===============================================================================
# DDCLIENT v3.8.2

ddclient is a Perl client used to update dynamic DNS entries for accounts
on many dynamic DNS services.

===============================================================================

Dynamic DNS services currently supported include:

    DynDNS.com  - See http://www.dyndns.com for details on obtaining a free account.
    Hammernode  - See http://www.hn.org for details on obtaining a free account.
    Zoneedit    - See http://www.zoneedit.com for details.
    EasyDNS     - See http://www.easydns.com for details.
    NameCheap   - See http://www.namecheap.com for details
    ConCont     - See http://www.dydns.za.net for details
    DnsPark     - See http://www.dnspark.com for details
    DslReports  - See http://www.dslreports.com for details
    Sitelutions - See http://www.sitelutions.com for details
    Loopia      - See http://www.loopia.se for details
    Noip        - See http://www.noip.com/ for details
    Freedns     - See http://freedns.afraid.org/ for details
    ChangeIP    - See http://www.changeip.com/ for details
    dtdns       - See http://www.dtdns.com/ for details

DDclient now supports many of cable/dsl broadband routers. 

Comments, suggestions and requests: use the forums on 
	http://sourceforge.net/projects/ddclient/

The code was originally written by Paul Burry and is now hosted and maintained  
through sourceforge.net. Please check out http://ddclient.sf.net

-------------------------------------------------------------------------------
REQUIREMENTS:

- one or more accounts from one of the dynamic DNS services

- Perl 5.004 or later
  (you need the IO::Socket::SSL perl library for ssl-support)

- Linux or probably any common Unix system

-------------------------------------------------------------------------------
INSTALLATION:

    cp ddclient /usr/sbin/
    mkdir /etc/ddclient
    mkdir /var/cache/ddclient
    cp sample-etc_ddclient.conf /etc/ddclient/ddclient.conf
    vi /etc/ddclient/ddclient.conf
    -- and change hostnames, logins, and passwords appropriately

    ## For those using Redhat style rc files and using daemon-mode:
    cp sample-etc_rc.d_init.d_ddclient /etc/rc.d/init.d/ddclient
    ## enable automatic startup when booting
    ## check your distribution
    /sbin/chkconfig --add ddclient
    ## start the first time by hand
    /etc/rc.d/init.d/ddclient start

    ## If you are not using daemon-mode, configure cron and dhcp or ppp
    ## as described below.

-------------------------------------------------------------------------------
TROUBLESHOOTING:

  1. enable debugging and verbose messages.
	 ``$ ddclient -daemon=0 -debug -verbose -noquiet``

  2. Do you need to specify a proxy?
     If so, just add a
	``proxy=your.isp.proxy``
     to the ddclient.conf file.

  3. Define the IP address of your router with ``fw=xxx.xxx.xxx.xxx`` in
     ``/etc/ddclient/ddclient.conf`` and then try
    	``$ ddclient -daemon=0 -query``
     to see if the router status web page can be understood.

  4. Need support for another router/firewall?
     Define the router status page yourself with:
	``fw=url-to-your-router``'s-status-page
	``fw-skip=any-string-preceding-your-IP-address``

     ddclient does something like this to provide builtin support for 
     common routers.
     For example, the Linksys routers could have been added with:
     
        fw=192.168.1.1/Status.htm
	    fw-skip=WAN.*?IP Address

     OR
     Send me the output from:
      $ ddclient -geturl {fw-ip-status-url} [-login login [-password password]]
     and I'll add it to the next release!

     ie. for my fw/router I used:
	$ ddclient -geturl 192.168.1.254/status.htm

  5. Some broadband routers require the use of a password when ddclient
     accesses its status page to determine the router's WAN IP address.
     If this is the case for your router, add
	fw-login=your-router-login
	fw-password=your-router-password
     to the beginning of your ddclient.conf file.
     Note that some routers use either 'root' or 'admin' as their login
     while some others accept anything.

-------------------------------------------------------------------------------
USING DDCLIENT WITH ppp

If you are using a ppp connection, you can easily update your DynDNS
entry with each connection, with:

    ## configure pppd to update DynDNS with each connection
    cp sample-etc_ppp_ip-up.local /etc/ppp/ip-up.local

Alternatively, you may just configure ddclient to operate as a daemon
and monitor your ppp interface.

-------------------------------------------------------------------------------
USING DDCLIENT WITH cron

If you have not configured ddclient to use daemon-mode, you'll need to
configure cron to force an update once a month so that the dns entry will
not become stale.

    ## configure cron to force an update twice a month
    cp sample-etc_cron.d_ddclient /etc/cron.d/ddclient
    vi /etc/cron.d/ddclient

-------------------------------------------------------------------------------
USING DDCLIENT WITH dhcpcd-1.3.17

If you are using dhcpcd-1.3.17 or thereabouts, you can easily update
your DynDNS entry automatically every time your lease is obtained
or renewed by creating an executable file named:
    /etc/dhcpc/dhcpcd-{your-interface}.exe
ie.:
    cp sample-etc_dhcpc_dhcpcd-eth0.exe /etc/dhcpc/dhcpcd-{your-interface}.exe

In my case, it is named dhcpcd-eth0.exe and contains the lines:

    #!/bin/sh
    PATH=/usr/sbin:/root/bin:${PATH}
    logger -t dhcpcd IP address changed to $1
    ddclient -proxy fasthttp.sympatico.ca -wildcard -ip $1 | logger -t ddclient 
    exit 0

Other DHCP clients may have another method of calling out to programs
for updating DNS entries. 

Alternatively, you may just configure ddclient to operate as a daemon
and monitor your ethernet interface.

-------------------------------------------------------------------------------
USING DDCLIENT WITH dhclient

If you are using the ISC DHCP client (dhclient), you can update 
your DynDNS entry automatically every time your lease is obtained
or renewed by creating an executable file named:
    /etc/dhclient-exit-hooks
ie.:
    cp sample-etc_dhclient-exit-hooks /etc/dhclient-exit-hooks

Edit /etc/dhclient-exit-hooks to change any options required.

Alternatively, you may just configure ddclient to operate as a daemon
and monitor your ethernet interface.

-------------------------------------------------------------------------------
$Id: README.md 157 2013-12-26 09:02:05Z wimpunk $
