#
# Default Bacula Storage Daemon Configuration file
#
#  For Bacula release 2.2.8 (26 January 2008) -- openbsd 4.3
#
# You may need to change the name of your tape drive
#   on the "Archive Device" directive in the Device
#   resource.  If you change the Name and/or the 
#   "Media Type" in the Device resource, please ensure
#   that dird.conf has corresponding changes.
#

Storage {                             # definition of myself
  Name = bacula-sd
  SDPort = 9103                  # Director's port      
  WorkingDirectory = "/var/bacula"
  Pid Directory = "/var/run"
  Maximum Concurrent Jobs = 20
}

#
# List Directors who are permitted to contact Storage daemon
#
Director {
  Name = bacula-dir
  Password = "md2qWuSWxxORQdRn36NRgtI/rEwCiezaf8lqDH0ebImR"
}

#
# Restricted Director, used by tray-monitor to get the
#   status of the storage daemon
#
Director {
  Name = bacula-mon
  Password = "U1wx5wGD12zPyNNpL+OKHXY1Yfg2gXFclRy6yN8y/W/n"
  Monitor = yes
}

#
# Devices supported by this Storage daemon
# To connect, the Director's bacula-dir.conf must have the
#  same Name and MediaType. 
#

Device {
  Name = FileStorage
  Media Type = File
  Archive Device = 
  LabelMedia = yes;                   # lets Bacula label unlabeled media
  Random Access = Yes;
  AutomaticMount = yes;               # when device opened, read it
  RemovableMedia = no;
  AlwaysOpen = no;
}

#
# An autochanger device with two drives
#
#Autochanger {
#  Name = Autochanger
#  Device = Drive-1
#  Device = Drive-2
#  Changer Command = "/usr/local/libexec/bacula/mtx-changer %c %o %S %a %d"
#  Changer Device = /dev/ch0
#}

#Device {
#  Name = Drive-1                      #
#  Drive Index = 0
#  Media Type = DLT-8000
#  Archive Device = /dev/nrst0
#  AutomaticMount = yes;               # when device opened, read it
#  AlwaysOpen = yes;
#  RemovableMedia = yes;
#  RandomAccess = no;
#  AutoChanger = yes
#  #
#  # Enable the Alert command only if you have the mtx package loaded
#  # Note, apparently on some systems, tapeinfo resets the SCSI controller
#  #  thus if you turn this on, make sure it does not reset your SCSI 
#  #  controller.  I have never had any problems, and smartctl does
#  #  not seem to cause such problems.
#  #
#  Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
#  If you have smartctl, enable this, it has more info than tapeinfo 
#  Alert Command = "sh -c 'smartctl -H -l error %c'"  
#}

#Device {
#  Name = Drive-2                      #
#  Drive Index = 1
#  Media Type = DLT-8000
#  Archive Device = /dev/nrst0
#  AutomaticMount = yes;               # when device opened, read it
#  AlwaysOpen = yes;
#  RemovableMedia = yes;
#  RandomAccess = no;
#  AutoChanger = yes
#  # Enable the Alert command only if you have the mtx package loaded
#  Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
#  If you have smartctl, enable this, it has more info than tapeinfo 
#  Alert Command = "sh -c 'smartctl -H -l error %c'"  
#}

#
# A Linux or Solaris tape drive
#
#Device {
#  Name = DDS-4                        # 
#  Media Type = DDS-4
#  Archive Device = /dev/nrst0
#  AutomaticMount = yes;               # when device opened, read it
#  AlwaysOpen = yes;
#  RemovableMedia = yes;
#  RandomAccess = no;
## Changer Command = "/usr/local/libexec/bacula/mtx-changer %c %o %S %a %d"
## Changer Device = /dev/ch0
## AutoChanger = yes
#  # Enable the Alert command only if you have the mtx package loaded
## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
## If you have smartctl, enable this, it has more info than tapeinfo 
## Alert Command = "sh -c 'smartctl -H -l error %c'"  
#}

#
# A FreeBSD tape drive
#
#Device {
#  Name = DDS-4 
#  Description = "DDS-4 for FreeBSD"
#  Media Type = DDS-4
#  Archive Device = /dev/nrst0
#  AutomaticMount = yes;               # when device opened, read it
#  AlwaysOpen = yes
#  Offline On Unmount = no
#  Hardware End of Medium = no
#  BSF at EOM = yes
#  Backward Space Record = no
#  Fast Forward Space File = no
#  TWO EOF = yes
#  If you have smartctl, enable this, it has more info than tapeinfo 
#  Alert Command = "sh -c 'smartctl -H -l error %c'"  
#}

#
# A OnStream tape drive. 
# You need the kernel osst driver 0.9.14 or later, and
#   do "mt -f /dev/nosst0 defblksize 32768" once as root.
#
#Device {
#  Name = OnStream
#  Description = "OnStream drive on Linux"
#  Media Type = OnStream
#  Archive Device = /dev/nrst0
#  AutomaticMount = yes;               # when device opened, read it
#  AlwaysOpen = yes
#  Offline On Unmount = no
## The min/max blocksizes of 32768 are *required*
#  Minimum Block Size = 32768
#  Maximum Block Size = 32768
#  If you have smartctl, enable this, it has more info than tapeinfo 
#  Alert Command = "sh -c 'smartctl -H -l error %c'"  
#}
 
#
# A DVD device
#
#Device {
#  Name = "DVD Writer"
#  Media Type = DVD
#  Device Type = DVD
#  Archive Device = /dev/cd0
#  LabelMedia = yes;                   # lets Bacula label unlabeled media
#  Random Access = Yes;
#  AutomaticMount = yes;               # when device opened, read it
#  RemovableMedia = yes;
#  AlwaysOpen = no;
#  MaximumPartSize = 800M;
#  RequiresMount = yes;
#  MountPoint = /mnt;
#  MountCommand = "/bin/mount -t cd9660 -o ro %a %m";
#  UnmountCommand = "/bin/umount %m";
#  SpoolDirectory = /tmp/backup;
#  WritePartCommand = "/etc/bacula/dvd-handler %a write %e %v"
#  FreeSpaceCommand = "/etc/bacula/dvd-handler %a free"
#}

#
# For OpenBSD OS >= 3.6
#
#Device {
#  Name = DDS-3
#  Media Type = DDS-3
#  Archive Device = /dev/nrst0
#  Use MTIOCGET= no
#  BSF at EOM = yes
#  TWO EOF = no
#  AutomaticMount = yes;
#  AlwaysOpen = yes;
#  RemovableMedia = yes;
#  RandomAccess = no;
#  If you have smartctl, enable this, it has more info than tapeinfo 
#  Alert Command = "sh -c 'smartctl -H -l error %c'"  
#}

#
# A very old Exabyte with no end of media detection
#
#Device {
#  Name = "Exabyte 8mm"
#  Media Type = "8mm"
#  Archive Device = /dev/nrst0
#  Hardware end of medium = No;
#  AutomaticMount = yes;               # when device opened, read it
#  AlwaysOpen = Yes;
#  RemovableMedia = yes;
#  RandomAccess = no;
#  If you have smartctl, enable this, it has more info than tapeinfo 
#  Alert Command = "sh -c 'smartctl -H -l error %c'"  
#}

# 
# Send all messages to the Director, 
# mount messages also are sent to the email address
#
Messages {
  Name = Standard
  director = bacula-dir = all
}
