5. Kea Configuration
Kea uses JSON structures to represent server configurations. The following sections describe how the configuration structures are organized.
5.1. JSON Configuration
JSON is the notation used throughout the Kea project. The most obvious usage is for the configuration file, but JSON is also used for sending commands over the Management API (see Management API) and for communicating between DHCP servers and the DDNS update daemon.
Typical usage assumes that the servers are started from the command
line, either directly or using a script, e.g. keactrl. The
configuration file is specified upon startup using the -c parameter.
5.1.1. JSON Syntax
Configuration files for the DHCPv4, DHCPv6, DDNS, Control Agent, and NETCONF modules are defined in an extended JSON format. Basic JSON is defined in RFC 7159 and ECMA 404. In particular, the only boolean values allowed are true or false (all lowercase). The capitalized versions (True or False) are not accepted.
Even though the JSON standard (ECMA 404) does not require JSON objects (i.e. name/value maps) to have unique entries, Kea implements them using a C++ STL map with unique entries. Therefore, if there are multiple values for the same name in an object/map, the last value overwrites previous values. Since Kea 1.9.0, configuration file parsers raise a syntax error in such cases.
Kea components use extended JSON with additional features allowed:
Shell comments: any text after the hash (#) character is ignored.
C comments: any text after the double slashes (//) character is ignored.
Multiline comments: any text between /* and */ is ignored. This comment can span multiple lines.
File inclusion: JSON files can include other JSON files by using a statement of the form <?include "file.json"?>.
Extra commas: to remove the inconvenience of errors caused by leftover commas after making changes to configuration. While parsing, a warning is printed with the location of the comma to give the user the ability to correct a potential mistake.
Warning
These features are meant to be used in a JSON configuration file. Their usage in any other way may result in errors.
The configuration file consists of a single object (often colloquially called a map) started with a curly bracket. It comprises only one of the "Dhcp4", "Dhcp6", "DhcpDdns", "Control-agent", or "Netconf" objects. It is possible to define additional elements but they will be ignored.
A very simple configuration for DHCPv4 could look like this:
# The whole configuration starts here.
{
# DHCPv4 specific configuration starts here.
"Dhcp4": {
"interfaces-config": {
"interfaces": [ "eth0" ],
"dhcp-socket-type": "raw"
},
"valid-lifetime": 4000,
"renew-timer": 1000,
"rebind-timer": 2000,
"subnet4": [{
"pools": [ { "pool": "192.0.2.1-192.0.2.200" } ],
"subnet": "192.0.2.0/24",
"id": 1
}],
# Now loggers are inside the DHCPv4 object.
"loggers": [{
"name": "*",
"severity": "DEBUG"
}]
}
# The whole configuration structure ends here.
}
More examples are available in the installed share/doc/kea/examples
directory.
To avoid repetition of mostly similar structures, examples in the rest of this guide will showcase only the subset of parameters appropriate for a given context. For example, when discussing the IPv6 subnets configuration in DHCPv6, only subnet6 parameters will be mentioned. It is implied that the remaining elements (the global map that holds Dhcp6) are present, but they are omitted for clarity. Usually, locations where extra parameters may appear are denoted by an ellipsis (...).
5.1.3. Simplified Notation
It is sometimes convenient to refer to a specific element in the configuration hierarchy. Each hierarchy level is separated by a slash. If there is an array, a specific instance within that array is referenced by a number in square brackets (with numbering starting at zero). For example, in the above configuration the valid-lifetime in the Dhcp4 component can be referred to as Dhcp4/valid-lifetime, and the pool in the first subnet defined in the DHCPv4 configuration as Dhcp4/subnet4[0]/pool.
5.2. Kea Configuration Backend
5.2.1. Applicability
Kea Configuration Backend (CB or config backend) gives Kea servers the ability
to manage and fetch their configuration from one or more databases. In
this documentation, the term "Configuration Backend" may also refer to
the particular Kea module providing support to manage and fetch the
configuration information from the particular database type. For
example, the MySQL Configuration Backend is the logic implemented within
libdhcp_mysql_cb.so, which provides a complete set of functions to
manage and fetch the configuration information from the MySQL database.
The PostgreSQL Configuration Backend is the logic implemented within
libdhcp_pgsql_cb.so, which provides a complete set of functions to
manage and fetch the configuration information from the PostgreSQL database.
From herein, the term "database" is used to refer to either a MySQL or
PostgreSQL database.
In small deployments, e.g. those comprising a single DHCP server instance with limited and infrequently changing number of subnets, it may be impractical to use the CB as a configuration repository because it requires additional third-party software to be installed and configured - in particular the database server, client and libraries. Once the number of DHCP servers and/or the number of managed subnets in the network grows, the usefulness of the CB becomes obvious.
One use case for the CB is a pair of Kea DHCP servers that are configured
to support High Availability as described in
libdhcp_ha.so: High Availability Outage Resilience for Kea Servers. The configurations of both servers
(including the value of the server-tag parameter)
are almost exactly the same: they may differ by the server identifier
and designation of the server as a primary or standby (or secondary), and/or
by their interfaces' configuration. Typically, the
subnets, shared networks, option definitions, and global parameters are the
same for both servers and can be sourced from a single database instance
to both Kea servers.
Using the database as a single source of configuration for subnets and/or other configuration information supported by the CB has the advantage that any modifications to the configuration in the database are automatically applied to both servers.
Another case when the centralized configuration repository is useful is in deployments including a large number of DHCP servers, possibly using a common lease database to provide redundancy. New servers can be added to the pool frequently to fulfill growing scalability requirements. Adding a new server does not require replicating the entire configuration to the new server when a common database is used.
Using the database as a configuration repository for Kea servers also brings other benefits, such as:
the ability to use database specific tools to access the configuration information;
the ability to create customized statistics based on the information stored in the database; and
the ability to backup the configuration information using the database's built-in replication mechanisms.
5.2.2. CB Capabilities and Limitations
Currently, the Kea CB has the following limitations:
It is only supported for MySQL and PostgreSQL databases.
It is only supported for the DHCPv4 and DHCPv6 daemons; the Control Agent, D2 daemon, and the NETCONF daemon cannot be configured from the database,
Only certain DHCP configuration parameters can be set in the database: global parameters, option definitions, global options, client classes, shared networks, and subnets. Other configuration parameters must be sourced from a JSON configuration file.
Kea CB stores data in a schema that is public. It is possible to
insert configuration data into the tables manually or automatically
using SQL scripts, but this requires SQL and schema knowledge.
The supported method for managing the data is through libdhcp_cb_cmds.so,
which provides management commands for config backends. It simplifies many
typical operations, such as listing, adding, retrieving, and deleting global
parameters, shared networks, subnets, pools, options, option definitions, and
client classes. In addition, it provides essential business logic that ensures
the logical integrity of the data. See commands starting with remote- in
Appendix A of this manual for a complete list.
Note
libdhcp_cb_cmds.so is available only to ISC customers with
a paid support contract. For more information on subscription options, please
complete the form at https://www.isc.org/contact.
The schema creation scripts can be found at dhcpdb_create.mysql and ; dhcpdb_create.pgsql and ; other related design documents are stored in our GitLab: CB Design and Client Classes in CB Design.
We strongly recommend against duplication of configuration information in both the file and the database. For example, when specifying subnets for the DHCP server, please store them in either the configuration backend or in the configuration file, not both. Storing some subnets in the database and others in the file may put users at risk of potential configuration conflicts. Note that the configuration instructions from the database take precedence over instructions from the file, so parts of the configuration specified in the file may be overridden if contradicted by information in the database.
Although it is not recommended, it is possible to specify certain parameter types both in a configuration file and the database. For example, a subnet can be specified in the configuration file and another subnet in the database; in this case, the server will use both subnets. DHCP client classes, however, must not be specified in both the configuration file and the database, even if they do not overlap. If any client classes are specified in the database for a particular DHCP server, this server will use these classes and ignore all classes present in its configuration file. This behavior was introduced to ensure that the server receives a consistent set of client classes specified in an expected order with all inter-class dependencies fulfilled. It is impossible to guarantee consistency when client classes are specified in two independent configuration sources.
Note
It is recommended that libdhcp_subnet_cmds.so not be used to
manage subnets when the configuration backend is used as a source
of information about the subnets. libdhcp_subnet_cmds.so
modifies the local subnets configuration in the server's memory,
not in the database. Use libdhcp_cb_cmds.so to manage the
subnets information in the database instead.
Note
Using custom option formats requires creating definitions for these options. Suppose a user wishes to set option data in the configuration backend. In that case, we recommend specifying the definition for that option in the configuration backend as well. It is essential when multiple servers are managed via the configuration backend, and may differ in their configurations. The option data parser can search for an option definition appropriate for the server for which the option data is specified.
In a single-server deployment, or when all servers share the same configuration file information, it is possible to specify option definitions in the configuration files and option data in the configuration backend. The server receiving a command to set option data must have a valid definition in its configuration file, even when it sets option data for another server.
It is not supported to specify option definitions in the configuration backend and the corresponding option data in the server configuration files.
5.2.3. CB Components
To use a MySQL configuration backend you must compile
libdhcp_mysql_cb.so and configure the DHCP servers to load it.
It is compiled when the --with-mysql configuration switch is used during the Kea build.
The MySQL C client libraries must be installed, as explained in DHCP Database Installation and Configuration.
To use a PostgreSQL configuration backend you must compile libdhcp_pgsql_cb.so
and configure the DHCP servers to load it. It is compiled when
the --with-pgsql configuration switch is used during the Kea build. The PostgreSQL
C client libraries must be installed, as explained in DHCP Database Installation and Configuration.
Note
An existing database schema must be upgraded to the latest schema
required by the particular Kea version using the kea-admin tool,
as described in The kea-admin Tool.
libdhcp_cb_cmds.so provides a complete set of commands to manage the
servers' configuration information within the database. This library can
be attached to both DHCPv4 and DHCPv6 server instances. While it is
possible to manage the configuration information without libdhcp_cb_cmds.so
with commonly available tools, such as MySQL Workbench or
the command-line MySQL client, or by directly working with the database;
these avenues are neither recommended nor supported.
The DHCPv4 and DHCPv6 server-specific configurations of the CB, as well as the list of supported configuration parameters, can be found in Configuration Backend in DHCPv4 and Configuration Backend in DHCPv6, respectively.
5.2.5. Configuration Files Inclusion
The parser provides the ability to include files. The syntax was chosen to look similar to how Apache includes PHP scripts in HTML code. This particular syntax was chosen to emphasize that the include directive is an additional feature and not a part of JSON syntax.
The inclusion is implemented as a stack of files. You can use the include directive in nested includes. Up to ten nesting levels are supported. This arbitrarily chosen limit is protection against recursive inclusions.
The include directive has the form:
<?include "[PATH]"?>
The [PATH] pattern should be replaced with an absolute path or a path relative to the current working directory at the time the Kea process was launched.
To include one file from another, use the following syntax:
{
"Dhcp6": {
"interfaces-config": {
"interfaces": [ "*" ]},
"preferred-lifetime": 3000,
"rebind-timer": 2000,
"renew-timer": 1000,
<?include "subnets.json"?>
"valid-lifetime": 4000
}
}
where the content of "subnets.json" may be:
{
"subnet4": [
{
"id": 123,
"subnet": "192.0.2.0/24"
},
{
"id": 234,
"subnet": "192.0.3.0/24"
},
{
"id": 345,
"subnet": "10.0.0.0/8"
}
],
...
}
5.1.2. Comments and User Context
Shell, C, or C++ style comments are all permitted in the JSON configuration file if the file is used locally. This is convenient and works in simple cases where the configuration is kept statically using a local file. However, since comments are not part of JSON syntax, most JSON tools detect them as errors. Another problem with them is that once Kea loads its configuration, the shell, C, and C++ style comments are ignored. If commands such as
config-getorconfig-writeare used, those comments are lost. An example of such comments was presented in the previous section.Historically, to address the problem, Kea code allowed the use of comment strings as valid JSON entities. This had the benefit of being retained through various operations (such as
config-get), or allowing processing by JSON tools. An example JSON comment looks like this:However, the facts that the comment could only be a single line, and that it was not possible to add any other information in a more structured form, were frustrating. One specific example was a request to add floor levels and building numbers to subnets. This was one of the reasons why the concept of user context was introduced. It allows adding an arbitrary JSON structure to most Kea configuration structures.
This has a number of benefits compared to earlier approaches. First, it is fully compatible with JSON tools and Kea commands. Second, it allows storing simple comment strings, but it can also store much more complex data, such as multiple lines (as a string array), extra typed data (such as floor numbers being actual numbers), and more. Third, the data is exposed to hooks, so it is possible to develop third-party hooks that take advantage of that extra information. An example user context looks like this:
User contexts can store an arbitrary data file as long as it has valid JSON syntax and its top-level element is a map (i.e. the data must be enclosed in curly brackets). However, some hook libraries may expect specific formatting; please consult the specific hook library documentation for details.
In a sense the user-context mechanism has superseded the JSON comment capabilities; ISC encourages administrators to use user-context instead of the older mechanisms. To promote this way of storing comments, Kea compared converts JSON comments to user-context on the fly.
However, if the configuration uses the old JSON comment, the
config-getcommand returns a slightly modified configuration. It is not uncommon for a call forconfig-setfollowed by aconfig-getto receive a slightly different structure. The best way to avoid this problem is simply to abandon JSON comments and use user-context.Kea supports user contexts at the following levels: global scope, interfaces configuration, shared networks, subnets, client classes, option data and definitions, host reservations, control socket, DHCP-DDNS, loggers, leases, and server ID. These are supported in both DHCPv4 and DHCPv6, with the exception of server ID, which is DHCPv6 only.
User context can be added and edited in structures supported by commands.
We encourage Kea users to utilize these functions to store information used by other systems and custom hooks.
For example, the
subnet4-updatecommand can be used to add user context data to an existing subnet.The same can be done with many other commands, like
lease6-add, etc.Kea also uses user context to store non-standard data. Currently, only Storing Extended Lease Information uses this feature.
When enabled, it adds the ISC key in
user-contextto differentiate automatically added content.Example of relay information stored in a lease:
User context can store configuration for multiple hooks and comments at once.
For a discussion about user context used in hooks, see User Contexts in Hooks.