Path: cdrom.com!barrnet.net!parc!biosci!agate!msuinfo!harbinger.cc.monash.edu.au!merlin!mel.dit.csiro.au!its.csiro.au!dmssyd.syd.dms.CSIRO.AU!metro!wabbit.cc.uow.edu.au!picasso.cssc-syd.tansu.com.au!muse.emsc.telstra.com.au!muse!steves
From: steves@muse.emsc.telstra.com.au (Steve Smith)
Newsgroups: alt.cd-rom
Subject: Adaptec 1542B working (NOT) with Phillips LM 130
Date: 5 May 1994 11:24:08 +1000
Organization: Telecom Australia
Lines: 20
Message-ID: <steves.768100977@muse>
NNTP-Posting-Host: muse
Keywords: CD Adaptec Phillips


 I need assistance getting a Phillips LM 130 to work under DOS with an Adaptec
 1542B SCSI Interface card.

 For some reason the Adaptec Driver reports there are no SCSI devices on the
 BUS even though the install program from Adaptec quite happily reports the CD
 ROM is of type LM 130 when I install the drivers.

 Although this will not work under DOS, CD and Interface work quite OK with
 Linux. This leads me to believe that the problem here is with the Adaptec
 driver only, not any real incompatibilities between interface and CD.

 There may be other non-Adaptec drivers that will work quite happily with this
 hardware, but I have no idea where I could find them.

 Any help or suggestions here would be most welcome.

 Thank you in advance,
				 Steve Smith ....