# -*-makefile-*-
# $PostgreSQL: pgsql/src/Makefile.global.in,v 1.220 2005/09/27 17:39:32 tgl Exp $

#------------------------------------------------------------------------------
# All PostgreSQL makefiles include this file and use the variables it sets,
# which in turn are put here by the configure script. There is no need for
# users to edit this file -- if it turns out to be necessary then that's a
# bug.
#
# A makefile that includes this file needs to set the variable `subdir' to
# the relative path from the top to itself and `top_builddir' to the relative
# path from itself to the top before including this file. (The "top" is the
# parent directory of the directory this file is in.)
#------------------------------------------------------------------------------


##########################################################################
#
# Meta configuration

.PHONY: all install install-strip installdirs uninstall clean distclean maintainer-clean distprep check installcheck maintainer-check
.SILENT: installdirs

# make `all' the default target
all:

# Delete target files if the command fails after it has
# started to update the file.
.DELETE_ON_ERROR:

# PostgreSQL version number
VERSION = 8.1.9

# Support for VPATH builds
vpath_build = no
abs_top_srcdir = /usr/obj/ports/postgresql-8.1.9/postgresql-8.1.9/src/..

ifneq ($(vpath_build),yes)
top_srcdir = $(top_builddir)
srcdir = .
else # vpath_build = yes
top_srcdir = $(abs_top_srcdir)
srcdir = $(top_srcdir)/$(subdir)

endif

# Saved arguments from configure
configure_args = '--disable-rpath' '--with-openssl=/usr' '--with-perl' '--enable-integer-datetimes' '--includedir=/usr/local/include/postgresql' '--datadir=/usr/local/share/postgresql' '--with-docdir=/usr/local/share/doc/postgresql' '--with-openssl' '--with-krb5' '--with-includes=/usr/include/kerberosV' '--prefix=/usr/local' '--sysconfdir=/etc' '--mandir=/usr/local/man' '--infodir=/usr/local/info' 'CC=cc' 'CFLAGS=-O2 -pipe -Wformat -Wbounded'


##########################################################################
#
# Installation directories
#
# These are set by the equivalent --xxxdir configure options.  We
# append "postgresql" to some of them, if the string does not already
# contain "pgsql" or "postgres", in order to avoid directory clutter.
#
# In a PGXS build, we cannot use the values inserted into Makefile.global
# by configure, since the installation tree may have been relocated.
# Instead get the path values from pg_config.

ifndef PGXS

# Note that prefix and exec_prefix aren't defined in a PGXS build;
# makefiles may only use the derived variables such as bindir.

prefix := /usr/local
exec_prefix := ${prefix}

bindir := ${exec_prefix}/bin

datadir := /usr/local/share/postgresql
ifeq "$(findstring pgsql, $(datadir))" ""
ifeq "$(findstring postgres, $(datadir))" ""
override datadir := $(datadir)/postgresql
endif
endif

sysconfdir := /etc
ifeq "$(findstring pgsql, $(sysconfdir))" ""
ifeq "$(findstring postgres, $(sysconfdir))" ""
override sysconfdir := $(sysconfdir)/postgresql
endif
endif

libdir := ${exec_prefix}/lib

pkglibdir = $(libdir)
ifeq "$(findstring pgsql, $(pkglibdir))" ""
ifeq "$(findstring postgres, $(pkglibdir))" ""
override pkglibdir := $(pkglibdir)/postgresql
endif
endif

includedir := /usr/local/include/postgresql

pkgincludedir = $(includedir)
ifeq "$(findstring pgsql, $(pkgincludedir))" ""
ifeq "$(findstring postgres, $(pkgincludedir))" ""
override pkgincludedir := $(pkgincludedir)/postgresql
endif
endif

mandir := /usr/local/man

docdir := /usr/local/share/doc/postgresql
# docdir can be an empty string to signify --without-docdir
ifneq (,$(docdir))
ifeq "$(findstring pgsql, $(docdir))" ""
ifeq "$(findstring postgres, $(docdir))" ""
override docdir := $(docdir)/postgresql
endif
endif
endif

localedir := 

else # PGXS case

bindir := $(shell pg_config --bindir)
datadir := $(shell pg_config --sharedir)
sysconfdir := $(shell pg_config --sysconfdir)
libdir := $(shell pg_config --libdir)
pkglibdir := $(shell pg_config --pkglibdir)
includedir := $(shell pg_config --includedir)
pkgincludedir := $(shell pg_config --pkgincludedir)
mandir := $(shell pg_config --mandir)
docdir := $(shell pg_config --docdir)
localedir := $(shell pg_config --localedir)

endif # PGXS

# These derived path variables aren't separately configurable.

includedir_server = $(pkgincludedir)/server
includedir_internal = $(pkgincludedir)/internal
pgxsdir = $(pkglibdir)/pgxs

sqlmansect_dummy = l


##########################################################################
#
# Features
#
# Records the choice of the various --enable-xxx and --with-xxx options.

with_perl	= yes
with_python	= no
with_tcl	= no
with_openssl	= yes
with_zlib	= yes
enable_shared	= yes
enable_rpath	= no
enable_nls	= no
enable_debug	= no
enable_thread_safety	= no

python_includespec	= 
python_libdir		= 
python_libspec		= 
python_additional_libs	= 
python_configdir	= 
python_version		= 

krb_srvtab = FILE:$(sysconfdir)/krb5.keytab

TCLSH			= 
TCL_LIB_FILE		= 
TCL_LIBS		= 
TCL_LIB_SPEC		= 
TCL_INCLUDE_SPEC	= 
TCL_SHARED_BUILD	= 
TCL_SHLIB_LD_LIBS	= 

PTHREAD_CFLAGS		= 
PTHREAD_LIBS		= 

have_docbook	= no
DOCBOOKSTYLE	= 
COLLATEINDEX	= 


##########################################################################
#
# Programs and flags

# Compilers

CPP = cc -E
CPPFLAGS =   -I/usr/include/kerberosV

ifdef PGXS
override CPPFLAGS := -I$(includedir_server) -I$(includedir_internal) $(CPPFLAGS)
else # not PGXS
override CPPFLAGS := -I$(top_srcdir)/src/include $(CPPFLAGS)
ifdef VPATH
override CPPFLAGS := -I$(top_builddir)/src/include $(CPPFLAGS)
endif
endif # not PGXS

CC = cc
GCC = yes
CFLAGS = -O2 -pipe -Wformat -Wbounded -Wall -Wmissing-prototypes -Wpointer-arith -Winline -Wendif-labels -fno-strict-aliasing

# Kind-of compilers

YACC = yacc
YFLAGS = 
FLEX = /usr/bin/flex
FLEXFLAGS =  $(LFLAGS)

# Linking

LIBS = -lssl -lcrypto -lcom_err -lssl -lcrypto -lz -lreadline -ltermcap -lcompat -lm -lutil 
LD = /usr/bin/ld
with_gnu_ld = yes
ld_R_works = 
LDFLAGS =  
LDFLAGS_SL = 
LDREL = -r
LDOUT = -o
RANLIB = ranlib
LORDER = lorder
X = 

# Perl 

# quoted for pathname with spaces
PERL			= "/usr/bin/perl"
perl_archlibexp		= /usr/libdata/perl5/i386-openbsd/5.8.8
perl_privlibexp		= /usr/libdata/perl5
perl_useshrplib		= true
perl_embed_ldflags	=  -Wl,-E  /usr/libdata/perl5/i386-openbsd/5.8.8/auto/DynaLoader/DynaLoader.a -L/usr/libdata/perl5/i386-openbsd/5.8.8/CORE -lperl -lm -lutil -lc

# Miscellaneous

AWK	= nawk
LN_S	= ln -s
MSGFMT  = 
MSGMERGE = 
PYTHON	= 
TAR	= /bin/tar
XGETTEXT = 

GZIP	= gzip
BZIP2	= bzip2

PL_TESTDB = pl_regression
CONTRIB_TESTDB = contrib_regression

# Installation.

INSTALL	= $(SHELL) $(top_srcdir)/config/install-sh -c

INSTALL_SCRIPT_MODE	= 755
INSTALL_DATA_MODE	= 644
INSTALL_PROGRAM	= $(INSTALL_PROGRAM_ENV) $(INSTALL) $(INSTALL_STRIP_FLAG)
INSTALL_SCRIPT	= $(INSTALL) -m $(INSTALL_SCRIPT_MODE)
INSTALL_DATA	= $(INSTALL) -m $(INSTALL_DATA_MODE)
INSTALL_STLIB	= $(INSTALL_STLIB_ENV) $(INSTALL_DATA) $(INSTALL_STRIP_FLAG)
INSTALL_SHLIB	= $(INSTALL_SHLIB_ENV) $(INSTALL) $(INSTALL_SHLIB_OPTS) $(INSTALL_STRIP_FLAG)
# Override in Makefile.port if necessary
INSTALL_SHLIB_OPTS = -m 755

mkinstalldirs	= $(SHELL) $(top_srcdir)/config/mkinstalldirs
missing		= $(SHELL) $(top_srcdir)/config/missing

STRIP		= strip
STRIP_STATIC_LIB = strip -x
STRIP_SHARED_LIB = strip --strip-unneeded

# Documentation

JADE	= 
NSGMLS	= 
SGMLSPL	= 

# Feature settings

DEF_PGPORT = 5432
WANTED_LANGUAGES = 


##########################################################################
#
# Additional platform-specific settings
#

# Name of the "template"
PORTNAME= openbsd

host_tuple = i386-unknown-openbsd4.0
host_os = openbsd4.0
host_cpu = i386

# Make HAVE_IPV6 available for initdb script creation
HAVE_IPV6= yes

# The HP-UX port makefile, for one, needs access to this symbol
HAVE_POSIX_SIGNALS= yes

# This is mainly for use on FreeBSD, where we have both a.out and elf
# systems now.  May be applicable to other systems to?
ELF_SYSTEM= true

# Pull in platform-specific magic
include $(top_builddir)/src/Makefile.port

# Set up rpath if enabled.  By default it will point to our libdir,
# but individual Makefiles can force other rpath paths if needed.
rpathdir = $(libdir)

ifeq ($(enable_rpath), yes)
LDFLAGS += $(rpath)
endif


##########################################################################
#
# Some variables needed to find some client interfaces

ifdef PGXS
# some contribs assumes headers and libs are in the source tree...
libpq_srcdir = $(includedir)
libpq_builddir = $(libdir)
else
libpq_srcdir = $(top_srcdir)/src/interfaces/libpq
libpq_builddir = $(top_builddir)/src/interfaces/libpq
endif

# This is for use for libraries linking to libpq.  Because libpqport
# isn't created with the same link flags as libpq, it can't be used.
libpq = -L$(libpq_builddir) -lpq
  
# If doing static linking, shared library dependency can't be
# used so we specify pthread libs for every usage of libpq
ifeq ($(enable_shared), no)
libpq += $(PTHREAD_LIBS)
else
# AIX libraries do not remember their required libs so we have to force
# thread dependent libraires in the link
ifeq ($(PORTNAME), aix)
libpq += $(PTHREAD_LIBS)
endif
endif

# Force clients to pull symbols from the non-shared library libpgport 
# rather than pulling some libpgport symbols from libpq just because 
# libpq uses those functions too.  This makes applications less 
# dependent on changes in libpq's usage of pgport.  To do this we link to
# pgport before libpq.  This does cause duplicate -lpgport's to appear
# on client link lines.
ifdef PGXS
libpq_pgport = -L$(libdir) -lpgport $(libpq)
else
libpq_pgport = -L$(top_builddir)/src/port -lpgport $(libpq)
endif


submake-libpq:
	$(MAKE) -C $(libpq_builddir) all

submake-libpgport:
	$(MAKE) -C $(top_builddir)/src/port all

.PHONY: submake-libpq submake-libpgport


##########################################################################
#
# Customization
#
# This includes your local customizations if Makefile.custom exists
# in the source directory.  This file doesn't exist in the original
# distribution so that it doesn't get overwritten when you upgrade.
#
# NOTE:  Makefile.custom is from the pre-Autoconf days of PostgreSQL.
# You are liable to shoot yourself in the foot if you use it without
# knowing exactly what you're doing.  The preferred (and more
# reliable) method is to communicate what you want to do to the
# configure script, and leave the makefiles alone.

-include $(top_srcdir)/src/Makefile.custom

ifneq ($(CUSTOM_INSTALL),)
INSTALL= $(CUSTOM_INSTALL)
endif

ifneq ($(CUSTOM_CC),)
  CC= $(CUSTOM_CC)
endif

ifneq ($(CUSTOM_COPT),)
  COPT= $(CUSTOM_COPT)
endif

ifdef COPT
   CFLAGS += $(COPT)
   LDFLAGS += $(COPT)
endif

ifdef PROFILE
   CFLAGS += $(PROFILE)
   LDFLAGS += $(PROFILE)
endif


##########################################################################
#
# substitute implementations of C library routines (see src/port/)

LIBOBJS =  copydir.o dirmod.o exec.o noblock.o path.o pipe.o pgsleep.o pgstrcasecmp.o sprompt.o thread.o

LIBS := -lpgport $(LIBS)
# add location of libpgport.a to LDFLAGS
ifdef PGXS
override LDFLAGS := -L$(libdir) $(LDFLAGS)
else
override LDFLAGS := -L$(top_builddir)/src/port $(LDFLAGS)
endif

# to make ws2_32.lib the last library, and always link with shfolder,
# so SHGetFolderName isn't picked up from shell32.dll
ifeq ($(PORTNAME),win32)
LIBS += -lws2_32 -lshfolder
endif

# Not really standard libc functions, used by the backend.
TAS         = 


##########################################################################
#
# Global targets and rules

%.gz: %
	$(GZIP) -f --best $<

%.bz2: %
	$(BZIP2) -f $<

ifeq ($(PORTNAME),win32)
# Build rules to add versioninfo resources to win32 binaries
WIN32RES += win32ver.o
ifeq ($(PGFILESHLIB),1)
PGFTYPE=VFT_DLL
else
PGFTYPE=VFT_APP
endif
ifneq (,$(PGAPPICON))
PGICOSTR=$(subst /,\/,IDI_ICON ICON \"$(top_builddir)/src/port/$(PGAPPICON).ico\")
endif
win32ver.rc: $(top_builddir)/src/port/win32ver.rc
	sed -e 's;FILEDESC;$(PGFILEDESC);' -e 's;VFT_APP;$(PGFTYPE);' -e 's;_ICO_;$(PGICOSTR);' -e 's;\(VERSION.*\),0 *$$;\1,'`date '+%y%j' | sed 's/^0*//'`';' $(top_builddir)/src/port/win32ver.rc > win32ver.rc
win32ver.o: $(top_builddir)/src/port/win32ver.rc
	sed -e 's;FILEDESC;$(PGFILEDESC);' -e 's;VFT_APP;$(PGFTYPE);' -e 's;_ICO_;$(PGICOSTR);' -e 's;\(VERSION.*\),0 *$$;\1,'`date '+%y%j' | sed 's/^0*//'`';' $(top_builddir)/src/port/win32ver.rc > win32ver.rc
	windres -i win32ver.rc -o win32ver.o --include-dir=$(top_builddir)/src/include
	rm -f win32ver.rc
endif

ifndef PGXS

# Remake Makefile.global from Makefile.global.in if the latter
# changed. In order to trigger this rule, the including file must
# write `include $(top_builddir)/src/Makefile.global', not some
# shortcut thereof.
$(top_builddir)/src/Makefile.global: $(top_srcdir)/src/Makefile.global.in $(top_builddir)/config.status
	cd $(top_builddir) && ./config.status src/Makefile.global

# Remake pg_config.h from pg_config.h.in if the latter changed.
# config.status will not change the timestamp on pg_config.h if it
# doesn't change, so as to avoid recompiling the entire tree
# unnecessarily. Therefore we make config.status update a timestamp file
# stamp-h everytime it runs, so that we don't trigger this rule everytime.
# (We do trigger the null rule for stamp-h to pg_config.h everytime; so it's
# important for that rule to be null!)
#
# Of course you need to turn on dependency tracking to get any
# dependencies on pg_config.h.
$(top_builddir)/src/include/pg_config.h: $(top_builddir)/src/include/stamp-h

$(top_builddir)/src/include/stamp-h: $(top_srcdir)/src/include/pg_config.h.in $(top_builddir)/config.status
	cd $(top_builddir) && ./config.status src/include/pg_config.h

# When configure changes, rerun configure with the same options as
# last time. To change configure, you need to run autoconf manually.
$(top_builddir)/config.status: $(top_srcdir)/configure
	cd $(top_builddir) && ./config.status --recheck

endif # not PGXS


install-strip:
	@$(MAKE) INSTALL_PROGRAM_ENV="STRIPPROG='$(STRIP)'" \
	    INSTALL_STLIB_ENV="STRIPPROG='$(STRIP_STATIC_LIB)'" \
	    INSTALL_SHLIB_ENV="STRIPPROG='$(STRIP_SHARED_LIB)'" \
	    INSTALL_STRIP_FLAG=-s \
	    install


##########################################################################
#
# Automatic dependency generation
# -------------------------------
# When we configure with --enable-depend then we override the default
# compilation rule with the magic below. While or after creating the
# actual output file we also create a dependency list for the .c file.
# Next time we invoke make we will have top-notch information about
# whether this file needs to be updated. The dependency files are kept
# in the .deps subdirectory of each directory.
#
# The sed command is necessary to post-process the dependency file:
# Each dependency file becomes a target of its own, without
# dependencies or commands. This is because if you happen to remove a
# file that is a dependency (say, you rename a header file) the
# dependency would point to a non-existing file and make would fail.
# But if the file is listed as a target of its own, without
# prerequisites and commands, and doesn't exist then make will
# consider it updated. (That in turn also has the nice side effect
# that make will update all files that depended on the now removed
# file.)

autodepend = 

ifeq ($(autodepend), yes)

ifndef COMPILE.c
COMPILE.c = $(CC) $(CFLAGS) $(CPPFLAGS) -c
endif

DEPDIR = .deps
df = $(DEPDIR)/$(*F)

# This converts a .d file in the current directory to a .P file in the .deps
# subdirectory, with the dummy targets as explained above.
define postprocess-depend
@if test ! -d $(DEPDIR); then mkdir $(DEPDIR); fi
@cp $*.d $(df).P
@sed -e 's/#.*//' -e 's/^[^:]*: *//' -e 's/ *\\$$//' \
     -e '/^$$/ d' -e 's/$$/ :/' < $*.d >> $(df).P
@rm -f $*.d
endef

ifeq ($(GCC), yes)

# GCC allows us to create object and dependency file in one invocation.
%.o : %.c
	$(COMPILE.c) -o $@ $< -MMD
	$(postprocess-depend)

endif # GCC

# Include all the dependency files generated for the current
# directory. List /dev/null as dummy because if the wildcard expands
# to nothing then make would complain.
-include $(wildcard $(DEPDIR)/*.P) /dev/null

# hook for clean-up
clean distclean maintainer-clean: clean-deps

.PHONY: clean-deps
clean-deps:
	@rm -rf $(DEPDIR) *.d

endif # autodepend


##########################################################################
#
# Native language support

ifeq ($(enable_nls), yes)
ifneq (,$(wildcard $(srcdir)/nls.mk))

include $(top_srcdir)/src/nls-global.mk

endif # nls.mk
endif # enable_nls
