This is Info file Xlibscm.info, produced by Makeinfo version 1.68 from
the input file Xlibscm.texi.

INFO-DIR-SECTION The Algorithmic Language Scheme
START-INFO-DIR-ENTRY
* Xlibscm: (Xlibscm).   SCM Language X Interface.
END-INFO-DIR-ENTRY


File: Xlibscm.info,  Node: Top,  Next: Xlibscm,  Prev: (dir),  Up: (dir)

This manual documents the X - SCM Language X Interface.  The most recent
information about SCM can be found on SCM's "WWW" home page:

             `http://swissnet.ai.mit.edu/~jaffer/SCM.html'

Copyright (C) 1990-1999 Free Software Foundation

Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.

Permission is granted to copy and distribute modified versions of this
manual under the conditions for verbatim copying, provided that the
entire resulting derived work is distributed under the terms of a
permission notice identical to this one.

Permission is granted to copy and distribute translations of this manual
into another language, under the above conditions for modified versions,
except that this permission notice may be stated in a translation
approved by the author.

* Menu:

* Xlibscm::
* Display::
* Screen::
* Window::
* Window Visibility::
* Graphics Context::
* Cursor::
* Colormap::
* Rendering::
* Event::
* Index::


File: Xlibscm.info,  Node: Xlibscm,  Next: Display,  Prev: Top,  Up: Top

Xlibscm
*******

"Xlibscm" is a SCM interface to "X".  The X Window System is a
network-transparent window system that was designed at MIT.  SCM is a
portable Scheme implementation written in C.  The interface can be
compiled into SCM or, on those platforms supporting dynamic linking,
compiled separately and loaded with `(require 'Xlib)'.

Much of this X documentation is dervied from:

                     Xlib - C Language X Interface

                         X Consortium Standard

                       X Version 11, Release 6.3

The X Window System is a trademark of X Consortium, Inc.

TekHVC is a trademark of Tektronix, Inc.

Copyright (C) 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1994, 1996 X
Consortium

Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to
the following conditions:

The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.

Except as contained in this notice, the name of the X Consortium shall
not be used in advertising or otherwise to promote the sale, use or
other dealings in this Software without prior written authorization from
the X Consortium.

Copyright (C) 1985, 1986, 1987, 1988, 1989, 1990, 1991 by Digital
Equipment Corporation

Portions Copyright (C) 1990, 1991 by Tektronix, Inc.

Permission to use, copy, modify and distribute this documentation for
any purpose and without fee is hereby granted, provided that the above
copyright notice appears in all copies and that both that copyright
notice and this permission notice appear in all copies, and that the
names of Digital and Tektronix not be used in in advertising or
publicity pertaining to this documentation without specific, written
prior permission.  Digital and Tektronix makes no representations about
the suitability of this documentation for any purpose.  It is provided
"as is" without express or implied warranty.


File: Xlibscm.info,  Node: Display,  Next: Screen,  Prev: Xlibscm,  Up: Top

Display
*******

 - Function: x:open-display DISPLAY-NAME
     DISPLAY-NAME Specifies the hardware display name, which determines
     the display and communications domain to be used.  On a
     POSIX-conformant system, if the display-name is #f, it defaults to
     the value of the DISPLAY environment variable.

     The encoding and interpretation of DISPLAY-NAME is
     implementation-dependent.  On POSIX-conformant systems, the
     DISPLAY-NAME or DISPLAY environment variable can be a string in
     the format:

      - Special Form: hostname:number.screen-number
          HOSTNAME specifies the name of the host machine on which the
          display is physically attached.  Follow the HOSTNAME with
          either a single colon (:) or a double colon (::).

          NUMBER specifies the number of the display server on that host
          machine.  You may optionally follow this display number with
          a period (.).  A single CPU can have more than one display.
          Multiple displays are usually numbered starting with zero.

          SCREEN-NUMBER specifies the screen to be used on that server.
          Multiple screens can be controlled by a single X server.  The
          SCREEN-NUMBER sets an internal variable that can be accessed
          by using the x:default-screen procedure.

 - Function: x:close DISPLAY
     DISPLAY specifies the connection to the X server.

     The `x:close' function closes the connection to the X server for
     the DISPLAY specified and destroys all windows, resource IDs
     (Window, Font, Pixmap, Colormap, Cursor, and GContext), or other
     resources that the client has created on this display, unless the
     close-down mode of the resource has been changed (see
     `x:set-close-down-mode').  Therefore, these windows, resource IDs,
     and other resources should not be used again or an error will be
     generated.  Before exiting, you should call X:CLOSE-DISPLAY or
     X:FLUSH explicitly so that any pending errors are reported.

 - Function: x:protocol-version DISPLAY
     Returns cons of the major version number (11) of the X protocol
     associated with the connected DISPLAY and the minor protocol
     revision number of the X server.

 - Function: x:server-vendor DISPLAY
     Returns a string that provides some identification of the owner of
     the X server implementation.  The contents of the string are
     implementation-dependent.

 - Function: x:vendor-release DISPLAY
     Returns a number related to a vendor's release of the X server.


File: Xlibscm.info,  Node: Screen,  Next: Window,  Prev: Display,  Up: Top

Screen
******

A display consists of one or more "Screen"s.  Each screen has a
"root-window", "default-graphics-context", "default-visual", and
"colormap".

 - Function: x:screen-count DISPLAY
     Returns the number of available screens.

 - Function: x:default-screen DISPLAY
     Returns the default screen number specified by the `x:open-display'
     function.  Use this screen number in applications which will use
     only a single screen.

 - Function: x:root-window DISPLAY SCREEN-NUMBER
 - Function: x:root-window DISPLAY
     SCREEN-NUMBER, if givien, specifies the appropriate screen number
     on the host server.  Otherwise the default-screen for DISPLAY is
     used.

     Returns the root window for the specified SCREEN-NUMBER.  Use
     `x:root-window' for functions that need a drawable of a particular
     screen or for creating top-level windows.

 - Function: x:root-window WINDOW
     Returns the root window for the specified WINDOW's screen.

 - Function: x:default-colormap DISPLAY SCREEN-NUMBER
 - Function: x:default-colormap DISPLAY
 - Function: x:default-colormap WINDOW
     Returns the default colormap of the specified screen.

 - Function: x:default-gc DISPLAY SCREEN-NUMBER
 - Function: x:default-gc DISPLAY
 - Function: x:default-gc WINDOW
     Returns the default graphics-context of the specified screen.

 - Function: x:default-depths DISPLAY SCREEN-NUMBER
 - Function: x:default-depths DISPLAY
 - Function: x:default-depths WINDOW
     Returns a vector of depths supported by the specified screen.

The "Visual" type describes possible colormap depths and arrangements.

 - Function: x:default-visual DISPLAY SCREEN-NUMBER
 - Function: x:default-visual DISPLAY
 - Function: x:default-visual WINDOW
     Returns the default Visual type for the specified screen.


 - Function: x:make-visual DISPLAY DEPTH CLASS
 - Function: x:make-visual WINDOW DEPTH CLASS
     The integer DEPTH specifies the number of bits per pixel.  The
     CLASS argument specifies one of the possible visual classes for a
     screen:
        * x:Static-Gray

        * x:Static-Color

        * x:True-Color

        * x:Gray-Scale

        * x:Pseudo-Color

        * x:Direct-Color

     `X:make-visual' returns a visual type for the screen specified by
     DISPLAY or WINDOW if successful; #f if not.


 - Function: x:screen-cells DISPLAY SCREEN-NUMBER
 - Function: x:screen-cells DISPLAY
 - Function: x:screen-cells WINDOW
     Returns the number of entries in the default colormap.

 - Function: x:screen-depth DISPLAY SCREEN-NUMBER
 - Function: x:screen-depth DISPLAY
 - Function: x:screen-depth WINDOW
     Returns the depth of the root window of the specified screen.

     The "depth" of a window or pixmap is the number of bits per pixel
     it has.  The "depth" of a graphics context is the depth of the
     drawables it can be used in conjunction with graphics output.

 - Function: x:screen-size DISPLAY SCREEN-NUMBER
 - Function: x:screen-size DISPLAY
 - Function: x:screen-size WINDOW
     Returns a list of integer height and width of the screen in pixels.

 - Function: x:screen-dimensions DISPLAY SCREEN-NUMBER
 - Function: x:screen-dimensions DISPLAY
 - Function: x:screen-dimensions WINDOW
     Returns a list of integer height and width of the screen in
     millimeters.

 - Function: x:screen-white DISPLAY SCREEN-NUMBER
 - Function: x:screen-white DISPLAY
 - Function: x:screen-white WINDOW
     Returns the white pixel value of the specified screen.

 - Function: x:screen-black DISPLAY SCREEN-NUMBER
 - Function: x:screen-black DISPLAY
 - Function: x:screen-black WINDOW
     Returns the black pixel value of the specified screen.


File: Xlibscm.info,  Node: Window,  Next: Window Visibility,  Prev: Screen,  Up: Top

Window
******

A "Drawable" is either a window or pixmap.

 - Function: x:create-window WINDOW POSITION SIZE BORDER-WIDTH DEPTH
          CLASS VISUAL FIELD-NAME VALUE ...
     Creates and returns an unmapped Input-Output subwindow for a
     specified parent WINDOW and causes the X server to generate a
     CreateNotify event.  The created window is placed on top in the
     stacking order with respect to siblings.  Any part of the window
     that extends outside its parent WINDOW is clipped.  The
     BORDER-WIDTH for an x:Input-Only window must be zero.

     The coordinate system has the X axis horizontal and the Y axis
     vertical with the origin [0, 0] at the upper-left corner.
     Coordinates are integral, in terms of pixels, and coincide with
     pixel centers.  Each window and pixmap has its own coordinate
     system.  For a window, the origin is inside the border at the
     inside, upper-left corner.

     CLASS can be x:Input-Output, x:Input-Only, or x:Copy-From-Parent.
     For class x:Input-Output, the VISUAL type and DEPTH must be a
     combination supported for the screen.  The DEPTH need not be the
     same as the parent, but the parent must not be a window of class
     x:Input-Only.  For an x:Input-Only window, the DEPTH must be zero,
     and the VISUAL must be one supported by the screen.

     The returned window will have the attributes specified by
     FIELD-NAMEs and VALUE.

 - Function: x:create-window WINDOW POSITION SIZE BORDER-WIDTH BORDER
          BACKGROUND
     The returned window inherits its depth, class, and visual from its
     parent.  All other window attributes, except BACKGROUND and
     BORDER, have their default values.

 - Function: x:create-pixmap DRAWABLE SIZE DEPTH
 - Function: x:create-pixmap DISPLAY SIZE DEPTH
     SIZE is a list, vector, or pair of nonzero integers specifying the
     width and height desired in the new pixmap.

     X:CREATE-PIXMAP returns a new pixmap of the width, height, and
     DEPTH specified.  It is valid to pass an x:Input-Only window to the
     drawable argument.  The DEPTH argument must be one of the depths
     supported by the screen of the specified DRAWABLE.

 - Function: x:close WINDOW
     Destroys the specified WINDOW as well as all of its subwindows and
     causes the X server to generate a DestroyNotify event for each
     window.  The window should not be used again.  If the window
     specified by the WINDOW argument is mapped, it is unmapped
     automatically.  The ordering of the DestroyNotify events is such
     that for any given window being destroyed, DestroyNotify is
     generated on any inferiors of the window before being generated on
     the window itself.  The ordering among siblings and across
     subhierarchies is not otherwise constrained.  If the WINDOW you
     specified is a root window, an error is signaled.  Destroying a
     mapped WINDOW will generate x:Expose events on other windows that
     were obscured by the window being destroyed.

 - Function: x:close PIXMAP
     Deletes the association between the PIXMAP and its storage.  The X
     server frees the pixmap storage when there are no references to it.

 - Function: x:window-geometry DRAWABLE
     Returns a list of:

    coordinates
          `cons' of x and y coordinates that define the location of the
          DRAWABLE.  For a window, these coordinates specify the
          upper-left outer corner relative to its parent's origin.  For
          pixmaps, these coordinates are always zero.

    size
          `cons' of the DRAWABLE's dimensions (width and height).  For
          a window, these dimensions specify the inside size, not
          including the border.

    border-width
          The border width in pixels.  If the DRAWABLE is a pixmap,
          this is zero.

    depth
          The depth of the DRAWABLE (bits per pixel for the object).

 - Function: x:window-set! WINDOW FIELD-NAME VALUE ...
     Changes the components specified by FIELD-NAMEs for the specified
     WINDOW.  The restrictions are the same as for `x:create-window'.
     The order in which components are verified and altered is server
     dependent.  If an error occurs, a subset of the components may
     have been altered.

Window Attributes
=================

The `x:create-window' and `x:window-set!' procedures take five and one
argument (respectively) followed by pairs of arguments, where the first
is one of the property-name symbols (or its top-level value) listed
below; and the second is the value to associate with that property.

 - Attribute: x:CW-Back-Pixmap
     Sets the background pixmap of the WINDOW to the specified pixmap.
     The background pixmap can immediately be freed if no further
     explicit references to it are to be made.  If x:Parent-Relative is
     specified, the background pixmap of the window's parent is used,
     or on the root window, the default background is restored.  It is
     an error to perform this operation on an x:Input-Only window.  If
     the background is set to #f or None, the window has no defined
     background.

 - Attribute: x:CW-Back-Pixel
     Sets the background of the WINDOW to the specified pixel value.
     Changing the background does not cause the WINDOW contents to be
     changed.  It is an error to perform this operation on an
     x:Input-Only window.

 - Attribute: x:CW-Border-Pixmap
     Sets the border pixmap of the WINDOW to the pixmap you specify.
     The border pixmap can be freed if no further explicit references
     to it are to be made.  If you specify x:Copy-From-Parent, a copy
     of the parent window's border pixmap is used.  It is an error to
     perform this operation on an x:Input-Only WINDOW.

 - Attribute: x:CW-Border-Pixel
     Sets the border of the WINDOW to the pixel VALUE.  It is an error
     to perform this operation on an x:Input-Only window.

 - Attribute: x:CW-Bit-Gravity
 - Attribute: x:CW-Win-Gravity
     The bit gravity of a window defines which region of the window
     should be retained when an x:Input-Output window is resized.  The
     default value for the bit-gravity attribute is x:Forget-Gravity.
     The window gravity of a window allows you to define how the
     x:Input-Output or x:Input-Only window should be repositioned if
     its parent is resized.  The default value for the win-gravity
     attribute is x:North-West-Gravity.

     If the inside width or height of a window is not changed and if the
     window is moved or its border is changed, then the contents of the
     window are not lost but move with the window.  Changing the inside
     width or height of the window causes its contents to be moved or
     lost (depending on the bit-gravity of the window) and causes
     children to be reconfigured (depending on their win-gravity).  For
     a change of width and height, the (x, y) pairs are defined:

     Gravity Direction                  Coordinates                        
     x:North-West-Gravity               (0, 0)                             
     x:North-Gravity                    (Width/2, 0)                       
     x:North-East-Gravity               (Width, 0)                         
     x:West-Gravity                     (0, Height/2)                      
     x:Center-Gravity                   (Width/2, Height/2)                
     x:East-Gravity                     (Width, Height/2)                  
     x:South-West-Gravity               (0, Height)                        
     x:South-Gravity                    (Width/2, Height)                  
     x:South-East-Gravity               (Width, Height)                    

     When a window with one of these bit-gravity values is resized, the
     corresponding pair defines the change in position of each pixel in
     the window.  When a window with one of these win-gravities has its
     parent window resized, the corresponding pair defines the change
     in position of the window within the parent.  When a window is so
     repositioned, a x:Gravity-Notify event is generated (see section
     10.10.5).

     A bit-gravity of x:Static-Gravity indicates that the contents or
     origin should not move relative to the origin of the root window.
     If the change in size of the window is coupled with a change in
     position (x, y), then for bit-gravity the change in position of
     each pixel is (-x, -y), and for win-gravity the change in position
     of a child when its parent is so resized is (-x, -y).  Note that
     x:Static-Gravity still only takes effect when the width or height
     of the window is changed, not when the window is moved.

     A bit-gravity of x:Forget-Gravity indicates that the window's
     contents are always discarded after a size change, even if a
     backing store or save under has been requested.  The window is
     tiled with its background and zero or more x:Expose events are
     generated.  If no background is defined, the existing screen
     contents are not altered.  Some X servers may also ignore the
     specified bit-gravity and always generate x:Expose events.

     The contents and borders of inferiors are not affected by their
     parent's bit-gravity.  A server is permitted to ignore the
     specified bit-gravity and use x:Forget-Gravity instead.

     A win-gravity of x:Unmap-Gravity is like x:North-West-Gravity (the
     window is not moved), except the child is also unmapped when the
     parent is resized, and an x:Unmap-Notify event is generated.

 - Attribute: x:CW-Backing-Store
     Some implementations of the X server may choose to maintain the
     contents of x:Input-Output windows.  If the X server maintains the
     contents of a window, the off-screen saved pixels are known as
     backing store.  The backing store advises the X server on what to
     do with the contents of a window.  The backing-store attribute can
     be set to x:Not-Useful (default), x:When-Mapped, or x:Always.  A
     backing-store attribute of x:Not-Useful advises the X server that
     maintaining contents is unnecessary, although some X
     implementations may still choose to maintain contents and,
     therefore, not generate x:Expose events.  A backing-store
     attribute of x:When-Mapped advises the X server that maintaining
     contents of obscured regions when the window is mapped would be
     beneficial.  In this case, the server may generate an x:Expose
     event when the window is created.  A backing-store attribute of
     x:Always advises the X server that maintaining contents even when
     the window is unmapped would be beneficial.  Even if the window is
     larger than its parent, this is a request to the X server to
     maintain complete contents, not just the region within the parent
     window boundaries.  While the X server maintains the window's
     contents, x:Expose events normally are not generated, but the X
     server may stop maintaining contents at any time.

     When the contents of obscured regions of a window are being
     maintained, regions obscured by noninferior windows are included
     in the destination of graphics requests (and source, when the
     window is the source).  However, regions obscured by inferior
     windows are not included.

 - Attribute: x:CW-Backing-Planes
 - Attribute: x:CW-Backing-Pixel
     You can set backing planes to indicate (with bits set to 1) which
     bit planes of an x:Input-Output window hold dynamic data that must
     be preserved in backing store and during save unders.  The default
     value for the backing-planes attribute is all bits set to 1.  You
     can set backing pixel to specify what bits to use in planes not
     covered by backing planes.  The default value for the
     backing-pixel attribute is all bits set to 0.  The X server is
     free to save only the specified bit planes in the backing store or
     the save under and is free to regenerate the remaining planes with
     the specified pixel value.  Any extraneous bits in these values
     (that is, those bits beyond the specified depth of the window) may
     be simply ignored.  If you request backing store or save unders,
     you should use these members to minimize the amount of off-screen
     memory required to store your window.

 - Attribute: x:CW-Override-Redirect
     To control window placement or to add decoration, a window manager
     often needs to intercept (redirect) any map or configure request.
     Pop-up windows, however, often need to be mapped without a window
     manager getting in the way.  To control whether an x:Input-Output
     or x:Input-Only window is to ignore these structure control
     facilities, use the override-redirect flag.

     The override-redirect flag specifies whether map and configure
     requests on this window should override a
     x:Substructure-Redirect-Mask on the parent.  You can set the
     override-redirect flag to #t or #f (default).  Window managers use
     this information to avoid tampering with pop-up windows.

 - Attribute: x:CW-Save-Under
     Some server implementations may preserve contents of
     x:Input-Output windows under other x:Input-Output windows.  This
     is not the same as preserving the contents of a window for you.
     You may get better visual appeal if transient windows (for
     example, pop-up menus) request that the system preserve the screen
     contents under them, so the temporarily obscured applications do
     not have to repaint.

     You can set the save-under flag to True or False (default).  If
     save-under is True, the X server is advised that, when this window
     is mapped, saving the contents of windows it obscures would be
     beneficial.

 - Attribute: x:CW-Event-Mask
     The event mask defines which events the client is interested in
     for this x:Input-Output or x:Input-Only window (or, for some event
     types, inferiors of this window).  The event mask is the bitwise
     inclusive OR of zero or more of the valid event mask bits.  You
     can specify that no maskable events are reported by setting
     x:No-Event-Mask (default).

     The following table lists the event mask constants you can pass to
     the event-mask argument and the circumstances in which you would
     want to specify the event mask:

     Event Mask                     Circumstances                         
     x:No-Event-Mask                No events wanted                      
     x:Key-Press-Mask               Keyboard down events wanted           
     x:Key-Release-Mask             Keyboard up events wanted             
     x:Button-Press-Mask            Pointer button down events wanted     
     x:Button-Release-Mask          Pointer button up events wanted       
     x:Enter-Window-Mask            Pointer window entry events wanted    
     x:Leave-Window-Mask            Pointer window leave events wanted    
     x:Pointer-Motion-Mask          Pointer motion events wanted          
     x:Pointer-Motion-Hint-Mask     If x:Pointer-Motion-Hint-Mask is      
                                    selected in combination with one or   
                                    more motion-masks, the X server is    
                                    free to send only one x:Motion-Notify 
                                    event (with the is_hint member of     
                                    the X:Pointer-Moved-Event structure   
                                    set to x:Notify-Hint) to the client   
                                    for the event window, until either    
                                    the key or button state changes, the  
                                    pointer leaves the event window, or   
                                    the client calls X:Query-Pointer or   
                                    X:Get-Motion-Events.  The server      
                                    still may send x:Motion-Notify        
                                    events without is_hint set to         
                                    x:Notify-Hint.                        
     x:Button1-Motion-Mask          Pointer motion while button 1 down    
     x:Button2-Motion-Mask          Pointer motion while button 2 down    
     x:Button3-Motion-Mask          Pointer motion while button 3 down    
     x:Button4-Motion-Mask          Pointer motion while button 4 down    
     x:Button5-Motion-Mask          Pointer motion while button 5 down    
     x:Button-Motion-Mask           Pointer motion while any button down  
     x:Keymap-State-Mask            Keyboard state wanted at window       
                                    entry and focus in                    
     x:Exposure-Mask                Any exposure wanted                   
     x:Visibility-Change-Mask       Any change in visibility wanted       
     x:Structure-Notify-Mask        Any change in window structure wanted 
     x:Resize-Redirect-Mask         Redirect resize of this window        
     x:Substructure-Notify-Mask     Substructure notification wanted      
     x:Substructure-Redirect-Mask   Redirect structure requests on        
                                    children                              
     x:Focus-Change-Mask            Any change in input focus wanted      
     x:Property-Change-Mask         Any change in property wanted         
     x:Colormap-Change-Mask         Any change in colormap wanted         
     x:Owner-Grab-Button-Mask       Automatic grabs should activate with  
                                    owner_events set to True              

 - Attribute: x:CW-Dont-Propagate
     The do-not-propagate-mask attribute defines which events should
     not be propagated to ancestor windows when no client has the event
     type selected in this x:Input-Output or x:Input-Only window.  The
     do-not-propagate-mask is the bitwise inclusive OR of zero or more
     of the following masks: x:Key-Press, x:Key-Release, x:Button-Press,
     x:Button-Release, x:Pointer-Motion, x:Button1Motion,
     x:Button2Motion, x:Button3Motion, x:Button4Motion,
     x:Button5Motion, and x:Button-Motion.  You can specify that all
     events are propagated by setting x:No-Event-Mask (default).

 - Attribute: x:CW-Colormap
     The colormap attribute specifies which colormap best reflects the
     true colors of the x:Input-Output window.  The colormap must have
     the same visual type as the window.  X servers capable of
     supporting multiple hardware colormaps can use this information,
     and window managers can use it for calls to X:Install-Colormap.
     You can set the colormap attribute to a colormap or to
     x:Copy-From-Parent (default).

     If you set the colormap to x:Copy-From-Parent, the parent window's
     colormap is copied and used by its child.  However, the child
     window must have the same visual type as the parent.  The parent
     window must not have a colormap of x:None.  The colormap is copied
     by sharing the colormap object between the child and parent, not
     by making a complete copy of the colormap contents.  Subsequent
     changes to the parent window's colormap attribute do not affect
     the child window.

 - Attribute: x:CW-Cursor
     The cursor attribute specifies which cursor is to be used when the
     pointer is in the x:Input-Output or x:Input-Only window.  You can
     set the cursor to a cursor or x:None (default).

     If you set the cursor to x:None, the parent's cursor is used when
     the pointer is in the x:Input-Output or x:Input-Only window, and
     any change in the parent's cursor will cause an immediate change
     in the displayed cursor.  On the root window, the default cursor
     is restored.


File: Xlibscm.info,  Node: Window Visibility,  Next: Graphics Context,  Prev: Window,  Up: Top

Window Visibility
*****************

In X parlance, a window which is hidden even when not obscured by other
windows is "unmapped"; one which shows is "mapped".  It is an
unfortunate name-collision with Scheme, and is ingrained in the
attribute names.

 - Function: x:map-window WINDOW
     Maps the WINDOW and all of its subwindows that have had map
     requests.  Mapping a window that has an unmapped ancestor does not
     display the window but marks it as eligible for display when the
     ancestor becomes mapped.  Such a window is called unviewable.
     When all its ancestors are mapped, the window becomes viewable and
     will be visible on the screen if it is not obscured by another
     window.  This function has no effect if the WINDOW is already
     mapped.

     If the override-redirect of the window is False and if some other
     client has selected x:Substructure-Redirect-Mask on the parent
     window, then the X server generates a MapRequest event, and the
     `x:map-window' function does not map the WINDOW.  Otherwise, the
     WINDOW is mapped, and the X server generates a MapNotify event.

     If the WINDOW becomes viewable and no earlier contents for it are
     remembered, the X server tiles the WINDOW with its background.  If
     the window's background is undefined, the existing screen contents
     are not altered, and the X server generates zero or more x:Expose
     events.  If backing-store was maintained while the WINDOW was
     unmapped, no x:Expose events are generated.  If backing-store will
     now be maintained, a full-window exposure is always generated.
     Otherwise, only visible regions may be reported.  Similar tiling
     and exposure take place for any newly viewable inferiors.

     If the window is an Input-Output window, `x:map-window' generates
     x:Expose events on each Input-Output window that it causes to be
     displayed.  If the client maps and paints the window and if the
     client begins processing events, the window is painted twice.  To
     avoid this, first ask for x:Expose events and then map the window,
     so the client processes input events as usual.  The event list
     will include x:Expose for each window that has appeared on the
     screen.  The client's normal response to an x:Expose event should
     be to repaint the window.  This method usually leads to simpler
     programs and to proper interaction with window managers.

 - Function: x:map-raised WINDOW
     This procedure is similar to `x:map-window' in that it maps the
     WINDOW and all of its subwindows that have had map requests.
     However, it also raises the specified WINDOW to the top of the
     stack.

 - Function: x:map-subwindows WINDOW
     Maps all subwindows of a specified WINDOW in top-to-bottom
     stacking order.  The X server generates x:Expose events on each
     newly displayed window.  This may be much more efficient than
     mapping many windows one at a time because the server needs to
     perform much of the work only once, for all of the windows, rather
     than for each window.

 - Function: x:unmap-window WINDOW
     Unmaps the specified WINDOW and causes the X server to generate an
     UnmapNotify event.  If the specified WINDOW is already unmapped,
     `x:unmap-window' has no effect.  Normal exposure processing on
     formerly obscured windows is performed.  Any child window will no
     longer be visible until another map call is made on the parent.
     In other words, the subwindows are still mapped but are not
     visible until the parent is mapped.  Unmapping a WINDOW will
     generate x:Expose events on windows that were formerly obscured by
     it.

 - Function: x:unmap-subwindows WINDOW
     Unmaps all subwindows for the specified WINDOW in bottom-to-top
     stacking order.  It causes the X server to generate an UnmapNotify
     event on each subwindow and x:Expose events on formerly obscured
     windows.  Using this function is much more efficient than
     unmapping multiple windows one at a time because the server needs
     to perform much of the work only once, for all of the windows,
     rather than for each window.


File: Xlibscm.info,  Node: Graphics Context,  Next: Cursor,  Prev: Window Visibility,  Up: Top

Graphics Context
****************

Most attributes of graphics operations are stored in "GC"s.  These
include line width, line style, plane mask, foreground, background,
tile, stipple, clipping region, end style, join style, and so on.
Graphics operations (for example, drawing lines) use these values to
determine the actual drawing operation.

 - Function: x:create-gc DRAWABLE FIELD-NAME VALUE ...
     Creates and returns graphics context.  The graphics context can be
     used with any destination drawable having the same root and depth
     as the specified DRAWABLE.

 - Function: x:gc-set! GRAPHICS-CONTEXT FIELD-NAME VALUE ...
     Changes the components specified by FIELD-NAMEs for the specified
     GRAPHICS-CONTEXT.  The restrictions are the same as for
     `x:create-gc'.  The order in which components are verified and
     altered is server dependent.  If an error occurs, a subset of the
     components may have been altered.

 - Function: x:copy-gc-fields! GCONTEXT-SRC GCONTEXT-DST FIELD-NAME ...
     Copies the components specified by FIELD-NAMEs from GCONTEXT-SRC
     to GCONTEXT-DST.  GCONTEXT-SRC and GCONTEXT-DST must have the same
     root and depth.

 - Function: x:gc-ref GRAPHICS-CONTEXT FIELD-NAME ...
     Returns a list of the components specified by FIELD-NAMEs ...
     from the specified GRAPHICS-CONTEXT.

GC Attributes
=============

Both `x:create-gc' and `x:change-gc' take one argument followed by
pairs of arguments, where the first is one of the property-name symbols
(or its top-level value) listed below; and the second is the value to
associate with that property.

 - Attribute: x:GC-Function
     The function attributes of a GC are used when you update a section
     of a drawable (the destination) with bits from somewhere else (the
     source).  The function in a GC defines how the new destination
     bits are to be computed from the source bits and the old
     destination bits.  x:G-Xcopy is typically the most useful because
     it will work on a color display, but special applications may use
     other functions, particularly in concert with particular planes of
     a color display.  The 16 functions are:


     x:G-Xclear           0
     x:G-Xand             (AND src dst)
     x:G-Xand-Reverse     (AND src (NOT dst))
     x:G-Xcopy            src
     x:G-Xand-Inverted    (AND (NOT src) dst)
     x:G-Xnoop            dst
     x:G-Xxor             (XOR src dst)
     x:G-Xor              (OR src dst)
     x:G-Xnor             (AND (NOT src) (NOT dst))
     x:G-Xequiv           (XOR (NOT src) dst)
     x:G-Xinvert          (NOT dst)
     x:G-Xor-Reverse      (OR src (NOT dst))
     x:G-Xcopy-Inverted   (NOT src)
     x:G-Xor-Inverted     (OR (NOT src) dst)
     x:G-Xnand            (OR (NOT src) (NOT dst))
     x:G-Xset             1

 - Attribute: x:GC-Plane-Mask
     Many graphics operations depend on either pixel values or planes
     in a GC.  The planes attribute is an integer which specifies which
     planes of the destination are to be modified, one bit per plane.
     A monochrome display has only one plane and will be the least
     significant bit of the integer.  As planes are added to the
     display hardware, they will occupy more significant bits in the
     plane mask.

     In graphics operations, given a source and destination pixel, the
     result is computed bitwise on corresponding bits of the pixels.
     That is, a Boolean operation is performed in each bit plane.  The
     plane-mask restricts the operation to a subset of planes.
     `x:All-Planes' can be used to refer to all planes of the screen
     simultaneously.  The result is computed by the following:

     (OR (AND (FUNC src dst) plane-mask) (AND dst (NOT plane-mask)))

     Range checking is not performed on a plane-mask value.  It is
     simply truncated to the appropriate number of bits.

 - Attribute: x:GC-Foreground
 - Attribute: x:GC-Background
     Range checking is not performed on the values for foreground or
     background.  They are simply truncated to the appropriate number of
     bits.

     Note that foreground and background are not initialized to any
     values likely to be useful in a window.

 - Attribute: x:GC-Line-Width
     The line-width is measured in pixels and either can be greater
     than or equal to one (wide line) or can be the special value zero
     (thin line).

     Thin lines (zero line-width) are one-pixel-wide lines drawn using
     an unspecified, device-dependent algorithm.  There are only two
     constraints on this algorithm.

        * If a line is drawn unclipped from [x1,y1] to [x2,y2] and if
          another line is drawn unclipped from [x1+dx,y1+dy] to
          [x2+dx,y2+dy], a point [x,y] is touched by drawing the first
          line if and only if the point [x+dx,y+dy] is touched by
          drawing the second line.

        * The effective set of points comprising a line cannot be
          affected by clipping.  That is, a point is touched in a
          clipped line if and only if the point lies inside the
          clipping region and the point would be touched by the line
          when drawn unclipped.

     A wide line drawn from [x1,y1] to [x2,y2] always draws the same
     pixels as a wide line drawn from [x2,y2] to [x1,y1], not counting
     cap-style and join-style.  It is recommended that this property be
     true for thin lines, but this is not required.  A line-width of
     zero may differ from a line-width of one in which pixels are
     drawn.  This permits the use of many manufacturers' line drawing
     hardware, which may run many times faster than the more precisely
     specified wide lines.

     In general, drawing a thin line will be faster than drawing a wide
     line of width one.  However, because of their different drawing
     algorithms, thin lines may not mix well aesthetically with wide
     lines.  If it is desirable to obtain precise and uniform results
     across all displays, a client should always use a line-width of
     one rather than a linewidth of zero.

 - Attribute: x:GC-Line-Style
     The line-style defines which sections of a line are drawn:

    x:Line-Solid
          The full path of the line is drawn.

    x:Line-Double-Dash
          The full path of the line is drawn, but the even dashes are
          filled differently from the odd dashes (see fill-style) with
          x:Cap-Butt style used where even and odd dashes meet.

    x:Line-On-Off-Dash
          Only the even dashes are drawn, and cap-style applies to all
          internal ends of the individual dashes, except x:Cap-Not-Last
          is treated as x:Cap-Butt.

 - Attribute: x:GC-Cap-Style
     The cap-style defines how the endpoints of a path are drawn:

    x:Cap-Not-Last
          This is equivalent to x:Cap-Butt except that for a line-width
          of zero the final endpoint is not drawn.

    x:Cap-Butt
          The line is square at the endpoint (perpendicular to the
          slope of the line) with no projection beyond.

    x:Cap-Round
          The line has a circular arc with the diameter equal to the
          line-width, centered on the endpoint.  (This is equivalent to
          x:Cap-Butt for line-width of zero).

    x:Cap-Projecting
          The line is square at the end, but the path continues beyond
          the endpoint for a distance equal to half the line-width.
          (This is equivalent to x:Cap-Butt for line-width of zero).

 - Attribute: x:GC-Join-Style
     The join-style defines how corners are drawn for wide lines:

    x:Join-Miter
          The outer edges of two lines extend to meet at an angle.
          However, if the angle is less than 11 degrees, then a
          x:Join-Bevel join-style is used instead.

    x:Join-Round
          The corner is a circular arc with the diameter equal to the
          line-width, centered on the x:Join-point.

    x:Join-Bevel
          The corner has x:Cap-Butt endpoint styles with the triangular
          notch filled.

 - Attribute: x:GC-Fill-Style
     The fill-style defines the contents of the source for line, text,
     and fill requests.  For all text and fill requests (for example,
     X:Draw-Text, X:Fill-Rectangle, X:Fill-Polygon, and X:Fill-Arc);
     for line requests with linestyle x:Line-Solid (for example,
     X:Draw-Line, X:Draw-Segments, X:Draw-Rectangle, X:Draw-Arc); and
     for the even dashes for line requests with line-style
     x:Line-On-Off-Dash or x:Line-Double-Dash, the following apply:

    x:Fill-Solid
          Foreground

    x:Fill-Tiled
          Tile

    x:Fill-Opaque-Stippled
          A tile with the same width and height as stipple, but with
          background everywhere stipple has a zero and with foreground
          everywhere stipple has a one

    x:Fill-Stippled
          Foreground masked by stipple

     When drawing lines with line-style x:Line-Double-Dash, the odd
     dashes are controlled by the fill-style in the following manner:

    x:Fill-Solid
          Background

    x:Fill-Tiled
          Same as for even dashes

    x:Fill-Opaque-Stippled
          Same as for even dashes

    x:Fill-Stippled
          Background masked by stipple

 - Attribute: x:GC-Fill-Rule
     The fill-rule defines what pixels are inside (drawn) for paths
     given in X:Fill-Polygon requests and can be set to x:Even-Odd-Rule
     or x:Winding-Rule.

    x:Even-Odd-Rule
          A point is inside if an infinite ray with the point as origin
          crosses the path an odd number of times.

    x:Winding-Rule
          A point is inside if an infinite ray with the point as origin
          crosses an unequal number of clockwise and counterclockwise
          directed path segments.

     A clockwise directed path segment is one that crosses the ray from
     left to right as observed from the point.  A counterclockwise
     segment is one that crosses the ray from right to left as observed
     from the point.  The case where a directed line segment is
     coincident with the ray is uninteresting because you can simply
     choose a different ray that is not coincident with a segment.

     For both x:Even-Odd-Rule and x:Winding-Rule, a point is infinitely
     small, and the path is an infinitely thin line.  A pixel is inside
     if the center point of the pixel is inside and the center point is
     not on the boundary.  If the center point is on the boundary, the
     pixel is inside if and only if the polygon interior is immediately
     to its right (x increasing direction).  Pixels with centers on a
     horizontal edge are a special case and are inside if and only if
     the polygon interior is immediately below (y increasing direction).

 - Attribute: x:GC-Tile
 - Attribute: x:GC-Stipple
     The tile/stipple represents an infinite two-dimensional plane,
     with the tile/stipple replicated in all dimensions.

     The tile pixmap must have the same root and depth as the GC, or an
     error results.  The stipple pixmap must have depth one and must
     have the same root as the GC, or an error results.  For stipple
     operations where the fill-style is x:Fill-Stippled but not
     x:Fill-Opaque-Stippled, the stipple pattern is tiled in a single
     plane and acts as an additional clip mask to be ANDed with the
     clip-mask.  Although some sizes may be faster to use than others,
     any size pixmap can be used for tiling or stippling.

 - Attribute: x:GC-Tile-Stip-X-Origin
 - Attribute: x:GC-Tile-Stip-Y-Origin
     When the tile/stipple plane is superimposed on a drawable for use
     in a graphics operation, the upper-left corner of some instance of
     the tile/stipple is at the coordinates within the drawable
     specified by the tile/stipple origin.  The tile/stipple origin is
     interpreted relative to the origin of whatever destination
     drawable is specified in a graphics request.

 - Attribute: x:GC-Font
     The font to be used for drawing text.

 - Attribute: x:GC-Subwindow-Mode
     You can set the subwindow-mode to x:Clip-By-Children or
     x:Include-Inferiors.
    x:Clip-By-Children
          Both source and destination windows are additionally clipped
          by all viewable Input-Output children.

    x:Include-Inferiors
          Neither source nor destination window is clipped by
          inferiors.  This will result in including subwindow contents
          in the source and drawing through subwindow boundaries of the
          destination.  The use of `x:Include-Inferiors' on a window of
          one depth with mapped inferiors of differing depth is not
          illegal, but the semantics are undefined by the core protocol.

 - Attribute: x:GC-Graphics-Exposures
     The graphics-exposure flag controls x:Graphics-Expose event
     generation for X:Copy-Area and X:Copy-Plane requests (and any
     similar requests defined by extensions).

 - Attribute: x:GC-Clip-X-Origin
 - Attribute: x:GC-Clip-Y-Origin
     The clip-mask origin is interpreted relative to the origin of
     whatever destination drawable is specified in a graphics request.

 - Attribute: x:GC-Clip-Mask
     The clip-mask restricts writes to the destination drawable.  If the
     clip-mask is set to a pixmap, it must have depth one and have the
     same root as the GC, or an error results.  If clip-mask is set to
     "x:None", the pixels are always drawn regardless of the clip
     origin.  The clip-mask also can be set by calling `X:Set-Region'.
     Only pixels where the clip-mask has a bit set to 1 are drawn.
     Pixels are not drawn outside the area covered by the clip-mask or
     where the clip-mask has a bit set to 0.  The clip-mask affects all
     graphics requests.  The clip-mask does not clip sources.  The
     clip-mask origin is interpreted relative to the origin of whatever
     destination drawable is specified in a graphics request.

 - Attribute: x:GC-Dash-Offset
     Defines the phase of the pattern, specifying how many pixels into
     the dash-list the pattern should actually begin in any single
     graphics request.  Dashing is continuous through path elements
     combined with a join-style but is reset to the dash-offset between
     each sequence of joined lines.

     The unit of measure for dashes is the same for the ordinary
     coordinate system.  Ideally, a dash length is measured along the
     slope of the line, but implementations are only required to match
     this ideal for horizontal and vertical lines.  Failing the ideal
     semantics, it is suggested that the length be measured along the
     major axis of the line.  The major axis is defined as the x axis
     for lines drawn at an angle of between -45 and +45 degrees or
     between 135 and 225 degrees from the x axis.  For all other lines,
     the major axis is the y axis.

 - Attribute: x:GC-Dash-List
     There must be at least one element in the specified DASH-LIST.
     The initial and alternating elements (second, fourth, and so on)
     of the DASH-LIST are the even dashes, and the others are the odd
     dashes.  Each element specifies a dash length in pixels.  All of
     the elements must be nonzero.  Specifying an odd-length list is
     equivalent to specifying the same list concatenated with itself to
     produce an even-length list.

 - Attribute: x:GC-Arc-Mode
     The arc-mode controls filling in the X:Fill-Arcs function and can
     be set to x:Arc-Pie-Slice or x:Arc-Chord.
    x:Arc-Pie-Slice
          The arcs are pie-slice filled.

    x:Arc-Chord
          The arcs are chord filled.


File: Xlibscm.info,  Node: Cursor,  Next: Colormap,  Prev: Graphics Context,  Up: Top

Cursor
******

 - Function: x:create-cursor DISPLAY SHAPE
     X provides a set of standard cursor shapes in a special font named
     "cursor".  Applications are encouraged to use this interface for
     their cursors because the font can be customized for the individual
     display type.  The SHAPE argument specifies which glyph of the
     standard fonts to use.

     The hotspot comes from the information stored in the cursor font.
     The initial colors of a cursor are a black foreground and a white
     background (see X:Recolor-Cursor).  The names of all cursor shapes
     are defined with the prefix XC: in `x11.scm'.

 - Function: x:create-cursor SOURCE-FONT SOURCE-CHAR MASK-FONT
          MASK-CHAR FGC BGC
     Creates a cursor from the source and mask bitmaps obtained from the
     specified font glyphs.  The integer SOURCE-CHAR must be a defined
     glyph in SOURCE-FONT.  The integer MASK-CHAR must be a defined
     glyph in MASK-FONT.  The origins of the SOURCE-CHAR and MASK-CHAR
     glyphs are positioned coincidently and define the hotspot.  The
     SOURCE-CHAR and MASK-CHAR need not have the same bounding box
     metrics, and there is no restriction on the placement of the
     hotspot relative to the bounding boxes.

 - Function: x:create-cursor SOURCE-FONT SOURCE-CHAR #F #F FGC BGC
     If MASK-FONT and MASK-CHAR are #f, all pixels of the source are
     displayed.

 - Function: x:create-cursor SOURCE-PIXMAP MASK-PIXMAP FGC BGC ORIGIN
     MASK-PIXMAP must be the same size as the pixmap defined by the
     SOURCE-PIXMAP argument.  The foreground and background RGB values
     must be specified using FOREGROUND-COLOR and BACKGROUND-COLOR,
     even if the X server only has a x:Static-Gray or x:Gray-Scale
     screen.  The hotspot must be a point within the SOURCE-PIXMAP.

     `X:Create-Cursor' creates and returns a cursor.  The
     FOREGROUND-COLOR is used for the pixels set to 1 in the source,
     and the BACKGROUND-COLOR is used for the pixels set to 0.  Both
     source and mask must have depth one but can have any root.  The
     MASK-PIXMAP defines the shape of the cursor.  The pixels set to 1
     in MASK-PIXMAP define which source pixels are displayed, and the
     pixels set to 0 define which pixels are ignored.

 - Function: x:create-cursor SOURCE-PIXMAP #F FGC BGC ORIGIN
     If MASK-PIXMAP is #f, all pixels of the source are displayed.


File: Xlibscm.info,  Node: Colormap,  Next: Rendering,  Prev: Cursor,  Up: Top

Colormap
********

A "colormap" maps pixel values to "RGB" color space values.

 - Function: x:create-colormap WINDOW VISUAL ALLOC-POLICY
     WINDOW specifies the window on whose screen you want to create a
     colormap.  VISUAL specifies a visual type supported on the screen.
     ALLOC-POLICY Specifies the colormap entries to be allocated.  You
     can pass `X:Alloc-None' or `X:Alloc-All'.

     The `X:Create-Colormap' function creates and returns a colormap of
     the specified VISUAL type for the screen on which WINDOW resides.
     Note that WINDOW is used only to determine the screen.

    `X:Gray-Scale'

    `X:Pseudo-Color'

    `X:Direct-Color'
          The initial values of the colormap entries are undefined.

    `X:Static-Gray'

    `X:Static-Color'

    `X:True-Color'
          The entries have defined values, but those values are
          specific to VISUAL and are not defined by X.  The
          ALLOC-POLICY must be `X:Alloc-None'.

     For the other visual classes, if ALLOC-POLICY is `X:Alloc-None',
     the colormap initially has no allocated entries, and clients can
     allocate them.

     If ALLOC-POLICY is `X:Alloc-All', the entire colormap is allocated
     writable.  The initial values of all allocated entries are
     undefined.

    `X:Gray-Scale'

    `X:Pseudo-Color'
          The effect is as if an `XAllocColorCells' call returned all
          pixel values from zero to N - 1, where N is the colormap
          entries value in VISUAL.

    `X:Direct-Color'
          The effect is as if an `XAllocColorPlanes' call returned a
          pixel value of zero and red_mask, green_mask, and blue_mask
          values containing the same bits as the corresponding masks in
          the specified visual.


To create a new colormap when the allocation out of a previously shared
colormap has failed because of resource exhaustion, use:

 - Function: x:copy-colormap-and-free COLORMAP
     Creates and returns a colormap of the same visual type and for the
     same screen as the specified COLORMAP.  It also moves all of the
     client's existing allocation from the specified COLORMAP to the
     new colormap with their color values intact and their read-only or
     writable characteristics intact and frees those entries in the
     specified colormap.  Color values in other entries in the new
     colormap are undefined.  If the specified colormap was created by
     the client with alloc set to `X:Alloc-All', the new colormap is
     also created with `X:Alloc-All', all color values for all entries
     are copied from the specified COLORMAP, and then all entries in
     the specified COLORMAP are freed.  If the specified COLORMAP was
     not created by the client with `X:Alloc-All', the allocations to
     be moved are all those pixels and planes that have been allocated
     by the client and that have not been freed since they were
     allocated.


A "colormap" maps pixel values to elements of the "RGB" datatype.  An
RGB is a list or vector of 3 integers, describing the red, green, and
blue intensities respectively.  The integers are in the range 0 - 65535.

 - Function: x:alloc-colormap-cells COLORMAP NCOLORS NPLANES
 - Function: x:alloc-colormap-cells COLORMAP NCOLORS NPLANES CONTIGUOUS?
     The `X:Alloc-Color-Cells' function allocates read/write color
     cells.  The number of colors, NCOLORS must be positive and the
     number of planes, NPLANES nonnegative.  If NCOLORS and nplanes are
     requested, then NCOLORS pixels and nplane plane masks are
     returned.  No mask will have any bits set to 1 in common with any
     other mask or with any of the pixels.  By ORing together each
     pixel with zero or more masks, NCOLORS * 2^NPLANES distinct pixels
     can be produced.  All of these are allocated writable by the
     request.

    `x:Gray-Scale'

    `x:Pseudo-Color'
          Each mask has exactly one bit set to 1.  If CONTIGUOUS? is
          non-false and if all masks are ORed together, a single
          contiguous set of bits set to 1 is formed.

    `x:Direct-Color'
          Each mask has exactly three bits set to 1.  If CONTIGUOUS? is
          non-false and if all masks are ORed together, three
          contiguous sets of bits set to 1 (one within each pixel
          subfield) is formed.

     The RGB values of the allocated entries are undefined.
     `X:Alloc-Color-Cells' returns a list of two uniform arrays if it
     succeeded or #f if it failed.  The first array has the pixels
     allocated and the second has the plane-masks.

 - Function: x:alloc-colormap-cells COLORMAP NCOLORS RGB
 - Function: x:alloc-colormap-cells COLORMAP NCOLORS RGB CONTIGUOUS?
     The specified NCOLORS must be positive; and RGB a list or vector
     of 3 nonnegative integers.  If NCOLORS colors, NREDS reds, NGREENS
     greens, and NBLUES blues are requested, NCOLORS pixels are
     returned; and the masks have NREDS, NGREENS, and NBLUES bits set
     to 1, respectively.  If CONTIGUOUS?  is non-false, each mask will
     have a contiguous set of bits set to 1.  No mask will have any
     bits set to 1 in common with any other mask or with any of the
     pixels.

     Each mask will lie within the corresponding pixel subfield.  By
     ORing together subsets of masks with each pixel value, NCOLORS *
     2(NREDS+NGREENS+NBLUES) distinct pixel values can be produced.
     All of these are allocated by the request.  However, in the
     colormap, there are only NCOLORS * 2^NREDS independent red
     entries, NCOLORS * 2^NGREENS independent green entries, and
     NCOLORS * 2^NBLUES independent blue entries.

     `X:Alloc-Color-Cells' returns a list if it succeeded or #f if it
     failed.  The first element of the list has an array of the pixels
     allocated.  The second, third, and fourth elements are the red,
     green, and blue plane-masks.

 - Function: x:free-colormap-cells COLORMAP PIXELS PLANES
 - Function: x:free-colormap-cells COLORMAP PIXELS
     Frees the cells represented by pixels whose values are in the
     PIXELS unsigned-integer uniform-vector.  The PLANES argument
     should not have any bits set to 1 in common with any of the
     pixels.  The set of all pixels is produced by ORing together
     subsets of the PLANES argument with the pixels.  The request frees
     all of these pixels that were allocated by the client.  Note that
     freeing an individual pixel obtained from `X:Alloc-Colormap-Cells'
     with a planes argument may not actually allow it to be reused
     until all of its related pixels are also freed.  Similarly, a
     read-only entry is not actually freed until it has been freed by
     all clients, and if a client allocates the same read-only entry
     multiple times, it must free the entry that many times before the
     entry is actually freed.

     All specified pixels that are allocated by the client in the
     COLORMAP are freed, even if one or more pixels produce an error.
     It is an error if a specified pixel is not allocated by the client
     (that is, is unallocated or is only allocated by another client)
     or if the colormap was created with all entries writable (by
     passing `x:Alloc-All' to `X:Create-Colormap').  If more than one
     pixel is in error, the one that gets reported is arbitrary.

 - Function: x:colormap-find-color COLORMAP RGB
     RGB is a list or vector of 3 integers, describing the red, green,
     and blue intensities respectively; or an integer `#xrrggbb',
     packing red, green and blue intensities in the range 0 - 255.

 - Function: x:colormap-find-color COLORMAP COLOR-NAME
     The case-insensitive string COLOR_NAME specifies the name of a
     color (for example, `red')

     `X:Colormap-Find-Color' allocates a read-only colormap entry
     corresponding to the closest RGB value supported by the hardware.
     `X:Colormap-Find-Color' returns the pixel value of the color
     closest to the specified RGB or COLOR_NAME elements supported by
     the hardware, if successful; otherwise `X:Colormap-Find-Color'
     returns #f.

     Multiple clients that request the same effective RGB value can be
     assigned the same read-only entry, thus allowing entries to be
     shared.  When the last client deallocates a shared cell, it is
     deallocated.


 - Function: x:color-ref COLORMAP PIXEL
     Returns a list of 3 integers, describing the red, green, and blue
     intensities respectively of the COLORMAP entry of the cell indexed
     by PIXEL.

     The integer PIXEL must be a valid index into COLORMAP.

 - Function: X:Color-Set! COLORMAP PIXEL RGB
     RGB is a list or vector of 3 integers, describing the red, green,
     and blue intensities respectively; or an integer `#xrrggbb',
     packing red, green and blue intensities in the range 0 - 255.

 - Function: X:Color-Set! COLORMAP PIXEL COLOR-NAME
     The case-insensitive string COLOR_NAME specifies the name of a
     color (for example, `red')

     The integer PIXEL must be a valid index into COLORMAP.

     `X:Color-Set!' changes the COLORMAP entry of the read/write cell
     indexed by PIXEL.  If the COLORMAP is an installed map for its
     screen, the changes are visible immediately.


 - Function: x:install-colormap COLORMAP
     Installs the specified COLORMAP for its associated screen.  All
     windows associated with COLORMAP immediately display with true
     colors.  A colormap is associated with a window when the window is
     created or its attributes changed.

     If the specified colormap is not already an installed colormap,
     the X server generates a ColormapNotify event on each window that
     has that colormap.



File: Xlibscm.info,  Node: Rendering,  Next: Event,  Prev: Colormap,  Up: Top

Rendering
*********

 - Function: x:flush DISPLAY
 - Function: x:flush WINDOW
     Flushes the output buffer.  Some client applications need not use
     this function because the output buffer is automatically flushed
     as needed by calls to X:Pending, X:Next-Event, and X:Window-Event.
     Events generated by the server may be enqueued into the library's
     event queue.

 - Function: x:flush GC
     Forces sending of GC component changes.

     Xlib usually defers sending changes to the components of a GC to
     the server until a graphics function is actually called with that
     GC.  This permits batching of component changes into a single
     server request.  In some circumstances, however, it may be
     necessary for the client to explicitly force sending the changes
     to the server.  An example might be when a protocol extension uses
     the GC indirectly, in such a way that the extension interface
     cannot know what GC will be used.

 - Function: x:clear-area WINDOW (X-POS Y-POS) (WIDTH HEIGHT) EXPOSE?
     Paints a rectangular area in the specified WINDOW according to the
     specified dimensions with the WINDOW's background pixel or pixmap.
     The subwindow-mode effectively is `x:Clip-By-Children'.  If width
     is zero, it is replaced with the current width of the WINDOW minus
     x.  If height is zero, it is replaced with the current height of
     the WINDOW minus y.  If the WINDOW has a defined background tile,
     the rectangle clipped by any children is filled with this tile.
     If the WINDOW has background x:None, the contents of the WINDOW
     are not changed.  In either case, if EXPOSE? is True, one or more
     x:Expose events are generated for regions of the rectangle that
     are either visible or are being retained in a backing store.  If
     you specify a WINDOW whose class is x:Input-Only, an error results.

 - Function: x:fill-rectangle WINDOW GCONTEXT POSITION SIZE

Draw Strings
============

 - Function: x:draw-string DRAWABLE GC POSITION STRING
     POSITION specifies coordinates relative to the origin of DRAWABLE
     of the origin of the first character to be drawn.

     `x:draw-string' draws the characters of STRING, starting at
     POSITION.

 - Function: x:image-string DRAWABLE GC POSITION STRING
     POSITION specifies coordinates relative to the origin of DRAWABLE
     of the origin of the first character to be drawn.

     `x:image-string' draws the characters *and background* of STRING,
     starting at POSITION.

Draw Shapes
===========

 - Function: x:draw-points DRAWABLE GC POSITION ...
     POSITION ... specifies coordinates of the point to be drawn.

 - Function: x:draw-points DRAWABLE GC X Y ...
     (X, Y) ... specifies coordinates of the point to be drawn.

 - Function: x:draw-points DRAWABLE GC POINT-ARRAY
     POINT-ARRAY is a uniform short array of rank 2, whose rightmost
     index spans a range of 2.

     The `X:Draw-Points' procedure uses the foreground pixel and
     function components of the GC to draw points into DRAWABLE at the
     positions (relative to the origin of DRAWABLE) specified.

     `X:Draw-Points' uses these GC components: function, planemask,
     foreground, subwindow-mode, clip-x-origin, clip-y-origin, and
     clip-mask.

 - Function: x:draw-segments DRAWABLE GC POS1 POS2 ...
     POS1, POS2, ... specify coordinates to be connected by segments.

 - Function: x:draw-segments DRAWABLE GC X1 Y1 X2 Y2 ...
     (X1, Y1), (X2, Y2) ... specify coordinates to be connected by
     segments.

 - Function: x:draw-segments DRAWABLE GC POINT-ARRAY
     POINT-ARRAY is a uniform short array of rank 2, whose rightmost
     index spans a range of 2.

     The `X:Draw-Segments' procedure uses the components of the
     specified GC to draw multiple unconnected lines between disjoint
     adjacent pair of points passed as arguments.  It draws the
     segments in order and does not perform joining at coincident
     endpoints.  For any given line, `X:Draw-Segments' does not draw a
     pixel more than once.  If thin (zero line-width) segments
     intersect, the intersecting pixels are drawn multiple times.  If
     wide segments intersect, the intersecting pixels are drawn only
     once, as though the entire PolyLine protocol request were a
     single, filled shape.  `X:Draw-Segments' treats all coordinates as
     relative to the origin of DRAWABLE.

     `X:Draw-Segments' uses these GC components: function, plane-mask,
     line-width, line-style, cap-style, fill-style, subwindow-mode,
     clip-x-origin, clip-y-origin, and clip-mask, join-style.  It also
     use these GC mode-dependent components: foreground, background,
     tile, stipple, tilestipple-x-origin, tile-stipple-y-origin,
     dash-offset, and dash-list.

 - Function: x:draw-lines DRAWABLE GC POS1 POS2 ...
     POS1, POS2, ... specify coordinates to be connected by lines.

 - Function: x:draw-lines DRAWABLE GC X1 Y1 X2 Y2 ...
     (X1, Y1), (X2, Y2) ... specify coordinates to be connected by
     lines.

 - Function: x:draw-lines DRAWABLE GC POINT-ARRAY
     POINT-ARRAY is a uniform short array of rank 2, whose rightmost
     index spans a range of 2.

     The `X:Draw-Lines' procedure uses the components of the specified
     GC to draw lines between each adjacent pair of points passed as
     arguments.  It draws the lines in order.  The lines join correctly
     at all intermediate points, and if the first and last points
     coincide, the first and last lines also join correctly.  For any
     given line, `X:Draw-Lines' does not draw a pixel more than once.
     If thin (zero line-width) lines intersect, the intersecting pixels
     are drawn multiple times.  If wide lines intersect, the
     intersecting pixels are drawn only once, as though the entire
     PolyLine protocol request were a single, filled shape.
     `X:Draw-Lines' treats all coordinates as relative to the origin of
     DRAWABLE.

     `X:Draw-Lines' uses these GC components: function, plane-mask,
     line-width, line-style, cap-style, fill-style, subwindow-mode,
     clip-x-origin, clip-y-origin, and clip-mask, join-style.  It also
     use these GC mode-dependent components: foreground, background,
     tile, stipple, tilestipple-x-origin, tile-stipple-y-origin,
     dash-offset, and dash-list.

 - Function: x:fill-polygon DRAWABLE GC POS1 POS2 ...
     POS1, POS2, ... specify coordinates of the border path.

 - Function: x:fill-polygon DRAWABLE GC X1 Y1 X2 Y2 ...
     (X1, Y1), (X2, Y2) ... specify coordinates of the border path.

 - Function: x:fill-polygon DRAWABLE GC POINT-ARRAY
     POINT-ARRAY is a uniform short array of rank 2, whose rightmost
     index spans a range of 2.

     The path is closed automatically if the last point in the list or
     POINT-ARRAY does not coincide with the first point.

     The `X:Fill-Polygon' procedure uses the components of the specified
     GC to fill the region closed by the specified path.
     `X:Fill-Polygon' does not draw a pixel of the region more than
     once.  `X:Fill-Polygon' treats all coordinates as relative to the
     origin of DRAWABLE.

     `X:Fill-Polygon' uses these GC components: function, planemask,
     fill-style, fill-rule, subwindow-mode, clip-x-origin,
     clip-y-origin, and clip-mask.  It also use these GC mode-dependent
     components: foreground, background, tile, stipple,
     tile-stipple-x-origin, and tile-stipple-y-origin.


File: Xlibscm.info,  Node: Event,  Next: Index,  Prev: Rendering,  Up: Top

Event
*****

These three status routines always return immediately if there are
events already in the queue.

 - Function: x:q-length DISPLAY
     Returns the length of the event queue for the connected DISPLAY.
     Note that there may be more events that have not been read into the
     queue yet (see X:Events-Queued).

 - Function: x:pending DISPLAY
     Returns the number of events that have been received from the X
     server but have not been removed from the event queue.

 - Function: x:events-queued DISPLAY
     Returns the number of events already in the queue if the number is
     nonzero.  If there are no events in the queue, `X:Events-Queued'
     attempts to read more events out of the application's connection
     without flushing the output buffer and returns the number read.

Both of these routines return an object of type "event".

 - Function: x:next-event DISPLAY
     Removes and returns the first event from the event queue.  If the
     event queue is empty, `X:Next-Event' flushes the output buffer and
     blocks until an event is received.

 - Function: x:peek-event DISPLAY
     Returns the first event from the event queue, but it does not
     remove the event from the queue.  If the queue is empty,
     `X:Peek-Event' flushes the output buffer and blocks until an event
     is received.

Each event object has fields dependent on its sub-type.

 - Function: x:event-ref EVENT FIELD-NAME
     window                      The window on which EVENT was generated  
                                 and is referred to as the event window.  
     root                        is the event window's root window.       
     subwindow                   If the source window is an inferior of   
                                 the event window, the SUBWINDOW is the   
                                 child of the event window that is the    
                                 source window or the child of the event  
                                 window that is an ancestor of the        
                                 source window.  Otherwise, `None'.       
     X-event:type                An integer: X:KEY-PRESS, X:KEY-RELEASE,  
                                 X:BUTTON-PRESS, X:BUTTON-RELEASE,        
                                 X:MOTION-NOTIFY, X:ENTER-NOTIFY,         
                                 X:LEAVE-NOTIFY, X:FOCUS-IN,              
                                 X:FOCUS-OUT, X:KEYMAP-NOTIFY, X:EXPOSE,  
                                 X:GRAPHICS-EXPOSE, X:NO-EXPOSE,          
                                 X:VISIBILITY-NOTIFY, X:CREATE-NOTIFY,    
                                 X:DESTROY-NOTIFY, X:UNMAP-NOTIFY,        
                                 X:MAP-NOTIFY, X:MAP-REQUEST,             
                                 X:REPARENT-NOTIFY, X:CONFIGURE-NOTIFY,   
                                 X:CONFIGURE-REQUEST, X:GRAVITY-NOTIFY,   
                                 X:RESIZE-REQUEST, X:CIRCULATE-NOTIFY,    
                                 X:CIRCULATE-REQUEST, X:PROPERTY-NOTIFY,  
                                 X:SELECTION-CLEAR, X:SELECTION-REQUEST,  
                                 X:SELECTION-NOTIFY, X:COLORMAP-NOTIFY,   
                                 X:CLIENT-MESSAGE, or X:MAPPING-NOTIFY.   
     X-event:serial              The serial number of the protocol        
                                 request that generated the EVENT.        
     X-event:send-event          Boolean that indicates whether the       
                                 event was sent by a different client.    
     X-event:time                The time when the EVENT was generated    
                                 expressed in milliseconds.               
     X-event:x                                                            
     X-event:y                   For window entry/exit events the X and   
                                 Y members are set to the coordinates of  
                                 the pointer position in the event        
                                 window.  This position is always the     
                                 pointer's final position, not its        
                                 initial position.  If the event window   
                                 is on the same screen as the root        
                                 window, X and Y are the pointer          
                                 coordinates relative to the event        
                                 window's origin.  Otherwise, X and Y     
                                 are set to zero.                         
                                                                          
                                 For expose events The X and Y members    
                                 are set to the coordinates relative to   
                                 the drawable's origin and indicate the   
                                 upper-left corner of the rectangle.      
                                                                          
                                 For configure, create, gravity, and      
                                 reparent events the X and Y members are  
                                 set to the window's coordinates          
                                 relative to the parent window's origin   
                                 and indicate the position of the         
                                 upper-left outside corner of the         
                                 created window.                          
     X-event:x-root                                                       
     X-event:y-root              The pointer's coordinates relative to    
                                 the root window's origin at the time of  
                                 the EVENT.                               
     X-event:state               For keyboard, pointer and window         
                                 entry/exit events, the state member is   
                                 set to indicate the logical state of     
                                 the pointer buttons and modifier keys    
                                 just prior to the EVENT, which is the    
                                 bitwise inclusive OR of one or more of   
                                 the button or modifier key masks:        
                                 X:BUTTON1-MASK, X:BUTTON2-MASK,          
                                 X:BUTTON3-MASK, X:BUTTON4-MASK,          
                                 X:BUTTON5-MASK, X:SHIFT-MASK,            
                                 X:LOCK-MASK, X:CONTROL-MASK,             
                                 X:MOD1-MASK, X:MOD2-MASK, X:MOD3-MASK,   
                                 X:MOD4-MASK, and X:MOD5-MASK.            
                                                                          
                                 For visibility events, the state of the  
                                 window's visibility:                     
                                 X:VISIBILITY-UNOBSCURED,                 
                                 X:VISIBILITY-PARTIALLY-OBSCURED, or      
                                 X:VISIBILITY-FULLY-OBSCURED.             
                                                                          
                                 For colormap events, indicates whether   
                                 the colormap is installed or             
                                 uninstalled: x:Colormap-Installed or     
                                 x:Colormap-Uninstalled.                  
                                                                          
                                 For property events, indicates whether   
                                 the property was changed to a new value  
                                 or deleted: x:Property-New-Value or      
                                 x:Property-Delete.                       
     X-event:keycode             An integer that represents a physical    
                                 key on the keyboard.                     
     X-event:same-screen         Indicates whether the event window is    
                                 on the same screen as the root window.   
                                 If #t, the event and root windows are    
                                 on the same screen.  If #f, the event    
                                 and root windows are not on the same     
                                 screen.                                  
     X-event:button              The pointer button that changed state;   
                                 can be the X:BUTTON1, X:BUTTON2,         
                                 X:BUTTON3, X:BUTTON4, or X:BUTTON5       
                                 value.                                   
     X-event:is-hint             Detail of motion-notify events:          
                                 X:NOTIFY-NORMAL or X:NOTIFY-HINT.        
     X-event:mode                Indicates whether the EVENT is a normal  
                                 event, pseudo-motion event when a grab   
                                 activates, or a pseudo-motion event      
                                 when a grab deactivates:                 
                                 X:NOTIFY-NORMAL, X:NOTIFY-GRAB, or       
                                 X:NOTIFY-UNGRAB.                         
     X-event:detail              Indicates the notification detail:       
                                 X:NOTIFY-ANCESTOR, X:NOTIFY-VIRTUAL,     
                                 X:NOTIFY-INFERIOR, X:NOTIFY-NONLINEAR,   
                                 or X:NOTIFY-NONLINEAR-VIRTUAL.           
     X-event:focus               If the event window is the focus window  
                                 or an inferior of the focus window, #t;  
                                 otherwise #f.                            
     X-event:width                                                        
     X-event:height              The size (extent) of the rectangle.      
     X-event:count               For mapping events is the number of      
                                 keycodes altered.                        
                                                                          
                                 For expose events Is the number of       
                                 Expose or GraphicsExpose events that     
                                 are to follow.  If count is zero, no     
                                 more Expose events follow for this       
                                 window.  However, if count is nonzero,   
                                 at least that number of Expose events    
                                 (and possibly more) follow for this      
                                 window.  Simple applications that do     
                                 not want to optimize redisplay by        
                                 distinguishing between subareas of its   
                                 window can just ignore all Expose        
                                 events with nonzero counts and perform   
                                 full redisplays on events with zero      
                                 counts.                                  
     X-event:major-code          The major_code member is set to the      
                                 graphics request initiated by the        
                                 client and can be either X_CopyArea or   
                                 X_CopyPlane.  If it is X_CopyArea, a     
                                 call to XCopyArea initiated the          
                                 request.  If it is X_CopyPlane, a call   
                                 to XCopyPlane initiated the request.     
     X-event:minor-code          Not currently used.                      
     X-event:border-width        For configure events, the width of the   
                                 window's border, in pixels.              
     X-event:override-redirect   The override-redirect attribute of the   
                                 window.  Window manager clients          
                                 normally should ignore this window if    
                                 it is #t.                                
     X-event:from-configure      True if the event was generated as a     
                                 result of a resizing of the window's     
                                 parent when the window itself had a      
                                 win-gravity of x:Unmap-Gravity.          
     X-event:value-mask          Indicates which components were          
                                 specified in the ConfigureWindow         
                                 protocol request.  The corresponding     
                                 values are reported as given in the      
                                 request.  The remaining values are       
                                 filled in from the current geometry of   
                                 the window, except in the case of above  
                                 (sibling) and detail (stack-mode),       
                                 which are reported as None and Above,    
                                 respectively, if they are not given in   
                                 the request.                             
     X-event:place               The window's position after the restack  
                                 occurs and is either x:Place-On-Top or   
                                 x:Place-On-Bottom.  If it is             
                                 x:Place-On-Top, the window is now on     
                                 top of all siblings.  If it is           
                                 x:Place-On-Bottom, the window is now     
                                 below all siblings.                      
     X-event:new                 indicate whether the colormap for the    
                                 specified window was changed or          
                                 installed or uninstalled and can be      
                                 True or False.  If it is True, the       
                                 colormap was changed.  If it is False,   
                                 the colormap was installed or            
                                 uninstalled.                             
     X-event:format              Is 8, 16, or 32 and specifies whether    
                                 the data should be viewed as a list of   
                                 bytes, shorts, or longs                  
     X-event:request             Indicates the kind of mapping change     
                                 that occurred and can be                 
                                 X:MAPPING-MODIFIER, X:MAPPING-KEYBOARD,  
                                 or X:MAPPING-POINTER.  If it is          
                                 X:MAPPING-MODIFIER, the modifier         
                                 mapping was changed.  If it is           
                                 X:MAPPING-KEYBOARD, the keyboard         
                                 mapping was changed.  If it is           
                                 X:MAPPING-POINTER, the pointer button    
                                 mapping was changed.                     
     X-event:first-keycode       The X-event:first-keycode is set only    
                                 if the X-event:request was set to        
                                 X:MAPPING-KEYBOARD.  The number in       
                                 X-event:first-keycode represents the     
                                 first number in the range of the         
                                 altered mapping, and X-event:count       
                                 represents the number of keycodes        
                                 altered.                                 


File: Xlibscm.info,  Node: Index,  Prev: Event,  Up: Top

Procedure and Macro Index
*************************

This is an alphabetical list of all the procedures and macros in
Xlibscm.

* Menu:

* hostname:number.screen-number:         Display.
* x:alloc-colormap-cells:                Colormap.
* x:clear-area:                          Rendering.
* x:close <1>:                           Window.
* x:close:                               Display.
* x:color-ref:                           Colormap.
* X:Color-Set!:                          Colormap.
* x:colormap-find-color:                 Colormap.
* x:copy-colormap-and-free:              Colormap.
* x:copy-gc-fields!:                     Graphics Context.
* x:create-colormap:                     Colormap.
* x:create-cursor:                       Cursor.
* x:create-gc:                           Graphics Context.
* x:create-pixmap:                       Window.
* x:create-window:                       Window.
* x:default-colormap:                    Screen.
* x:default-depths:                      Screen.
* x:default-gc:                          Screen.
* x:default-screen:                      Screen.
* x:default-visual:                      Screen.
* x:draw-lines:                          Rendering.
* x:draw-points:                         Rendering.
* x:draw-segments:                       Rendering.
* x:draw-string:                         Rendering.
* x:event-ref:                           Event.
* x:events-queued:                       Event.
* x:fill-polygon:                        Rendering.
* x:fill-rectangle:                      Rendering.
* x:flush:                               Rendering.
* x:free-colormap-cells:                 Colormap.
* x:gc-ref:                              Graphics Context.
* x:gc-set!:                             Graphics Context.
* x:image-string:                        Rendering.
* x:install-colormap:                    Colormap.
* x:make-visual:                         Screen.
* x:map-raised:                          Window Visibility.
* x:map-subwindows:                      Window Visibility.
* x:map-window:                          Window Visibility.
* x:next-event:                          Event.
* x:open-display:                        Display.
* x:peek-event:                          Event.
* x:pending:                             Event.
* x:protocol-version:                    Display.
* x:q-length:                            Event.
* x:root-window:                         Screen.
* x:screen-black:                        Screen.
* x:screen-cells:                        Screen.
* x:screen-count:                        Screen.
* x:screen-depth:                        Screen.
* x:screen-dimensions:                   Screen.
* x:screen-size:                         Screen.
* x:screen-white:                        Screen.
* x:server-vendor:                       Display.
* x:unmap-subwindows:                    Window Visibility.
* x:unmap-window:                        Window Visibility.
* x:vendor-release:                      Display.
* x:window-geometry:                     Window.
* x:window-set!:                         Window.

Variable Index
**************

This is an alphabetical list of all the global variables in Xlibscm.

* Menu:

* x:CW-Back-Pixel:                       Window.
* x:CW-Back-Pixmap:                      Window.
* x:CW-Backing-Pixel:                    Window.
* x:CW-Backing-Planes:                   Window.
* x:CW-Backing-Store:                    Window.
* x:CW-Bit-Gravity:                      Window.
* x:CW-Border-Pixel:                     Window.
* x:CW-Border-Pixmap:                    Window.
* x:CW-Colormap:                         Window.
* x:CW-Cursor:                           Window.
* x:CW-Dont-Propagate:                   Window.
* x:CW-Event-Mask:                       Window.
* x:CW-Override-Redirect:                Window.
* x:CW-Save-Under:                       Window.
* x:CW-Win-Gravity:                      Window.
* x:GC-Arc-Mode:                         Graphics Context.
* x:GC-Background:                       Graphics Context.
* x:GC-Cap-Style:                        Graphics Context.
* x:GC-Clip-Mask:                        Graphics Context.
* x:GC-Clip-X-Origin:                    Graphics Context.
* x:GC-Clip-Y-Origin:                    Graphics Context.
* x:GC-Dash-List:                        Graphics Context.
* x:GC-Dash-Offset:                      Graphics Context.
* x:GC-Fill-Rule:                        Graphics Context.
* x:GC-Fill-Style:                       Graphics Context.
* x:GC-Font:                             Graphics Context.
* x:GC-Foreground:                       Graphics Context.
* x:GC-Function:                         Graphics Context.
* x:GC-Graphics-Exposures:               Graphics Context.
* x:GC-Join-Style:                       Graphics Context.
* x:GC-Line-Style:                       Graphics Context.
* x:GC-Line-Width:                       Graphics Context.
* x:GC-Plane-Mask:                       Graphics Context.
* x:GC-Stipple:                          Graphics Context.
* x:GC-Subwindow-Mode:                   Graphics Context.
* x:GC-Tile:                             Graphics Context.
* x:GC-Tile-Stip-X-Origin:               Graphics Context.
* x:GC-Tile-Stip-Y-Origin:               Graphics Context.

This is an alphabetical list of concepts introduced in this manual.

Concept Index
*************

* Menu:

* colormap:                              Colormap.
* cursor:                                Cursor.
* depth:                                 Screen.
* drawable:                              Window.
* Drawable:                              Window.
* map:                                   Window Visibility.
* mapped:                                Window Visibility.
* none:                                  Graphics Context.
* RGB:                                   Colormap.
* unmap:                                 Window Visibility.
* unmapped:                              Window Visibility.
* Visual:                                Screen.
* visual:                                Screen.
* X:                                     Xlibscm.
* x:None:                                Graphics Context.
* Xlib:                                  Xlibscm.



Tag Table:
Node: Top241
Node: Xlibscm1366
Node: Display4144
Node: Screen6776
Node: Window10533
Node: Window Visibility30412
Node: Graphics Context34697
Node: Cursor50412
Node: Colormap52915
Node: Rendering62697
Node: Event70253
Node: Index86690

End Tag Table
