TEMP>; + io-channel-names = "thermal"; +}; + +&pmk8350_adc_tm { + status = "okay"; + + xo-therm@0 { + reg = <0>; + io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + quiet-therm@1 { + reg = <1>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + msm-skin-therm@2 { + reg = <2>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + ufs-therm@3 { + reg = <3>; + io-channels = <&pmk8350_vadc PM7325_ADC7_GPIO1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pmk8350_vadc { + pinctrl-0 = <&pm7325_adc_default>; + pinctrl-names = "default"; + + channel@3 { + reg = ; + label = "pmk7325_die_temp"; + qcom,pre-scaling = <1 1>; + }; + + channel@44 { + reg = ; + label = "xo_therm"; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + qcom,ratiometric; + }; + + channel@103 { + reg = ; + label = "pm7325_die_temp"; + qcom,pre-scaling = <1 1>; + }; + + channel@144 { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "quiet_therm"; + }; + + channel@146 { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "msm_skin_therm"; + }; + + channel@14a { + /* According to datasheet, 0x4a = AMUX1_GPIO = GPIO_02 */ + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "ufs_therm"; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&qspi { + /* It's not possible to use QSPI with iommu */ + /* due to an error in qcom_smmu_write_s2cr */ + /delete-property/ iommus; + + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, + <&qspi_data1>, <&qspi_data23>; + pinctrl-1 = <&qspi_sleep>; + pinctrl-names = "default", "sleep"; + + status = "okay"; + + spi_flash: flash@0 { + compatible = "winbond,w25q256", "jedec,spi-nor"; + reg = <0>; + + spi-max-frequency = <104000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; +}; + +&qupv3_id_0 { + firmware-name = "qcom/qcm6490/qupv3fw.elf"; + status = "okay"; +}; + +&qupv3_id_1 { + firmware-name = "qcom/qcm6490/qupv3fw.elf"; + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/qcs6490/radxa/dragon-q6a/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/qcs6490/cdsp.mbn"; + status = "okay"; +}; + +&sdhc_1 { + non-removable; + no-sd; + no-sdio; + + vmmc-supply = <&vreg_l7b_2p96>; + vqmmc-supply = <&vreg_l19b_1p8>; + + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>; + pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>; + + vmmc-supply = <&vreg_l9c_2p96>; + vqmmc-supply = <&vreg_l6c_2p96>; + + cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&sound { + compatible = "qcom,qcs6490-rb3gen2-sndcard"; + model = "QCS6490-Radxa-Dragon-Q6A"; + + audio-routing = "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "TX SWR_ADC1", "ADC2_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + codec { + sound-dai = <&wcd938x 0>, <&swr0 0>, <&lpass_rx_macro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + codec { + sound-dai = <&wcd938x 1>, <&swr1 0>, <&lpass_tx_macro 0>; + }; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; +}; + +/* Pin 11, 29, 31, 32 in GPIO header */ +&spi7 { + qcom,enable-gsi-dma; + status = "okay"; +}; + +/* Pin 19, 21, 23, 24, 26 in GPIO header */ +&spi12 { + qcom,enable-gsi-dma; + status = "okay"; +}; + +/* Pin 22, 33, 36, 37 in GPIO header */ +&spi14 { + qcom,enable-gsi-dma; + status = "okay"; +}; + +&swr0 { + status = "okay"; + + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr1 { + status = "okay"; + + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <1 1 2 3>; + }; +}; + +&tlmm { + gpio-line-names = + /* GPIO_0 ~ GPIO_3 */ + "PIN_13", "PIN_15", "", "", + /* GPIO_4 ~ GPIO_7 */ + "", "", "", "", + /* GPIO_8 ~ GPIO_11 */ + "PIN_27", "PIN_28", "", "", + /* GPIO_12 ~ GPIO_15 */ + "", "", "", "", + /* GPIO_16 ~ GPIO_19 */ + "", "", "", "", + /* GPIO_20 ~ GPIO_23 */ + "", "", "PIN_8", "PIN_10", + /* GPIO_24 ~ GPIO_27 */ + "PIN_3", "PIN_5", "PIN_16", "PIN_27", + /* GPIO_28 ~ GPIO_31 */ + "PIN_31", "PIN_11", "PIN_32", "PIN_29", + /* GPIO_32 ~ GPIO_35 */ + "", "", "", "", + /* GPIO_36 ~ GPIO_39 */ + "", "", "", "", + /* GPIO_40 ~ GPIO_43 */ + "", "", "", "", + /* GPIO_44 ~ GPIO_47 */ + "", "", "", "", + /* GPIO_48 ~ GPIO_51 */ + "PIN_21", "PIN_19", "PIN_23", "PIN_24", + /* GPIO_52 ~ GPIO_55 */ + "", "", "", "PIN_26", + /* GPIO_56 ~ GPIO_59 */ + "PIN_33", "PIN_22", "PIN_37", "PIN_36", + /* GPIO_60 ~ GPIO_63 */ + "", "", "", "", + /* GPIO_64 ~ GPIO_67 */ + "", "", "", "", + /* GPIO_68 ~ GPIO_71 */ + "", "", "", "", + /* GPIO_72 ~ GPIO_75 */ + "", "", "", "", + /* GPIO_76 ~ GPIO_79 */ + "", "", "", "", + /* GPIO_80 ~ GPIO_83 */ + "", "", "", "", + /* GPIO_84 ~ GPIO_87 */ + "", "", "", "", + /* GPIO_88 ~ GPIO_91 */ + "", "", "", "", + /* GPIO_92 ~ GPIO_95 */ + "", "", "", "", + /* GPIO_96 ~ GPIO_99 */ + "PIN_7", "PIN_12", "PIN_38", "PIN_40", + /* GPIO_100 ~ GPIO_103 */ + "PIN_35", "", "", "", + /* GPIO_104 ~ GPIO_107 */ + "", "", "", "", + /* GPIO_108 ~ GPIO_111 */ + "", "", "", "", + /* GPIO_112 ~ GPIO_115 */ + "", "", "", "", + /* GPIO_116 ~ GPIO_119 */ + "", "", "", "", + /* GPIO_120 ~ GPIO_123 */ + "", "", "", "", + /* GPIO_124 ~ GPIO_127 */ + "", "", "", "", + /* GPIO_128 ~ GPIO_131 */ + "", "", "", "", + /* GPIO_132 ~ GPIO_135 */ + "", "", "", "", + /* GPIO_136 ~ GPIO_139 */ + "", "", "", "", + /* GPIO_140 ~ GPIO_143 */ + "", "", "", "", + /* GPIO_144 ~ GPIO_147 */ + "", "", "", "", + /* GPIO_148 ~ GPIO_151 */ + "", "", "", "", + /* GPIO_152 ~ GPIO_155 */ + "", "", "", "", + /* GPIO_156 ~ GPIO_159 */ + "", "", "", "", + /* GPIO_160 ~ GPIO_163 */ + "", "", "", "", + /* GPIO_164 ~ GPIO_167 */ + "", "", "", "", + /* GPIO_168 ~ GPIO_171 */ + "", "", "", "", + /* GPIO_172 ~ GPIO_174 */ + "", "", ""; + + pcie0_reset_n: pcie0-reset-n-state { + pins = "gpio87"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie0_wake_n: pcie0-wake-n-state { + pins = "gpio89"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + pcie1_reset_n: pcie1-reset-n-state { + pins = "gpio2"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie1_wake_n: pcie1-wake-n-state { + pins = "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + qspi_sleep: qspi-sleep-state { + pins = "gpio12", "gpio13", "gpio14", "gpio15", "gpio16", "gpio17"; + function = "gpio"; + output-disable; + }; + + sd_cd: sd-cd-state { + pins = "gpio91"; + function = "gpio"; + bias-pull-up; + }; + + user_led: user-led-state { + pins = "gpio42"; + function = "gpio"; + bias-pull-up; + }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio83"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&uart5 { + status = "okay"; +}; + +&usb_2 { + dr_mode = "host"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "okay"; + + /* Onboard USB 2.0 hub */ + usb_hub_2_x: hub@1 { + compatible = "usb1a40,0101"; + reg = <1>; + vdd-supply = <&vcc_5v_peri>; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + usb_hub_2_1: endpoint { + remote-endpoint = <&usb2_1_connector>; + }; + }; + + port@2 { + reg = <2>; + + usb_hub_2_2: endpoint { + remote-endpoint = <&usb2_2_connector>; + }; + }; + + port@3 { + reg = <3>; + + usb_hub_2_3: endpoint { + remote-endpoint = <&usb2_3_connector>; + }; + }; + }; + + /* FCU760K Wi-Fi & Bluetooth module */ + wifi@4 { + compatible = "usba69c,8d80"; + reg = <4>; + }; + }; +}; + +&usb_2_hsphy { + vdda-pll-supply = <&vreg_l10c_0p88>; + vdda33-supply = <&vreg_l2b_3p072>; + vdda18-supply = <&vreg_l1c_1p8>; + + status = "okay"; +}; + +&venus { + status = "okay"; +}; + +/* PINCTRL - additions to nodes defined in sc7280.dtsi */ +&pcie0_clkreq_n { + bias-pull-up; + drive-strength = <2>; +}; + +&pcie1_clkreq_n { + bias-pull-up; + drive-strength = <2>; +}; + +&qspi_clk { + bias-disable; + drive-strength = <16>; +}; + +&qspi_cs0 { + bias-disable; + drive-strength = <8>; +}; + +&qspi_data0 { + bias-disable; + drive-strength = <8>; +}; + +&qspi_data1 { + bias-disable; + drive-strength = <8>; +}; + +&qspi_data23 { + bias-disable; + drive-strength = <8>; +}; + +&sdc1_clk { + bias-disable; + drive-strength = <16>; +}; + +&sdc1_cmd { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc1_data { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc1_rclk { + bias-pull-down; +}; + +&sdc2_clk { + bias-disable; + drive-strength = <16>; +}; + +&sdc2_cmd { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc2_data { + bias-pull-up; + drive-strength = <10>; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts index 18cea881200142..f29a352b0288e9 100644 --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts @@ -14,7 +14,7 @@ #include #include #include -#include "sc7280.dtsi" +#include "kodiak.dtsi" #include "pm7250b.dtsi" #include "pm7325.dtsi" #include "pm8350c.dtsi" @@ -217,6 +217,13 @@ pmic_glink_sbu_in: endpoint { }; }; + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + thermal-zones { sdm-skin-thermal { thermal-sensors = <&pmk8350_adc_tm 3>; @@ -255,13 +262,6 @@ active-config0 { }; }; - vph_pwr: vph-pwr-regulator { - compatible = "regulator-fixed"; - regulator-name = "vph_pwr"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - }; - wcn6750-pmu { compatible = "qcom,wcn6750-pmu"; pinctrl-0 = <&bt_en>; @@ -335,8 +335,6 @@ regulators-0 { vdd-s8-supply = <&vph_pwr>; vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>; vdd-l2-l7-supply = <&vreg_bob_3p296>; - vdd-l3-supply = <&vreg_s2b_0p876>; - vdd-l5-supply = <&vreg_s2b_0p876>; vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>; vdd-l8-supply = <&vreg_s7b_0p972>; vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>; @@ -349,12 +347,6 @@ vreg_s1b_1p872: smps1 { regulator-max-microvolt = <2040000>; }; - vreg_s2b_0p876: smps2 { - regulator-name = "vreg_s2b_0p876"; - regulator-min-microvolt = <570070>; - regulator-max-microvolt = <1050000>; - }; - vreg_s7b_0p972: smps7 { regulator-name = "vreg_s7b_0p972"; regulator-min-microvolt = <535000>; @@ -385,27 +377,13 @@ vreg_l2b_3p072: ldo2 { vreg_l3b_0p504: ldo3 { regulator-name = "vreg_l3b_0p504"; regulator-min-microvolt = <312000>; - regulator-max-microvolt = <910000>; - regulator-initial-mode = ; - }; - - vreg_l4b_0p752: ldo4 { - regulator-name = "vreg_l4b_0p752"; - regulator-min-microvolt = <752000>; - regulator-max-microvolt = <820000>; - regulator-initial-mode = ; - }; - - reg_l5b_0p752: ldo5 { - regulator-name = "reg_l5b_0p752"; - regulator-min-microvolt = <552000>; - regulator-max-microvolt = <832000>; + regulator-max-microvolt = <650000>; regulator-initial-mode = ; }; vreg_l6b_1p2: ldo6 { regulator-name = "vreg_l6b_1p2"; - regulator-min-microvolt = <1140000>; + regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1260000>; regulator-initial-mode = ; }; @@ -436,7 +414,7 @@ vreg_l9b_1p2: ldo9 { vreg_l11b_1p504: ldo11 { regulator-name = "vreg_l11b_1p504"; - regulator-min-microvolt = <1504000>; + regulator-min-microvolt = <1776000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = ; }; @@ -457,7 +435,7 @@ vreg_l13b_0p53: ldo13 { vreg_l14b_1p08: ldo14 { regulator-name = "vreg_l14b_1p08"; - regulator-min-microvolt = <1080000>; + regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1304000>; regulator-initial-mode = ; }; @@ -521,26 +499,8 @@ regulators-1 { vreg_s1c_2p19: smps1 { regulator-name = "vreg_s1c_2p19"; - regulator-min-microvolt = <2190000>; - regulator-max-microvolt = <2210000>; - }; - - vreg_s2c_0p752: smps2 { - regulator-name = "vreg_s2c_0p752"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <800000>; - }; - - vreg_s5c_0p752: smps5 { - regulator-name = "vreg_s5c_0p752"; - regulator-min-microvolt = <465000>; - regulator-max-microvolt = <1050000>; - }; - - vreg_s7c_0p752: smps7 { - regulator-name = "vreg_s7c_0p752"; - regulator-min-microvolt = <465000>; - regulator-max-microvolt = <800000>; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2208000>; }; vreg_s9c_1p084: smps9 { @@ -600,7 +560,7 @@ vreg_l7c_3p0: ldo7 { vreg_l8c_1p62: ldo8 { regulator-name = "vreg_l8c_1p62"; - regulator-min-microvolt = <1620000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = ; }; @@ -608,7 +568,7 @@ vreg_l8c_1p62: ldo8 { vreg_l9c_2p96: ldo9 { regulator-name = "vreg_l9c_2p96"; regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <35440000>; + regulator-max-microvolt = <3544000>; regulator-initial-mode = ; }; @@ -628,7 +588,7 @@ vreg_l11c_2p8: ldo11 { vreg_l12c_1p65: ldo12 { regulator-name = "vreg_l12c_1p65"; - regulator-min-microvolt = <1650000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = ; }; @@ -1009,10 +969,12 @@ &qup_uart7_tx { }; &qupv3_id_0 { + firmware-name = "qcom/qcs6490/qupv3fw.elf"; status = "okay"; }; &qupv3_id_1 { + firmware-name = "qcom/qcs6490/qupv3fw.elf"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/qcs8300-pmics.dtsi b/arch/arm64/boot/dts/qcom/qcs8300-pmics.dtsi deleted file mode 100644 index a94b0bfa98dc39..00000000000000 --- a/arch/arm64/boot/dts/qcom/qcs8300-pmics.dtsi +++ /dev/null @@ -1,51 +0,0 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. - */ - -#include -#include - -&spmi_bus { - pmm8620au_0: pmic@0 { - compatible = "qcom,pmm8654au", "qcom,spmi-pmic"; - reg = <0x0 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pmm8620au_0_rtc: rtc@6100 { - compatible = "qcom,pmk8350-rtc"; - reg = <0x6100>, <0x6200>; - reg-names = "rtc", "alarm"; - interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; - allow-set-time; - }; - - pmm8620au_0_gpios: gpio@8800 { - compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; - reg = <0x8800>; - gpio-controller; - gpio-ranges = <&pmm8620au_0_gpios 0 0 12>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - pmm8650au_1: pmic@2 { - compatible = "qcom,pmm8654au", "qcom,spmi-pmic"; - reg = <0x2 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pmm8650au_1_gpios: gpio@8800 { - compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; - reg = <0x8800>; - gpio-controller; - gpio-ranges = <&pmm8650au_1_gpios 0 0 12>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts index cabb3f508704bc..9bcb869dd27060 100644 --- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts +++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts @@ -8,8 +8,8 @@ #include #include -#include "qcs8300.dtsi" -#include "qcs8300-pmics.dtsi" +#include "monaco.dtsi" +#include "monaco-pmics.dtsi" / { model = "Qualcomm Technologies, Inc. QCS8300 Ride"; compatible = "qcom,qcs8300-ride", "qcom,qcs8300"; diff --git a/arch/arm64/boot/dts/qcom/qcs8300.dtsi b/arch/arm64/boot/dts/qcom/qcs8300.dtsi deleted file mode 100644 index 8d78ccac411e49..00000000000000 --- a/arch/arm64/boot/dts/qcom/qcs8300.dtsi +++ /dev/null @@ -1,6223 +0,0 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/ { - interrupt-parent = <&intc>; - #address-cells = <2>; - #size-cells = <2>; - - clocks { - xo_board_clk: xo-board-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <38400000>; - }; - - sleep_clk: sleep-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32000>; - }; - }; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a78c"; - reg = <0x0 0x0>; - enable-method = "psci"; - next-level-cache = <&l2_0>; - power-domains = <&cpu_pd0>; - power-domain-names = "psci"; - capacity-dmips-mhz = <1946>; - dynamic-power-coefficient = <472>; - qcom,freq-domain = <&cpufreq_hw 0>; - operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&epss_l3_cl0 MASTER_EPSS_L3_APPS - &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>; - - l2_0: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_0>; - }; - }; - - cpu1: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a78c"; - reg = <0x0 0x100>; - enable-method = "psci"; - next-level-cache = <&l2_1>; - power-domains = <&cpu_pd1>; - power-domain-names = "psci"; - capacity-dmips-mhz = <1946>; - dynamic-power-coefficient = <472>; - qcom,freq-domain = <&cpufreq_hw 0>; - operating-points-v2 = <&cpu0_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&epss_l3_cl0 MASTER_EPSS_L3_APPS - &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>; - - l2_1: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_0>; - }; - }; - - cpu2: cpu@200 { - device_type = "cpu"; - compatible = "arm,cortex-a78c"; - reg = <0x0 0x200>; - enable-method = "psci"; - next-level-cache = <&l2_2>; - power-domains = <&cpu_pd2>; - power-domain-names = "psci"; - capacity-dmips-mhz = <1946>; - dynamic-power-coefficient = <507>; - qcom,freq-domain = <&cpufreq_hw 2>; - operating-points-v2 = <&cpu2_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&epss_l3_cl0 MASTER_EPSS_L3_APPS - &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>; - - l2_2: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_0>; - }; - }; - - cpu3: cpu@300 { - device_type = "cpu"; - compatible = "arm,cortex-a78c"; - reg = <0x0 0x300>; - enable-method = "psci"; - next-level-cache = <&l2_3>; - power-domains = <&cpu_pd3>; - power-domain-names = "psci"; - capacity-dmips-mhz = <1946>; - dynamic-power-coefficient = <507>; - qcom,freq-domain = <&cpufreq_hw 2>; - operating-points-v2 = <&cpu2_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&epss_l3_cl0 MASTER_EPSS_L3_APPS - &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>; - - l2_3: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_0>; - }; - }; - - cpu4: cpu@10000 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x10000>; - enable-method = "psci"; - next-level-cache = <&l2_4>; - power-domains = <&cpu_pd4>; - power-domain-names = "psci"; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; - qcom,freq-domain = <&cpufreq_hw 1>; - operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&epss_l3_cl1 MASTER_EPSS_L3_APPS - &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>; - - l2_4: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_1>; - }; - }; - - cpu5: cpu@10100 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x10100>; - enable-method = "psci"; - next-level-cache = <&l2_5>; - power-domains = <&cpu_pd5>; - power-domain-names = "psci"; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; - qcom,freq-domain = <&cpufreq_hw 1>; - operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&epss_l3_cl1 MASTER_EPSS_L3_APPS - &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>; - - l2_5: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_1>; - }; - }; - - cpu6: cpu@10200 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x10200>; - enable-method = "psci"; - next-level-cache = <&l2_6>; - power-domains = <&cpu_pd6>; - power-domain-names = "psci"; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; - qcom,freq-domain = <&cpufreq_hw 1>; - operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&epss_l3_cl1 MASTER_EPSS_L3_APPS - &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>; - - l2_6: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_1>; - }; - }; - - cpu7: cpu@10300 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x10300>; - enable-method = "psci"; - next-level-cache = <&l2_7>; - power-domains = <&cpu_pd7>; - power-domain-names = "psci"; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; - qcom,freq-domain = <&cpufreq_hw 1>; - operating-points-v2 = <&cpu4_opp_table>; - interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&epss_l3_cl1 MASTER_EPSS_L3_APPS - &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>; - - l2_7: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_1>; - }; - }; - - cpu-map { - cluster0 { - core0 { - cpu = <&cpu0>; - }; - - core1 { - cpu = <&cpu1>; - }; - - core2 { - cpu = <&cpu2>; - }; - - core3 { - cpu = <&cpu3>; - }; - }; - - cluster1 { - core0 { - cpu = <&cpu4>; - }; - - core1 { - cpu = <&cpu5>; - }; - - core2 { - cpu = <&cpu6>; - }; - - core3 { - cpu = <&cpu7>; - }; - }; - }; - - l3_0: l3-cache-0 { - compatible = "cache"; - cache-level = <3>; - cache-unified; - }; - - l3_1: l3-cache-1 { - compatible = "cache"; - cache-level = <3>; - cache-unified; - }; - - idle-states { - entry-method = "psci"; - - little_cpu_sleep_0: cpu-sleep-0-0 { - compatible = "arm,idle-state"; - idle-state-name = "silver-power-collapse"; - arm,psci-suspend-param = <0x40000003>; - entry-latency-us = <449>; - exit-latency-us = <801>; - min-residency-us = <1574>; - local-timer-stop; - }; - - little_cpu_sleep_1: cpu-sleep-0-1 { - compatible = "arm,idle-state"; - idle-state-name = "silver-rail-power-collapse"; - arm,psci-suspend-param = <0x40000004>; - entry-latency-us = <602>; - exit-latency-us = <961>; - min-residency-us = <4288>; - local-timer-stop; - }; - - big_cpu_sleep_0: cpu-sleep-1-0 { - compatible = "arm,idle-state"; - idle-state-name = "gold-power-collapse"; - arm,psci-suspend-param = <0x40000003>; - entry-latency-us = <549>; - exit-latency-us = <901>; - min-residency-us = <1774>; - local-timer-stop; - }; - - big_cpu_sleep_1: cpu-sleep-1-1 { - compatible = "arm,idle-state"; - idle-state-name = "gold-rail-power-collapse"; - arm,psci-suspend-param = <0x40000004>; - entry-latency-us = <702>; - exit-latency-us = <1061>; - min-residency-us = <4488>; - local-timer-stop; - }; - }; - - domain-idle-states { - silver_cluster_sleep: cluster-sleep-0 { - compatible = "domain-idle-state"; - arm,psci-suspend-param = <0x41000044>; - entry-latency-us = <2552>; - exit-latency-us = <2848>; - min-residency-us = <5908>; - }; - - gold_cluster_sleep: cluster-sleep-1 { - compatible = "domain-idle-state"; - arm,psci-suspend-param = <0x41000044>; - entry-latency-us = <2752>; - exit-latency-us = <3048>; - min-residency-us = <6118>; - }; - - system_sleep: domain-sleep { - compatible = "domain-idle-state"; - arm,psci-suspend-param = <0x42000144>; - entry-latency-us = <3263>; - exit-latency-us = <6562>; - min-residency-us = <9987>; - }; - }; - }; - - cpu0_opp_table: opp-table-cpu0 { - compatible = "operating-points-v2"; - opp-shared; - - opp-902400000 { - opp-hz = /bits/ 64 <902400000>; - opp-peak-kBps = <(681600 * 4) (921600 * 32)>; - }; - - opp-1017600000 { - opp-hz = /bits/ 64 <1017600000>; - opp-peak-kBps = <(1017600 * 4) (921600 * 32)>; - }; - - opp-1190400000 { - opp-hz = /bits/ 64 <1190400000>; - opp-peak-kBps = <(1708800 * 4) (921600 * 32)>; - }; - - opp-1267200000 { - opp-hz = /bits/ 64 <1267200000>; - opp-peak-kBps = <(2092800 * 4) (998400 * 32)>; - }; - - opp-1344000000 { - opp-hz = /bits/ 64 <1344000000>; - opp-peak-kBps = <(2092800 * 4) (1075200 * 32)>; - }; - - opp-1420800000 { - opp-hz = /bits/ 64 <1420800000>; - opp-peak-kBps = <(2092800 * 4) (1152000 * 32)>; - }; - - opp-1497600000 { - opp-hz = /bits/ 64 <1497600000>; - opp-peak-kBps = <(2092800 * 4) (1228800 * 32)>; - }; - - opp-1574400000 { - opp-hz = /bits/ 64 <1574400000>; - opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>; - }; - - opp-1670400000 { - opp-hz = /bits/ 64 <1670400000>; - opp-peak-kBps = <(2736000 * 4) (1401600 * 32)>; - }; - - opp-1747200000 { - opp-hz = /bits/ 64 <1747200000>; - opp-peak-kBps = <(2736000 * 4) (1401600 * 32)>; - }; - - opp-1824000000 { - opp-hz = /bits/ 64 <1824000000>; - opp-peak-kBps = <(2736000 * 4) (1478400 * 32)>; - }; - - opp-1900800000 { - opp-hz = /bits/ 64 <1900800000>; - opp-peak-kBps = <(2736000 * 4) (1478400 * 32)>; - }; - - opp-1977600000 { - opp-hz = /bits/ 64 <1977600000>; - opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>; - }; - - opp-2054400000 { - opp-hz = /bits/ 64 <2054400000>; - opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>; - }; - - opp-2112000000 { - opp-hz = /bits/ 64 <2112000000>; - opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>; - }; - - }; - - cpu2_opp_table: opp-table-cpu2 { - compatible = "operating-points-v2"; - opp-shared; - - opp-940800000 { - opp-hz = /bits/ 64 <940800000>; - opp-peak-kBps = <(681600 * 4) (921600 * 32)>; - }; - - opp-1094400000 { - opp-hz = /bits/ 64 <1094400000>; - opp-peak-kBps = <(1017600 * 4) (921600 * 32)>; - }; - - opp-1267200000 { - opp-hz = /bits/ 64 <1267200000>; - opp-peak-kBps = <(1708800 * 4) (921600 * 32)>; - }; - - opp-1344000000 { - opp-hz = /bits/ 64 <1344000000>; - opp-peak-kBps = <(2092800 * 4) (998400 * 32)>; - }; - - opp-1420800000 { - opp-hz = /bits/ 64 <1420800000>; - opp-peak-kBps = <(2092800 * 4) (998400 * 32)>; - }; - - opp-1497600000 { - opp-hz = /bits/ 64 <1497600000>; - opp-peak-kBps = <(2092800 * 4) (1075200 * 32)>; - }; - - opp-1574400000 { - opp-hz = /bits/ 64 <1574400000>; - opp-peak-kBps = <(2092800 * 4) (1152000 * 32)>; - }; - - opp-1632000000 { - opp-hz = /bits/ 64 <1632000000>; - opp-peak-kBps = <(2092800 * 4) (1228800 * 32)>; - }; - - opp-1708800000 { - opp-hz = /bits/ 64 <1708800000>; - opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>; - }; - - opp-1804800000 { - opp-hz = /bits/ 64 <1804800000>; - opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>; - }; - - opp-1900800000 { - opp-hz = /bits/ 64 <1900800000>; - opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>; - }; - - opp-1977600000 { - opp-hz = /bits/ 64 <1977600000>; - opp-peak-kBps = <(2736000 * 4) (1401600 * 32)>; - }; - - opp-2054400000 { - opp-hz = /bits/ 64 <2054400000>; - opp-peak-kBps = <(2736000 * 4) (1478400 * 32)>; - }; - - opp-2131200000 { - opp-hz = /bits/ 64 <2131200000>; - opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>; - }; - - opp-2208000000 { - opp-hz = /bits/ 64 <2208000000>; - opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>; - }; - - opp-2284800000 { - opp-hz = /bits/ 64 <2284800000>; - opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>; - }; - - opp-2361600000 { - opp-hz = /bits/ 64 <2361600000>; - opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>; - }; - - }; - - cpu4_opp_table: opp-table-cpu4 { - compatible = "operating-points-v2"; - opp-shared; - - opp-844800000 { - opp-hz = /bits/ 64 <844800000>; - opp-peak-kBps = <(681600 * 4) (921600 * 32)>; - }; - - opp-1113600000 { - opp-hz = /bits/ 64 <1113600000>; - opp-peak-kBps = <(1708800 * 4) (921600 * 32)>; - }; - - opp-1209600000 { - opp-hz = /bits/ 64 <1209600000>; - opp-peak-kBps = <(2092800 * 4) (998400 * 32)>; - }; - - opp-1305600000 { - opp-hz = /bits/ 64 <1305600000>; - opp-peak-kBps = <(2092800 * 4) (1075200 * 32)>; - }; - - opp-1382400000 { - opp-hz = /bits/ 64 <1382400000>; - opp-peak-kBps = <(2092800 * 4) (1152000 * 32)>; - }; - - opp-1459200000 { - opp-hz = /bits/ 64 <1459200000>; - opp-peak-kBps = <(2092800 * 4) (1228800 * 32)>; - }; - - opp-1497600000 { - opp-hz = /bits/ 64 <1497600000>; - opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>; - }; - - opp-1574400000 { - opp-hz = /bits/ 64 <1574400000>; - opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>; - }; - - opp-1651200000 { - opp-hz = /bits/ 64 <1651200000>; - opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>; - }; - - opp-1728000000 { - opp-hz = /bits/ 64 <1728000000>; - opp-peak-kBps = <(2736000 * 4) (1401600 * 32)>; - }; - - opp-1804800000 { - opp-hz = /bits/ 64 <1804800000>; - opp-peak-kBps = <(2736000 * 4) (1478400 * 32)>; - }; - - opp-1881600000 { - opp-hz = /bits/ 64 <1881600000>; - opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>; - }; - - opp-1958400000 { - opp-hz = /bits/ 64 <1958400000>; - opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>; - }; - }; - - dummy_eud: dummy-sink { - compatible = "arm,coresight-dummy-sink"; - - in-ports { - port { - eud_in: endpoint { - remote-endpoint = <&swao_rep_out1>; - }; - }; - }; - }; - - firmware { - scm: scm { - compatible = "qcom,scm-qcs8300", "qcom,scm"; - qcom,dload-mode = <&tcsr 0x13000>; - }; - }; - - memory@80000000 { - device_type = "memory"; - /* We expect the bootloader to fill in the size */ - reg = <0x0 0x80000000 0x0 0x0>; - }; - - clk_virt: interconnect-0 { - compatible = "qcom,qcs8300-clk-virt"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - mc_virt: interconnect-1 { - compatible = "qcom,qcs8300-mc-virt"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - qup_opp_table: opp-table-qup { - compatible = "operating-points-v2"; - - opp-120000000 { - opp-hz = /bits/ 64 <120000000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - }; - - pmu-a55 { - compatible = "arm,cortex-a55-pmu"; - interrupts = ; - }; - - pmu-a78 { - compatible = "arm,cortex-a78-pmu"; - interrupts = ; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - - cpu_pd0: power-domain-cpu0 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd0>; - domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>; - }; - - cpu_pd1: power-domain-cpu1 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd0>; - domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>; - }; - - cpu_pd2: power-domain-cpu2 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd0>; - domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>; - }; - - cpu_pd3: power-domain-cpu3 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd0>; - domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>; - }; - - cpu_pd4: power-domain-cpu4 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd1>; - domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; - }; - - cpu_pd5: power-domain-cpu5 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd1>; - domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; - }; - - cpu_pd6: power-domain-cpu6 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd1>; - domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; - }; - - cpu_pd7: power-domain-cpu7 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd1>; - domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; - }; - - cluster_pd0: power-domain-cluster0 { - #power-domain-cells = <0>; - power-domains = <&system_pd>; - domain-idle-states = <&gold_cluster_sleep>; - }; - - cluster_pd1: power-domain-cluster1 { - #power-domain-cells = <0>; - power-domains = <&system_pd>; - domain-idle-states = <&silver_cluster_sleep>; - }; - - system_pd: power-domain-system { - #power-domain-cells = <0>; - domain-idle-states = <&system_sleep>; - }; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - aop_image_mem: aop-image-region@90800000 { - reg = <0x0 0x90800000 0x0 0x60000>; - no-map; - }; - - aop_cmd_db_mem: aop-cmd-db-region@90860000 { - compatible = "qcom,cmd-db"; - reg = <0x0 0x90860000 0x0 0x20000>; - no-map; - }; - - smem_mem: smem@90900000 { - compatible = "qcom,smem"; - reg = <0x0 0x90900000 0x0 0x200000>; - no-map; - hwlocks = <&tcsr_mutex 3>; - }; - - lpass_machine_learning_mem: lpass-machine-learning-region@93b00000 { - reg = <0x0 0x93b00000 0x0 0xf00000>; - no-map; - }; - - adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap-region@94a00000 { - reg = <0x0 0x94a00000 0x0 0x800000>; - no-map; - }; - - camera_mem: camera-region@95200000 { - reg = <0x0 0x95200000 0x0 0x500000>; - no-map; - }; - - adsp_mem: adsp-region@95c00000 { - no-map; - reg = <0x0 0x95c00000 0x0 0x1e00000>; - }; - - q6_adsp_dtb_mem: q6-adsp-dtb-region@97a00000 { - reg = <0x0 0x97a00000 0x0 0x80000>; - no-map; - }; - - q6_gpdsp_dtb_mem: q6-gpdsp-dtb-region@97a80000 { - reg = <0x0 0x97a80000 0x0 0x80000>; - no-map; - }; - - gpdsp_mem: gpdsp-region@97b00000 { - reg = <0x0 0x97b00000 0x0 0x1e00000>; - no-map; - }; - - q6_cdsp_dtb_mem: q6-cdsp-dtb-region@99900000 { - reg = <0x0 0x99900000 0x0 0x80000>; - no-map; - }; - - cdsp_mem: cdsp-region@99980000 { - reg = <0x0 0x99980000 0x0 0x1e00000>; - no-map; - }; - - gpu_microcode_mem: gpu-microcode-region@9b780000 { - reg = <0x0 0x9b780000 0x0 0x2000>; - no-map; - }; - - cvp_mem: cvp-region@9b782000 { - reg = <0x0 0x9b782000 0x0 0x700000>; - no-map; - }; - - video_mem: video-region@9be82000 { - reg = <0x0 0x9be82000 0x0 0x700000>; - no-map; - }; - }; - - smp2p-adsp { - compatible = "qcom,smp2p"; - interrupts-extended = <&ipcc IPCC_CLIENT_LPASS - IPCC_MPROC_SIGNAL_SMP2P - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_LPASS - IPCC_MPROC_SIGNAL_SMP2P>; - - qcom,smem = <443>, <429>; - qcom,local-pid = <0>; - qcom,remote-pid = <2>; - - smp2p_adsp_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - smp2p_adsp_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; - }; - - smp2p-cdsp { - compatible = "qcom,smp2p"; - interrupts-extended = <&ipcc IPCC_CLIENT_CDSP - IPCC_MPROC_SIGNAL_SMP2P - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_CDSP - IPCC_MPROC_SIGNAL_SMP2P>; - - qcom,smem = <94>, <432>; - qcom,local-pid = <0>; - qcom,remote-pid = <5>; - - smp2p_cdsp_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - smp2p_cdsp_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; - }; - - smp2p-gpdsp { - compatible = "qcom,smp2p"; - interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0 - IPCC_MPROC_SIGNAL_SMP2P - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_GPDSP0 - IPCC_MPROC_SIGNAL_SMP2P>; - - qcom,smem = <617>, <616>; - qcom,local-pid = <0>; - qcom,remote-pid = <17>; - - smp2p_gpdsp_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - smp2p_gpdsp_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; - }; - - soc: soc@0 { - compatible = "simple-bus"; - ranges = <0 0 0 0 0x10 0>; - #address-cells = <2>; - #size-cells = <2>; - - gcc: clock-controller@100000 { - compatible = "qcom,qcs8300-gcc"; - reg = <0x0 0x00100000 0x0 0xc7018>; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&sleep_clk>, - <0>, - <0>, - <0>, - <0>, - <0>, - <0>, - <0>, - <0>; - }; - - ipcc: mailbox@408000 { - compatible = "qcom,qcs8300-ipcc", "qcom,ipcc"; - reg = <0x0 0x408000 0x0 0x1000>; - interrupts = ; - interrupt-controller; - #interrupt-cells = <3>; - #mbox-cells = <2>; - }; - - qfprom: efuse@784000 { - compatible = "qcom,qcs8300-qfprom", "qcom,qfprom"; - reg = <0x0 0x00784000 0x0 0x2410>; - #address-cells = <1>; - #size-cells = <1>; - - gpu_speed_bin: gpu_speed_bin@240c { - reg = <0x240c 0x1>; - bits = <0 8>; - }; - }; - - gpi_dma0: dma-controller@900000 { - compatible = "qcom,qcs8300-gpi-dma", "qcom,sm6350-gpi-dma"; - reg = <0x0 0x900000 0x0 0x60000>; - #dma-cells = <3>; - interrupts = , - , - , - , - , - , - , - , - , - , - , - ; - iommus = <&apps_smmu 0x416 0x0>; - dma-channels = <12>; - dma-channel-mask = <0xfff>; - dma-coherent; - status = "disabled"; - }; - - qupv3_id_0: geniqup@9c0000 { - compatible = "qcom,geni-se-qup"; - reg = <0x0 0x9c0000 0x0 0x2000>; - ranges; - clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, - <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; - clock-names = "m-ahb", - "s-ahb"; - #address-cells = <2>; - #size-cells = <2>; - iommus = <&apps_smmu 0x403 0x0>; - dma-coherent; - status = "disabled"; - - i2c0: i2c@980000 { - compatible = "qcom,geni-i2c"; - reg = <0x0 0x980000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_i2c0_data_clk>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, - <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, - <&gpi_dma0 1 0 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - spi0: spi@980000 { - compatible = "qcom,geni-spi"; - reg = <0x0 0x980000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, - <&gpi_dma0 1 0 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - uart0: serial@980000 { - compatible = "qcom,geni-uart"; - reg = <0x0 0x980000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_uart0_cts>, <&qup_uart0_rts>, - <&qup_uart0_tx>, <&qup_uart0_rx>; - pinctrl-names = "default"; - interrupts = ; - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - status = "disabled"; - }; - - i2c1: i2c@984000 { - compatible = "qcom,geni-i2c"; - reg = <0x0 0x984000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_i2c1_data_clk>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, - <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, - <&gpi_dma0 1 1 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - spi1: spi@984000 { - compatible = "qcom,geni-spi"; - reg = <0x0 0x984000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, - <&gpi_dma0 1 1 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - uart1: serial@984000 { - compatible = "qcom,geni-uart"; - reg = <0x0 0x984000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_uart1_cts>, <&qup_uart1_rts>, - <&qup_uart1_tx>, <&qup_uart1_rx>; - pinctrl-names = "default"; - interrupts = ; - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - status = "disabled"; - }; - - i2c2: i2c@988000 { - compatible = "qcom,geni-i2c"; - reg = <0x0 0x988000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_i2c2_data_clk>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, - <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, - <&gpi_dma0 1 2 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - spi2: spi@988000 { - compatible = "qcom,geni-spi"; - reg = <0x0 0x988000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, - <&gpi_dma0 1 2 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - uart2: serial@988000 { - compatible = "qcom,geni-uart"; - reg = <0x0 0x988000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_uart2_cts>, <&qup_uart2_rts>, - <&qup_uart2_tx>, <&qup_uart2_rx>; - pinctrl-names = "default"; - interrupts = ; - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - status = "disabled"; - }; - - i2c3: i2c@98c000 { - compatible = "qcom,geni-i2c"; - reg = <0x0 0x98c000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_i2c3_data_clk>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, - <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, - <&gpi_dma0 1 3 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - spi3: spi@98c000 { - compatible = "qcom,geni-spi"; - reg = <0x0 0x98c000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, - <&gpi_dma0 1 3 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - uart3: serial@98c000 { - compatible = "qcom,geni-uart"; - reg = <0x0 0x98c000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_uart3_cts>, <&qup_uart3_rts>, - <&qup_uart3_tx>, <&qup_uart3_rx>; - pinctrl-names = "default"; - interrupts = ; - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - status = "disabled"; - }; - - i2c4: i2c@990000 { - compatible = "qcom,geni-i2c"; - reg = <0x0 0x990000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_i2c4_data_clk>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, - <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, - <&gpi_dma0 1 4 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - spi4: spi@990000 { - compatible = "qcom,geni-spi"; - reg = <0x0 0x990000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, - <&gpi_dma0 1 4 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - uart4: serial@990000 { - compatible = "qcom,geni-uart"; - reg = <0x0 0x990000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_uart4_cts>, <&qup_uart4_rts>, - <&qup_uart4_tx>, <&qup_uart4_rx>; - pinctrl-names = "default"; - interrupts = ; - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - status = "disabled"; - }; - - i2c5: i2c@994000 { - compatible = "qcom,geni-i2c"; - reg = <0x0 0x994000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_i2c5_data_clk>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, - <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, - <&gpi_dma0 1 5 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - spi5: spi@994000 { - compatible = "qcom,geni-spi"; - reg = <0x0 0x994000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, - <&gpi_dma0 1 5 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - uart5: serial@994000 { - compatible = "qcom,geni-uart"; - reg = <0x0 0x994000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_uart5_cts>, <&qup_uart5_rts>, - <&qup_uart5_tx>, <&qup_uart5_rx>; - pinctrl-names = "default"; - interrupts = ; - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - status = "disabled"; - }; - - i2c6: i2c@998000 { - compatible = "qcom,geni-i2c"; - reg = <0x0 0x998000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_i2c6_data_clk>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, - <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, - <&gpi_dma0 1 6 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - spi6: spi@998000 { - compatible = "qcom,geni-spi"; - reg = <0x0 0x998000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, - <&gpi_dma0 1 6 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - uart6: serial@998000 { - compatible = "qcom,geni-uart"; - reg = <0x0 0x998000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_uart6_cts>, <&qup_uart6_rts>, - <&qup_uart6_tx>, <&qup_uart6_rx>; - pinctrl-names = "default"; - interrupts = ; - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - status = "disabled"; - }; - - uart7: serial@99c000 { - compatible = "qcom,geni-debug-uart"; - reg = <0x0 0x0099c000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; - pinctrl-names = "default"; - interrupts = ; - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - status = "disabled"; - }; - }; - - gpi_dma1: dma-controller@a00000 { - compatible = "qcom,qcs8300-gpi-dma", "qcom,sm6350-gpi-dma"; - reg = <0x0 0xa00000 0x0 0x60000>; - #dma-cells = <3>; - interrupts = , - , - , - , - , - , - , - , - , - , - , - ; - iommus = <&apps_smmu 0x456 0x0>; - dma-channels = <12>; - dma-channel-mask = <0xfff>; - dma-coherent; - status = "disabled"; - }; - - qupv3_id_1: geniqup@ac0000 { - compatible = "qcom,geni-se-qup"; - reg = <0x0 0xac0000 0x0 0x2000>; - ranges; - clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, - <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; - clock-names = "m-ahb", - "s-ahb"; - #address-cells = <2>; - #size-cells = <2>; - iommus = <&apps_smmu 0x443 0x0>; - dma-coherent; - status = "disabled"; - - i2c8: i2c@a80000 { - compatible = "qcom,geni-i2c"; - reg = <0x0 0xa80000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_i2c8_data_clk>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, - <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, - <&gpi_dma1 1 0 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - spi8: spi@a80000 { - compatible = "qcom,geni-spi"; - reg = <0x0 0xa80000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, - <&gpi_dma1 1 0 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - uart8: serial@a80000 { - compatible = "qcom,geni-uart"; - reg = <0x0 0xa80000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_uart8_cts>, <&qup_uart8_rts>, - <&qup_uart8_tx>, <&qup_uart8_rx>; - pinctrl-names = "default"; - interrupts = ; - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - status = "disabled"; - }; - - i2c9: i2c@a84000 { - compatible = "qcom,geni-i2c"; - reg = <0x0 0xa84000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_i2c9_data_clk>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, - <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, - <&gpi_dma1 1 1 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - spi9: spi@a84000 { - compatible = "qcom,geni-spi"; - reg = <0x0 0xa84000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, - <&gpi_dma1 1 1 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - uart9: serial@a84000 { - compatible = "qcom,geni-uart"; - reg = <0x0 0xa84000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_uart9_cts>, <&qup_uart9_rts>, - <&qup_uart9_tx>, <&qup_uart9_rx>; - pinctrl-names = "default"; - interrupts = ; - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - status = "disabled"; - }; - - i2c10: i2c@a88000 { - compatible = "qcom,geni-i2c"; - reg = <0x0 0xa88000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_i2c10_data_clk>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, - <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, - <&gpi_dma1 1 2 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - spi10: spi@a88000 { - compatible = "qcom,geni-spi"; - reg = <0x0 0xa88000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, - <&gpi_dma1 1 2 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - uart10: serial@a88000 { - compatible = "qcom,geni-uart"; - reg = <0x0 0xa88000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_uart10_cts>, <&qup_uart10_rts>, - <&qup_uart10_tx>, <&qup_uart10_rx>; - pinctrl-names = "default"; - interrupts = ; - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - status = "disabled"; - }; - - i2c11: i2c@a8c000 { - compatible = "qcom,geni-i2c"; - reg = <0x0 0xa8c000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_i2c11_data_clk>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, - <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, - <&gpi_dma1 1 3 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - uart11: serial@a8c000 { - compatible = "qcom,geni-uart"; - reg = <0x0 0xa8c000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_uart11_tx>, <&qup_uart11_rx>; - pinctrl-names = "default"; - interrupts = ; - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - status = "disabled"; - }; - - i2c12: i2c@a90000 { - compatible = "qcom,geni-i2c"; - reg = <0x0 0xa90000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_i2c12_data_clk>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, - <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, - <&gpi_dma1 1 4 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - spi12: spi@a90000 { - compatible = "qcom,geni-spi"; - reg = <0x0 0xa90000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, - <&gpi_dma1 1 4 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - uart12: serial@a90000 { - compatible = "qcom,geni-uart"; - reg = <0x0 0xa90000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_uart12_cts>, <&qup_uart12_rts>, - <&qup_uart12_tx>, <&qup_uart12_rx>; - pinctrl-names = "default"; - interrupts = ; - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - status = "disabled"; - }; - - i2c13: i2c@a94000 { - compatible = "qcom,geni-i2c"; - reg = <0x0 0xa94000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_i2c13_data_clk>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, - <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, - <&gpi_dma1 1 5 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - spi13: spi@a94000 { - compatible = "qcom,geni-spi"; - reg = <0x0 0xa94000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, - <&gpi_dma1 1 5 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - uart13: serial@a94000 { - compatible = "qcom,geni-uart"; - reg = <0x0 0xa94000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_uart13_cts>, <&qup_uart13_rts>, - <&qup_uart13_tx>, <&qup_uart13_rx>; - pinctrl-names = "default"; - interrupts = ; - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - status = "disabled"; - }; - - i2c14: i2c@a98000 { - compatible = "qcom,geni-i2c"; - reg = <0x0 0xa98000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_i2c14_data_clk>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, - <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, - <&gpi_dma1 1 6 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - spi14: spi@a98000 { - compatible = "qcom,geni-spi"; - reg = <0x0 0xa98000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, - <&gpi_dma1 1 6 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - uart14: serial@a98000 { - compatible = "qcom,geni-uart"; - reg = <0x0 0xa98000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_uart14_cts>, <&qup_uart14_rts>, - <&qup_uart14_tx>, <&qup_uart14_rx>; - pinctrl-names = "default"; - interrupts = ; - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - status = "disabled"; - }; - - i2c15: i2c@a9c000 { - compatible = "qcom,geni-i2c"; - reg = <0x0 0xa9c000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_i2c15_data_clk>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, - <&aggre2_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, - <&gpi_dma1 1 7 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - spi15: spi@a9c000 { - compatible = "qcom,geni-spi"; - reg = <0x0 0xa9c000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>, - <&gpi_dma1 1 7 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - uart15: serial@a9c000 { - compatible = "qcom,geni-uart"; - reg = <0x0 0xa9c000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_uart15_cts>, <&qup_uart15_rts>, - <&qup_uart15_tx>, <&qup_uart15_rx>; - pinctrl-names = "default"; - interrupts = ; - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - status = "disabled"; - }; - }; - - gpi_dma3: dma-controller@b00000 { - compatible = "qcom,qcs8300-gpi-dma", "qcom,sm6350-gpi-dma"; - reg = <0x0 0xb00000 0x0 0x60000>; - #dma-cells = <3>; - interrupts = , - , - , - ; - iommus = <&apps_smmu 0x56 0x0>; - dma-channels = <4>; - dma-channel-mask = <0xf>; - dma-coherent; - status = "disabled"; - }; - - qupv3_id_3: geniqup@bc0000 { - compatible = "qcom,geni-se-qup"; - reg = <0x0 0xbc0000 0x0 0x2000>; - ranges; - clocks = <&gcc GCC_QUPV3_WRAP_3_M_AHB_CLK>, - <&gcc GCC_QUPV3_WRAP_3_S_AHB_CLK>; - clock-names = "m-ahb", - "s-ahb"; - #address-cells = <2>; - #size-cells = <2>; - iommus = <&apps_smmu 0x43 0x0>; - dma-coherent; - status = "disabled"; - - i2c16: i2c@b80000 { - compatible = "qcom,geni-i2c"; - reg = <0x0 0xb80000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_i2c16_data_clk>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>, - <&aggre2_noc MASTER_QUP_3 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma3 0 0 QCOM_GPI_I2C>, - <&gpi_dma3 1 0 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - spi16: spi@b80000 { - compatible = "qcom,geni-spi"; - reg = <0x0 0xb80000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - dmas = <&gpi_dma3 0 0 QCOM_GPI_SPI>, - <&gpi_dma3 1 0 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - uart16: serial@b80000 { - compatible = "qcom,geni-uart"; - reg = <0x0 0xb80000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP3_S0_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_uart16_cts>, <&qup_uart16_rts>, - <&qup_uart16_tx>, <&qup_uart16_rx>; - pinctrl-names = "default"; - interrupts = ; - interconnects = <&clk_virt MASTER_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_3 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_3 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - status = "disabled"; - }; - }; - - rng: rng@10d2000 { - compatible = "qcom,qcs8300-trng", "qcom,trng"; - reg = <0x0 0x010d2000 0x0 0x1000>; - }; - - config_noc: interconnect@14c0000 { - compatible = "qcom,qcs8300-config-noc"; - reg = <0x0 0x014c0000 0x0 0x13080>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - system_noc: interconnect@1680000 { - compatible = "qcom,qcs8300-system-noc"; - reg = <0x0 0x01680000 0x0 0x15080>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - aggre1_noc: interconnect@16c0000 { - compatible = "qcom,qcs8300-aggre1-noc"; - reg = <0x0 0x016c0000 0x0 0x17080>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - aggre2_noc: interconnect@1700000 { - compatible = "qcom,qcs8300-aggre2-noc"; - reg = <0x0 0x01700000 0x0 0x1a080>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - pcie_anoc: interconnect@1760000 { - compatible = "qcom,qcs8300-pcie-anoc"; - reg = <0x0 0x01760000 0x0 0xc080>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - gpdsp_anoc: interconnect@1780000 { - compatible = "qcom,qcs8300-gpdsp-anoc"; - reg = <0x0 0x01780000 0x0 0xd080>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - mmss_noc: interconnect@17a0000 { - compatible = "qcom,qcs8300-mmss-noc"; - reg = <0x0 0x017a0000 0x0 0x40000>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - ufs_mem_hc: ufs@1d84000 { - compatible = "qcom,qcs8300-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; - reg = <0x0 0x01d84000 0x0 0x3000>; - interrupts = ; - phys = <&ufs_mem_phy>; - phy-names = "ufsphy"; - lanes-per-direction = <2>; - #reset-cells = <1>; - resets = <&gcc GCC_UFS_PHY_BCR>; - reset-names = "rst"; - - power-domains = <&gcc GCC_UFS_PHY_GDSC>; - required-opps = <&rpmhpd_opp_nom>; - - iommus = <&apps_smmu 0x100 0x0>; - dma-coherent; - - interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "ufs-ddr", - "cpu-ufs"; - - clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, - <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, - <&gcc GCC_UFS_PHY_AHB_CLK>, - <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, - <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; - clock-names = "core_clk", - "bus_aggr_clk", - "iface_clk", - "core_clk_unipro", - "ref_clk", - "tx_lane0_sync_clk", - "rx_lane0_sync_clk", - "rx_lane1_sync_clk"; - freq-table-hz = <75000000 300000000>, - <0 0>, - <0 0>, - <75000000 300000000>, - <0 0>, - <0 0>, - <0 0>, - <0 0>; - qcom,ice = <&ice>; - status = "disabled"; - }; - - ufs_mem_phy: phy@1d87000 { - compatible = "qcom,qcs8300-qmp-ufs-phy", "qcom,sa8775p-qmp-ufs-phy"; - reg = <0x0 0x01d87000 0x0 0xe10>; - /* - * Yes, GCC_EDP_REF_CLKREF_EN is correct in qref. It - * enables the CXO clock to eDP *and* UFS PHY. - */ - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, - <&gcc GCC_EDP_REF_CLKREF_EN>; - clock-names = "ref", - "ref_aux", - "qref"; - power-domains = <&gcc GCC_UFS_PHY_GDSC>; - - resets = <&ufs_mem_hc 0>; - reset-names = "ufsphy"; - - #phy-cells = <0>; - status = "disabled"; - }; - - cryptobam: dma-controller@1dc4000 { - compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; - reg = <0x0 0x01dc4000 0x0 0x28000>; - interrupts = ; - #dma-cells = <1>; - qcom,ee = <0>; - qcom,controlled-remotely; - num-channels = <20>; - qcom,num-ees = <4>; - iommus = <&apps_smmu 0x480 0x00>, - <&apps_smmu 0x481 0x00>; - }; - - ice: crypto@1d88000 { - compatible = "qcom,qcs8300-inline-crypto-engine", - "qcom,inline-crypto-engine"; - reg = <0x0 0x01d88000 0x0 0x18000>; - clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; - }; - - tcsr_mutex: hwlock@1f40000 { - compatible = "qcom,tcsr-mutex"; - reg = <0x0 0x01f40000 0x0 0x20000>; - #hwlock-cells = <1>; - }; - - tcsr: syscon@1fc0000 { - compatible = "qcom,qcs8300-tcsr", "syscon"; - reg = <0x0 0x1fc0000 0x0 0x30000>; - }; - - remoteproc_adsp: remoteproc@3000000 { - compatible = "qcom,qcs8300-adsp-pas", "qcom,sa8775p-adsp-pas"; - reg = <0x0 0x3000000 0x0 0x00100>; - - interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", - "fatal", - "ready", - "handover", - "stop-ack"; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; - - power-domains = <&rpmhpd RPMHPD_LCX>, - <&rpmhpd RPMHPD_LMX>; - power-domain-names = "lcx", - "lmx"; - - memory-region = <&adsp_mem>; - - qcom,qmp = <&aoss_qmp>; - - qcom,smem-states = <&smp2p_adsp_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - remoteproc_adsp_glink: glink-edge { - interrupts-extended = <&ipcc IPCC_CLIENT_LPASS - IPCC_MPROC_SIGNAL_GLINK_QMP - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_LPASS - IPCC_MPROC_SIGNAL_GLINK_QMP>; - - label = "lpass"; - qcom,remote-pid = <2>; - - fastrpc { - compatible = "qcom,fastrpc"; - qcom,glink-channels = "fastrpcglink-apps-dsp"; - label = "adsp"; - memory-region = <&adsp_rpc_remote_heap_mem>; - qcom,vmids = ; - #address-cells = <1>; - #size-cells = <0>; - - compute-cb@3 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <3>; - iommus = <&apps_smmu 0x2003 0x0>; - dma-coherent; - }; - - compute-cb@4 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <4>; - iommus = <&apps_smmu 0x2004 0x0>; - dma-coherent; - }; - - compute-cb@5 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <5>; - iommus = <&apps_smmu 0x2005 0x0>; - dma-coherent; - }; - }; - - gpr { - compatible = "qcom,gpr"; - qcom,glink-channels = "adsp_apps"; - qcom,domain = ; - qcom,intents = <512 20>; - #address-cells = <1>; - #size-cells = <0>; - - q6apm: service@1 { - compatible = "qcom,q6apm"; - reg = ; - #sound-dai-cells = <0>; - qcom,protection-domain = "avs/audio", - "msm/adsp/audio_pd"; - - q6apmbedai: bedais { - compatible = "qcom,q6apm-lpass-dais"; - #sound-dai-cells = <1>; - }; - - q6apmdai: dais { - compatible = "qcom,q6apm-dais"; - iommus = <&apps_smmu 0x2001 0x0>; - }; - }; - - q6prm: service@2 { - compatible = "qcom,q6prm"; - reg = ; - qcom,protection-domain = "avs/audio", - "msm/adsp/audio_pd"; - - q6prmcc: clock-controller { - compatible = "qcom,q6prm-lpass-clocks"; - #clock-cells = <2>; - }; - }; - }; - }; - }; - - lpass_ag_noc: interconnect@3c40000 { - compatible = "qcom,qcs8300-lpass-ag-noc"; - reg = <0x0 0x03c40000 0x0 0x17200>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - stm@4002000 { - compatible = "arm,coresight-stm", "arm,primecell"; - reg = <0x0 0x04002000 0x0 0x1000>, - <0x0 0x16280000 0x0 0x180000>; - reg-names = "stm-base", - "stm-stimulus-base"; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - out-ports { - port { - stm_out: endpoint { - remote-endpoint = <&funnel0_in7>; - }; - }; - }; - }; - - tpda@4004000 { - compatible = "qcom,coresight-tpda", "arm,primecell"; - reg = <0x0 0x04004000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - - qdss_tpda_in1: endpoint { - remote-endpoint = <&qdss_tpdm1_out>; - }; - }; - }; - - out-ports { - port { - qdss_tpda_out: endpoint { - remote-endpoint = <&funnel0_in6>; - }; - }; - }; - }; - - tpdm@400f000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x0400f000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,cmb-element-bits = <32>; - qcom,cmb-msrs-num = <32>; - - out-ports { - port { - qdss_tpdm1_out: endpoint { - remote-endpoint = <&qdss_tpda_in1>; - }; - }; - }; - }; - - funnel@4041000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x0 0x04041000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@6 { - reg = <6>; - - funnel0_in6: endpoint { - remote-endpoint = <&qdss_tpda_out>; - }; - }; - - port@7 { - reg = <7>; - - funnel0_in7: endpoint { - remote-endpoint = <&stm_out>; - }; - }; - }; - - out-ports { - port { - funnel0_out: endpoint { - remote-endpoint = <&qdss_funnel_in0>; - }; - }; - }; - }; - - funnel@4042000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x0 0x04042000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@4 { - reg = <4>; - - funnel1_in4: endpoint { - remote-endpoint = <&apss_funnel1_out>; - }; - }; - - port@5 { - reg = <5>; - - funnel1_in5: endpoint { - remote-endpoint = <&dlct0_funnel_out>; - }; - }; - - port@6 { - reg = <6>; - - funnel1_in6: endpoint { - remote-endpoint = <&dlmm_funnel_out>; - }; - }; - - port@7 { - reg = <7>; - - funnel1_in7: endpoint { - remote-endpoint = <&dlst_ch_funnel_out>; - }; - }; - }; - - out-ports { - port { - funnel1_out: endpoint { - remote-endpoint = <&qdss_funnel_in1>; - }; - }; - }; - }; - - funnel@4045000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x0 0x04045000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - qdss_funnel_in0: endpoint { - remote-endpoint = <&funnel0_out>; - }; - }; - - port@1 { - reg = <1>; - - qdss_funnel_in1: endpoint { - remote-endpoint = <&funnel1_out>; - }; - }; - }; - - out-ports { - port { - qdss_funnel_out: endpoint { - remote-endpoint = <&aoss_funnel_in7>; - }; - }; - }; - }; - - tpdm@4841000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x04841000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,cmb-element-bits = <32>; - qcom,cmb-msrs-num = <32>; - - out-ports { - port { - prng_tpdm_out: endpoint { - remote-endpoint = <&dlct0_tpda_in19>; - }; - }; - }; - }; - - tpdm@4850000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x04850000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,cmb-element-bits = <64>; - qcom,cmb-msrs-num = <32>; - qcom,dsb-element-bits = <32>; - qcom,dsb-msrs-num = <32>; - - out-ports { - port { - pimem_tpdm_out: endpoint { - remote-endpoint = <&dlct0_tpda_in25>; - }; - }; - }; - }; - - tpdm@4860000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x04860000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,dsb-element-bits = <32>; - qcom,dsb-msrs-num = <32>; - - out-ports { - port { - dlst_ch_tpdm0_out: endpoint { - remote-endpoint = <&dlst_ch_tpda_in8>; - }; - }; - }; - }; - - tpda@4864000 { - compatible = "qcom,coresight-tpda", "arm,primecell"; - reg = <0x0 0x04864000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@8 { - reg = <8>; - - dlst_ch_tpda_in8: endpoint { - remote-endpoint = <&dlst_ch_tpdm0_out>; - }; - }; - }; - - out-ports { - port { - dlst_ch_tpda_out: endpoint { - remote-endpoint = <&dlst_ch_funnel_in0>; - }; - }; - }; - }; - - funnel@4865000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x0 0x04865000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - dlst_ch_funnel_in0: endpoint { - remote-endpoint = <&dlst_ch_tpda_out>; - }; - }; - - port@4 { - reg = <4>; - - dlst_ch_funnel_in4: endpoint { - remote-endpoint = <&dlst_funnel_out>; - }; - }; - - port@6 { - reg = <6>; - - dlst_ch_funnel_in6: endpoint { - remote-endpoint = <&gdsp_funnel_out>; - }; - }; - }; - - out-ports { - port { - dlst_ch_funnel_out: endpoint { - remote-endpoint = <&funnel1_in7>; - }; - }; - }; - }; - - tpdm@4980000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x04980000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,dsb-element-bits = <32>; - qcom,dsb-msrs-num = <32>; - - out-ports { - port { - turing2_tpdm_out: endpoint { - remote-endpoint = <&turing2_funnel_in0>; - }; - }; - }; - }; - - funnel@4983000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x0 0x04983000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - port { - turing2_funnel_in0: endpoint { - remote-endpoint = <&turing2_tpdm_out>; - }; - }; - }; - - out-ports { - port { - turing2_funnel_out0: endpoint { - remote-endpoint = <&gdsp_tpda_in5>; - }; - }; - }; - }; - - tpdm@4ac0000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x04ac0000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,dsb-element-bits = <32>; - qcom,dsb-msrs-num = <32>; - - out-ports { - port { - dlmm_tpdm0_out: endpoint { - remote-endpoint = <&dlmm_tpda_in27>; - }; - }; - }; - }; - - tpda@4ac4000 { - compatible = "qcom,coresight-tpda", "arm,primecell"; - reg = <0x0 0x04ac4000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1b { - reg = <27>; - - dlmm_tpda_in27: endpoint { - remote-endpoint = <&dlmm_tpdm0_out>; - }; - }; - }; - - out-ports { - port { - dlmm_tpda_out: endpoint { - remote-endpoint = <&dlmm_funnel_in0>; - }; - }; - }; - }; - - funnel@4ac5000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x0 0x04ac5000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - port { - dlmm_funnel_in0: endpoint { - remote-endpoint = <&dlmm_tpda_out>; - }; - }; - }; - - out-ports { - port { - dlmm_funnel_out: endpoint { - remote-endpoint = <&funnel1_in6>; - }; - }; - }; - }; - - tpdm@4ad0000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x04ad0000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,dsb-element-bits = <32>; - qcom,dsb-msrs-num = <32>; - - out-ports { - port { - dlct0_tpdm0_out: endpoint { - remote-endpoint = <&dlct0_tpda_in26>; - }; - }; - }; - }; - - tpda@4ad3000 { - compatible = "qcom,coresight-tpda", "arm,primecell"; - reg = <0x0 0x04ad3000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@13 { - reg = <19>; - - dlct0_tpda_in19: endpoint { - remote-endpoint = <&prng_tpdm_out>; - }; - }; - - port@19 { - reg = <25>; - - dlct0_tpda_in25: endpoint { - remote-endpoint = <&pimem_tpdm_out>; - }; - }; - - port@1a { - reg = <26>; - - dlct0_tpda_in26: endpoint { - remote-endpoint = <&dlct0_tpdm0_out>; - }; - }; - }; - - out-ports { - port { - dlct0_tpda_out: endpoint { - remote-endpoint = <&dlct0_funnel_in0>; - }; - }; - }; - }; - - funnel@4ad4000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x0 0x04ad4000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - dlct0_funnel_in0: endpoint { - remote-endpoint = <&dlct0_tpda_out>; - }; - }; - - port@4 { - reg = <4>; - - dlct0_funnel_in4: endpoint { - remote-endpoint = <&ddr_funnel5_out>; - }; - }; - }; - - out-ports { - port { - dlct0_funnel_out: endpoint { - remote-endpoint = <&funnel1_in5>; - }; - }; - }; - }; - - funnel@4b04000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x0 0x04b04000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@6 { - reg = <6>; - - aoss_funnel_in6: endpoint { - remote-endpoint = <&aoss_tpda_out>; - }; - }; - - port@7 { - reg = <7>; - - aoss_funnel_in7: endpoint { - remote-endpoint = <&qdss_funnel_out>; - }; - }; - }; - - out-ports { - port { - aoss_funnel_out: endpoint { - remote-endpoint = <&etf0_in>; - }; - }; - }; - }; - - tmc_etf: tmc@4b05000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0x0 0x04b05000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - port { - etf0_in: endpoint { - remote-endpoint = <&aoss_funnel_out>; - }; - }; - }; - - out-ports { - port { - etf0_out: endpoint { - remote-endpoint = <&swao_rep_in>; - }; - }; - }; - }; - - replicator@4b06000 { - compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; - reg = <0x0 0x04b06000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - port { - swao_rep_in: endpoint { - remote-endpoint = <&etf0_out>; - }; - }; - }; - - out-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - - swao_rep_out1: endpoint { - remote-endpoint = <&eud_in>; - }; - }; - }; - }; - - tpda@4b08000 { - compatible = "qcom,coresight-tpda", "arm,primecell"; - reg = <0x0 0x04b08000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - aoss_tpda_in0: endpoint { - remote-endpoint = <&aoss_tpdm0_out>; - }; - }; - - port@1 { - reg = <1>; - - aoss_tpda_in1: endpoint { - remote-endpoint = <&aoss_tpdm1_out>; - }; - }; - - port@2 { - reg = <2>; - - aoss_tpda_in2: endpoint { - remote-endpoint = <&aoss_tpdm2_out>; - }; - }; - - port@3 { - reg = <3>; - - aoss_tpda_in3: endpoint { - remote-endpoint = <&aoss_tpdm3_out>; - }; - }; - - port@4 { - reg = <4>; - - aoss_tpda_in4: endpoint { - remote-endpoint = <&aoss_tpdm4_out>; - }; - }; - }; - - out-ports { - port { - aoss_tpda_out: endpoint { - remote-endpoint = <&aoss_funnel_in6>; - }; - }; - }; - }; - - tpdm@4b09000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x04b09000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,cmb-element-bits = <64>; - qcom,cmb-msrs-num = <32>; - - out-ports { - port { - aoss_tpdm0_out: endpoint { - remote-endpoint = <&aoss_tpda_in0>; - }; - }; - }; - }; - - tpdm@4b0a000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x04b0a000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,cmb-element-bits = <64>; - qcom,cmb-msrs-num = <32>; - - out-ports { - port { - aoss_tpdm1_out: endpoint { - remote-endpoint = <&aoss_tpda_in1>; - }; - }; - }; - }; - - tpdm@4b0b000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x04b0b000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,cmb-element-bits = <64>; - qcom,cmb-msrs-num = <32>; - - out-ports { - port { - aoss_tpdm2_out: endpoint { - remote-endpoint = <&aoss_tpda_in2>; - }; - }; - }; - }; - - tpdm@4b0c000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x04b0c000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,cmb-element-bits = <64>; - qcom,cmb-msrs-num = <32>; - - out-ports { - port { - aoss_tpdm3_out: endpoint { - remote-endpoint = <&aoss_tpda_in3>; - }; - }; - }; - }; - - tpdm@4b0d000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x04b0d000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,dsb-element-bits = <32>; - qcom,dsb-msrs-num = <32>; - - out-ports { - port { - aoss_tpdm4_out: endpoint { - remote-endpoint = <&aoss_tpda_in4>; - }; - }; - }; - }; - - cti@4b13000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x04b13000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - tpdm@4b80000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x04b80000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,dsb-element-bits = <32>; - qcom,dsb-msrs-num = <32>; - - out-ports { - port { - turing0_tpdm0_out: endpoint { - remote-endpoint = <&turing0_tpda_in0>; - }; - }; - }; - }; - - tpda@4b86000 { - compatible = "qcom,coresight-tpda", "arm,primecell"; - reg = <0x0 0x04b86000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - port { - turing0_tpda_in0: endpoint { - remote-endpoint = <&turing0_tpdm0_out>; - }; - }; - }; - - out-ports { - port { - turing0_tpda_out: endpoint { - remote-endpoint = <&turing0_funnel_in0>; - }; - }; - }; - }; - - funnel@4b87000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x0 0x04b87000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - port { - turing0_funnel_in0: endpoint { - remote-endpoint = <&turing0_tpda_out>; - }; - }; - }; - - out-ports { - port { - turing0_funnel_out: endpoint { - remote-endpoint = <&gdsp_funnel_in4>; - }; - }; - }; - }; - - cti@4b8b000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x04b8b000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - tpdm@4c40000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x04c40000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,dsb-element-bits = <32>; - qcom,dsb-msrs-num = <32>; - - out-ports { - port { - gdsp_tpdm0_out: endpoint { - remote-endpoint = <&gdsp_tpda_in8>; - }; - }; - }; - }; - - tpda@4c44000 { - compatible = "qcom,coresight-tpda", "arm,primecell"; - reg = <0x0 0x04c44000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@5 { - reg = <5>; - - gdsp_tpda_in5: endpoint { - remote-endpoint = <&turing2_funnel_out0>; - }; - }; - - port@8 { - reg = <8>; - - gdsp_tpda_in8: endpoint { - remote-endpoint = <&gdsp_tpdm0_out>; - }; - }; - }; - - out-ports { - port { - gdsp_tpda_out: endpoint { - remote-endpoint = <&gdsp_funnel_in0>; - }; - }; - }; - }; - - funnel@4c45000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x0 0x04c45000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - gdsp_funnel_in0: endpoint { - remote-endpoint = <&gdsp_tpda_out>; - }; - }; - - port@4 { - reg = <4>; - - gdsp_funnel_in4: endpoint { - remote-endpoint = <&turing0_funnel_out>; - }; - }; - }; - - out-ports { - port { - gdsp_funnel_out: endpoint { - remote-endpoint = <&dlst_ch_funnel_in6>; - }; - }; - }; - }; - - tpdm@4c50000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x04c50000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,dsb-element-bits = <32>; - qcom,dsb-msrs-num = <32>; - - out-ports { - port { - dlst_tpdm0_out: endpoint { - remote-endpoint = <&dlst_tpda_in8>; - }; - }; - }; - }; - - tpda@4c54000 { - compatible = "qcom,coresight-tpda", "arm,primecell"; - reg = <0x0 0x04c54000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@8 { - reg = <8>; - - dlst_tpda_in8: endpoint { - remote-endpoint = <&dlst_tpdm0_out>; - }; - }; - }; - - out-ports { - port { - dlst_tpda_out: endpoint { - remote-endpoint = <&dlst_funnel_in0>; - }; - }; - }; - }; - - funnel@4c55000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x0 0x04c55000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - port { - dlst_funnel_in0: endpoint { - remote-endpoint = <&dlst_tpda_out>; - }; - }; - }; - - out-ports { - port { - dlst_funnel_out: endpoint { - remote-endpoint = <&dlst_ch_funnel_in4>; - }; - }; - }; - }; - - tpdm@4e00000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x04e00000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,dsb-element-bits = <32>; - qcom,dsb-msrs-num = <32>; - qcom,cmb-element-bits = <32>; - qcom,cmb-msrs-num = <32>; - - out-ports { - port { - ddr_tpdm3_out: endpoint { - remote-endpoint = <&ddr_tpda_in4>; - }; - }; - }; - }; - - tpda@4e03000 { - compatible = "qcom,coresight-tpda", "arm,primecell"; - reg = <0x0 0x04e03000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - ddr_tpda_in0: endpoint { - remote-endpoint = <&ddr_funnel0_out0>; - }; - }; - - port@1 { - reg = <1>; - - ddr_tpda_in1: endpoint { - remote-endpoint = <&ddr_funnel1_out0>; - }; - }; - - port@4 { - reg = <4>; - - ddr_tpda_in4: endpoint { - remote-endpoint = <&ddr_tpdm3_out>; - }; - }; - }; - - out-ports { - port { - ddr_tpda_out: endpoint { - remote-endpoint = <&ddr_funnel5_in0>; - }; - }; - }; - }; - - funnel@4e04000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x0 0x04e04000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - port { - ddr_funnel5_in0: endpoint { - remote-endpoint = <&ddr_tpda_out>; - }; - }; - }; - - out-ports { - port { - ddr_funnel5_out: endpoint { - remote-endpoint = <&dlct0_funnel_in4>; - }; - }; - }; - }; - - tpdm@4e10000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x04e10000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,dsb-element-bits = <32>; - qcom,dsb-msrs-num = <32>; - - out-ports { - port { - ddr_tpdm0_out: endpoint { - remote-endpoint = <&ddr_funnel0_in0>; - }; - }; - }; - }; - - funnel@4e12000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x0 0x04e12000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - port { - ddr_funnel0_in0: endpoint { - remote-endpoint = <&ddr_tpdm0_out>; - }; - }; - }; - - out-ports { - port { - ddr_funnel0_out0: endpoint { - remote-endpoint = <&ddr_tpda_in0>; - }; - }; - }; - }; - - tpdm@4e20000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x04e20000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,dsb-element-bits = <32>; - qcom,dsb-msrs-num = <32>; - - out-ports { - port { - ddr_tpdm1_out: endpoint { - remote-endpoint = <&ddr_funnel1_in0>; - }; - }; - }; - }; - - funnel@4e22000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x0 0x04e22000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - port { - ddr_funnel1_in0: endpoint { - remote-endpoint = <&ddr_tpdm1_out>; - }; - }; - }; - - out-ports { - port { - ddr_funnel1_out0: endpoint { - remote-endpoint = <&ddr_tpda_in1>; - }; - }; - }; - }; - - etm@6040000 { - compatible = "arm,primecell"; - reg = <0x0 0x06040000 0x0 0x1000>; - cpu = <&cpu0>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; - - out-ports { - port { - etm0_out: endpoint { - remote-endpoint = <&apss_funnel0_in0>; - }; - }; - }; - }; - - etm@6140000 { - compatible = "arm,primecell"; - reg = <0x0 0x06140000 0x0 0x1000>; - cpu = <&cpu1>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; - - out-ports { - port { - etm1_out: endpoint { - remote-endpoint = <&apss_funnel0_in1>; - }; - }; - }; - }; - - etm@6240000 { - compatible = "arm,primecell"; - reg = <0x0 0x06240000 0x0 0x1000>; - cpu = <&cpu2>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; - - out-ports { - port { - etm2_out: endpoint { - remote-endpoint = <&apss_funnel0_in2>; - }; - }; - }; - }; - - etm@6340000 { - compatible = "arm,primecell"; - reg = <0x0 0x06340000 0x0 0x1000>; - cpu = <&cpu3>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; - - out-ports { - port { - etm3_out: endpoint { - remote-endpoint = <&apss_funnel0_in3>; - }; - }; - }; - }; - - etm@6440000 { - compatible = "arm,primecell"; - reg = <0x0 0x06440000 0x0 0x1000>; - cpu = <&cpu4>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; - - out-ports { - port { - etm4_out: endpoint { - remote-endpoint = <&apss_funnel0_in4>; - }; - }; - }; - }; - - etm@6540000 { - compatible = "arm,primecell"; - reg = <0x0 0x06540000 0x0 0x1000>; - cpu = <&cpu5>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; - - out-ports { - port { - etm5_out: endpoint { - remote-endpoint = <&apss_funnel0_in5>; - }; - }; - }; - }; - - etm@6640000 { - compatible = "arm,primecell"; - reg = <0x0 0x06640000 0x0 0x1000>; - cpu = <&cpu6>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; - - out-ports { - port { - etm6_out: endpoint { - remote-endpoint = <&apss_funnel0_in6>; - }; - }; - }; - }; - - etm@6740000 { - compatible = "arm,primecell"; - reg = <0x0 0x06740000 0x0 0x1000>; - cpu = <&cpu7>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; - - out-ports { - port { - etm7_out: endpoint { - remote-endpoint = <&apss_funnel0_in7>; - }; - }; - }; - }; - - funnel@6800000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x0 0x06800000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - apss_funnel0_in0: endpoint { - remote-endpoint = <&etm0_out>; - }; - }; - - port@1 { - reg = <1>; - - apss_funnel0_in1: endpoint { - remote-endpoint = <&etm1_out>; - }; - }; - - port@2 { - reg = <2>; - - apss_funnel0_in2: endpoint { - remote-endpoint = <&etm2_out>; - }; - }; - - port@3 { - reg = <3>; - - apss_funnel0_in3: endpoint { - remote-endpoint = <&etm3_out>; - }; - }; - - port@4 { - reg = <4>; - - apss_funnel0_in4: endpoint { - remote-endpoint = <&etm4_out>; - }; - }; - - port@5 { - reg = <5>; - - apss_funnel0_in5: endpoint { - remote-endpoint = <&etm5_out>; - }; - }; - - port@6 { - reg = <6>; - - apss_funnel0_in6: endpoint { - remote-endpoint = <&etm6_out>; - }; - }; - - port@7 { - reg = <7>; - - apss_funnel0_in7: endpoint { - remote-endpoint = <&etm7_out>; - }; - }; - }; - - out-ports { - port { - apss_funnel0_out: endpoint { - remote-endpoint = <&apss_funnel1_in0>; - }; - }; - }; - }; - - funnel@6810000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x0 0x06810000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - apss_funnel1_in0: endpoint { - remote-endpoint = <&apss_funnel0_out>; - }; - }; - - port@3 { - reg = <3>; - - apss_funnel1_in3: endpoint { - remote-endpoint = <&apss_tpda_out>; - }; - }; - }; - - out-ports { - port { - apss_funnel1_out: endpoint { - remote-endpoint = <&funnel1_in4>; - }; - }; - }; - }; - - cti@682b000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x0682b000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - tpdm@6860000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x06860000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,cmb-element-bits = <64>; - qcom,cmb-msrs-num = <32>; - - out-ports { - port { - apss_tpdm3_out: endpoint { - remote-endpoint = <&apss_tpda_in3>; - }; - }; - }; - }; - - tpdm@6861000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x06861000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,dsb-element-bits = <32>; - qcom,dsb-msrs-num = <32>; - - out-ports { - port { - apss_tpdm4_out: endpoint { - remote-endpoint = <&apss_tpda_in4>; - }; - }; - }; - }; - - tpda@6863000 { - compatible = "qcom,coresight-tpda", "arm,primecell"; - reg = <0x0 0x06863000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - apss_tpda_in0: endpoint { - remote-endpoint = <&apss_tpdm0_out>; - }; - }; - - port@1 { - reg = <1>; - - apss_tpda_in1: endpoint { - remote-endpoint = <&apss_tpdm1_out>; - }; - }; - - port@2 { - reg = <2>; - - apss_tpda_in2: endpoint { - remote-endpoint = <&apss_tpdm2_out>; - }; - }; - - port@3 { - reg = <3>; - - apss_tpda_in3: endpoint { - remote-endpoint = <&apss_tpdm3_out>; - }; - }; - - port@4 { - reg = <4>; - - apss_tpda_in4: endpoint { - remote-endpoint = <&apss_tpdm4_out>; - }; - }; - }; - - out-ports { - port { - apss_tpda_out: endpoint { - remote-endpoint = <&apss_funnel1_in3>; - }; - }; - }; - }; - - tpdm@68a0000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x068a0000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,cmb-element-bits = <32>; - qcom,cmb-msrs-num = <32>; - - out-ports { - port { - apss_tpdm1_out: endpoint { - remote-endpoint = <&apss_tpda_in1>; - }; - }; - }; - }; - - tpdm@68b0000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x068b0000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,cmb-element-bits = <32>; - qcom,cmb-msrs-num = <32>; - - out-ports { - port { - apss_tpdm0_out: endpoint { - remote-endpoint = <&apss_tpda_in0>; - }; - }; - }; - }; - - tpdm@68c0000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x068c0000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,dsb-element-bits = <32>; - qcom,dsb-msrs-num = <32>; - - out-ports { - port { - apss_tpdm2_out: endpoint { - remote-endpoint = <&apss_tpda_in2>; - }; - }; - }; - }; - - cti@68e0000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x068e0000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - cti@68f0000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x068f0000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - cti@6900000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x06900000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - sdhc_1: mmc@87c4000 { - compatible = "qcom,qcs8300-sdhci", "qcom,sdhci-msm-v5"; - reg = <0x0 0x087c4000 0x0 0x1000>, - <0x0 0x087c5000 0x0 0x1000>; - reg-names = "hc", - "cqhci"; - - interrupts = , - ; - interrupt-names = "hc_irq", - "pwr_irq"; - - clocks = <&gcc GCC_SDCC1_AHB_CLK>, - <&gcc GCC_SDCC1_APPS_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "iface", - "core", - "xo"; - - resets = <&gcc GCC_SDCC1_BCR>; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&sdhc1_opp_table>; - iommus = <&apps_smmu 0x0 0x0>; - interconnects = <&aggre1_noc MASTER_SDC QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_SDC1 QCOM_ICC_TAG_ACTIVE_ONLY>; - interconnect-names = "sdhc-ddr", - "cpu-sdhc"; - - qcom,dll-config = <0x000f64ee>; - qcom,ddr-config = <0x80040868>; - supports-cqe; - dma-coherent; - - status = "disabled"; - - sdhc1_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - - opp-384000000 { - opp-hz = /bits/ 64 <384000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - }; - - usb_1_hsphy: phy@8904000 { - compatible = "qcom,qcs8300-usb-hs-phy", - "qcom,usb-snps-hs-7nm-phy"; - reg = <0x0 0x08904000 0x0 0x400>; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "ref"; - - resets = <&gcc GCC_USB2_PHY_PRIM_BCR>; - - #phy-cells = <0>; - - status = "disabled"; - }; - - usb_2_hsphy: phy@8906000 { - compatible = "qcom,qcs8300-usb-hs-phy", - "qcom,usb-snps-hs-7nm-phy"; - reg = <0x0 0x08906000 0x0 0x400>; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "ref"; - - resets = <&gcc GCC_USB2_PHY_SEC_BCR>; - - #phy-cells = <0>; - - status = "disabled"; - }; - - usb_qmpphy: phy@8907000 { - compatible = "qcom,qcs8300-qmp-usb3-uni-phy"; - reg = <0x0 0x08907000 0x0 0x2000>; - - clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, - <&gcc GCC_USB_CLKREF_EN>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, - <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "aux", - "ref", - "com_aux", - "pipe"; - - resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, - <&gcc GCC_USB3PHY_PHY_PRIM_BCR>; - reset-names = "phy", "phy_phy"; - - power-domains = <&gcc GCC_USB30_PRIM_GDSC>; - - #clock-cells = <0>; - clock-output-names = "usb3_prim_phy_pipe_clk_src"; - - #phy-cells = <0>; - - status = "disabled"; - }; - - serdes0: phy@8909000 { - compatible = "qcom,qcs8300-dwmac-sgmii-phy", "qcom,sa8775p-dwmac-sgmii-phy"; - reg = <0x0 0x08909000 0x0 0x00000e10>; - clocks = <&gcc GCC_SGMI_CLKREF_EN>; - clock-names = "sgmi_ref"; - #phy-cells = <0>; - status = "disabled"; - }; - - gpu: gpu@3d00000 { - compatible = "qcom,adreno-623.0", "qcom,adreno"; - reg = <0x0 0x03d00000 0x0 0x40000>, - <0x0 0x03d9e000 0x0 0x1000>, - <0x0 0x03d61000 0x0 0x800>; - reg-names = "kgsl_3d0_reg_memory", - "cx_mem", - "cx_dbgc"; - interrupts = ; - iommus = <&adreno_smmu 0 0xc00>, - <&adreno_smmu 1 0xc00>; - operating-points-v2 = <&gpu_opp_table>; - qcom,gmu = <&gmu>; - interconnects = <&gem_noc MASTER_GFX3D QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "gfx-mem"; - #cooling-cells = <2>; - - nvmem-cells = <&gpu_speed_bin>; - nvmem-cell-names = "speed_bin"; - - status = "disabled"; - - gpu_zap_shader: zap-shader { - memory-region = <&gpu_microcode_mem>; - }; - - gpu_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-877000000 { - opp-hz = /bits/ 64 <877000000>; - opp-level = ; - opp-peak-kBps = <12484375>; - opp-supported-hw = <0x1>; - }; - - opp-780000000 { - opp-hz = /bits/ 64 <780000000>; - opp-level = ; - opp-peak-kBps = <10687500>; - opp-supported-hw = <0x1>; - }; - - opp-599000000 { - opp-hz = /bits/ 64 <599000000>; - opp-level = ; - opp-peak-kBps = <8171875>; - opp-supported-hw = <0x3>; - }; - - opp-479000000 { - opp-hz = /bits/ 64 <479000000>; - opp-level = ; - opp-peak-kBps = <5285156>; - opp-supported-hw = <0x3>; - }; - }; - }; - - gmu: gmu@3d6a000 { - compatible = "qcom,adreno-gmu-623.0", "qcom,adreno-gmu"; - reg = <0x0 0x03d6a000 0x0 0x34000>, - <0x0 0x03de0000 0x0 0x10000>, - <0x0 0x0b290000 0x0 0x10000>; - reg-names = "gmu", "rscc", "gmu_pdc"; - interrupts = , - ; - interrupt-names = "hfi", "gmu"; - clocks = <&gpucc GPU_CC_CX_GMU_CLK>, - <&gpucc GPU_CC_CXO_CLK>, - <&gcc GCC_DDRSS_GPU_AXI_CLK>, - <&gcc GCC_GPU_MEMNOC_GFX_CLK>, - <&gpucc GPU_CC_AHB_CLK>, - <&gpucc GPU_CC_HUB_CX_INT_CLK>; - clock-names = "gmu", - "cxo", - "axi", - "memnoc", - "ahb", - "hub"; - power-domains = <&gpucc GPU_CC_CX_GDSC>, - <&gpucc GPU_CC_GX_GDSC>; - power-domain-names = "cx", - "gx"; - iommus = <&adreno_smmu 5 0xc00>; - operating-points-v2 = <&gmu_opp_table>; - - gmu_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-level = ; - }; - }; - }; - - gpucc: clock-controller@3d90000 { - compatible = "qcom,qcs8300-gpucc"; - reg = <0x0 0x03d90000 0x0 0xa000>; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_GPU_GPLL0_CLK_SRC>, - <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; - clock-names = "bi_tcxo", - "gcc_gpu_gpll0_clk_src", - "gcc_gpu_gpll0_div_clk_src"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; - - adreno_smmu: iommu@3da0000 { - compatible = "qcom,qcs8300-smmu-500", "qcom,adreno-smmu", - "qcom,smmu-500", "arm,mmu-500"; - reg = <0x0 0x3da0000 0x0 0x20000>; - #iommu-cells = <2>; - #global-interrupts = <2>; - - interrupts = , - , - , - , - , - , - , - , - , - , - , - ; - - clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, - <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, - <&gpucc GPU_CC_AHB_CLK>, - <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, - <&gpucc GPU_CC_CX_GMU_CLK>, - <&gpucc GPU_CC_HUB_CX_INT_CLK>, - <&gpucc GPU_CC_HUB_AON_CLK>; - - clock-names = "gcc_gpu_memnoc_gfx_clk", - "gcc_gpu_snoc_dvm_gfx_clk", - "gpu_cc_ahb_clk", - "gpu_cc_hlos1_vote_gpu_smmu_clk", - "gpu_cc_cx_gmu_clk", - "gpu_cc_hub_cx_int_clk", - "gpu_cc_hub_aon_clk"; - power-domains = <&gpucc GPU_CC_CX_GDSC>; - dma-coherent; - }; - - pmu@9091000 { - compatible = "qcom,qcs8300-llcc-bwmon", "qcom,sc7280-llcc-bwmon"; - reg = <0x0 0x9091000 0x0 0x1000>; - - interrupts = ; - - interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; - - operating-points-v2 = <&llcc_bwmon_opp_table>; - - llcc_bwmon_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-0 { - opp-peak-kBps = <762000>; - }; - - opp-1 { - opp-peak-kBps = <1720000>; - }; - - opp-2 { - opp-peak-kBps = <2086000>; - }; - - opp-3 { - opp-peak-kBps = <2601000>; - }; - - opp-4 { - opp-peak-kBps = <2929000>; - }; - - opp-5 { - opp-peak-kBps = <5931000>; - }; - - opp-6 { - opp-peak-kBps = <6515000>; - }; - - opp-7 { - opp-peak-kBps = <7984000>; - }; - - opp-8 { - opp-peak-kBps = <10437000>; - }; - - opp-9 { - opp-peak-kBps = <12195000>; - }; - }; - }; - - pmu@90b5400 { - compatible = "qcom,qcs8300-cpu-bwmon", "qcom,sdm845-bwmon"; - reg = <0x0 0x90b5400 0x0 0x600>; - interrupts = ; - interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>; - - operating-points-v2 = <&cpu_bwmon_opp_table>; - - cpu_bwmon_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-0 { - opp-peak-kBps = <9155000>; - }; - - opp-1 { - opp-peak-kBps = <12298000>; - }; - - opp-2 { - opp-peak-kBps = <14236000>; - }; - - opp-3 { - opp-peak-kBps = <16265000>; - }; - }; - }; - - pmu@90b6400 { - compatible = "qcom,qcs8300-cpu-bwmon", "qcom,sdm845-bwmon"; - reg = <0x0 0x90b6400 0x0 0x600>; - interrupts = ; - interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>; - - operating-points-v2 = <&cpu_bwmon_opp_table>; - }; - - dc_noc: interconnect@90e0000 { - compatible = "qcom,qcs8300-dc-noc"; - reg = <0x0 0x090e0000 0x0 0x5080>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - gem_noc: interconnect@9100000 { - compatible = "qcom,qcs8300-gem-noc"; - reg = <0x0 0x9100000 0x0 0xf7080>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - llcc: system-cache-controller@9200000 { - compatible = "qcom,qcs8300-llcc"; - reg = <0x0 0x09200000 0x0 0x80000>, - <0x0 0x09300000 0x0 0x80000>, - <0x0 0x09400000 0x0 0x80000>, - <0x0 0x09500000 0x0 0x80000>, - <0x0 0x09a00000 0x0 0x80000>; - reg-names = "llcc0_base", - "llcc1_base", - "llcc2_base", - "llcc3_base", - "llcc_broadcast_base"; - interrupts = ; - }; - - usb_1: usb@a600000 { - compatible = "qcom,qcs8300-dwc3", "qcom,snps-dwc3"; - reg = <0x0 0x0a600000 0x0 0xfc100>; - - clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MASTER_CLK>, - <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; - clock-names = "cfg_noc", - "core", - "iface", - "sleep", - "mock_utmi"; - - assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_MASTER_CLK>; - assigned-clock-rates = <19200000>, <200000000>; - - interrupts-extended = <&intc GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>, - <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>, - <&intc GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 14 IRQ_TYPE_EDGE_BOTH>, - <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 12 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "dwc_usb3", - "pwr_event", - "hs_phy_irq", - "dp_hs_phy_irq", - "dm_hs_phy_irq", - "ss_phy_irq"; - - power-domains = <&gcc GCC_USB30_PRIM_GDSC>; - required-opps = <&rpmhpd_opp_nom>; - - resets = <&gcc GCC_USB30_PRIM_BCR>; - interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "usb-ddr", "apps-usb"; - - iommus = <&apps_smmu 0x80 0x0>; - phys = <&usb_1_hsphy>, <&usb_qmpphy>; - phy-names = "usb2-phy", "usb3-phy"; - snps,dis_enblslpm_quirk; - snps,dis-u1-entry-quirk; - snps,dis-u2-entry-quirk; - snps,dis_u2_susphy_quirk; - snps,dis_u3_susphy_quirk; - - wakeup-source; - - status = "disabled"; - }; - - usb_2: usb@a400000 { - compatible = "qcom,qcs8300-dwc3", "qcom,snps-dwc3"; - reg = <0x0 0x0a400000 0x0 0xfc100>; - - clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>, - <&gcc GCC_USB20_MASTER_CLK>, - <&gcc GCC_AGGRE_USB2_PRIM_AXI_CLK>, - <&gcc GCC_USB20_SLEEP_CLK>, - <&gcc GCC_USB20_MOCK_UTMI_CLK>; - clock-names = "cfg_noc", - "core", - "iface", - "sleep", - "mock_utmi"; - - assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>, - <&gcc GCC_USB20_MASTER_CLK>; - assigned-clock-rates = <19200000>, <120000000>; - - interrupts-extended = <&intc GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>, - <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>, - <&intc GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 10 IRQ_TYPE_EDGE_BOTH>, - <&pdc 9 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "dwc_usb3", - "pwr_event", - "hs_phy_irq", - "dp_hs_phy_irq", - "dm_hs_phy_irq"; - - power-domains = <&gcc GCC_USB20_PRIM_GDSC>; - required-opps = <&rpmhpd_opp_nom>; - - resets = <&gcc GCC_USB20_PRIM_BCR>; - - interconnects = <&aggre1_noc MASTER_USB2 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_USB2 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "usb-ddr", "apps-usb"; - - iommus = <&apps_smmu 0x20 0x0>; - - phys = <&usb_2_hsphy>; - phy-names = "usb2-phy"; - maximum-speed = "high-speed"; - - snps,dis-u1-entry-quirk; - snps,dis-u2-entry-quirk; - snps,dis_u2_susphy_quirk; - snps,dis_u3_susphy_quirk; - snps,dis_enblslpm_quirk; - - qcom,select-utmi-as-pipe-clk; - wakeup-source; - - status = "disabled"; - }; - - iris: video-codec@aa00000 { - compatible = "qcom,qcs8300-iris"; - - reg = <0x0 0x0aa00000 0x0 0xf0000>; - interrupts = ; - - power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>, - <&videocc VIDEO_CC_MVS0_GDSC>, - <&rpmhpd RPMHPD_MX>, - <&rpmhpd RPMHPD_MMCX>; - power-domain-names = "venus", - "vcodec0", - "mxc", - "mmcx"; - - operating-points-v2 = <&iris_opp_table>; - - clocks = <&gcc GCC_VIDEO_AXI0_CLK>, - <&videocc VIDEO_CC_MVS0C_CLK>, - <&videocc VIDEO_CC_MVS0_CLK>; - clock-names = "iface", - "core", - "vcodec0_core"; - - interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>, - <&mmss_noc MASTER_VIDEO_P0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "cpu-cfg", - "video-mem"; - - memory-region = <&video_mem>; - - resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>; - reset-names = "bus"; - - iommus = <&apps_smmu 0x0880 0x0400>, - <&apps_smmu 0x0887 0x0400>; - dma-coherent; - - status = "disabled"; - - iris_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-366000000 { - opp-hz = /bits/ 64 <366000000>; - required-opps = <&rpmhpd_opp_svs_l1>, - <&rpmhpd_opp_svs_l1>; - }; - - opp-444000000 { - opp-hz = /bits/ 64 <444000000>; - required-opps = <&rpmhpd_opp_nom>, - <&rpmhpd_opp_nom>; - }; - - opp-533000000 { - opp-hz = /bits/ 64 <533000000>; - required-opps = <&rpmhpd_opp_turbo>, - <&rpmhpd_opp_turbo>; - }; - - opp-560000000 { - opp-hz = /bits/ 64 <560000000>; - required-opps = <&rpmhpd_opp_turbo_l1>, - <&rpmhpd_opp_turbo_l1>; - }; - }; - }; - - videocc: clock-controller@abf0000 { - compatible = "qcom,qcs8300-videocc"; - reg = <0x0 0x0abf0000 0x0 0x10000>; - clocks = <&gcc GCC_VIDEO_AHB_CLK>, - <&rpmhcc RPMH_CXO_CLK>, - <&rpmhcc RPMH_CXO_CLK_A>, - <&sleep_clk>; - power-domains = <&rpmhpd RPMHPD_MMCX>; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; - - camcc: clock-controller@ade0000 { - compatible = "qcom,qcs8300-camcc"; - reg = <0x0 0x0ade0000 0x0 0x20000>; - clocks = <&gcc GCC_CAMERA_AHB_CLK>, - <&rpmhcc RPMH_CXO_CLK>, - <&rpmhcc RPMH_CXO_CLK_A>, - <&sleep_clk>; - power-domains = <&rpmhpd RPMHPD_MMCX>; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; - - dispcc: clock-controller@af00000 { - compatible = "qcom,sa8775p-dispcc0"; - reg = <0x0 0x0af00000 0x0 0x20000>; - clocks = <&gcc GCC_DISP_AHB_CLK>, - <&rpmhcc RPMH_CXO_CLK>, - <&rpmhcc RPMH_CXO_CLK_A>, - <&sleep_clk>, - <0>, <0>, <0>, <0>, - <0>, <0>, <0>, <0>; - power-domains = <&rpmhpd RPMHPD_MMCX>; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; - - pdc: interrupt-controller@b220000 { - compatible = "qcom,qcs8300-pdc", "qcom,pdc"; - reg = <0x0 0xb220000 0x0 0x30000>, - <0x0 0x17c000f0 0x0 0x64>; - interrupt-parent = <&intc>; - #interrupt-cells = <2>; - interrupt-controller; - qcom,pdc-ranges = <0 480 40>, - <40 140 14>, - <54 263 1>, - <55 306 4>, - <59 312 3>, - <62 374 2>, - <64 434 2>, - <66 438 2>, - <70 520 1>, - <73 523 1>, - <118 568 6>, - <124 609 3>, - <159 638 1>, - <160 720 3>, - <169 728 30>, - <199 416 2>, - <201 449 1>, - <202 89 1>, - <203 451 1>, - <204 462 1>, - <205 264 1>, - <206 579 1>, - <207 653 1>, - <208 656 1>, - <209 659 1>, - <210 122 1>, - <211 699 1>, - <212 705 1>, - <213 450 1>, - <214 643 2>, - <216 646 5>, - <221 390 5>, - <226 700 2>, - <228 440 1>, - <229 663 1>, - <230 524 2>, - <232 612 3>, - <235 723 5>; - }; - - aoss_qmp: power-management@c300000 { - compatible = "qcom,qcs8300-aoss-qmp", "qcom,aoss-qmp"; - reg = <0x0 0x0c300000 0x0 0x400>; - interrupts-extended = <&ipcc IPCC_CLIENT_AOP - IPCC_MPROC_SIGNAL_GLINK_QMP - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; - #clock-cells = <0>; - }; - - sram@c3f0000 { - compatible = "qcom,rpmh-stats"; - reg = <0x0 0x0c3f0000 0x0 0x400>; - }; - - spmi_bus: spmi@c440000 { - compatible = "qcom,spmi-pmic-arb"; - reg = <0x0 0x0c440000 0x0 0x1100>, - <0x0 0x0c600000 0x0 0x2000000>, - <0x0 0x0e600000 0x0 0x100000>, - <0x0 0x0e700000 0x0 0xa0000>, - <0x0 0x0c40a000 0x0 0x26000>; - reg-names = "core", - "chnls", - "obsrvr", - "intr", - "cnfg"; - qcom,channel = <0>; - qcom,ee = <0>; - interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "periph_irq"; - interrupt-controller; - #interrupt-cells = <4>; - #address-cells = <2>; - #size-cells = <0>; - }; - - tlmm: pinctrl@f100000 { - compatible = "qcom,qcs8300-tlmm"; - reg = <0x0 0x0f100000 0x0 0x300000>; - interrupts = ; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&tlmm 0 0 134>; - interrupt-controller; - #interrupt-cells = <2>; - wakeup-parent = <&pdc>; - - hs0_mi2s_active: hs0-mi2s-active-state { - pins = "gpio106", "gpio107", "gpio108", "gpio109"; - function = "hs0_mi2s"; - drive-strength = <8>; - bias-disable; - }; - - mi2s1_active: mi2s1-active-state { - data0-pins { - pins = "gpio100"; - function = "mi2s1_data0"; - drive-strength = <8>; - bias-disable; - }; - - data1-pins { - pins = "gpio101"; - function = "mi2s1_data1"; - drive-strength = <8>; - bias-disable; - }; - - sclk-pins { - pins = "gpio98"; - function = "mi2s1_sck"; - drive-strength = <8>; - bias-disable; - }; - - ws-pins { - pins = "gpio99"; - function = "mi2s1_ws"; - drive-strength = <8>; - bias-disable; - }; - }; - - qup_i2c0_data_clk: qup-i2c0-data-clk-state { - pins = "gpio17", "gpio18"; - function = "qup0_se0"; - }; - - qup_i2c1_data_clk: qup-i2c1-data-clk-state { - pins = "gpio19", "gpio20"; - function = "qup0_se1"; - }; - - qup_i2c2_data_clk: qup-i2c2-data-clk-state { - pins = "gpio33", "gpio34"; - function = "qup0_se2"; - }; - - qup_i2c3_data_clk: qup-i2c3-data-clk-state { - pins = "gpio25", "gpio26"; - function = "qup0_se3"; - }; - - qup_i2c4_data_clk: qup-i2c4-data-clk-state { - pins = "gpio29", "gpio30"; - function = "qup0_se4"; - }; - - qup_i2c5_data_clk: qup-i2c5-data-clk-state { - pins = "gpio21", "gpio22"; - function = "qup0_se5"; - }; - - qup_i2c6_data_clk: qup-i2c6-data-clk-state { - pins = "gpio80", "gpio81"; - function = "qup0_se6"; - }; - - qup_i2c8_data_clk: qup-i2c8-data-clk-state { - pins = "gpio37", "gpio38"; - function = "qup1_se0"; - }; - - qup_i2c9_data_clk: qup-i2c9-data-clk-state { - pins = "gpio39", "gpio40"; - function = "qup1_se1"; - }; - - qup_i2c10_data_clk: qup-i2c10-data-clk-state { - pins = "gpio84", "gpio85"; - function = "qup1_se2"; - }; - - qup_i2c11_data_clk: qup-i2c11-data-clk-state { - pins = "gpio41", "gpio42"; - function = "qup1_se3"; - }; - - qup_i2c12_data_clk: qup-i2c12-data-clk-state { - pins = "gpio45", "gpio46"; - function = "qup1_se4"; - }; - - qup_i2c13_data_clk: qup-i2c13-data-clk-state { - pins = "gpio49", "gpio50"; - function = "qup1_se5"; - }; - - qup_i2c14_data_clk: qup-i2c14-data-clk-state { - pins = "gpio89", "gpio90"; - function = "qup1_se6"; - }; - - qup_i2c15_data_clk: qup-i2c15-data-clk-state { - pins = "gpio91", "gpio92"; - function = "qup1_se7"; - }; - - qup_i2c16_data_clk: qup-i2c16-data-clk-state { - pins = "gpio10", "gpio11"; - function = "qup2_se0"; - }; - - qup_spi0_data_clk: qup-spi0-data-clk-state { - pins = "gpio17", "gpio18", "gpio19"; - function = "qup0_se0"; - }; - - qup_spi0_cs: qup-spi0-cs-state { - pins = "gpio20"; - function = "qup0_se0"; - }; - - qup_spi0_cs_gpio: qup-spi0-cs-gpio-state { - pins = "gpio20"; - function = "gpio"; - }; - - qup_spi1_data_clk: qup-spi1-data-clk-state { - pins = "gpio19", "gpio20", "gpio17"; - function = "qup0_se1"; - }; - - qup_spi1_cs: qup-spi1-cs-state { - pins = "gpio18"; - function = "qup0_se1"; - }; - - qup_spi1_cs_gpio: qup-spi1-cs-gpio-state { - pins = "gpio18"; - function = "gpio"; - }; - - qup_spi2_data_clk: qup-spi2-data-clk-state { - pins = "gpio33", "gpio34", "gpio35"; - function = "qup0_se2"; - }; - - qup_spi2_cs: qup-spi2-cs-state { - pins = "gpio36"; - function = "qup0_se2"; - }; - - qup_spi2_cs_gpio: qup-spi2-cs-gpio-state { - pins = "gpio36"; - function = "gpio"; - }; - - qup_spi3_data_clk: qup-spi3-data-clk-state { - pins = "gpio25", "gpio26", "gpio27"; - function = "qup0_se3"; - }; - - qup_spi3_cs: qup-spi3-cs-state { - pins = "gpio28"; - function = "qup0_se3"; - }; - - qup_spi3_cs_gpio: qup-spi3-cs-gpio-state { - pins = "gpio28"; - function = "gpio"; - }; - - qup_spi4_data_clk: qup-spi4-data-clk-state { - pins = "gpio29", "gpio30", "gpio31"; - function = "qup0_se4"; - }; - - qup_spi4_cs: qup-spi4-cs-state { - pins = "gpio32"; - function = "qup0_se4"; - }; - - qup_spi4_cs_gpio: qup-spi4-cs-gpio-state { - pins = "gpio32"; - function = "gpio"; - }; - - qup_spi5_data_clk: qup-spi5-data-clk-state { - pins = "gpio21", "gpio22", "gpio23"; - function = "qup0_se5"; - }; - - qup_spi5_cs: qup-spi5-cs-state { - pins = "gpio24"; - function = "qup0_se5"; - }; - - qup_spi5_cs_gpio: qup-spi5-cs-gpio-state { - pins = "gpio24"; - function = "gpio"; - }; - - qup_spi6_data_clk: qup-spi6-data-clk-state { - pins = "gpio80", "gpio81", "gpio82"; - function = "qup0_se6"; - }; - - qup_spi6_cs: qup-spi6-cs-state { - pins = "gpio83"; - function = "qup0_se6"; - }; - - qup_spi6_cs_gpio: qup-spi6-cs-gpio-state { - pins = "gpio83"; - function = "gpio"; - }; - - qup_spi8_data_clk: qup-spi8-data-clk-state { - pins = "gpio37", "gpio38", "gpio39"; - function = "qup1_se0"; - }; - - qup_spi8_cs: qup-spi8-cs-state { - pins = "gpio40"; - function = "qup1_se0"; - }; - - qup_spi8_cs_gpio: qup-spi8-cs-gpio-state { - pins = "gpio40"; - function = "gpio"; - }; - - qup_spi9_data_clk: qup-spi9-data-clk-state { - pins = "gpio39", "gpio40", "gpio37"; - function = "qup1_se1"; - }; - - qup_spi9_cs: qup-spi9-cs-state { - pins = "gpio38"; - function = "qup1_se1"; - }; - - qup_spi9_cs_gpio: qup-spi9-cs-gpio-state { - pins = "gpio38"; - function = "gpio"; - }; - - qup_spi10_data_clk: qup-spi10-data-clk-state { - pins = "gpio84", "gpio85", "gpio86"; - function = "qup1_se2"; - }; - - qup_spi10_cs: qup-spi10-cs-state { - pins = "gpio87"; - function = "qup1_se2"; - }; - - qup_spi10_cs_gpio: qup-spi10-cs-gpio-state { - pins = "gpio87"; - function = "gpio"; - }; - - qup_spi12_data_clk: qup-spi12-data-clk-state { - pins = "gpio45", "gpio46", "gpio47"; - function = "qup1_se4"; - }; - - qup_spi12_cs: qup-spi12-cs-state { - pins = "gpio48"; - function = "qup1_se4"; - }; - - qup_spi12_cs_gpio: qup-spi12-cs-gpio-state { - pins = "gpio48"; - function = "gpio"; - }; - - qup_spi13_data_clk: qup-spi13-data-clk-state { - pins = "gpio49", "gpio50", "gpio51"; - function = "qup1_se5"; - }; - - qup_spi13_cs: qup-spi13-cs-state { - pins = "gpio52"; - function = "qup1_se5"; - }; - - qup_spi13_cs_gpio: qup-spi13-cs-gpio-state { - pins = "gpio52"; - function = "gpio"; - }; - - qup_spi14_data_clk: qup-spi14-data-clk-state { - pins = "gpio89", "gpio90", "gpio91"; - function = "qup1_se6"; - }; - - qup_spi14_cs: qup-spi14-cs-state { - pins = "gpio92"; - function = "qup1_se6"; - }; - - qup_spi14_cs_gpio: qup-spi14-cs-gpio-state { - pins = "gpio92"; - function = "gpio"; - }; - - qup_spi15_data_clk: qup-spi15-data-clk-state { - pins = "gpio91", "gpio92", "gpio89"; - function = "qup1_se7"; - }; - - qup_spi15_cs: qup-spi15-cs-state { - pins = "gpio90"; - function = "qup1_se7"; - }; - - qup_spi15_cs_gpio: qup-spi15-cs-gpio-state { - pins = "gpio90"; - function = "gpio"; - }; - - qup_spi16_data_clk: qup-spi16-data-clk-state { - pins = "gpio10", "gpio11", "gpio12"; - function = "qup2_se0"; - }; - - qup_spi16_cs: qup-spi16-cs-state { - pins = "gpio13"; - function = "qup2_se0"; - }; - - qup_spi16_cs_gpio: qup-spi16-cs-gpio-state { - pins = "gpio13"; - function = "gpio"; - }; - - qup_uart0_cts: qup-uart0-cts-state { - pins = "gpio17"; - function = "qup0_se0"; - }; - - qup_uart0_rts: qup-uart0-rts-state { - pins = "gpio18"; - function = "qup0_se0"; - }; - - qup_uart0_tx: qup-uart0-tx-state { - pins = "gpio19"; - function = "qup0_se0"; - }; - - qup_uart0_rx: qup-uart0-rx-state { - pins = "gpio20"; - function = "qup0_se0"; - }; - - qup_uart1_cts: qup-uart1-cts-state { - pins = "gpio19"; - function = "qup0_se1"; - }; - - qup_uart1_rts: qup-uart1-rts-state { - pins = "gpio20"; - function = "qup0_se1"; - }; - - qup_uart1_tx: qup-uart1-tx-state { - pins = "gpio17"; - function = "qup0_se1"; - }; - - qup_uart1_rx: qup-uart1-rx-state { - pins = "gpio18"; - function = "qup0_se1"; - }; - - qup_uart2_cts: qup-uart2-cts-state { - pins = "gpio33"; - function = "qup0_se2"; - }; - - qup_uart2_rts: qup-uart2-rts-state { - pins = "gpio34"; - function = "qup0_se2"; - }; - - qup_uart2_tx: qup-uart2-tx-state { - pins = "gpio35"; - function = "qup0_se2"; - }; - - qup_uart2_rx: qup-uart2-rx-state { - pins = "gpio36"; - function = "qup0_se2"; - }; - - qup_uart3_cts: qup-uart3-cts-state { - pins = "gpio25"; - function = "qup0_se3"; - }; - - qup_uart3_rts: qup-uart3-rts-state { - pins = "gpio26"; - function = "qup0_se3"; - }; - - qup_uart3_tx: qup-uart3-tx-state { - pins = "gpio27"; - function = "qup0_se3"; - }; - - qup_uart3_rx: qup-uart3-rx-state { - pins = "gpio28"; - function = "qup0_se3"; - }; - - qup_uart4_cts: qup-uart4-cts-state { - pins = "gpio29"; - function = "qup0_se4"; - }; - - qup_uart4_rts: qup-uart4-rts-state { - pins = "gpio30"; - function = "qup0_se4"; - }; - - qup_uart4_tx: qup-uart4-tx-state { - pins = "gpio31"; - function = "qup0_se4"; - }; - - qup_uart4_rx: qup-uart4-rx-state { - pins = "gpio32"; - function = "qup0_se4"; - }; - - qup_uart5_cts: qup-uart5-cts-state { - pins = "gpio21"; - function = "qup0_se5"; - }; - - qup_uart5_rts: qup-uart5-rts-state { - pins = "gpio22"; - function = "qup0_se5"; - }; - - qup_uart5_tx: qup-uart5-tx-state { - pins = "gpio23"; - function = "qup0_se5"; - }; - - qup_uart5_rx: qup-uart5-rx-state { - pins = "gpio23"; - function = "qup0_se5"; - }; - - qup_uart6_cts: qup-uart6-cts-state { - pins = "gpio80"; - function = "qup0_se6"; - }; - - qup_uart6_rts: qup-uart6-rts-state { - pins = "gpio81"; - function = "qup0_se6"; - }; - - qup_uart6_tx: qup-uart6-tx-state { - pins = "gpio82"; - function = "qup0_se6"; - }; - - qup_uart6_rx: qup-uart6-rx-state { - pins = "gpio83"; - function = "qup0_se6"; - }; - - qup_uart7_tx: qup-uart7-tx-state { - pins = "gpio43"; - function = "qup0_se7"; - }; - - qup_uart7_rx: qup-uart7-rx-state { - pins = "gpio44"; - function = "qup0_se7"; - }; - - qup_uart8_cts: qup-uart8-cts-state { - pins = "gpio37"; - function = "qup1_se0"; - }; - - qup_uart8_rts: qup-uart8-rts-state { - pins = "gpio38"; - function = "qup1_se0"; - }; - - qup_uart8_tx: qup-uart8-tx-state { - pins = "gpio39"; - function = "qup1_se0"; - }; - - qup_uart8_rx: qup-uart8-rx-state { - pins = "gpio40"; - function = "qup1_se0"; - }; - - qup_uart9_cts: qup-uart9-cts-state { - pins = "gpio39"; - function = "qup1_se1"; - }; - - qup_uart9_rts: qup-uart9-rts-state { - pins = "gpio40"; - function = "qup1_se1"; - }; - - qup_uart9_tx: qup-uart9-tx-state { - pins = "gpio37"; - function = "qup1_se1"; - }; - - qup_uart9_rx: qup-uart9-rx-state { - pins = "gpio38"; - function = "qup1_se1"; - }; - - qup_uart10_cts: qup-uart10-cts-state { - pins = "gpio84"; - function = "qup1_se2"; - }; - - qup_uart10_rts: qup-uart10-rts-state { - pins = "gpio84"; - function = "qup1_se2"; - }; - - qup_uart10_tx: qup-uart10-tx-state { - pins = "gpio85"; - function = "qup1_se2"; - }; - - qup_uart10_rx: qup-uart10-rx-state { - pins = "gpio87"; - function = "qup1_se2"; - }; - - qup_uart11_tx: qup-uart11-tx-state { - pins = "gpio41"; - function = "qup1_se3"; - }; - - qup_uart11_rx: qup-uart11-rx-state { - pins = "gpio42"; - function = "qup1_se3"; - }; - - qup_uart12_cts: qup-uart12-cts-state { - pins = "gpio45"; - function = "qup1_se4"; - }; - - qup_uart12_rts: qup-uart12-rts-state { - pins = "gpio46"; - function = "qup1_se4"; - }; - - qup_uart12_tx: qup-uart12-tx-state { - pins = "gpio47"; - function = "qup1_se4"; - }; - - qup_uart12_rx: qup-uart12-rx-state { - pins = "gpio48"; - function = "qup1_se4"; - }; - - qup_uart13_cts: qup-uart13-cts-state { - pins = "gpio49"; - function = "qup1_se5"; - }; - - qup_uart13_rts: qup-uart13-rts-state { - pins = "gpio50"; - function = "qup1_se5"; - }; - - qup_uart13_tx: qup-uart13-tx-state { - pins = "gpio51"; - function = "qup1_se5"; - }; - - qup_uart13_rx: qup-uart13-rx-state { - pins = "gpio52"; - function = "qup1_se5"; - }; - - qup_uart14_cts: qup-uart14-cts-state { - pins = "gpio89"; - function = "qup1_se6"; - }; - - qup_uart14_rts: qup-uart14-rts-state { - pins = "gpio90"; - function = "qup1_se6"; - }; - - qup_uart14_tx: qup-uart14-tx-state { - pins = "gpio91"; - function = "qup1_se6"; - }; - - qup_uart14_rx: qup-uart14-rx-state { - pins = "gpio92"; - function = "qup1_se6"; - }; - - qup_uart15_cts: qup-uart15-cts-state { - pins = "gpio91"; - function = "qup1_se7"; - }; - - qup_uart15_rts: qup-uart15-rts-state { - pins = "gpio92"; - function = "qup1_se7"; - }; - - qup_uart15_tx: qup-uart15-tx-state { - pins = "gpio89"; - function = "qup1_se7"; - }; - - qup_uart15_rx: qup-uart15-rx-state { - pins = "gpio90"; - function = "qup1_se7"; - }; - - qup_uart16_cts: qup-uart16-cts-state { - pins = "gpio10"; - function = "qup2_se0"; - }; - - qup_uart16_rts: qup-uart16-rts-state { - pins = "gpio11"; - function = "qup2_se0"; - }; - - qup_uart16_tx: qup-uart16-tx-state { - pins = "gpio12"; - function = "qup2_se0"; - }; - - qup_uart16_rx: qup-uart16-rx-state { - pins = "gpio13"; - function = "qup2_se0"; - }; - - sdc1_state_on: sdc1-on-state { - clk-pins { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-pins { - pins = "sdc1_cmd"; - drive-strength = <10>; - bias-pull-up; - }; - - data-pins { - pins = "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - - rclk-pins { - pins = "sdc1_rclk"; - bias-pull-down; - }; - }; - - sdc1_state_off: sdc1-off-state { - clk-pins { - pins = "sdc1_clk"; - drive-strength = <2>; - bias-bus-hold; - }; - - cmd-pins { - pins = "sdc1_cmd"; - drive-strength = <2>; - bias-bus-hold; - }; - - data-pins { - pins = "sdc1_data"; - drive-strength = <2>; - bias-bus-hold; - }; - - rclk-pins { - pins = "sdc1_rclk"; - bias-bus-hold; - }; - }; - }; - - sram: sram@146d8000 { - compatible = "qcom,qcs8300-imem", "syscon", "simple-mfd"; - reg = <0x0 0x146d8000 0x0 0x1000>; - ranges = <0x0 0x0 0x146d8000 0x1000>; - - #address-cells = <1>; - #size-cells = <1>; - - pil-reloc@94c { - compatible = "qcom,pil-reloc-info"; - reg = <0x94c 0xc8>; - }; - }; - - apps_smmu: iommu@15000000 { - compatible = "qcom,qcs8300-smmu-500", "qcom,smmu-500", "arm,mmu-500"; - - reg = <0x0 0x15000000 0x0 0x100000>; - #iommu-cells = <2>; - #global-interrupts = <2>; - dma-coherent; - - interrupts = , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - ; - }; - - pcie_smmu: iommu@15200000 { - compatible = "qcom,qcs8300-smmu-500", "qcom,smmu-500", "arm,mmu-500"; - reg = <0x0 0x15200000 0x0 0x80000>; - #iommu-cells = <2>; - #global-interrupts = <2>; - dma-coherent; - - interrupts = , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - ; - }; - - intc: interrupt-controller@17a00000 { - compatible = "arm,gic-v3"; - reg = <0x0 0x17a00000 0x0 0x10000>, - <0x0 0x17a60000 0x0 0x100000>; - interrupts = ; - #interrupt-cells = <3>; - interrupt-controller; - #redistributor-regions = <1>; - redistributor-stride = <0x0 0x20000>; - }; - - watchdog@17c10000 { - compatible = "qcom,apss-wdt-qcs8300", "qcom,kpss-wdt"; - reg = <0x0 0x17c10000 0x0 0x1000>; - clocks = <&sleep_clk>; - interrupts = ; - }; - - timer@17c20000 { - compatible = "arm,armv7-timer-mem"; - reg = <0x0 0x17c20000 0x0 0x1000>; - ranges = <0x0 0x0 0x0 0x20000000>; - #address-cells = <1>; - #size-cells = <1>; - - frame@17c21000 { - reg = <0x17c21000 0x1000>, - <0x17c22000 0x1000>; - frame-number = <0>; - interrupts = , - ; - }; - - frame@17c23000 { - reg = <0x17c23000 0x1000>; - frame-number = <1>; - interrupts = ; - status = "disabled"; - }; - - frame@17c25000 { - reg = <0x17c25000 0x1000>; - frame-number = <2>; - interrupts = ; - status = "disabled"; - }; - - frame@17c27000 { - reg = <0x17c27000 0x1000>; - frame-number = <3>; - interrupts = ; - status = "disabled"; - }; - - frame@17c29000 { - reg = <0x17c29000 0x1000>; - frame-number = <4>; - interrupts = ; - status = "disabled"; - }; - - frame@17c2b000 { - reg = <0x17c2b000 0x1000>; - frame-number = <5>; - interrupts = ; - status = "disabled"; - }; - - frame@17c2d000 { - reg = <0x17c2d000 0x1000>; - frame-number = <6>; - interrupts = ; - status = "disabled"; - }; - }; - - apps_rsc: rsc@18200000 { - compatible = "qcom,rpmh-rsc"; - reg = <0x0 0x18200000 0x0 0x10000>, - <0x0 0x18210000 0x0 0x10000>, - <0x0 0x18220000 0x0 0x10000>; - reg-names = "drv-0", - "drv-1", - "drv-2"; - interrupts = , - , - ; - - power-domains = <&system_pd>; - label = "apps_rsc"; - - qcom,tcs-offset = <0xd00>; - qcom,drv-id = <2>; - qcom,tcs-config = , - , - , - ; - - apps_bcm_voter: bcm-voter { - compatible = "qcom,bcm-voter"; - }; - - rpmhcc: clock-controller { - compatible = "qcom,sa8775p-rpmh-clk"; - #clock-cells = <1>; - clocks = <&xo_board_clk>; - clock-names = "xo"; - }; - - rpmhpd: power-controller { - compatible = "qcom,qcs8300-rpmhpd"; - #power-domain-cells = <1>; - operating-points-v2 = <&rpmhpd_opp_table>; - - rpmhpd_opp_table: opp-table { - compatible = "operating-points-v2"; - - rpmhpd_opp_ret: opp-0 { - opp-level = ; - }; - - rpmhpd_opp_min_svs: opp-1 { - opp-level = ; - }; - - rpmhpd_opp_low_svs: opp-2 { - opp-level = ; - }; - - rpmhpd_opp_svs: opp-3 { - opp-level = ; - }; - - rpmhpd_opp_svs_l1: opp-4 { - opp-level = ; - }; - - rpmhpd_opp_nom: opp-5 { - opp-level = ; - }; - - rpmhpd_opp_nom_l1: opp-6 { - opp-level = ; - }; - - rpmhpd_opp_nom_l2: opp-7 { - opp-level = ; - }; - - rpmhpd_opp_turbo: opp-8 { - opp-level = ; - }; - - rpmhpd_opp_turbo_l1: opp-9 { - opp-level = ; - }; - }; - }; - }; - - epss_l3_cl0: interconnect@18590000 { - compatible = "qcom,qcs8300-epss-l3", "qcom,sa8775p-epss-l3", - "qcom,epss-l3"; - reg = <0x0 0x18590000 0x0 0x1000>; - clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; - clock-names = "xo", "alternate"; - #interconnect-cells = <1>; - }; - - cpufreq_hw: cpufreq@18591000 { - compatible = "qcom,qcs8300-cpufreq-epss", "qcom,cpufreq-epss"; - reg = <0x0 0x18591000 0x0 0x1000>, - <0x0 0x18593000 0x0 0x1000>, - <0x0 0x18594000 0x0 0x1000>; - reg-names = "freq-domain0", - "freq-domain1", - "freq-domain2"; - - interrupts = , - , - ; - interrupt-names = "dcvsh-irq-0", - "dcvsh-irq-1", - "dcvsh-irq-2"; - - clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; - clock-names = "xo", "alternate"; - - #freq-domain-cells = <1>; - }; - - epss_l3_cl1: interconnect@18592000 { - compatible = "qcom,qcs8300-epss-l3", "qcom,sa8775p-epss-l3", - "qcom,epss-l3"; - reg = <0x0 0x18592000 0x0 0x1000>; - clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; - clock-names = "xo", "alternate"; - #interconnect-cells = <1>; - }; - - remoteproc_gpdsp: remoteproc@20c00000 { - compatible = "qcom,qcs8300-gpdsp-pas", "qcom,sa8775p-gpdsp0-pas"; - reg = <0x0 0x20c00000 0x0 0x10000>; - - interrupts-extended = <&intc GIC_SPI 768 IRQ_TYPE_EDGE_RISING>, - <&smp2p_gpdsp_in 0 0>, - <&smp2p_gpdsp_in 1 0>, - <&smp2p_gpdsp_in 2 0>, - <&smp2p_gpdsp_in 3 0>; - interrupt-names = "wdog", - "fatal", - "ready", - "handover", - "stop-ack"; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; - - power-domains = <&rpmhpd RPMHPD_CX>, - <&rpmhpd RPMHPD_MXC>; - power-domain-names = "cx", - "mxc"; - - interconnects = <&gpdsp_anoc MASTER_DSP0 QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_CLK_CTL QCOM_ICC_TAG_ALWAYS>; - - memory-region = <&gpdsp_mem>; - - qcom,qmp = <&aoss_qmp>; - - qcom,smem-states = <&smp2p_gpdsp_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts-extended = <&ipcc IPCC_CLIENT_GPDSP0 - IPCC_MPROC_SIGNAL_GLINK_QMP - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_GPDSP0 - IPCC_MPROC_SIGNAL_GLINK_QMP>; - - label = "gpdsp"; - qcom,remote-pid = <17>; - }; - }; - - ethernet0: ethernet@23040000 { - compatible = "qcom,qcs8300-ethqos", "qcom,sa8775p-ethqos"; - reg = <0x0 0x23040000 0x0 0x00010000>, - <0x0 0x23056000 0x0 0x00000100>; - reg-names = "stmmaceth", "rgmii"; - - interrupts = , - ; - interrupt-names = "macirq", "sfty"; - - clocks = <&gcc GCC_EMAC0_AXI_CLK>, - <&gcc GCC_EMAC0_SLV_AHB_CLK>, - <&gcc GCC_EMAC0_PTP_CLK>, - <&gcc GCC_EMAC0_PHY_AUX_CLK>; - clock-names = "stmmaceth", - "pclk", - "ptp_ref", - "phyaux"; - power-domains = <&gcc GCC_EMAC0_GDSC>; - - phys = <&serdes0>; - phy-names = "serdes"; - - iommus = <&apps_smmu 0x120 0xf>; - dma-coherent; - - snps,tso; - snps,pbl = <32>; - rx-fifo-depth = <16384>; - tx-fifo-depth = <20480>; - - status = "disabled"; - }; - - nspa_noc: interconnect@260c0000 { - compatible = "qcom,qcs8300-nspa-noc"; - reg = <0x0 0x260c0000 0x0 0x16080>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - remoteproc_cdsp: remoteproc@26300000 { - compatible = "qcom,qcs8300-cdsp-pas", "qcom,sa8775p-cdsp0-pas"; - reg = <0x0 0x26300000 0x0 0x10000>; - - interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, - <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, - <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, - <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, - <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", - "fatal", - "ready", - "handover", - "stop-ack"; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; - - power-domains = <&rpmhpd RPMHPD_CX>, - <&rpmhpd RPMHPD_MXC>, - <&rpmhpd RPMHPD_NSP0>; - - power-domain-names = "cx", - "mxc", - "nsp"; - - interconnects = <&nspa_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - - memory-region = <&cdsp_mem>; - - qcom,qmp = <&aoss_qmp>; - - qcom,smem-states = <&smp2p_cdsp_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts-extended = <&ipcc IPCC_CLIENT_CDSP - IPCC_MPROC_SIGNAL_GLINK_QMP - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_CDSP - IPCC_MPROC_SIGNAL_GLINK_QMP>; - - label = "cdsp"; - qcom,remote-pid = <5>; - - fastrpc { - compatible = "qcom,fastrpc"; - qcom,glink-channels = "fastrpcglink-apps-dsp"; - label = "cdsp"; - #address-cells = <1>; - #size-cells = <0>; - - compute-cb@1 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <1>; - iommus = <&apps_smmu 0x19c1 0x0440>, - <&apps_smmu 0x1961 0x0400>; - dma-coherent; - }; - - compute-cb@2 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <2>; - iommus = <&apps_smmu 0x19c2 0x0440>, - <&apps_smmu 0x1962 0x0400>; - dma-coherent; - }; - - compute-cb@3 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <3>; - iommus = <&apps_smmu 0x19c3 0x0440>, - <&apps_smmu 0x1963 0x0400>; - dma-coherent; - }; - - compute-cb@4 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <4>; - iommus = <&apps_smmu 0x19c4 0x0440>, - <&apps_smmu 0x1964 0x0400>; - dma-coherent; - }; - }; - }; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = , - , - , - ; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts index 67ba508e92ba1f..1b9ca957a94b67 100644 --- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts +++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts @@ -7,7 +7,7 @@ #include #include -#include "qcm2290.dtsi" +#include "agatti.dtsi" #include "pm4125.dtsi" / { @@ -188,6 +188,53 @@ vph_pwr: regulator-vph-pwr { regulator-always-on; regulator-boot-on; }; + + sound { + compatible = "qcom,qrb2210-sndcard"; + pinctrl-0 = <&lpi_i2s2_active>; + pinctrl-names = "default"; + model = "Qualcomm-RB1-WSA8815-Speaker-DMIC0"; + + mm1-dai-link { + link-name = "MultiMedia1"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + hdmi-i2s-dai-link { + link-name = "HDMI/I2S Playback"; + + codec { + sound-dai = <<9611_codec 0>; + }; + + cpu { + sound-dai = <&q6afedai SECONDARY_MI2S_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + }; + }; }; &cpu_pd0 { @@ -214,10 +261,10 @@ &gpi_dma0 { &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/qcm2290/a702_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/qcm2290/a702_zap.mbn"; }; &i2c2_gpio { @@ -323,6 +370,14 @@ &pm4125_vbus { status = "okay"; }; +/* SECONDARY I2S uses 1 I2S SD Line for audio on LT9611UXC HDMI Bridge */ +&q6afedai { + dai@18 { + reg = ; + qcom,sd-lines = <0>; + }; +}; + &qupv3_id_0 { status = "okay"; }; @@ -649,7 +704,7 @@ key_volp_n: key-volp-n-state { &uart3 { /delete-property/ interrupts; interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, - <&tlmm 11 IRQ_TYPE_LEVEL_HIGH>; + <&tlmm 11 IRQ_TYPE_EDGE_FALLING>; pinctrl-0 = <&uart3_default>; pinctrl-1 = <&uart3_sleep>; pinctrl-names = "default", "sleep"; diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts index bdf2d66e40c625..0cd36c54632fa3 100644 --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts @@ -245,10 +245,10 @@ &gpi_dma0 { &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/qrb4210/a610_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/qrb4210/a610_zap.mbn"; }; &i2c2_gpio { diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index d99448a0732d9d..71b42e76f03d62 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -594,11 +594,10 @@ &gmu { &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sm8250/a650_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8250/a650_zap.mbn"; }; /* LS-I2C0 */ diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts index 64e59299672cbf..d28d6916242791 100644 --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts @@ -149,13 +149,6 @@ regulator-usb5-vbus { enable-active-high; regulator-always-on; }; - - reserved-memory { - gpu_mem: gpu-mem@8bf00000 { - reg = <0 0x8bf00000 0 0x2000>; - no-map; - }; - }; }; &apps_rsc { @@ -345,11 +338,10 @@ &gmu { &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sa8295p/a690_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sa8295p/a690_zap.mbn"; }; &gpu_smmu { diff --git a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts index ad342d8b7508c5..1514da63626982 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts @@ -31,7 +31,7 @@ chosen { }; reserved-memory { - zap_mem: zap-shader@80840000 { + gpu_mem: zap-shader@80840000 { reg = <0x0 0x80840000 0 0x2000>; no-map; }; @@ -426,11 +426,10 @@ panel_in_edp: endpoint { &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&zap_mem>; - firmware-name = "qcom/sc7180/acer/aspire1/qcdxkmsuc7180.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sc7180/acer/aspire1/qcdxkmsuc7180.mbn"; }; &mdss { diff --git a/arch/arm64/boot/dts/qcom/sc7180-el2.dtso b/arch/arm64/boot/dts/qcom/sc7180-el2.dtso index 49a98676ca4db2..6e8da59597b657 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-el2.dtso +++ b/arch/arm64/boot/dts/qcom/sc7180-el2.dtso @@ -8,10 +8,8 @@ /plugin/; /* We can't and don't need to use zap shader in EL2 as linux can zap the gpu on it's own. */ -&gpu { - zap-shader { - status = "disabled"; - }; +&gpu_zap_shader { + status = "disabled"; }; /* Venus can be used in EL2 if booted similarly to ChromeOS devices. */ diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts index 19cf419cf531f3..0bce3eefca2e9b 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts @@ -39,6 +39,7 @@ chosen { * */ +/delete-node/ &gpu_zap_shader; /delete-node/ &hyp_mem; /delete-node/ &xbl_mem; /delete-node/ &aop_mem; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 74ab321d3333cf..b398f69917f0e1 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -41,6 +41,7 @@ charger-crit { * required by the board dts. */ +/delete-node/ &gpu_zap_shader; /delete-node/ &hyp_mem; /delete-node/ &ipa_fw_mem; /delete-node/ &xbl_mem; diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index a0df10a97c7f8a..45b9864e3304b2 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -1474,6 +1474,12 @@ uart11: serial@a94000 { }; }; + refgen: regulator@ff1000 { + compatible = "qcom,sc7180-refgen-regulator", + "qcom,sdm845-refgen-regulator"; + reg = <0x0 0x00ff1000 0x0 0x60>; + }; + config_noc: interconnect@1500000 { compatible = "qcom,sc7180-config-noc"; reg = <0 0x01500000 0 0x28000>; @@ -2179,6 +2185,10 @@ gpu: gpu@5000000 { interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "gfx-mem"; + gpu_zap_shader: zap-shader { + memory-region = <&gpu_mem>; + }; + gpu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -3332,6 +3342,8 @@ mdss_dsi0: dsi@ae94000 { phys = <&mdss_dsi0_phy>; + refgen-supply = <&refgen>; + #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index ccd39a1baeda54..8cac4ce9c85153 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -7,7 +7,7 @@ #include #include -#include "sc7280.dtsi" +#include "kodiak.dtsi" #include "pm7325.dtsi" #include "pm8350c.dtsi" #include "pmk8350.dtsi" @@ -573,7 +573,7 @@ bluetooth: bluetooth { }; }; -/* PINCTRL - additions to nodes defined in sc7280.dtsi */ +/* PINCTRL - additions to nodes defined in kodiak.dtsi */ &dp_hot_plug_det { bias-disable; diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi index 7d1d5bbbbbd951..469a5d103e3db3 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi @@ -16,7 +16,7 @@ #include #include -#include "sc7280.dtsi" +#include "kodiak.dtsi" /* PMICs depend on spmi_bus label and so must come after SoC */ #include "pm7325.dtsi" diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi deleted file mode 100644 index 4b04dea57ec8cc..00000000000000 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ /dev/null @@ -1,7450 +0,0 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * sc7280 SoC device tree source - * - * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/ { - interrupt-parent = <&intc>; - - #address-cells = <2>; - #size-cells = <2>; - - chosen { }; - - aliases { - i2c0 = &i2c0; - i2c1 = &i2c1; - i2c2 = &i2c2; - i2c3 = &i2c3; - i2c4 = &i2c4; - i2c5 = &i2c5; - i2c6 = &i2c6; - i2c7 = &i2c7; - i2c8 = &i2c8; - i2c9 = &i2c9; - i2c10 = &i2c10; - i2c11 = &i2c11; - i2c12 = &i2c12; - i2c13 = &i2c13; - i2c14 = &i2c14; - i2c15 = &i2c15; - mmc1 = &sdhc_1; - mmc2 = &sdhc_2; - spi0 = &spi0; - spi1 = &spi1; - spi2 = &spi2; - spi3 = &spi3; - spi4 = &spi4; - spi5 = &spi5; - spi6 = &spi6; - spi7 = &spi7; - spi8 = &spi8; - spi9 = &spi9; - spi10 = &spi10; - spi11 = &spi11; - spi12 = &spi12; - spi13 = &spi13; - spi14 = &spi14; - spi15 = &spi15; - }; - - clocks { - xo_board: xo-board { - compatible = "fixed-clock"; - clock-frequency = <76800000>; - #clock-cells = <0>; - }; - - sleep_clk: sleep-clk { - compatible = "fixed-clock"; - clock-frequency = <32764>; - #clock-cells = <0>; - }; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - wlan_ce_mem: wlan-ce@4cd000 { - no-map; - reg = <0x0 0x004cd000 0x0 0x1000>; - }; - - hyp_mem: hyp@80000000 { - reg = <0x0 0x80000000 0x0 0x600000>; - no-map; - }; - - xbl_mem: xbl@80600000 { - reg = <0x0 0x80600000 0x0 0x200000>; - no-map; - }; - - aop_mem: aop@80800000 { - reg = <0x0 0x80800000 0x0 0x60000>; - no-map; - }; - - aop_cmd_db_mem: aop-cmd-db@80860000 { - reg = <0x0 0x80860000 0x0 0x20000>; - compatible = "qcom,cmd-db"; - no-map; - }; - - reserved_xbl_uefi_log: xbl-uefi-res@80880000 { - reg = <0x0 0x80884000 0x0 0x10000>; - no-map; - }; - - sec_apps_mem: sec-apps@808ff000 { - reg = <0x0 0x808ff000 0x0 0x1000>; - no-map; - }; - - smem_mem: smem@80900000 { - reg = <0x0 0x80900000 0x0 0x200000>; - no-map; - }; - - cpucp_mem: cpucp@80b00000 { - no-map; - reg = <0x0 0x80b00000 0x0 0x100000>; - }; - - wlan_fw_mem: wlan-fw@80c00000 { - reg = <0x0 0x80c00000 0x0 0xc00000>; - no-map; - }; - - adsp_mem: adsp@86700000 { - reg = <0x0 0x86700000 0x0 0x2800000>; - no-map; - }; - - video_mem: video@8b200000 { - reg = <0x0 0x8b200000 0x0 0x500000>; - no-map; - }; - - cdsp_mem: cdsp@88f00000 { - reg = <0x0 0x88f00000 0x0 0x1e00000>; - no-map; - }; - - ipa_fw_mem: ipa-fw@8b700000 { - reg = <0 0x8b700000 0 0x10000>; - no-map; - }; - - gpu_zap_mem: zap@8b71a000 { - reg = <0 0x8b71a000 0 0x2000>; - no-map; - }; - - mpss_mem: mpss@8b800000 { - reg = <0x0 0x8b800000 0x0 0xf600000>; - no-map; - }; - - wpss_mem: wpss@9ae00000 { - reg = <0x0 0x9ae00000 0x0 0x1900000>; - no-map; - }; - - rmtfs_mem: rmtfs@9c900000 { - compatible = "qcom,rmtfs-mem"; - reg = <0x0 0x9c900000 0x0 0x280000>; - no-map; - - qcom,client-id = <1>; - qcom,vmid = ; - }; - }; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "qcom,kryo"; - reg = <0x0 0x0>; - clocks = <&cpufreq_hw 0>; - enable-method = "psci"; - power-domains = <&cpu_pd0>; - power-domain-names = "psci"; - next-level-cache = <&l2_0>; - operating-points-v2 = <&cpu0_opp_table>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; - interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, - <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; - qcom,freq-domain = <&cpufreq_hw 0>; - #cooling-cells = <2>; - l2_0: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_0>; - l3_0: l3-cache { - compatible = "cache"; - cache-level = <3>; - cache-unified; - }; - }; - }; - - cpu1: cpu@100 { - device_type = "cpu"; - compatible = "qcom,kryo"; - reg = <0x0 0x100>; - clocks = <&cpufreq_hw 0>; - enable-method = "psci"; - power-domains = <&cpu_pd1>; - power-domain-names = "psci"; - next-level-cache = <&l2_100>; - operating-points-v2 = <&cpu0_opp_table>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; - interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, - <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; - qcom,freq-domain = <&cpufreq_hw 0>; - #cooling-cells = <2>; - l2_100: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_0>; - }; - }; - - cpu2: cpu@200 { - device_type = "cpu"; - compatible = "qcom,kryo"; - reg = <0x0 0x200>; - clocks = <&cpufreq_hw 0>; - enable-method = "psci"; - power-domains = <&cpu_pd2>; - power-domain-names = "psci"; - next-level-cache = <&l2_200>; - operating-points-v2 = <&cpu0_opp_table>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; - interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, - <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; - qcom,freq-domain = <&cpufreq_hw 0>; - #cooling-cells = <2>; - l2_200: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_0>; - }; - }; - - cpu3: cpu@300 { - device_type = "cpu"; - compatible = "qcom,kryo"; - reg = <0x0 0x300>; - clocks = <&cpufreq_hw 0>; - enable-method = "psci"; - power-domains = <&cpu_pd3>; - power-domain-names = "psci"; - next-level-cache = <&l2_300>; - operating-points-v2 = <&cpu0_opp_table>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; - interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, - <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; - qcom,freq-domain = <&cpufreq_hw 0>; - #cooling-cells = <2>; - l2_300: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_0>; - }; - }; - - cpu4: cpu@400 { - device_type = "cpu"; - compatible = "qcom,kryo"; - reg = <0x0 0x400>; - clocks = <&cpufreq_hw 1>; - enable-method = "psci"; - power-domains = <&cpu_pd4>; - power-domain-names = "psci"; - next-level-cache = <&l2_400>; - operating-points-v2 = <&cpu4_opp_table>; - capacity-dmips-mhz = <1946>; - dynamic-power-coefficient = <520>; - interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, - <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; - qcom,freq-domain = <&cpufreq_hw 1>; - #cooling-cells = <2>; - l2_400: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_0>; - }; - }; - - cpu5: cpu@500 { - device_type = "cpu"; - compatible = "qcom,kryo"; - reg = <0x0 0x500>; - clocks = <&cpufreq_hw 1>; - enable-method = "psci"; - power-domains = <&cpu_pd5>; - power-domain-names = "psci"; - next-level-cache = <&l2_500>; - operating-points-v2 = <&cpu4_opp_table>; - capacity-dmips-mhz = <1946>; - dynamic-power-coefficient = <520>; - interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, - <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; - qcom,freq-domain = <&cpufreq_hw 1>; - #cooling-cells = <2>; - l2_500: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_0>; - }; - }; - - cpu6: cpu@600 { - device_type = "cpu"; - compatible = "qcom,kryo"; - reg = <0x0 0x600>; - clocks = <&cpufreq_hw 1>; - enable-method = "psci"; - power-domains = <&cpu_pd6>; - power-domain-names = "psci"; - next-level-cache = <&l2_600>; - operating-points-v2 = <&cpu4_opp_table>; - capacity-dmips-mhz = <1946>; - dynamic-power-coefficient = <520>; - interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, - <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; - qcom,freq-domain = <&cpufreq_hw 1>; - #cooling-cells = <2>; - l2_600: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_0>; - }; - }; - - cpu7: cpu@700 { - device_type = "cpu"; - compatible = "qcom,kryo"; - reg = <0x0 0x700>; - clocks = <&cpufreq_hw 2>; - enable-method = "psci"; - power-domains = <&cpu_pd7>; - power-domain-names = "psci"; - next-level-cache = <&l2_700>; - operating-points-v2 = <&cpu7_opp_table>; - capacity-dmips-mhz = <1985>; - dynamic-power-coefficient = <552>; - interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, - <&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>; - qcom,freq-domain = <&cpufreq_hw 2>; - #cooling-cells = <2>; - l2_700: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_0>; - }; - }; - - cpu-map { - cluster0 { - core0 { - cpu = <&cpu0>; - }; - - core1 { - cpu = <&cpu1>; - }; - - core2 { - cpu = <&cpu2>; - }; - - core3 { - cpu = <&cpu3>; - }; - - core4 { - cpu = <&cpu4>; - }; - - core5 { - cpu = <&cpu5>; - }; - - core6 { - cpu = <&cpu6>; - }; - - core7 { - cpu = <&cpu7>; - }; - }; - }; - - idle-states { - entry-method = "psci"; - - little_cpu_sleep_0: cpu-sleep-0-0 { - compatible = "arm,idle-state"; - idle-state-name = "little-power-down"; - arm,psci-suspend-param = <0x40000003>; - entry-latency-us = <549>; - exit-latency-us = <901>; - min-residency-us = <1774>; - local-timer-stop; - }; - - little_cpu_sleep_1: cpu-sleep-0-1 { - compatible = "arm,idle-state"; - idle-state-name = "little-rail-power-down"; - arm,psci-suspend-param = <0x40000004>; - entry-latency-us = <702>; - exit-latency-us = <915>; - min-residency-us = <4001>; - local-timer-stop; - }; - - big_cpu_sleep_0: cpu-sleep-1-0 { - compatible = "arm,idle-state"; - idle-state-name = "big-power-down"; - arm,psci-suspend-param = <0x40000003>; - entry-latency-us = <523>; - exit-latency-us = <1244>; - min-residency-us = <2207>; - local-timer-stop; - }; - - big_cpu_sleep_1: cpu-sleep-1-1 { - compatible = "arm,idle-state"; - idle-state-name = "big-rail-power-down"; - arm,psci-suspend-param = <0x40000004>; - entry-latency-us = <526>; - exit-latency-us = <1854>; - min-residency-us = <5555>; - local-timer-stop; - }; - }; - - domain_idle_states: domain-idle-states { - cluster_sleep_apss_off: cluster-sleep-0 { - compatible = "domain-idle-state"; - arm,psci-suspend-param = <0x41000044>; - entry-latency-us = <2752>; - exit-latency-us = <3048>; - min-residency-us = <6118>; - }; - - cluster_sleep_cx_ret: cluster-sleep-1 { - compatible = "domain-idle-state"; - arm,psci-suspend-param = <0x41001344>; - entry-latency-us = <3263>; - exit-latency-us = <4562>; - min-residency-us = <8467>; - }; - - cluster_sleep_llcc_off: cluster-sleep-2 { - compatible = "domain-idle-state"; - arm,psci-suspend-param = <0x4100b344>; - entry-latency-us = <3638>; - exit-latency-us = <6562>; - min-residency-us = <9826>; - }; - }; - }; - - cpu0_opp_table: opp-table-cpu0 { - compatible = "operating-points-v2"; - opp-shared; - - cpu0_opp_300mhz: opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - opp-peak-kBps = <800000 9600000>; - }; - - cpu0_opp_691mhz: opp-691200000 { - opp-hz = /bits/ 64 <691200000>; - opp-peak-kBps = <800000 17817600>; - }; - - cpu0_opp_806mhz: opp-806400000 { - opp-hz = /bits/ 64 <806400000>; - opp-peak-kBps = <800000 20889600>; - }; - - cpu0_opp_941mhz: opp-940800000 { - opp-hz = /bits/ 64 <940800000>; - opp-peak-kBps = <1804000 24576000>; - }; - - cpu0_opp_1152mhz: opp-1152000000 { - opp-hz = /bits/ 64 <1152000000>; - opp-peak-kBps = <2188000 27033600>; - }; - - cpu0_opp_1325mhz: opp-1324800000 { - opp-hz = /bits/ 64 <1324800000>; - opp-peak-kBps = <2188000 33792000>; - }; - - cpu0_opp_1517mhz: opp-1516800000 { - opp-hz = /bits/ 64 <1516800000>; - opp-peak-kBps = <3072000 38092800>; - }; - - cpu0_opp_1651mhz: opp-1651200000 { - opp-hz = /bits/ 64 <1651200000>; - opp-peak-kBps = <3072000 41779200>; - }; - - cpu0_opp_1805mhz: opp-1804800000 { - opp-hz = /bits/ 64 <1804800000>; - opp-peak-kBps = <4068000 48537600>; - }; - - cpu0_opp_1958mhz: opp-1958400000 { - opp-hz = /bits/ 64 <1958400000>; - opp-peak-kBps = <4068000 48537600>; - }; - - cpu0_opp_2016mhz: opp-2016000000 { - opp-hz = /bits/ 64 <2016000000>; - opp-peak-kBps = <6220000 48537600>; - }; - }; - - cpu4_opp_table: opp-table-cpu4 { - compatible = "operating-points-v2"; - opp-shared; - - cpu4_opp_691mhz: opp-691200000 { - opp-hz = /bits/ 64 <691200000>; - opp-peak-kBps = <1804000 9600000>; - }; - - cpu4_opp_941mhz: opp-940800000 { - opp-hz = /bits/ 64 <940800000>; - opp-peak-kBps = <2188000 17817600>; - }; - - cpu4_opp_1229mhz: opp-1228800000 { - opp-hz = /bits/ 64 <1228800000>; - opp-peak-kBps = <4068000 24576000>; - }; - - cpu4_opp_1344mhz: opp-1344000000 { - opp-hz = /bits/ 64 <1344000000>; - opp-peak-kBps = <4068000 24576000>; - }; - - cpu4_opp_1517mhz: opp-1516800000 { - opp-hz = /bits/ 64 <1516800000>; - opp-peak-kBps = <4068000 24576000>; - }; - - cpu4_opp_1651mhz: opp-1651200000 { - opp-hz = /bits/ 64 <1651200000>; - opp-peak-kBps = <6220000 38092800>; - }; - - cpu4_opp_1901mhz: opp-1900800000 { - opp-hz = /bits/ 64 <1900800000>; - opp-peak-kBps = <6220000 44851200>; - }; - - cpu4_opp_2054mhz: opp-2054400000 { - opp-hz = /bits/ 64 <2054400000>; - opp-peak-kBps = <6220000 44851200>; - }; - - cpu4_opp_2112mhz: opp-2112000000 { - opp-hz = /bits/ 64 <2112000000>; - opp-peak-kBps = <6220000 44851200>; - }; - - cpu4_opp_2131mhz: opp-2131200000 { - opp-hz = /bits/ 64 <2131200000>; - opp-peak-kBps = <6220000 44851200>; - }; - - cpu4_opp_2208mhz: opp-2208000000 { - opp-hz = /bits/ 64 <2208000000>; - opp-peak-kBps = <6220000 44851200>; - }; - - cpu4_opp_2400mhz: opp-2400000000 { - opp-hz = /bits/ 64 <2400000000>; - opp-peak-kBps = <12787200 48537600>; - }; - - cpu4_opp_2611mhz: opp-2611200000 { - opp-hz = /bits/ 64 <2611200000>; - opp-peak-kBps = <12787200 48537600>; - }; - }; - - cpu7_opp_table: opp-table-cpu7 { - compatible = "operating-points-v2"; - opp-shared; - - cpu7_opp_806mhz: opp-806400000 { - opp-hz = /bits/ 64 <806400000>; - opp-peak-kBps = <1804000 9600000>; - }; - - cpu7_opp_1056mhz: opp-1056000000 { - opp-hz = /bits/ 64 <1056000000>; - opp-peak-kBps = <2188000 17817600>; - }; - - cpu7_opp_1325mhz: opp-1324800000 { - opp-hz = /bits/ 64 <1324800000>; - opp-peak-kBps = <4068000 24576000>; - }; - - cpu7_opp_1517mhz: opp-1516800000 { - opp-hz = /bits/ 64 <1516800000>; - opp-peak-kBps = <4068000 24576000>; - }; - - cpu7_opp_1766mhz: opp-1766400000 { - opp-hz = /bits/ 64 <1766400000>; - opp-peak-kBps = <6220000 38092800>; - }; - - cpu7_opp_1862mhz: opp-1862400000 { - opp-hz = /bits/ 64 <1862400000>; - opp-peak-kBps = <6220000 38092800>; - }; - - cpu7_opp_2035mhz: opp-2035200000 { - opp-hz = /bits/ 64 <2035200000>; - opp-peak-kBps = <6220000 38092800>; - }; - - cpu7_opp_2112mhz: opp-2112000000 { - opp-hz = /bits/ 64 <2112000000>; - opp-peak-kBps = <6220000 44851200>; - }; - - cpu7_opp_2208mhz: opp-2208000000 { - opp-hz = /bits/ 64 <2208000000>; - opp-peak-kBps = <6220000 44851200>; - }; - - cpu7_opp_2381mhz: opp-2380800000 { - opp-hz = /bits/ 64 <2380800000>; - opp-peak-kBps = <6832000 44851200>; - }; - - cpu7_opp_2400mhz: opp-2400000000 { - opp-hz = /bits/ 64 <2400000000>; - opp-peak-kBps = <12787200 48537600>; - }; - - cpu7_opp_2515mhz: opp-2515200000 { - opp-hz = /bits/ 64 <2515200000>; - opp-peak-kBps = <12787200 48537600>; - }; - - cpu7_opp_2707mhz: opp-2707200000 { - opp-hz = /bits/ 64 <2707200000>; - opp-peak-kBps = <12787200 48537600>; - }; - - cpu7_opp_3014mhz: opp-3014400000 { - opp-hz = /bits/ 64 <3014400000>; - opp-peak-kBps = <12787200 48537600>; - }; - }; - - memory@80000000 { - device_type = "memory"; - /* We expect the bootloader to fill in the size */ - reg = <0 0x80000000 0 0>; - }; - - firmware { - scm: scm { - compatible = "qcom,scm-sc7280", "qcom,scm"; - qcom,dload-mode = <&tcsr_2 0x13000>; - }; - }; - - clk_virt: interconnect { - compatible = "qcom,sc7280-clk-virt"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - smem { - compatible = "qcom,smem"; - memory-region = <&smem_mem>; - hwlocks = <&tcsr_mutex 3>; - }; - - smp2p-adsp { - compatible = "qcom,smp2p"; - qcom,smem = <443>, <429>; - interrupts-extended = <&ipcc IPCC_CLIENT_LPASS - IPCC_MPROC_SIGNAL_SMP2P - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_LPASS - IPCC_MPROC_SIGNAL_SMP2P>; - - qcom,local-pid = <0>; - qcom,remote-pid = <2>; - - adsp_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; - - adsp_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - smp2p-cdsp { - compatible = "qcom,smp2p"; - qcom,smem = <94>, <432>; - interrupts-extended = <&ipcc IPCC_CLIENT_CDSP - IPCC_MPROC_SIGNAL_SMP2P - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_CDSP - IPCC_MPROC_SIGNAL_SMP2P>; - - qcom,local-pid = <0>; - qcom,remote-pid = <5>; - - cdsp_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; - - cdsp_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - smp2p-mpss { - compatible = "qcom,smp2p"; - qcom,smem = <435>, <428>; - interrupts-extended = <&ipcc IPCC_CLIENT_MPSS - IPCC_MPROC_SIGNAL_SMP2P - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_MPSS - IPCC_MPROC_SIGNAL_SMP2P>; - - qcom,local-pid = <0>; - qcom,remote-pid = <1>; - - modem_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; - - modem_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - ipa_smp2p_out: ipa-ap-to-modem { - qcom,entry-name = "ipa"; - #qcom,smem-state-cells = <1>; - }; - - ipa_smp2p_in: ipa-modem-to-ap { - qcom,entry-name = "ipa"; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - smp2p-wpss { - compatible = "qcom,smp2p"; - qcom,smem = <617>, <616>; - interrupts-extended = <&ipcc IPCC_CLIENT_WPSS - IPCC_MPROC_SIGNAL_SMP2P - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_WPSS - IPCC_MPROC_SIGNAL_SMP2P>; - - qcom,local-pid = <0>; - qcom,remote-pid = <13>; - - wpss_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; - - wpss_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - wlan_smp2p_out: wlan-ap-to-wpss { - qcom,entry-name = "wlan"; - #qcom,smem-state-cells = <1>; - }; - - wlan_smp2p_in: wlan-wpss-to-ap { - qcom,entry-name = "wlan"; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - pmu-a55 { - compatible = "arm,cortex-a55-pmu"; - interrupts = ; - }; - - pmu-a78 { - compatible = "arm,cortex-a78-pmu"; - interrupts = ; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - - cpu_pd0: power-domain-cpu0 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd>; - domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; - }; - - cpu_pd1: power-domain-cpu1 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd>; - domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; - }; - - cpu_pd2: power-domain-cpu2 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd>; - domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; - }; - - cpu_pd3: power-domain-cpu3 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd>; - domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; - }; - - cpu_pd4: power-domain-cpu4 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd>; - domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>; - }; - - cpu_pd5: power-domain-cpu5 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd>; - domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>; - }; - - cpu_pd6: power-domain-cpu6 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd>; - domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>; - }; - - cpu_pd7: power-domain-cpu7 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd>; - domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>; - }; - - cluster_pd: power-domain-cluster { - #power-domain-cells = <0>; - domain-idle-states = <&cluster_sleep_apss_off &cluster_sleep_cx_ret &cluster_sleep_llcc_off>; - }; - }; - - qspi_opp_table: opp-table-qspi { - compatible = "operating-points-v2"; - - opp-75000000 { - opp-hz = /bits/ 64 <75000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-150000000 { - opp-hz = /bits/ 64 <150000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - - opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - - qup_opp_table: opp-table-qup { - compatible = "operating-points-v2"; - - opp-75000000 { - opp-hz = /bits/ 64 <75000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-128000000 { - opp-hz = /bits/ 64 <128000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - - soc: soc@0 { - #address-cells = <2>; - #size-cells = <2>; - ranges = <0 0 0 0 0x10 0>; - dma-ranges = <0 0 0 0 0x10 0>; - compatible = "simple-bus"; - - gcc: clock-controller@100000 { - compatible = "qcom,gcc-sc7280"; - reg = <0 0x00100000 0 0x1f0000>; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>, - <0>, <&pcie1_phy>, - <&ufs_mem_phy 0>, <&ufs_mem_phy 1>, <&ufs_mem_phy 2>, - <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; - clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", - "pcie_0_pipe_clk", "pcie_1_pipe_clk", - "ufs_phy_rx_symbol_0_clk", "ufs_phy_rx_symbol_1_clk", - "ufs_phy_tx_symbol_0_clk", - "usb3_phy_wrapper_gcc_usb30_pipe_clk"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - power-domains = <&rpmhpd SC7280_CX>; - }; - - ipcc: mailbox@408000 { - compatible = "qcom,sc7280-ipcc", "qcom,ipcc"; - reg = <0 0x00408000 0 0x1000>; - interrupts = ; - interrupt-controller; - #interrupt-cells = <3>; - #mbox-cells = <2>; - }; - - qfprom: efuse@784000 { - compatible = "qcom,sc7280-qfprom", "qcom,qfprom"; - reg = <0 0x00784000 0 0xa20>, - <0 0x00780000 0 0xa20>, - <0 0x00782000 0 0x120>, - <0 0x00786000 0 0x1fff>; - clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>; - clock-names = "core"; - power-domains = <&rpmhpd SC7280_MX>; - #address-cells = <1>; - #size-cells = <1>; - - gpu_speed_bin: gpu-speed-bin@1e9 { - reg = <0x1e9 0x2>; - bits = <5 8>; - }; - }; - - sdhc_1: mmc@7c4000 { - compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk>, <&sdc1_cmd>, <&sdc1_data>, <&sdc1_rclk>; - pinctrl-1 = <&sdc1_clk_sleep>, <&sdc1_cmd_sleep>, <&sdc1_data_sleep>, <&sdc1_rclk_sleep>; - status = "disabled"; - - reg = <0 0x007c4000 0 0x1000>, - <0 0x007c5000 0 0x1000>; - reg-names = "hc", "cqhci"; - - iommus = <&apps_smmu 0xc0 0x0>; - interrupts = , - ; - interrupt-names = "hc_irq", "pwr_irq"; - - clocks = <&gcc GCC_SDCC1_AHB_CLK>, - <&gcc GCC_SDCC1_APPS_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "iface", "core", "xo"; - interconnects = <&aggre1_noc MASTER_SDCC_1 0 &mc_virt SLAVE_EBI1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_1 0>; - interconnect-names = "sdhc-ddr","cpu-sdhc"; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&sdhc1_opp_table>; - - bus-width = <8>; - supports-cqe; - dma-coherent; - - qcom,dll-config = <0x0007642c>; - qcom,ddr-config = <0x80040868>; - - mmc-ddr-1_8v; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - - resets = <&gcc GCC_SDCC1_BCR>; - - sdhc1_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmhpd_opp_low_svs>; - opp-peak-kBps = <1800000 400000>; - opp-avg-kBps = <100000 0>; - }; - - opp-384000000 { - opp-hz = /bits/ 64 <384000000>; - required-opps = <&rpmhpd_opp_nom>; - opp-peak-kBps = <5400000 1600000>; - opp-avg-kBps = <390000 0>; - }; - }; - }; - - gpi_dma0: dma-controller@900000 { - #dma-cells = <3>; - compatible = "qcom,sc7280-gpi-dma", "qcom,sm6350-gpi-dma"; - reg = <0 0x00900000 0 0x60000>; - interrupts = , - , - , - , - , - , - , - , - , - , - , - ; - dma-channels = <12>; - dma-channel-mask = <0x7f>; - iommus = <&apps_smmu 0x0136 0x0>; - status = "disabled"; - }; - - qupv3_id_0: geniqup@9c0000 { - compatible = "qcom,geni-se-qup"; - reg = <0 0x009c0000 0 0x2000>; - clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, - <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; - clock-names = "m-ahb", "s-ahb"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - iommus = <&apps_smmu 0x123 0x0>; - status = "disabled"; - - i2c0: i2c@980000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00980000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c0_data_clk>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, - <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", - "qup-memory"; - power-domains = <&rpmhpd SC7280_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, - <&gpi_dma0 1 0 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi0: spi@980000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00980000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, - <&gpi_dma0 1 0 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart0: serial@980000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00980000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart0_cts>, <&qup_uart0_rts>, <&qup_uart0_tx>, <&qup_uart0_rx>; - interrupts = ; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c1: i2c@984000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00984000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c1_data_clk>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, - <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", - "qup-memory"; - power-domains = <&rpmhpd SC7280_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, - <&gpi_dma0 1 1 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi1: spi@984000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00984000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, - <&gpi_dma0 1 1 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart1: serial@984000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00984000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart1_cts>, <&qup_uart1_rts>, <&qup_uart1_tx>, <&qup_uart1_rx>; - interrupts = ; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c2: i2c@988000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00988000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c2_data_clk>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, - <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", - "qup-memory"; - power-domains = <&rpmhpd SC7280_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, - <&gpi_dma0 1 2 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi2: spi@988000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00988000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, - <&gpi_dma0 1 2 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart2: serial@988000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00988000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart2_cts>, <&qup_uart2_rts>, <&qup_uart2_tx>, <&qup_uart2_rx>; - interrupts = ; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c3: i2c@98c000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x0098c000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c3_data_clk>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, - <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", - "qup-memory"; - power-domains = <&rpmhpd SC7280_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, - <&gpi_dma0 1 3 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi3: spi@98c000 { - compatible = "qcom,geni-spi"; - reg = <0 0x0098c000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, - <&gpi_dma0 1 3 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart3: serial@98c000 { - compatible = "qcom,geni-uart"; - reg = <0 0x0098c000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart3_cts>, <&qup_uart3_rts>, <&qup_uart3_tx>, <&qup_uart3_rx>; - interrupts = ; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c4: i2c@990000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00990000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c4_data_clk>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, - <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", - "qup-memory"; - power-domains = <&rpmhpd SC7280_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, - <&gpi_dma0 1 4 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi4: spi@990000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00990000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, - <&gpi_dma0 1 4 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart4: serial@990000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00990000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart4_cts>, <&qup_uart4_rts>, <&qup_uart4_tx>, <&qup_uart4_rx>; - interrupts = ; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c5: i2c@994000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00994000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c5_data_clk>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, - <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", - "qup-memory"; - power-domains = <&rpmhpd SC7280_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, - <&gpi_dma0 1 5 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi5: spi@994000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00994000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, - <&gpi_dma0 1 5 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart5: serial@994000 { - compatible = "qcom,geni-debug-uart"; - reg = <0 0x00994000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart5_tx>, <&qup_uart5_rx>; - interrupts = ; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c6: i2c@998000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00998000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c6_data_clk>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, - <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", - "qup-memory"; - power-domains = <&rpmhpd SC7280_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, - <&gpi_dma0 1 6 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi6: spi@998000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00998000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, - <&gpi_dma0 1 6 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart6: serial@998000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00998000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart6_cts>, <&qup_uart6_rts>, <&qup_uart6_tx>, <&qup_uart6_rx>; - interrupts = ; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c7: i2c@99c000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x0099c000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c7_data_clk>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, - <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", - "qup-memory"; - power-domains = <&rpmhpd SC7280_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, - <&gpi_dma0 1 7 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi7: spi@99c000 { - compatible = "qcom,geni-spi"; - reg = <0 0x0099c000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, - <&gpi_dma0 1 7 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart7: serial@99c000 { - compatible = "qcom,geni-uart"; - reg = <0 0x0099c000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart7_cts>, <&qup_uart7_rts>, <&qup_uart7_tx>, <&qup_uart7_rx>; - interrupts = ; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - }; - - gpi_dma1: dma-controller@a00000 { - #dma-cells = <3>; - compatible = "qcom,sc7280-gpi-dma", "qcom,sm6350-gpi-dma"; - reg = <0 0x00a00000 0 0x60000>; - interrupts = , - , - , - , - , - , - , - , - , - , - , - ; - dma-channels = <12>; - dma-channel-mask = <0x1e>; - iommus = <&apps_smmu 0x56 0x0>; - status = "disabled"; - }; - - qupv3_id_1: geniqup@ac0000 { - compatible = "qcom,geni-se-qup"; - reg = <0 0x00ac0000 0 0x2000>; - clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, - <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; - clock-names = "m-ahb", "s-ahb"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - iommus = <&apps_smmu 0x43 0x0>; - status = "disabled"; - - i2c8: i2c@a80000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a80000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c8_data_clk>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, - <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", - "qup-memory"; - power-domains = <&rpmhpd SC7280_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, - <&gpi_dma1 1 0 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi8: spi@a80000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a80000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, - <&gpi_dma1 1 0 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart8: serial@a80000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00a80000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart8_cts>, <&qup_uart8_rts>, <&qup_uart8_tx>, <&qup_uart8_rx>; - interrupts = ; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c9: i2c@a84000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a84000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c9_data_clk>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, - <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", - "qup-memory"; - power-domains = <&rpmhpd SC7280_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, - <&gpi_dma1 1 1 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi9: spi@a84000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a84000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, - <&gpi_dma1 1 1 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart9: serial@a84000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00a84000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart9_cts>, <&qup_uart9_rts>, <&qup_uart9_tx>, <&qup_uart9_rx>; - interrupts = ; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c10: i2c@a88000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a88000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c10_data_clk>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, - <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", - "qup-memory"; - power-domains = <&rpmhpd SC7280_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, - <&gpi_dma1 1 2 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi10: spi@a88000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a88000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, - <&gpi_dma1 1 2 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart10: serial@a88000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00a88000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart10_cts>, <&qup_uart10_rts>, <&qup_uart10_tx>, <&qup_uart10_rx>; - interrupts = ; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c11: i2c@a8c000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a8c000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c11_data_clk>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, - <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", - "qup-memory"; - power-domains = <&rpmhpd SC7280_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, - <&gpi_dma1 1 3 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi11: spi@a8c000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a8c000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, - <&gpi_dma1 1 3 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart11: serial@a8c000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00a8c000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart11_cts>, <&qup_uart11_rts>, <&qup_uart11_tx>, <&qup_uart11_rx>; - interrupts = ; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c12: i2c@a90000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a90000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c12_data_clk>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, - <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", - "qup-memory"; - power-domains = <&rpmhpd SC7280_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, - <&gpi_dma1 1 4 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi12: spi@a90000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a90000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, - <&gpi_dma1 1 4 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart12: serial@a90000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00a90000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart12_cts>, <&qup_uart12_rts>, <&qup_uart12_tx>, <&qup_uart12_rx>; - interrupts = ; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c13: i2c@a94000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a94000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c13_data_clk>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, - <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", - "qup-memory"; - power-domains = <&rpmhpd SC7280_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, - <&gpi_dma1 1 5 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi13: spi@a94000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a94000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, - <&gpi_dma1 1 5 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart13: serial@a94000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00a94000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart13_cts>, <&qup_uart13_rts>, <&qup_uart13_tx>, <&qup_uart13_rx>; - interrupts = ; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c14: i2c@a98000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a98000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c14_data_clk>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, - <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", - "qup-memory"; - power-domains = <&rpmhpd SC7280_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, - <&gpi_dma1 1 6 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi14: spi@a98000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a98000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, - <&gpi_dma1 1 6 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart14: serial@a98000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00a98000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart14_cts>, <&qup_uart14_rts>, <&qup_uart14_tx>, <&qup_uart14_rx>; - interrupts = ; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - - i2c15: i2c@a9c000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a9c000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c15_data_clk>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, - <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; - interconnect-names = "qup-core", "qup-config", - "qup-memory"; - power-domains = <&rpmhpd SC7280_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, - <&gpi_dma1 1 7 QCOM_GPI_I2C>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - spi15: spi@a9c000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a9c000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; - interconnect-names = "qup-core", "qup-config"; - dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>, - <&gpi_dma1 1 7 QCOM_GPI_SPI>; - dma-names = "tx", "rx"; - status = "disabled"; - }; - - uart15: serial@a9c000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00a9c000 0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; - clock-names = "se"; - pinctrl-names = "default"; - pinctrl-0 = <&qup_uart15_cts>, <&qup_uart15_rts>, <&qup_uart15_tx>, <&qup_uart15_rx>; - interrupts = ; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qup_opp_table>; - interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; - interconnect-names = "qup-core", "qup-config"; - status = "disabled"; - }; - }; - - rng: rng@10d3000 { - compatible = "qcom,sc7280-trng", "qcom,trng"; - reg = <0 0x010d3000 0 0x1000>; - }; - - cnoc2: interconnect@1500000 { - reg = <0 0x01500000 0 0x1000>; - compatible = "qcom,sc7280-cnoc2"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - cnoc3: interconnect@1502000 { - reg = <0 0x01502000 0 0x1000>; - compatible = "qcom,sc7280-cnoc3"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - mc_virt: interconnect@1580000 { - reg = <0 0x01580000 0 0x4>; - compatible = "qcom,sc7280-mc-virt"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - system_noc: interconnect@1680000 { - reg = <0 0x01680000 0 0x15480>; - compatible = "qcom,sc7280-system-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - aggre1_noc: interconnect@16e0000 { - compatible = "qcom,sc7280-aggre1-noc"; - reg = <0 0x016e0000 0 0x1c080>; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, - <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>; - }; - - aggre2_noc: interconnect@1700000 { - reg = <0 0x01700000 0 0x2b080>; - compatible = "qcom,sc7280-aggre2-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - clocks = <&rpmhcc RPMH_IPA_CLK>; - }; - - mmss_noc: interconnect@1740000 { - reg = <0 0x01740000 0 0x1e080>; - compatible = "qcom,sc7280-mmss-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - wifi: wifi@17a10040 { - compatible = "qcom,wcn6750-wifi"; - reg = <0 0x17a10040 0 0x0>; - iommus = <&apps_smmu 0x1c00 0x1>; - interrupts = , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - ; - qcom,rproc = <&remoteproc_wpss>; - memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>; - status = "disabled"; - qcom,smem-states = <&wlan_smp2p_out 0>; - qcom,smem-state-names = "wlan-smp2p-out"; - }; - - pcie0: pcie@1c00000 { - compatible = "qcom,pcie-sc7280"; - reg = <0 0x01c00000 0 0x3000>, - <0 0x60000000 0 0xf1d>, - <0 0x60000f20 0 0xa8>, - <0 0x60001000 0 0x1000>, - <0 0x60100000 0 0x100000>, - <0 0x01c03000 0 0x1000>; - reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi"; - device_type = "pci"; - linux,pci-domain = <0>; - bus-range = <0x00 0xff>; - num-lanes = <1>; - - #address-cells = <3>; - #size-cells = <2>; - - ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>, - <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>; - - interrupts = , - , - , - , - , - , - , - , - ; - interrupt-names = "msi0", - "msi1", - "msi2", - "msi3", - "msi4", - "msi5", - "msi6", - "msi7", - "global"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; - - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, - <&gcc GCC_PCIE_0_PIPE_CLK_SRC>, - <&pcie0_phy>, - <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_PCIE_0_AUX_CLK>, - <&gcc GCC_PCIE_0_CFG_AHB_CLK>, - <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, - <&gcc GCC_DDRSS_PCIE_SF_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_CENTER_SF_AXI_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>; - clock-names = "pipe", - "pipe_mux", - "phy_pipe", - "ref", - "aux", - "cfg", - "bus_master", - "bus_slave", - "slave_q2a", - "tbu", - "ddrss_sf_tbu", - "aggre0", - "aggre1"; - - iommu-map = <0x0 &apps_smmu 0x1c00 0x1>, - <0x100 &apps_smmu 0x1c01 0x1>; - - resets = <&gcc GCC_PCIE_0_BCR>; - reset-names = "pci"; - - power-domains = <&gcc GCC_PCIE_0_GDSC>; - - phys = <&pcie0_phy>; - phy-names = "pciephy"; - - pinctrl-names = "default"; - pinctrl-0 = <&pcie0_clkreq_n>; - dma-coherent; - - status = "disabled"; - - pcie0_port: pcie@0 { - device_type = "pci"; - reg = <0x0 0x0 0x0 0x0 0x0>; - bus-range = <0x01 0xff>; - - #address-cells = <3>; - #size-cells = <2>; - ranges; - }; - }; - - pcie0_phy: phy@1c06000 { - compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy"; - reg = <0 0x01c06000 0 0x1000>; - - clocks = <&gcc GCC_PCIE_0_AUX_CLK>, - <&gcc GCC_PCIE_0_CFG_AHB_CLK>, - <&gcc GCC_PCIE_CLKREF_EN>, - <&gcc GCC_PCIE0_PHY_RCHNG_CLK>, - <&gcc GCC_PCIE_0_PIPE_CLK>; - clock-names = "aux", - "cfg_ahb", - "ref", - "refgen", - "pipe"; - - clock-output-names = "pcie_0_pipe_clk"; - #clock-cells = <0>; - - #phy-cells = <0>; - - resets = <&gcc GCC_PCIE_0_PHY_BCR>; - reset-names = "phy"; - - assigned-clocks = <&gcc GCC_PCIE0_PHY_RCHNG_CLK>; - assigned-clock-rates = <100000000>; - - status = "disabled"; - }; - - pcie1: pcie@1c08000 { - compatible = "qcom,pcie-sc7280"; - reg = <0 0x01c08000 0 0x3000>, - <0 0x40000000 0 0xf1d>, - <0 0x40000f20 0 0xa8>, - <0 0x40001000 0 0x1000>, - <0 0x40100000 0 0x100000>; - - reg-names = "parf", "dbi", "elbi", "atu", "config"; - device_type = "pci"; - linux,pci-domain = <1>; - bus-range = <0x00 0xff>; - num-lanes = <2>; - - #address-cells = <3>; - #size-cells = <2>; - - ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, - <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; - - interrupts = , - , - , - , - , - , - , - , - ; - interrupt-names = "msi0", - "msi1", - "msi2", - "msi3", - "msi4", - "msi5", - "msi6", - "msi7", - "global"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; - - clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, - <&gcc GCC_PCIE_1_PIPE_CLK_SRC>, - <&pcie1_phy>, - <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_PCIE_1_AUX_CLK>, - <&gcc GCC_PCIE_1_CFG_AHB_CLK>, - <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_1_SLV_AXI_CLK>, - <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, - <&gcc GCC_DDRSS_PCIE_SF_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_CENTER_SF_AXI_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>; - - clock-names = "pipe", - "pipe_mux", - "phy_pipe", - "ref", - "aux", - "cfg", - "bus_master", - "bus_slave", - "slave_q2a", - "tbu", - "ddrss_sf_tbu", - "aggre0", - "aggre1"; - - assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; - assigned-clock-rates = <19200000>; - - resets = <&gcc GCC_PCIE_1_BCR>; - reset-names = "pci"; - - power-domains = <&gcc GCC_PCIE_1_GDSC>; - - phys = <&pcie1_phy>; - phy-names = "pciephy"; - - pinctrl-names = "default"; - pinctrl-0 = <&pcie1_clkreq_n>; - - dma-coherent; - - iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, - <0x100 &apps_smmu 0x1c81 0x1>; - - status = "disabled"; - - pcie@0 { - device_type = "pci"; - reg = <0x0 0x0 0x0 0x0 0x0>; - bus-range = <0x01 0xff>; - - #address-cells = <3>; - #size-cells = <2>; - ranges; - }; - }; - - pcie1_phy: phy@1c0e000 { - compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy"; - reg = <0 0x01c0e000 0 0x1000>; - clocks = <&gcc GCC_PCIE_1_AUX_CLK>, - <&gcc GCC_PCIE_1_CFG_AHB_CLK>, - <&gcc GCC_PCIE_CLKREF_EN>, - <&gcc GCC_PCIE1_PHY_RCHNG_CLK>, - <&gcc GCC_PCIE_1_PIPE_CLK>; - clock-names = "aux", - "cfg_ahb", - "ref", - "refgen", - "pipe"; - - clock-output-names = "pcie_1_pipe_clk"; - #clock-cells = <0>; - - #phy-cells = <0>; - - resets = <&gcc GCC_PCIE_1_PHY_BCR>; - reset-names = "phy"; - - assigned-clocks = <&gcc GCC_PCIE1_PHY_RCHNG_CLK>; - assigned-clock-rates = <100000000>; - - status = "disabled"; - }; - - ufs_mem_hc: ufshc@1d84000 { - compatible = "qcom,sc7280-ufshc", "qcom,ufshc", - "jedec,ufs-2.0"; - reg = <0x0 0x01d84000 0x0 0x3000>; - interrupts = ; - phys = <&ufs_mem_phy>; - phy-names = "ufsphy"; - lanes-per-direction = <2>; - #reset-cells = <1>; - resets = <&gcc GCC_UFS_PHY_BCR>; - reset-names = "rst"; - - power-domains = <&gcc GCC_UFS_PHY_GDSC>; - required-opps = <&rpmhpd_opp_nom>; - - iommus = <&apps_smmu 0x80 0x0>; - dma-coherent; - - interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &cnoc2 SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "ufs-ddr", "cpu-ufs"; - - clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, - <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, - <&gcc GCC_UFS_PHY_AHB_CLK>, - <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, - <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; - clock-names = "core_clk", - "bus_aggr_clk", - "iface_clk", - "core_clk_unipro", - "ref_clk", - "tx_lane0_sync_clk", - "rx_lane0_sync_clk", - "rx_lane1_sync_clk"; - - operating-points-v2 = <&ufs_opp_table>; - - qcom,ice = <&ice>; - - status = "disabled"; - - ufs_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-75000000 { - opp-hz = /bits/ 64 <75000000>, - /bits/ 64 <0>, - /bits/ 64 <0>, - /bits/ 64 <75000000>, - /bits/ 64 <0>, - /bits/ 64 <0>, - /bits/ 64 <0>, - /bits/ 64 <0>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-150000000 { - opp-hz = /bits/ 64 <150000000>, - /bits/ 64 <0>, - /bits/ 64 <0>, - /bits/ 64 <150000000>, - /bits/ 64 <0>, - /bits/ 64 <0>, - /bits/ 64 <0>, - /bits/ 64 <0>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-300000000 { - opp-hz = /bits/ 64 <300000000>, - /bits/ 64 <0>, - /bits/ 64 <0>, - /bits/ 64 <300000000>, - /bits/ 64 <0>, - /bits/ 64 <0>, - /bits/ 64 <0>, - /bits/ 64 <0>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - }; - - ufs_mem_phy: phy@1d87000 { - compatible = "qcom,sc7280-qmp-ufs-phy"; - reg = <0x0 0x01d87000 0x0 0xe00>; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, - <&gcc GCC_UFS_1_CLKREF_EN>; - clock-names = "ref", "ref_aux", "qref"; - - power-domains = <&rpmhpd SC7280_MX>; - - resets = <&ufs_mem_hc 0>; - reset-names = "ufsphy"; - - #clock-cells = <1>; - #phy-cells = <0>; - - status = "disabled"; - }; - - ice: crypto@1d88000 { - compatible = "qcom,sc7280-inline-crypto-engine", - "qcom,inline-crypto-engine"; - reg = <0 0x01d88000 0 0x8000>; - clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; - }; - - cryptobam: dma-controller@1dc4000 { - compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; - reg = <0x0 0x01dc4000 0x0 0x28000>; - interrupts = ; - #dma-cells = <1>; - iommus = <&apps_smmu 0x4e4 0x0011>, - <&apps_smmu 0x4e6 0x0011>; - qcom,ee = <0>; - qcom,controlled-remotely; - num-channels = <16>; - qcom,num-ees = <4>; - }; - - crypto: crypto@1dfa000 { - compatible = "qcom,sc7280-qce", "qcom,sm8150-qce", "qcom,qce"; - reg = <0x0 0x01dfa000 0x0 0x6000>; - dmas = <&cryptobam 4>, <&cryptobam 5>; - dma-names = "rx", "tx"; - iommus = <&apps_smmu 0x4e4 0x0011>, - <&apps_smmu 0x4e4 0x0011>; - interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; - interconnect-names = "memory"; - }; - - ipa: ipa@1e40000 { - compatible = "qcom,sc7280-ipa"; - - iommus = <&apps_smmu 0x480 0x0>, - <&apps_smmu 0x482 0x0>; - reg = <0 0x01e40000 0 0x8000>, - <0 0x01e50000 0 0x4ad0>, - <0 0x01e04000 0 0x23000>; - reg-names = "ipa-reg", - "ipa-shared", - "gsi"; - - interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>, - <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, - <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "ipa", - "gsi", - "ipa-clock-query", - "ipa-setup-ready"; - - clocks = <&rpmhcc RPMH_IPA_CLK>; - clock-names = "core"; - - interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_IPA_CFG 0>; - interconnect-names = "memory", - "config"; - - qcom,qmp = <&aoss_qmp>; - - qcom,smem-states = <&ipa_smp2p_out 0>, - <&ipa_smp2p_out 1>; - qcom,smem-state-names = "ipa-clock-enabled-valid", - "ipa-clock-enabled"; - - status = "disabled"; - }; - - tcsr_mutex: hwlock@1f40000 { - compatible = "qcom,tcsr-mutex"; - reg = <0 0x01f40000 0 0x20000>; - #hwlock-cells = <1>; - }; - - tcsr_1: syscon@1f60000 { - compatible = "qcom,sc7280-tcsr", "syscon"; - reg = <0 0x01f60000 0 0x20000>; - }; - - tcsr_2: syscon@1fc0000 { - compatible = "qcom,sc7280-tcsr", "syscon"; - reg = <0 0x01fc0000 0 0x30000>; - }; - - lpasscc: lpasscc@3000000 { - compatible = "qcom,sc7280-lpasscc"; - reg = <0 0x03000000 0 0x40>, - <0 0x03c04000 0 0x4>; - reg-names = "qdsp6ss", "top_cc"; - clocks = <&gcc GCC_CFG_NOC_LPASS_CLK>; - clock-names = "iface"; - #clock-cells = <1>; - status = "reserved"; /* Owned by ADSP firmware */ - }; - - lpass_rx_macro: codec@3200000 { - compatible = "qcom,sc7280-lpass-rx-macro"; - reg = <0 0x03200000 0 0x1000>; - - pinctrl-names = "default"; - pinctrl-0 = <&lpass_rx_swr_clk>, <&lpass_rx_swr_data>; - - clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>, - <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>, - <&lpass_va_macro>; - clock-names = "mclk", "npl", "fsgen"; - - power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>, - <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; - power-domain-names = "macro", "dcodec"; - - #clock-cells = <0>; - #sound-dai-cells = <1>; - - status = "disabled"; - }; - - swr0: soundwire@3210000 { - compatible = "qcom,soundwire-v1.6.0"; - reg = <0 0x03210000 0 0x2000>; - - interrupts = ; - clocks = <&lpass_rx_macro>; - clock-names = "iface"; - - qcom,din-ports = <0>; - qcom,dout-ports = <5>; - - resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>; - reset-names = "swr_audio_cgcr"; - - qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff>; - qcom,ports-sinterval-low = /bits/ 8 <0x03 0x3f 0x1f 0x03 0x03>; - qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x01>; - qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>; - qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>; - qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff>; - qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff>; - qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff>; - qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00>; - - #sound-dai-cells = <1>; - #address-cells = <2>; - #size-cells = <0>; - - status = "disabled"; - }; - - lpass_tx_macro: codec@3220000 { - compatible = "qcom,sc7280-lpass-tx-macro"; - reg = <0 0x03220000 0 0x1000>; - - pinctrl-names = "default"; - pinctrl-0 = <&lpass_tx_swr_clk>, <&lpass_tx_swr_data>; - - clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>, - <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>, - <&lpass_va_macro>; - clock-names = "mclk", "npl", "fsgen"; - - power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>, - <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; - power-domain-names = "macro", "dcodec"; - - #clock-cells = <0>; - #sound-dai-cells = <1>; - - status = "disabled"; - }; - - swr1: soundwire@3230000 { - compatible = "qcom,soundwire-v1.6.0"; - reg = <0 0x03230000 0 0x2000>; - - interrupts-extended = <&intc GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 130 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&lpass_tx_macro>; - clock-names = "iface"; - - qcom,din-ports = <3>; - qcom,dout-ports = <0>; - - resets = <&lpass_audiocc LPASS_AUDIO_SWR_TX_CGCR>; - reset-names = "swr_audio_cgcr"; - - qcom,ports-sinterval-low = /bits/ 8 <0x01 0x03 0x03>; - qcom,ports-offset1 = /bits/ 8 <0x01 0x00 0x02>; - qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00>; - qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff>; - qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff>; - qcom,ports-word-length = /bits/ 8 <0xff 0x00 0xff>; - qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff>; - qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff>; - qcom,ports-lane-control = /bits/ 8 <0x00 0x01 0x00>; - - #sound-dai-cells = <1>; - #address-cells = <2>; - #size-cells = <0>; - - status = "disabled"; - }; - - lpass_wsa_macro: codec@3240000 { - compatible = "qcom,sc7280-lpass-wsa-macro"; - reg = <0x0 0x03240000 0x0 0x1000>; - - clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>, - <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>, - <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, - <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, - <&lpass_va_macro>; - clock-names = "mclk", - "npl", - "macro", - "dcodec", - "fsgen"; - - pinctrl-0 = <&lpass_wsa_swr_clk>, <&lpass_wsa_swr_data>; - pinctrl-names = "default"; - - #clock-cells = <0>; - clock-output-names = "mclk"; - #sound-dai-cells = <1>; - - status = "disabled"; - }; - - swr2: soundwire@3250000 { - compatible = "qcom,soundwire-v1.6.0"; - reg = <0x0 0x03250000 0x0 0x2000>; - - interrupts = ; - clocks = <&lpass_wsa_macro>; - clock-names = "iface"; - - resets = <&lpass_audiocc LPASS_AUDIO_SWR_WSA_CGCR>; - reset-names = "swr_audio_cgcr"; - - qcom,din-ports = <2>; - qcom,dout-ports = <6>; - - qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x07 - 0x1f 0x3f 0x0f 0x0f>; - qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>; - qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>; - qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; - qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; - qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; - qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01 - 0xff 0xff>; - qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff - 0xff 0xff>; - qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff - 0xff 0xff>; - - #address-cells = <2>; - #size-cells = <0>; - #sound-dai-cells = <1>; - - status = "disabled"; - }; - - lpass_audiocc: clock-controller@3300000 { - compatible = "qcom,sc7280-lpassaudiocc"; - reg = <0 0x03300000 0 0x30000>, - <0 0x032a9000 0 0x1000>; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&lpass_aon LPASS_AON_CC_MAIN_RCG_CLK_SRC>; - clock-names = "bi_tcxo", "lpass_aon_cc_main_rcg_clk_src"; - power-domains = <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; - #clock-cells = <1>; - #power-domain-cells = <1>; - #reset-cells = <1>; - }; - - lpass_va_macro: codec@3370000 { - compatible = "qcom,sc7280-lpass-va-macro"; - reg = <0 0x03370000 0 0x1000>; - - clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>; - clock-names = "mclk"; - - power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>, - <&lpass_aon LPASS_AON_CC_LPASS_AUDIO_HM_GDSC>; - power-domain-names = "macro", "dcodec"; - - #clock-cells = <0>; - #sound-dai-cells = <1>; - - status = "disabled"; - }; - - lpass_aon: clock-controller@3380000 { - compatible = "qcom,sc7280-lpassaoncc"; - reg = <0 0x03380000 0 0x30000>; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&rpmhcc RPMH_CXO_CLK_A>, - <&lpass_core LPASS_CORE_CC_CORE_CLK>; - clock-names = "bi_tcxo", "bi_tcxo_ao", "iface"; - #clock-cells = <1>; - #power-domain-cells = <1>; - status = "reserved"; /* Owned by ADSP firmware */ - }; - - lpass_core: clock-controller@3900000 { - compatible = "qcom,sc7280-lpasscorecc"; - reg = <0 0x03900000 0 0x50000>; - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "bi_tcxo"; - power-domains = <&lpass_hm LPASS_CORE_CC_LPASS_CORE_HM_GDSC>; - #clock-cells = <1>; - #power-domain-cells = <1>; - status = "reserved"; /* Owned by ADSP firmware */ - }; - - lpass_cpu: audio@3987000 { - compatible = "qcom,sc7280-lpass-cpu"; - - reg = <0 0x03987000 0 0x68000>, - <0 0x03b00000 0 0x29000>, - <0 0x03260000 0 0xc000>, - <0 0x03280000 0 0x29000>, - <0 0x03340000 0 0x29000>, - <0 0x0336c000 0 0x3000>; - reg-names = "lpass-hdmiif", - "lpass-lpaif", - "lpass-rxtx-cdc-dma-lpm", - "lpass-rxtx-lpaif", - "lpass-va-lpaif", - "lpass-va-cdc-dma-lpm"; - - iommus = <&apps_smmu 0x1820 0>, - <&apps_smmu 0x1821 0>, - <&apps_smmu 0x1832 0>; - - power-domains = <&rpmhpd SC7280_LCX>; - power-domain-names = "lcx"; - required-opps = <&rpmhpd_opp_nom>; - - clocks = <&lpass_aon LPASS_AON_CC_AUDIO_HM_H_CLK>, - <&lpass_core LPASS_CORE_CC_EXT_MCLK0_CLK>, - <&lpass_core LPASS_CORE_CC_SYSNOC_MPORT_CORE_CLK>, - <&lpass_core LPASS_CORE_CC_EXT_IF0_IBIT_CLK>, - <&lpass_core LPASS_CORE_CC_EXT_IF1_IBIT_CLK>, - <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM_CLK>, - <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM0_CLK>, - <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM1_CLK>, - <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM2_CLK>, - <&lpass_aon LPASS_AON_CC_VA_MEM0_CLK>; - clock-names = "aon_cc_audio_hm_h", - "audio_cc_ext_mclk0", - "core_cc_sysnoc_mport_core", - "core_cc_ext_if0_ibit", - "core_cc_ext_if1_ibit", - "audio_cc_codec_mem", - "audio_cc_codec_mem0", - "audio_cc_codec_mem1", - "audio_cc_codec_mem2", - "aon_cc_va_mem0"; - - #sound-dai-cells = <1>; - #address-cells = <1>; - #size-cells = <0>; - - interrupts = , - , - , - ; - interrupt-names = "lpass-irq-lpaif", - "lpass-irq-hdmi", - "lpass-irq-vaif", - "lpass-irq-rxtxif"; - - status = "disabled"; - }; - - slimbam: dma-controller@3a84000 { - compatible = "qcom,bam-v1.7.0"; - reg = <0 0x03a84000 0 0x20000>; - interrupts = ; - #dma-cells = <1>; - qcom,controlled-remotely; - num-channels = <31>; - qcom,ee = <1>; - qcom,num-ees = <2>; - iommus = <&apps_smmu 0x1826 0x0>; - status = "disabled"; - }; - - slim: slim-ngd@3ac0000 { - compatible = "qcom,slim-ngd-v1.5.0"; - reg = <0 0x03ac0000 0 0x2c000>; - interrupts = ; - dmas = <&slimbam 3>, <&slimbam 4>; - dma-names = "rx", "tx"; - iommus = <&apps_smmu 0x1826 0x0>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - lpass_hm: clock-controller@3c00000 { - compatible = "qcom,sc7280-lpasshm"; - reg = <0 0x03c00000 0 0x28>; - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "bi_tcxo"; - #clock-cells = <1>; - #power-domain-cells = <1>; - status = "reserved"; /* Owned by ADSP firmware */ - }; - - lpass_ag_noc: interconnect@3c40000 { - reg = <0 0x03c40000 0 0xf080>; - compatible = "qcom,sc7280-lpass-ag-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - lpass_tlmm: pinctrl@33c0000 { - compatible = "qcom,sc7280-lpass-lpi-pinctrl"; - reg = <0 0x033c0000 0x0 0x20000>, - <0 0x03550000 0x0 0x10000>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&lpass_tlmm 0 0 15>; - - lpass_dmic01_clk: dmic01-clk-state { - pins = "gpio6"; - function = "dmic1_clk"; - drive-strength = <8>; - bias-disable; - }; - - lpass_dmic01_data: dmic01-data-state { - pins = "gpio7"; - function = "dmic1_data"; - drive-strength = <8>; - bias-pull-down; - }; - - lpass_dmic23_clk: dmic23-clk-state { - pins = "gpio8"; - function = "dmic2_clk"; - drive-strength = <8>; - bias-disable; - }; - - lpass_dmic23_data: dmic23-data-state { - pins = "gpio9"; - function = "dmic2_data"; - drive-strength = <8>; - bias-pull-down; - }; - - lpass_rx_swr_clk: rx-swr-clk-state { - pins = "gpio3"; - function = "swr_rx_clk"; - drive-strength = <2>; - slew-rate = <1>; - bias-disable; - }; - - lpass_rx_swr_data: rx-swr-data-state { - pins = "gpio4", "gpio5"; - function = "swr_rx_data"; - drive-strength = <2>; - slew-rate = <1>; - bias-bus-hold; - }; - - lpass_tx_swr_clk: tx-swr-clk-state { - pins = "gpio0"; - function = "swr_tx_clk"; - drive-strength = <2>; - slew-rate = <1>; - bias-disable; - }; - - lpass_tx_swr_data: tx-swr-data-state { - pins = "gpio1", "gpio2", "gpio14"; - function = "swr_tx_data"; - drive-strength = <2>; - slew-rate = <1>; - bias-bus-hold; - }; - - lpass_wsa_swr_clk: wsa-swr-clk-state { - pins = "gpio10"; - function = "wsa_swr_clk"; - drive-strength = <2>; - slew-rate = <1>; - bias-disable; - }; - - lpass_wsa_swr_data: wsa-swr-data-state { - pins = "gpio11"; - function = "wsa_swr_data"; - drive-strength = <2>; - slew-rate = <1>; - bias-bus-hold; - }; - }; - - gpu: gpu@3d00000 { - compatible = "qcom,adreno-635.0", "qcom,adreno"; - reg = <0 0x03d00000 0 0x40000>, - <0 0x03d9e000 0 0x1000>, - <0 0x03d61000 0 0x800>; - reg-names = "kgsl_3d0_reg_memory", - "cx_mem", - "cx_dbgc"; - interrupts = ; - iommus = <&adreno_smmu 0 0x400>, - <&adreno_smmu 1 0x400>; - operating-points-v2 = <&gpu_opp_table>; - qcom,gmu = <&gmu>; - interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; - interconnect-names = "gfx-mem"; - #cooling-cells = <2>; - - nvmem-cells = <&gpu_speed_bin>; - nvmem-cell-names = "speed_bin"; - - status = "disabled"; - - gpu_zap_shader: zap-shader { - memory-region = <&gpu_zap_mem>; - }; - - gpu_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-315000000 { - opp-hz = /bits/ 64 <315000000>; - opp-level = ; - opp-peak-kBps = <1804000>; - opp-supported-hw = <0x17>; - }; - - opp-450000000 { - opp-hz = /bits/ 64 <450000000>; - opp-level = ; - opp-peak-kBps = <4068000>; - opp-supported-hw = <0x17>; - }; - - /* Only applicable for SKUs which has 550Mhz as Fmax */ - opp-550000000-0 { - opp-hz = /bits/ 64 <550000000>; - opp-level = ; - opp-peak-kBps = <8368000>; - opp-supported-hw = <0x01>; - }; - - opp-550000000-1 { - opp-hz = /bits/ 64 <550000000>; - opp-level = ; - opp-peak-kBps = <6832000>; - opp-supported-hw = <0x16>; - }; - - opp-608000000 { - opp-hz = /bits/ 64 <608000000>; - opp-level = ; - opp-peak-kBps = <8368000>; - opp-supported-hw = <0x16>; - }; - - opp-700000000 { - opp-hz = /bits/ 64 <700000000>; - opp-level = ; - opp-peak-kBps = <8532000>; - opp-supported-hw = <0x06>; - }; - - opp-812000000 { - opp-hz = /bits/ 64 <812000000>; - opp-level = ; - opp-peak-kBps = <8532000>; - opp-supported-hw = <0x06>; - }; - - opp-840000000 { - opp-hz = /bits/ 64 <840000000>; - opp-level = ; - opp-peak-kBps = <8532000>; - opp-supported-hw = <0x02>; - }; - - opp-900000000 { - opp-hz = /bits/ 64 <900000000>; - opp-level = ; - opp-peak-kBps = <8532000>; - opp-supported-hw = <0x02>; - }; - }; - }; - - gmu: gmu@3d6a000 { - compatible = "qcom,adreno-gmu-635.0", "qcom,adreno-gmu"; - reg = <0 0x03d6a000 0 0x34000>, - <0 0x3de0000 0 0x10000>, - <0 0x0b290000 0 0x10000>; - reg-names = "gmu", "rscc", "gmu_pdc"; - interrupts = , - ; - interrupt-names = "hfi", "gmu"; - clocks = <&gpucc GPU_CC_CX_GMU_CLK>, - <&gpucc GPU_CC_CXO_CLK>, - <&gcc GCC_DDRSS_GPU_AXI_CLK>, - <&gcc GCC_GPU_MEMNOC_GFX_CLK>, - <&gpucc GPU_CC_AHB_CLK>, - <&gpucc GPU_CC_HUB_CX_INT_CLK>, - <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>; - clock-names = "gmu", - "cxo", - "axi", - "memnoc", - "ahb", - "hub", - "smmu_vote"; - power-domains = <&gpucc GPU_CC_CX_GDSC>, - <&gpucc GPU_CC_GX_GDSC>; - power-domain-names = "cx", - "gx"; - iommus = <&adreno_smmu 5 0x400>; - operating-points-v2 = <&gmu_opp_table>; - - gmu_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - opp-level = ; - }; - }; - }; - - gpucc: clock-controller@3d90000 { - compatible = "qcom,sc7280-gpucc"; - reg = <0 0x03d90000 0 0x9000>; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_GPU_GPLL0_CLK_SRC>, - <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; - clock-names = "bi_tcxo", - "gcc_gpu_gpll0_clk_src", - "gcc_gpu_gpll0_div_clk_src"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; - - dma@117f000 { - compatible = "qcom,sc7280-dcc", "qcom,dcc"; - reg = <0x0 0x0117f000 0x0 0x1000>, - <0x0 0x01112000 0x0 0x6000>; - }; - - adreno_smmu: iommu@3da0000 { - compatible = "qcom,sc7280-smmu-500", "qcom,adreno-smmu", - "qcom,smmu-500", "arm,mmu-500"; - reg = <0 0x03da0000 0 0x20000>; - #iommu-cells = <2>; - #global-interrupts = <2>; - interrupts = , - , - , - , - , - , - , - , - , - , - , - ; - - clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, - <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, - <&gpucc GPU_CC_AHB_CLK>, - <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, - <&gpucc GPU_CC_CX_GMU_CLK>, - <&gpucc GPU_CC_HUB_CX_INT_CLK>, - <&gpucc GPU_CC_HUB_AON_CLK>; - clock-names = "gcc_gpu_memnoc_gfx_clk", - "gcc_gpu_snoc_dvm_gfx_clk", - "gpu_cc_ahb_clk", - "gpu_cc_hlos1_vote_gpu_smmu_clk", - "gpu_cc_cx_gmu_clk", - "gpu_cc_hub_cx_int_clk", - "gpu_cc_hub_aon_clk"; - - power-domains = <&gpucc GPU_CC_CX_GDSC>; - dma-coherent; - }; - - gfx_0_tbu: tbu@3dd9000 { - compatible = "qcom,sc7280-tbu"; - reg = <0x0 0x3dd9000 0x0 0x1000>; - qcom,stream-id-range = <&adreno_smmu 0x0 0x400>; - }; - - gfx_1_tbu: tbu@3ddd000 { - compatible = "qcom,sc7280-tbu"; - reg = <0x0 0x3ddd000 0x0 0x1000>; - qcom,stream-id-range = <&adreno_smmu 0x400 0x400>; - }; - - remoteproc_mpss: remoteproc@4080000 { - compatible = "qcom,sc7280-mpss-pas"; - reg = <0 0x04080000 0 0x10000>; - - interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", "handover", - "stop-ack", "shutdown-ack"; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; - - power-domains = <&rpmhpd SC7280_CX>, - <&rpmhpd SC7280_MSS>; - power-domain-names = "cx", "mss"; - - memory-region = <&mpss_mem>; - - qcom,qmp = <&aoss_qmp>; - - qcom,smem-states = <&modem_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts-extended = <&ipcc IPCC_CLIENT_MPSS - IPCC_MPROC_SIGNAL_GLINK_QMP - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_MPSS - IPCC_MPROC_SIGNAL_GLINK_QMP>; - label = "modem"; - qcom,remote-pid = <1>; - }; - }; - - stm@6002000 { - compatible = "arm,coresight-stm", "arm,primecell"; - reg = <0 0x06002000 0 0x1000>, - <0 0x16280000 0 0x180000>; - reg-names = "stm-base", "stm-stimulus-base"; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - out-ports { - port { - stm_out: endpoint { - remote-endpoint = <&funnel0_in7>; - }; - }; - }; - }; - - funnel@6041000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0 0x06041000 0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - out-ports { - port { - funnel0_out: endpoint { - remote-endpoint = <&merge_funnel_in0>; - }; - }; - }; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@7 { - reg = <7>; - funnel0_in7: endpoint { - remote-endpoint = <&stm_out>; - }; - }; - }; - }; - - funnel@6042000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0 0x06042000 0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - out-ports { - port { - funnel1_out: endpoint { - remote-endpoint = <&merge_funnel_in1>; - }; - }; - }; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@4 { - reg = <4>; - funnel1_in4: endpoint { - remote-endpoint = <&apss_merge_funnel_out>; - }; - }; - }; - }; - - funnel@6045000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0 0x06045000 0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - out-ports { - port { - merge_funnel_out: endpoint { - remote-endpoint = <&swao_funnel_in>; - }; - }; - }; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - merge_funnel_in0: endpoint { - remote-endpoint = <&funnel0_out>; - }; - }; - - port@1 { - reg = <1>; - merge_funnel_in1: endpoint { - remote-endpoint = <&funnel1_out>; - }; - }; - }; - }; - - replicator@6046000 { - compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; - reg = <0 0x06046000 0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - out-ports { - port { - replicator_out: endpoint { - remote-endpoint = <&etr_in>; - }; - }; - }; - - in-ports { - port { - replicator_in: endpoint { - remote-endpoint = <&swao_replicator_out>; - }; - }; - }; - }; - - etr@6048000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0 0x06048000 0 0x1000>; - iommus = <&apps_smmu 0x04c0 0>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,scatter-gather; - - in-ports { - port { - etr_in: endpoint { - remote-endpoint = <&replicator_out>; - }; - }; - }; - }; - - funnel@6b04000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0 0x06b04000 0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - out-ports { - port { - swao_funnel_out: endpoint { - remote-endpoint = <&etf_in>; - }; - }; - }; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@7 { - reg = <7>; - swao_funnel_in: endpoint { - remote-endpoint = <&merge_funnel_out>; - }; - }; - }; - }; - - etf@6b05000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0 0x06b05000 0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - out-ports { - port { - etf_out: endpoint { - remote-endpoint = <&swao_replicator_in>; - }; - }; - }; - - in-ports { - port { - etf_in: endpoint { - remote-endpoint = <&swao_funnel_out>; - }; - }; - }; - }; - - replicator@6b06000 { - compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; - reg = <0 0x06b06000 0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - qcom,replicator-loses-context; - - out-ports { - port { - swao_replicator_out: endpoint { - remote-endpoint = <&replicator_in>; - }; - }; - }; - - in-ports { - port { - swao_replicator_in: endpoint { - remote-endpoint = <&etf_out>; - }; - }; - }; - }; - - etm@7040000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07040000 0 0x1000>; - - cpu = <&cpu0>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; - - out-ports { - port { - etm0_out: endpoint { - remote-endpoint = <&apss_funnel_in0>; - }; - }; - }; - }; - - etm@7140000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07140000 0 0x1000>; - - cpu = <&cpu1>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; - - out-ports { - port { - etm1_out: endpoint { - remote-endpoint = <&apss_funnel_in1>; - }; - }; - }; - }; - - etm@7240000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07240000 0 0x1000>; - - cpu = <&cpu2>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; - - out-ports { - port { - etm2_out: endpoint { - remote-endpoint = <&apss_funnel_in2>; - }; - }; - }; - }; - - etm@7340000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07340000 0 0x1000>; - - cpu = <&cpu3>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; - - out-ports { - port { - etm3_out: endpoint { - remote-endpoint = <&apss_funnel_in3>; - }; - }; - }; - }; - - etm@7440000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07440000 0 0x1000>; - - cpu = <&cpu4>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; - - out-ports { - port { - etm4_out: endpoint { - remote-endpoint = <&apss_funnel_in4>; - }; - }; - }; - }; - - etm@7540000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07540000 0 0x1000>; - - cpu = <&cpu5>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; - - out-ports { - port { - etm5_out: endpoint { - remote-endpoint = <&apss_funnel_in5>; - }; - }; - }; - }; - - etm@7640000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07640000 0 0x1000>; - - cpu = <&cpu6>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; - - out-ports { - port { - etm6_out: endpoint { - remote-endpoint = <&apss_funnel_in6>; - }; - }; - }; - }; - - etm@7740000 { - compatible = "arm,coresight-etm4x", "arm,primecell"; - reg = <0 0x07740000 0 0x1000>; - - cpu = <&cpu7>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; - - out-ports { - port { - etm7_out: endpoint { - remote-endpoint = <&apss_funnel_in7>; - }; - }; - }; - }; - - funnel@7800000 { /* APSS Funnel */ - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0 0x07800000 0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - out-ports { - port { - apss_funnel_out: endpoint { - remote-endpoint = <&apss_merge_funnel_in>; - }; - }; - }; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - apss_funnel_in0: endpoint { - remote-endpoint = <&etm0_out>; - }; - }; - - port@1 { - reg = <1>; - apss_funnel_in1: endpoint { - remote-endpoint = <&etm1_out>; - }; - }; - - port@2 { - reg = <2>; - apss_funnel_in2: endpoint { - remote-endpoint = <&etm2_out>; - }; - }; - - port@3 { - reg = <3>; - apss_funnel_in3: endpoint { - remote-endpoint = <&etm3_out>; - }; - }; - - port@4 { - reg = <4>; - apss_funnel_in4: endpoint { - remote-endpoint = <&etm4_out>; - }; - }; - - port@5 { - reg = <5>; - apss_funnel_in5: endpoint { - remote-endpoint = <&etm5_out>; - }; - }; - - port@6 { - reg = <6>; - apss_funnel_in6: endpoint { - remote-endpoint = <&etm6_out>; - }; - }; - - port@7 { - reg = <7>; - apss_funnel_in7: endpoint { - remote-endpoint = <&etm7_out>; - }; - }; - }; - }; - - funnel@7810000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0 0x07810000 0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - out-ports { - port { - apss_merge_funnel_out: endpoint { - remote-endpoint = <&funnel1_in4>; - }; - }; - }; - - in-ports { - port { - apss_merge_funnel_in: endpoint { - remote-endpoint = <&apss_funnel_out>; - }; - }; - }; - }; - - sdhc_2: mmc@8804000 { - compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>; - pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>; - status = "disabled"; - - reg = <0 0x08804000 0 0x1000>; - - iommus = <&apps_smmu 0x100 0x0>; - interrupts = , - ; - interrupt-names = "hc_irq", "pwr_irq"; - - clocks = <&gcc GCC_SDCC2_AHB_CLK>, - <&gcc GCC_SDCC2_APPS_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "iface", "core", "xo"; - interconnects = <&aggre1_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_SDCC_2 0>; - interconnect-names = "sdhc-ddr","cpu-sdhc"; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&sdhc2_opp_table>; - - bus-width = <4>; - dma-coherent; - - qcom,dll-config = <0x0007642c>; - - resets = <&gcc GCC_SDCC2_BCR>; - - sdhc2_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmhpd_opp_low_svs>; - opp-peak-kBps = <1800000 400000>; - opp-avg-kBps = <100000 0>; - }; - - opp-202000000 { - opp-hz = /bits/ 64 <202000000>; - required-opps = <&rpmhpd_opp_nom>; - opp-peak-kBps = <5400000 1600000>; - opp-avg-kBps = <200000 0>; - }; - }; - }; - - usb_1_hsphy: phy@88e3000 { - compatible = "qcom,sc7280-usb-hs-phy", - "qcom,usb-snps-hs-7nm-phy"; - reg = <0 0x088e3000 0 0x400>; - status = "disabled"; - #phy-cells = <0>; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "ref"; - - resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; - }; - - usb_2_hsphy: phy@88e4000 { - compatible = "qcom,sc7280-usb-hs-phy", - "qcom,usb-snps-hs-7nm-phy"; - reg = <0 0x088e4000 0 0x400>; - status = "disabled"; - #phy-cells = <0>; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "ref"; - - resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; - }; - - usb_1_qmpphy: phy@88e8000 { - compatible = "qcom,sc7280-qmp-usb3-dp-phy"; - reg = <0 0x088e8000 0 0x3000>; - status = "disabled"; - - clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, - <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "aux", - "ref", - "com_aux", - "usb3_pipe"; - - resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, - <&gcc GCC_USB3_PHY_PRIM_BCR>; - reset-names = "phy", "common"; - - #clock-cells = <1>; - #phy-cells = <1>; - - orientation-switch; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - usb_dp_qmpphy_out: endpoint { - }; - }; - - port@1 { - reg = <1>; - - usb_dp_qmpphy_usb_ss_in: endpoint { - remote-endpoint = <&usb_1_dwc3_ss>; - }; - }; - - port@2 { - reg = <2>; - - usb_dp_qmpphy_dp_in: endpoint { - remote-endpoint = <&mdss_dp_out>; - }; - }; - }; - }; - - usb_2: usb@8c00000 { - compatible = "qcom,sc7280-dwc3", "qcom,snps-dwc3"; - reg = <0 0x08c00000 0 0xfc100>; - status = "disabled"; - - clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>, - <&gcc GCC_USB30_SEC_MASTER_CLK>, - <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>, - <&gcc GCC_USB30_SEC_SLEEP_CLK>, - <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>; - clock-names = "cfg_noc", - "core", - "iface", - "sleep", - "mock_utmi"; - - assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_SEC_MASTER_CLK>; - assigned-clock-rates = <19200000>, <200000000>; - - interrupts-extended = <&intc GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, - <&intc GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, - <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 12 IRQ_TYPE_EDGE_BOTH>, - <&pdc 13 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "dwc_usb3", - "pwr_event", - "hs_phy_irq", - "dp_hs_phy_irq", - "dm_hs_phy_irq"; - - power-domains = <&gcc GCC_USB30_SEC_GDSC>; - required-opps = <&rpmhpd_opp_nom>; - - resets = <&gcc GCC_USB30_SEC_BCR>; - - interconnects = <&aggre1_noc MASTER_USB2 0 &mc_virt SLAVE_EBI1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_USB2 0>; - interconnect-names = "usb-ddr", "apps-usb"; - - iommus = <&apps_smmu 0xa0 0x0>; - snps,dis_u2_susphy_quirk; - snps,dis_enblslpm_quirk; - snps,dis-u1-entry-quirk; - snps,dis-u2-entry-quirk; - phys = <&usb_2_hsphy>; - phy-names = "usb2-phy"; - maximum-speed = "high-speed"; - usb-role-switch; - - port { - usb2_role_switch: endpoint { - remote-endpoint = <&eud_ep>; - }; - }; - }; - - qspi: spi@88dc000 { - compatible = "qcom,sc7280-qspi", "qcom,qspi-v1"; - reg = <0 0x088dc000 0 0x1000>; - iommus = <&apps_smmu 0x20 0x0>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = ; - clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, - <&gcc GCC_QSPI_CORE_CLK>; - clock-names = "iface", "core"; - interconnects = <&gem_noc MASTER_APPSS_PROC 0 - &cnoc2 SLAVE_QSPI_0 0>; - interconnect-names = "qspi-config"; - power-domains = <&rpmhpd SC7280_CX>; - operating-points-v2 = <&qspi_opp_table>; - status = "disabled"; - }; - - remoteproc_adsp: remoteproc@3700000 { - compatible = "qcom,sc7280-adsp-pas"; - reg = <0 0x03700000 0 0x100>; - - interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", "handover", - "stop-ack", "shutdown-ack"; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; - - power-domains = <&rpmhpd SC7280_LCX>, - <&rpmhpd SC7280_LMX>; - power-domain-names = "lcx", "lmx"; - - memory-region = <&adsp_mem>; - - qcom,qmp = <&aoss_qmp>; - - qcom,smem-states = <&adsp_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - remoteproc_adsp_glink: glink-edge { - interrupts-extended = <&ipcc IPCC_CLIENT_LPASS - IPCC_MPROC_SIGNAL_GLINK_QMP - IRQ_TYPE_EDGE_RISING>; - - mboxes = <&ipcc IPCC_CLIENT_LPASS - IPCC_MPROC_SIGNAL_GLINK_QMP>; - - label = "lpass"; - qcom,remote-pid = <2>; - - apr { - compatible = "qcom,apr-v2"; - qcom,glink-channels = "apr_audio_svc"; - qcom,domain = ; - #address-cells = <1>; - #size-cells = <0>; - - service@3 { - reg = ; - compatible = "qcom,q6core"; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - }; - - q6afe: service@4 { - compatible = "qcom,q6afe"; - reg = ; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - - q6afedai: dais { - compatible = "qcom,q6afe-dais"; - #address-cells = <1>; - #size-cells = <0>; - #sound-dai-cells = <1>; - }; - - q6afecc: clock-controller { - compatible = "qcom,q6afe-clocks"; - #clock-cells = <2>; - }; - - q6usbdai: usbd { - compatible = "qcom,q6usb"; - iommus = <&apps_smmu 0x180f 0x0>; - #sound-dai-cells = <1>; - qcom,usb-audio-intr-idx = /bits/ 16 <2>; - }; - }; - - q6asm: service@7 { - compatible = "qcom,q6asm"; - reg = ; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - - q6asmdai: dais { - compatible = "qcom,q6asm-dais"; - #address-cells = <1>; - #size-cells = <0>; - #sound-dai-cells = <1>; - iommus = <&apps_smmu 0x1801 0x0>; - - dai@0 { - reg = ; - }; - - dai@1 { - reg = ; - }; - - dai@2 { - reg = ; - }; - }; - }; - - q6adm: service@8 { - compatible = "qcom,q6adm"; - reg = ; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - - q6routing: routing { - compatible = "qcom,q6adm-routing"; - #sound-dai-cells = <0>; - }; - }; - }; - - fastrpc { - compatible = "qcom,fastrpc"; - qcom,glink-channels = "fastrpcglink-apps-dsp"; - label = "adsp"; - qcom,non-secure-domain; - #address-cells = <1>; - #size-cells = <0>; - - compute-cb@3 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <3>; - iommus = <&apps_smmu 0x1803 0x0>; - dma-coherent; - }; - - compute-cb@4 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <4>; - iommus = <&apps_smmu 0x1804 0x0>; - dma-coherent; - }; - - compute-cb@5 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <5>; - iommus = <&apps_smmu 0x1805 0x0>; - dma-coherent; - }; - }; - }; - }; - - remoteproc_wpss: remoteproc@8a00000 { - compatible = "qcom,sc7280-wpss-pas"; - reg = <0 0x08a00000 0 0x10000>; - - interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>, - <&wpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&wpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&wpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&wpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, - <&wpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", "handover", - "stop-ack", "shutdown-ack"; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; - - power-domains = <&rpmhpd SC7280_CX>, - <&rpmhpd SC7280_MX>; - power-domain-names = "cx", "mx"; - - memory-region = <&wpss_mem>; - - qcom,qmp = <&aoss_qmp>; - - qcom,smem-states = <&wpss_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - - status = "disabled"; - - glink-edge { - interrupts-extended = <&ipcc IPCC_CLIENT_WPSS - IPCC_MPROC_SIGNAL_GLINK_QMP - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_WPSS - IPCC_MPROC_SIGNAL_GLINK_QMP>; - - label = "wpss"; - qcom,remote-pid = <13>; - }; - }; - - pmu@9091000 { - compatible = "qcom,sc7280-llcc-bwmon"; - reg = <0 0x09091000 0 0x1000>; - - interrupts = ; - - interconnects = <&mc_virt MASTER_LLCC 3 &mc_virt SLAVE_EBI1 3>; - - operating-points-v2 = <&llcc_bwmon_opp_table>; - - llcc_bwmon_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-0 { - opp-peak-kBps = <800000>; - }; - opp-1 { - opp-peak-kBps = <1804000>; - }; - opp-2 { - opp-peak-kBps = <2188000>; - }; - opp-3 { - opp-peak-kBps = <3072000>; - }; - opp-4 { - opp-peak-kBps = <4068000>; - }; - opp-5 { - opp-peak-kBps = <6220000>; - }; - opp-6 { - opp-peak-kBps = <6832000>; - }; - opp-7 { - opp-peak-kBps = <8532000>; - }; - opp-8 { - opp-peak-kBps = <10944000>; - }; - opp-9 { - opp-peak-kBps = <12787200>; - }; - }; - }; - - pmu@90b6400 { - compatible = "qcom,sc7280-cpu-bwmon", "qcom,sdm845-bwmon"; - reg = <0 0x090b6400 0 0x600>; - - interrupts = ; - - interconnects = <&gem_noc MASTER_APPSS_PROC 3 &gem_noc SLAVE_LLCC 3>; - operating-points-v2 = <&cpu_bwmon_opp_table>; - - cpu_bwmon_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-0 { - opp-peak-kBps = <2400000>; - }; - opp-1 { - opp-peak-kBps = <4800000>; - }; - opp-2 { - opp-peak-kBps = <7456000>; - }; - opp-3 { - opp-peak-kBps = <9600000>; - }; - opp-4 { - opp-peak-kBps = <12896000>; - }; - opp-5 { - opp-peak-kBps = <14928000>; - }; - opp-6 { - opp-peak-kBps = <17056000>; - }; - }; - }; - - dc_noc: interconnect@90e0000 { - reg = <0 0x090e0000 0 0x5080>; - compatible = "qcom,sc7280-dc-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - gem_noc: interconnect@9100000 { - reg = <0 0x09100000 0 0xe2200>; - compatible = "qcom,sc7280-gem-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - system-cache-controller@9200000 { - compatible = "qcom,sc7280-llcc"; - reg = <0 0x09200000 0 0x58000>, <0 0x09280000 0 0x58000>, - <0 0x09600000 0 0x58000>; - reg-names = "llcc0_base", "llcc1_base", "llcc_broadcast_base"; - interrupts = ; - }; - - eud: eud@88e0000 { - compatible = "qcom,sc7280-eud", "qcom,eud"; - reg = <0 0x88e0000 0 0x2000>, - <0 0x88e2000 0 0x1000>; - interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>; - - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - eud_ep: endpoint { - remote-endpoint = <&usb2_role_switch>; - }; - }; - }; - }; - - nsp_noc: interconnect@a0c0000 { - reg = <0 0x0a0c0000 0 0x10000>; - compatible = "qcom,sc7280-nsp-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - remoteproc_cdsp: remoteproc@a300000 { - compatible = "qcom,sc7280-cdsp-pas"; - reg = <0 0x0a300000 0 0x10000>; - - interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", "handover", - "stop-ack", "shutdown-ack"; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; - - power-domains = <&rpmhpd SC7280_CX>, - <&rpmhpd SC7280_MX>; - power-domain-names = "cx", "mx"; - - interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>; - - memory-region = <&cdsp_mem>; - - qcom,qmp = <&aoss_qmp>; - - qcom,smem-states = <&cdsp_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts-extended = <&ipcc IPCC_CLIENT_CDSP - IPCC_MPROC_SIGNAL_GLINK_QMP - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_CDSP - IPCC_MPROC_SIGNAL_GLINK_QMP>; - - label = "cdsp"; - qcom,remote-pid = <5>; - - fastrpc { - compatible = "qcom,fastrpc"; - qcom,glink-channels = "fastrpcglink-apps-dsp"; - label = "cdsp"; - qcom,non-secure-domain; - #address-cells = <1>; - #size-cells = <0>; - - compute-cb@1 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <1>; - iommus = <&apps_smmu 0x11a1 0x0420>, - <&apps_smmu 0x1181 0x0420>; - dma-coherent; - }; - - compute-cb@2 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <2>; - iommus = <&apps_smmu 0x11a2 0x0420>, - <&apps_smmu 0x1182 0x0420>; - dma-coherent; - }; - - compute-cb@3 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <3>; - iommus = <&apps_smmu 0x11a3 0x0420>, - <&apps_smmu 0x1183 0x0420>; - dma-coherent; - }; - - compute-cb@4 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <4>; - iommus = <&apps_smmu 0x11a4 0x0420>, - <&apps_smmu 0x1184 0x0420>; - dma-coherent; - }; - - compute-cb@5 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <5>; - iommus = <&apps_smmu 0x11a5 0x0420>, - <&apps_smmu 0x1185 0x0420>; - dma-coherent; - }; - - compute-cb@6 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <6>; - iommus = <&apps_smmu 0x11a6 0x0420>, - <&apps_smmu 0x1186 0x0420>; - dma-coherent; - }; - - compute-cb@7 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <7>; - iommus = <&apps_smmu 0x11a7 0x0420>, - <&apps_smmu 0x1187 0x0420>; - dma-coherent; - }; - - compute-cb@8 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <8>; - iommus = <&apps_smmu 0x11a8 0x0420>, - <&apps_smmu 0x1188 0x0420>; - dma-coherent; - }; - - /* note: secure cb9 in downstream */ - - compute-cb@11 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <11>; - iommus = <&apps_smmu 0x11ab 0x0420>, - <&apps_smmu 0x118b 0x0420>; - dma-coherent; - }; - - compute-cb@12 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <12>; - iommus = <&apps_smmu 0x11ac 0x0420>, - <&apps_smmu 0x118c 0x0420>; - dma-coherent; - }; - - compute-cb@13 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <13>; - iommus = <&apps_smmu 0x11ad 0x0420>, - <&apps_smmu 0x118d 0x0420>; - dma-coherent; - }; - - compute-cb@14 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <14>; - iommus = <&apps_smmu 0x11ae 0x0420>, - <&apps_smmu 0x118e 0x0420>; - dma-coherent; - }; - }; - }; - }; - - usb_1: usb@a600000 { - compatible = "qcom,sc7280-dwc3", "qcom,snps-dwc3"; - reg = <0 0x0a600000 0 0xfc100>; - status = "disabled"; - - clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MASTER_CLK>, - <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; - clock-names = "cfg_noc", - "core", - "iface", - "sleep", - "mock_utmi"; - - assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_MASTER_CLK>; - assigned-clock-rates = <19200000>, <200000000>; - - interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, - <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, - <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 14 IRQ_TYPE_EDGE_BOTH>, - <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "dwc_usb3", - "pwr_event", - "hs_phy_irq", - "dp_hs_phy_irq", - "dm_hs_phy_irq", - "ss_phy_irq"; - - power-domains = <&gcc GCC_USB30_PRIM_GDSC>; - required-opps = <&rpmhpd_opp_nom>; - - resets = <&gcc GCC_USB30_PRIM_BCR>; - - interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>, - <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_USB3_0 0>; - interconnect-names = "usb-ddr", "apps-usb"; - - wakeup-source; - - iommus = <&apps_smmu 0xe0 0x0>; - snps,dis_u2_susphy_quirk; - snps,dis_enblslpm_quirk; - snps,parkmode-disable-ss-quirk; - snps,dis-u1-entry-quirk; - snps,dis-u2-entry-quirk; - num-hc-interrupters = /bits/ 16 <3>; - phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; - phy-names = "usb2-phy", "usb3-phy"; - maximum-speed = "super-speed"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - usb_1_dwc3_hs: endpoint { - }; - }; - - port@1 { - reg = <1>; - - usb_1_dwc3_ss: endpoint { - remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; - }; - }; - }; - }; - - venus: video-codec@aa00000 { - compatible = "qcom,sc7280-venus"; - reg = <0 0x0aa00000 0 0xd0600>; - interrupts = ; - - clocks = <&videocc VIDEO_CC_MVSC_CORE_CLK>, - <&videocc VIDEO_CC_MVSC_CTL_AXI_CLK>, - <&videocc VIDEO_CC_VENUS_AHB_CLK>, - <&videocc VIDEO_CC_MVS0_CORE_CLK>, - <&videocc VIDEO_CC_MVS0_AXI_CLK>; - clock-names = "core", "bus", "iface", - "vcodec_core", "vcodec_bus"; - - power-domains = <&videocc MVSC_GDSC>, - <&videocc MVS0_GDSC>, - <&rpmhpd SC7280_CX>; - power-domain-names = "venus", "vcodec0", "cx"; - operating-points-v2 = <&venus_opp_table>; - - interconnects = <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_VENUS_CFG 0>, - <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>; - interconnect-names = "cpu-cfg", "video-mem"; - - iommus = <&apps_smmu 0x2180 0x20>; - memory-region = <&video_mem>; - - status = "disabled"; - - venus_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-133330000 { - opp-hz = /bits/ 64 <133330000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-240000000 { - opp-hz = /bits/ 64 <240000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-335000000 { - opp-hz = /bits/ 64 <335000000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - - opp-424000000 { - opp-hz = /bits/ 64 <424000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - - opp-460000048 { - opp-hz = /bits/ 64 <460000048>; - required-opps = <&rpmhpd_opp_turbo>; - }; - }; - }; - - videocc: clock-controller@aaf0000 { - compatible = "qcom,sc7280-videocc"; - reg = <0 0x0aaf0000 0 0x10000>; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&rpmhcc RPMH_CXO_CLK_A>; - clock-names = "bi_tcxo", "bi_tcxo_ao"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; - - cci0: cci@ac4a000 { - compatible = "qcom,sc7280-cci", "qcom,msm8996-cci"; - reg = <0 0x0ac4a000 0 0x1000>; - interrupts = ; - power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; - - clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, - <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, - <&camcc CAM_CC_CPAS_AHB_CLK>, - <&camcc CAM_CC_CCI_0_CLK>, - <&camcc CAM_CC_CCI_0_CLK_SRC>; - clock-names = "camnoc_axi", - "slow_ahb_src", - "cpas_ahb", - "cci", - "cci_src"; - pinctrl-0 = <&cci0_default &cci1_default>; - pinctrl-1 = <&cci0_sleep &cci1_sleep>; - pinctrl-names = "default", "sleep"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - - cci0_i2c0: i2c-bus@0 { - reg = <0>; - clock-frequency = <1000000>; - #address-cells = <1>; - #size-cells = <0>; - }; - - cci0_i2c1: i2c-bus@1 { - reg = <1>; - clock-frequency = <1000000>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - cci1: cci@ac4b000 { - compatible = "qcom,sc7280-cci", "qcom,msm8996-cci"; - reg = <0 0x0ac4b000 0 0x1000>; - interrupts = ; - power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; - - clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, - <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, - <&camcc CAM_CC_CPAS_AHB_CLK>, - <&camcc CAM_CC_CCI_1_CLK>, - <&camcc CAM_CC_CCI_1_CLK_SRC>; - clock-names = "camnoc_axi", - "slow_ahb_src", - "cpas_ahb", - "cci", - "cci_src"; - pinctrl-0 = <&cci2_default &cci3_default>; - pinctrl-1 = <&cci2_sleep &cci3_sleep>; - pinctrl-names = "default", "sleep"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - - cci1_i2c0: i2c-bus@0 { - reg = <0>; - clock-frequency = <1000000>; - #address-cells = <1>; - #size-cells = <0>; - }; - - cci1_i2c1: i2c-bus@1 { - reg = <1>; - clock-frequency = <1000000>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - camss: isp@acb3000 { - compatible = "qcom,sc7280-camss"; - - reg = <0x0 0x0acb3000 0x0 0x1000>, - <0x0 0x0acba000 0x0 0x1000>, - <0x0 0x0acc1000 0x0 0x1000>, - <0x0 0x0acc8000 0x0 0x1000>, - <0x0 0x0accf000 0x0 0x1000>, - <0x0 0x0ace0000 0x0 0x2000>, - <0x0 0x0ace2000 0x0 0x2000>, - <0x0 0x0ace4000 0x0 0x2000>, - <0x0 0x0ace6000 0x0 0x2000>, - <0x0 0x0ace8000 0x0 0x2000>, - <0x0 0x0acaf000 0x0 0x4000>, - <0x0 0x0acb6000 0x0 0x4000>, - <0x0 0x0acbd000 0x0 0x4000>, - <0x0 0x0acc4000 0x0 0x4000>, - <0x0 0x0accb000 0x0 0x4000>; - reg-names = "csid0", - "csid1", - "csid2", - "csid_lite0", - "csid_lite1", - "csiphy0", - "csiphy1", - "csiphy2", - "csiphy3", - "csiphy4", - "vfe0", - "vfe1", - "vfe2", - "vfe_lite0", - "vfe_lite1"; - - clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, - <&camcc CAM_CC_CPAS_AHB_CLK>, - <&camcc CAM_CC_CSIPHY0_CLK>, - <&camcc CAM_CC_CSI0PHYTIMER_CLK>, - <&camcc CAM_CC_CSIPHY1_CLK>, - <&camcc CAM_CC_CSI1PHYTIMER_CLK>, - <&camcc CAM_CC_CSIPHY2_CLK>, - <&camcc CAM_CC_CSI2PHYTIMER_CLK>, - <&camcc CAM_CC_CSIPHY3_CLK>, - <&camcc CAM_CC_CSI3PHYTIMER_CLK>, - <&camcc CAM_CC_CSIPHY4_CLK>, - <&camcc CAM_CC_CSI4PHYTIMER_CLK>, - <&gcc GCC_CAMERA_HF_AXI_CLK>, - <&gcc GCC_CAMERA_SF_AXI_CLK>, - <&camcc CAM_CC_ICP_AHB_CLK>, - <&camcc CAM_CC_IFE_0_CLK>, - <&camcc CAM_CC_IFE_0_AXI_CLK>, - <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>, - <&camcc CAM_CC_IFE_0_CSID_CLK>, - <&camcc CAM_CC_IFE_1_CLK>, - <&camcc CAM_CC_IFE_1_AXI_CLK>, - <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>, - <&camcc CAM_CC_IFE_1_CSID_CLK>, - <&camcc CAM_CC_IFE_2_CLK>, - <&camcc CAM_CC_IFE_2_AXI_CLK>, - <&camcc CAM_CC_IFE_2_CPHY_RX_CLK>, - <&camcc CAM_CC_IFE_2_CSID_CLK>, - <&camcc CAM_CC_IFE_LITE_0_CLK>, - <&camcc CAM_CC_IFE_LITE_0_CPHY_RX_CLK>, - <&camcc CAM_CC_IFE_LITE_0_CSID_CLK>, - <&camcc CAM_CC_IFE_LITE_1_CLK>, - <&camcc CAM_CC_IFE_LITE_1_CPHY_RX_CLK>, - <&camcc CAM_CC_IFE_LITE_1_CSID_CLK>; - clock-names = "camnoc_axi", - "cpas_ahb", - "csiphy0", - "csiphy0_timer", - "csiphy1", - "csiphy1_timer", - "csiphy2", - "csiphy2_timer", - "csiphy3", - "csiphy3_timer", - "csiphy4", - "csiphy4_timer", - "gcc_axi_hf", - "gcc_axi_sf", - "icp_ahb", - "vfe0", - "vfe0_axi", - "vfe0_cphy_rx", - "vfe0_csid", - "vfe1", - "vfe1_axi", - "vfe1_cphy_rx", - "vfe1_csid", - "vfe2", - "vfe2_axi", - "vfe2_cphy_rx", - "vfe2_csid", - "vfe_lite0", - "vfe_lite0_cphy_rx", - "vfe_lite0_csid", - "vfe_lite1", - "vfe_lite1_cphy_rx", - "vfe_lite1_csid"; - - interrupts = , - , - , - , - , - , - , - , - , - , - , - , - , - , - ; - interrupt-names = "csid0", - "csid1", - "csid2", - "csid_lite0", - "csid_lite1", - "csiphy0", - "csiphy1", - "csiphy2", - "csiphy3", - "csiphy4", - "vfe0", - "vfe1", - "vfe2", - "vfe_lite0", - "vfe_lite1"; - - interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &cnoc2 SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>, - <&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "ahb", - "hf_0"; - - iommus = <&apps_smmu 0x800 0x4e0>; - - power-domains = <&camcc CAM_CC_IFE_0_GDSC>, - <&camcc CAM_CC_IFE_1_GDSC>, - <&camcc CAM_CC_IFE_2_GDSC>, - <&camcc CAM_CC_TITAN_TOP_GDSC>; - power-domain-names = "ife0", - "ife1", - "ife2", - "top"; - - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - }; - - port@1 { - reg = <1>; - }; - - port@2 { - reg = <2>; - }; - - port@3 { - reg = <3>; - }; - - port@4 { - reg = <4>; - }; - }; - }; - - camcc: clock-controller@ad00000 { - compatible = "qcom,sc7280-camcc"; - reg = <0 0x0ad00000 0 0x10000>; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&rpmhcc RPMH_CXO_CLK_A>, - <&sleep_clk>; - clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; - - dispcc: clock-controller@af00000 { - compatible = "qcom,sc7280-dispcc"; - reg = <0 0x0af00000 0 0x20000>; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_DISP_GPLL0_CLK_SRC>, - <&mdss_dsi_phy DSI_BYTE_PLL_CLK>, - <&mdss_dsi_phy DSI_PIXEL_PLL_CLK>, - <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, - <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, - <&mdss_edp_phy 0>, - <&mdss_edp_phy 1>; - clock-names = "bi_tcxo", - "gcc_disp_gpll0_clk", - "dsi0_phy_pll_out_byteclk", - "dsi0_phy_pll_out_dsiclk", - "dp_phy_pll_link_clk", - "dp_phy_pll_vco_div_clk", - "edp_phy_pll_link_clk", - "edp_phy_pll_vco_div_clk"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; - - mdss: display-subsystem@ae00000 { - compatible = "qcom,sc7280-mdss"; - reg = <0 0x0ae00000 0 0x1000>; - reg-names = "mdss"; - - power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>; - - clocks = <&gcc GCC_DISP_AHB_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>; - clock-names = "iface", - "ahb", - "core"; - - interrupts = ; - interrupt-controller; - #interrupt-cells = <1>; - - interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &cnoc2 SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "mdp0-mem", - "cpu-cfg"; - - iommus = <&apps_smmu 0x900 0x402>; - - resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; - - #address-cells = <2>; - #size-cells = <2>; - ranges; - - status = "disabled"; - - mdss_mdp: display-controller@ae01000 { - compatible = "qcom,sc7280-dpu"; - reg = <0 0x0ae01000 0 0x8f030>, - <0 0x0aeb0000 0 0x3000>; - reg-names = "mdp", "vbif"; - - clocks = <&gcc GCC_DISP_HF_AXI_CLK>, - <&gcc GCC_DISP_SF_AXI_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, - <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>; - clock-names = "bus", - "nrt_bus", - "iface", - "lut", - "core", - "vsync"; - assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>; - assigned-clock-rates = <19200000>, - <19200000>; - operating-points-v2 = <&mdp_opp_table>; - power-domains = <&rpmhpd SC7280_CX>; - - interrupt-parent = <&mdss>; - interrupts = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dpu_intf1_out: endpoint { - remote-endpoint = <&mdss_dsi0_in>; - }; - }; - - port@1 { - reg = <1>; - dpu_intf5_out: endpoint { - remote-endpoint = <&edp_in>; - }; - }; - - port@2 { - reg = <2>; - dpu_intf0_out: endpoint { - remote-endpoint = <&dp_in>; - }; - }; - }; - - mdp_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-380000000 { - opp-hz = /bits/ 64 <380000000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - - opp-506666667 { - opp-hz = /bits/ 64 <506666667>; - required-opps = <&rpmhpd_opp_nom>; - }; - - opp-608000000 { - opp-hz = /bits/ 64 <608000000>; - required-opps = <&rpmhpd_opp_turbo>; - }; - }; - }; - - mdss_dsi: dsi@ae94000 { - compatible = "qcom,sc7280-dsi-ctrl", - "qcom,mdss-dsi-ctrl"; - reg = <0 0x0ae94000 0 0x400>; - reg-names = "dsi_ctrl"; - - interrupt-parent = <&mdss>; - interrupts = <4>; - - clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, - <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, - <&dispcc DISP_CC_MDSS_PCLK0_CLK>, - <&dispcc DISP_CC_MDSS_ESC0_CLK>, - <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&gcc GCC_DISP_HF_AXI_CLK>; - clock-names = "byte", - "byte_intf", - "pixel", - "core", - "iface", - "bus"; - - assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, - <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; - assigned-clock-parents = <&mdss_dsi_phy DSI_BYTE_PLL_CLK>, - <&mdss_dsi_phy DSI_PIXEL_PLL_CLK>; - - operating-points-v2 = <&dsi_opp_table>; - power-domains = <&rpmhpd SC7280_CX>; - - phys = <&mdss_dsi_phy>; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mdss_dsi0_in: endpoint { - remote-endpoint = <&dpu_intf1_out>; - }; - }; - - port@1 { - reg = <1>; - mdss_dsi0_out: endpoint { - }; - }; - }; - - dsi_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-187500000 { - opp-hz = /bits/ 64 <187500000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-358000000 { - opp-hz = /bits/ 64 <358000000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - }; - }; - - mdss_dsi_phy: phy@ae94400 { - compatible = "qcom,sc7280-dsi-phy-7nm"; - reg = <0 0x0ae94400 0 0x200>, - <0 0x0ae94600 0 0x280>, - <0 0x0ae94900 0 0x280>; - reg-names = "dsi_phy", - "dsi_phy_lane", - "dsi_pll"; - - #clock-cells = <1>; - #phy-cells = <0>; - - clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "iface", "ref"; - - status = "disabled"; - }; - - mdss_edp: edp@aea0000 { - compatible = "qcom,sc7280-edp"; - pinctrl-names = "default"; - pinctrl-0 = <&edp_hot_plug_det>; - - reg = <0 0x0aea0000 0 0x200>, - <0 0x0aea0200 0 0x200>, - <0 0x0aea0400 0 0xc00>, - <0 0x0aea1000 0 0x400>, - <0 0x0aea1400 0 0x400>; - - interrupt-parent = <&mdss>; - interrupts = <14>; - - clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>, - <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>, - <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>, - <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>; - clock-names = "core_iface", - "core_aux", - "ctrl_link", - "ctrl_link_iface", - "stream_pixel"; - assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>, - <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>; - assigned-clock-parents = <&mdss_edp_phy 0>, <&mdss_edp_phy 1>; - - phys = <&mdss_edp_phy>; - phy-names = "dp"; - - operating-points-v2 = <&edp_opp_table>; - power-domains = <&rpmhpd SC7280_CX>; - - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - edp_in: endpoint { - remote-endpoint = <&dpu_intf5_out>; - }; - }; - - port@1 { - reg = <1>; - mdss_edp_out: endpoint { }; - }; - }; - - edp_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-270000000 { - opp-hz = /bits/ 64 <270000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-540000000 { - opp-hz = /bits/ 64 <540000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - - opp-810000000 { - opp-hz = /bits/ 64 <810000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - }; - - mdss_edp_phy: phy@aec2a00 { - compatible = "qcom,sc7280-edp-phy"; - - reg = <0 0x0aec2a00 0 0x19c>, - <0 0x0aec2200 0 0xa0>, - <0 0x0aec2600 0 0xa0>, - <0 0x0aec2000 0 0x1c0>; - - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_EDP_CLKREF_EN>; - clock-names = "aux", - "cfg_ahb"; - - #clock-cells = <1>; - #phy-cells = <0>; - - status = "disabled"; - }; - - mdss_dp: displayport-controller@ae90000 { - compatible = "qcom,sc7280-dp"; - - reg = <0 0x0ae90000 0 0x200>, - <0 0x0ae90200 0 0x200>, - <0 0x0ae90400 0 0xc00>, - <0 0x0ae91000 0 0x400>, - <0 0x0ae91400 0 0x400>; - - interrupt-parent = <&mdss>; - interrupts = <12>; - - clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, - <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, - <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, - <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, - <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; - clock-names = "core_iface", - "core_aux", - "ctrl_link", - "ctrl_link_iface", - "stream_pixel"; - assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, - <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; - assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, - <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; - phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; - phy-names = "dp"; - - operating-points-v2 = <&dp_opp_table>; - power-domains = <&rpmhpd SC7280_CX>; - - #sound-dai-cells = <0>; - - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - dp_in: endpoint { - remote-endpoint = <&dpu_intf0_out>; - }; - }; - - port@1 { - reg = <1>; - mdss_dp_out: endpoint { - remote-endpoint = <&usb_dp_qmpphy_dp_in>; - }; - }; - }; - - dp_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-160000000 { - opp-hz = /bits/ 64 <160000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-270000000 { - opp-hz = /bits/ 64 <270000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-540000000 { - opp-hz = /bits/ 64 <540000000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - - opp-810000000 { - opp-hz = /bits/ 64 <810000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - }; - }; - - pdc: interrupt-controller@b220000 { - compatible = "qcom,sc7280-pdc", "qcom,pdc"; - reg = <0 0x0b220000 0 0x30000>; - qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>, - <55 306 4>, <59 312 3>, <62 374 2>, - <64 434 2>, <66 438 3>, <69 86 1>, - <70 520 54>, <124 609 31>, <155 63 1>, - <156 716 12>; - #interrupt-cells = <2>; - interrupt-parent = <&intc>; - interrupt-controller; - }; - - pdc_reset: reset-controller@b5e0000 { - compatible = "qcom,sc7280-pdc-global"; - reg = <0 0x0b5e0000 0 0x20000>; - #reset-cells = <1>; - status = "reserved"; /* Owned by firmware */ - }; - - tsens0: thermal-sensor@c263000 { - compatible = "qcom,sc7280-tsens","qcom,tsens-v2"; - reg = <0 0x0c263000 0 0x1ff>, /* TM */ - <0 0x0c222000 0 0x1ff>; /* SROT */ - #qcom,sensors = <15>; - interrupts = , - ; - interrupt-names = "uplow","critical"; - #thermal-sensor-cells = <1>; - }; - - tsens1: thermal-sensor@c265000 { - compatible = "qcom,sc7280-tsens","qcom,tsens-v2"; - reg = <0 0x0c265000 0 0x1ff>, /* TM */ - <0 0x0c223000 0 0x1ff>; /* SROT */ - #qcom,sensors = <12>; - interrupts = , - ; - interrupt-names = "uplow","critical"; - #thermal-sensor-cells = <1>; - }; - - aoss_reset: reset-controller@c2a0000 { - compatible = "qcom,sc7280-aoss-cc", "qcom,sdm845-aoss-cc"; - reg = <0 0x0c2a0000 0 0x31000>; - #reset-cells = <1>; - }; - - aoss_qmp: power-management@c300000 { - compatible = "qcom,sc7280-aoss-qmp", "qcom,aoss-qmp"; - reg = <0 0x0c300000 0 0x400>; - interrupts-extended = <&ipcc IPCC_CLIENT_AOP - IPCC_MPROC_SIGNAL_GLINK_QMP - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_AOP - IPCC_MPROC_SIGNAL_GLINK_QMP>; - - #clock-cells = <0>; - }; - - sram@c3f0000 { - compatible = "qcom,rpmh-stats"; - reg = <0 0x0c3f0000 0 0x400>; - }; - - spmi_bus: spmi@c440000 { - compatible = "qcom,spmi-pmic-arb"; - reg = <0 0x0c440000 0 0x1100>, - <0 0x0c600000 0 0x2000000>, - <0 0x0e600000 0 0x100000>, - <0 0x0e700000 0 0xa0000>, - <0 0x0c40a000 0 0x26000>; - reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; - interrupt-names = "periph_irq"; - interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; - qcom,ee = <0>; - qcom,channel = <0>; - #address-cells = <2>; - #size-cells = <0>; - interrupt-controller; - #interrupt-cells = <4>; - }; - - tlmm: pinctrl@f100000 { - compatible = "qcom,sc7280-pinctrl"; - reg = <0 0x0f100000 0 0x300000>; - interrupts = ; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&tlmm 0 0 175>; - wakeup-parent = <&pdc>; - - cci0_default: cci0-default-state { - pins = "gpio69", "gpio70"; - function = "cci_i2c"; - drive-strength = <2>; - bias-pull-up; - }; - - cci0_sleep: cci0-sleep-state { - pins = "gpio69", "gpio70"; - function = "cci_i2c"; - drive-strength = <2>; - bias-pull-down; - }; - - cci1_default: cci1-default-state { - pins = "gpio71", "gpio72"; - function = "cci_i2c"; - drive-strength = <2>; - bias-pull-up; - }; - - cci1_sleep: cci1-sleep-state { - pins = "gpio71", "gpio72"; - function = "cci_i2c"; - drive-strength = <2>; - bias-pull-down; - }; - - cci2_default: cci2-default-state { - pins = "gpio73", "gpio74"; - function = "cci_i2c"; - drive-strength = <2>; - bias-pull-up; - }; - - cci2_sleep: cci2-sleep-state { - pins = "gpio73", "gpio74"; - function = "cci_i2c"; - drive-strength = <2>; - bias-pull-down; - }; - - cci3_default: cci3-default-state { - pins = "gpio75", "gpio76"; - function = "cci_i2c"; - drive-strength = <2>; - bias-pull-up; - }; - - cci3_sleep: cci3-sleep-state { - pins = "gpio75", "gpio76"; - function = "cci_i2c"; - drive-strength = <2>; - bias-pull-down; - }; - - dp_hot_plug_det: dp-hot-plug-det-state { - pins = "gpio47"; - function = "dp_hot"; - }; - - edp_hot_plug_det: edp-hot-plug-det-state { - pins = "gpio60"; - function = "edp_hot"; - }; - - mi2s0_data0: mi2s0-data0-state { - pins = "gpio98"; - function = "mi2s0_data0"; - }; - - mi2s0_data1: mi2s0-data1-state { - pins = "gpio99"; - function = "mi2s0_data1"; - }; - - mi2s0_mclk: mi2s0-mclk-state { - pins = "gpio96"; - function = "pri_mi2s"; - }; - - mi2s0_sclk: mi2s0-sclk-state { - pins = "gpio97"; - function = "mi2s0_sck"; - }; - - mi2s0_ws: mi2s0-ws-state { - pins = "gpio100"; - function = "mi2s0_ws"; - }; - - mi2s1_data0: mi2s1-data0-state { - pins = "gpio107"; - function = "mi2s1_data0"; - }; - - mi2s1_sclk: mi2s1-sclk-state { - pins = "gpio106"; - function = "mi2s1_sck"; - }; - - mi2s1_ws: mi2s1-ws-state { - pins = "gpio108"; - function = "mi2s1_ws"; - }; - - pcie0_clkreq_n: pcie0-clkreq-n-state { - pins = "gpio88"; - function = "pcie0_clkreqn"; - }; - - pcie1_clkreq_n: pcie1-clkreq-n-state { - pins = "gpio79"; - function = "pcie1_clkreqn"; - }; - - qspi_clk: qspi-clk-state { - pins = "gpio14"; - function = "qspi_clk"; - }; - - qspi_cs0: qspi-cs0-state { - pins = "gpio15"; - function = "qspi_cs"; - }; - - qspi_cs1: qspi-cs1-state { - pins = "gpio19"; - function = "qspi_cs"; - }; - - qspi_data0: qspi-data0-state { - pins = "gpio12"; - function = "qspi_data"; - }; - - qspi_data1: qspi-data1-state { - pins = "gpio13"; - function = "qspi_data"; - }; - - qspi_data23: qspi-data23-state { - pins = "gpio16", "gpio17"; - function = "qspi_data"; - }; - - qup_i2c0_data_clk: qup-i2c0-data-clk-state { - pins = "gpio0", "gpio1"; - function = "qup00"; - }; - - qup_i2c1_data_clk: qup-i2c1-data-clk-state { - pins = "gpio4", "gpio5"; - function = "qup01"; - }; - - qup_i2c2_data_clk: qup-i2c2-data-clk-state { - pins = "gpio8", "gpio9"; - function = "qup02"; - }; - - qup_i2c3_data_clk: qup-i2c3-data-clk-state { - pins = "gpio12", "gpio13"; - function = "qup03"; - }; - - qup_i2c4_data_clk: qup-i2c4-data-clk-state { - pins = "gpio16", "gpio17"; - function = "qup04"; - }; - - qup_i2c5_data_clk: qup-i2c5-data-clk-state { - pins = "gpio20", "gpio21"; - function = "qup05"; - }; - - qup_i2c6_data_clk: qup-i2c6-data-clk-state { - pins = "gpio24", "gpio25"; - function = "qup06"; - }; - - qup_i2c7_data_clk: qup-i2c7-data-clk-state { - pins = "gpio28", "gpio29"; - function = "qup07"; - }; - - qup_i2c8_data_clk: qup-i2c8-data-clk-state { - pins = "gpio32", "gpio33"; - function = "qup10"; - }; - - qup_i2c9_data_clk: qup-i2c9-data-clk-state { - pins = "gpio36", "gpio37"; - function = "qup11"; - }; - - qup_i2c10_data_clk: qup-i2c10-data-clk-state { - pins = "gpio40", "gpio41"; - function = "qup12"; - }; - - qup_i2c11_data_clk: qup-i2c11-data-clk-state { - pins = "gpio44", "gpio45"; - function = "qup13"; - }; - - qup_i2c12_data_clk: qup-i2c12-data-clk-state { - pins = "gpio48", "gpio49"; - function = "qup14"; - }; - - qup_i2c13_data_clk: qup-i2c13-data-clk-state { - pins = "gpio52", "gpio53"; - function = "qup15"; - }; - - qup_i2c14_data_clk: qup-i2c14-data-clk-state { - pins = "gpio56", "gpio57"; - function = "qup16"; - }; - - qup_i2c15_data_clk: qup-i2c15-data-clk-state { - pins = "gpio60", "gpio61"; - function = "qup17"; - }; - - qup_spi0_data_clk: qup-spi0-data-clk-state { - pins = "gpio0", "gpio1", "gpio2"; - function = "qup00"; - }; - - qup_spi0_cs: qup-spi0-cs-state { - pins = "gpio3"; - function = "qup00"; - }; - - qup_spi0_cs_gpio: qup-spi0-cs-gpio-state { - pins = "gpio3"; - function = "gpio"; - }; - - qup_spi1_data_clk: qup-spi1-data-clk-state { - pins = "gpio4", "gpio5", "gpio6"; - function = "qup01"; - }; - - qup_spi1_cs: qup-spi1-cs-state { - pins = "gpio7"; - function = "qup01"; - }; - - qup_spi1_cs_gpio: qup-spi1-cs-gpio-state { - pins = "gpio7"; - function = "gpio"; - }; - - qup_spi2_data_clk: qup-spi2-data-clk-state { - pins = "gpio8", "gpio9", "gpio10"; - function = "qup02"; - }; - - qup_spi2_cs: qup-spi2-cs-state { - pins = "gpio11"; - function = "qup02"; - }; - - qup_spi2_cs_gpio: qup-spi2-cs-gpio-state { - pins = "gpio11"; - function = "gpio"; - }; - - qup_spi3_data_clk: qup-spi3-data-clk-state { - pins = "gpio12", "gpio13", "gpio14"; - function = "qup03"; - }; - - qup_spi3_cs: qup-spi3-cs-state { - pins = "gpio15"; - function = "qup03"; - }; - - qup_spi3_cs_gpio: qup-spi3-cs-gpio-state { - pins = "gpio15"; - function = "gpio"; - }; - - qup_spi4_data_clk: qup-spi4-data-clk-state { - pins = "gpio16", "gpio17", "gpio18"; - function = "qup04"; - }; - - qup_spi4_cs: qup-spi4-cs-state { - pins = "gpio19"; - function = "qup04"; - }; - - qup_spi4_cs_gpio: qup-spi4-cs-gpio-state { - pins = "gpio19"; - function = "gpio"; - }; - - qup_spi5_data_clk: qup-spi5-data-clk-state { - pins = "gpio20", "gpio21", "gpio22"; - function = "qup05"; - }; - - qup_spi5_cs: qup-spi5-cs-state { - pins = "gpio23"; - function = "qup05"; - }; - - qup_spi5_cs_gpio: qup-spi5-cs-gpio-state { - pins = "gpio23"; - function = "gpio"; - }; - - qup_spi6_data_clk: qup-spi6-data-clk-state { - pins = "gpio24", "gpio25", "gpio26"; - function = "qup06"; - }; - - qup_spi6_cs: qup-spi6-cs-state { - pins = "gpio27"; - function = "qup06"; - }; - - qup_spi6_cs_gpio: qup-spi6-cs-gpio-state { - pins = "gpio27"; - function = "gpio"; - }; - - qup_spi7_data_clk: qup-spi7-data-clk-state { - pins = "gpio28", "gpio29", "gpio30"; - function = "qup07"; - }; - - qup_spi7_cs: qup-spi7-cs-state { - pins = "gpio31"; - function = "qup07"; - }; - - qup_spi7_cs_gpio: qup-spi7-cs-gpio-state { - pins = "gpio31"; - function = "gpio"; - }; - - qup_spi8_data_clk: qup-spi8-data-clk-state { - pins = "gpio32", "gpio33", "gpio34"; - function = "qup10"; - }; - - qup_spi8_cs: qup-spi8-cs-state { - pins = "gpio35"; - function = "qup10"; - }; - - qup_spi8_cs_gpio: qup-spi8-cs-gpio-state { - pins = "gpio35"; - function = "gpio"; - }; - - qup_spi9_data_clk: qup-spi9-data-clk-state { - pins = "gpio36", "gpio37", "gpio38"; - function = "qup11"; - }; - - qup_spi9_cs: qup-spi9-cs-state { - pins = "gpio39"; - function = "qup11"; - }; - - qup_spi9_cs_gpio: qup-spi9-cs-gpio-state { - pins = "gpio39"; - function = "gpio"; - }; - - qup_spi10_data_clk: qup-spi10-data-clk-state { - pins = "gpio40", "gpio41", "gpio42"; - function = "qup12"; - }; - - qup_spi10_cs: qup-spi10-cs-state { - pins = "gpio43"; - function = "qup12"; - }; - - qup_spi10_cs_gpio: qup-spi10-cs-gpio-state { - pins = "gpio43"; - function = "gpio"; - }; - - qup_spi11_data_clk: qup-spi11-data-clk-state { - pins = "gpio44", "gpio45", "gpio46"; - function = "qup13"; - }; - - qup_spi11_cs: qup-spi11-cs-state { - pins = "gpio47"; - function = "qup13"; - }; - - qup_spi11_cs_gpio: qup-spi11-cs-gpio-state { - pins = "gpio47"; - function = "gpio"; - }; - - qup_spi12_data_clk: qup-spi12-data-clk-state { - pins = "gpio48", "gpio49", "gpio50"; - function = "qup14"; - }; - - qup_spi12_cs: qup-spi12-cs-state { - pins = "gpio51"; - function = "qup14"; - }; - - qup_spi12_cs_gpio: qup-spi12-cs-gpio-state { - pins = "gpio51"; - function = "gpio"; - }; - - qup_spi13_data_clk: qup-spi13-data-clk-state { - pins = "gpio52", "gpio53", "gpio54"; - function = "qup15"; - }; - - qup_spi13_cs: qup-spi13-cs-state { - pins = "gpio55"; - function = "qup15"; - }; - - qup_spi13_cs_gpio: qup-spi13-cs-gpio-state { - pins = "gpio55"; - function = "gpio"; - }; - - qup_spi14_data_clk: qup-spi14-data-clk-state { - pins = "gpio56", "gpio57", "gpio58"; - function = "qup16"; - }; - - qup_spi14_cs: qup-spi14-cs-state { - pins = "gpio59"; - function = "qup16"; - }; - - qup_spi14_cs_gpio: qup-spi14-cs-gpio-state { - pins = "gpio59"; - function = "gpio"; - }; - - qup_spi15_data_clk: qup-spi15-data-clk-state { - pins = "gpio60", "gpio61", "gpio62"; - function = "qup17"; - }; - - qup_spi15_cs: qup-spi15-cs-state { - pins = "gpio63"; - function = "qup17"; - }; - - qup_spi15_cs_gpio: qup-spi15-cs-gpio-state { - pins = "gpio63"; - function = "gpio"; - }; - - qup_uart0_cts: qup-uart0-cts-state { - pins = "gpio0"; - function = "qup00"; - }; - - qup_uart0_rts: qup-uart0-rts-state { - pins = "gpio1"; - function = "qup00"; - }; - - qup_uart0_tx: qup-uart0-tx-state { - pins = "gpio2"; - function = "qup00"; - }; - - qup_uart0_rx: qup-uart0-rx-state { - pins = "gpio3"; - function = "qup00"; - }; - - qup_uart1_cts: qup-uart1-cts-state { - pins = "gpio4"; - function = "qup01"; - }; - - qup_uart1_rts: qup-uart1-rts-state { - pins = "gpio5"; - function = "qup01"; - }; - - qup_uart1_tx: qup-uart1-tx-state { - pins = "gpio6"; - function = "qup01"; - }; - - qup_uart1_rx: qup-uart1-rx-state { - pins = "gpio7"; - function = "qup01"; - }; - - qup_uart2_cts: qup-uart2-cts-state { - pins = "gpio8"; - function = "qup02"; - }; - - qup_uart2_rts: qup-uart2-rts-state { - pins = "gpio9"; - function = "qup02"; - }; - - qup_uart2_tx: qup-uart2-tx-state { - pins = "gpio10"; - function = "qup02"; - }; - - qup_uart2_rx: qup-uart2-rx-state { - pins = "gpio11"; - function = "qup02"; - }; - - qup_uart3_cts: qup-uart3-cts-state { - pins = "gpio12"; - function = "qup03"; - }; - - qup_uart3_rts: qup-uart3-rts-state { - pins = "gpio13"; - function = "qup03"; - }; - - qup_uart3_tx: qup-uart3-tx-state { - pins = "gpio14"; - function = "qup03"; - }; - - qup_uart3_rx: qup-uart3-rx-state { - pins = "gpio15"; - function = "qup03"; - }; - - qup_uart4_cts: qup-uart4-cts-state { - pins = "gpio16"; - function = "qup04"; - }; - - qup_uart4_rts: qup-uart4-rts-state { - pins = "gpio17"; - function = "qup04"; - }; - - qup_uart4_tx: qup-uart4-tx-state { - pins = "gpio18"; - function = "qup04"; - }; - - qup_uart4_rx: qup-uart4-rx-state { - pins = "gpio19"; - function = "qup04"; - }; - - qup_uart5_tx: qup-uart5-tx-state { - pins = "gpio22"; - function = "qup05"; - }; - - qup_uart5_rx: qup-uart5-rx-state { - pins = "gpio23"; - function = "qup05"; - }; - - qup_uart6_cts: qup-uart6-cts-state { - pins = "gpio24"; - function = "qup06"; - }; - - qup_uart6_rts: qup-uart6-rts-state { - pins = "gpio25"; - function = "qup06"; - }; - - qup_uart6_tx: qup-uart6-tx-state { - pins = "gpio26"; - function = "qup06"; - }; - - qup_uart6_rx: qup-uart6-rx-state { - pins = "gpio27"; - function = "qup06"; - }; - - qup_uart7_cts: qup-uart7-cts-state { - pins = "gpio28"; - function = "qup07"; - }; - - qup_uart7_rts: qup-uart7-rts-state { - pins = "gpio29"; - function = "qup07"; - }; - - qup_uart7_tx: qup-uart7-tx-state { - pins = "gpio30"; - function = "qup07"; - }; - - qup_uart7_rx: qup-uart7-rx-state { - pins = "gpio31"; - function = "qup07"; - }; - - qup_uart8_cts: qup-uart8-cts-state { - pins = "gpio32"; - function = "qup10"; - }; - - qup_uart8_rts: qup-uart8-rts-state { - pins = "gpio33"; - function = "qup10"; - }; - - qup_uart8_tx: qup-uart8-tx-state { - pins = "gpio34"; - function = "qup10"; - }; - - qup_uart8_rx: qup-uart8-rx-state { - pins = "gpio35"; - function = "qup10"; - }; - - qup_uart9_cts: qup-uart9-cts-state { - pins = "gpio36"; - function = "qup11"; - }; - - qup_uart9_rts: qup-uart9-rts-state { - pins = "gpio37"; - function = "qup11"; - }; - - qup_uart9_tx: qup-uart9-tx-state { - pins = "gpio38"; - function = "qup11"; - }; - - qup_uart9_rx: qup-uart9-rx-state { - pins = "gpio39"; - function = "qup11"; - }; - - qup_uart10_cts: qup-uart10-cts-state { - pins = "gpio40"; - function = "qup12"; - }; - - qup_uart10_rts: qup-uart10-rts-state { - pins = "gpio41"; - function = "qup12"; - }; - - qup_uart10_tx: qup-uart10-tx-state { - pins = "gpio42"; - function = "qup12"; - }; - - qup_uart10_rx: qup-uart10-rx-state { - pins = "gpio43"; - function = "qup12"; - }; - - qup_uart11_cts: qup-uart11-cts-state { - pins = "gpio44"; - function = "qup13"; - }; - - qup_uart11_rts: qup-uart11-rts-state { - pins = "gpio45"; - function = "qup13"; - }; - - qup_uart11_tx: qup-uart11-tx-state { - pins = "gpio46"; - function = "qup13"; - }; - - qup_uart11_rx: qup-uart11-rx-state { - pins = "gpio47"; - function = "qup13"; - }; - - qup_uart12_cts: qup-uart12-cts-state { - pins = "gpio48"; - function = "qup14"; - }; - - qup_uart12_rts: qup-uart12-rts-state { - pins = "gpio49"; - function = "qup14"; - }; - - qup_uart12_tx: qup-uart12-tx-state { - pins = "gpio50"; - function = "qup14"; - }; - - qup_uart12_rx: qup-uart12-rx-state { - pins = "gpio51"; - function = "qup14"; - }; - - qup_uart13_cts: qup-uart13-cts-state { - pins = "gpio52"; - function = "qup15"; - }; - - qup_uart13_rts: qup-uart13-rts-state { - pins = "gpio53"; - function = "qup15"; - }; - - qup_uart13_tx: qup-uart13-tx-state { - pins = "gpio54"; - function = "qup15"; - }; - - qup_uart13_rx: qup-uart13-rx-state { - pins = "gpio55"; - function = "qup15"; - }; - - qup_uart14_cts: qup-uart14-cts-state { - pins = "gpio56"; - function = "qup16"; - }; - - qup_uart14_rts: qup-uart14-rts-state { - pins = "gpio57"; - function = "qup16"; - }; - - qup_uart14_tx: qup-uart14-tx-state { - pins = "gpio58"; - function = "qup16"; - }; - - qup_uart14_rx: qup-uart14-rx-state { - pins = "gpio59"; - function = "qup16"; - }; - - qup_uart15_cts: qup-uart15-cts-state { - pins = "gpio60"; - function = "qup17"; - }; - - qup_uart15_rts: qup-uart15-rts-state { - pins = "gpio61"; - function = "qup17"; - }; - - qup_uart15_tx: qup-uart15-tx-state { - pins = "gpio62"; - function = "qup17"; - }; - - qup_uart15_rx: qup-uart15-rx-state { - pins = "gpio63"; - function = "qup17"; - }; - - sdc1_clk: sdc1-clk-state { - pins = "sdc1_clk"; - }; - - sdc1_cmd: sdc1-cmd-state { - pins = "sdc1_cmd"; - }; - - sdc1_data: sdc1-data-state { - pins = "sdc1_data"; - }; - - sdc1_rclk: sdc1-rclk-state { - pins = "sdc1_rclk"; - }; - - sdc1_clk_sleep: sdc1-clk-sleep-state { - pins = "sdc1_clk"; - drive-strength = <2>; - bias-bus-hold; - }; - - sdc1_cmd_sleep: sdc1-cmd-sleep-state { - pins = "sdc1_cmd"; - drive-strength = <2>; - bias-bus-hold; - }; - - sdc1_data_sleep: sdc1-data-sleep-state { - pins = "sdc1_data"; - drive-strength = <2>; - bias-bus-hold; - }; - - sdc1_rclk_sleep: sdc1-rclk-sleep-state { - pins = "sdc1_rclk"; - drive-strength = <2>; - bias-bus-hold; - }; - - sdc2_clk: sdc2-clk-state { - pins = "sdc2_clk"; - }; - - sdc2_cmd: sdc2-cmd-state { - pins = "sdc2_cmd"; - }; - - sdc2_data: sdc2-data-state { - pins = "sdc2_data"; - }; - - sdc2_clk_sleep: sdc2-clk-sleep-state { - pins = "sdc2_clk"; - drive-strength = <2>; - bias-bus-hold; - }; - - sdc2_cmd_sleep: sdc2-cmd-sleep-state { - pins = "sdc2_cmd"; - drive-strength = <2>; - bias-bus-hold; - }; - - sdc2_data_sleep: sdc2-data-sleep-state { - pins = "sdc2_data"; - drive-strength = <2>; - bias-bus-hold; - }; - }; - - sram@146a5000 { - compatible = "qcom,sc7280-imem", "syscon", "simple-mfd"; - reg = <0 0x146a5000 0 0x6000>; - - #address-cells = <1>; - #size-cells = <1>; - - ranges = <0 0 0x146a5000 0x6000>; - - pil-reloc@594c { - compatible = "qcom,pil-reloc-info"; - reg = <0x594c 0xc8>; - }; - }; - - apps_smmu: iommu@15000000 { - compatible = "qcom,sc7280-smmu-500", "arm,mmu-500"; - reg = <0 0x15000000 0 0x100000>; - #iommu-cells = <2>; - #global-interrupts = <1>; - dma-coherent; - interrupts = , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - ; - }; - - anoc_1_tbu: tbu@151dd000 { - compatible = "qcom,sc7280-tbu"; - reg = <0x0 0x151dd000 0x0 0x1000>; - interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>; - qcom,stream-id-range = <&apps_smmu 0x0 0x400>; - }; - - anoc_2_tbu: tbu@151e1000 { - compatible = "qcom,sc7280-tbu"; - reg = <0x0 0x151e1000 0x0 0x1000>; - interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>; - qcom,stream-id-range = <&apps_smmu 0x400 0x400>; - }; - - mnoc_hf_0_tbu: tbu@151e5000 { - compatible = "qcom,sc7280-tbu"; - reg = <0x0 0x151e5000 0x0 0x1000>; - interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; - power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_HF0_GDSC>; - qcom,stream-id-range = <&apps_smmu 0x800 0x400>; - }; - - mnoc_hf_1_tbu: tbu@151e9000 { - compatible = "qcom,sc7280-tbu"; - reg = <0x0 0x151e9000 0x0 0x1000>; - interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; - power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_HF1_GDSC>; - qcom,stream-id-range = <&apps_smmu 0xc00 0x400>; - }; - - compute_dsp_1_tbu: tbu@151ed000 { - compatible = "qcom,sc7280-tbu"; - reg = <0x0 0x151ed000 0x0 0x1000>; - interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; - power-domains = <&gcc HLOS1_VOTE_TURING_MMU_TBU1_GDSC>; - qcom,stream-id-range = <&apps_smmu 0x1000 0x400>; - }; - - compute_dsp_0_tbu: tbu@151f1000 { - compatible = "qcom,sc7280-tbu"; - reg = <0x0 0x151f1000 0x0 0x1000>; - interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; - power-domains = <&gcc HLOS1_VOTE_TURING_MMU_TBU0_GDSC>; - qcom,stream-id-range = <&apps_smmu 0x1400 0x400>; - }; - - adsp_tbu: tbu@151f5000 { - compatible = "qcom,sc7280-tbu"; - reg = <0x0 0x151f5000 0x0 0x1000>; - interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &lpass_ag_noc SLAVE_LPASS_CORE_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; - qcom,stream-id-range = <&apps_smmu 0x1800 0x400>; - }; - - anoc_1_pcie_tbu: tbu@151f9000 { - compatible = "qcom,sc7280-tbu"; - reg = <0x0 0x151f9000 0x0 0x1000>; - interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &cnoc3 SLAVE_TCU QCOM_ICC_TAG_ACTIVE_ONLY>; - qcom,stream-id-range = <&apps_smmu 0x1c00 0x400>; - }; - - mnoc_sf_0_tbu: tbu@151fd000 { - compatible = "qcom,sc7280-tbu"; - reg = <0x0 0x151fd000 0x0 0x1000>; - interconnects = <&mmss_noc MASTER_CAMNOC_SF QCOM_ICC_TAG_ACTIVE_ONLY - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; - power-domains = <&gcc HLOS1_VOTE_MMNOC_MMU_TBU_SF0_GDSC>; - qcom,stream-id-range = <&apps_smmu 0x2000 0x400>; - }; - - intc: interrupt-controller@17a00000 { - compatible = "arm,gic-v3"; - reg = <0 0x17a00000 0 0x10000>, /* GICD */ - <0 0x17a60000 0 0x100000>; /* GICR * 8 */ - interrupts = ; - #interrupt-cells = <3>; - interrupt-controller; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - msi-controller@17a40000 { - compatible = "arm,gic-v3-its"; - reg = <0 0x17a40000 0 0x20000>; - msi-controller; - #msi-cells = <1>; - status = "disabled"; - }; - }; - - watchdog: watchdog@17c10000 { - compatible = "qcom,apss-wdt-sc7280", "qcom,kpss-wdt"; - reg = <0 0x17c10000 0 0x1000>; - clocks = <&sleep_clk>; - interrupts = ; - status = "reserved"; /* Owned by Gunyah hyp */ - }; - - timer@17c20000 { - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0 0 0x20000000>; - compatible = "arm,armv7-timer-mem"; - reg = <0 0x17c20000 0 0x1000>; - - frame@17c21000 { - frame-number = <0>; - interrupts = , - ; - reg = <0x17c21000 0x1000>, - <0x17c22000 0x1000>; - }; - - frame@17c23000 { - frame-number = <1>; - interrupts = ; - reg = <0x17c23000 0x1000>; - status = "disabled"; - }; - - frame@17c25000 { - frame-number = <2>; - interrupts = ; - reg = <0x17c25000 0x1000>; - status = "disabled"; - }; - - frame@17c27000 { - frame-number = <3>; - interrupts = ; - reg = <0x17c27000 0x1000>; - status = "disabled"; - }; - - frame@17c29000 { - frame-number = <4>; - interrupts = ; - reg = <0x17c29000 0x1000>; - status = "disabled"; - }; - - frame@17c2b000 { - frame-number = <5>; - interrupts = ; - reg = <0x17c2b000 0x1000>; - status = "disabled"; - }; - - frame@17c2d000 { - frame-number = <6>; - interrupts = ; - reg = <0x17c2d000 0x1000>; - status = "disabled"; - }; - }; - - apps_rsc: rsc@18200000 { - compatible = "qcom,rpmh-rsc"; - reg = <0 0x18200000 0 0x10000>, - <0 0x18210000 0 0x10000>, - <0 0x18220000 0 0x10000>; - reg-names = "drv-0", "drv-1", "drv-2"; - interrupts = , - , - ; - qcom,tcs-offset = <0xd00>; - qcom,drv-id = <2>; - qcom,tcs-config = , - , - , - ; - power-domains = <&cluster_pd>; - - apps_bcm_voter: bcm-voter { - compatible = "qcom,bcm-voter"; - }; - - rpmhpd: power-controller { - compatible = "qcom,sc7280-rpmhpd"; - #power-domain-cells = <1>; - operating-points-v2 = <&rpmhpd_opp_table>; - - rpmhpd_opp_table: opp-table { - compatible = "operating-points-v2"; - - rpmhpd_opp_ret: opp1 { - opp-level = ; - }; - - rpmhpd_opp_low_svs: opp2 { - opp-level = ; - }; - - rpmhpd_opp_svs: opp3 { - opp-level = ; - }; - - rpmhpd_opp_svs_l1: opp4 { - opp-level = ; - }; - - rpmhpd_opp_svs_l2: opp5 { - opp-level = ; - }; - - rpmhpd_opp_nom: opp6 { - opp-level = ; - }; - - rpmhpd_opp_nom_l1: opp7 { - opp-level = ; - }; - - rpmhpd_opp_turbo: opp8 { - opp-level = ; - }; - - rpmhpd_opp_turbo_l1: opp9 { - opp-level = ; - }; - }; - }; - - rpmhcc: clock-controller { - compatible = "qcom,sc7280-rpmh-clk"; - clocks = <&xo_board>; - clock-names = "xo"; - #clock-cells = <1>; - }; - }; - - epss_l3: interconnect@18590000 { - compatible = "qcom,sc7280-epss-l3", "qcom,epss-l3"; - reg = <0 0x18590000 0 0x1000>; - clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; - clock-names = "xo", "alternate"; - #interconnect-cells = <1>; - }; - - cpufreq_hw: cpufreq@18591000 { - compatible = "qcom,sc7280-cpufreq-epss", "qcom,cpufreq-epss"; - reg = <0 0x18591000 0 0x1000>, - <0 0x18592000 0 0x1000>, - <0 0x18593000 0 0x1000>; - - interrupts = , - , - ; - interrupt-names = "dcvsh-irq-0", - "dcvsh-irq-1", - "dcvsh-irq-2"; - - clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; - clock-names = "xo", "alternate"; - #freq-domain-cells = <1>; - #clock-cells = <1>; - }; - }; - - sound: sound { - }; - - thermal_zones: thermal-zones { - cpu0-thermal { - polling-delay-passive = <250>; - - thermal-sensors = <&tsens0 1>; - - trips { - cpu0_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu0_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu0_crit: cpu-crit { - temperature = <110000>; - hysteresis = <0>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu0_alert0>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu0_alert1>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - cpu1-thermal { - polling-delay-passive = <250>; - - thermal-sensors = <&tsens0 2>; - - trips { - cpu1_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu1_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu1_crit: cpu-crit { - temperature = <110000>; - hysteresis = <0>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu1_alert0>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu1_alert1>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - cpu2-thermal { - polling-delay-passive = <250>; - - thermal-sensors = <&tsens0 3>; - - trips { - cpu2_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu2_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu2_crit: cpu-crit { - temperature = <110000>; - hysteresis = <0>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu2_alert0>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu2_alert1>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - cpu3-thermal { - polling-delay-passive = <250>; - - thermal-sensors = <&tsens0 4>; - - trips { - cpu3_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu3_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu3_crit: cpu-crit { - temperature = <110000>; - hysteresis = <0>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu3_alert0>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu3_alert1>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - cpu4-thermal { - polling-delay-passive = <250>; - - thermal-sensors = <&tsens0 7>; - - trips { - cpu4_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu4_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu4_crit: cpu-crit { - temperature = <110000>; - hysteresis = <0>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu4_alert0>; - cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu4_alert1>; - cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - cpu5-thermal { - polling-delay-passive = <250>; - - thermal-sensors = <&tsens0 8>; - - trips { - cpu5_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu5_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu5_crit: cpu-crit { - temperature = <110000>; - hysteresis = <0>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu5_alert0>; - cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu5_alert1>; - cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - cpu6-thermal { - polling-delay-passive = <250>; - - thermal-sensors = <&tsens0 9>; - - trips { - cpu6_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu6_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu6_crit: cpu-crit { - temperature = <110000>; - hysteresis = <0>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu6_alert0>; - cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu6_alert1>; - cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - cpu7-thermal { - polling-delay-passive = <250>; - - thermal-sensors = <&tsens0 10>; - - trips { - cpu7_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu7_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu7_crit: cpu-crit { - temperature = <110000>; - hysteresis = <0>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu7_alert0>; - cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu7_alert1>; - cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - cpu8-thermal { - polling-delay-passive = <250>; - - thermal-sensors = <&tsens0 11>; - - trips { - cpu8_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu8_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu8_crit: cpu-crit { - temperature = <110000>; - hysteresis = <0>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu8_alert0>; - cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu8_alert1>; - cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - cpu9-thermal { - polling-delay-passive = <250>; - - thermal-sensors = <&tsens0 12>; - - trips { - cpu9_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu9_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu9_crit: cpu-crit { - temperature = <110000>; - hysteresis = <0>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu9_alert0>; - cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu9_alert1>; - cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - cpu10-thermal { - polling-delay-passive = <250>; - - thermal-sensors = <&tsens0 13>; - - trips { - cpu10_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu10_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu10_crit: cpu-crit { - temperature = <110000>; - hysteresis = <0>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu10_alert0>; - cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu10_alert1>; - cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - cpu11-thermal { - polling-delay-passive = <250>; - - thermal-sensors = <&tsens0 14>; - - trips { - cpu11_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu11_alert1: trip-point1 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu11_crit: cpu-crit { - temperature = <110000>; - hysteresis = <0>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu11_alert0>; - cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu11_alert1>; - cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - aoss0-thermal { - polling-delay-passive = <0>; - - thermal-sensors = <&tsens0 0>; - - trips { - aoss0_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - - aoss0_crit: aoss0-crit { - temperature = <110000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - - aoss1-thermal { - polling-delay-passive = <0>; - - thermal-sensors = <&tsens1 0>; - - trips { - aoss1_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - - aoss1_crit: aoss1-crit { - temperature = <110000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - - cpuss0-thermal { - polling-delay-passive = <0>; - - thermal-sensors = <&tsens0 5>; - - trips { - cpuss0_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - cpuss0_crit: cluster0-crit { - temperature = <110000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - - cpuss1-thermal { - polling-delay-passive = <0>; - - thermal-sensors = <&tsens0 6>; - - trips { - cpuss1_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - cpuss1_crit: cluster0-crit { - temperature = <110000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - - gpuss0-thermal { - polling-delay-passive = <100>; - - thermal-sensors = <&tsens1 1>; - - trips { - gpuss0_alert0: trip-point0 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - gpuss0_crit: gpuss0-crit { - temperature = <110000>; - hysteresis = <0>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&gpuss0_alert0>; - cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - gpuss1-thermal { - polling-delay-passive = <100>; - - thermal-sensors = <&tsens1 2>; - - trips { - gpuss1_alert0: trip-point0 { - temperature = <95000>; - hysteresis = <2000>; - type = "passive"; - }; - - gpuss1_crit: gpuss1-crit { - temperature = <110000>; - hysteresis = <0>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&gpuss1_alert0>; - cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - nspss0-thermal { - thermal-sensors = <&tsens1 3>; - - trips { - nspss0_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - - nspss0_crit: nspss0-crit { - temperature = <110000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - - nspss1-thermal { - thermal-sensors = <&tsens1 4>; - - trips { - nspss1_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - - nspss1_crit: nspss1-crit { - temperature = <110000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - - video-thermal { - thermal-sensors = <&tsens1 5>; - - trips { - video_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - - video_crit: video-crit { - temperature = <110000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - - ddr-thermal { - thermal-sensors = <&tsens1 6>; - - trips { - ddr_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - - ddr_crit: ddr-crit { - temperature = <110000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - - mdmss0-thermal { - thermal-sensors = <&tsens1 7>; - - trips { - mdmss0_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - - mdmss0_crit: mdmss0-crit { - temperature = <110000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - - mdmss1-thermal { - thermal-sensors = <&tsens1 8>; - - trips { - mdmss1_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - - mdmss1_crit: mdmss1-crit { - temperature = <110000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - - mdmss2-thermal { - thermal-sensors = <&tsens1 9>; - - trips { - mdmss2_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - - mdmss2_crit: mdmss2-crit { - temperature = <110000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - - mdmss3-thermal { - thermal-sensors = <&tsens1 10>; - - trips { - mdmss3_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - - mdmss3_crit: mdmss3-crit { - temperature = <110000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - - camera0-thermal { - thermal-sensors = <&tsens1 11>; - - trips { - camera0_alert0: trip-point0 { - temperature = <90000>; - hysteresis = <2000>; - type = "hot"; - }; - - camera0_crit: camera0-crit { - temperature = <110000>; - hysteresis = <0>; - type = "critical"; - }; - }; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = , - , - , - ; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts index 08d0784d0cbb89..d86a31ddede29d 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts @@ -151,11 +151,6 @@ adsp_mem: adsp-region@90800000 { no-map; }; - gpu_mem: gpu-region@98715000 { - reg = <0x0 0x98715000 0x0 0x2000>; - no-map; - }; - cdsp_mem: cdsp-region@98900000 { reg = <0x0 0x98900000 0x0 0x1400000>; no-map; @@ -355,11 +350,10 @@ vreg_l16e_3p0: ldo16 { &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sc8180x/LENOVO/82AK/qcdxkmsuc8180.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sc8180x/LENOVO/82AK/qcdxkmsuc8180.mbn"; }; &i2c1 { diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts index 93de9fe918ebda..aff398390eba77 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts @@ -14,6 +14,8 @@ #include "sc8180x.dtsi" #include "sc8180x-pmics.dtsi" +/delete-node/ &gpu_mem; + / { model = "Qualcomm SC8180x Primus"; compatible = "qcom,sc8180x-primus", "qcom,sc8180x"; @@ -442,11 +444,10 @@ vreg_l16e_3p0: ldo16 { &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn"; }; &i2c1 { diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi index 85c2afcb417def..8319d892c6e490 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi @@ -646,6 +646,11 @@ reserved@89b00000 { no-map; }; + gpu_mem: memory@98715000 { + reg = <0x0 0x98715000 0x0 0x2000>; + no-map; + }; + reserved@9d400000 { reg = <0x0 0x9d400000 0x0 0x1000000>; no-map; @@ -2274,6 +2279,10 @@ gpu: gpu@2c00000 { status = "disabled"; + gpu_zap_shader: zap-shader { + memory-region = <&gpu_mem>; + }; + gpu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -2530,6 +2539,12 @@ usb_mp_hsphy1: phy@88e5000 { status = "disabled"; }; + refgen: regulator@88e7000 { + compatible = "qcom,sc8180x-refgen-regulator", + "qcom,sdm845-refgen-regulator"; + reg = <0x0 0x088e7000 0x0 0x60>; + }; + usb_prim_qmpphy: phy@88e8000 { compatible = "qcom,sc8180x-qmp-usb3-dp-phy"; reg = <0 0x088e8000 0 0x3000>; @@ -3116,6 +3131,8 @@ mdss_dsi0: dsi@ae94000 { phys = <&mdss_dsi0_phy>; phy-names = "dsi"; + refgen-supply = <&refgen>; + status = "disabled"; ports { @@ -3203,6 +3220,8 @@ mdss_dsi1: dsi@ae96000 { phys = <&mdss_dsi1_phy>; phy-names = "dsi"; + refgen-supply = <&refgen>; + status = "disabled"; ports { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index 490e970c54a242..c53e00cae465a6 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -225,11 +225,6 @@ vreg_wwan: regulator-wwan { }; reserved-memory { - gpu_mem: gpu-mem@8bf00000 { - reg = <0 0x8bf00000 0 0x2000>; - no-map; - }; - linux,cma { compatible = "shared-dma-pool"; size = <0x0 0x8000000>; @@ -509,11 +504,10 @@ &gpi_dma2 { &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sc8280xp/qcdxkmsuc8280.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sc8280xp/qcdxkmsuc8280.mbn"; }; &mdss0 { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-el2.dtso b/arch/arm64/boot/dts/qcom/sc8280xp-el2.dtso index 25d1fa4bc2055e..cff3735a12dde8 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-el2.dtso +++ b/arch/arm64/boot/dts/qcom/sc8280xp-el2.dtso @@ -8,10 +8,8 @@ /plugin/; /* We can't and don't need to use zap shader in EL2 as linux can zap the gpu on it's own. */ -&gpu { - zap-shader { - status = "disabled"; - }; +&gpu_zap_shader { + status = "disabled"; }; /* diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts index 0374251d33291f..9819454abe131b 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts @@ -158,11 +158,6 @@ vreg_wlan: regulator-wlan { }; reserved-memory { - gpu_mem: gpu-mem@8bf00000 { - reg = <0 0x8bf00000 0 0x2000>; - no-map; - }; - linux,cma { compatible = "shared-dma-pool"; size = <0x0 0x8000000>; @@ -600,11 +595,10 @@ &gpi_dma2 { &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sc8280xp/HUAWEI/gaokun3/qcdxkmsuc8280.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sc8280xp/HUAWEI/gaokun3/qcdxkmsuc8280.mbn"; }; &i2c4 { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index 637430719e6d7d..d84ca010ab9dcb 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -83,14 +83,11 @@ leds { pinctrl-names = "default"; pinctrl-0 = <&cam_indicator_en>; - led-camera-indicator { - label = "white:camera-indicator"; + privacy_led: privacy-led { function = LED_FUNCTION_INDICATOR; color = ; gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "none"; default-state = "off"; - /* Reuse as a panic indicator until we get a "camera on" trigger */ panic-indicator; }; }; @@ -283,11 +280,6 @@ vreg_wwan: regulator-wwan { }; reserved-memory { - gpu_mem: gpu-mem@8bf00000 { - reg = <0 0x8bf00000 0 0x2000>; - no-map; - }; - linux,cma { compatible = "shared-dma-pool"; size = <0x0 0x8000000>; @@ -685,6 +677,9 @@ camera@10 { pinctrl-names = "default"; pinctrl-0 = <&cam_rgb_default>; + leds = <&privacy_led>; + led-names = "privacy"; + clocks = <&camcc CAMCC_MCLK3_CLK>; orientation = <0>; /* Front facing */ @@ -722,11 +717,10 @@ &gpi_dma2 { &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcdxkmsuc8280.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sc8280xp/LENOVO/21BX/qcdxkmsuc8280.mbn"; }; &mdss0 { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts index aeed3ef152eba0..f2b4470d4407fb 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts @@ -186,11 +186,6 @@ vreg_wwan: regulator-wwan { }; reserved-memory { - gpu_mem: gpu-mem@8bf00000 { - reg = <0 0x8bf00000 0 0x2000>; - no-map; - }; - linux,cma { compatible = "shared-dma-pool"; size = <0x0 0x8000000>; @@ -462,11 +457,10 @@ &gpi_dma2 { &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sc8280xp/MICROSOFT/SurfacePro9/qcdxkmsuc8280.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sc8280xp/MICROSOFT/SurfacePro9/qcdxkmsuc8280.mbn"; }; &mdss0 { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts index a40dccd70dfda8..00bbeeef6f14dd 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts @@ -227,11 +227,6 @@ vreg_wwan: regulator-wwan { }; reserved-memory { - gpu_mem: gpu-mem@8bf00000 { - reg = <0 0x8bf00000 0 0x2000>; - no-map; - }; - linux,cma { compatible = "shared-dma-pool"; size = <0x0 0x8000000>; @@ -579,11 +574,10 @@ &gpi_dma2 { &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sc8280xp/microsoft/blackrock/qcdxkmsuc8280.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sc8280xp/microsoft/blackrock/qcdxkmsuc8280.mbn"; }; &mdss0 { diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index 279e5e6beae209..5334adebf27824 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -691,6 +691,11 @@ reserved-region@85b00000 { no-map; }; + pil_gpu_mem: gpu-mem@8bf00000 { + reg = <0 0x8bf00000 0 0x2000>; + no-map; + }; + pil_adsp_mem: adsp-region@86c00000 { reg = <0 0x86c00000 0 0x2000000>; no-map; @@ -967,8 +972,8 @@ i2c16: i2c@880000 { <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>, - <&gpi_dma2 1 6 QCOM_GPI_SPI>; + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, + <&gpi_dma2 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -989,8 +994,8 @@ spi16: spi@880000 { <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, - <&gpi_dma2 1 0 QCOM_GPI_I2C>; + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, + <&gpi_dma2 1 0 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1011,8 +1016,8 @@ i2c17: i2c@884000 { <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, - <&gpi_dma2 1 0 QCOM_GPI_SPI>; + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, + <&gpi_dma2 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1033,8 +1038,8 @@ spi17: spi@884000 { <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, - <&gpi_dma2 1 1 QCOM_GPI_I2C>; + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, + <&gpi_dma2 1 1 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1069,8 +1074,8 @@ i2c18: i2c@888000 { <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, - <&gpi_dma2 1 1 QCOM_GPI_SPI>; + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, + <&gpi_dma2 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1091,8 +1096,8 @@ spi18: spi@888000 { <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, - <&gpi_dma2 1 2 QCOM_GPI_I2C>; + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, + <&gpi_dma2 1 2 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1131,8 +1136,8 @@ i2c19: i2c@88c000 { <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, - <&gpi_dma2 1 2 QCOM_GPI_SPI>; + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1153,8 +1158,8 @@ spi19: spi@88c000 { <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, - <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, + <&gpi_dma2 1 3 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1175,8 +1180,8 @@ i2c20: i2c@890000 { <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, - <&gpi_dma2 1 3 QCOM_GPI_SPI>; + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1197,8 +1202,8 @@ spi20: spi@890000 { <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, - <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, + <&gpi_dma2 1 4 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1241,8 +1246,8 @@ spi21: spi@894000 { <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, - <&gpi_dma2 1 4 QCOM_GPI_SPI>; + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, + <&gpi_dma2 1 5 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1285,8 +1290,8 @@ spi22: spi@898000 { <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, - <&gpi_dma2 1 5 QCOM_GPI_SPI>; + dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>, + <&gpi_dma2 1 6 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1338,7 +1343,7 @@ spi23: spi@89c000 { }; }; - gpi_dma0: dma-controller@900000 { + gpi_dma0: dma-controller@900000 { compatible = "qcom,sc8280xp-gpi-dma", "qcom,sm6350-gpi-dma"; reg = <0 0x00900000 0 0x60000>; @@ -1393,8 +1398,8 @@ i2c0: i2c@980000 { <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, - <&gpi_dma0 1 7 QCOM_GPI_I2C>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1415,8 +1420,8 @@ spi0: spi@980000 { <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, - <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1437,8 +1442,8 @@ i2c1: i2c@984000 { <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, - <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1459,8 +1464,8 @@ spi1: spi@984000 { <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, - <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1481,8 +1486,8 @@ i2c2: i2c@988000 { <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, - <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1503,8 +1508,8 @@ spi2: spi@988000 { <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, - <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1539,8 +1544,8 @@ i2c3: i2c@98c000 { <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, - <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1561,8 +1566,8 @@ spi3: spi@98c000 { <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, - <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1583,8 +1588,8 @@ i2c4: i2c@990000 { <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, - <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1605,8 +1610,8 @@ spi4: spi@990000 { <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, - <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1627,8 +1632,8 @@ i2c5: i2c@994000 { <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, - <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1649,8 +1654,8 @@ spi5: spi@994000 { <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, - <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1671,8 +1676,8 @@ i2c6: i2c@998000 { <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, - <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1693,8 +1698,8 @@ spi6: spi@998000 { <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, - <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1715,8 +1720,8 @@ i2c7: i2c@99c000 { <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, - <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, + <&gpi_dma0 1 7 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1800,8 +1805,8 @@ i2c8: i2c@a80000 { <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, - <&gpi_dma1 1 7 QCOM_GPI_I2C>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1822,8 +1827,8 @@ spi8: spi@a80000 { <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, - <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1844,8 +1849,8 @@ i2c9: i2c@a84000 { <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, - <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1866,8 +1871,8 @@ spi9: spi@a84000 { <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, - <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1888,8 +1893,8 @@ i2c10: i2c@a88000 { <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, - <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1910,8 +1915,8 @@ spi10: spi@a88000 { <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, - <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1932,8 +1937,8 @@ i2c11: i2c@a8c000 { <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, - <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1954,8 +1959,8 @@ spi11: spi@a8c000 { <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, - <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -1976,8 +1981,8 @@ i2c12: i2c@a90000 { <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, - <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -1998,8 +2003,8 @@ spi12: spi@a90000 { <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, - <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -2020,8 +2025,8 @@ i2c13: i2c@a94000 { <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, - <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -2042,8 +2047,8 @@ spi13: spi@a94000 { <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, - <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -2064,8 +2069,8 @@ i2c14: i2c@a98000 { <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, - <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -2086,8 +2091,8 @@ spi14: spi@a98000 { <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, - <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, + <&gpi_dma1 1 6 QCOM_GPI_SPI>; dma-names = "tx", "rx"; @@ -2108,8 +2113,8 @@ i2c15: i2c@a9c000 { <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; interconnect-names = "qup-core", "qup-config", "qup-memory"; - dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, - <&gpi_dma1 1 6 QCOM_GPI_SPI>; + dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, + <&gpi_dma1 1 7 QCOM_GPI_I2C>; dma-names = "tx", "rx"; @@ -3366,6 +3371,10 @@ gpu: gpu@3d00000 { status = "disabled"; + gpu_zap_shader: zap-shader { + memory-region = <&pil_gpu_mem>; + }; + gpu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -3723,6 +3732,12 @@ usb_2_qmpphy1: phy@88f1000 { status = "disabled"; }; + refgen: regulator@8900000 { + compatible = "qcom,sc8280xp-refgen-regulator", + "qcom,sm8250-refgen-regulator"; + reg = <0x0 0x08900000 0x0 0x96>; + }; + usb_1_hsphy: phy@8902000 { compatible = "qcom,sc8280xp-usb-hs-phy", "qcom,usb-snps-hs-5nm-phy"; diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts index d01422844fbfde..ed55646ca419d7 100644 --- a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts +++ b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts @@ -404,11 +404,10 @@ &gpi_dma1 { &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm670/sargo/a615_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm670/sargo/a615_zap.mbn"; }; &i2c9 { diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi index c33f3de779f6ef..b8a8dcbdfbe33e 100644 --- a/arch/arm64/boot/dts/qcom/sdm670.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi @@ -1124,6 +1124,12 @@ i2c15: i2c@a9c000 { }; }; + refgen: regulator@ff1000 { + compatible = "qcom,sdm670-refgen-regulator", + "qcom,sdm845-refgen-regulator"; + reg = <0x0 0x00ff1000 0x0 0x60>; + }; + mem_noc: interconnect@1380000 { compatible = "qcom,sdm670-mem-noc"; reg = <0 0x01380000 0 0x27200>; @@ -1376,6 +1382,10 @@ gpu: gpu@5000000 { status = "disabled"; + gpu_zap_shader: zap-shader { + memory-region = <&gpu_mem>; + }; + gpu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -1926,6 +1936,8 @@ mdss_dsi0: dsi@ae94000 { phys = <&mdss_dsi0_phy>; + refgen-supply = <&refgen>; + #address-cells = <1>; #size-cells = <0>; @@ -2000,6 +2012,8 @@ mdss_dsi1: dsi@ae96000 { phys = <&mdss_dsi1_phy>; + refgen-supply = <&refgen>; + #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 8abf3e909502f3..ce23f87e0316b6 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -455,10 +455,10 @@ &gpi_dma1 { &gpu { status = "okay"; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/a630_zap.mbn"; - }; +}; + +&gpu_zap_shader { + firmware-name = "qcom/sdm845/a630_zap.mbn"; }; &i2c10 { diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi index 99dafc6716e76e..0ee2f4b99fbdb6 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi @@ -99,26 +99,15 @@ memory@9d400000 { no-map; }; - /* rmtfs lower guard */ - memory@f0800000 { - reg = <0 0xf0800000 0 0x1000>; - no-map; - }; - - rmtfs_mem: memory@f0801000 { + rmtfs_mem: rmtfs-region@f0800000 { compatible = "qcom,rmtfs-mem"; - reg = <0 0xf0801000 0 0x200000>; + reg = <0 0xf0800000 0 0x202000>; + qcom,use-guard-pages; no-map; qcom,client-id = <1>; qcom,vmid = ; }; - - /* rmtfs upper guard */ - memory@f0a01000 { - reg = <0 0xf0a01000 0 0x1000>; - no-map; - }; }; gpio-keys { @@ -467,10 +456,6 @@ &gcc { &gpu { status = "okay"; - - zap-shader { - memory-region = <&gpu_mem>; - }; }; &ipa { diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts index a12723310c8b63..09bfcef4240291 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts @@ -47,10 +47,8 @@ &cdsp_pas { firmware-name = "qcom/sdm845/judyln/cdsp.mbn"; }; -&gpu { - zap-shader { - firmware-name = "qcom/sdm845/judyln/a630_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm845/judyln/a630_zap.mbn"; }; &mss_pil { diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts index d17d4d4d56097a..ffe1da2227f00f 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts @@ -33,10 +33,8 @@ &cdsp_pas { firmware-name = "qcom/sdm845/judyp/cdsp.mbn"; }; -&gpu { - zap-shader { - firmware-name = "qcom/sdm845/judyp/a630_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm845/judyp/a630_zap.mbn"; }; &mss_pil { diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 63d2993536ade2..091568642faa78 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -416,11 +416,10 @@ &gcc { &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/a630_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm845/a630_zap.mbn"; }; &i2c10 { diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index dcfffb271fcf31..db6dd04c51bb5f 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -75,32 +75,20 @@ key-vol-up { }; reserved-memory { - /* - * The rmtfs_mem needs to be guarded due to "XPU limitations" - * it is otherwise possible for an allocation adjacent to the - * rmtfs_mem region to trigger an XPU violation, causing a crash. - */ - rmtfs_lower_guard: rmtfs-lower-guard@f5b00000 { - no-map; - reg = <0 0xf5b00000 0 0x1000>; - }; /* * The rmtfs memory region in downstream is 'dynamically allocated' * but given the same address every time. Hard code it as this address is * where the modem firmware expects it to be. */ - rmtfs_mem: rmtfs-mem@f5b01000 { + rmtfs_mem: rmtfs-region@f5b00000 { compatible = "qcom,rmtfs-mem"; - reg = <0 0xf5b01000 0 0x200000>; + reg = <0 0xf5b00000 0 0x202000>; + qcom,use-guard-pages; no-map; qcom,client-id = <1>; qcom,vmid = ; }; - rmtfs_upper_guard: rmtfs-upper-guard@f5d01000 { - no-map; - reg = <0 0xf5d01000 0 0x1000>; - }; /* * It seems like reserving the old rmtfs_mem region is also needed to prevent @@ -162,6 +150,34 @@ ts_1p8_supply: ts-1p8-regulator { enable-active-high; regulator-boot-on; }; + + panel_vci_3v3: panel-vci-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "LCD_VCI_3V"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-0 = <&panel_vci_default>; + pinctrl-names = "default"; + regulator-boot-on; + }; + + panel_vddi_poc_1p8: panel-vddi-poc-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDDI_POC"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-0 = <&panel_poc_default>; + pinctrl-names = "default"; + regulator-boot-on; + }; }; &adsp_pas { @@ -351,11 +367,10 @@ &gcc { &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn"; }; &i2c10 { @@ -429,11 +444,15 @@ display_panel: panel@0 { reg = <0>; vddio-supply = <&vreg_l14a_1p88>; + vci-supply = <&panel_vci_3v3>; + poc-supply = <&panel_vddi_poc_1p8>; + te-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>; + pinctrl-0 = <&panel_default>; + pinctrl-1 = <&panel_sleep>; + pinctrl-names = "default", "sleep"; port { panel_in: endpoint { @@ -803,39 +822,78 @@ hall_sensor_default: hall-sensor-default-state { bias-disable; }; - tri_state_key_default: tri-state-key-default-state { - pins = "gpio40", "gpio42", "gpio26"; + panel_vci_default: vci-state { + pins = "gpio26"; function = "gpio"; - drive-strength = <2>; + drive-strength = <8>; bias-disable; }; - ts_default_pins: ts-int-state { - pins = "gpio99", "gpio125"; - function = "gpio"; - drive-strength = <16>; - bias-pull-up; - }; - - panel_reset_pins: panel-reset-state { - pins = "gpio6", "gpio25", "gpio26"; + panel_poc_default: poc-state { + pins = "gpio25"; function = "gpio"; drive-strength = <8>; bias-disable; }; - panel_te_pin: panel-te-state { - pins = "gpio10"; - function = "mdp_vsync"; + alert_slider_default: alert-slider-default-state { + pins = "gpio126", "gpio52", "gpio24"; + function = "gpio"; drive-strength = <2>; bias-disable; }; - panel_esd_pin: panel-esd-state { - pins = "gpio30"; + panel_default: panel-default-state { + esd-pins { + pins = "gpio30"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + reset-pins { + pins = "gpio6"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + te-pins { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + }; + }; + + panel_sleep: panel-sleep-state { + esd-pins { + pins = "gpio30"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + reset-pins { + pins = "gpio6"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + te-pins { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + }; + }; + + ts_default_pins: ts-int-state { + pins = "gpio99", "gpio125"; function = "gpio"; - drive-strength = <2>; - bias-pull-down; + drive-strength = <16>; + bias-pull-up; }; speaker_default: speaker-default-state { diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts index 7e75decfda052b..d6cd873aef0de2 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts @@ -32,7 +32,7 @@ battery: battery { &display_panel { status = "okay"; - compatible = "samsung,s6e3fc2x01"; + compatible = "samsung,s6e3fc2x01-ams641rw", "samsung,s6e3fc2x01"; }; &i2c4 { diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts index 75a53f0bbebd07..5d41a92cfebffe 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts @@ -158,7 +158,7 @@ rmtfs_mem: rmtfs-mem@fde00000 { }; }; - i2c21 { + i2c-21 { compatible = "i2c-gpio"; sda-gpios = <&tlmm 127 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; scl-gpios = <&tlmm 128 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; @@ -251,11 +251,10 @@ vib_pwm: pwm { &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/starqltechn/a630_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm845/starqltechn/a630_zap.mbn"; }; &mdss { @@ -599,15 +598,15 @@ &uart9 { &i2c14 { status = "okay"; - pmic@66 { + max77705: pmic@66 { compatible = "maxim,max77705"; reg = <0x66>; + #interrupt-cells = <1>; interrupt-parent = <&pm8998_gpios>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; pinctrl-0 = <&pmic_int_default>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; leds { compatible = "maxim,max77705-rgb"; @@ -646,8 +645,8 @@ max77705_charger: charger@69 { reg = <0x69>; compatible = "maxim,max77705-charger"; monitored-battery = <&battery>; - interrupt-parent = <&pm8998_gpios>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&max77705>; + interrupts = <0>; }; fuel-gauge@36 { @@ -655,8 +654,8 @@ fuel-gauge@36 { compatible = "maxim,max77705-battery"; power-supplies = <&max77705_charger>; maxim,rsns-microohm = <5000>; - interrupt-parent = <&pm8998_gpios>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&max77705>; + interrupts = <2>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts index 89260fce651393..ddc2b3ca3bc576 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts @@ -423,31 +423,29 @@ &gcc { &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/axolotl/a630_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm845/axolotl/a630_zap.mbn"; }; &i2c5 { status = "okay"; touchscreen@38 { - compatible = "focaltech,fts8719"; + compatible = "focaltech,ft5452"; reg = <0x38>; - wakeup-source; - interrupt-parent = <&tlmm>; - interrupts = <125 IRQ_TYPE_EDGE_FALLING>; - vdd-supply = <&vreg_l28a_3p0>; - vcc-i2c-supply = <&vreg_l14a_1p88>; - pinctrl-names = "default", "suspend"; + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l28a_3p0>; + iovcc-supply = <&vreg_l14a_1p88>; + pinctrl-0 = <&ts_int_active &ts_reset_active>; pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>; + pinctrl-names = "default", "suspend"; - reset-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>; - irq-gpio = <&tlmm 125 GPIO_TRANSITORY>; touchscreen-size-x = <1080>; touchscreen-size-y = <2160>; }; @@ -479,9 +477,6 @@ panel@0 { vdda-supply = <&vreg_l14a_1p88>; vdd3p3-supply = <&vreg_l28a_3p0>; - #address-cells = <1>; - #size-cells = <0>; - reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default", "sleep"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi index f3f4c0900572a8..7dc9349eedfd92 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi @@ -426,11 +426,10 @@ &gpi_dma1 { &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/Sony/tama/a630_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm845/Sony/tama/a630_zap.mbn"; }; &i2c5 { diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi index 7480c8d7ac5b7f..785006a15e9795 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi @@ -246,11 +246,10 @@ &gpi_dma1 { &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/beryllium/a630_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm845/beryllium/a630_zap.mbn"; }; &ibb { diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts index 1c50a0563bc472..30e88ff010a397 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts @@ -392,11 +392,10 @@ &gpi_dma1 { &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm845/polaris/a630_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sdm845/polaris/a630_zap.mbn"; }; &ibb { diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 13c9515260ef17..bf2f9c04adba79 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -2218,6 +2218,11 @@ uart15: serial@a9c000 { }; }; + refgen: regulator@ff1000 { + compatible = "qcom,sdm845-refgen-regulator"; + reg = <0x0 0x00ff1000 0x0 0x60>; + }; + llcc: system-cache-controller@1100000 { compatible = "qcom,sdm845-llcc"; reg = <0 0x01100000 0 0x45000>, <0 0x01180000 0 0x50000>, @@ -4750,6 +4755,8 @@ mdss_dsi0: dsi@ae94000 { phys = <&mdss_dsi0_phy>; + refgen-supply = <&refgen>; + status = "disabled"; #address-cells = <1>; @@ -4824,6 +4831,8 @@ mdss_dsi1: dsi@ae96000 { phys = <&mdss_dsi1_phy>; + refgen-supply = <&refgen>; + status = "disabled"; #address-cells = <1>; @@ -4893,6 +4902,10 @@ gpu: gpu@5000000 { status = "disabled"; + gpu_zap_shader: zap-shader { + memory-region = <&gpu_mem>; + }; + gpu_opp_table: opp-table { compatible = "operating-points-v2"; diff --git a/arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts b/arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts new file mode 100644 index 00000000000000..0ef9ea38a424a5 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts @@ -0,0 +1,971 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Huawei MateBook E 2019 + * + * Copyright (c) 2025, Jingzhou Zhu + */ + +/dts-v1/; + +#include +#include +#include +#include +#include +#include +#include +#include +#include "sdm850.dtsi" +#include "sdm845-wcd9340.dtsi" +#include "pm8998.dtsi" + +/* + * Update following upstream (sdm845.dtsi) reserved + * memory mappings for firmware loading to succeed + * and enable the IPA device. + */ +/delete-node/ &tz_mem; +/delete-node/ &rmtfs_mem; +/delete-node/ &qseecom_mem; +/delete-node/ &ipa_fw_mem; +/delete-node/ &ipa_gsi_mem; +/delete-node/ &gpu_mem; +/delete-node/ &adsp_mem; +/delete-node/ &wlan_msa_mem; +/delete-node/ &slpi_mem; + +/ { + model = "Huawei MateBook E 2019"; + compatible = "huawei,planck", "qcom,sdm845"; + chassis-type = "convertible"; + + aliases { + serial0 = &uart9; + serial1 = &uart6; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&volume_up_gpio &mode_pin_active>; + pinctrl-names = "default"; + + key-vol-up { + label = "Volume up"; + gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + wakeup-source; + }; + + switch-mode { + label = "Tablet mode switch"; + gpios = <&tlmm 79 GPIO_ACTIVE_HIGH>; + linux,input-type = ; + linux,code = ; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-0 = <&cam_indicator_en>; + pinctrl-names = "default"; + + led: led-camera-indicator { + label = "white:camera-indicator"; + function = LED_FUNCTION_INDICATOR; + color = ; + gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + /* Reuse as a panic indicator until we get a "camera on" trigger */ + panic-indicator; + }; + }; + + sw_edp_1p2: regulator-edp-1p2 { + compatible = "regulator-fixed"; + regulator-name = "sw_edp_1p2"; + + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + pinctrl-0 = <&sw_edp_1p2_en>; + pinctrl-names = "default"; + + gpio = <&pm8998_gpios 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vreg_l2a_1p2>; + }; + + vlcm_3v3: regulator-vlcm-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vlcm_3v3"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vph_pwr>; + }; + + vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + }; + + reserved-memory { + cont_splash_mem: framebuffer@80100000 { + reg = <0 0x80100000 0 0xd00000>; + no-map; + }; + + tz_mem: tz@86d00000 { + reg = <0 0x86d00000 0 0x4600000>; + no-map; + }; + + qseecom_mem: qseecom@8b500000 { + reg = <0 0x8b500000 0 0xa00000>; + no-map; + }; + + wlan_msa_mem: wlan-msa@8c400000 { + reg = <0 0x8c400000 0 0x100000>; + no-map; + }; + + adsp_mem: adsp@8c500000 { + reg = <0 0x8c500000 0 0x1a00000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@8df00000 { + reg = <0 0x8df00000 0 0x100000>; + no-map; + }; + + slpi_mem: slpi@96700000 { + reg = <0 0x96700000 0 0x1200000>; + }; + + gpu_mem: gpu@97900000 { + reg = <0 0x97900000 0 0x5000>; + no-map; + }; + + rmtfs_mem: rmtfs@97c00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0x97c00000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = ; + + }; + }; + + sn65dsi86_refclk: sn65dsi86-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + + clock-frequency = <19200000>; + }; +}; + +&adsp_pas { + firmware-name = "qcom/sdm850/HUAWEI/AL09/qcadsp850.mbn"; + + status = "okay"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s2a_1p125: smps2 { + }; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + regulator-initial-mode = ; + }; + + vreg_s4a_1p8: smps4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = ; + }; + + vreg_s6a_0p8: smps6 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <1028000>; + regulator-max-microvolt = <1028000>; + regulator-initial-mode = ; + }; + + vdd_qusb_hs0: + vdda_hp_pcie_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_dsi0_pll: + vdda_mipi_dsi1_pll: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875: + vdda_pcie_core: + vdda_pll_cc_ebi01: + vdda_pll_cc_ebi23: + vdda_sp_sensor: + vdda_ufs1_core: + vdda_ufs2_core: + vdda_usb1_ss_core: + vdda_usb2_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vddpx_10: + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_l3a_1p0: ldo3 { + }; + + vdd_wcss_cx: + vdd_wcss_mx: + vdda_wcss_pll: + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vddpx_13: + vreg_l6a_1p8: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l8a_1p2: ldo8 { + }; + + vreg_l9a_1p8: ldo9 { + }; + + vreg_l10a_1p8: ldo10 { + }; + + vreg_l11a_1p0: ldo11 { + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc1_cs_1p8: + vdda_gfx_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vddpx_2: + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_l15a_1p8: ldo15 { + }; + + vreg_l16a_2p7: ldo16 { + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l18a_2p7: ldo18 { + }; + + vreg_l19a_3p0: ldo19 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = ; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vreg_l22a_2p85: ldo22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = ; + + regulator-always-on; + }; + + vreg_l23a_3p3: ldo23 { + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + /* 3075000 uV causes -ENOTRECOVERABLE error */ + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = ; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = ; + }; + + vdda_hp_pcie_1p2: + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_mipi_csi_1p25: + vdda_mipi_dsi0_1p2: + vdda_mipi_dsi1_1p2: + vdda_pcie_1p2: + vdda_ufs1_1p2: + vdda_ufs2_1p2: + vdda_usb1_ss_1p2: + vdda_usb2_ss_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l28a_3p0: ldo28 { + /* 3300000 uV causes -ENOTRECOVERABLE error */ + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s2c_0p752: smps2 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + }; + }; +}; + +&cci_i2c0 { + /* chipnext,cn3927e vcm@0xc */ + /* samsung,s5k3l6 camera@0x10 */ + /* eeprom@0x50 */ +}; + +&cci_i2c1 { + /* galaxycore,gc5025 camera@0x36 */ + /* eeprom@0x50 */ +}; + +&cdsp_pas { + firmware-name = "qcom/sdm850/HUAWEI/AL09/qccdsp850.mbn"; + + status = "okay"; +}; + +&crypto { + /* FIXME: qce_start triggers an SError */ + status = "disabled"; +}; + +&gcc { + protected-clocks = , + , + , + , + ; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/sdm850/HUAWEI/AL09/qcdxkmsuc850.mbn"; +}; + +&i2c5 { + clock-frequency = <400000>; + + status = "okay"; + + touchscreen: hid@5d { + compatible = "hid-over-i2c"; + reg = <0x5d>; + hid-descr-addr = <0x1>; + + interrupts-extended = <&tlmm 125 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&i2c5_hid_active>; + pinctrl-names = "default"; + + wakeup-source; + }; +}; + +&i2c7 { + /* ec@0x76 */ +}; + +&i2c10 { + clock-frequency = <400000>; + + status = "okay"; + + sn65dsi86: bridge@2c { + compatible = "ti,sn65dsi86"; + reg = <0x2c>; + + pinctrl-0 = <&sn65dsi86_pin_active>; + pinctrl-names = "default"; + + enable-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + + vcca-supply = <&sw_edp_1p2>; + vcc-supply = <&sw_edp_1p2>; + vpll-supply = <&vreg_l14a_1p88>; + vccio-supply = <&vreg_l14a_1p88>; + + clocks = <&sn65dsi86_refclk>; + clock-names = "refclk"; + + no-hpd; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sn65dsi86_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + sn65dsi86_out: endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + + aux-bus { + panel: panel { + compatible = "innolux,p120zdg-bf1"; + power-supply = <&vlcm_3v3>; + + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; + }; +}; + +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sdm850/HUAWEI/AL09/ipa_fws.elf"; + + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vdda_mipi_dsi0_1p2>; + + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vdda_mipi_dsi0_pll>; + + status = "okay"; +}; + +&mss_pil { + firmware-name = "qcom/sdm850/HUAWEI/AL09/qcdsp1v2850.mbn", + "qcom/sdm850/HUAWEI/AL09/qcdsp2850.mbn"; + + status = "okay"; +}; + +&pm8998_gpios { + sw_edp_1p2_en: sw-edp-1p2-en-state { + pins = "gpio9"; + function = "normal"; + bias-disable; + qcom,drive-strength = ; + }; + + volume_up_gpio: volume-up-gpio-state { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = ; + }; +}; + +&pm8998_pwrkey { + status = "okay"; +}; + +&pm8998_resin { + linux,code = ; + + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&q6asmdai { + dai@0 { + reg = ; + }; + + dai@1 { + reg = ; + }; + + dai@2 { + reg = ; + }; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; + pinctrl-names = "default"; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vddpx_2>; + + bus-width = <4>; + cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>; + + status = "okay"; +}; + +&slpi_pas { + firmware-name = "qcom/sdm850/HUAWEI/AL09/qcslpi850.mbn"; + + status = "okay"; +}; + +&sound { + compatible = "lenovo,yoga-c630-sndcard", "qcom,sdm845-sndcard"; + model = "HUAWEI-PAK_AL09-M1040"; + + audio-routing = "RX_BIAS", "MCLK", + "AMIC2", "MIC BIAS2", + "DMIC0", "MCLK", + "DMIC0", "MIC BIAS1", + "DMIC2", "MCLK", + "DMIC2", "MIC BIAS3", + "SpkrLeft IN", "SPK1 OUT", + "SpkrRight IN", "SPK2 OUT"; + + mm1-dai-link { + link-name = "MultiMedia1"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 AIF1_PB>; + }; + + cpu { + sound-dai = <&q6afedai SLIMBUS_0_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + + codec { + sound-dai = <&wcd9340 AIF1_CAP>; + }; + + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + }; + + slim-wcd-dai-link { + link-name = "SLIM WCD Playback"; + + codec { + sound-dai = <&wcd9340 AIF2_PB>; + }; + + cpu { + sound-dai = <&q6afedai SLIMBUS_1_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, /* Unused */ + <81 4>; /* SPI (fingerprint reader) */ + + cam_indicator_en: cam-indicator-en-state { + pins = "gpio12"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c5_hid_active: i2c5-hid-active-state { + pins = "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + mode_pin_active: mode-pin-state { + pins = "gpio79"; + function = "gpio"; + bias-disable; + }; + + sdc2_default_state: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <16>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + sdc2_card_det_n: sd-card-det-n-state { + pins = "gpio126"; + function = "gpio"; + bias-pull-up; + }; + + sn65dsi86_pin_active: sn65dsi86-enable-state { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; + +&uart6 { + pinctrl-0 = <&qup_uart6_4pin>; + pinctrl-names = "default"; + + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + vddch1-supply = <&vreg_l23a_3p3>; + max-speed = <3200000>; + }; +}; + +&uart9 { + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; + + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = ; + qcom,preemphasis-level = ; + qcom,preemphasis-width = ; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vdda_usb1_ss_1p2>; + vdda-pll-supply = <&vdda_usb1_ss_core>; + + status = "okay"; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + vdd-supply = <&vdda_usb2_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = ; + + status = "okay"; +}; + +&usb_2_qmpphy { + vdda-phy-supply = <&vdda_usb2_ss_1p2>; + vdda-pll-supply = <&vdda_usb2_ss_core>; + + status = "okay"; +}; + +&venus { + firmware-name = "qcom/sdm850/HUAWEI/AL09/qcvss850.mbn"; + + status = "okay"; +}; + +&wcd9340 { + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-io-supply = <&vreg_s4a_1p8>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 + 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <2700000>; + qcom,micbias3-microvolt = <1800000>; + + swm: soundwire@c85 { + left_spkr: speaker@0,3 { + compatible = "sdw10217211000"; + reg = <0 3>; + powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_LOW>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrLeft"; + #sound-dai-cells = <0>; + }; + + right_spkr: speaker@0,4 { + compatible = "sdw10217211000"; + reg = <0 4>; + powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_LOW>; + #thermal-sensor-cells = <0>; + sound-name-prefix = "SpkrRight"; + #sound-dai-cells = <0>; + }; + }; +}; + +&wifi { + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; + + qcom,snoc-host-cap-8bit-quirk; + qcom,calibration-variant = "Huawei_Planck"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index 90efbb7e3799b9..e41200839dbeca 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -356,11 +356,10 @@ &gcc { }; &gpu { - status = "okay"; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sdm850/LENOVO/81JL/qcdxkmsuc850.mbn"; - }; + status = "okay";}; + +&gpu_zap_shader { + firmware-name = "qcom/sdm850/LENOVO/81JL/qcdxkmsuc850.mbn"; }; &i2c1 { diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts index 06cacec3461f13..6696e1aee2436c 100644 --- a/arch/arm64/boot/dts/qcom/sdx75-idp.dts +++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts @@ -337,11 +337,9 @@ &uart1 { }; &usb { - status = "okay"; -}; - -&usb_dwc3 { dr_mode = "peripheral"; + + status = "okay"; }; &usb_hsphy { diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi index 75bfc19f412c8f..eff4c9055d663d 100644 --- a/arch/arm64/boot/dts/qcom/sdx75.dtsi +++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi @@ -1019,12 +1019,9 @@ opp-384000000 { }; }; - usb: usb@a6f8800 { - compatible = "qcom,sdx75-dwc3", "qcom,dwc3"; - reg = <0x0 0x0a6f8800 0x0 0x400>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + usb: usb@a600000 { + compatible = "qcom,sdx75-dwc3", "qcom,snps-dwc3"; + reg = <0x0 0x0a600000 0x0 0xfc100>; clocks = <&gcc GCC_USB30_SLV_AHB_CLK>, <&gcc GCC_USB30_MASTER_CLK>, @@ -1041,21 +1038,35 @@ usb: usb@a6f8800 { <&gcc GCC_USB30_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 9 IRQ_TYPE_EDGE_RISING>, <&pdc 10 IRQ_TYPE_EDGE_RISING>, + <&pdc 9 IRQ_TYPE_EDGE_RISING>, <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "pwr_event", + interrupt-names = "dwc_usb3", + "pwr_event", "hs_phy_irq", - "dm_hs_phy_irq", "dp_hs_phy_irq", + "dm_hs_phy_irq", "ss_phy_irq"; + iommus = <&apps_smmu 0x80 0x0>; + + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + power-domains = <&gcc GCC_USB30_GDSC>; resets = <&gcc GCC_USB30_BCR>; + phys = <&usb_hsphy>, + <&usb_qmpphy>; + phy-names = "usb2-phy", + "usb3-phy"; + interconnects = <&system_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS @@ -1063,38 +1074,25 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, interconnect-names = "usb-ddr", "apps-usb"; + usb-role-switch; + status = "disabled"; - usb_dwc3: usb@a600000 { - compatible = "snps,dwc3"; - reg = <0x0 0x0a600000 0x0 0xcd00>; - interrupts = ; - iommus = <&apps_smmu 0x80 0x0>; - snps,dis_u2_susphy_quirk; - snps,dis_enblslpm_quirk; - snps,dis-u1-entry-quirk; - snps,dis-u2-entry-quirk; - phys = <&usb_hsphy>, - <&usb_qmpphy>; - phy-names = "usb2-phy", - "usb3-phy"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - usb_1_dwc3_hs: endpoint { - }; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { }; + }; - port@1 { - reg = <1>; + port@1 { + reg = <1>; - usb_1_dwc3_ss: endpoint { - }; + usb_1_dwc3_ss: endpoint { }; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts index ad347ccd19755b..466ad409e9240e 100644 --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts @@ -121,10 +121,10 @@ &gpi_dma0 { &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/sm6115/Fxtec/QX1050/a610_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm6115/Fxtec/QX1050/a610_zap.mbn"; }; &i2c1 { diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index 91fc36b59abf96..5e2032c26ea388 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -1745,7 +1745,7 @@ gpu: gpu@5900000 { status = "disabled"; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&pil_gpu_mem>; }; diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts index c17545111f49a8..be1f550fd7b50b 100644 --- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts +++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts @@ -67,10 +67,10 @@ ramoops@ffc00000 { &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/sm6115/LENOVO/J606F/a610_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm6115/LENOVO/J606F/a610_zap.mbn"; }; &mdss { diff --git a/arch/arm64/boot/dts/qcom/sm6150.dtsi b/arch/arm64/boot/dts/qcom/sm6150.dtsi deleted file mode 100644 index 3d2a1cb02b628a..00000000000000 --- a/arch/arm64/boot/dts/qcom/sm6150.dtsi +++ /dev/null @@ -1,4466 +0,0 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/ { - interrupt-parent = <&intc>; - #address-cells = <2>; - #size-cells = <2>; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x0>; - enable-method = "psci"; - power-domains = <&cpu_pd0>; - power-domain-names = "psci"; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; - next-level-cache = <&l2_0>; - clocks = <&cpufreq_hw 0>; - qcom,freq-domain = <&cpufreq_hw 0>; - #cooling-cells = <2>; - - l2_0: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_0>; - }; - }; - - cpu1: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x100>; - enable-method = "psci"; - power-domains = <&cpu_pd1>; - power-domain-names = "psci"; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; - next-level-cache = <&l2_100>; - clocks = <&cpufreq_hw 0>; - qcom,freq-domain = <&cpufreq_hw 0>; - - l2_100: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_0>; - }; - }; - - cpu2: cpu@200 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x200>; - enable-method = "psci"; - power-domains = <&cpu_pd2>; - power-domain-names = "psci"; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; - next-level-cache = <&l2_200>; - clocks = <&cpufreq_hw 0>; - qcom,freq-domain = <&cpufreq_hw 0>; - - l2_200: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_0>; - }; - }; - - cpu3: cpu@300 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x300>; - enable-method = "psci"; - power-domains = <&cpu_pd3>; - power-domain-names = "psci"; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; - next-level-cache = <&l2_300>; - clocks = <&cpufreq_hw 0>; - qcom,freq-domain = <&cpufreq_hw 0>; - - l2_300: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_0>; - }; - }; - - cpu4: cpu@400 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x400>; - enable-method = "psci"; - power-domains = <&cpu_pd4>; - power-domain-names = "psci"; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; - next-level-cache = <&l2_400>; - clocks = <&cpufreq_hw 0>; - qcom,freq-domain = <&cpufreq_hw 0>; - - l2_400: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_0>; - }; - }; - - cpu5: cpu@500 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0 0x500>; - enable-method = "psci"; - power-domains = <&cpu_pd5>; - power-domain-names = "psci"; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; - next-level-cache = <&l2_500>; - clocks = <&cpufreq_hw 0>; - qcom,freq-domain = <&cpufreq_hw 0>; - - l2_500: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_0>; - }; - }; - - cpu6: cpu@600 { - device_type = "cpu"; - compatible = "arm,cortex-a76"; - reg = <0x0 0x600>; - enable-method = "psci"; - power-domains = <&cpu_pd6>; - power-domain-names = "psci"; - capacity-dmips-mhz = <1740>; - dynamic-power-coefficient = <404>; - next-level-cache = <&l2_600>; - clocks = <&cpufreq_hw 1>; - qcom,freq-domain = <&cpufreq_hw 1>; - #cooling-cells = <2>; - - l2_600: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_0>; - }; - }; - - cpu7: cpu@700 { - device_type = "cpu"; - compatible = "arm,cortex-a76"; - reg = <0x0 0x700>; - enable-method = "psci"; - power-domains = <&cpu_pd7>; - power-domain-names = "psci"; - capacity-dmips-mhz = <1740>; - dynamic-power-coefficient = <404>; - next-level-cache = <&l2_700>; - clocks = <&cpufreq_hw 1>; - qcom,freq-domain = <&cpufreq_hw 1>; - - l2_700: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - next-level-cache = <&l3_0>; - }; - }; - - cpu-map { - cluster0 { - core0 { - cpu = <&cpu0>; - }; - - core1 { - cpu = <&cpu1>; - }; - - core2 { - cpu = <&cpu2>; - }; - - core3 { - cpu = <&cpu3>; - }; - - core4 { - cpu = <&cpu4>; - }; - - core5 { - cpu = <&cpu5>; - }; - - core6 { - cpu = <&cpu6>; - }; - - core7 { - cpu = <&cpu7>; - }; - }; - }; - - l3_0: l3-cache { - compatible = "cache"; - cache-level = <3>; - cache-unified; - }; - }; - - dummy_eud: dummy-sink { - compatible = "arm,coresight-dummy-sink"; - - in-ports { - port { - eud_in: endpoint { - remote-endpoint = <&replicator_swao_out1>; - }; - }; - }; - }; - - idle-states { - entry-method = "psci"; - - little_cpu_sleep_0: cpu-sleep-0-0 { - compatible = "arm,idle-state"; - idle-state-name = "silver-power-collapse"; - arm,psci-suspend-param = <0x40000003>; - entry-latency-us = <549>; - exit-latency-us = <901>; - min-residency-us = <1774>; - local-timer-stop; - }; - - little_cpu_sleep_1: cpu-sleep-0-1 { - compatible = "arm,idle-state"; - idle-state-name = "silver-rail-power-collapse"; - arm,psci-suspend-param = <0x40000004>; - entry-latency-us = <702>; - exit-latency-us = <915>; - min-residency-us = <4001>; - local-timer-stop; - }; - - big_cpu_sleep_0: cpu-sleep-1-0 { - compatible = "arm,idle-state"; - idle-state-name = "gold-power-collapse"; - arm,psci-suspend-param = <0x40000003>; - entry-latency-us = <523>; - exit-latency-us = <1244>; - min-residency-us = <2207>; - local-timer-stop; - }; - - big_cpu_sleep_1: cpu-sleep-1-1 { - compatible = "arm,idle-state"; - idle-state-name = "gold-rail-power-collapse"; - arm,psci-suspend-param = <0x40000004>; - entry-latency-us = <526>; - exit-latency-us = <1854>; - min-residency-us = <5555>; - local-timer-stop; - }; - }; - - domain-idle-states { - cluster_sleep_0: cluster-sleep-0 { - compatible = "domain-idle-state"; - arm,psci-suspend-param = <0x41000044>; - entry-latency-us = <2752>; - exit-latency-us = <3048>; - min-residency-us = <6118>; - }; - - cluster_sleep_1: cluster-sleep-1 { - compatible = "domain-idle-state"; - arm,psci-suspend-param = <0x41001344>; - entry-latency-us = <3263>; - exit-latency-us = <4562>; - min-residency-us = <8467>; - }; - - cluster_sleep_2: cluster-sleep-2 { - compatible = "domain-idle-state"; - arm,psci-suspend-param = <0x4100b344>; - entry-latency-us = <3638>; - exit-latency-us = <6562>; - min-residency-us = <9826>; - }; - }; - - memory@80000000 { - device_type = "memory"; - /* We expect the bootloader to fill in the size */ - reg = <0 0x80000000 0 0>; - }; - - firmware { - scm { - compatible = "qcom,scm-qcs615", "qcom,scm"; - qcom,dload-mode = <&tcsr 0x13000>; - }; - }; - - camnoc_virt: interconnect-0 { - compatible = "qcom,qcs615-camnoc-virt"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - ipa_virt: interconnect-1 { - compatible = "qcom,qcs615-ipa-virt"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - mc_virt: interconnect-2 { - compatible = "qcom,qcs615-mc-virt"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - smp2p-adsp { - compatible = "qcom,smp2p"; - qcom,smem = <443>, <429>; - interrupts = ; - /* On this platform, bit 26 (normally SLPI) is repurposed for ADSP */ - mboxes = <&apss_shared 26>; - - qcom,local-pid = <0>; - qcom,remote-pid = <2>; - - adsp_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; - - adsp_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - smp2p-cdsp { - compatible = "qcom,smp2p"; - qcom,smem = <94>, <432>; - interrupts = ; - mboxes = <&apss_shared 6>; - - qcom,local-pid = <0>; - qcom,remote-pid = <5>; - - cdsp_smp2p_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; - - cdsp_smp2p_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - }; - - qup_opp_table: opp-table-qup { - compatible = "operating-points-v2"; - opp-shared; - - opp-75000000 { - opp-hz = /bits/ 64 <75000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-128000000 { - opp-hz = /bits/ 64 <128000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - - cpu_pd0: power-domain-cpu0 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd>; - domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; - }; - - cpu_pd1: power-domain-cpu1 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd>; - domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; - }; - - cpu_pd2: power-domain-cpu2 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd>; - domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; - }; - - cpu_pd3: power-domain-cpu3 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd>; - domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; - }; - - cpu_pd4: power-domain-cpu4 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd>; - domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; - }; - - cpu_pd5: power-domain-cpu5 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd>; - domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; - }; - - cpu_pd6: power-domain-cpu6 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd>; - domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>; - }; - - cpu_pd7: power-domain-cpu7 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd>; - domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>; - }; - - cluster_pd: power-domain-cluster { - #power-domain-cells = <0>; - domain-idle-states = <&cluster_sleep_0 - &cluster_sleep_1 - &cluster_sleep_2>; - }; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - aop_cmd_db_mem: aop-cmd-db@85f20000 { - compatible = "qcom,cmd-db"; - reg = <0x0 0x85f20000 0x0 0x20000>; - no-map; - }; - - smem_region: smem@86000000 { - compatible = "qcom,smem"; - reg = <0x0 0x86000000 0x0 0x200000>; - no-map; - hwlocks = <&tcsr_mutex 3>; - }; - - pil_video_mem: pil-video@93400000 { - reg = <0x0 0x93400000 0x0 0x500000>; - no-map; - }; - - rproc_cdsp_mem: rproc-cdsp@93b00000 { - reg = <0x0 0x93b00000 0x0 0x1e00000>; - no-map; - }; - - rproc_adsp_mem: rproc-adsp@95900000 { - reg = <0x0 0x95900000 0x0 0x1e00000>; - no-map; - }; - }; - - soc: soc@0 { - compatible = "simple-bus"; - ranges = <0 0 0 0 0x10 0>; - dma-ranges = <0 0 0 0 0x10 0>; - #address-cells = <2>; - #size-cells = <2>; - - gcc: clock-controller@100000 { - compatible = "qcom,qcs615-gcc"; - reg = <0 0x00100000 0 0x1f0000>; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&rpmhcc RPMH_CXO_CLK_A>, - <&sleep_clk>; - - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; - - qfprom: efuse@780000 { - compatible = "qcom,qcs615-qfprom", "qcom,qfprom"; - reg = <0x0 0x00780000 0x0 0x7000>; - #address-cells = <1>; - #size-cells = <1>; - - qusb2_hstx_trim: hstx-trim@1f8 { - reg = <0x1fb 0x1>; - bits = <1 4>; - }; - }; - - rng@793000 { - compatible = "qcom,qcs615-trng", "qcom,trng"; - reg = <0x0 0x00793000 0x0 0x1000>; - }; - - sdhc_1: mmc@7c4000 { - compatible = "qcom,qcs615-sdhci", "qcom,sdhci-msm-v5"; - reg = <0x0 0x007c4000 0x0 0x1000>, - <0x0 0x007c5000 0x0 0x1000>, - <0x0 0x007c8000 0x0 0x8000>; - reg-names = "hc", - "cqhci", - "ice"; - - interrupts = , - ; - interrupt-names = "hc_irq", - "pwr_irq"; - - clocks = <&gcc GCC_SDCC1_AHB_CLK>, - <&gcc GCC_SDCC1_APPS_CLK>, - <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_SDCC1_ICE_CORE_CLK>; - clock-names = "iface", - "core", - "xo", - "ice"; - - resets = <&gcc GCC_SDCC1_BCR>; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&sdhc1_opp_table>; - iommus = <&apps_smmu 0x02c0 0x0>; - interconnects = <&aggre1_noc MASTER_SDCC_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_SDCC_1 QCOM_ICC_TAG_ACTIVE_ONLY>; - interconnect-names = "sdhc-ddr", - "cpu-sdhc"; - - qcom,dll-config = <0x000f642c>; - qcom,ddr-config = <0x80040868>; - supports-cqe; - dma-coherent; - - status = "disabled"; - - sdhc1_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - - opp-384000000 { - opp-hz = /bits/ 64 <384000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - }; - - gpi_dma0: dma-controller@800000 { - compatible = "qcom,qcs615-gpi-dma", "qcom,sdm845-gpi-dma"; - reg = <0x0 0x800000 0x0 0x60000>; - #dma-cells = <3>; - interrupts = , - , - , - , - , - , - , - ; - dma-channels = <8>; - dma-channel-mask = <0xf>; - iommus = <&apps_smmu 0xd6 0x0>; - status = "disabled"; - }; - - qupv3_id_0: geniqup@8c0000 { - compatible = "qcom,geni-se-qup"; - reg = <0x0 0x008c0000 0x0 0x6000>; - ranges; - clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, - <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; - clock-names = "m-ahb", - "s-ahb"; - iommus = <&apps_smmu 0xc3 0x0>; - #address-cells = <2>; - #size-cells = <2>; - status = "disabled"; - - uart0: serial@880000 { - compatible = "qcom,geni-debug-uart"; - reg = <0x0 0x00880000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_uart0_tx>, <&qup_uart0_rx>; - pinctrl-names = "default"; - interrupts = ; - interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - status = "disabled"; - }; - - i2c1: i2c@884000 { - compatible = "qcom,geni-i2c"; - reg = <0x0 0x884000 0x0 0x4000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = ; - clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_i2c1_data_clk>; - pinctrl-names = "default"; - interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, - <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, - <&gpi_dma0 1 1 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - i2c2: i2c@888000 { - compatible = "qcom,geni-i2c"; - reg = <0x0 0x888000 0x0 0x4000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = ; - clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_i2c2_data_clk>; - pinctrl-names = "default"; - interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, - <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, - <&gpi_dma0 1 2 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - spi2: spi@888000 { - compatible = "qcom,geni-spi"; - reg = <0x0 0x00888000 0x0 0x4000>; - interrupts = ; - clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; - pinctrl-names = "default"; - interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, - <&gpi_dma0 1 2 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - uart2: serial@888000 { - compatible = "qcom,geni-uart"; - reg = <0x0 0x00888000 0x0 0x4000>; - interrupts = ; - clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_uart2_cts>, <&qup_uart2_rts>, - <&qup_uart2_tx>, <&qup_uart2_rx>; - pinctrl-names = "default"; - interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - status = "disabled"; - }; - - i2c3: i2c@88c000 { - compatible = "qcom,geni-i2c"; - reg = <0x0 0x88c000 0x0 0x4000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = ; - clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_i2c3_data_clk>; - pinctrl-names = "default"; - interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, - <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, - <&gpi_dma0 1 3 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - }; - - gpi_dma1: dma-controller@a00000 { - compatible = "qcom,qcs615-gpi-dma", "qcom,sdm845-gpi-dma"; - reg = <0x0 0xa00000 0x0 0x60000>; - #dma-cells = <3>; - interrupts = , - , - , - , - , - , - , - ; - dma-channels = <8>; - dma-channel-mask = <0xf>; - iommus = <&apps_smmu 0x376 0x0>; - status = "disabled"; - }; - - qupv3_id_1: geniqup@ac0000 { - compatible = "qcom,geni-se-qup"; - reg = <0x0 0xac0000 0x0 0x2000>; - ranges; - clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, - <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; - clock-names = "m-ahb", - "s-ahb"; - iommus = <&apps_smmu 0x363 0x0>; - #address-cells = <2>; - #size-cells = <2>; - status = "disabled"; - - i2c4: i2c@a80000 { - compatible = "qcom,geni-i2c"; - reg = <0x0 0xa80000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_i2c4_data_clk>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, - <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, - <&gpi_dma1 1 0 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - spi4: spi@a80000 { - compatible = "qcom,geni-spi"; - reg = <0x0 0xa80000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, - <&gpi_dma1 1 0 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - uart4: serial@a80000 { - compatible = "qcom,geni-uart"; - reg = <0x0 0xa80000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_uart4_cts>, <&qup_uart4_rts>, - <&qup_uart4_tx>, <&qup_uart4_rx>; - pinctrl-names = "default"; - interrupts = ; - interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - status = "disabled"; - }; - - i2c5: i2c@a84000 { - compatible = "qcom,geni-i2c"; - reg = <0x0 0xa84000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_i2c5_data_clk>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, - <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, - <&gpi_dma1 1 1 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - i2c6: i2c@a88000 { - compatible = "qcom,geni-i2c"; - reg = <0x0 0xa88000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_i2c6_data_clk>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, - <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, - <&gpi_dma1 1 2 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - spi6: spi@a88000 { - compatible = "qcom,geni-spi"; - reg = <0x0 0xa88000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, - <&gpi_dma1 1 2 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - uart6: serial@a88000 { - compatible = "qcom,geni-uart"; - reg = <0x0 0xa88000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_uart6_cts>, <&qup_uart6_rts>, - <&qup_uart6_tx>, <&qup_uart6_rx>; - pinctrl-names = "default"; - interrupts = ; - interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - status = "disabled"; - }; - - i2c7: i2c@a8c000 { - compatible = "qcom,geni-i2c"; - reg = <0x0 0xa8c000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_i2c7_data_clk>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, - <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, - <&gpi_dma1 1 3 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - spi7: spi@a8c000 { - compatible = "qcom,geni-spi"; - reg = <0x0 0xa8c000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>; - pinctrl-names = "default"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, - <&gpi_dma1 1 3 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - status = "disabled"; - }; - - uart7: serial@a8c000 { - compatible = "qcom,geni-uart"; - reg = <0x0 0xa8c000 0x0 0x4000>; - clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; - clock-names = "se"; - pinctrl-0 = <&qup_uart7_cts>, <&qup_uart7_rts>, - <&qup_uart7_tx>, <&qup_uart7_rx>; - pinctrl-names = "default"; - interrupts = ; - interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config"; - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table>; - status = "disabled"; - }; - }; - - config_noc: interconnect@1500000 { - reg = <0x0 0x01500000 0x0 0x5080>; - compatible = "qcom,qcs615-config-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - system_noc: interconnect@1620000 { - reg = <0x0 0x01620000 0x0 0x1f300>; - compatible = "qcom,qcs615-system-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - aggre1_noc: interconnect@1700000 { - reg = <0x0 0x01700000 0x0 0x3f200>; - compatible = "qcom,qcs615-aggre1-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - mmss_noc: interconnect@1740000 { - reg = <0x0 0x01740000 0x0 0x1c100>; - compatible = "qcom,qcs615-mmss-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - pcie: pcie@1c08000 { - device_type = "pci"; - compatible = "qcom,pcie-qcs615", "qcom,pcie-sm8150"; - reg = <0x0 0x01c08000 0x0 0x3000>, - <0x0 0x40000000 0x0 0xf1d>, - <0x0 0x40000f20 0x0 0xa8>, - <0x0 0x40001000 0x0 0x1000>, - <0x0 0x40100000 0x0 0x100000>, - <0x0 0x01c0b000 0x0 0x1000>; - reg-names = "parf", - "dbi", - "elbi", - "atu", - "config", - "mhi"; - #address-cells = <3>; - #size-cells = <2>; - ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, - <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; - bus-range = <0x00 0xff>; - - dma-coherent; - - linux,pci-domain = <0>; - num-lanes = <1>; - - interrupts = , - , - , - , - , - , - , - , - ; - interrupt-names = "msi0", - "msi1", - "msi2", - "msi3", - "msi4", - "msi5", - "msi6", - "msi7", - "global"; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; - - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, - <&gcc GCC_PCIE_0_AUX_CLK>, - <&gcc GCC_PCIE_0_CFG_AHB_CLK>, - <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>; - clock-names = "pipe", - "aux", - "cfg", - "bus_master", - "bus_slave", - "slave_q2a"; - assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>; - assigned-clock-rates = <19200000>; - - interconnects = <&aggre1_noc MASTER_PCIE QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_PCIE_0 QCOM_ICC_TAG_ACTIVE_ONLY>; - interconnect-names = "pcie-mem", "cpu-pcie"; - - iommu-map = <0x0 &apps_smmu 0x400 0x1>, - <0x100 &apps_smmu 0x401 0x1>; - - resets = <&gcc GCC_PCIE_0_BCR>; - reset-names = "pci"; - - power-domains = <&gcc PCIE_0_GDSC>; - - phys = <&pcie_phy>; - phy-names = "pciephy"; - - max-link-speed = <2>; - - operating-points-v2 = <&pcie_opp_table>; - - status = "disabled"; - - pcie_opp_table: opp-table { - compatible = "operating-points-v2"; - - /* GEN 1 x1 */ - opp-2500000 { - opp-hz = /bits/ 64 <2500000>; - required-opps = <&rpmhpd_opp_low_svs>; - opp-peak-kBps = <250000 1>; - }; - - /* GEN 2 x1 */ - opp-5000000 { - opp-hz = /bits/ 64 <5000000>; - required-opps = <&rpmhpd_opp_low_svs>; - opp-peak-kBps = <500000 1>; - }; - }; - - pcie_port0: pcie@0 { - device_type = "pci"; - reg = <0x0 0x0 0x0 0x0 0x0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - bus-range = <0x01 0xff>; - }; - }; - - pcie_phy: phy@1c0e000 { - compatible = "qcom,qcs615-qmp-gen3x1-pcie-phy"; - reg = <0x0 0x01c0e000 0x0 0x1000>; - - clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, - <&gcc GCC_PCIE_0_CFG_AHB_CLK>, - <&gcc GCC_PCIE_0_CLKREF_CLK>, - <&gcc GCC_PCIE0_PHY_REFGEN_CLK>, - <&gcc GCC_PCIE_0_PIPE_CLK>; - clock-names = "aux", - "cfg_ahb", - "ref", - "refgen", - "pipe"; - - resets = <&gcc GCC_PCIE_0_PHY_BCR>; - reset-names = "phy"; - - assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; - assigned-clock-rates = <100000000>; - - #clock-cells = <0>; - clock-output-names = "pcie_0_pipe_clk"; - - #phy-cells = <0>; - - status = "disabled"; - }; - - ufs_mem_hc: ufshc@1d84000 { - compatible = "qcom,qcs615-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; - reg = <0x0 0x01d84000 0x0 0x3000>, - <0x0 0x01d90000 0x0 0x8000>; - reg-names = "std", - "ice"; - - interrupts = ; - - clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, - <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, - <&gcc GCC_UFS_PHY_AHB_CLK>, - <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, - <&gcc GCC_UFS_PHY_ICE_CORE_CLK>, - <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>; - clock-names = "core_clk", - "bus_aggr_clk", - "iface_clk", - "core_clk_unipro", - "ref_clk", - "tx_lane0_sync_clk", - "rx_lane0_sync_clk", - "ice_core_clk"; - - resets = <&gcc GCC_UFS_PHY_BCR>; - reset-names = "rst"; - - operating-points-v2 = <&ufs_opp_table>; - interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; - interconnect-names = "ufs-ddr", - "cpu-ufs"; - - power-domains = <&gcc UFS_PHY_GDSC>; - - iommus = <&apps_smmu 0x300 0x0>; - dma-coherent; - - lanes-per-direction = <1>; - - phys = <&ufs_mem_phy>; - phy-names = "ufsphy"; - - #reset-cells = <1>; - - status = "disabled"; - - ufs_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>, - /bits/ 64 <0>, - /bits/ 64 <0>, - /bits/ 64 <37500000>, - /bits/ 64 <0>, - /bits/ 64 <0>, - /bits/ 64 <0>, - /bits/ 64 <75000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>, - /bits/ 64 <0>, - /bits/ 64 <0>, - /bits/ 64 <75000000>, - /bits/ 64 <0>, - /bits/ 64 <0>, - /bits/ 64 <0>, - /bits/ 64 <150000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-200000000 { - opp-hz = /bits/ 64 <200000000>, - /bits/ 64 <0>, - /bits/ 64 <0>, - /bits/ 64 <150000000>, - /bits/ 64 <0>, - /bits/ 64 <0>, - /bits/ 64 <0>, - /bits/ 64 <300000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - }; - - ufs_mem_phy: phy@1d87000 { - compatible = "qcom,qcs615-qmp-ufs-phy", "qcom,sm6115-qmp-ufs-phy"; - reg = <0x0 0x01d87000 0x0 0xe00>; - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, - <&gcc GCC_UFS_MEM_CLKREF_CLK>; - clock-names = "ref", - "ref_aux", - "qref"; - - power-domains = <&gcc UFS_PHY_GDSC>; - - resets = <&ufs_mem_hc 0>; - reset-names = "ufsphy"; - - #clock-cells = <1>; - #phy-cells = <0>; - - status = "disabled"; - }; - - cryptobam: dma-controller@1dc4000 { - compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; - reg = <0x0 0x01dc4000 0x0 0x24000>; - interrupts = ; - #dma-cells = <1>; - qcom,ee = <0>; - qcom,controlled-remotely; - num-channels = <16>; - qcom,num-ees = <4>; - iommus = <&apps_smmu 0x0104 0x0011>; - }; - - crypto: crypto@1dfa000 { - compatible = "qcom,qcs615-qce", "qcom,sm8150-qce", "qcom,qce"; - reg = <0x0 0x01dfa000 0x0 0x6000>; - dmas = <&cryptobam 4>, <&cryptobam 5>; - dma-names = "rx", "tx"; - iommus = <&apps_smmu 0x0104 0x0011>; - interconnects = <&aggre1_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "memory"; - }; - - tcsr_mutex: hwlock@1f40000 { - compatible = "qcom,tcsr-mutex"; - reg = <0x0 0x01f40000 0x0 0x20000>; - #hwlock-cells = <1>; - }; - - tcsr: syscon@1fc0000 { - compatible = "qcom,qcs615-tcsr", "syscon"; - reg = <0x0 0x01fc0000 0x0 0x30000>; - }; - - tlmm: pinctrl@3100000 { - compatible = "qcom,qcs615-tlmm"; - reg = <0x0 0x03100000 0x0 0x300000>, - <0x0 0x03500000 0x0 0x300000>, - <0x0 0x03d00000 0x0 0x300000>; - reg-names = "east", - "west", - "south"; - interrupts = ; - gpio-ranges = <&tlmm 0 0 124>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - wakeup-parent = <&pdc>; - - qup_i2c1_data_clk: qup-i2c1-data-clk-state { - pins = "gpio4", "gpio5"; - function = "qup0"; - - }; - - qup_i2c2_data_clk: qup-i2c2-data-clk-state { - pins = "gpio0", "gpio1"; - function = "qup0"; - }; - - qup_i2c3_data_clk: qup-i2c3-data-clk-state { - pins = "gpio18", "gpio19"; - function = "qup0"; - }; - - qup_i2c4_data_clk: qup-i2c4-data-clk-state { - pins = "gpio20", "gpio21"; - function = "qup1"; - }; - - qup_i2c5_data_clk: qup-i2c5-data-clk-state { - pins = "gpio14", "gpio15"; - function = "qup1"; - }; - - qup_i2c6_data_clk: qup-i2c6-data-clk-state { - pins = "gpio6", "gpio7"; - function = "qup1"; - }; - - qup_i2c7_data_clk: qup-i2c7-data-clk-state { - pins = "gpio10", "gpio11"; - function = "qup1"; - }; - - qup_spi2_data_clk: qup-spi2-data-clk-state { - pins = "gpio0", "gpio1", "gpio2"; - function = "qup0"; - }; - - qup_spi2_cs: qup-spi2-cs-state { - pins = "gpio3"; - function = "qup0"; - }; - - qup_spi2_cs_gpio: qup-spi2-cs-gpio-state { - pins = "gpio3"; - function = "gpio"; - }; - - qup_spi4_data_clk: qup-spi4-data-clk-state { - pins = "gpio20", "gpio21", "gpio22"; - function = "qup1"; - }; - - qup_spi4_cs: qup-spi4-cs-state { - pins = "gpio23"; - function = "qup1"; - }; - - qup_spi4_cs_gpio: qup-spi4-cs-gpio-state { - pins = "gpio23"; - function = "gpio"; - }; - - qup_spi6_data_clk: qup-spi6-data-clk-state { - pins = "gpio6", "gpio7", "gpio8"; - function = "qup1"; - }; - - qup_spi6_cs: qup-spi6-cs-state { - pins = "gpio9"; - function = "qup1"; - }; - - qup_spi6_cs_gpio: qup-spi6-cs-gpio-state { - pins = "gpio9"; - function = "gpio"; - }; - - qup_spi7_data_clk: qup-spi7-data-clk-state { - pins = "gpio10", "gpio11", "gpio12"; - function = "qup1"; - }; - - qup_spi7_cs: qup-spi7-cs-state { - pins = "gpio13"; - function = "qup1"; - }; - - qup_spi7_cs_gpio: qup-spi7-cs-gpio-state { - pins = "gpio13"; - function = "gpio"; - }; - - qup_uart0_tx: qup-uart0-tx-state { - pins = "gpio16"; - function = "qup0"; - }; - - qup_uart0_rx: qup-uart0-rx-state { - pins = "gpio17"; - function = "qup0"; - }; - - qup_uart2_cts: qup-uart2-cts-state { - pins = "gpio0"; - function = "qup0"; - }; - - qup_uart2_rts: qup-uart2-rts-state { - pins = "gpio1"; - function = "qup0"; - }; - - qup_uart2_tx: qup-uart2-tx-state { - pins = "gpio2"; - function = "qup0"; - }; - - qup_uart2_rx: qup-uart2-rx-state { - pins = "gpio3"; - function = "qup0"; - }; - - qup_uart4_cts: qup-uart4-cts-state { - pins = "gpio20"; - function = "qup1"; - }; - - qup_uart4_rts: qup-uart4-rts-state { - pins = "gpio21"; - function = "qup1"; - }; - - qup_uart4_tx: qup-uart4-tx-state { - pins = "gpio22"; - function = "qup1"; - }; - - qup_uart4_rx: qup-uart4-rx-state { - pins = "gpio23"; - function = "qup1"; - }; - - qup_uart6_cts: qup-uart6-cts-state { - pins = "gpio6"; - function = "qup1"; - }; - - qup_uart6_rts: qup-uart6-rts-state { - pins = "gpio7"; - function = "qup1"; - }; - - qup_uart6_tx: qup-uart6-tx-state { - pins = "gpio8"; - function = "qup1"; - }; - - qup_uart6_rx: qup-uart6-rx-state { - pins = "gpio9"; - function = "qup1"; - }; - - qup_uart7_cts: qup-uart7-cts-state { - pins = "gpio10"; - function = "qup1"; - }; - - qup_uart7_rts: qup-uart7-rts-state { - pins = "gpio11"; - function = "qup1"; - }; - - qup_uart7_tx: qup-uart7-tx-state { - pins = "gpio12"; - function = "qup1"; - }; - - qup_uart7_rx: qup-uart7-rx-state { - pins = "gpio13"; - function = "qup1"; - }; - - sdc1_state_on: sdc1-on-state { - clk-pins { - pins = "sdc1_clk"; - bias-disable; - drive-strength = <16>; - }; - - cmd-pins { - pins = "sdc1_cmd"; - bias-pull-up; - drive-strength = <10>; - }; - - data-pins { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <10>; - }; - - rclk-pins { - pins = "sdc1_rclk"; - bias-pull-down; - }; - }; - - sdc1_state_off: sdc1-off-state { - clk-pins { - pins = "sdc1_clk"; - bias-disable; - drive-strength = <2>; - }; - - cmd-pins { - pins = "sdc1_cmd"; - bias-pull-up; - drive-strength = <2>; - }; - - data-pins { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <2>; - }; - - rclk-pins { - pins = "sdc1_rclk"; - bias-pull-down; - }; - }; - - sdc2_state_on: sdc2-on-state { - clk-pins { - pins = "sdc2_clk"; - bias-disable; - drive-strength = <16>; - }; - - cmd-pins { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <10>; - }; - - data-pins { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <10>; - }; - }; - - sdc2_state_off: sdc2-off-state { - clk-pins { - pins = "sdc2_clk"; - bias-disable; - drive-strength = <2>; - }; - - cmd-pins { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <2>; - }; - - data-pins { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <2>; - }; - }; - }; - - gpucc: clock-controller@5090000 { - compatible = "qcom,qcs615-gpucc"; - reg = <0 0x05090000 0 0x9000>; - - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GPLL0>, - <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; - - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; - - stm@6002000 { - compatible = "arm,coresight-stm", "arm,primecell"; - reg = <0x0 0x06002000 0x0 0x1000>, - <0x0 0x16280000 0x0 0x180000>; - reg-names = "stm-base", - "stm-stimulus-base"; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - out-ports { - port { - stm_out: endpoint { - remote-endpoint = <&funnel_in0_in7>; - }; - }; - }; - }; - - tpda@6004000 { - compatible = "qcom,coresight-tpda", "arm,primecell"; - reg = <0x0 0x06004000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tpda_qdss_in0: endpoint { - remote-endpoint = <&tpdm_center_out>; - }; - }; - - port@4 { - reg = <4>; - - tpda_qdss_in4: endpoint { - remote-endpoint = <&funnel_monaq_out>; - }; - }; - - port@5 { - reg = <5>; - - tpda_qdss_in5: endpoint { - remote-endpoint = <&funnel_ddr_0_out>; - }; - }; - - port@6 { - reg = <6>; - - tpda_qdss_in6: endpoint { - remote-endpoint = <&funnel_turing_out>; - }; - }; - - port@7 { - reg = <7>; - - tpda_qdss_in7: endpoint { - remote-endpoint = <&tpdm_vsense_out>; - }; - }; - - port@8 { - reg = <8>; - - tpda_qdss_in8: endpoint { - remote-endpoint = <&tpdm_dcc_out>; - }; - }; - - port@9 { - reg = <9>; - - tpda_qdss_in9: endpoint { - remote-endpoint = <&tpdm_prng_out>; - }; - }; - - port@b { - reg = <11>; - - tpda_qdss_in11: endpoint { - remote-endpoint = <&tpdm_qm_out>; - }; - }; - - port@c { - reg = <12>; - - tpda_qdss_in12: endpoint { - remote-endpoint = <&tpdm_west_out>; - }; - }; - - port@d { - reg = <13>; - - tpda_qdss_in13: endpoint { - remote-endpoint = <&tpdm_pimem_out>; - }; - }; - }; - - out-ports { - port { - tpda_qdss_out: endpoint { - remote-endpoint = <&funnel_qatb_in>; - }; - }; - }; - }; - - funnel@6005000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x0 0x06005000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - port { - funnel_qatb_in: endpoint { - remote-endpoint = <&tpda_qdss_out>; - }; - }; - }; - - out-ports { - port { - funnel_qatb_out: endpoint { - remote-endpoint = <&funnel_in0_in6>; - }; - }; - }; - }; - - cti@6010000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x06010000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - cti@6011000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x06011000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - cti@6012000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x06012000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - cti@6013000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x06013000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - cti@6014000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x06014000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - cti@6015000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x06015000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - cti@6016000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x06016000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - cti@6017000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x06017000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - cti@6018000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x06018000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - cti@6019000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x06019000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - cti@601a000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x0601a000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - cti@601b000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x0601b000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - cti@601c000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x0601c000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - cti@601d000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x0601d000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - cti@601e000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x0601e000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - cti@601f000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x0601f000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - funnel@6041000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x0 0x06041000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@6 { - reg = <6>; - - funnel_in0_in6: endpoint { - remote-endpoint = <&funnel_qatb_out>; - }; - }; - - port@7 { - reg = <7>; - - funnel_in0_in7: endpoint { - remote-endpoint = <&stm_out>; - }; - }; - }; - - out-ports { - port { - funnel_in0_out: endpoint { - remote-endpoint = <&funnel_merg_in0>; - }; - }; - }; - }; - - funnel@6042000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x0 0x06042000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@3 { - reg = <3>; - - funnel_in1_in3: endpoint { - remote-endpoint = <&replicator_swao_out0>; - }; - }; - - port@4 { - reg = <4>; - - funnel_in1_in4: endpoint { - remote-endpoint = <&tpdm_wcss_out>; - }; - }; - - port@7 { - reg = <7>; - - funnel_in1_in7: endpoint { - remote-endpoint = <&funnel_apss_merg_out>; - }; - }; - }; - - out-ports { - port { - funnel_in1_out: endpoint { - remote-endpoint = <&funnel_merg_in1>; - }; - }; - }; - }; - - funnel@6045000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x0 0x06045000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - funnel_merg_in0: endpoint { - remote-endpoint = <&funnel_in0_out>; - }; - }; - - port@1 { - reg = <1>; - - funnel_merg_in1: endpoint { - remote-endpoint = <&funnel_in1_out>; - }; - }; - }; - - out-ports { - port { - funnel_merg_out: endpoint { - remote-endpoint = <&tmc_etf_in>; - }; - }; - }; - }; - - replicator@6046000 { - compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; - reg = <0x0 0x06046000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - port { - replicator0_in: endpoint { - remote-endpoint = <&tmc_etf_out>; - }; - }; - }; - - out-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - - replicator0_out1: endpoint { - remote-endpoint = <&replicator1_in>; - }; - }; - }; - }; - - tmc@6047000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0x0 0x06047000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - port { - tmc_etf_in: endpoint { - remote-endpoint = <&funnel_merg_out>; - }; - }; - }; - - out-ports { - port { - tmc_etf_out: endpoint { - remote-endpoint = <&replicator0_in>; - }; - }; - }; - }; - - replicator@604a000 { - compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; - reg = <0x0 0x0604a000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - status = "disabled"; - - in-ports { - port { - replicator1_in: endpoint { - remote-endpoint = <&replicator0_out1>; - }; - }; - }; - - out-ports { - port { - replicator1_out: endpoint { - remote-endpoint = <&funnel_swao_in6>; - }; - }; - }; - }; - - cti@683b000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x0683b000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - tpdm@6840000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x06840000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,cmb-element-bits = <64>; - qcom,cmb-msrs-num = <32>; - status = "disabled"; - - out-ports { - port { - tpdm_vsense_out: endpoint { - remote-endpoint = <&tpda_qdss_in7>; - }; - }; - }; - }; - - tpdm@684c000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x0684c000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,cmb-element-bits = <32>; - qcom,cmb-msrs-num = <32>; - - out-ports { - port { - tpdm_prng_out: endpoint { - remote-endpoint = <&tpda_qdss_in9>; - }; - }; - }; - }; - - tpdm@6850000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x06850000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,cmb-element-bits = <64>; - qcom,cmb-msrs-num = <32>; - qcom,dsb-element-bits = <32>; - qcom,dsb-msrs-num = <32>; - - out-ports { - port { - tpdm_pimem_out: endpoint { - remote-endpoint = <&tpda_qdss_in13>; - }; - }; - }; - }; - - tpdm@6860000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x06860000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,dsb-element-bits = <32>; - qcom,dsb-msrs-num = <32>; - - out-ports { - port { - tpdm_turing_out: endpoint { - remote-endpoint = <&funnel_turing_in>; - }; - }; - }; - }; - - funnel@6861000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x0 0x06861000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - port { - funnel_turing_in: endpoint { - remote-endpoint = <&tpdm_turing_out>; - }; - }; - }; - - out-ports { - port { - funnel_turing_out: endpoint { - remote-endpoint = <&tpda_qdss_in6>; - }; - }; - }; - }; - - cti@6867000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x06867000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - tpdm@6870000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x06870000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,cmb-element-bits = <32>; - qcom,cmb-msrs-num = <32>; - status = "disabled"; - - out-ports { - port { - tpdm_dcc_out: endpoint { - remote-endpoint = <&tpda_qdss_in8>; - }; - }; - }; - }; - - tpdm@699c000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x0699c000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,cmb-element-bits = <32>; - qcom,cmb-msrs-num = <32>; - qcom,dsb-element-bits = <32>; - qcom,dsb-msrs-num = <32>; - status = "disabled"; - - out-ports { - port { - tpdm_wcss_out: endpoint { - remote-endpoint = <&funnel_in1_in4>; - }; - }; - }; - }; - - tpdm@69c0000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x069c0000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,dsb-element-bits = <32>; - qcom,dsb-msrs-num = <32>; - - out-ports { - port { - tpdm_monaq_out: endpoint { - remote-endpoint = <&funnel_monaq_in>; - }; - }; - }; - }; - - funnel@69c3000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x0 0x069c3000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - port { - funnel_monaq_in: endpoint { - remote-endpoint = <&tpdm_monaq_out>; - }; - }; - }; - - out-ports { - port { - funnel_monaq_out: endpoint { - remote-endpoint = <&tpda_qdss_in4>; - }; - }; - }; - }; - - tpdm@69d0000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x069d0000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,dsb-element-bits = <32>; - qcom,dsb-msrs-num = <32>; - status = "disabled"; - - out-ports { - port { - tpdm_qm_out: endpoint { - remote-endpoint = <&tpda_qdss_in11>; - }; - }; - }; - }; - - tpdm@6a00000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x06a00000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,dsb-element-bits = <32>; - qcom,dsb-msrs-num = <32>; - status = "disabled"; - - out-ports { - port { - tpdm_ddr_out: endpoint { - remote-endpoint = <&funnel_ddr_0_in>; - }; - }; - }; - }; - - cti@6a02000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x06a02000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - cti@6a03000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x06a03000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - cti@6a10000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x06a10000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - cti@6a11000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x06a11000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - funnel@6a05000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x0 0x06a05000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - port { - funnel_ddr_0_in: endpoint { - remote-endpoint = <&tpdm_ddr_out>; - }; - }; - }; - - out-ports { - port { - funnel_ddr_0_out: endpoint { - remote-endpoint = <&tpda_qdss_in5>; - }; - }; - }; - }; - - tpda@6b01000 { - compatible = "qcom,coresight-tpda", "arm,primecell"; - reg = <0x0 0x06b01000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tpda_swao_in0: endpoint { - remote-endpoint = <&tpdm_swao0_out>; - }; - }; - - port@1 { - reg = <1>; - - tpda_swao_in1: endpoint { - remote-endpoint = <&tpdm_swao1_out>; - }; - - }; - }; - - out-ports { - port { - tpda_swao_out: endpoint { - remote-endpoint = <&funnel_swao_in7>; - }; - }; - }; - }; - - tpdm@6b02000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x06b02000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,cmb-element-bits = <64>; - qcom,cmb-msrs-num = <32>; - status = "disabled"; - - out-ports { - port { - tpdm_swao0_out: endpoint { - remote-endpoint = <&tpda_swao_in0>; - }; - }; - }; - }; - - tpdm@6b03000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x06b03000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,dsb-element-bits = <32>; - qcom,dsb-msrs-num = <32>; - status = "disabled"; - - out-ports { - port { - tpdm_swao1_out: endpoint { - remote-endpoint = <&tpda_swao_in1>; - }; - }; - }; - }; - - cti@6b04000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x06b04000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - cti@6b05000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x06b05000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - cti@6b06000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x06b06000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - cti@6b07000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x06b07000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - funnel@6b08000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x0 0x06b08000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@6 { - reg = <6>; - - funnel_swao_in6: endpoint { - remote-endpoint = <&replicator1_out>; - }; - }; - - port@7 { - reg = <7>; - - funnel_swao_in7: endpoint { - remote-endpoint = <&tpda_swao_out>; - }; - }; - }; - - out-ports { - port { - funnel_swao_out: endpoint { - remote-endpoint = <&tmc_etf_swao_in>; - }; - }; - }; - }; - - tmc@6b09000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0x0 0x06b09000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - port { - tmc_etf_swao_in: endpoint { - remote-endpoint = <&funnel_swao_out>; - }; - }; - }; - - out-ports { - port { - tmc_etf_swao_out: endpoint { - remote-endpoint = <&replicator_swao_in>; - }; - }; - }; - }; - - replicator@6b0a000 { - compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; - reg = <0x0 0x06b0a000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - port { - replicator_swao_in: endpoint { - remote-endpoint = <&tmc_etf_swao_out>; - }; - }; - }; - - out-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - replicator_swao_out0: endpoint { - remote-endpoint = <&funnel_in1_in3>; - }; - }; - - port@1 { - reg = <1>; - - replicator_swao_out1: endpoint { - remote-endpoint = <&eud_in>; - }; - }; - }; - }; - - cti@6b21000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x06b21000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - tpdm@6b48000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x06b48000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,dsb-element-bits = <32>; - qcom,dsb-msrs-num = <32>; - - out-ports { - port { - tpdm_west_out: endpoint { - remote-endpoint = <&tpda_qdss_in12>; - }; - }; - }; - }; - - cti@6c13000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x06c13000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - /* Not all required clocks can be enabled from the OS */ - status = "fail"; - }; - - cti@6c20000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x06c20000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - status = "disabled"; - }; - - tpdm@6c28000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x06c28000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,dsb-element-bits = <32>; - qcom,dsb-msrs-num = <32>; - - out-ports { - port { - tpdm_center_out: endpoint { - remote-endpoint = <&tpda_qdss_in0>; - }; - }; - }; - }; - - cti@6c29000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x06c29000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - cti@6c2a000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x06c2a000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - cti@7020000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x07020000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - etm@7040000 { - compatible = "arm,primecell"; - reg = <0x0 0x07040000 0x0 0x1000>; - cpu = <&cpu0>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; - - out-ports { - port { - etm0_out: endpoint { - remote-endpoint = <&funnel_apss_in0>; - }; - }; - }; - }; - - cti@7120000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x07120000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - etm@7140000 { - compatible = "arm,primecell"; - reg = <0x0 0x07140000 0x0 0x1000>; - cpu = <&cpu1>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; - - out-ports { - port { - etm1_out: endpoint { - remote-endpoint = <&funnel_apss_in1>; - }; - }; - }; - }; - - cti@7220000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x07220000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - etm@7240000 { - compatible = "arm,primecell"; - reg = <0x0 0x07240000 0x0 0x1000>; - cpu = <&cpu2>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; - - out-ports { - port { - etm2_out: endpoint { - remote-endpoint = <&funnel_apss_in2>; - }; - }; - }; - }; - - cti@7320000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x07320000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - etm@7340000 { - compatible = "arm,primecell"; - reg = <0x0 0x07340000 0x0 0x1000>; - cpu = <&cpu3>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; - - out-ports { - port { - etm3_out: endpoint { - remote-endpoint = <&funnel_apss_in3>; - }; - }; - }; - }; - - cti@7420000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x07420000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - etm@7440000 { - compatible = "arm,primecell"; - reg = <0x0 0x07440000 0x0 0x1000>; - cpu = <&cpu4>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; - - out-ports { - port { - etm4_out: endpoint { - remote-endpoint = <&funnel_apss_in4>; - }; - }; - }; - }; - - cti@7520000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x07520000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - etm@7540000 { - compatible = "arm,primecell"; - reg = <0x0 0x07540000 0x0 0x1000>; - cpu = <&cpu5>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; - - out-ports { - port { - etm5_out: endpoint { - remote-endpoint = <&funnel_apss_in5>; - }; - }; - }; - }; - - cti@7620000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x07620000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - etm@7640000 { - compatible = "arm,primecell"; - reg = <0x0 0x07640000 0x0 0x1000>; - cpu = <&cpu6>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; - - out-ports { - port { - etm6_out: endpoint { - remote-endpoint = <&funnel_apss_in6>; - }; - }; - }; - }; - - cti@7720000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x07720000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - etm@7740000 { - compatible = "arm,primecell"; - reg = <0x0 0x07740000 0x0 0x1000>; - cpu = <&cpu7>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - arm,coresight-loses-context-with-cpu; - qcom,skip-power-up; - - out-ports { - port { - etm7_out: endpoint { - remote-endpoint = <&funnel_apss_in7>; - }; - }; - }; - }; - - funnel@7800000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x0 0x07800000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - funnel_apss_in0: endpoint { - remote-endpoint = <&etm0_out>; - }; - }; - - port@1 { - reg = <1>; - - funnel_apss_in1: endpoint { - remote-endpoint = <&etm1_out>; - }; - }; - - port@2 { - reg = <2>; - - funnel_apss_in2: endpoint { - remote-endpoint = <&etm2_out>; - }; - }; - - port@3 { - reg = <3>; - - funnel_apss_in3: endpoint { - remote-endpoint = <&etm3_out>; - }; - }; - - port@4 { - reg = <4>; - - funnel_apss_in4: endpoint { - remote-endpoint = <&etm4_out>; - }; - }; - - port@5 { - reg = <5>; - - funnel_apss_in5: endpoint { - remote-endpoint = <&etm5_out>; - }; - }; - - port@6 { - reg = <6>; - - funnel_apss_in6: endpoint { - remote-endpoint = <&etm6_out>; - }; - }; - - port@7 { - reg = <7>; - - funnel_apss_in7: endpoint { - remote-endpoint = <&etm7_out>; - }; - }; - }; - - out-ports { - port { - funnel_apss_out: endpoint { - remote-endpoint = <&funnel_apss_merg_in0>; - }; - }; - }; - }; - - funnel@7810000 { - compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; - reg = <0x0 0x07810000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - funnel_apss_merg_in0: endpoint { - remote-endpoint = <&funnel_apss_out>; - }; - }; - - port@2 { - reg = <2>; - - funnel_apss_merg_in2: endpoint { - remote-endpoint = <&tpda_olc_out>; - }; - }; - - port@3 { - reg = <3>; - - funnel_apss_merg_in3: endpoint { - remote-endpoint = <&tpda_llm_silver_out>; - }; - }; - - port@4 { - reg = <4>; - - funnel_apss_merg_in4: endpoint { - remote-endpoint = <&tpda_llm_gold_out>; - }; - }; - - port@5 { - reg = <5>; - - funnel_apss_merg_in5: endpoint { - remote-endpoint = <&tpda_apss_out>; - }; - }; - }; - - out-ports { - port { - funnel_apss_merg_out: endpoint { - remote-endpoint = <&funnel_in1_in7>; - }; - }; - }; - }; - - tpdm@7830000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x07830000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,cmb-element-bits = <64>; - qcom,cmb-msrs-num = <32>; - - out-ports { - port { - tpdm_olc_out: endpoint { - remote-endpoint = <&tpda_olc_in>; - }; - }; - }; - }; - - tpda@7832000 { - compatible = "qcom,coresight-tpda", "arm,primecell"; - reg = <0x0 0x07832000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - port { - tpda_olc_in: endpoint { - remote-endpoint = <&tpdm_olc_out>; - }; - }; - }; - - out-ports { - port { - tpda_olc_out: endpoint { - remote-endpoint = <&funnel_apss_merg_in2>; - }; - }; - }; - }; - - tpdm@7860000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x07860000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,dsb-element-bits = <32>; - qcom,dsb-msrs-num = <32>; - - out-ports { - port { - tpdm_apss_out: endpoint { - remote-endpoint = <&tpda_apss_in>; - }; - }; - }; - }; - - tpda@7862000 { - compatible = "qcom,coresight-tpda", "arm,primecell"; - reg = <0x0 0x07862000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - port { - tpda_apss_in: endpoint { - remote-endpoint = <&tpdm_apss_out>; - }; - }; - }; - - out-ports { - port { - tpda_apss_out: endpoint { - remote-endpoint = <&funnel_apss_merg_in5>; - }; - }; - }; - }; - - tpdm@78a0000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x078a0000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,cmb-element-bits = <32>; - qcom,cmb-msrs-num = <32>; - - out-ports { - port { - tpdm_llm_silver_out: endpoint { - remote-endpoint = <&tpda_llm_silver_in>; - }; - }; - }; - }; - - tpdm@78b0000 { - compatible = "qcom,coresight-tpdm", "arm,primecell"; - reg = <0x0 0x078b0000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - qcom,cmb-element-bits = <32>; - qcom,cmb-msrs-num = <32>; - - out-ports { - port { - tpdm_llm_gold_out: endpoint { - remote-endpoint = <&tpda_llm_gold_in>; - }; - }; - }; - }; - - tpda@78c0000 { - compatible = "qcom,coresight-tpda", "arm,primecell"; - reg = <0x0 0x078c0000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - port { - tpda_llm_silver_in: endpoint { - remote-endpoint = <&tpdm_llm_silver_out>; - }; - }; - }; - - out-ports { - port { - tpda_llm_silver_out: endpoint { - remote-endpoint = <&funnel_apss_merg_in3>; - }; - }; - }; - }; - - tpda@78d0000 { - compatible = "qcom,coresight-tpda", "arm,primecell"; - reg = <0x0 0x078d0000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - - in-ports { - port { - tpda_llm_gold_in: endpoint { - remote-endpoint = <&tpdm_llm_gold_out>; - }; - }; - }; - - out-ports { - port { - tpda_llm_gold_out: endpoint { - remote-endpoint = <&funnel_apss_merg_in4>; - }; - }; - }; - }; - - cti@78e0000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x078e0000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - cti@78f0000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x078f0000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - cti@7900000 { - compatible = "arm,coresight-cti", "arm,primecell"; - reg = <0x0 0x07900000 0x0 0x1000>; - - clocks = <&aoss_qmp>; - clock-names = "apb_pclk"; - }; - - remoteproc_cdsp: remoteproc@8300000 { - compatible = "qcom,qcs615-cdsp-pas", "qcom,sm8150-cdsp-pas"; - reg = <0x0 0x08300000 0x0 0x4040>; - - interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", - "fatal", - "ready", - "handover", - "stop-ack"; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; - - power-domains = <&rpmhpd RPMHPD_CX>; - power-domain-names = "cx"; - - memory-region = <&rproc_cdsp_mem>; - - qcom,qmp = <&aoss_qmp>; - - qcom,smem-states = <&cdsp_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts = ; - mboxes = <&apss_shared 4>; - label = "cdsp"; - qcom,remote-pid = <5>; - - fastrpc { - compatible = "qcom,fastrpc"; - qcom,glink-channels = "fastrpcglink-apps-dsp"; - label = "cdsp"; - #address-cells = <1>; - #size-cells = <0>; - - compute-cb@1 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <1>; - iommus = <&apps_smmu 0x1081 0x0>; - dma-coherent; - }; - - compute-cb@2 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <2>; - iommus = <&apps_smmu 0x1082 0x0>; - dma-coherent; - }; - - compute-cb@3 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <3>; - iommus = <&apps_smmu 0x1083 0x0>; - dma-coherent; - }; - - compute-cb@4 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <4>; - iommus = <&apps_smmu 0x1084 0x0>; - dma-coherent; - }; - - compute-cb@5 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <5>; - iommus = <&apps_smmu 0x1085 0x0>; - dma-coherent; - }; - - compute-cb@6 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <6>; - iommus = <&apps_smmu 0x1086 0x0>; - dma-coherent; - }; - }; - }; - }; - - pmu@90b6300 { - compatible = "qcom,qcs615-cpu-bwmon", "qcom,sdm845-bwmon"; - reg = <0x0 0x090b6300 0x0 0x600>; - interrupts = ; - interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>; - - operating-points-v2 = <&cpu_bwmon_opp_table>; - - cpu_bwmon_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-0 { - opp-peak-kBps = <12896000>; - }; - - opp-1 { - opp-peak-kBps = <14928000>; - }; - }; - }; - - pmu@90cd000 { - compatible = "qcom,qcs615-llcc-bwmon", "qcom,sc7280-llcc-bwmon"; - reg = <0x0 0x090cd000 0x0 0x1000>; - interrupts = ; - interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; - - operating-points-v2 = <&llcc_bwmon_opp_table>; - - llcc_bwmon_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-0 { - opp-peak-kBps = <800000>; - }; - - opp-1 { - opp-peak-kBps = <1200000>; - }; - - opp-2 { - opp-peak-kBps = <1804800>; - }; - - opp-3 { - opp-peak-kBps = <2188800>; - }; - - opp-4 { - opp-peak-kBps = <2726400>; - }; - - opp-5 { - opp-peak-kBps = <3072000>; - }; - - opp-6 { - opp-peak-kBps = <4070400>; - }; - - opp-7 { - opp-peak-kBps = <5414400>; - }; - - opp-8 { - opp-peak-kBps = <6220800>; - }; - }; - }; - - sdhc_2: mmc@8804000 { - compatible = "qcom,qcs615-sdhci", "qcom,sdhci-msm-v5"; - reg = <0x0 0x08804000 0x0 0x1000>; - reg-names = "hc"; - - interrupts = , - ; - interrupt-names = "hc_irq", - "pwr_irq"; - - clocks = <&gcc GCC_SDCC2_AHB_CLK>, - <&gcc GCC_SDCC2_APPS_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "iface", - "core", - "xo"; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&sdhc2_opp_table>; - iommus = <&apps_smmu 0x02a0 0x0>; - resets = <&gcc GCC_SDCC2_BCR>; - interconnects = <&aggre1_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ACTIVE_ONLY>; - interconnect-names = "sdhc-ddr", - "cpu-sdhc"; - - qcom,dll-config = <0x0007642c>; - qcom,ddr-config = <0x80040868>; - dma-coherent; - - status = "disabled"; - - sdhc2_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-50000000 { - opp-hz = /bits/ 64 <50000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-202000000 { - opp-hz = /bits/ 64 <202000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - }; - - dc_noc: interconnect@9160000 { - reg = <0x0 0x09160000 0x0 0x3200>; - compatible = "qcom,qcs615-dc-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - llcc: system-cache-controller@9200000 { - compatible = "qcom,qcs615-llcc"; - reg = <0x0 0x09200000 0x0 0x50000>, - <0x0 0x09600000 0x0 0x50000>; - reg-names = "llcc0_base", - "llcc_broadcast_base"; - }; - - gem_noc: interconnect@9680000 { - reg = <0x0 0x09680000 0x0 0x3e200>; - compatible = "qcom,qcs615-gem-noc"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - venus: video-codec@aa00000 { - compatible = "qcom,qcs615-venus", "qcom,sc7180-venus"; - reg = <0x0 0x0aa00000 0x0 0x100000>; - interrupts = ; - - clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, - <&videocc VIDEO_CC_VENUS_AHB_CLK>, - <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>, - <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, - <&videocc VIDEO_CC_VCODEC0_AXI_CLK>; - clock-names = "core", - "iface", - "bus", - "vcodec0_core", - "vcodec0_bus"; - - power-domains = <&videocc VENUS_GDSC>, - <&videocc VCODEC0_GDSC>, - <&rpmhpd RPMHPD_CX>; - power-domain-names = "venus", - "vcodec0", - "cx"; - - operating-points-v2 = <&venus_opp_table>; - - interconnects = <&mmss_noc MASTER_VIDEO_P0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; - interconnect-names = "video-mem", - "cpu-cfg"; - - iommus = <&apps_smmu 0xe60 0x20>; - - memory-region = <&pil_video_mem>; - - status = "disabled"; - - venus_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-133330000 { - opp-hz = /bits/ 64 <133330000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-240000000 { - opp-hz = /bits/ 64 <240000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - - opp-380000000 { - opp-hz = /bits/ 64 <380000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - - opp-410000000 { - opp-hz = /bits/ 64 <410000000>; - required-opps = <&rpmhpd_opp_nom_l1>; - }; - - opp-460000000 { - opp-hz = /bits/ 64 <460000000>; - required-opps = <&rpmhpd_opp_turbo>; - }; - }; - }; - - videocc: clock-controller@ab00000 { - compatible = "qcom,qcs615-videocc"; - reg = <0 0x0ab00000 0 0x10000>; - - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&sleep_clk>; - - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; - - camcc: clock-controller@ad00000 { - compatible = "qcom,qcs615-camcc"; - reg = <0 0x0ad00000 0 0x10000>; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; - - dispcc: clock-controller@af00000 { - compatible = "qcom,qcs615-dispcc"; - reg = <0 0x0af00000 0 0x20000>; - - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, - <0>, - <0>, - <0>, - <0>, - <0>; - - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; - - pdc: interrupt-controller@b220000 { - compatible = "qcom,qcs615-pdc", "qcom,pdc"; - reg = <0x0 0x0b220000 0x0 0x30000>, - <0x0 0x17c000f0 0x0 0x64>; - qcom,pdc-ranges = <0 480 94>, <94 609 31>, <125 63 1>; - interrupt-parent = <&intc>; - #interrupt-cells = <2>; - interrupt-controller; - }; - - aoss_qmp: power-management@c300000 { - compatible = "qcom,qcs615-aoss-qmp", "qcom,aoss-qmp"; - reg = <0x0 0x0c300000 0x0 0x400>; - interrupts = ; - mboxes = <&apss_shared 0>; - - #clock-cells = <0>; - }; - - sram@c3f0000 { - compatible = "qcom,rpmh-stats"; - reg = <0x0 0x0c3f0000 0x0 0x400>; - }; - - sram@14680000 { - compatible = "qcom,qcs615-imem", "syscon", "simple-mfd"; - reg = <0x0 0x14680000 0x0 0x2c000>; - ranges = <0 0 0x14680000 0x2c000>; - - #address-cells = <1>; - #size-cells = <1>; - - pil-reloc@2a94c { - compatible = "qcom,pil-reloc-info"; - reg = <0x2a94c 0xc8>; - }; - }; - - apps_smmu: iommu@15000000 { - compatible = "qcom,qcs615-smmu-500", "qcom,smmu-500", "arm,mmu-500"; - reg = <0x0 0x15000000 0x0 0x80000>; - #iommu-cells = <2>; - #global-interrupts = <1>; - dma-coherent; - - interrupts = , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - , - ; - }; - - spmi_bus: spmi@c440000 { - compatible = "qcom,spmi-pmic-arb"; - reg = <0x0 0x0c440000 0x0 0x1100>, - <0x0 0x0c600000 0x0 0x2000000>, - <0x0 0x0e600000 0x0 0x100000>, - <0x0 0x0e700000 0x0 0xa0000>, - <0x0 0x0c40a000 0x0 0x26000>; - reg-names = "core", - "chnls", - "obsrvr", - "intr", - "cnfg"; - interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "periph_irq"; - interrupt-controller; - #interrupt-cells = <4>; - #address-cells = <2>; - #size-cells = <0>; - qcom,channel = <0>; - qcom,ee = <0>; - }; - - intc: interrupt-controller@17a00000 { - compatible = "arm,gic-v3"; - reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ - <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ - interrupts = ; - #address-cells = <0>; - #interrupt-cells = <3>; - interrupt-controller; - #redistributor-regions = <1>; - redistributor-stride = <0x0 0x20000>; - }; - - apss_shared: mailbox@17c00000 { - compatible = "qcom,qcs615-apss-shared", - "qcom,sdm845-apss-shared"; - reg = <0x0 0x17c00000 0x0 0x1000>; - #mbox-cells = <1>; - }; - - watchdog: watchdog@17c10000 { - compatible = "qcom,apss-wdt-qcs615", "qcom,kpss-wdt"; - reg = <0x0 0x17c10000 0x0 0x1000>; - interrupts = ; - clocks = <&sleep_clk>; - }; - - timer@17c20000 { - compatible = "arm,armv7-timer-mem"; - reg = <0x0 0x17c20000 0x0 0x1000>; - ranges = <0 0 0 0x20000000>; - #address-cells = <1>; - #size-cells = <1>; - - frame@17c21000 { - reg = <0x17c21000 0x1000>, - <0x17c22000 0x1000>; - frame-number = <0>; - interrupts = , - ; - }; - - frame@17c23000 { - reg = <0x17c23000 0x1000>; - frame-number = <1>; - interrupts = ; - status = "disabled"; - }; - - frame@17c25000 { - reg = <0x17c25000 0x1000>; - frame-number = <2>; - interrupts = ; - status = "disabled"; - }; - - frame@17c27000 { - reg = <0x17c27000 0x1000>; - frame-number = <3>; - interrupts = ; - status = "disabled"; - }; - - frame@17c29000 { - reg = <0x17c29000 0x1000>; - frame-number = <4>; - interrupts = ; - status = "disabled"; - }; - - frame@17c2b000 { - reg = <0x17c2b000 0x1000>; - frame-number = <5>; - interrupts = ; - status = "disabled"; - }; - - frame@17c2d000 { - reg = <0x17c2d000 0x1000>; - frame-number = <6>; - interrupts = ; - status = "disabled"; - }; - }; - - apps_rsc: rsc@18200000 { - compatible = "qcom,rpmh-rsc"; - reg = <0x0 0x18200000 0x0 0x10000>, - <0x0 0x18210000 0x0 0x10000>, - <0x0 0x18220000 0x0 0x10000>; - reg-names = "drv-0", - "drv-1", - "drv-2"; - - interrupts = , - , - ; - - qcom,drv-id = <2>; - qcom,tcs-offset = <0xd00>; - qcom,tcs-config = , - , - , - ; - - label = "apps_rsc"; - power-domains = <&cluster_pd>; - - apps_bcm_voter: bcm-voter { - compatible = "qcom,bcm-voter"; - }; - - rpmhcc: clock-controller { - compatible = "qcom,qcs615-rpmh-clk"; - clocks = <&xo_board_clk>; - clock-names = "xo"; - - #clock-cells = <1>; - }; - - rpmhpd: power-controller { - compatible = "qcom,qcs615-rpmhpd"; - #power-domain-cells = <1>; - operating-points-v2 = <&rpmhpd_opp_table>; - - rpmhpd_opp_table: opp-table { - compatible = "operating-points-v2"; - - rpmhpd_opp_ret: opp-0 { - opp-level = ; - }; - - rpmhpd_opp_min_svs: opp-1 { - opp-level = ; - }; - - rpmhpd_opp_low_svs: opp-2 { - opp-level = ; - }; - - rpmhpd_opp_svs: opp-3 { - opp-level = ; - }; - - rpmhpd_opp_svs_l1: opp-4 { - opp-level = ; - }; - - rpmhpd_opp_nom: opp-5 { - opp-level = ; - }; - - rpmhpd_opp_nom_l1: opp-6 { - opp-level = ; - }; - - rpmhpd_opp_nom_l2: opp-7 { - opp-level = ; - }; - - rpmhpd_opp_turbo: opp-8 { - opp-level = ; - }; - - rpmhpd_opp_turbo_l1: opp-9 { - opp-level = ; - }; - }; - }; - }; - - usb_1_hsphy: phy@88e2000 { - compatible = "qcom,qcs615-qusb2-phy"; - reg = <0x0 0x88e2000 0x0 0x180>; - - clocks = <&gcc GCC_AHB2PHY_WEST_CLK>, <&rpmhcc RPMH_CXO_CLK>; - clock-names = "cfg_ahb", "ref"; - - resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; - nvmem-cells = <&qusb2_hstx_trim>; - - #phy-cells = <0>; - - status = "disabled"; - }; - - usb_hsphy_2: phy@88e3000 { - compatible = "qcom,qcs615-qusb2-phy"; - reg = <0x0 0x088e3000 0x0 0x180>; - - clocks = <&gcc GCC_AHB2PHY_WEST_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "cfg_ahb", - "ref"; - - resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; - - #phy-cells = <0>; - - status = "disabled"; - }; - - usb_qmpphy: phy@88e6000 { - compatible = "qcom,qcs615-qmp-usb3-phy"; - reg = <0x0 0x88e6000 0x0 0x1000>; - - clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, - <&gcc GCC_USB3_PRIM_CLKREF_CLK>, - <&gcc GCC_AHB2PHY_WEST_CLK>, - <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "aux", - "ref", - "cfg_ahb", - "pipe"; - - resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>, - <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>; - reset-names = "phy", "phy_phy"; - - qcom,tcsr-reg = <&tcsr 0xb244>; - - clock-output-names = "usb3_phy_pipe_clk_src"; - #clock-cells = <0>; - - #phy-cells = <0>; - - status = "disabled"; - }; - - usb_1: usb@a6f8800 { - compatible = "qcom,qcs615-dwc3", "qcom,dwc3"; - reg = <0x0 0x0a6f8800 0x0 0x400>; - - clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_MASTER_CLK>, - <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB3_PRIM_CLKREF_CLK>; - clock-names = "cfg_noc", - "core", - "iface", - "sleep", - "mock_utmi", - "xo"; - - assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_PRIM_MASTER_CLK>; - assigned-clock-rates = <19200000>, <200000000>; - - interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, - <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 9 IRQ_TYPE_EDGE_BOTH>, - <&pdc 8 IRQ_TYPE_EDGE_BOTH>, - <&pdc 6 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "pwr_event", - "hs_phy_irq", - "dp_hs_phy_irq", - "dm_hs_phy_irq", - "ss_phy_irq"; - - power-domains = <&gcc USB30_PRIM_GDSC>; - required-opps = <&rpmhpd_opp_nom>; - - resets = <&gcc GCC_USB30_PRIM_BCR>; - - #address-cells = <2>; - #size-cells = <2>; - ranges; - - status = "disabled"; - - usb_1_dwc3: usb@a600000 { - compatible = "snps,dwc3"; - reg = <0x0 0x0a600000 0x0 0xcd00>; - - iommus = <&apps_smmu 0x140 0x0>; - interrupts = ; - - phys = <&usb_1_hsphy>, <&usb_qmpphy>; - phy-names = "usb2-phy", "usb3-phy"; - - snps,dis-u1-entry-quirk; - snps,dis-u2-entry-quirk; - snps,dis_u2_susphy_quirk; - snps,dis_u3_susphy_quirk; - snps,dis_enblslpm_quirk; - snps,has-lpm-erratum; - snps,hird-threshold = /bits/ 8 <0x10>; - snps,usb3_lpm_capable; - }; - }; - - usb_2: usb@a8f8800 { - compatible = "qcom,qcs615-dwc3", "qcom,dwc3"; - reg = <0x0 0x0a8f8800 0x0 0x400>; - - clocks = <&gcc GCC_CFG_NOC_USB2_SEC_AXI_CLK>, - <&gcc GCC_USB20_SEC_MASTER_CLK>, - <&gcc GCC_AGGRE_USB2_SEC_AXI_CLK>, - <&gcc GCC_USB20_SEC_SLEEP_CLK>, - <&gcc GCC_USB20_SEC_MOCK_UTMI_CLK>, - <&gcc GCC_USB2_PRIM_CLKREF_CLK>; - clock-names = "cfg_noc", - "core", - "iface", - "sleep", - "mock_utmi", - "xo"; - - assigned-clocks = <&gcc GCC_USB20_SEC_MOCK_UTMI_CLK>, - <&gcc GCC_USB20_SEC_MASTER_CLK>; - assigned-clock-rates = <19200000>, <200000000>; - - interrupts-extended = <&intc GIC_SPI 663 IRQ_TYPE_LEVEL_HIGH>, - <&intc GIC_SPI 662 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 11 IRQ_TYPE_EDGE_BOTH>, - <&pdc 10 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "pwr_event", - "hs_phy_irq", - "dp_hs_phy_irq", - "dm_hs_phy_irq"; - - power-domains = <&gcc USB20_SEC_GDSC>; - required-opps = <&rpmhpd_opp_nom>; - - resets = <&gcc GCC_USB20_SEC_BCR>; - - qcom,select-utmi-as-pipe-clk; - - #address-cells = <2>; - #size-cells = <2>; - ranges; - - status = "disabled"; - - usb_2_dwc3: usb@a800000 { - compatible = "snps,dwc3"; - reg = <0x0 0x0a800000 0x0 0xcd00>; - - iommus = <&apps_smmu 0xe0 0x0>; - interrupts = ; - - phys = <&usb_hsphy_2>; - phy-names = "usb2-phy"; - - snps,dis_u2_susphy_quirk; - snps,dis_u3_susphy_quirk; - snps,dis_enblslpm_quirk; - snps,has-lpm-erratum; - snps,hird-threshold = /bits/ 8 <0x10>; - - maximum-speed = "high-speed"; - }; - }; - - tsens0: thermal-sensor@c263000 { - compatible = "qcom,qcs615-tsens", "qcom,tsens-v2"; - reg = <0x0 0x0c263000 0x0 0x1000>, - <0x0 0x0c222000 0x0 0x1000>; - interrupts = , - ; - interrupt-names = "uplow", "critical"; - #qcom,sensors = <16>; - #thermal-sensor-cells = <1>; - }; - - remoteproc_adsp: remoteproc@62400000 { - compatible = "qcom,qcs615-adsp-pas", "qcom,sm8150-adsp-pas"; - reg = <0x0 0x62400000 0x0 0x4040>; - - interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", - "fatal", - "ready", - "handover", - "stop-ack"; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; - - power-domains = <&rpmhpd RPMHPD_CX>; - power-domain-names = "cx"; - - memory-region = <&rproc_adsp_mem>; - - qcom,qmp = <&aoss_qmp>; - - qcom,smem-states = <&adsp_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink_edge: glink-edge { - interrupts = ; - mboxes = <&apss_shared 24>; - label = "lpass"; - qcom,remote-pid = <2>; - - fastrpc { - compatible = "qcom,fastrpc"; - qcom,glink-channels = "fastrpcglink-apps-dsp"; - label = "adsp"; - #address-cells = <1>; - #size-cells = <0>; - - compute-cb@3 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <3>; - iommus = <&apps_smmu 0x1723 0x0>; - dma-coherent; - }; - - compute-cb@4 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <4>; - iommus = <&apps_smmu 0x1724 0x0>; - dma-coherent; - }; - - compute-cb@5 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <5>; - iommus = <&apps_smmu 0x1725 0x0>; - dma-coherent; - }; - - compute-cb@6 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <6>; - iommus = <&apps_smmu 0x1726 0x0>; - qcom,nsessions = <5>; - dma-coherent; - }; - }; - }; - }; - - cpufreq_hw: cpufreq@18323000 { - compatible = "qcom,qcs615-cpufreq-hw", "qcom,cpufreq-hw"; - reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>; - reg-names = "freq-domain0", "freq-domain1"; - - clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; - clock-names = "xo", "alternate"; - - #freq-domain-cells = <1>; - #clock-cells = <1>; - }; - }; - - arch_timer: timer { - compatible = "arm,armv8-timer"; - interrupts = , - , - , - ; - }; - - thermal-zones { - aoss-thermal { - thermal-sensors = <&tsens0 0>; - - trips { - aoss-critical { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpuss-0-thermal { - thermal-sensors = <&tsens0 1>; - - trips { - cpuss0-critical { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpuss-1-thermal { - thermal-sensors = <&tsens0 2>; - - trips { - cpuss1-critical { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpuss-2-thermal { - thermal-sensors = <&tsens0 3>; - - trips { - cpuss2-critical { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpuss-3-thermal { - thermal-sensors = <&tsens0 4>; - - trips { - cpuss3-critical { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpu-1-0-thermal { - thermal-sensors = <&tsens0 5>; - - trips { - cpu-critical { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpu-1-1-thermal { - thermal-sensors = <&tsens0 6>; - - trips { - cpu-critical { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpu-1-2-thermal { - thermal-sensors = <&tsens0 7>; - - trips { - cpu-critical { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - cpu-1-3-thermal { - thermal-sensors = <&tsens0 8>; - - trips { - cpu-critical { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - gpu-thermal { - thermal-sensors = <&tsens0 9>; - - trips { - gpu-critical { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - q6-hvx-thermal { - thermal-sensors = <&tsens0 10>; - - trips { - q6-hvx-critical { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - mdm-core-thermal { - thermal-sensors = <&tsens0 11>; - - trips { - mdm-core-critical { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - camera-thermal { - thermal-sensors = <&tsens0 12>; - - trips { - camera-critical { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - wlan-thermal { - thermal-sensors = <&tsens0 13>; - - trips { - wlan-critical { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - display-thermal { - thermal-sensors = <&tsens0 14>; - - trips { - display-critical { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - - video-thermal { - thermal-sensors = <&tsens0 15>; - - trips { - video-critical { - temperature = <115000>; - hysteresis = <1000>; - type = "critical"; - }; - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index 8459b27cacc72a..f34dc6e278b8cf 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -1175,18 +1175,47 @@ ufs_mem_hc: ufshc@1d84000 { <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>, <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; - freq-table-hz = - <50000000 200000000>, - <0 0>, - <0 0>, - <37500000 150000000>, - <75000000 300000000>, - <0 0>, - <0 0>, - <0 0>, - <0 0>; + + operating-points-v2 = <&ufs_opp_table>; + + interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "ufs-ddr", + "cpu-ufs"; status = "disabled"; + + ufs_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <37500000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <150000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; }; ufs_mem_phy: phy@1d87000 { @@ -1768,6 +1797,12 @@ usb_1_hsphy: phy@88e3000 { resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; }; + refgen: regulator@88e7000 { + compatible = "qcom,sm6350-refgen-regulator", + "qcom,sm8250-refgen-regulator"; + reg = <0x0 0x088e7000 0x0 0x84>; + }; + usb_1_qmpphy: phy@88e8000 { compatible = "qcom,sm6350-qmp-usb3-dp-phy"; reg = <0x0 0x088e8000 0x0 0x3000>; @@ -2158,6 +2193,8 @@ &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>, power-domains = <&dispcc MDSS_GDSC>; iommus = <&apps_smmu 0x800 0x2>; + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + #address-cells = <2>; #size-cells = <2>; ranges; @@ -2360,6 +2397,8 @@ mdss_dsi0: dsi@ae94000 { phys = <&mdss_dsi0_phy>; phy-names = "dsi"; + refgen-supply = <&refgen>; + #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi index 0faa3a40ff824a..87d6600ccbd94e 100644 --- a/arch/arm64/boot/dts/qcom/sm6375.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi @@ -971,6 +971,12 @@ usb_1_hsphy: phy@162b000 { status = "disabled"; }; + refgen: regulator@162f000 { + compatible = "qcom,sm6375-refgen-regulator", + "qcom,sm8250-refgen-regulator"; + reg = <0x0 0x0162f000 0x0 0x84>; + }; + spmi_bus: spmi@1c40000 { compatible = "qcom,spmi-pmic-arb"; reg = <0 0x01c40000 0 0x1100>, diff --git a/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts b/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts index f16b47b6a74c5f..cb59c122f6f6ad 100644 --- a/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts +++ b/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts @@ -978,6 +978,11 @@ &ipa { status = "okay"; }; +&lpass_audiocc { + compatible = "qcom,qcm6490-lpassaudiocc"; + /delete-property/ power-domains; +}; + &mdss { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm7325.dtsi b/arch/arm64/boot/dts/qcom/sm7325.dtsi index 85d34b53e5e9d1..beb279956df697 100644 --- a/arch/arm64/boot/dts/qcom/sm7325.dtsi +++ b/arch/arm64/boot/dts/qcom/sm7325.dtsi @@ -4,7 +4,7 @@ * Copyright (c) 2024, Danila Tikhonov */ -#include "sc7280.dtsi" +#include "kodiak.dtsi" /* SM7325 uses Kryo 670 */ &cpu0 { compatible = "qcom,kryo670"; }; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index acdba79612aa8f..e3ec99972a28c8 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -2255,7 +2255,7 @@ gpu: gpu@2c00000 { status = "disabled"; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&gpu_mem>; }; @@ -3469,6 +3469,12 @@ usb_2_hsphy: phy@88e3000 { resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; }; + refgen: regulator@88e7000 { + compatible = "qcom,sm8150-refgen-regulator", + "qcom,sdm845-refgen-regulator"; + reg = <0x0 0x088e7000 0x0 0x60>; + }; + usb_1_qmpphy: phy@88e8000 { compatible = "qcom,sm8150-qmp-usb3-dp-phy"; reg = <0 0x088e8000 0 0x3000>; @@ -3992,6 +3998,8 @@ mdss_dsi0: dsi@ae94000 { phys = <&mdss_dsi0_phy>; + refgen-supply = <&refgen>; + status = "disabled"; #address-cells = <1>; @@ -4085,6 +4093,8 @@ mdss_dsi1: dsi@ae96000 { phys = <&mdss_dsi1_phy>; + refgen-supply = <&refgen>; + status = "disabled"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index 7f592bd3024868..51779b99176d06 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -484,11 +484,10 @@ &gmu { &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sm8250/a650_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8250/a650_zap.mbn"; }; &i2c1 { diff --git a/arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi index cf3d917addd828..ef7ea4f72bf999 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi @@ -159,7 +159,8 @@ &pon_resin { }; &tlmm { - gpio-reserved-ranges = <40 4>; /* I2C (Unused) */ + gpio-reserved-ranges = <20 4>, /* SPI (fingerprint scanner) */ + <40 4>; /* Unused */ }; &usb_1 { diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi index 465fd6e954a347..c017399297b9d5 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi @@ -554,11 +554,10 @@ &gpi_dma2 { &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sm8250/xiaomi/elish/a650_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8250/xiaomi/elish/a650_zap.mbn"; }; &i2c0 { diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts index 4ad24974c09f9b..078ba13f8762e0 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts @@ -424,11 +424,10 @@ &gpi_dma2 { &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_mem>; - firmware-name = "qcom/sm8250/xiaomi/pipa/a650_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8250/xiaomi/pipa/a650_zap.mbn"; }; &i2c11 { diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 50dd11432bb2e8..c7dffa44007407 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -2944,7 +2944,7 @@ gpu: gpu@3d00000 { status = "disabled"; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&gpu_mem>; }; @@ -3901,6 +3901,11 @@ usb_2_hsphy: phy@88e4000 { resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; }; + refgen: regulator@88e7000 { + compatible = "qcom,sm8250-refgen-regulator"; + reg = <0x0 0x088e7000 0x0 0x84>; + }; + usb_1_qmpphy: phy@88e8000 { compatible = "qcom,sm8250-qmp-usb3-dp-phy"; reg = <0 0x088e8000 0 0x3000>; @@ -4679,6 +4684,8 @@ mdss: display-subsystem@ae00000 { iommus = <&apps_smmu 0x820 0x402>; + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + status = "disabled"; #address-cells = <2>; @@ -4873,6 +4880,8 @@ mdss_dsi0: dsi@ae94000 { phys = <&mdss_dsi0_phy>; + refgen-supply = <&refgen>; + status = "disabled"; #address-cells = <1>; @@ -4967,6 +4976,8 @@ mdss_dsi1: dsi@ae96000 { phys = <&mdss_dsi1_phy>; + refgen-supply = <&refgen>; + status = "disabled"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts index 24a8c91e9f70f4..5f975d00946585 100644 --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts @@ -403,10 +403,10 @@ &gpi_dma1 { &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/sm8350/a660_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8350/a660_zap.mbn"; }; &i2c13 { diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index fc4ce9d4977e81..5c8fe213f5e4ec 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -2051,7 +2051,7 @@ gpu: gpu@3d00000 { status = "disabled"; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&pil_gpu_mem>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts index 0c6aa7ddf43263..268ae0cd642a74 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -643,10 +643,10 @@ vreg_l7e_2p8: ldo7 { &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/sm8450/a730_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8450/a730_zap.mbn"; }; &i2c9 { diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 23420e6924728c..920a2d1c04d0c5 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -2047,25 +2047,28 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, pcie0_opp_table: opp-table { compatible = "operating-points-v2"; - /* GEN 1 x1 */ + /* 2.5 GT/s x1 */ opp-2500000 { opp-hz = /bits/ 64 <2500000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <250000 1>; + opp-level = <1>; }; - /* GEN 2 x1 */ + /* 5 GT/s x1 */ opp-5000000 { opp-hz = /bits/ 64 <5000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <500000 1>; + opp-level = <2>; }; - /* GEN 3 x1 */ + /* 8 GT/s x1 */ opp-8000000 { opp-hz = /bits/ 64 <8000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <984500 1>; + opp-level = <3>; }; }; @@ -2209,46 +2212,68 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, pcie1_opp_table: opp-table { compatible = "operating-points-v2"; - /* GEN 1 x1 */ - opp-2500000 { + /* 2.5 GT/s x1 */ + opp-2500000-1 { opp-hz = /bits/ 64 <2500000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <250000 1>; + opp-level = <1>; }; - /* GEN 1 x2 and GEN 2 x1 */ - opp-5000000 { + /* 2.5 GT/s x2 */ + opp-5000000-1 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + opp-level = <1>; + }; + + /* 5 GT/s x1 */ + opp-5000000-2 { opp-hz = /bits/ 64 <5000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <500000 1>; + opp-level = <2>; }; - /* GEN 2 x2 */ - opp-10000000 { + /* 5 GT/s x2 */ + opp-10000000-2 { opp-hz = /bits/ 64 <10000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <1000000 1>; + opp-level = <2>; }; - /* GEN 3 x1 */ - opp-8000000 { + /* 8 GT/s x1 */ + opp-8000000-3 { opp-hz = /bits/ 64 <8000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <984500 1>; + opp-level = <3>; + }; + + /* 8 GT/s x2 */ + opp-16000000-3 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <1969000 1>; + opp-level = <3>; }; - /* GEN 3 x2 and GEN 4 x1 */ - opp-16000000 { + /* 16 GT/s x1 */ + opp-16000000-4 { opp-hz = /bits/ 64 <16000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <1969000 1>; + opp-level = <4>; }; - /* GEN 4 x2 */ - opp-32000000 { + /* 16 GT/s x2 */ + opp-32000000-4 { opp-hz = /bits/ 64 <32000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <3938000 1>; + opp-level = <4>; }; }; @@ -2434,7 +2459,7 @@ gpu: gpu@3d00000 { status = "disabled"; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&gpu_micro_code_mem>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8550-hdk-rear-camera-card.dtso b/arch/arm64/boot/dts/qcom/sm8550-hdk-rear-camera-card.dtso new file mode 100644 index 00000000000000..66bec0fef76653 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8550-hdk-rear-camera-card.dtso @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * SM8550-HDK Rear Camera Card overlay + * + * Copyright (c) 2025, Linaro Limited + */ + +#include +#include +#include + +/dts-v1/; +/plugin/; + +&camss { + status = "okay"; + + vdda-phy-supply = <&vreg_l1e_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@3 { + reg = <3>; + + csiphy3_ep: endpoint { + clock-lanes = <4>; + data-lanes = <0 1 2 3>; + remote-endpoint = <&cam_tele>; + }; + }; + }; +}; + +&cci1 { + status = "okay"; +}; + +&cci1_i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + sensor@10 { + compatible = "samsung,s5k3m5"; + reg = <0x10>; + clocks = <&camcc CAM_CC_MCLK3_CLK>; + assigned-clocks = <&camcc CAM_CC_MCLK3_CLK>; + assigned-clock-rates = <24000000>; + reset-gpios = <&tlmm 119 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&cam3_default>; + pinctrl-names = "default"; + afvdd-supply = <&vreg_l7n_2p96>; + avdd-supply = <&vreg_l4m_2p8>; + dovdd-supply = <&vreg_l5n_1p8>; + dvdd-supply = <&vreg_l2m_1p056>; + + port { + cam_tele: endpoint { + link-frequencies = /bits/ 64 <602500000>; + data-lanes = <0 1 2 3>; + remote-endpoint = <&csiphy3_ep>; + }; + }; + }; +}; + +&pm8550_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = ; + led-sources = <1>, <4>; + led-max-microamp = <500000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <0>; + }; + + led-1 { + function = LED_FUNCTION_FLASH; + color = ; + led-sources = <2>, <3>; + led-max-microamp = <500000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <1>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts index b5d7f0cd443a18..599850c48494b1 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts @@ -955,10 +955,10 @@ &gpi_dma1 { &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/sm8550/a740_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8550/a740_zap.mbn"; }; &lpass_tlmm { diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts index 38f2928f23cc3c..f430038bd402c7 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -642,10 +642,10 @@ vreg_l7n_2p96: ldo7 { &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/sm8550/a740_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8550/a740_zap.mbn"; }; &i2c_master_hub_0 { diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts index a3f4200a1145d8..05c98fe2c25be4 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts @@ -716,6 +716,52 @@ vreg_l7n_2p96: ldo7 { }; }; +&camss { + status = "okay"; + + vdda-phy-supply = <&vreg_l1e_0p88>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + ports { + port@3 { + csiphy3_ep: endpoint { + clock-lanes = <4>; + data-lanes = <0 1 2 3>; + remote-endpoint = <&cam_tele>; + }; + }; + }; +}; + +&cci1 { + status = "okay"; +}; + +&cci1_i2c0 { + sensor@10 { + compatible = "samsung,s5k3m5"; + reg = <0x10>; + clocks = <&camcc CAM_CC_MCLK3_CLK>; + assigned-clocks = <&camcc CAM_CC_MCLK3_CLK>; + assigned-clock-rates = <24000000>; + reset-gpios = <&tlmm 119 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&cam3_default>; + pinctrl-names = "default"; + afvdd-supply = <&vreg_l7n_2p96>; + avdd-supply = <&vreg_l4m_2p8>; + dovdd-supply = <&vreg_l5n_1p8>; + dvdd-supply = <&vreg_l2m_1p056>; + + port { + cam_tele: endpoint { + link-frequencies = /bits/ 64 <602500000>; + data-lanes = <0 1 2 3>; + remote-endpoint = <&csiphy3_ep>; + }; + }; + }; +}; + &i2c_master_hub_0 { status = "okay"; }; @@ -789,10 +835,10 @@ &gpi_dma1 { &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/sm8550/a740_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8550/a740_zap.mbn"; }; &lpass_tlmm { diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index 7724dba75db79a..2ca9e50ef59947 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -2027,39 +2027,52 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, pcie0_opp_table: opp-table { compatible = "operating-points-v2"; - /* GEN 1 x1 */ - opp-2500000 { + /* 2.5 GT/s x1 */ + opp-2500000-1 { opp-hz = /bits/ 64 <2500000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <250000 1>; + opp-level = <1>; }; - /* GEN 1 x2 and GEN 2 x1 */ - opp-5000000 { + /* 2.5 GT/s x2 */ + opp-5000000-1 { opp-hz = /bits/ 64 <5000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <500000 1>; + opp-level = <1>; }; - /* GEN 2 x2 */ - opp-10000000 { + /* 5 GT/s x1 */ + opp-5000000-2 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + opp-level = <2>; + }; + + /* 5 GT/s x2 */ + opp-10000000-2 { opp-hz = /bits/ 64 <10000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <1000000 1>; + opp-level = <2>; }; - /* GEN 3 x1 */ - opp-8000000 { + /* 8 GT/s x1 */ + opp-8000000-3 { opp-hz = /bits/ 64 <8000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <984500 1>; + opp-level = <3>; }; - /* GEN 3 x2 */ - opp-16000000 { + /* 8 GT/s x2 */ + opp-16000000-3 { opp-hz = /bits/ 64 <16000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <1969000 1>; + opp-level = <3>; }; }; @@ -2194,46 +2207,68 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, pcie1_opp_table: opp-table { compatible = "operating-points-v2"; - /* GEN 1 x1 */ - opp-2500000 { + /* 2.5 GT/s x1 */ + opp-2500000-1 { opp-hz = /bits/ 64 <2500000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <250000 1>; + opp-level = <1>; + }; + + /* 2.5 GT/s x2 */ + opp-5000000-1 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + opp-level = <1>; }; - /* GEN 1 x2 and GEN 2 x1 */ - opp-5000000 { + /* 5 GT/s x1 */ + opp-5000000-2 { opp-hz = /bits/ 64 <5000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <500000 1>; + opp-level = <2>; }; - /* GEN 2 x2 */ - opp-10000000 { + /* 5 GT/s x2 */ + opp-10000000-2 { opp-hz = /bits/ 64 <10000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <1000000 1>; + opp-level = <2>; }; - /* GEN 3 x1 */ - opp-8000000 { + /* 8 GT/s x1 */ + opp-8000000-3 { opp-hz = /bits/ 64 <8000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <984500 1>; + opp-level = <3>; + }; + + /* 8 GT/s x2 */ + opp-16000000-3 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <1969000 1>; + opp-level = <3>; }; - /* GEN 3 x2 and GEN 4 x1 */ - opp-16000000 { + /* 16 GT/s x1 */ + opp-16000000-4 { opp-hz = /bits/ 64 <16000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <1969000 1>; + opp-level = <4>; }; - /* GEN 4 x2 */ - opp-32000000 { + /* 16 GT/s x2 */ + opp-32000000-4 { opp-hz = /bits/ 64 <32000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <3938000 1>; + opp-level = <4>; }; }; @@ -2456,7 +2491,7 @@ gpu: gpu@3d00000 { status = "disabled"; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&gpu_micro_code_mem>; }; @@ -3189,6 +3224,7 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ACTIVE_ONLY>; interconnect-names = "sdhc-ddr", "cpu-sdhc"; bus-width = <4>; + max-sd-hs-hz = <37500000>; dma-coherent; /* Forbid SDR104/SDR50 - broken hw! */ @@ -4277,6 +4313,150 @@ tlmm: pinctrl@f100000 { gpio-ranges = <&tlmm 0 0 211>; wakeup-parent = <&pdc>; + cam0_default: cam0-default-state { + mclk-pins { + pins = "gpio100"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + }; + + cam0_sleep: cam0-sleep-state { + mclk-pins { + pins = "gpio100"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cam1_default: cam1-default-state { + mclk-pins { + pins = "gpio101"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + }; + + cam1_sleep: cam1-sleep-state { + mclk-pins { + pins = "gpio101"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cam2_default: cam2-default-state { + mclk-pins { + pins = "gpio102"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + }; + + cam2_sleep: cam2-sleep-state { + mclk-pins { + pins = "gpio102"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cam3_default: cam3-default-state { + mclk-pins { + pins = "gpio103"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + }; + + cam3_sleep: cam3-sleep-state { + mclk-pins { + pins = "gpio103"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cam4_default: cam4-default-state { + mclk-pins { + pins = "gpio104"; + function = "cam_aon_mclk4"; + drive-strength = <2>; + bias-disable; + }; + }; + + cam4_sleep: cam4-sleep-state { + mclk-pins { + pins = "gpio104"; + function = "cam_aon_mclk4"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cam5_default: cam5-default-state { + mclk-pins { + pins = "gpio105"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + }; + + cam5_sleep: cam5-sleep-state { + mclk-pins { + pins = "gpio105"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cam6_default: cam6-default-state { + mclk-pins { + pins = "gpio106"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + }; + + cam6_sleep: cam6-sleep-state { + mclk-pins { + pins = "gpio106"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + cam7_default: cam7-default-state { + mclk-pins { + pins = "gpio107"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + }; + + cam7_sleep: cam7-sleep-state { + mclk-pins { + pins = "gpio107"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + }; + cci0_0_default: cci0-0-default-state { sda-pins { pins = "gpio110"; diff --git a/arch/arm64/boot/dts/qcom/sm8650-hdk.dts b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts index 87d7190dc991b1..5bf1af3308ceb6 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts @@ -900,10 +900,10 @@ &iris { &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/sm8650/gen70900_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8650/gen70900_zap.mbn"; }; &lpass_tlmm { diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts index 9e790cf44804d0..b2feac61a89f22 100644 --- a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts @@ -830,10 +830,10 @@ &iris { &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/sm8650/gen70900_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/sm8650/gen70900_zap.mbn"; }; &lpass_tlmm { diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi index ebf1971b1bfbeb..07ae74851621f2 100644 --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi @@ -3659,39 +3659,52 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, pcie0_opp_table: opp-table { compatible = "operating-points-v2"; - /* GEN 1 x1 */ - opp-2500000 { + /* 2.5 GT/s x1 */ + opp-2500000-1 { opp-hz = /bits/ 64 <2500000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <250000 1>; + opp-level = <1>; }; - /* GEN 1 x2 and GEN 2 x1 */ - opp-5000000 { + /* 2.5 GT/s x2 */ + opp-5000000-1 { opp-hz = /bits/ 64 <5000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <500000 1>; + opp-level = <1>; }; - /* GEN 2 x2 */ - opp-10000000 { + /* 5 GT/s x1 */ + opp-5000000-2 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + opp-level = <2>; + }; + + /* 5 GT/s x2 */ + opp-10000000-2 { opp-hz = /bits/ 64 <10000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <1000000 1>; + opp-level = <2>; }; - /* GEN 3 x1 */ - opp-8000000 { + /* 8 GT/s x1 */ + opp-8000000-3 { opp-hz = /bits/ 64 <8000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <984500 1>; + opp-level = <3>; }; - /* GEN 3 x2 */ - opp-16000000 { + /* 8 GT/s x2 */ + opp-16000000-3 { opp-hz = /bits/ 64 <16000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <1969000 1>; + opp-level = <3>; }; }; @@ -3839,46 +3852,68 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, pcie1_opp_table: opp-table { compatible = "operating-points-v2"; - /* GEN 1 x1 */ - opp-2500000 { + /* 2.5 GT/s x1 */ + opp-2500000-1 { opp-hz = /bits/ 64 <2500000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <250000 1>; + opp-level = <1>; }; - /* GEN 1 x2 and GEN 2 x1 */ - opp-5000000 { + /* 2.5 GT/s x2 */ + opp-5000000-1 { opp-hz = /bits/ 64 <5000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <500000 1>; + opp-level = <1>; }; - /* GEN 2 x2 */ - opp-10000000 { + /* 5 GT/s x1 */ + opp-5000000-2 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + opp-level = <2>; + }; + + /* 5 GT/s x2 */ + opp-10000000-2 { opp-hz = /bits/ 64 <10000000>; required-opps = <&rpmhpd_opp_low_svs>; opp-peak-kBps = <1000000 1>; + opp-level = <2>; }; - /* GEN 3 x1 */ - opp-8000000 { + /* 8 GT/s x1 */ + opp-8000000-3 { opp-hz = /bits/ 64 <8000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <984500 1>; + opp-level = <3>; + }; + + /* 8 GT/s x2 */ + opp-16000000-3 { + opp-hz = /bits/ 64 <16000000>; + required-opps = <&rpmhpd_opp_nom>; + opp-peak-kBps = <1969000 1>; + opp-level = <3>; }; - /* GEN 3 x2 and GEN 4 x1 */ - opp-16000000 { + /* 16 GT/s x1 */ + opp-16000000-4 { opp-hz = /bits/ 64 <16000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <1969000 1>; + opp-level = <4>; }; - /* GEN 4 x2 */ - opp-32000000 { + /* 16 GT/s x2 */ + opp-32000000-4 { opp-hz = /bits/ 64 <32000000>; required-opps = <&rpmhpd_opp_nom>; opp-peak-kBps = <3938000 1>; + opp-level = <4>; }; }; @@ -3988,6 +4023,8 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, iommus = <&apps_smmu 0x60 0>; + dma-coherent; + lanes-per-direction = <2>; qcom,ice = <&ice>; @@ -4121,7 +4158,7 @@ gpu: gpu@3d00000 { status = "disabled"; - zap-shader { + gpu_zap_shader: zap-shader { memory-region = <&gpu_micro_code_mem>; }; diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts index 3bbb53b7c71f3c..c8cb521b4c26ce 100644 --- a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts @@ -191,6 +191,51 @@ platform { }; }; + pmic-glink { + compatible = "qcom,sm8750-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_dp_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + }; + }; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; @@ -960,9 +1005,6 @@ &pon_resin { }; &pcie0 { - wake-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>; - perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&pcie0_default_state>; pinctrl-names = "default"; @@ -977,6 +1019,9 @@ &pcie0_phy { }; &pcieport0 { + wake-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>; + wifi@0 { compatible = "pci17cb,1107"; reg = <0x10000 0x0 0x0 0x0 0x0>; @@ -1200,3 +1245,31 @@ &ufs_mem_hc { status = "okay"; }; + +&usb { + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l3g_1p2>; + vdda-pll-supply = <&vreg_l2d_0p88>; + + status = "okay"; +}; + +&usb_dp_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&usb_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_hsphy { + vdd-supply = <&vreg_l2d_0p88>; + vdda12-supply = <&vreg_l3g_1p2>; + + phys = <&pmih0108_eusb2_repeater>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts index 13c7b9664c89cf..b0cb61c5a60345 100644 --- a/arch/arm64/boot/dts/qcom/sm8750-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8750-qrd.dts @@ -193,6 +193,51 @@ platform { }; }; + pmic-glink { + compatible = "qcom,sm8750-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 61 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_dp_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + }; + }; + }; + }; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; @@ -1054,3 +1099,31 @@ &ufs_mem_hc { status = "okay"; }; + +&usb { + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l3g_1p2>; + vdda-pll-supply = <&vreg_l2d_0p88>; + + status = "okay"; +}; + +&usb_dp_qmpphy_out { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&usb_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_hsphy { + vdd-supply = <&vreg_l2d_0p88>; + vdda12-supply = <&vreg_l3g_1p2>; + + phys = <&pmih0108_eusb2_repeater>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi index a82d9867c7cb67..3f0b57f428bbb3 100644 --- a/arch/arm64/boot/dts/qcom/sm8750.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -635,7 +636,7 @@ gcc: clock-controller@100000 { <0>, <0>, <0>, - <0>; + <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; #clock-cells = <1>; #reset-cells = <1>; @@ -2581,6 +2582,164 @@ data-pins { }; }; + usb_hsphy: phy@88e3000 { + compatible = "qcom,sm8750-m31-eusb2-phy"; + reg = <0x0 0x88e3000 0x0 0x29c>; + + clocks = <&tcsrcc TCSR_USB2_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_dp_qmpphy: phy@88e8000 { + compatible = "qcom,sm8750-qmp-usb3-dp-phy"; + reg = <0x0 0x088e8000 0x0 0x4000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&tcsrcc TCSR_USB3_CLKREF_EN>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; + reset-names = "phy", + "common"; + + power-domains = <&gcc GCC_USB3_PHY_GDSC>; + + #clock-cells = <1>; + #phy-cells = <1>; + + orientation-switch; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_dp_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_dp_qmpphy_usb_ss_in: endpoint { + remote-endpoint = <&usb_dwc3_ss>; + }; + }; + + port@2 { + reg = <2>; + + usb_dp_qmpphy_dp_in: endpoint { + }; + }; + }; + }; + + usb: usb@a600000 { + compatible = "qcom,sm8750-dwc3", "qcom,snps-dwc3"; + reg = <0x0 0x0a600000 0x0 0xfc100>; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, + <200000000>; + + interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dwc_usb3", + "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "usb-ddr", "apps-usb"; + + iommus = <&apps_smmu 0x40 0x0>; + + phys = <&usb_hsphy>, + <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", + "usb3-phy"; + + snps,hird-threshold = /bits/ 8 <0x0>; + snps,usb2-gadget-lpm-disable; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,is-utmi-l1-suspend; + snps,usb3_lpm_capable; + snps,usb2-lpm-disable; + snps,has-lpm-erratum; + tx-fifo-resize; + + dma-coherent; + usb-role-switch; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_dwc3_ss: endpoint { + remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; + }; + }; + }; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sm8750-pdc", "qcom,pdc"; reg = <0x0 0x0b220000 0x0 0x10000>, <0x0 0x164400f0 0x0 0x64>; diff --git a/arch/arm64/boot/dts/qcom/talos.dtsi b/arch/arm64/boot/dts/qcom/talos.dtsi new file mode 100644 index 00000000000000..d1dbfa3bd81c3d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/talos.dtsi @@ -0,0 +1,4792 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x0>; + enable-method = "psci"; + power-domains = <&cpu_pd0>; + power-domain-names = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&l2_0>; + clocks = <&cpufreq_hw 0>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + + l2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x100>; + enable-method = "psci"; + power-domains = <&cpu_pd1>; + power-domain-names = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&l2_100>; + clocks = <&cpufreq_hw 0>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + + l2_100: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x200>; + enable-method = "psci"; + power-domains = <&cpu_pd2>; + power-domain-names = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&l2_200>; + clocks = <&cpufreq_hw 0>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + + l2_200: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x300>; + enable-method = "psci"; + power-domains = <&cpu_pd3>; + power-domain-names = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&l2_300>; + clocks = <&cpufreq_hw 0>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + + l2_300: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu4: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x400>; + enable-method = "psci"; + power-domains = <&cpu_pd4>; + power-domain-names = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&l2_400>; + clocks = <&cpufreq_hw 0>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + + l2_400: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu5: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x500>; + enable-method = "psci"; + power-domains = <&cpu_pd5>; + power-domain-names = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&l2_500>; + clocks = <&cpufreq_hw 0>; + qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + + l2_500: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu6: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x0 0x600>; + enable-method = "psci"; + power-domains = <&cpu_pd6>; + power-domain-names = "psci"; + capacity-dmips-mhz = <1740>; + dynamic-power-coefficient = <404>; + next-level-cache = <&l2_600>; + clocks = <&cpufreq_hw 1>; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; + operating-points-v2 = <&cpu6_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + + l2_600: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu7: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x0 0x700>; + enable-method = "psci"; + power-domains = <&cpu_pd7>; + power-domain-names = "psci"; + capacity-dmips-mhz = <1740>; + dynamic-power-coefficient = <404>; + next-level-cache = <&l2_700>; + clocks = <&cpufreq_hw 1>; + qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu6_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; + + l2_700: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&l3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + + core4 { + cpu = <&cpu4>; + }; + + core5 { + cpu = <&cpu5>; + }; + + core6 { + cpu = <&cpu6>; + }; + + core7 { + cpu = <&cpu7>; + }; + }; + }; + + l3_0: l3-cache { + compatible = "cache"; + cache-level = <3>; + cache-unified; + }; + }; + + cpu0_opp_table: opp-table-cpu0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <(300000 * 4) (300000 * 16)>; + }; + + opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + opp-peak-kBps = <(300000 * 4) (576000 * 16)>; + }; + + opp-748800000 { + opp-hz = /bits/ 64 <748800000>; + opp-peak-kBps = <(300000 * 4) (576000 * 16)>; + }; + + opp-998400000 { + opp-hz = /bits/ 64 <998400000>; + opp-peak-kBps = <(451000 * 4) (806400 * 16)>; + }; + + opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + opp-peak-kBps = <(547000 * 4) (1017600 * 16)>; + }; + + opp-1363200000 { + opp-hz = /bits/ 64 <1363200000>; + opp-peak-kBps = <(768000 * 4) (1209600 * 16)>; + }; + + opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <(768000 * 4) (1209600 * 16)>; + }; + + opp-1593600000 { + opp-hz = /bits/ 64 <1593600000>; + opp-peak-kBps = <(1017000 * 4) (1363200 * 16)>; + }; + }; + + cpu6_opp_table: opp-table-cpu6 { + compatible = "operating-points-v2"; + opp-shared; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <(451000 * 4) (300000 * 16)>; + }; + + opp-652800000 { + opp-hz = /bits/ 64 <652800000>; + opp-peak-kBps = <(451000 * 4) (576000 * 16)>; + }; + + opp-768000000 { + opp-hz = /bits/ 64 <768000000>; + opp-peak-kBps = <(451000 * 4) (576000 * 16)>; + }; + + opp-979200000 { + opp-hz = /bits/ 64 <979200000>; + opp-peak-kBps = <(547000 * 4) (806400 * 16)>; + }; + + opp-1017600000 { + opp-hz = /bits/ 64 <1017600000>; + opp-peak-kBps = <(547000 * 4) (806400 * 16)>; + }; + + opp-1094400000 { + opp-hz = /bits/ 64 <109440000>; + opp-peak-kBps = <(1017600 * 4) (940800 * 16)>; + }; + + opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + opp-peak-kBps = <(1017600 * 4) (1017600 * 16)>; + }; + + opp-1363200000 { + opp-hz = /bits/ 64 <1363200000>; + opp-peak-kBps = <(1555000 * 4) (1209600 * 16)>; + }; + + opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <(1555000 * 4) (1209600 * 16)>; + }; + + opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <(1555000 * 4) (1363200 * 16)>; + }; + + opp-1900800000 { + opp-hz = /bits/ 64 <1900800000>; + opp-peak-kBps = <(1555000 * 4) (1363200 * 16)>; + }; + }; + + dummy_eud: dummy-sink { + compatible = "arm,coresight-dummy-sink"; + + in-ports { + port { + eud_in: endpoint { + remote-endpoint = <&replicator_swao_out1>; + }; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + little_cpu_sleep_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "silver-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <549>; + exit-latency-us = <901>; + min-residency-us = <1774>; + local-timer-stop; + }; + + little_cpu_sleep_1: cpu-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "silver-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <702>; + exit-latency-us = <915>; + min-residency-us = <4001>; + local-timer-stop; + }; + + big_cpu_sleep_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <523>; + exit-latency-us = <1244>; + min-residency-us = <2207>; + local-timer-stop; + }; + + big_cpu_sleep_1: cpu-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "gold-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <526>; + exit-latency-us = <1854>; + min-residency-us = <5555>; + local-timer-stop; + }; + }; + + domain-idle-states { + cluster_sleep_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <2752>; + exit-latency-us = <3048>; + min-residency-us = <6118>; + }; + + cluster_sleep_1: cluster-sleep-1 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41001344>; + entry-latency-us = <3263>; + exit-latency-us = <4562>; + min-residency-us = <8467>; + }; + + cluster_sleep_2: cluster-sleep-2 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x4100b344>; + entry-latency-us = <3638>; + exit-latency-us = <6562>; + min-residency-us = <9826>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x80000000 0 0>; + }; + + firmware { + scm { + compatible = "qcom,scm-qcs615", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x13000>; + }; + }; + + camnoc_virt: interconnect-0 { + compatible = "qcom,qcs615-camnoc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + ipa_virt: interconnect-1 { + compatible = "qcom,qcs615-ipa-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-2 { + compatible = "qcom,qcs615-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts = ; + /* On this platform, bit 26 (normally SLPI) is repurposed for ADSP */ + mboxes = <&apss_shared 26>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts = ; + mboxes = <&apss_shared 6>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + cdsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + cdsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + }; + + qup_opp_table: opp-table-qup { + compatible = "operating-points-v2"; + opp-shared; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-128000000 { + opp-hz = /bits/ 64 <128000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + cpu_pd0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; + }; + + cpu_pd1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; + }; + + cpu_pd2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; + }; + + cpu_pd3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; + }; + + cpu_pd4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; + }; + + cpu_pd5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&little_cpu_sleep_0 &little_cpu_sleep_1>; + }; + + cpu_pd6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>; + }; + + cpu_pd7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&cluster_pd>; + domain-idle-states = <&big_cpu_sleep_0 &big_cpu_sleep_1>; + }; + + cluster_pd: power-domain-cluster { + #power-domain-cells = <0>; + domain-idle-states = <&cluster_sleep_0 + &cluster_sleep_1 + &cluster_sleep_2>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + aop_cmd_db_mem: aop-cmd-db@85f20000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x85f20000 0x0 0x20000>; + no-map; + }; + + smem_region: smem@86000000 { + compatible = "qcom,smem"; + reg = <0x0 0x86000000 0x0 0x200000>; + no-map; + hwlocks = <&tcsr_mutex 3>; + }; + + pil_video_mem: pil-video@93400000 { + reg = <0x0 0x93400000 0x0 0x500000>; + no-map; + }; + + rproc_cdsp_mem: rproc-cdsp@93b00000 { + reg = <0x0 0x93b00000 0x0 0x1e00000>; + no-map; + }; + + rproc_adsp_mem: rproc-adsp@95900000 { + reg = <0x0 0x95900000 0x0 0x1e00000>; + no-map; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + #address-cells = <2>; + #size-cells = <2>; + + gcc: clock-controller@100000 { + compatible = "qcom,qcs615-gcc"; + reg = <0 0x00100000 0 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + qfprom: efuse@780000 { + compatible = "qcom,qcs615-qfprom", "qcom,qfprom"; + reg = <0x0 0x00780000 0x0 0x7000>; + #address-cells = <1>; + #size-cells = <1>; + + qusb2_hstx_trim: hstx-trim@1f8 { + reg = <0x1fb 0x1>; + bits = <1 4>; + }; + }; + + rng@793000 { + compatible = "qcom,qcs615-trng", "qcom,trng"; + reg = <0x0 0x00793000 0x0 0x1000>; + }; + + sdhc_1: mmc@7c4000 { + compatible = "qcom,qcs615-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x007c4000 0x0 0x1000>, + <0x0 0x007c5000 0x0 0x1000>, + <0x0 0x007c8000 0x0 0x8000>; + reg-names = "hc", + "cqhci", + "ice"; + + interrupts = , + ; + interrupt-names = "hc_irq", + "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_SDCC1_ICE_CORE_CLK>; + clock-names = "iface", + "core", + "xo", + "ice"; + + resets = <&gcc GCC_SDCC1_BCR>; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&sdhc1_opp_table>; + iommus = <&apps_smmu 0x02c0 0x0>; + interconnects = <&aggre1_noc MASTER_SDCC_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_SDCC_1 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "sdhc-ddr", + "cpu-sdhc"; + + qcom,dll-config = <0x000f642c>; + qcom,ddr-config = <0x80040868>; + supports-cqe; + dma-coherent; + + status = "disabled"; + + sdhc1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + gpi_dma0: dma-controller@800000 { + compatible = "qcom,qcs615-gpi-dma", "qcom,sdm845-gpi-dma"; + reg = <0x0 0x800000 0x0 0x60000>; + #dma-cells = <3>; + interrupts = , + , + , + , + , + , + , + ; + dma-channels = <8>; + dma-channel-mask = <0xf>; + iommus = <&apps_smmu 0xd6 0x0>; + status = "disabled"; + }; + + qupv3_id_0: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x008c0000 0x0 0x6000>; + ranges; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + iommus = <&apps_smmu 0xc3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + status = "disabled"; + + uart0: serial@880000 { + compatible = "qcom,geni-debug-uart"; + reg = <0x0 0x00880000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart0_tx>, <&qup_uart0_rx>; + pinctrl-names = "default"; + interrupts = ; + interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + i2c1: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x884000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c1_data_clk>; + pinctrl-names = "default"; + interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + i2c2: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x888000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c2_data_clk>; + pinctrl-names = "default"; + interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + spi2: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0x00888000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + pinctrl-names = "default"; + interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart2: serial@888000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x00888000 0x0 0x4000>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart2_cts>, <&qup_uart2_rts>, + <&qup_uart2_tx>, <&qup_uart2_rx>; + pinctrl-names = "default"; + interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + i2c3: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0x88c000 0x0 0x4000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c3_data_clk>; + pinctrl-names = "default"; + interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,qcs615-gpi-dma", "qcom,sdm845-gpi-dma"; + reg = <0x0 0xa00000 0x0 0x60000>; + #dma-cells = <3>; + interrupts = , + , + , + , + , + , + , + ; + dma-channels = <8>; + dma-channel-mask = <0xf>; + iommus = <&apps_smmu 0x376 0x0>; + status = "disabled"; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0xac0000 0x0 0x2000>; + ranges; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + iommus = <&apps_smmu 0x363 0x0>; + #address-cells = <2>; + #size-cells = <2>; + status = "disabled"; + + i2c4: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa80000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c4_data_clk>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + spi4: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa80000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + uart4: serial@a80000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0xa80000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart4_cts>, <&qup_uart4_rts>, + <&qup_uart4_tx>, <&qup_uart4_rx>; + pinctrl-names = "default"; + interrupts = ; + interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + i2c5: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa84000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c5_data_clk>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + i2c6: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa88000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c6_data_clk>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + spi6: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa88000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + uart6: serial@a88000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0xa88000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart6_cts>, <&qup_uart6_rts>, + <&qup_uart6_tx>, <&qup_uart6_rx>; + pinctrl-names = "default"; + interrupts = ; + interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + + i2c7: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0x0 0xa8c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_i2c7_data_clk>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + power-domains = <&rpmhpd RPMHPD_CX>; + required-opps = <&rpmhpd_opp_low_svs>; + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + spi7: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0x0 0xa8c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>; + pinctrl-names = "default"; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + status = "disabled"; + }; + + uart7: serial@a8c000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0xa8c000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart7_cts>, <&qup_uart7_rts>, + <&qup_uart7_tx>, <&qup_uart7_rx>; + pinctrl-names = "default"; + interrupts = ; + interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&qup_opp_table>; + status = "disabled"; + }; + }; + + config_noc: interconnect@1500000 { + reg = <0x0 0x01500000 0x0 0x5080>; + compatible = "qcom,qcs615-config-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@1620000 { + reg = <0x0 0x01620000 0x0 0x1f300>; + compatible = "qcom,qcs615-system-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@1700000 { + reg = <0x0 0x01700000 0x0 0x3f200>; + compatible = "qcom,qcs615-aggre1-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mmss_noc: interconnect@1740000 { + reg = <0x0 0x01740000 0x0 0x1c100>; + compatible = "qcom,qcs615-mmss-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pcie: pcie@1c08000 { + device_type = "pci"; + compatible = "qcom,pcie-qcs615", "qcom,pcie-sm8150"; + reg = <0x0 0x01c08000 0x0 0x3000>, + <0x0 0x40000000 0x0 0xf1d>, + <0x0 0x40000f20 0x0 0xa8>, + <0x0 0x40001000 0x0 0x1000>, + <0x0 0x40100000 0x0 0x100000>, + <0x0 0x01c0b000 0x0 0x1000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config", + "mhi"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <0>; + num-lanes = <1>; + + interrupts = , + , + , + , + , + , + , + , + ; + interrupt-names = "msi0", + "msi1", + "msi2", + "msi3", + "msi4", + "msi5", + "msi6", + "msi7", + "global"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a"; + assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnects = <&aggre1_noc MASTER_PCIE QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_PCIE_0 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "pcie-mem", "cpu-pcie"; + + iommu-map = <0x0 &apps_smmu 0x400 0x1>, + <0x100 &apps_smmu 0x401 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + + phys = <&pcie_phy>; + phy-names = "pciephy"; + + max-link-speed = <2>; + + operating-points-v2 = <&pcie_opp_table>; + + status = "disabled"; + + pcie_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* GEN 1 x1 */ + opp-2500000 { + opp-hz = /bits/ 64 <2500000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <250000 1>; + }; + + /* GEN 2 x1 */ + opp-5000000 { + opp-hz = /bits/ 64 <5000000>; + required-opps = <&rpmhpd_opp_low_svs>; + opp-peak-kBps = <500000 1>; + }; + }; + + pcie_port0: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + bus-range = <0x01 0xff>; + }; + }; + + pcie_phy: phy@1c0e000 { + compatible = "qcom,qcs615-qmp-gen3x1-pcie-phy"; + reg = <0x0 0x01c0e000 0x0 0x1000>; + + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>, + <&gcc GCC_PCIE0_PHY_REFGEN_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen", + "pipe"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>; + assigned-clock-rates = <100000000>; + + #clock-cells = <0>; + clock-output-names = "pcie_0_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + ufs_mem_hc: ufshc@1d84000 { + compatible = "qcom,qcs615-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; + reg = <0x0 0x01d84000 0x0 0x3000>, + <0x0 0x01d90000 0x0 0x8000>; + reg-names = "std", + "ice"; + + interrupts = ; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "ice_core_clk"; + + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + operating-points-v2 = <&ufs_opp_table>; + interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "ufs-ddr", + "cpu-ufs"; + + power-domains = <&gcc UFS_PHY_GDSC>; + + iommus = <&apps_smmu 0x300 0x0>; + dma-coherent; + + lanes-per-direction = <1>; + + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + + #reset-cells = <1>; + + status = "disabled"; + + ufs_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <37500000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <75000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <150000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <150000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,qcs615-qmp-ufs-phy", "qcom,sm6115-qmp-ufs-phy"; + reg = <0x0 0x01d87000 0x0 0xe00>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_MEM_CLKREF_CLK>; + clock-names = "ref", + "ref_aux", + "qref"; + + power-domains = <&gcc UFS_PHY_GDSC>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0x0 0x01dc4000 0x0 0x24000>; + interrupts = ; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <16>; + qcom,num-ees = <4>; + iommus = <&apps_smmu 0x0104 0x0011>; + }; + + crypto: crypto@1dfa000 { + compatible = "qcom,qcs615-qce", "qcom,sm8150-qce", "qcom,qce"; + reg = <0x0 0x01dfa000 0x0 0x6000>; + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x0104 0x0011>; + interconnects = <&aggre1_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "memory"; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1fc0000 { + compatible = "qcom,qcs615-tcsr", "syscon"; + reg = <0x0 0x01fc0000 0x0 0x30000>; + }; + + tlmm: pinctrl@3100000 { + compatible = "qcom,qcs615-tlmm"; + reg = <0x0 0x03100000 0x0 0x300000>, + <0x0 0x03500000 0x0 0x300000>, + <0x0 0x03d00000 0x0 0x300000>; + reg-names = "east", + "west", + "south"; + interrupts = ; + gpio-ranges = <&tlmm 0 0 124>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + wakeup-parent = <&pdc>; + + qup_i2c1_data_clk: qup-i2c1-data-clk-state { + pins = "gpio4", "gpio5"; + function = "qup0"; + + }; + + qup_i2c2_data_clk: qup-i2c2-data-clk-state { + pins = "gpio0", "gpio1"; + function = "qup0"; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk-state { + pins = "gpio18", "gpio19"; + function = "qup0"; + }; + + qup_i2c4_data_clk: qup-i2c4-data-clk-state { + pins = "gpio20", "gpio21"; + function = "qup1"; + }; + + qup_i2c5_data_clk: qup-i2c5-data-clk-state { + pins = "gpio14", "gpio15"; + function = "qup1"; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk-state { + pins = "gpio6", "gpio7"; + function = "qup1"; + }; + + qup_i2c7_data_clk: qup-i2c7-data-clk-state { + pins = "gpio10", "gpio11"; + function = "qup1"; + }; + + qup_spi2_data_clk: qup-spi2-data-clk-state { + pins = "gpio0", "gpio1", "gpio2"; + function = "qup0"; + }; + + qup_spi2_cs: qup-spi2-cs-state { + pins = "gpio3"; + function = "qup0"; + }; + + qup_spi2_cs_gpio: qup-spi2-cs-gpio-state { + pins = "gpio3"; + function = "gpio"; + }; + + qup_spi4_data_clk: qup-spi4-data-clk-state { + pins = "gpio20", "gpio21", "gpio22"; + function = "qup1"; + }; + + qup_spi4_cs: qup-spi4-cs-state { + pins = "gpio23"; + function = "qup1"; + }; + + qup_spi4_cs_gpio: qup-spi4-cs-gpio-state { + pins = "gpio23"; + function = "gpio"; + }; + + qup_spi6_data_clk: qup-spi6-data-clk-state { + pins = "gpio6", "gpio7", "gpio8"; + function = "qup1"; + }; + + qup_spi6_cs: qup-spi6-cs-state { + pins = "gpio9"; + function = "qup1"; + }; + + qup_spi6_cs_gpio: qup-spi6-cs-gpio-state { + pins = "gpio9"; + function = "gpio"; + }; + + qup_spi7_data_clk: qup-spi7-data-clk-state { + pins = "gpio10", "gpio11", "gpio12"; + function = "qup1"; + }; + + qup_spi7_cs: qup-spi7-cs-state { + pins = "gpio13"; + function = "qup1"; + }; + + qup_spi7_cs_gpio: qup-spi7-cs-gpio-state { + pins = "gpio13"; + function = "gpio"; + }; + + qup_uart0_tx: qup-uart0-tx-state { + pins = "gpio16"; + function = "qup0"; + }; + + qup_uart0_rx: qup-uart0-rx-state { + pins = "gpio17"; + function = "qup0"; + }; + + qup_uart2_cts: qup-uart2-cts-state { + pins = "gpio0"; + function = "qup0"; + }; + + qup_uart2_rts: qup-uart2-rts-state { + pins = "gpio1"; + function = "qup0"; + }; + + qup_uart2_tx: qup-uart2-tx-state { + pins = "gpio2"; + function = "qup0"; + }; + + qup_uart2_rx: qup-uart2-rx-state { + pins = "gpio3"; + function = "qup0"; + }; + + qup_uart4_cts: qup-uart4-cts-state { + pins = "gpio20"; + function = "qup1"; + }; + + qup_uart4_rts: qup-uart4-rts-state { + pins = "gpio21"; + function = "qup1"; + }; + + qup_uart4_tx: qup-uart4-tx-state { + pins = "gpio22"; + function = "qup1"; + }; + + qup_uart4_rx: qup-uart4-rx-state { + pins = "gpio23"; + function = "qup1"; + }; + + qup_uart6_cts: qup-uart6-cts-state { + pins = "gpio6"; + function = "qup1"; + }; + + qup_uart6_rts: qup-uart6-rts-state { + pins = "gpio7"; + function = "qup1"; + }; + + qup_uart6_tx: qup-uart6-tx-state { + pins = "gpio8"; + function = "qup1"; + }; + + qup_uart6_rx: qup-uart6-rx-state { + pins = "gpio9"; + function = "qup1"; + }; + + qup_uart7_cts: qup-uart7-cts-state { + pins = "gpio10"; + function = "qup1"; + }; + + qup_uart7_rts: qup-uart7-rts-state { + pins = "gpio11"; + function = "qup1"; + }; + + qup_uart7_tx: qup-uart7-tx-state { + pins = "gpio12"; + function = "qup1"; + }; + + qup_uart7_rx: qup-uart7-rx-state { + pins = "gpio13"; + function = "qup1"; + }; + + sdc1_state_on: sdc1-on-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc1_state_off: sdc1-off-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + rclk-pins { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + sdc2_state_on: sdc2-on-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_state_off: sdc2-off-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + }; + + gpucc: clock-controller@5090000 { + compatible = "qcom,qcs615-gpucc"; + reg = <0 0x05090000 0 0x9000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GPLL0>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + stm@6002000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0x0 0x06002000 0x0 0x1000>, + <0x0 0x16280000 0x0 0x180000>; + reg-names = "stm-base", + "stm-stimulus-base"; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + out-ports { + port { + stm_out: endpoint { + remote-endpoint = <&funnel_in0_in7>; + }; + }; + }; + }; + + tpda@6004000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x06004000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tpda_qdss_in0: endpoint { + remote-endpoint = <&tpdm_center_out>; + }; + }; + + port@4 { + reg = <4>; + + tpda_qdss_in4: endpoint { + remote-endpoint = <&funnel_monaq_out>; + }; + }; + + port@5 { + reg = <5>; + + tpda_qdss_in5: endpoint { + remote-endpoint = <&funnel_ddr_0_out>; + }; + }; + + port@6 { + reg = <6>; + + tpda_qdss_in6: endpoint { + remote-endpoint = <&funnel_turing_out>; + }; + }; + + port@7 { + reg = <7>; + + tpda_qdss_in7: endpoint { + remote-endpoint = <&tpdm_vsense_out>; + }; + }; + + port@8 { + reg = <8>; + + tpda_qdss_in8: endpoint { + remote-endpoint = <&tpdm_dcc_out>; + }; + }; + + port@9 { + reg = <9>; + + tpda_qdss_in9: endpoint { + remote-endpoint = <&tpdm_prng_out>; + }; + }; + + port@b { + reg = <11>; + + tpda_qdss_in11: endpoint { + remote-endpoint = <&tpdm_qm_out>; + }; + }; + + port@c { + reg = <12>; + + tpda_qdss_in12: endpoint { + remote-endpoint = <&tpdm_west_out>; + }; + }; + + port@d { + reg = <13>; + + tpda_qdss_in13: endpoint { + remote-endpoint = <&tpdm_pimem_out>; + }; + }; + }; + + out-ports { + port { + tpda_qdss_out: endpoint { + remote-endpoint = <&funnel_qatb_in>; + }; + }; + }; + }; + + funnel@6005000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x06005000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + funnel_qatb_in: endpoint { + remote-endpoint = <&tpda_qdss_out>; + }; + }; + }; + + out-ports { + port { + funnel_qatb_out: endpoint { + remote-endpoint = <&funnel_in0_in6>; + }; + }; + }; + }; + + cti@6010000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06010000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@6011000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06011000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@6012000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06012000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@6013000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06013000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@6014000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06014000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@6015000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06015000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@6016000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06016000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@6017000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06017000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@6018000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06018000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@6019000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06019000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@601a000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x0601a000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@601b000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x0601b000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@601c000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x0601c000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@601d000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x0601d000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@601e000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x0601e000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@601f000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x0601f000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + funnel@6041000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x06041000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@6 { + reg = <6>; + + funnel_in0_in6: endpoint { + remote-endpoint = <&funnel_qatb_out>; + }; + }; + + port@7 { + reg = <7>; + + funnel_in0_in7: endpoint { + remote-endpoint = <&stm_out>; + }; + }; + }; + + out-ports { + port { + funnel_in0_out: endpoint { + remote-endpoint = <&funnel_merg_in0>; + }; + }; + }; + }; + + funnel@6042000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x06042000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@3 { + reg = <3>; + + funnel_in1_in3: endpoint { + remote-endpoint = <&replicator_swao_out0>; + }; + }; + + port@4 { + reg = <4>; + + funnel_in1_in4: endpoint { + remote-endpoint = <&tpdm_wcss_out>; + }; + }; + + port@7 { + reg = <7>; + + funnel_in1_in7: endpoint { + remote-endpoint = <&funnel_apss_merg_out>; + }; + }; + }; + + out-ports { + port { + funnel_in1_out: endpoint { + remote-endpoint = <&funnel_merg_in1>; + }; + }; + }; + }; + + funnel@6045000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x06045000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + funnel_merg_in0: endpoint { + remote-endpoint = <&funnel_in0_out>; + }; + }; + + port@1 { + reg = <1>; + + funnel_merg_in1: endpoint { + remote-endpoint = <&funnel_in1_out>; + }; + }; + }; + + out-ports { + port { + funnel_merg_out: endpoint { + remote-endpoint = <&tmc_etf_in>; + }; + }; + }; + }; + + replicator@6046000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0x0 0x06046000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + replicator0_in: endpoint { + remote-endpoint = <&tmc_etf_out>; + }; + }; + }; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + replicator0_out1: endpoint { + remote-endpoint = <&replicator1_in>; + }; + }; + }; + }; + + tmc@6047000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x0 0x06047000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + tmc_etf_in: endpoint { + remote-endpoint = <&funnel_merg_out>; + }; + }; + }; + + out-ports { + port { + tmc_etf_out: endpoint { + remote-endpoint = <&replicator0_in>; + }; + }; + }; + }; + + replicator@604a000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0x0 0x0604a000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + status = "disabled"; + + in-ports { + port { + replicator1_in: endpoint { + remote-endpoint = <&replicator0_out1>; + }; + }; + }; + + out-ports { + port { + replicator1_out: endpoint { + remote-endpoint = <&funnel_swao_in6>; + }; + }; + }; + }; + + cti@683b000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x0683b000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + tpdm@6840000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x06840000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + status = "disabled"; + + out-ports { + port { + tpdm_vsense_out: endpoint { + remote-endpoint = <&tpda_qdss_in7>; + }; + }; + }; + }; + + tpdm@684c000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x0684c000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + tpdm_prng_out: endpoint { + remote-endpoint = <&tpda_qdss_in9>; + }; + }; + }; + }; + + tpdm@6850000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x06850000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + tpdm_pimem_out: endpoint { + remote-endpoint = <&tpda_qdss_in13>; + }; + }; + }; + }; + + tpdm@6860000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x06860000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + tpdm_turing_out: endpoint { + remote-endpoint = <&funnel_turing_in>; + }; + }; + }; + }; + + funnel@6861000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x06861000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + funnel_turing_in: endpoint { + remote-endpoint = <&tpdm_turing_out>; + }; + }; + }; + + out-ports { + port { + funnel_turing_out: endpoint { + remote-endpoint = <&tpda_qdss_in6>; + }; + }; + }; + }; + + cti@6867000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06867000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + tpdm@6870000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x06870000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + status = "disabled"; + + out-ports { + port { + tpdm_dcc_out: endpoint { + remote-endpoint = <&tpda_qdss_in8>; + }; + }; + }; + }; + + tpdm@699c000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x0699c000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + status = "disabled"; + + out-ports { + port { + tpdm_wcss_out: endpoint { + remote-endpoint = <&funnel_in1_in4>; + }; + }; + }; + }; + + tpdm@69c0000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x069c0000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + tpdm_monaq_out: endpoint { + remote-endpoint = <&funnel_monaq_in>; + }; + }; + }; + }; + + funnel@69c3000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x069c3000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + funnel_monaq_in: endpoint { + remote-endpoint = <&tpdm_monaq_out>; + }; + }; + }; + + out-ports { + port { + funnel_monaq_out: endpoint { + remote-endpoint = <&tpda_qdss_in4>; + }; + }; + }; + }; + + tpdm@69d0000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x069d0000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + status = "disabled"; + + out-ports { + port { + tpdm_qm_out: endpoint { + remote-endpoint = <&tpda_qdss_in11>; + }; + }; + }; + }; + + tpdm@6a00000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x06a00000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + status = "disabled"; + + out-ports { + port { + tpdm_ddr_out: endpoint { + remote-endpoint = <&funnel_ddr_0_in>; + }; + }; + }; + }; + + cti@6a02000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06a02000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@6a03000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06a03000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@6a10000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06a10000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@6a11000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06a11000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + funnel@6a05000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x06a05000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + funnel_ddr_0_in: endpoint { + remote-endpoint = <&tpdm_ddr_out>; + }; + }; + }; + + out-ports { + port { + funnel_ddr_0_out: endpoint { + remote-endpoint = <&tpda_qdss_in5>; + }; + }; + }; + }; + + tpda@6b01000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x06b01000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tpda_swao_in0: endpoint { + remote-endpoint = <&tpdm_swao0_out>; + }; + }; + + port@1 { + reg = <1>; + + tpda_swao_in1: endpoint { + remote-endpoint = <&tpdm_swao1_out>; + }; + + }; + }; + + out-ports { + port { + tpda_swao_out: endpoint { + remote-endpoint = <&funnel_swao_in7>; + }; + }; + }; + }; + + tpdm@6b02000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x06b02000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + status = "disabled"; + + out-ports { + port { + tpdm_swao0_out: endpoint { + remote-endpoint = <&tpda_swao_in0>; + }; + }; + }; + }; + + tpdm@6b03000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x06b03000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + status = "disabled"; + + out-ports { + port { + tpdm_swao1_out: endpoint { + remote-endpoint = <&tpda_swao_in1>; + }; + }; + }; + }; + + cti@6b04000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06b04000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@6b05000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06b05000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@6b06000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06b06000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@6b07000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06b07000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + funnel@6b08000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x06b08000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@6 { + reg = <6>; + + funnel_swao_in6: endpoint { + remote-endpoint = <&replicator1_out>; + }; + }; + + port@7 { + reg = <7>; + + funnel_swao_in7: endpoint { + remote-endpoint = <&tpda_swao_out>; + }; + }; + }; + + out-ports { + port { + funnel_swao_out: endpoint { + remote-endpoint = <&tmc_etf_swao_in>; + }; + }; + }; + }; + + tmc@6b09000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x0 0x06b09000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + tmc_etf_swao_in: endpoint { + remote-endpoint = <&funnel_swao_out>; + }; + }; + }; + + out-ports { + port { + tmc_etf_swao_out: endpoint { + remote-endpoint = <&replicator_swao_in>; + }; + }; + }; + }; + + replicator@6b0a000 { + compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; + reg = <0x0 0x06b0a000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + replicator_swao_in: endpoint { + remote-endpoint = <&tmc_etf_swao_out>; + }; + }; + }; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + replicator_swao_out0: endpoint { + remote-endpoint = <&funnel_in1_in3>; + }; + }; + + port@1 { + reg = <1>; + + replicator_swao_out1: endpoint { + remote-endpoint = <&eud_in>; + }; + }; + }; + }; + + cti@6b21000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06b21000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + tpdm@6b48000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x06b48000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + tpdm_west_out: endpoint { + remote-endpoint = <&tpda_qdss_in12>; + }; + }; + }; + }; + + cti@6c13000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06c13000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + /* Not all required clocks can be enabled from the OS */ + status = "fail"; + }; + + cti@6c20000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06c20000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + tpdm@6c28000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x06c28000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + tpdm_center_out: endpoint { + remote-endpoint = <&tpda_qdss_in0>; + }; + }; + }; + }; + + cti@6c29000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06c29000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@6c2a000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x06c2a000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@7020000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x07020000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + etm@7040000 { + compatible = "arm,primecell"; + reg = <0x0 0x07040000 0x0 0x1000>; + cpu = <&cpu0>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&funnel_apss_in0>; + }; + }; + }; + }; + + cti@7120000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x07120000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + etm@7140000 { + compatible = "arm,primecell"; + reg = <0x0 0x07140000 0x0 0x1000>; + cpu = <&cpu1>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&funnel_apss_in1>; + }; + }; + }; + }; + + cti@7220000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x07220000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + etm@7240000 { + compatible = "arm,primecell"; + reg = <0x0 0x07240000 0x0 0x1000>; + cpu = <&cpu2>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&funnel_apss_in2>; + }; + }; + }; + }; + + cti@7320000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x07320000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + etm@7340000 { + compatible = "arm,primecell"; + reg = <0x0 0x07340000 0x0 0x1000>; + cpu = <&cpu3>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&funnel_apss_in3>; + }; + }; + }; + }; + + cti@7420000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x07420000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + etm@7440000 { + compatible = "arm,primecell"; + reg = <0x0 0x07440000 0x0 0x1000>; + cpu = <&cpu4>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = <&funnel_apss_in4>; + }; + }; + }; + }; + + cti@7520000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x07520000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + etm@7540000 { + compatible = "arm,primecell"; + reg = <0x0 0x07540000 0x0 0x1000>; + cpu = <&cpu5>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = <&funnel_apss_in5>; + }; + }; + }; + }; + + cti@7620000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x07620000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + etm@7640000 { + compatible = "arm,primecell"; + reg = <0x0 0x07640000 0x0 0x1000>; + cpu = <&cpu6>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = <&funnel_apss_in6>; + }; + }; + }; + }; + + cti@7720000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x07720000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + etm@7740000 { + compatible = "arm,primecell"; + reg = <0x0 0x07740000 0x0 0x1000>; + cpu = <&cpu7>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = <&funnel_apss_in7>; + }; + }; + }; + }; + + funnel@7800000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x07800000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + funnel_apss_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + + funnel_apss_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + + funnel_apss_in2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + + funnel_apss_in3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + + port@4 { + reg = <4>; + + funnel_apss_in4: endpoint { + remote-endpoint = <&etm4_out>; + }; + }; + + port@5 { + reg = <5>; + + funnel_apss_in5: endpoint { + remote-endpoint = <&etm5_out>; + }; + }; + + port@6 { + reg = <6>; + + funnel_apss_in6: endpoint { + remote-endpoint = <&etm6_out>; + }; + }; + + port@7 { + reg = <7>; + + funnel_apss_in7: endpoint { + remote-endpoint = <&etm7_out>; + }; + }; + }; + + out-ports { + port { + funnel_apss_out: endpoint { + remote-endpoint = <&funnel_apss_merg_in0>; + }; + }; + }; + }; + + funnel@7810000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0x0 0x07810000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + funnel_apss_merg_in0: endpoint { + remote-endpoint = <&funnel_apss_out>; + }; + }; + + port@2 { + reg = <2>; + + funnel_apss_merg_in2: endpoint { + remote-endpoint = <&tpda_olc_out>; + }; + }; + + port@3 { + reg = <3>; + + funnel_apss_merg_in3: endpoint { + remote-endpoint = <&tpda_llm_silver_out>; + }; + }; + + port@4 { + reg = <4>; + + funnel_apss_merg_in4: endpoint { + remote-endpoint = <&tpda_llm_gold_out>; + }; + }; + + port@5 { + reg = <5>; + + funnel_apss_merg_in5: endpoint { + remote-endpoint = <&tpda_apss_out>; + }; + }; + }; + + out-ports { + port { + funnel_apss_merg_out: endpoint { + remote-endpoint = <&funnel_in1_in7>; + }; + }; + }; + }; + + tpdm@7830000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x07830000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <64>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + tpdm_olc_out: endpoint { + remote-endpoint = <&tpda_olc_in>; + }; + }; + }; + }; + + tpda@7832000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x07832000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + tpda_olc_in: endpoint { + remote-endpoint = <&tpdm_olc_out>; + }; + }; + }; + + out-ports { + port { + tpda_olc_out: endpoint { + remote-endpoint = <&funnel_apss_merg_in2>; + }; + }; + }; + }; + + tpdm@7860000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x07860000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,dsb-element-bits = <32>; + qcom,dsb-msrs-num = <32>; + + out-ports { + port { + tpdm_apss_out: endpoint { + remote-endpoint = <&tpda_apss_in>; + }; + }; + }; + }; + + tpda@7862000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x07862000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + tpda_apss_in: endpoint { + remote-endpoint = <&tpdm_apss_out>; + }; + }; + }; + + out-ports { + port { + tpda_apss_out: endpoint { + remote-endpoint = <&funnel_apss_merg_in5>; + }; + }; + }; + }; + + tpdm@78a0000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x078a0000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + tpdm_llm_silver_out: endpoint { + remote-endpoint = <&tpda_llm_silver_in>; + }; + }; + }; + }; + + tpdm@78b0000 { + compatible = "qcom,coresight-tpdm", "arm,primecell"; + reg = <0x0 0x078b0000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + qcom,cmb-element-bits = <32>; + qcom,cmb-msrs-num = <32>; + + out-ports { + port { + tpdm_llm_gold_out: endpoint { + remote-endpoint = <&tpda_llm_gold_in>; + }; + }; + }; + }; + + tpda@78c0000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x078c0000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + tpda_llm_silver_in: endpoint { + remote-endpoint = <&tpdm_llm_silver_out>; + }; + }; + }; + + out-ports { + port { + tpda_llm_silver_out: endpoint { + remote-endpoint = <&funnel_apss_merg_in3>; + }; + }; + }; + }; + + tpda@78d0000 { + compatible = "qcom,coresight-tpda", "arm,primecell"; + reg = <0x0 0x078d0000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + + in-ports { + port { + tpda_llm_gold_in: endpoint { + remote-endpoint = <&tpdm_llm_gold_out>; + }; + }; + }; + + out-ports { + port { + tpda_llm_gold_out: endpoint { + remote-endpoint = <&funnel_apss_merg_in4>; + }; + }; + }; + }; + + cti@78e0000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x078e0000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@78f0000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x078f0000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + cti@7900000 { + compatible = "arm,coresight-cti", "arm,primecell"; + reg = <0x0 0x07900000 0x0 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb_pclk"; + }; + + remoteproc_cdsp: remoteproc@8300000 { + compatible = "qcom,qcs615-cdsp-pas", "qcom,sm8150-cdsp-pas"; + reg = <0x0 0x08300000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_CX>; + power-domain-names = "cx"; + + memory-region = <&rproc_cdsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = ; + mboxes = <&apss_shared 4>; + label = "cdsp"; + qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x1081 0x0>; + dma-coherent; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x1082 0x0>; + dma-coherent; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1083 0x0>; + dma-coherent; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1084 0x0>; + dma-coherent; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1085 0x0>; + dma-coherent; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x1086 0x0>; + dma-coherent; + }; + }; + }; + }; + + pmu@90b6300 { + compatible = "qcom,qcs615-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0x0 0x090b6300 0x0 0x600>; + interrupts = ; + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <12896000>; + }; + + opp-1 { + opp-peak-kBps = <14928000>; + }; + }; + }; + + pmu@90cd000 { + compatible = "qcom,qcs615-llcc-bwmon", "qcom,sc7280-llcc-bwmon"; + reg = <0x0 0x090cd000 0x0 0x1000>; + interrupts = ; + interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&llcc_bwmon_opp_table>; + + llcc_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <800000>; + }; + + opp-1 { + opp-peak-kBps = <1200000>; + }; + + opp-2 { + opp-peak-kBps = <1804800>; + }; + + opp-3 { + opp-peak-kBps = <2188800>; + }; + + opp-4 { + opp-peak-kBps = <2726400>; + }; + + opp-5 { + opp-peak-kBps = <3072000>; + }; + + opp-6 { + opp-peak-kBps = <4070400>; + }; + + opp-7 { + opp-peak-kBps = <5414400>; + }; + + opp-8 { + opp-peak-kBps = <6220800>; + }; + }; + }; + + sdhc_2: mmc@8804000 { + compatible = "qcom,qcs615-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0 0x08804000 0x0 0x1000>; + reg-names = "hc"; + + interrupts = , + ; + interrupt-names = "hc_irq", + "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "core", + "xo"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + iommus = <&apps_smmu 0x02a0 0x0>; + resets = <&gcc GCC_SDCC2_BCR>; + interconnects = <&aggre1_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "sdhc-ddr", + "cpu-sdhc"; + + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + dma-coherent; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + dc_noc: interconnect@9160000 { + reg = <0x0 0x09160000 0x0 0x3200>; + compatible = "qcom,qcs615-dc-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + llcc: system-cache-controller@9200000 { + compatible = "qcom,qcs615-llcc"; + reg = <0x0 0x09200000 0x0 0x50000>, + <0x0 0x09600000 0x0 0x50000>; + reg-names = "llcc0_base", + "llcc_broadcast_base"; + }; + + gem_noc: interconnect@9680000 { + reg = <0x0 0x09680000 0x0 0x3e200>; + compatible = "qcom,qcs615-gem-noc"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + venus: video-codec@aa00000 { + compatible = "qcom,qcs615-venus", "qcom,sc7180-venus"; + reg = <0x0 0x0aa00000 0x0 0x100000>; + interrupts = ; + + clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>, + <&videocc VIDEO_CC_VENUS_AHB_CLK>, + <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>, + <&videocc VIDEO_CC_VCODEC0_CORE_CLK>, + <&videocc VIDEO_CC_VCODEC0_AXI_CLK>; + clock-names = "core", + "iface", + "bus", + "vcodec0_core", + "vcodec0_bus"; + + power-domains = <&videocc VENUS_GDSC>, + <&videocc VCODEC0_GDSC>, + <&rpmhpd RPMHPD_CX>; + power-domain-names = "venus", + "vcodec0", + "cx"; + + operating-points-v2 = <&venus_opp_table>; + + interconnects = <&mmss_noc MASTER_VIDEO_P0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "video-mem", + "cpu-cfg"; + + iommus = <&apps_smmu 0xe60 0x20>; + + memory-region = <&pil_video_mem>; + + status = "disabled"; + + venus_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-133330000 { + opp-hz = /bits/ 64 <133330000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-240000000 { + opp-hz = /bits/ 64 <240000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-380000000 { + opp-hz = /bits/ 64 <380000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-410000000 { + opp-hz = /bits/ 64 <410000000>; + required-opps = <&rpmhpd_opp_nom_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_turbo>; + }; + }; + }; + + videocc: clock-controller@ab00000 { + compatible = "qcom,qcs615-videocc"; + reg = <0 0x0ab00000 0 0x10000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + camcc: clock-controller@ad00000 { + compatible = "qcom,qcs615-camcc"; + reg = <0 0x0ad00000 0 0x10000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + mdss: display-subsystem@ae00000 { + compatible = "qcom,sm6150-mdss"; + reg = <0x0 0x0ae00000 0x0 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; + + power-domains = <&dispcc MDSS_CORE_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + + interrupts = ; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x800 0x0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,sm6150-dpu"; + reg = <0x0 0x0ae01000 0x0 0x8f000>, + <0x0 0x0aeb0000 0x0 0x2008>; + reg-names = "mdp", + "vbif"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_CX>; + + interrupts-extended = <&mdss 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dpu_intf0_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-256000000 { + opp-hz = /bits/ 64 <256000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-307200000 { + opp-hz = /bits/ 64 <307200000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dsi0: dsi@ae94000 { + compatible = "qcom,sm6150-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0 0x0ae94000 0x0 0x400>; + reg-names = "dsi_ctrl"; + + interrupts-extended = <&mdss 4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; + + operating-points-v2 = <&dsi0_opp_table>; + power-domains = <&rpmhpd RPMHPD_CX>; + + phys = <&mdss_dsi0_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + dsi0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-164000000 { + opp-hz = /bits/ 64 <164000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@ae94400 { + compatible = "qcom,sm6150-dsi-phy-14nm"; + reg = <0x0 0x0ae94400 0x0 0x100>, + <0x0 0x0ae94500 0x0 0x300>, + <0x0 0x0ae94800 0x0 0x124>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "ref"; + + status = "disabled"; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,qcs615-dispcc"; + reg = <0 0x0af00000 0 0x20000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, + <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>, + <0>, + <0>, + <0>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,qcs615-pdc", "qcom,pdc"; + reg = <0x0 0x0b220000 0x0 0x30000>, + <0x0 0x17c000f0 0x0 0x64>; + qcom,pdc-ranges = <0 480 94>, <94 609 31>, <125 63 1>; + interrupt-parent = <&intc>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + aoss_qmp: power-management@c300000 { + compatible = "qcom,qcs615-aoss-qmp", "qcom,aoss-qmp"; + reg = <0x0 0x0c300000 0x0 0x400>; + interrupts = ; + mboxes = <&apss_shared 0>; + + #clock-cells = <0>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0x0 0x0c3f0000 0x0 0x400>; + }; + + sram@14680000 { + compatible = "qcom,qcs615-imem", "syscon", "simple-mfd"; + reg = <0x0 0x14680000 0x0 0x2c000>; + ranges = <0 0 0x14680000 0x2c000>; + + #address-cells = <1>; + #size-cells = <1>; + + pil-reloc@2a94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x2a94c 0xc8>; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,qcs615-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x15000000 0x0 0x80000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + dma-coherent; + + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0 0x0c440000 0x0 0x1100>, + <0x0 0x0c600000 0x0 0x2000000>, + <0x0 0x0e600000 0x0 0x100000>, + <0x0 0x0e700000 0x0 0xa0000>, + <0x0 0x0c40a000 0x0 0x26000>; + reg-names = "core", + "chnls", + "obsrvr", + "intr", + "cnfg"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + interrupt-controller; + #interrupt-cells = <4>; + #address-cells = <2>; + #size-cells = <0>; + qcom,channel = <0>; + qcom,ee = <0>; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupts = ; + #address-cells = <0>; + #interrupt-cells = <3>; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + }; + + apss_shared: mailbox@17c00000 { + compatible = "qcom,qcs615-apss-shared", + "qcom,sdm845-apss-shared"; + reg = <0x0 0x17c00000 0x0 0x1000>; + #mbox-cells = <1>; + }; + + watchdog: watchdog@17c10000 { + compatible = "qcom,apss-wdt-qcs615", "qcom,kpss-wdt"; + reg = <0x0 0x17c10000 0x0 0x1000>; + interrupts = ; + clocks = <&sleep_clk>; + }; + + timer@17c20000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17c20000 0x0 0x1000>; + ranges = <0 0 0 0x20000000>; + #address-cells = <1>; + #size-cells = <1>; + + frame@17c21000 { + reg = <0x17c21000 0x1000>, + <0x17c22000 0x1000>; + frame-number = <0>; + interrupts = , + ; + }; + + frame@17c23000 { + reg = <0x17c23000 0x1000>; + frame-number = <1>; + interrupts = ; + status = "disabled"; + }; + + frame@17c25000 { + reg = <0x17c25000 0x1000>; + frame-number = <2>; + interrupts = ; + status = "disabled"; + }; + + frame@17c27000 { + reg = <0x17c27000 0x1000>; + frame-number = <3>; + interrupts = ; + status = "disabled"; + }; + + frame@17c29000 { + reg = <0x17c29000 0x1000>; + frame-number = <4>; + interrupts = ; + status = "disabled"; + }; + + frame@17c2b000 { + reg = <0x17c2b000 0x1000>; + frame-number = <5>; + interrupts = ; + status = "disabled"; + }; + + frame@17c2d000 { + reg = <0x17c2d000 0x1000>; + frame-number = <6>; + interrupts = ; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", + "drv-1", + "drv-2"; + + interrupts = , + , + ; + + qcom,drv-id = <2>; + qcom,tcs-offset = <0xd00>; + qcom,tcs-config = , + , + , + ; + + label = "apps_rsc"; + power-domains = <&cluster_pd>; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,qcs615-rpmh-clk"; + clocks = <&xo_board_clk>; + clock-names = "xo"; + + #clock-cells = <1>; + }; + + rpmhpd: power-controller { + compatible = "qcom,qcs615-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp-0 { + opp-level = ; + }; + + rpmhpd_opp_min_svs: opp-1 { + opp-level = ; + }; + + rpmhpd_opp_low_svs: opp-2 { + opp-level = ; + }; + + rpmhpd_opp_svs: opp-3 { + opp-level = ; + }; + + rpmhpd_opp_svs_l1: opp-4 { + opp-level = ; + }; + + rpmhpd_opp_nom: opp-5 { + opp-level = ; + }; + + rpmhpd_opp_nom_l1: opp-6 { + opp-level = ; + }; + + rpmhpd_opp_nom_l2: opp-7 { + opp-level = ; + }; + + rpmhpd_opp_turbo: opp-8 { + opp-level = ; + }; + + rpmhpd_opp_turbo_l1: opp-9 { + opp-level = ; + }; + }; + }; + }; + + osm_l3: interconnect@18321000 { + compatible = "qcom,qcs615-osm-l3", "qcom,sm8150-osm-l3", "qcom,osm-l3"; + reg = <0x0 0x18321000 0x0 0x1400>; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #interconnect-cells = <1>; + }; + + usb_1_hsphy: phy@88e2000 { + compatible = "qcom,qcs615-qusb2-phy"; + reg = <0x0 0x88e2000 0x0 0x180>; + + clocks = <&gcc GCC_AHB2PHY_WEST_CLK>, <&rpmhcc RPMH_CXO_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + nvmem-cells = <&qusb2_hstx_trim>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_hsphy_2: phy@88e3000 { + compatible = "qcom,qcs615-qusb2-phy"; + reg = <0x0 0x088e3000 0x0 0x180>; + + clocks = <&gcc GCC_AHB2PHY_WEST_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "cfg_ahb", + "ref"; + + resets = <&gcc GCC_QUSB2PHY_SEC_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_qmpphy: phy@88e6000 { + compatible = "qcom,qcs615-qmp-usb3-phy"; + reg = <0x0 0x88e6000 0x0 0x1000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_AHB2PHY_WEST_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + + resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>, + <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>; + reset-names = "phy", "phy_phy"; + + qcom,tcsr-reg = <&tcsr 0xb244>; + + clock-output-names = "usb3_phy_pipe_clk_src"; + #clock-cells = <0>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,qcs615-dwc3", "qcom,dwc3"; + reg = <0x0 0x0a6f8800 0x0 0x400>; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 9 IRQ_TYPE_EDGE_BOTH>, + <&pdc 8 IRQ_TYPE_EDGE_BOTH>, + <&pdc 6 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq", + "ss_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0x0 0x0a600000 0x0 0xcd00>; + + iommus = <&apps_smmu 0x140 0x0>; + interrupts = ; + + phys = <&usb_1_hsphy>, <&usb_qmpphy>; + phy-names = "usb2-phy", "usb3-phy"; + + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x10>; + snps,usb3_lpm_capable; + }; + }; + + usb_2: usb@a8f8800 { + compatible = "qcom,qcs615-dwc3", "qcom,dwc3"; + reg = <0x0 0x0a8f8800 0x0 0x400>; + + clocks = <&gcc GCC_CFG_NOC_USB2_SEC_AXI_CLK>, + <&gcc GCC_USB20_SEC_MASTER_CLK>, + <&gcc GCC_AGGRE_USB2_SEC_AXI_CLK>, + <&gcc GCC_USB20_SEC_SLEEP_CLK>, + <&gcc GCC_USB20_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB2_PRIM_CLKREF_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB20_SEC_MOCK_UTMI_CLK>, + <&gcc GCC_USB20_SEC_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 663 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 662 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 11 IRQ_TYPE_EDGE_BOTH>, + <&pdc 10 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "pwr_event", + "hs_phy_irq", + "dp_hs_phy_irq", + "dm_hs_phy_irq"; + + power-domains = <&gcc USB20_SEC_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB20_SEC_BCR>; + + qcom,select-utmi-as-pipe-clk; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_2_dwc3: usb@a800000 { + compatible = "snps,dwc3"; + reg = <0x0 0x0a800000 0x0 0xcd00>; + + iommus = <&apps_smmu 0xe0 0x0>; + interrupts = ; + + phys = <&usb_hsphy_2>; + phy-names = "usb2-phy"; + + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x10>; + + maximum-speed = "high-speed"; + }; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,qcs615-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c263000 0x0 0x1000>, + <0x0 0x0c222000 0x0 0x1000>; + interrupts = , + ; + interrupt-names = "uplow", "critical"; + #qcom,sensors = <16>; + #thermal-sensor-cells = <1>; + }; + + remoteproc_adsp: remoteproc@62400000 { + compatible = "qcom,qcs615-adsp-pas", "qcom,sm8150-adsp-pas"; + reg = <0x0 0x62400000 0x0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_CX>; + power-domain-names = "cx"; + + memory-region = <&rproc_adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink_edge: glink-edge { + interrupts = ; + mboxes = <&apss_shared 24>; + label = "lpass"; + qcom,remote-pid = <2>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1723 0x0>; + dma-coherent; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1724 0x0>; + dma-coherent; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1725 0x0>; + dma-coherent; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x1726 0x0>; + qcom,nsessions = <5>; + dma-coherent; + }; + }; + }; + }; + + cpufreq_hw: cpufreq@18323000 { + compatible = "qcom,qcs615-cpufreq-hw", "qcom,cpufreq-hw"; + reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>; + reg-names = "freq-domain0", "freq-domain1"; + + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + }; + + arch_timer: timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + thermal-zones { + aoss-thermal { + thermal-sensors = <&tsens0 0>; + + trips { + aoss-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss-0-thermal { + thermal-sensors = <&tsens0 1>; + + trips { + cpuss0-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss-1-thermal { + thermal-sensors = <&tsens0 2>; + + trips { + cpuss1-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss-2-thermal { + thermal-sensors = <&tsens0 3>; + + trips { + cpuss2-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpuss-3-thermal { + thermal-sensors = <&tsens0 4>; + + trips { + cpuss3-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-1-0-thermal { + thermal-sensors = <&tsens0 5>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-1-1-thermal { + thermal-sensors = <&tsens0 6>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-1-2-thermal { + thermal-sensors = <&tsens0 7>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu-1-3-thermal { + thermal-sensors = <&tsens0 8>; + + trips { + cpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + gpu-thermal { + thermal-sensors = <&tsens0 9>; + + trips { + gpu-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + q6-hvx-thermal { + thermal-sensors = <&tsens0 10>; + + trips { + q6-hvx-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + mdm-core-thermal { + thermal-sensors = <&tsens0 11>; + + trips { + mdm-core-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + camera-thermal { + thermal-sensors = <&tsens0 12>; + + trips { + camera-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + wlan-thermal { + thermal-sensors = <&tsens0 13>; + + trips { + wlan-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + display-thermal { + thermal-sensors = <&tsens0 14>; + + trips { + display-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + video-thermal { + thermal-sensors = <&tsens0 15>; + + trips { + video-critical { + temperature = <115000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi b/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi index ee3c8c5e2c50c4..8e5c5575a53201 100644 --- a/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi +++ b/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi @@ -11,10 +11,9 @@ #include #include -#include "x1e80100-pmics.dtsi" +#include "hamoa-pmics.dtsi" / { - model = "ASUS Zenbook A14"; chassis-type = "laptop"; aliases { @@ -1005,14 +1004,10 @@ &mdss_dp3 { status = "okay"; aux-bus { - panel { + panel: panel { compatible = "edp-panel"; - enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; power-supply = <&vreg_edp_3p3>; - pinctrl-0 = <&edp_bl_en>; - pinctrl-names = "default"; - port { edp_panel_in: endpoint { remote-endpoint = <&mdss_dp3_out>; diff --git a/arch/arm64/boot/dts/qcom/x1-crd.dtsi b/arch/arm64/boot/dts/qcom/x1-crd.dtsi index 3c9455fede5c09..ded96fb43489b9 100644 --- a/arch/arm64/boot/dts/qcom/x1-crd.dtsi +++ b/arch/arm64/boot/dts/qcom/x1-crd.dtsi @@ -9,7 +9,7 @@ #include #include -#include "x1e80100-pmics.dtsi" +#include "hamoa-pmics.dtsi" / { model = "Qualcomm Technologies, Inc. X1E80100 CRD"; @@ -82,6 +82,13 @@ pmic-glink { <&tlmm 123 GPIO_ACTIVE_HIGH>, <&tlmm 125 GPIO_ACTIVE_HIGH>; + nvmem-cells = <&charge_limit_en>, + <&charge_limit_end>, + <&charge_limit_delta>; + nvmem-cell-names = "charge_limit_en", + "charge_limit_end", + "charge_limit_delta"; + /* Left-side rear port */ connector@0 { compatible = "usb-c-connector"; diff --git a/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi b/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi index cc64558ed5e6fa..bf04a12b16bc93 100644 --- a/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi +++ b/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi @@ -12,7 +12,7 @@ #include #include -#include "x1e80100-pmics.dtsi" +#include "hamoa-pmics.dtsi" / { chassis-type = "laptop"; @@ -1023,7 +1023,6 @@ &mdss_dp0 { }; &mdss_dp0_out { - data-lanes = <0 1>; link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; @@ -1032,13 +1031,15 @@ &mdss_dp1 { }; &mdss_dp1_out { - data-lanes = <0 1>; link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; &mdss_dp3 { /delete-property/ #sound-dai-cells; + pinctrl-0 = <&edp0_hpd_default>; + pinctrl-names = "default"; + status = "okay"; aux-bus { diff --git a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts index bfc649d4b643ca..a9643cd746d500 100644 --- a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts +++ b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts @@ -8,8 +8,8 @@ #include #include -#include "x1e80100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "hamoa.dtsi" +#include "hamoa-pmics.dtsi" / { model = "Qualcomm Technologies, Inc. X1E001DE Snapdragon Devkit for Windows"; @@ -763,10 +763,10 @@ vreg_l3j_0p8: ldo3 { &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/x1e80100/Thundercomm/DEVKIT/qcdxkmsuc8380.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/Thundercomm/DEVKIT/qcdxkmsuc8380.mbn"; }; &i2c1 { diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi index 654cbce9d6ecb6..80ece9db875a59 100644 --- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi @@ -12,8 +12,8 @@ #include #include -#include "x1e80100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "hamoa.dtsi" +#include "hamoa-pmics.dtsi" / { model = "Lenovo ThinkPad T14s Gen 6"; @@ -722,10 +722,10 @@ vreg_l3j_0p8: ldo3 { &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/x1e80100/LENOVO/21N1/qcdxkmsuc8380.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/LENOVO/21N1/qcdxkmsuc8380.mbn"; }; &i2c0 { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts index 0113d856b3ad4e..d4df21de0d9598 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts @@ -11,8 +11,8 @@ #include #include -#include "x1e80100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "hamoa.dtsi" +#include "hamoa-pmics.dtsi" / { model = "ASUS Vivobook S 15"; @@ -479,10 +479,10 @@ vreg_l3j_0p8: ldo3 { &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qcdxkmsuc8380.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/ASUSTeK/vivobook-s15/qcdxkmsuc8380.mbn"; }; &i2c0 { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts index 0d0bcc50207d75..0408ade7150fc8 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-zenbook-a14.dts @@ -6,12 +6,71 @@ /dts-v1/; -#include "x1e80100.dtsi" +#include "hamoa.dtsi" #include "x1-asus-zenbook-a14.dtsi" / { model = "ASUS Zenbook A14 (UX3407RA)"; compatible = "asus,zenbook-a14-ux3407ra", "qcom,x1e80100"; + + wcn7850-pmu { + compatible = "qcom,wcn7850-pmu"; + + vdd-supply = <&vreg_wcn_0p95>; + vddio-supply = <&vreg_l15b_1p8>; + vddaon-supply = <&vreg_wcn_0p95>; + vdddig-supply = <&vreg_wcn_0p95>; + vddrfa1p2-supply = <&vreg_wcn_1p9>; + vddrfa1p8-supply = <&vreg_wcn_1p9>; + + bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>; + wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&wcn_bt_en>, <&wcn_wlan_en>; + pinctrl-names = "default"; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p8: ldo7 { + regulator-name = "vreg_pmu_rfa_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; }; &gpu { @@ -22,6 +81,31 @@ &gpu_zap_shader { firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qcdxkmsuc8380.mbn"; }; +&pcie4_port0 { + wifi@0 { + compatible = "pci17cb,1107"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + }; +}; + +&panel { + compatible = "samsung,atna40cu11", "samsung,atna33xc20"; + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&edp_bl_en>; + pinctrl-names = "default"; +}; + &remoteproc_adsp { firmware-name = "qcom/x1e80100/ASUSTeK/zenbook-a14/qcadsp8380.mbn", "qcom/x1e80100/ASUSTeK/zenbook-a14/adsp_dtbs.elf"; @@ -35,3 +119,21 @@ &remoteproc_cdsp { status = "okay"; }; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; + + max-speed = <3000000>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts index dfc378e1a056a8..429deffcf3e9df 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts @@ -5,7 +5,7 @@ /dts-v1/; -#include "x1e80100.dtsi" +#include "hamoa.dtsi" #include "x1-crd.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-inspiron-14-plus-7441.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-inspiron-14-plus-7441.dts index cf2a7c2628881e..75e10d97c38674 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-dell-inspiron-14-plus-7441.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-inspiron-14-plus-7441.dts @@ -4,7 +4,7 @@ */ /dts-v1/; -#include "x1e80100.dtsi" +#include "hamoa.dtsi" #include "x1-dell-thena.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-latitude-7455.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-latitude-7455.dts index 32ad9679550efc..a8ff7ef258a133 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-dell-latitude-7455.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-latitude-7455.dts @@ -4,7 +4,7 @@ */ /dts-v1/; -#include "x1e80100.dtsi" +#include "hamoa.dtsi" #include "x1-dell-thena.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts index 58f8caaa725807..2f533e56c8c841 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts @@ -12,8 +12,8 @@ #include #include -#include "x1e80100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "hamoa.dtsi" +#include "hamoa-pmics.dtsi" / { model = "Dell XPS 13 9345"; @@ -676,10 +676,10 @@ vreg_l3j_0p8: ldo3 { &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/x1e80100/dell/xps13-9345/qcdxkmsuc8380.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/dell/xps13-9345/qcdxkmsuc8380.mbn"; }; &i2c0 { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts index 4ea00d8236935f..0b3b6cb23e1ab9 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-elitebook-ultra-g1q.dts @@ -9,10 +9,8 @@ / { compatible = "hp,elitebook-ultra-g1q", "qcom,x1e80100"; }; -&gpu { - zap-shader { - firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qcdxkmsuc8380.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/hp/elitebook-ultra-g1q/qcdxkmsuc8380.mbn"; }; &remoteproc_adsp { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts index e5a839d458402c..b79e59e1c413ae 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts @@ -6,8 +6,8 @@ /dts-v1/; -#include "x1e80100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "hamoa.dtsi" +#include "hamoa-pmics.dtsi" #include "x1-hp-omnibook-x14.dtsi" / { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts index e0642fe8343f68..4c31d14a07bc67 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts @@ -9,8 +9,8 @@ #include #include -#include "x1e80100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "hamoa.dtsi" +#include "hamoa-pmics.dtsi" / { model = "Lenovo Yoga Slim 7x"; @@ -799,10 +799,10 @@ vreg_l3j_0p8: ldo3 { &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/x1e80100/LENOVO/83ED/qcdxkmsuc8380.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/LENOVO/83ED/qcdxkmsuc8380.mbn"; }; &i2c0 { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi index ed468b93ba50e1..7e1e808ea983b6 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi @@ -9,8 +9,8 @@ #include #include -#include "x1e80100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "hamoa.dtsi" +#include "hamoa-pmics.dtsi" / { aliases { @@ -861,11 +861,11 @@ vreg_l3j: ldo3 { &gpu { status = "okay"; +}; - zap-shader { - memory-region = <&gpu_microcode_mem>; - firmware-name = "qcom/x1e80100/microsoft/qcdxkmsuc8380.mbn"; - }; +&gpu_zap_shader { + memory-region = <&gpu_microcode_mem>; + firmware-name = "qcom/x1e80100/microsoft/qcdxkmsuc8380.mbn"; }; &i2c0 { diff --git a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi b/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi deleted file mode 100644 index 621890ada1536d..00000000000000 --- a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi +++ /dev/null @@ -1,549 +0,0 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * Copyright (c) 2024, Linaro Limited - */ - -#include -#include -#include -#include - -/ { - thermal-zones { - pm8550-thermal { - polling-delay-passive = <100>; - - thermal-sensors = <&pm8550_temp_alarm>; - - trips { - trip0 { - temperature = <95000>; - hysteresis = <0>; - type = "passive"; - }; - - trip1 { - temperature = <115000>; - hysteresis = <0>; - type = "hot"; - }; - }; - }; - - pm8550ve-2-thermal { - polling-delay-passive = <100>; - - thermal-sensors = <&pm8550ve_2_temp_alarm>; - - trips { - trip0 { - temperature = <95000>; - hysteresis = <0>; - type = "passive"; - }; - - trip1 { - temperature = <115000>; - hysteresis = <0>; - type = "hot"; - }; - }; - }; - - pmc8380-3-thermal { - polling-delay-passive = <100>; - - thermal-sensors = <&pmc8380_3_temp_alarm>; - - trips { - trip0 { - temperature = <95000>; - hysteresis = <0>; - type = "passive"; - }; - - trip1 { - temperature = <115000>; - hysteresis = <0>; - type = "hot"; - }; - }; - }; - - pmc8380-4-thermal { - polling-delay-passive = <100>; - - thermal-sensors = <&pmc8380_4_temp_alarm>; - - trips { - trip0 { - temperature = <95000>; - hysteresis = <0>; - type = "passive"; - }; - - trip1 { - temperature = <115000>; - hysteresis = <0>; - type = "hot"; - }; - }; - }; - - pmc8380-5-thermal { - polling-delay-passive = <100>; - - thermal-sensors = <&pmc8380_5_temp_alarm>; - - trips { - trip0 { - temperature = <95000>; - hysteresis = <0>; - type = "passive"; - }; - - trip1 { - temperature = <115000>; - hysteresis = <0>; - type = "hot"; - }; - }; - }; - - pmc8380_6_thermal: pmc8380-6-thermal { - polling-delay-passive = <100>; - - thermal-sensors = <&pmc8380_6_temp_alarm>; - - trips { - trip0 { - temperature = <95000>; - hysteresis = <0>; - type = "passive"; - }; - - trip1 { - temperature = <115000>; - hysteresis = <0>; - type = "hot"; - }; - }; - }; - - pm8550ve-8-thermal { - polling-delay-passive = <100>; - - thermal-sensors = <&pm8550ve_8_temp_alarm>; - - trips { - trip0 { - temperature = <95000>; - hysteresis = <0>; - type = "passive"; - }; - - trip1 { - temperature = <115000>; - hysteresis = <0>; - type = "hot"; - }; - }; - }; - - pm8550ve-9-thermal { - polling-delay-passive = <100>; - - thermal-sensors = <&pm8550ve_9_temp_alarm>; - - trips { - trip0 { - temperature = <95000>; - hysteresis = <0>; - type = "passive"; - }; - - trip1 { - temperature = <115000>; - hysteresis = <0>; - type = "hot"; - }; - }; - }; - - pm8010-thermal { - polling-delay-passive = <100>; - - thermal-sensors = <&pm8010_temp_alarm>; - - trips { - trip0 { - temperature = <95000>; - hysteresis = <0>; - type = "passive"; - }; - - trip1 { - temperature = <115000>; - hysteresis = <0>; - type = "hot"; - }; - }; - }; - }; -}; - -&spmi_bus0 { - /* PMK8380 */ - pmk8550: pmic@0 { - compatible = "qcom,pm8550", "qcom,spmi-pmic"; - reg = <0x0 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pmk8550_pon: pon@1300 { - compatible = "qcom,pmk8350-pon"; - reg = <0x1300>, <0x800>; - reg-names = "hlos", "pbs"; - - pon_pwrkey: pwrkey { - compatible = "qcom,pmk8350-pwrkey"; - interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>; - linux,code = ; - }; - - pon_resin: resin { - compatible = "qcom,pmk8350-resin"; - interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>; - status = "disabled"; - }; - }; - - pmk8550_rtc: rtc@6100 { - compatible = "qcom,pmk8350-rtc"; - reg = <0x6100>, <0x6200>; - reg-names = "rtc", "alarm"; - interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; - qcom,no-alarm; /* alarm owned by ADSP */ - qcom,uefi-rtc-info; - }; - - pmk8550_sdam_2: nvram@7100 { - compatible = "qcom,spmi-sdam"; - reg = <0x7100>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x7100 0x100>; - - reboot_reason: reboot-reason@48 { - reg = <0x48 0x1>; - bits = <1 7>; - }; - }; - - pmk8550_gpios: gpio@8800 { - compatible = "qcom,pmk8550-gpio", "qcom,spmi-gpio"; - reg = <0xb800>; - gpio-controller; - gpio-ranges = <&pmk8550_gpios 0 0 6>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pmk8550_pwm: pwm { - compatible = "qcom,pmk8550-pwm"; - - #pwm-cells = <2>; - - status = "disabled"; - }; - }; - - /* PMC8380C */ - pm8550: pmic@1 { - compatible = "qcom,pm8550", "qcom,spmi-pmic"; - reg = <0x1 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pm8550_temp_alarm: temp-alarm@a00 { - compatible = "qcom,spmi-temp-alarm"; - reg = <0xa00>; - interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; - #thermal-sensor-cells = <0>; - }; - - pm8550_gpios: gpio@8800 { - compatible = "qcom,pm8550-gpio", "qcom,spmi-gpio"; - reg = <0x8800>; - gpio-controller; - gpio-ranges = <&pm8550_gpios 0 0 12>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pm8550_flash: led-controller@ee00 { - compatible = "qcom,pm8550-flash-led", "qcom,spmi-flash-led"; - reg = <0xee00>; - status = "disabled"; - }; - - pm8550_pwm: pwm { - compatible = "qcom,pm8550-pwm", "qcom,pm8350c-pwm"; - #pwm-cells = <2>; - - status = "disabled"; - }; - }; - - /* PMC8380VE */ - pm8550ve_2: pmic@2 { - compatible = "qcom,pm8550", "qcom,spmi-pmic"; - reg = <0x2 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pm8550ve_2_temp_alarm: temp-alarm@a00 { - compatible = "qcom,spmi-temp-alarm"; - reg = <0xa00>; - interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; - #thermal-sensor-cells = <0>; - }; - - pm8550ve_2_gpios: gpio@8800 { - compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio"; - reg = <0x8800>; - gpio-controller; - gpio-ranges = <&pm8550ve_2_gpios 0 0 8>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - /* PMC8380 is actually not a PM8550 series rebrand */ - pmc8380_3: pmic@3 { - compatible = "qcom,pmc8380", "qcom,spmi-pmic"; - reg = <0x3 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pmc8380_3_temp_alarm: temp-alarm@a00 { - compatible = "qcom,spmi-temp-alarm"; - reg = <0xa00>; - interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; - #thermal-sensor-cells = <0>; - }; - - pmc8380_3_gpios: gpio@8800 { - compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio"; - reg = <0x8800>; - gpio-controller; - gpio-ranges = <&pmc8380_3_gpios 0 0 10>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - pmc8380_4: pmic@4 { - compatible = "qcom,pmc8380", "qcom,spmi-pmic"; - reg = <0x4 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pmc8380_4_temp_alarm: temp-alarm@a00 { - compatible = "qcom,spmi-temp-alarm"; - reg = <0xa00>; - interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; - #thermal-sensor-cells = <0>; - }; - - pmc8380_4_gpios: gpio@8800 { - compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio"; - reg = <0x8800>; - gpio-controller; - gpio-ranges = <&pmc8380_4_gpios 0 0 10>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - pmc8380_5: pmic@5 { - compatible = "qcom,pmc8380", "qcom,spmi-pmic"; - reg = <0x5 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pmc8380_5_temp_alarm: temp-alarm@a00 { - compatible = "qcom,spmi-temp-alarm"; - reg = <0xa00>; - interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; - #thermal-sensor-cells = <0>; - }; - - pmc8380_5_gpios: gpio@8800 { - compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio"; - reg = <0x8800>; - gpio-controller; - gpio-ranges = <&pmc8380_5_gpios 0 0 10>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - pmc8380_6: pmic@6 { - compatible = "qcom,pmc8380", "qcom,spmi-pmic"; - reg = <0x6 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pmc8380_6_temp_alarm: temp-alarm@a00 { - compatible = "qcom,spmi-temp-alarm"; - reg = <0xa00>; - interrupts = <0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; - #thermal-sensor-cells = <0>; - }; - - pmc8380_6_gpios: gpio@8800 { - compatible = "qcom,pmc8380-gpio", "qcom,spmi-gpio"; - reg = <0x8800>; - gpio-controller; - gpio-ranges = <&pmc8380_6_gpios 0 0 10>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - /* PMC8380VE */ - pm8550ve_8: pmic@8 { - compatible = "qcom,pm8550", "qcom,spmi-pmic"; - reg = <0x8 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pm8550ve_8_temp_alarm: temp-alarm@a00 { - compatible = "qcom,spmi-temp-alarm"; - reg = <0xa00>; - interrupts = <0x8 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; - #thermal-sensor-cells = <0>; - }; - - pm8550ve_8_gpios: gpio@8800 { - compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio"; - reg = <0x8800>; - gpio-controller; - gpio-ranges = <&pm8550ve_8_gpios 0 0 8>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - /* PMC8380VE */ - pm8550ve_9: pmic@9 { - compatible = "qcom,pm8550", "qcom,spmi-pmic"; - reg = <0x9 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - pm8550ve_9_temp_alarm: temp-alarm@a00 { - compatible = "qcom,spmi-temp-alarm"; - reg = <0xa00>; - interrupts = <0x9 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; - #thermal-sensor-cells = <0>; - }; - - pm8550ve_9_gpios: gpio@8800 { - compatible = "qcom,pm8550ve-gpio", "qcom,spmi-gpio"; - reg = <0x8800>; - gpio-controller; - gpio-ranges = <&pm8550ve_9_gpios 0 0 8>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - pm8010: pmic@c { - compatible = "qcom,pm8010", "qcom,spmi-pmic"; - reg = <0xc SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - - pm8010_temp_alarm: temp-alarm@2400 { - compatible = "qcom,spmi-temp-alarm"; - reg = <0x2400>; - interrupts = <0xc 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; - #thermal-sensor-cells = <0>; - }; - }; -}; - -&spmi_bus1 { - smb2360_0: pmic@7 { - compatible = "qcom,smb2360", "qcom,spmi-pmic"; - reg = <0x7 SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - - smb2360_0_eusb2_repeater: phy@fd00 { - compatible = "qcom,smb2360-eusb2-repeater"; - reg = <0xfd00>; - #phy-cells = <0>; - }; - }; - - smb2360_1: pmic@a { - compatible = "qcom,smb2360", "qcom,spmi-pmic"; - reg = <0xa SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - - smb2360_1_eusb2_repeater: phy@fd00 { - compatible = "qcom,smb2360-eusb2-repeater"; - reg = <0xfd00>; - #phy-cells = <0>; - }; - }; - - smb2360_2: pmic@b { - compatible = "qcom,smb2360", "qcom,spmi-pmic"; - reg = <0xb SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - - smb2360_2_eusb2_repeater: phy@fd00 { - compatible = "qcom,smb2360-eusb2-repeater"; - reg = <0xfd00>; - #phy-cells = <0>; - }; - }; - - smb2360_3: pmic@c { - compatible = "qcom,smb2360", "qcom,spmi-pmic"; - reg = <0xc SPMI_USID>; - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - - smb2360_3_eusb2_repeater: phy@fd00 { - compatible = "qcom,smb2360-eusb2-repeater"; - reg = <0xfd00>; - #phy-cells = <0>; - }; - }; -}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts index 4a9b6d791e7f47..b742aabd9c049e 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts +++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts @@ -8,8 +8,8 @@ #include #include -#include "x1e80100.dtsi" -#include "x1e80100-pmics.dtsi" +#include "hamoa.dtsi" +#include "hamoa-pmics.dtsi" / { model = "Qualcomm Technologies, Inc. X1E80100 QCP"; @@ -831,10 +831,10 @@ vreg_l3j_0p8: ldo3 { &gpu { status = "okay"; +}; - zap-shader { - firmware-name = "qcom/x1e80100/gen70500_zap.mbn"; - }; +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/gen70500_zap.mbn"; }; &i2c5 { diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi deleted file mode 100644 index 51576d9c935dec..00000000000000 --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi +++ /dev/null @@ -1,9550 +0,0 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/ { - interrupt-parent = <&intc>; - - #address-cells = <2>; - #size-cells = <2>; - - chosen { }; - - clocks { - xo_board: xo-board { - compatible = "fixed-clock"; - clock-frequency = <76800000>; - #clock-cells = <0>; - }; - - sleep_clk: sleep-clk { - compatible = "fixed-clock"; - clock-frequency = <32764>; - #clock-cells = <0>; - }; - - bi_tcxo_div2: bi-tcxo-div2-clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-mult = <1>; - clock-div = <2>; - }; - - bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - - clocks = <&rpmhcc RPMH_CXO_CLK_A>; - clock-mult = <1>; - clock-div = <2>; - }; - }; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "qcom,oryon"; - reg = <0x0 0x0>; - enable-method = "psci"; - next-level-cache = <&l2_0>; - power-domains = <&cpu_pd0>, <&scmi_dvfs 0>; - power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; - - l2_0: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - }; - }; - - cpu1: cpu@100 { - device_type = "cpu"; - compatible = "qcom,oryon"; - reg = <0x0 0x100>; - enable-method = "psci"; - next-level-cache = <&l2_0>; - power-domains = <&cpu_pd1>, <&scmi_dvfs 0>; - power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; - }; - - cpu2: cpu@200 { - device_type = "cpu"; - compatible = "qcom,oryon"; - reg = <0x0 0x200>; - enable-method = "psci"; - next-level-cache = <&l2_0>; - power-domains = <&cpu_pd2>, <&scmi_dvfs 0>; - power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; - }; - - cpu3: cpu@300 { - device_type = "cpu"; - compatible = "qcom,oryon"; - reg = <0x0 0x300>; - enable-method = "psci"; - next-level-cache = <&l2_0>; - power-domains = <&cpu_pd3>, <&scmi_dvfs 0>; - power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; - }; - - cpu4: cpu@10000 { - device_type = "cpu"; - compatible = "qcom,oryon"; - reg = <0x0 0x10000>; - enable-method = "psci"; - next-level-cache = <&l2_1>; - power-domains = <&cpu_pd4>, <&scmi_dvfs 1>; - power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; - - l2_1: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - }; - }; - - cpu5: cpu@10100 { - device_type = "cpu"; - compatible = "qcom,oryon"; - reg = <0x0 0x10100>; - enable-method = "psci"; - next-level-cache = <&l2_1>; - power-domains = <&cpu_pd5>, <&scmi_dvfs 1>; - power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; - }; - - cpu6: cpu@10200 { - device_type = "cpu"; - compatible = "qcom,oryon"; - reg = <0x0 0x10200>; - enable-method = "psci"; - next-level-cache = <&l2_1>; - power-domains = <&cpu_pd6>, <&scmi_dvfs 1>; - power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; - }; - - cpu7: cpu@10300 { - device_type = "cpu"; - compatible = "qcom,oryon"; - reg = <0x0 0x10300>; - enable-method = "psci"; - next-level-cache = <&l2_1>; - power-domains = <&cpu_pd7>, <&scmi_dvfs 1>; - power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; - }; - - cpu8: cpu@20000 { - device_type = "cpu"; - compatible = "qcom,oryon"; - reg = <0x0 0x20000>; - enable-method = "psci"; - next-level-cache = <&l2_2>; - power-domains = <&cpu_pd8>, <&scmi_dvfs 2>; - power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; - - l2_2: l2-cache { - compatible = "cache"; - cache-level = <2>; - cache-unified; - }; - }; - - cpu9: cpu@20100 { - device_type = "cpu"; - compatible = "qcom,oryon"; - reg = <0x0 0x20100>; - enable-method = "psci"; - next-level-cache = <&l2_2>; - power-domains = <&cpu_pd9>, <&scmi_dvfs 2>; - power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; - }; - - cpu10: cpu@20200 { - device_type = "cpu"; - compatible = "qcom,oryon"; - reg = <0x0 0x20200>; - enable-method = "psci"; - next-level-cache = <&l2_2>; - power-domains = <&cpu_pd10>, <&scmi_dvfs 2>; - power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; - }; - - cpu11: cpu@20300 { - device_type = "cpu"; - compatible = "qcom,oryon"; - reg = <0x0 0x20300>; - enable-method = "psci"; - next-level-cache = <&l2_2>; - power-domains = <&cpu_pd11>, <&scmi_dvfs 2>; - power-domain-names = "psci", "perf"; - cpu-idle-states = <&cluster_c4>; - }; - - cpu-map { - cluster0 { - core0 { - cpu = <&cpu0>; - }; - - core1 { - cpu = <&cpu1>; - }; - - core2 { - cpu = <&cpu2>; - }; - - core3 { - cpu = <&cpu3>; - }; - }; - - cluster1 { - core0 { - cpu = <&cpu4>; - }; - - core1 { - cpu = <&cpu5>; - }; - - core2 { - cpu = <&cpu6>; - }; - - core3 { - cpu = <&cpu7>; - }; - }; - - cpu_map_cluster2: cluster2 { - core0 { - cpu = <&cpu8>; - }; - - core1 { - cpu = <&cpu9>; - }; - - core2 { - cpu = <&cpu10>; - }; - - core3 { - cpu = <&cpu11>; - }; - }; - }; - - idle-states { - entry-method = "psci"; - - cluster_c4: cpu-sleep-0 { - compatible = "arm,idle-state"; - idle-state-name = "ret"; - arm,psci-suspend-param = <0x00000004>; - entry-latency-us = <180>; - exit-latency-us = <500>; - min-residency-us = <600>; - }; - }; - - domain-idle-states { - cluster_cl4: cluster-sleep-0 { - compatible = "domain-idle-state"; - arm,psci-suspend-param = <0x01000044>; - entry-latency-us = <350>; - exit-latency-us = <500>; - min-residency-us = <2500>; - }; - - cluster_cl5: cluster-sleep-1 { - compatible = "domain-idle-state"; - arm,psci-suspend-param = <0x01000054>; - entry-latency-us = <2200>; - exit-latency-us = <4000>; - min-residency-us = <7000>; - }; - }; - }; - - dummy-sink { - compatible = "arm,coresight-dummy-sink"; - - in-ports { - port { - eud_in: endpoint { - remote-endpoint = <&swao_rep_out1>; - }; - }; - }; - }; - - firmware { - scm: scm { - compatible = "qcom,scm-x1e80100", "qcom,scm"; - interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - qcom,dload-mode = <&tcsr 0x19000>; - }; - - scmi { - compatible = "arm,scmi"; - mboxes = <&cpucp_mbox 0>, <&cpucp_mbox 2>; - mbox-names = "tx", "rx"; - shmem = <&cpu_scp_lpri0>, <&cpu_scp_lpri1>; - - #address-cells = <1>; - #size-cells = <0>; - - scmi_dvfs: protocol@13 { - reg = <0x13>; - #power-domain-cells = <1>; - }; - }; - }; - - clk_virt: interconnect-0 { - compatible = "qcom,x1e80100-clk-virt"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - mc_virt: interconnect-1 { - compatible = "qcom,x1e80100-mc-virt"; - #interconnect-cells = <2>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - - memory@80000000 { - device_type = "memory"; - /* We expect the bootloader to fill in the size */ - reg = <0 0x80000000 0 0>; - }; - - pmu { - compatible = "arm,armv8-pmuv3"; - interrupts = ; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - - cpu_pd0: power-domain-cpu0 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd0>; - }; - - cpu_pd1: power-domain-cpu1 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd0>; - }; - - cpu_pd2: power-domain-cpu2 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd0>; - }; - - cpu_pd3: power-domain-cpu3 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd0>; - }; - - cpu_pd4: power-domain-cpu4 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd1>; - }; - - cpu_pd5: power-domain-cpu5 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd1>; - }; - - cpu_pd6: power-domain-cpu6 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd1>; - }; - - cpu_pd7: power-domain-cpu7 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd1>; - }; - - cpu_pd8: power-domain-cpu8 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd2>; - }; - - cpu_pd9: power-domain-cpu9 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd2>; - }; - - cpu_pd10: power-domain-cpu10 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd2>; - }; - - cpu_pd11: power-domain-cpu11 { - #power-domain-cells = <0>; - power-domains = <&cluster_pd2>; - }; - - cluster_pd0: power-domain-cpu-cluster0 { - #power-domain-cells = <0>; - domain-idle-states = <&cluster_cl4>, <&cluster_cl5>; - power-domains = <&system_pd>; - }; - - cluster_pd1: power-domain-cpu-cluster1 { - #power-domain-cells = <0>; - domain-idle-states = <&cluster_cl4>, <&cluster_cl5>; - power-domains = <&system_pd>; - }; - - cluster_pd2: power-domain-cpu-cluster2 { - #power-domain-cells = <0>; - domain-idle-states = <&cluster_cl4>, <&cluster_cl5>; - power-domains = <&system_pd>; - }; - - system_pd: power-domain-system { - #power-domain-cells = <0>; - /* TODO: system-wide idle states */ - }; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gunyah_hyp_mem: gunyah-hyp@80000000 { - reg = <0x0 0x80000000 0x0 0x800000>; - no-map; - }; - - hyp_elf_package_mem: hyp-elf-package@80800000 { - reg = <0x0 0x80800000 0x0 0x200000>; - no-map; - }; - - ncc_mem: ncc@80a00000 { - reg = <0x0 0x80a00000 0x0 0x400000>; - no-map; - }; - - cpucp_log_mem: cpucp-log@80e00000 { - reg = <0x0 0x80e00000 0x0 0x40000>; - no-map; - }; - - cpucp_mem: cpucp@80e40000 { - reg = <0x0 0x80e40000 0x0 0x540000>; - no-map; - }; - - reserved-region@81380000 { - reg = <0x0 0x81380000 0x0 0x80000>; - no-map; - }; - - tags_mem: tags-region@81400000 { - reg = <0x0 0x81400000 0x0 0x1a0000>; - no-map; - }; - - xbl_dtlog_mem: xbl-dtlog@81a00000 { - reg = <0x0 0x81a00000 0x0 0x40000>; - no-map; - }; - - xbl_ramdump_mem: xbl-ramdump@81a40000 { - reg = <0x0 0x81a40000 0x0 0x1c0000>; - no-map; - }; - - aop_image_mem: aop-image@81c00000 { - reg = <0x0 0x81c00000 0x0 0x60000>; - no-map; - }; - - aop_cmd_db_mem: aop-cmd-db@81c60000 { - compatible = "qcom,cmd-db"; - reg = <0x0 0x81c60000 0x0 0x20000>; - no-map; - }; - - aop_config_mem: aop-config@81c80000 { - reg = <0x0 0x81c80000 0x0 0x20000>; - no-map; - }; - - tme_crash_dump_mem: tme-crash-dump@81ca0000 { - reg = <0x0 0x81ca0000 0x0 0x40000>; - no-map; - }; - - tme_log_mem: tme-log@81ce0000 { - reg = <0x0 0x81ce0000 0x0 0x4000>; - no-map; - }; - - uefi_log_mem: uefi-log@81ce4000 { - reg = <0x0 0x81ce4000 0x0 0x10000>; - no-map; - }; - - secdata_apss_mem: secdata-apss@81cff000 { - reg = <0x0 0x81cff000 0x0 0x1000>; - no-map; - }; - - pdp_ns_shared_mem: pdp-ns-shared@81e00000 { - reg = <0x0 0x81e00000 0x0 0x100000>; - no-map; - }; - - gpu_prr_mem: gpu-prr@81f00000 { - reg = <0x0 0x81f00000 0x0 0x10000>; - no-map; - }; - - tpm_control_mem: tpm-control@81f10000 { - reg = <0x0 0x81f10000 0x0 0x10000>; - no-map; - }; - - usb_ucsi_shared_mem: usb-ucsi-shared@81f20000 { - reg = <0x0 0x81f20000 0x0 0x10000>; - no-map; - }; - - pld_pep_mem: pld-pep@81f30000 { - reg = <0x0 0x81f30000 0x0 0x6000>; - no-map; - }; - - pld_gmu_mem: pld-gmu@81f36000 { - reg = <0x0 0x81f36000 0x0 0x1000>; - no-map; - }; - - pld_pdp_mem: pld-pdp@81f37000 { - reg = <0x0 0x81f37000 0x0 0x1000>; - no-map; - }; - - tz_stat_mem: tz-stat@82700000 { - reg = <0x0 0x82700000 0x0 0x100000>; - no-map; - }; - - xbl_tmp_buffer_mem: xbl-tmp-buffer@82800000 { - reg = <0x0 0x82800000 0x0 0xc00000>; - no-map; - }; - - adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap@84b00000 { - reg = <0x0 0x84b00000 0x0 0x800000>; - no-map; - }; - - spu_secure_shared_memory_mem: spu-secure-shared-memory@85300000 { - reg = <0x0 0x85300000 0x0 0x80000>; - no-map; - }; - - adsp_boot_dtb_mem: adsp-boot-dtb@866c0000 { - reg = <0x0 0x866c0000 0x0 0x40000>; - no-map; - }; - - spss_region_mem: spss-region@86700000 { - reg = <0x0 0x86700000 0x0 0x400000>; - no-map; - }; - - adsp_boot_mem: adsp-boot@86b00000 { - reg = <0x0 0x86b00000 0x0 0xc00000>; - no-map; - }; - - video_mem: video@87700000 { - reg = <0x0 0x87700000 0x0 0x700000>; - no-map; - }; - - adspslpi_mem: adspslpi@87e00000 { - reg = <0x0 0x87e00000 0x0 0x3a00000>; - no-map; - }; - - q6_adsp_dtb_mem: q6-adsp-dtb@8b800000 { - reg = <0x0 0x8b800000 0x0 0x80000>; - no-map; - }; - - cdsp_mem: cdsp@8b900000 { - reg = <0x0 0x8b900000 0x0 0x2000000>; - no-map; - }; - - q6_cdsp_dtb_mem: q6-cdsp-dtb@8d900000 { - reg = <0x0 0x8d900000 0x0 0x80000>; - no-map; - }; - - gpu_microcode_mem: gpu-microcode@8d9fe000 { - reg = <0x0 0x8d9fe000 0x0 0x2000>; - no-map; - }; - - cvp_mem: cvp@8da00000 { - reg = <0x0 0x8da00000 0x0 0x700000>; - no-map; - }; - - camera_mem: camera@8e100000 { - reg = <0x0 0x8e100000 0x0 0x800000>; - no-map; - }; - - av1_encoder_mem: av1-encoder@8e900000 { - reg = <0x0 0x8e900000 0x0 0x700000>; - no-map; - }; - - reserved-region@8f000000 { - reg = <0x0 0x8f000000 0x0 0xa00000>; - no-map; - }; - - wpss_mem: wpss@8fa00000 { - reg = <0x0 0x8fa00000 0x0 0x1900000>; - no-map; - }; - - q6_wpss_dtb_mem: q6-wpss-dtb@91300000 { - reg = <0x0 0x91300000 0x0 0x80000>; - no-map; - }; - - xbl_sc_mem: xbl-sc@d8000000 { - reg = <0x0 0xd8000000 0x0 0x40000>; - no-map; - }; - - reserved-region@d8040000 { - reg = <0x0 0xd8040000 0x0 0xa0000>; - no-map; - }; - - qtee_mem: qtee@d80e0000 { - reg = <0x0 0xd80e0000 0x0 0x520000>; - no-map; - }; - - ta_mem: ta@d8600000 { - reg = <0x0 0xd8600000 0x0 0x8a00000>; - no-map; - }; - - tags_mem1: tags@e1000000 { - reg = <0x0 0xe1000000 0x0 0x26a0000>; - no-map; - }; - - llcc_lpi_mem: llcc-lpi@ff800000 { - reg = <0x0 0xff800000 0x0 0x600000>; - no-map; - }; - - smem_mem: smem@ffe00000 { - compatible = "qcom,smem"; - reg = <0x0 0xffe00000 0x0 0x200000>; - hwlocks = <&tcsr_mutex 3>; - no-map; - }; - }; - - qup_opp_table_100mhz: opp-table-qup100mhz { - compatible = "operating-points-v2"; - - opp-75000000 { - opp-hz = /bits/ 64 <75000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-100000000 { - opp-hz = /bits/ 64 <100000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - }; - - qup_opp_table_120mhz: opp-table-qup120mhz { - compatible = "operating-points-v2"; - - opp-75000000 { - opp-hz = /bits/ 64 <75000000>; - required-opps = <&rpmhpd_opp_low_svs>; - }; - - opp-120000000 { - opp-hz = /bits/ 64 <120000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - }; - - smp2p-adsp { - compatible = "qcom,smp2p"; - - interrupts-extended = <&ipcc IPCC_CLIENT_LPASS - IPCC_MPROC_SIGNAL_SMP2P - IRQ_TYPE_EDGE_RISING>; - - mboxes = <&ipcc IPCC_CLIENT_LPASS - IPCC_MPROC_SIGNAL_SMP2P>; - - qcom,smem = <443>, <429>; - qcom,local-pid = <0>; - qcom,remote-pid = <2>; - - smp2p_adsp_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; - - smp2p_adsp_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - smp2p-cdsp { - compatible = "qcom,smp2p"; - - interrupts-extended = <&ipcc IPCC_CLIENT_CDSP - IPCC_MPROC_SIGNAL_SMP2P - IRQ_TYPE_EDGE_RISING>; - - mboxes = <&ipcc IPCC_CLIENT_CDSP - IPCC_MPROC_SIGNAL_SMP2P>; - - qcom,smem = <94>, <432>; - qcom,local-pid = <0>; - qcom,remote-pid = <5>; - - smp2p_cdsp_out: master-kernel { - qcom,entry-name = "master-kernel"; - #qcom,smem-state-cells = <1>; - }; - - smp2p_cdsp_in: slave-kernel { - qcom,entry-name = "slave-kernel"; - interrupt-controller; - #interrupt-cells = <2>; - }; - }; - - soc: soc@0 { - compatible = "simple-bus"; - - #address-cells = <2>; - #size-cells = <2>; - dma-ranges = <0 0 0 0 0x10 0>; - ranges = <0 0 0 0 0x10 0>; - - gcc: clock-controller@100000 { - compatible = "qcom,x1e80100-gcc"; - reg = <0 0x00100000 0 0x200000>; - - clocks = <&bi_tcxo_div2>, - <&sleep_clk>, - <&pcie3_phy>, - <&pcie4_phy>, - <&pcie5_phy>, - <&pcie6a_phy>, - <0>, - <&usb_1_ss0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, - <&usb_1_ss1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, - <&usb_1_ss2_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; - - power-domains = <&rpmhpd RPMHPD_CX>; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - }; - - ipcc: mailbox@408000 { - compatible = "qcom,x1e80100-ipcc", "qcom,ipcc"; - reg = <0 0x00408000 0 0x1000>; - - interrupts = ; - interrupt-controller; - #interrupt-cells = <3>; - - #mbox-cells = <2>; - }; - - gpi_dma2: dma-controller@800000 { - compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma"; - reg = <0 0x00800000 0 0x60000>; - - interrupts = , - , - , - , - , - , - , - , - , - , - , - ; - - dma-channels = <12>; - dma-channel-mask = <0x3e>; - #dma-cells = <3>; - - iommus = <&apps_smmu 0x436 0x0>; - - status = "disabled"; - }; - - qupv3_2: geniqup@8c0000 { - compatible = "qcom,geni-se-qup"; - reg = <0 0x008c0000 0 0x2000>; - - clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, - <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; - clock-names = "m-ahb", - "s-ahb"; - - iommus = <&apps_smmu 0x423 0x0>; - - #address-cells = <2>; - #size-cells = <2>; - ranges; - - status = "disabled"; - - i2c16: i2c@880000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00880000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - - dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, - <&gpi_dma2 1 0 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_i2c16_data_clk>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - spi16: spi@880000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00880000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table_120mhz>; - - dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, - <&gpi_dma2 1 0 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - i2c17: i2c@884000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00884000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - - dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, - <&gpi_dma2 1 1 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_i2c17_data_clk>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - spi17: spi@884000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00884000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table_120mhz>; - - dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, - <&gpi_dma2 1 1 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - i2c18: i2c@888000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00888000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - - dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, - <&gpi_dma2 1 2 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_i2c18_data_clk>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - spi18: spi@888000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00888000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table_100mhz>; - - dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, - <&gpi_dma2 1 2 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - i2c19: i2c@88c000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x0088c000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - - dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, - <&gpi_dma2 1 3 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_i2c19_data_clk>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - spi19: spi@88c000 { - compatible = "qcom,geni-spi"; - reg = <0 0x0088c000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table_100mhz>; - - dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, - <&gpi_dma2 1 3 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - i2c20: i2c@890000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00890000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - - dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, - <&gpi_dma2 1 4 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_i2c20_data_clk>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - spi20: spi@890000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00890000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table_100mhz>; - - dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, - <&gpi_dma2 1 4 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - i2c21: i2c@894000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00894000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - - dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, - <&gpi_dma2 1 5 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_i2c21_data_clk>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - spi21: spi@894000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00894000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table_100mhz>; - - dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, - <&gpi_dma2 1 5 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - uart21: serial@894000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00894000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>; - interconnect-names = "qup-core", - "qup-config"; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table_100mhz>; - - pinctrl-0 = <&qup_uart21_default>; - pinctrl-names = "default"; - - status = "disabled"; - }; - - i2c22: i2c@898000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00898000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - - dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>, - <&gpi_dma2 1 6 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_i2c22_data_clk>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - spi22: spi@898000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00898000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table_100mhz>; - - dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>, - <&gpi_dma2 1 6 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_spi22_data_clk>, <&qup_spi22_cs>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - i2c23: i2c@89c000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x0089c000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - - dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>, - <&gpi_dma2 1 7 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_i2c23_data_clk>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - spi23: spi@89c000 { - compatible = "qcom,geni-spi"; - reg = <0 0x0089c000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table_100mhz>; - - dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>, - <&gpi_dma2 1 7 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_spi23_data_clk>, <&qup_spi23_cs>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - }; - - gpi_dma1: dma-controller@a00000 { - compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma"; - reg = <0 0x00a00000 0 0x60000>; - - interrupts = , - , - , - , - , - , - , - , - , - , - , - ; - - dma-channels = <12>; - dma-channel-mask = <0x3e>; - #dma-cells = <3>; - - iommus = <&apps_smmu 0x136 0x0>; - - status = "disabled"; - }; - - qupv3_1: geniqup@ac0000 { - compatible = "qcom,geni-se-qup"; - reg = <0 0x00ac0000 0 0x2000>; - - clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, - <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; - clock-names = "m-ahb", - "s-ahb"; - - iommus = <&apps_smmu 0x123 0x0>; - - #address-cells = <2>; - #size-cells = <2>; - ranges; - - status = "disabled"; - - i2c8: i2c@a80000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a80000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - - dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, - <&gpi_dma1 1 0 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_i2c8_data_clk>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - spi8: spi@a80000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a80000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table_120mhz>; - - dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, - <&gpi_dma1 1 0 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - i2c9: i2c@a84000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a84000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - - dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, - <&gpi_dma1 1 1 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_i2c9_data_clk>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - spi9: spi@a84000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a84000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table_120mhz>; - - dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, - <&gpi_dma1 1 1 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - i2c10: i2c@a88000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a88000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - - dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, - <&gpi_dma1 1 2 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_i2c10_data_clk>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - spi10: spi@a88000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a88000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table_100mhz>; - - dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, - <&gpi_dma1 1 2 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - i2c11: i2c@a8c000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a8c000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - - dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, - <&gpi_dma1 1 3 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_i2c11_data_clk>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - spi11: spi@a8c000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a8c000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table_100mhz>; - - dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, - <&gpi_dma1 1 3 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - i2c12: i2c@a90000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a90000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - - dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, - <&gpi_dma1 1 4 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_i2c12_data_clk>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - spi12: spi@a90000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a90000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table_100mhz>; - - dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, - <&gpi_dma1 1 4 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - i2c13: i2c@a94000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a94000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - - dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, - <&gpi_dma1 1 5 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_i2c13_data_clk>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - spi13: spi@a94000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a94000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table_100mhz>; - - dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, - <&gpi_dma1 1 5 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - i2c14: i2c@a98000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a98000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - - dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, - <&gpi_dma1 1 6 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_i2c14_data_clk>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - spi14: spi@a98000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a98000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table_100mhz>; - - dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, - <&gpi_dma1 1 6 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - uart14: serial@a98000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00a98000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>; - interconnect-names = "qup-core", - "qup-config"; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table_100mhz>; - - pinctrl-0 = <&qup_uart14_default>; - pinctrl-names = "default"; - - status = "disabled"; - }; - - i2c15: i2c@a9c000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00a9c000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - - dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, - <&gpi_dma1 1 7 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_i2c15_data_clk>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - spi15: spi@a9c000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00a9c000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table_100mhz>; - - dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>, - <&gpi_dma1 1 7 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - }; - - gpi_dma0: dma-controller@b00000 { - compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma"; - reg = <0 0x00b00000 0 0x60000>; - - interrupts = , - , - , - , - , - , - , - , - , - , - , - ; - - dma-channels = <12>; - dma-channel-mask = <0x3e>; - #dma-cells = <3>; - - iommus = <&apps_smmu 0x456 0x0>; - - status = "disabled"; - }; - - qupv3_0: geniqup@bc0000 { - compatible = "qcom,geni-se-qup"; - reg = <0 0x00bc0000 0 0x2000>; - - clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, - <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; - clock-names = "m-ahb", - "s-ahb"; - - iommus = <&apps_smmu 0x443 0x0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - status = "disabled"; - - i2c0: i2c@b80000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00b80000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - - dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, - <&gpi_dma0 1 0 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_i2c0_data_clk>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - spi0: spi@b80000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00b80000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table_120mhz>; - - dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, - <&gpi_dma0 1 0 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - i2c1: i2c@b84000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00b84000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - - dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, - <&gpi_dma0 1 1 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_i2c1_data_clk>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - spi1: spi@b84000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00b84000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table_120mhz>; - - dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, - <&gpi_dma0 1 1 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - i2c2: i2c@b88000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00b88000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - - dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, - <&gpi_dma0 1 2 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_i2c2_data_clk>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - uart2: serial@b88000 { - compatible = "qcom,geni-uart"; - reg = <0 0x00b88000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>; - interconnect-names = "qup-core", - "qup-config"; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table_100mhz>; - - pinctrl-0 = <&qup_uart2_default>; - pinctrl-names = "default"; - - status = "disabled"; - }; - - spi2: spi@b88000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00b88000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table_100mhz>; - - dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, - <&gpi_dma0 1 2 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - i2c3: i2c@b8c000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00b8c000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - - dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, - <&gpi_dma0 1 3 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_i2c3_data_clk>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - spi3: spi@b8c000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00b8c000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table_100mhz>; - - dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, - <&gpi_dma0 1 3 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - i2c4: i2c@b90000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00b90000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - - dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, - <&gpi_dma0 1 4 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_i2c4_data_clk>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - spi4: spi@b90000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00b90000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table_100mhz>; - - dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, - <&gpi_dma0 1 4 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - i2c5: i2c@b94000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00b94000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - - dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, - <&gpi_dma0 1 5 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_i2c5_data_clk>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - spi5: spi@b94000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00b94000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table_100mhz>; - - dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, - <&gpi_dma0 1 5 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - i2c6: i2c@b98000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00b98000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - - dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, - <&gpi_dma0 1 6 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_i2c6_data_clk>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - spi6: spi@b98000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00b98000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table_100mhz>; - - dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, - <&gpi_dma0 1 6 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - i2c7: i2c@b9c000 { - compatible = "qcom,geni-i2c"; - reg = <0 0x00b9c000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - required-opps = <&rpmhpd_opp_low_svs>; - - dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, - <&gpi_dma0 1 7 QCOM_GPI_I2C>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_i2c7_data_clk>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - - spi7: spi@b9c000 { - compatible = "qcom,geni-spi"; - reg = <0 0x00b9c000 0 0x4000>; - - interrupts = ; - - clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; - clock-names = "se"; - - interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS - &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, - <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY - &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ACTIVE_ONLY>, - <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - interconnect-names = "qup-core", - "qup-config", - "qup-memory"; - - power-domains = <&rpmhpd RPMHPD_CX>; - operating-points-v2 = <&qup_opp_table_100mhz>; - - dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, - <&gpi_dma0 1 7 QCOM_GPI_SPI>; - dma-names = "tx", - "rx"; - - pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - status = "disabled"; - }; - }; - - tsens0: thermal-sensor@c271000 { - compatible = "qcom,x1e80100-tsens", "qcom,tsens-v2"; - reg = <0 0x0c271000 0 0x1000>, - <0 0x0c222000 0 0x1000>; - - interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>, - <