RC(1)

NAME
rc - shell

SYNOPSIS
rc [-deilnopsVvx] [-c command] [arguments]

DESCRIPTION
rc is a command interpreter and programming language similar to sh(1). It is based on the AT&T Plan 9 shell of the same name. The shell offers a C-like syntax (much more so than the C shell), and a powerful mechanism for manipulating variables. It is reasonably small and reasonably fast, especially when compared to contemporary shells. Its use is intended to be interactive, but the language lends itself well to scripts.

OPTIONS

If  is present, commands are executed from the immediately following argument. Any further arguments to rc are placed in Thus:

    prints out

This flag causes
    rc not to ignore or Thus rc can be made to dump core if sent This flag is only useful for debugging rc.

If the
    flag is present, then rc will exit if the exit status of a command is false (nonzero). rc will not exit, however, if a conditional fails, e.g., an command.

If the
    flag is present or if the input to rc is from a terminal (as determined by isatty(3)) then rc will be in interactive mode. That is, a prompt (from will be printed before an input line is taken, and rc will ignore the signals and

If the
    flag is present, or if rc's is a dash then rc will behave as a login shell. That is, it will try to run commands present in if this file exists, before reading any other input.

This flag causes
    rc to read its input and parse it, but not to execute any commands. This is useful for syntax checking on scripts. If used in combination with the flag, rc will print each command as it is parsed in a form similar to the one used for exporting functions into the environment.

This flag prevents the usual practice of trying to open
    on file descriptors 0, 1, and 2, if any of those descriptors are inherited closed.

This flag prevents
    rc from initializing shell functions from the environment. This allows rc to run in a protected mode, whereby it becomes more difficult for an rc script to be subverted by placing false commands in the environment. (Note that the presence of this flag does not mean that it is safe to run setuid rc scripts; the usual caveats about the setuid bit still apply.)

This flag causes
    rc to read from standard input. Any arguments are placed in

This flag causes
    rc to print a version string to standard output, and exit immediately.

This flag causes
    rc to echo its input to standard error as it is read.

This flag causes
    rc to print every command on standard error before it is executed. It can be useful for debugging rc scripts.

COMMANDS
A simple command is a sequence of words, separated by white space (space and tab) characters that ends with a newline, semicolon or ampersand The first word of a command is the name of that command. If the name begins with or then the name is used as an absolute path name referring to an executable file. Otherwise, the name of the command is looked up in a table of shell functions, builtin commands, or as a file in the directories named by

  Background Tasks
A command ending with a is run in the background; that is, the shell returns immediately rather than waiting for the command to complete. Background commands have connected to their standard input unless an explicit redirection for standard input is used.

  Subshells
A command prefixed with an at-sign is executed in a subshell. This insulates the parent shell from the effects of state changing operations such as a cd or a variable assignment. For example:

will run make(1) in the parent directory but leaves the shell running in the current directory.

  Line continuation
A long logical line may be continued over several physical lines by terminating each line (except the last) with a backslash The backslash-newline sequence is treated as a space. A backslash is not otherwise special to rc. (In addition, inside quotes a backslash loses its special meaning even when it is followed by a newline.)

  Quoting
rc interprets several characters specially; special characters automatically terminate words. The following characters are special:

The single quote prevents special treatment of any character other than itself. All characters, including control characters, newlines, and backslashes between two quote characters are treated as an uninterpreted string. A quote character itself may be quoted by placing two quotes in a row. The minimal sequence needed to enter the quote character is The empty string is represented by Thus:

prints out

The number sign begins a comment in rc. All characters up to but not including the next newline are ignored. Note that backslash continuation does not work inside a comment, i.e., the backslash is ignored along with everything else.

  Grouping
Zero or more commands may be grouped within braces and and are then treated as one command. Braces do not otherwise define scope; they are used only for command grouping. In particular, be wary of the command:

Since pipe binds tighter than this command does not perform what the user expects it to. Instead, enclose the whole statement in braces:

Fortunately, rc's grammar is simple enough that a (confident) user can understand it by examining the skeletal yacc(1) grammar at the end of this man page (see the section entitled GRAMMAR).

  Input and output

The standard output may be redirected to a file with

and the standard input may be taken from a file with

Redirections can appear anywhere in the line: the word following the redirection symbol is the filename and must be quoted if it contains spaces or other special characters. These are all equivalent.

File descriptors other than 0 and 1 may be specified also. For example, to redirect standard error to a file, use:

In order to duplicate a file descriptor, use Thus to redirect both standard output and standard error to the same file, use

As in sh, redirections are processed from left to right. Thus this sequence

is usually a mistake. It first duplicates standard error to standard output; then redirects standard output to a file, leaving standard error wherever standard output originally was.

To close a file descriptor that may be open, use For example, to close file descriptor 7:

Note that no spaces may appear in these constructs: would send the output of the command to a file named with the intended filename appearing in the command's argument list.

In order to place the output of a command at the end of an already existing file, use:

If the file does not exist, then it is created.

``Here documents'' are supported as in sh with the use of

Subsequent lines form the standard input of the command, till a line containing just the marker, in this case is encountered.

If the end-of-file marker is enclosed in quotes, then no variable substitution occurs inside the here document. Otherwise, every variable is substituted by its space-separated-list value (see Flat Lists, below), and if a character follows a variable name, it is deleted. This allows the unambiguous use of variables adjacent to text, as in

To include a literal in a here document when an unquoted end-of-file marker is being used, enter it as

Additionally, rc supports ``here strings'', which are like here documents, except that input is taken directly from a string on the command line. Their use is illustrated here:

(This feature enables rc to export functions using here documents into the environment; the author does not expect users to find this feature useful.)

  Pipes
Two or more commands may be combined in a pipeline by placing the vertical bar between them. The standard output (file descriptor 1) of the command on the left is tied to the standard input (file descriptor 0) of the command on the right. The notation indicates that file descriptor n of the left process is connected to file descriptor m of the right process. is a shorthand for As an example, to pipe the standard error of a command to wc(1), use:

As with file redirections, no spaces may occur in the construct specifying numbered file descriptors.

The exit status of a pipeline is considered true if and only if every command in the pipeline exits true.

  Commands as Arguments
Some commands, like cmp(1) or diff(1), take their arguments on the command line, and do not read input from standard input. It is convenient sometimes to build nonlinear pipelines so that a command like cmp can read the output of two other commands at once. rc does it like this:

compares the output of the two commands in braces. Note: since this form of redirection is implemented with some kind of pipe, and since one cannot lseek(2) on a pipe, commands that use lseek(2) will hang. For example, most versions of diff(1) use lseek(2) on their inputs.

Data can be sent down a pipe to several commands using tee(1) and the output version of this notation:

CONTROL STRUCTURES
The following may be used for control flow in rc:

  If-Else Statements

cmd
The test is executed, and if its return status is zero, the first command is executed, otherwise the second is. Braces are not mandatory around the commands. However, an statement is valid only if it follows a close-brace on the same line. Otherwise, the is taken to be a simple-if:

  While and For Loops

rc  executes the test and performs the command as long as the test is true.

rc  sets var to each element of list (which may contain variables and backquote substitutions) and runs cmd. If list'' is omitted, then rc will set var to each element of (excluding For example:

    will set to the name of each file in the current directory that is executable.

  Switch

rc  looks inside the braces after a for statements beginning with the word If any of the patterns following match the list supplied to then the commands up until the next statement are executed. The metacharacters or should not be quoted; matching is performed only against the strings in list, not against file names. (Matching for case statements is the same as for the command.)

  Logical Operators
There are a number of operators in rc which depend on the exit status of a command.

executes the first command and then executes the second command if and only if the first command exits with a zero exit status (``true'' in Unix).

executes the first command and then executes the second command if and only if the first command exits with a nonzero exit status (``false'' in Unix).

negates the exit status of a command.

PATTERN MATCHING
There are two forms of pattern matching in rc. One is traditional shell globbing. This occurs in matching for file names in argument lists:

When the characters or occur in an argument or command, rc looks at the argument as a pattern for matching against files. (Contrary to the behavior other shells exhibit, rc will only perform pattern matching if a metacharacter occurs unquoted and literally in the input. Thus,

will always echo just a star. In order for non-literal metacharacters to be expanded, an statement must be used in order to rescan the input.) Pattern matching occurs according to the following rules: a matches any number (including zero) of characters. A matches any single character, and a followed by a number of characters followed by a matches a single character in that class. The rules for character class matching are the same as those for ed(1), with the exception that character class negation is achieved with the tilde not the caret since the caret already means something else in rc.

rc also matches patterns against strings with the command:

sets to zero if and only if a supplied pattern matches any single element of the subject list. Thus

sets status to zero, while

sets status to one. The null list is matched by the null list, so

checks to see whether is empty or not. This may also be achieved by the test

Note that inside a command rc does not match patterns against file names, so it is not necessary to quote the characters and However, rc does expand the subject against filenames if it contains metacharacters. Thus, the command

returns true if any of the files in the current directory have a single-character name. (Note that if the command is given a list as its first argument, then a successful match against any of the elements of that list will cause to return true. For example:

is true.)

LISTS AND VARIABLES
The primary data structure in rc is the list, which is a sequence of words. Parentheses are used to group lists. The empty list is represented by Lists have no hierarchical structure; a list inside another list is expanded so the outer list contains all the elements of the inner list. Thus, the following are all equivalent

Note that the null string, and the null list, are two very different things. Assigning the null string to variable is a valid operation, but it does not remove its definition. For example, if is set to then returns a 1.

  List Concatenation
Two lists may be joined by the concatenation operator A single word is treated as a list of length one, so

produces the output

For lists of more than one element, concatenation works according to the following rules: if the two lists have the same number of elements, then concatenation is pairwise:

produces the output

Otherwise, one of the lists must have a single element, and then the concatenation is distributive:

has the effect of performing the command

  Free Carets
rc inserts carets (concatenation operators) for free in certain situations, in order to save some typing on the user's behalf. For example, the above example could also be typed in as:

rc takes care to insert a free-caret between the and as well as between and The rule for free carets is as follows: if a word or keyword is immediately followed by another word, keyword, dollar-sign or backquote, then rc inserts a caret between them.

  Variables
A list may be assigned to a variable, using the notation:

The special variable may be assigned to using this notation; rc has no set builtin.

Any non-empty sequence of characters, except a sequence including only digits, may be used as a variable name. Any character except may be used, but special characters must be quoted. All user-defined variables are exported into the environment.

The value of a variable is referenced with the notation:

Any variable which has not been assigned a value returns the null list, when referenced. In addition, multiple references are allowed:

prints

A variable's definition may also be removed by assigning the null list to a variable:

For ``free careting'' to work correctly, rc must make certain assumptions about what characters may appear in a variable name. rc assumes that a variable name consists only of alphanumeric characters, underscore and star To reference a variable with other characters in its name, quote the variable name. Thus:

  Local Variables
Any number of variable assignments may be made local to a single command by typing:

The command may be a compound command, so for example:

sets to and removes for the duration of one long compound command.

  Variable Subscripts
Variables may be subscripted with the notation

where n is a list of integers (origin 1). The list of subscripts need not be in order or even unique. Thus, if

then

prints

If n references a nonexistent element, then returns the null list. The notation where n is an integer, is a shorthand for Thus, rc's arguments may be referred to as and so on.

Note also that the list of subscripts may be given by any of rc's list operations:

returns the first 10 elements of

To count the number of elements in a variable, use

This returns a single-element list, with the number of elements in

  Flat Lists
In order to create a single-element list from a multi-element list, with the components space-separated, use

This is useful when the normal list concatenation rules need to be bypassed. For example, to append a single period at the end of use:

  Backquote Substitution
A list may be formed from the output of a command by using backquote substitution:

returns a list formed from the standard output of the command in braces. is used to split the output into list elements. By default, has the value space-tab-newline. The braces may be omitted if the command is a single word. Thus may be used instead of This last feature is useful when defining functions that expand to useful argument lists. A frequent use is:

followed by

(This will print out a word-count of all C source files in the current directory.)

In order to override the value of for a single backquote substitution, use:

will be temporarily ignored and the command's output will be split as specified by the list following the double backquote. For example:

splits up into fields, assuming that contains a newline as its value.

SPECIAL VARIABLES
Several variables are known to rc and are treated specially.

The argument list of
    rc. etc. are the same as etc. The variable holds the value of with which rc was invoked. Additionally, is set to the name of a function for the duration of the execution of that function, and is also set to the name of the file being interpreted for the duration of a command.

The process ID of the last process started in the background.

The process IDs of any background processes which are outstanding
    or which have died and have not been waited for yet.

The exit status of the
    rc forked to execute the most recent backquote substitution.

A list of directories to search for the target of a
    cd command. The empty string stands for the current directory. Note that if the variable does not contain the current directory, then the current directory will not be searched; this allows directory searching to begin in a directory other than the current directory. Note also that an assignment to causes an automatic assignment to and vice-versa.

contains the name of a file to which commands are appended as
    rc reads them. This facilitates the use of a stand-alone history program (such as history(1)) which parses the contents of the history file and presents them to rc for reinterpretation. If is not set, then rc does not append commands to any file.

The default directory for the builtin
    cd command and is the directory in which rc looks to find its initialization file, if rc has been started up as a login shell. Like and and are aliased to each other.

The internal field separator, used for splitting up the output of
    backquote commands for digestion as a list.

This is a list of directories to search in for commands.
    The empty string stands for the current directory. Note that like and and are aliased to each other. If or is not set at startup time, assumes a default value suitable for your system. This is typically

The process ID of the currently running
    rc.

This variable holds the two prompts (in list form, of course) that
    rc prints. is printed before each command is read, and is printed when input is expected to continue on the next line. rc sets to by default. The reason for this is that it enables an rc user to grab commands from previous lines using a mouse, and to present them to rc for re-interpretation; the semicolon prompt is simply ignored by rc. The null also has its justification: an rc script, when typed interactively, will not leave on the screen, and can therefore be grabbed by a mouse and placed directly into a file for use as a shell script, without further editing being necessary.

If this function is set, then it gets executed every time
    rc is about to print

The exit status of the last command.
    If the command exited with a numeric value, that number is the status. If the died with a signal, the status is the name of that signal; if a core file was created, the string is appended. The value of for a pipeline is a list, with one entry, as above, for each process in the pipeline. For example, the command

    usually sets to

The values of and are derived from the environment values of and Otherwise, they are derived from the environment values of and This is for compatibility with other Unix programs, like sh(1). and are assumed to be colon-separated lists.

FUNCTIONS
rc functions are identical to rc scripts, except that they are stored in memory and are automatically exported into the environment. A shell function is declared as:

rc scans the definition until the close-brace, so the function can span more than one line. The function definition may be removed by typing

(One or more names may be specified. With an accompanying definition, all names receive the same definition. This is sometimes useful for assigning the same signal handler to many signals. Without a definition, all named functions are deleted.) When a function is executed, is set to the arguments to that function for the duration of the command. Thus a reasonable definition for a shorthand for ls(1), could be:

but not

INTERRUPTS AND SIGNALS
rc recognizes a number of signals, and allows the user to define shell functions which act as signal handlers. rc by default traps when it is in interactive mode. and are ignored, unless rc has been invoked with the flag. However, user-defined signal handlers may be written for these and all other signals. The way to define a signal handler is to write a function by the name of the signal in lower case. Thus:

In addition to Unix signals, rc recognizes the artificial signal which occurs as rc is about to exit.

In order to remove a signal handler's definition, remove it as though it were a regular function. For example:

returns the handler of to the default value. In order to ignore a signal, set the signal handler's value to Thus:

causes SIGINT to be ignored by the shell. Only signals that are being ignored are passed on to programs run by rc; signal functions are not exported.

On System V-based Unix systems, rc will not allow you to trap

BUILTIN COMMANDS
Builtin commands execute in the context of the shell, but otherwise behave exactly like other commands. Although !, ~ and @ are not strictly speaking builtin commands, they can usually be used as such.

. [-i] file [arg ...]
    Reads file as input to rc and executes its contents. With a flag, input is interactive. Thus from within a shell script,

    does the ``right'' thing.

break
    Breaks from the innermost or as in C. It is an error to invoke break outside of a loop. (Note that there is no break keyword between commands in statements, unlike C.)

builtin command [arg ...]
    Executes the command ignoring any function definition of the same name. This command is present to allow functions with the same names as builtins to use the underlying builtin or binary.

cd [directory]
    Changes the current directory to directory. The variable is searched for possible locations of directory, analogous to the searching of for executable files. With no argument, cd changes the current directory to

echo [-n] [--] [arg ...]
    Prints its arguments to standard output, terminated by a newline. Arguments are separated by spaces. If the first argument is no final newline is printed. If the first argument is then all other arguments are echoed literally. This is used for echoing a literal

eval [list]
    Concatenates the elements of list with spaces and feeds the resulting string to rc for re-scanning. This is the only time input is rescanned in rc.

exec [arg ...]
    Replaces rc with the given command. If the exec contains only redirections, then these redirections apply to the current shell and the shell does not exit. For example,

    places further output to standard error in the file err.out.

exit [status]
    Cause the current shell to exit with the given exit status. If no argument is given, the current value of is used.

limit [-h] [resource [value]]
    Similar to the csh(1) limit builtin, this command operates upon the BSD-style limits of a process. The flag displays/alters the hard limits. The resources which can be shown or altered are cputime, filesize, datasize, stacksize, coredumpsize and memoryuse. For example:

    disables core dumps.

newpgrp
    Puts rc into a new process group. This builtin is useful for making rc behave like a job-control shell in a hostile environment. One example is the NeXT Terminal program, which implicitly assumes that each shell it forks will put itself into a new process group.

return [n]
    Returns from the current function, with status n, where n is a single value or a list of possible exit statuses. Thus it is legal to have

    (This is commonly used to allow a function to return with the exit status of a previously executed pipeline of commands.) If n is omitted, then is left unchanged. It is an error to invoke return when not inside a function.

shift [n]
    Deletes n elements from the beginning of and shifts the other elements down by n. n defaults to 1. (Note that is not affected by shift.)

umask [mask]
    Sets the current umask (see umask(2)) to the octal mask. If no argument is present, the current mask value is printed.

wait [pid]
    Waits for the specified pid, which must have been started by rc. If no pid is specified, rc waits for all child processes to exit.

whatis [-b] [-f] [-p] [-s] [-v] [--] [name ...]
    Prints a definition of the named objects. For builtins, foo is printed; for functions, including signal handlers, their definitions are printed; for executable files, path names are printed; and for variables, their values are printed. The flags restrict output to builtins, functions, executable programs, signal handlers, and variables, respectively. If no names are specified, rc lists all objects of that type. (This is not permitted for Without arguments, is equivalent to and prints the values of all shell variables and functions.

    Note that whatis output is suitable for input to rc; by saving the output of whatis in a file, it should be possible to recreate the state of rc by sourcing this file with a command. Another note: cannot be used to store the state of rc's signal handlers in a file, because builtins with redirections are run in a subshell, and rc always restores signal handlers to their default value after a

    Since whatis uses getopt(3) to parse its arguments, you can use the special argument to terminate its flags. This allows you to use names beginning with a dash, such as the history(1) commands. For example,

EXIT STATUS
The exit status of rc is normally the same as that of the last command executed. If the last command was a pipeline, rc exits if every command in the pipeline did; otherwise it exits

rc can be made to exit with a particular status using the exit builtin.

GRAMMAR
Here is rc's grammar, edited to remove semantic actions. %term ANDAND BACKBACK BANG CASE COUNT DUP ELSE END FLAT FN FOR IF IN %term OROR PIPE REDIR SUB SUBSHELL SWITCH TWIDDLE WHILE WORD HUH %left WHILE ')' ELSE %left ANDAND OROR '\n' %left BANG SUBSHELL %left PIPE %right '$' %left SUB %start rc %% rc: line end
    | error end end: END /* EOF */ | '\n' cmdsa: cmd ';' | cmd '&' line: cmd | cmdsa line body: cmd | cmdsan body cmdsan: cmdsa | cmd '\n' brace: '{' body '}' paren: '(' body ')' assign: first '=' word epilog: /* empty */ | redir epilog redir: DUP | REDIR word case: CASE words ';' | CASE words '\n' cbody: cmd | case cbody | cmdsan cbody
iftail: cmd    %prec ELSE
    | brace ELSE optnl cmd
cmd    : /* empty */    %prec WHILE
    | simple
    | brace epilog
    | IF paren optnl iftail
    | FOR '(' word IN words ')' optnl cmd
    | FOR '(' word ')' optnl cmd
    | WHILE paren optnl cmd
    | SWITCH '(' word ')' optnl '{' cbody '}'
    | TWIDDLE optcaret word words
    | cmd ANDAND optnl cmd
    | cmd OROR optnl cmd
     | cmd PIPE optnl cmd
    | redir cmd    %prec BANG
    | assign cmd    %prec BANG
    | BANG optcaret cmd
    | SUBSHELL optcaret cmd
    | FN words brace
    | FN words optcaret: /* empty */ | '^' simple: first | simple word | simple redir first: comword | first '^' sword sword: comword | keyword word: sword | word '^' sword comword: '$' sword
    | '$' sword SUB words ')'
    | COUNT sword
    | FLAT sword
    | '`' sword
    | '`' brace
    | BACKBACK word    brace | BACKBACK word sword
    | '(' words ')'
    | REDIR brace
    | WORD keyword: FOR | IN | WHILE | IF | SWITCH
    | FN | ELSE | CASE | TWIDDLE | BANG | SUBSHELL words: /* empty */ | words word optnl: /* empty */ | optnl '\n'

FILES

CREDITS
rc was written by Byron Rakitzis, with valuable help from Paul Haahr, Hugh Redelmeier and David Sanderson. The design of this shell was copied from the rc that Tom Duff wrote at Bell Labs.

BUGS
Environment variables that contain the ASCII character SOH (also known as '\001', or CTRL-A) will be split into lists at that character in descendant rc processes.

There is a compile-time limit on the number of separated commands in a line: usually 500. This is sometimes a problem for automatically generated scripts: substituting the newline character for avoids the limit.

On modern systems that support or style redirection is implemented that way. However, on other systems it is implemented with named pipes, and it is sometimes possible to foil rc into removing the FIFO it places in prematurely, or it is even possible to cause rc to hang.

The functionality of shift should be available for variables other than

echo is built in only for performance reasons, which is a bad idea.

There should be a way to avoid exporting a variable.

The notation for flattening should allow for using an arbitrary separating character, not just space.

It is usually possible to use parentheses to defeat free caret insertion; that is, to use as a synonym for However, the former syntax is not correctly handled in functions exported to the environment: a function defined using this syntax will not work properly in descendant rc processes.

List definitions in exported functions are "noisier" than they need to be.

Bug reports should be mailed to

INCOMPATIBILITIES
Here is a list of features which distinguish this incarnation of rc from the one described in the Bell Labs manual pages:

The v10 rc does not have the else keyword. Instead, if is optionally followed by an if not clause which is executed if the preceding if test does not succeed.

Backquotes are slightly different in v10 rc: a backquote must always be followed by a left-brace. This restriction is not present for single-word commands in this rc.

The list flattening operator, is spelt in those versions of the Bell Labs rc which have it.

The following are all new with this version of rc: The flag, here strings (they facilitate exporting of functions with here documents into the environment), the return and break keywords, the echo builtin, the support for the GNU readline(3) library and the support for the function. This rc also sets to the name of a function being executed/file being sourced.

SEE ALSO
``rc — A Shell for Plan 9 and UNIX Systems'', Unix Research System, 10th Edition, vol. 2. (Saunders College Publishing) (This paper is also distributed with this rc in PostScript form.)

history(1)