This is features.info, produced by makeinfo version 4.0 from
features.texi.

INFO-DIR-SECTION Shells
START-INFO-DIR-ENTRY
* Bash: (bash).                 GNU Bourne-Again SHell.
END-INFO-DIR-ENTRY

This text is a brief description of the features that are present in
the Bash shell.

This is Edition 1.14, last updated 4 August 1994,
of `The GNU Bash Features Guide',
for `Bash', Version 1.14.

Copyright (C) 1991, 1993 Free Software Foundation, Inc.

This file is part of GNU Bash, the Bourne Again SHell.

Bash is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 1, or (at your option)
any later version.

Bash is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
License for more details.

You should have received a copy of the GNU General Public License
along with Bash; see the file COPYING.  If not, write to the Free
Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.


File: features.info,  Node: Top,  Next: Bourne Shell Features,  Up: (dir)

Bash Features
*************

   Bash contains features that appear in other popular shells, and some
features that only appear in Bash.  Some of the shells that Bash has
borrowed concepts from are the Bourne Shell (`sh'), the Korn Shell
(`ksh'), and the C-shell (`csh' and its successor, `tcsh'). The
following menu breaks the features up into categories based upon which
one of these other shells inspired the feature.

   This manual is meant as a brief introduction to features found in
Bash.  The Bash manual page should be used as the definitive reference
on shell behavior.

* Menu:

* Bourne Shell Features::	Features originally found in the
				Bourne shell.

* Csh Features::		Features originally found in the
				Berkeley C-Shell.

* Korn Shell Features::		Features originally found in the Korn
				Shell.

* Bash Specific Features::	Features found only in Bash.

* Job Control::			A chapter describing what job control is
				and how bash allows you to use it.

* Using History Interactively::	Chapter dealing with history expansion
				rules.

* Command Line Editing::	Chapter describing the command line
				editing features.

* Variable Index::		Quick reference helps you find the
				variable you want.

* Concept Index::		General index for this manual.


File: features.info,  Node: Bourne Shell Features,  Next: Csh Features,  Prev: Top,  Up: Top

Bourne Shell Style Features
***************************

   Bash is an acronym for Bourne Again SHell.  The Bourne shell is the
traditional Unix shell originally written by Stephen Bourne.  All of
the Bourne shell builtin commands are available in Bash, and the rules
for evaluation and quoting are taken from the Posix 1003.2
specification for the `standard' Unix shell.

   This section briefly summarizes things which Bash inherits from the
Bourne shell: shell control structures, builtins, variables, and other
features.  It also lists the significant differences between Bash and
the Bourne Shell.

* Menu:

* Looping Constructs::		Shell commands for iterative action.
* Conditional Constructs::	Shell commands for conditional execution.
* Shell Functions::		Grouping commands by name.
* Bourne Shell Builtins::	Builtin commands inherited from the Bourne
				Shell.
* Bourne Shell Variables::	Variables which Bash uses in the same way
				as the Bourne Shell.
* Other Bourne Shell Features::	Addtional aspects of Bash which behave in
				the same way as the Bourne Shell.


File: features.info,  Node: Looping Constructs,  Next: Conditional Constructs,  Up: Bourne Shell Features

Looping Constructs
==================

   Note that wherever you see a `;' in the description of a command's
syntax, it may be replaced indiscriminately with one or more newlines.

   Bash supports the following looping constructs.

`until'
     The syntax of the `until' command is:
          until TEST-COMMANDS; do CONSEQUENT-COMMANDS; done
     Execute CONSEQUENT-COMMANDS as long as the final command in
     TEST-COMMANDS has an exit status which is not zero.

`while'
     The syntax of the `while' command is:
          while TEST-COMMANDS; do CONSEQUENT-COMMANDS; done

     Execute CONSEQUENT-COMMANDS as long as the final command in
     TEST-COMMANDS has an exit status of zero.

`for'
     The syntax of the for command is:

          for NAME [in WORDS ...]; do COMMANDS; done
     Execute COMMANDS for each member in WORDS, with NAME bound to the
     current member.  If "`in WORDS'" is not present, "`in "$@"'" is
     assumed.


File: features.info,  Node: Conditional Constructs,  Next: Shell Functions,  Prev: Looping Constructs,  Up: Bourne Shell Features

Conditional Constructs
======================

`if'
     The syntax of the `if' command is:

          if TEST-COMMANDS; then
            CONSEQUENT-COMMANDS;
          [elif MORE-TEST-COMMANDS; then
            MORE-CONSEQUENTS;]
          [else ALTERNATE-CONSEQUENTS;]
          fi

     Execute CONSEQUENT-COMMANDS only if the final command in
     TEST-COMMANDS has an exit status of zero.  Otherwise, each `elif'
     list is executed in turn, and if its exit status is zero, the
     corresponding MORE-CONSEQUENTS is executed and the command
     completes.  If "`else ALTERNATE-CONSEQUENTS'" is present, and the
     final command in the final `if' or `elif' clause has a non-zero
     exit status, then execute ALTERNATE-CONSEQUENTS.

`case'
     The syntax of the `case' command is:

          `case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac'

     Selectively execute COMMANDS based upon WORD matching PATTERN.
     The ``|'' is used to separate multiple patterns.

     Here is an example using `case' in a script that could be used to
     describe an interesting feature of an animal:

          echo -n "Enter the name of an animal: "
          read ANIMAL
          echo -n "The $ANIMAL has "
          case $ANIMAL in
            horse | dog | cat) echo -n "four";;
            man | kangaroo ) echo -n "two";;
            *) echo -n "an unknown number of";;
          esac
          echo "legs."


File: features.info,  Node: Shell Functions,  Next: Bourne Shell Builtins,  Prev: Conditional Constructs,  Up: Bourne Shell Features

Shell Functions
===============

   Shell functions are a way to group commands for later execution
using a single name for the group.  They are executed just like a
"regular" command.  Shell functions are executed in the current shell
context; no new process is created to interpret them.

   Functions are declared using this syntax:

     [ `function' ] NAME () { COMMAND-LIST; }

   This defines a function named NAME.  The BODY of the function is the
COMMAND-LIST between { and }.  This list is executed whenever NAME is
specified as the name of a command.  The exit status of a function is
the exit status of the last command executed in the body.

   When a function is executed, the arguments to the function become
the positional parameters during its execution.  The special parameter
`#' that gives the number of positional parameters is updated to
reflect the change.  Positional parameter 0 is unchanged.

   If the builtin command `return' is executed in a function, the
function completes and execution resumes with the next command after
the function call.  When a function completes, the values of the
positional parameters and the special parameter `#' are restored to the
values they had prior to function execution.


File: features.info,  Node: Bourne Shell Builtins,  Next: Bourne Shell Variables,  Prev: Shell Functions,  Up: Bourne Shell Features

Bourne Shell Builtins
=====================

   The following shell builtin commands are inherited from the Bourne
shell.  These commands are implemented as specified by the Posix 1003.2
standard.

`:'
     Do nothing beyond expanding any arguments and performing
     redirections.

`.'
     Read and execute commands from the FILENAME argument in the
     current shell context.

`break'
     Exit from a `for', `while', or `until' loop.

`cd'
     Change the current working directory.

`continue'
     Resume the next iteration of an enclosing `for', `while', or
     `until' loop.

`echo'
     Print the arguments, separated by spaces, to the standard output.

`eval'
     The arguments are concatenated together into a single command,
     which is then read and executed.

`exec'
     If a COMMAND argument is supplied, it replaces the shell.  If no
     COMMAND is specified, redirections may be used to affect the
     current shell environment.

`exit'
     Exit the shell.

`export'
     Mark the arguments as variables to be passed to child processes in
     the environment.

`getopts'
     Parse options to shell scripts or functions.

`hash'
     Remember the full pathnames of commands specified as arguments, so
     they need not be searched for on subsequent invocations.

`kill'
     Send a signal to a process.

`pwd'
     Print the current working directory.

`read'
     Read a line from the shell input and use it to set the values of
     specified variables.

`readonly'
     Mark variables as unchangable.

`return'
     Cause a shell function to exit with a specified value.

`shift'
     Shift positional parameters to the left.

`test'
`['
     Evaluate a conditional expression.

`times'
     Print out the user and system times used by the shell and its
     children.

`trap'
     Specify commands to be executed when the shell receives signals.

`umask'
     Set the shell process's file creation mask.

`unset'
     Cause shell variables to disappear.

`wait'
     Wait until child processes exit and report their exit status.


File: features.info,  Node: Bourne Shell Variables,  Next: Other Bourne Shell Features,  Prev: Bourne Shell Builtins,  Up: Bourne Shell Features

Bourne Shell Variables
======================

   Bash uses certain shell variables in the same way as the Bourne
shell.  In some cases, Bash assigns a default value to the variable.

`IFS'
     A list of characters that separate fields; used when the shell
     splits words as part of expansion.

`PATH'
     A colon-separated list of directories in which the shell looks for
     commands.

`HOME'
     The current user's home directory.

`CDPATH'
     A colon-separated list of directories used as a search path for
     the `cd' command.

`MAILPATH'
     A colon-separated list of files which the shell periodically checks
     for new mail.    You can also specify what message is printed by
     separating the file name from the message with a `?'.  When used
     in the text of the message, `$_' stands for the name of the
     current mailfile.

`PS1'
     The primary prompt string.

`PS2'
     The secondary prompt string.

`OPTIND'
     The index of the last option processed by the `getopts' builtin.

`OPTARG'
     The value of the last option argument processed by the `getopts'
     builtin.


File: features.info,  Node: Other Bourne Shell Features,  Prev: Bourne Shell Variables,  Up: Bourne Shell Features

Other Bourne Shell Features
===========================

* Menu:

* Major Differences from the Bourne Shell::	Major differences between
						Bash and the Bourne shell.

   Bash implements essentially the same grammar, parameter and variable
expansion, redirection, and quoting as the Bourne Shell.  Bash uses the
Posix 1003.2 standard as the specification of how these features are to
be implemented.  There are some differences between the traditional
Bourne shell and the Posix standard; this section quickly details the
differences of significance.  A number of these differences are
explained in greater depth in subsequent sections.


File: features.info,  Node: Major Differences from the Bourne Shell,  Up: Other Bourne Shell Features

Major Differences from the Bourne Shell
---------------------------------------

   Bash implements the `!' keyword to negate the return value of a
pipeline.  Very useful when an `if' statement needs to act only if a
test fails.

   Bash includes brace expansion (*note Brace Expansion::).

   Bash includes the Posix and `ksh'-style pattern removal `%%' and
`##' constructs to remove leading or trailing substrings from variables.

   The Posix and `ksh'-style `$()' form of command substitution is
implemented, and preferred to the Bourne shell's ```' (which is also
implemented for backwards compatibility).

   Variables present in the shell's initial environment are
automatically exported to child processes.  The Bourne shell does not
normally do this unless the variables are explicitly marked using the
`export' command.

   The expansion `${#xx}', which returns the length of `$xx', is
supported.

   The `IFS' variable is used to split only the results of expansion,
not all words.  This closes a longstanding shell security hole.

   It is possible to have a variable and a function with the same name;
`sh' does not separate the two name spaces.

   Bash functions are permitted to have local variables, and thus useful
recursive functions may be written.

   The `noclobber' option is available to avoid overwriting existing
files with output redirection.

   Bash allows you to write a function to override a builtin, and
provides access to that builtin's functionality within the function via
the `builtin' and `command' builtins.

   The `command' builtin allows selective disabling of functions when
command lookup is performed.

   Individual builtins may be enabled or disabled using the `enable'
builtin.

   Functions may be exported to children via the environment.

   The Bash `read' builtin will read a line ending in <\> with the `-r'
option, and will use the `$REPLY' variable as a default if no arguments
are supplied.

   The `return' builtin may be used to abort execution of scripts
executed with the `.' or `source' builtins.

   The `umask' builtin allows symbolic mode arguments similar to those
accepted by `chmod'.

   The `test' builtin is slightly different, as it implements the Posix
1003.2 algorithm, which specifies the behavior based on the number of
arguments.


File: features.info,  Node: Csh Features,  Next: Korn Shell Features,  Prev: Bourne Shell Features,  Up: Top

C-Shell Style Features
**********************

   The C-Shell ("`csh'") was created by Bill Joy at UC Berkeley.  It is
generally considered to have better features for interactive use than
the original Bourne shell.  Some of the `csh' features present in Bash
include job control, history expansion, `protected' redirection, and
several variables for controlling the interactive behaviour of the shell
(e.g. `IGNOREEOF').

   *Note Using History Interactively:: for details on history expansion.

* Menu:

* Tilde Expansion::		Expansion of the ~ character.
* Brace Expansion::		Expansion of expressions within braces.
* C Shell Builtins::		Builtin commands adopted from the C Shell.
* C Shell Variables::		Variables which Bash uses in essentially
				the same way as the C Shell.


File: features.info,  Node: Tilde Expansion,  Next: Brace Expansion,  Up: Csh Features

Tilde Expansion
===============

   Bash has tilde (~) expansion, similar, but not identical, to that of
`csh'.  The following table shows what unquoted words beginning with a
tilde expand to.

`~'
     The current value of `$HOME'.

`~/foo'
     `$HOME/foo'

`~fred/foo'
     The subdirectory `foo' of the home directory of the user `fred'.

`~+/foo'
     `$PWD/foo'

`~-'
     `$OLDPWD/foo'

   Bash will also tilde expand words following redirection operators
and words following `=' in assignment statements.


File: features.info,  Node: Brace Expansion,  Next: C Shell Builtins,  Prev: Tilde Expansion,  Up: Csh Features

Brace Expansion
===============

   Brace expansion is a mechanism by which arbitrary strings may be
generated.  This mechanism is similar to PATHNAME EXPANSION (see the
Bash manual page for details), but the file names generated need not
exist.  Patterns to be brace expanded take the form of an optional
PREAMBLE, followed by a series of comma-separated strings between a
pair of braces, followed by an optional POSTAMBLE.  The preamble is
prepended to each string contained within the braces, and the postamble
is then appended to each resulting string, expanding left to right.

   Brace expansions may be nested.  The results of each expanded string
are not sorted; left to right order is preserved.  For example,
     a{d,c,b}e
   expands into ADE ACE ABE.

   Brace expansion is performed before any other expansions, and any
characters special to other expansions are preserved in the result.  It
is strictly textual.  Bash does not apply any syntactic interpretation
to the context of the expansion or the text between the braces.

   A correctly-formed brace expansion must contain unquoted opening and
closing braces, and at least one unquoted comma.  Any incorrectly
formed brace expansion is left unchanged.

   This construct is typically used as shorthand when the common prefix
of the strings to be generated is longer than in the above example:
     mkdir /usr/local/src/bash/{old,new,dist,bugs}
   or
     chown root /usr/{ucb/{ex,edit},lib/{ex?.?*,how_ex}}


File: features.info,  Node: C Shell Builtins,  Next: C Shell Variables,  Prev: Brace Expansion,  Up: Csh Features

C Shell Builtins
================

   Bash has several builtin commands whose definition is very similar
to `csh'.

`pushd'
          pushd [DIR | +N | -N]

     Save the current directory on a list and then `cd' to DIR.  With no
     arguments, exchanges the top two directories.

    `+N'
          Brings the Nth directory (counting from the left of the list
          printed by `dirs') to the top of the list by rotating the
          stack.

    `-N'
          Brings the Nth directory (counting from the right of the list
          printed by `dirs') to the top of the list by rotating the
          stack.

    `DIR'
          Makes the current working directory be the top of the stack,
          and then CDs to DIR.  You can see the saved directory list
          with the `dirs' command.

`popd'
          popd [+N | -N]

     Pops the directory stack, and `cd's to the new top directory.  When
     no arguments are given, removes the top directory from the stack
     and `cd's to the new top directory.  The elements are numbered
     from 0 starting at the first directory listed with `dirs'; i.e.
     `popd' is equivalent to `popd +0'.
    `+N'
          Removes the Nth directory (counting from the left of the list
          printed by `dirs'), starting with zero.

    `-N'
          Removes the Nth directory (counting from the right of the
          list printed by `dirs'), starting with zero.

`dirs'
          dirs [+N | -N] [-L]
     Display the list of currently remembered directories.  Directories
     find their way onto the list with the `pushd' command; you can get
     back up through the list with the `popd' command.
    `+N'
          Displays the Nth directory (counting from the left of the
          list printed by `dirs' when invoked without options), starting
          with zero.

    `-N'
          Displays the Nth directory (counting from the right of the
          list printed by `dirs' when invoked without options), starting
          with zero.

    `-L'
          Produces a longer listing; the default listing format uses a
          tilde to denote the home directory.

`history'
          history [N] [ [-w -r -a -n] [FILENAME]]

     Display the history list with line numbers.  Lines prefixed with
     with a `*' have been modified.  An argument of N says to list only
     the last N lines.  Option `-w' means write out the current history
     to the history file; `-r' means to read the current history file
     and make its contents the history list.  An argument of `-a' means
     to append the new history lines (history lines entered since the
     beginning of the current Bash session) to the history file.
     Finally, the `-n' argument means to read the history lines not
     already read from the history file into the current history list.
     These are lines appended to the history file since the beginning
     of the current Bash session.  If FILENAME is given, then it is used
     as the history file, else if `$HISTFILE' has a value, that is
     used, otherwise `~/.bash_history' is used.

`logout'
     Exit a login shell.

`source'
     A synonym for `.' (*note Bourne Shell Builtins::)


File: features.info,  Node: C Shell Variables,  Prev: C Shell Builtins,  Up: Csh Features

C Shell Variables
=================

`IGNOREEOF'
     If this variable is set, it represents the number of consecutive
     `EOF's Bash will read before exiting.  By default, Bash will exit
     upon reading a single `EOF'.

`cdable_vars'
     If this variable is set, Bash treats arguments to the `cd' command
     which are not directories as names of variables whose values are
     the directories to change to.


File: features.info,  Node: Korn Shell Features,  Next: Bash Specific Features,  Prev: Csh Features,  Up: Top

Korn Shell Style Features
*************************

   This section describes features primarily inspired by the Korn Shell
(`ksh').  In some cases, the Posix 1003.2 standard has adopted these
commands and variables from the Korn Shell; Bash implements those
features using the Posix standard as a guide.

* Menu:

* Korn Shell Constructs::	Shell grammar constructs adopted from the
				Korn Shell
* Korn Shell Builtins::		Builtin commands adopted from the Korn Shell.
* Korn Shell Variables::	Variables which bash uses in essentially
				the same way as the Korn Shell.
* Aliases::			Substituting one command for another.


File: features.info,  Node: Korn Shell Constructs,  Next: Korn Shell Builtins,  Up: Korn Shell Features

Korn Shell Constructs
=====================

   Bash includes the Korn Shell `select' construct.  This construct
allows the easy generation of menus.  It has almost the same syntax as
the `for' command.

   The syntax of the `select' command is:
     select NAME [in WORDS ...]; do COMMANDS; done

   The list of words following `in' is expanded, generating a list of
items.  The set of expanded words is printed on the standard error,
each preceded by a number.  If the "`in WORDS'" is omitted, the
positional parameters are printed.  The `PS3' prompt is then displayed
and a line is read from the standard input. If the line consists of the
number corresponding to one of the displayed words, then the value of
NAME is set to that word.  If the line is empty, the words and prompt
are displayed again.  If `EOF' is read, the `select' command completes.
Any other value read causes NAME to be set to null.  The line read is
saved in the variable `REPLY'.

   The COMMANDS are executed after each selection until a `break' or
`return' command is executed, at which point the `select' command
completes.


File: features.info,  Node: Korn Shell Builtins,  Next: Korn Shell Variables,  Prev: Korn Shell Constructs,  Up: Korn Shell Features

Korn Shell Builtins
===================

   This section describes Bash builtin commands taken from `ksh'.

`fc'
          `fc [-e ENAME] [-nlr] [FIRST] [LAST]'
          `fc -s [PAT=REP] [COMMAND]'

     Fix Command.  In the first form, a range of commands from FIRST to
     LAST is selected from the history list.  Both FIRST and LAST may
     be specified as a string (to locate the most recent command
     beginning with that string) or as a number (an index into the
     history list, where a negative number is used as an offset from the
     current command number).  If LAST is not specified it is set to
     FIRST.  If FIRST is not specified it is set to the previous
     command for editing and -16 for listing.  If the `-l' flag is
     given, the commands are listed on standard output.  The `-n' flag
     suppresses the command numbers when listing.  The `-r' flag
     reverses the order of the listing.  Otherwise, the editor given by
     ENAME is invoked on a file containing those commands.  If ENAME is
     not given, the value of the following variable expansion is used:
     `${FCEDIT:-${EDITOR:-vi}}'.  This says to use the value of the
     `FCEDIT' variable if set, or the value of the `EDITOR' variable if
     that is set, or `vi' if neither is set.  When editing is complete,
     the edited commands are echoed and executed.

     In the second form, COMMAND is re-executed after each instance of
     PAT in the selected command is replaced by REP.

     A useful alias to use with the `fc' command is `r='fc -s'', so
     that typing `r cc' runs the last command beginning with `cc' and
     typing `r' re-executes the last command (*note Aliases::).

`let'
     The `let' builtin allows arithmetic to be performed on shell
     variables.  For details, refer to *Note Arithmetic Builtins::.

`typeset'
     The `typeset' command is supplied for compatibility with the Korn
     shell; however, it has been made obsolete by the `declare' command
     (*note Bash Builtins::).


File: features.info,  Node: Korn Shell Variables,  Next: Aliases,  Prev: Korn Shell Builtins,  Up: Korn Shell Features

Korn Shell Variables
====================

`REPLY'
     The default variable for the `read' builtin.

`RANDOM'
     Each time this parameter is referenced, a random integer is
     generated.  Assigning a value to this variable seeds the random
     number generator.

`SECONDS'
     This variable expands to the number of seconds since the shell was
     started.  Assignment to this variable resets the count to the
     value assigned, and the expanded value becomes the value assigned
     plus the number of seconds since the assignment.

`PS3'
     The value of this variable is used as the prompt for the `select'
     command.

`PS4'
     This is the prompt printed before the command line is echoed when
     the `-x' option is set (*note The Set Builtin::).

`PWD'
     The current working directory as set by the `cd' builtin.

`OLDPWD'
     The previous working directory as set by the `cd' builtin.

`TMOUT'
     If set to a value greater than zero, the value is interpreted as
     the number of seconds to wait for input after issuing the primary
     prompt.  Bash terminates after that number of seconds if input does
     not arrive.


File: features.info,  Node: Aliases,  Prev: Korn Shell Variables,  Up: Korn Shell Features

Aliases
=======

* Menu:

* Alias Builtins::		Builtins commands to maniuplate aliases.

   The shell maintains a list of ALIASES that may be set and unset with
the `alias' and `unalias' builtin commands.

   The first word of each command, if unquoted, is checked to see if it
has an alias.  If so, that word is replaced by the text of the alias.
The alias name and the replacement text may contain any valid shell
input, including shell metacharacters, with the exception that the
alias name may not contain <=>.  The first word of the replacement text
is tested for aliases, but a word that is identical to an alias being
expanded is not expanded a second time.  This means that one may alias
`ls' to `"ls -F"', for instance, and Bash does not try to recursively
expand the replacement text. If the last character of the alias value
is a space or tab character, then the next command word following the
alias is also checked for alias expansion.

   Aliases are created and listed with the `alias' command, and removed
with the `unalias' command.

   There is no mechanism for using arguments in the replacement text,
as in `csh'.  If arguments are needed, a shell function should be used.

   Aliases are not expanded when the shell is not interactive.

   The rules concerning the definition and use of aliases are somewhat
confusing.  Bash always reads at least one complete line of input
before executing any of the commands on that line.  Aliases are
expanded when a command is read, not when it is executed.  Therefore, an
alias definition appearing on the same line as another command does not
take effect until the next line of input is read.  This means that the
commands following the alias definition on that line are not affected
by the new alias.  This behavior is also an issue when functions are
executed.  Aliases are expanded when the function definition is read,
not when the function is executed, because a function definition is
itself a compound command.  As a consequence, aliases defined in a
function are not available until after that function is executed.  To
be safe, always put alias definitions on a separate line, and do not
use `alias' in compound commands.

   Note that for almost every purpose, aliases are superseded by shell
functions.


File: features.info,  Node: Alias Builtins,  Up: Aliases

Alias Builtins
--------------

`alias'
          alias [NAME[=VALUE] ...]

     Without arguments, print the list of aliases on the standard
     output.  If arguments are supplied, an alias is defined for each
     NAME whose VALUE is given.  If no VALUE is given, the name and
     value of the alias is printed.

`unalias'
          unalias [-a] [NAME ... ]

     Remove each NAME from the list of aliases.  If `-a' is supplied,
     all aliases are removed.


File: features.info,  Node: Bash Specific Features,  Next: Job Control,  Prev: Korn Shell Features,  Up: Top

Bash Specific Features
**********************

   This section describes the features unique to Bash.

* Menu:

* Invoking Bash::		Command line options that you can give
				to Bash.
* Bash Startup Files::		When and how Bash executes scripts.
* Is This Shell Interactive?::	Determining the state of a running Bash.
* Bash Builtins::		Table of builtins specific to Bash.
* The Set Builtin::		This builtin is so overloaded it
				deserves its own section.
* Bash Variables::		List of variables that exist in Bash.
* Shell Arithmetic::		Arithmetic on shell variables.
* Printing a Prompt::		Controlling the PS1 string.


File: features.info,  Node: Invoking Bash,  Next: Bash Startup Files,  Up: Bash Specific Features

Invoking Bash
=============

   In addition to the single-character shell command-line options
(*note The Set Builtin::), there are several multi-character options
that you can use.  These options must appear on the command line before
the single-character options to be recognized.

`-norc'
     Don't read the `~/.bashrc' initialization file in an interactive
     shell.  This is on by default if the shell is invoked as `sh'.

`-rcfile FILENAME'
     Execute commands from FILENAME (instead of `~/.bashrc') in an
     interactive shell.

`-noprofile'
     Don't load the system-wide startup file `/etc/profile' or any of
     the personal initialization files `~/.bash_profile',
     `~/.bash_login', or `~/.profile' when bash is invoked as a login
     shell.

`-version'
     Display the version number of this shell.

`-login'
     Make this shell act as if it were directly invoked from login.
     This is equivalent to `exec - bash' but can be issued from another
     shell, such as `csh'.  If you wanted to replace your current login
     shell with a Bash login shell, you would say `exec bash -login'.

`-nobraceexpansion'
     Do not perform curly brace expansion (*note Brace Expansion::).

`-nolineediting'
     Do not use the GNU Readline library (*note Command Line Editing::)
     to read interactive command lines.

`-posix'
     Change the behavior of Bash where the default operation differs
     from the Posix 1003.2 standard to match the standard.  This is
     intended to make Bash behave as a strict superset of that standard.

   There are several single-character options you can give which are
not available with the `set' builtin.

`-c STRING'
     Read and execute commands from STRING after processing the
     options, then exit.

`-i'
     Force the shell to run interactively.

`-s'
     If this flag is present, or if no arguments remain after option
     processing, then commands are read from the standard input.  This
     option allows the positional parameters to be set when invoking an
     interactive shell.

   An _interactive_ shell is one whose input and output are both
connected to terminals (as determined by `isatty()'), or one started
with the `-i' option.


File: features.info,  Node: Bash Startup Files,  Next: Is This Shell Interactive?,  Prev: Invoking Bash,  Up: Bash Specific Features

Bash Startup Files
==================

   When and how Bash executes startup files.

     For Login shells (subject to the -noprofile option):
     
         On logging in:
            If `/etc/profile' exists, then source it.
     
            If `~/.bash_profile' exists, then source it,
               else if `~/.bash_login' exists, then source it,
                  else if `~/.profile' exists, then source it.
     
         On logging out:
            If `~/.bash_logout' exists, source it.
     
     For non-login interactive shells (subject to the -norc and -rcfile options):
         On starting up:
            If `~/.bashrc' exists, then source it.
     
     For non-interactive shells:
         On starting up:
            If the environment variable `ENV' is non-null, expand the
            variable and source the file named by the value.  If Bash is
            not started in Posix mode, it looks for `BASH_ENV' before
            `ENV'.

   So, typically, your `~/.bash_profile' contains the line
     `if [ -f `~/.bashrc' ]; then source `~/.bashrc'; fi'

after (or before) any login specific initializations.

   If Bash is invoked as `sh', it tries to mimic the behavior of `sh'
as closely as possible.  For a login shell, it attempts to source only
`/etc/profile' and `~/.profile', in that order.  The `-noprofile'
option may still be used to disable this behavior.  A shell invoked as
`sh' does not attempt to source any other startup files.

   When Bash is started in POSIX mode, as with the `-posix' command
line option, it follows the Posix 1003.2 standard for startup files.
In this mode, the `ENV' variable is expanded and that file sourced; no
other startup files are read.


File: features.info,  Node: Is This Shell Interactive?,  Next: Bash Builtins,  Prev: Bash Startup Files,  Up: Bash Specific Features

Is This Shell Interactive?
==========================

   You may wish to determine within a startup script whether Bash is
running interactively or not.  To do this, examine the variable `$PS1';
it is unset in non-interactive shells, and set in interactive shells.
Thus:

     if [ -z "$PS1" ]; then
     	echo This shell is not interactive
     else
     	echo This shell is interactive
     fi

   You can ask an interactive Bash to not run your `~/.bashrc' file
with the `-norc' flag.  You can change the name of the `~/.bashrc' file
to any other file name with `-rcfile FILENAME'.  You can ask Bash to
not run your `~/.bash_profile' file with the `-noprofile' flag.


File: features.info,  Node: Bash Builtins,  Next: The Set Builtin,  Prev: Is This Shell Interactive?,  Up: Bash Specific Features

Bash Builtin Commands
=====================

   This section describes builtin commands which are unique to or have
been extended in Bash.

`builtin'
          builtin [SHELL-BUILTIN [ARGS]]
     Run a shell builtin.  This is useful when you wish to rename a
     shell builtin to be a function, but need the functionality of the
     builtin within the function itself.

`bind'
          bind [-m KEYMAP] [-lvd] [-q NAME]
          bind [-m KEYMAP] -f FILENAME
          bind [-m KEYMAP] KEYSEQ:FUNCTION-NAME

     Display current Readline (*note Command Line Editing::) key and
     function bindings, or bind a key sequence to a Readline function
     or macro.  The binding syntax accepted is identical to that of
     `.inputrc' (*note Readline Init File::), but each binding must be
     passed as a separate argument: `"\C-x\C-r":re-read-init-file'.
     Options, if supplied, have the following meanings:

    `-m keymap'
          Use KEYMAP as the keymap to be affected by the subsequent
          bindings.  Acceptable KEYMAP names are `emacs',
          `emacs-standard', `emacs-meta', `emacs-ctlx', `vi', `vi-move',
          `vi-command', and `vi-insert'.  `vi' is equivalent to
          `vi-command'; `emacs' is equivalent to `emacs-standard'.

    `-l'
          List the names of all readline functions

    `-v'
          List current function names and bindings

    `-d'
          Dump function names and bindings in such a way that they can
          be re-read

    `-f filename'
          Read key bindings from FILENAME

    `-q'
          Query about which keys invoke the named FUNCTION

`command'
          command [-pVv] COMMAND [ARGS ...]
     Runs COMMAND with ARG ignoring shell functions.  If you have a
     shell function called `ls', and you wish to call the command `ls',
     you can say `command ls'.  The `-p' option means to use a default
     value for `$PATH' that is guaranteed to find all of the standard
     utilities.

     If either the `-V' or `-v' option is supplied, a description of
     COMMAND is printed.  The `-v' option causes a single word
     indicating the command or file name used to invoke COMMAND to be
     printed; the `-V' option produces a more verbose description.

`declare'
          declare [-frxi] [NAME[=VALUE]]

     Declare variables and/or give them attributes.  If no NAMEs are
     given, then display the values of variables instead.  `-f' means
     to use function names only.  `-r' says to make NAMEs readonly.
     `-x' says to mark NAMEs for export.  `-i' says that the variable
     is to be treated as an integer; arithmetic evaluation (*note Shell
     Arithmetic::) is performed when the variable is assigned a value.
     Using `+' instead of `-' turns off the attribute instead.  When
     used in a function, `declare' makes NAMEs local, as with the
     `local' command.

`enable'
          enable [-n] [-a] [NAME ...]
     Enable and disable builtin shell commands.  This allows you to use
     a disk command which has the same name as a shell builtin.  If
     `-n' is used, the NAMEs become disabled.  Otherwise NAMEs are
     enabled.  For example, to use the `test' binary found via `$PATH'
     instead of the shell builtin version, type `enable -n test'.  The
     `-a' option means to list each builtin with an indication of
     whether or not it is enabled.

`help'
          help [PATTERN]
     Display helpful information about builtin commands.  If PATTERN is
     specified, `help' gives detailed help on all commands matching
     PATTERN, otherwise a list of the builtins is printed.

`local'
          local NAME[=VALUE]
     For each argument, create a local variable called NAME, and give
     it VALUE.  `local' can only be used within a function; it makes
     the variable NAME have a visible scope restricted to that function
     and its children.

`type'
          type [-all] [-type | -path] [NAME ...]
     For each NAME, indicate how it would be interpreted if used as a
     command name.

     If the `-type' flag is used, `type' returns a single word which is
     one of "alias", "function", "builtin", "file" or "keyword", if
     NAME is an alias, shell function, shell builtin, disk file, or
     shell reserved word, respectively.

     If the `-path' flag is used, `type' either returns the name of the
     disk file that would be executed, or nothing if `-type' would not
     return "file".

     If the `-all' flag is used, returns all of the places that contain
     an executable named FILE.  This includes aliases and functions, if
     and only if the `-path' flag is not also used.

     `Type' accepts `-a', `-t', and `-p' as equivalent to `-all',
     `-type', and `-path', respectively.

`ulimit'
          ulimit [-acdmstfpnuvSH] [LIMIT]
     `Ulimit' provides control over the resources available to processes
     started by the shell, on systems that allow such control.  If an
     option is given, it is interpreted as follows:
    `-S'
          change and report the soft limit associated with a resource
          (the default if the `-H' option is not given).

    `-H'
          change and report the hard limit associated with a resource.

    `-a'
          all current limits are reported.

    `-c'
          the maximum size of core files created.

    `-d'
          the maximum size of a process's data segment.

    `-m'
          the maximum resident set size.

    `-s'
          the maximum stack size.

    `-t'
          the maximum amount of cpu time in seconds.

    `-f'
          the maximum size of files created by the shell.

    `-p'
          the pipe buffer size.

    `-n'
          the maximum number of open file descriptors.

    `-u'
          the maximum number of processes available to a single user.

    `-v'
          the maximum amount of virtual memory available to the process.

     If LIMIT is given, it is the new value of the specified resource.
     Otherwise, the current value of the specified resource is printed.
     If no option is given, then `-f' is assumed.  Values are in
     1024-byte increments, except for `-t', which is in seconds, `-p',
     which is in units of 512-byte blocks, and `-n' and `-u', which are
     unscaled values.


File: features.info,  Node: The Set Builtin,  Next: Bash Variables,  Prev: Bash Builtins,  Up: Bash Specific Features

The Set Builtin
===============

   This builtin is so overloaded that it deserves its own section.

`set'
          set [-abefhkmnptuvxldCHP] [-o OPTION] [ARGUMENT ...]

    `-a'
          Mark variables which are modified or created for export.

    `-b'
          Cause the status of terminated background jobs to be reported
          immediately, rather than before printing the next primary
          prompt.

    `-e'
          Exit immediately if a command exits with a non-zero status.

    `-f'
          Disable file name generation (globbing).

    `-h'
          Locate and remember (hash) commands as functions are defined,
          rather than when the function is executed.

    `-k'
          All keyword arguments are placed in the environment for a
          command, not just those that precede the command name.

    `-m'
          Job control is enabled (*note Job Control::).

    `-n'
          Read commands but do not execute them.

    `-o OPTION-NAME'
          Set the flag corresponding to OPTION-NAME:

         `allexport'
               same as `-a'.

         `braceexpand'
               the shell will perform brace expansion (*note Brace
               Expansion::).

         `emacs'
               use an emacs-style line editing interface (*note Command
               Line Editing::).

         `errexit'
               same as `-e'.

         `histexpand'
               same as `-H'.

         `ignoreeof'
               the shell will not exit upon reading EOF.

         `interactive-comments'
               allow a word beginning with a `#' to cause that word and
               all remaining characters on that line to be ignored in an
               interactive shell.

         `monitor'
               same as `-m'.

         `noclobber'
               same as `-C'.

         `noexec'
               same as `-n'.

         `noglob'
               same as `-f'.

         `nohash'
               same as `-d'.

         `notify'
               same as `-b'.

         `nounset'
               same as `-u'.

         `physical'
               same as `-P'.

         `posix'
               change the behavior of Bash where the default operation
               differs from the Posix 1003.2 standard to match the
               standard.  This is intended to make Bash behave as a
               strict superset of that standard.

         `privileged'
               same as `-p'.

         `verbose'
               same as `-v'.

         `vi'
               use a `vi'-style line editing interface.

         `xtrace'
               same as `-x'.

    `-p'
          Turn on privileged mode.  In this mode, the `$ENV' file is
          not processed, and shell functions are not inherited from the
          environment.  This is enabled automatically on startup if the
          effective user (group) id is not equal to the real user
          (group) id.  Turning this option off causes the effective user
          and group ids to be set to the real user and group ids.

    `-t'
          Exit after reading and executing one command.

    `-u'
          Treat unset variables as an error when substituting.

    `-v'
          Print shell input lines as they are read.

    `-x'
          Print commands and their arguments as they are executed.

    `-l'
          Save and restore the binding of the NAME in a `for' command.

    `-d'
          Disable the hashing of commands that are looked up for
          execution.  Normally, commands are remembered in a hash
          table, and once found, do not have to be looked up again.

    `-C'
          Disallow output redirection to existing files.

    `-H'
          Enable ! style history substitution.  This flag is on by
          default.

    `-P'
          If set, do not follow symbolic links when performing commands
          such as `cd' which change the current directory.  The
          physical directory is used instead.

    `--'
          If no arguments follow this flag, then the positional
          parameters are unset.  Otherwise, the positional parameters
          are set to the ARGUMENTS, even if some of them begin with a
          `-'.

    `-'
          Signal the end of options, cause all remaining ARGUMENTS to
          be assigned to the positional parameters.  The `-x' and `-v'
          options are turned off.  If there are no arguments, the
          positional parameters remain unchanged.

     Using `+' rather than `-' causes these flags to be turned off.
     The flags can also be used upon invocation of the shell.  The
     current set of flags may be found in `$-'.  The remaining N
     ARGUMENTS are positional parameters and are assigned, in order, to
     `$1', `$2', ..  `$N'.  If no arguments are given, all shell
     variables are printed.


File: features.info,  Node: Bash Variables,  Next: Shell Arithmetic,  Prev: The Set Builtin,  Up: Bash Specific Features

Bash Variables
==============

   These variables are set or used by bash, but other shells do not
normally treat them specially.

`HISTCONTROL'
`history_control'
     Set to a value of `ignorespace', it means don't enter lines which
     begin with a space or tab into the history list.  Set to a value
     of `ignoredups', it means don't enter lines which match the last
     entered line.  A value of `ignoreboth' combines the two options.
     Unset, or set to any other value than those above, means to save
     all lines on the history list.

`HISTFILE'
     The name of the file to which the command history is saved.

`HISTSIZE'
     If set, this is the maximum number of commands to remember in the
     history.

`histchars'
     Up to three characters which control history expansion, quick
     substitution, and tokenization (*note History Interaction::).  The
     first character is the "history-expansion-char", that is, the
     character which signifies the start of a history expansion,
     normally `!'.  The second character is the character which
     signifies `quick substitution' when seen as the first character on
     a line, normally `^'.  The optional third character is the
     character which signifies the remainder of the line is a comment,
     when found as the first character of a word, usually `#'.  The
     history comment character causes history substitution to be
     skipped for the remaining words on the line.  It does not
     necessarily cause the shell parser to treat the rest of the line
     as a comment.

`HISTCMD'
     The history number, or index in the history list, of the current
     command.  If `HISTCMD' is unset, it loses its special properties,
     even if it is subsequently reset.

`hostname_completion_file'
`HOSTFILE'
     Contains the name of a file in the same format as `/etc/hosts' that
     should be read when the shell needs to complete a hostname.  You
     can change the file interactively; the next time you attempt to
     complete a hostname, Bash will add the contents of the new file to
     the already existing database.

`MAILCHECK'
     How often (in seconds) that the shell should check for mail in the
     files specified in `MAILPATH'.

`PROMPT_COMMAND'
     If present, this contains a string which is a command to execute
     before the printing of each primary prompt (`$PS1').

`UID'
     The numeric real user id of the current user.

`EUID'
     The numeric effective user id of the current user.

`HOSTTYPE'
     A string describing the machine Bash is running on.

`OSTYPE'
     A string describing the operating system Bash is running on.

`FIGNORE'
     A colon-separated list of suffixes to ignore when performing
     filename completion A file name whose suffix matches one of the
     entries in `FIGNORE' is excluded from the list of matched file
     names.  A sample value is `.o:~'

`INPUTRC'
     The name of the Readline startup file, overriding the default of
     `~/.inputrc'.

`BASH_VERSION'
     The version number of the current instance of Bash.

`IGNOREEOF'
     Controls the action of the shell on receipt of an `EOF' character
     as the sole input.  If set, then the value of it is the number of
     consecutive `EOF' characters that can be read as the first
     characters on an input line before the shell will exit.  If the
     variable exists but does not have a numeric value (or has no
     value) then the default is 10.  If the variable does not exist,
     then `EOF' signifies the end of input to the shell.  This is only
     in effect for interactive shells.

`no_exit_on_failed_exec'
     If this variable exists, the shell will not exit in the case that
     it couldn't execute the file specified in the `exec' command.

`nolinks'
     If present, says not to follow symbolic links when doing commands
     that change the current working directory.  By default, bash
     follows the logical chain of directories when performing commands
     such as `cd' which change the current directory.

     For example, if `/usr/sys' is a link to `/usr/local/sys' then:
          $ cd /usr/sys; echo $PWD
          /usr/sys
          $ cd ..; pwd
          /usr

     If `nolinks' exists, then:
          $ cd /usr/sys; echo $PWD
          /usr/local/sys
          $ cd ..; pwd
          /usr/local

     See also the description of the `-P' option to the `set' builtin,
     *Note The Set Builtin::.


File: features.info,  Node: Shell Arithmetic,  Next: Printing a Prompt,  Prev: Bash Variables,  Up: Bash Specific Features

Shell Arithmetic
================

* Menu:

* Arithmetic Evaluation::	How shell arithmetic works.
* Arithmetic Expansion::	How to use arithmetic in shell expansions.
* Arithmetic Builtins::		Builtin commands that use shell arithmetic.


File: features.info,  Node: Arithmetic Evaluation,  Next: Arithmetic Expansion,  Up: Shell Arithmetic

Arithmetic Evaluation
---------------------

   The shell allows arithmetic expressions to be evaluated, as one of
the shell expansions or by the `let' builtin.

   Evaluation is done in long integers with no check for overflow,
though division by 0 is trapped and flagged as an error.  The following
list of operators is grouped into levels of equal-precedence operators.
The levels are listed in order of decreasing precedence.

`- +'
     unary minus and plus

`! ~'
     logical and bitwise negation

`* / %'
     multiplication, division, remainder

`+ -'
     addition, subtraction

`<< >>'
     left and right bitwise shifts

`<= >= < >'
     comparison

`== !='
     equality and inequality

`&'
     bitwise AND

`^'
     bitwise exclusive OR

`|'
     bitwise OR

`&&'
     logical AND

`||'
     logical OR

`= *= /= %= += -= <<= >>= &= ^= |='
     assignment

   Shell variables are allowed as operands; parameter expansion is
performed before the expression is evaluated.  The value of a parameter
is coerced to a long integer within an expression.  A shell variable
need not have its integer attribute turned on to be used in an
expression.

   Constants with a leading 0 are interpreted as octal numbers.  A
leading `0x' or `0X' denotes hexadecimal.  Otherwise, numbers take the
form [BASE#]n, where BASE is a decimal number between 2 and 36
representing the arithmetic base, and N is a number in that base.  If
BASE is omitted, then base 10 is used.

   Operators are evaluated in order of precedence.  Sub-expressions in
parentheses are evaluated first and may override the precedence rules
above.


File: features.info,  Node: Arithmetic Expansion,  Next: Arithmetic Builtins,  Prev: Arithmetic Evaluation,  Up: Shell Arithmetic

Arithmetic Expansion
--------------------

   Arithmetic expansion allows the evaluation of an arithmetic
expression and the substitution of the result.  There are two formats
for arithmetic expansion:

     $[ expression ]
     $(( expression ))

   The expression is treated as if it were within double quotes, but a
double quote inside the braces or parentheses is not treated specially.
All tokens in the expression undergo parameter expansion, command
substitution, and quote removal.  Arithmetic substitutions may be
nested.

   The evaluation is performed according to the rules listed above.  If
the expression is invalid, Bash prints a message indicating failure and
no substitution occurs.


File: features.info,  Node: Arithmetic Builtins,  Prev: Arithmetic Expansion,  Up: Shell Arithmetic

Arithmetic Builtins
-------------------

`let'
          let EXPRESSION [EXPRESSION]
     The `let' builtin allows arithmetic to be performed on shell
     variables.  Each EXPRESSION is evaluated according to the rules
     given previously (*note Arithmetic Evaluation::).  If the last
     EXPRESSION evaluates to 0, `let' returns 1; otherwise 0 is
     returned.


File: features.info,  Node: Printing a Prompt,  Prev: Shell Arithmetic,  Up: Bash Specific Features

Controlling the Prompt
======================

   The value of the variable `$PROMPT_COMMAND' is examined just before
Bash prints each primary prompt.  If it is set and non-null, then the
value is executed just as if you had typed it on the command line.

   In addition, the following table describes the special characters
which can appear in the `PS1' variable:

`\t'
     the time, in HH:MM:SS format.

`\d'
     the date, in "Weekday Month Date" format (e.g. "Tue May 26").

`\n'
     newline.

`\s'
     the name of the shell, the basename of `$0' (the portion following
     the final slash).

`\w'
     the current working directory.

`\W'
     the basename of `$PWD'.

`\u'
     your username.

`\h'
     the hostname.

`\#'
     the command number of this command.

`\!'
     the history number of this command.

`\nnn'
     the character corresponding to the octal number `nnn'.

`\$'
     if the effective uid is 0, `#', otherwise `$'.

`\\'
     a backslash.

`\['
     begin a sequence of non-printing characters.  This could be used to
     embed a terminal control sequence into the prompt.

`\]'
     end a sequence of non-printing characters.


File: features.info,  Node: Job Control,  Next: Using History Interactively,  Prev: Bash Specific Features,  Up: Top

Job Control
***********

   This chapter disusses what job control is, how it works, and how
Bash allows you to access its facilities.

* Menu:

* Job Control Basics::		How job control works.
* Job Control Builtins::	Bash builtin commands used to interact
				with job control.
* Job Control Variables::	Variables Bash uses to customize job
				control.


File: features.info,  Node: Job Control Basics,  Next: Job Control Builtins,  Up: Job Control

Job Control Basics
==================

   Job control refers to the ability to selectively stop (suspend) the
execution of processes and continue (resume) their execution at a later
point.  A user typically employs this facility via an interactive
interface supplied jointly by the system's terminal driver and Bash.

   The shell associates a JOB with each pipeline.  It keeps a table of
currently executing jobs, which may be listed with the `jobs' command.
When Bash starts a job asynchronously (in the background), it prints a
line that looks like:
     [1] 25647
   indicating that this job is job number 1 and that the process ID of
the last process in the pipeline associated with this job is 25647.
All of the processes in a single pipeline are members of the same job.
Bash uses the JOB abstraction as the basis for job control.

   To facilitate the implementation of the user interface to job
control, the system maintains the notion of a current terminal process
group ID.  Members of this process group (processes whose process group
ID is equal to the current terminal process group ID) receive
keyboard-generated signals such as `SIGINT'.  These processes are said
to be in the foreground.  Background processes are those whose process
group ID differs from the terminal's; such processes are immune to
keyboard-generated signals.  Only foreground processes are allowed to
read from or write to the terminal.  Background processes which attempt
to read from (write to) the terminal are sent a `SIGTTIN' (`SIGTTOU')
signal by the terminal driver, which, unless caught, suspends the
process.

   If the operating system on which Bash is running supports job
control, Bash allows you to use it.  Typing the SUSPEND character
(typically `^Z', Control-Z) while a process is running causes that
process to be stopped and returns you to Bash.  Typing the DELAYED
SUSPEND character (typically `^Y', Control-Y) causes the process to be
stopped when it attempts to read input from the terminal, and control to
be returned to Bash.  You may then manipulate the state of this job,
using the `bg' command to continue it in the background, the `fg'
command to continue it in the foreground, or the `kill' command to kill
it.  A `^Z' takes effect immediately, and has the additional side
effect of causing pending output and typeahead to be discarded.

   There are a number of ways to refer to a job in the shell.  The
character `%' introduces a job name.  Job number `n' may be referred to
as `%n'.  A job may also be referred to using a prefix of the name used
to start it, or using a substring that appears in its command line.
For example, `%ce' refers to a stopped `ce' job. Using `%?ce', on the
other hand, refers to any job containing the string `ce' in its command
line.  If the prefix or substring matches more than one job, Bash
reports an error.  The symbols `%%' and `%+' refer to the shell's
notion of the current job, which is the last job stopped while it was
in the foreground.  The previous job may be referenced using `%-'.  In
output pertaining to jobs (e.g., the output of the `jobs' command), the
current job is always flagged with a `+', and the previous job with a
`-'.

   Simply naming a job can be used to bring it into the foreground:
`%1' is a synonym for `fg %1' bringing job 1 from the background into
the foreground.  Similarly, `%1 &' resumes job 1 in the background,
equivalent to `bg %1'

   The shell learns immediately whenever a job changes state.
Normally, Bash waits until it is about to print a prompt before
reporting changes in a job's status so as to not interrupt any other
output.  If the the `-b' option to the `set' builtin is set, Bash
reports such changes immediately (*note The Set Builtin::).  This
feature is also controlled by the variable `notify'.

   If you attempt to exit bash while jobs are stopped, the shell prints
a message warning you.  You may then use the `jobs' command to inspect
their status.  If you do this, or try to exit again immediately, you
are not warned again, and the stopped jobs are terminated.


File: features.info,  Node: Job Control Builtins,  Next: Job Control Variables,  Prev: Job Control Basics,  Up: Job Control

Job Control Builtins
====================

`bg'
          bg [JOBSPEC]
     Place JOBSPEC into the background, as if it had been started with
     `&'.  If JOBSPEC is not supplied, the current job is used.

`fg'
          fg [JOBSPEC]
     Bring JOBSPEC into the foreground and make it the current job.  If
     JOBSPEC is not supplied, the current job is used.

`jobs'
          jobs [-lpn] [JOBSPEC]
          jobs -x COMMAND [JOBSPEC]

     The first form lists the active jobs.  The `-l' option lists
     process IDs in addition to the normal information; the `-p' option
     lists only the process ID of the job's process group leader.  The
     `-n' option displays only jobs that have changed status since last
     notfied.  If JOBSPEC is given, output is restricted to information
     about that job.  If JOBSPEC is not supplied, the status of all
     jobs is listed.

     If the `-x' option is supplied, `jobs' replaces any JOBSPEC found
     in COMMAND or ARGUMENTS with the corresponding process group ID,
     and executes COMMAND, passing it ARGUMENTs, returning its exit
     status.

`suspend'
          suspend [-f]
     Suspend the execution of this shell until it receives a `SIGCONT'
     signal.  The `-f' option means to suspend even if the shell is a
     login shell.

   When job control is active, the `kill' and `wait' builtins also
accept JOBSPEC arguments.


File: features.info,  Node: Job Control Variables,  Prev: Job Control Builtins,  Up: Job Control

Job Control Variables
=====================

`auto_resume'
     This variable controls how the shell interacts with the user and
     job control.  If this variable exists then single word simple
     commands without redirects are treated as candidates for resumption
     of an existing job.  There is no ambiguity allowed; if you have
     more than one job beginning with the string that you have typed,
     then the most recently accessed job will be selected.  The name of
     a stopped job, in this context, is the command line used to start
     it.  If this variable is set to the value `exact', the string
     supplied must match the name of a stopped job exactly; if set to
     `substring', the string supplied needs to match a substring of the
     name of a stopped job.  The `substring' value provides
     functionality analogous to the `%?' job id (*note Job Control
     Basics::).  If set to any other value, the supplied string must be
     a prefix of a stopped job's name; this provides functionality
     analogous to the `%' job id.

`notify'
     Setting this variable to a value is equivalent to `set -b';
     unsetting it is equivalent to `set +b' (*note The Set Builtin::).


File: features.info,  Node: Using History Interactively,  Next: Command Line Editing,  Prev: Job Control,  Up: Top

Using History Interactively
***************************

   This chapter describes how to use the GNU History Library
interactively, from a user's standpoint.  It should be considered a
user's guide.  For information on using the GNU History Library in your
own programs, see the GNU Readline Library Manual.

* Menu:

* History Interaction::		What it feels like using History as a user.


File: features.info,  Node: History Interaction,  Up: Using History Interactively

History Interaction
===================

   The History library provides a history expansion feature that is
similar to the history expansion provided by `csh'.  The following text
describes the syntax used to manipulate the history information.

   History expansion takes place in two parts.  The first is to
determine which line from the previous history should be used during
substitution.  The second is to select portions of that line for
inclusion into the current one.  The line selected from the previous
history is called the "event", and the portions of that line that are
acted upon are called "words".  The line is broken into words in the
same fashion that Bash does, so that several English (or Unix) words
surrounded by quotes are considered as one word.

* Menu:

* Event Designators::	How to specify which history line to use.
* Word Designators::	Specifying which words are of interest.
* Modifiers::		Modifying the results of substitution.


File: features.info,  Node: Event Designators,  Next: Word Designators,  Up: History Interaction

Event Designators
-----------------

   An event designator is a reference to a command line entry in the
history list.

`!'
     Start a history substitution, except when followed by a space, tab,
     the end of the line, <=> or <(>.

`!!'
     Refer to the previous command.  This is a synonym for `!-1'.

`!n'
     Refer to command line N.

`!-n'
     Refer to the command N lines back.

`!string'
     Refer to the most recent command starting with STRING.

`!?string'[`?']
     Refer to the most recent command containing STRING.

`!#'
     The entire command line typed so far.

`^string1^string2^'
     Quick Substitution.  Repeat the last command, replacing STRING1
     with STRING2.  Equivalent to `!!:s/string1/string2/'.


File: features.info,  Node: Word Designators,  Next: Modifiers,  Prev: Event Designators,  Up: History Interaction

Word Designators
----------------

   A <:> separates the event specification from the word designator.  It
can be omitted if the word designator begins with a <^>, <$>, <*> or
<%>.  Words are numbered from the beginning of the line, with the first
word being denoted by a 0 (zero).

`0 (zero)'
     The `0'th word.  For many applications, this is the command word.

`n'
     The Nth word.

`^'
     The first argument;  that is, word 1.

`$'
     The last argument.

`%'
     The word matched by the most recent `?string?' search.

`x-y'
     A range of words; `-Y' abbreviates `0-Y'.

`*'
     All of the words, except the `0'th.  This is a synonym for `1-$'.
     It is not an error to use <*> if there is just one word in the
     event; the empty string is returned in that case.

`x*'
     Abbreviates `x-$'

`x-'
     Abbreviates `x-$' like `x*', but omits the last word.


File: features.info,  Node: Modifiers,  Prev: Word Designators,  Up: History Interaction

Modifiers
---------

   After the optional word designator, you can add a sequence of one or
more of the following modifiers, each preceded by a <:>.

`h'
     Remove a trailing pathname component, leaving only the head.

`r'
     Remove a trailing suffix of the form `.'SUFFIX, leaving the
     basename.

`e'
     Remove all but the trailing suffix.

`t'
     Remove all leading  pathname  components, leaving the tail.

`p'
     Print the new command but do not execute it.

`q'
     Quote the substituted words, escaping further substitutions.

`x'
     Quote the substituted words as with `q', but break into words at
     spaces, tabs, and newlines.

`s/old/new/'
     Substitute NEW for the first occurrence of OLD in the event line.
     Any delimiter may be used in place of </>.  The delimiter may be
     quoted in OLD and NEW with a single backslash.  If <&> appears in
     NEW, it is replaced by OLD.  A single backslash will quote the
     <&>.  The final delimiter is optional if it is the last character
     on the input line.

`&'
     Repeat the previous substitution.

`g'
     Cause changes to be applied over the entire event line.  Used in
     conjunction with `s', as in `gs/old/new/', or with `&'.


File: features.info,  Node: Command Line Editing,  Next: Variable Index,  Prev: Using History Interactively,  Up: Top

Command Line Editing
********************

   This chapter describes the basic features of the GNU command line
editing interface.

* Menu:

* Introduction and Notation::	Notation used in this text.
* Readline Interaction::	The minimum set of commands for editing a line.
* Readline Init File::		Customizing Readline from a user's view.
* Bindable Readline Commands::	A description of most of the Readline commands
				available for binding
* Readline vi Mode::		A short description of how to make Readline
				behave like the vi editor.


File: features.info,  Node: Introduction and Notation,  Next: Readline Interaction,  Up: Command Line Editing

Introduction to Line Editing
============================

   The following paragraphs describe the notation used to represent
keystrokes.

   The text <C-k> is read as `Control-K' and describes the character
produced when the Control key is depressed and the <k> key is struck.

   The text <M-k> is read as `Meta-K' and describes the character
produced when the meta key (if you have one) is depressed, and the <k>
key is struck.  If you do not have a meta key, the identical keystroke
can be generated by typing <ESC> first, and then typing <k>.  Either
process is known as "metafying" the <k> key.

   The text <M-C-k> is read as `Meta-Control-k' and describes the
character produced by "metafying" <C-k>.

   In addition, several keys have their own names.  Specifically,
<DEL>, <ESC>, <LFD>, <SPC>, <RET>, and <TAB> all stand for themselves
when seen in this text, or in an init file (*note Readline Init File::,
for more info).


File: features.info,  Node: Readline Interaction,  Next: Readline Init File,  Prev: Introduction and Notation,  Up: Command Line Editing

Readline Interaction
====================

   Often during an interactive session you type in a long line of text,
only to notice that the first word on the line is misspelled.  The
Readline library gives you a set of commands for manipulating the text
as you type it in, allowing you to just fix your typo, and not forcing
you to retype the majority of the line.  Using these editing commands,
you move the cursor to the place that needs correction, and delete or
insert the text of the corrections.  Then, when you are satisfied with
the line, you simply press <RETURN>.  You do not have to be at the end
of the line to press <RETURN>; the entire line is accepted regardless
of the location of the cursor within the line.

* Menu:

* Readline Bare Essentials::	The least you need to know about Readline.
* Readline Movement Commands::	Moving about the input line.
* Readline Killing Commands::	How to delete text, and how to get it back!
* Readline Arguments::		Giving numeric arguments to commands.


File: features.info,  Node: Readline Bare Essentials,  Next: Readline Movement Commands,  Up: Readline Interaction

Readline Bare Essentials
------------------------

   In order to enter characters into the line, simply type them.  The
typed character appears where the cursor was, and then the cursor moves
one space to the right.  If you mistype a character, you can use your
erase character to back up and delete the mistyped character.

   Sometimes you may miss typing a character that you wanted to type,
and not notice your error until you have typed several other
characters.  In that case, you can type <C-b> to move the cursor to the
left, and then correct your mistake.  Afterwards, you can move the
cursor to the right with <C-f>.

   When you add text in the middle of a line, you will notice that
characters to the right of the cursor are `pushed over' to make room
for the text that you have inserted.  Likewise, when you delete text
behind the cursor, characters to the right of the cursor are `pulled
back' to fill in the blank space created by the removal of the text.  A
list of the basic bare essentials for editing the text of an input line
follows.

<C-b>
     Move back one character.

<C-f>
     Move forward one character.

<DEL>
     Delete the character to the left of the cursor.

<C-d>
     Delete the character underneath the cursor.

Printing characters
     Insert the character into the line at the cursor.

<C-_>
     Undo the last thing that you did.  You can undo all the way back
     to an empty line.


File: features.info,  Node: Readline Movement Commands,  Next: Readline Killing Commands,  Prev: Readline Bare Essentials,  Up: Readline Interaction

Readline Movement Commands
--------------------------

   The above table describes the most basic possible keystrokes that
you need in order to do editing of the input line.  For your
convenience, many other commands have been added in addition to <C-b>,
<C-f>, <C-d>, and <DEL>.  Here are some commands for moving more rapidly
about the line.

<C-a>
     Move to the start of the line.

<C-e>
     Move to the end of the line.

<M-f>
     Move forward a word.

<M-b>
     Move backward a word.

<C-l>
     Clear the screen, reprinting the current line at the top.

   Notice how <C-f> moves forward a character, while <M-f> moves
forward a word.  It is a loose convention that control keystrokes
operate on characters while meta keystrokes operate on words.


File: features.info,  Node: Readline Killing Commands,  Next: Readline Arguments,  Prev: Readline Movement Commands,  Up: Readline Interaction

Readline Killing Commands
-------------------------

   "Killing" text means to delete the text from the line, but to save
it away for later use, usually by "yanking" (re-inserting) it back into
the line.  If the description for a command says that it `kills' text,
then you can be sure that you can get the text back in a different (or
the same) place later.

   When you use a kill command, the text is saved in a "kill-ring".
Any number of consecutive kills save all of the killed text together, so
that when you yank it back, you get it all.  The kill ring is not line
specific; the text that you killed on a previously typed line is
available to be yanked back later, when you are typing another line.

   Here is the list of commands for killing text.

<C-k>
     Kill the text from the current cursor position to the end of the
     line.

<M-d>
     Kill from the cursor to the end of the current word, or if between
     words, to the end of the next word.

<M-DEL>
     Kill from the cursor the start of the previous word, or if between
     words, to the start of the previous word.

<C-w>
     Kill from the cursor to the previous whitespace.  This is
     different than <M-DEL> because the word boundaries differ.

   And, here is how to "yank" the text back into the line.  Yanking
means to copy the most-recently-killed text from the kill buffer.

<C-y>
     Yank the most recently killed text back into the buffer at the
     cursor.

<M-y>
     Rotate the kill-ring, and yank the new top.  You can only do this
     if the prior command is <C-y> or <M-y>.


File: features.info,  Node: Readline Arguments,  Prev: Readline Killing Commands,  Up: Readline Interaction

Readline Arguments
------------------

   You can pass numeric arguments to Readline commands.  Sometimes the
argument acts as a repeat count, other times it is the sign of the
argument that is significant.  If you pass a negative argument to a
command which normally acts in a forward direction, that command will
act in a backward direction.  For example, to kill text back to the
start of the line, you might type <M-> <C-k>.

   The general way to pass numeric arguments to a command is to type
meta digits before the command.  If the first `digit' you type is a
minus sign (<->), then the sign of the argument will be negative.  Once
you have typed one meta digit to get the argument started, you can type
the remainder of the digits, and then the command.  For example, to give
the <C-d> command an argument of 10, you could type <M-1 0 C-d>.


File: features.info,  Node: Readline Init File,  Next: Bindable Readline Commands,  Prev: Readline Interaction,  Up: Command Line Editing

Readline Init File
==================

   Although the Readline library comes with a set of Emacs-like
keybindings installed by default, it is possible that you would like to
use a different set of keybindings.  You can customize programs that
use Readline by putting commands in an "init" file in your home
directory.  The name of this file is taken from the value of the shell
variable `INPUTRC'.  If that variable is unset, the default is
`~/.inputrc'.

   When a program which uses the Readline library starts up, the init
file is read, and the key bindings are set.

   In addition, the `C-x C-r' command re-reads this init file, thus
incorporating any changes that you might have made to it.

* Menu:

* Readline Init Syntax::	Syntax for the commands in the inputrc file.
* Conditional Init Constructs::	Conditional key bindings in the inputrc file.


File: features.info,  Node: Readline Init Syntax,  Next: Conditional Init Constructs,  Up: Readline Init File

Readline Init Syntax
--------------------

   There are only a few basic constructs allowed in the Readline init
file.  Blank lines are ignored.  Lines beginning with a <#> are
comments.  Lines beginning with a <$> indicate conditional constructs
(*note Conditional Init Constructs::).  Other lines denote variable
settings and key bindings.

Variable Settings
     You can change the state of a few variables in Readline by using
     the `set' command within the init file.  Here is how you would
     specify that you wish to use `vi' line editing commands:

          set editing-mode vi

     Right now, there are only a few variables which can be set; so
     few, in fact, that we just list them here:

    `editing-mode'
          The `editing-mode' variable controls which editing mode you
          are using.  By default, Readline starts up in Emacs editing
          mode, where the keystrokes are most similar to Emacs.  This
          variable can be set to either `emacs' or `vi'.

    `horizontal-scroll-mode'
          This variable can be set to either `On' or `Off'.  Setting it
          to `On' means that the text of the lines that you edit will
          scroll horizontally on a single screen line when they are
          longer than the width of the screen, instead of wrapping onto
          a new screen line.  By default, this variable is set to `Off'.

    `mark-modified-lines'
          This variable, when set to `On', says to display an asterisk
          (`*') at the start of history lines which have been modified.
          This variable is `off' by default.

    `bell-style'
          Controls what happens when Readline wants to ring the
          terminal bell.  If set to `none', Readline never rings the
          bell.  If set to `visible', Readline uses a visible bell if
          one is available.  If set to `audible' (the default),
          Readline attempts to ring the terminal's bell.

    `comment-begin'
          The string to insert at the beginning of the line when the
          `vi-comment' command is executed.  The default value is `"#"'.

    `meta-flag'
          If set to `on', Readline will enable eight-bit input (it will
          not strip the eighth bit from the characters it reads),
          regardless of what the terminal claims it can support.  The
          default value is `off'.

    `convert-meta'
          If set to `on', Readline will convert characters with the
          eigth bit set to an ASCII key sequence by stripping the eigth
          bit and prepending an <ESC> character, converting them to a
          meta-prefixed key sequence.  The default value is `on'.

    `output-meta'
          If set to `on', Readline will display characters with the
          eighth bit set directly rather than as a meta-prefixed escape
          sequence.  The default is `off'.

    `completion-query-items'
          The number of possible completions that determines when the
          user is asked whether he wants to see the list of
          possibilities.  If the number of possible completions is
          greater than this value, Readline will ask the user whether
          or not he wishes to view them; otherwise, they are simply
          listed.  The default limit is `100'.

    `keymap'
          Sets Readline's idea of the current keymap for key binding
          commands.  Acceptable `keymap' names are `emacs',
          `emacs-standard', `emacs-meta', `emacs-ctlx', `vi', `vi-move',
          `vi-command', and `vi-insert'.  `vi' is equivalent to
          `vi-command'; `emacs' is equivalent to `emacs-standard'.  The
          default value is `emacs'.  The value of the `editing-mode'
          variable also affects the default keymap.

    `show-all-if-ambiguous'
          This alters the default behavior of the completion functions.
          If set to `on', words which have more than one possible
          completion cause the matches to be listed immediately instead
          of ringing the bell.  The default value is `off'.

    `expand-tilde'
          If set to `on', tilde expansion is performed when Readline
          attempts word completion.  The default is `off'.

Key Bindings
     The syntax for controlling key bindings in the init file is
     simple.  First you have to know the name of the command that you
     want to change.  The following pages contain tables of the command
     name, the default keybinding, and a short description of what the
     command does.

     Once you know the name of the command, simply place the name of
     the key you wish to bind the command to, a colon, and then the
     name of the command on a line in the init file.  The name of the
     key can be expressed in different ways, depending on which is most
     comfortable for you.

    KEYNAME: FUNCTION-NAME or MACRO
          KEYNAME is the name of a key spelled out in English.  For
          example:
               Control-u: universal-argument
               Meta-Rubout: backward-kill-word
               Control-o: ">&output"

          In the above example, `C-u' is bound to the function
          `universal-argument', and `C-o' is bound to run the macro
          expressed on the right hand side (that is, to insert the text
          `>&output' into the line).

    "KEYSEQ": FUNCTION-NAME or MACRO
          KEYSEQ differs from KEYNAME above in that strings denoting an
          entire key sequence can be specified, by placing the key
          sequence in double quotes.  Some GNU Emacs style key escapes
          can be used, as in the following example, but the special
          character names are not recognized.

               "\C-u": universal-argument
               "\C-x\C-r": re-read-init-file
               "\e[11~": "Function Key 1"

          In the above example, `C-u' is bound to the function
          `universal-argument' (just as it was in the first example),
          `C-x C-r' is bound to the function `re-read-init-file', and
          `ESC [ 1 1 ~' is bound to insert the text `Function Key 1'.
          The following escape sequences are available when specifying
          key sequences:

         `\C-'
               control prefix

         `\M-'
               meta prefix

         `\e'
               an escape character

         `\\'
               backslash

         `\"'
               <">

         `\''
               <'>

          When entering the text of a macro, single or double quotes
          should be used to indicate a macro definition.  Unquoted text
          is assumed to be a function name.  Backslash will quote any
          character in the macro text, including <"> and <'>.  For
          example, the following binding will make `C-x \' insert a
          single <\> into the line:
               "\C-x\\": "\\"


File: features.info,  Node: Conditional Init Constructs,  Prev: Readline Init Syntax,  Up: Readline Init File

Conditional Init Constructs
---------------------------

   Readline implements a facility similar in spirit to the conditional
compilation features of the C preprocessor which allows key bindings
and variable settings to be performed as the result of tests.  There
are three parser directives used.

`$if'
     The `$if' construct allows bindings to be made based on the
     editing mode, the terminal being used, or the application using
     Readline.  The text of the test extends to the end of the line; no
     characters are required to isolate it.

    `mode'
          The `mode=' form of the `$if' directive is used to test
          whether Readline is in `emacs' or `vi' mode.  This may be
          used in conjunction with the `set keymap' command, for
          instance, to set bindings in the `emacs-standard' and
          `emacs-ctlx' keymaps only if Readline is starting out in
          `emacs' mode.

    `term'
          The `term=' form may be used to include terminal-specific key
          bindings, perhaps to bind the key sequences output by the
          terminal's function keys.  The word on the right side of the
          `=' is tested against the full name of the terminal and the
          portion of the terminal name before the first `-'.  This
          allows SUN to match both SUN and SUN-CMD, for instance.

    `application'
          The APPLICATION construct is used to include
          application-specific settings.  Each program using the
          Readline library sets the APPLICATION NAME, and you can test
          for it.  This could be used to bind key sequences to
          functions useful for a specific program.  For instance, the
          following command adds a key sequence that quotes the current
          or previous word in Bash:
               $if bash
               # Quote the current or previous word
               "\C-xq": "\eb\"\ef\""
               $endif

`$endif'
     This command, as you saw in the previous example, terminates an
     `$if' command.

`$else'
     Commands in this branch of the `$if' directive are executed if the
     test fails.


File: features.info,  Node: Bindable Readline Commands,  Next: Readline vi Mode,  Prev: Readline Init File,  Up: Command Line Editing

Bindable Readline Commands
==========================

* Menu:

* Commands For Moving::		Moving about the line.
* Commands For History::	Getting at previous lines.
* Commands For Text::		Commands for changing text.
* Commands For Killing::	Commands for killing and yanking.
* Numeric Arguments::		Specifying numeric arguments, repeat counts.
* Commands For Completion::	Getting Readline to do the typing for you.
* Keyboard Macros::		Saving and re-executing typed characters
* Miscellaneous Commands::	Other miscellaneous commands.


File: features.info,  Node: Commands For Moving,  Next: Commands For History,  Up: Bindable Readline Commands

Commands For Moving
-------------------

`beginning-of-line (C-a)'
     Move to the start of the current line.

`end-of-line (C-e)'
     Move to the end of the line.

`forward-char (C-f)'
     Move forward a character.

`backward-char (C-b)'
     Move back a character.

`forward-word (M-f)'
     Move forward to the end of the next word.  Words are composed of
     letters and digits.

`backward-word (M-b)'
     Move back to the start of this, or the previous, word.  Words are
     composed of letters and digits.

`clear-screen (C-l)'
     Clear the screen and redraw the current line, leaving the current
     line at the top of the screen.

`redraw-current-line ()'
     Refresh the current line.  By default, this is unbound.


File: features.info,  Node: Commands For History,  Next: Commands For Text,  Prev: Commands For Moving,  Up: Bindable Readline Commands

Commands For Manipulating The History
-------------------------------------

`accept-line (Newline, Return)'
     Accept the line regardless of where the cursor is.  If this line is
     non-empty, add it to the history list according to the setting of
     the `HISTCONTROL' variable.  If this line was a history line, then
     restore the history line to its original state.

`previous-history (C-p)'
     Move `up' through the history list.

`next-history (C-n)'
     Move `down' through the history list.

`beginning-of-history (M-<)'
     Move to the first line in the history.

`end-of-history (M->)'
     Move to the end of the input history, i.e., the line you are
     entering.

`reverse-search-history (C-r)'
     Search backward starting at the current line and moving `up'
     through the history as necessary.  This is an incremental search.

`forward-search-history (C-s)'
     Search forward starting at the current line and moving `down'
     through the the history as necessary.  This is an incremental
     search.

`non-incremental-reverse-search-history (M-p)'
     Search backward starting at the current line and moving `up'
     through the history as necessary using a non-incremental search
     for a string supplied by the user.

`non-incremental-forward-search-history (M-n)'
     Search forward starting at the current line and moving `down'
     through the the history as necessary using a non-incremental search
     for a string supplied by the user.

`history-search-forward ()'
     Search forward through the history for the string of characters
     between the start of the current line and the current point.  This
     is a non-incremental search.  By default, this command is unbound.

`history-search-backward ()'
     Search backward through the history for the string of characters
     between the start of the current line and the current point.  This
     is a non-incremental search.  By default, this command is unbound.

`yank-nth-arg (M-C-y)'
     Insert the first argument to the previous command (usually the
     second word on the previous line).  With an argument N, insert the
     Nth word from the previous command (the words in the previous
     command begin with word 0).  A negative argument inserts the Nth
     word from the end of the previous command.

`yank-last-arg (M-., M-_)'
     Insert last argument to the previous command (the last word on the
     previous line).  With an argument, behave exactly like
     `yank-nth-arg'.


File: features.info,  Node: Commands For Text,  Next: Commands For Killing,  Prev: Commands For History,  Up: Bindable Readline Commands

Commands For Changing Text
--------------------------

`delete-char (C-d)'
     Delete the character under the cursor.  If the cursor is at the
     beginning of the line, there are no characters in the line, and
     the last character typed was not C-d, then return EOF.

`backward-delete-char (Rubout)'
     Delete the character behind the cursor.  A numeric arg says to kill
     the characters instead of deleting them.

`quoted-insert (C-q, C-v)'
     Add the next character that you type to the line verbatim.  This is
     how to insert key sequences like <C-q>, for example.

`tab-insert (M-TAB)'
     Insert a tab character.

`self-insert (a, b, A, 1, !, ...)'
     Insert yourself.

`transpose-chars (C-t)'
     Drag the character before the cursor forward over the character at
     the cursor, moving the cursor forward as well.  If the insertion
     point is at the end of the line, then this transposes the last two
     characters of the line.  Negative argumentss don't work.

`transpose-words (M-t)'
     Drag the word behind the cursor past the word in front of the
     cursor moving the cursor over that word as well.

`upcase-word (M-u)'
     Uppercase the current (or following) word.  With a negative
     argument, do the previous word, but do not move the cursor.

`downcase-word (M-l)'
     Lowercase the current (or following) word.  With a negative
     argument, do the previous word, but do not move the cursor.

`capitalize-word (M-c)'
     Capitalize the current (or following) word.  With a negative
     argument, do the previous word, but do not move the cursor.


File: features.info,  Node: Commands For Killing,  Next: Numeric Arguments,  Prev: Commands For Text,  Up: Bindable Readline Commands

Killing And Yanking
-------------------

`kill-line (C-k)'
     Kill the text from the current cursor position to the end of the
     line.

`backward-kill-line (C-x Rubout)'
     Kill backward to the beginning of the line.

`unix-line-discard (C-u)'
     Kill backward from the cursor to the beginning of the current line.
     Save the killed text on the kill-ring.

`kill-whole-line ()'
     Kill all characters on the current line, no matter where the
     cursor is.  By default, this is unbound.

`kill-word (M-d)'
     Kill from the cursor to the end of the current word, or if between
     words, to the end of the next word.  Word boundaries are the same
     as `forward-word'.

`backward-kill-word (M-DEL)'
     Kill the word behind the cursor.  Word boundaries are the same as
     `backward-word'.

`unix-word-rubout (C-w)'
     Kill the word behind the cursor, using white space as a word
     boundary.  The killed text is saved on the kill-ring.

`delete-horizontal-space ()'
     Delete all spaces and tabs around point.  By default, this is
     unbound.

`yank (C-y)'
     Yank the top of the kill ring into the buffer at the current
     cursor position.

`yank-pop (M-y)'
     Rotate the kill-ring, and yank the new top.  You can only do this
     if the prior command is yank or yank-pop.


File: features.info,  Node: Numeric Arguments,  Next: Commands For Completion,  Prev: Commands For Killing,  Up: Bindable Readline Commands

Specifying Numeric Arguments
----------------------------

`digit-argument (M-0, M-1, ... M--)'
     Add this digit to the argument already accumulating, or start a new
     argument.  M- starts a negative argument.

`universal-argument ()'
     Each time this is executed, the argument count is multiplied by
     four.  The argument count is initially one, so executing this
     function the first time makes the argument count four.  By
     default, this is not bound to a key.


File: features.info,  Node: Commands For Completion,  Next: Keyboard Macros,  Prev: Numeric Arguments,  Up: Bindable Readline Commands

Letting Readline Type For You
-----------------------------

`complete (TAB)'
     Attempt to do completion on the text before the cursor.  This is
     application-specific.  Generally, if you are typing a filename
     argument, you can do filename completion; if you are typing a
     command, you can do command completion, if you are typing in a
     symbol to GDB, you can do symbol name completion, if you are
     typing in a variable to Bash, you can do variable name completion,
     and so on.  See the Bash manual page for a complete list of
     available completion functions.

`possible-completions (M-?)'
     List the possible completions of the text before the cursor.

`insert-completions ()'
     Insert all completions of the text before point that would have
     been generated by `possible-completions'.  By default, this is not
     bound to a key.


File: features.info,  Node: Keyboard Macros,  Next: Miscellaneous Commands,  Prev: Commands For Completion,  Up: Bindable Readline Commands

Keyboard Macros
---------------

`start-kbd-macro (C-x ()'
     Begin saving the characters typed into the current keyboard macro.

`end-kbd-macro (C-x ))'
     Stop saving the characters typed into the current keyboard macro
     and save the definition.

`call-last-kbd-macro (C-x e)'
     Re-execute the last keyboard macro defined, by making the
     characters in the macro appear as if typed at the keyboard.


File: features.info,  Node: Miscellaneous Commands,  Prev: Keyboard Macros,  Up: Bindable Readline Commands

Some Miscellaneous Commands
---------------------------

`re-read-init-file (C-x C-r)'
     Read in the contents of your init file, and incorporate any
     bindings or variable assignments found there.

`abort (C-g)'
     Abort the current editing command and ring the terminal's bell
     (subject to the setting of `bell-style').

`do-uppercase-version (M-a, M-b, ...)'
     Run the command that is bound to the corresoponding uppercase
     character.

`prefix-meta (ESC)'
     Make the next character that you type be metafied.  This is for
     people without a meta key.  Typing `ESC f' is equivalent to typing
     `M-f'.

`undo (C-_, C-x C-u)'
     Incremental undo, separately remembered for each line.

`revert-line (M-r)'
     Undo all changes made to this line.  This is like typing the `undo'
     command enough times to get back to the beginning.

`tilde-expand (M-~)'
     Perform tilde expansion on the current word.

`dump-functions ()'
     Print all of the functions and their key bindings to the readline
     output stream.  If a numeric argument is supplied, the output is
     formatted in such a way that it can be made part of an INPUTRC
     file.

`display-shell-version (C-x C-v)'
     Display version information about the current instance of Bash.

`shell-expand-line (M-C-e)'
     Expand the line the way the shell does when it reads it.  This
     performs alias and history expansion as well as all of the shell
     word expansions.

`history-expand-line (M-^)'
     Perform history expansion on the current line.

`insert-last-argument (M-., M-_)'
     A synonym for `yank-last-arg'.

`operate-and-get-next (C-o)'
     Accept the current line for execution and fetch the next line
     relative to the current line from the history for editing.  Any
     argument is ignored.

`emacs-editing-mode (C-e)'
     When in `vi' editing mode, this causes a switch back to emacs
     editing mode, as if the command `set -o emacs' had been executed.


File: features.info,  Node: Readline vi Mode,  Prev: Bindable Readline Commands,  Up: Command Line Editing

Readline vi Mode
================

   While the Readline library does not have a full set of `vi' editing
functions, it does contain enough to allow simple editing of the line.
The Readline `vi' mode behaves as specified in the Posix 1003.2
standard.

   In order to switch interactively between `Emacs' and `Vi' editing
modes, use the `set -o emacs' and `set -o vi' commands (*note The Set
Builtin::).  The Readline default is `emacs' mode.

   When you enter a line in `vi' mode, you are already placed in
`insertion' mode, as if you had typed an `i'.  Pressing <ESC> switches
you into `command' mode, where you can edit the text of the line with
the standard `vi' movement keys, move to previous history lines with
`k', and following lines with `j', and so forth.


File: features.info,  Node: Variable Index,  Next: Concept Index,  Prev: Command Line Editing,  Up: Top

Variable Index
**************

* Menu:

* auto_resume:                           Job Control Variables.
* BASH_VERSION:                          Bash Variables.
* bell-style:                            Readline Init Syntax.
* cdable_vars:                           C Shell Variables.
* CDPATH:                                Bourne Shell Variables.
* comment-begin:                         Readline Init Syntax.
* completion-query-items:                Readline Init Syntax.
* convert-meta:                          Readline Init Syntax.
* editing-mode:                          Readline Init Syntax.
* EUID:                                  Bash Variables.
* expand-tilde:                          Readline Init Syntax.
* FIGNORE:                               Bash Variables.
* histchars:                             Bash Variables.
* HISTCMD:                               Bash Variables.
* HISTCONTROL:                           Bash Variables.
* HISTFILE:                              Bash Variables.
* history_control:                       Bash Variables.
* HISTSIZE:                              Bash Variables.
* HOME:                                  Bourne Shell Variables.
* horizontal-scroll-mode:                Readline Init Syntax.
* HOSTFILE:                              Bash Variables.
* hostname_completion_file:              Bash Variables.
* HOSTTYPE:                              Bash Variables.
* IFS:                                   Bourne Shell Variables.
* IGNOREEOF <1>:                         C Shell Variables.
* IGNOREEOF:                             Bash Variables.
* INPUTRC:                               Bash Variables.
* keymap:                                Readline Init Syntax.
* MAILCHECK:                             Bash Variables.
* MAILPATH:                              Bourne Shell Variables.
* mark-modified-lines:                   Readline Init Syntax.
* meta-flag:                             Readline Init Syntax.
* no_exit_on_failed_exec:                Bash Variables.
* nolinks:                               Bash Variables.
* notify:                                Job Control Variables.
* OLDPWD:                                Korn Shell Variables.
* OPTARG:                                Bourne Shell Variables.
* OPTIND:                                Bourne Shell Variables.
* OSTYPE:                                Bash Variables.
* output-meta:                           Readline Init Syntax.
* PATH:                                  Bourne Shell Variables.
* PROMPT_COMMAND:                        Bash Variables.
* PS1:                                   Bourne Shell Variables.
* PS2:                                   Bourne Shell Variables.
* PS3:                                   Korn Shell Variables.
* PS4:                                   Korn Shell Variables.
* PWD:                                   Korn Shell Variables.
* RANDOM:                                Korn Shell Variables.
* REPLY:                                 Korn Shell Variables.
* SECONDS:                               Korn Shell Variables.
* show-all-if-ambiguous:                 Readline Init Syntax.
* TMOUT:                                 Korn Shell Variables.
* UID:                                   Bash Variables.


File: features.info,  Node: Concept Index,  Prev: Variable Index,  Up: Top

Concept Index
*************

* Menu:

* $else:                                 Conditional Init Constructs.
* $endif:                                Conditional Init Constructs.
* $if:                                   Conditional Init Constructs.
* .:                                     Bourne Shell Builtins.
* ::                                     Bourne Shell Builtins.
* [:                                     Bourne Shell Builtins.
* abort (C-g):                           Miscellaneous Commands.
* accept-line (Newline, Return):         Commands For History.
* alias:                                 Alias Builtins.
* backward-char (C-b):                   Commands For Moving.
* backward-delete-char (Rubout):         Commands For Text.
* backward-kill-line (C-x Rubout):       Commands For Killing.
* backward-kill-word (M-DEL):            Commands For Killing.
* backward-word (M-b):                   Commands For Moving.
* beginning-of-history (M-<):            Commands For History.
* beginning-of-line (C-a):               Commands For Moving.
* bg:                                    Job Control Builtins.
* bind:                                  Bash Builtins.
* break:                                 Bourne Shell Builtins.
* builtin:                               Bash Builtins.
* call-last-kbd-macro (C-x e):           Keyboard Macros.
* capitalize-word (M-c):                 Commands For Text.
* case:                                  Conditional Constructs.
* cd:                                    Bourne Shell Builtins.
* clear-screen (C-l):                    Commands For Moving.
* command:                               Bash Builtins.
* complete (TAB):                        Commands For Completion.
* continue:                              Bourne Shell Builtins.
* declare:                               Bash Builtins.
* delete-char (C-d):                     Commands For Text.
* delete-horizontal-space ():            Commands For Killing.
* digit-argument (M-0, M-1, ... M--):    Numeric Arguments.
* dirs:                                  C Shell Builtins.
* do-uppercase-version (M-a, M-b, ...):  Miscellaneous Commands.
* downcase-word (M-l):                   Commands For Text.
* dump-functions ():                     Miscellaneous Commands.
* echo:                                  Bourne Shell Builtins.
* enable:                                Bash Builtins.
* end-kbd-macro (C-x )):                 Keyboard Macros.
* end-of-history (M->):                  Commands For History.
* end-of-line (C-e):                     Commands For Moving.
* eval:                                  Bourne Shell Builtins.
* event designators:                     Event Designators.
* exec:                                  Bourne Shell Builtins.
* exit:                                  Bourne Shell Builtins.
* expansion:                             History Interaction.
* export:                                Bourne Shell Builtins.
* fc:                                    Korn Shell Builtins.
* fg:                                    Job Control Builtins.
* for:                                   Looping Constructs.
* forward-char (C-f):                    Commands For Moving.
* forward-search-history (C-s):          Commands For History.
* forward-word (M-f):                    Commands For Moving.
* getopts:                               Bourne Shell Builtins.
* hash:                                  Bourne Shell Builtins.
* help:                                  Bash Builtins.
* history:                               C Shell Builtins.
* history events:                        Event Designators.
* History, how to use:                   Job Control Variables.
* history-search-backward ():            Commands For History.
* history-search-forward ():             Commands For History.
* if:                                    Conditional Constructs.
* insert-completions ():                 Commands For Completion.
* interaction, readline:                 Readline Interaction.
* jobs:                                  Job Control Builtins.
* kill:                                  Bourne Shell Builtins.
* Kill ring:                             Readline Killing Commands.
* kill-line (C-k):                       Commands For Killing.
* kill-whole-line ():                    Commands For Killing.
* kill-word (M-d):                       Commands For Killing.
* Killing text:                          Readline Killing Commands.
* let <1>:                               Korn Shell Builtins.
* let:                                   Arithmetic Builtins.
* local:                                 Bash Builtins.
* logout:                                C Shell Builtins.
* next-history (C-n):                    Commands For History.
* non-incremental-forward-search-history (M-n): Commands For History.
* non-incremental-reverse-search-history (M-p): Commands For History.
* popd:                                  C Shell Builtins.
* possible-completions (M-?):            Commands For Completion.
* prefix-meta (ESC):                     Miscellaneous Commands.
* previous-history (C-p):                Commands For History.
* pushd:                                 C Shell Builtins.
* pwd:                                   Bourne Shell Builtins.
* quoted-insert (C-q, C-v):              Commands For Text.
* re-read-init-file (C-x C-r):           Miscellaneous Commands.
* read:                                  Bourne Shell Builtins.
* Readline, how to use:                  Modifiers.
* readonly:                              Bourne Shell Builtins.
* redraw-current-line ():                Commands For Moving.
* return:                                Bourne Shell Builtins.
* reverse-search-history (C-r):          Commands For History.
* revert-line (M-r):                     Miscellaneous Commands.
* self-insert (a, b, A, 1, !, ...):      Commands For Text.
* set:                                   The Set Builtin.
* shift:                                 Bourne Shell Builtins.
* source:                                C Shell Builtins.
* start-kbd-macro (C-x ():               Keyboard Macros.
* suspend:                               Job Control Builtins.
* tab-insert (M-TAB):                    Commands For Text.
* test:                                  Bourne Shell Builtins.
* tilde-expand (M-~):                    Miscellaneous Commands.
* times:                                 Bourne Shell Builtins.
* transpose-chars (C-t):                 Commands For Text.
* transpose-words (M-t):                 Commands For Text.
* trap:                                  Bourne Shell Builtins.
* type:                                  Bash Builtins.
* typeset:                               Korn Shell Builtins.
* ulimit:                                Bash Builtins.
* umask:                                 Bourne Shell Builtins.
* unalias:                               Alias Builtins.
* undo (C-_, C-x C-u):                   Miscellaneous Commands.
* universal-argument ():                 Numeric Arguments.
* unix-line-discard (C-u):               Commands For Killing.
* unix-word-rubout (C-w):                Commands For Killing.
* unset:                                 Bourne Shell Builtins.
* until:                                 Looping Constructs.
* upcase-word (M-u):                     Commands For Text.
* wait:                                  Bourne Shell Builtins.
* while:                                 Looping Constructs.
* yank (C-y):                            Commands For Killing.
* yank-last-arg (M-., M-_):              Commands For History.
* yank-nth-arg (M-C-y):                  Commands For History.
* yank-pop (M-y):                        Commands For Killing.
* Yanking text:                          Readline Killing Commands.



Tag Table:
Node: Top1147
Node: Bourne Shell Features2494
Node: Looping Constructs3668
Node: Conditional Constructs4723
Node: Shell Functions6283
Node: Bourne Shell Builtins7656
Node: Bourne Shell Variables9855
Node: Other Bourne Shell Features11114
Node: Major Differences from the Bourne Shell11872
Node: Csh Features14284
Node: Tilde Expansion15177
Node: Brace Expansion15781
Node: C Shell Builtins17373
Node: C Shell Variables20667
Node: Korn Shell Features21177
Node: Korn Shell Constructs21915
Node: Korn Shell Builtins23126
Node: Korn Shell Variables25277
Node: Aliases26552
Node: Alias Builtins28921
Node: Bash Specific Features29444
Node: Invoking Bash30173
Node: Bash Startup Files32489
Node: Is This Shell Interactive?34332
Node: Bash Builtins35140
Node: The Set Builtin41519
Node: Bash Variables46456
Node: Shell Arithmetic51024
Node: Arithmetic Evaluation51386
Node: Arithmetic Expansion53107
Node: Arithmetic Builtins53941
Node: Printing a Prompt54412
Node: Job Control55677
Node: Job Control Basics56152
Node: Job Control Builtins60326
Node: Job Control Variables61845
Node: Using History Interactively63152
Node: History Interaction63659
Node: Event Designators64705
Node: Word Designators65540
Node: Modifiers66538
Node: Command Line Editing67856
Node: Introduction and Notation68516
Node: Readline Interaction69565
Node: Readline Bare Essentials70708
Node: Readline Movement Commands72252
Node: Readline Killing Commands73165
Node: Readline Arguments74886
Node: Readline Init File75847
Node: Readline Init Syntax76845
Node: Conditional Init Constructs83782
Node: Bindable Readline Commands86028
Node: Commands For Moving86698
Node: Commands For History87546
Node: Commands For Text90190
Node: Commands For Killing91931
Node: Numeric Arguments93380
Node: Commands For Completion94007
Node: Keyboard Macros95020
Node: Miscellaneous Commands95579
Node: Readline vi Mode97670
Node: Variable Index98548
Node: Concept Index101929

End Tag Table
